Loading...
1/*******************************************************************************
2 *
3 * Module Name: utdelete - object deletion and reference count utilities
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2012, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47#include "acnamesp.h"
48#include "acevents.h"
49
50#define _COMPONENT ACPI_UTILITIES
51ACPI_MODULE_NAME("utdelete")
52
53/* Local prototypes */
54static void acpi_ut_delete_internal_obj(union acpi_operand_object *object);
55
56static void
57acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action);
58
59/*******************************************************************************
60 *
61 * FUNCTION: acpi_ut_delete_internal_obj
62 *
63 * PARAMETERS: Object - Object to be deleted
64 *
65 * RETURN: None
66 *
67 * DESCRIPTION: Low level object deletion, after reference counts have been
68 * updated (All reference counts, including sub-objects!)
69 *
70 ******************************************************************************/
71
72static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
73{
74 void *obj_pointer = NULL;
75 union acpi_operand_object *handler_desc;
76 union acpi_operand_object *second_desc;
77 union acpi_operand_object *next_desc;
78 union acpi_operand_object **last_obj_ptr;
79
80 ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
81
82 if (!object) {
83 return_VOID;
84 }
85
86 /*
87 * Must delete or free any pointers within the object that are not
88 * actual ACPI objects (for example, a raw buffer pointer).
89 */
90 switch (object->common.type) {
91 case ACPI_TYPE_STRING:
92
93 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
94 "**** String %p, ptr %p\n", object,
95 object->string.pointer));
96
97 /* Free the actual string buffer */
98
99 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
100
101 /* But only if it is NOT a pointer into an ACPI table */
102
103 obj_pointer = object->string.pointer;
104 }
105 break;
106
107 case ACPI_TYPE_BUFFER:
108
109 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
110 "**** Buffer %p, ptr %p\n", object,
111 object->buffer.pointer));
112
113 /* Free the actual buffer */
114
115 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
116
117 /* But only if it is NOT a pointer into an ACPI table */
118
119 obj_pointer = object->buffer.pointer;
120 }
121 break;
122
123 case ACPI_TYPE_PACKAGE:
124
125 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
126 " **** Package of count %X\n",
127 object->package.count));
128
129 /*
130 * Elements of the package are not handled here, they are deleted
131 * separately
132 */
133
134 /* Free the (variable length) element pointer array */
135
136 obj_pointer = object->package.elements;
137 break;
138
139 /*
140 * These objects have a possible list of notify handlers.
141 * Device object also may have a GPE block.
142 */
143 case ACPI_TYPE_DEVICE:
144
145 if (object->device.gpe_block) {
146 (void)acpi_ev_delete_gpe_block(object->device.
147 gpe_block);
148 }
149
150 /*lint -fallthrough */
151
152 case ACPI_TYPE_PROCESSOR:
153 case ACPI_TYPE_THERMAL:
154
155 /* Walk the notify handler list for this object */
156
157 handler_desc = object->common_notify.handler;
158 while (handler_desc) {
159 next_desc = handler_desc->address_space.next;
160 acpi_ut_remove_reference(handler_desc);
161 handler_desc = next_desc;
162 }
163 break;
164
165 case ACPI_TYPE_MUTEX:
166
167 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
168 "***** Mutex %p, OS Mutex %p\n",
169 object, object->mutex.os_mutex));
170
171 if (object == acpi_gbl_global_lock_mutex) {
172
173 /* Global Lock has extra semaphore */
174
175 (void)
176 acpi_os_delete_semaphore
177 (acpi_gbl_global_lock_semaphore);
178 acpi_gbl_global_lock_semaphore = NULL;
179
180 acpi_os_delete_mutex(object->mutex.os_mutex);
181 acpi_gbl_global_lock_mutex = NULL;
182 } else {
183 acpi_ex_unlink_mutex(object);
184 acpi_os_delete_mutex(object->mutex.os_mutex);
185 }
186 break;
187
188 case ACPI_TYPE_EVENT:
189
190 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
191 "***** Event %p, OS Semaphore %p\n",
192 object, object->event.os_semaphore));
193
194 (void)acpi_os_delete_semaphore(object->event.os_semaphore);
195 object->event.os_semaphore = NULL;
196 break;
197
198 case ACPI_TYPE_METHOD:
199
200 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
201 "***** Method %p\n", object));
202
203 /* Delete the method mutex if it exists */
204
205 if (object->method.mutex) {
206 acpi_os_delete_mutex(object->method.mutex->mutex.
