Loading...
1/*
2 * mm/page-writeback.c
3 *
4 * Copyright (C) 2002, Linus Torvalds.
5 * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra
6 *
7 * Contains functions related to writing back dirty pages at the
8 * address_space level.
9 *
10 * 10Apr2002 Andrew Morton
11 * Initial version
12 */
13
14#include <linux/kernel.h>
15#include <linux/export.h>
16#include <linux/spinlock.h>
17#include <linux/fs.h>
18#include <linux/mm.h>
19#include <linux/swap.h>
20#include <linux/slab.h>
21#include <linux/pagemap.h>
22#include <linux/writeback.h>
23#include <linux/init.h>
24#include <linux/backing-dev.h>
25#include <linux/task_io_accounting_ops.h>
26#include <linux/blkdev.h>
27#include <linux/mpage.h>
28#include <linux/rmap.h>
29#include <linux/percpu.h>
30#include <linux/notifier.h>
31#include <linux/smp.h>
32#include <linux/sysctl.h>
33#include <linux/cpu.h>
34#include <linux/syscalls.h>
35#include <linux/buffer_head.h> /* __set_page_dirty_buffers */
36#include <linux/pagevec.h>
37#include <linux/timer.h>
38#include <linux/sched/rt.h>
39#include <linux/sched/signal.h>
40#include <linux/mm_inline.h>
41#include <trace/events/writeback.h>
42
43#include "internal.h"
44
45/*
46 * Sleep at most 200ms at a time in balance_dirty_pages().
47 */
48#define MAX_PAUSE max(HZ/5, 1)
49
50/*
51 * Try to keep balance_dirty_pages() call intervals higher than this many pages
52 * by raising pause time to max_pause when falls below it.
53 */
54#define DIRTY_POLL_THRESH (128 >> (PAGE_SHIFT - 10))
55
56/*
57 * Estimate write bandwidth at 200ms intervals.
58 */
59#define BANDWIDTH_INTERVAL max(HZ/5, 1)
60
61#define RATELIMIT_CALC_SHIFT 10
62
63/*
64 * After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
65 * will look to see if it needs to force writeback or throttling.
66 */
67static long ratelimit_pages = 32;
68
69/* The following parameters are exported via /proc/sys/vm */
70
71/*
72 * Start background writeback (via writeback threads) at this percentage
73 */
74int dirty_background_ratio = 10;
75
76/*
77 * dirty_background_bytes starts at 0 (disabled) so that it is a function of
78 * dirty_background_ratio * the amount of dirtyable memory
79 */
80unsigned long dirty_background_bytes;
81
82/*
83 * free highmem will not be subtracted from the total free memory
84 * for calculating free ratios if vm_highmem_is_dirtyable is true
85 */
86int vm_highmem_is_dirtyable;
87
88/*
89 * The generator of dirty data starts writeback at this percentage
90 */
91int vm_dirty_ratio = 20;
92
93/*
94 * vm_dirty_bytes starts at 0 (disabled) so that it is a function of
95 * vm_dirty_ratio * the amount of dirtyable memory
96 */
97unsigned long vm_dirty_bytes;
98
99/*
100 * The interval between `kupdate'-style writebacks
101 */
102unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
103
104EXPORT_SYMBOL_GPL(dirty_writeback_interval);
105
106/*
107 * The longest time for which data is allowed to remain dirty
108 */
109unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
110
111/*
112 * Flag that makes the machine dump writes/reads and block dirtyings.
113 */
114int block_dump;
115
116/*
117 * Flag that puts the machine in "laptop mode". Doubles as a timeout in jiffies:
118 * a full sync is triggered after this time elapses without any disk activity.
119 */
120int laptop_mode;
121
122EXPORT_SYMBOL(laptop_mode);
123
124/* End of sysctl-exported parameters */
125
126struct wb_domain global_wb_domain;
127
128/* consolidated parameters for balance_dirty_pages() and its subroutines */
129struct dirty_throttle_control {
130#ifdef CONFIG_CGROUP_WRITEBACK
131 struct wb_domain *dom;
132 struct dirty_throttle_control *gdtc; /* only set in memcg dtc's */
133#endif
134 struct bdi_writeback *wb;
135 struct fprop_local_percpu *wb_completions;
136
137 unsigned long avail; /* dirtyable */
138 unsigned long dirty; /* file_dirty + write + nfs */
139 unsigned long thresh; /* dirty threshold */
140 unsigned long bg_thresh; /* dirty background threshold */
141
142 unsigned long wb_dirty; /* per-wb counterparts */
143 unsigned long wb_thresh;
144 unsigned long wb_bg_thresh;
145
146 unsigned long pos_ratio;
147};
148
149/*
150 * Length of period for aging writeout fractions of bdis. This is an
151 * arbitrarily chosen number. The longer the period, the slower fractions will
152 * reflect changes in current writeout rate.
153 */
154#define VM_COMPLETIONS_PERIOD_LEN (3*HZ)
155
156#ifdef CONFIG_CGROUP_WRITEBACK
157
158#define GDTC_INIT(__wb) .wb = (__wb), \
159 .dom = &global_wb_domain, \
160 .wb_completions = &(__wb)->completions
161
162#define GDTC_INIT_NO_WB .dom = &global_wb_domain
163
164#define MDTC_INIT(__wb, __gdtc) .wb = (__wb), \
165 .dom = mem_cgroup_wb_domain(__wb), \
166 .wb_completions = &(__wb)->memcg_completions, \
167 .gdtc = __gdtc
168
169static bool mdtc_valid(struct dirty_throttle_control *dtc)
170{
171 return dtc->dom;
172}
173
174static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc)
175{
176 return dtc->dom;
177}
178
179static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc)
180{
181 return mdtc->gdtc;
182}
183
184static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)
185{
186 return &wb->memcg_completions;
187}
188
189static void wb_min_max_ratio(struct bdi_writeback *wb,
190 unsigned long *minp, unsigned long *maxp)
191{
192 unsigned long this_bw = wb->avg_write_bandwidth;
193 unsigned long tot_bw = atomic_long_read(&wb->bdi->tot_write_bandwidth);
194 unsigned long long min = wb->bdi->min_ratio;
195 unsigned long long max = wb->bdi->max_ratio;
196
197 /*
198 * @wb may already be clean by the time control reaches here and
199 * the total may not include its bw.
200 */
201 if (this_bw < tot_bw) {
202 if (min) {
203 min *= this_bw;
204 do_div(min, tot_bw);
205 }
206 if (max < 100) {
207 max *= this_bw;
208 do_div(max, tot_bw);
209 }
210 }
211
212 *minp = min;
213 *maxp = max;
214}
215
216#else /* CONFIG_CGROUP_WRITEBACK */
217
218#define GDTC_INIT(__wb) .wb = (__wb), \
219 .wb_completions = &(__wb)->completions
220#define GDTC_INIT_NO_WB
221#define MDTC_INIT(__wb, __gdtc)
222
223static bool mdtc_valid(struct dirty_throttle_control *dtc)
224{
225 return false;
226}
227
228static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc)
229{
230 return &global_wb_domain;
231}
232
233static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc)
234{
235 return NULL;
236}
237
238static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)
239{
240 return NULL;
241}
242
243static void wb_min_max_ratio(struct bdi_writeback *wb,
244 unsigned long *minp, unsigned long *maxp)
245{
246 *minp = wb->bdi->min_ratio;
247 *maxp = wb->bdi->max_ratio;
248}
249
250#endif /* CONFIG_CGROUP_WRITEBACK */
251
252/*
253 * In a memory zone, there is a certain amount of pages we consider
254 * available for the page cache, which is essentially the number of
255 * free and reclaimable pages, minus some zone reserves to protect
256 * lowmem and the ability to uphold the zone's watermarks without
257 * requiring writeback.
258 *
259 * This number of dirtyable pages is the base value of which the
260 * user-configurable dirty ratio is the effictive number of pages that
261 * are allowed to be actually dirtied. Per individual zone, or
262 * globally by using the sum of dirtyable pages over all zones.
263 *
264 * Because the user is allowed to specify the dirty limit globally as
265 * absolute number of bytes, calculating the per-zone dirty limit can
266 * require translating the configured limit into a percentage of
267 * global dirtyable memory first.
268 */
269
270/**
271 * node_dirtyable_memory - number of dirtyable pages in a node
272 * @pgdat: the node
273 *
274 * Returns the node's number of pages potentially available for dirty
275 * page cache. This is the base value for the per-node dirty limits.
276 */
277static unsigned long node_dirtyable_memory(struct pglist_data *pgdat)
278{
279 unsigned long nr_pages = 0;
280 int z;
281
282 for (z = 0; z < MAX_NR_ZONES; z++) {
283 struct zone *zone = pgdat->node_zones + z;
284
285 if (!populated_zone(zone))
286 continue;
287
288 nr_pages += zone_page_state(zone, NR_FREE_PAGES);
289 }
290
291 /*
292 * Pages reserved for the kernel should not be considered
293 * dirtyable, to prevent a situation where reclaim has to
294 * clean pages in order to balance the zones.
295 */
296 nr_pages -= min(nr_pages, pgdat->totalreserve_pages);
297
298 nr_pages += node_page_state(pgdat, NR_INACTIVE_FILE);
299 nr_pages += node_page_state(pgdat, NR_ACTIVE_FILE);
300
301 return nr_pages;
302}
303
304static unsigned long highmem_dirtyable_memory(unsigned long total)
305{
306#ifdef CONFIG_HIGHMEM
307 int node;
308 unsigned long x = 0;
309 int i;
310
311 for_each_node_state(node, N_HIGH_MEMORY) {
312 for (i = ZONE_NORMAL + 1; i < MAX_NR_ZONES; i++) {
313 struct zone *z;
314 unsigned long nr_pages;
315
316 if (!is_highmem_idx(i))
317 continue;
318
319 z = &NODE_DATA(node)->node_zones[i];
320 if (!populated_zone(z))
321 continue;
322
323 nr_pages = zone_page_state(z, NR_FREE_PAGES);
324 /* watch for underflows */
325 nr_pages -= min(nr_pages, high_wmark_pages(z));
326 nr_pages += zone_page_state(z, NR_ZONE_INACTIVE_FILE);
327 nr_pages += zone_page_state(z, NR_ZONE_ACTIVE_FILE);
328 x += nr_pages;
329 }
330 }
331
332 /*
333 * Unreclaimable memory (kernel memory or anonymous memory
334 * without swap) can bring down the dirtyable pages below
335 * the zone's dirty balance reserve and the above calculation
336 * will underflow. However we still want to add in nodes
337 * which are below threshold (negative values) to get a more
338 * accurate calculation but make sure that the total never
339 * underflows.
340 */
341 if ((long)x < 0)
342 x = 0;
343
344 /*
345 * Make sure that the number of highmem pages is never larger
346 * than the number of the total dirtyable memory. This can only
347 * occur in very strange VM situations but we want to make sure
348 * that this does not occur.
349 */
350 return min(x, total);
351#else
352 return 0;
353#endif
354}
355
356/**
357 * global_dirtyable_memory - number of globally dirtyable pages
358 *
359 * Returns the global number of pages potentially available for dirty
360 * page cache. This is the base value for the global dirty limits.
361 */
362static unsigned long global_dirtyable_memory(void)
363{
364 unsigned long x;
365
366 x = global_zone_page_state(NR_FREE_PAGES);
367 /*
368 * Pages reserved for the kernel should not be considered
369 * dirtyable, to prevent a situation where reclaim has to
370 * clean pages in order to balance the zones.
371 */
372 x -= min(x, totalreserve_pages);
373
374 x += global_node_page_state(NR_INACTIVE_FILE);
375 x += global_node_page_state(NR_ACTIVE_FILE);
376
377 if (!vm_highmem_is_dirtyable)
378 x -= highmem_dirtyable_memory(x);
379
380 return x + 1; /* Ensure that we never return 0 */
381}
382
383/**
384 * domain_dirty_limits - calculate thresh and bg_thresh for a wb_domain
385 * @dtc: dirty_throttle_control of interest
386 *
387 * Calculate @dtc->thresh and ->bg_thresh considering
388 * vm_dirty_{bytes|ratio} and dirty_background_{bytes|ratio}. The caller
389 * must ensure that @dtc->avail is set before calling this function. The
390 * dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and
391 * real-time tasks.
392 */
393static void domain_dirty_limits(struct dirty_throttle_control *dtc)
394{
395 const unsigned long available_memory = dtc->avail;
396 struct dirty_throttle_control *gdtc = mdtc_gdtc(dtc);
397 unsigned long bytes = vm_dirty_bytes;
398 unsigned long bg_bytes = dirty_background_bytes;
399 /* convert ratios to per-PAGE_SIZE for higher precision */
400 unsigned long ratio = (vm_dirty_ratio * PAGE_SIZE) / 100;
401 unsigned long bg_ratio = (dirty_background_ratio * PAGE_SIZE) / 100;
402 unsigned long thresh;
403 unsigned long bg_thresh;
404 struct task_struct *tsk;
405
406 /* gdtc is !NULL iff @dtc is for memcg domain */
407 if (gdtc) {
408 unsigned long global_avail = gdtc->avail;
409
410 /*
411 * The byte settings can't be applied directly to memcg
412 * domains. Convert them to ratios by scaling against
413 * globally available memory. As the ratios are in
414 * per-PAGE_SIZE, they can be obtained by dividing bytes by
415 * number of pages.
416 */
417 if (bytes)
418 ratio = min(DIV_ROUND_UP(bytes, global_avail),
419 PAGE_SIZE);
420 if (bg_bytes)
421 bg_ratio = min(DIV_ROUND_UP(bg_bytes, global_avail),
422 PAGE_SIZE);
423 bytes = bg_bytes = 0;
424 }
425
426 if (bytes)
427 thresh = DIV_ROUND_UP(bytes, PAGE_SIZE);
428 else
429 thresh = (ratio * available_memory) / PAGE_SIZE;
430
431 if (bg_bytes)
432 bg_thresh = DIV_ROUND_UP(bg_bytes, PAGE_SIZE);
433 else
434 bg_thresh = (bg_ratio * available_memory) / PAGE_SIZE;
435
436 if (bg_thresh >= thresh)
437 bg_thresh = thresh / 2;
438 tsk = current;
439 if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) {
440 bg_thresh += bg_thresh / 4 + global_wb_domain.dirty_limit / 32;
441 thresh += thresh / 4 + global_wb_domain.dirty_limit / 32;
442 }
443 dtc->thresh = thresh;
444 dtc->bg_thresh = bg_thresh;
445
446 /* we should eventually report the domain in the TP */
447 if (!gdtc)
448 trace_global_dirty_state(bg_thresh, thresh);
449}
450
451/**
452 * global_dirty_limits - background-writeback and dirty-throttling thresholds
453 * @pbackground: out parameter for bg_thresh
454 * @pdirty: out parameter for thresh
455 *
456 * Calculate bg_thresh and thresh for global_wb_domain. See
457 * domain_dirty_limits() for details.
458 */
459void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
460{
461 struct dirty_throttle_control gdtc = { GDTC_INIT_NO_WB };
462
463 gdtc.avail = global_dirtyable_memory();
464 domain_dirty_limits(&gdtc);
465
466 *pbackground = gdtc.bg_thresh;
467 *pdirty = gdtc.thresh;
468}
469
470/**
471 * node_dirty_limit - maximum number of dirty pages allowed in a node
472 * @pgdat: the node
473 *
474 * Returns the maximum number of dirty pages allowed in a node, based
475 * on the node's dirtyable memory.
476 */
477static unsigned long node_dirty_limit(struct pglist_data *pgdat)
478{
479 unsigned long node_memory = node_dirtyable_memory(pgdat);
480 struct task_struct *tsk = current;
481 unsigned long dirty;
482
483 if (vm_dirty_bytes)
484 dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE) *
485 node_memory / global_dirtyable_memory();
486 else
487 dirty = vm_dirty_ratio * node_memory / 100;
488
489 if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk))
490 dirty += dirty / 4;
491
492 return dirty;
493}
494
495/**
496 * node_dirty_ok - tells whether a node is within its dirty limits
497 * @pgdat: the node to check
498 *
499 * Returns %true when the dirty pages in @pgdat are within the node's
500 * dirty limit, %false if the limit is exceeded.
501 */
502bool node_dirty_ok(struct pglist_data *pgdat)
503{
504 unsigned long limit = node_dirty_limit(pgdat);
505 unsigned long nr_pages = 0;
506
507 nr_pages += node_page_state(pgdat, NR_FILE_DIRTY);
508 nr_pages += node_page_state(pgdat, NR_UNSTABLE_NFS);
509 nr_pages += node_page_state(pgdat, NR_WRITEBACK);
510
511 return nr_pages <= limit;
512}
513
514int dirty_background_ratio_handler(struct ctl_table *table, int write,
515 void __user *buffer, size_t *lenp,
516 loff_t *ppos)
517{
518 int ret;
519
520 ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
521 if (ret == 0 && write)
522 dirty_background_bytes = 0;
523 return ret;
524}
525
526int dirty_background_bytes_handler(struct ctl_table *table, int write,
527 void __user *buffer, size_t *lenp,
528 loff_t *ppos)
529{
530 int ret;
531
532 ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
533 if (ret == 0 && write)
534 dirty_background_ratio = 0;
535 return ret;
536}
537
538int dirty_ratio_handler(struct ctl_table *table, int write,
539 void __user *buffer, size_t *lenp,
540 loff_t *ppos)
541{
542 int old_ratio = vm_dirty_ratio;
543 int ret;
544
545 ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
546 if (ret == 0 && write && vm_dirty_ratio != old_ratio) {
547 writeback_set_ratelimit();
548 vm_dirty_bytes = 0;
549 }
550 return ret;
551}
552
553int dirty_bytes_handler(struct ctl_table *table, int write,
554 void __user *buffer, size_t *lenp,
555 loff_t *ppos)
556{
557 unsigned long old_bytes = vm_dirty_bytes;
558 int ret;
559
560 ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
561 if (ret == 0 && write && vm_dirty_bytes != old_bytes) {
562 writeback_set_ratelimit();
563 vm_dirty_ratio = 0;
564 }
565 return ret;
566}
567
568static unsigned long wp_next_time(unsigned long cur_time)
569{
570 cur_time += VM_COMPLETIONS_PERIOD_LEN;
571 /* 0 has a special meaning... */
572 if (!cur_time)
573 return 1;
574 return cur_time;
575}
576
577static void wb_domain_writeout_inc(struct wb_domain *dom,
578 struct fprop_local_percpu *completions,
579 unsigned int max_prop_frac)
580{
581 __fprop_inc_percpu_max(&dom->completions, completions,
582 max_prop_frac);
583 /* First event after period switching was turned off? */
584 if (unlikely(!dom->period_time)) {
585 /*
586 * We can race with other __bdi_writeout_inc calls here but
587 * it does not cause any harm since the resulting time when
588 * timer will fire and what is in writeout_period_time will be
589 * roughly the same.
590 */
591 dom->period_time = wp_next_time(jiffies);
592 mod_timer(&dom->period_timer, dom->period_time);
593 }
594}
595
596/*
597 * Increment @wb's writeout completion count and the global writeout
598 * completion count. Called from test_clear_page_writeback().
599 */
600static inline void __wb_writeout_inc(struct bdi_writeback *wb)
601{
602 struct wb_domain *cgdom;
603
604 inc_wb_stat(wb, WB_WRITTEN);
605 wb_domain_writeout_inc(&global_wb_domain, &wb->completions,
606 wb->bdi->max_prop_frac);
607
608 cgdom = mem_cgroup_wb_domain(wb);
609 if (cgdom)
610 wb_domain_writeout_inc(cgdom, wb_memcg_completions(wb),
611 wb->bdi->max_prop_frac);
612}
613
614void wb_writeout_inc(struct bdi_writeback *wb)
615{
616 unsigned long flags;
617
618 local_irq_save(flags);
619 __wb_writeout_inc(wb);
620 local_irq_restore(flags);
621}
622EXPORT_SYMBOL_GPL(wb_writeout_inc);
623
624/*
625 * On idle system, we can be called long after we scheduled because we use
626 * deferred timers so count with missed periods.
627 */
628static void writeout_period(struct timer_list *t)
629{
630 struct wb_domain *dom = from_timer(dom, t, period_timer);
631 int miss_periods = (jiffies - dom->period_time) /
632 VM_COMPLETIONS_PERIOD_LEN;
633
634 if (fprop_new_period(&dom->completions, miss_periods + 1)) {
635 dom->period_time = wp_next_time(dom->period_time +
636 miss_periods * VM_COMPLETIONS_PERIOD_LEN);
637 mod_timer(&dom->period_timer, dom->period_time);
638 } else {
639 /*
640 * Aging has zeroed all fractions. Stop wasting CPU on period
641 * updates.
642 */
643 dom->period_time = 0;
644 }
645}
646
647int wb_domain_init(struct wb_domain *dom, gfp_t gfp)
648{
649 memset(dom, 0, sizeof(*dom));
650
651 spin_lock_init(&dom->lock);
652
653 timer_setup(&dom->period_timer, writeout_period, TIMER_DEFERRABLE);
654
655 dom->dirty_limit_tstamp = jiffies;
656
657 return fprop_global_init(&dom->completions, gfp);
658}
659
660#ifdef CONFIG_CGROUP_WRITEBACK
661void wb_domain_exit(struct wb_domain *dom)
662{
663 del_timer_sync(&dom->period_timer);
664 fprop_global_destroy(&dom->completions);
665}
666#endif
667
668/*
669 * bdi_min_ratio keeps the sum of the minimum dirty shares of all
670 * registered backing devices, which, for obvious reasons, can not
671 * exceed 100%.
672 */
673static unsigned int bdi_min_ratio;
674
675int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
676{
677 int ret = 0;
678
679 spin_lock_bh(&bdi_lock);
680 if (min_ratio > bdi->max_ratio) {
681 ret = -EINVAL;
682 } else {
683 min_ratio -= bdi->min_ratio;
684 if (bdi_min_ratio + min_ratio < 100) {
685 bdi_min_ratio += min_ratio;
686 bdi->min_ratio += min_ratio;
687 } else {
688 ret = -EINVAL;
689 }
690 }
691 spin_unlock_bh(&bdi_lock);
692
693 return ret;
694}
695
696int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio)
697{
698 int ret = 0;
699
700 if (max_ratio > 100)
701 return -EINVAL;
702
703 spin_lock_bh(&bdi_lock);
704 if (bdi->min_ratio > max_ratio) {
705 ret = -EINVAL;
706 } else {
707 bdi->max_ratio = max_ratio;
708 bdi->max_prop_frac = (FPROP_FRAC_BASE * max_ratio) / 100;
709 }
710 spin_unlock_bh(&bdi_lock);
711
712 return ret;
713}
714EXPORT_SYMBOL(bdi_set_max_ratio);
715
716static unsigned long dirty_freerun_ceiling(unsigned long thresh,
717 unsigned long bg_thresh)
718{
719 return (thresh + bg_thresh) / 2;
720}
721
722static unsigned long hard_dirty_limit(struct wb_domain *dom,
723 unsigned long thresh)
724{
725 return max(thresh, dom->dirty_limit);
726}
727
728/*
729 * Memory which can be further allocated to a memcg domain is capped by
730 * system-wide clean memory excluding the amount being used in the domain.
731 */
732static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
733 unsigned long filepages, unsigned long headroom)
734{
735 struct dirty_throttle_control *gdtc = mdtc_gdtc(mdtc);
736 unsigned long clean = filepages - min(filepages, mdtc->dirty);
737 unsigned long global_clean = gdtc->avail - min(gdtc->avail, gdtc->dirty);
738 unsigned long other_clean = global_clean - min(global_clean, clean);
739
740 mdtc->avail = filepages + min(headroom, other_clean);
741}
742
743/**
744 * __wb_calc_thresh - @wb's share of dirty throttling threshold
745 * @dtc: dirty_throttle_context of interest
746 *
747 * Returns @wb's dirty limit in pages. The term "dirty" in the context of
748 * dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages.
749 *
750 * Note that balance_dirty_pages() will only seriously take it as a hard limit
751 * when sleeping max_pause per page is not enough to keep the dirty pages under
752 * control. For example, when the device is completely stalled due to some error
753 * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key.
754 * In the other normal situations, it acts more gently by throttling the tasks
755 * more (rather than completely block them) when the wb dirty pages go high.
756 *
757 * It allocates high/low dirty limits to fast/slow devices, in order to prevent
758 * - starving fast devices
759 * - piling up dirty pages (that will take long time to sync) on slow devices
760 *
761 * The wb's share of dirty limit will be adapting to its throughput and
762 * bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set.
763 */
764static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc)
765{
766 struct wb_domain *dom = dtc_dom(dtc);
767 unsigned long thresh = dtc->thresh;
768 u64 wb_thresh;
769 long numerator, denominator;
770 unsigned long wb_min_ratio, wb_max_ratio;
771
772 /*
773 * Calculate this BDI's share of the thresh ratio.
774 */
775 fprop_fraction_percpu(&dom->completions, dtc->wb_completions,
776 &numerator, &denominator);
777
778 wb_thresh = (thresh * (100 - bdi_min_ratio)) / 100;
779 wb_thresh *= numerator;
780 do_div(wb_thresh, denominator);
781
782 wb_min_max_ratio(dtc->wb, &wb_min_ratio, &wb_max_ratio);
783
784 wb_thresh += (thresh * wb_min_ratio) / 100;
785 if (wb_thresh > (thresh * wb_max_ratio) / 100)
786 wb_thresh = thresh * wb_max_ratio / 100;
787
788 return wb_thresh;
789}
790
791unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh)
792{
793 struct dirty_throttle_control gdtc = { GDTC_INIT(wb),
794 .thresh = thresh };
795 return __wb_calc_thresh(&gdtc);
796}
797
798/*
799 * setpoint - dirty 3
800 * f(dirty) := 1.0 + (----------------)
801 * limit - setpoint
802 *
803 * it's a 3rd order polynomial that subjects to
804 *
805 * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
806 * (2) f(setpoint) = 1.0 => the balance point
807 * (3) f(limit) = 0 => the hard limit
808 * (4) df/dx <= 0 => negative feedback control
809 * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
810 * => fast response on large errors; small oscillation near setpoint
811 */
812static long long pos_ratio_polynom(unsigned long setpoint,
813 unsigned long dirty,
814 unsigned long limit)
815{
816 long long pos_ratio;
817 long x;
818
819 x = div64_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
820 (limit - setpoint) | 1);
821 pos_ratio = x;
822 pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
823 pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
824 pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
825
826 return clamp(pos_ratio, 0LL, 2LL << RATELIMIT_CALC_SHIFT);
827}
828
829/*
830 * Dirty position control.
