Loading...
1#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
2#define __ARCH_ARM_MACH_OMAP2_SDRC_H
3
4/*
5 * OMAP2 SDRC register definitions
6 *
7 * Copyright (C) 2007 Texas Instruments, Inc.
8 * Copyright (C) 2007 Nokia Corporation
9 *
10 * Written by Paul Walmsley
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
16#undef DEBUG
17
18#include <plat/sdrc.h>
19
20#ifndef __ASSEMBLER__
21
22#include <linux/io.h>
23
24extern void __iomem *omap2_sdrc_base;
25extern void __iomem *omap2_sms_base;
26
27#define OMAP_SDRC_REGADDR(reg) (omap2_sdrc_base + (reg))
28#define OMAP_SMS_REGADDR(reg) (omap2_sms_base + (reg))
29
30/* SDRC global register get/set */
31
32static inline void sdrc_write_reg(u32 val, u16 reg)
33{
34 __raw_writel(val, OMAP_SDRC_REGADDR(reg));
35}
36
37static inline u32 sdrc_read_reg(u16 reg)
38{
39 return __raw_readl(OMAP_SDRC_REGADDR(reg));
40}
41
42/* SMS global register get/set */
43
44static inline void sms_write_reg(u32 val, u16 reg)
45{
46 __raw_writel(val, OMAP_SMS_REGADDR(reg));
47}
48
49static inline u32 sms_read_reg(u16 reg)
50{
51 return __raw_readl(OMAP_SMS_REGADDR(reg));
52}
53#else
54#define OMAP242X_SDRC_REGADDR(reg) \
55 OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
56#define OMAP243X_SDRC_REGADDR(reg) \
57 OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
58#define OMAP34XX_SDRC_REGADDR(reg) \
59 OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
60#endif /* __ASSEMBLER__ */
61
62/* Minimum frequency that the SDRC DLL can lock at */
63#define MIN_SDRC_DLL_LOCK_FREQ 83000000
64
65/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
66#define SDRC_MPURATE_SCALE 8
67
68/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
69#define SDRC_MPURATE_BASE_SHIFT 9
70
71/*
72 * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
73 * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
74 */
75#define SDRC_MPURATE_LOOPS 96
76
77#endif
1/* SPDX-License-Identifier: GPL-2.0-only */
2#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
3#define __ARCH_ARM_MACH_OMAP2_SDRC_H
4
5/*
6 * OMAP2/3 SDRC/SMS macros and prototypes
7 *
8 * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
9 * Copyright (C) 2007-2008 Nokia Corporation
10 *
11 * Paul Walmsley
12 * Tony Lindgren
13 * Richard Woodruff
14 */
15#undef DEBUG
16
17#ifndef __ASSEMBLER__
18
19#include <linux/io.h>
20
21extern void __iomem *omap2_sdrc_base;
22extern void __iomem *omap2_sms_base;
23
24#define OMAP_SDRC_REGADDR(reg) (omap2_sdrc_base + (reg))
25#define OMAP_SMS_REGADDR(reg) (omap2_sms_base + (reg))
26
27/* SDRC global register get/set */
28
29static inline void sdrc_write_reg(u32 val, u16 reg)
30{
31 writel_relaxed(val, OMAP_SDRC_REGADDR(reg));
32}
33
34static inline u32 sdrc_read_reg(u16 reg)
35{
36 return readl_relaxed(OMAP_SDRC_REGADDR(reg));
37}
38
39/* SMS global register get/set */
40
41static inline void sms_write_reg(u32 val, u16 reg)
42{
43 writel_relaxed(val, OMAP_SMS_REGADDR(reg));
44}
45
46static inline u32 sms_read_reg(u16 reg)
47{
48 return readl_relaxed(OMAP_SMS_REGADDR(reg));
49}
50
51extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms);
52
53
54/**
55 * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
56 * @rate: SDRC clock rate (in Hz)
57 * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
58 * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
59 * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
60 * @mr: Value to program to SDRC_MR for this rate
61 *
62 * This structure holds a pre-computed set of register values for the
63 * SDRC for a given SDRC clock rate and SDRAM chip. These are
64 * intended to be pre-computed and specified in an array in the board-*.c
65 * files. The structure is keyed off the 'rate' field.