207 os_mutex);
208 acpi_ut_delete_object_desc(object->method.mutex);
209 object->method.mutex = NULL;
210 }
211 break;
212
213 case ACPI_TYPE_REGION:
214
215 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
216 "***** Region %p\n", object));
217
218 /*
219 * Update address_range list. However, only permanent regions
220 * are installed in this list. (Not created within a method)
221 */
222 if (!(object->region.node->flags & ANOBJ_TEMPORARY)) {
223 acpi_ut_remove_address_range(object->region.space_id,
224 object->region.node);
225 }
226
227 second_desc = acpi_ns_get_secondary_object(object);
228 if (second_desc) {
229 /*
230 * Free the region_context if and only if the handler is one of the
231 * default handlers -- and therefore, we created the context object
232 * locally, it was not created by an external caller.
233 */
234 handler_desc = object->region.handler;
235 if (handler_desc) {
236 next_desc =
237 handler_desc->address_space.region_list;
238 last_obj_ptr =
239 &handler_desc->address_space.region_list;
240
241 /* Remove the region object from the handler's list */
242
243 while (next_desc) {
244 if (next_desc == object) {
245 *last_obj_ptr =
246 next_desc->region.next;
247 break;
248 }
249
250 /* Walk the linked list of handler */
251
252 last_obj_ptr = &next_desc->region.next;
253 next_desc = next_desc->region.next;
254 }
255
256 if (handler_desc->address_space.handler_flags &
257 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
258
259 /* Deactivate region and free region context */
260
261 if (handler_desc->address_space.setup) {
262 (void)handler_desc->
263 address_space.setup(object,
264 ACPI_REGION_DEACTIVATE,
265 handler_desc->
266 address_space.
267 context,
268 &second_desc->
269 extra.
270 region_context);
271 }
272 }
273
274 acpi_ut_remove_reference(handler_desc);
275 }
276
277 /* Now we can free the Extra object */
278
279 acpi_ut_delete_object_desc(second_desc);
280 }
281 break;
282
283 case ACPI_TYPE_BUFFER_FIELD:
284
285 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
286 "***** Buffer Field %p\n", object));
287
288 second_desc = acpi_ns_get_secondary_object(object);
289 if (second_desc) {
290 acpi_ut_delete_object_desc(second_desc);
291 }
292 break;
293
294 case ACPI_TYPE_LOCAL_BANK_FIELD:
295
296 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
297 "***** Bank Field %p\n", object));
298
299 second_desc = acpi_ns_get_secondary_object(object);
300 if (second_desc) {
301 acpi_ut_delete_object_desc(second_desc);
302 }
303 break;
304
305 default:
306 break;
307 }
308
309 /* Free any allocated memory (pointer within the object) found above */
310
311 if (obj_pointer) {
312 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
313 "Deleting Object Subptr %p\n", obj_pointer));
314 ACPI_FREE(obj_pointer);
315 }
316
317 /* Now the object can be safely deleted */
318
319 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Deleting Object %p [%s]\n",
320 object, acpi_ut_get_object_type_name(object)));
321
322 acpi_ut_delete_object_desc(object);
323 return_VOID;
324}
325
326/*******************************************************************************
327 *
328 * FUNCTION: acpi_ut_delete_internal_object_list
329 *
330 * PARAMETERS: obj_list - Pointer to the list to be deleted
331 *
332 * RETURN: None
333 *
334 * DESCRIPTION: This function deletes an internal object list, including both
335 * simple objects and package objects
336 *
337 ******************************************************************************/
338
339void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list)
340{
341 union acpi_operand_object **internal_obj;
342
343 ACPI_FUNCTION_TRACE(ut_delete_internal_object_list);
344
345 /* Walk the null-terminated internal list */
346
347 for (internal_obj = obj_list; *internal_obj; internal_obj++) {
348 acpi_ut_remove_reference(*internal_obj);
349 }
350
351 /* Free the combined parameter pointer list and object array */
352
353 ACPI_FREE(obj_list);
354 return_VOID;
355}
356
357/*******************************************************************************
358 *
359 * FUNCTION: acpi_ut_update_ref_count
360 *
361 * PARAMETERS: Object - Object whose ref count is to be updated
362 * Action - What to do
363 *
364 * RETURN: New ref count
365 *
366 * DESCRIPTION: Modify the ref count and return it.
