Loading...
1/*
2 * Xilinx gpio driver
3 *
4 * Copyright 2008 Xilinx, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
9 *
10 * You should have received a copy of the GNU General Public License
11 * along with this program; if not, write to the Free Software
12 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
13 */
14
15#include <linux/init.h>
16#include <linux/errno.h>
17#include <linux/module.h>
18#include <linux/of_device.h>
19#include <linux/of_platform.h>
20#include <linux/of_gpio.h>
21#include <linux/io.h>
22#include <linux/gpio.h>
23#include <linux/slab.h>
24
25/* Register Offset Definitions */
26#define XGPIO_DATA_OFFSET (0x0) /* Data register */
27#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
28
29struct xgpio_instance {
30 struct of_mm_gpio_chip mmchip;
31 u32 gpio_state; /* GPIO state shadow register */
32 u32 gpio_dir; /* GPIO direction shadow register */
33 spinlock_t gpio_lock; /* Lock used for synchronization */
34};
35
36/**
37 * xgpio_get - Read the specified signal of the GPIO device.
38 * @gc: Pointer to gpio_chip device structure.
39 * @gpio: GPIO signal number.
40 *
41 * This function reads the specified signal of the GPIO device. It returns 0 if
42 * the signal clear, 1 if signal is set or negative value on error.
43 */
44static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
45{
46 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
47
48 return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1;
49}
50
51/**
52 * xgpio_set - Write the specified signal of the GPIO device.
53 * @gc: Pointer to gpio_chip device structure.
54 * @gpio: GPIO signal number.
55 * @val: Value to be written to specified signal.
56 *
57 * This function writes the specified value in to the specified signal of the
58 * GPIO device.
59 */
60static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
61{
62 unsigned long flags;
63 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
64 struct xgpio_instance *chip =
65 container_of(mm_gc, struct xgpio_instance, mmchip);
66
67 spin_lock_irqsave(&chip->gpio_lock, flags);
68
69 /* Write to GPIO signal and set its direction to output */
70 if (val)
71 chip->gpio_state |= 1 << gpio;
72 else
73 chip->gpio_state &= ~(1 << gpio);
74 out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
75
76 spin_unlock_irqrestore(&chip->gpio_lock, flags);
77}
78
79/**
80 * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
81 * @gc: Pointer to gpio_chip device structure.
82 * @gpio: GPIO signal number.
83 *
84 * This function sets the direction of specified GPIO signal as input.
85 * It returns 0 if direction of GPIO signals is set as input otherwise it
86 * returns negative error value.
87 */
88static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
89{
90 unsigned long flags;
91 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
92 struct xgpio_instance *chip =
93 container_of(mm_gc, struct xgpio_instance, mmchip);
94
95 spin_lock_irqsave(&chip->gpio_lock, flags);
96
97 /* Set the GPIO bit in shadow register and set direction as input */
98 chip->gpio_dir |= (1 << gpio);
99 out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
100
101 spin_unlock_irqrestore(&chip->gpio_lock, flags);
102
103 return 0;
104}
105
106/**
107 * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
108 * @gc: Pointer to gpio_chip device structure.
109 * @gpio: GPIO signal number.
110 * @val: Value to be written to specified signal.
111 *
112 * This function sets the direction of specified GPIO signal as output. If all
113 * GPIO signals of GPIO chip is configured as input then it returns
114 * error otherwise it returns 0.
115 */
116static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
117{
118 unsigned long flags;
119 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
120 struct xgpio_instance *chip =
121 container_of(mm_gc, struct xgpio_instance, mmchip);
122
123 spin_lock_irqsave(&chip->gpio_lock, flags);
124
125 /* Write state of GPIO signal */
126 if (val)
127 chip->gpio_state |= 1 << gpio;
128 else
129 chip->gpio_state &= ~(1 << gpio);
130 out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
131
132 /* Clear the GPIO bit in shadow register and set direction as output */
133 chip->gpio_dir &= (~(1 << gpio));
134 out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
135
136 spin_unlock_irqrestore(&chip->gpio_lock, flags);
137
138 return 0;
139}
140
141/**
142 * xgpio_save_regs - Set initial values of GPIO pins
143 * @mm_gc: pointer to memory mapped GPIO chip structure
144 */
145static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
146{
147 struct xgpio_instance *chip =
148 container_of(mm_gc, struct xgpio_instance, mmchip);
149
150 out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
151 out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
152}
153
154/**
155 * xgpio_of_probe - Probe method for the GPIO device.
156 * @np: pointer to device tree node
157 *
158 * This function probes the GPIO device in the device tree. It initializes the
159 * driver data structure. It returns 0, if the driver is bound to the GPIO
160 * device, or a negative value if there is an error.
