Loading...
1/*
2 * Copyright 2005-2009 MontaVista Software, Inc.
3 * Copyright 2008 Freescale Semiconductor, Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software Foundation,
17 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 *
19 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
20 * by Hunter Wu.
21 * Power Management support by Dave Liu <daveliu@freescale.com>,
22 * Jerry Huang <Chang-Ming.Huang@freescale.com> and
23 * Anton Vorontsov <avorontsov@ru.mvista.com>.
24 */
25
26#include <linux/kernel.h>
27#include <linux/types.h>
28#include <linux/delay.h>
29#include <linux/pm.h>
30#include <linux/platform_device.h>
31#include <linux/fsl_devices.h>
32
33#include "ehci-fsl.h"
34
35/* configure so an HC device and id are always provided */
36/* always called with process context; sleeping is OK */
37
38/**
39 * usb_hcd_fsl_probe - initialize FSL-based HCDs
40 * @drvier: Driver to be used for this HCD
41 * @pdev: USB Host Controller being probed
42 * Context: !in_interrupt()
43 *
44 * Allocates basic resources for this USB host controller.
45 *
46 */
47static int usb_hcd_fsl_probe(const struct hc_driver *driver,
48 struct platform_device *pdev)
49{
50 struct fsl_usb2_platform_data *pdata;
51 struct usb_hcd *hcd;
52 struct resource *res;
53 int irq;
54 int retval;
55
56 pr_debug("initializing FSL-SOC USB Controller\n");
57
58 /* Need platform data for setup */
59 pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
60 if (!pdata) {
61 dev_err(&pdev->dev,
62 "No platform data for %s.\n", dev_name(&pdev->dev));
63 return -ENODEV;
64 }
65
66 /*
67 * This is a host mode driver, verify that we're supposed to be
68 * in host mode.
69 */
70 if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
71 (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
72 (pdata->operating_mode == FSL_USB2_DR_OTG))) {
73 dev_err(&pdev->dev,
74 "Non Host Mode configured for %s. Wrong driver linked.\n",
75 dev_name(&pdev->dev));
76 return -ENODEV;
77 }
78
79 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
80 if (!res) {
81 dev_err(&pdev->dev,
82 "Found HC with no IRQ. Check %s setup!\n",
83 dev_name(&pdev->dev));
84 return -ENODEV;
85 }
86 irq = res->start;
87
88 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
89 if (!hcd) {
90 retval = -ENOMEM;
91 goto err1;
92 }
93
94 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
95 if (!res) {
96 dev_err(&pdev->dev,
97 "Found HC with no register addr. Check %s setup!\n",
98 dev_name(&pdev->dev));
99 retval = -ENODEV;
100 goto err2;
101 }
102 hcd->rsrc_start = res->start;
103 hcd->rsrc_len = resource_size(res);
104 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
105 driver->description)) {
106 dev_dbg(&pdev->dev, "controller already in use\n");
107 retval = -EBUSY;
108 goto err2;
109 }
110 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
111
112 if (hcd->regs == NULL) {
113 dev_dbg(&pdev->dev, "error mapping memory\n");
114 retval = -EFAULT;
115 goto err3;
116 }
117
118 pdata->regs = hcd->regs;
119
120 if (pdata->power_budget)
121 hcd->power_budget = pdata->power_budget;
122
123 /*
124 * do platform specific init: check the clock, grab/config pins, etc.
125 */
126 if (pdata->init && pdata->init(pdev)) {
127 retval = -ENODEV;
128 goto err3;
129 }
130
131 /* Enable USB controller, 83xx or 8536 */
132 if (pdata->have_sysif_regs)
133 setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
134
135 /* Don't need to set host mode here. It will be done by tdi_reset() */
136
137 retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
138 if (retval != 0)
139 goto err4;
140
141#ifdef CONFIG_USB_OTG
142 if (pdata->operating_mode == FSL_USB2_DR_OTG) {
143 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
144
145 ehci->transceiver = otg_get_transceiver();
146 dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, transceiver=0x%p\n",
147 hcd, ehci, ehci->transceiver);
148
149 if (ehci->transceiver) {
150 retval = otg_set_host(ehci->transceiver,
151 &ehci_to_hcd(ehci)->self);
152 if (retval) {
153 if (ehci->transceiver)
154 put_device(ehci->transceiver->dev);
155 goto err4;
156 }
157 } else {
158 dev_err(&pdev->dev, "can't find transceiver\n");
159 retval = -ENODEV;
160 goto err4;
161 }
162 }
163#endif
164 return retval;
165
166 err4:
167 iounmap(hcd->regs);
168 err3:
169 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
170 err2:
171 usb_put_hcd(hcd);
172 err1:
173 dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
174 if (pdata->exit)
175 pdata->exit(pdev);
176 return retval;
177}
178
179/* may be called without controller electrically present */
180/* may be called with controller, bus, and devices active */
181
182/**
183 * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
184 * @dev: USB Host Controller being removed
185 * Context: !in_interrupt()
186 *
187 * Reverses the effect of usb_hcd_fsl_probe().
