Loading...
1#
2# Architectures that offer an FUNCTION_TRACER implementation should
3# select HAVE_FUNCTION_TRACER:
4#
5
6config USER_STACKTRACE_SUPPORT
7 bool
8
9config NOP_TRACER
10 bool
11
12config HAVE_FTRACE_NMI_ENTER
13 bool
14 help
15 See Documentation/trace/ftrace-design.txt
16
17config HAVE_FUNCTION_TRACER
18 bool
19 help
20 See Documentation/trace/ftrace-design.txt
21
22config HAVE_FUNCTION_GRAPH_TRACER
23 bool
24 help
25 See Documentation/trace/ftrace-design.txt
26
27config HAVE_FUNCTION_GRAPH_FP_TEST
28 bool
29 help
30 See Documentation/trace/ftrace-design.txt
31
32config HAVE_FUNCTION_TRACE_MCOUNT_TEST
33 bool
34 help
35 See Documentation/trace/ftrace-design.txt
36
37config HAVE_DYNAMIC_FTRACE
38 bool
39 help
40 See Documentation/trace/ftrace-design.txt
41
42config HAVE_FTRACE_MCOUNT_RECORD
43 bool
44 help
45 See Documentation/trace/ftrace-design.txt
46
47config HAVE_SYSCALL_TRACEPOINTS
48 bool
49 help
50 See Documentation/trace/ftrace-design.txt
51
52config HAVE_C_RECORDMCOUNT
53 bool
54 help
55 C version of recordmcount available?
56
57config TRACER_MAX_TRACE
58 bool
59
60config RING_BUFFER
61 bool
62
63config FTRACE_NMI_ENTER
64 bool
65 depends on HAVE_FTRACE_NMI_ENTER
66 default y
67
68config EVENT_TRACING
69 select CONTEXT_SWITCH_TRACER
70 bool
71
72config EVENT_POWER_TRACING_DEPRECATED
73 depends on EVENT_TRACING
74 bool "Deprecated power event trace API, to be removed"
75 default y
76 help
77 Provides old power event types:
78 C-state/idle accounting events:
79 power:power_start
80 power:power_end
81 and old cpufreq accounting event:
82 power:power_frequency
83 This is for userspace compatibility
84 and will vanish after 5 kernel iterations,
85 namely 3.1.
86
87config CONTEXT_SWITCH_TRACER
88 bool
89
90config RING_BUFFER_ALLOW_SWAP
91 bool
92 help
93 Allow the use of ring_buffer_swap_cpu.
94 Adds a very slight overhead to tracing when enabled.
95
96# All tracer options should select GENERIC_TRACER. For those options that are
97# enabled by all tracers (context switch and event tracer) they select TRACING.
98# This allows those options to appear when no other tracer is selected. But the
99# options do not appear when something else selects it. We need the two options
100# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
101# hiding of the automatic options.
102
103config TRACING
104 bool
105 select DEBUG_FS
106 select RING_BUFFER
107 select STACKTRACE if STACKTRACE_SUPPORT
108 select TRACEPOINTS
109 select NOP_TRACER
110 select BINARY_PRINTF
111 select EVENT_TRACING
112
113config GENERIC_TRACER
114 bool
115 select TRACING
116
117#
118# Minimum requirements an architecture has to meet for us to
119# be able to offer generic tracing facilities:
120#
121config TRACING_SUPPORT
122 bool
123 # PPC32 has no irqflags tracing support, but it can use most of the
124 # tracers anyway, they were tested to build and work. Note that new
125 # exceptions to this list aren't welcomed, better implement the
126 # irqflags tracing for your architecture.
127 depends on TRACE_IRQFLAGS_SUPPORT || PPC32
128 depends on STACKTRACE_SUPPORT
129 default y
130
131if TRACING_SUPPORT
132
133menuconfig FTRACE
134 bool "Tracers"
135 default y if DEBUG_KERNEL
136 help
137 Enable the kernel tracing infrastructure.
138
139if FTRACE
140
141config FUNCTION_TRACER
142 bool "Kernel Function Tracer"
143 depends on HAVE_FUNCTION_TRACER
144 select KALLSYMS
145 select GENERIC_TRACER
146 select CONTEXT_SWITCH_TRACER
147 help
148 Enable the kernel to trace every kernel function. This is done
149 by using a compiler feature to insert a small, 5-byte No-Operation
150 instruction at the beginning of every kernel function, which NOP
151 sequence is then dynamically patched into a tracer call when
152 tracing is enabled by the administrator. If it's runtime disabled
153 (the bootup default), then the overhead of the instructions is very
154 small and not measurable even in micro-benchmarks.
