Loading...
1#
2# GPIO infrastructure and drivers
3#
4
5config ARCH_HAVE_CUSTOM_GPIO_H
6 bool
7 help
8 Selecting this config option from the architecture Kconfig allows
9 the architecture to provide a custom asm/gpio.h implementation
10 overriding the default implementations. New uses of this are
11 strongly discouraged.
12
13config ARCH_WANT_OPTIONAL_GPIOLIB
14 bool
15 help
16 Select this config option from the architecture Kconfig, if
17 it is possible to use gpiolib on the architecture, but let the
18 user decide whether to actually build it or not.
19 Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
20 not depend on GPIOs being available, but rather let the user
21 decide whether he needs it or not.
22
23config ARCH_REQUIRE_GPIOLIB
24 bool
25 select GPIOLIB
26 help
27 Platforms select gpiolib if they use this infrastructure
28 for all their GPIOs, usually starting with ones integrated
29 into SOC processors.
30 Selecting this from the architecture code will cause the gpiolib
31 code to always get built in.
32
33
34
35menuconfig GPIOLIB
36 bool "GPIO Support"
37 depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
38 select GENERIC_GPIO
39 help
40 This enables GPIO support through the generic GPIO library.
41 You only need to enable this, if you also want to enable
42 one or more of the GPIO drivers below.
43
44 If unsure, say N.
45
46if GPIOLIB
47
48config OF_GPIO
49 def_bool y
50 depends on OF && !SPARC
51
52config DEBUG_GPIO
53 bool "Debug GPIO calls"
54 depends on DEBUG_KERNEL
55 help
56 Say Y here to add some extra checks and diagnostics to GPIO calls.
57 These checks help ensure that GPIOs have been properly initialized
58 before they are used, and that sleeping calls are not made from
59 non-sleeping contexts. They can make bitbanged serial protocols
60 slower. The diagnostics help catch the type of setup errors
61 that are most common when setting up new platforms or boards.
62
63config GPIO_SYSFS
64 bool "/sys/class/gpio/... (sysfs interface)"
65 depends on SYSFS && EXPERIMENTAL
66 help
67 Say Y here to add a sysfs interface for GPIOs.
68
69 This is mostly useful to work around omissions in a system's
70 kernel support. Those are common in custom and semicustom
71 hardware assembled using standard kernels with a minimum of
72 custom patches. In those cases, userspace code may import
73 a given GPIO from the kernel, if no kernel driver requested it.
74
75 Kernel drivers may also request that a particular GPIO be
76 exported to userspace; this can be useful when debugging.
77
78config GPIO_GENERIC
79 tristate
80
81# put drivers in the right section, in alphabetical order
82
83config GPIO_DA9052
84 tristate "Dialog DA9052 GPIO"
85 depends on PMIC_DA9052 && BROKEN
86 help
87 Say yes here to enable the GPIO driver for the DA9052 chip.
88
89config GPIO_MAX730X
90 tristate
91
92comment "Memory mapped GPIO drivers:"
93
94config GPIO_GENERIC_PLATFORM
95 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
96 select GPIO_GENERIC
97 help
98 Say yes here to support basic platform_device memory-mapped GPIO controllers.
99
100config GPIO_IT8761E
101 tristate "IT8761E GPIO support"
102 depends on X86 # unconditional access to IO space.
103 help
104 Say yes here to support GPIO functionality of IT8761E super I/O chip.
105
106config GPIO_EM
107 tristate "Emma Mobile GPIO"
108 depends on ARM
109 help
110 Say yes here to support GPIO on Renesas Emma Mobile SoCs.
111
112config GPIO_EP93XX
113 def_bool y
114 depends on ARCH_EP93XX
115 select GPIO_GENERIC
116
117config GPIO_MM_LANTIQ
118 bool "Lantiq Memory mapped GPIOs"
119 depends on LANTIQ && SOC_XWAY
120 help
121 This enables support for memory mapped GPIOs on the External Bus Unit
122 (EBU) found on Lantiq SoCs. The gpios are output only as they are
123 created by attaching a 16bit latch to the bus.
124
125config GPIO_MPC5200
126 def_bool y
127 depends on PPC_MPC52xx
128
129config GPIO_MPC8XXX
130 bool "MPC512x/MPC8xxx GPIO support"
131 depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
132 FSL_SOC_BOOKE || PPC_86xx
133 help
134 Say Y here if you're going to use hardware that connects to the
135 MPC512x/831x/834x/837x/8572/8610 GPIOs.
136
137config GPIO_MSM_V1
138 tristate "Qualcomm MSM GPIO v1"
139 depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
140 help
141 Say yes here to support the GPIO interface on ARM v6 based
142 Qualcomm MSM chips. Most of the pins on the MSM can be
143 selected for GPIO, and are controlled by this driver.
144
145config GPIO_MSM_V2
146 tristate "Qualcomm MSM GPIO v2"
147 depends on GPIOLIB && ARCH_MSM
148 help
149 Say yes here to support the GPIO interface on ARM v7 based
150 Qualcomm MSM chips. Most of the pins on the MSM can be
151 selected for GPIO, and are controlled by this driver.
152
153config GPIO_MXC
154 def_bool y
155 depends on ARCH_MXC
156 select GPIO_GENERIC
157 select GENERIC_IRQ_CHIP
158
159config GPIO_MXS
160 def_bool y
161 depends on ARCH_MXS
162 select GPIO_GENERIC
163 select GENERIC_IRQ_CHIP
164
165config GPIO_PL061
166 bool "PrimeCell PL061 GPIO support"
167 depends on ARM_AMBA
168 select GENERIC_IRQ_CHIP
169 help
170 Say yes here to support the PrimeCell PL061 GPIO device
171
172config GPIO_PXA
173 bool "PXA GPIO support"
174 depends on ARCH_PXA || ARCH_MMP
175 help
176 Say yes here to support the PXA GPIO device
177
178config GPIO_STA2X11
179 bool "STA2x11/ConneXt GPIO support"
