Linux Audio

Check our new training course

Loading...
v3.15
 
  1menu "Board support"
  2
  3config SOLUTION_ENGINE
  4	bool
  5
  6config SH_ALPHA_BOARD
  7	bool
  8
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  9config SH_SOLUTION_ENGINE
 10	bool "SolutionEngine"
 11	select SOLUTION_ENGINE
 12	select CPU_HAS_IPR_IRQ
 13	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
 14	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
 15	  CPU_SUBTYPE_SH7750R 
 16	help
 17	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
 18	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
 19
 20config SH_7206_SOLUTION_ENGINE
 21	bool "SolutionEngine7206"
 22	select SOLUTION_ENGINE
 23	depends on CPU_SUBTYPE_SH7206
 24	help
 25	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
 26	  evaluation board.
 27
 28config SH_7619_SOLUTION_ENGINE
 29	bool "SolutionEngine7619"
 30	select SOLUTION_ENGINE
 31	depends on CPU_SUBTYPE_SH7619
 32	help
 33	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 34	  evaluation board.
 35	
 36config SH_7721_SOLUTION_ENGINE
 37	bool "SolutionEngine7721"
 38	select SOLUTION_ENGINE
 39	depends on CPU_SUBTYPE_SH7721
 40	help
 41	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
 42	  evaluation board.
 43
 44config SH_7722_SOLUTION_ENGINE
 45	bool "SolutionEngine7722"
 46	select SOLUTION_ENGINE
 47	select GENERIC_IRQ_CHIP
 48	select IRQ_DOMAIN
 49	depends on CPU_SUBTYPE_SH7722
 50	help
 51	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
 52	  evaluation board.
 53
 54config SH_7724_SOLUTION_ENGINE
 55	bool "SolutionEngine7724"
 56	select SOLUTION_ENGINE
 57	depends on CPU_SUBTYPE_SH7724
 58	select ARCH_REQUIRE_GPIOLIB
 59	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 60	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 61	help
 62	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
 63	  evaluation board.
 64
 65config SH_7751_SOLUTION_ENGINE
 66	bool "SolutionEngine7751"
 67	select SOLUTION_ENGINE
 68	select CPU_HAS_IPR_IRQ
 69	depends on CPU_SUBTYPE_SH7751
 70	help
 71	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
 72	  evaluation board.
 73	  
 74config SH_7780_SOLUTION_ENGINE
 75	bool "SolutionEngine7780"
 76	select SOLUTION_ENGINE
 77	select SYS_SUPPORTS_PCI
 78	depends on CPU_SUBTYPE_SH7780
 79	help
 80	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
 81	  evaluation board.
 82
 83config SH_7343_SOLUTION_ENGINE
 84	bool "SolutionEngine7343"
 85	select SOLUTION_ENGINE
 86	select GENERIC_IRQ_CHIP
 87	select IRQ_DOMAIN
 88	depends on CPU_SUBTYPE_SH7343
 89	help
 90	  Select 7343 SolutionEngine if configuring for a Hitachi
 91	  SH7343 (SH-Mobile 3AS) evaluation board.
 92
 93config SH_HP6XX
 94	bool "HP6XX"
 95	select SYS_SUPPORTS_APM_EMULATION
 96	select HD6446X_SERIES
 97	depends on CPU_SUBTYPE_SH7709
 98	help
 99	  Select HP6XX if configuring for a HP jornada HP6xx.
100	  More information (hardware only) at
101	  <http://www.hp.com/jornada/>.
102
103config SH_DREAMCAST
104	bool "Dreamcast"
105	select SYS_SUPPORTS_PCI
106	depends on CPU_SUBTYPE_SH7091
107	help
108	  Select Dreamcast if configuring for a SEGA Dreamcast.
109	  More information at <http://www.linux-sh.org>
110
111config SH_SH03
112	bool "Interface CTP/PCI-SH03"
113	depends on CPU_SUBTYPE_SH7751
114	select CPU_HAS_IPR_IRQ
115	select SYS_SUPPORTS_PCI
116	help
117	  CTP/PCI-SH03 is a CPU module computer that is produced
118	  by Interface Corporation.
