Loading...
1/*
2 * USB Attached SCSI
3 * Note that this is not the same as the USB Mass Storage driver
4 *
5 * Copyright Matthew Wilcox for Intel Corp, 2010
6 * Copyright Sarah Sharp for Intel Corp, 2010
7 *
8 * Distributed under the terms of the GNU GPL, version two.
9 */
10
11#include <linux/blkdev.h>
12#include <linux/slab.h>
13#include <linux/types.h>
14#include <linux/module.h>
15#include <linux/usb.h>
16#include <linux/usb/hcd.h>
17#include <linux/usb/storage.h>
18#include <linux/usb/uas.h>
19
20#include <scsi/scsi.h>
21#include <scsi/scsi_dbg.h>
22#include <scsi/scsi_cmnd.h>
23#include <scsi/scsi_device.h>
24#include <scsi/scsi_host.h>
25#include <scsi/scsi_tcq.h>
26
27/*
28 * The r00-r01c specs define this version of the SENSE IU data structure.
29 * It's still in use by several different firmware releases.
30 */
31struct sense_iu_old {
32 __u8 iu_id;
33 __u8 rsvd1;
34 __be16 tag;
35 __be16 len;
36 __u8 status;
37 __u8 service_response;
38 __u8 sense[SCSI_SENSE_BUFFERSIZE];
39};
40
41struct uas_dev_info {
42 struct usb_interface *intf;
43 struct usb_device *udev;
44 int qdepth;
45 unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
46 unsigned use_streams:1;
47 unsigned uas_sense_old:1;
48 struct scsi_cmnd *cmnd;
49 struct urb *status_urb; /* used only if stream support is available */
50};
51
52enum {
53 ALLOC_STATUS_URB = (1 << 0),
54 SUBMIT_STATUS_URB = (1 << 1),
55 ALLOC_DATA_IN_URB = (1 << 2),
56 SUBMIT_DATA_IN_URB = (1 << 3),
57 ALLOC_DATA_OUT_URB = (1 << 4),
58 SUBMIT_DATA_OUT_URB = (1 << 5),
59 ALLOC_CMD_URB = (1 << 6),
60 SUBMIT_CMD_URB = (1 << 7),
61};
62
63/* Overrides scsi_pointer */
64struct uas_cmd_info {
65 unsigned int state;
66 unsigned int stream;
67 struct urb *cmd_urb;
68 /* status_urb is used only if stream support isn't available */
69 struct urb *status_urb;
70 struct urb *data_in_urb;
71 struct urb *data_out_urb;
72 struct list_head list;
73};
74
75/* I hate forward declarations, but I actually have a loop */
76static int uas_submit_urbs(struct scsi_cmnd *cmnd,
77 struct uas_dev_info *devinfo, gfp_t gfp);
78static void uas_do_work(struct work_struct *work);
79
80static DECLARE_WORK(uas_work, uas_do_work);
81static DEFINE_SPINLOCK(uas_work_lock);
82static LIST_HEAD(uas_work_list);
83
84static void uas_do_work(struct work_struct *work)
85{
86 struct uas_cmd_info *cmdinfo;
87 struct uas_cmd_info *temp;
88 struct list_head list;
89 int err;
90
91 spin_lock_irq(&uas_work_lock);
92 list_replace_init(&uas_work_list, &list);
93 spin_unlock_irq(&uas_work_lock);
94
95 list_for_each_entry_safe(cmdinfo, temp, &list, list) {
96 struct scsi_pointer *scp = (void *)cmdinfo;
97 struct scsi_cmnd *cmnd = container_of(scp,
98 struct scsi_cmnd, SCp);
99 err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
100 if (err) {
101 list_del(&cmdinfo->list);
102 spin_lock_irq(&uas_work_lock);
103 list_add_tail(&cmdinfo->list, &uas_work_list);
104 spin_unlock_irq(&uas_work_lock);
105 schedule_work(&uas_work);
106 }
107 }
108}
109
110static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
111{
112 struct sense_iu *sense_iu = urb->transfer_buffer;
113 struct scsi_device *sdev = cmnd->device;
114
115 if (urb->actual_length > 16) {
116 unsigned len = be16_to_cpup(&sense_iu->len);
117 if (len + 16 != urb->actual_length) {
118 int newlen = min(len + 16, urb->actual_length) - 16;
119 if (newlen < 0)
120 newlen = 0;
121 sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
122 "disagrees with IU sense data length %d, "
123 "using %d bytes of sense data\n", __func__,
124 urb->actual_length, len, newlen);
125 len = newlen;
126 }
127 memcpy(cmnd->sense_buffer, sense_iu->sense, len);
128 }
129
130 cmnd->result = sense_iu->status;
131 cmnd->scsi_done(cmnd);
132}
133
134static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
135{
136 struct sense_iu_old *sense_iu = urb->transfer_buffer;
137 struct scsi_device *sdev = cmnd->device;
138
139 if (urb->actual_length > 8) {
140 unsigned len = be16_to_cpup(&sense_iu->len) - 2;
141 if (len + 8 != urb->actual_length) {
142 int newlen = min(len + 8, urb->actual_length) - 8;
143 if (newlen < 0)
144 newlen = 0;
145 sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
146 "disagrees with IU sense data length %d, "
147 "using %d bytes of sense data\n", __func__,
148 urb->actual_length, len, newlen);
149 len = newlen;
150 }
151 memcpy(cmnd->sense_buffer, sense_iu->sense, len);
152 }
153
154 cmnd->result = sense_iu->status;
155 cmnd->scsi_done(cmnd);
156}
157
158static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
159 unsigned direction)
160{
161 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
162 int err;
163
164 cmdinfo->state = direction;
165 err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
166 if (err) {
167 spin_lock(&uas_work_lock);
168 list_add_tail(&cmdinfo->list, &uas_work_list);
169 spin_unlock(&uas_work_lock);
170 schedule_work(&uas_work);
171 }
172}
173
174static void uas_stat_cmplt(struct urb *urb)
175{
176 struct iu *iu = urb->transfer_buffer;
177 struct Scsi_Host *shost = urb->context;
178 struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
179 struct scsi_cmnd *cmnd;
180 u16 tag;
181 int ret;
182
183 if (urb->status) {
184 dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status);
185 if (devinfo->use_streams)
186 usb_free_urb(urb);
187 return;
188 }
189
190 tag = be16_to_cpup(&iu->tag) - 1;
191 if (tag == 0)
192 cmnd = devinfo->cmnd;
193 else
194 cmnd = scsi_host_find_tag(shost, tag - 1);
195 if (!cmnd) {
196 if (devinfo->use_streams) {
197 usb_free_urb(urb);
198 return;
199 }
200 ret = usb_submit_urb(urb, GFP_ATOMIC);
201 if (ret)
202 dev_err(&urb->dev->dev, "failed submit status urb\n");
203 return;
204 }
205
206 switch (iu->iu_id) {
207 case IU_ID_STATUS:
208 if (devinfo->cmnd == cmnd)
209 devinfo->cmnd = NULL;
210
211 if (urb->actual_length < 16)
212 devinfo->uas_sense_old = 1;
213 if (devinfo->uas_sense_old)
214 uas_sense_old(urb, cmnd);
215 else
216 uas_sense(urb, cmnd);
217 break;
218 case IU_ID_READ_READY:
219 uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
220 break;
221 case IU_ID_WRITE_READY:
222 uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
223 break;
224 default:
225 scmd_printk(KERN_ERR, cmnd,
226 "Bogus IU (%d) received on status pipe\n", iu->iu_id);
227 }
228
229 if (devinfo->use_streams) {
230 usb_free_urb(urb);
231 return;
232 }
233
234 ret = usb_submit_urb(urb, GFP_ATOMIC);
235 if (ret)
236 dev_err(&urb->dev->dev, "failed submit status urb\n");
237}
238
239static void uas_data_cmplt(struct urb *urb)
240{
241 struct scsi_data_buffer *sdb = urb->context;
242 sdb->resid = sdb->length - urb->actual_length;
243 usb_free_urb(urb);
244}
245
246static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
247 unsigned int pipe, u16 stream_id,
248 struct scsi_data_buffer *sdb,
249 enum dma_data_direction dir)
250{
251 struct usb_device *udev = devinfo->udev;
252 struct urb *urb = usb_alloc_urb(0, gfp);
253
254 if (!urb)
255 goto out;
