Loading...
1#
2# Architectures that offer an FUNCTION_TRACER implementation should
3# select HAVE_FUNCTION_TRACER:
4#
5
6config USER_STACKTRACE_SUPPORT
7 bool
8
9config NOP_TRACER
10 bool
11
12config HAVE_FTRACE_NMI_ENTER
13 bool
14 help
15 See Documentation/trace/ftrace-design.txt
16
17config HAVE_FUNCTION_TRACER
18 bool
19 help
20 See Documentation/trace/ftrace-design.txt
21
22config HAVE_FUNCTION_GRAPH_TRACER
23 bool
24 help
25 See Documentation/trace/ftrace-design.txt
26
27config HAVE_FUNCTION_GRAPH_FP_TEST
28 bool
29 help
30 See Documentation/trace/ftrace-design.txt
31
32config HAVE_FUNCTION_TRACE_MCOUNT_TEST
33 bool
34 help
35 See Documentation/trace/ftrace-design.txt
36
37config HAVE_DYNAMIC_FTRACE
38 bool
39 help
40 See Documentation/trace/ftrace-design.txt
41
42config HAVE_FTRACE_MCOUNT_RECORD
43 bool
44 help
45 See Documentation/trace/ftrace-design.txt
46
47config HAVE_SYSCALL_TRACEPOINTS
48 bool
49 help
50 See Documentation/trace/ftrace-design.txt
51
52config HAVE_C_RECORDMCOUNT
53 bool
54 help
55 C version of recordmcount available?
56
57config TRACER_MAX_TRACE
58 bool
59
60config RING_BUFFER
61 bool
62
63config FTRACE_NMI_ENTER
64 bool
65 depends on HAVE_FTRACE_NMI_ENTER
66 default y
67
68config EVENT_TRACING
69 select CONTEXT_SWITCH_TRACER
70 bool
71
72config EVENT_POWER_TRACING_DEPRECATED
73 depends on EVENT_TRACING
74 bool "Deprecated power event trace API, to be removed"
75 default y
76 help
77 Provides old power event types:
78 C-state/idle accounting events:
79 power:power_start
80 power:power_end
81 and old cpufreq accounting event:
82 power:power_frequency
83 This is for userspace compatibility
84 and will vanish after 5 kernel iterations,
85 namely 3.1.
86
87config CONTEXT_SWITCH_TRACER
88 bool
89
90config RING_BUFFER_ALLOW_SWAP
91 bool
92 help
93 Allow the use of ring_buffer_swap_cpu.
94 Adds a very slight overhead to tracing when enabled.
95
96# All tracer options should select GENERIC_TRACER. For those options that are
97# enabled by all tracers (context switch and event tracer) they select TRACING.
98# This allows those options to appear when no other tracer is selected. But the
99# options do not appear when something else selects it. We need the two options
100# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
101# hiding of the automatic options.
102
103config TRACING
104 bool
105 select DEBUG_FS
106 select RING_BUFFER
107 select STACKTRACE if STACKTRACE_SUPPORT
108 select TRACEPOINTS
109 select NOP_TRACER
110 select BINARY_PRINTF
111 select EVENT_TRACING
112
113config GENERIC_TRACER
114 bool
115 select TRACING
116
117#
118# Minimum requirements an architecture has to meet for us to
119# be able to offer generic tracing facilities:
120#
121config TRACING_SUPPORT
122 bool
123 # PPC32 has no irqflags tracing support, but it can use most of the
124 # tracers anyway, they were tested to build and work. Note that new
125 # exceptions to this list aren't welcomed, better implement the
126 # irqflags tracing for your architecture.
127 depends on TRACE_IRQFLAGS_SUPPORT || PPC32
128 depends on STACKTRACE_SUPPORT
129 default y
130
131if TRACING_SUPPORT
132
133menuconfig FTRACE
134 bool "Tracers"
135 default y if DEBUG_KERNEL
136 help
137 Enable the kernel tracing infrastructure.
138
139if FTRACE
140
141config FUNCTION_TRACER
142 bool "Kernel Function Tracer"
143 depends on HAVE_FUNCTION_TRACER
144 select KALLSYMS
145 select GENERIC_TRACER
146 select CONTEXT_SWITCH_TRACER
147 help
148 Enable the kernel to trace every kernel function. This is done
149 by using a compiler feature to insert a small, 5-byte No-Operation
150 instruction at the beginning of every kernel function, which NOP
151 sequence is then dynamically patched into a tracer call when
152 tracing is enabled by the administrator. If it's runtime disabled
153 (the bootup default), then the overhead of the instructions is very
154 small and not measurable even in micro-benchmarks.
155
156config FUNCTION_GRAPH_TRACER
157 bool "Kernel Function Graph Tracer"
158 depends on HAVE_FUNCTION_GRAPH_TRACER
159 depends on FUNCTION_TRACER
160 depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE
161 default y
162 help
163 Enable the kernel to trace a function at both its return
164 and its entry.
165 Its first purpose is to trace the duration of functions and
166 draw a call graph for each thread with some information like
167 the return value. This is done by setting the current return
168 address on the current task structure into a stack of calls.
169
170
171config IRQSOFF_TRACER
172 bool "Interrupts-off Latency Tracer"
173 default n
174 depends on TRACE_IRQFLAGS_SUPPORT
175 depends on !ARCH_USES_GETTIMEOFFSET
176 select TRACE_IRQFLAGS
177 select GENERIC_TRACER
178 select TRACER_MAX_TRACE
179 select RING_BUFFER_ALLOW_SWAP
180 help
181 This option measures the time spent in irqs-off critical
182 sections, with microsecond accuracy.
183
184 The default measurement method is a maximum search, which is
185 disabled by default and can be runtime (re-)started
186 via:
187
188 echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
189
190 (Note that kernel size and overhead increase with this option
191 enabled. This option and the preempt-off timing option can be
192 used together or separately.)
193
194config PREEMPT_TRACER
195 bool "Preemption-off Latency Tracer"
196 default n
197 depends on !ARCH_USES_GETTIMEOFFSET
198 depends on PREEMPT
199 select GENERIC_TRACER
200 select TRACER_MAX_TRACE
201 select RING_BUFFER_ALLOW_SWAP
202 help
203 This option measures the time spent in preemption-off critical
204 sections, with microsecond accuracy.
205
206 The default measurement method is a maximum search, which is
207 disabled by default and can be runtime (re-)started
208 via:
209
210 echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
211
212 (Note that kernel size and overhead increase with this option
213 enabled. This option and the irqs-off timing option can be
214 used together or separately.)
215
216config SCHED_TRACER
217 bool "Scheduling Latency Tracer"
218 select GENERIC_TRACER
219 select CONTEXT_SWITCH_TRACER
220 select TRACER_MAX_TRACE
221 help
222 This tracer tracks the latency of the highest priority task
223 to be scheduled in, starting from the point it has woken up.
224
225config ENABLE_DEFAULT_TRACERS
226 bool "Trace process context switches and events"
227 depends on !GENERIC_TRACER
228 select TRACING
229 help
230 This tracer hooks to various trace points in the kernel,
231 allowing the user to pick and choose which trace point they
232 want to trace. It also includes the sched_switch tracer plugin.
