Loading...
1#
2# Broadcom device configuration
3#
4
5config NET_VENDOR_BROADCOM
6 bool "Broadcom devices"
7 default y
8 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
9 SIBYTE_SB1xxx_SOC
10 ---help---
11 If you have a network (Ethernet) chipset belonging to this class,
12 say Y.
13
14 Note that the answer to this question does not directly affect
15 the kernel: saying N will just case the configurator to skip all
16 the questions regarding AMD chipsets. If you say Y, you will be asked
17 for your specific chipset/driver in the following questions.
18
19if NET_VENDOR_BROADCOM
20
21config B44
22 tristate "Broadcom 440x/47xx ethernet support"
23 depends on SSB_POSSIBLE && HAS_DMA
24 select SSB
25 select MII
26 select PHYLIB
27 ---help---
28 If you have a network (Ethernet) controller of this type, say Y
29 or M here.
30
31 To compile this driver as a module, choose M here. The module
32 will be called b44.
33
34# Auto-select SSB PCI-HOST support, if possible
35config B44_PCI_AUTOSELECT
36 bool
37 depends on B44 && SSB_PCIHOST_POSSIBLE
38 select SSB_PCIHOST
39 default y
40
41# Auto-select SSB PCICORE driver, if possible
42config B44_PCICORE_AUTOSELECT
43 bool
44 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
45 select SSB_DRIVER_PCICORE
46 default y
47
48config B44_PCI
49 bool
50 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
51 default y
52
53config BCM63XX_ENET
54 tristate "Broadcom 63xx internal mac support"
55 depends on BCM63XX
56 select MII
57 select PHYLIB
58 help
59 This driver supports the ethernet MACs in the Broadcom 63xx
60 MIPS chipset family (BCM63XX).
61
62config BCMGENET
63 tristate "Broadcom GENET internal MAC support"
64 select MII
65 select PHYLIB
66 select FIXED_PHY
67 select BCM7XXX_PHY
68 help
69 This driver supports the built-in Ethernet MACs found in the
70 Broadcom BCM7xxx Set Top Box family chipset.
71
72config BNX2
73 tristate "QLogic bnx2 support"
74 depends on PCI
75 select CRC32
76 select FW_LOADER
77 ---help---
78 This driver supports QLogic bnx2 gigabit Ethernet cards.
79
80 To compile this driver as a module, choose M here: the module
81 will be called bnx2. This is recommended.
82
83config CNIC
84 tristate "QLogic CNIC support"
85 depends on PCI && (IPV6 || IPV6=n)
86 select BNX2
87 select UIO
88 ---help---
89 This driver supports offload features of QLogic bnx2 gigabit
90 Ethernet cards.
91
92 To compile this driver as a module, choose M here: the module
93 will be called cnic. This is recommended.
94
95config SB1250_MAC
96 tristate "SB1250 Gigabit Ethernet support"
97 depends on SIBYTE_SB1xxx_SOC
98 select PHYLIB
99 ---help---
100 This driver supports Gigabit Ethernet interfaces based on the
101 Broadcom SiByte family of System-On-a-Chip parts. They include
102 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
103 and BCM1480 chips.
104
105 To compile this driver as a module, choose M here: the module
106 will be called sb1250-mac.
107
108config TIGON3
109 tristate "Broadcom Tigon3 support"
110 depends on PCI
111 select PHYLIB
112 select HWMON
113 imply PTP_1588_CLOCK
114 ---help---
115 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
116
117 To compile this driver as a module, choose M here: the module
118 will be called tg3. This is recommended.
119
120config BNX2X
121 tristate "Broadcom NetXtremeII 10Gb support"
122 depends on PCI
123 imply PTP_1588_CLOCK
124 select FW_LOADER
125 select ZLIB_INFLATE
126 select LIBCRC32C
127 select MDIO
128 ---help---
129 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
130 To compile this driver as a module, choose M here: the module
131 will be called bnx2x. This is recommended.
132
133config BNX2X_SRIOV
134 bool "Broadcom 578xx and 57712 SR-IOV support"
135 depends on BNX2X && PCI_IOV
136 default y
137 ---help---
138 This configuration parameter enables Single Root Input Output
139 Virtualization support in the 578xx and 57712 products. This
140 allows for virtual function acceleration in virtual environments.
141
142config BGMAC
143 tristate
144 help
145 This enables the integrated ethernet controller support for many
146 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
147 needs to be enabled to select this.
