Linux Audio

Check our new training course

Loading...
v3.15
  1menu "Board support"
  2
  3config SOLUTION_ENGINE
  4	bool
  5
  6config SH_ALPHA_BOARD
  7	bool
  8
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  9config SH_SOLUTION_ENGINE
 10	bool "SolutionEngine"
 11	select SOLUTION_ENGINE
 12	select CPU_HAS_IPR_IRQ
 13	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
 14	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
 15	  CPU_SUBTYPE_SH7750R 
 16	help
 17	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
 18	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
 19
 20config SH_7206_SOLUTION_ENGINE
 21	bool "SolutionEngine7206"
 22	select SOLUTION_ENGINE
 23	depends on CPU_SUBTYPE_SH7206
 24	help
 25	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
 26	  evaluation board.
 27
 28config SH_7619_SOLUTION_ENGINE
 29	bool "SolutionEngine7619"
 30	select SOLUTION_ENGINE
 31	depends on CPU_SUBTYPE_SH7619
 32	help
 33	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 34	  evaluation board.
 35	
 36config SH_7721_SOLUTION_ENGINE
 37	bool "SolutionEngine7721"
 38	select SOLUTION_ENGINE
 39	depends on CPU_SUBTYPE_SH7721
 40	help
 41	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
 42	  evaluation board.
 43
 44config SH_7722_SOLUTION_ENGINE
 45	bool "SolutionEngine7722"
 46	select SOLUTION_ENGINE
 47	select GENERIC_IRQ_CHIP
 48	select IRQ_DOMAIN
 49	depends on CPU_SUBTYPE_SH7722
 50	help
 51	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
 52	  evaluation board.
 53
 54config SH_7724_SOLUTION_ENGINE
 55	bool "SolutionEngine7724"
 56	select SOLUTION_ENGINE
 57	depends on CPU_SUBTYPE_SH7724
 58	select ARCH_REQUIRE_GPIOLIB
 59	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 60	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 61	help
 62	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
 63	  evaluation board.
 64
 65config SH_7751_SOLUTION_ENGINE
 66	bool "SolutionEngine7751"
 67	select SOLUTION_ENGINE
 68	select CPU_HAS_IPR_IRQ
 69	depends on CPU_SUBTYPE_SH7751
 70	help
 71	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
 72	  evaluation board.
 73	  
 74config SH_7780_SOLUTION_ENGINE
 75	bool "SolutionEngine7780"
 76	select SOLUTION_ENGINE
 77	select SYS_SUPPORTS_PCI
 78	depends on CPU_SUBTYPE_SH7780
 79	help
 80	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
 81	  evaluation board.
 82
 83config SH_7343_SOLUTION_ENGINE
 84	bool "SolutionEngine7343"
 85	select SOLUTION_ENGINE
 86	select GENERIC_IRQ_CHIP
 87	select IRQ_DOMAIN
 88	depends on CPU_SUBTYPE_SH7343
 89	help
 90	  Select 7343 SolutionEngine if configuring for a Hitachi
 91	  SH7343 (SH-Mobile 3AS) evaluation board.
 92
 93config SH_HP6XX
 94	bool "HP6XX"
 95	select SYS_SUPPORTS_APM_EMULATION
 96	select HD6446X_SERIES
 97	depends on CPU_SUBTYPE_SH7709
 98	help
 99	  Select HP6XX if configuring for a HP jornada HP6xx.
100	  More information (hardware only) at
101	  <http://www.hp.com/jornada/>.
102
103config SH_DREAMCAST
104	bool "Dreamcast"
105	select SYS_SUPPORTS_PCI
106	depends on CPU_SUBTYPE_SH7091
107	help
108	  Select Dreamcast if configuring for a SEGA Dreamcast.
109	  More information at <http://www.linux-sh.org>
110
111config SH_SH03
112	bool "Interface CTP/PCI-SH03"
113	depends on CPU_SUBTYPE_SH7751
114	select CPU_HAS_IPR_IRQ
115	select SYS_SUPPORTS_PCI
116	help
117	  CTP/PCI-SH03 is a CPU module computer that is produced
118	  by Interface Corporation.
