Loading...
1/*******************************************************************************
2 *
3 * Module Name: utdelete - object deletion and reference count utilities
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2012, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47#include "acnamesp.h"
48#include "acevents.h"
49
50#define _COMPONENT ACPI_UTILITIES
51ACPI_MODULE_NAME("utdelete")
52
53/* Local prototypes */
54static void acpi_ut_delete_internal_obj(union acpi_operand_object *object);
55
56static void
57acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action);
58
59/*******************************************************************************
60 *
61 * FUNCTION: acpi_ut_delete_internal_obj
62 *
63 * PARAMETERS: Object - Object to be deleted
64 *
65 * RETURN: None
66 *
67 * DESCRIPTION: Low level object deletion, after reference counts have been
68 * updated (All reference counts, including sub-objects!)
69 *
70 ******************************************************************************/
71
72static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
73{
74 void *obj_pointer = NULL;
75 union acpi_operand_object *handler_desc;
76 union acpi_operand_object *second_desc;
77 union acpi_operand_object *next_desc;
78 union acpi_operand_object **last_obj_ptr;
79
80 ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
81
82 if (!object) {
83 return_VOID;
84 }
85
86 /*
87 * Must delete or free any pointers within the object that are not
88 * actual ACPI objects (for example, a raw buffer pointer).
89 */
90 switch (object->common.type) {
91 case ACPI_TYPE_STRING:
92
93 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
94 "**** String %p, ptr %p\n", object,
95 object->string.pointer));
96
97 /* Free the actual string buffer */
98
99 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
100
101 /* But only if it is NOT a pointer into an ACPI table */
102
103 obj_pointer = object->string.pointer;
104 }
105 break;
106
107 case ACPI_TYPE_BUFFER:
108
109 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
110 "**** Buffer %p, ptr %p\n", object,
111 object->buffer.pointer));
112
113 /* Free the actual buffer */
114
115 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
116
117 /* But only if it is NOT a pointer into an ACPI table */
118
119 obj_pointer = object->buffer.pointer;
120 }
121 break;
122
123 case ACPI_TYPE_PACKAGE:
124
125 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
126 " **** Package of count %X\n",
127 object->package.count));
128
129 /*
130 * Elements of the package are not handled here, they are deleted
131 * separately
132 */
133
134 /* Free the (variable length) element pointer array */
135
136 obj_pointer = object->package.elements;
137 break;
138
139 /*
140 * These objects have a possible list of notify handlers.
141 * Device object also may have a GPE block.
142 */
143 case ACPI_TYPE_DEVICE:
144
145 if (object->device.gpe_block) {
146 (void)acpi_ev_delete_gpe_block(object->device.
147 gpe_block);
148 }
149
150 /*lint -fallthrough */
151
152 case ACPI_TYPE_PROCESSOR:
153 case ACPI_TYPE_THERMAL:
154
155 /* Walk the notify handler list for this object */
156
157 handler_desc = object->common_notify.handler;
158 while (handler_desc) {
159 next_desc = handler_desc->address_space.next;
160 acpi_ut_remove_reference(handler_desc);
161 handler_desc = next_desc;
162 }
163 break;
164
165 case ACPI_TYPE_MUTEX:
166
167 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
168 "***** Mutex %p, OS Mutex %p\n",
169 object, object->mutex.os_mutex));
170
171 if (object == acpi_gbl_global_lock_mutex) {
172
173 /* Global Lock has extra semaphore */
174
175 (void)
176 acpi_os_delete_semaphore
177 (acpi_gbl_global_lock_semaphore);
178 acpi_gbl_global_lock_semaphore = NULL;
179
180 acpi_os_delete_mutex(object->mutex.os_mutex);
181 acpi_gbl_global_lock_mutex = NULL;
182 } else {
183 acpi_ex_unlink_mutex(object);
184 acpi_os_delete_mutex(object->mutex.os_mutex);
185 }
186 break;
187
188 case ACPI_TYPE_EVENT:
189
190 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
191 "***** Event %p, OS Semaphore %p\n",
192 object, object->event.os_semaphore));
193
194 (void)acpi_os_delete_semaphore(object->event.os_semaphore);
195 object->event.os_semaphore = NULL;
196 break;
197
198 case ACPI_TYPE_METHOD:
199
200 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
201 "***** Method %p\n", object));
202
203 /* Delete the method mutex if it exists */
204
205 if (object->method.mutex) {
206 acpi_os_delete_mutex(object->method.mutex->mutex.