148
149config BGMAC_BCMA
150 tristate "Broadcom iProc GBit BCMA support"
151 depends on BCMA && BCMA_HOST_SOC
152 depends on HAS_DMA
153 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
154 select BGMAC
155 select PHYLIB
156 select FIXED_PHY
157 ---help---
158 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
159 They can be found on BCM47xx SoCs and provide gigabit ethernet.
160 In case of using this driver on BCM4706 it's also requires to enable
161 BCMA_DRIVER_GMAC_CMN to make it work.
162
163config BGMAC_PLATFORM
164 tristate "Broadcom iProc GBit platform support"
165 depends on HAS_DMA
166 depends on ARCH_BCM_IPROC || COMPILE_TEST
167 depends on OF
168 select BGMAC
169 select PHYLIB
170 select FIXED_PHY
171 default ARCH_BCM_IPROC
172 ---help---
173 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
174 controller through the generic platform interface
175
176config SYSTEMPORT
177 tristate "Broadcom SYSTEMPORT internal MAC support"
178 depends on OF
179 select MII
180 select PHYLIB
181 select FIXED_PHY
182 help
183 This driver supports the built-in Ethernet MACs found in the
184 Broadcom BCM7xxx Set Top Box family chipset using an internal
185 Ethernet switch.
186
187config BNXT
188 tristate "Broadcom NetXtreme-C/E support"
189 depends on PCI
190 select FW_LOADER
191 select LIBCRC32C
192 ---help---
193 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
194 Ethernet cards. To compile this driver as a module, choose M here:
195 the module will be called bnxt_en. This is recommended.
196
197config BNXT_SRIOV
198 bool "Broadcom NetXtreme-C/E SR-IOV support"
199 depends on BNXT && PCI_IOV
200 default y
201 ---help---
202 This configuration parameter enables Single Root Input Output
203 Virtualization support in the NetXtreme-C/E products. This
204 allows for virtual function acceleration in virtual environments.
205
206config BNXT_DCB
207 bool "Data Center Bridging (DCB) Support"
208 default n
209 depends on BNXT && DCB
210 ---help---
211 Say Y here if you want to use Data Center Bridging (DCB) in the
212 driver.
213
214 If unsure, say N.
215
216endif # NET_VENDOR_BROADCOM
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Broadcom device configuration
4#
5
6config NET_VENDOR_BROADCOM
7 bool "Broadcom devices"
8 default y
9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
10 SIBYTE_SB1xxx_SOC
11 help
12 If you have a network (Ethernet) chipset belonging to this class,
13 say Y.
14
15 Note that the answer to this question does not directly affect
16 the kernel: saying N will just cause the configurator to skip all
17 the questions regarding Broadcom chipsets. If you say Y, you will
18 be asked for your specific chipset/driver in the following questions.
19
20if NET_VENDOR_BROADCOM
21
22config B44
23 tristate "Broadcom 440x/47xx ethernet support"
24 depends on SSB_POSSIBLE && HAS_DMA
25 select SSB
26 select MII
27 select PHYLIB
28 help
29 If you have a network (Ethernet) controller of this type, say Y
30 or M here.
31
32 To compile this driver as a module, choose M here. The module
33 will be called b44.
34
35# Auto-select SSB PCI-HOST support, if possible
36config B44_PCI_AUTOSELECT
37 bool
38 depends on B44 && SSB_PCIHOST_POSSIBLE
39 select SSB_PCIHOST
40 default y
41
42# Auto-select SSB PCICORE driver, if possible
43config B44_PCICORE_AUTOSELECT
44 bool
45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
46 select SSB_DRIVER_PCICORE
47 default y
48
49config B44_PCI
50 bool
51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
52 default y
53
54config BCM63XX_ENET
55 tristate "Broadcom 63xx internal mac support"
56 depends on BCM63XX
57 select MII
58 select PHYLIB
59 help
60 This driver supports the ethernet MACs in the Broadcom 63xx
61 MIPS chipset family (BCM63XX).
62
63config BCMGENET
64 tristate "Broadcom GENET internal MAC support"
65 depends on HAS_IOMEM
66 select MII
67 select PHYLIB
68 select FIXED_PHY
69 select BCM7XXX_PHY
70 select MDIO_BCM_UNIMAC
71 select DIMLIB
72 select BROADCOM_PHY if ARCH_BCM2835
73 help
74 This driver supports the built-in Ethernet MACs found in the
75 Broadcom BCM7xxx Set Top Box family chipset.
76
77config BNX2
78 tristate "QLogic bnx2 support"
79 depends on PCI
80 select CRC32
81 select FW_LOADER
82 help
83 This driver supports QLogic bnx2 gigabit Ethernet cards.
84
85 To compile this driver as a module, choose M here: the module
86 will be called bnx2. This is recommended.
87
88config CNIC
89 tristate "QLogic CNIC support"
90 depends on PCI && (IPV6 || IPV6=n)
91 select BNX2
92 select UIO
93 help
94 This driver supports offload features of QLogic bnx2 gigabit
95 Ethernet cards.
96
97 To compile this driver as a module, choose M here: the module
98 will be called cnic. This is recommended.