367 *
368 ******************************************************************************/
369
370static void
371acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
372{
373 u16 count;
374 u16 new_count;
375
376 ACPI_FUNCTION_NAME(ut_update_ref_count);
377
378 if (!object) {
379 return;
380 }
381
382 count = object->common.reference_count;
383 new_count = count;
384
385 /*
386 * Perform the reference count action (increment, decrement, force delete)
387 */
388 switch (action) {
389 case REF_INCREMENT:
390
391 new_count++;
392 object->common.reference_count = new_count;
393
394 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
395 "Obj %p Refs=%X, [Incremented]\n",
396 object, new_count));
397 break;
398
399 case REF_DECREMENT:
400
401 if (count < 1) {
402 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
403 "Obj %p Refs=%X, can't decrement! (Set to 0)\n",
404 object, new_count));
405
406 new_count = 0;
407 } else {
408 new_count--;
409
410 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
411 "Obj %p Refs=%X, [Decremented]\n",
412 object, new_count));
413 }
414
415 if (object->common.type == ACPI_TYPE_METHOD) {
416 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
417 "Method Obj %p Refs=%X, [Decremented]\n",
418 object, new_count));
419 }
420
421 object->common.reference_count = new_count;
422 if (new_count == 0) {
423 acpi_ut_delete_internal_obj(object);
424 }
425 break;
426
427 case REF_FORCE_DELETE:
428
429 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
430 "Obj %p Refs=%X, Force delete! (Set to 0)\n",
431 object, count));
432
433 new_count = 0;
434 object->common.reference_count = new_count;
435 acpi_ut_delete_internal_obj(object);
436 break;
437
438 default:
439
440 ACPI_ERROR((AE_INFO, "Unknown action (0x%X)", action));
441 break;
442 }
443
444 /*
445 * Sanity check the reference count, for debug purposes only.
446 * (A deleted object will have a huge reference count)
447 */
448 if (count > ACPI_MAX_REFERENCE_COUNT) {
449 ACPI_WARNING((AE_INFO,
450 "Large Reference Count (0x%X) in object %p",
451 count, object));
452 }
453}
454
455/*******************************************************************************
456 *
457 * FUNCTION: acpi_ut_update_object_reference
458 *
459 * PARAMETERS: Object - Increment ref count for this object
460 * and all sub-objects
461 * Action - Either REF_INCREMENT or REF_DECREMENT or
462 * REF_FORCE_DELETE
463 *
464 * RETURN: Status
465 *
466 * DESCRIPTION: Increment the object reference count
467 *
468 * Object references are incremented when:
469 * 1) An object is attached to a Node (namespace object)
470 * 2) An object is copied (all subobjects must be incremented)
471 *
472 * Object references are decremented when:
473 * 1) An object is detached from an Node
474 *
475 ******************************************************************************/
476
477acpi_status
478acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
479{
480 acpi_status status = AE_OK;
481 union acpi_generic_state *state_list = NULL;
482 union acpi_operand_object *next_object = NULL;
483 union acpi_generic_state *state;
484 u32 i;
485
486 ACPI_FUNCTION_TRACE_PTR(ut_update_object_reference, object);
487
488 while (object) {
489
490 /* Make sure that this isn't a namespace handle */
491
492 if (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) {
493 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
494 "Object %p is NS handle\n", object));
495 return_ACPI_STATUS(AE_OK);
496 }
497
498 /*
499 * All sub-objects must have their reference count incremented also.
500 * Different object types have different subobjects.
501 */
502 switch (object->common.type) {
503 case ACPI_TYPE_DEVICE:
504 case ACPI_TYPE_PROCESSOR:
505 case ACPI_TYPE_POWER:
506 case ACPI_TYPE_THERMAL:
507
508 /* Update the notify objects for these types (if present) */
509
510 acpi_ut_update_ref_count(object->common_notify.
511 system_notify, action);
512 acpi_ut_update_ref_count(object->common_notify.
513 device_notify, action);
514 break;
515
516 case ACPI_TYPE_PACKAGE:
517 /*
518 * We must update all the sub-objects of the package,
519 * each of whom may have their own sub-objects.
520 */
521 for (i = 0; i < object->package.count; i++) {
522 /*
523 * Push each element onto the stack for later processing.
524 * Note: There can be null elements within the package,
525 * these are simply ignored
526 */
527 status =
528 acpi_ut_create_update_state_and_push
529 (object->package.elements[i], action,
530 &state_list);
531 if (ACPI_FAILURE(status)) {
532 goto error_exit;
533 }
534 }
535 break;
536
537 case ACPI_TYPE_BUFFER_FIELD:
538
539 next_object = object->buffer_field.buffer_obj;
540 break;
541
542 case ACPI_TYPE_LOCAL_REGION_FIELD:
543
544 next_object = object->field.region_obj;
545 break;
546
547 case ACPI_TYPE_LOCAL_BANK_FIELD:
548
549 next_object = object->bank_field.bank_obj;
550 status =
551 acpi_ut_create_update_state_and_push(object->
552 bank_field.
553 region_obj,
554 action,
555 &state_list);
556 if (ACPI_FAILURE(status)) {
557 goto error_exit;
558 }
559 break;
560
561 case ACPI_TYPE_LOCAL_INDEX_FIELD:
562
563 next_object = object->index_field.index_obj;
564 status =
565 acpi_ut_create_update_state_and_push(object->
566 index_field.