207 os_mutex);
208 acpi_ut_delete_object_desc(object->method.mutex);
209 object->method.mutex = NULL;
210 }
211 break;
212
213 case ACPI_TYPE_REGION:
214
215 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
216 "***** Region %p\n", object));
217
218 /*
219 * Update address_range list. However, only permanent regions
220 * are installed in this list. (Not created within a method)
221 */
222 if (!(object->region.node->flags & ANOBJ_TEMPORARY)) {
223 acpi_ut_remove_address_range(object->region.space_id,
224 object->region.node);
225 }
226
227 second_desc = acpi_ns_get_secondary_object(object);
228 if (second_desc) {
229 /*
230 * Free the region_context if and only if the handler is one of the
231 * default handlers -- and therefore, we created the context object
232 * locally, it was not created by an external caller.
233 */
234 handler_desc = object->region.handler;
235 if (handler_desc) {
236 next_desc =
237 handler_desc->address_space.region_list;
238 last_obj_ptr =
239 &handler_desc->address_space.region_list;
240
241 /* Remove the region object from the handler's list */
242
243 while (next_desc) {
244 if (next_desc == object) {
245 *last_obj_ptr =
246 next_desc->region.next;
247 break;
248 }
249
250 /* Walk the linked list of handler */
251
252 last_obj_ptr = &next_desc->region.next;
253 next_desc = next_desc->region.next;
254 }
255
256 if (handler_desc->address_space.handler_flags &
257 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
258
259 /* Deactivate region and free region context */
260
261 if (handler_desc->address_space.setup) {
262 (void)handler_desc->
263 address_space.setup(object,
264 ACPI_REGION_DEACTIVATE,
265 handler_desc->
266 address_space.
267 context,
268 &second_desc->
269 extra.
270 region_context);
271 }
272 }
273
274 acpi_ut_remove_reference(handler_desc);
275 }
276
277 /* Now we can free the Extra object */
278
279 acpi_ut_delete_object_desc(second_desc);
280 }
281 break;
282
283 case ACPI_TYPE_BUFFER_FIELD:
284
285 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
286 "***** Buffer Field %p\n", object));
287
288 second_desc = acpi_ns_get_secondary_object(object);
289 if (second_desc) {
290 acpi_ut_delete_object_desc(second_desc);
291 }
292 break;
293
294 case ACPI_TYPE_LOCAL_BANK_FIELD:
295
296 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
297 "***** Bank Field %p\n", object));
298
299 second_desc = acpi_ns_get_secondary_object(object);
300 if (second_desc) {
301 acpi_ut_delete_object_desc(second_desc);
302 }
303 break;
304
305 default:
306 break;
307 }
308
309 /* Free any allocated memory (pointer within the object) found above */
310
311 if (obj_pointer) {
312 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
313 "Deleting Object Subptr %p\n", obj_pointer));
314 ACPI_FREE(obj_pointer);
315 }
316
317 /* Now the object can be safely deleted */
318
319 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Deleting Object %p [%s]\n",
320 object, acpi_ut_get_object_type_name(object)));
321
322 acpi_ut_delete_object_desc(object);
323 return_VOID;
324}
325
326/*******************************************************************************
327 *
328 * FUNCTION: acpi_ut_delete_internal_object_list
329 *
330 * PARAMETERS: obj_list - Pointer to the list to be deleted
331 *
332 * RETURN: None
333 *
334 * DESCRIPTION: This function deletes an internal object list, including both
335 * simple objects and package objects
336 *
337 ******************************************************************************/
338
339void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list)
340{
341 union acpi_operand_object **internal_obj;
342
343 ACPI_FUNCTION_TRACE(ut_delete_internal_object_list);
344
345 /* Walk the null-terminated internal list */
346
347 for (internal_obj = obj_list; *internal_obj; internal_obj++) {
348 acpi_ut_remove_reference(*internal_obj);
349 }
350
351 /* Free the combined parameter pointer list and object array */
352
353 ACPI_FREE(obj_list);
354 return_VOID;
355}
356
357/*******************************************************************************
358 *
359 * FUNCTION: acpi_ut_update_ref_count
360 *
361 * PARAMETERS: Object - Object whose ref count is to be updated
362 * Action - What to do
363 *
364 * RETURN: New ref count
365 *
366 * DESCRIPTION: Modify the ref count and return it.
