Loading...
1/*
2 * linux/kernel/time/timekeeping.c
3 *
4 * Kernel timekeeping code and accessor functions
5 *
6 * This code was moved from linux/kernel/timer.c.
7 * Please see that file for copyright and history logs.
8 *
9 */
10
11#include <linux/timekeeper_internal.h>
12#include <linux/module.h>
13#include <linux/interrupt.h>
14#include <linux/percpu.h>
15#include <linux/init.h>
16#include <linux/mm.h>
17#include <linux/sched.h>
18#include <linux/syscore_ops.h>
19#include <linux/clocksource.h>
20#include <linux/jiffies.h>
21#include <linux/time.h>
22#include <linux/tick.h>
23#include <linux/stop_machine.h>
24#include <linux/pvclock_gtod.h>
25#include <linux/compiler.h>
26
27#include "tick-internal.h"
28#include "ntp_internal.h"
29#include "timekeeping_internal.h"
30
31#define TK_CLEAR_NTP (1 << 0)
32#define TK_MIRROR (1 << 1)
33#define TK_CLOCK_WAS_SET (1 << 2)
34
35static struct timekeeper timekeeper;
36static DEFINE_RAW_SPINLOCK(timekeeper_lock);
37static seqcount_t timekeeper_seq;
38static struct timekeeper shadow_timekeeper;
39
40/* flag for if timekeeping is suspended */
41int __read_mostly timekeeping_suspended;
42
43/* Flag for if there is a persistent clock on this platform */
44bool __read_mostly persistent_clock_exist = false;
45
46static inline void tk_normalize_xtime(struct timekeeper *tk)
47{
48 while (tk->xtime_nsec >= ((u64)NSEC_PER_SEC << tk->shift)) {
49 tk->xtime_nsec -= (u64)NSEC_PER_SEC << tk->shift;
50 tk->xtime_sec++;
51 }
52}
53
54static void tk_set_xtime(struct timekeeper *tk, const struct timespec *ts)
55{
56 tk->xtime_sec = ts->tv_sec;
57 tk->xtime_nsec = (u64)ts->tv_nsec << tk->shift;
58}
59
60static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts)
61{
62 tk->xtime_sec += ts->tv_sec;
63 tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift;
64 tk_normalize_xtime(tk);
65}
66
67static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec wtm)
68{
69 struct timespec tmp;
70
71 /*
72 * Verify consistency of: offset_real = -wall_to_monotonic
73 * before modifying anything
74 */
75 set_normalized_timespec(&tmp, -tk->wall_to_monotonic.tv_sec,
76 -tk->wall_to_monotonic.tv_nsec);
77 WARN_ON_ONCE(tk->offs_real.tv64 != timespec_to_ktime(tmp).tv64);
78 tk->wall_to_monotonic = wtm;
79 set_normalized_timespec(&tmp, -wtm.tv_sec, -wtm.tv_nsec);
80 tk->offs_real = timespec_to_ktime(tmp);
81 tk->offs_tai = ktime_add(tk->offs_real, ktime_set(tk->tai_offset, 0));
82}
83
84static void tk_set_sleep_time(struct timekeeper *tk, struct timespec t)
85{
86 /* Verify consistency before modifying */
87 WARN_ON_ONCE(tk->offs_boot.tv64 != timespec_to_ktime(tk->total_sleep_time).tv64);
88
89 tk->total_sleep_time = t;
90 tk->offs_boot = timespec_to_ktime(t);
91}
92
93/**
94 * tk_setup_internals - Set up internals to use clocksource clock.
95 *
96 * @tk: The target timekeeper to setup.
97 * @clock: Pointer to clocksource.
98 *
99 * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
100 * pair and interval request.
101 *
102 * Unless you're the timekeeping code, you should not be using this!
103 */
104static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
105{
106 cycle_t interval;
107 u64 tmp, ntpinterval;
108 struct clocksource *old_clock;
109
110 old_clock = tk->clock;
111 tk->clock = clock;
112 tk->cycle_last = clock->cycle_last = clock->read(clock);
113
114 /* Do the ns -> cycle conversion first, using original mult */
115 tmp = NTP_INTERVAL_LENGTH;
116 tmp <<= clock->shift;
117 ntpinterval = tmp;
118 tmp += clock->mult/2;
119 do_div(tmp, clock->mult);
120 if (tmp == 0)
121 tmp = 1;
122
123 interval = (cycle_t) tmp;
124 tk->cycle_interval = interval;
125
126 /* Go back from cycles -> shifted ns */
127 tk->xtime_interval = (u64) interval * clock->mult;
128 tk->xtime_remainder = ntpinterval - tk->xtime_interval;
129 tk->raw_interval =
130 ((u64) interval * clock->mult) >> clock->shift;
131
132 /* if changing clocks, convert xtime_nsec shift units */
133 if (old_clock) {
134 int shift_change = clock->shift - old_clock->shift;
135 if (shift_change < 0)
136 tk->xtime_nsec >>= -shift_change;
137 else
138 tk->xtime_nsec <<= shift_change;
139 }
140 tk->shift = clock->shift;
141
142 tk->ntp_error = 0;
143 tk->ntp_error_shift = NTP_SCALE_SHIFT - clock->shift;
144
145 /*
146 * The timekeeper keeps its own mult values for the currently
147 * active clocksource. These value will be adjusted via NTP
148 * to counteract clock drifting.
149 */
150 tk->mult = clock->mult;
151}
152
153/* Timekeeper helper functions. */
154
155#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
156u32 (*arch_gettimeoffset)(void);
157
158u32 get_arch_timeoffset(void)
159{
160 if (likely(arch_gettimeoffset))
161 return arch_gettimeoffset();
162 return 0;
163}
164#else
165static inline u32 get_arch_timeoffset(void) { return 0; }
166#endif
167
168static inline s64 timekeeping_get_ns(struct timekeeper *tk)
169{
170 cycle_t cycle_now, cycle_delta;
171 struct clocksource *clock;
172 s64 nsec;
173
174 /* read clocksource: */
175 clock = tk->clock;
176 cycle_now = clock->read(clock);
177
178 /* calculate the delta since the last update_wall_time: */
179 cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
180
181 nsec = cycle_delta * tk->mult + tk->xtime_nsec;
182 nsec >>= tk->shift;
183
184 /* If arch requires, add in get_arch_timeoffset() */
185 return nsec + get_arch_timeoffset();
186}
187
188static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)
189{
190 cycle_t cycle_now, cycle_delta;
191 struct clocksource *clock;
192 s64 nsec;
193
194 /* read clocksource: */
195 clock = tk->clock;
196 cycle_now = clock->read(clock);
197
198 /* calculate the delta since the last update_wall_time: */
199 cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
200
201 /* convert delta to nanoseconds. */
202 nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
203
204 /* If arch requires, add in get_arch_timeoffset() */
205 return nsec + get_arch_timeoffset();
206}
207
208static RAW_NOTIFIER_HEAD(pvclock_gtod_chain);
209
210static void update_pvclock_gtod(struct timekeeper *tk, bool was_set)
211{
212 raw_notifier_call_chain(&pvclock_gtod_chain, was_set, tk);
213}
214
215/**
216 * pvclock_gtod_register_notifier - register a pvclock timedata update listener
217 */
218int pvclock_gtod_register_notifier(struct notifier_block *nb)
219{
220 struct timekeeper *tk = &timekeeper;
221 unsigned long flags;
222 int ret;
223
224 raw_spin_lock_irqsave(&timekeeper_lock, flags);
225 ret = raw_notifier_chain_register(&pvclock_gtod_chain, nb);
226 update_pvclock_gtod(tk, true);
227 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
228
229 return ret;
230}
231EXPORT_SYMBOL_GPL(pvclock_gtod_register_notifier);
232
233/**
234 * pvclock_gtod_unregister_notifier - unregister a pvclock
235 * timedata update listener
236 */
237int pvclock_gtod_unregister_notifier(struct notifier_block *nb)
238{
239 unsigned long flags;
240 int ret;
241
242 raw_spin_lock_irqsave(&timekeeper_lock, flags);
243 ret = raw_notifier_chain_unregister(&pvclock_gtod_chain, nb);
244 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
245
246 return ret;
247}
248EXPORT_SYMBOL_GPL(pvclock_gtod_unregister_notifier);
249
250/* must hold timekeeper_lock */
251static void timekeeping_update(struct timekeeper *tk, unsigned int action)
252{
253 if (action & TK_CLEAR_NTP) {
254 tk->ntp_error = 0;
255 ntp_clear();
256 }
257 update_vsyscall(tk);
258 update_pvclock_gtod(tk, action & TK_CLOCK_WAS_SET);
259
260 if (action & TK_MIRROR)
261 memcpy(&shadow_timekeeper, &timekeeper, sizeof(timekeeper));
262}
263
264/**
265 * timekeeping_forward_now - update clock to the current time
266 *
267 * Forward the current clock to update its state since the last call to
268 * update_wall_time(). This is useful before significant clock changes,
269 * as it avoids having to deal with this time offset explicitly.
270 */
271static void timekeeping_forward_now(struct timekeeper *tk)
272{
273 cycle_t cycle_now, cycle_delta;
274 struct clocksource *clock;
275 s64 nsec;
276
277 clock = tk->clock;
278 cycle_now = clock->read(clock);
279 cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
280 tk->cycle_last = clock->cycle_last = cycle_now;
281
282 tk->xtime_nsec += cycle_delta * tk->mult;
283
284 /* If arch requires, add in get_arch_timeoffset() */
285 tk->xtime_nsec += (u64)get_arch_timeoffset() << tk->shift;
286
287 tk_normalize_xtime(tk);
288
289 nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
290 timespec_add_ns(&tk->raw_time, nsec);
291}
292
293/**
294 * __getnstimeofday - Returns the time of day in a timespec.
295 * @ts: pointer to the timespec to be set
296 *
297 * Updates the time of day in the timespec.
298 * Returns 0 on success, or -ve when suspended (timespec will be undefined).
299 */
300int __getnstimeofday(struct timespec *ts)
301{
302 struct timekeeper *tk = &timekeeper;
303 unsigned long seq;
304 s64 nsecs = 0;
305
306 do {
307 seq = read_seqcount_begin(&timekeeper_seq);
308
309 ts->tv_sec = tk->xtime_sec;
310 nsecs = timekeeping_get_ns(tk);
311
312 } while (read_seqcount_retry(&timekeeper_seq, seq));
313
314 ts->tv_nsec = 0;
315 timespec_add_ns(ts, nsecs);
316
317 /*
318 * Do not bail out early, in case there were callers still using
319 * the value, even in the face of the WARN_ON.
320 */
321 if (unlikely(timekeeping_suspended))
322 return -EAGAIN;
323 return 0;
324}
325EXPORT_SYMBOL(__getnstimeofday);
326
327/**
328 * getnstimeofday - Returns the time of day in a timespec.
329 * @ts: pointer to the timespec to be set
330 *
331 * Returns the time of day in a timespec (WARN if suspended).
332 */
333void getnstimeofday(struct timespec *ts)
334{
335 WARN_ON(__getnstimeofday(ts));
336}
337EXPORT_SYMBOL(getnstimeofday);
338
339ktime_t ktime_get(void)
340{
341 struct timekeeper *tk = &timekeeper;
342 unsigned int seq;
343 s64 secs, nsecs;
344
345 WARN_ON(timekeeping_suspended);
346
347 do {
348 seq = read_seqcount_begin(&timekeeper_seq);
349 secs = tk->xtime_sec + tk->wall_to_monotonic.tv_sec;
350 nsecs = timekeeping_get_ns(tk) + tk->wall_to_monotonic.tv_nsec;
351
352 } while (read_seqcount_retry(&timekeeper_seq, seq));
353 /*
354 * Use ktime_set/ktime_add_ns to create a proper ktime on
355 * 32-bit architectures without CONFIG_KTIME_SCALAR.
356 */
357 return ktime_add_ns(ktime_set(secs, 0), nsecs);
358}
359EXPORT_SYMBOL_GPL(ktime_get);
360
361/**
362 * ktime_get_ts - get the monotonic clock in timespec format
363 * @ts: pointer to timespec variable
364 *
365 * The function calculates the monotonic clock from the realtime
366 * clock and the wall_to_monotonic offset and stores the result
367 * in normalized timespec format in the variable pointed to by @ts.
368 */
369void ktime_get_ts(struct timespec *ts)
370{
371 struct timekeeper *tk = &timekeeper;
372 struct timespec tomono;
373 s64 nsec;
374 unsigned int seq;
375
376 WARN_ON(timekeeping_suspended);
377
378 do {
379 seq = read_seqcount_begin(&timekeeper_seq);
380 ts->tv_sec = tk->xtime_sec;
381 nsec = timekeeping_get_ns(tk);
382 tomono = tk->wall_to_monotonic;
383
384 } while (read_seqcount_retry(&timekeeper_seq, seq));
385
386 ts->tv_sec += tomono.tv_sec;
387 ts->tv_nsec = 0;
388 timespec_add_ns(ts, nsec + tomono.tv_nsec);
389}
390EXPORT_SYMBOL_GPL(ktime_get_ts);
391
392
393/**
394 * timekeeping_clocktai - Returns the TAI time of day in a timespec
395 * @ts: pointer to the timespec to be set
396 *
397 * Returns the time of day in a timespec.
398 */
399void timekeeping_clocktai(struct timespec *ts)
400{
401 struct timekeeper *tk = &timekeeper;
402 unsigned long seq;
403 u64 nsecs;
404
405 WARN_ON(timekeeping_suspended);
406
407 do {
408 seq = read_seqcount_begin(&timekeeper_seq);
409
410 ts->tv_sec = tk->xtime_sec + tk->tai_offset;
411 nsecs = timekeeping_get_ns(tk);
412
413 } while (read_seqcount_retry(&timekeeper_seq, seq));
414
415 ts->tv_nsec = 0;
416 timespec_add_ns(ts, nsecs);
417
418}
419EXPORT_SYMBOL(timekeeping_clocktai);
420
421
422/**
423 * ktime_get_clocktai - Returns the TAI time of day in a ktime
424 *
425 * Returns the time of day in a ktime.
426 */
427ktime_t ktime_get_clocktai(void)
428{
429 struct timespec ts;
430
431 timekeeping_clocktai(&ts);
432 return timespec_to_ktime(ts);
433}
434EXPORT_SYMBOL(ktime_get_clocktai);
435
436#ifdef CONFIG_NTP_PPS
437
438/**
439 * getnstime_raw_and_real - get day and raw monotonic time in timespec format
440 * @ts_raw: pointer to the timespec to be set to raw monotonic time
441 * @ts_real: pointer to the timespec to be set to the time of day
442 *
443 * This function reads both the time of day and raw monotonic time at the
444 * same time atomically and stores the resulting timestamps in timespec
445 * format.
446 */
447void getnstime_raw_and_real(struct timespec *ts_raw, struct timespec *ts_real)
448{
449 struct timekeeper *tk = &timekeeper;
450 unsigned long seq;
451 s64 nsecs_raw, nsecs_real;
452
453 WARN_ON_ONCE(timekeeping_suspended);
454
455 do {
456 seq = read_seqcount_begin(&timekeeper_seq);
457
458 *ts_raw = tk->raw_time;
459 ts_real->tv_sec = tk->xtime_sec;
460 ts_real->tv_nsec = 0;
461
462 nsecs_raw = timekeeping_get_ns_raw(tk);
463 nsecs_real = timekeeping_get_ns(tk);
464
465 } while (read_seqcount_retry(&timekeeper_seq, seq));
466
467 timespec_add_ns(ts_raw, nsecs_raw);
468 timespec_add_ns(ts_real, nsecs_real);
469}
470EXPORT_SYMBOL(getnstime_raw_and_real);
471
472#endif /* CONFIG_NTP_PPS */
473
474/**
475 * do_gettimeofday - Returns the time of day in a timeval
476 * @tv: pointer to the timeval to be set
477 *
478 * NOTE: Users should be converted to using getnstimeofday()
479 */
480void do_gettimeofday(struct timeval *tv)
481{
482 struct timespec now;
483
484 getnstimeofday(&now);
485 tv->tv_sec = now.tv_sec;
486 tv->tv_usec = now.tv_nsec/1000;
487}
488EXPORT_SYMBOL(do_gettimeofday);
489
490/**
491 * do_settimeofday - Sets the time of day
492 * @tv: pointer to the timespec variable containing the new time
493 *
494 * Sets the time of day to the new time and update NTP and notify hrtimers
495 */
496int do_settimeofday(const struct timespec *tv)
497{
498 struct timekeeper *tk = &timekeeper;
499 struct timespec ts_delta, xt;
500 unsigned long flags;
501
502 if (!timespec_valid_strict(tv))
503 return -EINVAL;
504
505 raw_spin_lock_irqsave(&timekeeper_lock, flags);
506 write_seqcount_begin(&timekeeper_seq);
507
508 timekeeping_forward_now(tk);
509
510 xt = tk_xtime(tk);
511 ts_delta.tv_sec = tv->tv_sec - xt.tv_sec;
512 ts_delta.tv_nsec = tv->tv_nsec - xt.tv_nsec;
513
514 tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, ts_delta));
515
516 tk_set_xtime(tk, tv);
517
518 timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);
519
520 write_seqcount_end(&timekeeper_seq);
521 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
522
523 /* signal hrtimers about time change */
524 clock_was_set();
525
526 return 0;
527}
528EXPORT_SYMBOL(do_settimeofday);
529
530/**
531 * timekeeping_inject_offset - Adds or subtracts from the current time.
532 * @tv: pointer to the timespec variable containing the offset
533 *
534 * Adds or subtracts an offset value from the current time.
535 */
536int timekeeping_inject_offset(struct timespec *ts)
537{
538 struct timekeeper *tk = &timekeeper;
539 unsigned long flags;
540 struct timespec tmp;
541 int ret = 0;
542
543 if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
544 return -EINVAL;
545
546 raw_spin_lock_irqsave(&timekeeper_lock, flags);
547 write_seqcount_begin(&timekeeper_seq);
548
549 timekeeping_forward_now(tk);
550
551 /* Make sure the proposed value is valid */
552 tmp = timespec_add(tk_xtime(tk), *ts);
553 if (!timespec_valid_strict(&tmp)) {
554 ret = -EINVAL;
555 goto error;
556 }
557
558 tk_xtime_add(tk, ts);
559 tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts));
560
561error: /* even if we error out, we forwarded the time, so call update */
562 timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);
563
564 write_seqcount_end(&timekeeper_seq);
565 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
566
567 /* signal hrtimers about time change */
568 clock_was_set();
569
570 return ret;
571}
572EXPORT_SYMBOL(timekeeping_inject_offset);
573
574
575/**
576 * timekeeping_get_tai_offset - Returns current TAI offset from UTC
577 *
578 */
579s32 timekeeping_get_tai_offset(void)
580{
581 struct timekeeper *tk = &timekeeper;
582 unsigned int seq;
583 s32 ret;
584
585 do {
586 seq = read_seqcount_begin(&timekeeper_seq);
587 ret = tk->tai_offset;
588 } while (read_seqcount_retry(&timekeeper_seq, seq));
589
590 return ret;
591}
592
593/**
594 * __timekeeping_set_tai_offset - Lock free worker function
595 *
596 */
597static void __timekeeping_set_tai_offset(struct timekeeper *tk, s32 tai_offset)
598{
599 tk->tai_offset = tai_offset;
600 tk->offs_tai = ktime_add(tk->offs_real, ktime_set(tai_offset, 0));
601}
602
603/**
604 * timekeeping_set_tai_offset - Sets the current TAI offset from UTC
605 *
606 */
607void timekeeping_set_tai_offset(s32 tai_offset)
608{
609 struct timekeeper *tk = &timekeeper;
610 unsigned long flags;
611
612 raw_spin_lock_irqsave(&timekeeper_lock, flags);
613 write_seqcount_begin(&timekeeper_seq);
614 __timekeeping_set_tai_offset(tk, tai_offset);
615 timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
616 write_seqcount_end(&timekeeper_seq);
617 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
618 clock_was_set();
619}
620
621/**
622 * change_clocksource - Swaps clocksources if a new one is available
623 *
624 * Accumulates current time interval and initializes new clocksource
625 */
626static int change_clocksource(void *data)
627{
628 struct timekeeper *tk = &timekeeper;
629 struct clocksource *new, *old;
630 unsigned long flags;
631
632 new = (struct clocksource *) data;
633
634 raw_spin_lock_irqsave(&timekeeper_lock, flags);
635 write_seqcount_begin(&timekeeper_seq);
636
637 timekeeping_forward_now(tk);
638 /*
639 * If the cs is in module, get a module reference. Succeeds
640 * for built-in code (owner == NULL) as well.