567 data_obj,
568 action,
569 &state_list);
570 if (ACPI_FAILURE(status)) {
571 goto error_exit;
572 }
573 break;
574
575 case ACPI_TYPE_LOCAL_REFERENCE:
576 /*
577 * The target of an Index (a package, string, or buffer) or a named
578 * reference must track changes to the ref count of the index or
579 * target object.
580 */
581 if ((object->reference.class == ACPI_REFCLASS_INDEX) ||
582 (object->reference.class == ACPI_REFCLASS_NAME)) {
583 next_object = object->reference.object;
584 }
585 break;
586
587 case ACPI_TYPE_REGION:
588 default:
589 break; /* No subobjects for all other types */
590 }
591
592 /*
593 * Now we can update the count in the main object. This can only
594 * happen after we update the sub-objects in case this causes the
595 * main object to be deleted.
596 */
597 acpi_ut_update_ref_count(object, action);
598 object = NULL;
599
600 /* Move on to the next object to be updated */
601
602 if (next_object) {
603 object = next_object;
604 next_object = NULL;
605 } else if (state_list) {
606 state = acpi_ut_pop_generic_state(&state_list);
607 object = state->update.object;
608 acpi_ut_delete_generic_state(state);
609 }
610 }
611
612 return_ACPI_STATUS(AE_OK);
613
614 error_exit:
615
616 ACPI_EXCEPTION((AE_INFO, status,
617 "Could not update object reference count"));
618
619 /* Free any stacked Update State objects */
620
621 while (state_list) {
622 state = acpi_ut_pop_generic_state(&state_list);
623 acpi_ut_delete_generic_state(state);
624 }
625
626 return_ACPI_STATUS(status);
627}
628
629/*******************************************************************************
630 *
631 * FUNCTION: acpi_ut_add_reference
632 *
633 * PARAMETERS: Object - Object whose reference count is to be
634 * incremented
635 *
636 * RETURN: None
637 *
638 * DESCRIPTION: Add one reference to an ACPI object
639 *
640 ******************************************************************************/
641
642void acpi_ut_add_reference(union acpi_operand_object *object)
643{
644
645 ACPI_FUNCTION_TRACE_PTR(ut_add_reference, object);
646
647 /* Ensure that we have a valid object */
648
649 if (!acpi_ut_valid_internal_object(object)) {
650 return_VOID;
651 }
652
653 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
654 "Obj %p Current Refs=%X [To Be Incremented]\n",
655 object, object->common.reference_count));
656
657 /* Increment the reference count */
658
659 (void)acpi_ut_update_object_reference(object, REF_INCREMENT);
660 return_VOID;
661}
662
663/*******************************************************************************
664 *
665 * FUNCTION: acpi_ut_remove_reference
666 *
667 * PARAMETERS: Object - Object whose ref count will be decremented
668 *
669 * RETURN: None
670 *
671 * DESCRIPTION: Decrement the reference count of an ACPI internal object
672 *
673 ******************************************************************************/
674
675void acpi_ut_remove_reference(union acpi_operand_object *object)
676{
677
678 ACPI_FUNCTION_TRACE_PTR(ut_remove_reference, object);
679
680 /*
681 * Allow a NULL pointer to be passed in, just ignore it. This saves
682 * each caller from having to check. Also, ignore NS nodes.
683 *
684 */
685 if (!object ||
686 (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED)) {
687 return_VOID;
688 }
689
690 /* Ensure that we have a valid object */
691
692 if (!acpi_ut_valid_internal_object(object)) {
693 return_VOID;
694 }
695
696 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
697 "Obj %p Current Refs=%X [To Be Decremented]\n",
698 object, object->common.reference_count));
699
700 /*
701 * Decrement the reference count, and only actually delete the object
702 * if the reference count becomes 0. (Must also decrement the ref count
703 * of all subobjects!)
704 */
705 (void)acpi_ut_update_object_reference(object, REF_DECREMENT);
706 return_VOID;
707}
1/*******************************************************************************
2 *
3 * Module Name: utdelete - object deletion and reference count utilities
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2014, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47#include "acnamesp.h"
48#include "acevents.h"
49
50#define _COMPONENT ACPI_UTILITIES
51ACPI_MODULE_NAME("utdelete")
52
53/* Local prototypes */
54static void acpi_ut_delete_internal_obj(union acpi_operand_object *object);
55
56static void
57acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action);
58
59/*******************************************************************************
60 *
61 * FUNCTION: acpi_ut_delete_internal_obj
62 *
63 * PARAMETERS: object - Object to be deleted
64 *
65 * RETURN: None
66 *
67 * DESCRIPTION: Low level object deletion, after reference counts have been
68 * updated (All reference counts, including sub-objects!)
