Loading...
1#
2# GPIO infrastructure and drivers
3#
4
5config ARCH_HAVE_CUSTOM_GPIO_H
6 bool
7 help
8 Selecting this config option from the architecture Kconfig allows
9 the architecture to provide a custom asm/gpio.h implementation
10 overriding the default implementations. New uses of this are
11 strongly discouraged.
12
13config ARCH_WANT_OPTIONAL_GPIOLIB
14 bool
15 help
16 Select this config option from the architecture Kconfig, if
17 it is possible to use gpiolib on the architecture, but let the
18 user decide whether to actually build it or not.
19 Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
20 not depend on GPIOs being available, but rather let the user
21 decide whether he needs it or not.
22
23config ARCH_REQUIRE_GPIOLIB
24 bool
25 select GPIOLIB
26 help
27 Platforms select gpiolib if they use this infrastructure
28 for all their GPIOs, usually starting with ones integrated
29 into SOC processors.
30 Selecting this from the architecture code will cause the gpiolib
31 code to always get built in.
32
33
34
35menuconfig GPIOLIB
36 bool "GPIO Support"
37 depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
38 select GENERIC_GPIO
39 help
40 This enables GPIO support through the generic GPIO library.
41 You only need to enable this, if you also want to enable
42 one or more of the GPIO drivers below.
43
44 If unsure, say N.
45
46if GPIOLIB
47
48config OF_GPIO
49 def_bool y
50 depends on OF && !SPARC
51
52config DEBUG_GPIO
53 bool "Debug GPIO calls"
54 depends on DEBUG_KERNEL
55 help
56 Say Y here to add some extra checks and diagnostics to GPIO calls.
57 These checks help ensure that GPIOs have been properly initialized
58 before they are used, and that sleeping calls are not made from
59 non-sleeping contexts. They can make bitbanged serial protocols
60 slower. The diagnostics help catch the type of setup errors
61 that are most common when setting up new platforms or boards.
62
63config GPIO_SYSFS
64 bool "/sys/class/gpio/... (sysfs interface)"
65 depends on SYSFS && EXPERIMENTAL
66 help
67 Say Y here to add a sysfs interface for GPIOs.
68
69 This is mostly useful to work around omissions in a system's
70 kernel support. Those are common in custom and semicustom
71 hardware assembled using standard kernels with a minimum of
72 custom patches. In those cases, userspace code may import
73 a given GPIO from the kernel, if no kernel driver requested it.
74
75 Kernel drivers may also request that a particular GPIO be
76 exported to userspace; this can be useful when debugging.
77
78config GPIO_GENERIC
79 tristate
80
81# put drivers in the right section, in alphabetical order
82
83config GPIO_DA9052
84 tristate "Dialog DA9052 GPIO"
85 depends on PMIC_DA9052 && BROKEN
86 help
87 Say yes here to enable the GPIO driver for the DA9052 chip.
88
89config GPIO_MAX730X
90 tristate
91
92comment "Memory mapped GPIO drivers:"
93
94config GPIO_GENERIC_PLATFORM
95 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
96 select GPIO_GENERIC
97 help
98 Say yes here to support basic platform_device memory-mapped GPIO controllers.
99
100config GPIO_IT8761E
101 tristate "IT8761E GPIO support"
102 depends on X86 # unconditional access to IO space.
103 help
104 Say yes here to support GPIO functionality of IT8761E super I/O chip.
105
106config GPIO_EM
107 tristate "Emma Mobile GPIO"
108 depends on ARM
109 help
110 Say yes here to support GPIO on Renesas Emma Mobile SoCs.
111
112config GPIO_EP93XX
113 def_bool y
114 depends on ARCH_EP93XX
115 select GPIO_GENERIC
116
117config GPIO_MM_LANTIQ
118 bool "Lantiq Memory mapped GPIOs"
119 depends on LANTIQ && SOC_XWAY
120 help
121 This enables support for memory mapped GPIOs on the External Bus Unit
122 (EBU) found on Lantiq SoCs. The gpios are output only as they are
123 created by attaching a 16bit latch to the bus.
124
125config GPIO_MPC5200
126 def_bool y
127 depends on PPC_MPC52xx
128
129config GPIO_MPC8XXX
130 bool "MPC512x/MPC8xxx GPIO support"
131 depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
132 FSL_SOC_BOOKE || PPC_86xx
133 help
134 Say Y here if you're going to use hardware that connects to the
135 MPC512x/831x/834x/837x/8572/8610 GPIOs.
136
137config GPIO_MSM_V1
138 tristate "Qualcomm MSM GPIO v1"
139 depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
140 help
141 Say yes here to support the GPIO interface on ARM v6 based
142 Qualcomm MSM chips. Most of the pins on the MSM can be
143 selected for GPIO, and are controlled by this driver.
144
145config GPIO_MSM_V2
146 tristate "Qualcomm MSM GPIO v2"
147 depends on GPIOLIB && ARCH_MSM
148 help
149 Say yes here to support the GPIO interface on ARM v7 based
150 Qualcomm MSM chips. Most of the pins on the MSM can be
151 selected for GPIO, and are controlled by this driver.
152
153config GPIO_MXC
154 def_bool y
155 depends on ARCH_MXC
156 select GPIO_GENERIC
157 select GENERIC_IRQ_CHIP
158
159config GPIO_MXS
160 def_bool y
161 depends on ARCH_MXS
162 select GPIO_GENERIC
163 select GENERIC_IRQ_CHIP
164
165config GPIO_PL061
166 bool "PrimeCell PL061 GPIO support"
167 depends on ARM_AMBA
168 select GENERIC_IRQ_CHIP
169 help
170 Say yes here to support the PrimeCell PL061 GPIO device
171
172config GPIO_PXA
173 bool "PXA GPIO support"
174 depends on ARCH_PXA || ARCH_MMP
175 help
176 Say yes here to support the PXA GPIO device
177
178config GPIO_STA2X11
179 bool "STA2x11/ConneXt GPIO support"
180 depends on MFD_STA2X11
181 select GENERIC_IRQ_CHIP
182 help
183 Say yes here to support the STA2x11/ConneXt GPIO device.
184 The GPIO module has 128 GPIO pins with alternate functions.
185
186config GPIO_XILINX
187 bool "Xilinx GPIO support"
188 depends on PPC_OF || MICROBLAZE
189 help
190 Say yes here to support the Xilinx FPGA GPIO device
191
192config GPIO_VR41XX
193 tristate "NEC VR4100 series General-purpose I/O Uint support"
194 depends on CPU_VR41XX
195 help
196 Say yes here to support the NEC VR4100 series General-purpose I/O Uint
197
198config GPIO_SCH
199 tristate "Intel SCH/TunnelCreek/Centerton GPIO"
200 depends on PCI && X86
201 select MFD_CORE
202 select LPC_SCH
203 help
204 Say yes here to support GPIO interface on Intel Poulsbo SCH,
205 Intel Tunnel Creek processor or Intel Centerton processor.
206 The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
207 powered by the core power rail and are turned off during sleep
208 modes (S3 and higher). The remaining four GPIOs are powered by
209 the Intel SCH suspend power supply. These GPIOs remain
210 active during S3. The suspend powered GPIOs can be used to wake the
211 system from the Suspend-to-RAM state.