155
156config FUNCTION_GRAPH_TRACER
157 bool "Kernel Function Graph Tracer"
158 depends on HAVE_FUNCTION_GRAPH_TRACER
159 depends on FUNCTION_TRACER
160 depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE
161 default y
162 help
163 Enable the kernel to trace a function at both its return
164 and its entry.
165 Its first purpose is to trace the duration of functions and
166 draw a call graph for each thread with some information like
167 the return value. This is done by setting the current return
168 address on the current task structure into a stack of calls.
169
170
171config IRQSOFF_TRACER
172 bool "Interrupts-off Latency Tracer"
173 default n
174 depends on TRACE_IRQFLAGS_SUPPORT
175 depends on !ARCH_USES_GETTIMEOFFSET
176 select TRACE_IRQFLAGS
177 select GENERIC_TRACER
178 select TRACER_MAX_TRACE
179 select RING_BUFFER_ALLOW_SWAP
180 help
181 This option measures the time spent in irqs-off critical
182 sections, with microsecond accuracy.
183
184 The default measurement method is a maximum search, which is
185 disabled by default and can be runtime (re-)started
186 via:
187
188 echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
189
190 (Note that kernel size and overhead increase with this option
191 enabled. This option and the preempt-off timing option can be
192 used together or separately.)
193
194config PREEMPT_TRACER
195 bool "Preemption-off Latency Tracer"
196 default n
197 depends on !ARCH_USES_GETTIMEOFFSET
198 depends on PREEMPT
199 select GENERIC_TRACER
200 select TRACER_MAX_TRACE
201 select RING_BUFFER_ALLOW_SWAP
202 help
203 This option measures the time spent in preemption-off critical
204 sections, with microsecond accuracy.
205
206 The default measurement method is a maximum search, which is
207 disabled by default and can be runtime (re-)started
208 via:
209
210 echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
211
212 (Note that kernel size and overhead increase with this option
213 enabled. This option and the irqs-off timing option can be
214 used together or separately.)
215
216config SCHED_TRACER
217 bool "Scheduling Latency Tracer"
218 select GENERIC_TRACER
219 select CONTEXT_SWITCH_TRACER
220 select TRACER_MAX_TRACE
221 help
222 This tracer tracks the latency of the highest priority task
223 to be scheduled in, starting from the point it has woken up.
224
225config ENABLE_DEFAULT_TRACERS
226 bool "Trace process context switches and events"
227 depends on !GENERIC_TRACER
228 select TRACING
229 help
230 This tracer hooks to various trace points in the kernel,
231 allowing the user to pick and choose which trace point they
232 want to trace. It also includes the sched_switch tracer plugin.
233
234config FTRACE_SYSCALLS
235 bool "Trace syscalls"
236 depends on HAVE_SYSCALL_TRACEPOINTS
237 select GENERIC_TRACER
238 select KALLSYMS
239 help
240 Basic tracer to catch the syscall entry and exit events.
241
242config TRACE_BRANCH_PROFILING
243 bool
244 select GENERIC_TRACER
245
246choice
247 prompt "Branch Profiling"
248 default BRANCH_PROFILE_NONE
249 help
250 The branch profiling is a software profiler. It will add hooks
251 into the C conditionals to test which path a branch takes.
252
253 The likely/unlikely profiler only looks at the conditions that
254 are annotated with a likely or unlikely macro.
255
256 The "all branch" profiler will profile every if-statement in the
257 kernel. This profiler will also enable the likely/unlikely
258 profiler.