69 *
70 ******************************************************************************/
71
72static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
73{
74 void *obj_pointer = NULL;
75 union acpi_operand_object *handler_desc;
76 union acpi_operand_object *second_desc;
77 union acpi_operand_object *next_desc;
78 union acpi_operand_object *start_desc;
79 union acpi_operand_object **last_obj_ptr;
80
81 ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
82
83 if (!object) {
84 return_VOID;
85 }
86
87 /*
88 * Must delete or free any pointers within the object that are not
89 * actual ACPI objects (for example, a raw buffer pointer).
90 */
91 switch (object->common.type) {
92 case ACPI_TYPE_STRING:
93
94 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
95 "**** String %p, ptr %p\n", object,
96 object->string.pointer));
97
98 /* Free the actual string buffer */
99
100 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
101
102 /* But only if it is NOT a pointer into an ACPI table */
103
104 obj_pointer = object->string.pointer;
105 }
106 break;
107
108 case ACPI_TYPE_BUFFER:
109
110 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
111 "**** Buffer %p, ptr %p\n", object,
112 object->buffer.pointer));
113
114 /* Free the actual buffer */
115
116 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
117
118 /* But only if it is NOT a pointer into an ACPI table */
119
120 obj_pointer = object->buffer.pointer;
121 }
122 break;
123
124 case ACPI_TYPE_PACKAGE:
125
126 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
127 " **** Package of count %X\n",
128 object->package.count));
129
130 /*
131 * Elements of the package are not handled here, they are deleted
132 * separately
133 */
134
135 /* Free the (variable length) element pointer array */
136
137 obj_pointer = object->package.elements;
138 break;
139
140 /*
141 * These objects have a possible list of notify handlers.
142 * Device object also may have a GPE block.
143 */
144 case ACPI_TYPE_DEVICE:
145
146 if (object->device.gpe_block) {
147 (void)acpi_ev_delete_gpe_block(object->device.
148 gpe_block);
149 }
150
151 /*lint -fallthrough */
152
153 case ACPI_TYPE_PROCESSOR:
154 case ACPI_TYPE_THERMAL:
155
156 /* Walk the address handler list for this object */
157
158 handler_desc = object->common_notify.handler;
159 while (handler_desc) {
160 next_desc = handler_desc->address_space.next;
161 acpi_ut_remove_reference(handler_desc);
162 handler_desc = next_desc;
163 }
164 break;
165
166 case ACPI_TYPE_MUTEX:
167
168 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
169 "***** Mutex %p, OS Mutex %p\n",
170 object, object->mutex.os_mutex));
171
172 if (object == acpi_gbl_global_lock_mutex) {
173
174 /* Global Lock has extra semaphore */
175
176 (void)
177 acpi_os_delete_semaphore
178 (acpi_gbl_global_lock_semaphore);
179 acpi_gbl_global_lock_semaphore = NULL;
180
181 acpi_os_delete_mutex(object->mutex.os_mutex);
182 acpi_gbl_global_lock_mutex = NULL;
183 } else {
184 acpi_ex_unlink_mutex(object);
185 acpi_os_delete_mutex(object->mutex.os_mutex);
186 }
187 break;
188
189 case ACPI_TYPE_EVENT:
190
191 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
192 "***** Event %p, OS Semaphore %p\n",
193 object, object->event.os_semaphore));
194
195 (void)acpi_os_delete_semaphore(object->event.os_semaphore);
196 object->event.os_semaphore = NULL;
197 break;
198
199 case ACPI_TYPE_METHOD:
200
201 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
202 "***** Method %p\n", object));
203
204 /* Delete the method mutex if it exists */
205
206 if (object->method.mutex) {
207 acpi_os_delete_mutex(object->method.mutex->mutex.
208 os_mutex);
209 acpi_ut_delete_object_desc(object->method.mutex);
210 object->method.mutex = NULL;
211 }
212 break;
213
214 case ACPI_TYPE_REGION:
215
216 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
217 "***** Region %p\n", object));
218
219 /*
220 * Update address_range list. However, only permanent regions
221 * are installed in this list. (Not created within a method)
222 */
223 if (!(object->region.node->flags & ANOBJ_TEMPORARY)) {
224 acpi_ut_remove_address_range(object->region.space_id,
225 object->region.node);
226 }
227
228 second_desc = acpi_ns_get_secondary_object(object);
229 if (second_desc) {
230 /*
231 * Free the region_context if and only if the handler is one of the
232 * default handlers -- and therefore, we created the context object
233 * locally, it was not created by an external caller.