212 The Intel Tunnel Creek processor has 5 GPIOs powered by the
213 core power rail and 9 from suspend power supply.
214 The Intel Centerton processor has a total of 30 GPIO pins.
215 Twenty-one are powered by the core power rail and 9 from the
216 suspend power supply.
217
218config GPIO_ICH
219 tristate "Intel ICH GPIO"
220 depends on PCI && X86
221 select MFD_CORE
222 select LPC_ICH
223 help
224 Say yes here to support the GPIO functionality of a number of Intel
225 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
226 ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
227 Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
228
229 If unsure, say N.
230
231config GPIO_VX855
232 tristate "VIA VX855/VX875 GPIO"
233 depends on PCI
234 select MFD_CORE
235 select MFD_VX855
236 help
237 Support access to the VX855/VX875 GPIO lines through the gpio library.
238
239 This driver provides common support for accessing the device,
240 additional drivers must be enabled in order to use the
241 functionality of the device.
242
243config GPIO_GE_FPGA
244 bool "GE FPGA based GPIO"
245 depends on GE_FPGA
246 help
247 Support for common GPIO functionality provided on some GE Single Board
248 Computers.
249
250 This driver provides basic support (configure as input or output, read
251 and write pin state) for GPIO implemented in a number of GE single
252 board computers.
253
254comment "I2C GPIO expanders:"
255
256config GPIO_MAX7300
257 tristate "Maxim MAX7300 GPIO expander"
258 depends on I2C
259 select GPIO_MAX730X
260 help
261 GPIO driver for Maxim MAX7301 I2C-based GPIO expander.
262
263config GPIO_MAX732X
264 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
265 depends on I2C
266 help
267 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
268 Port Expanders. Each IO port on these chips has a fixed role of
269 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
270 Input and Output (designed by 'P'). The combinations are listed
271 below:
272
273 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
274 max7322 (4I4O), max7323 (4P4O)
275
276 16 bits: max7324 (8I8O), max7325 (8P8O),
277 max7326 (4I12O), max7327 (4P12O)
278
279 Board setup code must specify the model to use, and the start
280 number for these GPIOs.
281
282config GPIO_MAX732X_IRQ
283 bool "Interrupt controller support for MAX732x"
284 depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
285 help
286 Say yes here to enable the max732x to be used as an interrupt
287 controller. It requires the driver to be built in the kernel.
288
289config GPIO_MC9S08DZ60
290 bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
291 depends on I2C && MACH_MX35_3DS
292 help
293 Select this to enable the MC9S08DZ60 GPIO driver
294
295config GPIO_PCA953X
296 tristate "PCA953x, PCA955x, PCA957x, TCA64xx, and MAX7310 I/O ports"
297 depends on I2C
298 help
299 Say yes here to provide access to several register-oriented
300 SMBus I/O expanders, made mostly by NXP or TI. Compatible
301 models include:
302
303 4 bits: pca9536, pca9537
304
305 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
306 pca9556, pca9557, pca9574, tca6408
307
308 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
309 tca6416
310
311config GPIO_PCA953X_IRQ
312 bool "Interrupt controller support for PCA953x"
313 depends on GPIO_PCA953X=y
314 help
315 Say yes here to enable the pca953x to be used as an interrupt
316 controller. It requires the driver to be built in the kernel.
317
318config GPIO_PCF857X
319 tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
320 depends on I2C
321 help
322 Say yes here to provide access to most "quasi-bidirectional" I2C
323 GPIO expanders used for additional digital outputs or inputs.
324 Most of these parts are from NXP, though TI is a second source for
325 some of them. Compatible models include:
326
327 8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
328 pca9670, pca9672, pca9674, pca9674a,
329 max7328, max7329
330
331 16 bits: pcf8575, pcf8575c, pca8575,
332 pca9671, pca9673, pca9675
333
334 Your board setup code will need to declare the expanders in
335 use, and assign numbers to the GPIOs they expose. Those GPIOs
336 can then be used from drivers and other kernel code, just like
337 other GPIOs, but only accessible from task contexts.
338
339 This driver provides an in-kernel interface to those GPIOs using
340 platform-neutral GPIO calls.
341
342config GPIO_RC5T583
343 bool "RICOH RC5T583 GPIO"
344 depends on MFD_RC5T583
345 help
346 Select this option to enable GPIO driver for the Ricoh RC5T583
347 chip family.
348 This driver provides the support for driving/reading the gpio pins
349 of RC5T583 device through standard gpio library.
350
351config GPIO_SX150X
352 bool "Semtech SX150x I2C GPIO expander"
353 depends on I2C=y
354 default n
355 help
356 Say yes here to provide support for Semtech SX150-series I2C
357 GPIO expanders. Compatible models include:
358
359 8 bits: sx1508q
360 16 bits: sx1509q
361
362config GPIO_STMPE
363 bool "STMPE GPIOs"
364 depends on MFD_STMPE
365 help
366 This enables support for the GPIOs found on the STMPE I/O
367 Expanders.
368
369config GPIO_STP_XWAY
370 bool "XWAY STP GPIOs"
371 depends on SOC_XWAY
372 help
373 This enables support for the Serial To Parallel (STP) unit found on
374 XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
375 that can be up to 24 bit. This peripheral is aimed at driving leds.
376 Some of the gpios/leds can be auto updated by the soc with dsl and
377 phy status.
378
379config GPIO_TC3589X
380 bool "TC3589X GPIOs"
381 depends on MFD_TC3589X
382 help
383 This enables support for the GPIOs found on the TC3589X
384 I/O Expander.
385
386config GPIO_TPS65912
387 tristate "TI TPS65912 GPIO"
388 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
389 help
390 This driver supports TPS65912 gpio chip
391
392config GPIO_TWL4030
393 tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
394 depends on TWL4030_CORE
395 help
396 Say yes here to access the GPIO signals of various multi-function
397 power management chips from Texas Instruments.
398
399config GPIO_WM831X
400 tristate "WM831x GPIOs"
401 depends on MFD_WM831X
402 help
403 Say yes here to access the GPIO signals of WM831x power management
404 chips from Wolfson Microelectronics.
405
406config GPIO_WM8350
407 tristate "WM8350 GPIOs"
408 depends on MFD_WM8350
409 help
410 Say yes here to access the GPIO signals of WM8350 power management
411 chips from Wolfson Microelectronics.
412
413config GPIO_WM8994
414 tristate "WM8994 GPIOs"
415 depends on MFD_WM8994
416 help
417 Say yes here to access the GPIO signals of WM8994 audio hub
418 CODECs from Wolfson Microelectronics.
419
420config GPIO_ADP5520
421 tristate "GPIO Support for ADP5520 PMIC"
422 depends on PMIC_ADP5520
423 help
424 This option enables support for on-chip GPIO found
425 on Analog Devices ADP5520 PMICs.
426
427config GPIO_ADP5588
428 tristate "ADP5588 I2C GPIO expander"
429 depends on I2C
430 help
431 This option enables support for 18 GPIOs found
432 on Analog Devices ADP5588 GPIO Expanders.
