Loading...
1/*
2 * Xilinx gpio driver
3 *
4 * Copyright 2008 Xilinx, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
9 *
10 * You should have received a copy of the GNU General Public License
11 * along with this program; if not, write to the Free Software
12 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
13 */
14
15#include <linux/init.h>
16#include <linux/errno.h>
17#include <linux/module.h>
18#include <linux/of_device.h>
19#include <linux/of_platform.h>
20#include <linux/of_gpio.h>
21#include <linux/io.h>
22#include <linux/gpio.h>
23#include <linux/slab.h>
24
25/* Register Offset Definitions */
26#define XGPIO_DATA_OFFSET (0x0) /* Data register */
27#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
28
29struct xgpio_instance {
30 struct of_mm_gpio_chip mmchip;
31 u32 gpio_state; /* GPIO state shadow register */
32 u32 gpio_dir; /* GPIO direction shadow register */
33 spinlock_t gpio_lock; /* Lock used for synchronization */
34};
35
36/**
37 * xgpio_get - Read the specified signal of the GPIO device.
38 * @gc: Pointer to gpio_chip device structure.
39 * @gpio: GPIO signal number.
40 *
41 * This function reads the specified signal of the GPIO device. It returns 0 if
42 * the signal clear, 1 if signal is set or negative value on error.
43 */
44static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
45{
46 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
47
48 return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1;
49}
50
51/**
52 * xgpio_set - Write the specified signal of the GPIO device.
53 * @gc: Pointer to gpio_chip device structure.
54 * @gpio: GPIO signal number.
55 * @val: Value to be written to specified signal.
56 *
57 * This function writes the specified value in to the specified signal of the
58 * GPIO device.
59 */
60static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
61{
62 unsigned long flags;
63 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
64 struct xgpio_instance *chip =
65 container_of(mm_gc, struct xgpio_instance, mmchip);
66
67 spin_lock_irqsave(&chip->gpio_lock, flags);
68
69 /* Write to GPIO signal and set its direction to output */
70 if (val)
71 chip->gpio_state |= 1 << gpio;
72 else
73 chip->gpio_state &= ~(1 << gpio);
74 out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
75
76 spin_unlock_irqrestore(&chip->gpio_lock, flags);
77}
78
79/**
80 * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
81 * @gc: Pointer to gpio_chip device structure.
82 * @gpio: GPIO signal number.
83 *
84 * This function sets the direction of specified GPIO signal as input.
85 * It returns 0 if direction of GPIO signals is set as input otherwise it
86 * returns negative error value.
87 */
88static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
89{
90 unsigned long flags;
91 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
92 struct xgpio_instance *chip =
93 container_of(mm_gc, struct xgpio_instance, mmchip);
94
95 spin_lock_irqsave(&chip->gpio_lock, flags);
96
97 /* Set the GPIO bit in shadow register and set direction as input */
98 chip->gpio_dir |= (1 << gpio);
99 out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
100
101 spin_unlock_irqrestore(&chip->gpio_lock, flags);
102
103 return 0;
104}
105
106/**
107 * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
108 * @gc: Pointer to gpio_chip device structure.
109 * @gpio: GPIO signal number.
110 * @val: Value to be written to specified signal.
111 *
112 * This function sets the direction of specified GPIO signal as output. If all
113 * GPIO signals of GPIO chip is configured as input then it returns
114 * error otherwise it returns 0.
115 */
116static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
117{
118 unsigned long flags;
119 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
120 struct xgpio_instance *chip =
121 container_of(mm_gc, struct xgpio_instance, mmchip);
122
123 spin_lock_irqsave(&chip->gpio_lock, flags);
124
125 /* Write state of GPIO signal */
126 if (val)
127 chip->gpio_state |= 1 << gpio;
128 else
129 chip->gpio_state &= ~(1 << gpio);
130 out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
131
132 /* Clear the GPIO bit in shadow register and set direction as output */
133 chip->gpio_dir &= (~(1 << gpio));
134 out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
135
136 spin_unlock_irqrestore(&chip->gpio_lock, flags);
137
138 return 0;
139}
140
141/**
142 * xgpio_save_regs - Set initial values of GPIO pins
143 * @mm_gc: pointer to memory mapped GPIO chip structure
144 */
145static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
146{
147 struct xgpio_instance *chip =
148 container_of(mm_gc, struct xgpio_instance, mmchip);
149
150 out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
151 out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
152}
153
154/**
155 * xgpio_of_probe - Probe method for the GPIO device.