66 */
67struct omap_sdrc_params {
68 unsigned long rate;
69 u32 actim_ctrla;
70 u32 actim_ctrlb;
71 u32 rfr_ctrl;
72 u32 mr;
73};
74
75#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
76void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
77 struct omap_sdrc_params *sdrc_cs1);
78#else
79static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
80 struct omap_sdrc_params *sdrc_cs1) {};
81#endif
82
83int omap2_sdrc_get_params(unsigned long r,
84 struct omap_sdrc_params **sdrc_cs0,
85 struct omap_sdrc_params **sdrc_cs1);
86void omap2_sms_save_context(void);
87void omap2_sms_restore_context(void);
88
89struct memory_timings {
90 u32 m_type; /* ddr = 1, sdr = 0 */
91 u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
92 u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
93 u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
94 u32 base_cs; /* base chip select to use for calculations */
95};
96
97extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
98struct omap_sdrc_params *rx51_get_sdram_timings(void);
99
100u32 omap2xxx_sdrc_dll_is_unlocked(void);
101u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
102
103
104#else
105#define OMAP242X_SDRC_REGADDR(reg) \
106 OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
107#define OMAP243X_SDRC_REGADDR(reg) \
108 OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
109#define OMAP34XX_SDRC_REGADDR(reg) \
110 OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
111
112#endif /* __ASSEMBLER__ */
113
114/* Minimum frequency that the SDRC DLL can lock at */
115#define MIN_SDRC_DLL_LOCK_FREQ 83000000
116
117/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
118#define SDRC_MPURATE_SCALE 8
119
120/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
121#define SDRC_MPURATE_BASE_SHIFT 9
122
123/*
124 * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
125 * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
126 */
127#define SDRC_MPURATE_LOOPS 96
128
129/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
130
131#define SDRC_SYSCONFIG 0x010
132#define SDRC_CS_CFG 0x040
133#define SDRC_SHARING 0x044
134#define SDRC_ERR_TYPE 0x04C
135#define SDRC_DLLA_CTRL 0x060
136#define SDRC_DLLA_STATUS 0x064
137#define SDRC_DLLB_CTRL 0x068
138#define SDRC_DLLB_STATUS 0x06C
139#define SDRC_POWER 0x070
140#define SDRC_MCFG_0 0x080
141#define SDRC_MR_0 0x084
142#define SDRC_EMR2_0 0x08c
143#define SDRC_ACTIM_CTRL_A_0 0x09c
144#define SDRC_ACTIM_CTRL_B_0 0x0a0
145#define SDRC_RFR_CTRL_0 0x0a4
146#define SDRC_MANUAL_0 0x0a8
147#define SDRC_MCFG_1 0x0B0
148#define SDRC_MR_1 0x0B4
149#define SDRC_EMR2_1 0x0BC
150#define SDRC_ACTIM_CTRL_A_1 0x0C4
151#define SDRC_ACTIM_CTRL_B_1 0x0C8
152#define SDRC_RFR_CTRL_1 0x0D4
153#define SDRC_MANUAL_1 0x0D8
154
155#define SDRC_POWER_AUTOCOUNT_SHIFT 8
156#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
157#define SDRC_POWER_CLKCTRL_SHIFT 4
158#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
159#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
160
161/*
162 * These values represent the number of memory clock cycles between
163 * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
164 * rows per device, and include a subtraction of a 50 cycle window in the
165 * event that the autorefresh command is delayed due to other SDRC activity.
166 * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
167 * counter reaches 0.
168 *
169 * These represent optimal values for common parts, it won't work for all.
170 * As long as you scale down, most parameters are still work, they just
171 * become sub-optimal. The RFR value goes in the opposite direction. If you
172 * don't adjust it down as your clock period increases the refresh interval
173 * will not be met. Setting all parameters for complete worst case may work,
174 * but may cut memory performance by 2x. Due to errata the DLLs need to be
175 * unlocked and their value needs run time calibration. A dynamic call is
176 * need for that as no single right value exists across production samples.
177 *
178 * Only the FULL speed values are given. Current code is such that rate
179 * changes must be made at DPLLoutx2. The actual value adjustment for low
180 * frequency operation will be handled by omap_set_performance()
181 *
182 * By having the boot loader boot up in the fastest L4 speed available likely
183 * will result in something which you can switch between.
184 */
185#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
186#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
187#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
188#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
189#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
190
191
192/*
193 * SMS register access
194 */
195
196#define OMAP242X_SMS_REGADDR(reg) \
197 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
198#define OMAP243X_SMS_REGADDR(reg) \
199 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
200#define OMAP343X_SMS_REGADDR(reg) \
201 (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
202
203/* SMS register offsets - read/write with sms_{read,write}_reg() */
204
205#define SMS_SYSCONFIG 0x010
206/* REVISIT: fill in other SMS registers here */
207
208
209
210#endif