259
260 Either of the above profilers adds a bit of overhead to the system.
261 If unsure, choose "No branch profiling".
262
263config BRANCH_PROFILE_NONE
264 bool "No branch profiling"
265 help
266 No branch profiling. Branch profiling adds a bit of overhead.
267 Only enable it if you want to analyse the branching behavior.
268 Otherwise keep it disabled.
269
270config PROFILE_ANNOTATED_BRANCHES
271 bool "Trace likely/unlikely profiler"
272 select TRACE_BRANCH_PROFILING
273 help
274 This tracer profiles all likely and unlikely macros
275 in the kernel. It will display the results in:
276
277 /sys/kernel/debug/tracing/trace_stat/branch_annotated
278
279 Note: this will add a significant overhead; only turn this
280 on if you need to profile the system's use of these macros.
281
282config PROFILE_ALL_BRANCHES
283 bool "Profile all if conditionals"
284 select TRACE_BRANCH_PROFILING
285 help
286 This tracer profiles all branch conditions. Every if ()
287 taken in the kernel is recorded whether it hit or miss.
288 The results will be displayed in:
289
290 /sys/kernel/debug/tracing/trace_stat/branch_all
291
292 This option also enables the likely/unlikely profiler.
293
294 This configuration, when enabled, will impose a great overhead
295 on the system. This should only be enabled when the system
296 is to be analyzed in much detail.
297endchoice
298
299config TRACING_BRANCHES
300 bool
301 help
302 Selected by tracers that will trace the likely and unlikely
303 conditions. This prevents the tracers themselves from being
304 profiled. Profiling the tracing infrastructure can only happen
305 when the likelys and unlikelys are not being traced.
306
307config BRANCH_TRACER
308 bool "Trace likely/unlikely instances"
309 depends on TRACE_BRANCH_PROFILING
310 select TRACING_BRANCHES
311 help
312 This traces the events of likely and unlikely condition
313 calls in the kernel. The difference between this and the
314 "Trace likely/unlikely profiler" is that this is not a
315 histogram of the callers, but actually places the calling
316 events into a running trace buffer to see when and where the
317 events happened, as well as their results.
318
319 Say N if unsure.
320
321config STACK_TRACER
322 bool "Trace max stack"
323 depends on HAVE_FUNCTION_TRACER
324 select FUNCTION_TRACER
325 select STACKTRACE
326 select KALLSYMS
327 help
328 This special tracer records the maximum stack footprint of the
329 kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
330
331 This tracer works by hooking into every function call that the
332 kernel executes, and keeping a maximum stack depth value and
333 stack-trace saved. If this is configured with DYNAMIC_FTRACE
334 then it will not have any overhead while the stack tracer
335 is disabled.
336
337 To enable the stack tracer on bootup, pass in 'stacktrace'
338 on the kernel command line.
339
340 The stack tracer can also be enabled or disabled via the
341 sysctl kernel.stack_tracer_enabled
342
343 Say N if unsure.
344
345config BLK_DEV_IO_TRACE
346 bool "Support for tracing block IO actions"
347 depends on SYSFS
348 depends on BLOCK
349 select RELAY
350 select DEBUG_FS
351 select TRACEPOINTS
352 select GENERIC_TRACER
353 select STACKTRACE
354 help
355 Say Y here if you want to be able to trace the block layer actions
356 on a given queue. Tracing allows you to see any traffic happening
357 on a block device queue. For more information (and the userspace
358 support tools needed), fetch the blktrace tools from:
359
360 git://git.kernel.dk/blktrace.git
361
362 Tracing also is possible using the ftrace interface, e.g.:
363
364 echo 1 > /sys/block/sda/sda1/trace/enable
365 echo blk > /sys/kernel/debug/tracing/current_tracer
366 cat /sys/kernel/debug/tracing/trace_pipe
367
368 If unsure, say N.
369
370config KPROBE_EVENT
371 depends on KPROBES
372 depends on HAVE_REGS_AND_STACK_ACCESS_API
373 bool "Enable kprobes-based dynamic events"
374 select TRACING
375 select PROBE_EVENTS
376 default y
377 help
378 This allows the user to add tracing events (similar to tracepoints)
379 on the fly via the ftrace interface. See
380 Documentation/trace/kprobetrace.txt for more details.
381
382 Those events can be inserted wherever kprobes can probe, and record
383 various register and memory values.