831 *
832 * (o) global/bdi setpoints
833 *
834 * We want the dirty pages be balanced around the global/wb setpoints.
835 * When the number of dirty pages is higher/lower than the setpoint, the
836 * dirty position control ratio (and hence task dirty ratelimit) will be
837 * decreased/increased to bring the dirty pages back to the setpoint.
838 *
839 * pos_ratio = 1 << RATELIMIT_CALC_SHIFT
840 *
841 * if (dirty < setpoint) scale up pos_ratio
842 * if (dirty > setpoint) scale down pos_ratio
843 *
844 * if (wb_dirty < wb_setpoint) scale up pos_ratio
845 * if (wb_dirty > wb_setpoint) scale down pos_ratio
846 *
847 * task_ratelimit = dirty_ratelimit * pos_ratio >> RATELIMIT_CALC_SHIFT
848 *
849 * (o) global control line
850 *
851 * ^ pos_ratio
852 * |
853 * | |<===== global dirty control scope ======>|
854 * 2.0 .............*
855 * | .*
856 * | . *
857 * | . *
858 * | . *
859 * | . *
860 * | . *
861 * 1.0 ................................*
862 * | . . *
863 * | . . *
864 * | . . *
865 * | . . *
866 * | . . *
867 * 0 +------------.------------------.----------------------*------------->
868 * freerun^ setpoint^ limit^ dirty pages
869 *
870 * (o) wb control line
871 *
872 * ^ pos_ratio
873 * |
874 * | *
875 * | *
876 * | *
877 * | *
878 * | * |<=========== span ============>|
879 * 1.0 .......................*
880 * | . *
881 * | . *
882 * | . *
883 * | . *
884 * | . *
885 * | . *
886 * | . *
887 * | . *
888 * | . *
889 * | . *
890 * | . *
891 * 1/4 ...............................................* * * * * * * * * * * *
892 * | . .
893 * | . .
894 * | . .
895 * 0 +----------------------.-------------------------------.------------->
896 * wb_setpoint^ x_intercept^
897 *
898 * The wb control line won't drop below pos_ratio=1/4, so that wb_dirty can
899 * be smoothly throttled down to normal if it starts high in situations like
900 * - start writing to a slow SD card and a fast disk at the same time. The SD
901 * card's wb_dirty may rush to many times higher than wb_setpoint.
902 * - the wb dirty thresh drops quickly due to change of JBOD workload
903 */
904static void wb_position_ratio(struct dirty_throttle_control *dtc)
905{
906 struct bdi_writeback *wb = dtc->wb;
907 unsigned long write_bw = wb->avg_write_bandwidth;
908 unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
909 unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
910 unsigned long wb_thresh = dtc->wb_thresh;
911 unsigned long x_intercept;
912 unsigned long setpoint; /* dirty pages' target balance point */
913 unsigned long wb_setpoint;
914 unsigned long span;
915 long long pos_ratio; /* for scaling up/down the rate limit */
916 long x;
917
918 dtc->pos_ratio = 0;
919
920 if (unlikely(dtc->dirty >= limit))
921 return;
922
923 /*
924 * global setpoint
925 *
926 * See comment for pos_ratio_polynom().
927 */
928 setpoint = (freerun + limit) / 2;
929 pos_ratio = pos_ratio_polynom(setpoint, dtc->dirty, limit);
930
931 /*
932 * The strictlimit feature is a tool preventing mistrusted filesystems
933 * from growing a large number of dirty pages before throttling. For
934 * such filesystems balance_dirty_pages always checks wb counters
935 * against wb limits. Even if global "nr_dirty" is under "freerun".
936 * This is especially important for fuse which sets bdi->max_ratio to
937 * 1% by default. Without strictlimit feature, fuse writeback may
938 * consume arbitrary amount of RAM because it is accounted in
939 * NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty".
940 *
941 * Here, in wb_position_ratio(), we calculate pos_ratio based on
942 * two values: wb_dirty and wb_thresh. Let's consider an example:
943 * total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global
944 * limits are set by default to 10% and 20% (background and throttle).
945 * Then wb_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
946 * wb_calc_thresh(wb, bg_thresh) is about ~4K pages. wb_setpoint is
947 * about ~6K pages (as the average of background and throttle wb
948 * limits). The 3rd order polynomial will provide positive feedback if
949 * wb_dirty is under wb_setpoint and vice versa.
950 *
951 * Note, that we cannot use global counters in these calculations
952 * because we want to throttle process writing to a strictlimit wb
953 * much earlier than global "freerun" is reached (~23MB vs. ~2.3GB
954 * in the example above).
955 */
956 if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
957 long long wb_pos_ratio;
958
959 if (dtc->wb_dirty < 8) {
960 dtc->pos_ratio = min_t(long long, pos_ratio * 2,
961 2 << RATELIMIT_CALC_SHIFT);
962 return;
963 }
964
965 if (dtc->wb_dirty >= wb_thresh)
966 return;
967
968 wb_setpoint = dirty_freerun_ceiling(wb_thresh,
969 dtc->wb_bg_thresh);
970
971 if (wb_setpoint == 0 || wb_setpoint == wb_thresh)
972 return;
973
974 wb_pos_ratio = pos_ratio_polynom(wb_setpoint, dtc->wb_dirty,
975 wb_thresh);
976
977 /*
978 * Typically, for strictlimit case, wb_setpoint << setpoint
979 * and pos_ratio >> wb_pos_ratio. In the other words global
980 * state ("dirty") is not limiting factor and we have to
981 * make decision based on wb counters. But there is an
982 * important case when global pos_ratio should get precedence:
983 * global limits are exceeded (e.g. due to activities on other
984 * wb's) while given strictlimit wb is below limit.
985 *
986 * "pos_ratio * wb_pos_ratio" would work for the case above,
987 * but it would look too non-natural for the case of all
988 * activity in the system coming from a single strictlimit wb
989 * with bdi->max_ratio == 100%.
990 *
991 * Note that min() below somewhat changes the dynamics of the
992 * control system. Normally, pos_ratio value can be well over 3
993 * (when globally we are at freerun and wb is well below wb
994 * setpoint). Now the maximum pos_ratio in the same situation
995 * is 2. We might want to tweak this if we observe the control
996 * system is too slow to adapt.
997 */
998 dtc->pos_ratio = min(pos_ratio, wb_pos_ratio);
999 return;
1000 }
1001
1002 /*
1003 * We have computed basic pos_ratio above based on global situation. If
1004 * the wb is over/under its share of dirty pages, we want to scale
1005 * pos_ratio further down/up. That is done by the following mechanism.
1006 */
1007
1008 /*
1009 * wb setpoint
1010 *
1011 * f(wb_dirty) := 1.0 + k * (wb_dirty - wb_setpoint)
1012 *
1013 * x_intercept - wb_dirty
1014 * := --------------------------
1015 * x_intercept - wb_setpoint
1016 *
1017 * The main wb control line is a linear function that subjects to
1018 *
1019 * (1) f(wb_setpoint) = 1.0
1020 * (2) k = - 1 / (8 * write_bw) (in single wb case)
1021 * or equally: x_intercept = wb_setpoint + 8 * write_bw
1022 *
1023 * For single wb case, the dirty pages are observed to fluctuate
1024 * regularly within range
1025 * [wb_setpoint - write_bw/2, wb_setpoint + write_bw/2]
1026 * for various filesystems, where (2) can yield in a reasonable 12.5%
1027 * fluctuation range for pos_ratio.
1028 *
1029 * For JBOD case, wb_thresh (not wb_dirty!) could fluctuate up to its
1030 * own size, so move the slope over accordingly and choose a slope that
1031 * yields 100% pos_ratio fluctuation on suddenly doubled wb_thresh.
1032 */
1033 if (unlikely(wb_thresh > dtc->thresh))
1034 wb_thresh = dtc->thresh;
1035 /*
1036 * It's very possible that wb_thresh is close to 0 not because the
1037 * device is slow, but that it has remained inactive for long time.
1038 * Honour such devices a reasonable good (hopefully IO efficient)
1039 * threshold, so that the occasional writes won't be blocked and active
1040 * writes can rampup the threshold quickly.
1041 */
1042 wb_thresh = max(wb_thresh, (limit - dtc->dirty) / 8);
1043 /*
1044 * scale global setpoint to wb's:
1045 * wb_setpoint = setpoint * wb_thresh / thresh
1046 */
1047 x = div_u64((u64)wb_thresh << 16, dtc->thresh | 1);
1048 wb_setpoint = setpoint * (u64)x >> 16;
1049 /*
1050 * Use span=(8*write_bw) in single wb case as indicated by
1051 * (thresh - wb_thresh ~= 0) and transit to wb_thresh in JBOD case.
1052 *
1053 * wb_thresh thresh - wb_thresh
1054 * span = --------- * (8 * write_bw) + ------------------ * wb_thresh
1055 * thresh thresh
1056 */
1057 span = (dtc->thresh - wb_thresh + 8 * write_bw) * (u64)x >> 16;
1058 x_intercept = wb_setpoint + span;
1059
1060 if (dtc->wb_dirty < x_intercept - span / 4) {
1061 pos_ratio = div64_u64(pos_ratio * (x_intercept - dtc->wb_dirty),
1062 (x_intercept - wb_setpoint) | 1);
1063 } else
1064 pos_ratio /= 4;
1065
1066 /*
1067 * wb reserve area, safeguard against dirty pool underrun and disk idle
1068 * It may push the desired control point of global dirty pages higher
1069 * than setpoint.
1070 */
1071 x_intercept = wb_thresh / 2;
1072 if (dtc->wb_dirty < x_intercept) {
1073 if (dtc->wb_dirty > x_intercept / 8)
1074 pos_ratio = div_u64(pos_ratio * x_intercept,
1075 dtc->wb_dirty);
1076 else
1077 pos_ratio *= 8;
1078 }
1079
1080 dtc->pos_ratio = pos_ratio;
1081}
1082
1083static void wb_update_write_bandwidth(struct bdi_writeback *wb,
1084 unsigned long elapsed,
1085 unsigned long written)
1086{
1087 const unsigned long period = roundup_pow_of_two(3 * HZ);
1088 unsigned long avg = wb->avg_write_bandwidth;
1089 unsigned long old = wb->write_bandwidth;
1090 u64 bw;
1091
1092 /*
1093 * bw = written * HZ / elapsed
1094 *
1095 * bw * elapsed + write_bandwidth * (period - elapsed)
1096 * write_bandwidth = ---------------------------------------------------
1097 * period
1098 *
1099 * @written may have decreased due to account_page_redirty().
1100 * Avoid underflowing @bw calculation.
1101 */
1102 bw = written - min(written, wb->written_stamp);
1103 bw *= HZ;
1104 if (unlikely(elapsed > period)) {
1105 do_div(bw, elapsed);
1106 avg = bw;
1107 goto out;
1108 }
1109 bw += (u64)wb->write_bandwidth * (period - elapsed);
1110 bw >>= ilog2(period);
1111
1112 /*
1113 * one more level of smoothing, for filtering out sudden spikes
1114 */
1115 if (avg > old && old >= (unsigned long)bw)
1116 avg -= (avg - old) >> 3;
1117
1118 if (avg < old && old <= (unsigned long)bw)
1119 avg += (old - avg) >> 3;
1120
1121out:
1122 /* keep avg > 0 to guarantee that tot > 0 if there are dirty wbs */
1123 avg = max(avg, 1LU);
1124 if (wb_has_dirty_io(wb)) {
1125 long delta = avg - wb->avg_write_bandwidth;
1126 WARN_ON_ONCE(atomic_long_add_return(delta,
1127 &wb->bdi->tot_write_bandwidth) <= 0);
1128 }
1129 wb->write_bandwidth = bw;
1130 wb->avg_write_bandwidth = avg;
1131}
1132
1133static void update_dirty_limit(struct dirty_throttle_control *dtc)
1134{
1135 struct wb_domain *dom = dtc_dom(dtc);
1136 unsigned long thresh = dtc->thresh;
1137 unsigned long limit = dom->dirty_limit;
1138
1139 /*
1140 * Follow up in one step.
1141 */
1142 if (limit < thresh) {
1143 limit = thresh;
1144 goto update;
1145 }
1146
1147 /*
1148 * Follow down slowly. Use the higher one as the target, because thresh
1149 * may drop below dirty. This is exactly the reason to introduce
1150 * dom->dirty_limit which is guaranteed to lie above the dirty pages.
1151 */
1152 thresh = max(thresh, dtc->dirty);
1153 if (limit > thresh) {
1154 limit -= (limit - thresh) >> 5;
1155 goto update;
1156 }
1157 return;
1158update:
1159 dom->dirty_limit = limit;
1160}
1161
1162static void domain_update_bandwidth(struct dirty_throttle_control *dtc,
1163 unsigned long now)
1164{
1165 struct wb_domain *dom = dtc_dom(dtc);
1166
1167 /*
1168 * check locklessly first to optimize away locking for the most time
1169 */
1170 if (time_before(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL))
1171 return;
1172
1173 spin_lock(&dom->lock);
1174 if (time_after_eq(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL)) {
1175 update_dirty_limit(dtc);
1176 dom->dirty_limit_tstamp = now;
1177 }
1178 spin_unlock(&dom->lock);
1179}
1180
1181/*
1182 * Maintain wb->dirty_ratelimit, the base dirty throttle rate.
1183 *
1184 * Normal wb tasks will be curbed at or below it in long term.
1185 * Obviously it should be around (write_bw / N) when there are N dd tasks.
1186 */
1187static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc,
1188 unsigned long dirtied,
1189 unsigned long elapsed)
1190{
1191 struct bdi_writeback *wb = dtc->wb;
1192 unsigned long dirty = dtc->dirty;
1193 unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
1194 unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
1195 unsigned long setpoint = (freerun + limit) / 2;
1196 unsigned long write_bw = wb->avg_write_bandwidth;
1197 unsigned long dirty_ratelimit = wb->dirty_ratelimit;
1198 unsigned long dirty_rate;
1199 unsigned long task_ratelimit;
1200 unsigned long balanced_dirty_ratelimit;
1201 unsigned long step;
1202 unsigned long x;
1203 unsigned long shift;
1204
1205 /*
1206 * The dirty rate will match the writeout rate in long term, except
1207 * when dirty pages are truncated by userspace or re-dirtied by FS.
1208 */
1209 dirty_rate = (dirtied - wb->dirtied_stamp) * HZ / elapsed;
1210
1211 /*
1212 * task_ratelimit reflects each dd's dirty rate for the past 200ms.
1213 */
1214 task_ratelimit = (u64)dirty_ratelimit *
1215 dtc->pos_ratio >> RATELIMIT_CALC_SHIFT;
1216 task_ratelimit++; /* it helps rampup dirty_ratelimit from tiny values */
1217
1218 /*
1219 * A linear estimation of the "balanced" throttle rate. The theory is,
1220 * if there are N dd tasks, each throttled at task_ratelimit, the wb's
1221 * dirty_rate will be measured to be (N * task_ratelimit). So the below
1222 * formula will yield the balanced rate limit (write_bw / N).
1223 *
1224 * Note that the expanded form is not a pure rate feedback:
1225 * rate_(i+1) = rate_(i) * (write_bw / dirty_rate) (1)
1226 * but also takes pos_ratio into account:
1227 * rate_(i+1) = rate_(i) * (write_bw / dirty_rate) * pos_ratio (2)
1228 *
1229 * (1) is not realistic because pos_ratio also takes part in balancing
1230 * the dirty rate. Consider the state
1231 * pos_ratio = 0.5 (3)
1232 * rate = 2 * (write_bw / N) (4)
1233 * If (1) is used, it will stuck in that state! Because each dd will
1234 * be throttled at
1235 * task_ratelimit = pos_ratio * rate = (write_bw / N) (5)
1236 * yielding
1237 * dirty_rate = N * task_ratelimit = write_bw (6)
1238 * put (6) into (1) we get
1239 * rate_(i+1) = rate_(i) (7)
1240 *
1241 * So we end up using (2) to always keep
1242 * rate_(i+1) ~= (write_bw / N) (8)
1243 * regardless of the value of pos_ratio. As long as (8) is satisfied,
1244 * pos_ratio is able to drive itself to 1.0, which is not only where
1245 * the dirty count meet the setpoint, but also where the slope of
1246 * pos_ratio is most flat and hence task_ratelimit is least fluctuated.
1247 */
1248 balanced_dirty_ratelimit = div_u64((u64)task_ratelimit * write_bw,
1249 dirty_rate | 1);
1250 /*
1251 * balanced_dirty_ratelimit ~= (write_bw / N) <= write_bw
1252 */
1253 if (unlikely(balanced_dirty_ratelimit > write_bw))
1254 balanced_dirty_ratelimit = write_bw;
1255
1256 /*
1257 * We could safely do this and return immediately:
1258 *
1259 * wb->dirty_ratelimit = balanced_dirty_ratelimit;
1260 *
1261 * However to get a more stable dirty_ratelimit, the below elaborated
1262 * code makes use of task_ratelimit to filter out singular points and
1263 * limit the step size.
1264 *
1265 * The below code essentially only uses the relative value of
1266 *
1267 * task_ratelimit - dirty_ratelimit
1268 * = (pos_ratio - 1) * dirty_ratelimit
1269 *
1270 * which reflects the direction and size of dirty position error.
1271 */
1272
1273 /*
1274 * dirty_ratelimit will follow balanced_dirty_ratelimit iff
1275 * task_ratelimit is on the same side of dirty_ratelimit, too.
1276 * For example, when
1277 * - dirty_ratelimit > balanced_dirty_ratelimit
1278 * - dirty_ratelimit > task_ratelimit (dirty pages are above setpoint)
1279 * lowering dirty_ratelimit will help meet both the position and rate
1280 * control targets. Otherwise, don't update dirty_ratelimit if it will
1281 * only help meet the rate target. After all, what the users ultimately
1282 * feel and care are stable dirty rate and small position error.
1283 *
1284 * |task_ratelimit - dirty_ratelimit| is used to limit the step size
1285 * and filter out the singular points of balanced_dirty_ratelimit. Which
1286 * keeps jumping around randomly and can even leap far away at times
1287 * due to the small 200ms estimation period of dirty_rate (we want to
1288 * keep that period small to reduce time lags).
1289 */
1290 step = 0;
1291
1292 /*
1293 * For strictlimit case, calculations above were based on wb counters
1294 * and limits (starting from pos_ratio = wb_position_ratio() and up to
1295 * balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate).
1296 * Hence, to calculate "step" properly, we have to use wb_dirty as
1297 * "dirty" and wb_setpoint as "setpoint".
1298 *
1299 * We rampup dirty_ratelimit forcibly if wb_dirty is low because
1300 * it's possible that wb_thresh is close to zero due to inactivity
1301 * of backing device.
1302 */
1303 if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
1304 dirty = dtc->wb_dirty;
1305 if (dtc->wb_dirty < 8)
1306 setpoint = dtc->wb_dirty + 1;
1307 else
1308 setpoint = (dtc->wb_thresh + dtc->wb_bg_thresh) / 2;
1309 }
1310
1311 if (dirty < setpoint) {
1312 x = min3(wb->balanced_dirty_ratelimit,
1313 balanced_dirty_ratelimit, task_ratelimit);
1314 if (dirty_ratelimit < x)
1315 step = x - dirty_ratelimit;
1316 } else {
1317 x = max3(wb->balanced_dirty_ratelimit,
1318 balanced_dirty_ratelimit, task_ratelimit);
1319 if (dirty_ratelimit > x)
1320 step = dirty_ratelimit - x;
1321 }
1322
1323 /*
1324 * Don't pursue 100% rate matching. It's impossible since the balanced
1325 * rate itself is constantly fluctuating. So decrease the track speed
1326 * when it gets close to the target. Helps eliminate pointless tremors.
1327 */
1328 shift = dirty_ratelimit / (2 * step + 1);
1329 if (shift < BITS_PER_LONG)
1330 step = DIV_ROUND_UP(step >> shift, 8);
1331 else
1332 step = 0;
1333
1334 if (dirty_ratelimit < balanced_dirty_ratelimit)
1335 dirty_ratelimit += step;
1336 else
1337 dirty_ratelimit -= step;
1338
1339 wb->dirty_ratelimit = max(dirty_ratelimit, 1UL);
1340 wb->balanced_dirty_ratelimit = balanced_dirty_ratelimit;
1341
1342 trace_bdi_dirty_ratelimit(wb, dirty_rate, task_ratelimit);
1343}
1344
1345static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc,
1346 struct dirty_throttle_control *mdtc,
1347 unsigned long start_time,
1348 bool update_ratelimit)
1349{
1350 struct bdi_writeback *wb = gdtc->wb;
1351 unsigned long now = jiffies;
1352 unsigned long elapsed = now - wb->bw_time_stamp;
1353 unsigned long dirtied;
1354 unsigned long written;
1355
1356 lockdep_assert_held(&wb->list_lock);
1357
1358 /*
1359 * rate-limit, only update once every 200ms.
1360 */
1361 if (elapsed < BANDWIDTH_INTERVAL)
1362 return;
1363
1364 dirtied = percpu_counter_read(&wb->stat[WB_DIRTIED]);
1365 written = percpu_counter_read(&wb->stat[WB_WRITTEN]);
1366
1367 /*
1368 * Skip quiet periods when disk bandwidth is under-utilized.
1369 * (at least 1s idle time between two flusher runs)
1370 */
1371 if (elapsed > HZ && time_before(wb->bw_time_stamp, start_time))
1372 goto snapshot;
1373
1374 if (update_ratelimit) {
1375 domain_update_bandwidth(gdtc, now);
1376 wb_update_dirty_ratelimit(gdtc, dirtied, elapsed);
1377
1378 /*
1379 * @mdtc is always NULL if !CGROUP_WRITEBACK but the
1380 * compiler has no way to figure that out. Help it.
1381 */
1382 if (IS_ENABLED(CONFIG_CGROUP_WRITEBACK) && mdtc) {
1383 domain_update_bandwidth(mdtc, now);
1384 wb_update_dirty_ratelimit(mdtc, dirtied, elapsed);
1385 }
1386 }
1387 wb_update_write_bandwidth(wb, elapsed, written);
1388
1389snapshot:
1390 wb->dirtied_stamp = dirtied;
1391 wb->written_stamp = written;
1392 wb->bw_time_stamp = now;
1393}
1394
1395void wb_update_bandwidth(struct bdi_writeback *wb, unsigned long start_time)
1396{
1397 struct dirty_throttle_control gdtc = { GDTC_INIT(wb) };
1398
1399 __wb_update_bandwidth(&gdtc, NULL, start_time, false);
1400}
1401
1402/*
1403 * After a task dirtied this many pages, balance_dirty_pages_ratelimited()
1404 * will look to see if it needs to start dirty throttling.
1405 *
1406 * If dirty_poll_interval is too low, big NUMA machines will call the expensive
1407 * global_zone_page_state() too often. So scale it near-sqrt to the safety margin
1408 * (the number of pages we may dirty without exceeding the dirty limits).
1409 */
1410static unsigned long dirty_poll_interval(unsigned long dirty,
1411 unsigned long thresh)
1412{
1413 if (thresh > dirty)
1414 return 1UL << (ilog2(thresh - dirty) >> 1);
1415
1416 return 1;
1417}
1418
1419static unsigned long wb_max_pause(struct bdi_writeback *wb,
1420 unsigned long wb_dirty)
1421{
1422 unsigned long bw = wb->avg_write_bandwidth;
1423 unsigned long t;
1424
1425 /*
1426 * Limit pause time for small memory systems. If sleeping for too long
1427 * time, a small pool of dirty/writeback pages may go empty and disk go
1428 * idle.
1429 *
1430 * 8 serves as the safety ratio.
1431 */
1432 t = wb_dirty / (1 + bw / roundup_pow_of_two(1 + HZ / 8));
1433 t++;
1434
1435 return min_t(unsigned long, t, MAX_PAUSE);
1436}
1437
1438static long wb_min_pause(struct bdi_writeback *wb,
1439 long max_pause,
1440 unsigned long task_ratelimit,
1441 unsigned long dirty_ratelimit,
1442 int *nr_dirtied_pause)
1443{
1444 long hi = ilog2(wb->avg_write_bandwidth);
1445 long lo = ilog2(wb->dirty_ratelimit);
1446 long t; /* target pause */
1447 long pause; /* estimated next pause */
1448 int pages; /* target nr_dirtied_pause */
1449
1450 /* target for 10ms pause on 1-dd case */
1451 t = max(1, HZ / 100);
1452
1453 /*
1454 * Scale up pause time for concurrent dirtiers in order to reduce CPU
1455 * overheads.
1456 *
1457 * (N * 10ms) on 2^N concurrent tasks.
1458 */
1459 if (hi > lo)
1460 t += (hi - lo) * (10 * HZ) / 1024;
1461
1462 /*
1463 * This is a bit convoluted. We try to base the next nr_dirtied_pause
1464 * on the much more stable dirty_ratelimit. However the next pause time
1465 * will be computed based on task_ratelimit and the two rate limits may
1466 * depart considerably at some time. Especially if task_ratelimit goes
1467 * below dirty_ratelimit/2 and the target pause is max_pause, the next
1468 * pause time will be max_pause*2 _trimmed down_ to max_pause. As a
1469 * result task_ratelimit won't be executed faithfully, which could
1470 * eventually bring down dirty_ratelimit.
1471 *
1472 * We apply two rules to fix it up:
1473 * 1) try to estimate the next pause time and if necessary, use a lower
1474 * nr_dirtied_pause so as not to exceed max_pause. When this happens,
1475 * nr_dirtied_pause will be "dancing" with task_ratelimit.