256 usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt,
257 sdb);
258 if (devinfo->use_streams)
259 urb->stream_id = stream_id;
260 urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
261 urb->sg = sdb->table.sgl;
262 out:
263 return urb;
264}
265
266static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
267 struct Scsi_Host *shost, u16 stream_id)
268{
269 struct usb_device *udev = devinfo->udev;
270 struct urb *urb = usb_alloc_urb(0, gfp);
271 struct sense_iu *iu;
272
273 if (!urb)
274 goto out;
275
276 iu = kzalloc(sizeof(*iu), gfp);
277 if (!iu)
278 goto free;
279
280 usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
281 uas_stat_cmplt, shost);
282 urb->stream_id = stream_id;
283 urb->transfer_flags |= URB_FREE_BUFFER;
284 out:
285 return urb;
286 free:
287 usb_free_urb(urb);
288 return NULL;
289}
290
291static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
292 struct scsi_cmnd *cmnd, u16 stream_id)
293{
294 struct usb_device *udev = devinfo->udev;
295 struct scsi_device *sdev = cmnd->device;
296 struct urb *urb = usb_alloc_urb(0, gfp);
297 struct command_iu *iu;
298 int len;
299
300 if (!urb)
301 goto out;
302
303 len = cmnd->cmd_len - 16;
304 if (len < 0)
305 len = 0;
306 len = ALIGN(len, 4);
307 iu = kzalloc(sizeof(*iu) + len, gfp);
308 if (!iu)
309 goto free;
310
311 iu->iu_id = IU_ID_COMMAND;
312 if (blk_rq_tagged(cmnd->request))
313 iu->tag = cpu_to_be16(cmnd->request->tag + 2);
314 else
315 iu->tag = cpu_to_be16(1);
316 iu->prio_attr = UAS_SIMPLE_TAG;
317 iu->len = len;
318 int_to_scsilun(sdev->lun, &iu->lun);
319 memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
320
321 usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
322 usb_free_urb, NULL);
323 urb->transfer_flags |= URB_FREE_BUFFER;
324 out:
325 return urb;
326 free:
327 usb_free_urb(urb);
328 return NULL;
329}
330
331/*
332 * Why should I request the Status IU before sending the Command IU? Spec
333 * says to, but also says the device may receive them in any order. Seems
334 * daft to me.
335 */
336
337static int uas_submit_urbs(struct scsi_cmnd *cmnd,
338 struct uas_dev_info *devinfo, gfp_t gfp)
339{
340 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
341
342 if (cmdinfo->state & ALLOC_STATUS_URB) {
343 cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp,
344 cmnd->device->host, cmdinfo->stream);
345 if (!cmdinfo->status_urb)
346 return SCSI_MLQUEUE_DEVICE_BUSY;
347 cmdinfo->state &= ~ALLOC_STATUS_URB;
348 }
349
350 if (cmdinfo->state & SUBMIT_STATUS_URB) {
351 if (usb_submit_urb(cmdinfo->status_urb, gfp)) {
352 scmd_printk(KERN_INFO, cmnd,
353 "sense urb submission failure\n");
354 return SCSI_MLQUEUE_DEVICE_BUSY;
355 }
356 cmdinfo->state &= ~SUBMIT_STATUS_URB;
357 }
358
359 if (cmdinfo->state & ALLOC_DATA_IN_URB) {
360 cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
361 devinfo->data_in_pipe, cmdinfo->stream,
362 scsi_in(cmnd), DMA_FROM_DEVICE);
363 if (!cmdinfo->data_in_urb)
364 return SCSI_MLQUEUE_DEVICE_BUSY;
365 cmdinfo->state &= ~ALLOC_DATA_IN_URB;
366 }
367
368 if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
369 if (usb_submit_urb(cmdinfo->data_in_urb, gfp)) {
370 scmd_printk(KERN_INFO, cmnd,
371 "data in urb submission failure\n");
372 return SCSI_MLQUEUE_DEVICE_BUSY;
373 }
374 cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
375 }
376
377 if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
378 cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
379 devinfo->data_out_pipe, cmdinfo->stream,
380 scsi_out(cmnd), DMA_TO_DEVICE);
381 if (!cmdinfo->data_out_urb)
382 return SCSI_MLQUEUE_DEVICE_BUSY;
383 cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
384 }
385
386 if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
387 if (usb_submit_urb(cmdinfo->data_out_urb, gfp)) {
388 scmd_printk(KERN_INFO, cmnd,
389 "data out urb submission failure\n");
390 return SCSI_MLQUEUE_DEVICE_BUSY;
391 }
392 cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
393 }
394
395 if (cmdinfo->state & ALLOC_CMD_URB) {
396 cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd,
397 cmdinfo->stream);
398 if (!cmdinfo->cmd_urb)
399 return SCSI_MLQUEUE_DEVICE_BUSY;
400 cmdinfo->state &= ~ALLOC_CMD_URB;
401 }
402
403 if (cmdinfo->state & SUBMIT_CMD_URB) {
404 if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) {
405 scmd_printk(KERN_INFO, cmnd,
406 "cmd urb submission failure\n");
407 return SCSI_MLQUEUE_DEVICE_BUSY;
408 }
409 cmdinfo->state &= ~SUBMIT_CMD_URB;
410 }
411
412 return 0;
413}
414
415static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
416 void (*done)(struct scsi_cmnd *))
417{
418 struct scsi_device *sdev = cmnd->device;
419 struct uas_dev_info *devinfo = sdev->hostdata;
420 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
421 int err;
422
423 BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
424
425 if (devinfo->cmnd)
426 return SCSI_MLQUEUE_DEVICE_BUSY;
427
428 if (blk_rq_tagged(cmnd->request)) {
429 cmdinfo->stream = cmnd->request->tag + 2;
430 } else {
431 devinfo->cmnd = cmnd;
432 cmdinfo->stream = 1;
433 }
434
435 cmnd->scsi_done = done;
436
437 cmdinfo->state = ALLOC_STATUS_URB | SUBMIT_STATUS_URB |
438 ALLOC_CMD_URB | SUBMIT_CMD_URB;
439
440 switch (cmnd->sc_data_direction) {
441 case DMA_FROM_DEVICE:
442 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
443 break;
444 case DMA_BIDIRECTIONAL:
445 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
446 case DMA_TO_DEVICE:
447 cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
448 case DMA_NONE:
449 break;
450 }
451
452 if (!devinfo->use_streams) {
453 cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB |
454 ALLOC_STATUS_URB | SUBMIT_STATUS_URB);
455 cmdinfo->stream = 0;
456 }
457
458 err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
459 if (err) {
460 /* If we did nothing, give up now */
461 if (cmdinfo->state & SUBMIT_STATUS_URB) {
462 usb_free_urb(cmdinfo->status_urb);
463 return SCSI_MLQUEUE_DEVICE_BUSY;
464 }
465 spin_lock(&uas_work_lock);
466 list_add_tail(&cmdinfo->list, &uas_work_list);
467 spin_unlock(&uas_work_lock);
468 schedule_work(&uas_work);
469 }
470
471 return 0;
472}
473
474static DEF_SCSI_QCMD(uas_queuecommand)
475
476static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
477{
478 struct scsi_device *sdev = cmnd->device;
479 sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
480 cmnd->request->tag);
481
482/* XXX: Send ABORT TASK Task Management command */
483 return FAILED;
484}
485
486static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
487{
488 struct scsi_device *sdev = cmnd->device;
489 sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
490 cmnd->request->tag);
491
492/* XXX: Send LOGICAL UNIT RESET Task Management command */
493 return FAILED;
494}
495
496static int uas_eh_target_reset_handler(struct scsi_cmnd *cmnd)
497{
498 struct scsi_device *sdev = cmnd->device;
499 sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
500 cmnd->request->tag);
501
502/* XXX: Can we reset just the one USB interface?