433
434config GPIO_ADP5588_IRQ
435 bool "Interrupt controller support for ADP5588"
436 depends on GPIO_ADP5588=y
437 help
438 Say yes here to enable the adp5588 to be used as an interrupt
439 controller. It requires the driver to be built in the kernel.
440
441comment "PCI GPIO expanders:"
442
443config GPIO_CS5535
444 tristate "AMD CS5535/CS5536 GPIO support"
445 depends on PCI && X86 && MFD_CS5535
446 help
447 The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
448 can be used for quite a number of things. The CS5535/6 is found on
449 AMD Geode and Lemote Yeeloong devices.
450
451 If unsure, say N.
452
453config GPIO_BT8XX
454 tristate "BT8XX GPIO abuser"
455 depends on PCI && VIDEO_BT848=n
456 help
457 The BT8xx frame grabber chip has 24 GPIO pins than can be abused
458 as a cheap PCI GPIO card.
459
460 This chip can be found on Miro, Hauppauge and STB TV-cards.
461
462 The card needs to be physically altered for using it as a
463 GPIO card. For more information on how to build a GPIO card
464 from a BT8xx TV card, see the documentation file at
465 Documentation/bt8xxgpio.txt
466
467 If unsure, say N.
468
469config GPIO_LANGWELL
470 bool "Intel Langwell/Penwell GPIO support"
471 depends on PCI && X86
472 select IRQ_DOMAIN
473 help
474 Say Y here to support Intel Langwell/Penwell GPIO.
475
476config GPIO_PCH
477 tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
478 depends on PCI && X86
479 select GENERIC_IRQ_CHIP
480 help
481 This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
482 which is an IOH(Input/Output Hub) for x86 embedded processor.
483 This driver can access PCH GPIO device.
484
485 This driver also can be used for LAPIS Semiconductor IOH(Input/
486 Output Hub), ML7223 and ML7831.
487 ML7223 IOH is for MP(Media Phone) use.
488 ML7831 IOH is for general purpose use.
489 ML7223/ML7831 is companion chip for Intel Atom E6xx series.
490 ML7223/ML7831 is completely compatible for Intel EG20T PCH.
491
492config GPIO_ML_IOH
493 tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
494 depends on PCI
495 select GENERIC_IRQ_CHIP
496 help
497 ML7213 is companion chip for Intel Atom E6xx series.
498 This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
499 Hub) which is for IVI(In-Vehicle Infotainment) use.
500 This driver can access the IOH's GPIO device.
501
502config GPIO_SODAVILLE
503 bool "Intel Sodaville GPIO support"
504 depends on X86 && PCI && OF
505 select GPIO_GENERIC
506 select GENERIC_IRQ_CHIP
507 help
508 Say Y here to support Intel Sodaville GPIO.
509
510config GPIO_TIMBERDALE
511 bool "Support for timberdale GPIO IP"
512 depends on MFD_TIMBERDALE && HAS_IOMEM
513 ---help---
514 Add support for the GPIO IP in the timberdale FPGA.
515
516config GPIO_RDC321X
517 tristate "RDC R-321x GPIO support"
518 depends on PCI
519 select MFD_CORE
520 select MFD_RDC321X
521 help
522 Support for the RDC R321x SoC GPIOs over southbridge
523 PCI configuration space.
524
525comment "SPI GPIO expanders:"
526
527config GPIO_MAX7301
528 tristate "Maxim MAX7301 GPIO expander"
529 depends on SPI_MASTER
530 select GPIO_MAX730X
531 help
532 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
533
534config GPIO_MCP23S08
535 tristate "Microchip MCP23xxx I/O expander"
536 depends on SPI_MASTER || I2C
537 help
538 SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
539 I/O expanders.
540 This provides a GPIO interface supporting inputs and outputs.
541
542config GPIO_MC33880
543 tristate "Freescale MC33880 high-side/low-side switch"
544 depends on SPI_MASTER
545 help
546 SPI driver for Freescale MC33880 high-side/low-side switch.
547 This provides GPIO interface supporting inputs and outputs.
548
549config GPIO_74X164
550 tristate "74x164 serial-in/parallel-out 8-bits shift register"
551 depends on SPI_MASTER
552 help
553 Platform driver for 74x164 compatible serial-in/parallel-out
554 8-outputs shift registers. This driver can be used to provide access
555 to more gpio outputs.
556
557comment "AC97 GPIO expanders:"
558
559config GPIO_UCB1400
560 bool "Philips UCB1400 GPIO"
561 depends on UCB1400_CORE
562 help
563 This enables support for the Philips UCB1400 GPIO pins.
564 The UCB1400 is an AC97 audio codec.
565
566comment "MODULbus GPIO expanders:"
567
568config GPIO_JANZ_TTL
569 tristate "Janz VMOD-TTL Digital IO Module"
570 depends on MFD_JANZ_CMODIO
571 help
572 This enables support for the Janz VMOD-TTL Digital IO module.
573 This driver provides support for driving the pins in output
574 mode only. Input mode is not supported.
575
576config GPIO_AB8500
577 bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
578 depends on AB8500_CORE && BROKEN
579 help
580 Select this to enable the AB8500 IC GPIO driver
581
582config GPIO_TPS65910
583 bool "TPS65910 GPIO"
584 depends on MFD_TPS65910
585 help
586 Select this option to enable GPIO driver for the TPS65910
587 chip family.
588
589config GPIO_MSIC
590 bool "Intel MSIC mixed signal gpio support"
591 depends on MFD_INTEL_MSIC
592 help
593 Enable support for GPIO on intel MSIC controllers found in
594 intel MID devices
595
596endif
1#
2# GPIO infrastructure and drivers
3#
4
5config ARCH_HAVE_CUSTOM_GPIO_H
6 bool
7 help
8 Selecting this config option from the architecture Kconfig allows
9 the architecture to provide a custom asm/gpio.h implementation
10 overriding the default implementations. New uses of this are
11 strongly discouraged.
12
13config ARCH_WANT_OPTIONAL_GPIOLIB
14 bool
15 help
16 Select this config option from the architecture Kconfig, if
17 it is possible to use gpiolib on the architecture, but let the
18 user decide whether to actually build it or not.
19 Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
20 not depend on GPIOs being available, but rather let the user
21 decide whether he needs it or not.
22
23config ARCH_REQUIRE_GPIOLIB
24 bool
25 select GPIOLIB
26 help
27 Platforms select gpiolib if they use this infrastructure
28 for all their GPIOs, usually starting with ones integrated
29 into SOC processors.
30 Selecting this from the architecture code will cause the gpiolib
31 code to always get built in.
32
33
34menuconfig GPIOLIB
35 bool "GPIO Support"
36 depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
37 help
38 This enables GPIO support through the generic GPIO library.
39 You only need to enable this, if you also want to enable
40 one or more of the GPIO drivers below.
