Loading...
1/*
2 * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
3 * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
4 * Copyright (C) 2004 PathScale, Inc
5 * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
6 * Licensed under the GPL
7 */
8
9#include <stdlib.h>
10#include <stdarg.h>
11#include <errno.h>
12#include <signal.h>
13#include <strings.h>
14#include <as-layout.h>
15#include <kern_util.h>
16#include <os.h>
17#include <sysdep/mcontext.h>
18#include <um_malloc.h>
19#include <sys/ucontext.h>
20
21void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
22 [SIGTRAP] = relay_signal,
23 [SIGFPE] = relay_signal,
24 [SIGILL] = relay_signal,
25 [SIGWINCH] = winch,
26 [SIGBUS] = bus_handler,
27 [SIGSEGV] = segv_handler,
28 [SIGIO] = sigio_handler,
29 [SIGALRM] = timer_handler
30};
31
32static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc)
33{
34 struct uml_pt_regs *r;
35 int save_errno = errno;
36
37 r = uml_kmalloc(sizeof(struct uml_pt_regs), UM_GFP_ATOMIC);
38 if (!r)
39 panic("out of memory");
40
41 r->is_user = 0;
42 if (sig == SIGSEGV) {
43 /* For segfaults, we want the data from the sigcontext. */
44 get_regs_from_mc(r, mc);
45 GET_FAULTINFO_FROM_MC(r->faultinfo, mc);
46 }
47
48 /* enable signals if sig isn't IRQ signal */
49 if ((sig != SIGIO) && (sig != SIGWINCH) && (sig != SIGALRM))
50 unblock_signals();
51
52 (*sig_info[sig])(sig, si, r);
53
54 errno = save_errno;
55
56 free(r);
57}
58
59/*
60 * These are the asynchronous signals. SIGPROF is excluded because we want to
61 * be able to profile all of UML, not just the non-critical sections. If
62 * profiling is not thread-safe, then that is not my problem. We can disable
63 * profiling when SMP is enabled in that case.
64 */
65#define SIGIO_BIT 0
66#define SIGIO_MASK (1 << SIGIO_BIT)
67
68#define SIGALRM_BIT 1
69#define SIGALRM_MASK (1 << SIGALRM_BIT)
70
71static int signals_enabled;
72static unsigned int signals_pending;
73static unsigned int signals_active = 0;
74
75void sig_handler(int sig, struct siginfo *si, mcontext_t *mc)
76{
77 int enabled;
78
79 enabled = signals_enabled;
80 if (!enabled && (sig == SIGIO)) {
81 signals_pending |= SIGIO_MASK;
82 return;
83 }
84
85 block_signals();
86
87 sig_handler_common(sig, si, mc);
88
89 set_signals(enabled);
90}
91
92static void timer_real_alarm_handler(mcontext_t *mc)
93{
94 struct uml_pt_regs *regs;
95
96 regs = uml_kmalloc(sizeof(struct uml_pt_regs), UM_GFP_ATOMIC);
97 if (!regs)
98 panic("out of memory");
99
100 if (mc != NULL)
101 get_regs_from_mc(regs, mc);
102 timer_handler(SIGALRM, NULL, regs);
103
104 free(regs);
105}
106
107void timer_alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc)
108{
109 int enabled;
110
111 enabled = signals_enabled;
112 if (!signals_enabled) {
113 signals_pending |= SIGALRM_MASK;
114 return;
115 }
116
117 block_signals();
118
119 signals_active |= SIGALRM_MASK;
120
121 timer_real_alarm_handler(mc);
122
123 signals_active &= ~SIGALRM_MASK;
124
125 set_signals(enabled);
126}
127
128void deliver_alarm(void) {
129 timer_alarm_handler(SIGALRM, NULL, NULL);
130}
131
132void timer_set_signal_handler(void)
133{
134 set_handler(SIGALRM);
135}
136