384
385 This option is also required by perf-probe subcommand of perf tools.
386 If you want to use perf tools, this option is strongly recommended.
387
388config UPROBE_EVENT
389 bool "Enable uprobes-based dynamic events"
390 depends on ARCH_SUPPORTS_UPROBES
391 depends on MMU
392 select UPROBES
393 select PROBE_EVENTS
394 select TRACING
395 default n
396 help
397 This allows the user to add tracing events on top of userspace
398 dynamic events (similar to tracepoints) on the fly via the trace
399 events interface. Those events can be inserted wherever uprobes
400 can probe, and record various registers.
401 This option is required if you plan to use perf-probe subcommand
402 of perf tools on user space applications.
403
404config PROBE_EVENTS
405 def_bool n
406
407config DYNAMIC_FTRACE
408 bool "enable/disable ftrace tracepoints dynamically"
409 depends on FUNCTION_TRACER
410 depends on HAVE_DYNAMIC_FTRACE
411 default y
412 help
413 This option will modify all the calls to ftrace dynamically
414 (will patch them out of the binary image and replace them
415 with a No-Op instruction) as they are called. A table is
416 created to dynamically enable them again.
417
418 This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
419 otherwise has native performance as long as no tracing is active.
420
421 The changes to the code are done by a kernel thread that
422 wakes up once a second and checks to see if any ftrace calls
423 were made. If so, it runs stop_machine (stops all CPUS)
424 and modifies the code to jump over the call to ftrace.
425
426config FUNCTION_PROFILER
427 bool "Kernel function profiler"
428 depends on FUNCTION_TRACER
429 default n
430 help
431 This option enables the kernel function profiler. A file is created
432 in debugfs called function_profile_enabled which defaults to zero.
433 When a 1 is echoed into this file profiling begins, and when a
434 zero is entered, profiling stops. A "functions" file is created in
435 the trace_stats directory; this file shows the list of functions that
436 have been hit and their counters.
437
438 If in doubt, say N.
439
440config FTRACE_MCOUNT_RECORD
441 def_bool y
442 depends on DYNAMIC_FTRACE
443 depends on HAVE_FTRACE_MCOUNT_RECORD
444
445config FTRACE_SELFTEST
446 bool
447
448config FTRACE_STARTUP_TEST
449 bool "Perform a startup test on ftrace"
450 depends on GENERIC_TRACER
451 select FTRACE_SELFTEST
452 help
453 This option performs a series of startup tests on ftrace. On bootup
454 a series of tests are made to verify that the tracer is
455 functioning properly. It will do tests on all the configured
456 tracers of ftrace.
457
458config EVENT_TRACE_TEST_SYSCALLS
459 bool "Run selftest on syscall events"
460 depends on FTRACE_STARTUP_TEST
461 help
462 This option will also enable testing every syscall event.
463 It only enables the event and disables it and runs various loads
464 with the event enabled. This adds a bit more time for kernel boot
465 up since it runs this on every system call defined.
466
467 TBD - enable a way to actually call the syscalls as we test their
468 events
469
470config MMIOTRACE
471 bool "Memory mapped IO tracing"
472 depends on HAVE_MMIOTRACE_SUPPORT && PCI
473 select GENERIC_TRACER
474 help
475 Mmiotrace traces Memory Mapped I/O access and is meant for
476 debugging and reverse engineering. It is called from the ioremap
477 implementation and works via page faults. Tracing is disabled by
478 default and can be enabled at run-time.
479
480 See Documentation/trace/mmiotrace.txt.
481 If you are not helping to develop drivers, say N.
482
483config MMIOTRACE_TEST
484 tristate "Test module for mmiotrace"
485 depends on MMIOTRACE && m
486 help
487 This is a dumb module for testing mmiotrace. It is very dangerous
488 as it will write garbage to IO memory starting at a given address.
489 However, it should be safe to use on e.g. unused portion of VRAM.
490
491 Say N, unless you absolutely know what you are doing.
492
493config RING_BUFFER_BENCHMARK
494 tristate "Ring buffer benchmark stress tester"
495 depends on RING_BUFFER
496 help
497 This option creates a test to stress the ring buffer and benchmark it.
498 It creates its own ring buffer such that it will not interfere with
499 any other users of the ring buffer (such as ftrace). It then creates
500 a producer and consumer that will run for 10 seconds and sleep for
501 10 seconds. Each interval it will print out the number of events
502 it recorded and give a rough estimate of how long each iteration took.