503 * Would calling usb_set_interface() have the right effect?
504 */
505 return FAILED;
506}
507
508static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
509{
510 struct scsi_device *sdev = cmnd->device;
511 struct uas_dev_info *devinfo = sdev->hostdata;
512 struct usb_device *udev = devinfo->udev;
513
514 sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
515 cmnd->request->tag);
516
517 if (usb_reset_device(udev))
518 return SUCCESS;
519
520 return FAILED;
521}
522
523static int uas_slave_alloc(struct scsi_device *sdev)
524{
525 sdev->hostdata = (void *)sdev->host->hostdata[0];
526 return 0;
527}
528
529static int uas_slave_configure(struct scsi_device *sdev)
530{
531 struct uas_dev_info *devinfo = sdev->hostdata;
532 scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
533 scsi_activate_tcq(sdev, devinfo->qdepth - 2);
534 return 0;
535}
536
537static struct scsi_host_template uas_host_template = {
538 .module = THIS_MODULE,
539 .name = "uas",
540 .queuecommand = uas_queuecommand,
541 .slave_alloc = uas_slave_alloc,
542 .slave_configure = uas_slave_configure,
543 .eh_abort_handler = uas_eh_abort_handler,
544 .eh_device_reset_handler = uas_eh_device_reset_handler,
545 .eh_target_reset_handler = uas_eh_target_reset_handler,
546 .eh_bus_reset_handler = uas_eh_bus_reset_handler,
547 .can_queue = 65536, /* Is there a limit on the _host_ ? */
548 .this_id = -1,
549 .sg_tablesize = SG_NONE,
550 .cmd_per_lun = 1, /* until we override it */
551 .skip_settle_delay = 1,
552 .ordered_tag = 1,
553};
554
555static struct usb_device_id uas_usb_ids[] = {
556 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
557 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
558 /* 0xaa is a prototype device I happen to have access to */
559 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, 0xaa) },
560 { }
561};
562MODULE_DEVICE_TABLE(usb, uas_usb_ids);
563
564static int uas_is_interface(struct usb_host_interface *intf)
565{
566 return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
567 intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
568 intf->desc.bInterfaceProtocol == USB_PR_UAS);
569}
570
571static int uas_isnt_supported(struct usb_device *udev)
572{
573 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
574
575 dev_warn(&udev->dev, "The driver for the USB controller %s does not "
576 "support scatter-gather which is\n",
577 hcd->driver->description);
578 dev_warn(&udev->dev, "required by the UAS driver. Please try an"
579 "alternative USB controller if you wish to use UAS.\n");
580 return -ENODEV;
581}
582
583static int uas_switch_interface(struct usb_device *udev,
584 struct usb_interface *intf)
585{
586 int i;
587 int sg_supported = udev->bus->sg_tablesize != 0;
588
589 for (i = 0; i < intf->num_altsetting; i++) {
590 struct usb_host_interface *alt = &intf->altsetting[i];
591
592 if (uas_is_interface(alt)) {
593 if (!sg_supported)
594 return uas_isnt_supported(udev);
595 return usb_set_interface(udev,
596 alt->desc.bInterfaceNumber,
597 alt->desc.bAlternateSetting);
598 }
599 }
600
601 return -ENODEV;
602}
603
604static void uas_configure_endpoints(struct uas_dev_info *devinfo)
605{
606 struct usb_host_endpoint *eps[4] = { };
607 struct usb_interface *intf = devinfo->intf;
608 struct usb_device *udev = devinfo->udev;
609 struct usb_host_endpoint *endpoint = intf->cur_altsetting->endpoint;
610 unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints;
611
612 devinfo->uas_sense_old = 0;
613 devinfo->cmnd = NULL;
614
615 for (i = 0; i < n_endpoints; i++) {
616 unsigned char *extra = endpoint[i].extra;
617 int len = endpoint[i].extralen;
618 while (len > 1) {
619 if (extra[1] == USB_DT_PIPE_USAGE) {
620 unsigned pipe_id = extra[2];
621 if (pipe_id > 0 && pipe_id < 5)
622 eps[pipe_id - 1] = &endpoint[i];
623 break;
624 }
625 len -= extra[0];
626 extra += extra[0];
627 }
628 }
629
630 /*
631 * Assume that if we didn't find a control pipe descriptor, we're
632 * using a device with old firmware that happens to be set up like
633 * this.
634 */
635 if (!eps[0]) {
636 devinfo->cmd_pipe = usb_sndbulkpipe(udev, 1);
637 devinfo->status_pipe = usb_rcvbulkpipe(udev, 1);
638 devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 2);
639 devinfo->data_out_pipe = usb_sndbulkpipe(udev, 2);
640
641 eps[1] = usb_pipe_endpoint(udev, devinfo->status_pipe);
642 eps[2] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
643 eps[3] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
644 } else {
645 devinfo->cmd_pipe = usb_sndbulkpipe(udev,
646 eps[0]->desc.bEndpointAddress);
647 devinfo->status_pipe = usb_rcvbulkpipe(udev,
648 eps[1]->desc.bEndpointAddress);
649 devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
650 eps[2]->desc.bEndpointAddress);
651 devinfo->data_out_pipe = usb_sndbulkpipe(udev,
652 eps[3]->desc.bEndpointAddress);
653 }
654
655 devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 3, 256,
656 GFP_KERNEL);
657 if (devinfo->qdepth < 0) {
658 devinfo->qdepth = 256;
659 devinfo->use_streams = 0;
660 } else {
661 devinfo->use_streams = 1;
662 }
663}
664
665static int uas_alloc_status_urb(struct uas_dev_info *devinfo,
666 struct Scsi_Host *shost)
667{
668 if (devinfo->use_streams) {
669 devinfo->status_urb = NULL;
670 return 0;
671 }
672
673 devinfo->status_urb = uas_alloc_sense_urb(devinfo, GFP_KERNEL,
674 shost, 0);
675 if (!devinfo->status_urb)
676 goto err_s_urb;
677
678 if (usb_submit_urb(devinfo->status_urb, GFP_KERNEL))
679 goto err_submit_urb;
680
681 return 0;
682err_submit_urb:
683 usb_free_urb(devinfo->status_urb);
684err_s_urb:
685 return -ENOMEM;
686}
687
688static void uas_free_streams(struct uas_dev_info *devinfo)
689{
690 struct usb_device *udev = devinfo->udev;
691 struct usb_host_endpoint *eps[3];
692
693 eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
694 eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
695 eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
696 usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL);
697}
698
699/*
700 * XXX: What I'd like to do here is register a SCSI host for each USB host in
701 * the system. Follow usb-storage's design of registering a SCSI host for
702 * each USB device for the moment. Can implement this by walking up the
703 * USB hierarchy until we find a USB host.
