Loading...
1/*
2 * net/tipc/bearer.h: Include file for TIPC bearer code
3 *
4 * Copyright (c) 1996-2006, 2013-2016, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#ifndef _TIPC_BEARER_H
38#define _TIPC_BEARER_H
39
40#include "netlink.h"
41#include "core.h"
42#include "msg.h"
43#include <net/genetlink.h>
44
45#define MAX_MEDIA 3
46
47/* Identifiers associated with TIPC message header media address info
48 * - address info field is 32 bytes long
49 * - the field's actual content and length is defined per media
50 * - remaining unused bytes in the field are set to zero
51 */
52#define TIPC_MEDIA_INFO_SIZE 32
53#define TIPC_MEDIA_TYPE_OFFSET 3
54#define TIPC_MEDIA_ADDR_OFFSET 4
55
56/*
57 * Identifiers of supported TIPC media types
58 */
59#define TIPC_MEDIA_TYPE_ETH 1
60#define TIPC_MEDIA_TYPE_IB 2
61#define TIPC_MEDIA_TYPE_UDP 3
62
63/* minimum bearer MTU */
64#define TIPC_MIN_BEARER_MTU (MAX_H_SIZE + INT_H_SIZE)
65
66/**
67 * struct tipc_media_addr - destination address used by TIPC bearers
68 * @value: address info (format defined by media)
69 * @media_id: TIPC media type identifier
70 * @broadcast: non-zero if address is a broadcast address
71 */
72struct tipc_media_addr {
73 u8 value[TIPC_MEDIA_INFO_SIZE];
74 u8 media_id;
75 u8 broadcast;
76};
77
78struct tipc_bearer;
79
80/**
81 * struct tipc_media - Media specific info exposed to generic bearer layer
82 * @send_msg: routine which handles buffer transmission
83 * @enable_media: routine which enables a media
84 * @disable_media: routine which disables a media
85 * @addr2str: convert media address format to string
86 * @addr2msg: convert from media addr format to discovery msg addr format
87 * @msg2addr: convert from discovery msg addr format to media addr format
88 * @raw2addr: convert from raw addr format to media addr format
89 * @priority: default link (and bearer) priority
90 * @tolerance: default time (in ms) before declaring link failure
91 * @window: default window (in packets) before declaring link congestion
92 * @type_id: TIPC media identifier
93 * @hwaddr_len: TIPC media address len
94 * @name: media name
95 */
96struct tipc_media {
97 int (*send_msg)(struct net *net, struct sk_buff *buf,
98 struct tipc_bearer *b,
99 struct tipc_media_addr *dest);
100 int (*enable_media)(struct net *net, struct tipc_bearer *b,
101 struct nlattr *attr[]);
102 void (*disable_media)(struct tipc_bearer *b);
103 int (*addr2str)(struct tipc_media_addr *addr,
104 char *strbuf,
105 int bufsz);
106 int (*addr2msg)(char *msg, struct tipc_media_addr *addr);
107 int (*msg2addr)(struct tipc_bearer *b,
108 struct tipc_media_addr *addr,
109 char *msg);
110 int (*raw2addr)(struct tipc_bearer *b,
111 struct tipc_media_addr *addr,
112 char *raw);
113 u32 priority;
114 u32 tolerance;
115 u32 window;
116 u32 type_id;
117 u32 hwaddr_len;
118 char name[TIPC_MAX_MEDIA_NAME];
119};
120
121/**
122 * struct tipc_bearer - Generic TIPC bearer structure
123 * @media_ptr: pointer to additional media-specific information about bearer
124 * @mtu: max packet size bearer can support
125 * @addr: media-specific address associated with bearer
126 * @name: bearer name (format = media:interface)
127 * @media: ptr to media structure associated with bearer
128 * @bcast_addr: media address used in broadcasting
129 * @rcu: rcu struct for tipc_bearer
130 * @priority: default link priority for bearer
131 * @window: default window size for bearer
132 * @tolerance: default link tolerance for bearer
133 * @domain: network domain to which links can be established
134 * @identity: array index of this bearer within TIPC bearer array
135 * @link_req: ptr to (optional) structure making periodic link setup requests
136 * @net_plane: network plane ('A' through 'H') currently associated with bearer
137 *
138 * Note: media-specific code is responsible for initialization of the fields
139 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
140 * care of initializing all other fields.
