Loading...
1/**
2 * OMAP and TWL PMIC specific intializations.
3 *
4 * Copyright (C) 2010 Texas Instruments Incorporated.
5 * Thara Gopinath
6 * Copyright (C) 2009 Texas Instruments Incorporated.
7 * Nishanth Menon
8 * Copyright (C) 2009 Nokia Corporation
9 * Paul Walmsley
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16#include <linux/err.h>
17#include <linux/io.h>
18#include <linux/kernel.h>
19#include <linux/i2c/twl.h>
20
21#include "soc.h"
22#include "voltage.h"
23
24#include "pm.h"
25
26#define OMAP3_SRI2C_SLAVE_ADDR 0x12
27#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
28#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
29#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
30#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
31#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
32#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
33
34#define OMAP4_SRI2C_SLAVE_ADDR 0x12
35#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
36#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
37#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
38#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
39#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
40#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
41
42#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
43#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
44#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04
45#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200
46
47static bool is_offset_valid;
48static u8 smps_offset;
49/*
50 * Flag to ensure Smartreflex bit in TWL
51 * being cleared in board file is not overwritten.
52 */
53static bool __initdata twl_sr_enable_autoinit;
54
55#define TWL4030_DCDC_GLOBAL_CFG 0x06
56#define REG_SMPS_OFFSET 0xE0
57#define SMARTREFLEX_ENABLE BIT(3)
58
59static unsigned long twl4030_vsel_to_uv(const u8 vsel)
60{
61 return (((vsel * 125) + 6000)) * 100;
62}
63
64static u8 twl4030_uv_to_vsel(unsigned long uv)
65{
66 return DIV_ROUND_UP(uv - 600000, 12500);
67}
68
69static unsigned long twl6030_vsel_to_uv(const u8 vsel)
70{
71 /*
72 * In TWL6030 depending on the value of SMPS_OFFSET
73 * efuse register the voltage range supported in
74 * standard mode can be either between 0.6V - 1.3V or
75 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
76 * is programmed to all 0's where as starting from
77 * TWL6030 ES1.1 the efuse is programmed to 1
78 */
79 if (!is_offset_valid) {
80 twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
81 REG_SMPS_OFFSET);
82 is_offset_valid = true;
83 }
84
85 if (!vsel)
86 return 0;
87 /*
88 * There is no specific formula for voltage to vsel
89 * conversion above 1.3V. There are special hardcoded
90 * values for voltages above 1.3V. Currently we are
91 * hardcoding only for 1.35 V which is used for 1GH OPP for
92 * OMAP4430.
93 */
94 if (vsel == 0x3A)
95 return 1350000;
96
97 if (smps_offset & 0x8)
98 return ((((vsel - 1) * 1266) + 70900)) * 10;
99 else
100 return ((((vsel - 1) * 1266) + 60770)) * 10;
101}
102
103static u8 twl6030_uv_to_vsel(unsigned long uv)
104{
105 /*
106 * In TWL6030 depending on the value of SMPS_OFFSET
107 * efuse register the voltage range supported in
108 * standard mode can be either between 0.6V - 1.3V or
109 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
110 * is programmed to all 0's where as starting from
111 * TWL6030 ES1.1 the efuse is programmed to 1
112 */
113 if (!is_offset_valid) {
114 twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
115 REG_SMPS_OFFSET);
116 is_offset_valid = true;
117 }
118
119 if (!uv)
120 return 0x00;
121 /*
122 * There is no specific formula for voltage to vsel
123 * conversion above 1.3V. There are special hardcoded
124 * values for voltages above 1.3V. Currently we are
125 * hardcoding only for 1.35 V which is used for 1GH OPP for
126 * OMAP4430.