233
234config FTRACE_SYSCALLS
235 bool "Trace syscalls"
236 depends on HAVE_SYSCALL_TRACEPOINTS
237 select GENERIC_TRACER
238 select KALLSYMS
239 help
240 Basic tracer to catch the syscall entry and exit events.
241
242config TRACE_BRANCH_PROFILING
243 bool
244 select GENERIC_TRACER
245
246choice
247 prompt "Branch Profiling"
248 default BRANCH_PROFILE_NONE
249 help
250 The branch profiling is a software profiler. It will add hooks
251 into the C conditionals to test which path a branch takes.
252
253 The likely/unlikely profiler only looks at the conditions that
254 are annotated with a likely or unlikely macro.
255
256 The "all branch" profiler will profile every if-statement in the
257 kernel. This profiler will also enable the likely/unlikely
258 profiler.
259
260 Either of the above profilers adds a bit of overhead to the system.
261 If unsure, choose "No branch profiling".
262
263config BRANCH_PROFILE_NONE
264 bool "No branch profiling"
265 help
266 No branch profiling. Branch profiling adds a bit of overhead.
267 Only enable it if you want to analyse the branching behavior.
268 Otherwise keep it disabled.
269
270config PROFILE_ANNOTATED_BRANCHES
271 bool "Trace likely/unlikely profiler"
272 select TRACE_BRANCH_PROFILING
273 help
274 This tracer profiles all likely and unlikely macros
275 in the kernel. It will display the results in:
276
277 /sys/kernel/debug/tracing/trace_stat/branch_annotated
278
279 Note: this will add a significant overhead; only turn this
280 on if you need to profile the system's use of these macros.
281
282config PROFILE_ALL_BRANCHES
283 bool "Profile all if conditionals"
284 select TRACE_BRANCH_PROFILING
285 help
286 This tracer profiles all branch conditions. Every if ()
287 taken in the kernel is recorded whether it hit or miss.
288 The results will be displayed in:
289
290 /sys/kernel/debug/tracing/trace_stat/branch_all
291
292 This option also enables the likely/unlikely profiler.
293
294 This configuration, when enabled, will impose a great overhead
295 on the system. This should only be enabled when the system
296 is to be analyzed in much detail.
297endchoice
298
299config TRACING_BRANCHES
300 bool
301 help
302 Selected by tracers that will trace the likely and unlikely
303 conditions. This prevents the tracers themselves from being
304 profiled. Profiling the tracing infrastructure can only happen
305 when the likelys and unlikelys are not being traced.
306
307config BRANCH_TRACER
308 bool "Trace likely/unlikely instances"
309 depends on TRACE_BRANCH_PROFILING
310 select TRACING_BRANCHES
311 help
312 This traces the events of likely and unlikely condition
313 calls in the kernel. The difference between this and the
314 "Trace likely/unlikely profiler" is that this is not a
315 histogram of the callers, but actually places the calling
316 events into a running trace buffer to see when and where the
317 events happened, as well as their results.
318
319 Say N if unsure.
320
321config STACK_TRACER
322 bool "Trace max stack"
323 depends on HAVE_FUNCTION_TRACER
324 select FUNCTION_TRACER
325 select STACKTRACE
326 select KALLSYMS
327 help
328 This special tracer records the maximum stack footprint of the
329 kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
330
331 This tracer works by hooking into every function call that the
332 kernel executes, and keeping a maximum stack depth value and
333 stack-trace saved. If this is configured with DYNAMIC_FTRACE
334 then it will not have any overhead while the stack tracer
335 is disabled.
336
337 To enable the stack tracer on bootup, pass in 'stacktrace'
338 on the kernel command line.
339
340 The stack tracer can also be enabled or disabled via the
341 sysctl kernel.stack_tracer_enabled
342
343 Say N if unsure.
344
345config BLK_DEV_IO_TRACE
346 bool "Support for tracing block IO actions"
347 depends on SYSFS
348 depends on BLOCK
349 select RELAY
350 select DEBUG_FS
351 select TRACEPOINTS
352 select GENERIC_TRACER
353 select STACKTRACE
354 help
355 Say Y here if you want to be able to trace the block layer actions
356 on a given queue. Tracing allows you to see any traffic happening
357 on a block device queue. For more information (and the userspace
358 support tools needed), fetch the blktrace tools from:
359
360 git://git.kernel.dk/blktrace.git
361
362 Tracing also is possible using the ftrace interface, e.g.:
363
364 echo 1 > /sys/block/sda/sda1/trace/enable
365 echo blk > /sys/kernel/debug/tracing/current_tracer
366 cat /sys/kernel/debug/tracing/trace_pipe
367
368 If unsure, say N.
369
370config KPROBE_EVENT
371 depends on KPROBES
372 depends on HAVE_REGS_AND_STACK_ACCESS_API
373 bool "Enable kprobes-based dynamic events"
374 select TRACING
375 select PROBE_EVENTS
376 default y
377 help
378 This allows the user to add tracing events (similar to tracepoints)
379 on the fly via the ftrace interface. See
380 Documentation/trace/kprobetrace.txt for more details.
381
382 Those events can be inserted wherever kprobes can probe, and record
383 various register and memory values.
384
385 This option is also required by perf-probe subcommand of perf tools.
386 If you want to use perf tools, this option is strongly recommended.
387
388config UPROBE_EVENT
389 bool "Enable uprobes-based dynamic events"
390 depends on ARCH_SUPPORTS_UPROBES
391 depends on MMU
392 select UPROBES
393 select PROBE_EVENTS
394 select TRACING
395 default n
396 help
397 This allows the user to add tracing events on top of userspace
398 dynamic events (similar to tracepoints) on the fly via the trace
399 events interface. Those events can be inserted wherever uprobes
400 can probe, and record various registers.
401 This option is required if you plan to use perf-probe subcommand
402 of perf tools on user space applications.
403
404config PROBE_EVENTS
405 def_bool n
406
407config DYNAMIC_FTRACE
408 bool "enable/disable ftrace tracepoints dynamically"
409 depends on FUNCTION_TRACER
410 depends on HAVE_DYNAMIC_FTRACE
411 default y
412 help
413 This option will modify all the calls to ftrace dynamically
414 (will patch them out of the binary image and replace them
415 with a No-Op instruction) as they are called. A table is
416 created to dynamically enable them again.
417
418 This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
419 otherwise has native performance as long as no tracing is active.
420
421 The changes to the code are done by a kernel thread that
422 wakes up once a second and checks to see if any ftrace calls
423 were made. If so, it runs stop_machine (stops all CPUS)
424 and modifies the code to jump over the call to ftrace.
425
426config FUNCTION_PROFILER
427 bool "Kernel function profiler"
428 depends on FUNCTION_TRACER
429 default n
430 help
431 This option enables the kernel function profiler. A file is created
432 in debugfs called function_profile_enabled which defaults to zero.
433 When a 1 is echoed into this file profiling begins, and when a
434 zero is entered, profiling stops. A "functions" file is created in
435 the trace_stats directory; this file shows the list of functions that
436 have been hit and their counters.
437
438 If in doubt, say N.
439
440config FTRACE_MCOUNT_RECORD
441 def_bool y
442 depends on DYNAMIC_FTRACE
443 depends on HAVE_FTRACE_MCOUNT_RECORD
444
445config FTRACE_SELFTEST
446 bool
447
448config FTRACE_STARTUP_TEST
449 bool "Perform a startup test on ftrace"
450 depends on GENERIC_TRACER
451 select FTRACE_SELFTEST
452 help
453 This option performs a series of startup tests on ftrace. On bootup
454 a series of tests are made to verify that the tracer is
455 functioning properly. It will do tests on all the configured
456 tracers of ftrace.