180 depends on MFD_STA2X11
181 select GENERIC_IRQ_CHIP
182 help
183 Say yes here to support the STA2x11/ConneXt GPIO device.
184 The GPIO module has 128 GPIO pins with alternate functions.
185
186config GPIO_XILINX
187 bool "Xilinx GPIO support"
188 depends on PPC_OF || MICROBLAZE
189 help
190 Say yes here to support the Xilinx FPGA GPIO device
191
192config GPIO_VR41XX
193 tristate "NEC VR4100 series General-purpose I/O Uint support"
194 depends on CPU_VR41XX
195 help
196 Say yes here to support the NEC VR4100 series General-purpose I/O Uint
197
198config GPIO_SCH
199 tristate "Intel SCH/TunnelCreek/Centerton GPIO"
200 depends on PCI && X86
201 select MFD_CORE
202 select LPC_SCH
203 help
204 Say yes here to support GPIO interface on Intel Poulsbo SCH,
205 Intel Tunnel Creek processor or Intel Centerton processor.
206 The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
207 powered by the core power rail and are turned off during sleep
208 modes (S3 and higher). The remaining four GPIOs are powered by
209 the Intel SCH suspend power supply. These GPIOs remain
210 active during S3. The suspend powered GPIOs can be used to wake the
211 system from the Suspend-to-RAM state.
212 The Intel Tunnel Creek processor has 5 GPIOs powered by the
213 core power rail and 9 from suspend power supply.
214 The Intel Centerton processor has a total of 30 GPIO pins.
215 Twenty-one are powered by the core power rail and 9 from the
216 suspend power supply.
217
218config GPIO_ICH
219 tristate "Intel ICH GPIO"
220 depends on PCI && X86
221 select MFD_CORE
222 select LPC_ICH
223 help
224 Say yes here to support the GPIO functionality of a number of Intel
225 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
226 ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
227 Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
228
229 If unsure, say N.
230
231config GPIO_VX855
232 tristate "VIA VX855/VX875 GPIO"
233 depends on PCI
234 select MFD_CORE
235 select MFD_VX855
236 help
237 Support access to the VX855/VX875 GPIO lines through the gpio library.
238
239 This driver provides common support for accessing the device,
240 additional drivers must be enabled in order to use the
241 functionality of the device.
242
243config GPIO_GE_FPGA
244 bool "GE FPGA based GPIO"
245 depends on GE_FPGA
246 help
247 Support for common GPIO functionality provided on some GE Single Board
248 Computers.
249
250 This driver provides basic support (configure as input or output, read
251 and write pin state) for GPIO implemented in a number of GE single
252 board computers.
253
254comment "I2C GPIO expanders:"
255
256config GPIO_MAX7300
257 tristate "Maxim MAX7300 GPIO expander"
258 depends on I2C
259 select GPIO_MAX730X
260 help
261 GPIO driver for Maxim MAX7301 I2C-based GPIO expander.
262
263config GPIO_MAX732X
264 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
265 depends on I2C
266 help
267 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
268 Port Expanders. Each IO port on these chips has a fixed role of
269 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
270 Input and Output (designed by 'P'). The combinations are listed
271 below:
272
273 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
274 max7322 (4I4O), max7323 (4P4O)
275
276 16 bits: max7324 (8I8O), max7325 (8P8O),
277 max7326 (4I12O), max7327 (4P12O)
278
279 Board setup code must specify the model to use, and the start
280 number for these GPIOs.
281
282config GPIO_MAX732X_IRQ
283 bool "Interrupt controller support for MAX732x"
284 depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
285 help
286 Say yes here to enable the max732x to be used as an interrupt
287 controller. It requires the driver to be built in the kernel.
288
289config GPIO_MC9S08DZ60
290 bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
291 depends on I2C && MACH_MX35_3DS
292 help
293 Select this to enable the MC9S08DZ60 GPIO driver
294
295config GPIO_PCA953X
296 tristate "PCA953x, PCA955x, PCA957x, TCA64xx, and MAX7310 I/O ports"
297 depends on I2C
298 help
299 Say yes here to provide access to several register-oriented
300 SMBus I/O expanders, made mostly by NXP or TI. Compatible
301 models include:
302
303 4 bits: pca9536, pca9537
304
305 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
306 pca9556, pca9557, pca9574, tca6408
307
308 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
309 tca6416
310
311config GPIO_PCA953X_IRQ
312 bool "Interrupt controller support for PCA953x"
313 depends on GPIO_PCA953X=y
314 help
315 Say yes here to enable the pca953x to be used as an interrupt
316 controller. It requires the driver to be built in the kernel.
317
318config GPIO_PCF857X
319 tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
320 depends on I2C
321 help
322 Say yes here to provide access to most "quasi-bidirectional" I2C
323 GPIO expanders used for additional digital outputs or inputs.
324 Most of these parts are from NXP, though TI is a second source for
325 some of them. Compatible models include:
326
327 8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
328 pca9670, pca9672, pca9674, pca9674a,
329 max7328, max7329
330
331 16 bits: pcf8575, pcf8575c, pca8575,
332 pca9671, pca9673, pca9675
333
334 Your board setup code will need to declare the expanders in
335 use, and assign numbers to the GPIOs they expose. Those GPIOs
336 can then be used from drivers and other kernel code, just like
337 other GPIOs, but only accessible from task contexts.
338
339 This driver provides an in-kernel interface to those GPIOs using
340 platform-neutral GPIO calls.
341
342config GPIO_RC5T583
343 bool "RICOH RC5T583 GPIO"
344 depends on MFD_RC5T583
345 help
346 Select this option to enable GPIO driver for the Ricoh RC5T583
347 chip family.
348 This driver provides the support for driving/reading the gpio pins
349 of RC5T583 device through standard gpio library.
