Linux Audio

Check our new training course

Loading...
v4.10.11
  1/*
  2 * net/tipc/bearer.h: Include file for TIPC bearer code
  3 *
  4 * Copyright (c) 1996-2006, 2013-2016, Ericsson AB
  5 * Copyright (c) 2005, 2010-2011, Wind River Systems
  6 * All rights reserved.
  7 *
  8 * Redistribution and use in source and binary forms, with or without
  9 * modification, are permitted provided that the following conditions are met:
 10 *
 11 * 1. Redistributions of source code must retain the above copyright
 12 *    notice, this list of conditions and the following disclaimer.
 13 * 2. Redistributions in binary form must reproduce the above copyright
 14 *    notice, this list of conditions and the following disclaimer in the
 15 *    documentation and/or other materials provided with the distribution.
 16 * 3. Neither the names of the copyright holders nor the names of its
 17 *    contributors may be used to endorse or promote products derived from
 18 *    this software without specific prior written permission.
 19 *
 20 * Alternatively, this software may be distributed under the terms of the
 21 * GNU General Public License ("GPL") version 2 as published by the Free
 22 * Software Foundation.
 23 *
 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 34 * POSSIBILITY OF SUCH DAMAGE.
 35 */
 36
 37#ifndef _TIPC_BEARER_H
 38#define _TIPC_BEARER_H
 39
 40#include "netlink.h"
 41#include "core.h"
 42#include "msg.h"
 43#include <net/genetlink.h>
 44
 45#define MAX_MEDIA	3
 
 
 46
 47/* Identifiers associated with TIPC message header media address info
 48 * - address info field is 32 bytes long
 49 * - the field's actual content and length is defined per media
 50 * - remaining unused bytes in the field are set to zero
 51 */
 52#define TIPC_MEDIA_INFO_SIZE	32
 53#define TIPC_MEDIA_TYPE_OFFSET	3
 54#define TIPC_MEDIA_ADDR_OFFSET	4
 55
 56/*
 57 * Identifiers of supported TIPC media types
 58 */
 59#define TIPC_MEDIA_TYPE_ETH	1
 60#define TIPC_MEDIA_TYPE_IB	2
 61#define TIPC_MEDIA_TYPE_UDP	3
 62
 63/* minimum bearer MTU */
 64#define TIPC_MIN_BEARER_MTU	(MAX_H_SIZE + INT_H_SIZE)
 
 
 
 
 
 
 
 65
 66/**
 67 * struct tipc_media_addr - destination address used by TIPC bearers
 68 * @value: address info (format defined by media)
 69 * @media_id: TIPC media type identifier
 70 * @broadcast: non-zero if address is a broadcast address
 71 */
 72struct tipc_media_addr {
 73	u8 value[TIPC_MEDIA_INFO_SIZE];
 74	u8 media_id;
 75	u8 broadcast;
 76};
 77
 78struct tipc_bearer;
 79
 80/**
 81 * struct tipc_media - Media specific info exposed to generic bearer layer
 82 * @send_msg: routine which handles buffer transmission
 83 * @enable_media: routine which enables a media
 84 * @disable_media: routine which disables a media
 85 * @addr2str: convert media address format to string
 86 * @addr2msg: convert from media addr format to discovery msg addr format
 87 * @msg2addr: convert from discovery msg addr format to media addr format
 88 * @raw2addr: convert from raw addr format to media addr format
 89 * @priority: default link (and bearer) priority
 90 * @tolerance: default time (in ms) before declaring link failure
 91 * @window: default window (in packets) before declaring link congestion
 92 * @type_id: TIPC media identifier
 93 * @hwaddr_len: TIPC media address len
 94 * @name: media name
 95 */
 96struct tipc_media {
 97	int (*send_msg)(struct net *net, struct sk_buff *buf,
 98			struct tipc_bearer *b,
 99			struct tipc_media_addr *dest);
100	int (*enable_media)(struct net *net, struct tipc_bearer *b,
101			    struct nlattr *attr[]);
102	void (*disable_media)(struct tipc_bearer *b);
103	int (*addr2str)(struct tipc_media_addr *addr,
104			char *strbuf,
105			int bufsz);
106	int (*addr2msg)(char *msg, struct tipc_media_addr *addr);
107	int (*msg2addr)(struct tipc_bearer *b,
108			struct tipc_media_addr *addr,
109			char *msg);
110	int (*raw2addr)(struct tipc_bearer *b,
111			struct tipc_media_addr *addr,
112			char *raw);
113	u32 priority;
114	u32 tolerance;
115	u32 window;
116	u32 type_id;
117	u32 hwaddr_len;
118	char name[TIPC_MAX_MEDIA_NAME];
119};
120
121/**
122 * struct tipc_bearer - Generic TIPC bearer structure
123 * @media_ptr: pointer to additional media-specific information about bearer
124 * @mtu: max packet size bearer can support
125 * @addr: media-specific address associated with bearer
126 * @name: bearer name (format = media:interface)
127 * @media: ptr to media structure associated with bearer
128 * @bcast_addr: media address used in broadcasting
129 * @rcu: rcu struct for tipc_bearer
130 * @priority: default link priority for bearer
131 * @window: default window size for bearer
132 * @tolerance: default link tolerance for bearer
133 * @domain: network domain to which links can be established
134 * @identity: array index of this bearer within TIPC bearer array
135 * @link_req: ptr to (optional) structure making periodic link setup requests
136 * @net_plane: network plane ('A' through 'H') currently associated with bearer
 