119	  More information at <http://www.interface.co.jp>
120
121config SH_SECUREEDGE5410
122	bool "SecureEdge5410"
123	depends on CPU_SUBTYPE_SH7751R
124	select CPU_HAS_IPR_IRQ
125	select SYS_SUPPORTS_PCI
126	help
127	  Select SecureEdge5410 if configuring for a SnapGear SH board.
128	  This includes both the OEM SecureEdge products as well as the
129	  SME product line.
130
131config SH_RTS7751R2D
132	bool "RTS7751R2D"
133	depends on CPU_SUBTYPE_SH7751R
134	select SYS_SUPPORTS_PCI
135	select IO_TRAPPED if MMU
136	help
137	  Select RTS7751R2D if configuring for a Renesas Technology
138	  Sales SH-Graphics board.
139
140config SH_RSK
141	bool "Renesas Starter Kit"
142	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
143	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
144	select REGULATOR_FIXED_VOLTAGE if REGULATOR
145	help
146	 Select this option if configuring for any of the RSK+ MCU
147	 evaluation platforms.
148
149config SH_SDK7780
150	bool "SDK7780R3"
151	depends on CPU_SUBTYPE_SH7780
152	select SYS_SUPPORTS_PCI
153	help
154	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
155	  evaluation board.
156
157config SH_SDK7786
158	bool "SDK7786"
159	depends on CPU_SUBTYPE_SH7786
160	select SYS_SUPPORTS_PCI
161	select NO_IOPORT_MAP if !PCI
162	select ARCH_WANT_OPTIONAL_GPIOLIB
163	select HAVE_SRAM_POOL
164	select REGULATOR_FIXED_VOLTAGE if REGULATOR
165	help
166	  Select SDK7786 if configuring for a Renesas Technology Europe
167	  SH7786-65nm board.
168
169config SH_HIGHLANDER
170	bool "Highlander"
171	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
172	select SYS_SUPPORTS_PCI
173	select IO_TRAPPED if MMU
174
175config SH_SH7757LCR
176	bool "SH7757LCR"
177	depends on CPU_SUBTYPE_SH7757
178	select ARCH_REQUIRE_GPIOLIB
179	select REGULATOR_FIXED_VOLTAGE if REGULATOR
180
181config SH_SH7785LCR
182	bool "SH7785LCR"
183	depends on CPU_SUBTYPE_SH7785
184	select SYS_SUPPORTS_PCI
185
186config SH_SH7785LCR_29BIT_PHYSMAPS
187	bool "SH7785LCR 29bit physmaps"
188	depends on SH_SH7785LCR && 29BIT
189	default y
190	help
191	  This board has 2 physical memory maps. It can be changed with
192	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
193	  you can access all on-board device in 29bit address mode.
194
195config SH_SH7785LCR_PT
196	bool "SH7785LCR prototype board on 32-bit MMU mode"
197	depends on SH_SH7785LCR && 32BIT
198	default n
199	help
200	  If you use prototype board, this option is enabled.
201
202config SH_URQUELL
203	bool "Urquell"
204	depends on CPU_SUBTYPE_SH7786
205	select ARCH_REQUIRE_GPIOLIB
206	select SYS_SUPPORTS_PCI
207	select NO_IOPORT_MAP if !PCI
208
209config SH_MIGOR
210	bool "Migo-R"
211	depends on CPU_SUBTYPE_SH7722
212	select ARCH_REQUIRE_GPIOLIB
213	select REGULATOR_FIXED_VOLTAGE if REGULATOR
214	help
215	  Select Migo-R if configuring for the SH7722 Migo-R platform
216          by Renesas System Solutions Asia Pte. Ltd.