127 */
128 if (uv > twl6030_vsel_to_uv(0x39)) {
129 if (uv == 1350000)
130 return 0x3A;
131 pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
132 __func__, uv, twl6030_vsel_to_uv(0x39));
133 return 0x3A;
134 }
135
136 if (smps_offset & 0x8)
137 return DIV_ROUND_UP(uv - 709000, 12660) + 1;
138 else
139 return DIV_ROUND_UP(uv - 607700, 12660) + 1;
140}
141
142static struct omap_voltdm_pmic omap3_mpu_pmic = {
143 .slew_rate = 4000,
144 .step_size = 12500,
145 .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
146 .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
147 .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
148 .vddmin = 600000,
149 .vddmax = 1450000,
150 .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
151 .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
152 .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
153 .i2c_high_speed = true,
154 .vsel_to_uv = twl4030_vsel_to_uv,
155 .uv_to_vsel = twl4030_uv_to_vsel,
156};
157
158static struct omap_voltdm_pmic omap3_core_pmic = {
159 .slew_rate = 4000,
160 .step_size = 12500,
161 .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
162 .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
163 .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
164 .vddmin = 600000,
165 .vddmax = 1450000,
166 .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
167 .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
168 .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
169 .i2c_high_speed = true,
170 .vsel_to_uv = twl4030_vsel_to_uv,
171 .uv_to_vsel = twl4030_uv_to_vsel,
172};
173
174static struct omap_voltdm_pmic omap4_mpu_pmic = {
175 .slew_rate = 4000,
176 .step_size = 12660,
177 .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
178 .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
179 .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
180 .vddmin = 0,
181 .vddmax = 2100000,
182 .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
183 .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
184 .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
185 .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
186 .i2c_high_speed = true,
187 .i2c_pad_load = 3,
188 .vsel_to_uv = twl6030_vsel_to_uv,
189 .uv_to_vsel = twl6030_uv_to_vsel,
190};
191
192static struct omap_voltdm_pmic omap4_iva_pmic = {
193 .slew_rate = 4000,
194 .step_size = 12660,
195 .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
196 .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
197 .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
198 .vddmin = 0,
199 .vddmax = 2100000,
200 .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
201 .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
202 .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
203 .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
204 .i2c_high_speed = true,
205 .i2c_pad_load = 3,
206 .vsel_to_uv = twl6030_vsel_to_uv,
207 .uv_to_vsel = twl6030_uv_to_vsel,
208};
209
210static struct omap_voltdm_pmic omap4_core_pmic = {
211 .slew_rate = 4000,
212 .step_size = 12660,
213 .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
214 .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
215 .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
216 .vddmin = 0,
217 .vddmax = 2100000,
218 .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
219 .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
220 .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
221 .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
222 .i2c_high_speed = true,
223 .i2c_pad_load = 3,
224 .vsel_to_uv = twl6030_vsel_to_uv,
225 .uv_to_vsel = twl6030_uv_to_vsel,
226};
227
228int __init omap4_twl_init(void)
229{
230 struct voltagedomain *voltdm;
231
232 if (!cpu_is_omap44xx())
233 return -ENODEV;
234
235 voltdm = voltdm_lookup("mpu");
236 omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
237
238 voltdm = voltdm_lookup("iva");
239 omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
240
241 voltdm = voltdm_lookup("core");
242 omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
243
244 return 0;
245}
246
247int __init omap3_twl_init(void)
248{
249 struct voltagedomain *voltdm;
250
251 if (!cpu_is_omap34xx())
252 return -ENODEV;
253
254 /*
255 * The smartreflex bit on twl4030 specifies if the setting of voltage
256 * is done over the I2C_SR path. Since this setting is independent of
257 * the actual usage of smartreflex AVS module, we enable TWL SR bit
258 * by default irrespective of whether smartreflex AVS module is enabled
259 * on the OMAP side or not. This is because without this bit enabled,
260 * the voltage scaling through vp forceupdate/bypass mechanism of
261 * voltage scaling will not function on TWL over I2C_SR.
262 */
263 if (!twl_sr_enable_autoinit)
264 omap3_twl_set_sr_bit(true);
265
266 voltdm = voltdm_lookup("mpu_iva");
267 omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
268
269 voltdm = voltdm_lookup("core");
270 omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
271
272 return 0;
273}
274
275/**
276 * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL
277 * @enable: enable SR mode in twl or not
278 *
279 * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure
280 * voltage scaling through OMAP SR works. Else, the smartreflex bit
281 * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but
282 * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct
283 * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
284 * in those scenarios this bit is to be cleared (enable = false).
