Loading...
1#
2# Broadcom device configuration
3#
4
5config NET_VENDOR_BROADCOM
6 bool "Broadcom devices"
7 default y
8 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
9 SIBYTE_SB1xxx_SOC
10 ---help---
11 If you have a network (Ethernet) chipset belonging to this class,
12 say Y.
13
14 Note that the answer to this question does not directly affect
15 the kernel: saying N will just case the configurator to skip all
16 the questions regarding AMD chipsets. If you say Y, you will be asked
17 for your specific chipset/driver in the following questions.
18
19if NET_VENDOR_BROADCOM
20
21config B44
22 tristate "Broadcom 440x/47xx ethernet support"
23 depends on SSB_POSSIBLE && HAS_DMA
24 select SSB
25 select MII
26 select PHYLIB
27 ---help---
28 If you have a network (Ethernet) controller of this type, say Y
29 or M here.
30
31 To compile this driver as a module, choose M here. The module
32 will be called b44.
33
34# Auto-select SSB PCI-HOST support, if possible
35config B44_PCI_AUTOSELECT
36 bool
37 depends on B44 && SSB_PCIHOST_POSSIBLE
38 select SSB_PCIHOST
39 default y
40
41# Auto-select SSB PCICORE driver, if possible
42config B44_PCICORE_AUTOSELECT
43 bool
44 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
45 select SSB_DRIVER_PCICORE
46 default y
47
48config B44_PCI
49 bool
50 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
51 default y
52
53config BCM63XX_ENET
54 tristate "Broadcom 63xx internal mac support"
55 depends on BCM63XX
56 select MII
57 select PHYLIB
58 help
59 This driver supports the ethernet MACs in the Broadcom 63xx
60 MIPS chipset family (BCM63XX).
61
62config BCMGENET
63 tristate "Broadcom GENET internal MAC support"
64 select MII
65 select PHYLIB
66 select FIXED_PHY
67 select BCM7XXX_PHY
68 help
69 This driver supports the built-in Ethernet MACs found in the
70 Broadcom BCM7xxx Set Top Box family chipset.
71
72config BNX2
73 tristate "QLogic bnx2 support"
74 depends on PCI
75 select CRC32
76 select FW_LOADER
77 ---help---
78 This driver supports QLogic bnx2 gigabit Ethernet cards.
79
80 To compile this driver as a module, choose M here: the module
81 will be called bnx2. This is recommended.
82
83config CNIC
84 tristate "QLogic CNIC support"
85 depends on PCI && (IPV6 || IPV6=n)
86 select BNX2
87 select UIO
88 ---help---
89 This driver supports offload features of QLogic bnx2 gigabit
90 Ethernet cards.
91
92 To compile this driver as a module, choose M here: the module
93 will be called cnic. This is recommended.
94
95config SB1250_MAC
96 tristate "SB1250 Gigabit Ethernet support"
97 depends on SIBYTE_SB1xxx_SOC
98 select PHYLIB
99 ---help---
100 This driver supports Gigabit Ethernet interfaces based on the
101 Broadcom SiByte family of System-On-a-Chip parts. They include
102 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
103 and BCM1480 chips.
104
105 To compile this driver as a module, choose M here: the module
106 will be called sb1250-mac.
107
108config TIGON3
109 tristate "Broadcom Tigon3 support"
110 depends on PCI
111 select PHYLIB
112 select HWMON
113 imply PTP_1588_CLOCK
114 ---help---
115 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
116
117 To compile this driver as a module, choose M here: the module
118 will be called tg3. This is recommended.
119
120config BNX2X
121 tristate "Broadcom NetXtremeII 10Gb support"
122 depends on PCI
123 imply PTP_1588_CLOCK
124 select FW_LOADER
125 select ZLIB_INFLATE
126 select LIBCRC32C
127 select MDIO
128 ---help---
129 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
130 To compile this driver as a module, choose M here: the module
131 will be called bnx2x. This is recommended.
132
133config BNX2X_SRIOV
134 bool "Broadcom 578xx and 57712 SR-IOV support"
135 depends on BNX2X && PCI_IOV
136 default y
137 ---help---
138 This configuration parameter enables Single Root Input Output
139 Virtualization support in the 578xx and 57712 products. This
140 allows for virtual function acceleration in virtual environments.
141
142config BGMAC
143 tristate
144 help
145 This enables the integrated ethernet controller support for many
146 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
147 needs to be enabled to select this.