217
218config SH_AP325RXA
219	bool "AP-325RXA"
220	depends on CPU_SUBTYPE_SH7723
221	select ARCH_REQUIRE_GPIOLIB
222	select REGULATOR_FIXED_VOLTAGE if REGULATOR
223	help
224	  Renesas "AP-325RXA" support.
225	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
226
227config SH_KFR2R09
228	bool "KFR2R09"
229	depends on CPU_SUBTYPE_SH7724
230	select ARCH_REQUIRE_GPIOLIB
231	select REGULATOR_FIXED_VOLTAGE if REGULATOR
232	help
233	  "Kit For R2R for 2009" support.
234
235config SH_ECOVEC
236	bool "EcoVec"
237	depends on CPU_SUBTYPE_SH7724
238	select ARCH_REQUIRE_GPIOLIB
239	select SND_SOC_DA7210 if SND_SIMPLE_CARD
240	select REGULATOR_FIXED_VOLTAGE if REGULATOR
241	help
242	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
243
244config SH_SH7763RDP
245	bool "SH7763RDP"
246	depends on CPU_SUBTYPE_SH7763
247	help
248	  Select SH7763RDP if configuring for a Renesas SH7763
249	  evaluation board.
250
251config SH_ESPT
252	bool "ESPT"
253	depends on CPU_SUBTYPE_SH7763
254	help
255	  Select ESPT if configuring for a Renesas SH7763
256	  with gigabit ether evaluation board.
257
258config SH_EDOSK7705
259	bool "EDOSK7705"
260	depends on CPU_SUBTYPE_SH7705
261
262config SH_EDOSK7760
263	bool "EDOSK7760"
264	depends on CPU_SUBTYPE_SH7760
265	help
266	  Select if configuring for a Renesas EDOSK7760
267	  evaluation board.
268
269config SH_SH4202_MICRODEV
270	bool "SH4-202 MicroDev"
271	depends on CPU_SUBTYPE_SH4_202
272	help
273	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
274	  with an SH4-202 CPU.
275
276config SH_LANDISK
277	bool "LANDISK"
278	depends on CPU_SUBTYPE_SH7751R
279	select SYS_SUPPORTS_PCI
280	help
281	  I-O DATA DEVICE, INC. "LANDISK Series" support.
282
283config SH_TITAN
284	bool "TITAN"
285	depends on CPU_SUBTYPE_SH7751R
286	select CPU_HAS_IPR_IRQ
287	select SYS_SUPPORTS_PCI
288	help
289	  Select Titan if you are configuring for a Nimble Microsystems
290	  NetEngine NP51R.
291
292config SH_SHMIN
293	bool "SHMIN"
294	depends on CPU_SUBTYPE_SH7706
295	select CPU_HAS_IPR_IRQ
296	help
297	  Select SHMIN if configuring for the SHMIN board.
298
299config SH_LBOX_RE2
300	bool "L-BOX RE2"
301	depends on CPU_SUBTYPE_SH7751R
302	select SYS_SUPPORTS_PCI
303	help
304	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
305
306config SH_X3PROTO
307	bool "SH-X3 Prototype board"
308	depends on CPU_SUBTYPE_SHX3
309	select NO_IOPORT_MAP if !PCI
310	select IRQ_DOMAIN
311
312config SH_MAGIC_PANEL_R2
313	bool "Magic Panel R2"
314	depends on CPU_SUBTYPE_SH7720
315	select ARCH_REQUIRE_GPIOLIB
316	select REGULATOR_FIXED_VOLTAGE if REGULATOR
317	help
318	  Select Magic Panel R2 if configuring for Magic Panel R2.
319
320config SH_CAYMAN
321	bool "Hitachi Cayman"
322	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
323	select SYS_SUPPORTS_PCI
324	select ARCH_MIGHT_HAVE_PC_SERIO
325
326config SH_POLARIS
327	bool "SMSC Polaris"
328	select CPU_HAS_IPR_IRQ
329	select REGULATOR_FIXED_VOLTAGE if REGULATOR
330	depends on CPU_SUBTYPE_SH7709
331	help
332	  Select if configuring for an SMSC Polaris development board
333
334config SH_SH2007
335	bool "SH-2007 board"
336	select NO_IOPORT_MAP
337	select REGULATOR_FIXED_VOLTAGE if REGULATOR
338	depends on CPU_SUBTYPE_SH7780
339	help
340	  SH-2007 is a single-board computer based around SH7780 chip
341	  intended for embedded applications.