1476 * 2) limit the target pause time to max_pause/2, so that the normal
1477 * small fluctuations of task_ratelimit won't trigger rule (1) and
1478 * nr_dirtied_pause will remain as stable as dirty_ratelimit.
1479 */
1480 t = min(t, 1 + max_pause / 2);
1481 pages = dirty_ratelimit * t / roundup_pow_of_two(HZ);
1482
1483 /*
1484 * Tiny nr_dirtied_pause is found to hurt I/O performance in the test
1485 * case fio-mmap-randwrite-64k, which does 16*{sync read, async write}.
1486 * When the 16 consecutive reads are often interrupted by some dirty
1487 * throttling pause during the async writes, cfq will go into idles
1488 * (deadline is fine). So push nr_dirtied_pause as high as possible
1489 * until reaches DIRTY_POLL_THRESH=32 pages.
1490 */
1491 if (pages < DIRTY_POLL_THRESH) {
1492 t = max_pause;
1493 pages = dirty_ratelimit * t / roundup_pow_of_two(HZ);
1494 if (pages > DIRTY_POLL_THRESH) {
1495 pages = DIRTY_POLL_THRESH;
1496 t = HZ * DIRTY_POLL_THRESH / dirty_ratelimit;
1497 }
1498 }
1499
1500 pause = HZ * pages / (task_ratelimit + 1);
1501 if (pause > max_pause) {
1502 t = max_pause;
1503 pages = task_ratelimit * t / roundup_pow_of_two(HZ);
1504 }
1505
1506 *nr_dirtied_pause = pages;
1507 /*
1508 * The minimal pause time will normally be half the target pause time.
1509 */
1510 return pages >= DIRTY_POLL_THRESH ? 1 + t / 2 : t;
1511}
1512
1513static inline void wb_dirty_limits(struct dirty_throttle_control *dtc)
1514{
1515 struct bdi_writeback *wb = dtc->wb;
1516 unsigned long wb_reclaimable;
1517
1518 /*
1519 * wb_thresh is not treated as some limiting factor as
1520 * dirty_thresh, due to reasons
1521 * - in JBOD setup, wb_thresh can fluctuate a lot
1522 * - in a system with HDD and USB key, the USB key may somehow
1523 * go into state (wb_dirty >> wb_thresh) either because
1524 * wb_dirty starts high, or because wb_thresh drops low.
1525 * In this case we don't want to hard throttle the USB key
1526 * dirtiers for 100 seconds until wb_dirty drops under
1527 * wb_thresh. Instead the auxiliary wb control line in
1528 * wb_position_ratio() will let the dirtier task progress
1529 * at some rate <= (write_bw / 2) for bringing down wb_dirty.
1530 */
1531 dtc->wb_thresh = __wb_calc_thresh(dtc);
1532 dtc->wb_bg_thresh = dtc->thresh ?
1533 div_u64((u64)dtc->wb_thresh * dtc->bg_thresh, dtc->thresh) : 0;
1534
1535 /*
1536 * In order to avoid the stacked BDI deadlock we need
1537 * to ensure we accurately count the 'dirty' pages when
1538 * the threshold is low.
1539 *
1540 * Otherwise it would be possible to get thresh+n pages
1541 * reported dirty, even though there are thresh-m pages
1542 * actually dirty; with m+n sitting in the percpu
1543 * deltas.
1544 */
1545 if (dtc->wb_thresh < 2 * wb_stat_error()) {
1546 wb_reclaimable = wb_stat_sum(wb, WB_RECLAIMABLE);
1547 dtc->wb_dirty = wb_reclaimable + wb_stat_sum(wb, WB_WRITEBACK);
1548 } else {
1549 wb_reclaimable = wb_stat(wb, WB_RECLAIMABLE);
1550 dtc->wb_dirty = wb_reclaimable + wb_stat(wb, WB_WRITEBACK);
1551 }
1552}
1553
1554/*
1555 * balance_dirty_pages() must be called by processes which are generating dirty
1556 * data. It looks at the number of dirty pages in the machine and will force
1557 * the caller to wait once crossing the (background_thresh + dirty_thresh) / 2.
1558 * If we're over `background_thresh' then the writeback threads are woken to
1559 * perform some writeout.
1560 */
1561static void balance_dirty_pages(struct bdi_writeback *wb,
1562 unsigned long pages_dirtied)
1563{
1564 struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) };
1565 struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) };
1566 struct dirty_throttle_control * const gdtc = &gdtc_stor;
1567 struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ?
1568 &mdtc_stor : NULL;
1569 struct dirty_throttle_control *sdtc;
1570 unsigned long nr_reclaimable; /* = file_dirty + unstable_nfs */
1571 long period;
1572 long pause;
1573 long max_pause;
1574 long min_pause;
1575 int nr_dirtied_pause;
1576 bool dirty_exceeded = false;
1577 unsigned long task_ratelimit;
1578 unsigned long dirty_ratelimit;
1579 struct backing_dev_info *bdi = wb->bdi;
1580 bool strictlimit = bdi->capabilities & BDI_CAP_STRICTLIMIT;
1581 unsigned long start_time = jiffies;
1582
1583 for (;;) {
1584 unsigned long now = jiffies;
1585 unsigned long dirty, thresh, bg_thresh;
1586 unsigned long m_dirty = 0; /* stop bogus uninit warnings */
1587 unsigned long m_thresh = 0;
1588 unsigned long m_bg_thresh = 0;
1589
1590 /*
1591 * Unstable writes are a feature of certain networked
1592 * filesystems (i.e. NFS) in which data may have been
1593 * written to the server's write cache, but has not yet
1594 * been flushed to permanent storage.
1595 */
1596 nr_reclaimable = global_node_page_state(NR_FILE_DIRTY) +
1597 global_node_page_state(NR_UNSTABLE_NFS);
1598 gdtc->avail = global_dirtyable_memory();
1599 gdtc->dirty = nr_reclaimable + global_node_page_state(NR_WRITEBACK);
1600
1601 domain_dirty_limits(gdtc);
1602
1603 if (unlikely(strictlimit)) {
1604 wb_dirty_limits(gdtc);
1605
1606 dirty = gdtc->wb_dirty;
1607 thresh = gdtc->wb_thresh;
1608 bg_thresh = gdtc->wb_bg_thresh;
1609 } else {
1610 dirty = gdtc->dirty;
1611 thresh = gdtc->thresh;
1612 bg_thresh = gdtc->bg_thresh;
1613 }
1614
1615 if (mdtc) {
1616 unsigned long filepages, headroom, writeback;
1617
1618 /*
1619 * If @wb belongs to !root memcg, repeat the same
1620 * basic calculations for the memcg domain.
1621 */
1622 mem_cgroup_wb_stats(wb, &filepages, &headroom,
1623 &mdtc->dirty, &writeback);
1624 mdtc->dirty += writeback;
1625 mdtc_calc_avail(mdtc, filepages, headroom);
1626
1627 domain_dirty_limits(mdtc);
1628
1629 if (unlikely(strictlimit)) {
1630 wb_dirty_limits(mdtc);
1631 m_dirty = mdtc->wb_dirty;
1632 m_thresh = mdtc->wb_thresh;
1633 m_bg_thresh = mdtc->wb_bg_thresh;
1634 } else {
1635 m_dirty = mdtc->dirty;
1636 m_thresh = mdtc->thresh;
1637 m_bg_thresh = mdtc->bg_thresh;
1638 }
1639 }
1640
1641 /*
1642 * Throttle it only when the background writeback cannot
1643 * catch-up. This avoids (excessively) small writeouts
1644 * when the wb limits are ramping up in case of !strictlimit.
1645 *
1646 * In strictlimit case make decision based on the wb counters
1647 * and limits. Small writeouts when the wb limits are ramping
1648 * up are the price we consciously pay for strictlimit-ing.
1649 *
1650 * If memcg domain is in effect, @dirty should be under
1651 * both global and memcg freerun ceilings.
1652 */
1653 if (dirty <= dirty_freerun_ceiling(thresh, bg_thresh) &&
1654 (!mdtc ||
1655 m_dirty <= dirty_freerun_ceiling(m_thresh, m_bg_thresh))) {
1656 unsigned long intv = dirty_poll_interval(dirty, thresh);
1657 unsigned long m_intv = ULONG_MAX;
1658
1659 current->dirty_paused_when = now;
1660 current->nr_dirtied = 0;
1661 if (mdtc)
1662 m_intv = dirty_poll_interval(m_dirty, m_thresh);
1663 current->nr_dirtied_pause = min(intv, m_intv);
1664 break;
1665 }
1666
1667 if (unlikely(!writeback_in_progress(wb)))
1668 wb_start_background_writeback(wb);
1669
1670 /*
1671 * Calculate global domain's pos_ratio and select the
1672 * global dtc by default.
1673 */
1674 if (!strictlimit)
1675 wb_dirty_limits(gdtc);
1676
1677 dirty_exceeded = (gdtc->wb_dirty > gdtc->wb_thresh) &&
1678 ((gdtc->dirty > gdtc->thresh) || strictlimit);
1679
1680 wb_position_ratio(gdtc);
1681 sdtc = gdtc;
1682
1683 if (mdtc) {
1684 /*
1685 * If memcg domain is in effect, calculate its
1686 * pos_ratio. @wb should satisfy constraints from
1687 * both global and memcg domains. Choose the one
1688 * w/ lower pos_ratio.
1689 */
1690 if (!strictlimit)
1691 wb_dirty_limits(mdtc);
1692
1693 dirty_exceeded |= (mdtc->wb_dirty > mdtc->wb_thresh) &&
1694 ((mdtc->dirty > mdtc->thresh) || strictlimit);
1695
1696 wb_position_ratio(mdtc);
1697 if (mdtc->pos_ratio < gdtc->pos_ratio)
1698 sdtc = mdtc;
1699 }
1700
1701 if (dirty_exceeded && !wb->dirty_exceeded)
1702 wb->dirty_exceeded = 1;
1703
1704 if (time_is_before_jiffies(wb->bw_time_stamp +
1705 BANDWIDTH_INTERVAL)) {
1706 spin_lock(&wb->list_lock);
1707 __wb_update_bandwidth(gdtc, mdtc, start_time, true);
1708 spin_unlock(&wb->list_lock);
1709 }
1710
1711 /* throttle according to the chosen dtc */
1712 dirty_ratelimit = wb->dirty_ratelimit;
1713 task_ratelimit = ((u64)dirty_ratelimit * sdtc->pos_ratio) >>
1714 RATELIMIT_CALC_SHIFT;
1715 max_pause = wb_max_pause(wb, sdtc->wb_dirty);
1716 min_pause = wb_min_pause(wb, max_pause,
1717 task_ratelimit, dirty_ratelimit,
1718 &nr_dirtied_pause);
1719
1720 if (unlikely(task_ratelimit == 0)) {
1721 period = max_pause;
1722 pause = max_pause;
1723 goto pause;
1724 }
1725 period = HZ * pages_dirtied / task_ratelimit;
1726 pause = period;
1727 if (current->dirty_paused_when)
1728 pause -= now - current->dirty_paused_when;
1729 /*
1730 * For less than 1s think time (ext3/4 may block the dirtier
1731 * for up to 800ms from time to time on 1-HDD; so does xfs,
1732 * however at much less frequency), try to compensate it in
1733 * future periods by updating the virtual time; otherwise just
1734 * do a reset, as it may be a light dirtier.
1735 */
1736 if (pause < min_pause) {
1737 trace_balance_dirty_pages(wb,
1738 sdtc->thresh,
1739 sdtc->bg_thresh,
1740 sdtc->dirty,
1741 sdtc->wb_thresh,
1742 sdtc->wb_dirty,
1743 dirty_ratelimit,
1744 task_ratelimit,
1745 pages_dirtied,
1746 period,
1747 min(pause, 0L),
1748 start_time);
1749 if (pause < -HZ) {
1750 current->dirty_paused_when = now;
1751 current->nr_dirtied = 0;
1752 } else if (period) {
1753 current->dirty_paused_when += period;
1754 current->nr_dirtied = 0;
1755 } else if (current->nr_dirtied_pause <= pages_dirtied)
1756 current->nr_dirtied_pause += pages_dirtied;
1757 break;
1758 }
1759 if (unlikely(pause > max_pause)) {
1760 /* for occasional dropped task_ratelimit */
1761 now += min(pause - max_pause, max_pause);
1762 pause = max_pause;
1763 }
1764
1765pause:
1766 trace_balance_dirty_pages(wb,
1767 sdtc->thresh,
1768 sdtc->bg_thresh,
1769 sdtc->dirty,
1770 sdtc->wb_thresh,
1771 sdtc->wb_dirty,
1772 dirty_ratelimit,
1773 task_ratelimit,
1774 pages_dirtied,
1775 period,
1776 pause,
1777 start_time);
1778 __set_current_state(TASK_KILLABLE);
1779 wb->dirty_sleep = now;
1780 io_schedule_timeout(pause);
1781
1782 current->dirty_paused_when = now + pause;
1783 current->nr_dirtied = 0;
1784 current->nr_dirtied_pause = nr_dirtied_pause;
1785
1786 /*
1787 * This is typically equal to (dirty < thresh) and can also
1788 * keep "1000+ dd on a slow USB stick" under control.
1789 */
1790 if (task_ratelimit)
1791 break;
1792
1793 /*
1794 * In the case of an unresponding NFS server and the NFS dirty
1795 * pages exceeds dirty_thresh, give the other good wb's a pipe
1796 * to go through, so that tasks on them still remain responsive.
1797 *
1798 * In theory 1 page is enough to keep the consumer-producer
1799 * pipe going: the flusher cleans 1 page => the task dirties 1
1800 * more page. However wb_dirty has accounting errors. So use
1801 * the larger and more IO friendly wb_stat_error.
1802 */
1803 if (sdtc->wb_dirty <= wb_stat_error())
1804 break;
1805
1806 if (fatal_signal_pending(current))
1807 break;
1808 }
1809
1810 if (!dirty_exceeded && wb->dirty_exceeded)
1811 wb->dirty_exceeded = 0;
1812
1813 if (writeback_in_progress(wb))
1814 return;
1815
1816 /*
1817 * In laptop mode, we wait until hitting the higher threshold before
1818 * starting background writeout, and then write out all the way down
1819 * to the lower threshold. So slow writers cause minimal disk activity.
1820 *
1821 * In normal mode, we start background writeout at the lower
1822 * background_thresh, to keep the amount of dirty memory low.
1823 */
1824 if (laptop_mode)
1825 return;
1826
1827 if (nr_reclaimable > gdtc->bg_thresh)
1828 wb_start_background_writeback(wb);
1829}
1830
1831static DEFINE_PER_CPU(int, bdp_ratelimits);
1832
1833/*
1834 * Normal tasks are throttled by
1835 * loop {
1836 * dirty tsk->nr_dirtied_pause pages;
1837 * take a snap in balance_dirty_pages();
1838 * }
1839 * However there is a worst case. If every task exit immediately when dirtied
1840 * (tsk->nr_dirtied_pause - 1) pages, balance_dirty_pages() will never be
1841 * called to throttle the page dirties. The solution is to save the not yet
1842 * throttled page dirties in dirty_throttle_leaks on task exit and charge them
1843 * randomly into the running tasks. This works well for the above worst case,
1844 * as the new task will pick up and accumulate the old task's leaked dirty
1845 * count and eventually get throttled.
1846 */
1847DEFINE_PER_CPU(int, dirty_throttle_leaks) = 0;
1848
1849/**
1850 * balance_dirty_pages_ratelimited - balance dirty memory state
1851 * @mapping: address_space which was dirtied
1852 *
1853 * Processes which are dirtying memory should call in here once for each page
1854 * which was newly dirtied. The function will periodically check the system's
1855 * dirty state and will initiate writeback if needed.
1856 *
1857 * On really big machines, get_writeback_state is expensive, so try to avoid
1858 * calling it too often (ratelimiting). But once we're over the dirty memory
1859 * limit we decrease the ratelimiting by a lot, to prevent individual processes
1860 * from overshooting the limit by (ratelimit_pages) each.
1861 */
1862void balance_dirty_pages_ratelimited(struct address_space *mapping)
1863{
1864 struct inode *inode = mapping->host;
1865 struct backing_dev_info *bdi = inode_to_bdi(inode);
1866 struct bdi_writeback *wb = NULL;
1867 int ratelimit;
1868 int *p;
1869
1870 if (!bdi_cap_account_dirty(bdi))
1871 return;
1872
1873 if (inode_cgwb_enabled(inode))
1874 wb = wb_get_create_current(bdi, GFP_KERNEL);
1875 if (!wb)
1876 wb = &bdi->wb;
1877
1878 ratelimit = current->nr_dirtied_pause;
1879 if (wb->dirty_exceeded)
1880 ratelimit = min(ratelimit, 32 >> (PAGE_SHIFT - 10));
1881
1882 preempt_disable();
1883 /*
1884 * This prevents one CPU to accumulate too many dirtied pages without
1885 * calling into balance_dirty_pages(), which can happen when there are
1886 * 1000+ tasks, all of them start dirtying pages at exactly the same
1887 * time, hence all honoured too large initial task->nr_dirtied_pause.
1888 */
1889 p = this_cpu_ptr(&bdp_ratelimits);
1890 if (unlikely(current->nr_dirtied >= ratelimit))
1891 *p = 0;
1892 else if (unlikely(*p >= ratelimit_pages)) {
1893 *p = 0;
1894 ratelimit = 0;
1895 }
1896 /*
1897 * Pick up the dirtied pages by the exited tasks. This avoids lots of
1898 * short-lived tasks (eg. gcc invocations in a kernel build) escaping
1899 * the dirty throttling and livelock other long-run dirtiers.
1900 */
1901 p = this_cpu_ptr(&dirty_throttle_leaks);
1902 if (*p > 0 && current->nr_dirtied < ratelimit) {
1903 unsigned long nr_pages_dirtied;
1904 nr_pages_dirtied = min(*p, ratelimit - current->nr_dirtied);
1905 *p -= nr_pages_dirtied;
1906 current->nr_dirtied += nr_pages_dirtied;
1907 }
1908 preempt_enable();
1909
1910 if (unlikely(current->nr_dirtied >= ratelimit))
1911 balance_dirty_pages(wb, current->nr_dirtied);
1912
1913 wb_put(wb);
1914}
1915EXPORT_SYMBOL(balance_dirty_pages_ratelimited);
1916
1917/**
1918 * wb_over_bg_thresh - does @wb need to be written back?
1919 * @wb: bdi_writeback of interest
1920 *
1921 * Determines whether background writeback should keep writing @wb or it's
1922 * clean enough. Returns %true if writeback should continue.
1923 */
1924bool wb_over_bg_thresh(struct bdi_writeback *wb)
1925{
1926 struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) };
1927 struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) };
1928 struct dirty_throttle_control * const gdtc = &gdtc_stor;
1929 struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ?
1930 &mdtc_stor : NULL;
1931
1932 /*
1933 * Similar to balance_dirty_pages() but ignores pages being written
1934 * as we're trying to decide whether to put more under writeback.
1935 */
1936 gdtc->avail = global_dirtyable_memory();
1937 gdtc->dirty = global_node_page_state(NR_FILE_DIRTY) +
1938 global_node_page_state(NR_UNSTABLE_NFS);
1939 domain_dirty_limits(gdtc);
1940
1941 if (gdtc->dirty > gdtc->bg_thresh)
1942 return true;
1943
1944 if (wb_stat(wb, WB_RECLAIMABLE) >
1945 wb_calc_thresh(gdtc->wb, gdtc->bg_thresh))
1946 return true;
1947
1948 if (mdtc) {
1949 unsigned long filepages, headroom, writeback;
1950
1951 mem_cgroup_wb_stats(wb, &filepages, &headroom, &mdtc->dirty,
1952 &writeback);
1953 mdtc_calc_avail(mdtc, filepages, headroom);
1954 domain_dirty_limits(mdtc); /* ditto, ignore writeback */
1955
1956 if (mdtc->dirty > mdtc->bg_thresh)
1957 return true;
1958
1959 if (wb_stat(wb, WB_RECLAIMABLE) >
1960 wb_calc_thresh(mdtc->wb, mdtc->bg_thresh))
1961 return true;
1962 }
1963
1964 return false;
1965}
1966
1967/*
1968 * sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
1969 */
1970int dirty_writeback_centisecs_handler(struct ctl_table *table, int write,
1971 void __user *buffer, size_t *length, loff_t *ppos)
1972{
1973 unsigned int old_interval = dirty_writeback_interval;
1974 int ret;
1975
1976 ret = proc_dointvec(table, write, buffer, length, ppos);
1977
1978 /*
1979 * Writing 0 to dirty_writeback_interval will disable periodic writeback
1980 * and a different non-zero value will wakeup the writeback threads.
1981 * wb_wakeup_delayed() would be more appropriate, but it's a pain to
1982 * iterate over all bdis and wbs.
1983 * The reason we do this is to make the change take effect immediately.
1984 */
1985 if (!ret && write && dirty_writeback_interval &&
1986 dirty_writeback_interval != old_interval)
1987 wakeup_flusher_threads(WB_REASON_PERIODIC);
1988
1989 return ret;
1990}
1991
1992#ifdef CONFIG_BLOCK
1993void laptop_mode_timer_fn(struct timer_list *t)
1994{
1995 struct backing_dev_info *backing_dev_info =
1996 from_timer(backing_dev_info, t, laptop_mode_wb_timer);
1997
1998 wakeup_flusher_threads_bdi(backing_dev_info, WB_REASON_LAPTOP_TIMER);
1999}
2000
2001/*
2002 * We've spun up the disk and we're in laptop mode: schedule writeback
2003 * of all dirty data a few seconds from now. If the flush is already scheduled
2004 * then push it back - the user is still using the disk.
2005 */
2006void laptop_io_completion(struct backing_dev_info *info)
2007{
2008 mod_timer(&info->laptop_mode_wb_timer, jiffies + laptop_mode);
2009}
2010
2011/*
2012 * We're in laptop mode and we've just synced. The sync's writes will have
2013 * caused another writeback to be scheduled by laptop_io_completion.
2014 * Nothing needs to be written back anymore, so we unschedule the writeback.
2015 */
2016void laptop_sync_completion(void)
2017{
2018 struct backing_dev_info *bdi;
2019
2020 rcu_read_lock();
2021
2022 list_for_each_entry_rcu(bdi, &bdi_list, bdi_list)
2023 del_timer(&bdi->laptop_mode_wb_timer);
2024
2025 rcu_read_unlock();
2026}
2027#endif
2028
2029/*
2030 * If ratelimit_pages is too high then we can get into dirty-data overload
2031 * if a large number of processes all perform writes at the same time.
2032 * If it is too low then SMP machines will call the (expensive)
2033 * get_writeback_state too often.
2034 *
2035 * Here we set ratelimit_pages to a level which ensures that when all CPUs are
2036 * dirtying in parallel, we cannot go more than 3% (1/32) over the dirty memory
2037 * thresholds.
2038 */
2039
2040void writeback_set_ratelimit(void)
2041{
2042 struct wb_domain *dom = &global_wb_domain;
2043 unsigned long background_thresh;
2044 unsigned long dirty_thresh;
2045
2046 global_dirty_limits(&background_thresh, &dirty_thresh);
2047 dom->dirty_limit = dirty_thresh;
2048 ratelimit_pages = dirty_thresh / (num_online_cpus() * 32);
2049 if (ratelimit_pages < 16)
2050 ratelimit_pages = 16;
2051}
2052
2053static int page_writeback_cpu_online(unsigned int cpu)
2054{
2055 writeback_set_ratelimit();
2056 return 0;
2057}
2058
2059/*
2060 * Called early on to tune the page writeback dirty limits.
2061 *
2062 * We used to scale dirty pages according to how total memory
2063 * related to pages that could be allocated for buffers (by
2064 * comparing nr_free_buffer_pages() to vm_total_pages.
2065 *
2066 * However, that was when we used "dirty_ratio" to scale with
2067 * all memory, and we don't do that any more. "dirty_ratio"
2068 * is now applied to total non-HIGHPAGE memory (by subtracting
2069 * totalhigh_pages from vm_total_pages), and as such we can't
2070 * get into the old insane situation any more where we had
2071 * large amounts of dirty pages compared to a small amount of
2072 * non-HIGHMEM memory.
2073 *
2074 * But we might still want to scale the dirty_ratio by how
2075 * much memory the box has..
2076 */
2077void __init page_writeback_init(void)
2078{
2079 BUG_ON(wb_domain_init(&global_wb_domain, GFP_KERNEL));
2080
2081 cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "mm/writeback:online",
2082 page_writeback_cpu_online, NULL);
2083 cpuhp_setup_state(CPUHP_MM_WRITEBACK_DEAD, "mm/writeback:dead", NULL,
2084 page_writeback_cpu_online);
2085}
2086
2087/**
2088 * tag_pages_for_writeback - tag pages to be written by write_cache_pages
2089 * @mapping: address space structure to write
2090 * @start: starting page index
2091 * @end: ending page index (inclusive)
2092 *
2093 * This function scans the page range from @start to @end (inclusive) and tags
2094 * all pages that have DIRTY tag set with a special TOWRITE tag. The idea is
2095 * that write_cache_pages (or whoever calls this function) will then use
2096 * TOWRITE tag to identify pages eligible for writeback. This mechanism is
2097 * used to avoid livelocking of writeback by a process steadily creating new
2098 * dirty pages in the file (thus it is important for this function to be quick
2099 * so that it can tag pages faster than a dirtying process can create them).
2100 */
2101/*
2102 * We tag pages in batches of WRITEBACK_TAG_BATCH to reduce the i_pages lock
2103 * latency.
2104 */
2105void tag_pages_for_writeback(struct address_space *mapping,
2106 pgoff_t start, pgoff_t end)
2107{
2108#define WRITEBACK_TAG_BATCH 4096
2109 unsigned long tagged = 0;
2110 struct radix_tree_iter iter;
2111 void **slot;
2112
2113 xa_lock_irq(&mapping->i_pages);
2114 radix_tree_for_each_tagged(slot, &mapping->i_pages, &iter, start,
2115 PAGECACHE_TAG_DIRTY) {
2116 if (iter.index > end)
2117 break;
2118 radix_tree_iter_tag_set(&mapping->i_pages, &iter,
2119 PAGECACHE_TAG_TOWRITE);
2120 tagged++;
2121 if ((tagged % WRITEBACK_TAG_BATCH) != 0)
2122 continue;
2123 slot = radix_tree_iter_resume(slot, &iter);
2124 xa_unlock_irq(&mapping->i_pages);
2125 cond_resched();
2126 xa_lock_irq(&mapping->i_pages);
2127 }
2128 xa_unlock_irq(&mapping->i_pages);
2129}
2130EXPORT_SYMBOL(tag_pages_for_writeback);
2131
2132/**
2133 * write_cache_pages - walk the list of dirty pages of the given address space and write all of them.