367 *
368 ******************************************************************************/
369
370static void
371acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
372{
373 u16 count;
374 u16 new_count;
375
376 ACPI_FUNCTION_NAME(ut_update_ref_count);
377
378 if (!object) {
379 return;
380 }
381
382 count = object->common.reference_count;
383 new_count = count;
384
385 /*
386 * Perform the reference count action (increment, decrement, force delete)
387 */
388 switch (action) {
389 case REF_INCREMENT:
390
391 new_count++;
392 object->common.reference_count = new_count;
393
394 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
395 "Obj %p Refs=%X, [Incremented]\n",
396 object, new_count));
397 break;
398
399 case REF_DECREMENT:
400
401 if (count < 1) {
402 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
403 "Obj %p Refs=%X, can't decrement! (Set to 0)\n",
404 object, new_count));
405
406 new_count = 0;
407 } else {
408 new_count--;
409
410 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
411 "Obj %p Refs=%X, [Decremented]\n",
412 object, new_count));
413 }
414
415 if (object->common.type == ACPI_TYPE_METHOD) {
416 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
417 "Method Obj %p Refs=%X, [Decremented]\n",
418 object, new_count));
419 }
420
421 object->common.reference_count = new_count;
422 if (new_count == 0) {
423 acpi_ut_delete_internal_obj(object);
424 }
425 break;
426
427 case REF_FORCE_DELETE:
428
429 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
430 "Obj %p Refs=%X, Force delete! (Set to 0)\n",
431 object, count));
432
433 new_count = 0;
434 object->common.reference_count = new_count;
435 acpi_ut_delete_internal_obj(object);
436 break;
437
438 default:
439
440 ACPI_ERROR((AE_INFO, "Unknown action (0x%X)", action));
441 break;
442 }
443
444 /*
445 * Sanity check the reference count, for debug purposes only.
446 * (A deleted object will have a huge reference count)
447 */
448 if (count > ACPI_MAX_REFERENCE_COUNT) {
449 ACPI_WARNING((AE_INFO,
450 "Large Reference Count (0x%X) in object %p",
451 count, object));
452 }
453}
454
455/*******************************************************************************
456 *
457 * FUNCTION: acpi_ut_update_object_reference
458 *
459 * PARAMETERS: Object - Increment ref count for this object
460 * and all sub-objects
461 * Action - Either REF_INCREMENT or REF_DECREMENT or
462 * REF_FORCE_DELETE
463 *
464 * RETURN: Status
465 *
466 * DESCRIPTION: Increment the object reference count
467 *
468 * Object references are incremented when:
469 * 1) An object is attached to a Node (namespace object)
470 * 2) An object is copied (all subobjects must be incremented)
471 *
472 * Object references are decremented when:
473 * 1) An object is detached from an Node
474 *
475 ******************************************************************************/
476
477acpi_status
478acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
479{
480 acpi_status status = AE_OK;
481 union acpi_generic_state *state_list = NULL;
482 union acpi_operand_object *next_object = NULL;
483 union acpi_generic_state *state;
484 u32 i;
485
486 ACPI_FUNCTION_TRACE_PTR(ut_update_object_reference, object);
487
488 while (object) {
489
490 /* Make sure that this isn't a namespace handle */
491
492 if (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) {
493 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
494 "Object %p is NS handle\n", object));
495 return_ACPI_STATUS(AE_OK);
496 }
497
498 /*
499 * All sub-objects must have their reference count incremented also.
500 * Different object types have different subobjects.
501 */
502 switch (object->common.type) {
503 case ACPI_TYPE_DEVICE:
504 case ACPI_TYPE_PROCESSOR:
505 case ACPI_TYPE_POWER:
506 case ACPI_TYPE_THERMAL:
507
508 /* Update the notify objects for these types (if present) */
509
510 acpi_ut_update_ref_count(object->common_notify.
511 system_notify, action);
512 acpi_ut_update_ref_count(object->common_notify.
513 device_notify, action);
514 break;
515
516 case ACPI_TYPE_PACKAGE:
517 /*
518 * We must update all the sub-objects of the package,
519 * each of whom may have their own sub-objects.
520 */
521 for (i = 0; i < object->package.count; i++) {
522 /*
523 * Push each element onto the stack for later processing.
524 * Note: There can be null elements within the package,
525 * these are simply ignored
526 */
527 status =
528 acpi_ut_create_update_state_and_push
529 (object->package.elements[i], action,
530 &state_list);
531 if (ACPI_FAILURE(status)) {
532 goto error_exit;
533 }
534 }
535 break;
536
537 case ACPI_TYPE_BUFFER_FIELD:
538
539 next_object = object->buffer_field.buffer_obj;
540 break;
541
542 case ACPI_TYPE_LOCAL_REGION_FIELD:
543
544 next_object = object->field.region_obj;
545 break;
546
547 case ACPI_TYPE_LOCAL_BANK_FIELD:
548
549 next_object = object->bank_field.bank_obj;
550 status =
551 acpi_ut_create_update_state_and_push(object->
552 bank_field.