137void set_sigstack(void *sig_stack, int size)
138{
139 stack_t stack = {
140 .ss_flags = 0,
141 .ss_sp = sig_stack,
142 .ss_size = size - sizeof(void *)
143 };
144
145 if (sigaltstack(&stack, NULL) != 0)
146 panic("enabling signal stack failed, errno = %d\n", errno);
147}
148
149static void (*handlers[_NSIG])(int sig, struct siginfo *si, mcontext_t *mc) = {
150 [SIGSEGV] = sig_handler,
151 [SIGBUS] = sig_handler,
152 [SIGILL] = sig_handler,
153 [SIGFPE] = sig_handler,
154 [SIGTRAP] = sig_handler,
155
156 [SIGIO] = sig_handler,
157 [SIGWINCH] = sig_handler,
158 [SIGALRM] = timer_alarm_handler
159};
160
161static void hard_handler(int sig, siginfo_t *si, void *p)
162{
163 ucontext_t *uc = p;
164 mcontext_t *mc = &uc->uc_mcontext;
165 unsigned long pending = 1UL << sig;
166
167 do {
168 int nested, bail;
169
170 /*
171 * pending comes back with one bit set for each
172 * interrupt that arrived while setting up the stack,
173 * plus a bit for this interrupt, plus the zero bit is
174 * set if this is a nested interrupt.
175 * If bail is true, then we interrupted another
176 * handler setting up the stack. In this case, we
177 * have to return, and the upper handler will deal
178 * with this interrupt.
179 */
180 bail = to_irq_stack(&pending);
181 if (bail)
182 return;
183
184 nested = pending & 1;
185 pending &= ~1;
186
187 while ((sig = ffs(pending)) != 0){
188 sig--;
189 pending &= ~(1 << sig);
190 (*handlers[sig])(sig, (struct siginfo *)si, mc);
191 }
192
193 /*
194 * Again, pending comes back with a mask of signals
195 * that arrived while tearing down the stack. If this
196 * is non-zero, we just go back, set up the stack
197 * again, and handle the new interrupts.
198 */
199 if (!nested)
200 pending = from_irq_stack(nested);
201 } while (pending);
202}
203
204void set_handler(int sig)
205{
206 struct sigaction action;
207 int flags = SA_SIGINFO | SA_ONSTACK;
208 sigset_t sig_mask;
209
210 action.sa_sigaction = hard_handler;
211
212 /* block irq ones */
213 sigemptyset(&action.sa_mask);
214 sigaddset(&action.sa_mask, SIGIO);
215 sigaddset(&action.sa_mask, SIGWINCH);
216 sigaddset(&action.sa_mask, SIGALRM);
217
218 if (sig == SIGSEGV)
219 flags |= SA_NODEFER;
220
221 if (sigismember(&action.sa_mask, sig))
222 flags |= SA_RESTART; /* if it's an irq signal */
223
224 action.sa_flags = flags;
225 action.sa_restorer = NULL;
226 if (sigaction(sig, &action, NULL) < 0)
227 panic("sigaction failed - errno = %d\n", errno);
228
229 sigemptyset(&sig_mask);
230 sigaddset(&sig_mask, sig);
231 if (sigprocmask(SIG_UNBLOCK, &sig_mask, NULL) < 0)
232 panic("sigprocmask failed - errno = %d\n", errno);
233}
234
235int change_sig(int signal, int on)
236{
237 sigset_t sigset;
238
239 sigemptyset(&sigset);
240 sigaddset(&sigset, signal);
241 if (sigprocmask(on ? SIG_UNBLOCK : SIG_BLOCK, &sigset, NULL) < 0)
242 return -errno;
243
244 return 0;
245}
246
247void block_signals(void)
248{
249 signals_enabled = 0;
250 /*
251 * This must return with signals disabled, so this barrier
252 * ensures that writes are flushed out before the return.
253 * This might matter if gcc figures out how to inline this and
254 * decides to shuffle this code into the caller.