119	  More information at <http://www.interface.co.jp>
120
121config SH_SECUREEDGE5410
122	bool "SecureEdge5410"
123	depends on CPU_SUBTYPE_SH7751R
124	select CPU_HAS_IPR_IRQ
125	select SYS_SUPPORTS_PCI
126	help
127	  Select SecureEdge5410 if configuring for a SnapGear SH board.
128	  This includes both the OEM SecureEdge products as well as the
129	  SME product line.
130
131config SH_RTS7751R2D
132	bool "RTS7751R2D"
133	depends on CPU_SUBTYPE_SH7751R
134	select SYS_SUPPORTS_PCI
135	select IO_TRAPPED if MMU
136	help
137	  Select RTS7751R2D if configuring for a Renesas Technology
138	  Sales SH-Graphics board.
139
140config SH_RSK
141	bool "Renesas Starter Kit"
142	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
143	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
144	select REGULATOR_FIXED_VOLTAGE if REGULATOR
145	help
146	 Select this option if configuring for any of the RSK+ MCU
147	 evaluation platforms.
148
149config SH_SDK7780
150	bool "SDK7780R3"
151	depends on CPU_SUBTYPE_SH7780
152	select SYS_SUPPORTS_PCI
153	help
154	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
155	  evaluation board.
156
157config SH_SDK7786
158	bool "SDK7786"
159	depends on CPU_SUBTYPE_SH7786
160	select SYS_SUPPORTS_PCI
161	select NO_IOPORT_MAP if !PCI
162	select ARCH_WANT_OPTIONAL_GPIOLIB
163	select HAVE_SRAM_POOL
164	select REGULATOR_FIXED_VOLTAGE if REGULATOR
165	help
166	  Select SDK7786 if configuring for a Renesas Technology Europe
167	  SH7786-65nm board.
168
169config SH_HIGHLANDER
170	bool "Highlander"
171	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
172	select SYS_SUPPORTS_PCI
173	select IO_TRAPPED if MMU
174
175config SH_SH7757LCR
176	bool "SH7757LCR"
177	depends on CPU_SUBTYPE_SH7757
178	select ARCH_REQUIRE_GPIOLIB
179	select REGULATOR_FIXED_VOLTAGE if REGULATOR
180
181config SH_SH7785LCR
182	bool "SH7785LCR"
183	depends on CPU_SUBTYPE_SH7785
184	select SYS_SUPPORTS_PCI
185
186config SH_SH7785LCR_29BIT_PHYSMAPS
187	bool "SH7785LCR 29bit physmaps"
188	depends on SH_SH7785LCR && 29BIT
189	default y
190	help
191	  This board has 2 physical memory maps. It can be changed with
192	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
193	  you can access all on-board device in 29bit address mode.
194
195config SH_SH7785LCR_PT
196	bool "SH7785LCR prototype board on 32-bit MMU mode"
197	depends on SH_SH7785LCR && 32BIT
198	default n
199	help
200	  If you use prototype board, this option is enabled.
201
202config SH_URQUELL
203	bool "Urquell"
204	depends on CPU_SUBTYPE_SH7786
205	select ARCH_REQUIRE_GPIOLIB
206	select SYS_SUPPORTS_PCI
207	select NO_IOPORT_MAP if !PCI
208
209config SH_MIGOR
210	bool "Migo-R"
211	depends on CPU_SUBTYPE_SH7722
212	select ARCH_REQUIRE_GPIOLIB
213	select REGULATOR_FIXED_VOLTAGE if REGULATOR
214	help
215	  Select Migo-R if configuring for the SH7722 Migo-R platform
216          by Renesas System Solutions Asia Pte. Ltd.