553 region_obj,
554 action,
555 &state_list);
556 if (ACPI_FAILURE(status)) {
557 goto error_exit;
558 }
559 break;
560
561 case ACPI_TYPE_LOCAL_INDEX_FIELD:
562
563 next_object = object->index_field.index_obj;
564 status =
565 acpi_ut_create_update_state_and_push(object->
566 index_field.
567 data_obj,
568 action,
569 &state_list);
570 if (ACPI_FAILURE(status)) {
571 goto error_exit;
572 }
573 break;
574
575 case ACPI_TYPE_LOCAL_REFERENCE:
576 /*
577 * The target of an Index (a package, string, or buffer) or a named
578 * reference must track changes to the ref count of the index or
579 * target object.
580 */
581 if ((object->reference.class == ACPI_REFCLASS_INDEX) ||
582 (object->reference.class == ACPI_REFCLASS_NAME)) {
583 next_object = object->reference.object;
584 }
585 break;
586
587 case ACPI_TYPE_REGION:
588 default:
589 break; /* No subobjects for all other types */
590 }
591
592 /*
593 * Now we can update the count in the main object. This can only
594 * happen after we update the sub-objects in case this causes the
595 * main object to be deleted.
596 */
597 acpi_ut_update_ref_count(object, action);
598 object = NULL;
599
600 /* Move on to the next object to be updated */
601
602 if (next_object) {
603 object = next_object;
604 next_object = NULL;
605 } else if (state_list) {
606 state = acpi_ut_pop_generic_state(&state_list);
607 object = state->update.object;
608 acpi_ut_delete_generic_state(state);
609 }
610 }
611
612 return_ACPI_STATUS(AE_OK);
613
614 error_exit:
615
616 ACPI_EXCEPTION((AE_INFO, status,
617 "Could not update object reference count"));
618
619 /* Free any stacked Update State objects */
620
621 while (state_list) {
622 state = acpi_ut_pop_generic_state(&state_list);
623 acpi_ut_delete_generic_state(state);
624 }
625
626 return_ACPI_STATUS(status);
627}
628
629/*******************************************************************************
630 *
631 * FUNCTION: acpi_ut_add_reference
632 *
633 * PARAMETERS: Object - Object whose reference count is to be
634 * incremented
635 *
636 * RETURN: None
637 *
638 * DESCRIPTION: Add one reference to an ACPI object
639 *
640 ******************************************************************************/
641
642void acpi_ut_add_reference(union acpi_operand_object *object)
643{
644
645 ACPI_FUNCTION_TRACE_PTR(ut_add_reference, object);
646
647 /* Ensure that we have a valid object */
648
649 if (!acpi_ut_valid_internal_object(object)) {
650 return_VOID;
651 }
652
653 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
654 "Obj %p Current Refs=%X [To Be Incremented]\n",
655 object, object->common.reference_count));
656
657 /* Increment the reference count */
658
659 (void)acpi_ut_update_object_reference(object, REF_INCREMENT);
660 return_VOID;
661}
662
663/*******************************************************************************
664 *
665 * FUNCTION: acpi_ut_remove_reference
666 *
667 * PARAMETERS: Object - Object whose ref count will be decremented
668 *
669 * RETURN: None
670 *
671 * DESCRIPTION: Decrement the reference count of an ACPI internal object
672 *
673 ******************************************************************************/
674
675void acpi_ut_remove_reference(union acpi_operand_object *object)
676{
677
678 ACPI_FUNCTION_TRACE_PTR(ut_remove_reference, object);
679
680 /*
681 * Allow a NULL pointer to be passed in, just ignore it. This saves
682 * each caller from having to check. Also, ignore NS nodes.
683 *
684 */
685 if (!object ||
686 (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED)) {
687 return_VOID;
688 }
689
690 /* Ensure that we have a valid object */
691
692 if (!acpi_ut_valid_internal_object(object)) {
693 return_VOID;
694 }
695
696 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
697 "Obj %p Current Refs=%X [To Be Decremented]\n",
698 object, object->common.reference_count));
699
700 /*
701 * Decrement the reference count, and only actually delete the object
702 * if the reference count becomes 0. (Must also decrement the ref count
703 * of all subobjects!)