234 */
235 handler_desc = object->region.handler;
236 if (handler_desc) {
237 next_desc =
238 handler_desc->address_space.region_list;
239 start_desc = next_desc;
240 last_obj_ptr =
241 &handler_desc->address_space.region_list;
242
243 /* Remove the region object from the handler list */
244
245 while (next_desc) {
246 if (next_desc == object) {
247 *last_obj_ptr =
248 next_desc->region.next;
249 break;
250 }
251
252 /* Walk the linked list of handlers */
253
254 last_obj_ptr = &next_desc->region.next;
255 next_desc = next_desc->region.next;
256
257 /* Prevent infinite loop if list is corrupted */
258
259 if (next_desc == start_desc) {
260 ACPI_ERROR((AE_INFO,
261 "Circular region list in address handler object %p",
262 handler_desc));
263 return_VOID;
264 }
265 }
266
267 if (handler_desc->address_space.handler_flags &
268 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
269
270 /* Deactivate region and free region context */
271
272 if (handler_desc->address_space.setup) {
273 (void)handler_desc->
274 address_space.setup(object,
275 ACPI_REGION_DEACTIVATE,
276 handler_desc->
277 address_space.
278 context,
279 &second_desc->
280 extra.
281 region_context);
282 }
283 }
284
285 acpi_ut_remove_reference(handler_desc);
286 }
287
288 /* Now we can free the Extra object */
289
290 acpi_ut_delete_object_desc(second_desc);
291 }
292 break;
293
294 case ACPI_TYPE_BUFFER_FIELD:
295
296 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
297 "***** Buffer Field %p\n", object));
298
299 second_desc = acpi_ns_get_secondary_object(object);
300 if (second_desc) {
301 acpi_ut_delete_object_desc(second_desc);
302 }
303 break;
304
305 case ACPI_TYPE_LOCAL_BANK_FIELD:
306
307 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
308 "***** Bank Field %p\n", object));
309
310 second_desc = acpi_ns_get_secondary_object(object);
311 if (second_desc) {
312 acpi_ut_delete_object_desc(second_desc);
313 }
314 break;
315
316 default:
317
318 break;
319 }
320
321 /* Free any allocated memory (pointer within the object) found above */
322
323 if (obj_pointer) {
324 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
325 "Deleting Object Subptr %p\n", obj_pointer));
326 ACPI_FREE(obj_pointer);
327 }
328
329 /* Now the object can be safely deleted */
330
331 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Deleting Object %p [%s]\n",
332 object, acpi_ut_get_object_type_name(object)));
333
334 acpi_ut_delete_object_desc(object);
335 return_VOID;
336}
337
338/*******************************************************************************
339 *
340 * FUNCTION: acpi_ut_delete_internal_object_list
341 *
342 * PARAMETERS: obj_list - Pointer to the list to be deleted
343 *
344 * RETURN: None
345 *
346 * DESCRIPTION: This function deletes an internal object list, including both
347 * simple objects and package objects
348 *
349 ******************************************************************************/
350
351void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list)
352{
353 union acpi_operand_object **internal_obj;
354
355 ACPI_FUNCTION_ENTRY();
356
357 /* Walk the null-terminated internal list */
358
359 for (internal_obj = obj_list; *internal_obj; internal_obj++) {
360 acpi_ut_remove_reference(*internal_obj);
361 }
362
363 /* Free the combined parameter pointer list and object array */
364
365 ACPI_FREE(obj_list);
366 return;
367}
368
369/*******************************************************************************
370 *
371 * FUNCTION: acpi_ut_update_ref_count
372 *
373 * PARAMETERS: object - Object whose ref count is to be updated
374 * action - What to do (REF_INCREMENT or REF_DECREMENT)
375 *
376 * RETURN: None. Sets new reference count within the object
377 *
378 * DESCRIPTION: Modify the reference count for an internal acpi object
379 *
380 ******************************************************************************/
381
382static void
383acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
384{
385 u16 original_count;
386 u16 new_count = 0;
387 acpi_cpu_flags lock_flags;
388
389 ACPI_FUNCTION_NAME(ut_update_ref_count);
390
391 if (!object) {
392 return;
393 }
394
395 /*
396 * Always get the reference count lock. Note: Interpreter and/or
397 * Namespace is not always locked when this function is called.