161 */
162static int __devinit xgpio_of_probe(struct device_node *np)
163{
164 struct xgpio_instance *chip;
165 int status = 0;
166 const u32 *tree_info;
167
168 chip = kzalloc(sizeof(*chip), GFP_KERNEL);
169 if (!chip)
170 return -ENOMEM;
171
172 /* Update GPIO state shadow register with default value */
173 tree_info = of_get_property(np, "xlnx,dout-default", NULL);
174 if (tree_info)
175 chip->gpio_state = be32_to_cpup(tree_info);
176
177 /* Update GPIO direction shadow register with default value */
178 chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */
179 tree_info = of_get_property(np, "xlnx,tri-default", NULL);
180 if (tree_info)
181 chip->gpio_dir = be32_to_cpup(tree_info);
182
183 /* Check device node and parent device node for device width */
184 chip->mmchip.gc.ngpio = 32; /* By default assume full GPIO controller */
185 tree_info = of_get_property(np, "xlnx,gpio-width", NULL);
186 if (!tree_info)
187 tree_info = of_get_property(np->parent,
188 "xlnx,gpio-width", NULL);
189 if (tree_info)
190 chip->mmchip.gc.ngpio = be32_to_cpup(tree_info);
191
192 spin_lock_init(&chip->gpio_lock);
193
194 chip->mmchip.gc.direction_input = xgpio_dir_in;
195 chip->mmchip.gc.direction_output = xgpio_dir_out;
196 chip->mmchip.gc.get = xgpio_get;
197 chip->mmchip.gc.set = xgpio_set;
198
199 chip->mmchip.save_regs = xgpio_save_regs;
200
201 /* Call the OF gpio helper to setup and register the GPIO device */
202 status = of_mm_gpiochip_add(np, &chip->mmchip);
203 if (status) {
204 kfree(chip);
205 pr_err("%s: error in probe function with status %d\n",
206 np->full_name, status);
207 return status;
208 }
209 return 0;
210}
211
212static struct of_device_id xgpio_of_match[] __devinitdata = {
213 { .compatible = "xlnx,xps-gpio-1.00.a", },
214 { /* end of list */ },
215};
216
217static int __init xgpio_init(void)
218{
219 struct device_node *np;
220
221 for_each_matching_node(np, xgpio_of_match)
222 xgpio_of_probe(np);
223
224 return 0;
225}
226
227/* Make sure we get initialized before anyone else tries to use us */
228subsys_initcall(xgpio_init);
229/* No exit call at the moment as we cannot unregister of GPIO chips */
230
231MODULE_AUTHOR("Xilinx, Inc.");
232MODULE_DESCRIPTION("Xilinx GPIO driver");
233MODULE_LICENSE("GPL");
1/*
2 * Xilinx gpio driver for xps/axi_gpio IP.
3 *
4 * Copyright 2008 - 2013 Xilinx, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
9 *
10 * You should have received a copy of the GNU General Public License
11 * along with this program; if not, write to the Free Software
12 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
13 */
14
15#include <linux/bitops.h>
16#include <linux/init.h>
17#include <linux/errno.h>
18#include <linux/module.h>
19#include <linux/of_device.h>
20#include <linux/of_platform.h>
21#include <linux/of_gpio.h>
22#include <linux/io.h>
23#include <linux/gpio.h>
24#include <linux/slab.h>
25
26/* Register Offset Definitions */
27#define XGPIO_DATA_OFFSET (0x0) /* Data register */
28#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
29
30#define XGPIO_CHANNEL_OFFSET 0x8
31
32/* Read/Write access to the GPIO registers */
33#ifdef CONFIG_ARCH_ZYNQ
34# define xgpio_readreg(offset) readl(offset)
35# define xgpio_writereg(offset, val) writel(val, offset)
36#else
37# define xgpio_readreg(offset) __raw_readl(offset)
38# define xgpio_writereg(offset, val) __raw_writel(val, offset)
39#endif
40
41/**
42 * struct xgpio_instance - Stores information about GPIO device
43 * struct of_mm_gpio_chip mmchip: OF GPIO chip for memory mapped banks
44 * gpio_state: GPIO state shadow register
45 * gpio_dir: GPIO direction shadow register
46 * offset: GPIO channel offset
47 * gpio_lock: Lock used for synchronization
48 */
49struct xgpio_instance {
50 struct of_mm_gpio_chip mmchip;
51 u32 gpio_state;
52 u32 gpio_dir;
53 u32 offset;
54 spinlock_t gpio_lock;
55};
56
57/**
58 * xgpio_get - Read the specified signal of the GPIO device.