342	  It has an Ethernet interface (SMC9118), direct connected
343	  Compact Flash socket, two serial ports and PC-104 bus.
344	  More information at <http://sh2000.sh-linux.org>.
345
346config SH_APSH4A3A
347	bool "AP-SH4A-3A"
348	select SH_ALPHA_BOARD
349	select REGULATOR_FIXED_VOLTAGE if REGULATOR
350	depends on CPU_SUBTYPE_SH7785
351	help
352	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
353
354config SH_APSH4AD0A
355	bool "AP-SH4AD-0A"
356	select SH_ALPHA_BOARD
357	select SYS_SUPPORTS_PCI
358	select REGULATOR_FIXED_VOLTAGE if REGULATOR
359	depends on CPU_SUBTYPE_SH7786
360	help
361	  Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
362
363source "arch/sh/boards/mach-r2d/Kconfig"
364source "arch/sh/boards/mach-highlander/Kconfig"
365source "arch/sh/boards/mach-sdk7780/Kconfig"
366source "arch/sh/boards/mach-migor/Kconfig"
367source "arch/sh/boards/mach-rsk/Kconfig"
368
369if SH_MAGIC_PANEL_R2
370
371menu "Magic Panel R2 options"
372
373config SH_MAGIC_PANEL_R2_VERSION
374	int SH_MAGIC_PANEL_R2_VERSION
375	default "3"
376	help
377	  Set the version of the Magic Panel R2
378
379endmenu
380
381endif
382
383endmenu
v4.6
  1menu "Board support"
  2
  3config SOLUTION_ENGINE
  4	bool
  5
  6config SH_ALPHA_BOARD
  7	bool
  8
  9config SH_DEVICE_TREE
 10	bool "Board Described by Device Tree"
 11	select OF
 12	select OF_EARLY_FLATTREE
 13	select CLKSRC_OF
 14	select GENERIC_CALIBRATE_DELAY
 15	help
 16	  Select Board Described by Device Tree to build a kernel that
 17	  does not hard-code any board-specific knowledge but instead uses
 18	  a device tree blob provided by the boot-loader. You must enable
 19	  drivers for any hardware you want to use separately. At this
 20	  time, only boards based on the open-hardware J-Core processors
 21	  have sufficient driver coverage to use this option; do not
 22	  select it if you are using original SuperH hardware.
 23
 24config SH_SOLUTION_ENGINE
 25	bool "SolutionEngine"
 26	select SOLUTION_ENGINE
 27	select CPU_HAS_IPR_IRQ
 28	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
 29	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
 30	  CPU_SUBTYPE_SH7750R 
 31	help
 32	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
 33	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
 34
 35config SH_7206_SOLUTION_ENGINE
 36	bool "SolutionEngine7206"
 37	select SOLUTION_ENGINE
 38	depends on CPU_SUBTYPE_SH7206
 39	help
 40	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
 41	  evaluation board.
 42
 43config SH_7619_SOLUTION_ENGINE
 44	bool "SolutionEngine7619"
 45	select SOLUTION_ENGINE
 46	depends on CPU_SUBTYPE_SH7619
 47	help
 48	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 49	  evaluation board.
 50	
 51config SH_7721_SOLUTION_ENGINE
 52	bool "SolutionEngine7721"
 53	select SOLUTION_ENGINE
 54	depends on CPU_SUBTYPE_SH7721
 55	help
 56	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
 57	  evaluation board.
 58
 59config SH_7722_SOLUTION_ENGINE
 60	bool "SolutionEngine7722"
 61	select SOLUTION_ENGINE
 62	select GENERIC_IRQ_CHIP
 63	select IRQ_DOMAIN
 64	depends on CPU_SUBTYPE_SH7722
 65	help
 66	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
 67	  evaluation board.