217
218config SH_AP325RXA
219	bool "AP-325RXA"
220	depends on CPU_SUBTYPE_SH7723
221	select ARCH_REQUIRE_GPIOLIB
222	select REGULATOR_FIXED_VOLTAGE if REGULATOR
223	help
224	  Renesas "AP-325RXA" support.
225	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
226
227config SH_KFR2R09
228	bool "KFR2R09"
229	depends on CPU_SUBTYPE_SH7724
230	select ARCH_REQUIRE_GPIOLIB
231	select REGULATOR_FIXED_VOLTAGE if REGULATOR
232	help
233	  "Kit For R2R for 2009" support.
234
235config SH_ECOVEC
236	bool "EcoVec"
237	depends on CPU_SUBTYPE_SH7724
238	select ARCH_REQUIRE_GPIOLIB
239	select SND_SOC_DA7210 if SND_SIMPLE_CARD
240	select REGULATOR_FIXED_VOLTAGE if REGULATOR
241	help
242	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
243
244config SH_SH7763RDP
245	bool "SH7763RDP"
246	depends on CPU_SUBTYPE_SH7763
247	help
248	  Select SH7763RDP if configuring for a Renesas SH7763
249	  evaluation board.
250
251config SH_ESPT
252	bool "ESPT"
253	depends on CPU_SUBTYPE_SH7763
254	help
255	  Select ESPT if configuring for a Renesas SH7763
256	  with gigabit ether evaluation board.
257
258config SH_EDOSK7705
259	bool "EDOSK7705"
260	depends on CPU_SUBTYPE_SH7705
261
262config SH_EDOSK7760
263	bool "EDOSK7760"
264	depends on CPU_SUBTYPE_SH7760
265	help
266	  Select if configuring for a Renesas EDOSK7760
267	  evaluation board.
268
269config SH_SH4202_MICRODEV
270	bool "SH4-202 MicroDev"
271	depends on CPU_SUBTYPE_SH4_202
272	help
273	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
274	  with an SH4-202 CPU.
275
276config SH_LANDISK
277	bool "LANDISK"
278	depends on CPU_SUBTYPE_SH7751R
279	select SYS_SUPPORTS_PCI
280	help
281	  I-O DATA DEVICE, INC. "LANDISK Series" support.
282
283config SH_TITAN
284	bool "TITAN"
285	depends on CPU_SUBTYPE_SH7751R
286	select CPU_HAS_IPR_IRQ
287	select SYS_SUPPORTS_PCI
288	help
289	  Select Titan if you are configuring for a Nimble Microsystems
290	  NetEngine NP51R.
291
292config SH_SHMIN
293	bool "SHMIN"
294	depends on CPU_SUBTYPE_SH7706
295	select CPU_HAS_IPR_IRQ
296	help
297	  Select SHMIN if configuring for the SHMIN board.
298
299config SH_LBOX_RE2
300	bool "L-BOX RE2"
301	depends on CPU_SUBTYPE_SH7751R
302	select SYS_SUPPORTS_PCI
303	help
304	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
305
306config SH_X3PROTO
307	bool "SH-X3 Prototype board"
308	depends on CPU_SUBTYPE_SHX3
309	select NO_IOPORT_MAP if !PCI
310	select IRQ_DOMAIN
311
312config SH_MAGIC_PANEL_R2
313	bool "Magic Panel R2"
314	depends on CPU_SUBTYPE_SH7720
315	select ARCH_REQUIRE_GPIOLIB
316	select REGULATOR_FIXED_VOLTAGE if REGULATOR
317	help
318	  Select Magic Panel R2 if configuring for Magic Panel R2.
319
320config SH_CAYMAN
321	bool "Hitachi Cayman"
322	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
323	select SYS_SUPPORTS_PCI
324	select ARCH_MIGHT_HAVE_PC_SERIO
325
326config SH_POLARIS
327	bool "SMSC Polaris"
328	select CPU_HAS_IPR_IRQ
329	select REGULATOR_FIXED_VOLTAGE if REGULATOR
330	depends on CPU_SUBTYPE_SH7709
331	help
332	  Select if configuring for an SMSC Polaris development board
333
334config SH_SH2007
335	bool "SH-2007 board"
336	select NO_IOPORT_MAP
337	select REGULATOR_FIXED_VOLTAGE if REGULATOR
338	depends on CPU_SUBTYPE_SH7780
339	help
340	  SH-2007 is a single-board computer based around SH7780 chip
341	  intended for embedded applications.