41
42 If unsure, say N.
43
44if GPIOLIB
45
46config GPIO_DEVRES
47 def_bool y
48 depends on HAS_IOMEM
49
50config OF_GPIO
51 def_bool y
52 depends on OF
53
54config GPIO_ACPI
55 def_bool y
56 depends on ACPI
57
58config GPIOLIB_IRQCHIP
59 select IRQ_DOMAIN
60 bool
61
62config DEBUG_GPIO
63 bool "Debug GPIO calls"
64 depends on DEBUG_KERNEL
65 help
66 Say Y here to add some extra checks and diagnostics to GPIO calls.
67 These checks help ensure that GPIOs have been properly initialized
68 before they are used, and that sleeping calls are not made from
69 non-sleeping contexts. They can make bitbanged serial protocols
70 slower. The diagnostics help catch the type of setup errors
71 that are most common when setting up new platforms or boards.
72
73config GPIO_SYSFS
74 bool "/sys/class/gpio/... (sysfs interface)"
75 depends on SYSFS
76 help
77 Say Y here to add a sysfs interface for GPIOs.
78
79 This is mostly useful to work around omissions in a system's
80 kernel support. Those are common in custom and semicustom
81 hardware assembled using standard kernels with a minimum of
82 custom patches. In those cases, userspace code may import
83 a given GPIO from the kernel, if no kernel driver requested it.
84
85 Kernel drivers may also request that a particular GPIO be
86 exported to userspace; this can be useful when debugging.
87
88config GPIO_GENERIC
89 tristate
90
91# put drivers in the right section, in alphabetical order
92
93# This symbol is selected by both I2C and SPI expanders
94config GPIO_MAX730X
95 tristate
96
97menu "Memory mapped GPIO drivers"
98
99config GPIO_74XX_MMIO
100 tristate "GPIO driver for 74xx-ICs with MMIO access"
101 depends on OF_GPIO
102 select GPIO_GENERIC
103 help
104 Say yes here to support GPIO functionality for 74xx-compatible ICs
105 with MMIO access. Compatible models include:
106 1 bit: 741G125 (Input), 741G74 (Output)
107 2 bits: 742G125 (Input), 7474 (Output)
108 4 bits: 74125 (Input), 74175 (Output)
109 6 bits: 74365 (Input), 74174 (Output)
110 8 bits: 74244 (Input), 74273 (Output)
111 16 bits: 741624 (Input), 7416374 (Output)
112
113config GPIO_ALTERA
114 tristate "Altera GPIO"
115 depends on OF_GPIO
116 select GPIOLIB_IRQCHIP
117 help
118 Say Y or M here to build support for the Altera PIO device.
119
120 If driver is built as a module it will be called gpio-altera.
121
122config GPIO_AMDPT
123 tristate "AMD Promontory GPIO support"
124 depends on ACPI
125 help
126 driver for GPIO functionality on Promontory IOHub
127 Require ACPI ASL code to enumerate as a platform device.
128
129config GPIO_ATH79
130 tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
131 default y if ATH79
132 depends on ATH79 || COMPILE_TEST
133 select GPIO_GENERIC
134 select GPIOLIB_IRQCHIP
135 help
136 Select this option to enable GPIO driver for
137 Atheros AR71XX/AR724X/AR913X SoC devices.
138
139config GPIO_BCM_KONA
140 bool "Broadcom Kona GPIO"
141 depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
142 help
143 Turn on GPIO support for Broadcom "Kona" chips.
144
145config GPIO_BRCMSTB
146 tristate "BRCMSTB GPIO support"
147 default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
148 depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST)
149 select GPIO_GENERIC
150 select GPIOLIB_IRQCHIP
151 help
152 Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
153
154config GPIO_CLPS711X
155 tristate "CLPS711X GPIO support"
156 depends on ARCH_CLPS711X || COMPILE_TEST
157 select GPIO_GENERIC
158 help
159 Say yes here to support GPIO on CLPS711X SoCs.
160
161config GPIO_DAVINCI
162 bool "TI Davinci/Keystone GPIO support"
163 default y if ARCH_DAVINCI
164 depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE)
165 help
166 Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.
167
168config GPIO_DWAPB
169 tristate "Synopsys DesignWare APB GPIO driver"
170 select GPIO_GENERIC
171 select GENERIC_IRQ_CHIP
172 help
173 Say Y or M here to build support for the Synopsys DesignWare APB
174 GPIO block.
175
176config GPIO_EM
177 tristate "Emma Mobile GPIO"
178 depends on ARM && OF_GPIO
179 help
180 Say yes here to support GPIO on Renesas Emma Mobile SoCs.
181
182config GPIO_EP93XX
183 def_bool y
184 depends on ARCH_EP93XX
185 select GPIO_GENERIC
186
187config GPIO_ETRAXFS
188 bool "Axis ETRAX FS General I/O"
189 depends on CRIS || COMPILE_TEST
190 depends on OF
191 select GPIO_GENERIC
192 select GPIOLIB_IRQCHIP
193 help
194 Say yes here to support the GPIO controller on Axis ETRAX FS SoCs.
195
196config GPIO_GE_FPGA
197 bool "GE FPGA based GPIO"
198 depends on GE_FPGA
199 select GPIO_GENERIC
200 help
201 Support for common GPIO functionality provided on some GE Single Board
202 Computers.
203
204 This driver provides basic support (configure as input or output, read
205 and write pin state) for GPIO implemented in a number of GE single
206 board computers.
207
208config GPIO_GENERIC_PLATFORM
209 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
210 select GPIO_GENERIC
211 help
212 Say yes here to support basic platform_device memory-mapped GPIO controllers.
213
214config GPIO_GRGPIO
215 tristate "Aeroflex Gaisler GRGPIO support"
216 depends on OF
217 select GPIO_GENERIC
218 select IRQ_DOMAIN
219 help
220 Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
221 VHDL IP core library.
222
223config GPIO_ICH
224 tristate "Intel ICH GPIO"
225 depends on PCI && X86
226 select MFD_CORE
227 select LPC_ICH
228 help
229 Say yes here to support the GPIO functionality of a number of Intel
230 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
231 ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
232 Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
233
234 If unsure, say N.
235
236config GPIO_IOP
237 tristate "Intel IOP GPIO"
238 depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
239 help
240 Say yes here to support the GPIO functionality of a number of Intel
241 IOP32X or IOP33X.
242
243 If unsure, say N.
244
245config GPIO_LOONGSON
246 bool "Loongson-2/3 GPIO support"
247 depends on CPU_LOONGSON2 || CPU_LOONGSON3
248 help
249 driver for GPIO functionality on Loongson-2F/3A/3B processors.
250
251config GPIO_LPC18XX
252 bool "NXP LPC18XX/43XX GPIO support"
253 default y if ARCH_LPC18XX
254 depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST)
255 help
256 Select this option to enable GPIO driver for
257 NXP LPC18XX/43XX devices.
258
259config GPIO_LYNXPOINT
260 tristate "Intel Lynxpoint GPIO support"
261 depends on ACPI && X86
262 select GPIOLIB_IRQCHIP
263 help
264 driver for GPIO functionality on Intel Lynxpoint PCH chipset
265 Requires ACPI device enumeration code to set up a platform device.
266
267config GPIO_MB86S7X
268 bool "GPIO support for Fujitsu MB86S7x Platforms"
269 depends on ARCH_MB86S7X || COMPILE_TEST
270 help
271 Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
272
273config GPIO_MENZ127
274 tristate "MEN 16Z127 GPIO support"
275 depends on MCB
276 select GPIO_GENERIC
277 help
278 Say yes here to support the MEN 16Z127 GPIO Controller
279
280config GPIO_MM_LANTIQ
281 bool "Lantiq Memory mapped GPIOs"
282 depends on LANTIQ && SOC_XWAY
283 help
284 This enables support for memory mapped GPIOs on the External Bus Unit
285 (EBU) found on Lantiq SoCs. The gpios are output only as they are
286 created by attaching a 16bit latch to the bus.