350
351config GPIO_SX150X
352 bool "Semtech SX150x I2C GPIO expander"
353 depends on I2C=y
354 default n
355 help
356 Say yes here to provide support for Semtech SX150-series I2C
357 GPIO expanders. Compatible models include:
358
359 8 bits: sx1508q
360 16 bits: sx1509q
361
362config GPIO_STMPE
363 bool "STMPE GPIOs"
364 depends on MFD_STMPE
365 help
366 This enables support for the GPIOs found on the STMPE I/O
367 Expanders.
368
369config GPIO_STP_XWAY
370 bool "XWAY STP GPIOs"
371 depends on SOC_XWAY
372 help
373 This enables support for the Serial To Parallel (STP) unit found on
374 XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
375 that can be up to 24 bit. This peripheral is aimed at driving leds.
376 Some of the gpios/leds can be auto updated by the soc with dsl and
377 phy status.
378
379config GPIO_TC3589X
380 bool "TC3589X GPIOs"
381 depends on MFD_TC3589X
382 help
383 This enables support for the GPIOs found on the TC3589X
384 I/O Expander.
385
386config GPIO_TPS65912
387 tristate "TI TPS65912 GPIO"
388 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
389 help
390 This driver supports TPS65912 gpio chip
391
392config GPIO_TWL4030
393 tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
394 depends on TWL4030_CORE
395 help
396 Say yes here to access the GPIO signals of various multi-function
397 power management chips from Texas Instruments.
398
399config GPIO_WM831X
400 tristate "WM831x GPIOs"
401 depends on MFD_WM831X
402 help
403 Say yes here to access the GPIO signals of WM831x power management
404 chips from Wolfson Microelectronics.
405
406config GPIO_WM8350
407 tristate "WM8350 GPIOs"
408 depends on MFD_WM8350
409 help
410 Say yes here to access the GPIO signals of WM8350 power management
411 chips from Wolfson Microelectronics.
412
413config GPIO_WM8994
414 tristate "WM8994 GPIOs"
415 depends on MFD_WM8994
416 help
417 Say yes here to access the GPIO signals of WM8994 audio hub
418 CODECs from Wolfson Microelectronics.
419
420config GPIO_ADP5520
421 tristate "GPIO Support for ADP5520 PMIC"
422 depends on PMIC_ADP5520
423 help
424 This option enables support for on-chip GPIO found
425 on Analog Devices ADP5520 PMICs.
426
427config GPIO_ADP5588
428 tristate "ADP5588 I2C GPIO expander"
429 depends on I2C
430 help
431 This option enables support for 18 GPIOs found
432 on Analog Devices ADP5588 GPIO Expanders.
433
434config GPIO_ADP5588_IRQ
435 bool "Interrupt controller support for ADP5588"
436 depends on GPIO_ADP5588=y
437 help
438 Say yes here to enable the adp5588 to be used as an interrupt
439 controller. It requires the driver to be built in the kernel.
440
441comment "PCI GPIO expanders:"
442
443config GPIO_CS5535
444 tristate "AMD CS5535/CS5536 GPIO support"
445 depends on PCI && X86 && MFD_CS5535
446 help
447 The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
448 can be used for quite a number of things. The CS5535/6 is found on
449 AMD Geode and Lemote Yeeloong devices.
450
451 If unsure, say N.
452
453config GPIO_BT8XX
454 tristate "BT8XX GPIO abuser"
455 depends on PCI && VIDEO_BT848=n
456 help
457 The BT8xx frame grabber chip has 24 GPIO pins than can be abused
458 as a cheap PCI GPIO card.
459
460 This chip can be found on Miro, Hauppauge and STB TV-cards.
461
462 The card needs to be physically altered for using it as a
463 GPIO card. For more information on how to build a GPIO card
464 from a BT8xx TV card, see the documentation file at
465 Documentation/bt8xxgpio.txt
466
467 If unsure, say N.
468
469config GPIO_LANGWELL
470 bool "Intel Langwell/Penwell GPIO support"
471 depends on PCI && X86
472 select IRQ_DOMAIN
473 help
474 Say Y here to support Intel Langwell/Penwell GPIO.
475
476config GPIO_PCH
477 tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
478 depends on PCI && X86
479 select GENERIC_IRQ_CHIP
480 help
481 This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
482 which is an IOH(Input/Output Hub) for x86 embedded processor.
483 This driver can access PCH GPIO device.
484
485 This driver also can be used for LAPIS Semiconductor IOH(Input/
486 Output Hub), ML7223 and ML7831.
487 ML7223 IOH is for MP(Media Phone) use.
488 ML7831 IOH is for general purpose use.
489 ML7223/ML7831 is companion chip for Intel Atom E6xx series.
490 ML7223/ML7831 is completely compatible for Intel EG20T PCH.
491
492config GPIO_ML_IOH
493 tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
494 depends on PCI
495 select GENERIC_IRQ_CHIP
496 help
497 ML7213 is companion chip for Intel Atom E6xx series.
498 This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
499 Hub) which is for IVI(In-Vehicle Infotainment) use.
500 This driver can access the IOH's GPIO device.
501
502config GPIO_SODAVILLE
503 bool "Intel Sodaville GPIO support"
504 depends on X86 && PCI && OF
505 select GPIO_GENERIC
506 select GENERIC_IRQ_CHIP
507 help
508 Say Y here to support Intel Sodaville GPIO.
509
510config GPIO_TIMBERDALE
511 bool "Support for timberdale GPIO IP"
512 depends on MFD_TIMBERDALE && HAS_IOMEM
513 ---help---
514 Add support for the GPIO IP in the timberdale FPGA.
515
516config GPIO_RDC321X
517 tristate "RDC R-321x GPIO support"
518 depends on PCI
519 select MFD_CORE
520 select MFD_RDC321X
521 help
522 Support for the RDC R321x SoC GPIOs over southbridge
523 PCI configuration space.
524
525comment "SPI GPIO expanders:"
526
527config GPIO_MAX7301
528 tristate "Maxim MAX7301 GPIO expander"
529 depends on SPI_MASTER
530 select GPIO_MAX730X
531 help
532 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
533
534config GPIO_MCP23S08
535 tristate "Microchip MCP23xxx I/O expander"
536 depends on SPI_MASTER || I2C
537 help
538 SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
539 I/O expanders.
540 This provides a GPIO interface supporting inputs and outputs.
541
542config GPIO_MC33880
543 tristate "Freescale MC33880 high-side/low-side switch"
544 depends on SPI_MASTER
545 help
546 SPI driver for Freescale MC33880 high-side/low-side switch.
547 This provides GPIO interface supporting inputs and outputs.
548
549config GPIO_74X164
550 tristate "74x164 serial-in/parallel-out 8-bits shift register"
551 depends on SPI_MASTER
552 help
553 Platform driver for 74x164 compatible serial-in/parallel-out
554 8-outputs shift registers. This driver can be used to provide access
555 to more gpio outputs.