704 */
705static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
706{
707 int result;
708 struct Scsi_Host *shost;
709 struct uas_dev_info *devinfo;
710 struct usb_device *udev = interface_to_usbdev(intf);
711
712 if (uas_switch_interface(udev, intf))
713 return -ENODEV;
714
715 devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL);
716 if (!devinfo)
717 return -ENOMEM;
718
719 result = -ENOMEM;
720 shost = scsi_host_alloc(&uas_host_template, sizeof(void *));
721 if (!shost)
722 goto free;
723
724 shost->max_cmd_len = 16 + 252;
725 shost->max_id = 1;
726 shost->sg_tablesize = udev->bus->sg_tablesize;
727
728 devinfo->intf = intf;
729 devinfo->udev = udev;
730 uas_configure_endpoints(devinfo);
731
732 result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2);
733 if (result)
734 goto free;
735
736 result = scsi_add_host(shost, &intf->dev);
737 if (result)
738 goto deconfig_eps;
739
740 shost->hostdata[0] = (unsigned long)devinfo;
741
742 result = uas_alloc_status_urb(devinfo, shost);
743 if (result)
744 goto err_alloc_status;
745
746 scsi_scan_host(shost);
747 usb_set_intfdata(intf, shost);
748 return result;
749
750err_alloc_status:
751 scsi_remove_host(shost);
752 shost = NULL;
753deconfig_eps:
754 uas_free_streams(devinfo);
755 free:
756 kfree(devinfo);
757 if (shost)
758 scsi_host_put(shost);
759 return result;
760}
761
762static int uas_pre_reset(struct usb_interface *intf)
763{
764/* XXX: Need to return 1 if it's not our device in error handling */
765 return 0;
766}
767
768static int uas_post_reset(struct usb_interface *intf)
769{
770/* XXX: Need to return 1 if it's not our device in error handling */
771 return 0;
772}
773
774static void uas_disconnect(struct usb_interface *intf)
775{
776 struct Scsi_Host *shost = usb_get_intfdata(intf);
777 struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
778
779 scsi_remove_host(shost);
780 usb_kill_urb(devinfo->status_urb);
781 usb_free_urb(devinfo->status_urb);
782 uas_free_streams(devinfo);
783 kfree(devinfo);
784}
785
786/*
787 * XXX: Should this plug into libusual so we can auto-upgrade devices from
788 * Bulk-Only to UAS?
789 */
790static struct usb_driver uas_driver = {
791 .name = "uas",
792 .probe = uas_probe,
793 .disconnect = uas_disconnect,
794 .pre_reset = uas_pre_reset,
795 .post_reset = uas_post_reset,
796 .id_table = uas_usb_ids,
797};
798
799module_usb_driver(uas_driver);
800
801MODULE_LICENSE("GPL");
802MODULE_AUTHOR("Matthew Wilcox and Sarah Sharp");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * USB Attached SCSI
4 * Note that this is not the same as the USB Mass Storage driver
5 *
6 * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
7 * Copyright Matthew Wilcox for Intel Corp, 2010
8 * Copyright Sarah Sharp for Intel Corp, 2010
9 */
10
11#include <linux/blkdev.h>
12#include <linux/slab.h>
13#include <linux/types.h>
14#include <linux/module.h>
15#include <linux/usb.h>
16#include <linux/usb_usual.h>
17#include <linux/usb/hcd.h>
18#include <linux/usb/storage.h>
19#include <linux/usb/uas.h>
20
21#include <scsi/scsi.h>
22#include <scsi/scsi_eh.h>
23#include <scsi/scsi_dbg.h>
24#include <scsi/scsi_cmnd.h>
25#include <scsi/scsi_device.h>
26#include <scsi/scsi_host.h>
27#include <scsi/scsi_tcq.h>
28
29#include "uas-detect.h"
30#include "scsiglue.h"
31
32#define MAX_CMNDS 256
33
34struct uas_dev_info {
35 struct usb_interface *intf;
36 struct usb_device *udev;
37 struct usb_anchor cmd_urbs;
38 struct usb_anchor sense_urbs;
39 struct usb_anchor data_urbs;
40 unsigned long flags;
41 int qdepth, resetting;
42 unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
43 unsigned use_streams:1;
44 unsigned shutdown:1;
45 struct scsi_cmnd *cmnd[MAX_CMNDS];
46 spinlock_t lock;
47 struct work_struct work;
48};
49
50enum {
51 SUBMIT_STATUS_URB = BIT(1),
52 ALLOC_DATA_IN_URB = BIT(2),
53 SUBMIT_DATA_IN_URB = BIT(3),
54 ALLOC_DATA_OUT_URB = BIT(4),
55 SUBMIT_DATA_OUT_URB = BIT(5),
56 ALLOC_CMD_URB = BIT(6),
57 SUBMIT_CMD_URB = BIT(7),
58 COMMAND_INFLIGHT = BIT(8),
59 DATA_IN_URB_INFLIGHT = BIT(9),
60 DATA_OUT_URB_INFLIGHT = BIT(10),
61 COMMAND_ABORTED = BIT(11),
62 IS_IN_WORK_LIST = BIT(12),
63};
64
65/* Overrides scsi_pointer */
66struct uas_cmd_info {
67 unsigned int state;
68 unsigned int uas_tag;
69 struct urb *cmd_urb;
70 struct urb *data_in_urb;
71 struct urb *data_out_urb;
72};
73
74/* I hate forward declarations, but I actually have a loop */
75static int uas_submit_urbs(struct scsi_cmnd *cmnd,
76 struct uas_dev_info *devinfo);
77static void uas_do_work(struct work_struct *work);
78static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
79static void uas_free_streams(struct uas_dev_info *devinfo);
80static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
81 int status);
82
83static void uas_do_work(struct work_struct *work)
84{
85 struct uas_dev_info *devinfo =
86 container_of(work, struct uas_dev_info, work);
87 struct uas_cmd_info *cmdinfo;
88 struct scsi_cmnd *cmnd;
89 unsigned long flags;
90 int i, err;
91
92 spin_lock_irqsave(&devinfo->lock, flags);
93
94 if (devinfo->resetting)
95 goto out;
96
97 for (i = 0; i < devinfo->qdepth; i++) {
98 if (!devinfo->cmnd[i])
99 continue;
100
101 cmnd = devinfo->cmnd[i];
102 cmdinfo = (void *)&cmnd->SCp;
103
104 if (!(cmdinfo->state & IS_IN_WORK_LIST))
105 continue;
106
107 err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
108 if (!err)
109 cmdinfo->state &= ~IS_IN_WORK_LIST;
110 else
111 schedule_work(&devinfo->work);
112 }
113out:
114 spin_unlock_irqrestore(&devinfo->lock, flags);
115}
116
117static void uas_add_work(struct uas_cmd_info *cmdinfo)
118{
119 struct scsi_pointer *scp = (void *)cmdinfo;
120 struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
121 struct uas_dev_info *devinfo = cmnd->device->hostdata;
122
123 lockdep_assert_held(&devinfo->lock);
124 cmdinfo->state |= IS_IN_WORK_LIST;
125 schedule_work(&devinfo->work);
126}
127
128static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
129{
130 struct uas_cmd_info *cmdinfo;
131 struct scsi_cmnd *cmnd;
132 unsigned long flags;
133 int i, err;
134
135 spin_lock_irqsave(&devinfo->lock, flags);
136 for (i = 0; i < devinfo->qdepth; i++) {
137 if (!devinfo->cmnd[i])
138 continue;
139
140 cmnd = devinfo->cmnd[i];
141 cmdinfo = (void *)&cmnd->SCp;
142 uas_log_cmd_state(cmnd, __func__, 0);
143 /* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
144 cmdinfo->state &= ~COMMAND_INFLIGHT;
145 cmnd->result = result << 16;
146 err = uas_try_complete(cmnd, __func__);
147 WARN_ON(err != 0);
148 }
149 spin_unlock_irqrestore(&devinfo->lock, flags);
150}
151
152static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
153{
154 struct sense_iu *sense_iu = urb->transfer_buffer;
155 struct scsi_device *sdev = cmnd->device;
156
157 if (urb->actual_length > 16) {
158 unsigned len = be16_to_cpup(&sense_iu->len);
159 if (len + 16 != urb->actual_length) {
160 int newlen = min(len + 16, urb->actual_length) - 16;
161 if (newlen < 0)
162 newlen = 0;
163 sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
164 "disagrees with IU sense data length %d, "
165 "using %d bytes of sense data\n", __func__,
166 urb->actual_length, len, newlen);
167 len = newlen;
168 }
169 memcpy(cmnd->sense_buffer, sense_iu->sense, len);
170 }
171
172 cmnd->result = sense_iu->status;
173}
174
175static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
176 int status)
177{
178 struct uas_cmd_info *ci = (void *)&cmnd->SCp;
179 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
180
181 scmd_printk(KERN_INFO, cmnd,
182 "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
183 prefix, status, cmdinfo->uas_tag,
184 (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "",
185 (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "",
186 (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "",
187 (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "",
188 (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "",
189 (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "",
190 (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "",
191 (ci->state & COMMAND_INFLIGHT) ? " CMD" : "",
192 (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "",
193 (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "",
194 (ci->state & COMMAND_ABORTED) ? " abort" : "",
195 (ci->state & IS_IN_WORK_LIST) ? " work" : "");
196 scsi_print_command(cmnd);
197}
198
199static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
200{
201 struct uas_cmd_info *cmdinfo;
202
203 if (!cmnd)
204 return;
205
206 cmdinfo = (void *)&cmnd->SCp;
207
208 if (cmdinfo->state & SUBMIT_CMD_URB)