704 */
705 (void)acpi_ut_update_object_reference(object, REF_DECREMENT);
706 return_VOID;
707}
1/*******************************************************************************
2 *
3 * Module Name: utdelete - object deletion and reference count utilities
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2011, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47#include "acnamesp.h"
48#include "acevents.h"
49
50#define _COMPONENT ACPI_UTILITIES
51ACPI_MODULE_NAME("utdelete")
52
53/* Local prototypes */
54static void acpi_ut_delete_internal_obj(union acpi_operand_object *object);
55
56static void
57acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action);
58
59/*******************************************************************************
60 *
61 * FUNCTION: acpi_ut_delete_internal_obj
62 *
63 * PARAMETERS: Object - Object to be deleted
64 *
65 * RETURN: None
66 *
67 * DESCRIPTION: Low level object deletion, after reference counts have been
68 * updated (All reference counts, including sub-objects!)
69 *
70 ******************************************************************************/
71
72static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
73{
74 void *obj_pointer = NULL;
75 union acpi_operand_object *handler_desc;
76 union acpi_operand_object *second_desc;
77 union acpi_operand_object *next_desc;
78 union acpi_operand_object **last_obj_ptr;
79
80 ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
81
82 if (!object) {
83 return_VOID;
84 }
85
86 /*
87 * Must delete or free any pointers within the object that are not
88 * actual ACPI objects (for example, a raw buffer pointer).
89 */
90 switch (object->common.type) {
91 case ACPI_TYPE_STRING:
92
93 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
94 "**** String %p, ptr %p\n", object,
95 object->string.pointer));
96
97 /* Free the actual string buffer */
98
99 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
100
101 /* But only if it is NOT a pointer into an ACPI table */
102
103 obj_pointer = object->string.pointer;
104 }
105 break;
106
107 case ACPI_TYPE_BUFFER:
108
109 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
110 "**** Buffer %p, ptr %p\n", object,
111 object->buffer.pointer));
112
113 /* Free the actual buffer */
114
115 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
116
117 /* But only if it is NOT a pointer into an ACPI table */
118
119 obj_pointer = object->buffer.pointer;
120 }
121 break;
122
123 case ACPI_TYPE_PACKAGE:
124
125 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
126 " **** Package of count %X\n",
127 object->package.count));
128
129 /*
130 * Elements of the package are not handled here, they are deleted
131 * separately
132 */
133
134 /* Free the (variable length) element pointer array */
135
136 obj_pointer = object->package.elements;
137 break;
138
139 /*
140 * These objects have a possible list of notify handlers.
141 * Device object also may have a GPE block.
142 */
143 case ACPI_TYPE_DEVICE:
144
145 if (object->device.gpe_block) {
146 (void)acpi_ev_delete_gpe_block(object->device.
147 gpe_block);
148 }
149
150 /*lint -fallthrough */
151
152 case ACPI_TYPE_PROCESSOR:
153 case ACPI_TYPE_THERMAL:
154
155 /* Walk the notify handler list for this object */
156
157 handler_desc = object->common_notify.handler;
158 while (handler_desc) {
159 next_desc = handler_desc->address_space.next;
160 acpi_ut_remove_reference(handler_desc);
161 handler_desc = next_desc;
162 }
163 break;
164
165 case ACPI_TYPE_MUTEX:
166
167 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
168 "***** Mutex %p, OS Mutex %p\n",
169 object, object->mutex.os_mutex));
170
171 if (object == acpi_gbl_global_lock_mutex) {
172
173 /* Global Lock has extra semaphore */
174
175 (void)
176 acpi_os_delete_semaphore
177 (acpi_gbl_global_lock_semaphore);
178 acpi_gbl_global_lock_semaphore = NULL;
179
180 acpi_os_delete_mutex(object->mutex.os_mutex);
181 acpi_gbl_global_lock_mutex = NULL;
182 } else {
183 acpi_ex_unlink_mutex(object);
184 acpi_os_delete_mutex(object->mutex.os_mutex);
185 }
186 break;
187
188 case ACPI_TYPE_EVENT:
189
190 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
191 "***** Event %p, OS Semaphore %p\n",
192 object, object->event.os_semaphore));
193
194 (void)acpi_os_delete_semaphore(object->event.os_semaphore);
195 object->event.os_semaphore = NULL;
196 break;
197
198 case ACPI_TYPE_METHOD:
199
200 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
201 "***** Method %p\n", object));
202
203 /* Delete the method mutex if it exists */
204
205 if (object->method.mutex) {
206 acpi_os_delete_mutex(object->method.mutex->mutex.