556
557comment "AC97 GPIO expanders:"
558
559config GPIO_UCB1400
560 bool "Philips UCB1400 GPIO"
561 depends on UCB1400_CORE
562 help
563 This enables support for the Philips UCB1400 GPIO pins.
564 The UCB1400 is an AC97 audio codec.
565
566comment "MODULbus GPIO expanders:"
567
568config GPIO_JANZ_TTL
569 tristate "Janz VMOD-TTL Digital IO Module"
570 depends on MFD_JANZ_CMODIO
571 help
572 This enables support for the Janz VMOD-TTL Digital IO module.
573 This driver provides support for driving the pins in output
574 mode only. Input mode is not supported.
575
576config GPIO_AB8500
577 bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
578 depends on AB8500_CORE && BROKEN
579 help
580 Select this to enable the AB8500 IC GPIO driver
581
582config GPIO_TPS65910
583 bool "TPS65910 GPIO"
584 depends on MFD_TPS65910
585 help
586 Select this option to enable GPIO driver for the TPS65910
587 chip family.
588
589config GPIO_MSIC
590 bool "Intel MSIC mixed signal gpio support"
591 depends on MFD_INTEL_MSIC
592 help
593 Enable support for GPIO on intel MSIC controllers found in
594 intel MID devices
595
596endif
1#
2# GPIO infrastructure and drivers
3#
4
5config ARCH_HAVE_CUSTOM_GPIO_H
6 bool
7 help
8 Selecting this config option from the architecture Kconfig allows
9 the architecture to provide a custom asm/gpio.h implementation
10 overriding the default implementations. New uses of this are
11 strongly discouraged.
12
13config ARCH_WANT_OPTIONAL_GPIOLIB
14 bool
15 help
16 Select this config option from the architecture Kconfig, if
17 it is possible to use gpiolib on the architecture, but let the
18 user decide whether to actually build it or not.
19 Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
20 not depend on GPIOs being available, but rather let the user
21 decide whether he needs it or not.
22
23config ARCH_REQUIRE_GPIOLIB
24 bool
25 select GPIOLIB
26 help
27 Platforms select gpiolib if they use this infrastructure
28 for all their GPIOs, usually starting with ones integrated
29 into SOC processors.
30 Selecting this from the architecture code will cause the gpiolib
31 code to always get built in.
32
33
34menuconfig GPIOLIB
35 bool "GPIO Support"
36 depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
37 help
38 This enables GPIO support through the generic GPIO library.
39 You only need to enable this, if you also want to enable
40 one or more of the GPIO drivers below.
41
42 If unsure, say N.
43
44if GPIOLIB
45
46config GPIO_DEVRES
47 def_bool y
48 depends on HAS_IOMEM
49
50config OF_GPIO
51 def_bool y
52 depends on OF
53
54config GPIO_ACPI
55 def_bool y
56 depends on ACPI
57
58config GPIOLIB_IRQCHIP
59 bool
60
61config DEBUG_GPIO
62 bool "Debug GPIO calls"
63 depends on DEBUG_KERNEL
64 help
65 Say Y here to add some extra checks and diagnostics to GPIO calls.
66 These checks help ensure that GPIOs have been properly initialized
67 before they are used, and that sleeping calls are not made from
68 non-sleeping contexts. They can make bitbanged serial protocols
69 slower. The diagnostics help catch the type of setup errors
70 that are most common when setting up new platforms or boards.
71
72config GPIO_SYSFS
73 bool "/sys/class/gpio/... (sysfs interface)"
74 depends on SYSFS
75 help
76 Say Y here to add a sysfs interface for GPIOs.
77
78 This is mostly useful to work around omissions in a system's
79 kernel support. Those are common in custom and semicustom
80 hardware assembled using standard kernels with a minimum of
81 custom patches. In those cases, userspace code may import
82 a given GPIO from the kernel, if no kernel driver requested it.
83
84 Kernel drivers may also request that a particular GPIO be
85 exported to userspace; this can be useful when debugging.
86
87config GPIO_GENERIC
88 tristate
89
90# put drivers in the right section, in alphabetical order
91
92config GPIO_DA9052
93 tristate "Dialog DA9052 GPIO"
94 depends on PMIC_DA9052
95 help
96 Say yes here to enable the GPIO driver for the DA9052 chip.
97
98config GPIO_DA9055
99 tristate "Dialog Semiconductor DA9055 GPIO"
100 depends on MFD_DA9055
101 help
102 Say yes here to enable the GPIO driver for the DA9055 chip.
103
104 The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
105 be controller by this driver.
106
107 If driver is built as a module it will be called gpio-da9055.
108
109config GPIO_MAX730X
110 tristate
111
112comment "Memory mapped GPIO drivers:"
113
114config GPIO_CLPS711X
115 tristate "CLPS711X GPIO support"
116 depends on ARCH_CLPS711X || COMPILE_TEST
117 select GPIO_GENERIC
118 help
119 Say yes here to support GPIO on CLPS711X SoCs.
120
121config GPIO_DAVINCI
122 bool "TI Davinci/Keystone GPIO support"
123 default y if ARCH_DAVINCI
124 depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE)
125 help
126 Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.
127
128config GPIO_GENERIC_PLATFORM
129 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
130 select GPIO_GENERIC
131 help
132 Say yes here to support basic platform_device memory-mapped GPIO controllers.
133
134config GPIO_DWAPB
135 tristate "Synopsys DesignWare APB GPIO driver"
136 select GPIO_GENERIC
137 select GENERIC_IRQ_CHIP
138 depends on OF_GPIO
139 help
140 Say Y or M here to build support for the Synopsys DesignWare APB
141 GPIO block.
142
143config GPIO_IT8761E
144 tristate "IT8761E GPIO support"
145 depends on X86 # unconditional access to IO space.