2134 * @mapping: address space structure to write
2135 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
2136 * @writepage: function called for each page
2137 * @data: data passed to writepage function
2138 *
2139 * If a page is already under I/O, write_cache_pages() skips it, even
2140 * if it's dirty. This is desirable behaviour for memory-cleaning writeback,
2141 * but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
2142 * and msync() need to guarantee that all the data which was dirty at the time
2143 * the call was made get new I/O started against them. If wbc->sync_mode is
2144 * WB_SYNC_ALL then we were called for data integrity and we must wait for
2145 * existing IO to complete.
2146 *
2147 * To avoid livelocks (when other process dirties new pages), we first tag
2148 * pages which should be written back with TOWRITE tag and only then start
2149 * writing them. For data-integrity sync we have to be careful so that we do
2150 * not miss some pages (e.g., because some other process has cleared TOWRITE
2151 * tag we set). The rule we follow is that TOWRITE tag can be cleared only
2152 * by the process clearing the DIRTY tag (and submitting the page for IO).
2153 */
2154int write_cache_pages(struct address_space *mapping,
2155 struct writeback_control *wbc, writepage_t writepage,
2156 void *data)
2157{
2158 int ret = 0;
2159 int done = 0;
2160 struct pagevec pvec;
2161 int nr_pages;
2162 pgoff_t uninitialized_var(writeback_index);
2163 pgoff_t index;
2164 pgoff_t end; /* Inclusive */
2165 pgoff_t done_index;
2166 int cycled;
2167 int range_whole = 0;
2168 int tag;
2169
2170 pagevec_init(&pvec);
2171 if (wbc->range_cyclic) {
2172 writeback_index = mapping->writeback_index; /* prev offset */
2173 index = writeback_index;
2174 if (index == 0)
2175 cycled = 1;
2176 else
2177 cycled = 0;
2178 end = -1;
2179 } else {
2180 index = wbc->range_start >> PAGE_SHIFT;
2181 end = wbc->range_end >> PAGE_SHIFT;
2182 if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
2183 range_whole = 1;
2184 cycled = 1; /* ignore range_cyclic tests */
2185 }
2186 if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
2187 tag = PAGECACHE_TAG_TOWRITE;
2188 else
2189 tag = PAGECACHE_TAG_DIRTY;
2190retry:
2191 if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
2192 tag_pages_for_writeback(mapping, index, end);
2193 done_index = index;
2194 while (!done && (index <= end)) {
2195 int i;
2196
2197 nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end,
2198 tag);
2199 if (nr_pages == 0)
2200 break;
2201
2202 for (i = 0; i < nr_pages; i++) {
2203 struct page *page = pvec.pages[i];
2204
2205 done_index = page->index;
2206
2207 lock_page(page);
2208
2209 /*
2210 * Page truncated or invalidated. We can freely skip it
2211 * then, even for data integrity operations: the page
2212 * has disappeared concurrently, so there could be no
2213 * real expectation of this data interity operation
2214 * even if there is now a new, dirty page at the same
2215 * pagecache address.
2216 */
2217 if (unlikely(page->mapping != mapping)) {
2218continue_unlock:
2219 unlock_page(page);
2220 continue;
2221 }
2222
2223 if (!PageDirty(page)) {
2224 /* someone wrote it for us */
2225 goto continue_unlock;
2226 }
2227
2228 if (PageWriteback(page)) {
2229 if (wbc->sync_mode != WB_SYNC_NONE)
2230 wait_on_page_writeback(page);
2231 else
2232 goto continue_unlock;
2233 }
2234
2235 BUG_ON(PageWriteback(page));
2236 if (!clear_page_dirty_for_io(page))
2237 goto continue_unlock;
2238
2239 trace_wbc_writepage(wbc, inode_to_bdi(mapping->host));
2240 ret = (*writepage)(page, wbc, data);
2241 if (unlikely(ret)) {
2242 if (ret == AOP_WRITEPAGE_ACTIVATE) {
2243 unlock_page(page);
2244 ret = 0;
2245 } else {
2246 /*
2247 * done_index is set past this page,
2248 * so media errors will not choke
2249 * background writeout for the entire
2250 * file. This has consequences for
2251 * range_cyclic semantics (ie. it may
2252 * not be suitable for data integrity
2253 * writeout).
2254 */
2255 done_index = page->index + 1;
2256 done = 1;
2257 break;
2258 }
2259 }
2260
2261 /*
2262 * We stop writing back only if we are not doing
2263 * integrity sync. In case of integrity sync we have to
2264 * keep going until we have written all the pages
2265 * we tagged for writeback prior to entering this loop.
2266 */
2267 if (--wbc->nr_to_write <= 0 &&
2268 wbc->sync_mode == WB_SYNC_NONE) {
2269 done = 1;
2270 break;
2271 }
2272 }
2273 pagevec_release(&pvec);
2274 cond_resched();
2275 }
2276 if (!cycled && !done) {
2277 /*
2278 * range_cyclic:
2279 * We hit the last page and there is more work to be done: wrap
2280 * back to the start of the file
2281 */
2282 cycled = 1;
2283 index = 0;
2284 end = writeback_index - 1;
2285 goto retry;
2286 }
2287 if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
2288 mapping->writeback_index = done_index;
2289
2290 return ret;
2291}
2292EXPORT_SYMBOL(write_cache_pages);
2293
2294/*
2295 * Function used by generic_writepages to call the real writepage
2296 * function and set the mapping flags on error
2297 */
2298static int __writepage(struct page *page, struct writeback_control *wbc,
2299 void *data)
2300{
2301 struct address_space *mapping = data;
2302 int ret = mapping->a_ops->writepage(page, wbc);
2303 mapping_set_error(mapping, ret);
2304 return ret;
2305}
2306
2307/**
2308 * generic_writepages - walk the list of dirty pages of the given address space and writepage() all of them.
2309 * @mapping: address space structure to write
2310 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
2311 *
2312 * This is a library function, which implements the writepages()
2313 * address_space_operation.
2314 */
2315int generic_writepages(struct address_space *mapping,
2316 struct writeback_control *wbc)
2317{
2318 struct blk_plug plug;
2319 int ret;
2320
2321 /* deal with chardevs and other special file */
2322 if (!mapping->a_ops->writepage)
2323 return 0;
2324
2325 blk_start_plug(&plug);
2326 ret = write_cache_pages(mapping, wbc, __writepage, mapping);
2327 blk_finish_plug(&plug);
2328 return ret;
2329}
2330
2331EXPORT_SYMBOL(generic_writepages);
2332
2333int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
2334{
2335 int ret;
2336
2337 if (wbc->nr_to_write <= 0)
2338 return 0;
2339 while (1) {
2340 if (mapping->a_ops->writepages)
2341 ret = mapping->a_ops->writepages(mapping, wbc);
2342 else
2343 ret = generic_writepages(mapping, wbc);
2344 if ((ret != -ENOMEM) || (wbc->sync_mode != WB_SYNC_ALL))
2345 break;
2346 cond_resched();
2347 congestion_wait(BLK_RW_ASYNC, HZ/50);
2348 }
2349 return ret;
2350}
2351
2352/**
2353 * write_one_page - write out a single page and wait on I/O
2354 * @page: the page to write
2355 *
2356 * The page must be locked by the caller and will be unlocked upon return.
2357 *
2358 * Note that the mapping's AS_EIO/AS_ENOSPC flags will be cleared when this
2359 * function returns.
2360 */
2361int write_one_page(struct page *page)
2362{
2363 struct address_space *mapping = page->mapping;
2364 int ret = 0;
2365 struct writeback_control wbc = {
2366 .sync_mode = WB_SYNC_ALL,
2367 .nr_to_write = 1,
2368 };
2369
2370 BUG_ON(!PageLocked(page));
2371
2372 wait_on_page_writeback(page);
2373
2374 if (clear_page_dirty_for_io(page)) {
2375 get_page(page);
2376 ret = mapping->a_ops->writepage(page, &wbc);
2377 if (ret == 0)
2378 wait_on_page_writeback(page);
2379 put_page(page);
2380 } else {
2381 unlock_page(page);
2382 }
2383
2384 if (!ret)
2385 ret = filemap_check_errors(mapping);
2386 return ret;
2387}
2388EXPORT_SYMBOL(write_one_page);
2389
2390/*
2391 * For address_spaces which do not use buffers nor write back.
2392 */
2393int __set_page_dirty_no_writeback(struct page *page)
2394{
2395 if (!PageDirty(page))
2396 return !TestSetPageDirty(page);
2397 return 0;
2398}
2399
2400/*
2401 * Helper function for set_page_dirty family.
2402 *
2403 * Caller must hold lock_page_memcg().
2404 *
2405 * NOTE: This relies on being atomic wrt interrupts.
2406 */
2407void account_page_dirtied(struct page *page, struct address_space *mapping)
2408{
2409 struct inode *inode = mapping->host;
2410
2411 trace_writeback_dirty_page(page, mapping);
2412
2413 if (mapping_cap_account_dirty(mapping)) {
2414 struct bdi_writeback *wb;
2415
2416 inode_attach_wb(inode, page);
2417 wb = inode_to_wb(inode);
2418
2419 __inc_lruvec_page_state(page, NR_FILE_DIRTY);
2420 __inc_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2421 __inc_node_page_state(page, NR_DIRTIED);
2422 inc_wb_stat(wb, WB_RECLAIMABLE);
2423 inc_wb_stat(wb, WB_DIRTIED);
2424 task_io_account_write(PAGE_SIZE);
2425 current->nr_dirtied++;
2426 this_cpu_inc(bdp_ratelimits);
2427 }
2428}
2429EXPORT_SYMBOL(account_page_dirtied);
2430
2431/*
2432 * Helper function for deaccounting dirty page without writeback.
2433 *
2434 * Caller must hold lock_page_memcg().
2435 */
2436void account_page_cleaned(struct page *page, struct address_space *mapping,
2437 struct bdi_writeback *wb)
2438{
2439 if (mapping_cap_account_dirty(mapping)) {
2440 dec_lruvec_page_state(page, NR_FILE_DIRTY);
2441 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2442 dec_wb_stat(wb, WB_RECLAIMABLE);
2443 task_io_account_cancelled_write(PAGE_SIZE);
2444 }
2445}
2446
2447/*
2448 * For address_spaces which do not use buffers. Just tag the page as dirty in
2449 * its radix tree.
2450 *
2451 * This is also used when a single buffer is being dirtied: we want to set the
2452 * page dirty in that case, but not all the buffers. This is a "bottom-up"
2453 * dirtying, whereas __set_page_dirty_buffers() is a "top-down" dirtying.
2454 *
2455 * The caller must ensure this doesn't race with truncation. Most will simply
2456 * hold the page lock, but e.g. zap_pte_range() calls with the page mapped and
2457 * the pte lock held, which also locks out truncation.
2458 */
2459int __set_page_dirty_nobuffers(struct page *page)
2460{
2461 lock_page_memcg(page);
2462 if (!TestSetPageDirty(page)) {
2463 struct address_space *mapping = page_mapping(page);
2464 unsigned long flags;
2465
2466 if (!mapping) {
2467 unlock_page_memcg(page);
2468 return 1;
2469 }
2470
2471 xa_lock_irqsave(&mapping->i_pages, flags);
2472 BUG_ON(page_mapping(page) != mapping);
2473 WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
2474 account_page_dirtied(page, mapping);
2475 radix_tree_tag_set(&mapping->i_pages, page_index(page),
2476 PAGECACHE_TAG_DIRTY);
2477 xa_unlock_irqrestore(&mapping->i_pages, flags);
2478 unlock_page_memcg(page);
2479
2480 if (mapping->host) {
2481 /* !PageAnon && !swapper_space */
2482 __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
2483 }
2484 return 1;
2485 }
2486 unlock_page_memcg(page);
2487 return 0;
2488}
2489EXPORT_SYMBOL(__set_page_dirty_nobuffers);
2490
2491/*
2492 * Call this whenever redirtying a page, to de-account the dirty counters
2493 * (NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied), so that they match the written
2494 * counters (NR_WRITTEN, BDI_WRITTEN) in long term. The mismatches will lead to
2495 * systematic errors in balanced_dirty_ratelimit and the dirty pages position
2496 * control.
2497 */
2498void account_page_redirty(struct page *page)
2499{
2500 struct address_space *mapping = page->mapping;
2501
2502 if (mapping && mapping_cap_account_dirty(mapping)) {
2503 struct inode *inode = mapping->host;
2504 struct bdi_writeback *wb;
2505 struct wb_lock_cookie cookie = {};
2506
2507 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2508 current->nr_dirtied--;
2509 dec_node_page_state(page, NR_DIRTIED);
2510 dec_wb_stat(wb, WB_DIRTIED);
2511 unlocked_inode_to_wb_end(inode, &cookie);
2512 }
2513}
2514EXPORT_SYMBOL(account_page_redirty);
2515
2516/*
2517 * When a writepage implementation decides that it doesn't want to write this
2518 * page for some reason, it should redirty the locked page via
2519 * redirty_page_for_writepage() and it should then unlock the page and return 0
2520 */
2521int redirty_page_for_writepage(struct writeback_control *wbc, struct page *page)
2522{
2523 int ret;
2524
2525 wbc->pages_skipped++;
2526 ret = __set_page_dirty_nobuffers(page);
2527 account_page_redirty(page);
2528 return ret;
2529}
2530EXPORT_SYMBOL(redirty_page_for_writepage);
2531
2532/*
2533 * Dirty a page.
2534 *
2535 * For pages with a mapping this should be done under the page lock
2536 * for the benefit of asynchronous memory errors who prefer a consistent
2537 * dirty state. This rule can be broken in some special cases,
2538 * but should be better not to.
2539 *
2540 * If the mapping doesn't provide a set_page_dirty a_op, then
2541 * just fall through and assume that it wants buffer_heads.
2542 */
2543int set_page_dirty(struct page *page)
2544{
2545 struct address_space *mapping = page_mapping(page);
2546
2547 page = compound_head(page);
2548 if (likely(mapping)) {
2549 int (*spd)(struct page *) = mapping->a_ops->set_page_dirty;
2550 /*
2551 * readahead/lru_deactivate_page could remain
2552 * PG_readahead/PG_reclaim due to race with end_page_writeback
2553 * About readahead, if the page is written, the flags would be
2554 * reset. So no problem.
2555 * About lru_deactivate_page, if the page is redirty, the flag
2556 * will be reset. So no problem. but if the page is used by readahead
2557 * it will confuse readahead and make it restart the size rampup
2558 * process. But it's a trivial problem.
2559 */
2560 if (PageReclaim(page))
2561 ClearPageReclaim(page);
2562#ifdef CONFIG_BLOCK
2563 if (!spd)
2564 spd = __set_page_dirty_buffers;
2565#endif
2566 return (*spd)(page);
2567 }
2568 if (!PageDirty(page)) {
2569 if (!TestSetPageDirty(page))
2570 return 1;
2571 }
2572 return 0;
2573}
2574EXPORT_SYMBOL(set_page_dirty);
2575
2576/*
2577 * set_page_dirty() is racy if the caller has no reference against
2578 * page->mapping->host, and if the page is unlocked. This is because another
2579 * CPU could truncate the page off the mapping and then free the mapping.
2580 *
2581 * Usually, the page _is_ locked, or the caller is a user-space process which
2582 * holds a reference on the inode by having an open file.
2583 *
2584 * In other cases, the page should be locked before running set_page_dirty().
2585 */
2586int set_page_dirty_lock(struct page *page)
2587{
2588 int ret;
2589
2590 lock_page(page);
2591 ret = set_page_dirty(page);
2592 unlock_page(page);
2593 return ret;
2594}
2595EXPORT_SYMBOL(set_page_dirty_lock);
2596
2597/*
2598 * This cancels just the dirty bit on the kernel page itself, it does NOT
2599 * actually remove dirty bits on any mmap's that may be around. It also
2600 * leaves the page tagged dirty, so any sync activity will still find it on
2601 * the dirty lists, and in particular, clear_page_dirty_for_io() will still
2602 * look at the dirty bits in the VM.
2603 *
2604 * Doing this should *normally* only ever be done when a page is truncated,
2605 * and is not actually mapped anywhere at all. However, fs/buffer.c does
2606 * this when it notices that somebody has cleaned out all the buffers on a
2607 * page without actually doing it through the VM. Can you say "ext3 is
2608 * horribly ugly"? Thought you could.
2609 */
2610void __cancel_dirty_page(struct page *page)
2611{
2612 struct address_space *mapping = page_mapping(page);
2613
2614 if (mapping_cap_account_dirty(mapping)) {
2615 struct inode *inode = mapping->host;
2616 struct bdi_writeback *wb;
2617 struct wb_lock_cookie cookie = {};
2618
2619 lock_page_memcg(page);
2620 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2621
2622 if (TestClearPageDirty(page))
2623 account_page_cleaned(page, mapping, wb);
2624
2625 unlocked_inode_to_wb_end(inode, &cookie);
2626 unlock_page_memcg(page);
2627 } else {
2628 ClearPageDirty(page);
2629 }
2630}
2631EXPORT_SYMBOL(__cancel_dirty_page);
2632
2633/*
2634 * Clear a page's dirty flag, while caring for dirty memory accounting.
2635 * Returns true if the page was previously dirty.
2636 *
2637 * This is for preparing to put the page under writeout. We leave the page
2638 * tagged as dirty in the radix tree so that a concurrent write-for-sync
2639 * can discover it via a PAGECACHE_TAG_DIRTY walk. The ->writepage
2640 * implementation will run either set_page_writeback() or set_page_dirty(),
2641 * at which stage we bring the page's dirty flag and radix-tree dirty tag
2642 * back into sync.
2643 *
2644 * This incoherency between the page's dirty flag and radix-tree tag is
2645 * unfortunate, but it only exists while the page is locked.
2646 */
2647int clear_page_dirty_for_io(struct page *page)
2648{
2649 struct address_space *mapping = page_mapping(page);
2650 int ret = 0;
2651
2652 BUG_ON(!PageLocked(page));
2653
2654 if (mapping && mapping_cap_account_dirty(mapping)) {
2655 struct inode *inode = mapping->host;
2656 struct bdi_writeback *wb;
2657 struct wb_lock_cookie cookie = {};
2658
2659 /*
2660 * Yes, Virginia, this is indeed insane.
2661 *
2662 * We use this sequence to make sure that
2663 * (a) we account for dirty stats properly
2664 * (b) we tell the low-level filesystem to
2665 * mark the whole page dirty if it was
2666 * dirty in a pagetable. Only to then
2667 * (c) clean the page again and return 1 to
2668 * cause the writeback.
2669 *
2670 * This way we avoid all nasty races with the
2671 * dirty bit in multiple places and clearing
2672 * them concurrently from different threads.
2673 *
2674 * Note! Normally the "set_page_dirty(page)"
2675 * has no effect on the actual dirty bit - since
2676 * that will already usually be set. But we
2677 * need the side effects, and it can help us
2678 * avoid races.
2679 *
2680 * We basically use the page "master dirty bit"
2681 * as a serialization point for all the different
2682 * threads doing their things.
2683 */
2684 if (page_mkclean(page))
2685 set_page_dirty(page);
2686 /*
2687 * We carefully synchronise fault handlers against
2688 * installing a dirty pte and marking the page dirty
2689 * at this point. We do this by having them hold the
2690 * page lock while dirtying the page, and pages are
2691 * always locked coming in here, so we get the desired
2692 * exclusion.
2693 */
2694 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2695 if (TestClearPageDirty(page)) {
2696 dec_lruvec_page_state(page, NR_FILE_DIRTY);
2697 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2698 dec_wb_stat(wb, WB_RECLAIMABLE);
2699 ret = 1;
2700 }
2701 unlocked_inode_to_wb_end(inode, &cookie);
2702 return ret;
2703 }
2704 return TestClearPageDirty(page);
2705}
2706EXPORT_SYMBOL(clear_page_dirty_for_io);
2707
2708int test_clear_page_writeback(struct page *page)
2709{
2710 struct address_space *mapping = page_mapping(page);
2711 struct mem_cgroup *memcg;
2712 struct lruvec *lruvec;
2713 int ret;
2714
2715 memcg = lock_page_memcg(page);
2716 lruvec = mem_cgroup_page_lruvec(page, page_pgdat(page));
2717 if (mapping && mapping_use_writeback_tags(mapping)) {
2718 struct inode *inode = mapping->host;
2719 struct backing_dev_info *bdi = inode_to_bdi(inode);
2720 unsigned long flags;
2721
2722 xa_lock_irqsave(&mapping->i_pages, flags);
2723 ret = TestClearPageWriteback(page);
2724 if (ret) {
2725 radix_tree_tag_clear(&mapping->i_pages, page_index(page),
2726 PAGECACHE_TAG_WRITEBACK);
2727 if (bdi_cap_account_writeback(bdi)) {
2728 struct bdi_writeback *wb = inode_to_wb(inode);
2729
2730 dec_wb_stat(wb, WB_WRITEBACK);
2731 __wb_writeout_inc(wb);
2732 }
2733 }
2734
2735 if (mapping->host && !mapping_tagged(mapping,
2736 PAGECACHE_TAG_WRITEBACK))
2737 sb_clear_inode_writeback(mapping->host);
2738
2739 xa_unlock_irqrestore(&mapping->i_pages, flags);
2740 } else {
2741 ret = TestClearPageWriteback(page);
2742 }
2743 /*
2744 * NOTE: Page might be free now! Writeback doesn't hold a page
2745 * reference on its own, it relies on truncation to wait for
2746 * the clearing of PG_writeback. The below can only access
2747 * page state that is static across allocation cycles.
2748 */
2749 if (ret) {
2750 dec_lruvec_state(lruvec, NR_WRITEBACK);
2751 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2752 inc_node_page_state(page, NR_WRITTEN);
2753 }
2754 __unlock_page_memcg(memcg);
2755 return ret;
2756}
2757
2758int __test_set_page_writeback(struct page *page, bool keep_write)
2759{
2760 struct address_space *mapping = page_mapping(page);
2761 int ret;
2762
2763 lock_page_memcg(page);
2764 if (mapping && mapping_use_writeback_tags(mapping)) {
2765 struct inode *inode = mapping->host;
2766 struct backing_dev_info *bdi = inode_to_bdi(inode);
2767 unsigned long flags;
2768
2769 xa_lock_irqsave(&mapping->i_pages, flags);
2770 ret = TestSetPageWriteback(page);
2771 if (!ret) {
2772 bool on_wblist;
2773
2774 on_wblist = mapping_tagged(mapping,
2775 PAGECACHE_TAG_WRITEBACK);
2776
2777 radix_tree_tag_set(&mapping->i_pages, page_index(page),
2778 PAGECACHE_TAG_WRITEBACK);
2779 if (bdi_cap_account_writeback(bdi))
2780 inc_wb_stat(inode_to_wb(inode), WB_WRITEBACK);
2781
2782 /*
2783 * We can come through here when swapping anonymous
2784 * pages, so we don't necessarily have an inode to track
2785 * for sync.
2786 */
2787 if (mapping->host && !on_wblist)
2788 sb_mark_inode_writeback(mapping->host);
2789 }
2790 if (!PageDirty(page))
2791 radix_tree_tag_clear(&mapping->i_pages, page_index(page),
2792 PAGECACHE_TAG_DIRTY);
2793 if (!keep_write)
2794 radix_tree_tag_clear(&mapping->i_pages, page_index(page),
2795 PAGECACHE_TAG_TOWRITE);
2796 xa_unlock_irqrestore(&mapping->i_pages, flags);
2797 } else {
2798 ret = TestSetPageWriteback(page);
2799 }
2800 if (!ret) {
2801 inc_lruvec_page_state(page, NR_WRITEBACK);
2802 inc_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2803 }
2804 unlock_page_memcg(page);
2805 return ret;
2806
2807}
2808EXPORT_SYMBOL(__test_set_page_writeback);
2809
2810/*
2811 * Return true if any of the pages in the mapping are marked with the
2812 * passed tag.
2813 */
2814int mapping_tagged(struct address_space *mapping, int tag)
2815{
2816 return radix_tree_tagged(&mapping->i_pages, tag);
2817}
2818EXPORT_SYMBOL(mapping_tagged);
2819
2820/**
2821 * wait_for_stable_page() - wait for writeback to finish, if necessary.
2822 * @page: The page to wait on.
2823 *
2824 * This function determines if the given page is related to a backing device
2825 * that requires page contents to be held stable during writeback. If so, then
2826 * it will wait for any pending writeback to complete.
2827 */
2828void wait_for_stable_page(struct page *page)
2829{
2830 if (bdi_cap_stable_pages_required(inode_to_bdi(page->mapping->host)))
2831 wait_on_page_writeback(page);
2832}
2833EXPORT_SYMBOL_GPL(wait_for_stable_page);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * mm/page-writeback.c
4 *
5 * Copyright (C) 2002, Linus Torvalds.
6 * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra
7 *
8 * Contains functions related to writing back dirty pages at the
9 * address_space level.
10 *
11 * 10Apr2002 Andrew Morton
12 * Initial version
13 */
14
15#include <linux/kernel.h>
16#include <linux/export.h>
17#include <linux/spinlock.h>
18#include <linux/fs.h>
19#include <linux/mm.h>
20#include <linux/swap.h>
21#include <linux/slab.h>
22#include <linux/pagemap.h>
23#include <linux/writeback.h>
24#include <linux/init.h>
25#include <linux/backing-dev.h>
26#include <linux/task_io_accounting_ops.h>
27#include <linux/blkdev.h>
28#include <linux/mpage.h>
29#include <linux/rmap.h>
30#include <linux/percpu.h>
31#include <linux/smp.h>
32#include <linux/sysctl.h>
33#include <linux/cpu.h>
34#include <linux/syscalls.h>
35#include <linux/pagevec.h>
36#include <linux/timer.h>
37#include <linux/sched/rt.h>
38#include <linux/sched/signal.h>
39#include <linux/mm_inline.h>
40#include <trace/events/writeback.h>
41
42#include "internal.h"
43
44/*
45 * Sleep at most 200ms at a time in balance_dirty_pages().