285 *
286 * Returns 0 on success, error is returned if I2C read/write fails.
287 */
288int __init omap3_twl_set_sr_bit(bool enable)
289{
290 u8 temp;
291 int ret;
292 if (twl_sr_enable_autoinit)
293 pr_warning("%s: unexpected multiple calls\n", __func__);
294
295 ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
296 TWL4030_DCDC_GLOBAL_CFG);
297 if (ret)
298 goto err;
299
300 if (enable)
301 temp |= SMARTREFLEX_ENABLE;
302 else
303 temp &= ~SMARTREFLEX_ENABLE;
304
305 ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
306 TWL4030_DCDC_GLOBAL_CFG);
307 if (!ret) {
308 twl_sr_enable_autoinit = true;
309 return 0;
310 }
311err:
312 pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret);
313 return ret;
314}
1/**
2 * OMAP and TWL PMIC specific initializations.
3 *
4 * Copyright (C) 2010 Texas Instruments Incorporated.
5 * Thara Gopinath
6 * Copyright (C) 2009 Texas Instruments Incorporated.
7 * Nishanth Menon
8 * Copyright (C) 2009 Nokia Corporation
9 * Paul Walmsley
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16#include <linux/err.h>
17#include <linux/io.h>
18#include <linux/kernel.h>
19#include <linux/mfd/twl.h>
20
21#include "soc.h"
22#include "voltage.h"
23
24#include "pm.h"
25
26#define OMAP3_SRI2C_SLAVE_ADDR 0x12
27#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
28#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
29#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
30#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
31#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
32#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
33
34#define OMAP4_SRI2C_SLAVE_ADDR 0x12
35#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
36#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
37#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
38#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
39#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
40#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
41
42#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
43#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
44#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04
45#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200
46
47static bool is_offset_valid;
48static u8 smps_offset;
49
50#define REG_SMPS_OFFSET 0xE0
51
52static unsigned long twl4030_vsel_to_uv(const u8 vsel)
53{
54 return (((vsel * 125) + 6000)) * 100;
55}
56
57static u8 twl4030_uv_to_vsel(unsigned long uv)
58{
59 return DIV_ROUND_UP(uv - 600000, 12500);
60}
61
62static unsigned long twl6030_vsel_to_uv(const u8 vsel)
63{
64 /*
65 * In TWL6030 depending on the value of SMPS_OFFSET
66 * efuse register the voltage range supported in
67 * standard mode can be either between 0.6V - 1.3V or
68 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
69 * is programmed to all 0's where as starting from
70 * TWL6030 ES1.1 the efuse is programmed to 1
71 */
72 if (!is_offset_valid) {
73 twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
74 REG_SMPS_OFFSET);
75 is_offset_valid = true;
76 }
77
78 if (!vsel)
79 return 0;
80 /*
81 * There is no specific formula for voltage to vsel
82 * conversion above 1.3V. There are special hardcoded
83 * values for voltages above 1.3V. Currently we are
84 * hardcoding only for 1.35 V which is used for 1GH OPP for
85 * OMAP4430.
86 */
87 if (vsel == 0x3A)
88 return 1350000;
89
90 if (smps_offset & 0x8)
91 return ((((vsel - 1) * 1266) + 70900)) * 10;
92 else
93 return ((((vsel - 1) * 1266) + 60770)) * 10;
94}
95
96static u8 twl6030_uv_to_vsel(unsigned long uv)
97{
98 /*
99 * In TWL6030 depending on the value of SMPS_OFFSET
100 * efuse register the voltage range supported in
101 * standard mode can be either between 0.6V - 1.3V or
102 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
103 * is programmed to all 0's where as starting from
104 * TWL6030 ES1.1 the efuse is programmed to 1
105 */
106 if (!is_offset_valid) {
107 twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
108 REG_SMPS_OFFSET);
109 is_offset_valid = true;
110 }
111
112 if (!uv)
113 return 0x00;
114 /*
115 * There is no specific formula for voltage to vsel
116 * conversion above 1.3V. There are special hardcoded
117 * values for voltages above 1.3V. Currently we are
118 * hardcoding only for 1.35 V which is used for 1GH OPP for
119 * OMAP4430.