146 help
147 Say yes here to support GPIO functionality of IT8761E super I/O chip.
148
149config GPIO_EM
150 tristate "Emma Mobile GPIO"
151 depends on ARM && OF_GPIO
152 help
153 Say yes here to support GPIO on Renesas Emma Mobile SoCs.
154
155config GPIO_EP93XX
156 def_bool y
157 depends on ARCH_EP93XX
158 select GPIO_GENERIC
159
160config GPIO_ZEVIO
161 bool "LSI ZEVIO SoC memory mapped GPIOs"
162 depends on ARM && OF_GPIO
163 help
164 Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
165
166config GPIO_MM_LANTIQ
167 bool "Lantiq Memory mapped GPIOs"
168 depends on LANTIQ && SOC_XWAY
169 help
170 This enables support for memory mapped GPIOs on the External Bus Unit
171 (EBU) found on Lantiq SoCs. The gpios are output only as they are
172 created by attaching a 16bit latch to the bus.
173
174config GPIO_F7188X
175 tristate "F71882FG and F71889F GPIO support"
176 depends on X86
177 help
178 This option enables support for GPIOs found on Fintek Super-I/O
179 chips F71882FG and F71889F.
180
181 To compile this driver as a module, choose M here: the module will
182 be called f7188x-gpio.
183
184config GPIO_MOXART
185 bool "MOXART GPIO support"
186 depends on ARCH_MOXART
187 help
188 Select this option to enable GPIO driver for
189 MOXA ART SoC devices.
190
191config GPIO_MPC5200
192 def_bool y
193 depends on PPC_MPC52xx
194
195config GPIO_MPC8XXX
196 bool "MPC512x/MPC8xxx GPIO support"
197 depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
198 FSL_SOC_BOOKE || PPC_86xx
199 help
200 Say Y here if you're going to use hardware that connects to the
201 MPC512x/831x/834x/837x/8572/8610 GPIOs.
202
203config GPIO_MSM_V1
204 tristate "Qualcomm MSM GPIO v1"
205 depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
206 help
207 Say yes here to support the GPIO interface on ARM v6 based
208 Qualcomm MSM chips. Most of the pins on the MSM can be
209 selected for GPIO, and are controlled by this driver.
210
211config GPIO_MSM_V2
212 tristate "Qualcomm MSM GPIO v2"
213 depends on GPIOLIB && OF && ARCH_QCOM
214 help
215 Say yes here to support the GPIO interface on ARM v7 based
216 Qualcomm MSM chips. Most of the pins on the MSM can be
217 selected for GPIO, and are controlled by this driver.
218
219config GPIO_MVEBU
220 def_bool y
221 depends on PLAT_ORION
222 depends on OF
223 select GPIO_GENERIC
224 select GENERIC_IRQ_CHIP
225
226config GPIO_MXC
227 def_bool y
228 depends on ARCH_MXC
229 select GPIO_GENERIC
230 select GENERIC_IRQ_CHIP
231
232config GPIO_MXS
233 def_bool y
234 depends on ARCH_MXS
235 select GPIO_GENERIC
236 select GENERIC_IRQ_CHIP
237
238config GPIO_OCTEON
239 tristate "Cavium OCTEON GPIO"
240 depends on GPIOLIB && CAVIUM_OCTEON_SOC
241 default y
242 help
243 Say yes here to support the on-chip GPIO lines on the OCTEON
244 family of SOCs.
245
246config GPIO_PL061
247 bool "PrimeCell PL061 GPIO support"
248 depends on ARM_AMBA
249 select IRQ_DOMAIN
250 select GPIOLIB_IRQCHIP
251 help
252 Say yes here to support the PrimeCell PL061 GPIO device
253
254config GPIO_PXA
255 bool "PXA GPIO support"
256 depends on ARCH_PXA || ARCH_MMP
257 help
258 Say yes here to support the PXA GPIO device
259
260config GPIO_RCAR
261 tristate "Renesas R-Car GPIO"
262 depends on ARM
263 help
264 Say yes here to support GPIO on Renesas R-Car SoCs.
265
266config GPIO_SAMSUNG
267 bool
268 depends on PLAT_SAMSUNG
269 help
270 Legacy GPIO support. Use only for platforms without support for
271 pinctrl.
272
273config GPIO_SCH311X
274 tristate "SMSC SCH311x SuperI/O GPIO"
275 help
276 Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
277 SCH3116 "Super I/O" chipsets.
278
279 To compile this driver as a module, choose M here: the module will
280 be called gpio-sch311x.
281
282config GPIO_SPEAR_SPICS
283 bool "ST SPEAr13xx SPI Chip Select as GPIO support"
284 depends on PLAT_SPEAR
285 select GENERIC_IRQ_CHIP
286 help
287 Say yes here to support ST SPEAr SPI Chip Select as GPIO device
288
289config GPIO_STA2X11
290 bool "STA2x11/ConneXt GPIO support"
291 depends on MFD_STA2X11
292 select GENERIC_IRQ_CHIP
293 help
294 Say yes here to support the STA2x11/ConneXt GPIO device.
295 The GPIO module has 128 GPIO pins with alternate functions.
296
297config GPIO_SYSCON
298 tristate "GPIO based on SYSCON"
299 depends on MFD_SYSCON && OF
300 help
301 Say yes here to support GPIO functionality though SYSCON driver.
302
303config GPIO_TS5500
304 tristate "TS-5500 DIO blocks and compatibles"
305 depends on TS5500 || COMPILE_TEST
306 help
307 This driver supports Digital I/O exposed by pin blocks found on some
308 Technologic Systems platforms. It includes, but is not limited to, 3
309 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
310 LCD port.
311
312config GPIO_TZ1090
313 bool "Toumaz Xenif TZ1090 GPIO support"
314 depends on SOC_TZ1090
315 select GENERIC_IRQ_CHIP
316 default y
317 help
318 Say yes here to support Toumaz Xenif TZ1090 GPIOs.
319
320config GPIO_TZ1090_PDC
321 bool "Toumaz Xenif TZ1090 PDC GPIO support"
322 depends on SOC_TZ1090
323 default y
324 help
325 Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.