287
288config GPIO_MOXART
289 bool "MOXART GPIO support"
290 depends on ARCH_MOXART || COMPILE_TEST
291 select GPIO_GENERIC
292 help
293 Select this option to enable GPIO driver for
294 MOXA ART SoC devices.
295
296config GPIO_MPC5200
297 def_bool y
298 depends on PPC_MPC52xx
299
300config GPIO_MPC8XXX
301 bool "MPC512x/MPC8xxx/QorIQ GPIO support"
302 depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
303 FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \
304 COMPILE_TEST
305 select GPIO_GENERIC
306 help
307 Say Y here if you're going to use hardware that connects to the
308 MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
309
310config GPIO_MVEBU
311 def_bool y
312 depends on PLAT_ORION
313 depends on OF
314 select GENERIC_IRQ_CHIP
315
316config GPIO_MXC
317 def_bool y
318 depends on ARCH_MXC
319 select GPIO_GENERIC
320 select GENERIC_IRQ_CHIP
321
322config GPIO_MXS
323 def_bool y
324 depends on ARCH_MXS
325 select GPIO_GENERIC
326 select GENERIC_IRQ_CHIP
327
328config GPIO_OCTEON
329 tristate "Cavium OCTEON GPIO"
330 depends on GPIOLIB && CAVIUM_OCTEON_SOC
331 default y
332 help
333 Say yes here to support the on-chip GPIO lines on the OCTEON
334 family of SOCs.
335
336config GPIO_OMAP
337 tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST
338 default y if ARCH_OMAP
339 depends on ARM
340 select GENERIC_IRQ_CHIP
341 select GPIOLIB_IRQCHIP
342 help
343 Say yes here to enable GPIO support for TI OMAP SoCs.
344
345config GPIO_PL061
346 bool "PrimeCell PL061 GPIO support"
347 depends on ARM_AMBA
348 select IRQ_DOMAIN
349 select GPIOLIB_IRQCHIP
350 help
351 Say yes here to support the PrimeCell PL061 GPIO device
352
353config GPIO_PXA
354 bool "PXA GPIO support"
355 depends on ARCH_PXA || ARCH_MMP
356 help
357 Say yes here to support the PXA GPIO device
358
359config GPIO_RCAR
360 tristate "Renesas R-Car GPIO"
361 depends on ARCH_RENESAS || COMPILE_TEST
362 select GPIOLIB_IRQCHIP
363 help
364 Say yes here to support GPIO on Renesas R-Car SoCs.
365
366config GPIO_SPEAR_SPICS
367 bool "ST SPEAr13xx SPI Chip Select as GPIO support"
368 depends on PLAT_SPEAR
369 select GENERIC_IRQ_CHIP
370 help
371 Say yes here to support ST SPEAr SPI Chip Select as GPIO device
372
373config GPIO_STA2X11
374 bool "STA2x11/ConneXt GPIO support"
375 depends on MFD_STA2X11
376 select GENERIC_IRQ_CHIP
377 help
378 Say yes here to support the STA2x11/ConneXt GPIO device.
379 The GPIO module has 128 GPIO pins with alternate functions.
380
381config GPIO_STP_XWAY
382 bool "XWAY STP GPIOs"
383 depends on SOC_XWAY
384 help
385 This enables support for the Serial To Parallel (STP) unit found on
386 XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
387 that can be up to 24 bit. This peripheral is aimed at driving leds.
388 Some of the gpios/leds can be auto updated by the soc with dsl and
389 phy status.
390
391config GPIO_SYSCON
392 tristate "GPIO based on SYSCON"
393 depends on MFD_SYSCON && OF
394 help
395 Say yes here to support GPIO functionality though SYSCON driver.
396
397config GPIO_TB10X
398 bool
399 select GENERIC_IRQ_CHIP
400 select OF_GPIO
401
402config GPIO_TS4800
403 tristate "TS-4800 DIO blocks and compatibles"
404 depends on OF_GPIO
405 depends on SOC_IMX51 || COMPILE_TEST
406 select GPIO_GENERIC
407 help
408 This driver support TS-4800 FPGA GPIO controllers.
409
410config GPIO_TZ1090
411 bool "Toumaz Xenif TZ1090 GPIO support"
412 depends on SOC_TZ1090
413 select GENERIC_IRQ_CHIP
414 default y
415 help
416 Say yes here to support Toumaz Xenif TZ1090 GPIOs.
417
418config GPIO_TZ1090_PDC
419 bool "Toumaz Xenif TZ1090 PDC GPIO support"
420 depends on SOC_TZ1090
421 default y
422 help
423 Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.
424
425config GPIO_VF610
426 def_bool y
427 depends on ARCH_MXC && SOC_VF610
428 select GPIOLIB_IRQCHIP
429 help
430 Say yes here to support Vybrid vf610 GPIOs.
431
432config GPIO_VR41XX
433 tristate "NEC VR4100 series General-purpose I/O Uint support"
434 depends on CPU_VR41XX
435 help
436 Say yes here to support the NEC VR4100 series General-purpose I/O Uint
437
438config GPIO_VX855
439 tristate "VIA VX855/VX875 GPIO"
440 depends on PCI
441 select MFD_CORE
442 select MFD_VX855
443 help
444 Support access to the VX855/VX875 GPIO lines through the gpio library.
445
446 This driver provides common support for accessing the device,
447 additional drivers must be enabled in order to use the
448 functionality of the device.
449
450config GPIO_XGENE
451 bool "APM X-Gene GPIO controller support"
452 depends on ARM64 && OF_GPIO
453 help
454 This driver is to support the GPIO block within the APM X-Gene SoC
455 platform's generic flash controller. The GPIO pins are muxed with
456 the generic flash controller's address and data pins. Say yes
457 here to enable the GFC GPIO functionality.