503
504 It does not disable interrupts or raise its priority, so it may be
505 affected by processes that are running.
506
507 If unsure, say N.
508
509endif # FTRACE
510
511endif # TRACING_SUPPORT
512
1#
2# Architectures that offer an FUNCTION_TRACER implementation should
3# select HAVE_FUNCTION_TRACER:
4#
5
6config USER_STACKTRACE_SUPPORT
7 bool
8
9config NOP_TRACER
10 bool
11
12config HAVE_FTRACE_NMI_ENTER
13 bool
14 help
15 See Documentation/trace/ftrace-design.txt
16
17config HAVE_FUNCTION_TRACER
18 bool
19 help
20 See Documentation/trace/ftrace-design.txt
21
22config HAVE_FUNCTION_GRAPH_TRACER
23 bool
24 help
25 See Documentation/trace/ftrace-design.txt
26
27config HAVE_FUNCTION_GRAPH_FP_TEST
28 bool
29 help
30 See Documentation/trace/ftrace-design.txt
31
32config HAVE_FUNCTION_TRACE_MCOUNT_TEST
33 bool
34 help
35 See Documentation/trace/ftrace-design.txt
36
37config HAVE_DYNAMIC_FTRACE
38 bool
39 help
40 See Documentation/trace/ftrace-design.txt
41
42config HAVE_FTRACE_MCOUNT_RECORD
43 bool
44 help
45 See Documentation/trace/ftrace-design.txt
46
47config HAVE_SYSCALL_TRACEPOINTS
48 bool
49 help
50 See Documentation/trace/ftrace-design.txt
51
52config HAVE_C_RECORDMCOUNT
53 bool
54 help
55 C version of recordmcount available?
56
57config TRACER_MAX_TRACE
58 bool
59
60config RING_BUFFER
61 bool
62
63config FTRACE_NMI_ENTER
64 bool
65 depends on HAVE_FTRACE_NMI_ENTER
66 default y
67
68config EVENT_TRACING
69 select CONTEXT_SWITCH_TRACER
70 bool
71
72config EVENT_POWER_TRACING_DEPRECATED
73 depends on EVENT_TRACING
74 bool "Deprecated power event trace API, to be removed"
75 default y
76 help
77 Provides old power event types:
78 C-state/idle accounting events:
79 power:power_start
80 power:power_end
81 and old cpufreq accounting event:
82 power:power_frequency
83 This is for userspace compatibility
84 and will vanish after 5 kernel iterations,
85 namely 3.1.
86
87config CONTEXT_SWITCH_TRACER
88 bool
89
90config RING_BUFFER_ALLOW_SWAP
91 bool
92 help
93 Allow the use of ring_buffer_swap_cpu.
94 Adds a very slight overhead to tracing when enabled.
95
96# All tracer options should select GENERIC_TRACER. For those options that are
97# enabled by all tracers (context switch and event tracer) they select TRACING.
98# This allows those options to appear when no other tracer is selected. But the
99# options do not appear when something else selects it. We need the two options
100# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
101# hiding of the automatic options.
102
103config TRACING
104 bool
105 select DEBUG_FS
106 select RING_BUFFER
107 select STACKTRACE if STACKTRACE_SUPPORT
108 select TRACEPOINTS
109 select NOP_TRACER
110 select BINARY_PRINTF
111 select EVENT_TRACING
112
113config GENERIC_TRACER
114 bool
115 select TRACING
116
117#
118# Minimum requirements an architecture has to meet for us to
119# be able to offer generic tracing facilities:
120#
121config TRACING_SUPPORT
122 bool
123 # PPC32 has no irqflags tracing support, but it can use most of the
124 # tracers anyway, they were tested to build and work. Note that new
125 # exceptions to this list aren't welcomed, better implement the
126 # irqflags tracing for your architecture.