137 *
138 * Note: media-specific code is responsible for initialization of the fields
139 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
140 * care of initializing all other fields.
141 */
142struct tipc_bearer {
143	void __rcu *media_ptr;			/* initalized by media */
144	u32 mtu;				/* initalized by media */
145	struct tipc_media_addr addr;		/* initalized by media */
146	char name[TIPC_MAX_BEARER_NAME];
147	struct tipc_media *media;
148	struct tipc_media_addr bcast_addr;
149	struct rcu_head rcu;
150	u32 priority;
151	u32 window;
152	u32 tolerance;
153	u32 domain;
154	u32 identity;
155	struct tipc_link_req *link_req;
156	char net_plane;
157	unsigned long up;
 
158};
159
160struct tipc_bearer_names {
161	char media_name[TIPC_MAX_MEDIA_NAME];
162	char if_name[TIPC_MAX_IF_NAME];
163};
164
165/*
166 * TIPC routines available to supported media types
167 */
168
169void tipc_rcv(struct net *net, struct sk_buff *skb, struct tipc_bearer *b);
170
171/*
172 * Routines made available to TIPC by supported media types
173 */
174extern struct tipc_media eth_media_info;
175
176#ifdef CONFIG_TIPC_MEDIA_IB
177extern struct tipc_media ib_media_info;
178#endif
179#ifdef CONFIG_TIPC_MEDIA_UDP
180extern struct tipc_media udp_media_info;
181#endif
182
183int tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info);
184int tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info);
185int tipc_nl_bearer_dump(struct sk_buff *skb, struct netlink_callback *cb);
186int tipc_nl_bearer_get(struct sk_buff *skb, struct genl_info *info);
187int tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info);
188int tipc_nl_bearer_add(struct sk_buff *skb, struct genl_info *info);
189
190int tipc_nl_media_dump(struct sk_buff *skb, struct netlink_callback *cb);
191int tipc_nl_media_get(struct sk_buff *skb, struct genl_info *info);
192int tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info);
193
194int tipc_media_set_priority(const char *name, u32 new_value);
195int tipc_media_set_window(const char *name, u32 new_value);
196void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
197int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b,
198			 struct nlattr *attrs[]);
199void tipc_disable_l2_media(struct tipc_bearer *b);
200int tipc_l2_send_msg(struct net *net, struct sk_buff *buf,
201		     struct tipc_bearer *b, struct tipc_media_addr *dest);
202
203void tipc_bearer_add_dest(struct net *net, u32 bearer_id, u32 dest);
204void tipc_bearer_remove_dest(struct net *net, u32 bearer_id, u32 dest);
205struct tipc_bearer *tipc_bearer_find(struct net *net, const char *name);
206int tipc_bearer_get_name(struct net *net, char *name, u32 bearer_id);
207struct tipc_media *tipc_media_find(const char *name);
208void tipc_bearer_reset_all(struct net *net);
209int tipc_bearer_setup(void);
210void tipc_bearer_cleanup(void);
211void tipc_bearer_stop(struct net *net);
212int tipc_bearer_mtu(struct net *net, u32 bearer_id);
213void tipc_bearer_xmit_skb(struct net *net, u32 bearer_id,
214			  struct sk_buff *skb,
215			  struct tipc_media_addr *dest);
216void tipc_bearer_xmit(struct net *net, u32 bearer_id,
217		      struct sk_buff_head *xmitq,
218		      struct tipc_media_addr *dst);
219void tipc_bearer_bc_xmit(struct net *net, u32 bearer_id,
220			 struct sk_buff_head *xmitq);
221
222/* check if device MTU is too low for tipc headers */
223static inline bool tipc_mtu_bad(struct net_device *dev, unsigned int reserve)
224{
225	if (dev->mtu >= TIPC_MIN_BEARER_MTU + reserve)
226		return false;
227	netdev_warn(dev, "MTU too low for tipc bearer\n");
228	return true;
229}
230
231#endif	/* _TIPC_BEARER_H */
v4.6
  1/*
  2 * net/tipc/bearer.h: Include file for TIPC bearer code
  3 *
  4 * Copyright (c) 1996-2006, 2013-2014, Ericsson AB
  5 * Copyright (c) 2005, 2010-2011, Wind River Systems
  6 * All rights reserved.
  7 *
  8 * Redistribution and use in source and binary forms, with or without
  9 * modification, are permitted provided that the following conditions are met:
 10 *
 11 * 1. Redistributions of source code must retain the above copyright
 12 *    notice, this list of conditions and the following disclaimer.
 13 * 2. Redistributions in binary form must reproduce the above copyright
 14 *    notice, this list of conditions and the following disclaimer in the
 15 *    documentation and/or other materials provided with the distribution.
 16 * 3. Neither the names of the copyright holders nor the names of its
 17 *    contributors may be used to endorse or promote products derived from
 18 *    this software without specific prior written permission.
 19 *
 20 * Alternatively, this software may be distributed under the terms of the
 21 * GNU General Public License ("GPL") version 2 as published by the Free
 22 * Software Foundation.
 23 *
 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 34 * POSSIBILITY OF SUCH DAMAGE.
 35 */
 36
 37#ifndef _TIPC_BEARER_H
 38#define _TIPC_BEARER_H
 39
 40#include "netlink.h"
 41#include "core.h"
 