59 * @gc: Pointer to gpio_chip device structure.
60 * @gpio: GPIO signal number.
61 *
62 * This function reads the specified signal of the GPIO device. It returns 0 if
63 * the signal clear, 1 if signal is set or negative value on error.
64 */
65static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
66{
67 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
68 struct xgpio_instance *chip =
69 container_of(mm_gc, struct xgpio_instance, mmchip);
70
71 void __iomem *regs = mm_gc->regs + chip->offset;
72
73 return !!(xgpio_readreg(regs + XGPIO_DATA_OFFSET) & BIT(gpio));
74}
75
76/**
77 * xgpio_set - Write the specified signal of the GPIO device.
78 * @gc: Pointer to gpio_chip device structure.
79 * @gpio: GPIO signal number.
80 * @val: Value to be written to specified signal.
81 *
82 * This function writes the specified value in to the specified signal of the
83 * GPIO device.
84 */
85static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
86{
87 unsigned long flags;
88 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
89 struct xgpio_instance *chip =
90 container_of(mm_gc, struct xgpio_instance, mmchip);
91 void __iomem *regs = mm_gc->regs;
92
93 spin_lock_irqsave(&chip->gpio_lock, flags);
94
95 /* Write to GPIO signal and set its direction to output */
96 if (val)
97 chip->gpio_state |= BIT(gpio);
98 else
99 chip->gpio_state &= ~BIT(gpio);
100
101 xgpio_writereg(regs + chip->offset + XGPIO_DATA_OFFSET,
102 chip->gpio_state);
103
104 spin_unlock_irqrestore(&chip->gpio_lock, flags);
105}
106
107/**
108 * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
109 * @gc: Pointer to gpio_chip device structure.
110 * @gpio: GPIO signal number.
111 *
112 * This function sets the direction of specified GPIO signal as input.
113 * It returns 0 if direction of GPIO signals is set as input otherwise it
114 * returns negative error value.
115 */
116static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
117{
118 unsigned long flags;
119 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
120 struct xgpio_instance *chip =
121 container_of(mm_gc, struct xgpio_instance, mmchip);
122 void __iomem *regs = mm_gc->regs;
123
124 spin_lock_irqsave(&chip->gpio_lock, flags);
125
126 /* Set the GPIO bit in shadow register and set direction as input */
127 chip->gpio_dir |= BIT(gpio);
128 xgpio_writereg(regs + chip->offset + XGPIO_TRI_OFFSET, chip->gpio_dir);
129
130 spin_unlock_irqrestore(&chip->gpio_lock, flags);
131
132 return 0;
133}
134
135/**
136 * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
137 * @gc: Pointer to gpio_chip device structure.
138 * @gpio: GPIO signal number.
139 * @val: Value to be written to specified signal.
140 *
141 * This function sets the direction of specified GPIO signal as output. If all
142 * GPIO signals of GPIO chip is configured as input then it returns
143 * error otherwise it returns 0.
144 */
145static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
146{
147 unsigned long flags;
148 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
149 struct xgpio_instance *chip =
150 container_of(mm_gc, struct xgpio_instance, mmchip);
151 void __iomem *regs = mm_gc->regs;
152
153 spin_lock_irqsave(&chip->gpio_lock, flags);
154
155 /* Write state of GPIO signal */
156 if (val)
157 chip->gpio_state |= BIT(gpio);
158 else
159 chip->gpio_state &= ~BIT(gpio);
160 xgpio_writereg(regs + chip->offset + XGPIO_DATA_OFFSET,
161 chip->gpio_state);
162
163 /* Clear the GPIO bit in shadow register and set direction as output */
164 chip->gpio_dir &= ~BIT(gpio);
165 xgpio_writereg(regs + chip->offset + XGPIO_TRI_OFFSET, chip->gpio_dir);
166
167 spin_unlock_irqrestore(&chip->gpio_lock, flags);
168
169 return 0;
170}
171
172/**
173 * xgpio_save_regs - Set initial values of GPIO pins
174 * @mm_gc: pointer to memory mapped GPIO chip structure
175 */
176static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
177{
178 struct xgpio_instance *chip =
179 container_of(mm_gc, struct xgpio_instance, mmchip);
180
181 xgpio_writereg(mm_gc->regs + chip->offset + XGPIO_DATA_OFFSET,
182 chip->gpio_state);
183 xgpio_writereg(mm_gc->regs + chip->offset + XGPIO_TRI_OFFSET,
184 chip->gpio_dir);
185}
186
187/**
188 * xgpio_of_probe - Probe method for the GPIO device.