141 */
142struct tipc_bearer {
143 void __rcu *media_ptr; /* initalized by media */
144 u32 mtu; /* initalized by media */
145 struct tipc_media_addr addr; /* initalized by media */
146 char name[TIPC_MAX_BEARER_NAME];
147 struct tipc_media *media;
148 struct tipc_media_addr bcast_addr;
149 struct rcu_head rcu;
150 u32 priority;
151 u32 window;
152 u32 tolerance;
153 u32 domain;
154 u32 identity;
155 struct tipc_link_req *link_req;
156 char net_plane;
157 unsigned long up;
158};
159
160struct tipc_bearer_names {
161 char media_name[TIPC_MAX_MEDIA_NAME];
162 char if_name[TIPC_MAX_IF_NAME];
163};
164
165/*
166 * TIPC routines available to supported media types
167 */
168
169void tipc_rcv(struct net *net, struct sk_buff *skb, struct tipc_bearer *b);
170
171/*
172 * Routines made available to TIPC by supported media types
173 */
174extern struct tipc_media eth_media_info;
175
176#ifdef CONFIG_TIPC_MEDIA_IB
177extern struct tipc_media ib_media_info;
178#endif
179#ifdef CONFIG_TIPC_MEDIA_UDP
180extern struct tipc_media udp_media_info;
181#endif
182
183int tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info);
184int tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info);
185int tipc_nl_bearer_dump(struct sk_buff *skb, struct netlink_callback *cb);
186int tipc_nl_bearer_get(struct sk_buff *skb, struct genl_info *info);
187int tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info);
188int tipc_nl_bearer_add(struct sk_buff *skb, struct genl_info *info);
189
190int tipc_nl_media_dump(struct sk_buff *skb, struct netlink_callback *cb);
191int tipc_nl_media_get(struct sk_buff *skb, struct genl_info *info);
192int tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info);
193
194int tipc_media_set_priority(const char *name, u32 new_value);
195int tipc_media_set_window(const char *name, u32 new_value);
196void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
197int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b,
198 struct nlattr *attrs[]);
199void tipc_disable_l2_media(struct tipc_bearer *b);
200int tipc_l2_send_msg(struct net *net, struct sk_buff *buf,
201 struct tipc_bearer *b, struct tipc_media_addr *dest);
202
203void tipc_bearer_add_dest(struct net *net, u32 bearer_id, u32 dest);
204void tipc_bearer_remove_dest(struct net *net, u32 bearer_id, u32 dest);
205struct tipc_bearer *tipc_bearer_find(struct net *net, const char *name);
206int tipc_bearer_get_name(struct net *net, char *name, u32 bearer_id);
207struct tipc_media *tipc_media_find(const char *name);
208void tipc_bearer_reset_all(struct net *net);
209int tipc_bearer_setup(void);
210void tipc_bearer_cleanup(void);
211void tipc_bearer_stop(struct net *net);
212int tipc_bearer_mtu(struct net *net, u32 bearer_id);
213void tipc_bearer_xmit_skb(struct net *net, u32 bearer_id,
214 struct sk_buff *skb,
215 struct tipc_media_addr *dest);
216void tipc_bearer_xmit(struct net *net, u32 bearer_id,
217 struct sk_buff_head *xmitq,
218 struct tipc_media_addr *dst);
219void tipc_bearer_bc_xmit(struct net *net, u32 bearer_id,
220 struct sk_buff_head *xmitq);
221
222/* check if device MTU is too low for tipc headers */
223static inline bool tipc_mtu_bad(struct net_device *dev, unsigned int reserve)
224{
225 if (dev->mtu >= TIPC_MIN_BEARER_MTU + reserve)
226 return false;
227 netdev_warn(dev, "MTU too low for tipc bearer\n");
228 return true;
229}
230
231#endif /* _TIPC_BEARER_H */
1/*
2 * net/tipc/bearer.h: Include file for TIPC bearer code
3 *
4 * Copyright (c) 1996-2006, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#ifndef _TIPC_BEARER_H
38#define _TIPC_BEARER_H
39
40#include "bcast.h"
41
42#define MAX_BEARERS 8
43#define MAX_MEDIA 4
44
45/*
46 * Identifiers of supported TIPC media types
47 */
48#define TIPC_MEDIA_TYPE_ETH 1
49
50/*
51 * Destination address structure used by TIPC bearers when sending messages
52 *
53 * IMPORTANT: The fields of this structure MUST be stored using the specified
54 * byte order indicated below, as the structure is exchanged between nodes
55 * as part of a link setup process.