 68
 69config SH_7724_SOLUTION_ENGINE
 70	bool "SolutionEngine7724"
 71	select SOLUTION_ENGINE
 72	depends on CPU_SUBTYPE_SH7724
 73	select ARCH_REQUIRE_GPIOLIB
 74	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 75	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 76	help
 77	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
 78	  evaluation board.
 79
 80config SH_7751_SOLUTION_ENGINE
 81	bool "SolutionEngine7751"
 82	select SOLUTION_ENGINE
 83	select CPU_HAS_IPR_IRQ
 84	depends on CPU_SUBTYPE_SH7751
 85	help
 86	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
 87	  evaluation board.
 88	  
 89config SH_7780_SOLUTION_ENGINE
 90	bool "SolutionEngine7780"
 91	select SOLUTION_ENGINE
 92	select SYS_SUPPORTS_PCI
 93	depends on CPU_SUBTYPE_SH7780
 94	help
 95	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
 96	  evaluation board.
 97
 98config SH_7343_SOLUTION_ENGINE
 99	bool "SolutionEngine7343"
100	select SOLUTION_ENGINE
101	select GENERIC_IRQ_CHIP
102	select IRQ_DOMAIN
103	depends on CPU_SUBTYPE_SH7343
104	help
105	  Select 7343 SolutionEngine if configuring for a Hitachi
106	  SH7343 (SH-Mobile 3AS) evaluation board.
107
108config SH_HP6XX
109	bool "HP6XX"
110	select SYS_SUPPORTS_APM_EMULATION
111	select HD6446X_SERIES
112	depends on CPU_SUBTYPE_SH7709
113	help
114	  Select HP6XX if configuring for a HP jornada HP6xx.
115	  More information (hardware only) at
116	  <http://www.hp.com/jornada/>.
117
118config SH_DREAMCAST
119	bool "Dreamcast"
120	select SYS_SUPPORTS_PCI
121	depends on CPU_SUBTYPE_SH7091
122	help
123	  Select Dreamcast if configuring for a SEGA Dreamcast.
124	  More information at <http://www.linux-sh.org>
125
126config SH_SH03
127	bool "Interface CTP/PCI-SH03"
128	depends on CPU_SUBTYPE_SH7751
129	select CPU_HAS_IPR_IRQ
130	select SYS_SUPPORTS_PCI
131	help
132	  CTP/PCI-SH03 is a CPU module computer that is produced
133	  by Interface Corporation.
134	  More information at <http://www.interface.co.jp>
135
136config SH_SECUREEDGE5410
137	bool "SecureEdge5410"
138	depends on CPU_SUBTYPE_SH7751R
139	select CPU_HAS_IPR_IRQ
140	select SYS_SUPPORTS_PCI
141	help
142	  Select SecureEdge5410 if configuring for a SnapGear SH board.
143	  This includes both the OEM SecureEdge products as well as the
144	  SME product line.
145
146config SH_RTS7751R2D
147	bool "RTS7751R2D"
148	depends on CPU_SUBTYPE_SH7751R
149	select SYS_SUPPORTS_PCI
150	select IO_TRAPPED if MMU
151	help
152	  Select RTS7751R2D if configuring for a Renesas Technology
153	  Sales SH-Graphics board.
154
155config SH_RSK
156	bool "Renesas Starter Kit"
157	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
158	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
159	select REGULATOR_FIXED_VOLTAGE if REGULATOR
160	help
161	 Select this option if configuring for any of the RSK+ MCU
162	 evaluation platforms.
163
164config SH_SDK7780
165	bool "SDK7780R3"
166	depends on CPU_SUBTYPE_SH7780
167	select SYS_SUPPORTS_PCI
168	help
169	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
170	  evaluation board.
