Loading...
1#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
2#define __ARCH_ARM_MACH_OMAP2_SDRC_H
3
4/*
5 * OMAP2 SDRC register definitions
6 *
7 * Copyright (C) 2007 Texas Instruments, Inc.
8 * Copyright (C) 2007 Nokia Corporation
9 *
10 * Written by Paul Walmsley
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
16#undef DEBUG
17
18#include <plat/sdrc.h>
19
20#ifndef __ASSEMBLER__
21
22#include <linux/io.h>
23
24extern void __iomem *omap2_sdrc_base;
25extern void __iomem *omap2_sms_base;
26
27#define OMAP_SDRC_REGADDR(reg) (omap2_sdrc_base + (reg))
28#define OMAP_SMS_REGADDR(reg) (omap2_sms_base + (reg))
29
30/* SDRC global register get/set */
31
32static inline void sdrc_write_reg(u32 val, u16 reg)
33{
34 __raw_writel(val, OMAP_SDRC_REGADDR(reg));
35}
36
37static inline u32 sdrc_read_reg(u16 reg)
38{
39 return __raw_readl(OMAP_SDRC_REGADDR(reg));
40}
41
42/* SMS global register get/set */
43
44static inline void sms_write_reg(u32 val, u16 reg)
45{
46 __raw_writel(val, OMAP_SMS_REGADDR(reg));
47}
48
49static inline u32 sms_read_reg(u16 reg)
50{
51 return __raw_readl(OMAP_SMS_REGADDR(reg));
52}
53#else
54#define OMAP242X_SDRC_REGADDR(reg) \
55 OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
56#define OMAP243X_SDRC_REGADDR(reg) \
57 OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
58#define OMAP34XX_SDRC_REGADDR(reg) \
59 OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
60#endif /* __ASSEMBLER__ */
61
62/* Minimum frequency that the SDRC DLL can lock at */
63#define MIN_SDRC_DLL_LOCK_FREQ 83000000
64
65/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
66#define SDRC_MPURATE_SCALE 8
67
68/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
69#define SDRC_MPURATE_BASE_SHIFT 9
70
71/*
72 * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
73 * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
74 */
75#define SDRC_MPURATE_LOOPS 96
76
77#endif
1/* SPDX-License-Identifier: GPL-2.0-only */
2#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
3#define __ARCH_ARM_MACH_OMAP2_SDRC_H
4
5/*
6 * OMAP2/3 SDRC/SMS macros and prototypes
7 *
8 * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
9 * Copyright (C) 2007-2008 Nokia Corporation
10 *
11 * Paul Walmsley
12 * Tony Lindgren
13 * Richard Woodruff
14 */
15#undef DEBUG
16
17#ifndef __ASSEMBLER__
18
19#include <linux/io.h>
20
21extern void __iomem *omap2_sdrc_base;
22extern void __iomem *omap2_sms_base;
23
24#define OMAP_SDRC_REGADDR(reg) (omap2_sdrc_base + (reg))
25#define OMAP_SMS_REGADDR(reg) (omap2_sms_base + (reg))
26
27/* SDRC global register get/set */
28
29static inline void sdrc_write_reg(u32 val, u16 reg)
30{
31 writel_relaxed(val, OMAP_SDRC_REGADDR(reg));
32}
33
34static inline u32 sdrc_read_reg(u16 reg)
35{
36 return readl_relaxed(OMAP_SDRC_REGADDR(reg));
37}
38
39/* SMS global register get/set */
40
41static inline void sms_write_reg(u32 val, u16 reg)
42{
43 writel_relaxed(val, OMAP_SMS_REGADDR(reg));
44}
45
46static inline u32 sms_read_reg(u16 reg)
47{
48 return readl_relaxed(OMAP_SMS_REGADDR(reg));
49}
50
51extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms);
52
53
54/**
55 * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
56 * @rate: SDRC clock rate (in Hz)
57 * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
58 * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
59 * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
60 * @mr: Value to program to SDRC_MR for this rate
61 *
62 * This structure holds a pre-computed set of register values for the
63 * SDRC for a given SDRC clock rate and SDRAM chip. These are
64 * intended to be pre-computed and specified in an array in the board-*.c
65 * files. The structure is keyed off the 'rate' field.