641 */
642 if (try_module_get(new->owner)) {
643 if (!new->enable || new->enable(new) == 0) {
644 old = tk->clock;
645 tk_setup_internals(tk, new);
646 if (old->disable)
647 old->disable(old);
648 module_put(old->owner);
649 } else {
650 module_put(new->owner);
651 }
652 }
653 timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);
654
655 write_seqcount_end(&timekeeper_seq);
656 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
657
658 return 0;
659}
660
661/**
662 * timekeeping_notify - Install a new clock source
663 * @clock: pointer to the clock source
664 *
665 * This function is called from clocksource.c after a new, better clock
666 * source has been registered. The caller holds the clocksource_mutex.
667 */
668int timekeeping_notify(struct clocksource *clock)
669{
670 struct timekeeper *tk = &timekeeper;
671
672 if (tk->clock == clock)
673 return 0;
674 stop_machine(change_clocksource, clock, NULL);
675 tick_clock_notify();
676 return tk->clock == clock ? 0 : -1;
677}
678
679/**
680 * ktime_get_real - get the real (wall-) time in ktime_t format
681 *
682 * returns the time in ktime_t format
683 */
684ktime_t ktime_get_real(void)
685{
686 struct timespec now;
687
688 getnstimeofday(&now);
689
690 return timespec_to_ktime(now);
691}
692EXPORT_SYMBOL_GPL(ktime_get_real);
693
694/**
695 * getrawmonotonic - Returns the raw monotonic time in a timespec
696 * @ts: pointer to the timespec to be set
697 *
698 * Returns the raw monotonic time (completely un-modified by ntp)
699 */
700void getrawmonotonic(struct timespec *ts)
701{
702 struct timekeeper *tk = &timekeeper;
703 unsigned long seq;
704 s64 nsecs;
705
706 do {
707 seq = read_seqcount_begin(&timekeeper_seq);
708 nsecs = timekeeping_get_ns_raw(tk);
709 *ts = tk->raw_time;
710
711 } while (read_seqcount_retry(&timekeeper_seq, seq));
712
713 timespec_add_ns(ts, nsecs);
714}
715EXPORT_SYMBOL(getrawmonotonic);
716
717/**
718 * timekeeping_valid_for_hres - Check if timekeeping is suitable for hres
719 */
720int timekeeping_valid_for_hres(void)
721{
722 struct timekeeper *tk = &timekeeper;
723 unsigned long seq;
724 int ret;
725
726 do {
727 seq = read_seqcount_begin(&timekeeper_seq);
728
729 ret = tk->clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
730
731 } while (read_seqcount_retry(&timekeeper_seq, seq));
732
733 return ret;
734}
735
736/**
737 * timekeeping_max_deferment - Returns max time the clocksource can be deferred
738 */
739u64 timekeeping_max_deferment(void)
740{
741 struct timekeeper *tk = &timekeeper;
742 unsigned long seq;
743 u64 ret;
744
745 do {
746 seq = read_seqcount_begin(&timekeeper_seq);
747
748 ret = tk->clock->max_idle_ns;
749
750 } while (read_seqcount_retry(&timekeeper_seq, seq));
751
752 return ret;
753}
754
755/**
756 * read_persistent_clock - Return time from the persistent clock.
757 *
758 * Weak dummy function for arches that do not yet support it.
759 * Reads the time from the battery backed persistent clock.
760 * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
761 *
762 * XXX - Do be sure to remove it once all arches implement it.
763 */
764void __weak read_persistent_clock(struct timespec *ts)
765{
766 ts->tv_sec = 0;
767 ts->tv_nsec = 0;
768}
769
770/**
771 * read_boot_clock - Return time of the system start.
772 *
773 * Weak dummy function for arches that do not yet support it.
774 * Function to read the exact time the system has been started.
775 * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
776 *
777 * XXX - Do be sure to remove it once all arches implement it.
778 */
779void __weak read_boot_clock(struct timespec *ts)
780{
781 ts->tv_sec = 0;
782 ts->tv_nsec = 0;
783}
784
785/*
786 * timekeeping_init - Initializes the clocksource and common timekeeping values
787 */
788void __init timekeeping_init(void)
789{
790 struct timekeeper *tk = &timekeeper;
791 struct clocksource *clock;
792 unsigned long flags;
793 struct timespec now, boot, tmp;
794
795 read_persistent_clock(&now);
796
797 if (!timespec_valid_strict(&now)) {
798 pr_warn("WARNING: Persistent clock returned invalid value!\n"
799 " Check your CMOS/BIOS settings.\n");
800 now.tv_sec = 0;
801 now.tv_nsec = 0;
802 } else if (now.tv_sec || now.tv_nsec)
803 persistent_clock_exist = true;
804
805 read_boot_clock(&boot);
806 if (!timespec_valid_strict(&boot)) {
807 pr_warn("WARNING: Boot clock returned invalid value!\n"
808 " Check your CMOS/BIOS settings.\n");
809 boot.tv_sec = 0;
810 boot.tv_nsec = 0;
811 }
812
813 raw_spin_lock_irqsave(&timekeeper_lock, flags);
814 write_seqcount_begin(&timekeeper_seq);
815 ntp_init();
816
817 clock = clocksource_default_clock();
818 if (clock->enable)
819 clock->enable(clock);
820 tk_setup_internals(tk, clock);
821
822 tk_set_xtime(tk, &now);
823 tk->raw_time.tv_sec = 0;
824 tk->raw_time.tv_nsec = 0;
825 if (boot.tv_sec == 0 && boot.tv_nsec == 0)
826 boot = tk_xtime(tk);
827
828 set_normalized_timespec(&tmp, -boot.tv_sec, -boot.tv_nsec);
829 tk_set_wall_to_mono(tk, tmp);
830
831 tmp.tv_sec = 0;
832 tmp.tv_nsec = 0;
833 tk_set_sleep_time(tk, tmp);
834
835 memcpy(&shadow_timekeeper, &timekeeper, sizeof(timekeeper));
836
837 write_seqcount_end(&timekeeper_seq);
838 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
839}
840
841/* time in seconds when suspend began */
842static struct timespec timekeeping_suspend_time;
843
844/**
845 * __timekeeping_inject_sleeptime - Internal function to add sleep interval
846 * @delta: pointer to a timespec delta value
847 *
848 * Takes a timespec offset measuring a suspend interval and properly
849 * adds the sleep offset to the timekeeping variables.
850 */
851static void __timekeeping_inject_sleeptime(struct timekeeper *tk,
852 struct timespec *delta)
853{
854 if (!timespec_valid_strict(delta)) {
855 printk(KERN_WARNING "__timekeeping_inject_sleeptime: Invalid "
856 "sleep delta value!\n");
857 return;
858 }
859 tk_xtime_add(tk, delta);
860 tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *delta));
861 tk_set_sleep_time(tk, timespec_add(tk->total_sleep_time, *delta));
862 tk_debug_account_sleep_time(delta);
863}
864
865/**
866 * timekeeping_inject_sleeptime - Adds suspend interval to timeekeeping values
867 * @delta: pointer to a timespec delta value
868 *
869 * This hook is for architectures that cannot support read_persistent_clock
870 * because their RTC/persistent clock is only accessible when irqs are enabled.
871 *
872 * This function should only be called by rtc_resume(), and allows
873 * a suspend offset to be injected into the timekeeping values.
874 */
875void timekeeping_inject_sleeptime(struct timespec *delta)
876{
877 struct timekeeper *tk = &timekeeper;
878 unsigned long flags;
879
880 /*
881 * Make sure we don't set the clock twice, as timekeeping_resume()
882 * already did it
883 */
884 if (has_persistent_clock())
885 return;
886
887 raw_spin_lock_irqsave(&timekeeper_lock, flags);
888 write_seqcount_begin(&timekeeper_seq);
889
890 timekeeping_forward_now(tk);
891
892 __timekeeping_inject_sleeptime(tk, delta);
893
894 timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);
895
896 write_seqcount_end(&timekeeper_seq);
897 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
898
899 /* signal hrtimers about time change */
900 clock_was_set();
901}
902
903/**
904 * timekeeping_resume - Resumes the generic timekeeping subsystem.
905 *
906 * This is for the generic clocksource timekeeping.
907 * xtime/wall_to_monotonic/jiffies/etc are
908 * still managed by arch specific suspend/resume code.
909 */
910static void timekeeping_resume(void)
911{
912 struct timekeeper *tk = &timekeeper;
913 struct clocksource *clock = tk->clock;
914 unsigned long flags;
915 struct timespec ts_new, ts_delta;
916 cycle_t cycle_now, cycle_delta;
917 bool suspendtime_found = false;
918
919 read_persistent_clock(&ts_new);
920
921 clockevents_resume();
922 clocksource_resume();
923
924 raw_spin_lock_irqsave(&timekeeper_lock, flags);
925 write_seqcount_begin(&timekeeper_seq);
926
927 /*
928 * After system resumes, we need to calculate the suspended time and
929 * compensate it for the OS time. There are 3 sources that could be
930 * used: Nonstop clocksource during suspend, persistent clock and rtc
931 * device.
932 *
933 * One specific platform may have 1 or 2 or all of them, and the
934 * preference will be:
935 * suspend-nonstop clocksource -> persistent clock -> rtc
936 * The less preferred source will only be tried if there is no better
937 * usable source. The rtc part is handled separately in rtc core code.
938 */
939 cycle_now = clock->read(clock);
940 if ((clock->flags & CLOCK_SOURCE_SUSPEND_NONSTOP) &&
941 cycle_now > clock->cycle_last) {
942 u64 num, max = ULLONG_MAX;
943 u32 mult = clock->mult;
944 u32 shift = clock->shift;
945 s64 nsec = 0;
946
947 cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
948
949 /*
950 * "cycle_delta * mutl" may cause 64 bits overflow, if the
951 * suspended time is too long. In that case we need do the
952 * 64 bits math carefully
953 */
954 do_div(max, mult);
955 if (cycle_delta > max) {
956 num = div64_u64(cycle_delta, max);
957 nsec = (((u64) max * mult) >> shift) * num;
958 cycle_delta -= num * max;
959 }
960 nsec += ((u64) cycle_delta * mult) >> shift;
961
962 ts_delta = ns_to_timespec(nsec);
963 suspendtime_found = true;
964 } else if (timespec_compare(&ts_new, &timekeeping_suspend_time) > 0) {
965 ts_delta = timespec_sub(ts_new, timekeeping_suspend_time);
966 suspendtime_found = true;
967 }
968
969 if (suspendtime_found)
970 __timekeeping_inject_sleeptime(tk, &ts_delta);
971
972 /* Re-base the last cycle value */
973 tk->cycle_last = clock->cycle_last = cycle_now;
974 tk->ntp_error = 0;
975 timekeeping_suspended = 0;
976 timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
977 write_seqcount_end(&timekeeper_seq);
978 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
979
980 touch_softlockup_watchdog();
981
982 clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL);
983
984 /* Resume hrtimers */
985 hrtimers_resume();
986}
987
988static int timekeeping_suspend(void)
989{
990 struct timekeeper *tk = &timekeeper;
991 unsigned long flags;
992 struct timespec delta, delta_delta;
993 static struct timespec old_delta;
994
995 read_persistent_clock(&timekeeping_suspend_time);
996
997 /*
998 * On some systems the persistent_clock can not be detected at
999 * timekeeping_init by its return value, so if we see a valid
1000 * value returned, update the persistent_clock_exists flag.
1001 */
1002 if (timekeeping_suspend_time.tv_sec || timekeeping_suspend_time.tv_nsec)
1003 persistent_clock_exist = true;
1004
1005 raw_spin_lock_irqsave(&timekeeper_lock, flags);
1006 write_seqcount_begin(&timekeeper_seq);
1007 timekeeping_forward_now(tk);
1008 timekeeping_suspended = 1;
1009
1010 /*
1011 * To avoid drift caused by repeated suspend/resumes,
1012 * which each can add ~1 second drift error,
1013 * try to compensate so the difference in system time
1014 * and persistent_clock time stays close to constant.
1015 */
1016 delta = timespec_sub(tk_xtime(tk), timekeeping_suspend_time);
1017 delta_delta = timespec_sub(delta, old_delta);
1018 if (abs(delta_delta.tv_sec) >= 2) {
1019 /*
1020 * if delta_delta is too large, assume time correction
1021 * has occured and set old_delta to the current delta.
1022 */
1023 old_delta = delta;
1024 } else {
1025 /* Otherwise try to adjust old_system to compensate */
1026 timekeeping_suspend_time =
1027 timespec_add(timekeeping_suspend_time, delta_delta);
1028 }
1029
1030 timekeeping_update(tk, TK_MIRROR);
1031 write_seqcount_end(&timekeeper_seq);
1032 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
1033
1034 clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
1035 clocksource_suspend();
1036 clockevents_suspend();
1037
1038 return 0;
1039}
1040
1041/* sysfs resume/suspend bits for timekeeping */
1042static struct syscore_ops timekeeping_syscore_ops = {
1043 .resume = timekeeping_resume,
1044 .suspend = timekeeping_suspend,
1045};
1046
1047static int __init timekeeping_init_ops(void)
1048{
1049 register_syscore_ops(&timekeeping_syscore_ops);
1050 return 0;
1051}
1052
1053device_initcall(timekeeping_init_ops);
1054
1055/*
1056 * If the error is already larger, we look ahead even further
1057 * to compensate for late or lost adjustments.
1058 */
1059static __always_inline int timekeeping_bigadjust(struct timekeeper *tk,
1060 s64 error, s64 *interval,
1061 s64 *offset)
1062{
1063 s64 tick_error, i;
1064 u32 look_ahead, adj;
1065 s32 error2, mult;
1066
1067 /*
1068 * Use the current error value to determine how much to look ahead.
1069 * The larger the error the slower we adjust for it to avoid problems
1070 * with losing too many ticks, otherwise we would overadjust and
1071 * produce an even larger error. The smaller the adjustment the
1072 * faster we try to adjust for it, as lost ticks can do less harm
1073 * here. This is tuned so that an error of about 1 msec is adjusted
1074 * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
1075 */
1076 error2 = tk->ntp_error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
1077 error2 = abs(error2);
1078 for (look_ahead = 0; error2 > 0; look_ahead++)
1079 error2 >>= 2;
1080
1081 /*
1082 * Now calculate the error in (1 << look_ahead) ticks, but first
1083 * remove the single look ahead already included in the error.
1084 */
1085 tick_error = ntp_tick_length() >> (tk->ntp_error_shift + 1);
1086 tick_error -= tk->xtime_interval >> 1;
1087 error = ((error - tick_error) >> look_ahead) + tick_error;
1088
1089 /* Finally calculate the adjustment shift value. */
1090 i = *interval;
1091 mult = 1;
1092 if (error < 0) {
1093 error = -error;
1094 *interval = -*interval;
1095 *offset = -*offset;
1096 mult = -1;
1097 }
1098 for (adj = 0; error > i; adj++)
1099 error >>= 1;
1100
1101 *interval <<= adj;
1102 *offset <<= adj;
1103 return mult << adj;
1104}
1105
1106/*
1107 * Adjust the multiplier to reduce the error value,
1108 * this is optimized for the most common adjustments of -1,0,1,
1109 * for other values we can do a bit more work.
1110 */
1111static void timekeeping_adjust(struct timekeeper *tk, s64 offset)
1112{
1113 s64 error, interval = tk->cycle_interval;
1114 int adj;
1115
1116 /*
1117 * The point of this is to check if the error is greater than half
1118 * an interval.
1119 *
1120 * First we shift it down from NTP_SHIFT to clocksource->shifted nsecs.
1121 *
1122 * Note we subtract one in the shift, so that error is really error*2.
1123 * This "saves" dividing(shifting) interval twice, but keeps the
1124 * (error > interval) comparison as still measuring if error is
1125 * larger than half an interval.
1126 *
1127 * Note: It does not "save" on aggravation when reading the code.
1128 */
1129 error = tk->ntp_error >> (tk->ntp_error_shift - 1);
1130 if (error > interval) {
1131 /*
1132 * We now divide error by 4(via shift), which checks if
1133 * the error is greater than twice the interval.
1134 * If it is greater, we need a bigadjust, if its smaller,
1135 * we can adjust by 1.
1136 */
1137 error >>= 2;
1138 if (likely(error <= interval))
1139 adj = 1;
1140 else
1141 adj = timekeeping_bigadjust(tk, error, &interval, &offset);
1142 } else {
1143 if (error < -interval) {
1144 /* See comment above, this is just switched for the negative */
1145 error >>= 2;
1146 if (likely(error >= -interval)) {
1147 adj = -1;
1148 interval = -interval;
1149 offset = -offset;
1150 } else {
1151 adj = timekeeping_bigadjust(tk, error, &interval, &offset);
1152 }
1153 } else {
1154 goto out_adjust;
1155 }
1156 }
1157
1158 if (unlikely(tk->clock->maxadj &&
1159 (tk->mult + adj > tk->clock->mult + tk->clock->maxadj))) {
1160 printk_once(KERN_WARNING
1161 "Adjusting %s more than 11%% (%ld vs %ld)\n",
1162 tk->clock->name, (long)tk->mult + adj,
1163 (long)tk->clock->mult + tk->clock->maxadj);
1164 }
1165 /*
1166 * So the following can be confusing.
1167 *
1168 * To keep things simple, lets assume adj == 1 for now.
1169 *
1170 * When adj != 1, remember that the interval and offset values
1171 * have been appropriately scaled so the math is the same.
1172 *
1173 * The basic idea here is that we're increasing the multiplier
1174 * by one, this causes the xtime_interval to be incremented by
1175 * one cycle_interval. This is because:
1176 * xtime_interval = cycle_interval * mult
1177 * So if mult is being incremented by one:
1178 * xtime_interval = cycle_interval * (mult + 1)
1179 * Its the same as:
1180 * xtime_interval = (cycle_interval * mult) + cycle_interval
1181 * Which can be shortened to:
1182 * xtime_interval += cycle_interval
1183 *
1184 * So offset stores the non-accumulated cycles. Thus the current
1185 * time (in shifted nanoseconds) is:
1186 * now = (offset * adj) + xtime_nsec
1187 * Now, even though we're adjusting the clock frequency, we have
1188 * to keep time consistent. In other words, we can't jump back
1189 * in time, and we also want to avoid jumping forward in time.
1190 *
1191 * So given the same offset value, we need the time to be the same
1192 * both before and after the freq adjustment.
1193 * now = (offset * adj_1) + xtime_nsec_1
1194 * now = (offset * adj_2) + xtime_nsec_2
1195 * So:
1196 * (offset * adj_1) + xtime_nsec_1 =
1197 * (offset * adj_2) + xtime_nsec_2
1198 * And we know:
1199 * adj_2 = adj_1 + 1
1200 * So:
1201 * (offset * adj_1) + xtime_nsec_1 =
1202 * (offset * (adj_1+1)) + xtime_nsec_2
1203 * (offset * adj_1) + xtime_nsec_1 =
1204 * (offset * adj_1) + offset + xtime_nsec_2
1205 * Canceling the sides:
1206 * xtime_nsec_1 = offset + xtime_nsec_2
1207 * Which gives us:
1208 * xtime_nsec_2 = xtime_nsec_1 - offset
1209 * Which simplfies to:
1210 * xtime_nsec -= offset
1211 *
1212 * XXX - TODO: Doc ntp_error calculation.