127 depends on TRACE_IRQFLAGS_SUPPORT || PPC32
128 depends on STACKTRACE_SUPPORT
129 default y
130
131if TRACING_SUPPORT
132
133menuconfig FTRACE
134 bool "Tracers"
135 default y if DEBUG_KERNEL
136 help
137 Enable the kernel tracing infrastructure.
138
139if FTRACE
140
141config FUNCTION_TRACER
142 bool "Kernel Function Tracer"
143 depends on HAVE_FUNCTION_TRACER
144 select FRAME_POINTER if !ARM_UNWIND && !S390 && !MICROBLAZE
145 select KALLSYMS
146 select GENERIC_TRACER
147 select CONTEXT_SWITCH_TRACER
148 help
149 Enable the kernel to trace every kernel function. This is done
150 by using a compiler feature to insert a small, 5-byte No-Operation
151 instruction at the beginning of every kernel function, which NOP
152 sequence is then dynamically patched into a tracer call when
153 tracing is enabled by the administrator. If it's runtime disabled
154 (the bootup default), then the overhead of the instructions is very
155 small and not measurable even in micro-benchmarks.
156
157config FUNCTION_GRAPH_TRACER
158 bool "Kernel Function Graph Tracer"
159 depends on HAVE_FUNCTION_GRAPH_TRACER
160 depends on FUNCTION_TRACER
161 depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE
162 default y
163 help
164 Enable the kernel to trace a function at both its return
165 and its entry.
166 Its first purpose is to trace the duration of functions and
167 draw a call graph for each thread with some information like
168 the return value. This is done by setting the current return
169 address on the current task structure into a stack of calls.
170
171
172config IRQSOFF_TRACER
173 bool "Interrupts-off Latency Tracer"
174 default n
175 depends on TRACE_IRQFLAGS_SUPPORT
176 depends on !ARCH_USES_GETTIMEOFFSET
177 select TRACE_IRQFLAGS
178 select GENERIC_TRACER
179 select TRACER_MAX_TRACE
180 select RING_BUFFER_ALLOW_SWAP
181 help
182 This option measures the time spent in irqs-off critical
183 sections, with microsecond accuracy.
184
185 The default measurement method is a maximum search, which is
186 disabled by default and can be runtime (re-)started
187 via:
188
189 echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
190
191 (Note that kernel size and overhead increase with this option
192 enabled. This option and the preempt-off timing option can be
193 used together or separately.)
194
195config PREEMPT_TRACER
196 bool "Preemption-off Latency Tracer"
197 default n
198 depends on !ARCH_USES_GETTIMEOFFSET
199 depends on PREEMPT
200 select GENERIC_TRACER
201 select TRACER_MAX_TRACE
202 select RING_BUFFER_ALLOW_SWAP
203 help
204 This option measures the time spent in preemption-off critical
205 sections, with microsecond accuracy.
206
207 The default measurement method is a maximum search, which is
208 disabled by default and can be runtime (re-)started
209 via:
210
211 echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
212
213 (Note that kernel size and overhead increase with this option
214 enabled. This option and the irqs-off timing option can be
215 used together or separately.)
216
217config SCHED_TRACER
218 bool "Scheduling Latency Tracer"
219 select GENERIC_TRACER
220 select CONTEXT_SWITCH_TRACER
221 select TRACER_MAX_TRACE
222 help
223 This tracer tracks the latency of the highest priority task
224 to be scheduled in, starting from the point it has woken up.
225
226config ENABLE_DEFAULT_TRACERS
227 bool "Trace process context switches and events"
228 depends on !GENERIC_TRACER
229 select TRACING
230 help
231 This tracer hooks to various trace points in the kernel,
232 allowing the user to pick and choose which trace point they
233 want to trace. It also includes the sched_switch tracer plugin.
234
235config FTRACE_SYSCALLS
236 bool "Trace syscalls"
237 depends on HAVE_SYSCALL_TRACEPOINTS
238 select GENERIC_TRACER
239 select KALLSYMS
240 help
241 Basic tracer to catch the syscall entry and exit events.
242
243config TRACE_BRANCH_PROFILING
244 bool
245 select GENERIC_TRACER
246
247choice
248 prompt "Branch Profiling"
249 default BRANCH_PROFILE_NONE
250 help
251 The branch profiling is a software profiler. It will add hooks
252 into the C conditionals to test which path a branch takes.
253
254 The likely/unlikely profiler only looks at the conditions that
255 are annotated with a likely or unlikely macro.
256
257 The "all branch" profiler will profile every if-statement in the
258 kernel. This profiler will also enable the likely/unlikely
259 profiler.