457
458config EVENT_TRACE_TEST_SYSCALLS
459 bool "Run selftest on syscall events"
460 depends on FTRACE_STARTUP_TEST
461 help
462 This option will also enable testing every syscall event.
463 It only enables the event and disables it and runs various loads
464 with the event enabled. This adds a bit more time for kernel boot
465 up since it runs this on every system call defined.
466
467 TBD - enable a way to actually call the syscalls as we test their
468 events
469
470config MMIOTRACE
471 bool "Memory mapped IO tracing"
472 depends on HAVE_MMIOTRACE_SUPPORT && PCI
473 select GENERIC_TRACER
474 help
475 Mmiotrace traces Memory Mapped I/O access and is meant for
476 debugging and reverse engineering. It is called from the ioremap
477 implementation and works via page faults. Tracing is disabled by
478 default and can be enabled at run-time.
479
480 See Documentation/trace/mmiotrace.txt.
481 If you are not helping to develop drivers, say N.
482
483config MMIOTRACE_TEST
484 tristate "Test module for mmiotrace"
485 depends on MMIOTRACE && m
486 help
487 This is a dumb module for testing mmiotrace. It is very dangerous
488 as it will write garbage to IO memory starting at a given address.
489 However, it should be safe to use on e.g. unused portion of VRAM.
490
491 Say N, unless you absolutely know what you are doing.
492
493config RING_BUFFER_BENCHMARK
494 tristate "Ring buffer benchmark stress tester"
495 depends on RING_BUFFER
496 help
497 This option creates a test to stress the ring buffer and benchmark it.
498 It creates its own ring buffer such that it will not interfere with
499 any other users of the ring buffer (such as ftrace). It then creates
500 a producer and consumer that will run for 10 seconds and sleep for
501 10 seconds. Each interval it will print out the number of events
502 it recorded and give a rough estimate of how long each iteration took.
503
504 It does not disable interrupts or raise its priority, so it may be
505 affected by processes that are running.
506
507 If unsure, say N.
508
509endif # FTRACE
510
511endif # TRACING_SUPPORT
512
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Architectures that offer an FUNCTION_TRACER implementation should
4# select HAVE_FUNCTION_TRACER:
5#
6
7config USER_STACKTRACE_SUPPORT
8 bool
9
10config NOP_TRACER
11 bool
12
13config HAVE_RETHOOK
14 bool
15
16config RETHOOK
17 bool
18 depends on HAVE_RETHOOK
19 help
20 Enable generic return hooking feature. This is an internal
21 API, which will be used by other function-entry hooking
22 features like fprobe and kprobes.
23
24config HAVE_FUNCTION_TRACER
25 bool
26 help
27 See Documentation/trace/ftrace-design.rst
28
29config HAVE_FUNCTION_GRAPH_TRACER
30 bool
31 help
32 See Documentation/trace/ftrace-design.rst
33
34config HAVE_FUNCTION_GRAPH_RETVAL
35 bool
36
37config HAVE_DYNAMIC_FTRACE
38 bool
39 help
40 See Documentation/trace/ftrace-design.rst
41
42config HAVE_DYNAMIC_FTRACE_WITH_REGS
43 bool
44
45config HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
46 bool
47
48config HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
49 bool
50
51config HAVE_DYNAMIC_FTRACE_WITH_ARGS
52 bool
53 help
54 If this is set, then arguments and stack can be found from
55 the ftrace_regs passed into the function callback regs parameter
56 by default, even without setting the REGS flag in the ftrace_ops.
57 This allows for use of ftrace_regs_get_argument() and
58 ftrace_regs_get_stack_pointer().
59
60config HAVE_DYNAMIC_FTRACE_NO_PATCHABLE
61 bool
62 help
63 If the architecture generates __patchable_function_entries sections
64 but does not want them included in the ftrace locations.
65
66config HAVE_FTRACE_MCOUNT_RECORD
67 bool
68 help
69 See Documentation/trace/ftrace-design.rst
70
71config HAVE_SYSCALL_TRACEPOINTS
72 bool
73 help
74 See Documentation/trace/ftrace-design.rst
75
76config HAVE_FENTRY
77 bool
78 help
79 Arch supports the gcc options -pg with -mfentry
80
81config HAVE_NOP_MCOUNT
82 bool
83 help
84 Arch supports the gcc options -pg with -mrecord-mcount and -nop-mcount
85
86config HAVE_OBJTOOL_MCOUNT
87 bool
88 help
89 Arch supports objtool --mcount
90
91config HAVE_OBJTOOL_NOP_MCOUNT
92 bool
93 help
94 Arch supports the objtool options --mcount with --mnop.
95 An architecture can select this if it wants to enable nop'ing
96 of ftrace locations.
97
98config HAVE_C_RECORDMCOUNT
99 bool
100 help
101 C version of recordmcount available?
102
103config HAVE_BUILDTIME_MCOUNT_SORT
104 bool
105 help
106 An architecture selects this if it sorts the mcount_loc section
107 at build time.
108
109config BUILDTIME_MCOUNT_SORT
110 bool
111 default y
112 depends on HAVE_BUILDTIME_MCOUNT_SORT && DYNAMIC_FTRACE
113 help
114 Sort the mcount_loc section at build time.
115
116config TRACER_MAX_TRACE
117 bool
118
119config TRACE_CLOCK
120 bool
121
122config RING_BUFFER
123 bool
124 select TRACE_CLOCK
125 select IRQ_WORK
126
127config EVENT_TRACING
128 select CONTEXT_SWITCH_TRACER
129 select GLOB
130 bool
131
132config CONTEXT_SWITCH_TRACER
133 bool
134
135config RING_BUFFER_ALLOW_SWAP
136 bool
137 help
138 Allow the use of ring_buffer_swap_cpu.
139 Adds a very slight overhead to tracing when enabled.
140
141config PREEMPTIRQ_TRACEPOINTS
142 bool
143 depends on TRACE_PREEMPT_TOGGLE || TRACE_IRQFLAGS
144 select TRACING
145 default y
146 help
147 Create preempt/irq toggle tracepoints if needed, so that other parts
148 of the kernel can use them to generate or add hooks to them.
149
150# All tracer options should select GENERIC_TRACER. For those options that are
151# enabled by all tracers (context switch and event tracer) they select TRACING.
152# This allows those options to appear when no other tracer is selected. But the
153# options do not appear when something else selects it. We need the two options
154# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
155# hiding of the automatic options.
156
157config TRACING
158 bool
159 select RING_BUFFER
160 select STACKTRACE if STACKTRACE_SUPPORT
161 select TRACEPOINTS
162 select NOP_TRACER
163 select BINARY_PRINTF
164 select EVENT_TRACING
165 select TRACE_CLOCK
166 select TASKS_RCU if PREEMPTION
167
168config GENERIC_TRACER
169 bool
170 select TRACING
171
172#
173# Minimum requirements an architecture has to meet for us to
174# be able to offer generic tracing facilities:
175#
176config TRACING_SUPPORT
177 bool
178 depends on TRACE_IRQFLAGS_SUPPORT
179 depends on STACKTRACE_SUPPORT
180 default y
181
182menuconfig FTRACE
183 bool "Tracers"
184 depends on TRACING_SUPPORT
185 default y if DEBUG_KERNEL
186 help
187 Enable the kernel tracing infrastructure.
188
189if FTRACE
190
191config BOOTTIME_TRACING
192 bool "Boot-time Tracing support"
193 depends on TRACING
194 select BOOT_CONFIG
195 help
196 Enable developer to setup ftrace subsystem via supplemental
197 kernel cmdline at boot time for debugging (tracing) driver
198 initialization and boot process.