46 */
47#define MAX_PAUSE max(HZ/5, 1)
48
49/*
50 * Try to keep balance_dirty_pages() call intervals higher than this many pages
51 * by raising pause time to max_pause when falls below it.
52 */
53#define DIRTY_POLL_THRESH (128 >> (PAGE_SHIFT - 10))
54
55/*
56 * Estimate write bandwidth at 200ms intervals.
57 */
58#define BANDWIDTH_INTERVAL max(HZ/5, 1)
59
60#define RATELIMIT_CALC_SHIFT 10
61
62/*
63 * After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
64 * will look to see if it needs to force writeback or throttling.
65 */
66static long ratelimit_pages = 32;
67
68/* The following parameters are exported via /proc/sys/vm */
69
70/*
71 * Start background writeback (via writeback threads) at this percentage
72 */
73int dirty_background_ratio = 10;
74
75/*
76 * dirty_background_bytes starts at 0 (disabled) so that it is a function of
77 * dirty_background_ratio * the amount of dirtyable memory
78 */
79unsigned long dirty_background_bytes;
80
81/*
82 * free highmem will not be subtracted from the total free memory
83 * for calculating free ratios if vm_highmem_is_dirtyable is true
84 */
85int vm_highmem_is_dirtyable;
86
87/*
88 * The generator of dirty data starts writeback at this percentage
89 */
90int vm_dirty_ratio = 20;
91
92/*
93 * vm_dirty_bytes starts at 0 (disabled) so that it is a function of
94 * vm_dirty_ratio * the amount of dirtyable memory
95 */
96unsigned long vm_dirty_bytes;
97
98/*
99 * The interval between `kupdate'-style writebacks
100 */
101unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
102
103EXPORT_SYMBOL_GPL(dirty_writeback_interval);
104
105/*
106 * The longest time for which data is allowed to remain dirty
107 */
108unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
109
110/*
111 * Flag that puts the machine in "laptop mode". Doubles as a timeout in jiffies:
112 * a full sync is triggered after this time elapses without any disk activity.
113 */
114int laptop_mode;
115
116EXPORT_SYMBOL(laptop_mode);
117
118/* End of sysctl-exported parameters */
119
120struct wb_domain global_wb_domain;
121
122/* consolidated parameters for balance_dirty_pages() and its subroutines */
123struct dirty_throttle_control {
124#ifdef CONFIG_CGROUP_WRITEBACK
125 struct wb_domain *dom;
126 struct dirty_throttle_control *gdtc; /* only set in memcg dtc's */
127#endif
128 struct bdi_writeback *wb;
129 struct fprop_local_percpu *wb_completions;
130
131 unsigned long avail; /* dirtyable */
132 unsigned long dirty; /* file_dirty + write + nfs */
133 unsigned long thresh; /* dirty threshold */
134 unsigned long bg_thresh; /* dirty background threshold */
135
136 unsigned long wb_dirty; /* per-wb counterparts */
137 unsigned long wb_thresh;
138 unsigned long wb_bg_thresh;
139
140 unsigned long pos_ratio;
141};
142
143/*
144 * Length of period for aging writeout fractions of bdis. This is an
145 * arbitrarily chosen number. The longer the period, the slower fractions will
146 * reflect changes in current writeout rate.
147 */
148#define VM_COMPLETIONS_PERIOD_LEN (3*HZ)
149
150#ifdef CONFIG_CGROUP_WRITEBACK
151
152#define GDTC_INIT(__wb) .wb = (__wb), \
153 .dom = &global_wb_domain, \
154 .wb_completions = &(__wb)->completions
155
156#define GDTC_INIT_NO_WB .dom = &global_wb_domain
157
158#define MDTC_INIT(__wb, __gdtc) .wb = (__wb), \
159 .dom = mem_cgroup_wb_domain(__wb), \
160 .wb_completions = &(__wb)->memcg_completions, \
161 .gdtc = __gdtc
162
163static bool mdtc_valid(struct dirty_throttle_control *dtc)
164{
165 return dtc->dom;
166}
167
168static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc)
169{
170 return dtc->dom;
171}
172
173static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc)
174{
175 return mdtc->gdtc;
176}
177
178static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)
179{
180 return &wb->memcg_completions;
181}
182
183static void wb_min_max_ratio(struct bdi_writeback *wb,
184 unsigned long *minp, unsigned long *maxp)
185{
186 unsigned long this_bw = wb->avg_write_bandwidth;
187 unsigned long tot_bw = atomic_long_read(&wb->bdi->tot_write_bandwidth);
188 unsigned long long min = wb->bdi->min_ratio;
189 unsigned long long max = wb->bdi->max_ratio;
190
191 /*
192 * @wb may already be clean by the time control reaches here and
193 * the total may not include its bw.
194 */
195 if (this_bw < tot_bw) {
196 if (min) {
197 min *= this_bw;
198 min = div64_ul(min, tot_bw);
199 }
200 if (max < 100) {
201 max *= this_bw;
202 max = div64_ul(max, tot_bw);
203 }
204 }
205
206 *minp = min;
207 *maxp = max;
208}
209
210#else /* CONFIG_CGROUP_WRITEBACK */
211
212#define GDTC_INIT(__wb) .wb = (__wb), \
213 .wb_completions = &(__wb)->completions
214#define GDTC_INIT_NO_WB
215#define MDTC_INIT(__wb, __gdtc)
216
217static bool mdtc_valid(struct dirty_throttle_control *dtc)
218{
219 return false;
220}
221
222static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc)
223{
224 return &global_wb_domain;
225}
226
227static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc)
228{
229 return NULL;
230}
231
232static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)
233{
234 return NULL;
235}
236
237static void wb_min_max_ratio(struct bdi_writeback *wb,
238 unsigned long *minp, unsigned long *maxp)
239{
240 *minp = wb->bdi->min_ratio;
241 *maxp = wb->bdi->max_ratio;
242}
243
244#endif /* CONFIG_CGROUP_WRITEBACK */
245
246/*
247 * In a memory zone, there is a certain amount of pages we consider
248 * available for the page cache, which is essentially the number of
249 * free and reclaimable pages, minus some zone reserves to protect
250 * lowmem and the ability to uphold the zone's watermarks without
251 * requiring writeback.
252 *
253 * This number of dirtyable pages is the base value of which the
254 * user-configurable dirty ratio is the effective number of pages that
255 * are allowed to be actually dirtied. Per individual zone, or
256 * globally by using the sum of dirtyable pages over all zones.
257 *
258 * Because the user is allowed to specify the dirty limit globally as
259 * absolute number of bytes, calculating the per-zone dirty limit can
260 * require translating the configured limit into a percentage of
261 * global dirtyable memory first.
262 */
263
264/**
265 * node_dirtyable_memory - number of dirtyable pages in a node
266 * @pgdat: the node
267 *
268 * Return: the node's number of pages potentially available for dirty
269 * page cache. This is the base value for the per-node dirty limits.
270 */
271static unsigned long node_dirtyable_memory(struct pglist_data *pgdat)
272{
273 unsigned long nr_pages = 0;
274 int z;
275
276 for (z = 0; z < MAX_NR_ZONES; z++) {
277 struct zone *zone = pgdat->node_zones + z;
278
279 if (!populated_zone(zone))
280 continue;
281
282 nr_pages += zone_page_state(zone, NR_FREE_PAGES);
283 }
284
285 /*
286 * Pages reserved for the kernel should not be considered
287 * dirtyable, to prevent a situation where reclaim has to
288 * clean pages in order to balance the zones.
289 */
290 nr_pages -= min(nr_pages, pgdat->totalreserve_pages);
291
292 nr_pages += node_page_state(pgdat, NR_INACTIVE_FILE);
293 nr_pages += node_page_state(pgdat, NR_ACTIVE_FILE);
294
295 return nr_pages;
296}
297
298static unsigned long highmem_dirtyable_memory(unsigned long total)
299{
300#ifdef CONFIG_HIGHMEM
301 int node;
302 unsigned long x = 0;
303 int i;
304
305 for_each_node_state(node, N_HIGH_MEMORY) {
306 for (i = ZONE_NORMAL + 1; i < MAX_NR_ZONES; i++) {
307 struct zone *z;
308 unsigned long nr_pages;
309
310 if (!is_highmem_idx(i))
311 continue;
312
313 z = &NODE_DATA(node)->node_zones[i];
314 if (!populated_zone(z))
315 continue;
316
317 nr_pages = zone_page_state(z, NR_FREE_PAGES);
318 /* watch for underflows */
319 nr_pages -= min(nr_pages, high_wmark_pages(z));
320 nr_pages += zone_page_state(z, NR_ZONE_INACTIVE_FILE);
321 nr_pages += zone_page_state(z, NR_ZONE_ACTIVE_FILE);
322 x += nr_pages;
323 }
324 }
325
326 /*
327 * Unreclaimable memory (kernel memory or anonymous memory
328 * without swap) can bring down the dirtyable pages below
329 * the zone's dirty balance reserve and the above calculation
330 * will underflow. However we still want to add in nodes
331 * which are below threshold (negative values) to get a more
332 * accurate calculation but make sure that the total never
333 * underflows.
334 */
335 if ((long)x < 0)
336 x = 0;
337
338 /*
339 * Make sure that the number of highmem pages is never larger
340 * than the number of the total dirtyable memory. This can only
341 * occur in very strange VM situations but we want to make sure
342 * that this does not occur.
343 */
344 return min(x, total);
345#else
346 return 0;
347#endif
348}
349
350/**
351 * global_dirtyable_memory - number of globally dirtyable pages
352 *
353 * Return: the global number of pages potentially available for dirty
354 * page cache. This is the base value for the global dirty limits.
355 */
356static unsigned long global_dirtyable_memory(void)
357{
358 unsigned long x;
359
360 x = global_zone_page_state(NR_FREE_PAGES);
361 /*
362 * Pages reserved for the kernel should not be considered
363 * dirtyable, to prevent a situation where reclaim has to
364 * clean pages in order to balance the zones.
365 */
366 x -= min(x, totalreserve_pages);
367
368 x += global_node_page_state(NR_INACTIVE_FILE);
369 x += global_node_page_state(NR_ACTIVE_FILE);
370
371 if (!vm_highmem_is_dirtyable)
372 x -= highmem_dirtyable_memory(x);
373
374 return x + 1; /* Ensure that we never return 0 */
375}
376
377/**
378 * domain_dirty_limits - calculate thresh and bg_thresh for a wb_domain
379 * @dtc: dirty_throttle_control of interest
380 *
381 * Calculate @dtc->thresh and ->bg_thresh considering
382 * vm_dirty_{bytes|ratio} and dirty_background_{bytes|ratio}. The caller
383 * must ensure that @dtc->avail is set before calling this function. The
384 * dirty limits will be lifted by 1/4 for real-time tasks.
385 */
386static void domain_dirty_limits(struct dirty_throttle_control *dtc)
387{
388 const unsigned long available_memory = dtc->avail;
389 struct dirty_throttle_control *gdtc = mdtc_gdtc(dtc);
390 unsigned long bytes = vm_dirty_bytes;
391 unsigned long bg_bytes = dirty_background_bytes;
392 /* convert ratios to per-PAGE_SIZE for higher precision */
393 unsigned long ratio = (vm_dirty_ratio * PAGE_SIZE) / 100;
394 unsigned long bg_ratio = (dirty_background_ratio * PAGE_SIZE) / 100;
395 unsigned long thresh;
396 unsigned long bg_thresh;
397 struct task_struct *tsk;
398
399 /* gdtc is !NULL iff @dtc is for memcg domain */
400 if (gdtc) {
401 unsigned long global_avail = gdtc->avail;
402
403 /*
404 * The byte settings can't be applied directly to memcg
405 * domains. Convert them to ratios by scaling against
406 * globally available memory. As the ratios are in
407 * per-PAGE_SIZE, they can be obtained by dividing bytes by
408 * number of pages.
409 */
410 if (bytes)
411 ratio = min(DIV_ROUND_UP(bytes, global_avail),
412 PAGE_SIZE);
413 if (bg_bytes)
414 bg_ratio = min(DIV_ROUND_UP(bg_bytes, global_avail),
415 PAGE_SIZE);
416 bytes = bg_bytes = 0;
417 }
418
419 if (bytes)
420 thresh = DIV_ROUND_UP(bytes, PAGE_SIZE);
421 else
422 thresh = (ratio * available_memory) / PAGE_SIZE;
423
424 if (bg_bytes)
425 bg_thresh = DIV_ROUND_UP(bg_bytes, PAGE_SIZE);
426 else
427 bg_thresh = (bg_ratio * available_memory) / PAGE_SIZE;
428
429 if (bg_thresh >= thresh)
430 bg_thresh = thresh / 2;
431 tsk = current;
432 if (rt_task(tsk)) {
433 bg_thresh += bg_thresh / 4 + global_wb_domain.dirty_limit / 32;
434 thresh += thresh / 4 + global_wb_domain.dirty_limit / 32;
435 }
436 dtc->thresh = thresh;
437 dtc->bg_thresh = bg_thresh;
438
439 /* we should eventually report the domain in the TP */
440 if (!gdtc)
441 trace_global_dirty_state(bg_thresh, thresh);
442}
443
444/**
445 * global_dirty_limits - background-writeback and dirty-throttling thresholds
446 * @pbackground: out parameter for bg_thresh
447 * @pdirty: out parameter for thresh
448 *
449 * Calculate bg_thresh and thresh for global_wb_domain. See
450 * domain_dirty_limits() for details.
451 */
452void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
453{
454 struct dirty_throttle_control gdtc = { GDTC_INIT_NO_WB };
455
456 gdtc.avail = global_dirtyable_memory();
457 domain_dirty_limits(&gdtc);
458
459 *pbackground = gdtc.bg_thresh;
460 *pdirty = gdtc.thresh;
461}
462
463/**
464 * node_dirty_limit - maximum number of dirty pages allowed in a node
465 * @pgdat: the node
466 *
467 * Return: the maximum number of dirty pages allowed in a node, based
468 * on the node's dirtyable memory.
469 */
470static unsigned long node_dirty_limit(struct pglist_data *pgdat)
471{
472 unsigned long node_memory = node_dirtyable_memory(pgdat);
473 struct task_struct *tsk = current;
474 unsigned long dirty;
475
476 if (vm_dirty_bytes)
477 dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE) *
478 node_memory / global_dirtyable_memory();
479 else
480 dirty = vm_dirty_ratio * node_memory / 100;
481
482 if (rt_task(tsk))
483 dirty += dirty / 4;
484
485 return dirty;
486}
487
488/**
489 * node_dirty_ok - tells whether a node is within its dirty limits
490 * @pgdat: the node to check
491 *
492 * Return: %true when the dirty pages in @pgdat are within the node's
493 * dirty limit, %false if the limit is exceeded.
494 */
495bool node_dirty_ok(struct pglist_data *pgdat)
496{
497 unsigned long limit = node_dirty_limit(pgdat);
498 unsigned long nr_pages = 0;
499
500 nr_pages += node_page_state(pgdat, NR_FILE_DIRTY);
501 nr_pages += node_page_state(pgdat, NR_WRITEBACK);
502
503 return nr_pages <= limit;
504}
505
506int dirty_background_ratio_handler(struct ctl_table *table, int write,
507 void *buffer, size_t *lenp, loff_t *ppos)
508{
509 int ret;
510
511 ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
512 if (ret == 0 && write)
513 dirty_background_bytes = 0;
514 return ret;
515}
516
517int dirty_background_bytes_handler(struct ctl_table *table, int write,
518 void *buffer, size_t *lenp, loff_t *ppos)
519{
520 int ret;
521
522 ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
523 if (ret == 0 && write)
524 dirty_background_ratio = 0;
525 return ret;
526}
527
528int dirty_ratio_handler(struct ctl_table *table, int write, void *buffer,
529 size_t *lenp, loff_t *ppos)
530{
531 int old_ratio = vm_dirty_ratio;
532 int ret;
533
534 ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
535 if (ret == 0 && write && vm_dirty_ratio != old_ratio) {
536 writeback_set_ratelimit();
537 vm_dirty_bytes = 0;
538 }
539 return ret;
540}
541
542int dirty_bytes_handler(struct ctl_table *table, int write,
543 void *buffer, size_t *lenp, loff_t *ppos)
544{
545 unsigned long old_bytes = vm_dirty_bytes;
546 int ret;
547
548 ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
549 if (ret == 0 && write && vm_dirty_bytes != old_bytes) {
550 writeback_set_ratelimit();
551 vm_dirty_ratio = 0;
552 }
553 return ret;
554}
555
556static unsigned long wp_next_time(unsigned long cur_time)
557{
558 cur_time += VM_COMPLETIONS_PERIOD_LEN;
559 /* 0 has a special meaning... */
560 if (!cur_time)
561 return 1;
562 return cur_time;
563}
564
565static void wb_domain_writeout_inc(struct wb_domain *dom,
566 struct fprop_local_percpu *completions,
567 unsigned int max_prop_frac)
568{
569 __fprop_inc_percpu_max(&dom->completions, completions,
570 max_prop_frac);
571 /* First event after period switching was turned off? */
572 if (unlikely(!dom->period_time)) {
573 /*
574 * We can race with other __bdi_writeout_inc calls here but
575 * it does not cause any harm since the resulting time when
576 * timer will fire and what is in writeout_period_time will be
577 * roughly the same.
578 */
579 dom->period_time = wp_next_time(jiffies);
580 mod_timer(&dom->period_timer, dom->period_time);
581 }
582}
583
584/*
585 * Increment @wb's writeout completion count and the global writeout
586 * completion count. Called from test_clear_page_writeback().
587 */
588static inline void __wb_writeout_inc(struct bdi_writeback *wb)
589{
590 struct wb_domain *cgdom;
591
592 inc_wb_stat(wb, WB_WRITTEN);
593 wb_domain_writeout_inc(&global_wb_domain, &wb->completions,
594 wb->bdi->max_prop_frac);
595
596 cgdom = mem_cgroup_wb_domain(wb);
597 if (cgdom)
598 wb_domain_writeout_inc(cgdom, wb_memcg_completions(wb),
599 wb->bdi->max_prop_frac);
600}
601
602void wb_writeout_inc(struct bdi_writeback *wb)
603{
604 unsigned long flags;
605
606 local_irq_save(flags);
607 __wb_writeout_inc(wb);
608 local_irq_restore(flags);
609}
610EXPORT_SYMBOL_GPL(wb_writeout_inc);
611
612/*
613 * On idle system, we can be called long after we scheduled because we use
614 * deferred timers so count with missed periods.
615 */
616static void writeout_period(struct timer_list *t)
617{
618 struct wb_domain *dom = from_timer(dom, t, period_timer);
619 int miss_periods = (jiffies - dom->period_time) /
620 VM_COMPLETIONS_PERIOD_LEN;
621
622 if (fprop_new_period(&dom->completions, miss_periods + 1)) {
623 dom->period_time = wp_next_time(dom->period_time +
624 miss_periods * VM_COMPLETIONS_PERIOD_LEN);
625 mod_timer(&dom->period_timer, dom->period_time);
626 } else {
627 /*
628 * Aging has zeroed all fractions. Stop wasting CPU on period
629 * updates.
630 */
631 dom->period_time = 0;
632 }
633}
634
635int wb_domain_init(struct wb_domain *dom, gfp_t gfp)
636{
637 memset(dom, 0, sizeof(*dom));
638
639 spin_lock_init(&dom->lock);
640
641 timer_setup(&dom->period_timer, writeout_period, TIMER_DEFERRABLE);
642
643 dom->dirty_limit_tstamp = jiffies;
644
645 return fprop_global_init(&dom->completions, gfp);
646}
647
648#ifdef CONFIG_CGROUP_WRITEBACK
649void wb_domain_exit(struct wb_domain *dom)
650{
651 del_timer_sync(&dom->period_timer);
652 fprop_global_destroy(&dom->completions);
653}
654#endif
655
656/*
657 * bdi_min_ratio keeps the sum of the minimum dirty shares of all
658 * registered backing devices, which, for obvious reasons, can not
659 * exceed 100%.
660 */
661static unsigned int bdi_min_ratio;
662
663int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
664{
665 int ret = 0;
666
667 spin_lock_bh(&bdi_lock);
668 if (min_ratio > bdi->max_ratio) {
669 ret = -EINVAL;
670 } else {
671 min_ratio -= bdi->min_ratio;
672 if (bdi_min_ratio + min_ratio < 100) {
673 bdi_min_ratio += min_ratio;
674 bdi->min_ratio += min_ratio;
675 } else {
676 ret = -EINVAL;
677 }
678 }
679 spin_unlock_bh(&bdi_lock);
680
681 return ret;
682}
683
684int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio)
685{
686 int ret = 0;
687
688 if (max_ratio > 100)
689 return -EINVAL;
690
691 spin_lock_bh(&bdi_lock);
692 if (bdi->min_ratio > max_ratio) {
693 ret = -EINVAL;
694 } else {
695 bdi->max_ratio = max_ratio;
696 bdi->max_prop_frac = (FPROP_FRAC_BASE * max_ratio) / 100;
697 }
698 spin_unlock_bh(&bdi_lock);
699
700 return ret;
701}
702EXPORT_SYMBOL(bdi_set_max_ratio);
703
704static unsigned long dirty_freerun_ceiling(unsigned long thresh,
705 unsigned long bg_thresh)
706{
707 return (thresh + bg_thresh) / 2;
708}
709
710static unsigned long hard_dirty_limit(struct wb_domain *dom,
711 unsigned long thresh)
712{
713 return max(thresh, dom->dirty_limit);
714}
715
716/*
717 * Memory which can be further allocated to a memcg domain is capped by
718 * system-wide clean memory excluding the amount being used in the domain.
719 */
720static void mdtc_calc_avail(struct dirty_throttle_control *mdtc,
721 unsigned long filepages, unsigned long headroom)
722{
723 struct dirty_throttle_control *gdtc = mdtc_gdtc(mdtc);
724 unsigned long clean = filepages - min(filepages, mdtc->dirty);
725 unsigned long global_clean = gdtc->avail - min(gdtc->avail, gdtc->dirty);
726 unsigned long other_clean = global_clean - min(global_clean, clean);
727
728 mdtc->avail = filepages + min(headroom, other_clean);
729}
730
731/**
732 * __wb_calc_thresh - @wb's share of dirty throttling threshold
733 * @dtc: dirty_throttle_context of interest
734 *
735 * Note that balance_dirty_pages() will only seriously take it as a hard limit
736 * when sleeping max_pause per page is not enough to keep the dirty pages under
737 * control. For example, when the device is completely stalled due to some error
738 * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key.
739 * In the other normal situations, it acts more gently by throttling the tasks
740 * more (rather than completely block them) when the wb dirty pages go high.
741 *
742 * It allocates high/low dirty limits to fast/slow devices, in order to prevent
743 * - starving fast devices
744 * - piling up dirty pages (that will take long time to sync) on slow devices
745 *
746 * The wb's share of dirty limit will be adapting to its throughput and
747 * bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set.
748 *
749 * Return: @wb's dirty limit in pages. The term "dirty" in the context of
750 * dirty balancing includes all PG_dirty and PG_writeback pages.
751 */
752static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc)
753{
754 struct wb_domain *dom = dtc_dom(dtc);
755 unsigned long thresh = dtc->thresh;
756 u64 wb_thresh;
757 unsigned long numerator, denominator;
758 unsigned long wb_min_ratio, wb_max_ratio;
759
760 /*
761 * Calculate this BDI's share of the thresh ratio.
762 */
763 fprop_fraction_percpu(&dom->completions, dtc->wb_completions,
764 &numerator, &denominator);
765
766 wb_thresh = (thresh * (100 - bdi_min_ratio)) / 100;
767 wb_thresh *= numerator;
768 wb_thresh = div64_ul(wb_thresh, denominator);
769
770 wb_min_max_ratio(dtc->wb, &wb_min_ratio, &wb_max_ratio);
771
772 wb_thresh += (thresh * wb_min_ratio) / 100;
773 if (wb_thresh > (thresh * wb_max_ratio) / 100)
774 wb_thresh = thresh * wb_max_ratio / 100;
775
776 return wb_thresh;
777}
778
779unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh)
780{
781 struct dirty_throttle_control gdtc = { GDTC_INIT(wb),
782 .thresh = thresh };
783 return __wb_calc_thresh(&gdtc);
784}
785
786/*
787 * setpoint - dirty 3
788 * f(dirty) := 1.0 + (----------------)
789 * limit - setpoint
790 *
791 * it's a 3rd order polynomial that subjects to
792 *
793 * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
794 * (2) f(setpoint) = 1.0 => the balance point
795 * (3) f(limit) = 0 => the hard limit
796 * (4) df/dx <= 0 => negative feedback control
797 * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
798 * => fast response on large errors; small oscillation near setpoint
799 */
800static long long pos_ratio_polynom(unsigned long setpoint,
801 unsigned long dirty,
802 unsigned long limit)
803{
804 long long pos_ratio;
805 long x;
806
807 x = div64_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
808 (limit - setpoint) | 1);
809 pos_ratio = x;
810 pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
811 pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
812 pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
813
814 return clamp(pos_ratio, 0LL, 2LL << RATELIMIT_CALC_SHIFT);
815}
816
817/*
818 * Dirty position control.
819 *
820 * (o) global/bdi setpoints
821 *
822 * We want the dirty pages be balanced around the global/wb setpoints.
823 * When the number of dirty pages is higher/lower than the setpoint, the
824 * dirty position control ratio (and hence task dirty ratelimit) will be
825 * decreased/increased to bring the dirty pages back to the setpoint.