120 */
121 if (uv > twl6030_vsel_to_uv(0x39)) {
122 if (uv == 1350000)
123 return 0x3A;
124 pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
125 __func__, uv, twl6030_vsel_to_uv(0x39));
126 return 0x3A;
127 }
128
129 if (smps_offset & 0x8)
130 return DIV_ROUND_UP(uv - 709000, 12660) + 1;
131 else
132 return DIV_ROUND_UP(uv - 607700, 12660) + 1;
133}
134
135static struct omap_voltdm_pmic omap3_mpu_pmic = {
136 .slew_rate = 4000,
137 .step_size = 12500,
138 .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
139 .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
140 .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
141 .vddmin = 600000,
142 .vddmax = 1450000,
143 .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
144 .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
145 .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
146 .i2c_high_speed = true,
147 .vsel_to_uv = twl4030_vsel_to_uv,
148 .uv_to_vsel = twl4030_uv_to_vsel,
149};
150
151static struct omap_voltdm_pmic omap3_core_pmic = {
152 .slew_rate = 4000,
153 .step_size = 12500,
154 .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
155 .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
156 .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
157 .vddmin = 600000,
158 .vddmax = 1450000,
159 .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
160 .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
161 .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
162 .i2c_high_speed = true,
163 .vsel_to_uv = twl4030_vsel_to_uv,
164 .uv_to_vsel = twl4030_uv_to_vsel,
165};
166
167static struct omap_voltdm_pmic omap4_mpu_pmic = {
168 .slew_rate = 4000,
169 .step_size = 12660,
170 .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
171 .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
172 .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
173 .vddmin = 0,
174 .vddmax = 2100000,
175 .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
176 .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
177 .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
178 .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
179 .i2c_high_speed = true,
180 .i2c_pad_load = 3,
181 .vsel_to_uv = twl6030_vsel_to_uv,
182 .uv_to_vsel = twl6030_uv_to_vsel,
183};
184
185static struct omap_voltdm_pmic omap4_iva_pmic = {
186 .slew_rate = 4000,
187 .step_size = 12660,
188 .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
189 .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
190 .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
191 .vddmin = 0,
192 .vddmax = 2100000,
193 .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
194 .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
195 .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
196 .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
197 .i2c_high_speed = true,
198 .i2c_pad_load = 3,
199 .vsel_to_uv = twl6030_vsel_to_uv,
200 .uv_to_vsel = twl6030_uv_to_vsel,
201};
202
203static struct omap_voltdm_pmic omap4_core_pmic = {
204 .slew_rate = 4000,
205 .step_size = 12660,
206 .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
207 .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
208 .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
209 .vddmin = 0,
210 .vddmax = 2100000,
211 .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
212 .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
213 .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
214 .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
215 .i2c_high_speed = true,
216 .i2c_pad_load = 3,
217 .vsel_to_uv = twl6030_vsel_to_uv,
218 .uv_to_vsel = twl6030_uv_to_vsel,
219};
220
221int __init omap4_twl_init(void)
222{
223 struct voltagedomain *voltdm;
224
225 if (!cpu_is_omap44xx())
226 return -ENODEV;
227
228 voltdm = voltdm_lookup("mpu");
229 omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
230
231 voltdm = voltdm_lookup("iva");
232 omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
233
234 voltdm = voltdm_lookup("core");
235 omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
236
237 return 0;
238}
239
240int __init omap3_twl_init(void)
241{
242 struct voltagedomain *voltdm;
243
244 if (!cpu_is_omap34xx())
245 return -ENODEV;
246
247 voltdm = voltdm_lookup("mpu_iva");
248 omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
249
250 voltdm = voltdm_lookup("core");
251 omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
252
253 return 0;
254}