199
200config FUNCTION_TRACER
201 bool "Kernel Function Tracer"
202 depends on HAVE_FUNCTION_TRACER
203 select KALLSYMS
204 select GENERIC_TRACER
205 select CONTEXT_SWITCH_TRACER
206 select GLOB
207 select TASKS_RCU if PREEMPTION
208 select TASKS_RUDE_RCU
209 help
210 Enable the kernel to trace every kernel function. This is done
211 by using a compiler feature to insert a small, 5-byte No-Operation
212 instruction at the beginning of every kernel function, which NOP
213 sequence is then dynamically patched into a tracer call when
214 tracing is enabled by the administrator. If it's runtime disabled
215 (the bootup default), then the overhead of the instructions is very
216 small and not measurable even in micro-benchmarks (at least on
217 x86, but may have impact on other architectures).
218
219config FUNCTION_GRAPH_TRACER
220 bool "Kernel Function Graph Tracer"
221 depends on HAVE_FUNCTION_GRAPH_TRACER
222 depends on FUNCTION_TRACER
223 depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE
224 default y
225 help
226 Enable the kernel to trace a function at both its return
227 and its entry.
228 Its first purpose is to trace the duration of functions and
229 draw a call graph for each thread with some information like
230 the return value. This is done by setting the current return
231 address on the current task structure into a stack of calls.
232
233config FUNCTION_GRAPH_RETVAL
234 bool "Kernel Function Graph Return Value"
235 depends on HAVE_FUNCTION_GRAPH_RETVAL
236 depends on FUNCTION_GRAPH_TRACER
237 default n
238 help
239 Support recording and printing the function return value when
240 using function graph tracer. It can be helpful to locate functions
241 that return errors. This feature is off by default, and you can
242 enable it via the trace option funcgraph-retval.
243 See Documentation/trace/ftrace.rst
244
245config DYNAMIC_FTRACE
246 bool "enable/disable function tracing dynamically"
247 depends on FUNCTION_TRACER
248 depends on HAVE_DYNAMIC_FTRACE
249 default y
250 help
251 This option will modify all the calls to function tracing
252 dynamically (will patch them out of the binary image and
253 replace them with a No-Op instruction) on boot up. During
254 compile time, a table is made of all the locations that ftrace
255 can function trace, and this table is linked into the kernel
256 image. When this is enabled, functions can be individually
257 enabled, and the functions not enabled will not affect
258 performance of the system.
259
260 See the files in /sys/kernel/tracing:
261 available_filter_functions
262 set_ftrace_filter
263 set_ftrace_notrace
264
265 This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
266 otherwise has native performance as long as no tracing is active.
267
268config DYNAMIC_FTRACE_WITH_REGS
269 def_bool y
270 depends on DYNAMIC_FTRACE
271 depends on HAVE_DYNAMIC_FTRACE_WITH_REGS
272
273config DYNAMIC_FTRACE_WITH_DIRECT_CALLS
274 def_bool y
275 depends on DYNAMIC_FTRACE_WITH_REGS || DYNAMIC_FTRACE_WITH_ARGS
276 depends on HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
277
278config DYNAMIC_FTRACE_WITH_CALL_OPS
279 def_bool y
280 depends on HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
281
282config DYNAMIC_FTRACE_WITH_ARGS
283 def_bool y
284 depends on DYNAMIC_FTRACE
285 depends on HAVE_DYNAMIC_FTRACE_WITH_ARGS
286
287config FPROBE
288 bool "Kernel Function Probe (fprobe)"
289 depends on FUNCTION_TRACER
290 depends on DYNAMIC_FTRACE_WITH_REGS
291 depends on HAVE_RETHOOK
292 select RETHOOK
293 default n
294 help
295 This option enables kernel function probe (fprobe) based on ftrace.
296 The fprobe is similar to kprobes, but probes only for kernel function
297 entries and exits. This also can probe multiple functions by one
298 fprobe.
299
300 If unsure, say N.
301
302config FUNCTION_PROFILER
303 bool "Kernel function profiler"
304 depends on FUNCTION_TRACER
305 default n
306 help
307 This option enables the kernel function profiler. A file is created
308 in debugfs called function_profile_enabled which defaults to zero.
309 When a 1 is echoed into this file profiling begins, and when a
310 zero is entered, profiling stops. A "functions" file is created in
311 the trace_stat directory; this file shows the list of functions that
312 have been hit and their counters.
313
314 If in doubt, say N.
315
316config STACK_TRACER
317 bool "Trace max stack"
318 depends on HAVE_FUNCTION_TRACER
319 select FUNCTION_TRACER
320 select STACKTRACE
321 select KALLSYMS
322 help
323 This special tracer records the maximum stack footprint of the
324 kernel and displays it in /sys/kernel/tracing/stack_trace.
325
326 This tracer works by hooking into every function call that the
327 kernel executes, and keeping a maximum stack depth value and
328 stack-trace saved. If this is configured with DYNAMIC_FTRACE
329 then it will not have any overhead while the stack tracer
330 is disabled.
331
332 To enable the stack tracer on bootup, pass in 'stacktrace'
333 on the kernel command line.
334
335 The stack tracer can also be enabled or disabled via the
336 sysctl kernel.stack_tracer_enabled
337
338 Say N if unsure.
339
340config TRACE_PREEMPT_TOGGLE
341 bool
342 help
343 Enables hooks which will be called when preemption is first disabled,
344 and last enabled.
345
346config IRQSOFF_TRACER
347 bool "Interrupts-off Latency Tracer"
348 default n
349 depends on TRACE_IRQFLAGS_SUPPORT
350 select TRACE_IRQFLAGS
351 select GENERIC_TRACER
352 select TRACER_MAX_TRACE
353 select RING_BUFFER_ALLOW_SWAP
354 select TRACER_SNAPSHOT
355 select TRACER_SNAPSHOT_PER_CPU_SWAP
356 help
357 This option measures the time spent in irqs-off critical
358 sections, with microsecond accuracy.
359
360 The default measurement method is a maximum search, which is
361 disabled by default and can be runtime (re-)started
362 via:
363
364 echo 0 > /sys/kernel/tracing/tracing_max_latency
365
366 (Note that kernel size and overhead increase with this option
367 enabled. This option and the preempt-off timing option can be
368 used together or separately.)
369
370config PREEMPT_TRACER
371 bool "Preemption-off Latency Tracer"
372 default n
373 depends on PREEMPTION
374 select GENERIC_TRACER
375 select TRACER_MAX_TRACE
376 select RING_BUFFER_ALLOW_SWAP
377 select TRACER_SNAPSHOT
378 select TRACER_SNAPSHOT_PER_CPU_SWAP
379 select TRACE_PREEMPT_TOGGLE
380 help
381 This option measures the time spent in preemption-off critical
382 sections, with microsecond accuracy.