1213 */
1214 tk->mult += adj;
1215 tk->xtime_interval += interval;
1216 tk->xtime_nsec -= offset;
1217 tk->ntp_error -= (interval - offset) << tk->ntp_error_shift;
1218
1219out_adjust:
1220 /*
1221 * It may be possible that when we entered this function, xtime_nsec
1222 * was very small. Further, if we're slightly speeding the clocksource
1223 * in the code above, its possible the required corrective factor to
1224 * xtime_nsec could cause it to underflow.
1225 *
1226 * Now, since we already accumulated the second, cannot simply roll
1227 * the accumulated second back, since the NTP subsystem has been
1228 * notified via second_overflow. So instead we push xtime_nsec forward
1229 * by the amount we underflowed, and add that amount into the error.
1230 *
1231 * We'll correct this error next time through this function, when
1232 * xtime_nsec is not as small.
1233 */
1234 if (unlikely((s64)tk->xtime_nsec < 0)) {
1235 s64 neg = -(s64)tk->xtime_nsec;
1236 tk->xtime_nsec = 0;
1237 tk->ntp_error += neg << tk->ntp_error_shift;
1238 }
1239
1240}
1241
1242/**
1243 * accumulate_nsecs_to_secs - Accumulates nsecs into secs
1244 *
1245 * Helper function that accumulates a the nsecs greater then a second
1246 * from the xtime_nsec field to the xtime_secs field.
1247 * It also calls into the NTP code to handle leapsecond processing.
1248 *
1249 */
1250static inline unsigned int accumulate_nsecs_to_secs(struct timekeeper *tk)
1251{
1252 u64 nsecps = (u64)NSEC_PER_SEC << tk->shift;
1253 unsigned int clock_set = 0;
1254
1255 while (tk->xtime_nsec >= nsecps) {
1256 int leap;
1257
1258 tk->xtime_nsec -= nsecps;
1259 tk->xtime_sec++;
1260
1261 /* Figure out if its a leap sec and apply if needed */
1262 leap = second_overflow(tk->xtime_sec);
1263 if (unlikely(leap)) {
1264 struct timespec ts;
1265
1266 tk->xtime_sec += leap;
1267
1268 ts.tv_sec = leap;
1269 ts.tv_nsec = 0;
1270 tk_set_wall_to_mono(tk,
1271 timespec_sub(tk->wall_to_monotonic, ts));
1272
1273 __timekeeping_set_tai_offset(tk, tk->tai_offset - leap);
1274
1275 clock_set = TK_CLOCK_WAS_SET;
1276 }
1277 }
1278 return clock_set;
1279}
1280
1281/**
1282 * logarithmic_accumulation - shifted accumulation of cycles
1283 *
1284 * This functions accumulates a shifted interval of cycles into
1285 * into a shifted interval nanoseconds. Allows for O(log) accumulation
1286 * loop.
1287 *
1288 * Returns the unconsumed cycles.
1289 */
1290static cycle_t logarithmic_accumulation(struct timekeeper *tk, cycle_t offset,
1291 u32 shift,
1292 unsigned int *clock_set)
1293{
1294 cycle_t interval = tk->cycle_interval << shift;
1295 u64 raw_nsecs;
1296
1297 /* If the offset is smaller then a shifted interval, do nothing */
1298 if (offset < interval)
1299 return offset;
1300
1301 /* Accumulate one shifted interval */
1302 offset -= interval;
1303 tk->cycle_last += interval;
1304
1305 tk->xtime_nsec += tk->xtime_interval << shift;
1306 *clock_set |= accumulate_nsecs_to_secs(tk);
1307
1308 /* Accumulate raw time */
1309 raw_nsecs = (u64)tk->raw_interval << shift;
1310 raw_nsecs += tk->raw_time.tv_nsec;
1311 if (raw_nsecs >= NSEC_PER_SEC) {
1312 u64 raw_secs = raw_nsecs;
1313 raw_nsecs = do_div(raw_secs, NSEC_PER_SEC);
1314 tk->raw_time.tv_sec += raw_secs;
1315 }
1316 tk->raw_time.tv_nsec = raw_nsecs;
1317
1318 /* Accumulate error between NTP and clock interval */
1319 tk->ntp_error += ntp_tick_length() << shift;
1320 tk->ntp_error -= (tk->xtime_interval + tk->xtime_remainder) <<
1321 (tk->ntp_error_shift + shift);
1322
1323 return offset;
1324}
1325
1326#ifdef CONFIG_GENERIC_TIME_VSYSCALL_OLD
1327static inline void old_vsyscall_fixup(struct timekeeper *tk)
1328{
1329 s64 remainder;
1330
1331 /*
1332 * Store only full nanoseconds into xtime_nsec after rounding
1333 * it up and add the remainder to the error difference.
1334 * XXX - This is necessary to avoid small 1ns inconsistnecies caused
1335 * by truncating the remainder in vsyscalls. However, it causes
1336 * additional work to be done in timekeeping_adjust(). Once
1337 * the vsyscall implementations are converted to use xtime_nsec
1338 * (shifted nanoseconds), and CONFIG_GENERIC_TIME_VSYSCALL_OLD
1339 * users are removed, this can be killed.
1340 */
1341 remainder = tk->xtime_nsec & ((1ULL << tk->shift) - 1);
1342 tk->xtime_nsec -= remainder;
1343 tk->xtime_nsec += 1ULL << tk->shift;
1344 tk->ntp_error += remainder << tk->ntp_error_shift;
1345 tk->ntp_error -= (1ULL << tk->shift) << tk->ntp_error_shift;
1346}
1347#else
1348#define old_vsyscall_fixup(tk)
1349#endif
1350
1351
1352
1353/**
1354 * update_wall_time - Uses the current clocksource to increment the wall time
1355 *
1356 */
1357void update_wall_time(void)
1358{
1359 struct clocksource *clock;
1360 struct timekeeper *real_tk = &timekeeper;
1361 struct timekeeper *tk = &shadow_timekeeper;
1362 cycle_t offset;
1363 int shift = 0, maxshift;
1364 unsigned int clock_set = 0;
1365 unsigned long flags;
1366
1367 raw_spin_lock_irqsave(&timekeeper_lock, flags);
1368
1369 /* Make sure we're fully resumed: */
1370 if (unlikely(timekeeping_suspended))
1371 goto out;
1372
1373 clock = real_tk->clock;
1374
1375#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
1376 offset = real_tk->cycle_interval;
1377#else
1378 offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
1379#endif
1380
1381 /* Check if there's really nothing to do */
1382 if (offset < real_tk->cycle_interval)
1383 goto out;
1384
1385 /*
1386 * With NO_HZ we may have to accumulate many cycle_intervals
1387 * (think "ticks") worth of time at once. To do this efficiently,
1388 * we calculate the largest doubling multiple of cycle_intervals
1389 * that is smaller than the offset. We then accumulate that
1390 * chunk in one go, and then try to consume the next smaller
1391 * doubled multiple.
1392 */
1393 shift = ilog2(offset) - ilog2(tk->cycle_interval);
1394 shift = max(0, shift);
1395 /* Bound shift to one less than what overflows tick_length */
1396 maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
1397 shift = min(shift, maxshift);
1398 while (offset >= tk->cycle_interval) {
1399 offset = logarithmic_accumulation(tk, offset, shift,
1400 &clock_set);
1401 if (offset < tk->cycle_interval<<shift)
1402 shift--;
1403 }
1404
1405 /* correct the clock when NTP error is too big */
1406 timekeeping_adjust(tk, offset);
1407
1408 /*
1409 * XXX This can be killed once everyone converts
1410 * to the new update_vsyscall.
1411 */
1412 old_vsyscall_fixup(tk);
1413
1414 /*
1415 * Finally, make sure that after the rounding
1416 * xtime_nsec isn't larger than NSEC_PER_SEC
1417 */
1418 clock_set |= accumulate_nsecs_to_secs(tk);
1419
1420 write_seqcount_begin(&timekeeper_seq);
1421 /* Update clock->cycle_last with the new value */
1422 clock->cycle_last = tk->cycle_last;
1423 /*
1424 * Update the real timekeeper.
1425 *
1426 * We could avoid this memcpy by switching pointers, but that
1427 * requires changes to all other timekeeper usage sites as
1428 * well, i.e. move the timekeeper pointer getter into the
1429 * spinlocked/seqcount protected sections. And we trade this
1430 * memcpy under the timekeeper_seq against one before we start
1431 * updating.
1432 */
1433 memcpy(real_tk, tk, sizeof(*tk));
1434 timekeeping_update(real_tk, clock_set);
1435 write_seqcount_end(&timekeeper_seq);
1436out:
1437 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
1438 if (clock_set)
1439 /* Have to call _delayed version, since in irq context*/
1440 clock_was_set_delayed();
1441}
1442
1443/**
1444 * getboottime - Return the real time of system boot.
1445 * @ts: pointer to the timespec to be set
1446 *
1447 * Returns the wall-time of boot in a timespec.
1448 *
1449 * This is based on the wall_to_monotonic offset and the total suspend
1450 * time. Calls to settimeofday will affect the value returned (which
1451 * basically means that however wrong your real time clock is at boot time,
1452 * you get the right time here).
1453 */
1454void getboottime(struct timespec *ts)
1455{
1456 struct timekeeper *tk = &timekeeper;
1457 struct timespec boottime = {
1458 .tv_sec = tk->wall_to_monotonic.tv_sec +
1459 tk->total_sleep_time.tv_sec,
1460 .tv_nsec = tk->wall_to_monotonic.tv_nsec +
1461 tk->total_sleep_time.tv_nsec
1462 };
1463
1464 set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec);
1465}
1466EXPORT_SYMBOL_GPL(getboottime);
1467
1468/**
1469 * get_monotonic_boottime - Returns monotonic time since boot
1470 * @ts: pointer to the timespec to be set
1471 *
1472 * Returns the monotonic time since boot in a timespec.
1473 *
1474 * This is similar to CLOCK_MONTONIC/ktime_get_ts, but also
1475 * includes the time spent in suspend.
1476 */
1477void get_monotonic_boottime(struct timespec *ts)
1478{
1479 struct timekeeper *tk = &timekeeper;
1480 struct timespec tomono, sleep;
1481 s64 nsec;
1482 unsigned int seq;
1483
1484 WARN_ON(timekeeping_suspended);
1485
1486 do {
1487 seq = read_seqcount_begin(&timekeeper_seq);
1488 ts->tv_sec = tk->xtime_sec;
1489 nsec = timekeeping_get_ns(tk);
1490 tomono = tk->wall_to_monotonic;
1491 sleep = tk->total_sleep_time;
1492
1493 } while (read_seqcount_retry(&timekeeper_seq, seq));
1494
1495 ts->tv_sec += tomono.tv_sec + sleep.tv_sec;
1496 ts->tv_nsec = 0;
1497 timespec_add_ns(ts, nsec + tomono.tv_nsec + sleep.tv_nsec);
1498}
1499EXPORT_SYMBOL_GPL(get_monotonic_boottime);
1500
1501/**
1502 * ktime_get_boottime - Returns monotonic time since boot in a ktime
1503 *
1504 * Returns the monotonic time since boot in a ktime
1505 *
1506 * This is similar to CLOCK_MONTONIC/ktime_get, but also
1507 * includes the time spent in suspend.
1508 */
1509ktime_t ktime_get_boottime(void)
1510{
1511 struct timespec ts;
1512
1513 get_monotonic_boottime(&ts);
1514 return timespec_to_ktime(ts);
1515}
1516EXPORT_SYMBOL_GPL(ktime_get_boottime);
1517
1518/**
1519 * monotonic_to_bootbased - Convert the monotonic time to boot based.
1520 * @ts: pointer to the timespec to be converted
1521 */
1522void monotonic_to_bootbased(struct timespec *ts)
1523{
1524 struct timekeeper *tk = &timekeeper;
1525
1526 *ts = timespec_add(*ts, tk->total_sleep_time);
1527}
1528EXPORT_SYMBOL_GPL(monotonic_to_bootbased);
1529
1530unsigned long get_seconds(void)
1531{
1532 struct timekeeper *tk = &timekeeper;
1533
1534 return tk->xtime_sec;
1535}
1536EXPORT_SYMBOL(get_seconds);
1537
1538struct timespec __current_kernel_time(void)
1539{
1540 struct timekeeper *tk = &timekeeper;
1541
1542 return tk_xtime(tk);
1543}
1544
1545struct timespec current_kernel_time(void)
1546{
1547 struct timekeeper *tk = &timekeeper;
1548 struct timespec now;
1549 unsigned long seq;
1550
1551 do {
1552 seq = read_seqcount_begin(&timekeeper_seq);
1553
1554 now = tk_xtime(tk);
1555 } while (read_seqcount_retry(&timekeeper_seq, seq));
1556
1557 return now;
1558}
1559EXPORT_SYMBOL(current_kernel_time);
1560
1561struct timespec get_monotonic_coarse(void)
1562{
1563 struct timekeeper *tk = &timekeeper;
1564 struct timespec now, mono;
1565 unsigned long seq;
1566
1567 do {
1568 seq = read_seqcount_begin(&timekeeper_seq);
1569
1570 now = tk_xtime(tk);
1571 mono = tk->wall_to_monotonic;
1572 } while (read_seqcount_retry(&timekeeper_seq, seq));
1573
1574 set_normalized_timespec(&now, now.tv_sec + mono.tv_sec,
1575 now.tv_nsec + mono.tv_nsec);
1576 return now;
1577}
1578
1579/*
1580 * Must hold jiffies_lock
1581 */
1582void do_timer(unsigned long ticks)
1583{
1584 jiffies_64 += ticks;
1585 calc_global_load(ticks);
1586}
1587
1588/**
1589 * get_xtime_and_monotonic_and_sleep_offset() - get xtime, wall_to_monotonic,
1590 * and sleep offsets.
1591 * @xtim: pointer to timespec to be set with xtime
1592 * @wtom: pointer to timespec to be set with wall_to_monotonic
1593 * @sleep: pointer to timespec to be set with time in suspend
1594 */
1595void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim,
1596 struct timespec *wtom, struct timespec *sleep)
1597{
1598 struct timekeeper *tk = &timekeeper;
1599 unsigned long seq;
1600
1601 do {
1602 seq = read_seqcount_begin(&timekeeper_seq);
1603 *xtim = tk_xtime(tk);
1604 *wtom = tk->wall_to_monotonic;
1605 *sleep = tk->total_sleep_time;
1606 } while (read_seqcount_retry(&timekeeper_seq, seq));
1607}
1608
1609#ifdef CONFIG_HIGH_RES_TIMERS
1610/**
1611 * ktime_get_update_offsets - hrtimer helper
1612 * @offs_real: pointer to storage for monotonic -> realtime offset
1613 * @offs_boot: pointer to storage for monotonic -> boottime offset
1614 * @offs_tai: pointer to storage for monotonic -> clock tai offset
1615 *
1616 * Returns current monotonic time and updates the offsets
1617 * Called from hrtimer_interrupt() or retrigger_next_event()
1618 */
1619ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot,
1620 ktime_t *offs_tai)
1621{
1622 struct timekeeper *tk = &timekeeper;
1623 ktime_t now;
1624 unsigned int seq;
1625 u64 secs, nsecs;
1626
1627 do {
1628 seq = read_seqcount_begin(&timekeeper_seq);
1629
1630 secs = tk->xtime_sec;
1631 nsecs = timekeeping_get_ns(tk);
1632
1633 *offs_real = tk->offs_real;
1634 *offs_boot = tk->offs_boot;
1635 *offs_tai = tk->offs_tai;
1636 } while (read_seqcount_retry(&timekeeper_seq, seq));
1637
1638 now = ktime_add_ns(ktime_set(secs, 0), nsecs);
1639 now = ktime_sub(now, *offs_real);
1640 return now;
1641}
1642#endif
1643
1644/**
1645 * ktime_get_monotonic_offset() - get wall_to_monotonic in ktime_t format
1646 */
1647ktime_t ktime_get_monotonic_offset(void)
1648{
1649 struct timekeeper *tk = &timekeeper;
1650 unsigned long seq;
1651 struct timespec wtom;
1652
1653 do {
1654 seq = read_seqcount_begin(&timekeeper_seq);
1655 wtom = tk->wall_to_monotonic;
1656 } while (read_seqcount_retry(&timekeeper_seq, seq));
1657
1658 return timespec_to_ktime(wtom);
1659}
1660EXPORT_SYMBOL_GPL(ktime_get_monotonic_offset);
1661
1662/**
1663 * do_adjtimex() - Accessor function to NTP __do_adjtimex function
1664 */
1665int do_adjtimex(struct timex *txc)
1666{
1667 struct timekeeper *tk = &timekeeper;
1668 unsigned long flags;
1669 struct timespec ts;
1670 s32 orig_tai, tai;
1671 int ret;
1672
1673 /* Validate the data before disabling interrupts */
1674 ret = ntp_validate_timex(txc);
1675 if (ret)
1676 return ret;
1677
1678 if (txc->modes & ADJ_SETOFFSET) {
1679 struct timespec delta;
1680 delta.tv_sec = txc->time.tv_sec;
1681 delta.tv_nsec = txc->time.tv_usec;
1682 if (!(txc->modes & ADJ_NANO))
1683 delta.tv_nsec *= 1000;
1684 ret = timekeeping_inject_offset(&delta);
1685 if (ret)
1686 return ret;
1687 }
1688
1689 getnstimeofday(&ts);
1690
1691 raw_spin_lock_irqsave(&timekeeper_lock, flags);
1692 write_seqcount_begin(&timekeeper_seq);
1693
1694 orig_tai = tai = tk->tai_offset;
1695 ret = __do_adjtimex(txc, &ts, &tai);
1696
1697 if (tai != orig_tai) {
1698 __timekeeping_set_tai_offset(tk, tai);
1699 timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
1700 }
1701 write_seqcount_end(&timekeeper_seq);
1702 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
1703
1704 if (tai != orig_tai)
1705 clock_was_set();
1706
1707 ntp_notify_cmos_timer();
1708
1709 return ret;
1710}
1711
1712#ifdef CONFIG_NTP_PPS
1713/**
1714 * hardpps() - Accessor function to NTP __hardpps function
1715 */
1716void hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts)
1717{
1718 unsigned long flags;
1719
1720 raw_spin_lock_irqsave(&timekeeper_lock, flags);
1721 write_seqcount_begin(&timekeeper_seq);
1722
1723 __hardpps(phase_ts, raw_ts);
1724
1725 write_seqcount_end(&timekeeper_seq);
1726 raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
1727}
1728EXPORT_SYMBOL(hardpps);
1729#endif
1730
1731/**
1732 * xtime_update() - advances the timekeeping infrastructure
1733 * @ticks: number of ticks, that have elapsed since the last call.
1734 *
1735 * Must be called with interrupts disabled.
1736 */
1737void xtime_update(unsigned long ticks)
1738{
1739 write_seqlock(&jiffies_lock);
1740 do_timer(ticks);
1741 write_sequnlock(&jiffies_lock);
1742 update_wall_time();
1743}
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Kernel timekeeping code and accessor functions. Based on code from
4 * timer.c, moved in commit 8524070b7982.
5 */
6#include <linux/timekeeper_internal.h>
7#include <linux/module.h>
8#include <linux/interrupt.h>
9#include <linux/percpu.h>
10#include <linux/init.h>
11#include <linux/mm.h>
12#include <linux/nmi.h>
13#include <linux/sched.h>
14#include <linux/sched/loadavg.h>
15#include <linux/sched/clock.h>
16#include <linux/syscore_ops.h>
17#include <linux/clocksource.h>
18#include <linux/jiffies.h>
19#include <linux/time.h>
20#include <linux/timex.h>
21#include <linux/tick.h>
22#include <linux/stop_machine.h>
23#include <linux/pvclock_gtod.h>
24#include <linux/compiler.h>
25#include <linux/audit.h>
26#include <linux/random.h>
27
28#include "tick-internal.h"
29#include "ntp_internal.h"
30#include "timekeeping_internal.h"
31
32#define TK_CLEAR_NTP (1 << 0)
33#define TK_CLOCK_WAS_SET (1 << 1)
34
35#define TK_UPDATE_ALL (TK_CLEAR_NTP | TK_CLOCK_WAS_SET)
36
37enum timekeeping_adv_mode {
38 /* Update timekeeper when a tick has passed */
39 TK_ADV_TICK,
40
41 /* Update timekeeper on a direct frequency change */
42 TK_ADV_FREQ
43};
44
45/*
46 * The most important data for readout fits into a single 64 byte
47 * cache line.