207 os_mutex);
208 acpi_ut_delete_object_desc(object->method.mutex);
209 object->method.mutex = NULL;
210 }
211 break;
212
213 case ACPI_TYPE_REGION:
214
215 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
216 "***** Region %p\n", object));
217
218 /* Invalidate the region address/length via the host OS */
219
220 acpi_os_invalidate_address(object->region.space_id,
221 object->region.address,
222 (acpi_size) object->region.length);
223
224 second_desc = acpi_ns_get_secondary_object(object);
225 if (second_desc) {
226 /*
227 * Free the region_context if and only if the handler is one of the
228 * default handlers -- and therefore, we created the context object
229 * locally, it was not created by an external caller.
230 */
231 handler_desc = object->region.handler;
232 if (handler_desc) {
233 next_desc =
234 handler_desc->address_space.region_list;
235 last_obj_ptr =
236 &handler_desc->address_space.region_list;
237
238 /* Remove the region object from the handler's list */
239
240 while (next_desc) {
241 if (next_desc == object) {
242 *last_obj_ptr =
243 next_desc->region.next;
244 break;
245 }
246
247 /* Walk the linked list of handler */
248
249 last_obj_ptr = &next_desc->region.next;
250 next_desc = next_desc->region.next;
251 }
252
253 if (handler_desc->address_space.handler_flags &
254 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
255
256 /* Deactivate region and free region context */
257
258 if (handler_desc->address_space.setup) {
259 (void)handler_desc->
260 address_space.setup(object,
261 ACPI_REGION_DEACTIVATE,
262 handler_desc->
263 address_space.
264 context,
265 &second_desc->
266 extra.
267 region_context);
268 }
269 }
270
271 acpi_ut_remove_reference(handler_desc);
272 }
273
274 /* Now we can free the Extra object */
275
276 acpi_ut_delete_object_desc(second_desc);
277 }
278 break;
279
280 case ACPI_TYPE_BUFFER_FIELD:
281
282 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
283 "***** Buffer Field %p\n", object));
284
285 second_desc = acpi_ns_get_secondary_object(object);
286 if (second_desc) {
287 acpi_ut_delete_object_desc(second_desc);
288 }
289 break;
290
291 case ACPI_TYPE_LOCAL_BANK_FIELD:
292
293 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
294 "***** Bank Field %p\n", object));
295
296 second_desc = acpi_ns_get_secondary_object(object);
297 if (second_desc) {
298 acpi_ut_delete_object_desc(second_desc);
299 }
300 break;
301
302 default:
303 break;
304 }
305
306 /* Free any allocated memory (pointer within the object) found above */
307
308 if (obj_pointer) {
309 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
310 "Deleting Object Subptr %p\n", obj_pointer));
311 ACPI_FREE(obj_pointer);
312 }
313
314 /* Now the object can be safely deleted */
315
316 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Deleting Object %p [%s]\n",
317 object, acpi_ut_get_object_type_name(object)));
318
319 acpi_ut_delete_object_desc(object);
320 return_VOID;
321}
322
323/*******************************************************************************
324 *
325 * FUNCTION: acpi_ut_delete_internal_object_list
326 *
327 * PARAMETERS: obj_list - Pointer to the list to be deleted
328 *
329 * RETURN: None
330 *
331 * DESCRIPTION: This function deletes an internal object list, including both
332 * simple objects and package objects
333 *
334 ******************************************************************************/
335
336void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list)
337{
338 union acpi_operand_object **internal_obj;
339
340 ACPI_FUNCTION_TRACE(ut_delete_internal_object_list);
341
342 /* Walk the null-terminated internal list */
343
344 for (internal_obj = obj_list; *internal_obj; internal_obj++) {
345 acpi_ut_remove_reference(*internal_obj);
346 }
347
348 /* Free the combined parameter pointer list and object array */
349
350 ACPI_FREE(obj_list);
351 return_VOID;
352}
353
354/*******************************************************************************
355 *
356 * FUNCTION: acpi_ut_update_ref_count
357 *
358 * PARAMETERS: Object - Object whose ref count is to be updated
359 * Action - What to do
360 *
361 * RETURN: New ref count
362 *
363 * DESCRIPTION: Modify the ref count and return it.