 42#include <net/genetlink.h>
 43
 44#define MAX_MEDIA	3
 45#define MAX_NODES	4096
 46#define WSIZE		32
 47
 48/* Identifiers associated with TIPC message header media address info
 49 * - address info field is 32 bytes long
 50 * - the field's actual content and length is defined per media
 51 * - remaining unused bytes in the field are set to zero
 52 */
 53#define TIPC_MEDIA_INFO_SIZE	32
 54#define TIPC_MEDIA_TYPE_OFFSET	3
 55#define TIPC_MEDIA_ADDR_OFFSET	4
 56
 57/*
 58 * Identifiers of supported TIPC media types
 59 */
 60#define TIPC_MEDIA_TYPE_ETH	1
 61#define TIPC_MEDIA_TYPE_IB	2
 62#define TIPC_MEDIA_TYPE_UDP	3
 63
 64/**
 65 * struct tipc_node_map - set of node identifiers
 66 * @count: # of nodes in set
 67 * @map: bitmap of node identifiers that are in the set
 68 */
 69struct tipc_node_map {
 70	u32 count;
 71	u32 map[MAX_NODES / WSIZE];
 72};
 73
 74/**
 75 * struct tipc_media_addr - destination address used by TIPC bearers
 76 * @value: address info (format defined by media)
 77 * @media_id: TIPC media type identifier
 78 * @broadcast: non-zero if address is a broadcast address
 79 */
 80struct tipc_media_addr {
 81	u8 value[TIPC_MEDIA_INFO_SIZE];
 82	u8 media_id;
 83	u8 broadcast;
 84};
 85
 86struct tipc_bearer;
 87
 88/**
 89 * struct tipc_media - Media specific info exposed to generic bearer layer
 90 * @send_msg: routine which handles buffer transmission
 91 * @enable_media: routine which enables a media
 92 * @disable_media: routine which disables a media
 93 * @addr2str: convert media address format to string
 94 * @addr2msg: convert from media addr format to discovery msg addr format
 95 * @msg2addr: convert from discovery msg addr format to media addr format
 96 * @raw2addr: convert from raw addr format to media addr format
 97 * @priority: default link (and bearer) priority
 98 * @tolerance: default time (in ms) before declaring link failure
 99 * @window: default window (in packets) before declaring link congestion
100 * @type_id: TIPC media identifier
101 * @hwaddr_len: TIPC media address len
102 * @name: media name
103 */
104struct tipc_media {
105	int (*send_msg)(struct net *net, struct sk_buff *buf,
106			struct tipc_bearer *b,
107			struct tipc_media_addr *dest);
108	int (*enable_media)(struct net *net, struct tipc_bearer *b,
109			    struct nlattr *attr[]);
110	void (*disable_media)(struct tipc_bearer *b);
111	int (*addr2str)(struct tipc_media_addr *addr,
112			char *strbuf,
113			int bufsz);
114	int (*addr2msg)(char *msg, struct tipc_media_addr *addr);
115	int (*msg2addr)(struct tipc_bearer *b,
116			struct tipc_media_addr *addr,
117			char *msg);
118	int (*raw2addr)(struct tipc_bearer *b,
119			struct tipc_media_addr *addr,
120			char *raw);
121	u32 priority;
122	u32 tolerance;
123	u32 window;
124	u32 type_id;
125	u32 hwaddr_len;
126	char name[TIPC_MAX_MEDIA_NAME];
127};
128
129/**
130 * struct tipc_bearer - Generic TIPC bearer structure
131 * @media_ptr: pointer to additional media-specific information about bearer
132 * @mtu: max packet size bearer can support
133 * @addr: media-specific address associated with bearer
134 * @name: bearer name (format = media:interface)
135 * @media: ptr to media structure associated with bearer
136 * @bcast_addr: media address used in broadcasting
137 * @rcu: rcu struct for tipc_bearer
138 * @priority: default link priority for bearer
139 * @window: default window size for bearer
140 * @tolerance: default link tolerance for bearer
141 * @domain: network domain to which links can be established
142 * @identity: array index of this bearer within TIPC bearer array
143 * @link_req: ptr to (optional) structure making periodic link setup requests
144 * @net_plane: network plane ('A' through 'H') currently associated with bearer
145 * @nodes: indicates which nodes in cluster can be reached through bearer
146 *
147 * Note: media-specific code is responsible for initialization of the fields
148 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
149 * care of initializing all other fields.
150 */
151struct tipc_bearer {
152	void __rcu *media_ptr;			/* initalized by media */
153	u32 mtu;				/* initalized by media */
154	struct tipc_media_addr addr;		/* initalized by media */
155	char name[TIPC_MAX_BEARER_NAME];
156	struct tipc_media *media;
157	struct tipc_media_addr bcast_addr;
158	struct rcu_head rcu;
159	u32 priority;
160	u32 window;
161	u32 tolerance;
162	u32 domain;
163	u32 identity;
164	struct tipc_link_req *link_req;
165	char net_plane;
166	int node_cnt;
167	struct tipc_node_map nodes;
168};
169
170struct tipc_bearer_names {
171	char media_name[TIPC_MAX_MEDIA_NAME];
172	char if_name[TIPC_MAX_IF_NAME];
173};
174
175/*
176 * TIPC routines available to supported media types
177 */
178
179void tipc_rcv(struct net *net, struct sk_buff *skb, struct tipc_bearer *b);
180
181/*
182 * Routines made available to TIPC by supported media types
183 */
184extern struct tipc_media eth_media_info;
185
186#ifdef CONFIG_TIPC_MEDIA_IB
187extern struct tipc_media ib_media_info;
188#endif
189#ifdef CONFIG_TIPC_MEDIA_UDP
190extern struct tipc_media udp_media_info;
191#endif
192
193int tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info);
194int tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info);
195int tipc_nl_bearer_dump(struct sk_buff *skb, struct netlink_callback *cb);
196int tipc_nl_bearer_get(struct sk_buff *skb, struct genl_info *info);
197int tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info);
 