458
459config GPIO_XGENE_SB
460 tristate "APM X-Gene GPIO standby controller support"
461 depends on ARCH_XGENE && OF_GPIO
462 select GPIO_GENERIC
463 select GPIOLIB_IRQCHIP
464 help
465 This driver supports the GPIO block within the APM X-Gene
466 Standby Domain. Say yes here to enable the GPIO functionality.
467
468config GPIO_XILINX
469 tristate "Xilinx GPIO support"
470 depends on OF_GPIO
471 help
472 Say yes here to support the Xilinx FPGA GPIO device
473
474config GPIO_XLP
475 tristate "Netlogic XLP GPIO support"
476 depends on CPU_XLP && OF_GPIO
477 select GPIOLIB_IRQCHIP
478 help
479 This driver provides support for GPIO interface on Netlogic XLP MIPS64
480 SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX,
481 XLP9XX and XLP5XX.
482
483 If unsure, say N.
484
485config GPIO_XTENSA
486 bool "Xtensa GPIO32 support"
487 depends on XTENSA
488 depends on HAVE_XTENSA_GPIO32
489 depends on !SMP
490 help
491 Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
492 and EXPSTATE (output) ports
493
494config GPIO_ZEVIO
495 bool "LSI ZEVIO SoC memory mapped GPIOs"
496 depends on ARM && OF_GPIO
497 help
498 Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
499
500config GPIO_ZYNQ
501 tristate "Xilinx Zynq GPIO support"
502 depends on ARCH_ZYNQ || ARCH_ZYNQMP
503 select GPIOLIB_IRQCHIP
504 help
505 Say yes here to support Xilinx Zynq GPIO controller.
506
507config GPIO_ZX
508 bool "ZTE ZX GPIO support"
509 select GPIOLIB_IRQCHIP
510 help
511 Say yes here to support the GPIO device on ZTE ZX SoCs.
512
513endmenu
514
515menu "Port-mapped I/O GPIO drivers"
516 depends on X86 # Unconditional I/O space access
517
518config GPIO_104_DIO_48E
519 tristate "ACCES 104-DIO-48E GPIO support"
520 select GPIOLIB_IRQCHIP
521 help
522 Enables GPIO support for the ACCES 104-DIO-48E family. The base port
523 address for the device may be configured via the dio_48e_base module
524 parameter. The interrupt line number for the device may be configured
525 via the dio_48e_irq module parameter.
526
527config GPIO_104_IDIO_16
528 tristate "ACCES 104-IDIO-16 GPIO support"
529 select GPIOLIB_IRQCHIP
530 help
531 Enables GPIO support for the ACCES 104-IDIO-16 family. The base port
532 address for the device may be set via the idio_16_base module
533 parameter. The interrupt line number for the device may be set via the
534 idio_16_irq module parameter.
535
536config GPIO_104_IDI_48
537 tristate "ACCES 104-IDI-48 GPIO support"
538 select GPIOLIB_IRQCHIP
539 help
540 Enables GPIO support for the ACCES 104-IDI-48 family. The base port
541 address for the device may be configured via the idi_48_base module
542 parameter. The interrupt line number for the device may be configured
543 via the idi_48_irq module parameter.
544
545config GPIO_F7188X
546 tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support"
547 help
548 This option enables support for GPIOs found on Fintek Super-I/O
549 chips F71869, F71869A, F71882FG, F71889F and F81866.
550
551 To compile this driver as a module, choose M here: the module will
552 be called f7188x-gpio.
553
554config GPIO_IT87
555 tristate "IT87xx GPIO support"
556 help
557 Say yes here to support GPIO functionality of IT87xx Super I/O chips.
558
559 This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
560 supports the IT8761E Super I/O chip as well.
561
562 To compile this driver as a module, choose M here: the module will
563 be called gpio_it87
564
565config GPIO_SCH
566 tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
567 depends on PCI
568 select MFD_CORE
569 select LPC_SCH
570 help
571 Say yes here to support GPIO interface on Intel Poulsbo SCH,
572 Intel Tunnel Creek processor, Intel Centerton processor or
573 Intel Quark X1000 SoC.
574
575 The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
576 powered by the core power rail and are turned off during sleep
577 modes (S3 and higher). The remaining four GPIOs are powered by
578 the Intel SCH suspend power supply. These GPIOs remain
579 active during S3. The suspend powered GPIOs can be used to wake the
580 system from the Suspend-to-RAM state.
581
582 The Intel Tunnel Creek processor has 5 GPIOs powered by the
583 core power rail and 9 from suspend power supply.
584
585 The Intel Centerton processor has a total of 30 GPIO pins.
586 Twenty-one are powered by the core power rail and 9 from the
587 suspend power supply.
588
589 The Intel Quark X1000 SoC has 2 GPIOs powered by the core
590 power well and 6 from the suspend power well.
591
592config GPIO_SCH311X
593 tristate "SMSC SCH311x SuperI/O GPIO"
594 help
595 Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
596 SCH3116 "Super I/O" chipsets.
597
598 To compile this driver as a module, choose M here: the module will
599 be called gpio-sch311x.
600
601config GPIO_TS5500
602 tristate "TS-5500 DIO blocks and compatibles"
603 depends on TS5500 || COMPILE_TEST
604 help
605 This driver supports Digital I/O exposed by pin blocks found on some
606 Technologic Systems platforms. It includes, but is not limited to, 3
607 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
608 LCD port.
609
610config GPIO_WS16C48
611 tristate "WinSystems WS16C48 GPIO support"
612 select GPIOLIB_IRQCHIP
613 help
614 Enables GPIO support for the WinSystems WS16C48. The base port address
615 for the device may be configured via the ws16c48_base module
616 parameter. The interrupt line number for the device may be configured
617 via the ws16c48_irq module parameter.
618
619endmenu
620
621menu "I2C GPIO expanders"
622 depends on I2C
623
624config GPIO_ADP5588
625 tristate "ADP5588 I2C GPIO expander"
626 help
627 This option enables support for 18 GPIOs found
628 on Analog Devices ADP5588 GPIO Expanders.
629
630config GPIO_ADP5588_IRQ
631 bool "Interrupt controller support for ADP5588"
632 depends on GPIO_ADP5588=y
633 help
634 Say yes here to enable the adp5588 to be used as an interrupt
635 controller. It requires the driver to be built in the kernel.
636
637config GPIO_ADNP
638 tristate "Avionic Design N-bit GPIO expander"
639 depends on OF_GPIO
640 select GPIOLIB_IRQCHIP
641 help
642 This option enables support for N GPIOs found on Avionic Design
643 I2C GPIO expanders. The register space will be extended by powers
644 of two, so the controller will need to accommodate for that. For
645 example: if a controller provides 48 pins, 6 registers will be
646 enough to represent all pins, but the driver will assume a
647 register layout for 64 pins (8 registers).
648
649config GPIO_MAX7300
650 tristate "Maxim MAX7300 GPIO expander"
651 select GPIO_MAX730X
652 help
653 GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
654
655config GPIO_MAX732X
656 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
657 help
658 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
659 Port Expanders. Each IO port on these chips has a fixed role of
660 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
661 Input and Output (designed by 'P'). The combinations are listed
662 below:
663
664 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
665 max7322 (4I4O), max7323 (4P4O)
666
667 16 bits: max7324 (8I8O), max7325 (8P8O),
668 max7326 (4I12O), max7327 (4P12O)
669
670 Board setup code must specify the model to use, and the start
671 number for these GPIOs.
672
673config GPIO_MAX732X_IRQ
674 bool "Interrupt controller support for MAX732x"
675 depends on GPIO_MAX732X=y
676 select GPIOLIB_IRQCHIP
677 help
678 Say yes here to enable the max732x to be used as an interrupt
679 controller. It requires the driver to be built in the kernel.