383
384 The default measurement method is a maximum search, which is
385 disabled by default and can be runtime (re-)started
386 via:
387
388 echo 0 > /sys/kernel/tracing/tracing_max_latency
389
390 (Note that kernel size and overhead increase with this option
391 enabled. This option and the irqs-off timing option can be
392 used together or separately.)
393
394config SCHED_TRACER
395 bool "Scheduling Latency Tracer"
396 select GENERIC_TRACER
397 select CONTEXT_SWITCH_TRACER
398 select TRACER_MAX_TRACE
399 select TRACER_SNAPSHOT
400 help
401 This tracer tracks the latency of the highest priority task
402 to be scheduled in, starting from the point it has woken up.
403
404config HWLAT_TRACER
405 bool "Tracer to detect hardware latencies (like SMIs)"
406 select GENERIC_TRACER
407 select TRACER_MAX_TRACE
408 help
409 This tracer, when enabled will create one or more kernel threads,
410 depending on what the cpumask file is set to, which each thread
411 spinning in a loop looking for interruptions caused by
412 something other than the kernel. For example, if a
413 System Management Interrupt (SMI) takes a noticeable amount of
414 time, this tracer will detect it. This is useful for testing
415 if a system is reliable for Real Time tasks.
416
417 Some files are created in the tracing directory when this
418 is enabled:
419
420 hwlat_detector/width - time in usecs for how long to spin for
421 hwlat_detector/window - time in usecs between the start of each
422 iteration
423
424 A kernel thread is created that will spin with interrupts disabled
425 for "width" microseconds in every "window" cycle. It will not spin
426 for "window - width" microseconds, where the system can
427 continue to operate.
428
429 The output will appear in the trace and trace_pipe files.
430
431 When the tracer is not running, it has no affect on the system,
432 but when it is running, it can cause the system to be
433 periodically non responsive. Do not run this tracer on a
434 production system.
435
436 To enable this tracer, echo in "hwlat" into the current_tracer
437 file. Every time a latency is greater than tracing_thresh, it will
438 be recorded into the ring buffer.
439
440config OSNOISE_TRACER
441 bool "OS Noise tracer"
442 select GENERIC_TRACER
443 select TRACER_MAX_TRACE
444 help
445 In the context of high-performance computing (HPC), the Operating
446 System Noise (osnoise) refers to the interference experienced by an
447 application due to activities inside the operating system. In the
448 context of Linux, NMIs, IRQs, SoftIRQs, and any other system thread
449 can cause noise to the system. Moreover, hardware-related jobs can
450 also cause noise, for example, via SMIs.
451
452 The osnoise tracer leverages the hwlat_detector by running a similar
453 loop with preemption, SoftIRQs and IRQs enabled, thus allowing all
454 the sources of osnoise during its execution. The osnoise tracer takes
455 note of the entry and exit point of any source of interferences,
456 increasing a per-cpu interference counter. It saves an interference
457 counter for each source of interference. The interference counter for
458 NMI, IRQs, SoftIRQs, and threads is increased anytime the tool
459 observes these interferences' entry events. When a noise happens
460 without any interference from the operating system level, the
461 hardware noise counter increases, pointing to a hardware-related
462 noise. In this way, osnoise can account for any source of
463 interference. At the end of the period, the osnoise tracer prints
464 the sum of all noise, the max single noise, the percentage of CPU
465 available for the thread, and the counters for the noise sources.
466
467 In addition to the tracer, a set of tracepoints were added to
468 facilitate the identification of the osnoise source.
469
470 The output will appear in the trace and trace_pipe files.
471
472 To enable this tracer, echo in "osnoise" into the current_tracer
473 file.
474
475config TIMERLAT_TRACER
476 bool "Timerlat tracer"
477 select OSNOISE_TRACER
478 select GENERIC_TRACER
479 help
480 The timerlat tracer aims to help the preemptive kernel developers
481 to find sources of wakeup latencies of real-time threads.
482
483 The tracer creates a per-cpu kernel thread with real-time priority.
484 The tracer thread sets a periodic timer to wakeup itself, and goes
485 to sleep waiting for the timer to fire. At the wakeup, the thread
486 then computes a wakeup latency value as the difference between
487 the current time and the absolute time that the timer was set
488 to expire.
489
490 The tracer prints two lines at every activation. The first is the
491 timer latency observed at the hardirq context before the
492 activation of the thread. The second is the timer latency observed
493 by the thread, which is the same level that cyclictest reports. The
494 ACTIVATION ID field serves to relate the irq execution to its
495 respective thread execution.
496
497 The tracer is build on top of osnoise tracer, and the osnoise:
498 events can be used to trace the source of interference from NMI,
499 IRQs and other threads. It also enables the capture of the
500 stacktrace at the IRQ context, which helps to identify the code
501 path that can cause thread delay.
502
503config MMIOTRACE
504 bool "Memory mapped IO tracing"
505 depends on HAVE_MMIOTRACE_SUPPORT && PCI
506 select GENERIC_TRACER
507 help
508 Mmiotrace traces Memory Mapped I/O access and is meant for
509 debugging and reverse engineering. It is called from the ioremap
510 implementation and works via page faults. Tracing is disabled by
511 default and can be enabled at run-time.
512
513 See Documentation/trace/mmiotrace.rst.
514 If you are not helping to develop drivers, say N.
515
516config ENABLE_DEFAULT_TRACERS
517 bool "Trace process context switches and events"
518 depends on !GENERIC_TRACER
519 select TRACING
520 help
521 This tracer hooks to various trace points in the kernel,
522 allowing the user to pick and choose which trace point they
523 want to trace. It also includes the sched_switch tracer plugin.
524
525config FTRACE_SYSCALLS
526 bool "Trace syscalls"
527 depends on HAVE_SYSCALL_TRACEPOINTS
528 select GENERIC_TRACER
529 select KALLSYMS
530 help
531 Basic tracer to catch the syscall entry and exit events.
532
533config TRACER_SNAPSHOT
534 bool "Create a snapshot trace buffer"
535 select TRACER_MAX_TRACE
536 help
537 Allow tracing users to take snapshot of the current buffer using the
538 ftrace interface, e.g.:
539
540 echo 1 > /sys/kernel/tracing/snapshot
541 cat snapshot
542
543config TRACER_SNAPSHOT_PER_CPU_SWAP
544 bool "Allow snapshot to swap per CPU"
545 depends on TRACER_SNAPSHOT
546 select RING_BUFFER_ALLOW_SWAP
547 help
548 Allow doing a snapshot of a single CPU buffer instead of a
549 full swap (all buffers). If this is set, then the following is
550 allowed:
551
552 echo 1 > /sys/kernel/tracing/per_cpu/cpu2/snapshot
553
554 After which, only the tracing buffer for CPU 2 was swapped with
555 the main tracing buffer, and the other CPU buffers remain the same.
556
557 When this is enabled, this adds a little more overhead to the
558 trace recording, as it needs to add some checks to synchronize
559 recording with swaps. But this does not affect the performance
560 of the overall system. This is enabled by default when the preempt
561 or irq latency tracers are enabled, as those need to swap as well
562 and already adds the overhead (plus a lot more).
563
564config TRACE_BRANCH_PROFILING
565 bool
566 select GENERIC_TRACER
567
568choice
569 prompt "Branch Profiling"
570 default BRANCH_PROFILE_NONE
571 help
572 The branch profiling is a software profiler. It will add hooks
573 into the C conditionals to test which path a branch takes.
