Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
4 * JZ4740 platform PWM support
5 *
6 * Limitations:
7 * - The .apply callback doesn't complete the currently running period before
8 * reconfiguring the hardware.
9 */
10
11#include <linux/clk.h>
12#include <linux/err.h>
13#include <linux/gpio.h>
14#include <linux/kernel.h>
15#include <linux/mfd/ingenic-tcu.h>
16#include <linux/mfd/syscon.h>
17#include <linux/module.h>
18#include <linux/of.h>
19#include <linux/platform_device.h>
20#include <linux/pwm.h>
21#include <linux/regmap.h>
22
23struct soc_info {
24 unsigned int num_pwms;
25};
26
27struct jz4740_pwm_chip {
28 struct regmap *map;
29 struct clk *clk[];
30};
31
32static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
33{
34 return pwmchip_get_drvdata(chip);
35}
36
37static bool jz4740_pwm_can_use_chn(struct pwm_chip *chip, unsigned int channel)
38{
39 /* Enable all TCU channels for PWM use by default except channels 0/1 */
40 u32 pwm_channels_mask = GENMASK(chip->npwm - 1, 2);
41
42 device_property_read_u32(pwmchip_parent(chip)->parent,
43 "ingenic,pwm-channels-mask",
44 &pwm_channels_mask);
45
46 return !!(pwm_channels_mask & BIT(channel));
47}
48
49static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
50{
51 struct jz4740_pwm_chip *jz = to_jz4740(chip);
52 struct clk *clk;
53 char name[16];
54 int err;
55
56 if (!jz4740_pwm_can_use_chn(chip, pwm->hwpwm))
57 return -EBUSY;
58
59 snprintf(name, sizeof(name), "timer%u", pwm->hwpwm);
60
61 clk = clk_get(pwmchip_parent(chip), name);
62 if (IS_ERR(clk)) {
63 dev_err(pwmchip_parent(chip),
64 "error %pe: Failed to get clock\n", clk);
65 return PTR_ERR(clk);
66 }
67
68 err = clk_prepare_enable(clk);
69 if (err < 0) {
70 clk_put(clk);
71 return err;
72 }
73
74 jz->clk[pwm->hwpwm] = clk;
75
76 return 0;
77}
78
79static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
80{
81 struct jz4740_pwm_chip *jz = to_jz4740(chip);
82 struct clk *clk = jz->clk[pwm->hwpwm];
83
84 clk_disable_unprepare(clk);
85 clk_put(clk);
86}
87
88static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
89{
90 struct jz4740_pwm_chip *jz = to_jz4740(chip);
91
92 /* Enable PWM output */
93 regmap_set_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm), TCU_TCSR_PWM_EN);
94
95 /* Start counter */
96 regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
97
98 return 0;
99}
100
101static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
102{
103 struct jz4740_pwm_chip *jz = to_jz4740(chip);
104
105 /*
106 * Set duty > period. This trick allows the TCU channels in TCU2 mode to
107 * properly return to their init level.
108 */
109 regmap_write(jz->map, TCU_REG_TDHRc(pwm->hwpwm), 0xffff);
110 regmap_write(jz->map, TCU_REG_TDFRc(pwm->hwpwm), 0x0);
111
112 /*
113 * Disable PWM output.
114 * In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
115 * counter is stopped, while in TCU1 mode the order does not matter.
116 */
117 regmap_clear_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm), TCU_TCSR_PWM_EN);
118
119 /* Stop counter */
120 regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
121}
122
123static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
124 const struct pwm_state *state)
125{
126 struct jz4740_pwm_chip *jz = to_jz4740(chip);
127 unsigned long long tmp = 0xffffull * NSEC_PER_SEC;
128 struct clk *clk = jz->clk[pwm->hwpwm];
129 unsigned long period, duty;
130 long rate;
131 int err;
132
133 /*
134 * Limit the clock to a maximum rate that still gives us a period value
135 * which fits in 16 bits.
136 */
137 do_div(tmp, state->period);
138
139 /*
140 * /!\ IMPORTANT NOTE:
141 * -------------------
142 * This code relies on the fact that clk_round_rate() will always round
143 * down, which is not a valid assumption given by the clk API, but only
144 * happens to be true with the clk drivers used for Ingenic SoCs.
145 *
146 * Right now, there is no alternative as the clk API does not have a
147 * round-down function (and won't have one for a while), but if it ever
148 * comes to light, a round-down function should be used instead.