364 *
365 ******************************************************************************/
366
367static void
368acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
369{
370 u16 count;
371 u16 new_count;
372
373 ACPI_FUNCTION_NAME(ut_update_ref_count);
374
375 if (!object) {
376 return;
377 }
378
379 count = object->common.reference_count;
380 new_count = count;
381
382 /*
383 * Perform the reference count action (increment, decrement, force delete)
384 */
385 switch (action) {
386 case REF_INCREMENT:
387
388 new_count++;
389 object->common.reference_count = new_count;
390
391 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
392 "Obj %p Refs=%X, [Incremented]\n",
393 object, new_count));
394 break;
395
396 case REF_DECREMENT:
397
398 if (count < 1) {
399 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
400 "Obj %p Refs=%X, can't decrement! (Set to 0)\n",
401 object, new_count));
402
403 new_count = 0;
404 } else {
405 new_count--;
406
407 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
408 "Obj %p Refs=%X, [Decremented]\n",
409 object, new_count));
410 }
411
412 if (object->common.type == ACPI_TYPE_METHOD) {
413 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
414 "Method Obj %p Refs=%X, [Decremented]\n",
415 object, new_count));
416 }
417
418 object->common.reference_count = new_count;
419 if (new_count == 0) {
420 acpi_ut_delete_internal_obj(object);
421 }
422 break;
423
424 case REF_FORCE_DELETE:
425
426 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
427 "Obj %p Refs=%X, Force delete! (Set to 0)\n",
428 object, count));
429
430 new_count = 0;
431 object->common.reference_count = new_count;
432 acpi_ut_delete_internal_obj(object);
433 break;
434
435 default:
436
437 ACPI_ERROR((AE_INFO, "Unknown action (0x%X)", action));
438 break;
439 }
440
441 /*
442 * Sanity check the reference count, for debug purposes only.
443 * (A deleted object will have a huge reference count)
444 */
445 if (count > ACPI_MAX_REFERENCE_COUNT) {
446 ACPI_WARNING((AE_INFO,
447 "Large Reference Count (0x%X) in object %p",
448 count, object));
449 }
450}
451
452/*******************************************************************************
453 *
454 * FUNCTION: acpi_ut_update_object_reference
455 *
456 * PARAMETERS: Object - Increment ref count for this object
457 * and all sub-objects
458 * Action - Either REF_INCREMENT or REF_DECREMENT or
459 * REF_FORCE_DELETE
460 *
461 * RETURN: Status
462 *
463 * DESCRIPTION: Increment the object reference count
464 *
465 * Object references are incremented when:
466 * 1) An object is attached to a Node (namespace object)
467 * 2) An object is copied (all subobjects must be incremented)
468 *
469 * Object references are decremented when:
470 * 1) An object is detached from an Node
471 *
472 ******************************************************************************/
473
474acpi_status
475acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
476{
477 acpi_status status = AE_OK;
478 union acpi_generic_state *state_list = NULL;
479 union acpi_operand_object *next_object = NULL;
480 union acpi_generic_state *state;
481 u32 i;
482
483 ACPI_FUNCTION_TRACE_PTR(ut_update_object_reference, object);
484
485 while (object) {
486
487 /* Make sure that this isn't a namespace handle */
488
489 if (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) {
490 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
491 "Object %p is NS handle\n", object));
492 return_ACPI_STATUS(AE_OK);
493 }
494
495 /*
496 * All sub-objects must have their reference count incremented also.
497 * Different object types have different subobjects.
498 */
499 switch (object->common.type) {
500 case ACPI_TYPE_DEVICE:
501 case ACPI_TYPE_PROCESSOR:
502 case ACPI_TYPE_POWER:
503 case ACPI_TYPE_THERMAL:
504
505 /* Update the notify objects for these types (if present) */
506
507 acpi_ut_update_ref_count(object->common_notify.
508 system_notify, action);
509 acpi_ut_update_ref_count(object->common_notify.
510 device_notify, action);
511 break;
512
513 case ACPI_TYPE_PACKAGE:
514 /*
515 * We must update all the sub-objects of the package,
516 * each of whom may have their own sub-objects.
517 */
518 for (i = 0; i < object->package.count; i++) {
519 /*
520 * Push each element onto the stack for later processing.
521 * Note: There can be null elements within the package,
522 * these are simply ignored
523 */
524 status =
525 acpi_ut_create_update_state_and_push
526 (object->package.elements[i], action,
527 &state_list);
528 if (ACPI_FAILURE(status)) {
529 goto error_exit;
530 }
531 }
532 break;
533
534 case ACPI_TYPE_BUFFER_FIELD:
535
536 next_object = object->buffer_field.buffer_obj;
537 break;
538
539 case ACPI_TYPE_LOCAL_REGION_FIELD:
540
541 next_object = object->field.region_obj;
542 break;
543
544 case ACPI_TYPE_LOCAL_BANK_FIELD:
545
546 next_object = object->bank_field.bank_obj;
547 status =
548 acpi_ut_create_update_state_and_push(object->
549 bank_field.