198
199int tipc_nl_media_dump(struct sk_buff *skb, struct netlink_callback *cb);
200int tipc_nl_media_get(struct sk_buff *skb, struct genl_info *info);
201int tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info);
202
203int tipc_media_set_priority(const char *name, u32 new_value);
204int tipc_media_set_window(const char *name, u32 new_value);
205void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
206int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b,
207			 struct nlattr *attrs[]);
208void tipc_disable_l2_media(struct tipc_bearer *b);
209int tipc_l2_send_msg(struct net *net, struct sk_buff *buf,
210		     struct tipc_bearer *b, struct tipc_media_addr *dest);
211
212void tipc_bearer_add_dest(struct net *net, u32 bearer_id, u32 dest);
213void tipc_bearer_remove_dest(struct net *net, u32 bearer_id, u32 dest);
214struct tipc_bearer *tipc_bearer_find(struct net *net, const char *name);
 
215struct tipc_media *tipc_media_find(const char *name);
 
216int tipc_bearer_setup(void);
217void tipc_bearer_cleanup(void);
218void tipc_bearer_stop(struct net *net);
219int tipc_bearer_mtu(struct net *net, u32 bearer_id);
220void tipc_bearer_xmit_skb(struct net *net, u32 bearer_id,
221			  struct sk_buff *skb,
222			  struct tipc_media_addr *dest);
223void tipc_bearer_xmit(struct net *net, u32 bearer_id,
224		      struct sk_buff_head *xmitq,
225		      struct tipc_media_addr *dst);
226void tipc_bearer_bc_xmit(struct net *net, u32 bearer_id,
227			 struct sk_buff_head *xmitq);
 
 
 
 
 
 
 
 
 
228
229#endif	/* _TIPC_BEARER_H */