826 *
827 * pos_ratio = 1 << RATELIMIT_CALC_SHIFT
828 *
829 * if (dirty < setpoint) scale up pos_ratio
830 * if (dirty > setpoint) scale down pos_ratio
831 *
832 * if (wb_dirty < wb_setpoint) scale up pos_ratio
833 * if (wb_dirty > wb_setpoint) scale down pos_ratio
834 *
835 * task_ratelimit = dirty_ratelimit * pos_ratio >> RATELIMIT_CALC_SHIFT
836 *
837 * (o) global control line
838 *
839 * ^ pos_ratio
840 * |
841 * | |<===== global dirty control scope ======>|
842 * 2.0 * * * * * * *
843 * | .*
844 * | . *
845 * | . *
846 * | . *
847 * | . *
848 * | . *
849 * 1.0 ................................*
850 * | . . *
851 * | . . *
852 * | . . *
853 * | . . *
854 * | . . *
855 * 0 +------------.------------------.----------------------*------------->
856 * freerun^ setpoint^ limit^ dirty pages
857 *
858 * (o) wb control line
859 *
860 * ^ pos_ratio
861 * |
862 * | *
863 * | *
864 * | *
865 * | *
866 * | * |<=========== span ============>|
867 * 1.0 .......................*
868 * | . *
869 * | . *
870 * | . *
871 * | . *
872 * | . *
873 * | . *
874 * | . *
875 * | . *
876 * | . *
877 * | . *
878 * | . *
879 * 1/4 ...............................................* * * * * * * * * * * *
880 * | . .
881 * | . .
882 * | . .
883 * 0 +----------------------.-------------------------------.------------->
884 * wb_setpoint^ x_intercept^
885 *
886 * The wb control line won't drop below pos_ratio=1/4, so that wb_dirty can
887 * be smoothly throttled down to normal if it starts high in situations like
888 * - start writing to a slow SD card and a fast disk at the same time. The SD
889 * card's wb_dirty may rush to many times higher than wb_setpoint.
890 * - the wb dirty thresh drops quickly due to change of JBOD workload
891 */
892static void wb_position_ratio(struct dirty_throttle_control *dtc)
893{
894 struct bdi_writeback *wb = dtc->wb;
895 unsigned long write_bw = wb->avg_write_bandwidth;
896 unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
897 unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
898 unsigned long wb_thresh = dtc->wb_thresh;
899 unsigned long x_intercept;
900 unsigned long setpoint; /* dirty pages' target balance point */
901 unsigned long wb_setpoint;
902 unsigned long span;
903 long long pos_ratio; /* for scaling up/down the rate limit */
904 long x;
905
906 dtc->pos_ratio = 0;
907
908 if (unlikely(dtc->dirty >= limit))
909 return;
910
911 /*
912 * global setpoint
913 *
914 * See comment for pos_ratio_polynom().
915 */
916 setpoint = (freerun + limit) / 2;
917 pos_ratio = pos_ratio_polynom(setpoint, dtc->dirty, limit);
918
919 /*
920 * The strictlimit feature is a tool preventing mistrusted filesystems
921 * from growing a large number of dirty pages before throttling. For
922 * such filesystems balance_dirty_pages always checks wb counters
923 * against wb limits. Even if global "nr_dirty" is under "freerun".
924 * This is especially important for fuse which sets bdi->max_ratio to
925 * 1% by default. Without strictlimit feature, fuse writeback may
926 * consume arbitrary amount of RAM because it is accounted in
927 * NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty".
928 *
929 * Here, in wb_position_ratio(), we calculate pos_ratio based on
930 * two values: wb_dirty and wb_thresh. Let's consider an example:
931 * total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global
932 * limits are set by default to 10% and 20% (background and throttle).
933 * Then wb_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
934 * wb_calc_thresh(wb, bg_thresh) is about ~4K pages. wb_setpoint is
935 * about ~6K pages (as the average of background and throttle wb
936 * limits). The 3rd order polynomial will provide positive feedback if
937 * wb_dirty is under wb_setpoint and vice versa.
938 *
939 * Note, that we cannot use global counters in these calculations
940 * because we want to throttle process writing to a strictlimit wb
941 * much earlier than global "freerun" is reached (~23MB vs. ~2.3GB
942 * in the example above).
943 */
944 if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
945 long long wb_pos_ratio;
946
947 if (dtc->wb_dirty < 8) {
948 dtc->pos_ratio = min_t(long long, pos_ratio * 2,
949 2 << RATELIMIT_CALC_SHIFT);
950 return;
951 }
952
953 if (dtc->wb_dirty >= wb_thresh)
954 return;
955
956 wb_setpoint = dirty_freerun_ceiling(wb_thresh,
957 dtc->wb_bg_thresh);
958
959 if (wb_setpoint == 0 || wb_setpoint == wb_thresh)
960 return;
961
962 wb_pos_ratio = pos_ratio_polynom(wb_setpoint, dtc->wb_dirty,
963 wb_thresh);
964
965 /*
966 * Typically, for strictlimit case, wb_setpoint << setpoint
967 * and pos_ratio >> wb_pos_ratio. In the other words global
968 * state ("dirty") is not limiting factor and we have to
969 * make decision based on wb counters. But there is an
970 * important case when global pos_ratio should get precedence:
971 * global limits are exceeded (e.g. due to activities on other
972 * wb's) while given strictlimit wb is below limit.
973 *
974 * "pos_ratio * wb_pos_ratio" would work for the case above,
975 * but it would look too non-natural for the case of all
976 * activity in the system coming from a single strictlimit wb
977 * with bdi->max_ratio == 100%.
978 *
979 * Note that min() below somewhat changes the dynamics of the
980 * control system. Normally, pos_ratio value can be well over 3
981 * (when globally we are at freerun and wb is well below wb
982 * setpoint). Now the maximum pos_ratio in the same situation
983 * is 2. We might want to tweak this if we observe the control
984 * system is too slow to adapt.
985 */
986 dtc->pos_ratio = min(pos_ratio, wb_pos_ratio);
987 return;
988 }
989
990 /*
991 * We have computed basic pos_ratio above based on global situation. If
992 * the wb is over/under its share of dirty pages, we want to scale
993 * pos_ratio further down/up. That is done by the following mechanism.
994 */
995
996 /*
997 * wb setpoint
998 *
999 * f(wb_dirty) := 1.0 + k * (wb_dirty - wb_setpoint)
1000 *
1001 * x_intercept - wb_dirty
1002 * := --------------------------
1003 * x_intercept - wb_setpoint
1004 *
1005 * The main wb control line is a linear function that subjects to
1006 *
1007 * (1) f(wb_setpoint) = 1.0
1008 * (2) k = - 1 / (8 * write_bw) (in single wb case)
1009 * or equally: x_intercept = wb_setpoint + 8 * write_bw
1010 *
1011 * For single wb case, the dirty pages are observed to fluctuate
1012 * regularly within range
1013 * [wb_setpoint - write_bw/2, wb_setpoint + write_bw/2]
1014 * for various filesystems, where (2) can yield in a reasonable 12.5%
1015 * fluctuation range for pos_ratio.
1016 *
1017 * For JBOD case, wb_thresh (not wb_dirty!) could fluctuate up to its
1018 * own size, so move the slope over accordingly and choose a slope that
1019 * yields 100% pos_ratio fluctuation on suddenly doubled wb_thresh.
1020 */
1021 if (unlikely(wb_thresh > dtc->thresh))
1022 wb_thresh = dtc->thresh;
1023 /*
1024 * It's very possible that wb_thresh is close to 0 not because the
1025 * device is slow, but that it has remained inactive for long time.
1026 * Honour such devices a reasonable good (hopefully IO efficient)
1027 * threshold, so that the occasional writes won't be blocked and active
1028 * writes can rampup the threshold quickly.
1029 */
1030 wb_thresh = max(wb_thresh, (limit - dtc->dirty) / 8);
1031 /*
1032 * scale global setpoint to wb's:
1033 * wb_setpoint = setpoint * wb_thresh / thresh
1034 */
1035 x = div_u64((u64)wb_thresh << 16, dtc->thresh | 1);
1036 wb_setpoint = setpoint * (u64)x >> 16;
1037 /*
1038 * Use span=(8*write_bw) in single wb case as indicated by
1039 * (thresh - wb_thresh ~= 0) and transit to wb_thresh in JBOD case.
1040 *
1041 * wb_thresh thresh - wb_thresh
1042 * span = --------- * (8 * write_bw) + ------------------ * wb_thresh
1043 * thresh thresh
1044 */
1045 span = (dtc->thresh - wb_thresh + 8 * write_bw) * (u64)x >> 16;
1046 x_intercept = wb_setpoint + span;
1047
1048 if (dtc->wb_dirty < x_intercept - span / 4) {
1049 pos_ratio = div64_u64(pos_ratio * (x_intercept - dtc->wb_dirty),
1050 (x_intercept - wb_setpoint) | 1);
1051 } else
1052 pos_ratio /= 4;
1053
1054 /*
1055 * wb reserve area, safeguard against dirty pool underrun and disk idle
1056 * It may push the desired control point of global dirty pages higher
1057 * than setpoint.
1058 */
1059 x_intercept = wb_thresh / 2;
1060 if (dtc->wb_dirty < x_intercept) {
1061 if (dtc->wb_dirty > x_intercept / 8)
1062 pos_ratio = div_u64(pos_ratio * x_intercept,
1063 dtc->wb_dirty);
1064 else
1065 pos_ratio *= 8;
1066 }
1067
1068 dtc->pos_ratio = pos_ratio;
1069}
1070
1071static void wb_update_write_bandwidth(struct bdi_writeback *wb,
1072 unsigned long elapsed,
1073 unsigned long written)
1074{
1075 const unsigned long period = roundup_pow_of_two(3 * HZ);
1076 unsigned long avg = wb->avg_write_bandwidth;
1077 unsigned long old = wb->write_bandwidth;
1078 u64 bw;
1079
1080 /*
1081 * bw = written * HZ / elapsed
1082 *
1083 * bw * elapsed + write_bandwidth * (period - elapsed)
1084 * write_bandwidth = ---------------------------------------------------
1085 * period
1086 *
1087 * @written may have decreased due to account_page_redirty().
1088 * Avoid underflowing @bw calculation.
1089 */
1090 bw = written - min(written, wb->written_stamp);
1091 bw *= HZ;
1092 if (unlikely(elapsed > period)) {
1093 bw = div64_ul(bw, elapsed);
1094 avg = bw;
1095 goto out;
1096 }
1097 bw += (u64)wb->write_bandwidth * (period - elapsed);
1098 bw >>= ilog2(period);
1099
1100 /*
1101 * one more level of smoothing, for filtering out sudden spikes
1102 */
1103 if (avg > old && old >= (unsigned long)bw)
1104 avg -= (avg - old) >> 3;
1105
1106 if (avg < old && old <= (unsigned long)bw)
1107 avg += (old - avg) >> 3;
1108
1109out:
1110 /* keep avg > 0 to guarantee that tot > 0 if there are dirty wbs */
1111 avg = max(avg, 1LU);
1112 if (wb_has_dirty_io(wb)) {
1113 long delta = avg - wb->avg_write_bandwidth;
1114 WARN_ON_ONCE(atomic_long_add_return(delta,
1115 &wb->bdi->tot_write_bandwidth) <= 0);
1116 }
1117 wb->write_bandwidth = bw;
1118 wb->avg_write_bandwidth = avg;
1119}
1120
1121static void update_dirty_limit(struct dirty_throttle_control *dtc)
1122{
1123 struct wb_domain *dom = dtc_dom(dtc);
1124 unsigned long thresh = dtc->thresh;
1125 unsigned long limit = dom->dirty_limit;
1126
1127 /*
1128 * Follow up in one step.
1129 */
1130 if (limit < thresh) {
1131 limit = thresh;
1132 goto update;
1133 }
1134
1135 /*
1136 * Follow down slowly. Use the higher one as the target, because thresh
1137 * may drop below dirty. This is exactly the reason to introduce
1138 * dom->dirty_limit which is guaranteed to lie above the dirty pages.
1139 */
1140 thresh = max(thresh, dtc->dirty);
1141 if (limit > thresh) {
1142 limit -= (limit - thresh) >> 5;
1143 goto update;
1144 }
1145 return;
1146update:
1147 dom->dirty_limit = limit;
1148}
1149
1150static void domain_update_bandwidth(struct dirty_throttle_control *dtc,
1151 unsigned long now)
1152{
1153 struct wb_domain *dom = dtc_dom(dtc);
1154
1155 /*
1156 * check locklessly first to optimize away locking for the most time
1157 */
1158 if (time_before(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL))
1159 return;
1160
1161 spin_lock(&dom->lock);
1162 if (time_after_eq(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL)) {
1163 update_dirty_limit(dtc);
1164 dom->dirty_limit_tstamp = now;
1165 }
1166 spin_unlock(&dom->lock);
1167}
1168
1169/*
1170 * Maintain wb->dirty_ratelimit, the base dirty throttle rate.
1171 *
1172 * Normal wb tasks will be curbed at or below it in long term.
1173 * Obviously it should be around (write_bw / N) when there are N dd tasks.
1174 */
1175static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc,
1176 unsigned long dirtied,
1177 unsigned long elapsed)
1178{
1179 struct bdi_writeback *wb = dtc->wb;
1180 unsigned long dirty = dtc->dirty;
1181 unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
1182 unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
1183 unsigned long setpoint = (freerun + limit) / 2;
1184 unsigned long write_bw = wb->avg_write_bandwidth;
1185 unsigned long dirty_ratelimit = wb->dirty_ratelimit;
1186 unsigned long dirty_rate;
1187 unsigned long task_ratelimit;
1188 unsigned long balanced_dirty_ratelimit;
1189 unsigned long step;
1190 unsigned long x;
1191 unsigned long shift;
1192
1193 /*
1194 * The dirty rate will match the writeout rate in long term, except
1195 * when dirty pages are truncated by userspace or re-dirtied by FS.
1196 */
1197 dirty_rate = (dirtied - wb->dirtied_stamp) * HZ / elapsed;
1198
1199 /*
1200 * task_ratelimit reflects each dd's dirty rate for the past 200ms.
1201 */
1202 task_ratelimit = (u64)dirty_ratelimit *
1203 dtc->pos_ratio >> RATELIMIT_CALC_SHIFT;
1204 task_ratelimit++; /* it helps rampup dirty_ratelimit from tiny values */
1205
1206 /*
1207 * A linear estimation of the "balanced" throttle rate. The theory is,
1208 * if there are N dd tasks, each throttled at task_ratelimit, the wb's
1209 * dirty_rate will be measured to be (N * task_ratelimit). So the below
1210 * formula will yield the balanced rate limit (write_bw / N).
1211 *
1212 * Note that the expanded form is not a pure rate feedback:
1213 * rate_(i+1) = rate_(i) * (write_bw / dirty_rate) (1)
1214 * but also takes pos_ratio into account:
1215 * rate_(i+1) = rate_(i) * (write_bw / dirty_rate) * pos_ratio (2)
1216 *
1217 * (1) is not realistic because pos_ratio also takes part in balancing
1218 * the dirty rate. Consider the state
1219 * pos_ratio = 0.5 (3)
1220 * rate = 2 * (write_bw / N) (4)
1221 * If (1) is used, it will stuck in that state! Because each dd will
1222 * be throttled at
1223 * task_ratelimit = pos_ratio * rate = (write_bw / N) (5)
1224 * yielding
1225 * dirty_rate = N * task_ratelimit = write_bw (6)
1226 * put (6) into (1) we get
1227 * rate_(i+1) = rate_(i) (7)
1228 *
1229 * So we end up using (2) to always keep
1230 * rate_(i+1) ~= (write_bw / N) (8)
1231 * regardless of the value of pos_ratio. As long as (8) is satisfied,
1232 * pos_ratio is able to drive itself to 1.0, which is not only where
1233 * the dirty count meet the setpoint, but also where the slope of
1234 * pos_ratio is most flat and hence task_ratelimit is least fluctuated.
1235 */
1236 balanced_dirty_ratelimit = div_u64((u64)task_ratelimit * write_bw,
1237 dirty_rate | 1);
1238 /*
1239 * balanced_dirty_ratelimit ~= (write_bw / N) <= write_bw
1240 */
1241 if (unlikely(balanced_dirty_ratelimit > write_bw))
1242 balanced_dirty_ratelimit = write_bw;
1243
1244 /*
1245 * We could safely do this and return immediately:
1246 *
1247 * wb->dirty_ratelimit = balanced_dirty_ratelimit;
1248 *
1249 * However to get a more stable dirty_ratelimit, the below elaborated
1250 * code makes use of task_ratelimit to filter out singular points and
1251 * limit the step size.
1252 *
1253 * The below code essentially only uses the relative value of
1254 *
1255 * task_ratelimit - dirty_ratelimit
1256 * = (pos_ratio - 1) * dirty_ratelimit
1257 *
1258 * which reflects the direction and size of dirty position error.
1259 */
1260
1261 /*
1262 * dirty_ratelimit will follow balanced_dirty_ratelimit iff
1263 * task_ratelimit is on the same side of dirty_ratelimit, too.
1264 * For example, when
1265 * - dirty_ratelimit > balanced_dirty_ratelimit
1266 * - dirty_ratelimit > task_ratelimit (dirty pages are above setpoint)
1267 * lowering dirty_ratelimit will help meet both the position and rate
1268 * control targets. Otherwise, don't update dirty_ratelimit if it will
1269 * only help meet the rate target. After all, what the users ultimately
1270 * feel and care are stable dirty rate and small position error.
1271 *
1272 * |task_ratelimit - dirty_ratelimit| is used to limit the step size
1273 * and filter out the singular points of balanced_dirty_ratelimit. Which
1274 * keeps jumping around randomly and can even leap far away at times
1275 * due to the small 200ms estimation period of dirty_rate (we want to
1276 * keep that period small to reduce time lags).
1277 */
1278 step = 0;
1279
1280 /*
1281 * For strictlimit case, calculations above were based on wb counters
1282 * and limits (starting from pos_ratio = wb_position_ratio() and up to
1283 * balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate).
1284 * Hence, to calculate "step" properly, we have to use wb_dirty as
1285 * "dirty" and wb_setpoint as "setpoint".
1286 *
1287 * We rampup dirty_ratelimit forcibly if wb_dirty is low because
1288 * it's possible that wb_thresh is close to zero due to inactivity
1289 * of backing device.
1290 */
1291 if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
1292 dirty = dtc->wb_dirty;
1293 if (dtc->wb_dirty < 8)
1294 setpoint = dtc->wb_dirty + 1;
1295 else
1296 setpoint = (dtc->wb_thresh + dtc->wb_bg_thresh) / 2;
1297 }
1298
1299 if (dirty < setpoint) {
1300 x = min3(wb->balanced_dirty_ratelimit,
1301 balanced_dirty_ratelimit, task_ratelimit);
1302 if (dirty_ratelimit < x)
1303 step = x - dirty_ratelimit;
1304 } else {
1305 x = max3(wb->balanced_dirty_ratelimit,
1306 balanced_dirty_ratelimit, task_ratelimit);
1307 if (dirty_ratelimit > x)
1308 step = dirty_ratelimit - x;
1309 }
1310
1311 /*
1312 * Don't pursue 100% rate matching. It's impossible since the balanced
1313 * rate itself is constantly fluctuating. So decrease the track speed
1314 * when it gets close to the target. Helps eliminate pointless tremors.
1315 */
1316 shift = dirty_ratelimit / (2 * step + 1);
1317 if (shift < BITS_PER_LONG)
1318 step = DIV_ROUND_UP(step >> shift, 8);
1319 else
1320 step = 0;
1321
1322 if (dirty_ratelimit < balanced_dirty_ratelimit)
1323 dirty_ratelimit += step;
1324 else
1325 dirty_ratelimit -= step;
1326
1327 wb->dirty_ratelimit = max(dirty_ratelimit, 1UL);
1328 wb->balanced_dirty_ratelimit = balanced_dirty_ratelimit;
1329
1330 trace_bdi_dirty_ratelimit(wb, dirty_rate, task_ratelimit);
1331}
1332
1333static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc,
1334 struct dirty_throttle_control *mdtc,
1335 unsigned long start_time,
1336 bool update_ratelimit)
1337{
1338 struct bdi_writeback *wb = gdtc->wb;
1339 unsigned long now = jiffies;
1340 unsigned long elapsed = now - wb->bw_time_stamp;
1341 unsigned long dirtied;
1342 unsigned long written;
1343
1344 lockdep_assert_held(&wb->list_lock);
1345
1346 /*
1347 * rate-limit, only update once every 200ms.
1348 */
1349 if (elapsed < BANDWIDTH_INTERVAL)
1350 return;
1351
1352 dirtied = percpu_counter_read(&wb->stat[WB_DIRTIED]);
1353 written = percpu_counter_read(&wb->stat[WB_WRITTEN]);
1354
1355 /*
1356 * Skip quiet periods when disk bandwidth is under-utilized.
1357 * (at least 1s idle time between two flusher runs)
1358 */
1359 if (elapsed > HZ && time_before(wb->bw_time_stamp, start_time))
1360 goto snapshot;
1361
1362 if (update_ratelimit) {
1363 domain_update_bandwidth(gdtc, now);
1364 wb_update_dirty_ratelimit(gdtc, dirtied, elapsed);
1365
1366 /*
1367 * @mdtc is always NULL if !CGROUP_WRITEBACK but the
1368 * compiler has no way to figure that out. Help it.
1369 */
1370 if (IS_ENABLED(CONFIG_CGROUP_WRITEBACK) && mdtc) {
1371 domain_update_bandwidth(mdtc, now);
1372 wb_update_dirty_ratelimit(mdtc, dirtied, elapsed);
1373 }
1374 }
1375 wb_update_write_bandwidth(wb, elapsed, written);
1376
1377snapshot:
1378 wb->dirtied_stamp = dirtied;
1379 wb->written_stamp = written;
1380 wb->bw_time_stamp = now;
1381}
1382
1383void wb_update_bandwidth(struct bdi_writeback *wb, unsigned long start_time)
1384{
1385 struct dirty_throttle_control gdtc = { GDTC_INIT(wb) };
1386
1387 __wb_update_bandwidth(&gdtc, NULL, start_time, false);
1388}
1389
1390/*
1391 * After a task dirtied this many pages, balance_dirty_pages_ratelimited()
1392 * will look to see if it needs to start dirty throttling.
1393 *
1394 * If dirty_poll_interval is too low, big NUMA machines will call the expensive
1395 * global_zone_page_state() too often. So scale it near-sqrt to the safety margin
1396 * (the number of pages we may dirty without exceeding the dirty limits).
1397 */
1398static unsigned long dirty_poll_interval(unsigned long dirty,
1399 unsigned long thresh)
1400{
1401 if (thresh > dirty)
1402 return 1UL << (ilog2(thresh - dirty) >> 1);
1403
1404 return 1;
1405}
1406
1407static unsigned long wb_max_pause(struct bdi_writeback *wb,
1408 unsigned long wb_dirty)
1409{
1410 unsigned long bw = wb->avg_write_bandwidth;
1411 unsigned long t;
1412
1413 /*
1414 * Limit pause time for small memory systems. If sleeping for too long
1415 * time, a small pool of dirty/writeback pages may go empty and disk go
1416 * idle.
1417 *
1418 * 8 serves as the safety ratio.
1419 */
1420 t = wb_dirty / (1 + bw / roundup_pow_of_two(1 + HZ / 8));
1421 t++;
1422
1423 return min_t(unsigned long, t, MAX_PAUSE);
1424}
1425
1426static long wb_min_pause(struct bdi_writeback *wb,
1427 long max_pause,
1428 unsigned long task_ratelimit,
1429 unsigned long dirty_ratelimit,
1430 int *nr_dirtied_pause)
1431{
1432 long hi = ilog2(wb->avg_write_bandwidth);
1433 long lo = ilog2(wb->dirty_ratelimit);
1434 long t; /* target pause */
1435 long pause; /* estimated next pause */
1436 int pages; /* target nr_dirtied_pause */
1437
1438 /* target for 10ms pause on 1-dd case */
1439 t = max(1, HZ / 100);
1440
1441 /*
1442 * Scale up pause time for concurrent dirtiers in order to reduce CPU
1443 * overheads.
1444 *
1445 * (N * 10ms) on 2^N concurrent tasks.
1446 */
1447 if (hi > lo)
1448 t += (hi - lo) * (10 * HZ) / 1024;
1449
1450 /*
1451 * This is a bit convoluted. We try to base the next nr_dirtied_pause
1452 * on the much more stable dirty_ratelimit. However the next pause time
1453 * will be computed based on task_ratelimit and the two rate limits may
1454 * depart considerably at some time. Especially if task_ratelimit goes
1455 * below dirty_ratelimit/2 and the target pause is max_pause, the next
1456 * pause time will be max_pause*2 _trimmed down_ to max_pause. As a
1457 * result task_ratelimit won't be executed faithfully, which could
1458 * eventually bring down dirty_ratelimit.
1459 *
1460 * We apply two rules to fix it up:
1461 * 1) try to estimate the next pause time and if necessary, use a lower
1462 * nr_dirtied_pause so as not to exceed max_pause. When this happens,
1463 * nr_dirtied_pause will be "dancing" with task_ratelimit.
1464 * 2) limit the target pause time to max_pause/2, so that the normal
1465 * small fluctuations of task_ratelimit won't trigger rule (1) and
1466 * nr_dirtied_pause will remain as stable as dirty_ratelimit.
1467 */
1468 t = min(t, 1 + max_pause / 2);
1469 pages = dirty_ratelimit * t / roundup_pow_of_two(HZ);
1470
1471 /*
1472 * Tiny nr_dirtied_pause is found to hurt I/O performance in the test
1473 * case fio-mmap-randwrite-64k, which does 16*{sync read, async write}.
1474 * When the 16 consecutive reads are often interrupted by some dirty
1475 * throttling pause during the async writes, cfq will go into idles
1476 * (deadline is fine). So push nr_dirtied_pause as high as possible
1477 * until reaches DIRTY_POLL_THRESH=32 pages.