342	  It has an Ethernet interface (SMC9118), direct connected
343	  Compact Flash socket, two serial ports and PC-104 bus.
344	  More information at <http://sh2000.sh-linux.org>.
345
346config SH_APSH4A3A
347	bool "AP-SH4A-3A"
348	select SH_ALPHA_BOARD
349	select REGULATOR_FIXED_VOLTAGE if REGULATOR
350	depends on CPU_SUBTYPE_SH7785
351	help
352	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
353
354config SH_APSH4AD0A
355	bool "AP-SH4AD-0A"
356	select SH_ALPHA_BOARD
357	select SYS_SUPPORTS_PCI
358	select REGULATOR_FIXED_VOLTAGE if REGULATOR
359	depends on CPU_SUBTYPE_SH7786
360	help
361	  Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
362
363source "arch/sh/boards/mach-r2d/Kconfig"
364source "arch/sh/boards/mach-highlander/Kconfig"
365source "arch/sh/boards/mach-sdk7780/Kconfig"
366source "arch/sh/boards/mach-migor/Kconfig"
367source "arch/sh/boards/mach-rsk/Kconfig"
368
369if SH_MAGIC_PANEL_R2
370
371menu "Magic Panel R2 options"
372
373config SH_MAGIC_PANEL_R2_VERSION
374	int SH_MAGIC_PANEL_R2_VERSION
375	default "3"
376	help
377	  Set the version of the Magic Panel R2
378
379endmenu
380
381endif
382
383endmenu
v4.17
  1# SPDX-License-Identifier: GPL-2.0
  2menu "Board support"
  3
  4config SOLUTION_ENGINE
  5	bool
  6
  7config SH_ALPHA_BOARD
  8	bool
  9
 10config SH_DEVICE_TREE
 11	bool "Board Described by Device Tree"
 12	select OF
 13	select OF_EARLY_FLATTREE
 14	select TIMER_OF
 15	select COMMON_CLK
 16	select GENERIC_CALIBRATE_DELAY
 17	help
 18	  Select Board Described by Device Tree to build a kernel that
 19	  does not hard-code any board-specific knowledge but instead uses
 20	  a device tree blob provided by the boot-loader. You must enable
 21	  drivers for any hardware you want to use separately. At this
 22	  time, only boards based on the open-hardware J-Core processors
 23	  have sufficient driver coverage to use this option; do not
 24	  select it if you are using original SuperH hardware.
 25
 26config SH_JCORE_SOC
 27	bool "J-Core SoC"
 28	depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2)
 29	select CLKSRC_JCORE_PIT
 30	select JCORE_AIC
 31	default y if CPU_J2
 32	help
 33	  Select this option to include drivers core components of the
 34	  J-Core SoC, including interrupt controllers and timers.
 35
 36config SH_SOLUTION_ENGINE
 37	bool "SolutionEngine"
 38	select SOLUTION_ENGINE
 39	select CPU_HAS_IPR_IRQ
 40	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
 41	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
 42	  CPU_SUBTYPE_SH7750R 
 43	help
 44	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
 45	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
 46
 47config SH_7206_SOLUTION_ENGINE
 48	bool "SolutionEngine7206"
 49	select SOLUTION_ENGINE
 50	depends on CPU_SUBTYPE_SH7206
 51	help
 52	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
 53	  evaluation board.
 54
 55config SH_7619_SOLUTION_ENGINE
 56	bool "SolutionEngine7619"
 57	select SOLUTION_ENGINE
 58	depends on CPU_SUBTYPE_SH7619
 59	help
 60	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 61	  evaluation board.
 62	
 63config SH_7721_SOLUTION_ENGINE
 64	bool "SolutionEngine7721"
 65	select SOLUTION_ENGINE
 66	depends on CPU_SUBTYPE_SH7721
 67	help
 68	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
 69	  evaluation board.