209 usb_free_urb(cmdinfo->cmd_urb);
210
211 /* data urbs may have never gotten their submit flag set */
212 if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
213 usb_free_urb(cmdinfo->data_in_urb);
214 if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
215 usb_free_urb(cmdinfo->data_out_urb);
216}
217
218static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
219{
220 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
221 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
222
223 lockdep_assert_held(&devinfo->lock);
224 if (cmdinfo->state & (COMMAND_INFLIGHT |
225 DATA_IN_URB_INFLIGHT |
226 DATA_OUT_URB_INFLIGHT |
227 COMMAND_ABORTED))
228 return -EBUSY;
229 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
230 uas_free_unsubmitted_urbs(cmnd);
231 cmnd->scsi_done(cmnd);
232 return 0;
233}
234
235static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
236 unsigned direction)
237{
238 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
239 int err;
240
241 cmdinfo->state |= direction | SUBMIT_STATUS_URB;
242 err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
243 if (err) {
244 uas_add_work(cmdinfo);
245 }
246}
247
248static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd)
249{
250 u8 response_code = riu->response_code;
251
252 switch (response_code) {
253 case RC_INCORRECT_LUN:
254 cmnd->result = DID_BAD_TARGET << 16;
255 break;
256 case RC_TMF_SUCCEEDED:
257 cmnd->result = DID_OK << 16;
258 break;
259 case RC_TMF_NOT_SUPPORTED:
260 cmnd->result = DID_TARGET_FAILURE << 16;
261 break;
262 default:
263 uas_log_cmd_state(cmnd, "response iu", response_code);
264 cmnd->result = DID_ERROR << 16;
265 break;
266 }
267
268 return response_code == RC_TMF_SUCCEEDED;
269}
270
271static void uas_stat_cmplt(struct urb *urb)
272{
273 struct iu *iu = urb->transfer_buffer;
274 struct Scsi_Host *shost = urb->context;
275 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
276 struct urb *data_in_urb = NULL;
277 struct urb *data_out_urb = NULL;
278 struct scsi_cmnd *cmnd;
279 struct uas_cmd_info *cmdinfo;
280 unsigned long flags;
281 unsigned int idx;
282 int status = urb->status;
283 bool success;
284
285 spin_lock_irqsave(&devinfo->lock, flags);
286
287 if (devinfo->resetting)
288 goto out;
289
290 if (status) {
291 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
292 dev_err(&urb->dev->dev, "stat urb: status %d\n", status);
293 goto out;
294 }
295
296 idx = be16_to_cpup(&iu->tag) - 1;
297 if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
298 dev_err(&urb->dev->dev,
299 "stat urb: no pending cmd for uas-tag %d\n", idx + 1);
300 goto out;
301 }
302
303 cmnd = devinfo->cmnd[idx];
304 cmdinfo = (void *)&cmnd->SCp;
305
306 if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
307 uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
308 goto out;
309 }
310
311 switch (iu->iu_id) {
312 case IU_ID_STATUS:
313 uas_sense(urb, cmnd);
314 if (cmnd->result != 0) {
315 /* cancel data transfers on error */
316 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
317 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
318 }
319 cmdinfo->state &= ~COMMAND_INFLIGHT;
320 uas_try_complete(cmnd, __func__);
321 break;
322 case IU_ID_READ_READY:
323 if (!cmdinfo->data_in_urb ||
324 (cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
325 uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
326 break;
327 }
328 uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
329 break;
330 case IU_ID_WRITE_READY:
331 if (!cmdinfo->data_out_urb ||
332 (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
333 uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
334 break;
335 }
336 uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
337 break;
338 case IU_ID_RESPONSE:
339 cmdinfo->state &= ~COMMAND_INFLIGHT;
340 success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd);
341 if (!success) {
342 /* Error, cancel data transfers */
343 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
344 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
345 }
346 uas_try_complete(cmnd, __func__);
347 break;
348 default:
349 uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
350 }
351out:
352 usb_free_urb(urb);
353 spin_unlock_irqrestore(&devinfo->lock, flags);
354
355 /* Unlinking of data urbs must be done without holding the lock */
356 if (data_in_urb) {
357 usb_unlink_urb(data_in_urb);
358 usb_put_urb(data_in_urb);
359 }
360 if (data_out_urb) {
361 usb_unlink_urb(data_out_urb);
362 usb_put_urb(data_out_urb);
363 }
364}
365
366static void uas_data_cmplt(struct urb *urb)
367{
368 struct scsi_cmnd *cmnd = urb->context;
369 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
370 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
371 struct scsi_data_buffer *sdb = &cmnd->sdb;
372 unsigned long flags;
373 int status = urb->status;
374
375 spin_lock_irqsave(&devinfo->lock, flags);
376
377 if (cmdinfo->data_in_urb == urb) {
378 cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
379 cmdinfo->data_in_urb = NULL;
380 } else if (cmdinfo->data_out_urb == urb) {
381 cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
382 cmdinfo->data_out_urb = NULL;
383 }
384
385 if (devinfo->resetting)
386 goto out;
387
388 /* Data urbs should not complete before the cmd urb is submitted */
389 if (cmdinfo->state & SUBMIT_CMD_URB) {
390 uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
391 goto out;
392 }
393
394 if (status) {
395 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
396 uas_log_cmd_state(cmnd, "data cmplt err", status);
397 /* error: no data transfered */
398 scsi_set_resid(cmnd, sdb->length);
399 } else {
400 scsi_set_resid(cmnd, sdb->length - urb->actual_length);
401 }
402 uas_try_complete(cmnd, __func__);
403out:
404 usb_free_urb(urb);
405 spin_unlock_irqrestore(&devinfo->lock, flags);
406}
407
408static void uas_cmd_cmplt(struct urb *urb)
409{
410 if (urb->status)
411 dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
412
413 usb_free_urb(urb);
414}
415
416static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
417 struct scsi_cmnd *cmnd,
418 enum dma_data_direction dir)
419{
420 struct usb_device *udev = devinfo->udev;
421 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
422 struct urb *urb = usb_alloc_urb(0, gfp);
423 struct scsi_data_buffer *sdb = &cmnd->sdb;
424 unsigned int pipe = (dir == DMA_FROM_DEVICE)
425 ? devinfo->data_in_pipe : devinfo->data_out_pipe;
426
427 if (!urb)
428 goto out;
429 usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
430 uas_data_cmplt, cmnd);
431 if (devinfo->use_streams)
432 urb->stream_id = cmdinfo->uas_tag;
433 urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
434 urb->sg = sdb->table.sgl;
435 out:
436 return urb;
437}
438
439static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
440 struct scsi_cmnd *cmnd)
441{
442 struct usb_device *udev = devinfo->udev;
443 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
444 struct urb *urb = usb_alloc_urb(0, gfp);
445 struct sense_iu *iu;
446
447 if (!urb)
448 goto out;
449
450 iu = kzalloc(sizeof(*iu), gfp);
451 if (!iu)
452 goto free;
453
454 usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
455 uas_stat_cmplt, cmnd->device->host);
456 if (devinfo->use_streams)
457 urb->stream_id = cmdinfo->uas_tag;
458 urb->transfer_flags |= URB_FREE_BUFFER;
459 out:
460 return urb;
461 free:
462 usb_free_urb(urb);
463 return NULL;
464}
465
466static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
467 struct scsi_cmnd *cmnd)
468{
469 struct usb_device *udev = devinfo->udev;
470 struct scsi_device *sdev = cmnd->device;
471 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
472 struct urb *urb = usb_alloc_urb(0, gfp);
473 struct command_iu *iu;
474 int len;
475
476 if (!urb)
477 goto out;
478
479 len = cmnd->cmd_len - 16;
480 if (len < 0)
481 len = 0;
482 len = ALIGN(len, 4);
483 iu = kzalloc(sizeof(*iu) + len, gfp);
484 if (!iu)
485 goto free;
486
487 iu->iu_id = IU_ID_COMMAND;
488 iu->tag = cpu_to_be16(cmdinfo->uas_tag);
489 iu->prio_attr = UAS_SIMPLE_TAG;
490 iu->len = len;
491 int_to_scsilun(sdev->lun, &iu->lun);
492 memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
493
494 usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
495 uas_cmd_cmplt, NULL);
496 urb->transfer_flags |= URB_FREE_BUFFER;
497 out:
498 return urb;
499 free:
500 usb_free_urb(urb);
501 return NULL;
502}
503
504/*
505 * Why should I request the Status IU before sending the Command IU? Spec
506 * says to, but also says the device may receive them in any order. Seems
507 * daft to me.