255 */
256 barrier();
257}
258
259void unblock_signals(void)
260{
261 int save_pending;
262
263 if (signals_enabled == 1)
264 return;
265
266 /*
267 * We loop because the IRQ handler returns with interrupts off. So,
268 * interrupts may have arrived and we need to re-enable them and
269 * recheck signals_pending.
270 */
271 while (1) {
272 /*
273 * Save and reset save_pending after enabling signals. This
274 * way, signals_pending won't be changed while we're reading it.
275 */
276 signals_enabled = 1;
277
278 /*
279 * Setting signals_enabled and reading signals_pending must
280 * happen in this order.
281 */
282 barrier();
283
284 save_pending = signals_pending;
285 if (save_pending == 0)
286 return;
287
288 signals_pending = 0;
289
290 /*
291 * We have pending interrupts, so disable signals, as the
292 * handlers expect them off when they are called. They will
293 * be enabled again above.
294 */
295
296 signals_enabled = 0;
297
298 /*
299 * Deal with SIGIO first because the alarm handler might
300 * schedule, leaving the pending SIGIO stranded until we come
301 * back here.
302 *
303 * SIGIO's handler doesn't use siginfo or mcontext,
304 * so they can be NULL.
305 */
306 if (save_pending & SIGIO_MASK)
307 sig_handler_common(SIGIO, NULL, NULL);
308
309 /* Do not reenter the handler */
310
311 if ((save_pending & SIGALRM_MASK) && (!(signals_active & SIGALRM_MASK)))
312 timer_real_alarm_handler(NULL);
313
314 /* Rerun the loop only if there is still pending SIGIO and not in TIMER handler */
315
316 if (!(signals_pending & SIGIO_MASK) && (signals_active & SIGALRM_MASK))
317 return;
318
319 }
320}
321
322int get_signals(void)
323{
324 return signals_enabled;
325}
326
327int set_signals(int enable)
328{
329 int ret;
330 if (signals_enabled == enable)
331 return enable;
332
333 ret = signals_enabled;
334 if (enable)
335 unblock_signals();
336 else block_signals();
337
338 return ret;
339}
340
341int os_is_signal_stack(void)
342{
343 stack_t ss;
344 sigaltstack(NULL, &ss);
345
346 return ss.ss_flags & SS_ONSTACK;
347}
1/*
2 * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
3 * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
4 * Copyright (C) 2004 PathScale, Inc
5 * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
6 * Licensed under the GPL
7 */
8
9#include <stdlib.h>
10#include <stdarg.h>
11#include <errno.h>
12#include <signal.h>
13#include <strings.h>
14#include <as-layout.h>
15#include <kern_util.h>
16#include <os.h>
17#include <sysdep/mcontext.h>
18
19void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
20 [SIGTRAP] = relay_signal,
21 [SIGFPE] = relay_signal,
22 [SIGILL] = relay_signal,
23 [SIGWINCH] = winch,
24 [SIGBUS] = bus_handler,
25 [SIGSEGV] = segv_handler,
26 [SIGIO] = sigio_handler,
27 [SIGALRM] = timer_handler
28};
29
30static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc)
31{
32 struct uml_pt_regs r;
33 int save_errno = errno;
34
35 r.is_user = 0;
36 if (sig == SIGSEGV) {
37 /* For segfaults, we want the data from the sigcontext. */
38 get_regs_from_mc(&r, mc);
39 GET_FAULTINFO_FROM_MC(r.faultinfo, mc);
40 }
41
42 /* enable signals if sig isn't IRQ signal */
43 if ((sig != SIGIO) && (sig != SIGWINCH) && (sig != SIGALRM))
44 unblock_signals();
45
46 (*sig_info[sig])(sig, si, &r);
47
48 errno = save_errno;
49}
50
51/*
52 * These are the asynchronous signals. SIGPROF is excluded because we want to
53 * be able to profile all of UML, not just the non-critical sections. If
54 * profiling is not thread-safe, then that is not my problem. We can disable
55 * profiling when SMP is enabled in that case.