48 */
49struct tk_data {
50 seqcount_raw_spinlock_t seq;
51 struct timekeeper timekeeper;
52 struct timekeeper shadow_timekeeper;
53 raw_spinlock_t lock;
54} ____cacheline_aligned;
55
56static struct tk_data tk_core;
57
58/* flag for if timekeeping is suspended */
59int __read_mostly timekeeping_suspended;
60
61/**
62 * struct tk_fast - NMI safe timekeeper
63 * @seq: Sequence counter for protecting updates. The lowest bit
64 * is the index for the tk_read_base array
65 * @base: tk_read_base array. Access is indexed by the lowest bit of
66 * @seq.
67 *
68 * See @update_fast_timekeeper() below.
69 */
70struct tk_fast {
71 seqcount_latch_t seq;
72 struct tk_read_base base[2];
73};
74
75/* Suspend-time cycles value for halted fast timekeeper. */
76static u64 cycles_at_suspend;
77
78static u64 dummy_clock_read(struct clocksource *cs)
79{
80 if (timekeeping_suspended)
81 return cycles_at_suspend;
82 return local_clock();
83}
84
85static struct clocksource dummy_clock = {
86 .read = dummy_clock_read,
87};
88
89/*
90 * Boot time initialization which allows local_clock() to be utilized
91 * during early boot when clocksources are not available. local_clock()
92 * returns nanoseconds already so no conversion is required, hence mult=1
93 * and shift=0. When the first proper clocksource is installed then
94 * the fast time keepers are updated with the correct values.
95 */
96#define FAST_TK_INIT \
97 { \
98 .clock = &dummy_clock, \
99 .mask = CLOCKSOURCE_MASK(64), \
100 .mult = 1, \
101 .shift = 0, \
102 }
103
104static struct tk_fast tk_fast_mono ____cacheline_aligned = {
105 .seq = SEQCNT_LATCH_ZERO(tk_fast_mono.seq),
106 .base[0] = FAST_TK_INIT,
107 .base[1] = FAST_TK_INIT,
108};
109
110static struct tk_fast tk_fast_raw ____cacheline_aligned = {
111 .seq = SEQCNT_LATCH_ZERO(tk_fast_raw.seq),
112 .base[0] = FAST_TK_INIT,
113 .base[1] = FAST_TK_INIT,
114};
115
116unsigned long timekeeper_lock_irqsave(void)
117{
118 unsigned long flags;
119
120 raw_spin_lock_irqsave(&tk_core.lock, flags);
121 return flags;
122}
123
124void timekeeper_unlock_irqrestore(unsigned long flags)
125{
126 raw_spin_unlock_irqrestore(&tk_core.lock, flags);
127}
128
129/*
130 * Multigrain timestamps require tracking the latest fine-grained timestamp
131 * that has been issued, and never returning a coarse-grained timestamp that is
132 * earlier than that value.
133 *
134 * mg_floor represents the latest fine-grained time that has been handed out as
135 * a file timestamp on the system. This is tracked as a monotonic ktime_t, and
136 * converted to a realtime clock value on an as-needed basis.
137 *
138 * Maintaining mg_floor ensures the multigrain interfaces never issue a
139 * timestamp earlier than one that has been previously issued.
140 *
141 * The exception to this rule is when there is a backward realtime clock jump. If
142 * such an event occurs, a timestamp can appear to be earlier than a previous one.
143 */
144static __cacheline_aligned_in_smp atomic64_t mg_floor;
145
146static inline void tk_normalize_xtime(struct timekeeper *tk)
147{
148 while (tk->tkr_mono.xtime_nsec >= ((u64)NSEC_PER_SEC << tk->tkr_mono.shift)) {
149 tk->tkr_mono.xtime_nsec -= (u64)NSEC_PER_SEC << tk->tkr_mono.shift;
150 tk->xtime_sec++;
151 }
152 while (tk->tkr_raw.xtime_nsec >= ((u64)NSEC_PER_SEC << tk->tkr_raw.shift)) {
153 tk->tkr_raw.xtime_nsec -= (u64)NSEC_PER_SEC << tk->tkr_raw.shift;
154 tk->raw_sec++;
155 }
156}
157
158static inline struct timespec64 tk_xtime(const struct timekeeper *tk)
159{
160 struct timespec64 ts;
161
162 ts.tv_sec = tk->xtime_sec;
163 ts.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
164 return ts;
165}
166
167static void tk_set_xtime(struct timekeeper *tk, const struct timespec64 *ts)
168{
169 tk->xtime_sec = ts->tv_sec;
170 tk->tkr_mono.xtime_nsec = (u64)ts->tv_nsec << tk->tkr_mono.shift;
171}
172
173static void tk_xtime_add(struct timekeeper *tk, const struct timespec64 *ts)
174{
175 tk->xtime_sec += ts->tv_sec;
176 tk->tkr_mono.xtime_nsec += (u64)ts->tv_nsec << tk->tkr_mono.shift;
177 tk_normalize_xtime(tk);
178}
179
180static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec64 wtm)
181{
182 struct timespec64 tmp;
183
184 /*
185 * Verify consistency of: offset_real = -wall_to_monotonic
186 * before modifying anything
187 */
188 set_normalized_timespec64(&tmp, -tk->wall_to_monotonic.tv_sec,
189 -tk->wall_to_monotonic.tv_nsec);
190 WARN_ON_ONCE(tk->offs_real != timespec64_to_ktime(tmp));
191 tk->wall_to_monotonic = wtm;
192 set_normalized_timespec64(&tmp, -wtm.tv_sec, -wtm.tv_nsec);
193 /* Paired with READ_ONCE() in ktime_mono_to_any() */
194 WRITE_ONCE(tk->offs_real, timespec64_to_ktime(tmp));
195 WRITE_ONCE(tk->offs_tai, ktime_add(tk->offs_real, ktime_set(tk->tai_offset, 0)));
196}
197
198static inline void tk_update_sleep_time(struct timekeeper *tk, ktime_t delta)
199{
200 /* Paired with READ_ONCE() in ktime_mono_to_any() */
201 WRITE_ONCE(tk->offs_boot, ktime_add(tk->offs_boot, delta));
202 /*
203 * Timespec representation for VDSO update to avoid 64bit division
204 * on every update.
205 */
206 tk->monotonic_to_boot = ktime_to_timespec64(tk->offs_boot);
207}
208
209/*
210 * tk_clock_read - atomic clocksource read() helper
211 *
212 * This helper is necessary to use in the read paths because, while the
213 * seqcount ensures we don't return a bad value while structures are updated,
214 * it doesn't protect from potential crashes. There is the possibility that
215 * the tkr's clocksource may change between the read reference, and the
216 * clock reference passed to the read function. This can cause crashes if
217 * the wrong clocksource is passed to the wrong read function.
218 * This isn't necessary to use when holding the tk_core.lock or doing
219 * a read of the fast-timekeeper tkrs (which is protected by its own locking
220 * and update logic).
221 */
222static inline u64 tk_clock_read(const struct tk_read_base *tkr)
223{
224 struct clocksource *clock = READ_ONCE(tkr->clock);
225
226 return clock->read(clock);
227}
228
229/**
230 * tk_setup_internals - Set up internals to use clocksource clock.
231 *
232 * @tk: The target timekeeper to setup.
233 * @clock: Pointer to clocksource.
234 *
235 * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
236 * pair and interval request.
237 *
238 * Unless you're the timekeeping code, you should not be using this!
239 */
240static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
241{
242 u64 interval;
243 u64 tmp, ntpinterval;
244 struct clocksource *old_clock;
245
246 ++tk->cs_was_changed_seq;
247 old_clock = tk->tkr_mono.clock;
248 tk->tkr_mono.clock = clock;
249 tk->tkr_mono.mask = clock->mask;
250 tk->tkr_mono.cycle_last = tk_clock_read(&tk->tkr_mono);
251
252 tk->tkr_raw.clock = clock;
253 tk->tkr_raw.mask = clock->mask;
254 tk->tkr_raw.cycle_last = tk->tkr_mono.cycle_last;
255
256 /* Do the ns -> cycle conversion first, using original mult */
257 tmp = NTP_INTERVAL_LENGTH;
258 tmp <<= clock->shift;
259 ntpinterval = tmp;
260 tmp += clock->mult/2;
261 do_div(tmp, clock->mult);
262 if (tmp == 0)
263 tmp = 1;
264
265 interval = (u64) tmp;
266 tk->cycle_interval = interval;
267
268 /* Go back from cycles -> shifted ns */
269 tk->xtime_interval = interval * clock->mult;
270 tk->xtime_remainder = ntpinterval - tk->xtime_interval;
271 tk->raw_interval = interval * clock->mult;
272
273 /* if changing clocks, convert xtime_nsec shift units */
274 if (old_clock) {
275 int shift_change = clock->shift - old_clock->shift;
276 if (shift_change < 0) {
277 tk->tkr_mono.xtime_nsec >>= -shift_change;
278 tk->tkr_raw.xtime_nsec >>= -shift_change;
279 } else {
280 tk->tkr_mono.xtime_nsec <<= shift_change;
281 tk->tkr_raw.xtime_nsec <<= shift_change;
282 }
283 }
284
285 tk->tkr_mono.shift = clock->shift;
286 tk->tkr_raw.shift = clock->shift;
287
288 tk->ntp_error = 0;
289 tk->ntp_error_shift = NTP_SCALE_SHIFT - clock->shift;
290 tk->ntp_tick = ntpinterval << tk->ntp_error_shift;
291
292 /*
293 * The timekeeper keeps its own mult values for the currently
294 * active clocksource. These value will be adjusted via NTP
295 * to counteract clock drifting.
296 */
297 tk->tkr_mono.mult = clock->mult;
298 tk->tkr_raw.mult = clock->mult;
299 tk->ntp_err_mult = 0;
300 tk->skip_second_overflow = 0;
301}
302
303/* Timekeeper helper functions. */
304static noinline u64 delta_to_ns_safe(const struct tk_read_base *tkr, u64 delta)
305{
306 return mul_u64_u32_add_u64_shr(delta, tkr->mult, tkr->xtime_nsec, tkr->shift);
307}
308
309static inline u64 timekeeping_cycles_to_ns(const struct tk_read_base *tkr, u64 cycles)
310{
311 /* Calculate the delta since the last update_wall_time() */
312 u64 mask = tkr->mask, delta = (cycles - tkr->cycle_last) & mask;
313
314 /*
315 * This detects both negative motion and the case where the delta
316 * overflows the multiplication with tkr->mult.
317 */
318 if (unlikely(delta > tkr->clock->max_cycles)) {
319 /*
320 * Handle clocksource inconsistency between CPUs to prevent
321 * time from going backwards by checking for the MSB of the
322 * mask being set in the delta.
323 */
324 if (delta & ~(mask >> 1))
325 return tkr->xtime_nsec >> tkr->shift;
326
327 return delta_to_ns_safe(tkr, delta);
328 }
329
330 return ((delta * tkr->mult) + tkr->xtime_nsec) >> tkr->shift;
331}
332
333static __always_inline u64 timekeeping_get_ns(const struct tk_read_base *tkr)
334{
335 return timekeeping_cycles_to_ns(tkr, tk_clock_read(tkr));
336}
337
338/**
339 * update_fast_timekeeper - Update the fast and NMI safe monotonic timekeeper.
340 * @tkr: Timekeeping readout base from which we take the update
341 * @tkf: Pointer to NMI safe timekeeper
342 *
343 * We want to use this from any context including NMI and tracing /
344 * instrumenting the timekeeping code itself.
345 *
346 * Employ the latch technique; see @write_seqcount_latch.
347 *
348 * So if a NMI hits the update of base[0] then it will use base[1]
349 * which is still consistent. In the worst case this can result is a
350 * slightly wrong timestamp (a few nanoseconds). See
351 * @ktime_get_mono_fast_ns.
352 */
353static void update_fast_timekeeper(const struct tk_read_base *tkr,
354 struct tk_fast *tkf)
355{
356 struct tk_read_base *base = tkf->base;
357
358 /* Force readers off to base[1] */
359 write_seqcount_latch_begin(&tkf->seq);
360
361 /* Update base[0] */
362 memcpy(base, tkr, sizeof(*base));
363
364 /* Force readers back to base[0] */
365 write_seqcount_latch(&tkf->seq);
366
367 /* Update base[1] */
368 memcpy(base + 1, base, sizeof(*base));
369
370 write_seqcount_latch_end(&tkf->seq);
371}
372
373static __always_inline u64 __ktime_get_fast_ns(struct tk_fast *tkf)
374{
375 struct tk_read_base *tkr;
376 unsigned int seq;
377 u64 now;
378
379 do {
380 seq = read_seqcount_latch(&tkf->seq);
381 tkr = tkf->base + (seq & 0x01);
382 now = ktime_to_ns(tkr->base);
383 now += timekeeping_get_ns(tkr);
384 } while (read_seqcount_latch_retry(&tkf->seq, seq));
385
386 return now;
387}
388
389/**
390 * ktime_get_mono_fast_ns - Fast NMI safe access to clock monotonic
391 *
392 * This timestamp is not guaranteed to be monotonic across an update.
393 * The timestamp is calculated by:
394 *
395 * now = base_mono + clock_delta * slope
396 *
397 * So if the update lowers the slope, readers who are forced to the
398 * not yet updated second array are still using the old steeper slope.
399 *
400 * tmono
401 * ^
402 * | o n
403 * | o n
404 * | u
405 * | o
406 * |o
407 * |12345678---> reader order
408 *
409 * o = old slope
410 * u = update
411 * n = new slope
412 *
413 * So reader 6 will observe time going backwards versus reader 5.
414 *
415 * While other CPUs are likely to be able to observe that, the only way
416 * for a CPU local observation is when an NMI hits in the middle of
417 * the update. Timestamps taken from that NMI context might be ahead
418 * of the following timestamps. Callers need to be aware of that and
419 * deal with it.
420 */
421u64 notrace ktime_get_mono_fast_ns(void)
422{
423 return __ktime_get_fast_ns(&tk_fast_mono);
424}
425EXPORT_SYMBOL_GPL(ktime_get_mono_fast_ns);
426
427/**
428 * ktime_get_raw_fast_ns - Fast NMI safe access to clock monotonic raw
429 *
430 * Contrary to ktime_get_mono_fast_ns() this is always correct because the
431 * conversion factor is not affected by NTP/PTP correction.
432 */
433u64 notrace ktime_get_raw_fast_ns(void)
434{
435 return __ktime_get_fast_ns(&tk_fast_raw);
436}
437EXPORT_SYMBOL_GPL(ktime_get_raw_fast_ns);
438
439/**
440 * ktime_get_boot_fast_ns - NMI safe and fast access to boot clock.
441 *
442 * To keep it NMI safe since we're accessing from tracing, we're not using a
443 * separate timekeeper with updates to monotonic clock and boot offset
444 * protected with seqcounts. This has the following minor side effects:
445 *
446 * (1) Its possible that a timestamp be taken after the boot offset is updated
447 * but before the timekeeper is updated. If this happens, the new boot offset
448 * is added to the old timekeeping making the clock appear to update slightly
449 * earlier:
450 * CPU 0 CPU 1
451 * timekeeping_inject_sleeptime64()
452 * __timekeeping_inject_sleeptime(tk, delta);
453 * timestamp();
454 * timekeeping_update_staged(tkd, TK_CLEAR_NTP...);
455 *
456 * (2) On 32-bit systems, the 64-bit boot offset (tk->offs_boot) may be
457 * partially updated. Since the tk->offs_boot update is a rare event, this
458 * should be a rare occurrence which postprocessing should be able to handle.
459 *
460 * The caveats vs. timestamp ordering as documented for ktime_get_mono_fast_ns()
461 * apply as well.
462 */
463u64 notrace ktime_get_boot_fast_ns(void)
464{
465 struct timekeeper *tk = &tk_core.timekeeper;
466
467 return (ktime_get_mono_fast_ns() + ktime_to_ns(data_race(tk->offs_boot)));
468}
469EXPORT_SYMBOL_GPL(ktime_get_boot_fast_ns);
470
471/**
472 * ktime_get_tai_fast_ns - NMI safe and fast access to tai clock.
473 *
474 * The same limitations as described for ktime_get_boot_fast_ns() apply. The
475 * mono time and the TAI offset are not read atomically which may yield wrong
476 * readouts. However, an update of the TAI offset is an rare event e.g., caused
477 * by settime or adjtimex with an offset. The user of this function has to deal
478 * with the possibility of wrong timestamps in post processing.
479 */
480u64 notrace ktime_get_tai_fast_ns(void)
481{
482 struct timekeeper *tk = &tk_core.timekeeper;
483
484 return (ktime_get_mono_fast_ns() + ktime_to_ns(data_race(tk->offs_tai)));
485}
486EXPORT_SYMBOL_GPL(ktime_get_tai_fast_ns);
487
488static __always_inline u64 __ktime_get_real_fast(struct tk_fast *tkf, u64 *mono)
489{
490 struct tk_read_base *tkr;
491 u64 basem, baser, delta;
492 unsigned int seq;
493
494 do {
495 seq = raw_read_seqcount_latch(&tkf->seq);
496 tkr = tkf->base + (seq & 0x01);
497 basem = ktime_to_ns(tkr->base);
498 baser = ktime_to_ns(tkr->base_real);
499 delta = timekeeping_get_ns(tkr);
500 } while (raw_read_seqcount_latch_retry(&tkf->seq, seq));
501
502 if (mono)
503 *mono = basem + delta;
504 return baser + delta;
505}
506
507/**
508 * ktime_get_real_fast_ns: - NMI safe and fast access to clock realtime.
509 *
510 * See ktime_get_mono_fast_ns() for documentation of the time stamp ordering.
511 */
512u64 ktime_get_real_fast_ns(void)
513{
514 return __ktime_get_real_fast(&tk_fast_mono, NULL);
515}
516EXPORT_SYMBOL_GPL(ktime_get_real_fast_ns);
517
518/**
519 * ktime_get_fast_timestamps: - NMI safe timestamps
520 * @snapshot: Pointer to timestamp storage
521 *
522 * Stores clock monotonic, boottime and realtime timestamps.
523 *
524 * Boot time is a racy access on 32bit systems if the sleep time injection
525 * happens late during resume and not in timekeeping_resume(). That could
526 * be avoided by expanding struct tk_read_base with boot offset for 32bit
527 * and adding more overhead to the update. As this is a hard to observe
528 * once per resume event which can be filtered with reasonable effort using
529 * the accurate mono/real timestamps, it's probably not worth the trouble.
530 *
531 * Aside of that it might be possible on 32 and 64 bit to observe the
532 * following when the sleep time injection happens late:
533 *
534 * CPU 0 CPU 1
535 * timekeeping_resume()
536 * ktime_get_fast_timestamps()
537 * mono, real = __ktime_get_real_fast()
538 * inject_sleep_time()
539 * update boot offset
540 * boot = mono + bootoffset;
541 *
542 * That means that boot time already has the sleep time adjustment, but
543 * real time does not. On the next readout both are in sync again.
544 *
545 * Preventing this for 64bit is not really feasible without destroying the
546 * careful cache layout of the timekeeper because the sequence count and
547 * struct tk_read_base would then need two cache lines instead of one.
548 *
549 * Access to the time keeper clock source is disabled across the innermost
550 * steps of suspend/resume. The accessors still work, but the timestamps
551 * are frozen until time keeping is resumed which happens very early.
552 *
553 * For regular suspend/resume there is no observable difference vs. sched
554 * clock, but it might affect some of the nasty low level debug printks.