148
149config BGMAC_BCMA
150 tristate "Broadcom iProc GBit BCMA support"
151 depends on BCMA && BCMA_HOST_SOC
152 depends on HAS_DMA
153 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
154 select BGMAC
155 select PHYLIB
156 select FIXED_PHY
157 ---help---
158 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
159 They can be found on BCM47xx SoCs and provide gigabit ethernet.
160 In case of using this driver on BCM4706 it's also requires to enable
161 BCMA_DRIVER_GMAC_CMN to make it work.
162
163config BGMAC_PLATFORM
164 tristate "Broadcom iProc GBit platform support"
165 depends on HAS_DMA
166 depends on ARCH_BCM_IPROC || COMPILE_TEST
167 depends on OF
168 select BGMAC
169 select PHYLIB
170 select FIXED_PHY
171 default ARCH_BCM_IPROC
172 ---help---
173 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
174 controller through the generic platform interface
175
176config SYSTEMPORT
177 tristate "Broadcom SYSTEMPORT internal MAC support"
178 depends on OF
179 select MII
180 select PHYLIB
181 select FIXED_PHY
182 help
183 This driver supports the built-in Ethernet MACs found in the
184 Broadcom BCM7xxx Set Top Box family chipset using an internal
185 Ethernet switch.
186
187config BNXT
188 tristate "Broadcom NetXtreme-C/E support"
189 depends on PCI
190 select FW_LOADER
191 select LIBCRC32C
192 ---help---
193 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
194 Ethernet cards. To compile this driver as a module, choose M here:
195 the module will be called bnxt_en. This is recommended.
196
197config BNXT_SRIOV
198 bool "Broadcom NetXtreme-C/E SR-IOV support"
199 depends on BNXT && PCI_IOV
200 default y
201 ---help---
202 This configuration parameter enables Single Root Input Output
203 Virtualization support in the NetXtreme-C/E products. This
204 allows for virtual function acceleration in virtual environments.
205
206config BNXT_DCB
207 bool "Data Center Bridging (DCB) Support"
208 default n
209 depends on BNXT && DCB
210 ---help---
211 Say Y here if you want to use Data Center Bridging (DCB) in the
212 driver.
213
214 If unsure, say N.
215
216endif # NET_VENDOR_BROADCOM
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Broadcom device configuration
4#
5
6config NET_VENDOR_BROADCOM
7 bool "Broadcom devices"
8 default y
9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
10 SIBYTE_SB1xxx_SOC
11 help
12 If you have a network (Ethernet) chipset belonging to this class,
13 say Y.
14
15 Note that the answer to this question does not directly affect
16 the kernel: saying N will just cause the configurator to skip all
17 the questions regarding Broadcom chipsets. If you say Y, you will
18 be asked for your specific chipset/driver in the following questions.
19
20if NET_VENDOR_BROADCOM
21
22config B44
23 tristate "Broadcom 440x/47xx ethernet support"
24 depends on SSB_POSSIBLE && HAS_DMA
25 select SSB
26 select MII
27 select PHYLIB
28 help
29 If you have a network (Ethernet) controller of this type, say Y
30 or M here.
31
32 To compile this driver as a module, choose M here. The module
33 will be called b44.
34
35# Auto-select SSB PCI-HOST support, if possible
36config B44_PCI_AUTOSELECT
37 bool
38 depends on B44 && SSB_PCIHOST_POSSIBLE
39 select SSB_PCIHOST
40 default y
41
42# Auto-select SSB PCICORE driver, if possible
43config B44_PCICORE_AUTOSELECT
44 bool
45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
46 select SSB_DRIVER_PCICORE
47 default y
48
49config B44_PCI
50 bool
51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
52 default y
53
54config BCM4908_ENET
55 tristate "Broadcom BCM4908 internal mac support"
56 depends on ARCH_BCM4908 || COMPILE_TEST
57 default y if ARCH_BCM4908
58 help
59 This driver supports Ethernet controller integrated into Broadcom
60 BCM4908 family SoCs.
61
62config BCM63XX_ENET
63 tristate "Broadcom 63xx internal mac support"
64 depends on BCM63XX
65 select MII
66 select PHYLIB
67 help
68 This driver supports the ethernet MACs in the Broadcom 63xx
69 MIPS chipset family (BCM63XX).
70
71config BCMGENET
72 tristate "Broadcom GENET internal MAC support"
73 depends on HAS_IOMEM
74 select MII
75 select PHYLIB
76 select FIXED_PHY
77 select BCM7XXX_PHY
78 select MDIO_BCM_UNIMAC
79 select DIMLIB
80 select BROADCOM_PHY if ARCH_BCM2835
81 help
82 This driver supports the built-in Ethernet MACs found in the
83 Broadcom BCM7xxx Set Top Box family chipset.
84
85config BNX2
86 tristate "QLogic bnx2 support"
87 depends on PCI
88 select CRC32
89 select FW_LOADER
90 help
91 This driver supports QLogic bnx2 gigabit Ethernet cards.
92
93 To compile this driver as a module, choose M here: the module
94 will be called bnx2. This is recommended.
95
96config CNIC
97 tristate "QLogic CNIC support"
98 depends on PCI && (IPV6 || IPV6=n)
99 depends on MMU
100 select BNX2
101 select UIO
102 help
103 This driver supports offload features of QLogic bnx2 gigabit
104 Ethernet cards.
105
106 To compile this driver as a module, choose M here: the module
107 will be called cnic. This is recommended.