56 */
57#define SIGIO_BIT 0
58#define SIGIO_MASK (1 << SIGIO_BIT)
59
60#define SIGALRM_BIT 1
61#define SIGALRM_MASK (1 << SIGALRM_BIT)
62
63static int signals_enabled;
64static unsigned int signals_pending;
65static unsigned int signals_active = 0;
66
67void sig_handler(int sig, struct siginfo *si, mcontext_t *mc)
68{
69 int enabled;
70
71 enabled = signals_enabled;
72 if (!enabled && (sig == SIGIO)) {
73 signals_pending |= SIGIO_MASK;
74 return;
75 }
76
77 block_signals();
78
79 sig_handler_common(sig, si, mc);
80
81 set_signals(enabled);
82}
83
84static void timer_real_alarm_handler(mcontext_t *mc)
85{
86 struct uml_pt_regs regs;
87
88 if (mc != NULL)
89 get_regs_from_mc(®s, mc);
90 timer_handler(SIGALRM, NULL, ®s);
91}
92
93void timer_alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc)
94{
95 int enabled;
96
97 enabled = signals_enabled;
98 if (!signals_enabled) {
99 signals_pending |= SIGALRM_MASK;
100 return;
101 }
102
103 block_signals();
104
105 signals_active |= SIGALRM_MASK;
106
107 timer_real_alarm_handler(mc);
108
109 signals_active &= ~SIGALRM_MASK;
110
111 set_signals(enabled);
112}
113
114void deliver_alarm(void) {
115 timer_alarm_handler(SIGALRM, NULL, NULL);
116}
117
118void timer_set_signal_handler(void)
119{
120 set_handler(SIGALRM);
121}
122
123void set_sigstack(void *sig_stack, int size)
124{
125 stack_t stack = {
126 .ss_flags = 0,
127 .ss_sp = sig_stack,
128 .ss_size = size - sizeof(void *)
129 };
130
131 if (sigaltstack(&stack, NULL) != 0)
132 panic("enabling signal stack failed, errno = %d\n", errno);
133}
134
135static void (*handlers[_NSIG])(int sig, struct siginfo *si, mcontext_t *mc) = {
136 [SIGSEGV] = sig_handler,
137 [SIGBUS] = sig_handler,
138 [SIGILL] = sig_handler,
139 [SIGFPE] = sig_handler,
140 [SIGTRAP] = sig_handler,
141
142 [SIGIO] = sig_handler,
143 [SIGWINCH] = sig_handler,
144 [SIGALRM] = timer_alarm_handler
145};
146
147static void hard_handler(int sig, siginfo_t *si, void *p)
148{
149 struct ucontext *uc = p;
150 mcontext_t *mc = &uc->uc_mcontext;
151 unsigned long pending = 1UL << sig;
152
153 do {
154 int nested, bail;
155
156 /*
157 * pending comes back with one bit set for each
158 * interrupt that arrived while setting up the stack,
159 * plus a bit for this interrupt, plus the zero bit is
160 * set if this is a nested interrupt.
161 * If bail is true, then we interrupted another
162 * handler setting up the stack. In this case, we
163 * have to return, and the upper handler will deal
164 * with this interrupt.
165 */
166 bail = to_irq_stack(&pending);
167 if (bail)
168 return;
169
170 nested = pending & 1;
171 pending &= ~1;
172
173 while ((sig = ffs(pending)) != 0){
174 sig--;
175 pending &= ~(1 << sig);
176 (*handlers[sig])(sig, (struct siginfo *)si, mc);
177 }
178
179 /*
180 * Again, pending comes back with a mask of signals
181 * that arrived while tearing down the stack. If this
182 * is non-zero, we just go back, set up the stack
183 * again, and handle the new interrupts.