555 *
556 * OTOH, access to sched clock is not guaranteed across suspend/resume on
557 * all systems either so it depends on the hardware in use.
558 *
559 * If that turns out to be a real problem then this could be mitigated by
560 * using sched clock in a similar way as during early boot. But it's not as
561 * trivial as on early boot because it needs some careful protection
562 * against the clock monotonic timestamp jumping backwards on resume.
563 */
564void ktime_get_fast_timestamps(struct ktime_timestamps *snapshot)
565{
566 struct timekeeper *tk = &tk_core.timekeeper;
567
568 snapshot->real = __ktime_get_real_fast(&tk_fast_mono, &snapshot->mono);
569 snapshot->boot = snapshot->mono + ktime_to_ns(data_race(tk->offs_boot));
570}
571
572/**
573 * halt_fast_timekeeper - Prevent fast timekeeper from accessing clocksource.
574 * @tk: Timekeeper to snapshot.
575 *
576 * It generally is unsafe to access the clocksource after timekeeping has been
577 * suspended, so take a snapshot of the readout base of @tk and use it as the
578 * fast timekeeper's readout base while suspended. It will return the same
579 * number of cycles every time until timekeeping is resumed at which time the
580 * proper readout base for the fast timekeeper will be restored automatically.
581 */
582static void halt_fast_timekeeper(const struct timekeeper *tk)
583{
584 static struct tk_read_base tkr_dummy;
585 const struct tk_read_base *tkr = &tk->tkr_mono;
586
587 memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy));
588 cycles_at_suspend = tk_clock_read(tkr);
589 tkr_dummy.clock = &dummy_clock;
590 tkr_dummy.base_real = tkr->base + tk->offs_real;
591 update_fast_timekeeper(&tkr_dummy, &tk_fast_mono);
592
593 tkr = &tk->tkr_raw;
594 memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy));
595 tkr_dummy.clock = &dummy_clock;
596 update_fast_timekeeper(&tkr_dummy, &tk_fast_raw);
597}
598
599static RAW_NOTIFIER_HEAD(pvclock_gtod_chain);
600
601static void update_pvclock_gtod(struct timekeeper *tk, bool was_set)
602{
603 raw_notifier_call_chain(&pvclock_gtod_chain, was_set, tk);
604}
605
606/**
607 * pvclock_gtod_register_notifier - register a pvclock timedata update listener
608 * @nb: Pointer to the notifier block to register
609 */
610int pvclock_gtod_register_notifier(struct notifier_block *nb)
611{
612 struct timekeeper *tk = &tk_core.timekeeper;
613 int ret;
614
615 guard(raw_spinlock_irqsave)(&tk_core.lock);
616 ret = raw_notifier_chain_register(&pvclock_gtod_chain, nb);
617 update_pvclock_gtod(tk, true);
618
619 return ret;
620}
621EXPORT_SYMBOL_GPL(pvclock_gtod_register_notifier);
622
623/**
624 * pvclock_gtod_unregister_notifier - unregister a pvclock
625 * timedata update listener
626 * @nb: Pointer to the notifier block to unregister
627 */
628int pvclock_gtod_unregister_notifier(struct notifier_block *nb)
629{
630 guard(raw_spinlock_irqsave)(&tk_core.lock);
631 return raw_notifier_chain_unregister(&pvclock_gtod_chain, nb);
632}
633EXPORT_SYMBOL_GPL(pvclock_gtod_unregister_notifier);
634
635/*
636 * tk_update_leap_state - helper to update the next_leap_ktime
637 */
638static inline void tk_update_leap_state(struct timekeeper *tk)
639{
640 tk->next_leap_ktime = ntp_get_next_leap();
641 if (tk->next_leap_ktime != KTIME_MAX)
642 /* Convert to monotonic time */
643 tk->next_leap_ktime = ktime_sub(tk->next_leap_ktime, tk->offs_real);
644}
645
646/*
647 * Leap state update for both shadow and the real timekeeper
648 * Separate to spare a full memcpy() of the timekeeper.
649 */
650static void tk_update_leap_state_all(struct tk_data *tkd)
651{
652 write_seqcount_begin(&tkd->seq);
653 tk_update_leap_state(&tkd->shadow_timekeeper);
654 tkd->timekeeper.next_leap_ktime = tkd->shadow_timekeeper.next_leap_ktime;
655 write_seqcount_end(&tkd->seq);
656}
657
658/*
659 * Update the ktime_t based scalar nsec members of the timekeeper
660 */
661static inline void tk_update_ktime_data(struct timekeeper *tk)
662{
663 u64 seconds;
664 u32 nsec;
665
666 /*
667 * The xtime based monotonic readout is:
668 * nsec = (xtime_sec + wtm_sec) * 1e9 + wtm_nsec + now();
669 * The ktime based monotonic readout is:
670 * nsec = base_mono + now();
671 * ==> base_mono = (xtime_sec + wtm_sec) * 1e9 + wtm_nsec
672 */
673 seconds = (u64)(tk->xtime_sec + tk->wall_to_monotonic.tv_sec);
674 nsec = (u32) tk->wall_to_monotonic.tv_nsec;
675 tk->tkr_mono.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec);
676
677 /*
678 * The sum of the nanoseconds portions of xtime and
679 * wall_to_monotonic can be greater/equal one second. Take
680 * this into account before updating tk->ktime_sec.
681 */
682 nsec += (u32)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
683 if (nsec >= NSEC_PER_SEC)
684 seconds++;
685 tk->ktime_sec = seconds;
686
687 /* Update the monotonic raw base */
688 tk->tkr_raw.base = ns_to_ktime(tk->raw_sec * NSEC_PER_SEC);
689}
690
691/*
692 * Restore the shadow timekeeper from the real timekeeper.
693 */
694static void timekeeping_restore_shadow(struct tk_data *tkd)
695{
696 lockdep_assert_held(&tkd->lock);
697 memcpy(&tkd->shadow_timekeeper, &tkd->timekeeper, sizeof(tkd->timekeeper));
698}
699
700static void timekeeping_update_from_shadow(struct tk_data *tkd, unsigned int action)
701{
702 struct timekeeper *tk = &tk_core.shadow_timekeeper;
703
704 lockdep_assert_held(&tkd->lock);
705
706 /*
707 * Block out readers before running the updates below because that
708 * updates VDSO and other time related infrastructure. Not blocking
709 * the readers might let a reader see time going backwards when
710 * reading from the VDSO after the VDSO update and then reading in
711 * the kernel from the timekeeper before that got updated.
712 */
713 write_seqcount_begin(&tkd->seq);
714
715 if (action & TK_CLEAR_NTP) {
716 tk->ntp_error = 0;
717 ntp_clear();
718 }
719
720 tk_update_leap_state(tk);
721 tk_update_ktime_data(tk);
722
723 update_vsyscall(tk);
724 update_pvclock_gtod(tk, action & TK_CLOCK_WAS_SET);
725
726 tk->tkr_mono.base_real = tk->tkr_mono.base + tk->offs_real;
727 update_fast_timekeeper(&tk->tkr_mono, &tk_fast_mono);
728 update_fast_timekeeper(&tk->tkr_raw, &tk_fast_raw);
729
730 if (action & TK_CLOCK_WAS_SET)
731 tk->clock_was_set_seq++;
732
733 /*
734 * Update the real timekeeper.
735 *
736 * We could avoid this memcpy() by switching pointers, but that has
737 * the downside that the reader side does not longer benefit from
738 * the cacheline optimized data layout of the timekeeper and requires
739 * another indirection.
740 */
741 memcpy(&tkd->timekeeper, tk, sizeof(*tk));
742 write_seqcount_end(&tkd->seq);
743}
744
745/**
746 * timekeeping_forward_now - update clock to the current time
747 * @tk: Pointer to the timekeeper to update
748 *
749 * Forward the current clock to update its state since the last call to
750 * update_wall_time(). This is useful before significant clock changes,
751 * as it avoids having to deal with this time offset explicitly.
752 */
753static void timekeeping_forward_now(struct timekeeper *tk)
754{
755 u64 cycle_now, delta;
756
757 cycle_now = tk_clock_read(&tk->tkr_mono);
758 delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask,
759 tk->tkr_mono.clock->max_raw_delta);
760 tk->tkr_mono.cycle_last = cycle_now;
761 tk->tkr_raw.cycle_last = cycle_now;
762
763 while (delta > 0) {
764 u64 max = tk->tkr_mono.clock->max_cycles;
765 u64 incr = delta < max ? delta : max;
766
767 tk->tkr_mono.xtime_nsec += incr * tk->tkr_mono.mult;
768 tk->tkr_raw.xtime_nsec += incr * tk->tkr_raw.mult;
769 tk_normalize_xtime(tk);
770 delta -= incr;
771 }
772}
773
774/**
775 * ktime_get_real_ts64 - Returns the time of day in a timespec64.
776 * @ts: pointer to the timespec to be set
777 *
778 * Returns the time of day in a timespec64 (WARN if suspended).
779 */
780void ktime_get_real_ts64(struct timespec64 *ts)
781{
782 struct timekeeper *tk = &tk_core.timekeeper;
783 unsigned int seq;
784 u64 nsecs;
785
786 WARN_ON(timekeeping_suspended);
787
788 do {
789 seq = read_seqcount_begin(&tk_core.seq);
790
791 ts->tv_sec = tk->xtime_sec;
792 nsecs = timekeeping_get_ns(&tk->tkr_mono);
793
794 } while (read_seqcount_retry(&tk_core.seq, seq));
795
796 ts->tv_nsec = 0;
797 timespec64_add_ns(ts, nsecs);
798}
799EXPORT_SYMBOL(ktime_get_real_ts64);
800
801ktime_t ktime_get(void)
802{
803 struct timekeeper *tk = &tk_core.timekeeper;
804 unsigned int seq;
805 ktime_t base;
806 u64 nsecs;
807
808 WARN_ON(timekeeping_suspended);
809
810 do {
811 seq = read_seqcount_begin(&tk_core.seq);
812 base = tk->tkr_mono.base;
813 nsecs = timekeeping_get_ns(&tk->tkr_mono);
814
815 } while (read_seqcount_retry(&tk_core.seq, seq));
816
817 return ktime_add_ns(base, nsecs);
818}
819EXPORT_SYMBOL_GPL(ktime_get);
820
821u32 ktime_get_resolution_ns(void)
822{
823 struct timekeeper *tk = &tk_core.timekeeper;
824 unsigned int seq;
825 u32 nsecs;
826
827 WARN_ON(timekeeping_suspended);
828
829 do {
830 seq = read_seqcount_begin(&tk_core.seq);
831 nsecs = tk->tkr_mono.mult >> tk->tkr_mono.shift;
832 } while (read_seqcount_retry(&tk_core.seq, seq));
833
834 return nsecs;
835}
836EXPORT_SYMBOL_GPL(ktime_get_resolution_ns);
837
838static ktime_t *offsets[TK_OFFS_MAX] = {
839 [TK_OFFS_REAL] = &tk_core.timekeeper.offs_real,
840 [TK_OFFS_BOOT] = &tk_core.timekeeper.offs_boot,
841 [TK_OFFS_TAI] = &tk_core.timekeeper.offs_tai,
842};
843
844ktime_t ktime_get_with_offset(enum tk_offsets offs)
845{
846 struct timekeeper *tk = &tk_core.timekeeper;
847 unsigned int seq;
848 ktime_t base, *offset = offsets[offs];
849 u64 nsecs;
850
851 WARN_ON(timekeeping_suspended);
852
853 do {
854 seq = read_seqcount_begin(&tk_core.seq);
855 base = ktime_add(tk->tkr_mono.base, *offset);
856 nsecs = timekeeping_get_ns(&tk->tkr_mono);
857
858 } while (read_seqcount_retry(&tk_core.seq, seq));
859
860 return ktime_add_ns(base, nsecs);
861
862}
863EXPORT_SYMBOL_GPL(ktime_get_with_offset);
864
865ktime_t ktime_get_coarse_with_offset(enum tk_offsets offs)
866{
867 struct timekeeper *tk = &tk_core.timekeeper;
868 unsigned int seq;
869 ktime_t base, *offset = offsets[offs];
870 u64 nsecs;
871
872 WARN_ON(timekeeping_suspended);
873
874 do {
875 seq = read_seqcount_begin(&tk_core.seq);
876 base = ktime_add(tk->tkr_mono.base, *offset);
877 nsecs = tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift;
878
879 } while (read_seqcount_retry(&tk_core.seq, seq));
880
881 return ktime_add_ns(base, nsecs);
882}
883EXPORT_SYMBOL_GPL(ktime_get_coarse_with_offset);
884
885/**
886 * ktime_mono_to_any() - convert monotonic time to any other time
887 * @tmono: time to convert.
888 * @offs: which offset to use
889 */
890ktime_t ktime_mono_to_any(ktime_t tmono, enum tk_offsets offs)
891{
892 ktime_t *offset = offsets[offs];
893 unsigned int seq;
894 ktime_t tconv;
895
896 if (IS_ENABLED(CONFIG_64BIT)) {
897 /*
898 * Paired with WRITE_ONCE()s in tk_set_wall_to_mono() and
899 * tk_update_sleep_time().
900 */
901 return ktime_add(tmono, READ_ONCE(*offset));
902 }
903
904 do {
905 seq = read_seqcount_begin(&tk_core.seq);
906 tconv = ktime_add(tmono, *offset);
907 } while (read_seqcount_retry(&tk_core.seq, seq));
908
909 return tconv;
910}
911EXPORT_SYMBOL_GPL(ktime_mono_to_any);
912
913/**
914 * ktime_get_raw - Returns the raw monotonic time in ktime_t format
915 */
916ktime_t ktime_get_raw(void)
917{
918 struct timekeeper *tk = &tk_core.timekeeper;
919 unsigned int seq;
920 ktime_t base;
921 u64 nsecs;
922
923 do {
924 seq = read_seqcount_begin(&tk_core.seq);
925 base = tk->tkr_raw.base;
926 nsecs = timekeeping_get_ns(&tk->tkr_raw);
927
928 } while (read_seqcount_retry(&tk_core.seq, seq));
929
930 return ktime_add_ns(base, nsecs);
931}
932EXPORT_SYMBOL_GPL(ktime_get_raw);
933
934/**
935 * ktime_get_ts64 - get the monotonic clock in timespec64 format
936 * @ts: pointer to timespec variable
937 *
938 * The function calculates the monotonic clock from the realtime
939 * clock and the wall_to_monotonic offset and stores the result
940 * in normalized timespec64 format in the variable pointed to by @ts.
941 */
942void ktime_get_ts64(struct timespec64 *ts)
943{
944 struct timekeeper *tk = &tk_core.timekeeper;
945 struct timespec64 tomono;
946 unsigned int seq;
947 u64 nsec;
948
949 WARN_ON(timekeeping_suspended);
950
951 do {
952 seq = read_seqcount_begin(&tk_core.seq);
953 ts->tv_sec = tk->xtime_sec;
954 nsec = timekeeping_get_ns(&tk->tkr_mono);
955 tomono = tk->wall_to_monotonic;
956
957 } while (read_seqcount_retry(&tk_core.seq, seq));
958
959 ts->tv_sec += tomono.tv_sec;
960 ts->tv_nsec = 0;
961 timespec64_add_ns(ts, nsec + tomono.tv_nsec);
962}
963EXPORT_SYMBOL_GPL(ktime_get_ts64);
964
965/**
966 * ktime_get_seconds - Get the seconds portion of CLOCK_MONOTONIC
967 *
968 * Returns the seconds portion of CLOCK_MONOTONIC with a single non
969 * serialized read. tk->ktime_sec is of type 'unsigned long' so this
970 * works on both 32 and 64 bit systems. On 32 bit systems the readout
971 * covers ~136 years of uptime which should be enough to prevent
972 * premature wrap arounds.
973 */
974time64_t ktime_get_seconds(void)
975{
976 struct timekeeper *tk = &tk_core.timekeeper;
977
978 WARN_ON(timekeeping_suspended);
979 return tk->ktime_sec;
980}
981EXPORT_SYMBOL_GPL(ktime_get_seconds);
982
983/**
984 * ktime_get_real_seconds - Get the seconds portion of CLOCK_REALTIME
985 *
986 * Returns the wall clock seconds since 1970.
987 *
988 * For 64bit systems the fast access to tk->xtime_sec is preserved. On
989 * 32bit systems the access must be protected with the sequence
990 * counter to provide "atomic" access to the 64bit tk->xtime_sec
991 * value.
992 */
993time64_t ktime_get_real_seconds(void)
994{
995 struct timekeeper *tk = &tk_core.timekeeper;
996 time64_t seconds;
997 unsigned int seq;
998
999 if (IS_ENABLED(CONFIG_64BIT))
1000 return tk->xtime_sec;
1001
1002 do {
1003 seq = read_seqcount_begin(&tk_core.seq);
1004 seconds = tk->xtime_sec;
1005
1006 } while (read_seqcount_retry(&tk_core.seq, seq));
1007
1008 return seconds;
1009}
1010EXPORT_SYMBOL_GPL(ktime_get_real_seconds);
1011
1012/**
1013 * __ktime_get_real_seconds - The same as ktime_get_real_seconds
1014 * but without the sequence counter protect. This internal function
1015 * is called just when timekeeping lock is already held.
1016 */
1017noinstr time64_t __ktime_get_real_seconds(void)
1018{
1019 struct timekeeper *tk = &tk_core.timekeeper;
1020
1021 return tk->xtime_sec;
1022}
1023
1024/**
1025 * ktime_get_snapshot - snapshots the realtime/monotonic raw clocks with counter
1026 * @systime_snapshot: pointer to struct receiving the system time snapshot
1027 */
1028void ktime_get_snapshot(struct system_time_snapshot *systime_snapshot)
1029{
1030 struct timekeeper *tk = &tk_core.timekeeper;
1031 unsigned int seq;
1032 ktime_t base_raw;
1033 ktime_t base_real;
1034 ktime_t base_boot;
1035 u64 nsec_raw;
1036 u64 nsec_real;
1037 u64 now;
1038
1039 WARN_ON_ONCE(timekeeping_suspended);
1040
1041 do {
1042 seq = read_seqcount_begin(&tk_core.seq);
1043 now = tk_clock_read(&tk->tkr_mono);
1044 systime_snapshot->cs_id = tk->tkr_mono.clock->id;
1045 systime_snapshot->cs_was_changed_seq = tk->cs_was_changed_seq;
1046 systime_snapshot->clock_was_set_seq = tk->clock_was_set_seq;
1047 base_real = ktime_add(tk->tkr_mono.base,
1048 tk_core.timekeeper.offs_real);
1049 base_boot = ktime_add(tk->tkr_mono.base,
1050 tk_core.timekeeper.offs_boot);
1051 base_raw = tk->tkr_raw.base;
1052 nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono, now);
1053 nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw, now);
1054 } while (read_seqcount_retry(&tk_core.seq, seq));
1055
1056 systime_snapshot->cycles = now;
1057 systime_snapshot->real = ktime_add_ns(base_real, nsec_real);
1058 systime_snapshot->boot = ktime_add_ns(base_boot, nsec_real);
1059 systime_snapshot->raw = ktime_add_ns(base_raw, nsec_raw);
1060}
1061EXPORT_SYMBOL_GPL(ktime_get_snapshot);
1062
1063/* Scale base by mult/div checking for overflow */
1064static int scale64_check_overflow(u64 mult, u64 div, u64 *base)
1065{
1066 u64 tmp, rem;
1067
1068 tmp = div64_u64_rem(*base, div, &rem);
1069
1070 if (((int)sizeof(u64)*8 - fls64(mult) < fls64(tmp)) ||
1071 ((int)sizeof(u64)*8 - fls64(mult) < fls64(rem)))
1072 return -EOVERFLOW;
1073 tmp *= mult;
1074
1075 rem = div64_u64(rem * mult, div);
1076 *base = tmp + rem;
1077 return 0;
1078}
1079
1080/**
1081 * adjust_historical_crosststamp - adjust crosstimestamp previous to current interval
1082 * @history: Snapshot representing start of history
1083 * @partial_history_cycles: Cycle offset into history (fractional part)
1084 * @total_history_cycles: Total history length in cycles
1085 * @discontinuity: True indicates clock was set on history period
1086 * @ts: Cross timestamp that should be adjusted using
1087 * partial/total ratio
1088 *
1089 * Helper function used by get_device_system_crosststamp() to correct the
1090 * crosstimestamp corresponding to the start of the current interval to the
1091 * system counter value (timestamp point) provided by the driver. The
1092 * total_history_* quantities are the total history starting at the provided
1093 * reference point and ending at the start of the current interval. The cycle
1094 * count between the driver timestamp point and the start of the current
1095 * interval is partial_history_cycles.