66 */
67struct omap_sdrc_params {
68 unsigned long rate;
69 u32 actim_ctrla;
70 u32 actim_ctrlb;
71 u32 rfr_ctrl;
72 u32 mr;
73};
74
75#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
76void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
77 struct omap_sdrc_params *sdrc_cs1);
78#else
79static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
80 struct omap_sdrc_params *sdrc_cs1) {};
81#endif
82
83void omap2_sms_restore_context(void);
84
85struct memory_timings {
86 u32 m_type; /* ddr = 1, sdr = 0 */
87 u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
88 u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
89 u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
90 u32 base_cs; /* base chip select to use for calculations */
91};
92
93extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
94
95u32 omap2xxx_sdrc_dll_is_unlocked(void);
96u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
97
98
99#else
100#define OMAP242X_SDRC_REGADDR(reg) \
101 OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
102#define OMAP243X_SDRC_REGADDR(reg) \
103 OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
104#define OMAP34XX_SDRC_REGADDR(reg) \
105 OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
106
107#endif /* __ASSEMBLER__ */
108
109/* Minimum frequency that the SDRC DLL can lock at */
110#define MIN_SDRC_DLL_LOCK_FREQ 83000000
111
112/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
113#define SDRC_MPURATE_SCALE 8
114
115/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
116#define SDRC_MPURATE_BASE_SHIFT 9
117
118/*
119 * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
120 * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
121 */
122#define SDRC_MPURATE_LOOPS 96
123
124/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
125
126#define SDRC_SYSCONFIG 0x010
127#define SDRC_CS_CFG 0x040
128#define SDRC_SHARING 0x044
129#define SDRC_ERR_TYPE 0x04C
130#define SDRC_DLLA_CTRL 0x060
131#define SDRC_DLLA_STATUS 0x064
132#define SDRC_DLLB_CTRL 0x068
133#define SDRC_DLLB_STATUS 0x06C
134#define SDRC_POWER 0x070
135#define SDRC_MCFG_0 0x080
136#define SDRC_MR_0 0x084
137#define SDRC_EMR2_0 0x08c
138#define SDRC_ACTIM_CTRL_A_0 0x09c
139#define SDRC_ACTIM_CTRL_B_0 0x0a0
140#define SDRC_RFR_CTRL_0 0x0a4
141#define SDRC_MANUAL_0 0x0a8
142#define SDRC_MCFG_1 0x0B0
143#define SDRC_MR_1 0x0B4
144#define SDRC_EMR2_1 0x0BC
145#define SDRC_ACTIM_CTRL_A_1 0x0C4
146#define SDRC_ACTIM_CTRL_B_1 0x0C8
147#define SDRC_RFR_CTRL_1 0x0D4
148#define SDRC_MANUAL_1 0x0D8
149
150#define SDRC_POWER_AUTOCOUNT_SHIFT 8
151#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
152#define SDRC_POWER_CLKCTRL_SHIFT 4
153#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
154#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
155
156/*
157 * These values represent the number of memory clock cycles between
158 * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
159 * rows per device, and include a subtraction of a 50 cycle window in the
160 * event that the autorefresh command is delayed due to other SDRC activity.
161 * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
162 * counter reaches 0.
163 *
164 * These represent optimal values for common parts, it won't work for all.
165 * As long as you scale down, most parameters are still work, they just
166 * become sub-optimal. The RFR value goes in the opposite direction. If you
167 * don't adjust it down as your clock period increases the refresh interval
168 * will not be met. Setting all parameters for complete worst case may work,
169 * but may cut memory performance by 2x. Due to errata the DLLs need to be
170 * unlocked and their value needs run time calibration. A dynamic call is
171 * need for that as no single right value exists across production samples.
172 *
173 * Only the FULL speed values are given. Current code is such that rate
174 * changes must be made at DPLLoutx2. The actual value adjustment for low
175 * frequency operation will be handled by omap_set_performance()
176 *
177 * By having the boot loader boot up in the fastest L4 speed available likely
178 * will result in something which you can switch between.
179 */
180#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
181#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
182#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
183#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
184#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
185
186
187/*
188 * SMS register access
189 */
190
191#define OMAP242X_SMS_REGADDR(reg) \
192 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
193#define OMAP243X_SMS_REGADDR(reg) \
194 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
195#define OMAP343X_SMS_REGADDR(reg) \
196 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
197
198/* SMS register offsets - read/write with sms_{read,write}_reg() */
199
200#define SMS_SYSCONFIG 0x010
201/* REVISIT: fill in other SMS registers here */
202
203
204
205#endif