184 */
185 if (!nested)
186 pending = from_irq_stack(nested);
187 } while (pending);
188}
189
190void set_handler(int sig)
191{
192 struct sigaction action;
193 int flags = SA_SIGINFO | SA_ONSTACK;
194 sigset_t sig_mask;
195
196 action.sa_sigaction = hard_handler;
197
198 /* block irq ones */
199 sigemptyset(&action.sa_mask);
200 sigaddset(&action.sa_mask, SIGIO);
201 sigaddset(&action.sa_mask, SIGWINCH);
202 sigaddset(&action.sa_mask, SIGALRM);
203
204 if (sig == SIGSEGV)
205 flags |= SA_NODEFER;
206
207 if (sigismember(&action.sa_mask, sig))
208 flags |= SA_RESTART; /* if it's an irq signal */
209
210 action.sa_flags = flags;
211 action.sa_restorer = NULL;
212 if (sigaction(sig, &action, NULL) < 0)
213 panic("sigaction failed - errno = %d\n", errno);
214
215 sigemptyset(&sig_mask);
216 sigaddset(&sig_mask, sig);
217 if (sigprocmask(SIG_UNBLOCK, &sig_mask, NULL) < 0)
218 panic("sigprocmask failed - errno = %d\n", errno);
219}
220
221int change_sig(int signal, int on)
222{
223 sigset_t sigset;
224
225 sigemptyset(&sigset);
226 sigaddset(&sigset, signal);
227 if (sigprocmask(on ? SIG_UNBLOCK : SIG_BLOCK, &sigset, NULL) < 0)
228 return -errno;
229
230 return 0;
231}
232
233void block_signals(void)
234{
235 signals_enabled = 0;
236 /*
237 * This must return with signals disabled, so this barrier
238 * ensures that writes are flushed out before the return.
239 * This might matter if gcc figures out how to inline this and
240 * decides to shuffle this code into the caller.
241 */
242 barrier();
243}
244
245void unblock_signals(void)
246{
247 int save_pending;
248
249 if (signals_enabled == 1)
250 return;
251
252 /*
253 * We loop because the IRQ handler returns with interrupts off. So,
254 * interrupts may have arrived and we need to re-enable them and
255 * recheck signals_pending.
256 */
257 while (1) {
258 /*
259 * Save and reset save_pending after enabling signals. This
260 * way, signals_pending won't be changed while we're reading it.
261 */
262 signals_enabled = 1;
263
264 /*
265 * Setting signals_enabled and reading signals_pending must
266 * happen in this order.
267 */
268 barrier();
269
270 save_pending = signals_pending;
271 if (save_pending == 0)
272 return;
273
274 signals_pending = 0;
275
276 /*
277 * We have pending interrupts, so disable signals, as the
278 * handlers expect them off when they are called. They will
279 * be enabled again above.
280 */
281
282 signals_enabled = 0;
283
284 /*
285 * Deal with SIGIO first because the alarm handler might
286 * schedule, leaving the pending SIGIO stranded until we come
287 * back here.
288 *
289 * SIGIO's handler doesn't use siginfo or mcontext,
290 * so they can be NULL.
291 */
292 if (save_pending & SIGIO_MASK)
293 sig_handler_common(SIGIO, NULL, NULL);
294
295 /* Do not reenter the handler */
296
297 if ((save_pending & SIGALRM_MASK) && (!(signals_active & SIGALRM_MASK)))
298 timer_real_alarm_handler(NULL);
299
300 /* Rerun the loop only if there is still pending SIGIO and not in TIMER handler */
301
302 if (!(signals_pending & SIGIO_MASK) && (signals_active & SIGALRM_MASK))
303 return;
304
305 }
306}
307
308int get_signals(void)
309{
310 return signals_enabled;
311}
312
313int set_signals(int enable)
314{
315 int ret;
316 if (signals_enabled == enable)
317 return enable;
318
319 ret = signals_enabled;
320 if (enable)
321 unblock_signals();
322 else block_signals();
323
324 return ret;
325}
326
327int os_is_signal_stack(void)
328{
329 stack_t ss;
330 sigaltstack(NULL, &ss);
331
332 return ss.ss_flags & SS_ONSTACK;
333}