574
575 The likely/unlikely profiler only looks at the conditions that
576 are annotated with a likely or unlikely macro.
577
578 The "all branch" profiler will profile every if-statement in the
579 kernel. This profiler will also enable the likely/unlikely
580 profiler.
581
582 Either of the above profilers adds a bit of overhead to the system.
583 If unsure, choose "No branch profiling".
584
585config BRANCH_PROFILE_NONE
586 bool "No branch profiling"
587 help
588 No branch profiling. Branch profiling adds a bit of overhead.
589 Only enable it if you want to analyse the branching behavior.
590 Otherwise keep it disabled.
591
592config PROFILE_ANNOTATED_BRANCHES
593 bool "Trace likely/unlikely profiler"
594 select TRACE_BRANCH_PROFILING
595 help
596 This tracer profiles all likely and unlikely macros
597 in the kernel. It will display the results in:
598
599 /sys/kernel/tracing/trace_stat/branch_annotated
600
601 Note: this will add a significant overhead; only turn this
602 on if you need to profile the system's use of these macros.
603
604config PROFILE_ALL_BRANCHES
605 bool "Profile all if conditionals" if !FORTIFY_SOURCE
606 select TRACE_BRANCH_PROFILING
607 help
608 This tracer profiles all branch conditions. Every if ()
609 taken in the kernel is recorded whether it hit or miss.
610 The results will be displayed in:
611
612 /sys/kernel/tracing/trace_stat/branch_all
613
614 This option also enables the likely/unlikely profiler.
615
616 This configuration, when enabled, will impose a great overhead
617 on the system. This should only be enabled when the system
618 is to be analyzed in much detail.
619endchoice
620
621config TRACING_BRANCHES
622 bool
623 help
624 Selected by tracers that will trace the likely and unlikely
625 conditions. This prevents the tracers themselves from being
626 profiled. Profiling the tracing infrastructure can only happen
627 when the likelys and unlikelys are not being traced.
628
629config BRANCH_TRACER
630 bool "Trace likely/unlikely instances"
631 depends on TRACE_BRANCH_PROFILING
632 select TRACING_BRANCHES
633 help
634 This traces the events of likely and unlikely condition
635 calls in the kernel. The difference between this and the
636 "Trace likely/unlikely profiler" is that this is not a
637 histogram of the callers, but actually places the calling
638 events into a running trace buffer to see when and where the
639 events happened, as well as their results.
640
641 Say N if unsure.
642
643config BLK_DEV_IO_TRACE
644 bool "Support for tracing block IO actions"
645 depends on SYSFS
646 depends on BLOCK
647 select RELAY
648 select DEBUG_FS
649 select TRACEPOINTS
650 select GENERIC_TRACER
651 select STACKTRACE
652 help
653 Say Y here if you want to be able to trace the block layer actions
654 on a given queue. Tracing allows you to see any traffic happening
655 on a block device queue. For more information (and the userspace
656 support tools needed), fetch the blktrace tools from:
657
658 git://git.kernel.dk/blktrace.git
659
660 Tracing also is possible using the ftrace interface, e.g.:
661
662 echo 1 > /sys/block/sda/sda1/trace/enable
663 echo blk > /sys/kernel/tracing/current_tracer
664 cat /sys/kernel/tracing/trace_pipe
665
666 If unsure, say N.
667
668config FPROBE_EVENTS
669 depends on FPROBE
670 depends on HAVE_REGS_AND_STACK_ACCESS_API
671 bool "Enable fprobe-based dynamic events"
672 select TRACING
673 select PROBE_EVENTS
674 select DYNAMIC_EVENTS
675 default y
676 help
677 This allows user to add tracing events on the function entry and
678 exit via ftrace interface. The syntax is same as the kprobe events
679 and the kprobe events on function entry and exit will be
680 transparently converted to this fprobe events.
681
682config PROBE_EVENTS_BTF_ARGS
683 depends on HAVE_FUNCTION_ARG_ACCESS_API
684 depends on FPROBE_EVENTS || KPROBE_EVENTS
685 depends on DEBUG_INFO_BTF && BPF_SYSCALL
686 bool "Support BTF function arguments for probe events"
687 default y
688 help
689 The user can specify the arguments of the probe event using the names
690 of the arguments of the probed function, when the probe location is a
691 kernel function entry or a tracepoint.
692 This is available only if BTF (BPF Type Format) support is enabled.
693
694config KPROBE_EVENTS
695 depends on KPROBES
696 depends on HAVE_REGS_AND_STACK_ACCESS_API
697 bool "Enable kprobes-based dynamic events"
698 select TRACING
699 select PROBE_EVENTS
700 select DYNAMIC_EVENTS
701 default y
702 help
703 This allows the user to add tracing events (similar to tracepoints)
704 on the fly via the ftrace interface. See
705 Documentation/trace/kprobetrace.rst for more details.
706
707 Those events can be inserted wherever kprobes can probe, and record
708 various register and memory values.
709
710 This option is also required by perf-probe subcommand of perf tools.
711 If you want to use perf tools, this option is strongly recommended.
712
713config KPROBE_EVENTS_ON_NOTRACE
714 bool "Do NOT protect notrace function from kprobe events"
715 depends on KPROBE_EVENTS
716 depends on DYNAMIC_FTRACE
717 default n
718 help
719 This is only for the developers who want to debug ftrace itself
720 using kprobe events.
721
722 If kprobes can use ftrace instead of breakpoint, ftrace related
723 functions are protected from kprobe-events to prevent an infinite
724 recursion or any unexpected execution path which leads to a kernel
725 crash.
726
727 This option disables such protection and allows you to put kprobe
728 events on ftrace functions for debugging ftrace by itself.
729 Note that this might let you shoot yourself in the foot.
730
731 If unsure, say N.
732
733config UPROBE_EVENTS
734 bool "Enable uprobes-based dynamic events"
735 depends on ARCH_SUPPORTS_UPROBES
736 depends on MMU
737 depends on PERF_EVENTS
738 select UPROBES
739 select PROBE_EVENTS
740 select DYNAMIC_EVENTS
741 select TRACING
742 default y
743 help
744 This allows the user to add tracing events on top of userspace
745 dynamic events (similar to tracepoints) on the fly via the trace
746 events interface. Those events can be inserted wherever uprobes
747 can probe, and record various registers.
748 This option is required if you plan to use perf-probe subcommand
749 of perf tools on user space applications.
750
751config BPF_EVENTS
752 depends on BPF_SYSCALL
753 depends on (KPROBE_EVENTS || UPROBE_EVENTS) && PERF_EVENTS
754 bool
755 default y
756 help
757 This allows the user to attach BPF programs to kprobe, uprobe, and
758 tracepoint events.
759
760config DYNAMIC_EVENTS
761 def_bool n
762
763config PROBE_EVENTS
764 def_bool n
765
766config BPF_KPROBE_OVERRIDE
767 bool "Enable BPF programs to override a kprobed function"
768 depends on BPF_EVENTS
769 depends on FUNCTION_ERROR_INJECTION
770 default n
771 help
772 Allows BPF to override the execution of a probed function and
773 set a different return value. This is used for error injection.