260
261 Either of the above profilers adds a bit of overhead to the system.
262 If unsure, choose "No branch profiling".
263
264config BRANCH_PROFILE_NONE
265 bool "No branch profiling"
266 help
267 No branch profiling. Branch profiling adds a bit of overhead.
268 Only enable it if you want to analyse the branching behavior.
269 Otherwise keep it disabled.
270
271config PROFILE_ANNOTATED_BRANCHES
272 bool "Trace likely/unlikely profiler"
273 select TRACE_BRANCH_PROFILING
274 help
275 This tracer profiles all the the likely and unlikely macros
276 in the kernel. It will display the results in:
277
278 /sys/kernel/debug/tracing/trace_stat/branch_annotated
279
280 Note: this will add a significant overhead; only turn this
281 on if you need to profile the system's use of these macros.
282
283config PROFILE_ALL_BRANCHES
284 bool "Profile all if conditionals"
285 select TRACE_BRANCH_PROFILING
286 help
287 This tracer profiles all branch conditions. Every if ()
288 taken in the kernel is recorded whether it hit or miss.
289 The results will be displayed in:
290
291 /sys/kernel/debug/tracing/trace_stat/branch_all
292
293 This option also enables the likely/unlikely profiler.
294
295 This configuration, when enabled, will impose a great overhead
296 on the system. This should only be enabled when the system
297 is to be analyzed in much detail.
298endchoice
299
300config TRACING_BRANCHES
301 bool
302 help
303 Selected by tracers that will trace the likely and unlikely
304 conditions. This prevents the tracers themselves from being
305 profiled. Profiling the tracing infrastructure can only happen
306 when the likelys and unlikelys are not being traced.
307
308config BRANCH_TRACER
309 bool "Trace likely/unlikely instances"
310 depends on TRACE_BRANCH_PROFILING
311 select TRACING_BRANCHES
312 help
313 This traces the events of likely and unlikely condition
314 calls in the kernel. The difference between this and the
315 "Trace likely/unlikely profiler" is that this is not a
316 histogram of the callers, but actually places the calling
317 events into a running trace buffer to see when and where the
318 events happened, as well as their results.
319
320 Say N if unsure.
321
322config STACK_TRACER
323 bool "Trace max stack"
324 depends on HAVE_FUNCTION_TRACER
325 select FUNCTION_TRACER
326 select STACKTRACE
327 select KALLSYMS
328 help
329 This special tracer records the maximum stack footprint of the
330 kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
331
332 This tracer works by hooking into every function call that the
333 kernel executes, and keeping a maximum stack depth value and
334 stack-trace saved. If this is configured with DYNAMIC_FTRACE
335 then it will not have any overhead while the stack tracer
336 is disabled.
337
338 To enable the stack tracer on bootup, pass in 'stacktrace'
339 on the kernel command line.
340
341 The stack tracer can also be enabled or disabled via the
342 sysctl kernel.stack_tracer_enabled
343
344 Say N if unsure.
345
346config BLK_DEV_IO_TRACE
347 bool "Support for tracing block IO actions"
348 depends on SYSFS
349 depends on BLOCK
350 select RELAY
351 select DEBUG_FS
352 select TRACEPOINTS
353 select GENERIC_TRACER
354 select STACKTRACE
355 help
356 Say Y here if you want to be able to trace the block layer actions
357 on a given queue. Tracing allows you to see any traffic happening
358 on a block device queue. For more information (and the userspace
359 support tools needed), fetch the blktrace tools from:
360
361 git://git.kernel.dk/blktrace.git
362
363 Tracing also is possible using the ftrace interface, e.g.:
364
365 echo 1 > /sys/block/sda/sda1/trace/enable
366 echo blk > /sys/kernel/debug/tracing/current_tracer
367 cat /sys/kernel/debug/tracing/trace_pipe
368
369 If unsure, say N.
370
371config KPROBE_EVENT
372 depends on KPROBES
373 depends on HAVE_REGS_AND_STACK_ACCESS_API
374 bool "Enable kprobes-based dynamic events"
375 select TRACING
376 default y
377 help
378 This allows the user to add tracing events (similar to tracepoints)
379 on the fly via the ftrace interface. See
380 Documentation/trace/kprobetrace.txt for more details.
381
382 Those events can be inserted wherever kprobes can probe, and record
383 various register and memory values.