508 */
509
510static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
511{
512 struct uas_dev_info *devinfo = cmnd->device->hostdata;
513 struct urb *urb;
514 int err;
515
516 urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
517 if (!urb)
518 return NULL;
519 usb_anchor_urb(urb, &devinfo->sense_urbs);
520 err = usb_submit_urb(urb, gfp);
521 if (err) {
522 usb_unanchor_urb(urb);
523 uas_log_cmd_state(cmnd, "sense submit err", err);
524 usb_free_urb(urb);
525 return NULL;
526 }
527 return urb;
528}
529
530static int uas_submit_urbs(struct scsi_cmnd *cmnd,
531 struct uas_dev_info *devinfo)
532{
533 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
534 struct urb *urb;
535 int err;
536
537 lockdep_assert_held(&devinfo->lock);
538 if (cmdinfo->state & SUBMIT_STATUS_URB) {
539 urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
540 if (!urb)
541 return SCSI_MLQUEUE_DEVICE_BUSY;
542 cmdinfo->state &= ~SUBMIT_STATUS_URB;
543 }
544
545 if (cmdinfo->state & ALLOC_DATA_IN_URB) {
546 cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
547 cmnd, DMA_FROM_DEVICE);
548 if (!cmdinfo->data_in_urb)
549 return SCSI_MLQUEUE_DEVICE_BUSY;
550 cmdinfo->state &= ~ALLOC_DATA_IN_URB;
551 }
552
553 if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
554 usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
555 err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
556 if (err) {
557 usb_unanchor_urb(cmdinfo->data_in_urb);
558 uas_log_cmd_state(cmnd, "data in submit err", err);
559 return SCSI_MLQUEUE_DEVICE_BUSY;
560 }
561 cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
562 cmdinfo->state |= DATA_IN_URB_INFLIGHT;
563 }
564
565 if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
566 cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
567 cmnd, DMA_TO_DEVICE);
568 if (!cmdinfo->data_out_urb)
569 return SCSI_MLQUEUE_DEVICE_BUSY;
570 cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
571 }
572
573 if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
574 usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
575 err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
576 if (err) {
577 usb_unanchor_urb(cmdinfo->data_out_urb);
578 uas_log_cmd_state(cmnd, "data out submit err", err);
579 return SCSI_MLQUEUE_DEVICE_BUSY;
580 }
581 cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
582 cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
583 }
584
585 if (cmdinfo->state & ALLOC_CMD_URB) {
586 cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
587 if (!cmdinfo->cmd_urb)
588 return SCSI_MLQUEUE_DEVICE_BUSY;
589 cmdinfo->state &= ~ALLOC_CMD_URB;
590 }
591
592 if (cmdinfo->state & SUBMIT_CMD_URB) {
593 usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
594 err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
595 if (err) {
596 usb_unanchor_urb(cmdinfo->cmd_urb);
597 uas_log_cmd_state(cmnd, "cmd submit err", err);
598 return SCSI_MLQUEUE_DEVICE_BUSY;
599 }
600 cmdinfo->cmd_urb = NULL;
601 cmdinfo->state &= ~SUBMIT_CMD_URB;
602 cmdinfo->state |= COMMAND_INFLIGHT;
603 }
604
605 return 0;
606}
607
608static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
609 void (*done)(struct scsi_cmnd *))
610{
611 struct scsi_device *sdev = cmnd->device;
612 struct uas_dev_info *devinfo = sdev->hostdata;
613 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
614 unsigned long flags;
615 int idx, err;
616
617 BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
618
619 /* Re-check scsi_block_requests now that we've the host-lock */
620 if (cmnd->device->host->host_self_blocked)
621 return SCSI_MLQUEUE_DEVICE_BUSY;
622
623 if ((devinfo->flags & US_FL_NO_ATA_1X) &&
624 (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
625 memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
626 sizeof(usb_stor_sense_invalidCDB));
627 cmnd->result = SAM_STAT_CHECK_CONDITION;
628 cmnd->scsi_done(cmnd);
629 return 0;
630 }
631
632 spin_lock_irqsave(&devinfo->lock, flags);
633
634 if (devinfo->resetting) {
635 cmnd->result = DID_ERROR << 16;
636 cmnd->scsi_done(cmnd);
637 spin_unlock_irqrestore(&devinfo->lock, flags);
638 return 0;
639 }
640
641 /* Find a free uas-tag */
642 for (idx = 0; idx < devinfo->qdepth; idx++) {
643 if (!devinfo->cmnd[idx])
644 break;
645 }
646 if (idx == devinfo->qdepth) {
647 spin_unlock_irqrestore(&devinfo->lock, flags);
648 return SCSI_MLQUEUE_DEVICE_BUSY;
649 }
650
651 cmnd->scsi_done = done;
652
653 memset(cmdinfo, 0, sizeof(*cmdinfo));
654 cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
655 cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
656
657 switch (cmnd->sc_data_direction) {
658 case DMA_FROM_DEVICE:
659 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
660 break;
661 case DMA_BIDIRECTIONAL:
662 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
663 /* fall through */
664 case DMA_TO_DEVICE:
665 cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
666 case DMA_NONE:
667 break;
668 }
669
670 if (!devinfo->use_streams)
671 cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
672
673 err = uas_submit_urbs(cmnd, devinfo);
674 if (err) {
675 /* If we did nothing, give up now */
676 if (cmdinfo->state & SUBMIT_STATUS_URB) {
677 spin_unlock_irqrestore(&devinfo->lock, flags);
678 return SCSI_MLQUEUE_DEVICE_BUSY;
679 }
680 uas_add_work(cmdinfo);
681 }
682
683 devinfo->cmnd[idx] = cmnd;
684 spin_unlock_irqrestore(&devinfo->lock, flags);
685 return 0;
686}
687
688static DEF_SCSI_QCMD(uas_queuecommand)
689
690/*
691 * For now we do not support actually sending an abort to the device, so
692 * this eh always fails. Still we must define it to make sure that we've
693 * dropped all references to the cmnd in question once this function exits.