1096 */
1097static int adjust_historical_crosststamp(struct system_time_snapshot *history,
1098 u64 partial_history_cycles,
1099 u64 total_history_cycles,
1100 bool discontinuity,
1101 struct system_device_crosststamp *ts)
1102{
1103 struct timekeeper *tk = &tk_core.timekeeper;
1104 u64 corr_raw, corr_real;
1105 bool interp_forward;
1106 int ret;
1107
1108 if (total_history_cycles == 0 || partial_history_cycles == 0)
1109 return 0;
1110
1111 /* Interpolate shortest distance from beginning or end of history */
1112 interp_forward = partial_history_cycles > total_history_cycles / 2;
1113 partial_history_cycles = interp_forward ?
1114 total_history_cycles - partial_history_cycles :
1115 partial_history_cycles;
1116
1117 /*
1118 * Scale the monotonic raw time delta by:
1119 * partial_history_cycles / total_history_cycles
1120 */
1121 corr_raw = (u64)ktime_to_ns(
1122 ktime_sub(ts->sys_monoraw, history->raw));
1123 ret = scale64_check_overflow(partial_history_cycles,
1124 total_history_cycles, &corr_raw);
1125 if (ret)
1126 return ret;
1127
1128 /*
1129 * If there is a discontinuity in the history, scale monotonic raw
1130 * correction by:
1131 * mult(real)/mult(raw) yielding the realtime correction
1132 * Otherwise, calculate the realtime correction similar to monotonic
1133 * raw calculation
1134 */
1135 if (discontinuity) {
1136 corr_real = mul_u64_u32_div
1137 (corr_raw, tk->tkr_mono.mult, tk->tkr_raw.mult);
1138 } else {
1139 corr_real = (u64)ktime_to_ns(
1140 ktime_sub(ts->sys_realtime, history->real));
1141 ret = scale64_check_overflow(partial_history_cycles,
1142 total_history_cycles, &corr_real);
1143 if (ret)
1144 return ret;
1145 }
1146
1147 /* Fixup monotonic raw and real time time values */
1148 if (interp_forward) {
1149 ts->sys_monoraw = ktime_add_ns(history->raw, corr_raw);
1150 ts->sys_realtime = ktime_add_ns(history->real, corr_real);
1151 } else {
1152 ts->sys_monoraw = ktime_sub_ns(ts->sys_monoraw, corr_raw);
1153 ts->sys_realtime = ktime_sub_ns(ts->sys_realtime, corr_real);
1154 }
1155
1156 return 0;
1157}
1158
1159/*
1160 * timestamp_in_interval - true if ts is chronologically in [start, end]
1161 *
1162 * True if ts occurs chronologically at or after start, and before or at end.
1163 */
1164static bool timestamp_in_interval(u64 start, u64 end, u64 ts)
1165{
1166 if (ts >= start && ts <= end)
1167 return true;
1168 if (start > end && (ts >= start || ts <= end))
1169 return true;
1170 return false;
1171}
1172
1173static bool convert_clock(u64 *val, u32 numerator, u32 denominator)
1174{
1175 u64 rem, res;
1176
1177 if (!numerator || !denominator)
1178 return false;
1179
1180 res = div64_u64_rem(*val, denominator, &rem) * numerator;
1181 *val = res + div_u64(rem * numerator, denominator);
1182 return true;
1183}
1184
1185static bool convert_base_to_cs(struct system_counterval_t *scv)
1186{
1187 struct clocksource *cs = tk_core.timekeeper.tkr_mono.clock;
1188 struct clocksource_base *base;
1189 u32 num, den;
1190
1191 /* The timestamp was taken from the time keeper clock source */
1192 if (cs->id == scv->cs_id)
1193 return true;
1194
1195 /*
1196 * Check whether cs_id matches the base clock. Prevent the compiler from
1197 * re-evaluating @base as the clocksource might change concurrently.
1198 */
1199 base = READ_ONCE(cs->base);
1200 if (!base || base->id != scv->cs_id)
1201 return false;
1202
1203 num = scv->use_nsecs ? cs->freq_khz : base->numerator;
1204 den = scv->use_nsecs ? USEC_PER_SEC : base->denominator;
1205
1206 if (!convert_clock(&scv->cycles, num, den))
1207 return false;
1208
1209 scv->cycles += base->offset;
1210 return true;
1211}
1212
1213static bool convert_cs_to_base(u64 *cycles, enum clocksource_ids base_id)
1214{
1215 struct clocksource *cs = tk_core.timekeeper.tkr_mono.clock;
1216 struct clocksource_base *base;
1217
1218 /*
1219 * Check whether base_id matches the base clock. Prevent the compiler from
1220 * re-evaluating @base as the clocksource might change concurrently.
1221 */
1222 base = READ_ONCE(cs->base);
1223 if (!base || base->id != base_id)
1224 return false;
1225
1226 *cycles -= base->offset;
1227 if (!convert_clock(cycles, base->denominator, base->numerator))
1228 return false;
1229 return true;
1230}
1231
1232static bool convert_ns_to_cs(u64 *delta)
1233{
1234 struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
1235
1236 if (BITS_TO_BYTES(fls64(*delta) + tkr->shift) >= sizeof(*delta))
1237 return false;
1238
1239 *delta = div_u64((*delta << tkr->shift) - tkr->xtime_nsec, tkr->mult);
1240 return true;
1241}
1242
1243/**
1244 * ktime_real_to_base_clock() - Convert CLOCK_REALTIME timestamp to a base clock timestamp
1245 * @treal: CLOCK_REALTIME timestamp to convert
1246 * @base_id: base clocksource id
1247 * @cycles: pointer to store the converted base clock timestamp
1248 *
1249 * Converts a supplied, future realtime clock value to the corresponding base clock value.
1250 *
1251 * Return: true if the conversion is successful, false otherwise.
1252 */
1253bool ktime_real_to_base_clock(ktime_t treal, enum clocksource_ids base_id, u64 *cycles)
1254{
1255 struct timekeeper *tk = &tk_core.timekeeper;
1256 unsigned int seq;
1257 u64 delta;
1258
1259 do {
1260 seq = read_seqcount_begin(&tk_core.seq);
1261 if ((u64)treal < tk->tkr_mono.base_real)
1262 return false;
1263 delta = (u64)treal - tk->tkr_mono.base_real;
1264 if (!convert_ns_to_cs(&delta))
1265 return false;
1266 *cycles = tk->tkr_mono.cycle_last + delta;
1267 if (!convert_cs_to_base(cycles, base_id))
1268 return false;
1269 } while (read_seqcount_retry(&tk_core.seq, seq));
1270
1271 return true;
1272}
1273EXPORT_SYMBOL_GPL(ktime_real_to_base_clock);
1274
1275/**
1276 * get_device_system_crosststamp - Synchronously capture system/device timestamp
1277 * @get_time_fn: Callback to get simultaneous device time and
1278 * system counter from the device driver
1279 * @ctx: Context passed to get_time_fn()
1280 * @history_begin: Historical reference point used to interpolate system
1281 * time when counter provided by the driver is before the current interval
1282 * @xtstamp: Receives simultaneously captured system and device time
1283 *
1284 * Reads a timestamp from a device and correlates it to system time
1285 */
1286int get_device_system_crosststamp(int (*get_time_fn)
1287 (ktime_t *device_time,
1288 struct system_counterval_t *sys_counterval,
1289 void *ctx),
1290 void *ctx,
1291 struct system_time_snapshot *history_begin,
1292 struct system_device_crosststamp *xtstamp)
1293{
1294 struct system_counterval_t system_counterval;
1295 struct timekeeper *tk = &tk_core.timekeeper;
1296 u64 cycles, now, interval_start;
1297 unsigned int clock_was_set_seq = 0;
1298 ktime_t base_real, base_raw;
1299 u64 nsec_real, nsec_raw;
1300 u8 cs_was_changed_seq;
1301 unsigned int seq;
1302 bool do_interp;
1303 int ret;
1304
1305 do {
1306 seq = read_seqcount_begin(&tk_core.seq);
1307 /*
1308 * Try to synchronously capture device time and a system
1309 * counter value calling back into the device driver
1310 */
1311 ret = get_time_fn(&xtstamp->device, &system_counterval, ctx);
1312 if (ret)
1313 return ret;
1314
1315 /*
1316 * Verify that the clocksource ID associated with the captured
1317 * system counter value is the same as for the currently
1318 * installed timekeeper clocksource
1319 */
1320 if (system_counterval.cs_id == CSID_GENERIC ||
1321 !convert_base_to_cs(&system_counterval))
1322 return -ENODEV;
1323 cycles = system_counterval.cycles;
1324
1325 /*
1326 * Check whether the system counter value provided by the
1327 * device driver is on the current timekeeping interval.
1328 */
1329 now = tk_clock_read(&tk->tkr_mono);
1330 interval_start = tk->tkr_mono.cycle_last;
1331 if (!timestamp_in_interval(interval_start, now, cycles)) {
1332 clock_was_set_seq = tk->clock_was_set_seq;
1333 cs_was_changed_seq = tk->cs_was_changed_seq;
1334 cycles = interval_start;
1335 do_interp = true;
1336 } else {
1337 do_interp = false;
1338 }
1339
1340 base_real = ktime_add(tk->tkr_mono.base,
1341 tk_core.timekeeper.offs_real);
1342 base_raw = tk->tkr_raw.base;
1343
1344 nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono, cycles);
1345 nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw, cycles);
1346 } while (read_seqcount_retry(&tk_core.seq, seq));
1347
1348 xtstamp->sys_realtime = ktime_add_ns(base_real, nsec_real);
1349 xtstamp->sys_monoraw = ktime_add_ns(base_raw, nsec_raw);
1350
1351 /*
1352 * Interpolate if necessary, adjusting back from the start of the
1353 * current interval
1354 */
1355 if (do_interp) {
1356 u64 partial_history_cycles, total_history_cycles;
1357 bool discontinuity;
1358
1359 /*
1360 * Check that the counter value is not before the provided
1361 * history reference and that the history doesn't cross a
1362 * clocksource change
1363 */
1364 if (!history_begin ||
1365 !timestamp_in_interval(history_begin->cycles,
1366 cycles, system_counterval.cycles) ||
1367 history_begin->cs_was_changed_seq != cs_was_changed_seq)
1368 return -EINVAL;
1369 partial_history_cycles = cycles - system_counterval.cycles;
1370 total_history_cycles = cycles - history_begin->cycles;
1371 discontinuity =
1372 history_begin->clock_was_set_seq != clock_was_set_seq;
1373
1374 ret = adjust_historical_crosststamp(history_begin,
1375 partial_history_cycles,
1376 total_history_cycles,
1377 discontinuity, xtstamp);
1378 if (ret)
1379 return ret;
1380 }
1381
1382 return 0;
1383}
1384EXPORT_SYMBOL_GPL(get_device_system_crosststamp);
1385
1386/**
1387 * timekeeping_clocksource_has_base - Check whether the current clocksource
1388 * is based on given a base clock
1389 * @id: base clocksource ID
1390 *
1391 * Note: The return value is a snapshot which can become invalid right
1392 * after the function returns.
1393 *
1394 * Return: true if the timekeeper clocksource has a base clock with @id,
1395 * false otherwise
1396 */
1397bool timekeeping_clocksource_has_base(enum clocksource_ids id)
1398{
1399 /*
1400 * This is a snapshot, so no point in using the sequence
1401 * count. Just prevent the compiler from re-evaluating @base as the
1402 * clocksource might change concurrently.
1403 */
1404 struct clocksource_base *base = READ_ONCE(tk_core.timekeeper.tkr_mono.clock->base);
1405
1406 return base ? base->id == id : false;
1407}
1408EXPORT_SYMBOL_GPL(timekeeping_clocksource_has_base);
1409
1410/**
1411 * do_settimeofday64 - Sets the time of day.
1412 * @ts: pointer to the timespec64 variable containing the new time
1413 *
1414 * Sets the time of day to the new time and update NTP and notify hrtimers
1415 */
1416int do_settimeofday64(const struct timespec64 *ts)
1417{
1418 struct timespec64 ts_delta, xt;
1419
1420 if (!timespec64_valid_settod(ts))
1421 return -EINVAL;
1422
1423 scoped_guard (raw_spinlock_irqsave, &tk_core.lock) {
1424 struct timekeeper *tks = &tk_core.shadow_timekeeper;
1425
1426 timekeeping_forward_now(tks);
1427
1428 xt = tk_xtime(tks);
1429 ts_delta = timespec64_sub(*ts, xt);
1430
1431 if (timespec64_compare(&tks->wall_to_monotonic, &ts_delta) > 0) {
1432 timekeeping_restore_shadow(&tk_core);
1433 return -EINVAL;
1434 }
1435
1436 tk_set_wall_to_mono(tks, timespec64_sub(tks->wall_to_monotonic, ts_delta));
1437 tk_set_xtime(tks, ts);
1438 timekeeping_update_from_shadow(&tk_core, TK_UPDATE_ALL);
1439 }
1440
1441 /* Signal hrtimers about time change */
1442 clock_was_set(CLOCK_SET_WALL);
1443
1444 audit_tk_injoffset(ts_delta);
1445 add_device_randomness(ts, sizeof(*ts));
1446 return 0;
1447}
1448EXPORT_SYMBOL(do_settimeofday64);
1449
1450/**
1451 * timekeeping_inject_offset - Adds or subtracts from the current time.
1452 * @ts: Pointer to the timespec variable containing the offset
1453 *
1454 * Adds or subtracts an offset value from the current time.
1455 */
1456static int timekeeping_inject_offset(const struct timespec64 *ts)
1457{
1458 if (ts->tv_nsec < 0 || ts->tv_nsec >= NSEC_PER_SEC)
1459 return -EINVAL;
1460
1461 scoped_guard (raw_spinlock_irqsave, &tk_core.lock) {
1462 struct timekeeper *tks = &tk_core.shadow_timekeeper;
1463 struct timespec64 tmp;
1464
1465 timekeeping_forward_now(tks);
1466
1467 /* Make sure the proposed value is valid */
1468 tmp = timespec64_add(tk_xtime(tks), *ts);
1469 if (timespec64_compare(&tks->wall_to_monotonic, ts) > 0 ||
1470 !timespec64_valid_settod(&tmp)) {
1471 timekeeping_restore_shadow(&tk_core);
1472 return -EINVAL;
1473 }
1474
1475 tk_xtime_add(tks, ts);
1476 tk_set_wall_to_mono(tks, timespec64_sub(tks->wall_to_monotonic, *ts));
1477 timekeeping_update_from_shadow(&tk_core, TK_UPDATE_ALL);
1478 }
1479
1480 /* Signal hrtimers about time change */
1481 clock_was_set(CLOCK_SET_WALL);
1482 return 0;
1483}
1484
1485/*
1486 * Indicates if there is an offset between the system clock and the hardware
1487 * clock/persistent clock/rtc.
1488 */
1489int persistent_clock_is_local;
1490
1491/*
1492 * Adjust the time obtained from the CMOS to be UTC time instead of
1493 * local time.
1494 *
1495 * This is ugly, but preferable to the alternatives. Otherwise we
1496 * would either need to write a program to do it in /etc/rc (and risk
1497 * confusion if the program gets run more than once; it would also be
1498 * hard to make the program warp the clock precisely n hours) or
1499 * compile in the timezone information into the kernel. Bad, bad....
1500 *
1501 * - TYT, 1992-01-01
1502 *
1503 * The best thing to do is to keep the CMOS clock in universal time (UTC)
1504 * as real UNIX machines always do it. This avoids all headaches about
1505 * daylight saving times and warping kernel clocks.
1506 */
1507void timekeeping_warp_clock(void)
1508{
1509 if (sys_tz.tz_minuteswest != 0) {
1510 struct timespec64 adjust;
1511
1512 persistent_clock_is_local = 1;
1513 adjust.tv_sec = sys_tz.tz_minuteswest * 60;
1514 adjust.tv_nsec = 0;
1515 timekeeping_inject_offset(&adjust);
1516 }
1517}
1518
1519/*
1520 * __timekeeping_set_tai_offset - Sets the TAI offset from UTC and monotonic
1521 */
1522static void __timekeeping_set_tai_offset(struct timekeeper *tk, s32 tai_offset)
1523{
1524 tk->tai_offset = tai_offset;
1525 tk->offs_tai = ktime_add(tk->offs_real, ktime_set(tai_offset, 0));
1526}
1527
1528/*
1529 * change_clocksource - Swaps clocksources if a new one is available
1530 *
1531 * Accumulates current time interval and initializes new clocksource
1532 */
1533static int change_clocksource(void *data)
1534{
1535 struct clocksource *new = data, *old = NULL;
1536
1537 /*
1538 * If the clocksource is in a module, get a module reference.
1539 * Succeeds for built-in code (owner == NULL) as well. Abort if the
1540 * reference can't be acquired.
1541 */
1542 if (!try_module_get(new->owner))
1543 return 0;
1544
1545 /* Abort if the device can't be enabled */
1546 if (new->enable && new->enable(new) != 0) {
1547 module_put(new->owner);
1548 return 0;
1549 }
1550
1551 scoped_guard (raw_spinlock_irqsave, &tk_core.lock) {
1552 struct timekeeper *tks = &tk_core.shadow_timekeeper;
1553
1554 timekeeping_forward_now(tks);
1555 old = tks->tkr_mono.clock;
1556 tk_setup_internals(tks, new);
1557 timekeeping_update_from_shadow(&tk_core, TK_UPDATE_ALL);
1558 }
1559
1560 if (old) {
1561 if (old->disable)
1562 old->disable(old);
1563 module_put(old->owner);
1564 }
1565
1566 return 0;
1567}
1568
1569/**
1570 * timekeeping_notify - Install a new clock source
1571 * @clock: pointer to the clock source
1572 *
1573 * This function is called from clocksource.c after a new, better clock
1574 * source has been registered. The caller holds the clocksource_mutex.
1575 */
1576int timekeeping_notify(struct clocksource *clock)
1577{
1578 struct timekeeper *tk = &tk_core.timekeeper;
1579
1580 if (tk->tkr_mono.clock == clock)
1581 return 0;
1582 stop_machine(change_clocksource, clock, NULL);
1583 tick_clock_notify();
1584 return tk->tkr_mono.clock == clock ? 0 : -1;
1585}
1586
1587/**
1588 * ktime_get_raw_ts64 - Returns the raw monotonic time in a timespec
1589 * @ts: pointer to the timespec64 to be set
1590 *
1591 * Returns the raw monotonic time (completely un-modified by ntp)
1592 */
1593void ktime_get_raw_ts64(struct timespec64 *ts)
1594{
1595 struct timekeeper *tk = &tk_core.timekeeper;
1596 unsigned int seq;
1597 u64 nsecs;
1598
1599 do {
1600 seq = read_seqcount_begin(&tk_core.seq);
1601 ts->tv_sec = tk->raw_sec;
1602 nsecs = timekeeping_get_ns(&tk->tkr_raw);
1603
1604 } while (read_seqcount_retry(&tk_core.seq, seq));
1605
1606 ts->tv_nsec = 0;
1607 timespec64_add_ns(ts, nsecs);
1608}
1609EXPORT_SYMBOL(ktime_get_raw_ts64);
1610
1611
1612/**
1613 * timekeeping_valid_for_hres - Check if timekeeping is suitable for hres
1614 */
1615int timekeeping_valid_for_hres(void)
1616{
1617 struct timekeeper *tk = &tk_core.timekeeper;
1618 unsigned int seq;
1619 int ret;
1620
1621 do {
1622 seq = read_seqcount_begin(&tk_core.seq);
1623
1624 ret = tk->tkr_mono.clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
1625
1626 } while (read_seqcount_retry(&tk_core.seq, seq));
1627
1628 return ret;
1629}
1630
1631/**
1632 * timekeeping_max_deferment - Returns max time the clocksource can be deferred
1633 */
1634u64 timekeeping_max_deferment(void)
1635{
1636 struct timekeeper *tk = &tk_core.timekeeper;
1637 unsigned int seq;
1638 u64 ret;
1639
1640 do {
1641 seq = read_seqcount_begin(&tk_core.seq);
1642
1643 ret = tk->tkr_mono.clock->max_idle_ns;
1644
1645 } while (read_seqcount_retry(&tk_core.seq, seq));
1646
1647 return ret;
1648}
1649
1650/**
1651 * read_persistent_clock64 - Return time from the persistent clock.