99
100config SB1250_MAC
101 tristate "SB1250 Gigabit Ethernet support"
102 depends on SIBYTE_SB1xxx_SOC
103 select PHYLIB
104 help
105 This driver supports Gigabit Ethernet interfaces based on the
106 Broadcom SiByte family of System-On-a-Chip parts. They include
107 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
108 and BCM1480 chips.
109
110 To compile this driver as a module, choose M here: the module
111 will be called sb1250-mac.
112
113config TIGON3
114 tristate "Broadcom Tigon3 support"
115 depends on PCI
116 select PHYLIB
117 imply PTP_1588_CLOCK
118 help
119 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
120
121 To compile this driver as a module, choose M here: the module
122 will be called tg3. This is recommended.
123
124config TIGON3_HWMON
125 bool "Broadcom Tigon3 HWMON support"
126 default y
127 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
128 help
129 Say Y if you want to expose the thermal sensor on Tigon3 devices.
130
131config BNX2X
132 tristate "Broadcom NetXtremeII 10Gb support"
133 depends on PCI
134 imply PTP_1588_CLOCK
135 select FW_LOADER
136 select ZLIB_INFLATE
137 select LIBCRC32C
138 select MDIO
139 help
140 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
141 To compile this driver as a module, choose M here: the module
142 will be called bnx2x. This is recommended.
143
144config BNX2X_SRIOV
145 bool "Broadcom 578xx and 57712 SR-IOV support"
146 depends on BNX2X && PCI_IOV
147 default y
148 help
149 This configuration parameter enables Single Root Input Output
150 Virtualization support in the 578xx and 57712 products. This
151 allows for virtual function acceleration in virtual environments.
152
153config BGMAC
154 tristate
155 help
156 This enables the integrated ethernet controller support for many
157 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
158 needs to be enabled to select this.
159
160config BGMAC_BCMA
161 tristate "Broadcom iProc GBit BCMA support"
162 depends on BCMA && BCMA_HOST_SOC
163 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
164 select BGMAC
165 select PHYLIB
166 select FIXED_PHY
167 help
168 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
169 They can be found on BCM47xx SoCs and provide gigabit ethernet.
170 In case of using this driver on BCM4706 it's also requires to enable
171 BCMA_DRIVER_GMAC_CMN to make it work.
172
173config BGMAC_PLATFORM
174 tristate "Broadcom iProc GBit platform support"
175 depends on ARCH_BCM_IPROC || COMPILE_TEST
176 depends on OF
177 select BGMAC
178 select PHYLIB
179 select FIXED_PHY
180 default ARCH_BCM_IPROC
181 help
182 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
183 controller through the generic platform interface
184
185config SYSTEMPORT
186 tristate "Broadcom SYSTEMPORT internal MAC support"
187 depends on HAS_IOMEM
188 depends on NET_DSA || !NET_DSA
189 select MII
190 select PHYLIB
191 select FIXED_PHY
192 select DIMLIB
193 help
194 This driver supports the built-in Ethernet MACs found in the
195 Broadcom BCM7xxx Set Top Box family chipset using an internal
196 Ethernet switch.
197
198config BNXT
199 tristate "Broadcom NetXtreme-C/E support"
200 depends on PCI
201 select FW_LOADER
202 select LIBCRC32C
203 select NET_DEVLINK
204 select PAGE_POOL
205 select DIMLIB
206 help
207 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
208 Ethernet cards. To compile this driver as a module, choose M here:
209 the module will be called bnxt_en. This is recommended.
210
211config BNXT_SRIOV
212 bool "Broadcom NetXtreme-C/E SR-IOV support"
213 depends on BNXT && PCI_IOV
214 default y
215 help
216 This configuration parameter enables Single Root Input Output
217 Virtualization support in the NetXtreme-C/E products. This
218 allows for virtual function acceleration in virtual environments.
219
220config BNXT_FLOWER_OFFLOAD
221 bool "TC Flower offload support for NetXtreme-C/E"
222 depends on BNXT
223 default y
224 help
225 This configuration parameter enables TC Flower packet classifier
226 offload for eswitch. This option enables SR-IOV switchdev eswitch
227 offload.
228
229config BNXT_DCB
230 bool "Data Center Bridging (DCB) Support"
231 default n
232 depends on BNXT && DCB
233 help
234 Say Y here if you want to use Data Center Bridging (DCB) in the
235 driver.
236
237 If unsure, say N.
238
239config BNXT_HWMON
240 bool "Broadcom NetXtreme-C/E HWMON support"
241 default y
242 depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
243 help
244 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
245 devices, via the hwmon sysfs interface.
246
247endif # NET_VENDOR_BROADCOM