550 region_obj,
551 action,
552 &state_list);
553 if (ACPI_FAILURE(status)) {
554 goto error_exit;
555 }
556 break;
557
558 case ACPI_TYPE_LOCAL_INDEX_FIELD:
559
560 next_object = object->index_field.index_obj;
561 status =
562 acpi_ut_create_update_state_and_push(object->
563 index_field.
564 data_obj,
565 action,
566 &state_list);
567 if (ACPI_FAILURE(status)) {
568 goto error_exit;
569 }
570 break;
571
572 case ACPI_TYPE_LOCAL_REFERENCE:
573 /*
574 * The target of an Index (a package, string, or buffer) or a named
575 * reference must track changes to the ref count of the index or
576 * target object.
577 */
578 if ((object->reference.class == ACPI_REFCLASS_INDEX) ||
579 (object->reference.class == ACPI_REFCLASS_NAME)) {
580 next_object = object->reference.object;
581 }
582 break;
583
584 case ACPI_TYPE_REGION:
585 default:
586 break; /* No subobjects for all other types */
587 }
588
589 /*
590 * Now we can update the count in the main object. This can only
591 * happen after we update the sub-objects in case this causes the
592 * main object to be deleted.
593 */
594 acpi_ut_update_ref_count(object, action);
595 object = NULL;
596
597 /* Move on to the next object to be updated */
598
599 if (next_object) {
600 object = next_object;
601 next_object = NULL;
602 } else if (state_list) {
603 state = acpi_ut_pop_generic_state(&state_list);
604 object = state->update.object;
605 acpi_ut_delete_generic_state(state);
606 }
607 }
608
609 return_ACPI_STATUS(AE_OK);
610
611 error_exit:
612
613 ACPI_EXCEPTION((AE_INFO, status,
614 "Could not update object reference count"));
615
616 /* Free any stacked Update State objects */
617
618 while (state_list) {
619 state = acpi_ut_pop_generic_state(&state_list);
620 acpi_ut_delete_generic_state(state);
621 }
622
623 return_ACPI_STATUS(status);
624}
625
626/*******************************************************************************
627 *
628 * FUNCTION: acpi_ut_add_reference
629 *
630 * PARAMETERS: Object - Object whose reference count is to be
631 * incremented
632 *
633 * RETURN: None
634 *
635 * DESCRIPTION: Add one reference to an ACPI object
636 *
637 ******************************************************************************/
638
639void acpi_ut_add_reference(union acpi_operand_object *object)
640{
641
642 ACPI_FUNCTION_TRACE_PTR(ut_add_reference, object);
643
644 /* Ensure that we have a valid object */
645
646 if (!acpi_ut_valid_internal_object(object)) {
647 return_VOID;
648 }
649
650 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
651 "Obj %p Current Refs=%X [To Be Incremented]\n",
652 object, object->common.reference_count));
653
654 /* Increment the reference count */
655
656 (void)acpi_ut_update_object_reference(object, REF_INCREMENT);
657 return_VOID;
658}
659
660/*******************************************************************************
661 *
662 * FUNCTION: acpi_ut_remove_reference
663 *
664 * PARAMETERS: Object - Object whose ref count will be decremented
665 *
666 * RETURN: None
667 *
668 * DESCRIPTION: Decrement the reference count of an ACPI internal object
669 *
670 ******************************************************************************/
671
672void acpi_ut_remove_reference(union acpi_operand_object *object)
673{
674
675 ACPI_FUNCTION_TRACE_PTR(ut_remove_reference, object);
676
677 /*
678 * Allow a NULL pointer to be passed in, just ignore it. This saves
679 * each caller from having to check. Also, ignore NS nodes.
680 *
681 */
682 if (!object ||
683 (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED)) {
684 return_VOID;
685 }
686
687 /* Ensure that we have a valid object */
688
689 if (!acpi_ut_valid_internal_object(object)) {
690 return_VOID;
691 }
692
693 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
694 "Obj %p Current Refs=%X [To Be Decremented]\n",
695 object, object->common.reference_count));
696
697 /*
698 * Decrement the reference count, and only actually delete the object
699 * if the reference count becomes 0. (Must also decrement the ref count
700 * of all subobjects!)
701 */
702 (void)acpi_ut_update_object_reference(object, REF_DECREMENT);
703 return_VOID;
704}