1652 * @ts: Pointer to the storage for the readout value
1653 *
1654 * Weak dummy function for arches that do not yet support it.
1655 * Reads the time from the battery backed persistent clock.
1656 * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
1657 *
1658 * XXX - Do be sure to remove it once all arches implement it.
1659 */
1660void __weak read_persistent_clock64(struct timespec64 *ts)
1661{
1662 ts->tv_sec = 0;
1663 ts->tv_nsec = 0;
1664}
1665
1666/**
1667 * read_persistent_wall_and_boot_offset - Read persistent clock, and also offset
1668 * from the boot.
1669 * @wall_time: current time as returned by persistent clock
1670 * @boot_offset: offset that is defined as wall_time - boot_time
1671 *
1672 * Weak dummy function for arches that do not yet support it.
1673 *
1674 * The default function calculates offset based on the current value of
1675 * local_clock(). This way architectures that support sched_clock() but don't
1676 * support dedicated boot time clock will provide the best estimate of the
1677 * boot time.
1678 */
1679void __weak __init
1680read_persistent_wall_and_boot_offset(struct timespec64 *wall_time,
1681 struct timespec64 *boot_offset)
1682{
1683 read_persistent_clock64(wall_time);
1684 *boot_offset = ns_to_timespec64(local_clock());
1685}
1686
1687static __init void tkd_basic_setup(struct tk_data *tkd)
1688{
1689 raw_spin_lock_init(&tkd->lock);
1690 seqcount_raw_spinlock_init(&tkd->seq, &tkd->lock);
1691}
1692
1693/*
1694 * Flag reflecting whether timekeeping_resume() has injected sleeptime.
1695 *
1696 * The flag starts of false and is only set when a suspend reaches
1697 * timekeeping_suspend(), timekeeping_resume() sets it to false when the
1698 * timekeeper clocksource is not stopping across suspend and has been
1699 * used to update sleep time. If the timekeeper clocksource has stopped
1700 * then the flag stays true and is used by the RTC resume code to decide
1701 * whether sleeptime must be injected and if so the flag gets false then.
1702 *
1703 * If a suspend fails before reaching timekeeping_resume() then the flag
1704 * stays false and prevents erroneous sleeptime injection.
1705 */
1706static bool suspend_timing_needed;
1707
1708/* Flag for if there is a persistent clock on this platform */
1709static bool persistent_clock_exists;
1710
1711/*
1712 * timekeeping_init - Initializes the clocksource and common timekeeping values
1713 */
1714void __init timekeeping_init(void)
1715{
1716 struct timespec64 wall_time, boot_offset, wall_to_mono;
1717 struct timekeeper *tks = &tk_core.shadow_timekeeper;
1718 struct clocksource *clock;
1719
1720 tkd_basic_setup(&tk_core);
1721
1722 read_persistent_wall_and_boot_offset(&wall_time, &boot_offset);
1723 if (timespec64_valid_settod(&wall_time) &&
1724 timespec64_to_ns(&wall_time) > 0) {
1725 persistent_clock_exists = true;
1726 } else if (timespec64_to_ns(&wall_time) != 0) {
1727 pr_warn("Persistent clock returned invalid value");
1728 wall_time = (struct timespec64){0};
1729 }
1730
1731 if (timespec64_compare(&wall_time, &boot_offset) < 0)
1732 boot_offset = (struct timespec64){0};
1733
1734 /*
1735 * We want set wall_to_mono, so the following is true:
1736 * wall time + wall_to_mono = boot time
1737 */
1738 wall_to_mono = timespec64_sub(boot_offset, wall_time);
1739
1740 guard(raw_spinlock_irqsave)(&tk_core.lock);
1741
1742 ntp_init();
1743
1744 clock = clocksource_default_clock();
1745 if (clock->enable)
1746 clock->enable(clock);
1747 tk_setup_internals(tks, clock);
1748
1749 tk_set_xtime(tks, &wall_time);
1750 tks->raw_sec = 0;
1751
1752 tk_set_wall_to_mono(tks, wall_to_mono);
1753
1754 timekeeping_update_from_shadow(&tk_core, TK_CLOCK_WAS_SET);
1755}
1756
1757/* time in seconds when suspend began for persistent clock */
1758static struct timespec64 timekeeping_suspend_time;
1759
1760/**
1761 * __timekeeping_inject_sleeptime - Internal function to add sleep interval
1762 * @tk: Pointer to the timekeeper to be updated
1763 * @delta: Pointer to the delta value in timespec64 format
1764 *
1765 * Takes a timespec offset measuring a suspend interval and properly
1766 * adds the sleep offset to the timekeeping variables.
1767 */
1768static void __timekeeping_inject_sleeptime(struct timekeeper *tk,
1769 const struct timespec64 *delta)
1770{
1771 if (!timespec64_valid_strict(delta)) {
1772 printk_deferred(KERN_WARNING
1773 "__timekeeping_inject_sleeptime: Invalid "
1774 "sleep delta value!\n");
1775 return;
1776 }
1777 tk_xtime_add(tk, delta);
1778 tk_set_wall_to_mono(tk, timespec64_sub(tk->wall_to_monotonic, *delta));
1779 tk_update_sleep_time(tk, timespec64_to_ktime(*delta));
1780 tk_debug_account_sleep_time(delta);
1781}
1782
1783#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
1784/*
1785 * We have three kinds of time sources to use for sleep time
1786 * injection, the preference order is:
1787 * 1) non-stop clocksource
1788 * 2) persistent clock (ie: RTC accessible when irqs are off)
1789 * 3) RTC
1790 *
1791 * 1) and 2) are used by timekeeping, 3) by RTC subsystem.
1792 * If system has neither 1) nor 2), 3) will be used finally.
1793 *
1794 *
1795 * If timekeeping has injected sleeptime via either 1) or 2),
1796 * 3) becomes needless, so in this case we don't need to call
1797 * rtc_resume(), and this is what timekeeping_rtc_skipresume()
1798 * means.
1799 */
1800bool timekeeping_rtc_skipresume(void)
1801{
1802 return !suspend_timing_needed;
1803}
1804
1805/*
1806 * 1) can be determined whether to use or not only when doing
1807 * timekeeping_resume() which is invoked after rtc_suspend(),
1808 * so we can't skip rtc_suspend() surely if system has 1).
1809 *
1810 * But if system has 2), 2) will definitely be used, so in this
1811 * case we don't need to call rtc_suspend(), and this is what
1812 * timekeeping_rtc_skipsuspend() means.
1813 */
1814bool timekeeping_rtc_skipsuspend(void)
1815{
1816 return persistent_clock_exists;
1817}
1818
1819/**
1820 * timekeeping_inject_sleeptime64 - Adds suspend interval to timeekeeping values
1821 * @delta: pointer to a timespec64 delta value
1822 *
1823 * This hook is for architectures that cannot support read_persistent_clock64
1824 * because their RTC/persistent clock is only accessible when irqs are enabled.
1825 * and also don't have an effective nonstop clocksource.
1826 *
1827 * This function should only be called by rtc_resume(), and allows
1828 * a suspend offset to be injected into the timekeeping values.
1829 */
1830void timekeeping_inject_sleeptime64(const struct timespec64 *delta)
1831{
1832 scoped_guard(raw_spinlock_irqsave, &tk_core.lock) {
1833 struct timekeeper *tks = &tk_core.shadow_timekeeper;
1834
1835 suspend_timing_needed = false;
1836 timekeeping_forward_now(tks);
1837 __timekeeping_inject_sleeptime(tks, delta);
1838 timekeeping_update_from_shadow(&tk_core, TK_UPDATE_ALL);
1839 }
1840
1841 /* Signal hrtimers about time change */
1842 clock_was_set(CLOCK_SET_WALL | CLOCK_SET_BOOT);
1843}
1844#endif
1845
1846/**
1847 * timekeeping_resume - Resumes the generic timekeeping subsystem.
1848 */
1849void timekeeping_resume(void)
1850{
1851 struct timekeeper *tks = &tk_core.shadow_timekeeper;
1852 struct clocksource *clock = tks->tkr_mono.clock;
1853 struct timespec64 ts_new, ts_delta;
1854 bool inject_sleeptime = false;
1855 u64 cycle_now, nsec;
1856 unsigned long flags;
1857
1858 read_persistent_clock64(&ts_new);
1859
1860 clockevents_resume();
1861 clocksource_resume();
1862
1863 raw_spin_lock_irqsave(&tk_core.lock, flags);
1864
1865 /*
1866 * After system resumes, we need to calculate the suspended time and
1867 * compensate it for the OS time. There are 3 sources that could be
1868 * used: Nonstop clocksource during suspend, persistent clock and rtc
1869 * device.
1870 *
1871 * One specific platform may have 1 or 2 or all of them, and the
1872 * preference will be:
1873 * suspend-nonstop clocksource -> persistent clock -> rtc
1874 * The less preferred source will only be tried if there is no better
1875 * usable source. The rtc part is handled separately in rtc core code.
1876 */
1877 cycle_now = tk_clock_read(&tks->tkr_mono);
1878 nsec = clocksource_stop_suspend_timing(clock, cycle_now);
1879 if (nsec > 0) {
1880 ts_delta = ns_to_timespec64(nsec);
1881 inject_sleeptime = true;
1882 } else if (timespec64_compare(&ts_new, &timekeeping_suspend_time) > 0) {
1883 ts_delta = timespec64_sub(ts_new, timekeeping_suspend_time);
1884 inject_sleeptime = true;
1885 }
1886
1887 if (inject_sleeptime) {
1888 suspend_timing_needed = false;
1889 __timekeeping_inject_sleeptime(tks, &ts_delta);
1890 }
1891
1892 /* Re-base the last cycle value */
1893 tks->tkr_mono.cycle_last = cycle_now;
1894 tks->tkr_raw.cycle_last = cycle_now;
1895
1896 tks->ntp_error = 0;
1897 timekeeping_suspended = 0;
1898 timekeeping_update_from_shadow(&tk_core, TK_CLOCK_WAS_SET);
1899 raw_spin_unlock_irqrestore(&tk_core.lock, flags);
1900
1901 touch_softlockup_watchdog();
1902
1903 /* Resume the clockevent device(s) and hrtimers */
1904 tick_resume();
1905 /* Notify timerfd as resume is equivalent to clock_was_set() */
1906 timerfd_resume();
1907}
1908
1909int timekeeping_suspend(void)
1910{
1911 struct timekeeper *tks = &tk_core.shadow_timekeeper;
1912 struct timespec64 delta, delta_delta;
1913 static struct timespec64 old_delta;
1914 struct clocksource *curr_clock;
1915 unsigned long flags;
1916 u64 cycle_now;
1917
1918 read_persistent_clock64(&timekeeping_suspend_time);
1919
1920 /*
1921 * On some systems the persistent_clock can not be detected at
1922 * timekeeping_init by its return value, so if we see a valid
1923 * value returned, update the persistent_clock_exists flag.
1924 */
1925 if (timekeeping_suspend_time.tv_sec || timekeeping_suspend_time.tv_nsec)
1926 persistent_clock_exists = true;
1927
1928 suspend_timing_needed = true;
1929
1930 raw_spin_lock_irqsave(&tk_core.lock, flags);
1931 timekeeping_forward_now(tks);
1932 timekeeping_suspended = 1;
1933
1934 /*
1935 * Since we've called forward_now, cycle_last stores the value
1936 * just read from the current clocksource. Save this to potentially
1937 * use in suspend timing.
1938 */
1939 curr_clock = tks->tkr_mono.clock;
1940 cycle_now = tks->tkr_mono.cycle_last;
1941 clocksource_start_suspend_timing(curr_clock, cycle_now);
1942
1943 if (persistent_clock_exists) {
1944 /*
1945 * To avoid drift caused by repeated suspend/resumes,
1946 * which each can add ~1 second drift error,
1947 * try to compensate so the difference in system time
1948 * and persistent_clock time stays close to constant.
1949 */
1950 delta = timespec64_sub(tk_xtime(tks), timekeeping_suspend_time);
1951 delta_delta = timespec64_sub(delta, old_delta);
1952 if (abs(delta_delta.tv_sec) >= 2) {
1953 /*
1954 * if delta_delta is too large, assume time correction
1955 * has occurred and set old_delta to the current delta.
1956 */
1957 old_delta = delta;
1958 } else {
1959 /* Otherwise try to adjust old_system to compensate */
1960 timekeeping_suspend_time =
1961 timespec64_add(timekeeping_suspend_time, delta_delta);
1962 }
1963 }
1964
1965 timekeeping_update_from_shadow(&tk_core, 0);
1966 halt_fast_timekeeper(tks);
1967 raw_spin_unlock_irqrestore(&tk_core.lock, flags);
1968
1969 tick_suspend();
1970 clocksource_suspend();
1971 clockevents_suspend();
1972
1973 return 0;
1974}
1975
1976/* sysfs resume/suspend bits for timekeeping */
1977static struct syscore_ops timekeeping_syscore_ops = {
1978 .resume = timekeeping_resume,
1979 .suspend = timekeeping_suspend,
1980};
1981
1982static int __init timekeeping_init_ops(void)
1983{
1984 register_syscore_ops(&timekeeping_syscore_ops);
1985 return 0;
1986}
1987device_initcall(timekeeping_init_ops);
1988
1989/*
1990 * Apply a multiplier adjustment to the timekeeper
1991 */
1992static __always_inline void timekeeping_apply_adjustment(struct timekeeper *tk,
1993 s64 offset,
1994 s32 mult_adj)
1995{
1996 s64 interval = tk->cycle_interval;
1997
1998 if (mult_adj == 0) {
1999 return;
2000 } else if (mult_adj == -1) {
2001 interval = -interval;
2002 offset = -offset;
2003 } else if (mult_adj != 1) {
2004 interval *= mult_adj;
2005 offset *= mult_adj;
2006 }
2007
2008 /*
2009 * So the following can be confusing.
2010 *
2011 * To keep things simple, lets assume mult_adj == 1 for now.
2012 *
2013 * When mult_adj != 1, remember that the interval and offset values
2014 * have been appropriately scaled so the math is the same.
2015 *
2016 * The basic idea here is that we're increasing the multiplier
2017 * by one, this causes the xtime_interval to be incremented by
2018 * one cycle_interval. This is because:
2019 * xtime_interval = cycle_interval * mult
2020 * So if mult is being incremented by one:
2021 * xtime_interval = cycle_interval * (mult + 1)
2022 * Its the same as:
2023 * xtime_interval = (cycle_interval * mult) + cycle_interval
2024 * Which can be shortened to:
2025 * xtime_interval += cycle_interval
2026 *
2027 * So offset stores the non-accumulated cycles. Thus the current
2028 * time (in shifted nanoseconds) is:
2029 * now = (offset * adj) + xtime_nsec
2030 * Now, even though we're adjusting the clock frequency, we have
2031 * to keep time consistent. In other words, we can't jump back
2032 * in time, and we also want to avoid jumping forward in time.
2033 *
2034 * So given the same offset value, we need the time to be the same
2035 * both before and after the freq adjustment.
2036 * now = (offset * adj_1) + xtime_nsec_1
2037 * now = (offset * adj_2) + xtime_nsec_2
2038 * So:
2039 * (offset * adj_1) + xtime_nsec_1 =
2040 * (offset * adj_2) + xtime_nsec_2
2041 * And we know:
2042 * adj_2 = adj_1 + 1
2043 * So:
2044 * (offset * adj_1) + xtime_nsec_1 =
2045 * (offset * (adj_1+1)) + xtime_nsec_2
2046 * (offset * adj_1) + xtime_nsec_1 =
2047 * (offset * adj_1) + offset + xtime_nsec_2
2048 * Canceling the sides:
2049 * xtime_nsec_1 = offset + xtime_nsec_2
2050 * Which gives us:
2051 * xtime_nsec_2 = xtime_nsec_1 - offset
2052 * Which simplifies to:
2053 * xtime_nsec -= offset
2054 */
2055 if ((mult_adj > 0) && (tk->tkr_mono.mult + mult_adj < mult_adj)) {
2056 /* NTP adjustment caused clocksource mult overflow */
2057 WARN_ON_ONCE(1);
2058 return;
2059 }
2060
2061 tk->tkr_mono.mult += mult_adj;
2062 tk->xtime_interval += interval;
2063 tk->tkr_mono.xtime_nsec -= offset;
2064}
2065
2066/*
2067 * Adjust the timekeeper's multiplier to the correct frequency
2068 * and also to reduce the accumulated error value.
2069 */
2070static void timekeeping_adjust(struct timekeeper *tk, s64 offset)
2071{
2072 u64 ntp_tl = ntp_tick_length();
2073 u32 mult;
2074
2075 /*
2076 * Determine the multiplier from the current NTP tick length.
2077 * Avoid expensive division when the tick length doesn't change.
2078 */
2079 if (likely(tk->ntp_tick == ntp_tl)) {
2080 mult = tk->tkr_mono.mult - tk->ntp_err_mult;
2081 } else {
2082 tk->ntp_tick = ntp_tl;
2083 mult = div64_u64((tk->ntp_tick >> tk->ntp_error_shift) -
2084 tk->xtime_remainder, tk->cycle_interval);
2085 }
2086
2087 /*
2088 * If the clock is behind the NTP time, increase the multiplier by 1
2089 * to catch up with it. If it's ahead and there was a remainder in the
2090 * tick division, the clock will slow down. Otherwise it will stay
2091 * ahead until the tick length changes to a non-divisible value.
2092 */
2093 tk->ntp_err_mult = tk->ntp_error > 0 ? 1 : 0;
2094 mult += tk->ntp_err_mult;
2095
2096 timekeeping_apply_adjustment(tk, offset, mult - tk->tkr_mono.mult);
2097
2098 if (unlikely(tk->tkr_mono.clock->maxadj &&
2099 (abs(tk->tkr_mono.mult - tk->tkr_mono.clock->mult)
2100 > tk->tkr_mono.clock->maxadj))) {
2101 printk_once(KERN_WARNING
2102 "Adjusting %s more than 11%% (%ld vs %ld)\n",
2103 tk->tkr_mono.clock->name, (long)tk->tkr_mono.mult,
2104 (long)tk->tkr_mono.clock->mult + tk->tkr_mono.clock->maxadj);
2105 }
2106
2107 /*
2108 * It may be possible that when we entered this function, xtime_nsec
2109 * was very small. Further, if we're slightly speeding the clocksource
2110 * in the code above, its possible the required corrective factor to
2111 * xtime_nsec could cause it to underflow.
2112 *
2113 * Now, since we have already accumulated the second and the NTP
2114 * subsystem has been notified via second_overflow(), we need to skip
2115 * the next update.
2116 */
2117 if (unlikely((s64)tk->tkr_mono.xtime_nsec < 0)) {
2118 tk->tkr_mono.xtime_nsec += (u64)NSEC_PER_SEC <<
2119 tk->tkr_mono.shift;
2120 tk->xtime_sec--;
2121 tk->skip_second_overflow = 1;
2122 }
2123}
2124
2125/*
2126 * accumulate_nsecs_to_secs - Accumulates nsecs into secs
2127 *
2128 * Helper function that accumulates the nsecs greater than a second
2129 * from the xtime_nsec field to the xtime_secs field.