156 * @np: pointer to device tree node
157 *
158 * This function probes the GPIO device in the device tree. It initializes the
159 * driver data structure. It returns 0, if the driver is bound to the GPIO
160 * device, or a negative value if there is an error.
161 */
162static int __devinit xgpio_of_probe(struct device_node *np)
163{
164 struct xgpio_instance *chip;
165 int status = 0;
166 const u32 *tree_info;
167
168 chip = kzalloc(sizeof(*chip), GFP_KERNEL);
169 if (!chip)
170 return -ENOMEM;
171
172 /* Update GPIO state shadow register with default value */
173 tree_info = of_get_property(np, "xlnx,dout-default", NULL);
174 if (tree_info)
175 chip->gpio_state = be32_to_cpup(tree_info);
176
177 /* Update GPIO direction shadow register with default value */
178 chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */
179 tree_info = of_get_property(np, "xlnx,tri-default", NULL);
180 if (tree_info)
181 chip->gpio_dir = be32_to_cpup(tree_info);
182
183 /* Check device node and parent device node for device width */
184 chip->mmchip.gc.ngpio = 32; /* By default assume full GPIO controller */
185 tree_info = of_get_property(np, "xlnx,gpio-width", NULL);
186 if (!tree_info)
187 tree_info = of_get_property(np->parent,
188 "xlnx,gpio-width", NULL);
189 if (tree_info)
190 chip->mmchip.gc.ngpio = be32_to_cpup(tree_info);
191
192 spin_lock_init(&chip->gpio_lock);
193
194 chip->mmchip.gc.direction_input = xgpio_dir_in;
195 chip->mmchip.gc.direction_output = xgpio_dir_out;
196 chip->mmchip.gc.get = xgpio_get;
197 chip->mmchip.gc.set = xgpio_set;
198
199 chip->mmchip.save_regs = xgpio_save_regs;
200
201 /* Call the OF gpio helper to setup and register the GPIO device */
202 status = of_mm_gpiochip_add(np, &chip->mmchip);
203 if (status) {
204 kfree(chip);
205 pr_err("%s: error in probe function with status %d\n",
206 np->full_name, status);
207 return status;
208 }
209 return 0;
210}
211
212static struct of_device_id xgpio_of_match[] __devinitdata = {
213 { .compatible = "xlnx,xps-gpio-1.00.a", },
214 { /* end of list */ },
215};
216
217static int __init xgpio_init(void)
218{
219 struct device_node *np;
220
221 for_each_matching_node(np, xgpio_of_match)
222 xgpio_of_probe(np);
223
224 return 0;
225}
226
227/* Make sure we get initialized before anyone else tries to use us */
228subsys_initcall(xgpio_init);
229/* No exit call at the moment as we cannot unregister of GPIO chips */
230
231MODULE_AUTHOR("Xilinx, Inc.");
232MODULE_DESCRIPTION("Xilinx GPIO driver");
233MODULE_LICENSE("GPL");
1/*
2 * Xilinx gpio driver for xps/axi_gpio IP.
3 *
4 * Copyright 2008 - 2013 Xilinx, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
9 *
10 * You should have received a copy of the GNU General Public License
11 * along with this program; if not, write to the Free Software
12 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
13 */
14
15#include <linux/bitops.h>
16#include <linux/init.h>
17#include <linux/errno.h>
18#include <linux/module.h>
19#include <linux/of_device.h>
20#include <linux/of_platform.h>
21#include <linux/of_gpio.h>
22#include <linux/io.h>
23#include <linux/gpio.h>
24#include <linux/slab.h>
25
26/* Register Offset Definitions */
27#define XGPIO_DATA_OFFSET (0x0) /* Data register */
28#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
29
30#define XGPIO_CHANNEL_OFFSET 0x8
31
32/* Read/Write access to the GPIO registers */
33#if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
34# define xgpio_readreg(offset) readl(offset)
35# define xgpio_writereg(offset, val) writel(val, offset)
36#else
37# define xgpio_readreg(offset) __raw_readl(offset)
38# define xgpio_writereg(offset, val) __raw_writel(val, offset)
39#endif
40
41/**
42 * struct xgpio_instance - Stores information about GPIO device
43 * @mmchip: OF GPIO chip for memory mapped banks
44 * @gpio_width: GPIO width for every channel
45 * @gpio_state: GPIO state shadow register
46 * @gpio_dir: GPIO direction shadow register
47 * @gpio_lock: Lock used for synchronization
48 */
49struct xgpio_instance {
50 struct of_mm_gpio_chip mmchip;
51 unsigned int gpio_width[2];
52 u32 gpio_state[2];
53 u32 gpio_dir[2];
54 spinlock_t gpio_lock[2];
55};
56
57static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
58{
59 if (gpio >= chip->gpio_width[0])
60 return 1;
61
62 return 0;
63}
64
65static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio)
66{
67 if (xgpio_index(chip, gpio))
68 return XGPIO_CHANNEL_OFFSET;
69
70 return 0;
71}
72
73static inline int xgpio_offset(struct xgpio_instance *chip, int gpio)
74{
75 if (xgpio_index(chip, gpio))
76 return gpio - chip->gpio_width[0];
77
78 return gpio;
79}
80
81/**
82 * xgpio_get - Read the specified signal of the GPIO device.