 70
 71config SH_7722_SOLUTION_ENGINE
 72	bool "SolutionEngine7722"
 73	select SOLUTION_ENGINE
 74	select GENERIC_IRQ_CHIP
 75	select IRQ_DOMAIN
 76	depends on CPU_SUBTYPE_SH7722
 77	help
 78	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
 79	  evaluation board.
 80
 81config SH_7724_SOLUTION_ENGINE
 82	bool "SolutionEngine7724"
 83	select SOLUTION_ENGINE
 84	depends on CPU_SUBTYPE_SH7724
 85	select GPIOLIB
 86	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 87	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 88	help
 89	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
 90	  evaluation board.
 91
 92config SH_7751_SOLUTION_ENGINE
 93	bool "SolutionEngine7751"
 94	select SOLUTION_ENGINE
 95	select CPU_HAS_IPR_IRQ
 96	depends on CPU_SUBTYPE_SH7751
 97	help
 98	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
 99	  evaluation board.
100	  
101config SH_7780_SOLUTION_ENGINE
102	bool "SolutionEngine7780"
103	select SOLUTION_ENGINE
104	select SYS_SUPPORTS_PCI
105	depends on CPU_SUBTYPE_SH7780
106	help
107	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
108	  evaluation board.
109
110config SH_7343_SOLUTION_ENGINE
111	bool "SolutionEngine7343"
112	select SOLUTION_ENGINE
113	select GENERIC_IRQ_CHIP
114	select IRQ_DOMAIN
115	depends on CPU_SUBTYPE_SH7343
116	help
117	  Select 7343 SolutionEngine if configuring for a Hitachi
118	  SH7343 (SH-Mobile 3AS) evaluation board.
119
120config SH_HP6XX
121	bool "HP6XX"
122	select SYS_SUPPORTS_APM_EMULATION
123	select HD6446X_SERIES
124	depends on CPU_SUBTYPE_SH7709
125	help
126	  Select HP6XX if configuring for a HP jornada HP6xx.
127	  More information (hardware only) at
128	  <http://www.hp.com/jornada/>.
129
130config SH_DREAMCAST
131	bool "Dreamcast"
132	select SYS_SUPPORTS_PCI
133	depends on CPU_SUBTYPE_SH7091
134	help
135	  Select Dreamcast if configuring for a SEGA Dreamcast.
136	  More information at <http://www.linux-sh.org>
137
138config SH_SH03
139	bool "Interface CTP/PCI-SH03"
140	depends on CPU_SUBTYPE_SH7751
141	select CPU_HAS_IPR_IRQ
142	select SYS_SUPPORTS_PCI
143	help
144	  CTP/PCI-SH03 is a CPU module computer that is produced
145	  by Interface Corporation.
146	  More information at <http://www.interface.co.jp>
147
148config SH_SECUREEDGE5410
149	bool "SecureEdge5410"
150	depends on CPU_SUBTYPE_SH7751R
151	select CPU_HAS_IPR_IRQ
152	select SYS_SUPPORTS_PCI
153	help
154	  Select SecureEdge5410 if configuring for a SnapGear SH board.
155	  This includes both the OEM SecureEdge products as well as the
156	  SME product line.
157
158config SH_RTS7751R2D
159	bool "RTS7751R2D"
160	depends on CPU_SUBTYPE_SH7751R
161	select SYS_SUPPORTS_PCI
162	select IO_TRAPPED if MMU
163	help
164	  Select RTS7751R2D if configuring for a Renesas Technology
165	  Sales SH-Graphics board.
166
167config SH_RSK
168	bool "Renesas Starter Kit"
169	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
170	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
171	select REGULATOR_FIXED_VOLTAGE if REGULATOR
172	help
173	 Select this option if configuring for any of the RSK+ MCU
174	 evaluation platforms.
175
176config SH_SDK7780
177	bool "SDK7780R3"
178	depends on CPU_SUBTYPE_SH7780
179	select SYS_SUPPORTS_PCI
180	help
181	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
182	  evaluation board.