326
327config GPIO_XILINX
328 bool "Xilinx GPIO support"
329 depends on PPC_OF || MICROBLAZE || ARCH_ZYNQ
330 help
331 Say yes here to support the Xilinx FPGA GPIO device
332
333config GPIO_XTENSA
334 bool "Xtensa GPIO32 support"
335 depends on XTENSA
336 depends on HAVE_XTENSA_GPIO32
337 depends on !SMP
338 help
339 Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
340 and EXPSTATE (output) ports
341
342config GPIO_VR41XX
343 tristate "NEC VR4100 series General-purpose I/O Uint support"
344 depends on CPU_VR41XX
345 help
346 Say yes here to support the NEC VR4100 series General-purpose I/O Uint
347
348config GPIO_SCH
349 tristate "Intel SCH/TunnelCreek/Centerton GPIO"
350 depends on PCI && X86
351 select MFD_CORE
352 select LPC_SCH
353 help
354 Say yes here to support GPIO interface on Intel Poulsbo SCH,
355 Intel Tunnel Creek processor or Intel Centerton processor.
356 The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
357 powered by the core power rail and are turned off during sleep
358 modes (S3 and higher). The remaining four GPIOs are powered by
359 the Intel SCH suspend power supply. These GPIOs remain
360 active during S3. The suspend powered GPIOs can be used to wake the
361 system from the Suspend-to-RAM state.
362 The Intel Tunnel Creek processor has 5 GPIOs powered by the
363 core power rail and 9 from suspend power supply.
364 The Intel Centerton processor has a total of 30 GPIO pins.
365 Twenty-one are powered by the core power rail and 9 from the
366 suspend power supply.
367
368config GPIO_ICH
369 tristate "Intel ICH GPIO"
370 depends on PCI && X86
371 select MFD_CORE
372 select LPC_ICH
373 help
374 Say yes here to support the GPIO functionality of a number of Intel
375 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
376 ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
377 Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
378
379 If unsure, say N.
380
381config GPIO_IOP
382 tristate "Intel IOP GPIO"
383 depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
384 help
385 Say yes here to support the GPIO functionality of a number of Intel
386 IOP32X or IOP33X.
387
388 If unsure, say N.
389
390config GPIO_VX855
391 tristate "VIA VX855/VX875 GPIO"
392 depends on PCI
393 select MFD_CORE
394 select MFD_VX855
395 help
396 Support access to the VX855/VX875 GPIO lines through the gpio library.
397
398 This driver provides common support for accessing the device,
399 additional drivers must be enabled in order to use the
400 functionality of the device.
401
402config GPIO_GE_FPGA
403 bool "GE FPGA based GPIO"
404 depends on GE_FPGA
405 help
406 Support for common GPIO functionality provided on some GE Single Board
407 Computers.
408
409 This driver provides basic support (configure as input or output, read
410 and write pin state) for GPIO implemented in a number of GE single
411 board computers.
412
413config GPIO_LYNXPOINT
414 tristate "Intel Lynxpoint GPIO support"
415 depends on ACPI && X86
416 select IRQ_DOMAIN
417 help
418 driver for GPIO functionality on Intel Lynxpoint PCH chipset
419 Requires ACPI device enumeration code to set up a platform device.
420
421config GPIO_GRGPIO
422 tristate "Aeroflex Gaisler GRGPIO support"
423 depends on OF
424 select GPIO_GENERIC
425 select IRQ_DOMAIN
426 help
427 Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
428 VHDL IP core library.
429
430config GPIO_TB10X
431 bool
432 select GENERIC_IRQ_CHIP
433 select OF_GPIO
434
435comment "I2C GPIO expanders:"
436
437config GPIO_ARIZONA
438 tristate "Wolfson Microelectronics Arizona class devices"
439 depends on MFD_ARIZONA
440 help
441 Support for GPIOs on Wolfson Arizona class devices.
442
443config GPIO_LP3943
444 tristate "TI/National Semiconductor LP3943 GPIO expander"
445 depends on MFD_LP3943
446 help
447 GPIO driver for LP3943 MFD.
448 LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
449 Open drain outputs are required for this usage.
450
451config GPIO_MAX7300
452 tristate "Maxim MAX7300 GPIO expander"
453 depends on I2C
454 select GPIO_MAX730X
455 help
456 GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
457
458config GPIO_MAX732X
459 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
460 depends on I2C
461 help
462 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
463 Port Expanders. Each IO port on these chips has a fixed role of
464 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
465 Input and Output (designed by 'P'). The combinations are listed
466 below:
467
468 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
469 max7322 (4I4O), max7323 (4P4O)
470
471 16 bits: max7324 (8I8O), max7325 (8P8O),
472 max7326 (4I12O), max7327 (4P12O)
473
474 Board setup code must specify the model to use, and the start
475 number for these GPIOs.
476
477config GPIO_MAX732X_IRQ
478 bool "Interrupt controller support for MAX732x"
479 depends on GPIO_MAX732X=y
480 help
481 Say yes here to enable the max732x to be used as an interrupt
482 controller. It requires the driver to be built in the kernel.
483
484config GPIO_MC9S08DZ60
485 bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
486 depends on I2C=y && MACH_MX35_3DS
487 help
488 Select this to enable the MC9S08DZ60 GPIO driver
489
490config GPIO_PCA953X
491 tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
492 depends on I2C
493 help
494 Say yes here to provide access to several register-oriented
495 SMBus I/O expanders, made mostly by NXP or TI. Compatible
496 models include:
497
498 4 bits: pca9536, pca9537
499
500 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
501 pca9556, pca9557, pca9574, tca6408, xra1202
502
503 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
504 tca6416
505
506 24 bits: tca6424
507
508 40 bits: pca9505, pca9698
509
510config GPIO_PCA953X_IRQ
511 bool "Interrupt controller support for PCA953x"
512 depends on GPIO_PCA953X=y
513 help
514 Say yes here to enable the pca953x to be used as an interrupt
515 controller. It requires the driver to be built in the kernel.