56 */
57struct tipc_media_addr {
58 __be32 type; /* bearer type (network byte order) */
59 union {
60 __u8 eth_addr[6]; /* 48 bit Ethernet addr (byte array) */
61 } dev_addr;
62};
63
64struct tipc_bearer;
65
66/**
67 * struct media - TIPC media information available to internal users
68 * @send_msg: routine which handles buffer transmission
69 * @enable_bearer: routine which enables a bearer
70 * @disable_bearer: routine which disables a bearer
71 * @addr2str: routine which converts bearer's address to string form
72 * @bcast_addr: media address used in broadcasting
73 * @priority: default link (and bearer) priority
74 * @tolerance: default time (in ms) before declaring link failure
75 * @window: default window (in packets) before declaring link congestion
76 * @type_id: TIPC media identifier
77 * @name: media name
78 */
79
80struct media {
81 int (*send_msg)(struct sk_buff *buf,
82 struct tipc_bearer *b_ptr,
83 struct tipc_media_addr *dest);
84 int (*enable_bearer)(struct tipc_bearer *b_ptr);
85 void (*disable_bearer)(struct tipc_bearer *b_ptr);
86 char *(*addr2str)(struct tipc_media_addr *a,
87 char *str_buf, int str_size);
88 struct tipc_media_addr bcast_addr;
89 u32 priority;
90 u32 tolerance;
91 u32 window;
92 u32 type_id;
93 char name[TIPC_MAX_MEDIA_NAME];
94};
95
96/**
97 * struct tipc_bearer - TIPC bearer structure
98 * @usr_handle: pointer to additional media-specific information about bearer
99 * @mtu: max packet size bearer can support
100 * @blocked: non-zero if bearer is blocked
101 * @lock: spinlock for controlling access to bearer
102 * @addr: media-specific address associated with bearer
103 * @name: bearer name (format = media:interface)
104 * @media: ptr to media structure associated with bearer
105 * @priority: default link priority for bearer
106 * @identity: array index of this bearer within TIPC bearer array
107 * @link_req: ptr to (optional) structure making periodic link setup requests
108 * @links: list of non-congested links associated with bearer
109 * @cong_links: list of congested links associated with bearer
110 * @active: non-zero if bearer structure is represents a bearer
111 * @net_plane: network plane ('A' through 'H') currently associated with bearer
112 * @nodes: indicates which nodes in cluster can be reached through bearer
113 *
114 * Note: media-specific code is responsible for initialization of the fields
115 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
116 * care of initializing all other fields.
117 */
118struct tipc_bearer {
119 void *usr_handle; /* initalized by media */
120 u32 mtu; /* initalized by media */
121 int blocked; /* initalized by media */
122 struct tipc_media_addr addr; /* initalized by media */
123 char name[TIPC_MAX_BEARER_NAME];
124 spinlock_t lock;
125 struct media *media;
126 u32 priority;
127 u32 identity;
128 struct link_req *link_req;
129 struct list_head links;
130 struct list_head cong_links;
131 int active;
132 char net_plane;
133 struct tipc_node_map nodes;
134};
135
136struct bearer_name {
137 char media_name[TIPC_MAX_MEDIA_NAME];
138 char if_name[TIPC_MAX_IF_NAME];
139};
140
141struct link;
142
143extern struct tipc_bearer tipc_bearers[];
144
145/*
146 * TIPC routines available to supported media types
147 */
148int tipc_register_media(u32 media_type,
149 char *media_name, int (*enable)(struct tipc_bearer *),
150 void (*disable)(struct tipc_bearer *),
151 int (*send_msg)(struct sk_buff *,
152 struct tipc_bearer *, struct tipc_media_addr *),
153 char *(*addr2str)(struct tipc_media_addr *a,
154 char *str_buf, int str_size),
155 struct tipc_media_addr *bcast_addr, const u32 bearer_priority,
156 const u32 link_tolerance, /* [ms] */
157 const u32 send_window_limit);
158
159void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
160
161int tipc_block_bearer(const char *name);
162void tipc_continue(struct tipc_bearer *tb_ptr);
163
164int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
165int tipc_disable_bearer(const char *name);
166
167/*
168 * Routines made available to TIPC by supported media types
169 */
170int tipc_eth_media_start(void);
171void tipc_eth_media_stop(void);
172
173void tipc_media_addr_printf(struct print_buf *pb, struct tipc_media_addr *a);
174struct sk_buff *tipc_media_get_names(void);
175
176struct sk_buff *tipc_bearer_get_names(void);
177void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest);
178void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest);
179void tipc_bearer_schedule(struct tipc_bearer *b_ptr, struct link *l_ptr);
180struct tipc_bearer *tipc_bearer_find_interface(const char *if_name);
181int tipc_bearer_resolve_congestion(struct tipc_bearer *b_ptr, struct link *l_ptr);
182int tipc_bearer_congested(struct tipc_bearer *b_ptr, struct link *l_ptr);
183void tipc_bearer_stop(void);
184void tipc_bearer_lock_push(struct tipc_bearer *b_ptr);
185
186
187/**
188 * tipc_bearer_send- sends buffer to destination over bearer
189 *
190 * Returns true (1) if successful, or false (0) if unable to send
191 *
192 * IMPORTANT:
193 * The media send routine must not alter the buffer being passed in
194 * as it may be needed for later retransmission!
195 *
196 * If the media send routine returns a non-zero value (indicating that
197 * it was unable to send the buffer), it must:
198 * 1) mark the bearer as blocked,
199 * 2) call tipc_continue() once the bearer is able to send again.
200 * Media types that are unable to meet these two critera must ensure their
201 * send routine always returns success -- even if the buffer was not sent --
202 * and let TIPC's link code deal with the undelivered message.
203 */
204
205static inline int tipc_bearer_send(struct tipc_bearer *b_ptr,
206 struct sk_buff *buf,
207 struct tipc_media_addr *dest)
208{
209 return !b_ptr->media->send_msg(buf, b_ptr, dest);
210}
211
212#endif /* _TIPC_BEARER_H */