774
775config FTRACE_MCOUNT_RECORD
776 def_bool y
777 depends on DYNAMIC_FTRACE
778 depends on HAVE_FTRACE_MCOUNT_RECORD
779
780config FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
781 bool
782 depends on FTRACE_MCOUNT_RECORD
783
784config FTRACE_MCOUNT_USE_CC
785 def_bool y
786 depends on $(cc-option,-mrecord-mcount)
787 depends on !FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
788 depends on FTRACE_MCOUNT_RECORD
789
790config FTRACE_MCOUNT_USE_OBJTOOL
791 def_bool y
792 depends on HAVE_OBJTOOL_MCOUNT
793 depends on !FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
794 depends on !FTRACE_MCOUNT_USE_CC
795 depends on FTRACE_MCOUNT_RECORD
796 select OBJTOOL
797
798config FTRACE_MCOUNT_USE_RECORDMCOUNT
799 def_bool y
800 depends on !FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
801 depends on !FTRACE_MCOUNT_USE_CC
802 depends on !FTRACE_MCOUNT_USE_OBJTOOL
803 depends on FTRACE_MCOUNT_RECORD
804
805config TRACING_MAP
806 bool
807 depends on ARCH_HAVE_NMI_SAFE_CMPXCHG
808 help
809 tracing_map is a special-purpose lock-free map for tracing,
810 separated out as a stand-alone facility in order to allow it
811 to be shared between multiple tracers. It isn't meant to be
812 generally used outside of that context, and is normally
813 selected by tracers that use it.
814
815config SYNTH_EVENTS
816 bool "Synthetic trace events"
817 select TRACING
818 select DYNAMIC_EVENTS
819 default n
820 help
821 Synthetic events are user-defined trace events that can be
822 used to combine data from other trace events or in fact any
823 data source. Synthetic events can be generated indirectly
824 via the trace() action of histogram triggers or directly
825 by way of an in-kernel API.
826
827 See Documentation/trace/events.rst or
828 Documentation/trace/histogram.rst for details and examples.
829
830 If in doubt, say N.
831
832config USER_EVENTS
833 bool "User trace events"
834 select TRACING
835 select DYNAMIC_EVENTS
836 help
837 User trace events are user-defined trace events that
838 can be used like an existing kernel trace event. User trace
839 events are generated by writing to a tracefs file. User
840 processes can determine if their tracing events should be
841 generated by registering a value and bit with the kernel
842 that reflects when it is enabled or not.
843
844 See Documentation/trace/user_events.rst.
845 If in doubt, say N.
846
847config HIST_TRIGGERS
848 bool "Histogram triggers"
849 depends on ARCH_HAVE_NMI_SAFE_CMPXCHG
850 select TRACING_MAP
851 select TRACING
852 select DYNAMIC_EVENTS
853 select SYNTH_EVENTS
854 default n
855 help
856 Hist triggers allow one or more arbitrary trace event fields
857 to be aggregated into hash tables and dumped to stdout by
858 reading a debugfs/tracefs file. They're useful for
859 gathering quick and dirty (though precise) summaries of
860 event activity as an initial guide for further investigation
861 using more advanced tools.
862
863 Inter-event tracing of quantities such as latencies is also
864 supported using hist triggers under this option.
865
866 See Documentation/trace/histogram.rst.
867 If in doubt, say N.
868
869config TRACE_EVENT_INJECT
870 bool "Trace event injection"
871 depends on TRACING
872 help
873 Allow user-space to inject a specific trace event into the ring
874 buffer. This is mainly used for testing purpose.
875
876 If unsure, say N.
877
878config TRACEPOINT_BENCHMARK
879 bool "Add tracepoint that benchmarks tracepoints"
880 help
881 This option creates the tracepoint "benchmark:benchmark_event".
882 When the tracepoint is enabled, it kicks off a kernel thread that
883 goes into an infinite loop (calling cond_resched() to let other tasks
884 run), and calls the tracepoint. Each iteration will record the time
885 it took to write to the tracepoint and the next iteration that
886 data will be passed to the tracepoint itself. That is, the tracepoint
887 will report the time it took to do the previous tracepoint.
888 The string written to the tracepoint is a static string of 128 bytes
889 to keep the time the same. The initial string is simply a write of
890 "START". The second string records the cold cache time of the first
891 write which is not added to the rest of the calculations.
892
893 As it is a tight loop, it benchmarks as hot cache. That's fine because
894 we care most about hot paths that are probably in cache already.
895
896 An example of the output:
897
898 START
899 first=3672 [COLD CACHED]
900 last=632 first=3672 max=632 min=632 avg=316 std=446 std^2=199712
901 last=278 first=3672 max=632 min=278 avg=303 std=316 std^2=100337
902 last=277 first=3672 max=632 min=277 avg=296 std=258 std^2=67064
903 last=273 first=3672 max=632 min=273 avg=292 std=224 std^2=50411
904 last=273 first=3672 max=632 min=273 avg=288 std=200 std^2=40389
905 last=281 first=3672 max=632 min=273 avg=287 std=183 std^2=33666
906
907
908config RING_BUFFER_BENCHMARK
909 tristate "Ring buffer benchmark stress tester"
910 depends on RING_BUFFER
911 help
912 This option creates a test to stress the ring buffer and benchmark it.
913 It creates its own ring buffer such that it will not interfere with
914 any other users of the ring buffer (such as ftrace). It then creates
915 a producer and consumer that will run for 10 seconds and sleep for
916 10 seconds. Each interval it will print out the number of events
917 it recorded and give a rough estimate of how long each iteration took.
918
919 It does not disable interrupts or raise its priority, so it may be
920 affected by processes that are running.
921
922 If unsure, say N.
923
924config TRACE_EVAL_MAP_FILE
925 bool "Show eval mappings for trace events"
926 depends on TRACING
927 help
928 The "print fmt" of the trace events will show the enum/sizeof names
929 instead of their values. This can cause problems for user space tools
930 that use this string to parse the raw data as user space does not know
931 how to convert the string to its value.
932
933 To fix this, there's a special macro in the kernel that can be used
934 to convert an enum/sizeof into its value. If this macro is used, then
935 the print fmt strings will be converted to their values.
936
937 If something does not get converted properly, this option can be
938 used to show what enums/sizeof the kernel tried to convert.
939
940 This option is for debugging the conversions. A file is created
941 in the tracing directory called "eval_map" that will show the
942 names matched with their values and what trace event system they
943 belong too.
944
945 Normally, the mapping of the strings to values will be freed after
946 boot up or module load. With this option, they will not be freed, as
947 they are needed for the "eval_map" file. Enabling this option will
948 increase the memory footprint of the running kernel.
949
950 If unsure, say N.
951
952config FTRACE_RECORD_RECURSION
953 bool "Record functions that recurse in function tracing"
954 depends on FUNCTION_TRACER
955 help
956 All callbacks that attach to the function tracing have some sort
957 of protection against recursion. Even though the protection exists,
958 it adds overhead. This option will create a file in the tracefs
959 file system called "recursed_functions" that will list the functions
960 that triggered a recursion.
961
962 This will add more overhead to cases that have recursion.
963
964 If unsure, say N
965
966config FTRACE_RECORD_RECURSION_SIZE
967 int "Max number of recursed functions to record"
968 default 128
969 depends on FTRACE_RECORD_RECURSION
970 help
971 This defines the limit of number of functions that can be
972 listed in the "recursed_functions" file, that lists all
973 the functions that caused a recursion to happen.
974 This file can be reset, but the limit can not change in
975 size at runtime.