516
517config GPIO_PCF857X
518 tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
519 depends on I2C
520 select IRQ_DOMAIN
521 help
522 Say yes here to provide access to most "quasi-bidirectional" I2C
523 GPIO expanders used for additional digital outputs or inputs.
524 Most of these parts are from NXP, though TI is a second source for
525 some of them. Compatible models include:
526
527 8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
528 pca9670, pca9672, pca9674, pca9674a,
529 max7328, max7329
530
531 16 bits: pcf8575, pcf8575c, pca8575,
532 pca9671, pca9673, pca9675
533
534 Your board setup code will need to declare the expanders in
535 use, and assign numbers to the GPIOs they expose. Those GPIOs
536 can then be used from drivers and other kernel code, just like
537 other GPIOs, but only accessible from task contexts.
538
539 This driver provides an in-kernel interface to those GPIOs using
540 platform-neutral GPIO calls.
541
542config GPIO_RC5T583
543 bool "RICOH RC5T583 GPIO"
544 depends on MFD_RC5T583
545 help
546 Select this option to enable GPIO driver for the Ricoh RC5T583
547 chip family.
548 This driver provides the support for driving/reading the gpio pins
549 of RC5T583 device through standard gpio library.
550
551config GPIO_SX150X
552 bool "Semtech SX150x I2C GPIO expander"
553 depends on I2C=y
554 default n
555 help
556 Say yes here to provide support for Semtech SX150-series I2C
557 GPIO expanders. Compatible models include:
558
559 8 bits: sx1508q
560 16 bits: sx1509q
561
562config GPIO_STMPE
563 bool "STMPE GPIOs"
564 depends on MFD_STMPE
565 help
566 This enables support for the GPIOs found on the STMPE I/O
567 Expanders.
568
569config GPIO_STP_XWAY
570 bool "XWAY STP GPIOs"
571 depends on SOC_XWAY
572 help
573 This enables support for the Serial To Parallel (STP) unit found on
574 XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
575 that can be up to 24 bit. This peripheral is aimed at driving leds.
576 Some of the gpios/leds can be auto updated by the soc with dsl and
577 phy status.
578
579config GPIO_TC3589X
580 bool "TC3589X GPIOs"
581 depends on MFD_TC3589X
582 help
583 This enables support for the GPIOs found on the TC3589X
584 I/O Expander.
585
586config GPIO_TPS65912
587 tristate "TI TPS65912 GPIO"
588 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
589 help
590 This driver supports TPS65912 gpio chip
591
592config GPIO_TWL4030
593 tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
594 depends on TWL4030_CORE
595 help
596 Say yes here to access the GPIO signals of various multi-function
597 power management chips from Texas Instruments.
598
599config GPIO_TWL6040
600 tristate "TWL6040 GPO"
601 depends on TWL6040_CORE
602 help
603 Say yes here to access the GPO signals of twl6040
604 audio chip from Texas Instruments.
605
606config GPIO_WM831X
607 tristate "WM831x GPIOs"
608 depends on MFD_WM831X
609 help
610 Say yes here to access the GPIO signals of WM831x power management
611 chips from Wolfson Microelectronics.
612
613config GPIO_WM8350
614 tristate "WM8350 GPIOs"
615 depends on MFD_WM8350
616 help
617 Say yes here to access the GPIO signals of WM8350 power management
618 chips from Wolfson Microelectronics.
619
620config GPIO_WM8994
621 tristate "WM8994 GPIOs"
622 depends on MFD_WM8994
623 help
624 Say yes here to access the GPIO signals of WM8994 audio hub
625 CODECs from Wolfson Microelectronics.
626
627config GPIO_ADP5520
628 tristate "GPIO Support for ADP5520 PMIC"
629 depends on PMIC_ADP5520
630 help
631 This option enables support for on-chip GPIO found
632 on Analog Devices ADP5520 PMICs.
633
634config GPIO_ADP5588
635 tristate "ADP5588 I2C GPIO expander"
636 depends on I2C
637 help
638 This option enables support for 18 GPIOs found
639 on Analog Devices ADP5588 GPIO Expanders.
640
641config GPIO_ADP5588_IRQ
642 bool "Interrupt controller support for ADP5588"
643 depends on GPIO_ADP5588=y
644 help
645 Say yes here to enable the adp5588 to be used as an interrupt
646 controller. It requires the driver to be built in the kernel.
647
648config GPIO_ADNP
649 tristate "Avionic Design N-bit GPIO expander"
650 depends on I2C && OF_GPIO
651 help
652 This option enables support for N GPIOs found on Avionic Design
653 I2C GPIO expanders. The register space will be extended by powers
654 of two, so the controller will need to accommodate for that. For
655 example: if a controller provides 48 pins, 6 registers will be
656 enough to represent all pins, but the driver will assume a
657 register layout for 64 pins (8 registers).
658
659comment "PCI GPIO expanders:"
660
661config GPIO_CS5535
662 tristate "AMD CS5535/CS5536 GPIO support"
663 depends on MFD_CS5535
664 help
665 The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
666 can be used for quite a number of things. The CS5535/6 is found on
667 AMD Geode and Lemote Yeeloong devices.
668
669 If unsure, say N.
670
671config GPIO_BT8XX
672 tristate "BT8XX GPIO abuser"
673 depends on PCI && VIDEO_BT848=n
674 help
675 The BT8xx frame grabber chip has 24 GPIO pins that can be abused
676 as a cheap PCI GPIO card.
677
678 This chip can be found on Miro, Hauppauge and STB TV-cards.
679
680 The card needs to be physically altered for using it as a
681 GPIO card. For more information on how to build a GPIO card
682 from a BT8xx TV card, see the documentation file at
683 Documentation/bt8xxgpio.txt
684
685 If unsure, say N.
686
687config GPIO_AMD8111
688 tristate "AMD 8111 GPIO driver"
689 depends on PCI
690 help
691 The AMD 8111 south bridge contains 32 GPIO pins which can be used.
692
693 Note, that usually system firmware/ACPI handles GPIO pins on their
694 own and users might easily break their systems with uncarefull usage
695 of this driver!