398 */
399 lock_flags = acpi_os_acquire_lock(acpi_gbl_reference_count_lock);
400 original_count = object->common.reference_count;
401
402 /* Perform the reference count action (increment, decrement) */
403
404 switch (action) {
405 case REF_INCREMENT:
406
407 new_count = original_count + 1;
408 object->common.reference_count = new_count;
409 acpi_os_release_lock(acpi_gbl_reference_count_lock, lock_flags);
410
411 /* The current reference count should never be zero here */
412
413 if (!original_count) {
414 ACPI_WARNING((AE_INFO,
415 "Obj %p, Reference Count was zero before increment\n",
416 object));
417 }
418
419 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
420 "Obj %p Type %.2X Refs %.2X [Incremented]\n",
421 object, object->common.type, new_count));
422 break;
423
424 case REF_DECREMENT:
425
426 /* The current reference count must be non-zero */
427
428 if (original_count) {
429 new_count = original_count - 1;
430 object->common.reference_count = new_count;
431 }
432
433 acpi_os_release_lock(acpi_gbl_reference_count_lock, lock_flags);
434
435 if (!original_count) {
436 ACPI_WARNING((AE_INFO,
437 "Obj %p, Reference Count is already zero, cannot decrement\n",
438 object));
439 }
440
441 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
442 "Obj %p Type %.2X Refs %.2X [Decremented]\n",
443 object, object->common.type, new_count));
444
445 /* Actually delete the object on a reference count of zero */
446
447 if (new_count == 0) {
448 acpi_ut_delete_internal_obj(object);
449 }
450 break;
451
452 default:
453
454 acpi_os_release_lock(acpi_gbl_reference_count_lock, lock_flags);
455 ACPI_ERROR((AE_INFO, "Unknown Reference Count action (0x%X)",
456 action));
457 return;
458 }
459
460 /*
461 * Sanity check the reference count, for debug purposes only.
462 * (A deleted object will have a huge reference count)
463 */
464 if (new_count > ACPI_MAX_REFERENCE_COUNT) {
465 ACPI_WARNING((AE_INFO,
466 "Large Reference Count (0x%X) in object %p, Type=0x%.2X",
467 new_count, object, object->common.type));
468 }
469}
470
471/*******************************************************************************
472 *
473 * FUNCTION: acpi_ut_update_object_reference
474 *
475 * PARAMETERS: object - Increment ref count for this object
476 * and all sub-objects
477 * action - Either REF_INCREMENT or REF_DECREMENT
478 *
479 * RETURN: Status
480 *
481 * DESCRIPTION: Increment the object reference count
482 *
483 * Object references are incremented when:
484 * 1) An object is attached to a Node (namespace object)
485 * 2) An object is copied (all subobjects must be incremented)
486 *
487 * Object references are decremented when:
488 * 1) An object is detached from an Node
489 *
490 ******************************************************************************/
491
492acpi_status
493acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
494{
495 acpi_status status = AE_OK;
496 union acpi_generic_state *state_list = NULL;
497 union acpi_operand_object *next_object = NULL;
498 union acpi_operand_object *prev_object;
499 union acpi_generic_state *state;
500 u32 i;
501
502 ACPI_FUNCTION_NAME(ut_update_object_reference);
503
504 while (object) {
505
506 /* Make sure that this isn't a namespace handle */
507
508 if (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) {
509 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
510 "Object %p is NS handle\n", object));
511 return (AE_OK);
512 }
513
514 /*
515 * All sub-objects must have their reference count incremented also.
516 * Different object types have different subobjects.
517 */
518 switch (object->common.type) {
519 case ACPI_TYPE_DEVICE:
520 case ACPI_TYPE_PROCESSOR:
521 case ACPI_TYPE_POWER:
522 case ACPI_TYPE_THERMAL:
523 /*
524 * Update the notify objects for these types (if present)
525 * Two lists, system and device notify handlers.
526 */
527 for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
528 prev_object =
529 object->common_notify.notify_list[i];
530 while (prev_object) {
531 next_object =
532 prev_object->notify.next[i];
533 acpi_ut_update_ref_count(prev_object,
534 action);
535 prev_object = next_object;
536 }
537 }
538 break;
539
540 case ACPI_TYPE_PACKAGE:
541 /*
542 * We must update all the sub-objects of the package,
543 * each of whom may have their own sub-objects.
544 */
545 for (i = 0; i < object->package.count; i++) {
546 /*
547 * Null package elements are legal and can be simply
548 * ignored.
549 */
550 next_object = object->package.elements[i];
551 if (!next_object) {
552 continue;
553 }
554
555 switch (next_object->common.type) {
556 case ACPI_TYPE_INTEGER:
557 case ACPI_TYPE_STRING:
558 case ACPI_TYPE_BUFFER:
559 /*
560 * For these very simple sub-objects, we can just
561 * update the reference count here and continue.
562 * Greatly increases performance of this operation.
563 */
564 acpi_ut_update_ref_count(next_object,
565 action);
566 break;
567
568 default:
569 /*
570 * For complex sub-objects, push them onto the stack
571 * for later processing (this eliminates recursion.)