171
172config SH_SDK7786
173	bool "SDK7786"
174	depends on CPU_SUBTYPE_SH7786
175	select SYS_SUPPORTS_PCI
176	select NO_IOPORT_MAP if !PCI
177	select ARCH_WANT_OPTIONAL_GPIOLIB
178	select HAVE_SRAM_POOL
179	select REGULATOR_FIXED_VOLTAGE if REGULATOR
180	help
181	  Select SDK7786 if configuring for a Renesas Technology Europe
182	  SH7786-65nm board.
183
184config SH_HIGHLANDER
185	bool "Highlander"
186	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
187	select SYS_SUPPORTS_PCI
188	select IO_TRAPPED if MMU
189
190config SH_SH7757LCR
191	bool "SH7757LCR"
192	depends on CPU_SUBTYPE_SH7757
193	select ARCH_REQUIRE_GPIOLIB
194	select REGULATOR_FIXED_VOLTAGE if REGULATOR
195
196config SH_SH7785LCR
197	bool "SH7785LCR"
198	depends on CPU_SUBTYPE_SH7785
199	select SYS_SUPPORTS_PCI
200
201config SH_SH7785LCR_29BIT_PHYSMAPS
202	bool "SH7785LCR 29bit physmaps"
203	depends on SH_SH7785LCR && 29BIT
204	default y
205	help
206	  This board has 2 physical memory maps. It can be changed with
207	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
208	  you can access all on-board device in 29bit address mode.
209
210config SH_SH7785LCR_PT
211	bool "SH7785LCR prototype board on 32-bit MMU mode"
212	depends on SH_SH7785LCR && 32BIT
213	default n
214	help
215	  If you use prototype board, this option is enabled.
216
217config SH_URQUELL
218	bool "Urquell"
219	depends on CPU_SUBTYPE_SH7786
220	select ARCH_REQUIRE_GPIOLIB
221	select SYS_SUPPORTS_PCI
222	select NO_IOPORT_MAP if !PCI
223
224config SH_MIGOR
225	bool "Migo-R"
226	depends on CPU_SUBTYPE_SH7722
227	select ARCH_REQUIRE_GPIOLIB
228	select REGULATOR_FIXED_VOLTAGE if REGULATOR
229	help
230	  Select Migo-R if configuring for the SH7722 Migo-R platform
231          by Renesas System Solutions Asia Pte. Ltd.
232
233config SH_AP325RXA
234	bool "AP-325RXA"
235	depends on CPU_SUBTYPE_SH7723
236	select ARCH_REQUIRE_GPIOLIB
237	select REGULATOR_FIXED_VOLTAGE if REGULATOR
238	help
239	  Renesas "AP-325RXA" support.
240	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
241
242config SH_KFR2R09
243	bool "KFR2R09"
244	depends on CPU_SUBTYPE_SH7724
245	select ARCH_REQUIRE_GPIOLIB
246	select REGULATOR_FIXED_VOLTAGE if REGULATOR
247	help
248	  "Kit For R2R for 2009" support.
249
250config SH_ECOVEC
251	bool "EcoVec"
252	depends on CPU_SUBTYPE_SH7724
253	select ARCH_REQUIRE_GPIOLIB
254	select SND_SOC_DA7210 if SND_SIMPLE_CARD
255	select REGULATOR_FIXED_VOLTAGE if REGULATOR
256	help
257	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
258
259config SH_SH7763RDP
260	bool "SH7763RDP"
261	depends on CPU_SUBTYPE_SH7763
262	help
263	  Select SH7763RDP if configuring for a Renesas SH7763
264	  evaluation board.
265
266config SH_ESPT
267	bool "ESPT"
268	depends on CPU_SUBTYPE_SH7763
269	help
270	  Select ESPT if configuring for a Renesas SH7763
271	  with gigabit ether evaluation board.
272
273config SH_EDOSK7705
274	bool "EDOSK7705"
275	depends on CPU_SUBTYPE_SH7705
276
277config SH_EDOSK7760
278	bool "EDOSK7760"
279	depends on CPU_SUBTYPE_SH7760
280	help
281	  Select if configuring for a Renesas EDOSK7760
282	  evaluation board.
283
284config SH_SH4202_MICRODEV
285	bool "SH4-202 MicroDev"
286	depends on CPU_SUBTYPE_SH4_202
287	help
288	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
289	  with an SH4-202 CPU.