1478 */
1479 if (pages < DIRTY_POLL_THRESH) {
1480 t = max_pause;
1481 pages = dirty_ratelimit * t / roundup_pow_of_two(HZ);
1482 if (pages > DIRTY_POLL_THRESH) {
1483 pages = DIRTY_POLL_THRESH;
1484 t = HZ * DIRTY_POLL_THRESH / dirty_ratelimit;
1485 }
1486 }
1487
1488 pause = HZ * pages / (task_ratelimit + 1);
1489 if (pause > max_pause) {
1490 t = max_pause;
1491 pages = task_ratelimit * t / roundup_pow_of_two(HZ);
1492 }
1493
1494 *nr_dirtied_pause = pages;
1495 /*
1496 * The minimal pause time will normally be half the target pause time.
1497 */
1498 return pages >= DIRTY_POLL_THRESH ? 1 + t / 2 : t;
1499}
1500
1501static inline void wb_dirty_limits(struct dirty_throttle_control *dtc)
1502{
1503 struct bdi_writeback *wb = dtc->wb;
1504 unsigned long wb_reclaimable;
1505
1506 /*
1507 * wb_thresh is not treated as some limiting factor as
1508 * dirty_thresh, due to reasons
1509 * - in JBOD setup, wb_thresh can fluctuate a lot
1510 * - in a system with HDD and USB key, the USB key may somehow
1511 * go into state (wb_dirty >> wb_thresh) either because
1512 * wb_dirty starts high, or because wb_thresh drops low.
1513 * In this case we don't want to hard throttle the USB key
1514 * dirtiers for 100 seconds until wb_dirty drops under
1515 * wb_thresh. Instead the auxiliary wb control line in
1516 * wb_position_ratio() will let the dirtier task progress
1517 * at some rate <= (write_bw / 2) for bringing down wb_dirty.
1518 */
1519 dtc->wb_thresh = __wb_calc_thresh(dtc);
1520 dtc->wb_bg_thresh = dtc->thresh ?
1521 div_u64((u64)dtc->wb_thresh * dtc->bg_thresh, dtc->thresh) : 0;
1522
1523 /*
1524 * In order to avoid the stacked BDI deadlock we need
1525 * to ensure we accurately count the 'dirty' pages when
1526 * the threshold is low.
1527 *
1528 * Otherwise it would be possible to get thresh+n pages
1529 * reported dirty, even though there are thresh-m pages
1530 * actually dirty; with m+n sitting in the percpu
1531 * deltas.
1532 */
1533 if (dtc->wb_thresh < 2 * wb_stat_error()) {
1534 wb_reclaimable = wb_stat_sum(wb, WB_RECLAIMABLE);
1535 dtc->wb_dirty = wb_reclaimable + wb_stat_sum(wb, WB_WRITEBACK);
1536 } else {
1537 wb_reclaimable = wb_stat(wb, WB_RECLAIMABLE);
1538 dtc->wb_dirty = wb_reclaimable + wb_stat(wb, WB_WRITEBACK);
1539 }
1540}
1541
1542/*
1543 * balance_dirty_pages() must be called by processes which are generating dirty
1544 * data. It looks at the number of dirty pages in the machine and will force
1545 * the caller to wait once crossing the (background_thresh + dirty_thresh) / 2.
1546 * If we're over `background_thresh' then the writeback threads are woken to
1547 * perform some writeout.
1548 */
1549static void balance_dirty_pages(struct bdi_writeback *wb,
1550 unsigned long pages_dirtied)
1551{
1552 struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) };
1553 struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) };
1554 struct dirty_throttle_control * const gdtc = &gdtc_stor;
1555 struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ?
1556 &mdtc_stor : NULL;
1557 struct dirty_throttle_control *sdtc;
1558 unsigned long nr_reclaimable; /* = file_dirty */
1559 long period;
1560 long pause;
1561 long max_pause;
1562 long min_pause;
1563 int nr_dirtied_pause;
1564 bool dirty_exceeded = false;
1565 unsigned long task_ratelimit;
1566 unsigned long dirty_ratelimit;
1567 struct backing_dev_info *bdi = wb->bdi;
1568 bool strictlimit = bdi->capabilities & BDI_CAP_STRICTLIMIT;
1569 unsigned long start_time = jiffies;
1570
1571 for (;;) {
1572 unsigned long now = jiffies;
1573 unsigned long dirty, thresh, bg_thresh;
1574 unsigned long m_dirty = 0; /* stop bogus uninit warnings */
1575 unsigned long m_thresh = 0;
1576 unsigned long m_bg_thresh = 0;
1577
1578 nr_reclaimable = global_node_page_state(NR_FILE_DIRTY);
1579 gdtc->avail = global_dirtyable_memory();
1580 gdtc->dirty = nr_reclaimable + global_node_page_state(NR_WRITEBACK);
1581
1582 domain_dirty_limits(gdtc);
1583
1584 if (unlikely(strictlimit)) {
1585 wb_dirty_limits(gdtc);
1586
1587 dirty = gdtc->wb_dirty;
1588 thresh = gdtc->wb_thresh;
1589 bg_thresh = gdtc->wb_bg_thresh;
1590 } else {
1591 dirty = gdtc->dirty;
1592 thresh = gdtc->thresh;
1593 bg_thresh = gdtc->bg_thresh;
1594 }
1595
1596 if (mdtc) {
1597 unsigned long filepages, headroom, writeback;
1598
1599 /*
1600 * If @wb belongs to !root memcg, repeat the same
1601 * basic calculations for the memcg domain.
1602 */
1603 mem_cgroup_wb_stats(wb, &filepages, &headroom,
1604 &mdtc->dirty, &writeback);
1605 mdtc->dirty += writeback;
1606 mdtc_calc_avail(mdtc, filepages, headroom);
1607
1608 domain_dirty_limits(mdtc);
1609
1610 if (unlikely(strictlimit)) {
1611 wb_dirty_limits(mdtc);
1612 m_dirty = mdtc->wb_dirty;
1613 m_thresh = mdtc->wb_thresh;
1614 m_bg_thresh = mdtc->wb_bg_thresh;
1615 } else {
1616 m_dirty = mdtc->dirty;
1617 m_thresh = mdtc->thresh;
1618 m_bg_thresh = mdtc->bg_thresh;
1619 }
1620 }
1621
1622 /*
1623 * Throttle it only when the background writeback cannot
1624 * catch-up. This avoids (excessively) small writeouts
1625 * when the wb limits are ramping up in case of !strictlimit.
1626 *
1627 * In strictlimit case make decision based on the wb counters
1628 * and limits. Small writeouts when the wb limits are ramping
1629 * up are the price we consciously pay for strictlimit-ing.
1630 *
1631 * If memcg domain is in effect, @dirty should be under
1632 * both global and memcg freerun ceilings.
1633 */
1634 if (dirty <= dirty_freerun_ceiling(thresh, bg_thresh) &&
1635 (!mdtc ||
1636 m_dirty <= dirty_freerun_ceiling(m_thresh, m_bg_thresh))) {
1637 unsigned long intv;
1638 unsigned long m_intv;
1639
1640free_running:
1641 intv = dirty_poll_interval(dirty, thresh);
1642 m_intv = ULONG_MAX;
1643
1644 current->dirty_paused_when = now;
1645 current->nr_dirtied = 0;
1646 if (mdtc)
1647 m_intv = dirty_poll_interval(m_dirty, m_thresh);
1648 current->nr_dirtied_pause = min(intv, m_intv);
1649 break;
1650 }
1651
1652 if (unlikely(!writeback_in_progress(wb)))
1653 wb_start_background_writeback(wb);
1654
1655 mem_cgroup_flush_foreign(wb);
1656
1657 /*
1658 * Calculate global domain's pos_ratio and select the
1659 * global dtc by default.
1660 */
1661 if (!strictlimit) {
1662 wb_dirty_limits(gdtc);
1663
1664 if ((current->flags & PF_LOCAL_THROTTLE) &&
1665 gdtc->wb_dirty <
1666 dirty_freerun_ceiling(gdtc->wb_thresh,
1667 gdtc->wb_bg_thresh))
1668 /*
1669 * LOCAL_THROTTLE tasks must not be throttled
1670 * when below the per-wb freerun ceiling.
1671 */
1672 goto free_running;
1673 }
1674
1675 dirty_exceeded = (gdtc->wb_dirty > gdtc->wb_thresh) &&
1676 ((gdtc->dirty > gdtc->thresh) || strictlimit);
1677
1678 wb_position_ratio(gdtc);
1679 sdtc = gdtc;
1680
1681 if (mdtc) {
1682 /*
1683 * If memcg domain is in effect, calculate its
1684 * pos_ratio. @wb should satisfy constraints from
1685 * both global and memcg domains. Choose the one
1686 * w/ lower pos_ratio.
1687 */
1688 if (!strictlimit) {
1689 wb_dirty_limits(mdtc);
1690
1691 if ((current->flags & PF_LOCAL_THROTTLE) &&
1692 mdtc->wb_dirty <
1693 dirty_freerun_ceiling(mdtc->wb_thresh,
1694 mdtc->wb_bg_thresh))
1695 /*
1696 * LOCAL_THROTTLE tasks must not be
1697 * throttled when below the per-wb
1698 * freerun ceiling.
1699 */
1700 goto free_running;
1701 }
1702 dirty_exceeded |= (mdtc->wb_dirty > mdtc->wb_thresh) &&
1703 ((mdtc->dirty > mdtc->thresh) || strictlimit);
1704
1705 wb_position_ratio(mdtc);
1706 if (mdtc->pos_ratio < gdtc->pos_ratio)
1707 sdtc = mdtc;
1708 }
1709
1710 if (dirty_exceeded && !wb->dirty_exceeded)
1711 wb->dirty_exceeded = 1;
1712
1713 if (time_is_before_jiffies(wb->bw_time_stamp +
1714 BANDWIDTH_INTERVAL)) {
1715 spin_lock(&wb->list_lock);
1716 __wb_update_bandwidth(gdtc, mdtc, start_time, true);
1717 spin_unlock(&wb->list_lock);
1718 }
1719
1720 /* throttle according to the chosen dtc */
1721 dirty_ratelimit = wb->dirty_ratelimit;
1722 task_ratelimit = ((u64)dirty_ratelimit * sdtc->pos_ratio) >>
1723 RATELIMIT_CALC_SHIFT;
1724 max_pause = wb_max_pause(wb, sdtc->wb_dirty);
1725 min_pause = wb_min_pause(wb, max_pause,
1726 task_ratelimit, dirty_ratelimit,
1727 &nr_dirtied_pause);
1728
1729 if (unlikely(task_ratelimit == 0)) {
1730 period = max_pause;
1731 pause = max_pause;
1732 goto pause;
1733 }
1734 period = HZ * pages_dirtied / task_ratelimit;
1735 pause = period;
1736 if (current->dirty_paused_when)
1737 pause -= now - current->dirty_paused_when;
1738 /*
1739 * For less than 1s think time (ext3/4 may block the dirtier
1740 * for up to 800ms from time to time on 1-HDD; so does xfs,
1741 * however at much less frequency), try to compensate it in
1742 * future periods by updating the virtual time; otherwise just
1743 * do a reset, as it may be a light dirtier.
1744 */
1745 if (pause < min_pause) {
1746 trace_balance_dirty_pages(wb,
1747 sdtc->thresh,
1748 sdtc->bg_thresh,
1749 sdtc->dirty,
1750 sdtc->wb_thresh,
1751 sdtc->wb_dirty,
1752 dirty_ratelimit,
1753 task_ratelimit,
1754 pages_dirtied,
1755 period,
1756 min(pause, 0L),
1757 start_time);
1758 if (pause < -HZ) {
1759 current->dirty_paused_when = now;
1760 current->nr_dirtied = 0;
1761 } else if (period) {
1762 current->dirty_paused_when += period;
1763 current->nr_dirtied = 0;
1764 } else if (current->nr_dirtied_pause <= pages_dirtied)
1765 current->nr_dirtied_pause += pages_dirtied;
1766 break;
1767 }
1768 if (unlikely(pause > max_pause)) {
1769 /* for occasional dropped task_ratelimit */
1770 now += min(pause - max_pause, max_pause);
1771 pause = max_pause;
1772 }
1773
1774pause:
1775 trace_balance_dirty_pages(wb,
1776 sdtc->thresh,
1777 sdtc->bg_thresh,
1778 sdtc->dirty,
1779 sdtc->wb_thresh,
1780 sdtc->wb_dirty,
1781 dirty_ratelimit,
1782 task_ratelimit,
1783 pages_dirtied,
1784 period,
1785 pause,
1786 start_time);
1787 __set_current_state(TASK_KILLABLE);
1788 wb->dirty_sleep = now;
1789 io_schedule_timeout(pause);
1790
1791 current->dirty_paused_when = now + pause;
1792 current->nr_dirtied = 0;
1793 current->nr_dirtied_pause = nr_dirtied_pause;
1794
1795 /*
1796 * This is typically equal to (dirty < thresh) and can also
1797 * keep "1000+ dd on a slow USB stick" under control.
1798 */
1799 if (task_ratelimit)
1800 break;
1801
1802 /*
1803 * In the case of an unresponsive NFS server and the NFS dirty
1804 * pages exceeds dirty_thresh, give the other good wb's a pipe
1805 * to go through, so that tasks on them still remain responsive.
1806 *
1807 * In theory 1 page is enough to keep the consumer-producer
1808 * pipe going: the flusher cleans 1 page => the task dirties 1
1809 * more page. However wb_dirty has accounting errors. So use
1810 * the larger and more IO friendly wb_stat_error.
1811 */
1812 if (sdtc->wb_dirty <= wb_stat_error())
1813 break;
1814
1815 if (fatal_signal_pending(current))
1816 break;
1817 }
1818
1819 if (!dirty_exceeded && wb->dirty_exceeded)
1820 wb->dirty_exceeded = 0;
1821
1822 if (writeback_in_progress(wb))
1823 return;
1824
1825 /*
1826 * In laptop mode, we wait until hitting the higher threshold before
1827 * starting background writeout, and then write out all the way down
1828 * to the lower threshold. So slow writers cause minimal disk activity.
1829 *
1830 * In normal mode, we start background writeout at the lower
1831 * background_thresh, to keep the amount of dirty memory low.
1832 */
1833 if (laptop_mode)
1834 return;
1835
1836 if (nr_reclaimable > gdtc->bg_thresh)
1837 wb_start_background_writeback(wb);
1838}
1839
1840static DEFINE_PER_CPU(int, bdp_ratelimits);
1841
1842/*
1843 * Normal tasks are throttled by
1844 * loop {
1845 * dirty tsk->nr_dirtied_pause pages;
1846 * take a snap in balance_dirty_pages();
1847 * }
1848 * However there is a worst case. If every task exit immediately when dirtied
1849 * (tsk->nr_dirtied_pause - 1) pages, balance_dirty_pages() will never be
1850 * called to throttle the page dirties. The solution is to save the not yet
1851 * throttled page dirties in dirty_throttle_leaks on task exit and charge them
1852 * randomly into the running tasks. This works well for the above worst case,
1853 * as the new task will pick up and accumulate the old task's leaked dirty
1854 * count and eventually get throttled.
1855 */
1856DEFINE_PER_CPU(int, dirty_throttle_leaks) = 0;
1857
1858/**
1859 * balance_dirty_pages_ratelimited - balance dirty memory state
1860 * @mapping: address_space which was dirtied
1861 *
1862 * Processes which are dirtying memory should call in here once for each page
1863 * which was newly dirtied. The function will periodically check the system's
1864 * dirty state and will initiate writeback if needed.
1865 *
1866 * Once we're over the dirty memory limit we decrease the ratelimiting
1867 * by a lot, to prevent individual processes from overshooting the limit
1868 * by (ratelimit_pages) each.
1869 */
1870void balance_dirty_pages_ratelimited(struct address_space *mapping)
1871{
1872 struct inode *inode = mapping->host;
1873 struct backing_dev_info *bdi = inode_to_bdi(inode);
1874 struct bdi_writeback *wb = NULL;
1875 int ratelimit;
1876 int *p;
1877
1878 if (!(bdi->capabilities & BDI_CAP_WRITEBACK))
1879 return;
1880
1881 if (inode_cgwb_enabled(inode))
1882 wb = wb_get_create_current(bdi, GFP_KERNEL);
1883 if (!wb)
1884 wb = &bdi->wb;
1885
1886 ratelimit = current->nr_dirtied_pause;
1887 if (wb->dirty_exceeded)
1888 ratelimit = min(ratelimit, 32 >> (PAGE_SHIFT - 10));
1889
1890 preempt_disable();
1891 /*
1892 * This prevents one CPU to accumulate too many dirtied pages without
1893 * calling into balance_dirty_pages(), which can happen when there are
1894 * 1000+ tasks, all of them start dirtying pages at exactly the same
1895 * time, hence all honoured too large initial task->nr_dirtied_pause.
1896 */
1897 p = this_cpu_ptr(&bdp_ratelimits);
1898 if (unlikely(current->nr_dirtied >= ratelimit))
1899 *p = 0;
1900 else if (unlikely(*p >= ratelimit_pages)) {
1901 *p = 0;
1902 ratelimit = 0;
1903 }
1904 /*
1905 * Pick up the dirtied pages by the exited tasks. This avoids lots of
1906 * short-lived tasks (eg. gcc invocations in a kernel build) escaping
1907 * the dirty throttling and livelock other long-run dirtiers.
1908 */
1909 p = this_cpu_ptr(&dirty_throttle_leaks);
1910 if (*p > 0 && current->nr_dirtied < ratelimit) {
1911 unsigned long nr_pages_dirtied;
1912 nr_pages_dirtied = min(*p, ratelimit - current->nr_dirtied);
1913 *p -= nr_pages_dirtied;
1914 current->nr_dirtied += nr_pages_dirtied;
1915 }
1916 preempt_enable();
1917
1918 if (unlikely(current->nr_dirtied >= ratelimit))
1919 balance_dirty_pages(wb, current->nr_dirtied);
1920
1921 wb_put(wb);
1922}
1923EXPORT_SYMBOL(balance_dirty_pages_ratelimited);
1924
1925/**
1926 * wb_over_bg_thresh - does @wb need to be written back?
1927 * @wb: bdi_writeback of interest
1928 *
1929 * Determines whether background writeback should keep writing @wb or it's
1930 * clean enough.
1931 *
1932 * Return: %true if writeback should continue.
1933 */
1934bool wb_over_bg_thresh(struct bdi_writeback *wb)
1935{
1936 struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) };
1937 struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) };
1938 struct dirty_throttle_control * const gdtc = &gdtc_stor;
1939 struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ?
1940 &mdtc_stor : NULL;
1941 unsigned long reclaimable;
1942 unsigned long thresh;
1943
1944 /*
1945 * Similar to balance_dirty_pages() but ignores pages being written
1946 * as we're trying to decide whether to put more under writeback.
1947 */
1948 gdtc->avail = global_dirtyable_memory();
1949 gdtc->dirty = global_node_page_state(NR_FILE_DIRTY);
1950 domain_dirty_limits(gdtc);
1951
1952 if (gdtc->dirty > gdtc->bg_thresh)
1953 return true;
1954
1955 thresh = wb_calc_thresh(gdtc->wb, gdtc->bg_thresh);
1956 if (thresh < 2 * wb_stat_error())
1957 reclaimable = wb_stat_sum(wb, WB_RECLAIMABLE);
1958 else
1959 reclaimable = wb_stat(wb, WB_RECLAIMABLE);
1960
1961 if (reclaimable > thresh)
1962 return true;
1963
1964 if (mdtc) {
1965 unsigned long filepages, headroom, writeback;
1966
1967 mem_cgroup_wb_stats(wb, &filepages, &headroom, &mdtc->dirty,
1968 &writeback);
1969 mdtc_calc_avail(mdtc, filepages, headroom);
1970 domain_dirty_limits(mdtc); /* ditto, ignore writeback */
1971
1972 if (mdtc->dirty > mdtc->bg_thresh)
1973 return true;
1974
1975 thresh = wb_calc_thresh(mdtc->wb, mdtc->bg_thresh);
1976 if (thresh < 2 * wb_stat_error())
1977 reclaimable = wb_stat_sum(wb, WB_RECLAIMABLE);
1978 else
1979 reclaimable = wb_stat(wb, WB_RECLAIMABLE);
1980
1981 if (reclaimable > thresh)
1982 return true;
1983 }
1984
1985 return false;
1986}
1987
1988/*
1989 * sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
1990 */
1991int dirty_writeback_centisecs_handler(struct ctl_table *table, int write,
1992 void *buffer, size_t *length, loff_t *ppos)
1993{
1994 unsigned int old_interval = dirty_writeback_interval;
1995 int ret;
1996
1997 ret = proc_dointvec(table, write, buffer, length, ppos);
1998
1999 /*
2000 * Writing 0 to dirty_writeback_interval will disable periodic writeback
2001 * and a different non-zero value will wakeup the writeback threads.
2002 * wb_wakeup_delayed() would be more appropriate, but it's a pain to
2003 * iterate over all bdis and wbs.
2004 * The reason we do this is to make the change take effect immediately.
2005 */
2006 if (!ret && write && dirty_writeback_interval &&
2007 dirty_writeback_interval != old_interval)
2008 wakeup_flusher_threads(WB_REASON_PERIODIC);
2009
2010 return ret;
2011}
2012
2013#ifdef CONFIG_BLOCK
2014void laptop_mode_timer_fn(struct timer_list *t)
2015{
2016 struct backing_dev_info *backing_dev_info =
2017 from_timer(backing_dev_info, t, laptop_mode_wb_timer);
2018
2019 wakeup_flusher_threads_bdi(backing_dev_info, WB_REASON_LAPTOP_TIMER);
2020}
2021
2022/*
2023 * We've spun up the disk and we're in laptop mode: schedule writeback
2024 * of all dirty data a few seconds from now. If the flush is already scheduled
2025 * then push it back - the user is still using the disk.
2026 */
2027void laptop_io_completion(struct backing_dev_info *info)
2028{
2029 mod_timer(&info->laptop_mode_wb_timer, jiffies + laptop_mode);
2030}
2031
2032/*
2033 * We're in laptop mode and we've just synced. The sync's writes will have
2034 * caused another writeback to be scheduled by laptop_io_completion.
2035 * Nothing needs to be written back anymore, so we unschedule the writeback.
2036 */
2037void laptop_sync_completion(void)
2038{
2039 struct backing_dev_info *bdi;
2040
2041 rcu_read_lock();
2042
2043 list_for_each_entry_rcu(bdi, &bdi_list, bdi_list)
2044 del_timer(&bdi->laptop_mode_wb_timer);
2045
2046 rcu_read_unlock();
2047}
2048#endif
2049
2050/*
2051 * If ratelimit_pages is too high then we can get into dirty-data overload
2052 * if a large number of processes all perform writes at the same time.
2053 *
2054 * Here we set ratelimit_pages to a level which ensures that when all CPUs are
2055 * dirtying in parallel, we cannot go more than 3% (1/32) over the dirty memory
2056 * thresholds.
2057 */
2058
2059void writeback_set_ratelimit(void)
2060{
2061 struct wb_domain *dom = &global_wb_domain;
2062 unsigned long background_thresh;
2063 unsigned long dirty_thresh;
2064
2065 global_dirty_limits(&background_thresh, &dirty_thresh);
2066 dom->dirty_limit = dirty_thresh;
2067 ratelimit_pages = dirty_thresh / (num_online_cpus() * 32);
2068 if (ratelimit_pages < 16)
2069 ratelimit_pages = 16;
2070}
2071
2072static int page_writeback_cpu_online(unsigned int cpu)
2073{
2074 writeback_set_ratelimit();
2075 return 0;
2076}
2077
2078/*
2079 * Called early on to tune the page writeback dirty limits.
2080 *
2081 * We used to scale dirty pages according to how total memory
2082 * related to pages that could be allocated for buffers.
2083 *
2084 * However, that was when we used "dirty_ratio" to scale with
2085 * all memory, and we don't do that any more. "dirty_ratio"
2086 * is now applied to total non-HIGHPAGE memory, and as such we can't
2087 * get into the old insane situation any more where we had
2088 * large amounts of dirty pages compared to a small amount of
2089 * non-HIGHMEM memory.
2090 *
2091 * But we might still want to scale the dirty_ratio by how
2092 * much memory the box has..
2093 */
2094void __init page_writeback_init(void)
2095{
2096 BUG_ON(wb_domain_init(&global_wb_domain, GFP_KERNEL));
2097
2098 cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "mm/writeback:online",
2099 page_writeback_cpu_online, NULL);
2100 cpuhp_setup_state(CPUHP_MM_WRITEBACK_DEAD, "mm/writeback:dead", NULL,
2101 page_writeback_cpu_online);
2102}
2103
2104/**
2105 * tag_pages_for_writeback - tag pages to be written by write_cache_pages
2106 * @mapping: address space structure to write
2107 * @start: starting page index
2108 * @end: ending page index (inclusive)
2109 *
2110 * This function scans the page range from @start to @end (inclusive) and tags
2111 * all pages that have DIRTY tag set with a special TOWRITE tag. The idea is
2112 * that write_cache_pages (or whoever calls this function) will then use
2113 * TOWRITE tag to identify pages eligible for writeback. This mechanism is
2114 * used to avoid livelocking of writeback by a process steadily creating new
2115 * dirty pages in the file (thus it is important for this function to be quick
2116 * so that it can tag pages faster than a dirtying process can create them).
2117 */
2118void tag_pages_for_writeback(struct address_space *mapping,
2119 pgoff_t start, pgoff_t end)
2120{
2121 XA_STATE(xas, &mapping->i_pages, start);
2122 unsigned int tagged = 0;
2123 void *page;
2124
2125 xas_lock_irq(&xas);
2126 xas_for_each_marked(&xas, page, end, PAGECACHE_TAG_DIRTY) {
2127 xas_set_mark(&xas, PAGECACHE_TAG_TOWRITE);
2128 if (++tagged % XA_CHECK_SCHED)
2129 continue;
2130
2131 xas_pause(&xas);
2132 xas_unlock_irq(&xas);
2133 cond_resched();
2134 xas_lock_irq(&xas);
2135 }
2136 xas_unlock_irq(&xas);
2137}
2138EXPORT_SYMBOL(tag_pages_for_writeback);
2139
2140/**
2141 * write_cache_pages - walk the list of dirty pages of the given address space and write all of them.