83 * @gc: Pointer to gpio_chip device structure.
84 * @gpio: GPIO signal number.
85 *
86 * This function reads the specified signal of the GPIO device.
87 *
88 * Return:
89 * 0 if direction of GPIO signals is set as input otherwise it
90 * returns negative error value.
91 */
92static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
93{
94 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
95 struct xgpio_instance *chip = gpiochip_get_data(gc);
96 u32 val;
97
98 val = xgpio_readreg(mm_gc->regs + XGPIO_DATA_OFFSET +
99 xgpio_regoffset(chip, gpio));
100
101 return !!(val & BIT(xgpio_offset(chip, gpio)));
102}
103
104/**
105 * xgpio_set - Write the specified signal of the GPIO device.
106 * @gc: Pointer to gpio_chip device structure.
107 * @gpio: GPIO signal number.
108 * @val: Value to be written to specified signal.
109 *
110 * This function writes the specified value in to the specified signal of the
111 * GPIO device.
112 */
113static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
114{
115 unsigned long flags;
116 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
117 struct xgpio_instance *chip = gpiochip_get_data(gc);
118 int index = xgpio_index(chip, gpio);
119 int offset = xgpio_offset(chip, gpio);
120
121 spin_lock_irqsave(&chip->gpio_lock[index], flags);
122
123 /* Write to GPIO signal and set its direction to output */
124 if (val)
125 chip->gpio_state[index] |= BIT(offset);
126 else
127 chip->gpio_state[index] &= ~BIT(offset);
128
129 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
130 xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
131
132 spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
133}
134
135/**
136 * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
137 * @gc: Pointer to gpio_chip device structure.
138 * @gpio: GPIO signal number.
139 *
140 * Return:
141 * 0 - if direction of GPIO signals is set as input
142 * otherwise it returns negative error value.
143 */
144static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
145{
146 unsigned long flags;
147 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
148 struct xgpio_instance *chip = gpiochip_get_data(gc);
149 int index = xgpio_index(chip, gpio);
150 int offset = xgpio_offset(chip, gpio);
151
152 spin_lock_irqsave(&chip->gpio_lock[index], flags);
153
154 /* Set the GPIO bit in shadow register and set direction as input */
155 chip->gpio_dir[index] |= BIT(offset);
156 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
157 xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
158
159 spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
160
161 return 0;
162}
163
164/**
165 * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
166 * @gc: Pointer to gpio_chip device structure.
167 * @gpio: GPIO signal number.
168 * @val: Value to be written to specified signal.
169 *
170 * This function sets the direction of specified GPIO signal as output.
171 *
172 * Return:
173 * If all GPIO signals of GPIO chip is configured as input then it returns
174 * error otherwise it returns 0.
175 */
176static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
177{
178 unsigned long flags;
179 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
180 struct xgpio_instance *chip = gpiochip_get_data(gc);
181 int index = xgpio_index(chip, gpio);
182 int offset = xgpio_offset(chip, gpio);
183
184 spin_lock_irqsave(&chip->gpio_lock[index], flags);
185
186 /* Write state of GPIO signal */
187 if (val)
188 chip->gpio_state[index] |= BIT(offset);
189 else
190 chip->gpio_state[index] &= ~BIT(offset);
191 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
192 xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
193
194 /* Clear the GPIO bit in shadow register and set direction as output */
195 chip->gpio_dir[index] &= ~BIT(offset);
196 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
197 xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
198
199 spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
200
201 return 0;
202}
203
204/**
205 * xgpio_save_regs - Set initial values of GPIO pins
206 * @mm_gc: Pointer to memory mapped GPIO chip structure
207 */
208static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
209{
210 struct xgpio_instance *chip =
211 container_of(mm_gc, struct xgpio_instance, mmchip);
212
213 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]);
214 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]);
215
216 if (!chip->gpio_width[1])
217 return;
218
219 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET,
220 chip->gpio_state[1]);
221 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET,
222 chip->gpio_dir[1]);
223}
224
225/**
226 * xgpio_remove - Remove method for the GPIO device.