976
977config RING_BUFFER_RECORD_RECURSION
978 bool "Record functions that recurse in the ring buffer"
979 depends on FTRACE_RECORD_RECURSION
980 # default y, because it is coupled with FTRACE_RECORD_RECURSION
981 default y
982 help
983 The ring buffer has its own internal recursion. Although when
984 recursion happens it won't cause harm because of the protection,
985 but it does cause unwanted overhead. Enabling this option will
986 place where recursion was detected into the ftrace "recursed_functions"
987 file.
988
989 This will add more overhead to cases that have recursion.
990
991config GCOV_PROFILE_FTRACE
992 bool "Enable GCOV profiling on ftrace subsystem"
993 depends on GCOV_KERNEL
994 help
995 Enable GCOV profiling on ftrace subsystem for checking
996 which functions/lines are tested.
997
998 If unsure, say N.
999
1000 Note that on a kernel compiled with this config, ftrace will
1001 run significantly slower.
1002
1003config FTRACE_SELFTEST
1004 bool
1005
1006config FTRACE_STARTUP_TEST
1007 bool "Perform a startup test on ftrace"
1008 depends on GENERIC_TRACER
1009 select FTRACE_SELFTEST
1010 help
1011 This option performs a series of startup tests on ftrace. On bootup
1012 a series of tests are made to verify that the tracer is
1013 functioning properly. It will do tests on all the configured
1014 tracers of ftrace.
1015
1016config EVENT_TRACE_STARTUP_TEST
1017 bool "Run selftest on trace events"
1018 depends on FTRACE_STARTUP_TEST
1019 default y
1020 help
1021 This option performs a test on all trace events in the system.
1022 It basically just enables each event and runs some code that
1023 will trigger events (not necessarily the event it enables)
1024 This may take some time run as there are a lot of events.
1025
1026config EVENT_TRACE_TEST_SYSCALLS
1027 bool "Run selftest on syscall events"
1028 depends on EVENT_TRACE_STARTUP_TEST
1029 help
1030 This option will also enable testing every syscall event.
1031 It only enables the event and disables it and runs various loads
1032 with the event enabled. This adds a bit more time for kernel boot
1033 up since it runs this on every system call defined.
1034
1035 TBD - enable a way to actually call the syscalls as we test their
1036 events
1037
1038config FTRACE_SORT_STARTUP_TEST
1039 bool "Verify compile time sorting of ftrace functions"
1040 depends on DYNAMIC_FTRACE
1041 depends on BUILDTIME_MCOUNT_SORT
1042 help
1043 Sorting of the mcount_loc sections that is used to find the
1044 where the ftrace knows where to patch functions for tracing
1045 and other callbacks is done at compile time. But if the sort
1046 is not done correctly, it will cause non-deterministic failures.
1047 When this is set, the sorted sections will be verified that they
1048 are in deed sorted and will warn if they are not.
1049
1050 If unsure, say N
1051
1052config RING_BUFFER_STARTUP_TEST
1053 bool "Ring buffer startup self test"
1054 depends on RING_BUFFER
1055 help
1056 Run a simple self test on the ring buffer on boot up. Late in the
1057 kernel boot sequence, the test will start that kicks off
1058 a thread per cpu. Each thread will write various size events
1059 into the ring buffer. Another thread is created to send IPIs
1060 to each of the threads, where the IPI handler will also write
1061 to the ring buffer, to test/stress the nesting ability.
1062 If any anomalies are discovered, a warning will be displayed
1063 and all ring buffers will be disabled.
1064
1065 The test runs for 10 seconds. This will slow your boot time
1066 by at least 10 more seconds.
1067
1068 At the end of the test, statistics and more checks are done.
1069 It will output the stats of each per cpu buffer: What
1070 was written, the sizes, what was read, what was lost, and
1071 other similar details.
1072
1073 If unsure, say N
1074
1075config RING_BUFFER_VALIDATE_TIME_DELTAS
1076 bool "Verify ring buffer time stamp deltas"
1077 depends on RING_BUFFER
1078 help
1079 This will audit the time stamps on the ring buffer sub
1080 buffer to make sure that all the time deltas for the
1081 events on a sub buffer matches the current time stamp.
1082 This audit is performed for every event that is not
1083 interrupted, or interrupting another event. A check
1084 is also made when traversing sub buffers to make sure
1085 that all the deltas on the previous sub buffer do not
1086 add up to be greater than the current time stamp.
1087
1088 NOTE: This adds significant overhead to recording of events,
1089 and should only be used to test the logic of the ring buffer.
1090 Do not use it on production systems.
1091
1092 Only say Y if you understand what this does, and you
1093 still want it enabled. Otherwise say N
1094
1095config MMIOTRACE_TEST
1096 tristate "Test module for mmiotrace"
1097 depends on MMIOTRACE && m
1098 help
1099 This is a dumb module for testing mmiotrace. It is very dangerous
1100 as it will write garbage to IO memory starting at a given address.
1101 However, it should be safe to use on e.g. unused portion of VRAM.
1102
1103 Say N, unless you absolutely know what you are doing.
1104
1105config PREEMPTIRQ_DELAY_TEST
1106 tristate "Test module to create a preempt / IRQ disable delay thread to test latency tracers"
1107 depends on m
1108 help
1109 Select this option to build a test module that can help test latency
1110 tracers by executing a preempt or irq disable section with a user
1111 configurable delay. The module busy waits for the duration of the
1112 critical section.
1113
1114 For example, the following invocation generates a burst of three
1115 irq-disabled critical sections for 500us:
1116 modprobe preemptirq_delay_test test_mode=irq delay=500 burst_size=3
1117
1118 What's more, if you want to attach the test on the cpu which the latency
1119 tracer is running on, specify cpu_affinity=cpu_num at the end of the
1120 command.
1121
1122 If unsure, say N
1123
1124config SYNTH_EVENT_GEN_TEST
1125 tristate "Test module for in-kernel synthetic event generation"
1126 depends on SYNTH_EVENTS
1127 help
1128 This option creates a test module to check the base
1129 functionality of in-kernel synthetic event definition and
1130 generation.
1131
1132 To test, insert the module, and then check the trace buffer
1133 for the generated sample events.
1134
1135 If unsure, say N.
1136
1137config KPROBE_EVENT_GEN_TEST
1138 tristate "Test module for in-kernel kprobe event generation"
1139 depends on KPROBE_EVENTS
1140 help
1141 This option creates a test module to check the base
1142 functionality of in-kernel kprobe event definition.
1143
1144 To test, insert the module, and then check the trace buffer
1145 for the generated kprobe events.
1146
1147 If unsure, say N.
1148
1149config HIST_TRIGGERS_DEBUG
1150 bool "Hist trigger debug support"
1151 depends on HIST_TRIGGERS
1152 help
1153 Add "hist_debug" file for each event, which when read will
1154 dump out a bunch of internal details about the hist triggers
1155 defined on that event.
1156
1157 The hist_debug file serves a couple of purposes:
1158
1159 - Helps developers verify that nothing is broken.
1160
1161 - Provides educational information to support the details
1162 of the hist trigger internals as described by
1163 Documentation/trace/histogram-design.rst.
1164
1165 The hist_debug output only covers the data structures
1166 related to the histogram definitions themselves and doesn't
1167 display the internals of map buckets or variable values of
1168 running histograms.
1169
1170 If unsure, say N.
1171
1172source "kernel/trace/rv/Kconfig"
1173
1174endif # FTRACE