384
385 This option is also required by perf-probe subcommand of perf tools.
386 If you want to use perf tools, this option is strongly recommended.
387
388config DYNAMIC_FTRACE
389 bool "enable/disable ftrace tracepoints dynamically"
390 depends on FUNCTION_TRACER
391 depends on HAVE_DYNAMIC_FTRACE
392 default y
393 help
394 This option will modify all the calls to ftrace dynamically
395 (will patch them out of the binary image and replace them
396 with a No-Op instruction) as they are called. A table is
397 created to dynamically enable them again.
398
399 This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
400 otherwise has native performance as long as no tracing is active.
401
402 The changes to the code are done by a kernel thread that
403 wakes up once a second and checks to see if any ftrace calls
404 were made. If so, it runs stop_machine (stops all CPUS)
405 and modifies the code to jump over the call to ftrace.
406
407config FUNCTION_PROFILER
408 bool "Kernel function profiler"
409 depends on FUNCTION_TRACER
410 default n
411 help
412 This option enables the kernel function profiler. A file is created
413 in debugfs called function_profile_enabled which defaults to zero.
414 When a 1 is echoed into this file profiling begins, and when a
415 zero is entered, profiling stops. A "functions" file is created in
416 the trace_stats directory; this file shows the list of functions that
417 have been hit and their counters.
418
419 If in doubt, say N.
420
421config FTRACE_MCOUNT_RECORD
422 def_bool y
423 depends on DYNAMIC_FTRACE
424 depends on HAVE_FTRACE_MCOUNT_RECORD
425
426config FTRACE_SELFTEST
427 bool
428
429config FTRACE_STARTUP_TEST
430 bool "Perform a startup test on ftrace"
431 depends on GENERIC_TRACER
432 select FTRACE_SELFTEST
433 help
434 This option performs a series of startup tests on ftrace. On bootup
435 a series of tests are made to verify that the tracer is
436 functioning properly. It will do tests on all the configured
437 tracers of ftrace.
438
439config EVENT_TRACE_TEST_SYSCALLS
440 bool "Run selftest on syscall events"
441 depends on FTRACE_STARTUP_TEST
442 help
443 This option will also enable testing every syscall event.
444 It only enables the event and disables it and runs various loads
445 with the event enabled. This adds a bit more time for kernel boot
446 up since it runs this on every system call defined.
447
448 TBD - enable a way to actually call the syscalls as we test their
449 events
450
451config MMIOTRACE
452 bool "Memory mapped IO tracing"
453 depends on HAVE_MMIOTRACE_SUPPORT && PCI
454 select GENERIC_TRACER
455 help
456 Mmiotrace traces Memory Mapped I/O access and is meant for
457 debugging and reverse engineering. It is called from the ioremap
458 implementation and works via page faults. Tracing is disabled by
459 default and can be enabled at run-time.
460
461 See Documentation/trace/mmiotrace.txt.
462 If you are not helping to develop drivers, say N.
463
464config MMIOTRACE_TEST
465 tristate "Test module for mmiotrace"
466 depends on MMIOTRACE && m
467 help
468 This is a dumb module for testing mmiotrace. It is very dangerous
469 as it will write garbage to IO memory starting at a given address.
470 However, it should be safe to use on e.g. unused portion of VRAM.
471
472 Say N, unless you absolutely know what you are doing.
473
474config RING_BUFFER_BENCHMARK
475 tristate "Ring buffer benchmark stress tester"
476 depends on RING_BUFFER
477 help
478 This option creates a test to stress the ring buffer and benchmark it.
479 It creates its own ring buffer such that it will not interfere with
480 any other users of the ring buffer (such as ftrace). It then creates
481 a producer and consumer that will run for 10 seconds and sleep for
482 10 seconds. Each interval it will print out the number of events
483 it recorded and give a rough estimate of how long each iteration took.
484
485 It does not disable interrupts or raise its priority, so it may be
486 affected by processes that are running.
487
488 If unsure, say N.
489
490endif # FTRACE
491
492endif # TRACING_SUPPORT
493