290
291config SH_LANDISK
292	bool "LANDISK"
293	depends on CPU_SUBTYPE_SH7751R
294	select SYS_SUPPORTS_PCI
295	help
296	  I-O DATA DEVICE, INC. "LANDISK Series" support.
297
298config SH_TITAN
299	bool "TITAN"
300	depends on CPU_SUBTYPE_SH7751R
301	select CPU_HAS_IPR_IRQ
302	select SYS_SUPPORTS_PCI
303	help
304	  Select Titan if you are configuring for a Nimble Microsystems
305	  NetEngine NP51R.
306
307config SH_SHMIN
308	bool "SHMIN"
309	depends on CPU_SUBTYPE_SH7706
310	select CPU_HAS_IPR_IRQ
311	help
312	  Select SHMIN if configuring for the SHMIN board.
313
314config SH_LBOX_RE2
315	bool "L-BOX RE2"
316	depends on CPU_SUBTYPE_SH7751R
317	select SYS_SUPPORTS_PCI
318	help
319	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
320
321config SH_X3PROTO
322	bool "SH-X3 Prototype board"
323	depends on CPU_SUBTYPE_SHX3
324	select NO_IOPORT_MAP if !PCI
325	select IRQ_DOMAIN
326
327config SH_MAGIC_PANEL_R2
328	bool "Magic Panel R2"
329	depends on CPU_SUBTYPE_SH7720
330	select ARCH_REQUIRE_GPIOLIB
331	select REGULATOR_FIXED_VOLTAGE if REGULATOR
332	help
333	  Select Magic Panel R2 if configuring for Magic Panel R2.
334
335config SH_CAYMAN
336	bool "Hitachi Cayman"
337	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
338	select SYS_SUPPORTS_PCI
339	select ARCH_MIGHT_HAVE_PC_SERIO
340
341config SH_POLARIS
342	bool "SMSC Polaris"
343	select CPU_HAS_IPR_IRQ
344	select REGULATOR_FIXED_VOLTAGE if REGULATOR
345	depends on CPU_SUBTYPE_SH7709
346	help
347	  Select if configuring for an SMSC Polaris development board
348
349config SH_SH2007
350	bool "SH-2007 board"
351	select NO_IOPORT_MAP
352	select REGULATOR_FIXED_VOLTAGE if REGULATOR
353	depends on CPU_SUBTYPE_SH7780
354	help
355	  SH-2007 is a single-board computer based around SH7780 chip
356	  intended for embedded applications.
357	  It has an Ethernet interface (SMC9118), direct connected
358	  Compact Flash socket, two serial ports and PC-104 bus.
359	  More information at <http://sh2000.sh-linux.org>.
360
361config SH_APSH4A3A
362	bool "AP-SH4A-3A"
363	select SH_ALPHA_BOARD
364	select REGULATOR_FIXED_VOLTAGE if REGULATOR
365	depends on CPU_SUBTYPE_SH7785
366	help
367	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
368
369config SH_APSH4AD0A
370	bool "AP-SH4AD-0A"
371	select SH_ALPHA_BOARD
372	select SYS_SUPPORTS_PCI
373	select REGULATOR_FIXED_VOLTAGE if REGULATOR
374	depends on CPU_SUBTYPE_SH7786
375	help
376	  Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
377
378source "arch/sh/boards/mach-r2d/Kconfig"
379source "arch/sh/boards/mach-highlander/Kconfig"
380source "arch/sh/boards/mach-sdk7780/Kconfig"
381source "arch/sh/boards/mach-migor/Kconfig"
382source "arch/sh/boards/mach-rsk/Kconfig"
383
384if SH_MAGIC_PANEL_R2
385
386menu "Magic Panel R2 options"
387
388config SH_MAGIC_PANEL_R2_VERSION
389	int "Magic Panel R2 Version"
390	default "3"
391	help
392	  Set the version of the Magic Panel R2
393
394endmenu
395
396endif
397
398endmenu