694 */
695static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
696{
697 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
698 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
699 struct urb *data_in_urb = NULL;
700 struct urb *data_out_urb = NULL;
701 unsigned long flags;
702
703 spin_lock_irqsave(&devinfo->lock, flags);
704
705 uas_log_cmd_state(cmnd, __func__, 0);
706
707 /* Ensure that try_complete does not call scsi_done */
708 cmdinfo->state |= COMMAND_ABORTED;
709
710 /* Drop all refs to this cmnd, kill data urbs to break their ref */
711 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
712 if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
713 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
714 if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
715 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
716
717 uas_free_unsubmitted_urbs(cmnd);
718
719 spin_unlock_irqrestore(&devinfo->lock, flags);
720
721 if (data_in_urb) {
722 usb_kill_urb(data_in_urb);
723 usb_put_urb(data_in_urb);
724 }
725 if (data_out_urb) {
726 usb_kill_urb(data_out_urb);
727 usb_put_urb(data_out_urb);
728 }
729
730 return FAILED;
731}
732
733static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
734{
735 struct scsi_device *sdev = cmnd->device;
736 struct uas_dev_info *devinfo = sdev->hostdata;
737 struct usb_device *udev = devinfo->udev;
738 unsigned long flags;
739 int err;
740
741 err = usb_lock_device_for_reset(udev, devinfo->intf);
742 if (err) {
743 shost_printk(KERN_ERR, sdev->host,
744 "%s FAILED to get lock err %d\n", __func__, err);
745 return FAILED;
746 }
747
748 shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
749
750 spin_lock_irqsave(&devinfo->lock, flags);
751 devinfo->resetting = 1;
752 spin_unlock_irqrestore(&devinfo->lock, flags);
753
754 usb_kill_anchored_urbs(&devinfo->cmd_urbs);
755 usb_kill_anchored_urbs(&devinfo->sense_urbs);
756 usb_kill_anchored_urbs(&devinfo->data_urbs);
757 uas_zap_pending(devinfo, DID_RESET);
758
759 err = usb_reset_device(udev);
760
761 spin_lock_irqsave(&devinfo->lock, flags);
762 devinfo->resetting = 0;
763 spin_unlock_irqrestore(&devinfo->lock, flags);
764
765 usb_unlock_device(udev);
766
767 if (err) {
768 shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
769 __func__, err);
770 return FAILED;
771 }
772
773 shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
774 return SUCCESS;
775}
776
777static int uas_target_alloc(struct scsi_target *starget)
778{
779 struct uas_dev_info *devinfo = (struct uas_dev_info *)
780 dev_to_shost(starget->dev.parent)->hostdata;
781
782 if (devinfo->flags & US_FL_NO_REPORT_LUNS)
783 starget->no_report_luns = 1;
784
785 return 0;
786}
787
788static int uas_slave_alloc(struct scsi_device *sdev)
789{
790 struct uas_dev_info *devinfo =
791 (struct uas_dev_info *)sdev->host->hostdata;
792
793 sdev->hostdata = devinfo;
794
795 /*
796 * The protocol has no requirements on alignment in the strict sense.
797 * Controllers may or may not have alignment restrictions.
798 * As this is not exported, we use an extremely conservative guess.
799 */
800 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
801
802 if (devinfo->flags & US_FL_MAX_SECTORS_64)
803 blk_queue_max_hw_sectors(sdev->request_queue, 64);
804 else if (devinfo->flags & US_FL_MAX_SECTORS_240)
805 blk_queue_max_hw_sectors(sdev->request_queue, 240);
806
807 return 0;
808}
809
810static int uas_slave_configure(struct scsi_device *sdev)
811{
812 struct uas_dev_info *devinfo = sdev->hostdata;
813
814 if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
815 sdev->no_report_opcodes = 1;
816
817 /* A few buggy USB-ATA bridges don't understand FUA */
818 if (devinfo->flags & US_FL_BROKEN_FUA)
819 sdev->broken_fua = 1;
820
821 /* UAS also needs to support FL_ALWAYS_SYNC */
822 if (devinfo->flags & US_FL_ALWAYS_SYNC) {
823 sdev->skip_ms_page_3f = 1;
824 sdev->skip_ms_page_8 = 1;
825 sdev->wce_default_on = 1;
826 }
827
828 /*
829 * Some disks return the total number of blocks in response
830 * to READ CAPACITY rather than the highest block number.
831 * If this device makes that mistake, tell the sd driver.
832 */
833 if (devinfo->flags & US_FL_FIX_CAPACITY)
834 sdev->fix_capacity = 1;
835
836 /*
837 * Some devices don't like MODE SENSE with page=0x3f,
838 * which is the command used for checking if a device
839 * is write-protected. Now that we tell the sd driver
840 * to do a 192-byte transfer with this command the
841 * majority of devices work fine, but a few still can't
842 * handle it. The sd driver will simply assume those
843 * devices are write-enabled.
844 */
845 if (devinfo->flags & US_FL_NO_WP_DETECT)
846 sdev->skip_ms_page_3f = 1;
847
848 scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
849 return 0;
850}
851
852static struct scsi_host_template uas_host_template = {
853 .module = THIS_MODULE,
854 .name = "uas",
855 .queuecommand = uas_queuecommand,
856 .target_alloc = uas_target_alloc,
857 .slave_alloc = uas_slave_alloc,
858 .slave_configure = uas_slave_configure,
859 .eh_abort_handler = uas_eh_abort_handler,
860 .eh_device_reset_handler = uas_eh_device_reset_handler,
861 .this_id = -1,
862 .sg_tablesize = SG_NONE,
863 .skip_settle_delay = 1,
864 .dma_boundary = PAGE_SIZE - 1,
865};
866
867#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
868 vendorName, productName, useProtocol, useTransport, \
869 initFunction, flags) \
870{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
871 .driver_info = (flags) }
872
873static struct usb_device_id uas_usb_ids[] = {
874# include "unusual_uas.h"
875 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
876 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
877 { }
878};
879MODULE_DEVICE_TABLE(usb, uas_usb_ids);
880
881#undef UNUSUAL_DEV
882
883static int uas_switch_interface(struct usb_device *udev,
884 struct usb_interface *intf)
885{
886 struct usb_host_interface *alt;
887
888 alt = uas_find_uas_alt_setting(intf);
889 if (!alt)
890 return -ENODEV;
891
892 return usb_set_interface(udev, alt->desc.bInterfaceNumber,
893 alt->desc.bAlternateSetting);
894}
895
896static int uas_configure_endpoints(struct uas_dev_info *devinfo)
897{
898 struct usb_host_endpoint *eps[4] = { };
899 struct usb_device *udev = devinfo->udev;
900 int r;
901
902 r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
903 if (r)
904 return r;
905
906 devinfo->cmd_pipe = usb_sndbulkpipe(udev,
907 usb_endpoint_num(&eps[0]->desc));
908 devinfo->status_pipe = usb_rcvbulkpipe(udev,
909 usb_endpoint_num(&eps[1]->desc));
910 devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
911 usb_endpoint_num(&eps[2]->desc));
912 devinfo->data_out_pipe = usb_sndbulkpipe(udev,
913 usb_endpoint_num(&eps[3]->desc));
914
915 if (udev->speed < USB_SPEED_SUPER) {
916 devinfo->qdepth = 32;
917 devinfo->use_streams = 0;
918 } else {
919 devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
920 3, MAX_CMNDS, GFP_NOIO);
921 if (devinfo->qdepth < 0)
922 return devinfo->qdepth;
923 devinfo->use_streams = 1;
924 }
925
926 return 0;
927}
928
929static void uas_free_streams(struct uas_dev_info *devinfo)
930{
931 struct usb_device *udev = devinfo->udev;
932 struct usb_host_endpoint *eps[3];
933
934 eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
935 eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
936 eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