149 */
150 rate = clk_round_rate(clk, tmp);
151 if (rate < 0) {
152 dev_err(pwmchip_parent(chip), "Unable to round rate: %ld\n", rate);
153 return rate;
154 }
155
156 /* Calculate period value */
157 tmp = (unsigned long long)rate * state->period;
158 do_div(tmp, NSEC_PER_SEC);
159 period = tmp;
160
161 /* Calculate duty value */
162 tmp = (unsigned long long)rate * state->duty_cycle;
163 do_div(tmp, NSEC_PER_SEC);
164 duty = tmp;
165
166 if (duty >= period)
167 duty = period - 1;
168
169 jz4740_pwm_disable(chip, pwm);
170
171 err = clk_set_rate(clk, rate);
172 if (err) {
173 dev_err(pwmchip_parent(chip), "Unable to set rate: %d\n", err);
174 return err;
175 }
176
177 /* Reset counter to 0 */
178 regmap_write(jz->map, TCU_REG_TCNTc(pwm->hwpwm), 0);
179
180 /* Set duty */
181 regmap_write(jz->map, TCU_REG_TDHRc(pwm->hwpwm), duty);
182
183 /* Set period */
184 regmap_write(jz->map, TCU_REG_TDFRc(pwm->hwpwm), period);
185
186 /* Set abrupt shutdown */
187 regmap_set_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
188 TCU_TCSR_PWM_SD);
189
190 /*
191 * Set polarity.
192 *
193 * The PWM starts in inactive state until the internal timer reaches the
194 * duty value, then becomes active until the timer reaches the period
195 * value. In theory, we should then use (period - duty) as the real duty
196 * value, as a high duty value would otherwise result in the PWM pin
197 * being inactive most of the time.
198 *
199 * Here, we don't do that, and instead invert the polarity of the PWM
200 * when it is active. This trick makes the PWM start with its active
201 * state instead of its inactive state.
202 */
203 if ((state->polarity == PWM_POLARITY_NORMAL) ^ state->enabled)
204 regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
205 TCU_TCSR_PWM_INITL_HIGH, 0);
206 else
207 regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
208 TCU_TCSR_PWM_INITL_HIGH,
209 TCU_TCSR_PWM_INITL_HIGH);
210
211 if (state->enabled)
212 jz4740_pwm_enable(chip, pwm);
213
214 return 0;
215}
216
217static const struct pwm_ops jz4740_pwm_ops = {
218 .request = jz4740_pwm_request,
219 .free = jz4740_pwm_free,
220 .apply = jz4740_pwm_apply,
221};
222
223static int jz4740_pwm_probe(struct platform_device *pdev)
224{
225 struct device *dev = &pdev->dev;
226 struct pwm_chip *chip;
227 struct jz4740_pwm_chip *jz;
228 const struct soc_info *info;
229
230 info = device_get_match_data(dev);
231 if (!info)
232 return -EINVAL;
233
234 chip = devm_pwmchip_alloc(dev, info->num_pwms, struct_size(jz, clk, info->num_pwms));
235 if (IS_ERR(chip))
236 return PTR_ERR(chip);
237 jz = to_jz4740(chip);
238
239 jz->map = device_node_to_regmap(dev->parent->of_node);
240 if (IS_ERR(jz->map)) {
241 dev_err(dev, "regmap not found: %ld\n", PTR_ERR(jz->map));
242 return PTR_ERR(jz->map);
243 }
244
245 chip->ops = &jz4740_pwm_ops;
246
247 return devm_pwmchip_add(dev, chip);
248}
249
250static const struct soc_info jz4740_soc_info = {
251 .num_pwms = 8,
252};
253
254static const struct soc_info jz4725b_soc_info = {
255 .num_pwms = 6,
256};
257
258static const struct soc_info x1000_soc_info = {
259 .num_pwms = 5,
260};
261
262static const struct of_device_id jz4740_pwm_dt_ids[] = {
263 { .compatible = "ingenic,jz4740-pwm", .data = &jz4740_soc_info },
264 { .compatible = "ingenic,jz4725b-pwm", .data = &jz4725b_soc_info },
265 { .compatible = "ingenic,x1000-pwm", .data = &x1000_soc_info },
266 {},
267};
268MODULE_DEVICE_TABLE(of, jz4740_pwm_dt_ids);
269
270static struct platform_driver jz4740_pwm_driver = {
271 .driver = {
272 .name = "jz4740-pwm",
273 .of_match_table = jz4740_pwm_dt_ids,
274 },
275 .probe = jz4740_pwm_probe,
276};
277module_platform_driver(jz4740_pwm_driver);
278
279MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
280MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver");
281MODULE_ALIAS("platform:jz4740-pwm");
282MODULE_LICENSE("GPL");