2142 * @mapping: address space structure to write
2143 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
2144 * @writepage: function called for each page
2145 * @data: data passed to writepage function
2146 *
2147 * If a page is already under I/O, write_cache_pages() skips it, even
2148 * if it's dirty. This is desirable behaviour for memory-cleaning writeback,
2149 * but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
2150 * and msync() need to guarantee that all the data which was dirty at the time
2151 * the call was made get new I/O started against them. If wbc->sync_mode is
2152 * WB_SYNC_ALL then we were called for data integrity and we must wait for
2153 * existing IO to complete.
2154 *
2155 * To avoid livelocks (when other process dirties new pages), we first tag
2156 * pages which should be written back with TOWRITE tag and only then start
2157 * writing them. For data-integrity sync we have to be careful so that we do
2158 * not miss some pages (e.g., because some other process has cleared TOWRITE
2159 * tag we set). The rule we follow is that TOWRITE tag can be cleared only
2160 * by the process clearing the DIRTY tag (and submitting the page for IO).
2161 *
2162 * To avoid deadlocks between range_cyclic writeback and callers that hold
2163 * pages in PageWriteback to aggregate IO until write_cache_pages() returns,
2164 * we do not loop back to the start of the file. Doing so causes a page
2165 * lock/page writeback access order inversion - we should only ever lock
2166 * multiple pages in ascending page->index order, and looping back to the start
2167 * of the file violates that rule and causes deadlocks.
2168 *
2169 * Return: %0 on success, negative error code otherwise
2170 */
2171int write_cache_pages(struct address_space *mapping,
2172 struct writeback_control *wbc, writepage_t writepage,
2173 void *data)
2174{
2175 int ret = 0;
2176 int done = 0;
2177 int error;
2178 struct pagevec pvec;
2179 int nr_pages;
2180 pgoff_t index;
2181 pgoff_t end; /* Inclusive */
2182 pgoff_t done_index;
2183 int range_whole = 0;
2184 xa_mark_t tag;
2185
2186 pagevec_init(&pvec);
2187 if (wbc->range_cyclic) {
2188 index = mapping->writeback_index; /* prev offset */
2189 end = -1;
2190 } else {
2191 index = wbc->range_start >> PAGE_SHIFT;
2192 end = wbc->range_end >> PAGE_SHIFT;
2193 if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
2194 range_whole = 1;
2195 }
2196 if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages) {
2197 tag_pages_for_writeback(mapping, index, end);
2198 tag = PAGECACHE_TAG_TOWRITE;
2199 } else {
2200 tag = PAGECACHE_TAG_DIRTY;
2201 }
2202 done_index = index;
2203 while (!done && (index <= end)) {
2204 int i;
2205
2206 nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end,
2207 tag);
2208 if (nr_pages == 0)
2209 break;
2210
2211 for (i = 0; i < nr_pages; i++) {
2212 struct page *page = pvec.pages[i];
2213
2214 done_index = page->index;
2215
2216 lock_page(page);
2217
2218 /*
2219 * Page truncated or invalidated. We can freely skip it
2220 * then, even for data integrity operations: the page
2221 * has disappeared concurrently, so there could be no
2222 * real expectation of this data integrity operation
2223 * even if there is now a new, dirty page at the same
2224 * pagecache address.
2225 */
2226 if (unlikely(page->mapping != mapping)) {
2227continue_unlock:
2228 unlock_page(page);
2229 continue;
2230 }
2231
2232 if (!PageDirty(page)) {
2233 /* someone wrote it for us */
2234 goto continue_unlock;
2235 }
2236
2237 if (PageWriteback(page)) {
2238 if (wbc->sync_mode != WB_SYNC_NONE)
2239 wait_on_page_writeback(page);
2240 else
2241 goto continue_unlock;
2242 }
2243
2244 BUG_ON(PageWriteback(page));
2245 if (!clear_page_dirty_for_io(page))
2246 goto continue_unlock;
2247
2248 trace_wbc_writepage(wbc, inode_to_bdi(mapping->host));
2249 error = (*writepage)(page, wbc, data);
2250 if (unlikely(error)) {
2251 /*
2252 * Handle errors according to the type of
2253 * writeback. There's no need to continue for
2254 * background writeback. Just push done_index
2255 * past this page so media errors won't choke
2256 * writeout for the entire file. For integrity
2257 * writeback, we must process the entire dirty
2258 * set regardless of errors because the fs may
2259 * still have state to clear for each page. In
2260 * that case we continue processing and return
2261 * the first error.
2262 */
2263 if (error == AOP_WRITEPAGE_ACTIVATE) {
2264 unlock_page(page);
2265 error = 0;
2266 } else if (wbc->sync_mode != WB_SYNC_ALL) {
2267 ret = error;
2268 done_index = page->index + 1;
2269 done = 1;
2270 break;
2271 }
2272 if (!ret)
2273 ret = error;
2274 }
2275
2276 /*
2277 * We stop writing back only if we are not doing
2278 * integrity sync. In case of integrity sync we have to
2279 * keep going until we have written all the pages
2280 * we tagged for writeback prior to entering this loop.
2281 */
2282 if (--wbc->nr_to_write <= 0 &&
2283 wbc->sync_mode == WB_SYNC_NONE) {
2284 done = 1;
2285 break;
2286 }
2287 }
2288 pagevec_release(&pvec);
2289 cond_resched();
2290 }
2291
2292 /*
2293 * If we hit the last page and there is more work to be done: wrap
2294 * back the index back to the start of the file for the next
2295 * time we are called.
2296 */
2297 if (wbc->range_cyclic && !done)
2298 done_index = 0;
2299 if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
2300 mapping->writeback_index = done_index;
2301
2302 return ret;
2303}
2304EXPORT_SYMBOL(write_cache_pages);
2305
2306/*
2307 * Function used by generic_writepages to call the real writepage
2308 * function and set the mapping flags on error
2309 */
2310static int __writepage(struct page *page, struct writeback_control *wbc,
2311 void *data)
2312{
2313 struct address_space *mapping = data;
2314 int ret = mapping->a_ops->writepage(page, wbc);
2315 mapping_set_error(mapping, ret);
2316 return ret;
2317}
2318
2319/**
2320 * generic_writepages - walk the list of dirty pages of the given address space and writepage() all of them.
2321 * @mapping: address space structure to write
2322 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
2323 *
2324 * This is a library function, which implements the writepages()
2325 * address_space_operation.
2326 *
2327 * Return: %0 on success, negative error code otherwise
2328 */
2329int generic_writepages(struct address_space *mapping,
2330 struct writeback_control *wbc)
2331{
2332 struct blk_plug plug;
2333 int ret;
2334
2335 /* deal with chardevs and other special file */
2336 if (!mapping->a_ops->writepage)
2337 return 0;
2338
2339 blk_start_plug(&plug);
2340 ret = write_cache_pages(mapping, wbc, __writepage, mapping);
2341 blk_finish_plug(&plug);
2342 return ret;
2343}
2344
2345EXPORT_SYMBOL(generic_writepages);
2346
2347int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
2348{
2349 int ret;
2350
2351 if (wbc->nr_to_write <= 0)
2352 return 0;
2353 while (1) {
2354 if (mapping->a_ops->writepages)
2355 ret = mapping->a_ops->writepages(mapping, wbc);
2356 else
2357 ret = generic_writepages(mapping, wbc);
2358 if ((ret != -ENOMEM) || (wbc->sync_mode != WB_SYNC_ALL))
2359 break;
2360 cond_resched();
2361 congestion_wait(BLK_RW_ASYNC, HZ/50);
2362 }
2363 return ret;
2364}
2365
2366/**
2367 * write_one_page - write out a single page and wait on I/O
2368 * @page: the page to write
2369 *
2370 * The page must be locked by the caller and will be unlocked upon return.
2371 *
2372 * Note that the mapping's AS_EIO/AS_ENOSPC flags will be cleared when this
2373 * function returns.
2374 *
2375 * Return: %0 on success, negative error code otherwise
2376 */
2377int write_one_page(struct page *page)
2378{
2379 struct address_space *mapping = page->mapping;
2380 int ret = 0;
2381 struct writeback_control wbc = {
2382 .sync_mode = WB_SYNC_ALL,
2383 .nr_to_write = 1,
2384 };
2385
2386 BUG_ON(!PageLocked(page));
2387
2388 wait_on_page_writeback(page);
2389
2390 if (clear_page_dirty_for_io(page)) {
2391 get_page(page);
2392 ret = mapping->a_ops->writepage(page, &wbc);
2393 if (ret == 0)
2394 wait_on_page_writeback(page);
2395 put_page(page);
2396 } else {
2397 unlock_page(page);
2398 }
2399
2400 if (!ret)
2401 ret = filemap_check_errors(mapping);
2402 return ret;
2403}
2404EXPORT_SYMBOL(write_one_page);
2405
2406/*
2407 * For address_spaces which do not use buffers nor write back.
2408 */
2409int __set_page_dirty_no_writeback(struct page *page)
2410{
2411 if (!PageDirty(page))
2412 return !TestSetPageDirty(page);
2413 return 0;
2414}
2415EXPORT_SYMBOL(__set_page_dirty_no_writeback);
2416
2417/*
2418 * Helper function for set_page_dirty family.
2419 *
2420 * Caller must hold lock_page_memcg().
2421 *
2422 * NOTE: This relies on being atomic wrt interrupts.
2423 */
2424static void account_page_dirtied(struct page *page,
2425 struct address_space *mapping)
2426{
2427 struct inode *inode = mapping->host;
2428
2429 trace_writeback_dirty_page(page, mapping);
2430
2431 if (mapping_can_writeback(mapping)) {
2432 struct bdi_writeback *wb;
2433
2434 inode_attach_wb(inode, page);
2435 wb = inode_to_wb(inode);
2436
2437 __inc_lruvec_page_state(page, NR_FILE_DIRTY);
2438 __inc_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2439 __inc_node_page_state(page, NR_DIRTIED);
2440 inc_wb_stat(wb, WB_RECLAIMABLE);
2441 inc_wb_stat(wb, WB_DIRTIED);
2442 task_io_account_write(PAGE_SIZE);
2443 current->nr_dirtied++;
2444 __this_cpu_inc(bdp_ratelimits);
2445
2446 mem_cgroup_track_foreign_dirty(page, wb);
2447 }
2448}
2449
2450/*
2451 * Helper function for deaccounting dirty page without writeback.
2452 *
2453 * Caller must hold lock_page_memcg().
2454 */
2455void account_page_cleaned(struct page *page, struct address_space *mapping,
2456 struct bdi_writeback *wb)
2457{
2458 if (mapping_can_writeback(mapping)) {
2459 dec_lruvec_page_state(page, NR_FILE_DIRTY);
2460 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2461 dec_wb_stat(wb, WB_RECLAIMABLE);
2462 task_io_account_cancelled_write(PAGE_SIZE);
2463 }
2464}
2465
2466/*
2467 * Mark the page dirty, and set it dirty in the page cache, and mark the inode
2468 * dirty.
2469 *
2470 * If warn is true, then emit a warning if the page is not uptodate and has
2471 * not been truncated.
2472 *
2473 * The caller must hold lock_page_memcg().
2474 */
2475void __set_page_dirty(struct page *page, struct address_space *mapping,
2476 int warn)
2477{
2478 unsigned long flags;
2479
2480 xa_lock_irqsave(&mapping->i_pages, flags);
2481 if (page->mapping) { /* Race with truncate? */
2482 WARN_ON_ONCE(warn && !PageUptodate(page));
2483 account_page_dirtied(page, mapping);
2484 __xa_set_mark(&mapping->i_pages, page_index(page),
2485 PAGECACHE_TAG_DIRTY);
2486 }
2487 xa_unlock_irqrestore(&mapping->i_pages, flags);
2488}
2489
2490/*
2491 * For address_spaces which do not use buffers. Just tag the page as dirty in
2492 * the xarray.
2493 *
2494 * This is also used when a single buffer is being dirtied: we want to set the
2495 * page dirty in that case, but not all the buffers. This is a "bottom-up"
2496 * dirtying, whereas __set_page_dirty_buffers() is a "top-down" dirtying.
2497 *
2498 * The caller must ensure this doesn't race with truncation. Most will simply
2499 * hold the page lock, but e.g. zap_pte_range() calls with the page mapped and
2500 * the pte lock held, which also locks out truncation.
2501 */
2502int __set_page_dirty_nobuffers(struct page *page)
2503{
2504 lock_page_memcg(page);
2505 if (!TestSetPageDirty(page)) {
2506 struct address_space *mapping = page_mapping(page);
2507
2508 if (!mapping) {
2509 unlock_page_memcg(page);
2510 return 1;
2511 }
2512 __set_page_dirty(page, mapping, !PagePrivate(page));
2513 unlock_page_memcg(page);
2514
2515 if (mapping->host) {
2516 /* !PageAnon && !swapper_space */
2517 __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
2518 }
2519 return 1;
2520 }
2521 unlock_page_memcg(page);
2522 return 0;
2523}
2524EXPORT_SYMBOL(__set_page_dirty_nobuffers);
2525
2526/*
2527 * Call this whenever redirtying a page, to de-account the dirty counters
2528 * (NR_DIRTIED, WB_DIRTIED, tsk->nr_dirtied), so that they match the written
2529 * counters (NR_WRITTEN, WB_WRITTEN) in long term. The mismatches will lead to
2530 * systematic errors in balanced_dirty_ratelimit and the dirty pages position
2531 * control.
2532 */
2533void account_page_redirty(struct page *page)
2534{
2535 struct address_space *mapping = page->mapping;
2536
2537 if (mapping && mapping_can_writeback(mapping)) {
2538 struct inode *inode = mapping->host;
2539 struct bdi_writeback *wb;
2540 struct wb_lock_cookie cookie = {};
2541
2542 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2543 current->nr_dirtied--;
2544 dec_node_page_state(page, NR_DIRTIED);
2545 dec_wb_stat(wb, WB_DIRTIED);
2546 unlocked_inode_to_wb_end(inode, &cookie);
2547 }
2548}
2549EXPORT_SYMBOL(account_page_redirty);
2550
2551/*
2552 * When a writepage implementation decides that it doesn't want to write this
2553 * page for some reason, it should redirty the locked page via
2554 * redirty_page_for_writepage() and it should then unlock the page and return 0
2555 */
2556int redirty_page_for_writepage(struct writeback_control *wbc, struct page *page)
2557{
2558 int ret;
2559
2560 wbc->pages_skipped++;
2561 ret = __set_page_dirty_nobuffers(page);
2562 account_page_redirty(page);
2563 return ret;
2564}
2565EXPORT_SYMBOL(redirty_page_for_writepage);
2566
2567/*
2568 * Dirty a page.
2569 *
2570 * For pages with a mapping this should be done under the page lock for the
2571 * benefit of asynchronous memory errors who prefer a consistent dirty state.
2572 * This rule can be broken in some special cases, but should be better not to.
2573 */
2574int set_page_dirty(struct page *page)
2575{
2576 struct address_space *mapping = page_mapping(page);
2577
2578 page = compound_head(page);
2579 if (likely(mapping)) {
2580 /*
2581 * readahead/lru_deactivate_page could remain
2582 * PG_readahead/PG_reclaim due to race with end_page_writeback
2583 * About readahead, if the page is written, the flags would be
2584 * reset. So no problem.
2585 * About lru_deactivate_page, if the page is redirty, the flag
2586 * will be reset. So no problem. but if the page is used by readahead
2587 * it will confuse readahead and make it restart the size rampup
2588 * process. But it's a trivial problem.
2589 */
2590 if (PageReclaim(page))
2591 ClearPageReclaim(page);
2592 return mapping->a_ops->set_page_dirty(page);
2593 }
2594 if (!PageDirty(page)) {
2595 if (!TestSetPageDirty(page))
2596 return 1;
2597 }
2598 return 0;
2599}
2600EXPORT_SYMBOL(set_page_dirty);
2601
2602/*
2603 * set_page_dirty() is racy if the caller has no reference against
2604 * page->mapping->host, and if the page is unlocked. This is because another
2605 * CPU could truncate the page off the mapping and then free the mapping.
2606 *
2607 * Usually, the page _is_ locked, or the caller is a user-space process which
2608 * holds a reference on the inode by having an open file.
2609 *
2610 * In other cases, the page should be locked before running set_page_dirty().
2611 */
2612int set_page_dirty_lock(struct page *page)
2613{
2614 int ret;
2615
2616 lock_page(page);
2617 ret = set_page_dirty(page);
2618 unlock_page(page);
2619 return ret;
2620}
2621EXPORT_SYMBOL(set_page_dirty_lock);
2622
2623/*
2624 * This cancels just the dirty bit on the kernel page itself, it does NOT
2625 * actually remove dirty bits on any mmap's that may be around. It also
2626 * leaves the page tagged dirty, so any sync activity will still find it on
2627 * the dirty lists, and in particular, clear_page_dirty_for_io() will still
2628 * look at the dirty bits in the VM.
2629 *
2630 * Doing this should *normally* only ever be done when a page is truncated,
2631 * and is not actually mapped anywhere at all. However, fs/buffer.c does
2632 * this when it notices that somebody has cleaned out all the buffers on a
2633 * page without actually doing it through the VM. Can you say "ext3 is
2634 * horribly ugly"? Thought you could.
2635 */
2636void __cancel_dirty_page(struct page *page)
2637{
2638 struct address_space *mapping = page_mapping(page);
2639
2640 if (mapping_can_writeback(mapping)) {
2641 struct inode *inode = mapping->host;
2642 struct bdi_writeback *wb;
2643 struct wb_lock_cookie cookie = {};
2644
2645 lock_page_memcg(page);
2646 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2647
2648 if (TestClearPageDirty(page))
2649 account_page_cleaned(page, mapping, wb);
2650
2651 unlocked_inode_to_wb_end(inode, &cookie);
2652 unlock_page_memcg(page);
2653 } else {
2654 ClearPageDirty(page);
2655 }
2656}
2657EXPORT_SYMBOL(__cancel_dirty_page);
2658
2659/*
2660 * Clear a page's dirty flag, while caring for dirty memory accounting.
2661 * Returns true if the page was previously dirty.
2662 *
2663 * This is for preparing to put the page under writeout. We leave the page
2664 * tagged as dirty in the xarray so that a concurrent write-for-sync
2665 * can discover it via a PAGECACHE_TAG_DIRTY walk. The ->writepage
2666 * implementation will run either set_page_writeback() or set_page_dirty(),
2667 * at which stage we bring the page's dirty flag and xarray dirty tag
2668 * back into sync.
2669 *
2670 * This incoherency between the page's dirty flag and xarray tag is
2671 * unfortunate, but it only exists while the page is locked.
2672 */
2673int clear_page_dirty_for_io(struct page *page)
2674{
2675 struct address_space *mapping = page_mapping(page);
2676 int ret = 0;
2677
2678 VM_BUG_ON_PAGE(!PageLocked(page), page);
2679
2680 if (mapping && mapping_can_writeback(mapping)) {
2681 struct inode *inode = mapping->host;
2682 struct bdi_writeback *wb;
2683 struct wb_lock_cookie cookie = {};
2684
2685 /*
2686 * Yes, Virginia, this is indeed insane.
2687 *
2688 * We use this sequence to make sure that
2689 * (a) we account for dirty stats properly
2690 * (b) we tell the low-level filesystem to
2691 * mark the whole page dirty if it was
2692 * dirty in a pagetable. Only to then
2693 * (c) clean the page again and return 1 to
2694 * cause the writeback.
2695 *
2696 * This way we avoid all nasty races with the
2697 * dirty bit in multiple places and clearing
2698 * them concurrently from different threads.
2699 *
2700 * Note! Normally the "set_page_dirty(page)"
2701 * has no effect on the actual dirty bit - since
2702 * that will already usually be set. But we
2703 * need the side effects, and it can help us
2704 * avoid races.
2705 *
2706 * We basically use the page "master dirty bit"
2707 * as a serialization point for all the different
2708 * threads doing their things.
2709 */
2710 if (page_mkclean(page))
2711 set_page_dirty(page);
2712 /*
2713 * We carefully synchronise fault handlers against
2714 * installing a dirty pte and marking the page dirty
2715 * at this point. We do this by having them hold the
2716 * page lock while dirtying the page, and pages are
2717 * always locked coming in here, so we get the desired
2718 * exclusion.
2719 */
2720 wb = unlocked_inode_to_wb_begin(inode, &cookie);
2721 if (TestClearPageDirty(page)) {
2722 dec_lruvec_page_state(page, NR_FILE_DIRTY);
2723 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2724 dec_wb_stat(wb, WB_RECLAIMABLE);
2725 ret = 1;
2726 }
2727 unlocked_inode_to_wb_end(inode, &cookie);
2728 return ret;
2729 }
2730 return TestClearPageDirty(page);
2731}
2732EXPORT_SYMBOL(clear_page_dirty_for_io);
2733
2734int test_clear_page_writeback(struct page *page)
2735{
2736 struct address_space *mapping = page_mapping(page);
2737 int ret;
2738
2739 lock_page_memcg(page);
2740 if (mapping && mapping_use_writeback_tags(mapping)) {
2741 struct inode *inode = mapping->host;
2742 struct backing_dev_info *bdi = inode_to_bdi(inode);
2743 unsigned long flags;
2744
2745 xa_lock_irqsave(&mapping->i_pages, flags);
2746 ret = TestClearPageWriteback(page);
2747 if (ret) {
2748 __xa_clear_mark(&mapping->i_pages, page_index(page),
2749 PAGECACHE_TAG_WRITEBACK);
2750 if (bdi->capabilities & BDI_CAP_WRITEBACK_ACCT) {
2751 struct bdi_writeback *wb = inode_to_wb(inode);
2752
2753 dec_wb_stat(wb, WB_WRITEBACK);
2754 __wb_writeout_inc(wb);
2755 }
2756 }
2757
2758 if (mapping->host && !mapping_tagged(mapping,
2759 PAGECACHE_TAG_WRITEBACK))
2760 sb_clear_inode_writeback(mapping->host);
2761
2762 xa_unlock_irqrestore(&mapping->i_pages, flags);
2763 } else {
2764 ret = TestClearPageWriteback(page);
2765 }
2766 if (ret) {
2767 dec_lruvec_page_state(page, NR_WRITEBACK);
2768 dec_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2769 inc_node_page_state(page, NR_WRITTEN);
2770 }
2771 unlock_page_memcg(page);
2772 return ret;
2773}
2774
2775int __test_set_page_writeback(struct page *page, bool keep_write)
2776{
2777 struct address_space *mapping = page_mapping(page);
2778 int ret, access_ret;
2779
2780 lock_page_memcg(page);
2781 if (mapping && mapping_use_writeback_tags(mapping)) {
2782 XA_STATE(xas, &mapping->i_pages, page_index(page));
2783 struct inode *inode = mapping->host;
2784 struct backing_dev_info *bdi = inode_to_bdi(inode);
2785 unsigned long flags;
2786
2787 xas_lock_irqsave(&xas, flags);
2788 xas_load(&xas);
2789 ret = TestSetPageWriteback(page);
2790 if (!ret) {
2791 bool on_wblist;
2792
2793 on_wblist = mapping_tagged(mapping,
2794 PAGECACHE_TAG_WRITEBACK);
2795
2796 xas_set_mark(&xas, PAGECACHE_TAG_WRITEBACK);
2797 if (bdi->capabilities & BDI_CAP_WRITEBACK_ACCT)
2798 inc_wb_stat(inode_to_wb(inode), WB_WRITEBACK);
2799
2800 /*
2801 * We can come through here when swapping anonymous
2802 * pages, so we don't necessarily have an inode to track
2803 * for sync.
2804 */
2805 if (mapping->host && !on_wblist)
2806 sb_mark_inode_writeback(mapping->host);
2807 }
2808 if (!PageDirty(page))
2809 xas_clear_mark(&xas, PAGECACHE_TAG_DIRTY);
2810 if (!keep_write)
2811 xas_clear_mark(&xas, PAGECACHE_TAG_TOWRITE);
2812 xas_unlock_irqrestore(&xas, flags);
2813 } else {
2814 ret = TestSetPageWriteback(page);
2815 }
2816 if (!ret) {
2817 inc_lruvec_page_state(page, NR_WRITEBACK);
2818 inc_zone_page_state(page, NR_ZONE_WRITE_PENDING);
2819 }
2820 unlock_page_memcg(page);
2821 access_ret = arch_make_page_accessible(page);
2822 /*
2823 * If writeback has been triggered on a page that cannot be made
2824 * accessible, it is too late to recover here.
2825 */
2826 VM_BUG_ON_PAGE(access_ret != 0, page);
2827
2828 return ret;
2829
2830}
2831EXPORT_SYMBOL(__test_set_page_writeback);
2832
2833/*
2834 * Wait for a page to complete writeback
2835 */
2836void wait_on_page_writeback(struct page *page)
2837{
2838 while (PageWriteback(page)) {
2839 trace_wait_on_page_writeback(page, page_mapping(page));
2840 wait_on_page_bit(page, PG_writeback);
2841 }
2842}
2843EXPORT_SYMBOL_GPL(wait_on_page_writeback);
2844
2845/*
2846 * Wait for a page to complete writeback. Returns -EINTR if we get a
2847 * fatal signal while waiting.
2848 */
2849int wait_on_page_writeback_killable(struct page *page)
2850{
2851 while (PageWriteback(page)) {
2852 trace_wait_on_page_writeback(page, page_mapping(page));
2853 if (wait_on_page_bit_killable(page, PG_writeback))
2854 return -EINTR;
2855 }
2856
2857 return 0;
2858}
2859EXPORT_SYMBOL_GPL(wait_on_page_writeback_killable);
2860
2861/**
2862 * wait_for_stable_page() - wait for writeback to finish, if necessary.
2863 * @page: The page to wait on.
2864 *
2865 * This function determines if the given page is related to a backing device
2866 * that requires page contents to be held stable during writeback. If so, then
2867 * it will wait for any pending writeback to complete.
2868 */
2869void wait_for_stable_page(struct page *page)
2870{
2871 page = thp_head(page);
2872 if (page->mapping->host->i_sb->s_iflags & SB_I_STABLE_WRITES)
2873 wait_on_page_writeback(page);
2874}
2875EXPORT_SYMBOL_GPL(wait_for_stable_page);