680
681config GPIO_MC9S08DZ60
682 bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
683 depends on I2C=y && MACH_MX35_3DS
684 help
685 Select this to enable the MC9S08DZ60 GPIO driver
686
687config GPIO_PCA953X
688 tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
689 help
690 Say yes here to provide access to several register-oriented
691 SMBus I/O expanders, made mostly by NXP or TI. Compatible
692 models include:
693
694 4 bits: pca9536, pca9537
695
696 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
697 pca9556, pca9557, pca9574, tca6408, xra1202
698
699 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
700 tca6416
701
702 24 bits: tca6424
703
704 40 bits: pca9505, pca9698
705
706config GPIO_PCA953X_IRQ
707 bool "Interrupt controller support for PCA953x"
708 depends on GPIO_PCA953X=y
709 select GPIOLIB_IRQCHIP
710 help
711 Say yes here to enable the pca953x to be used as an interrupt
712 controller. It requires the driver to be built in the kernel.
713
714config GPIO_PCF857X
715 tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
716 select GPIOLIB_IRQCHIP
717 select IRQ_DOMAIN
718 help
719 Say yes here to provide access to most "quasi-bidirectional" I2C
720 GPIO expanders used for additional digital outputs or inputs.
721 Most of these parts are from NXP, though TI is a second source for
722 some of them. Compatible models include:
723
724 8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
725 pca9670, pca9672, pca9674, pca9674a,
726 max7328, max7329
727
728 16 bits: pcf8575, pcf8575c, pca8575,
729 pca9671, pca9673, pca9675
730
731 Your board setup code will need to declare the expanders in
732 use, and assign numbers to the GPIOs they expose. Those GPIOs
733 can then be used from drivers and other kernel code, just like
734 other GPIOs, but only accessible from task contexts.
735
736 This driver provides an in-kernel interface to those GPIOs using
737 platform-neutral GPIO calls.
738
739config GPIO_SX150X
740 bool "Semtech SX150x I2C GPIO expander"
741 depends on I2C=y
742 select GPIOLIB_IRQCHIP
743 default n
744 help
745 Say yes here to provide support for Semtech SX150-series I2C
746 GPIO expanders. Compatible models include:
747
748 8 bits: sx1508q
749 16 bits: sx1509q
750
751config GPIO_TPIC2810
752 tristate "TPIC2810 8-Bit I2C GPO expander"
753 help
754 Say yes here to enable the GPO driver for the TI TPIC2810 chip.
755
756 To compile this driver as a module, choose M here: the module will
757 be called gpio-tpic2810.
758
759endmenu
760
761menu "MFD GPIO expanders"
762
763config GPIO_ADP5520
764 tristate "GPIO Support for ADP5520 PMIC"
765 depends on PMIC_ADP5520
766 help
767 This option enables support for on-chip GPIO found
768 on Analog Devices ADP5520 PMICs.
769
770config GPIO_ARIZONA
771 tristate "Wolfson Microelectronics Arizona class devices"
772 depends on MFD_ARIZONA
773 help
774 Support for GPIOs on Wolfson Arizona class devices.
775
776config GPIO_CRYSTAL_COVE
777 tristate "GPIO support for Crystal Cove PMIC"
778 depends on INTEL_SOC_PMIC
779 select GPIOLIB_IRQCHIP
780 help
781 Support for GPIO pins on Crystal Cove PMIC.
782
783 Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
784 inside.
785
786 This driver can also be built as a module. If so, the module will be
787 called gpio-crystalcove.
788
789config GPIO_CS5535
790 tristate "AMD CS5535/CS5536 GPIO support"
791 depends on MFD_CS5535
792 help
793 The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
794 can be used for quite a number of things. The CS5535/6 is found on
795 AMD Geode and Lemote Yeeloong devices.
796
797 If unsure, say N.
798
799config GPIO_DA9052
800 tristate "Dialog DA9052 GPIO"
801 depends on PMIC_DA9052
802 help
803 Say yes here to enable the GPIO driver for the DA9052 chip.
804
805config GPIO_DA9055
806 tristate "Dialog Semiconductor DA9055 GPIO"
807 depends on MFD_DA9055
808 help
809 Say yes here to enable the GPIO driver for the DA9055 chip.
810
811 The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
812 be controller by this driver.
813
814 If driver is built as a module it will be called gpio-da9055.
815
816config GPIO_DLN2
817 tristate "Diolan DLN2 GPIO support"
818 depends on MFD_DLN2
819 select GPIOLIB_IRQCHIP
820
821 help
822 Select this option to enable GPIO driver for the Diolan DLN2
823 board.
824
825 This driver can also be built as a module. If so, the module
826 will be called gpio-dln2.
827
828config GPIO_JANZ_TTL
829 tristate "Janz VMOD-TTL Digital IO Module"
830 depends on MFD_JANZ_CMODIO
831 help
832 This enables support for the Janz VMOD-TTL Digital IO module.
833 This driver provides support for driving the pins in output
834 mode only. Input mode is not supported.
835
836config GPIO_KEMPLD
837 tristate "Kontron ETX / COMexpress GPIO"
838 depends on MFD_KEMPLD
839 help
840 This enables support for the PLD GPIO interface on some Kontron ETX
841 and COMexpress (ETXexpress) modules.
842
843 This driver can also be built as a module. If so, the module will be
844 called gpio-kempld.
845
846config GPIO_LP3943
847 tristate "TI/National Semiconductor LP3943 GPIO expander"
848 depends on MFD_LP3943
849 help
850 GPIO driver for LP3943 MFD.
851 LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
852 Open drain outputs are required for this usage.
853
854config GPIO_MSIC
855 bool "Intel MSIC mixed signal gpio support"
856 depends on MFD_INTEL_MSIC
857 help
858 Enable support for GPIO on intel MSIC controllers found in
859 intel MID devices
860
861config GPIO_PALMAS
862 bool "TI PALMAS series PMICs GPIO"
863 depends on MFD_PALMAS
864 help
865 Select this option to enable GPIO driver for the TI PALMAS
866 series chip family.
867
868config GPIO_RC5T583
869 bool "RICOH RC5T583 GPIO"
870 depends on MFD_RC5T583
871 help
872 Select this option to enable GPIO driver for the Ricoh RC5T583
873 chip family.
874 This driver provides the support for driving/reading the gpio pins
875 of RC5T583 device through standard gpio library.
876
877config GPIO_STMPE
878 bool "STMPE GPIOs"
879 depends on MFD_STMPE
880 depends on OF_GPIO
881 select GPIOLIB_IRQCHIP
882 help
883 This enables support for the GPIOs found on the STMPE I/O
884 Expanders.
885
886config GPIO_TC3589X
887 bool "TC3589X GPIOs"
888 depends on MFD_TC3589X
889 depends on OF_GPIO
890 select GPIOLIB_IRQCHIP
891 help
892 This enables support for the GPIOs found on the TC3589X
893 I/O Expander.
894
895config GPIO_TIMBERDALE
896 bool "Support for timberdale GPIO IP"
897 depends on MFD_TIMBERDALE
898 ---help---
899 Add support for the GPIO IP in the timberdale FPGA.
900
901config GPIO_TPS65086
902 tristate "TI TPS65086 GPO"
903 depends on MFD_TPS65086
904 help
905 This driver supports the GPO on TI TPS65086x PMICs.
906
907config GPIO_TPS65218
908 tristate "TPS65218 GPIO"
909 depends on MFD_TPS65218
910 help
911 Select this option to enable GPIO driver for the TPS65218
912 chip family.