572 */
573 status =
574 acpi_ut_create_update_state_and_push
575 (next_object, action, &state_list);
576 if (ACPI_FAILURE(status)) {
577 goto error_exit;
578 }
579 break;
580 }
581 }
582 next_object = NULL;
583 break;
584
585 case ACPI_TYPE_BUFFER_FIELD:
586
587 next_object = object->buffer_field.buffer_obj;
588 break;
589
590 case ACPI_TYPE_LOCAL_REGION_FIELD:
591
592 next_object = object->field.region_obj;
593 break;
594
595 case ACPI_TYPE_LOCAL_BANK_FIELD:
596
597 next_object = object->bank_field.bank_obj;
598 status =
599 acpi_ut_create_update_state_and_push(object->
600 bank_field.
601 region_obj,
602 action,
603 &state_list);
604 if (ACPI_FAILURE(status)) {
605 goto error_exit;
606 }
607 break;
608
609 case ACPI_TYPE_LOCAL_INDEX_FIELD:
610
611 next_object = object->index_field.index_obj;
612 status =
613 acpi_ut_create_update_state_and_push(object->
614 index_field.
615 data_obj,
616 action,
617 &state_list);
618 if (ACPI_FAILURE(status)) {
619 goto error_exit;
620 }
621 break;
622
623 case ACPI_TYPE_LOCAL_REFERENCE:
624 /*
625 * The target of an Index (a package, string, or buffer) or a named
626 * reference must track changes to the ref count of the index or
627 * target object.
628 */
629 if ((object->reference.class == ACPI_REFCLASS_INDEX) ||
630 (object->reference.class == ACPI_REFCLASS_NAME)) {
631 next_object = object->reference.object;
632 }
633 break;
634
635 case ACPI_TYPE_REGION:
636 default:
637
638 break; /* No subobjects for all other types */
639 }
640
641 /*
642 * Now we can update the count in the main object. This can only
643 * happen after we update the sub-objects in case this causes the
644 * main object to be deleted.
645 */
646 acpi_ut_update_ref_count(object, action);
647 object = NULL;
648
649 /* Move on to the next object to be updated */
650
651 if (next_object) {
652 object = next_object;
653 next_object = NULL;
654 } else if (state_list) {
655 state = acpi_ut_pop_generic_state(&state_list);
656 object = state->update.object;
657 acpi_ut_delete_generic_state(state);
658 }
659 }
660
661 return (AE_OK);
662
663error_exit:
664
665 ACPI_EXCEPTION((AE_INFO, status,
666 "Could not update object reference count"));
667
668 /* Free any stacked Update State objects */
669
670 while (state_list) {
671 state = acpi_ut_pop_generic_state(&state_list);
672 acpi_ut_delete_generic_state(state);
673 }
674
675 return (status);
676}
677
678/*******************************************************************************
679 *
680 * FUNCTION: acpi_ut_add_reference
681 *
682 * PARAMETERS: object - Object whose reference count is to be
683 * incremented
684 *
685 * RETURN: None
686 *
687 * DESCRIPTION: Add one reference to an ACPI object
688 *
689 ******************************************************************************/
690
691void acpi_ut_add_reference(union acpi_operand_object *object)
692{
693
694 ACPI_FUNCTION_NAME(ut_add_reference);
695
696 /* Ensure that we have a valid object */
697
698 if (!acpi_ut_valid_internal_object(object)) {
699 return;
700 }
701
702 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
703 "Obj %p Current Refs=%X [To Be Incremented]\n",
704 object, object->common.reference_count));
705
706 /* Increment the reference count */
707
708 (void)acpi_ut_update_object_reference(object, REF_INCREMENT);
709 return;
710}
711
712/*******************************************************************************
713 *
714 * FUNCTION: acpi_ut_remove_reference
715 *
716 * PARAMETERS: object - Object whose ref count will be decremented
717 *
718 * RETURN: None
719 *
720 * DESCRIPTION: Decrement the reference count of an ACPI internal object
721 *
722 ******************************************************************************/
723
724void acpi_ut_remove_reference(union acpi_operand_object *object)
725{
726
727 ACPI_FUNCTION_NAME(ut_remove_reference);
728
729 /*
730 * Allow a NULL pointer to be passed in, just ignore it. This saves
731 * each caller from having to check. Also, ignore NS nodes.
732 */
733 if (!object ||
734 (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED)) {
735 return;
736 }
737
738 /* Ensure that we have a valid object */
739
740 if (!acpi_ut_valid_internal_object(object)) {
741 return;
742 }
743
744 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
745 "Obj %p Current Refs=%X [To Be Decremented]\n",
746 object, object->common.reference_count));
747
748 /*
749 * Decrement the reference count, and only actually delete the object
750 * if the reference count becomes 0. (Must also decrement the ref count
751 * of all subobjects!)
752 */
753 (void)acpi_ut_update_object_reference(object, REF_DECREMENT);
754 return;
755}