189 * @np: pointer to device tree node
190 *
191 * This function probes the GPIO device in the device tree. It initializes the
192 * driver data structure. It returns 0, if the driver is bound to the GPIO
193 * device, or a negative value if there is an error.
194 */
195static int xgpio_of_probe(struct device_node *np)
196{
197 struct xgpio_instance *chip;
198 int status = 0;
199 const u32 *tree_info;
200
201 chip = kzalloc(sizeof(*chip), GFP_KERNEL);
202 if (!chip)
203 return -ENOMEM;
204
205 /* Update GPIO state shadow register with default value */
206 of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state);
207
208 /* By default, all pins are inputs */
209 chip->gpio_dir = 0xFFFFFFFF;
210
211 /* Update GPIO direction shadow register with default value */
212 of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir);
213
214 /* By default assume full GPIO controller */
215 chip->mmchip.gc.ngpio = 32;
216
217 /* Check device node and parent device node for device width */
218 of_property_read_u32(np, "xlnx,gpio-width",
219 (u32 *)&chip->mmchip.gc.ngpio);
220
221 spin_lock_init(&chip->gpio_lock);
222
223 chip->mmchip.gc.direction_input = xgpio_dir_in;
224 chip->mmchip.gc.direction_output = xgpio_dir_out;
225 chip->mmchip.gc.get = xgpio_get;
226 chip->mmchip.gc.set = xgpio_set;
227
228 chip->mmchip.save_regs = xgpio_save_regs;
229
230 /* Call the OF gpio helper to setup and register the GPIO device */
231 status = of_mm_gpiochip_add(np, &chip->mmchip);
232 if (status) {
233 kfree(chip);
234 pr_err("%s: error in probe function with status %d\n",
235 np->full_name, status);
236 return status;
237 }
238
239 pr_info("XGpio: %s: registered, base is %d\n", np->full_name,
240 chip->mmchip.gc.base);
241
242 tree_info = of_get_property(np, "xlnx,is-dual", NULL);
243 if (tree_info && be32_to_cpup(tree_info)) {
244 chip = kzalloc(sizeof(*chip), GFP_KERNEL);
245 if (!chip)
246 return -ENOMEM;
247
248 /* Add dual channel offset */
249 chip->offset = XGPIO_CHANNEL_OFFSET;
250
251 /* Update GPIO state shadow register with default value */
252 of_property_read_u32(np, "xlnx,dout-default-2",
253 &chip->gpio_state);
254
255 /* By default, all pins are inputs */
256 chip->gpio_dir = 0xFFFFFFFF;
257
258 /* Update GPIO direction shadow register with default value */
259 of_property_read_u32(np, "xlnx,tri-default-2", &chip->gpio_dir);
260
261 /* By default assume full GPIO controller */
262 chip->mmchip.gc.ngpio = 32;
263
264 /* Check device node and parent device node for device width */
265 of_property_read_u32(np, "xlnx,gpio2-width",
266 (u32 *)&chip->mmchip.gc.ngpio);
267
268 spin_lock_init(&chip->gpio_lock);
269
270 chip->mmchip.gc.direction_input = xgpio_dir_in;
271 chip->mmchip.gc.direction_output = xgpio_dir_out;
272 chip->mmchip.gc.get = xgpio_get;
273 chip->mmchip.gc.set = xgpio_set;
274
275 chip->mmchip.save_regs = xgpio_save_regs;
276
277 /* Call the OF gpio helper to setup and register the GPIO dev */
278 status = of_mm_gpiochip_add(np, &chip->mmchip);
279 if (status) {
280 kfree(chip);
281 pr_err("%s: error in probe function with status %d\n",
282 np->full_name, status);
283 return status;
284 }
285 pr_info("XGpio: %s: dual channel registered, base is %d\n",
286 np->full_name, chip->mmchip.gc.base);
287 }
288
289 return 0;
290}
291
292static struct of_device_id xgpio_of_match[] = {
293 { .compatible = "xlnx,xps-gpio-1.00.a", },
294 { /* end of list */ },
295};
296
297static int __init xgpio_init(void)
298{
299 struct device_node *np;
300
301 for_each_matching_node(np, xgpio_of_match)
302 xgpio_of_probe(np);
303
304 return 0;
305}
306
307/* Make sure we get initialized before anyone else tries to use us */
308subsys_initcall(xgpio_init);
309/* No exit call at the moment as we cannot unregister of GPIO chips */
310
311MODULE_AUTHOR("Xilinx, Inc.");
312MODULE_DESCRIPTION("Xilinx GPIO driver");
313MODULE_LICENSE("GPL");