183
184config SH_SDK7786
185	bool "SDK7786"
186	depends on CPU_SUBTYPE_SH7786
187	select SYS_SUPPORTS_PCI
188	select NO_IOPORT_MAP if !PCI
 
189	select HAVE_SRAM_POOL
190	select REGULATOR_FIXED_VOLTAGE if REGULATOR
191	help
192	  Select SDK7786 if configuring for a Renesas Technology Europe
193	  SH7786-65nm board.
194
195config SH_HIGHLANDER
196	bool "Highlander"
197	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
198	select SYS_SUPPORTS_PCI
199	select IO_TRAPPED if MMU
200
201config SH_SH7757LCR
202	bool "SH7757LCR"
203	depends on CPU_SUBTYPE_SH7757
204	select GPIOLIB
205	select REGULATOR_FIXED_VOLTAGE if REGULATOR
206
207config SH_SH7785LCR
208	bool "SH7785LCR"
209	depends on CPU_SUBTYPE_SH7785
210	select SYS_SUPPORTS_PCI
211
212config SH_SH7785LCR_29BIT_PHYSMAPS
213	bool "SH7785LCR 29bit physmaps"
214	depends on SH_SH7785LCR && 29BIT
215	default y
216	help
217	  This board has 2 physical memory maps. It can be changed with
218	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
219	  you can access all on-board device in 29bit address mode.
220
221config SH_SH7785LCR_PT
222	bool "SH7785LCR prototype board on 32-bit MMU mode"
223	depends on SH_SH7785LCR && 32BIT
224	default n
225	help
226	  If you use prototype board, this option is enabled.
227
228config SH_URQUELL
229	bool "Urquell"
230	depends on CPU_SUBTYPE_SH7786
231	select GPIOLIB
232	select SYS_SUPPORTS_PCI
233	select NO_IOPORT_MAP if !PCI
234
235config SH_MIGOR
236	bool "Migo-R"
237	depends on CPU_SUBTYPE_SH7722
238	select GPIOLIB
239	select REGULATOR_FIXED_VOLTAGE if REGULATOR
240	help
241	  Select Migo-R if configuring for the SH7722 Migo-R platform
242          by Renesas System Solutions Asia Pte. Ltd.
243
244config SH_AP325RXA
245	bool "AP-325RXA"
246	depends on CPU_SUBTYPE_SH7723
247	select GPIOLIB
248	select REGULATOR_FIXED_VOLTAGE if REGULATOR
249	help
250	  Renesas "AP-325RXA" support.
251	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
252
253config SH_KFR2R09
254	bool "KFR2R09"
255	depends on CPU_SUBTYPE_SH7724
256	select GPIOLIB
257	select REGULATOR_FIXED_VOLTAGE if REGULATOR
258	help
259	  "Kit For R2R for 2009" support.
260
261config SH_ECOVEC
262	bool "EcoVec"
263	depends on CPU_SUBTYPE_SH7724
264	select GPIOLIB
265	select SND_SOC_DA7210 if SND_SIMPLE_CARD
266	select REGULATOR_FIXED_VOLTAGE if REGULATOR
267	help
268	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
269
270config SH_SH7763RDP
271	bool "SH7763RDP"
272	depends on CPU_SUBTYPE_SH7763
273	help
274	  Select SH7763RDP if configuring for a Renesas SH7763
275	  evaluation board.
276
277config SH_ESPT
278	bool "ESPT"
279	depends on CPU_SUBTYPE_SH7763
280	help
281	  Select ESPT if configuring for a Renesas SH7763
282	  with gigabit ether evaluation board.
283
284config SH_EDOSK7705
285	bool "EDOSK7705"
286	depends on CPU_SUBTYPE_SH7705
287
288config SH_EDOSK7760
289	bool "EDOSK7760"
290	depends on CPU_SUBTYPE_SH7760
291	help
292	  Select if configuring for a Renesas EDOSK7760
293	  evaluation board.