108
109config SB1250_MAC
110 tristate "SB1250 Gigabit Ethernet support"
111 depends on SIBYTE_SB1xxx_SOC
112 select PHYLIB
113 help
114 This driver supports Gigabit Ethernet interfaces based on the
115 Broadcom SiByte family of System-On-a-Chip parts. They include
116 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
117 and BCM1480 chips.
118
119 To compile this driver as a module, choose M here: the module
120 will be called sb1250-mac.
121
122config TIGON3
123 tristate "Broadcom Tigon3 support"
124 depends on PCI
125 select PHYLIB
126 imply PTP_1588_CLOCK
127 help
128 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
129
130 To compile this driver as a module, choose M here: the module
131 will be called tg3. This is recommended.
132
133config TIGON3_HWMON
134 bool "Broadcom Tigon3 HWMON support"
135 default y
136 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
137 help
138 Say Y if you want to expose the thermal sensor on Tigon3 devices.
139
140config BNX2X
141 tristate "Broadcom NetXtremeII 10Gb support"
142 depends on PCI
143 imply PTP_1588_CLOCK
144 select FW_LOADER
145 select ZLIB_INFLATE
146 select LIBCRC32C
147 select MDIO
148 help
149 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
150 To compile this driver as a module, choose M here: the module
151 will be called bnx2x. This is recommended.
152
153config BNX2X_SRIOV
154 bool "Broadcom 578xx and 57712 SR-IOV support"
155 depends on BNX2X && PCI_IOV
156 default y
157 help
158 This configuration parameter enables Single Root Input Output
159 Virtualization support in the 578xx and 57712 products. This
160 allows for virtual function acceleration in virtual environments.
161
162config BGMAC
163 tristate
164 help
165 This enables the integrated ethernet controller support for many
166 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
167 needs to be enabled to select this.
168
169config BGMAC_BCMA
170 tristate "Broadcom iProc GBit BCMA support"
171 depends on BCMA && BCMA_HOST_SOC
172 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
173 select BGMAC
174 select PHYLIB
175 select FIXED_PHY
176 help
177 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
178 They can be found on BCM47xx SoCs and provide gigabit ethernet.
179 In case of using this driver on BCM4706 it's also requires to enable
180 BCMA_DRIVER_GMAC_CMN to make it work.
181
182config BGMAC_PLATFORM
183 tristate "Broadcom iProc GBit platform support"
184 depends on ARCH_BCM_IPROC || COMPILE_TEST
185 select BGMAC
186 select PHYLIB
187 select FIXED_PHY
188 default ARCH_BCM_IPROC
189 help
190 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
191 controller through the generic platform interface
192
193config SYSTEMPORT
194 tristate "Broadcom SYSTEMPORT internal MAC support"
195 depends on HAS_IOMEM
196 depends on NET_DSA || !NET_DSA
197 select MII
198 select PHYLIB
199 select FIXED_PHY
200 select DIMLIB
201 help
202 This driver supports the built-in Ethernet MACs found in the
203 Broadcom BCM7xxx Set Top Box family chipset using an internal
204 Ethernet switch.
205
206config BNXT
207 tristate "Broadcom NetXtreme-C/E support"
208 depends on PCI
209 imply PTP_1588_CLOCK
210 select FW_LOADER
211 select LIBCRC32C
212 select NET_DEVLINK
213 select PAGE_POOL
214 select DIMLIB
215 help
216 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
217 Ethernet cards. To compile this driver as a module, choose M here:
218 the module will be called bnxt_en. This is recommended.
219
220config BNXT_SRIOV
221 bool "Broadcom NetXtreme-C/E SR-IOV support"
222 depends on BNXT && PCI_IOV
223 default y
224 help
225 This configuration parameter enables Single Root Input Output
226 Virtualization support in the NetXtreme-C/E products. This
227 allows for virtual function acceleration in virtual environments.
228
229config BNXT_FLOWER_OFFLOAD
230 bool "TC Flower offload support for NetXtreme-C/E"
231 depends on BNXT
232 default y
233 help
234 This configuration parameter enables TC Flower packet classifier
235 offload for eswitch. This option enables SR-IOV switchdev eswitch
236 offload.
237
238config BNXT_DCB
239 bool "Data Center Bridging (DCB) Support"
240 default n
241 depends on BNXT && DCB
242 help
243 Say Y here if you want to use Data Center Bridging (DCB) in the
244 driver.
245
246 If unsure, say N.
247
248config BNXT_HWMON
249 bool "Broadcom NetXtreme-C/E HWMON support"
250 default y
251 depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
252 help
253 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
254 devices, via the hwmon sysfs interface.
255
256endif # NET_VENDOR_BROADCOM