696
697 If unsure, say N
698
699config GPIO_INTEL_MID
700 bool "Intel Mid GPIO support"
701 depends on PCI && X86
702 select IRQ_DOMAIN
703 help
704 Say Y here to support Intel Mid GPIO.
705
706config GPIO_PCH
707 tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
708 depends on PCI && X86
709 select GENERIC_IRQ_CHIP
710 help
711 This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
712 which is an IOH(Input/Output Hub) for x86 embedded processor.
713 This driver can access PCH GPIO device.
714
715 This driver also can be used for LAPIS Semiconductor IOH(Input/
716 Output Hub), ML7223 and ML7831.
717 ML7223 IOH is for MP(Media Phone) use.
718 ML7831 IOH is for general purpose use.
719 ML7223/ML7831 is companion chip for Intel Atom E6xx series.
720 ML7223/ML7831 is completely compatible for Intel EG20T PCH.
721
722config GPIO_ML_IOH
723 tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
724 depends on PCI
725 select GENERIC_IRQ_CHIP
726 help
727 ML7213 is companion chip for Intel Atom E6xx series.
728 This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
729 Hub) which is for IVI(In-Vehicle Infotainment) use.
730 This driver can access the IOH's GPIO device.
731
732config GPIO_SODAVILLE
733 bool "Intel Sodaville GPIO support"
734 depends on X86 && PCI && OF
735 select GPIO_GENERIC
736 select GENERIC_IRQ_CHIP
737 help
738 Say Y here to support Intel Sodaville GPIO.
739
740config GPIO_TIMBERDALE
741 bool "Support for timberdale GPIO IP"
742 depends on MFD_TIMBERDALE && HAS_IOMEM
743 ---help---
744 Add support for the GPIO IP in the timberdale FPGA.
745
746config GPIO_RDC321X
747 tristate "RDC R-321x GPIO support"
748 depends on PCI
749 select MFD_CORE
750 select MFD_RDC321X
751 help
752 Support for the RDC R321x SoC GPIOs over southbridge
753 PCI configuration space.
754
755comment "SPI GPIO expanders:"
756
757config GPIO_MAX7301
758 tristate "Maxim MAX7301 GPIO expander"
759 depends on SPI_MASTER
760 select GPIO_MAX730X
761 help
762 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
763
764config GPIO_MCP23S08
765 tristate "Microchip MCP23xxx I/O expander"
766 depends on OF_GPIO
767 depends on (SPI_MASTER && !I2C) || I2C
768 help
769 SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
770 I/O expanders.
771 This provides a GPIO interface supporting inputs and outputs.
772 The I2C versions of the chips can be used as interrupt-controller.
773
774config GPIO_MC33880
775 tristate "Freescale MC33880 high-side/low-side switch"
776 depends on SPI_MASTER
777 help
778 SPI driver for Freescale MC33880 high-side/low-side switch.
779 This provides GPIO interface supporting inputs and outputs.
780
781config GPIO_74X164
782 tristate "74x164 serial-in/parallel-out 8-bits shift register"
783 depends on SPI_MASTER && OF
784 help
785 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
786 shift registers. This driver can be used to provide access
787 to more gpio outputs.
788
789comment "AC97 GPIO expanders:"
790
791config GPIO_UCB1400
792 tristate "Philips UCB1400 GPIO"
793 depends on UCB1400_CORE
794 help
795 This enables support for the Philips UCB1400 GPIO pins.
796 The UCB1400 is an AC97 audio codec.
797
798comment "LPC GPIO expanders:"
799
800config GPIO_KEMPLD
801 tristate "Kontron ETX / COMexpress GPIO"
802 depends on MFD_KEMPLD
803 help
804 This enables support for the PLD GPIO interface on some Kontron ETX
805 and COMexpress (ETXexpress) modules.
806
807 This driver can also be built as a module. If so, the module will be
808 called gpio-kempld.
809
810comment "MODULbus GPIO expanders:"
811
812config GPIO_JANZ_TTL
813 tristate "Janz VMOD-TTL Digital IO Module"
814 depends on MFD_JANZ_CMODIO
815 help
816 This enables support for the Janz VMOD-TTL Digital IO module.
817 This driver provides support for driving the pins in output
818 mode only. Input mode is not supported.
819
820config GPIO_PALMAS
821 bool "TI PALMAS series PMICs GPIO"
822 depends on MFD_PALMAS
823 help
824 Select this option to enable GPIO driver for the TI PALMAS
825 series chip family.
826
827config GPIO_TPS6586X
828 bool "TPS6586X GPIO"
829 depends on MFD_TPS6586X
830 help
831 Select this option to enable GPIO driver for the TPS6586X
832 chip family.
833
834config GPIO_TPS65910
835 bool "TPS65910 GPIO"
836 depends on MFD_TPS65910
837 help
838 Select this option to enable GPIO driver for the TPS65910
839 chip family.
840
841config GPIO_MSIC
842 bool "Intel MSIC mixed signal gpio support"
843 depends on MFD_INTEL_MSIC
844 help
845 Enable support for GPIO on intel MSIC controllers found in
846 intel MID devices
847
848config GPIO_BCM_KONA
849 bool "Broadcom Kona GPIO"
850 depends on OF_GPIO
851 help
852 Turn on GPIO support for Broadcom "Kona" chips.
853
854comment "USB GPIO expanders:"
855
856config GPIO_VIPERBOARD
857 tristate "Viperboard GPIO a & b support"
858 depends on MFD_VIPERBOARD && USB
859 help
860 Say yes here to access the GPIO signals of Nano River
861 Technologies Viperboard. There are two GPIO chips on the
862 board: gpioa and gpiob.
863 See viperboard API specification and Nano
864 River Tech's viperboard.h for detailed meaning
865 of the module parameters.
866
867endif