913
914config GPIO_TPS6586X
915 bool "TPS6586X GPIO"
916 depends on MFD_TPS6586X
917 help
918 Select this option to enable GPIO driver for the TPS6586X
919 chip family.
920
921config GPIO_TPS65910
922 bool "TPS65910 GPIO"
923 depends on MFD_TPS65910
924 help
925 Select this option to enable GPIO driver for the TPS65910
926 chip family.
927
928config GPIO_TPS65912
929 tristate "TI TPS65912 GPIO"
930 depends on MFD_TPS65912
931 help
932 This driver supports TPS65912 gpio chip
933
934config GPIO_TWL4030
935 tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
936 depends on TWL4030_CORE
937 help
938 Say yes here to access the GPIO signals of various multi-function
939 power management chips from Texas Instruments.
940
941config GPIO_TWL6040
942 tristate "TWL6040 GPO"
943 depends on TWL6040_CORE
944 help
945 Say yes here to access the GPO signals of twl6040
946 audio chip from Texas Instruments.
947
948config GPIO_UCB1400
949 tristate "Philips UCB1400 GPIO"
950 depends on UCB1400_CORE
951 help
952 This enables support for the Philips UCB1400 GPIO pins.
953 The UCB1400 is an AC97 audio codec.
954
955config GPIO_WM831X
956 tristate "WM831x GPIOs"
957 depends on MFD_WM831X
958 help
959 Say yes here to access the GPIO signals of WM831x power management
960 chips from Wolfson Microelectronics.
961
962config GPIO_WM8350
963 tristate "WM8350 GPIOs"
964 depends on MFD_WM8350
965 help
966 Say yes here to access the GPIO signals of WM8350 power management
967 chips from Wolfson Microelectronics.
968
969config GPIO_WM8994
970 tristate "WM8994 GPIOs"
971 depends on MFD_WM8994
972 help
973 Say yes here to access the GPIO signals of WM8994 audio hub
974 CODECs from Wolfson Microelectronics.
975
976endmenu
977
978menu "PCI GPIO expanders"
979 depends on PCI
980
981config GPIO_AMD8111
982 tristate "AMD 8111 GPIO driver"
983 help
984 The AMD 8111 south bridge contains 32 GPIO pins which can be used.
985
986 Note, that usually system firmware/ACPI handles GPIO pins on their
987 own and users might easily break their systems with uncarefull usage
988 of this driver!
989
990 If unsure, say N
991
992config GPIO_BT8XX
993 tristate "BT8XX GPIO abuser"
994 depends on VIDEO_BT848=n
995 help
996 The BT8xx frame grabber chip has 24 GPIO pins that can be abused
997 as a cheap PCI GPIO card.
998
999 This chip can be found on Miro, Hauppauge and STB TV-cards.
1000
1001 The card needs to be physically altered for using it as a
1002 GPIO card. For more information on how to build a GPIO card
1003 from a BT8xx TV card, see the documentation file at
1004 Documentation/bt8xxgpio.txt
1005
1006 If unsure, say N.
1007
1008config GPIO_INTEL_MID
1009 bool "Intel Mid GPIO support"
1010 depends on X86
1011 select GPIOLIB_IRQCHIP
1012 help
1013 Say Y here to support Intel Mid GPIO.
1014
1015config GPIO_ML_IOH
1016 tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
1017 select GENERIC_IRQ_CHIP
1018 help
1019 ML7213 is companion chip for Intel Atom E6xx series.
1020 This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
1021 Hub) which is for IVI(In-Vehicle Infotainment) use.
1022 This driver can access the IOH's GPIO device.
1023
1024config GPIO_PCH
1025 tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
1026 depends on X86_32 || MIPS || COMPILE_TEST
1027 select GENERIC_IRQ_CHIP
1028 help
1029 This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
1030 which is an IOH(Input/Output Hub) for x86 embedded processor.
1031 This driver can access PCH GPIO device.
1032
1033 This driver also can be used for LAPIS Semiconductor IOH(Input/
1034 Output Hub), ML7223 and ML7831.
1035 ML7223 IOH is for MP(Media Phone) use.
1036 ML7831 IOH is for general purpose use.
1037 ML7223/ML7831 is companion chip for Intel Atom E6xx series.
1038 ML7223/ML7831 is completely compatible for Intel EG20T PCH.
1039
1040config GPIO_RDC321X
1041 tristate "RDC R-321x GPIO support"
1042 select MFD_CORE
1043 select MFD_RDC321X
1044 help
1045 Support for the RDC R321x SoC GPIOs over southbridge
1046 PCI configuration space.
1047
1048config GPIO_SODAVILLE
1049 bool "Intel Sodaville GPIO support"
1050 depends on X86 && OF
1051 select GPIO_GENERIC
1052 select GENERIC_IRQ_CHIP
1053 help
1054 Say Y here to support Intel Sodaville GPIO.
1055
1056endmenu
1057
1058menu "SPI GPIO expanders"
1059 depends on SPI_MASTER
1060
1061config GPIO_74X164
1062 tristate "74x164 serial-in/parallel-out 8-bits shift register"
1063 depends on OF
1064 help
1065 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
1066 shift registers. This driver can be used to provide access
1067 to more gpio outputs.
1068
1069config GPIO_MAX7301
1070 tristate "Maxim MAX7301 GPIO expander"
1071 select GPIO_MAX730X
1072 help
1073 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
1074
1075config GPIO_MC33880
1076 tristate "Freescale MC33880 high-side/low-side switch"
1077 help
1078 SPI driver for Freescale MC33880 high-side/low-side switch.
1079 This provides GPIO interface supporting inputs and outputs.
1080
1081config GPIO_PISOSR
1082 tristate "Generic parallel-in/serial-out shift register"
1083 help
1084 GPIO driver for SPI compatible parallel-in/serial-out shift
1085 registers. These are input only devices.
1086
1087endmenu
1088
1089menu "SPI or I2C GPIO expanders"
1090 depends on (SPI_MASTER && !I2C) || I2C
1091
1092config GPIO_MCP23S08
1093 tristate "Microchip MCP23xxx I/O expander"
1094 help
1095 SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
1096 I/O expanders.
1097 This provides a GPIO interface supporting inputs and outputs.
1098 The I2C versions of the chips can be used as interrupt-controller.
1099
1100endmenu
1101
1102menu "USB GPIO expanders"
1103 depends on USB
1104
1105config GPIO_VIPERBOARD
1106 tristate "Viperboard GPIO a & b support"
1107 depends on MFD_VIPERBOARD
1108 help
1109 Say yes here to access the GPIO signals of Nano River
1110 Technologies Viperboard. There are two GPIO chips on the
1111 board: gpioa and gpiob.
1112 See viperboard API specification and Nano
1113 River Tech's viperboard.h for detailed meaning
1114 of the module parameters.
1115
1116endmenu
1117
1118endif