294
295config SH_SH4202_MICRODEV
296	bool "SH4-202 MicroDev"
297	depends on CPU_SUBTYPE_SH4_202
298	help
299	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
300	  with an SH4-202 CPU.
301
302config SH_LANDISK
303	bool "LANDISK"
304	depends on CPU_SUBTYPE_SH7751R
305	select SYS_SUPPORTS_PCI
306	help
307	  I-O DATA DEVICE, INC. "LANDISK Series" support.
308
309config SH_TITAN
310	bool "TITAN"
311	depends on CPU_SUBTYPE_SH7751R
312	select CPU_HAS_IPR_IRQ
313	select SYS_SUPPORTS_PCI
314	help
315	  Select Titan if you are configuring for a Nimble Microsystems
316	  NetEngine NP51R.
317
318config SH_SHMIN
319	bool "SHMIN"
320	depends on CPU_SUBTYPE_SH7706
321	select CPU_HAS_IPR_IRQ
322	help
323	  Select SHMIN if configuring for the SHMIN board.
324
325config SH_LBOX_RE2
326	bool "L-BOX RE2"
327	depends on CPU_SUBTYPE_SH7751R
328	select SYS_SUPPORTS_PCI
329	help
330	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
331
332config SH_X3PROTO
333	bool "SH-X3 Prototype board"
334	depends on CPU_SUBTYPE_SHX3
335	select NO_IOPORT_MAP if !PCI
336	select IRQ_DOMAIN
337
338config SH_MAGIC_PANEL_R2
339	bool "Magic Panel R2"
340	depends on CPU_SUBTYPE_SH7720
341	select GPIOLIB
342	select REGULATOR_FIXED_VOLTAGE if REGULATOR
343	help
344	  Select Magic Panel R2 if configuring for Magic Panel R2.
345
346config SH_CAYMAN
347	bool "Hitachi Cayman"
348	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
349	select SYS_SUPPORTS_PCI
350	select ARCH_MIGHT_HAVE_PC_SERIO
351
352config SH_POLARIS
353	bool "SMSC Polaris"
354	select CPU_HAS_IPR_IRQ
355	select REGULATOR_FIXED_VOLTAGE if REGULATOR
356	depends on CPU_SUBTYPE_SH7709
357	help
358	  Select if configuring for an SMSC Polaris development board
359
360config SH_SH2007
361	bool "SH-2007 board"
362	select NO_IOPORT_MAP
363	select REGULATOR_FIXED_VOLTAGE if REGULATOR
364	depends on CPU_SUBTYPE_SH7780
365	help
366	  SH-2007 is a single-board computer based around SH7780 chip
367	  intended for embedded applications.
368	  It has an Ethernet interface (SMC9118), direct connected
369	  Compact Flash socket, two serial ports and PC-104 bus.
370	  More information at <http://sh2000.sh-linux.org>.
371
372config SH_APSH4A3A
373	bool "AP-SH4A-3A"
374	select SH_ALPHA_BOARD
375	select REGULATOR_FIXED_VOLTAGE if REGULATOR
376	depends on CPU_SUBTYPE_SH7785
377	help
378	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
379
380config SH_APSH4AD0A
381	bool "AP-SH4AD-0A"
382	select SH_ALPHA_BOARD
383	select SYS_SUPPORTS_PCI
384	select REGULATOR_FIXED_VOLTAGE if REGULATOR
385	depends on CPU_SUBTYPE_SH7786
386	help
387	  Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
388
389source "arch/sh/boards/mach-r2d/Kconfig"
390source "arch/sh/boards/mach-highlander/Kconfig"
391source "arch/sh/boards/mach-sdk7780/Kconfig"
392source "arch/sh/boards/mach-migor/Kconfig"
393source "arch/sh/boards/mach-rsk/Kconfig"
394
395if SH_MAGIC_PANEL_R2
396
397menu "Magic Panel R2 options"
398
399config SH_MAGIC_PANEL_R2_VERSION
400	int "Magic Panel R2 Version"
401	default "3"
402	help
403	  Set the version of the Magic Panel R2
404
405endmenu
406
407endif
408
409endmenu