227 * @pdev: pointer to the platform device
228 *
229 * This function remove gpiochips and frees all the allocated resources.
230 *
231 * Return: 0 always
232 */
233static int xgpio_remove(struct platform_device *pdev)
234{
235 struct xgpio_instance *chip = platform_get_drvdata(pdev);
236
237 of_mm_gpiochip_remove(&chip->mmchip);
238
239 return 0;
240}
241
242/**
243 * xgpio_of_probe - Probe method for the GPIO device.
244 * @pdev: pointer to the platform device
245 *
246 * Return:
247 * It returns 0, if the driver is bound to the GPIO device, or
248 * a negative value if there is an error.
249 */
250static int xgpio_probe(struct platform_device *pdev)
251{
252 struct xgpio_instance *chip;
253 int status = 0;
254 struct device_node *np = pdev->dev.of_node;
255 u32 is_dual;
256
257 chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
258 if (!chip)
259 return -ENOMEM;
260
261 platform_set_drvdata(pdev, chip);
262
263 /* Update GPIO state shadow register with default value */
264 of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]);
265
266 /* Update GPIO direction shadow register with default value */
267 if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
268 chip->gpio_dir[0] = 0xFFFFFFFF;
269
270 /*
271 * Check device node and parent device node for device width
272 * and assume default width of 32
273 */
274 if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0]))
275 chip->gpio_width[0] = 32;
276
277 spin_lock_init(&chip->gpio_lock[0]);
278
279 if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
280 is_dual = 0;
281
282 if (is_dual) {
283 /* Update GPIO state shadow register with default value */
284 of_property_read_u32(np, "xlnx,dout-default-2",
285 &chip->gpio_state[1]);
286
287 /* Update GPIO direction shadow register with default value */
288 if (of_property_read_u32(np, "xlnx,tri-default-2",
289 &chip->gpio_dir[1]))
290 chip->gpio_dir[1] = 0xFFFFFFFF;
291
292 /*
293 * Check device node and parent device node for device width
294 * and assume default width of 32
295 */
296 if (of_property_read_u32(np, "xlnx,gpio2-width",
297 &chip->gpio_width[1]))
298 chip->gpio_width[1] = 32;
299
300 spin_lock_init(&chip->gpio_lock[1]);
301 }
302
303 chip->mmchip.gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1];
304 chip->mmchip.gc.parent = &pdev->dev;
305 chip->mmchip.gc.direction_input = xgpio_dir_in;
306 chip->mmchip.gc.direction_output = xgpio_dir_out;
307 chip->mmchip.gc.get = xgpio_get;
308 chip->mmchip.gc.set = xgpio_set;
309
310 chip->mmchip.save_regs = xgpio_save_regs;
311
312 /* Call the OF gpio helper to setup and register the GPIO device */
313 status = of_mm_gpiochip_add_data(np, &chip->mmchip, chip);
314 if (status) {
315 pr_err("%s: error in probe function with status %d\n",
316 np->full_name, status);
317 return status;
318 }
319
320 return 0;
321}
322
323static const struct of_device_id xgpio_of_match[] = {
324 { .compatible = "xlnx,xps-gpio-1.00.a", },
325 { /* end of list */ },
326};
327
328MODULE_DEVICE_TABLE(of, xgpio_of_match);
329
330static struct platform_driver xgpio_plat_driver = {
331 .probe = xgpio_probe,
332 .remove = xgpio_remove,
333 .driver = {
334 .name = "gpio-xilinx",
335 .of_match_table = xgpio_of_match,
336 },
337};
338
339static int __init xgpio_init(void)
340{
341 return platform_driver_register(&xgpio_plat_driver);
342}
343
344subsys_initcall(xgpio_init);
345
346static void __exit xgpio_exit(void)
347{
348 platform_driver_unregister(&xgpio_plat_driver);
349}
350module_exit(xgpio_exit);
351
352MODULE_AUTHOR("Xilinx, Inc.");
353MODULE_DESCRIPTION("Xilinx GPIO driver");
354MODULE_LICENSE("GPL");