2130 * It also calls into the NTP code to handle leapsecond processing.
2131 */
2132static inline unsigned int accumulate_nsecs_to_secs(struct timekeeper *tk)
2133{
2134 u64 nsecps = (u64)NSEC_PER_SEC << tk->tkr_mono.shift;
2135 unsigned int clock_set = 0;
2136
2137 while (tk->tkr_mono.xtime_nsec >= nsecps) {
2138 int leap;
2139
2140 tk->tkr_mono.xtime_nsec -= nsecps;
2141 tk->xtime_sec++;
2142
2143 /*
2144 * Skip NTP update if this second was accumulated before,
2145 * i.e. xtime_nsec underflowed in timekeeping_adjust()
2146 */
2147 if (unlikely(tk->skip_second_overflow)) {
2148 tk->skip_second_overflow = 0;
2149 continue;
2150 }
2151
2152 /* Figure out if its a leap sec and apply if needed */
2153 leap = second_overflow(tk->xtime_sec);
2154 if (unlikely(leap)) {
2155 struct timespec64 ts;
2156
2157 tk->xtime_sec += leap;
2158
2159 ts.tv_sec = leap;
2160 ts.tv_nsec = 0;
2161 tk_set_wall_to_mono(tk,
2162 timespec64_sub(tk->wall_to_monotonic, ts));
2163
2164 __timekeeping_set_tai_offset(tk, tk->tai_offset - leap);
2165
2166 clock_set = TK_CLOCK_WAS_SET;
2167 }
2168 }
2169 return clock_set;
2170}
2171
2172/*
2173 * logarithmic_accumulation - shifted accumulation of cycles
2174 *
2175 * This functions accumulates a shifted interval of cycles into
2176 * a shifted interval nanoseconds. Allows for O(log) accumulation
2177 * loop.
2178 *
2179 * Returns the unconsumed cycles.
2180 */
2181static u64 logarithmic_accumulation(struct timekeeper *tk, u64 offset,
2182 u32 shift, unsigned int *clock_set)
2183{
2184 u64 interval = tk->cycle_interval << shift;
2185 u64 snsec_per_sec;
2186
2187 /* If the offset is smaller than a shifted interval, do nothing */
2188 if (offset < interval)
2189 return offset;
2190
2191 /* Accumulate one shifted interval */
2192 offset -= interval;
2193 tk->tkr_mono.cycle_last += interval;
2194 tk->tkr_raw.cycle_last += interval;
2195
2196 tk->tkr_mono.xtime_nsec += tk->xtime_interval << shift;
2197 *clock_set |= accumulate_nsecs_to_secs(tk);
2198
2199 /* Accumulate raw time */
2200 tk->tkr_raw.xtime_nsec += tk->raw_interval << shift;
2201 snsec_per_sec = (u64)NSEC_PER_SEC << tk->tkr_raw.shift;
2202 while (tk->tkr_raw.xtime_nsec >= snsec_per_sec) {
2203 tk->tkr_raw.xtime_nsec -= snsec_per_sec;
2204 tk->raw_sec++;
2205 }
2206
2207 /* Accumulate error between NTP and clock interval */
2208 tk->ntp_error += tk->ntp_tick << shift;
2209 tk->ntp_error -= (tk->xtime_interval + tk->xtime_remainder) <<
2210 (tk->ntp_error_shift + shift);
2211
2212 return offset;
2213}
2214
2215/*
2216 * timekeeping_advance - Updates the timekeeper to the current time and
2217 * current NTP tick length
2218 */
2219static bool timekeeping_advance(enum timekeeping_adv_mode mode)
2220{
2221 struct timekeeper *tk = &tk_core.shadow_timekeeper;
2222 struct timekeeper *real_tk = &tk_core.timekeeper;
2223 unsigned int clock_set = 0;
2224 int shift = 0, maxshift;
2225 u64 offset;
2226
2227 guard(raw_spinlock_irqsave)(&tk_core.lock);
2228
2229 /* Make sure we're fully resumed: */
2230 if (unlikely(timekeeping_suspended))
2231 return false;
2232
2233 offset = clocksource_delta(tk_clock_read(&tk->tkr_mono),
2234 tk->tkr_mono.cycle_last, tk->tkr_mono.mask,
2235 tk->tkr_mono.clock->max_raw_delta);
2236
2237 /* Check if there's really nothing to do */
2238 if (offset < real_tk->cycle_interval && mode == TK_ADV_TICK)
2239 return false;
2240
2241 /*
2242 * With NO_HZ we may have to accumulate many cycle_intervals
2243 * (think "ticks") worth of time at once. To do this efficiently,
2244 * we calculate the largest doubling multiple of cycle_intervals
2245 * that is smaller than the offset. We then accumulate that
2246 * chunk in one go, and then try to consume the next smaller
2247 * doubled multiple.
2248 */
2249 shift = ilog2(offset) - ilog2(tk->cycle_interval);
2250 shift = max(0, shift);
2251 /* Bound shift to one less than what overflows tick_length */
2252 maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
2253 shift = min(shift, maxshift);
2254 while (offset >= tk->cycle_interval) {
2255 offset = logarithmic_accumulation(tk, offset, shift, &clock_set);
2256 if (offset < tk->cycle_interval<<shift)
2257 shift--;
2258 }
2259
2260 /* Adjust the multiplier to correct NTP error */
2261 timekeeping_adjust(tk, offset);
2262
2263 /*
2264 * Finally, make sure that after the rounding
2265 * xtime_nsec isn't larger than NSEC_PER_SEC
2266 */
2267 clock_set |= accumulate_nsecs_to_secs(tk);
2268
2269 timekeeping_update_from_shadow(&tk_core, clock_set);
2270
2271 return !!clock_set;
2272}
2273
2274/**
2275 * update_wall_time - Uses the current clocksource to increment the wall time
2276 *
2277 */
2278void update_wall_time(void)
2279{
2280 if (timekeeping_advance(TK_ADV_TICK))
2281 clock_was_set_delayed();
2282}
2283
2284/**
2285 * getboottime64 - Return the real time of system boot.
2286 * @ts: pointer to the timespec64 to be set
2287 *
2288 * Returns the wall-time of boot in a timespec64.
2289 *
2290 * This is based on the wall_to_monotonic offset and the total suspend
2291 * time. Calls to settimeofday will affect the value returned (which
2292 * basically means that however wrong your real time clock is at boot time,
2293 * you get the right time here).
2294 */
2295void getboottime64(struct timespec64 *ts)
2296{
2297 struct timekeeper *tk = &tk_core.timekeeper;
2298 ktime_t t = ktime_sub(tk->offs_real, tk->offs_boot);
2299
2300 *ts = ktime_to_timespec64(t);
2301}
2302EXPORT_SYMBOL_GPL(getboottime64);
2303
2304void ktime_get_coarse_real_ts64(struct timespec64 *ts)
2305{
2306 struct timekeeper *tk = &tk_core.timekeeper;
2307 unsigned int seq;
2308
2309 do {
2310 seq = read_seqcount_begin(&tk_core.seq);
2311
2312 *ts = tk_xtime(tk);
2313 } while (read_seqcount_retry(&tk_core.seq, seq));
2314}
2315EXPORT_SYMBOL(ktime_get_coarse_real_ts64);
2316
2317/**
2318 * ktime_get_coarse_real_ts64_mg - return latter of coarse grained time or floor
2319 * @ts: timespec64 to be filled
2320 *
2321 * Fetch the global mg_floor value, convert it to realtime and compare it
2322 * to the current coarse-grained time. Fill @ts with whichever is
2323 * latest. Note that this is a filesystem-specific interface and should be
2324 * avoided outside of that context.
2325 */
2326void ktime_get_coarse_real_ts64_mg(struct timespec64 *ts)
2327{
2328 struct timekeeper *tk = &tk_core.timekeeper;
2329 u64 floor = atomic64_read(&mg_floor);
2330 ktime_t f_real, offset, coarse;
2331 unsigned int seq;
2332
2333 do {
2334 seq = read_seqcount_begin(&tk_core.seq);
2335 *ts = tk_xtime(tk);
2336 offset = tk_core.timekeeper.offs_real;
2337 } while (read_seqcount_retry(&tk_core.seq, seq));
2338
2339 coarse = timespec64_to_ktime(*ts);
2340 f_real = ktime_add(floor, offset);
2341 if (ktime_after(f_real, coarse))
2342 *ts = ktime_to_timespec64(f_real);
2343}
2344
2345/**
2346 * ktime_get_real_ts64_mg - attempt to update floor value and return result
2347 * @ts: pointer to the timespec to be set
2348 *
2349 * Get a monotonic fine-grained time value and attempt to swap it into
2350 * mg_floor. If that succeeds then accept the new floor value. If it fails
2351 * then another task raced in during the interim time and updated the
2352 * floor. Since any update to the floor must be later than the previous
2353 * floor, either outcome is acceptable.
2354 *
2355 * Typically this will be called after calling ktime_get_coarse_real_ts64_mg(),
2356 * and determining that the resulting coarse-grained timestamp did not effect
2357 * a change in ctime. Any more recent floor value would effect a change to
2358 * ctime, so there is no need to retry the atomic64_try_cmpxchg() on failure.
2359 *
2360 * @ts will be filled with the latest floor value, regardless of the outcome of
2361 * the cmpxchg. Note that this is a filesystem specific interface and should be
2362 * avoided outside of that context.
2363 */
2364void ktime_get_real_ts64_mg(struct timespec64 *ts)
2365{
2366 struct timekeeper *tk = &tk_core.timekeeper;
2367 ktime_t old = atomic64_read(&mg_floor);
2368 ktime_t offset, mono;
2369 unsigned int seq;
2370 u64 nsecs;
2371
2372 do {
2373 seq = read_seqcount_begin(&tk_core.seq);
2374
2375 ts->tv_sec = tk->xtime_sec;
2376 mono = tk->tkr_mono.base;
2377 nsecs = timekeeping_get_ns(&tk->tkr_mono);
2378 offset = tk_core.timekeeper.offs_real;
2379 } while (read_seqcount_retry(&tk_core.seq, seq));
2380
2381 mono = ktime_add_ns(mono, nsecs);
2382
2383 /*
2384 * Attempt to update the floor with the new time value. As any
2385 * update must be later then the existing floor, and would effect
2386 * a change to ctime from the perspective of the current task,
2387 * accept the resulting floor value regardless of the outcome of
2388 * the swap.
2389 */
2390 if (atomic64_try_cmpxchg(&mg_floor, &old, mono)) {
2391 ts->tv_nsec = 0;
2392 timespec64_add_ns(ts, nsecs);
2393 timekeeping_inc_mg_floor_swaps();
2394 } else {
2395 /*
2396 * Another task changed mg_floor since "old" was fetched.
2397 * "old" has been updated with the latest value of "mg_floor".
2398 * That value is newer than the previous floor value, which
2399 * is enough to effect a change to ctime. Accept it.
2400 */
2401 *ts = ktime_to_timespec64(ktime_add(old, offset));
2402 }
2403}
2404
2405void ktime_get_coarse_ts64(struct timespec64 *ts)
2406{
2407 struct timekeeper *tk = &tk_core.timekeeper;
2408 struct timespec64 now, mono;
2409 unsigned int seq;
2410
2411 do {
2412 seq = read_seqcount_begin(&tk_core.seq);
2413
2414 now = tk_xtime(tk);
2415 mono = tk->wall_to_monotonic;
2416 } while (read_seqcount_retry(&tk_core.seq, seq));
2417
2418 set_normalized_timespec64(ts, now.tv_sec + mono.tv_sec,
2419 now.tv_nsec + mono.tv_nsec);
2420}
2421EXPORT_SYMBOL(ktime_get_coarse_ts64);
2422
2423/*
2424 * Must hold jiffies_lock
2425 */
2426void do_timer(unsigned long ticks)
2427{
2428 jiffies_64 += ticks;
2429 calc_global_load();
2430}
2431
2432/**
2433 * ktime_get_update_offsets_now - hrtimer helper
2434 * @cwsseq: pointer to check and store the clock was set sequence number
2435 * @offs_real: pointer to storage for monotonic -> realtime offset
2436 * @offs_boot: pointer to storage for monotonic -> boottime offset
2437 * @offs_tai: pointer to storage for monotonic -> clock tai offset
2438 *
2439 * Returns current monotonic time and updates the offsets if the
2440 * sequence number in @cwsseq and timekeeper.clock_was_set_seq are
2441 * different.
2442 *
2443 * Called from hrtimer_interrupt() or retrigger_next_event()
2444 */
2445ktime_t ktime_get_update_offsets_now(unsigned int *cwsseq, ktime_t *offs_real,
2446 ktime_t *offs_boot, ktime_t *offs_tai)
2447{
2448 struct timekeeper *tk = &tk_core.timekeeper;
2449 unsigned int seq;
2450 ktime_t base;
2451 u64 nsecs;
2452
2453 do {
2454 seq = read_seqcount_begin(&tk_core.seq);
2455
2456 base = tk->tkr_mono.base;
2457 nsecs = timekeeping_get_ns(&tk->tkr_mono);
2458 base = ktime_add_ns(base, nsecs);
2459
2460 if (*cwsseq != tk->clock_was_set_seq) {
2461 *cwsseq = tk->clock_was_set_seq;
2462 *offs_real = tk->offs_real;
2463 *offs_boot = tk->offs_boot;
2464 *offs_tai = tk->offs_tai;
2465 }
2466
2467 /* Handle leapsecond insertion adjustments */
2468 if (unlikely(base >= tk->next_leap_ktime))
2469 *offs_real = ktime_sub(tk->offs_real, ktime_set(1, 0));
2470
2471 } while (read_seqcount_retry(&tk_core.seq, seq));
2472
2473 return base;
2474}
2475
2476/*
2477 * timekeeping_validate_timex - Ensures the timex is ok for use in do_adjtimex
2478 */
2479static int timekeeping_validate_timex(const struct __kernel_timex *txc)
2480{
2481 if (txc->modes & ADJ_ADJTIME) {
2482 /* singleshot must not be used with any other mode bits */
2483 if (!(txc->modes & ADJ_OFFSET_SINGLESHOT))
2484 return -EINVAL;
2485 if (!(txc->modes & ADJ_OFFSET_READONLY) &&
2486 !capable(CAP_SYS_TIME))
2487 return -EPERM;
2488 } else {
2489 /* In order to modify anything, you gotta be super-user! */
2490 if (txc->modes && !capable(CAP_SYS_TIME))
2491 return -EPERM;
2492 /*
2493 * if the quartz is off by more than 10% then
2494 * something is VERY wrong!
2495 */
2496 if (txc->modes & ADJ_TICK &&
2497 (txc->tick < 900000/USER_HZ ||
2498 txc->tick > 1100000/USER_HZ))
2499 return -EINVAL;
2500 }
2501
2502 if (txc->modes & ADJ_SETOFFSET) {
2503 /* In order to inject time, you gotta be super-user! */
2504 if (!capable(CAP_SYS_TIME))
2505 return -EPERM;
2506
2507 /*
2508 * Validate if a timespec/timeval used to inject a time
2509 * offset is valid. Offsets can be positive or negative, so
2510 * we don't check tv_sec. The value of the timeval/timespec
2511 * is the sum of its fields,but *NOTE*:
2512 * The field tv_usec/tv_nsec must always be non-negative and
2513 * we can't have more nanoseconds/microseconds than a second.
2514 */
2515 if (txc->time.tv_usec < 0)
2516 return -EINVAL;
2517
2518 if (txc->modes & ADJ_NANO) {
2519 if (txc->time.tv_usec >= NSEC_PER_SEC)
2520 return -EINVAL;
2521 } else {
2522 if (txc->time.tv_usec >= USEC_PER_SEC)
2523 return -EINVAL;
2524 }
2525 }
2526
2527 /*
2528 * Check for potential multiplication overflows that can
2529 * only happen on 64-bit systems:
2530 */
2531 if ((txc->modes & ADJ_FREQUENCY) && (BITS_PER_LONG == 64)) {
2532 if (LLONG_MIN / PPM_SCALE > txc->freq)
2533 return -EINVAL;
2534 if (LLONG_MAX / PPM_SCALE < txc->freq)
2535 return -EINVAL;
2536 }
2537
2538 return 0;
2539}
2540
2541/**
2542 * random_get_entropy_fallback - Returns the raw clock source value,
2543 * used by random.c for platforms with no valid random_get_entropy().
2544 */
2545unsigned long random_get_entropy_fallback(void)
2546{
2547 struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
2548 struct clocksource *clock = READ_ONCE(tkr->clock);
2549
2550 if (unlikely(timekeeping_suspended || !clock))
2551 return 0;
2552 return clock->read(clock);
2553}
2554EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
2555
2556/**
2557 * do_adjtimex() - Accessor function to NTP __do_adjtimex function
2558 * @txc: Pointer to kernel_timex structure containing NTP parameters
2559 */
2560int do_adjtimex(struct __kernel_timex *txc)
2561{
2562 struct audit_ntp_data ad;
2563 bool offset_set = false;
2564 bool clock_set = false;
2565 struct timespec64 ts;
2566 int ret;
2567
2568 /* Validate the data before disabling interrupts */
2569 ret = timekeeping_validate_timex(txc);
2570 if (ret)
2571 return ret;
2572 add_device_randomness(txc, sizeof(*txc));
2573
2574 if (txc->modes & ADJ_SETOFFSET) {
2575 struct timespec64 delta;
2576
2577 delta.tv_sec = txc->time.tv_sec;
2578 delta.tv_nsec = txc->time.tv_usec;
2579 if (!(txc->modes & ADJ_NANO))
2580 delta.tv_nsec *= 1000;
2581 ret = timekeeping_inject_offset(&delta);
2582 if (ret)
2583 return ret;
2584
2585 offset_set = delta.tv_sec != 0;
2586 audit_tk_injoffset(delta);
2587 }
2588
2589 audit_ntp_init(&ad);
2590
2591 ktime_get_real_ts64(&ts);
2592 add_device_randomness(&ts, sizeof(ts));
2593
2594 scoped_guard (raw_spinlock_irqsave, &tk_core.lock) {
2595 struct timekeeper *tks = &tk_core.shadow_timekeeper;
2596 s32 orig_tai, tai;
2597
2598 orig_tai = tai = tks->tai_offset;
2599 ret = __do_adjtimex(txc, &ts, &tai, &ad);
2600
2601 if (tai != orig_tai) {
2602 __timekeeping_set_tai_offset(tks, tai);
2603 timekeeping_update_from_shadow(&tk_core, TK_CLOCK_WAS_SET);
2604 clock_set = true;
2605 } else {
2606 tk_update_leap_state_all(&tk_core);
2607 }
2608 }
2609
2610 audit_ntp_log(&ad);
2611
2612 /* Update the multiplier immediately if frequency was set directly */
2613 if (txc->modes & (ADJ_FREQUENCY | ADJ_TICK))
2614 clock_set |= timekeeping_advance(TK_ADV_FREQ);
2615
2616 if (clock_set)
2617 clock_was_set(CLOCK_SET_WALL);
2618
2619 ntp_notify_cmos_timer(offset_set);
2620
2621 return ret;
2622}
2623
2624#ifdef CONFIG_NTP_PPS
2625/**
2626 * hardpps() - Accessor function to NTP __hardpps function
2627 * @phase_ts: Pointer to timespec64 structure representing phase timestamp
2628 * @raw_ts: Pointer to timespec64 structure representing raw timestamp
2629 */
2630void hardpps(const struct timespec64 *phase_ts, const struct timespec64 *raw_ts)
2631{
2632 guard(raw_spinlock_irqsave)(&tk_core.lock);
2633 __hardpps(phase_ts, raw_ts);
2634}
2635EXPORT_SYMBOL(hardpps);
2636#endif /* CONFIG_NTP_PPS */