937 usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
938}
939
940static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
941{
942 int result = -ENOMEM;
943 struct Scsi_Host *shost = NULL;
944 struct uas_dev_info *devinfo;
945 struct usb_device *udev = interface_to_usbdev(intf);
946 unsigned long dev_flags;
947
948 if (!uas_use_uas_driver(intf, id, &dev_flags))
949 return -ENODEV;
950
951 if (uas_switch_interface(udev, intf))
952 return -ENODEV;
953
954 shost = scsi_host_alloc(&uas_host_template,
955 sizeof(struct uas_dev_info));
956 if (!shost)
957 goto set_alt0;
958
959 shost->max_cmd_len = 16 + 252;
960 shost->max_id = 1;
961 shost->max_lun = 256;
962 shost->max_channel = 0;
963 shost->sg_tablesize = udev->bus->sg_tablesize;
964
965 devinfo = (struct uas_dev_info *)shost->hostdata;
966 devinfo->intf = intf;
967 devinfo->udev = udev;
968 devinfo->resetting = 0;
969 devinfo->shutdown = 0;
970 devinfo->flags = dev_flags;
971 init_usb_anchor(&devinfo->cmd_urbs);
972 init_usb_anchor(&devinfo->sense_urbs);
973 init_usb_anchor(&devinfo->data_urbs);
974 spin_lock_init(&devinfo->lock);
975 INIT_WORK(&devinfo->work, uas_do_work);
976
977 result = uas_configure_endpoints(devinfo);
978 if (result)
979 goto set_alt0;
980
981 /*
982 * 1 tag is reserved for untagged commands +
983 * 1 tag to avoid off by one errors in some bridge firmwares
984 */
985 shost->can_queue = devinfo->qdepth - 2;
986
987 usb_set_intfdata(intf, shost);
988 result = scsi_add_host(shost, &intf->dev);
989 if (result)
990 goto free_streams;
991
992 scsi_scan_host(shost);
993 return result;
994
995free_streams:
996 uas_free_streams(devinfo);
997 usb_set_intfdata(intf, NULL);
998set_alt0:
999 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1000 if (shost)
1001 scsi_host_put(shost);
1002 return result;
1003}
1004
1005static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
1006{
1007 unsigned long flags;
1008 int i, r = 1;
1009
1010 spin_lock_irqsave(&devinfo->lock, flags);
1011
1012 for (i = 0; i < devinfo->qdepth; i++) {
1013 if (devinfo->cmnd[i]) {
1014 r = 0; /* Not empty */
1015 break;
1016 }
1017 }
1018
1019 spin_unlock_irqrestore(&devinfo->lock, flags);
1020
1021 return r;
1022}
1023
1024/*
1025 * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
1026 * get empty while there still is more work to do due to sense-urbs completing
1027 * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
1028 */
1029static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
1030{
1031 unsigned long start_time;
1032 int r;
1033
1034 start_time = jiffies;
1035 do {
1036 flush_work(&devinfo->work);
1037
1038 r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
1039 if (r == 0)
1040 return -ETIME;
1041
1042 r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
1043 if (r == 0)
1044 return -ETIME;
1045
1046 if (time_after(jiffies, start_time + 5 * HZ))
1047 return -ETIME;
1048 } while (!uas_cmnd_list_empty(devinfo));
1049
1050 return 0;
1051}
1052
1053static int uas_pre_reset(struct usb_interface *intf)
1054{
1055 struct Scsi_Host *shost = usb_get_intfdata(intf);
1056 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1057 unsigned long flags;
1058
1059 if (devinfo->shutdown)
1060 return 0;
1061
1062 /* Block new requests */
1063 spin_lock_irqsave(shost->host_lock, flags);
1064 scsi_block_requests(shost);
1065 spin_unlock_irqrestore(shost->host_lock, flags);
1066
1067 if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1068 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1069 scsi_unblock_requests(shost);
1070 return 1;
1071 }
1072
1073 uas_free_streams(devinfo);
1074
1075 return 0;
1076}
1077
1078static int uas_post_reset(struct usb_interface *intf)
1079{
1080 struct Scsi_Host *shost = usb_get_intfdata(intf);
1081 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1082 unsigned long flags;
1083 int err;
1084
1085 if (devinfo->shutdown)
1086 return 0;
1087
1088 err = uas_configure_endpoints(devinfo);
1089 if (err && err != -ENODEV)
1090 shost_printk(KERN_ERR, shost,
1091 "%s: alloc streams error %d after reset",
1092 __func__, err);
1093
1094 /* we must unblock the host in every case lest we deadlock */
1095 spin_lock_irqsave(shost->host_lock, flags);
1096 scsi_report_bus_reset(shost, 0);
1097 spin_unlock_irqrestore(shost->host_lock, flags);
1098
1099 scsi_unblock_requests(shost);
1100
1101 return err ? 1 : 0;
1102}
1103
1104static int uas_suspend(struct usb_interface *intf, pm_message_t message)
1105{
1106 struct Scsi_Host *shost = usb_get_intfdata(intf);
1107 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1108
1109 if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1110 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1111 return -ETIME;
1112 }
1113
1114 return 0;
1115}
1116
1117static int uas_resume(struct usb_interface *intf)
1118{
1119 return 0;
1120}
1121
1122static int uas_reset_resume(struct usb_interface *intf)
1123{
1124 struct Scsi_Host *shost = usb_get_intfdata(intf);
1125 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1126 unsigned long flags;
1127 int err;
1128
1129 err = uas_configure_endpoints(devinfo);
1130 if (err) {
1131 shost_printk(KERN_ERR, shost,
1132 "%s: alloc streams error %d after reset",
1133 __func__, err);
1134 return -EIO;
1135 }
1136
1137 spin_lock_irqsave(shost->host_lock, flags);
1138 scsi_report_bus_reset(shost, 0);
1139 spin_unlock_irqrestore(shost->host_lock, flags);
1140
1141 return 0;
1142}
1143
1144static void uas_disconnect(struct usb_interface *intf)
1145{
1146 struct Scsi_Host *shost = usb_get_intfdata(intf);
1147 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1148 unsigned long flags;
1149
1150 spin_lock_irqsave(&devinfo->lock, flags);
1151 devinfo->resetting = 1;
1152 spin_unlock_irqrestore(&devinfo->lock, flags);
1153
1154 cancel_work_sync(&devinfo->work);
1155 usb_kill_anchored_urbs(&devinfo->cmd_urbs);
1156 usb_kill_anchored_urbs(&devinfo->sense_urbs);
1157 usb_kill_anchored_urbs(&devinfo->data_urbs);
1158 uas_zap_pending(devinfo, DID_NO_CONNECT);
1159
1160 scsi_remove_host(shost);
1161 uas_free_streams(devinfo);
1162 scsi_host_put(shost);
1163}
1164
1165/*
1166 * Put the device back in usb-storage mode on shutdown, as some BIOS-es
1167 * hang on reboot when the device is still in uas mode. Note the reset is
1168 * necessary as some devices won't revert to usb-storage mode without it.
1169 */
1170static void uas_shutdown(struct device *dev)
1171{
1172 struct usb_interface *intf = to_usb_interface(dev);
1173 struct usb_device *udev = interface_to_usbdev(intf);
1174 struct Scsi_Host *shost = usb_get_intfdata(intf);
1175 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1176
1177 if (system_state != SYSTEM_RESTART)
1178 return;
1179
1180 devinfo->shutdown = 1;
1181 uas_free_streams(devinfo);
1182 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1183 usb_reset_device(udev);
1184}
1185
1186static struct usb_driver uas_driver = {
1187 .name = "uas",
1188 .probe = uas_probe,
1189 .disconnect = uas_disconnect,
1190 .pre_reset = uas_pre_reset,
1191 .post_reset = uas_post_reset,
1192 .suspend = uas_suspend,
1193 .resume = uas_resume,
1194 .reset_resume = uas_reset_resume,
1195 .drvwrap.driver.shutdown = uas_shutdown,
1196 .id_table = uas_usb_ids,
1197};
1198
1199module_usb_driver(uas_driver);
1200
1201MODULE_LICENSE("GPL");
1202MODULE_IMPORT_NS(USB_STORAGE);
1203MODULE_AUTHOR(
1204 "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");