188 *
189 */
190static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
191 struct platform_device *pdev)
192{
193 struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
194 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
195
196 if (ehci->transceiver) {
197 otg_set_host(ehci->transceiver, NULL);
198 put_device(ehci->transceiver->dev);
199 }
200
201 usb_remove_hcd(hcd);
202
203 /*
204 * do platform specific un-initialization:
205 * release iomux pins, disable clock, etc.
206 */
207 if (pdata->exit)
208 pdata->exit(pdev);
209 iounmap(hcd->regs);
210 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
211 usb_put_hcd(hcd);
212}
213
214static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
215 enum fsl_usb2_phy_modes phy_mode,
216 unsigned int port_offset)
217{
218 u32 portsc;
219
220 portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
221 portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
222
223 switch (phy_mode) {
224 case FSL_USB2_PHY_ULPI:
225 portsc |= PORT_PTS_ULPI;
226 break;
227 case FSL_USB2_PHY_SERIAL:
228 portsc |= PORT_PTS_SERIAL;
229 break;
230 case FSL_USB2_PHY_UTMI_WIDE:
231 portsc |= PORT_PTS_PTW;
232 /* fall through */
233 case FSL_USB2_PHY_UTMI:
234 portsc |= PORT_PTS_UTMI;
235 break;
236 case FSL_USB2_PHY_NONE:
237 break;
238 }
239 ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
240}
241
242static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
243{
244 struct usb_hcd *hcd = ehci_to_hcd(ehci);
245 struct fsl_usb2_platform_data *pdata;
246 void __iomem *non_ehci = hcd->regs;
247 u32 temp;
248
249 pdata = hcd->self.controller->platform_data;
250
251 /* Enable PHY interface in the control reg. */
252 if (pdata->have_sysif_regs) {
253 temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
254 out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
255 out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
256 }
257
258#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
259 /*
260 * Turn on cache snooping hardware, since some PowerPC platforms
261 * wholly rely on hardware to deal with cache coherent
262 */
263
264 /* Setup Snooping for all the 4GB space */
265 /* SNOOP1 starts from 0x0, size 2G */
266 out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
267 /* SNOOP2 starts from 0x80000000, size 2G */
268 out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
269#endif
270
271 if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
272 (pdata->operating_mode == FSL_USB2_DR_OTG))
273 ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
274
275 if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
276 unsigned int chip, rev, svr;
277
278 svr = mfspr(SPRN_SVR);
279 chip = svr >> 16;
280 rev = (svr >> 4) & 0xf;
281
282 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
283 if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
284 ehci->has_fsl_port_bug = 1;
285
286 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
287 ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
288 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
289 ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1);
290 }
291
292 if (pdata->have_sysif_regs) {
293#ifdef CONFIG_PPC_85xx
294 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
295 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
296#else
297 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
298 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
299#endif
300 out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
301 }
302}
303
304/* called after powerup, by probe or system-pm "wakeup" */
305static int ehci_fsl_reinit(struct ehci_hcd *ehci)
306{
307 ehci_fsl_usb_setup(ehci);
308 ehci_port_power(ehci, 0);
309
310 return 0;
311}
312
313/* called during probe() after chip reset completes */
314static int ehci_fsl_setup(struct usb_hcd *hcd)
315{
316 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
317 int retval;
318 struct fsl_usb2_platform_data *pdata;
319
320 pdata = hcd->self.controller->platform_data;
321 ehci->big_endian_desc = pdata->big_endian_desc;
322 ehci->big_endian_mmio = pdata->big_endian_mmio;
323
324 /* EHCI registers start at offset 0x100 */
325 ehci->caps = hcd->regs + 0x100;
326 ehci->regs = hcd->regs + 0x100 +
327 HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
328 dbg_hcs_params(ehci, "reset");
329 dbg_hcc_params(ehci, "reset");
330
331 /* cache this readonly data; minimize chip reads */
332 ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
333
334 hcd->has_tt = 1;
335
336 retval = ehci_halt(ehci);
337 if (retval)
338 return retval;
339
340 /* data structure init */
341 retval = ehci_init(hcd);
342 if (retval)
343 return retval;
344
345 ehci->sbrn = 0x20;
346
347 ehci_reset(ehci);
348
349 retval = ehci_fsl_reinit(ehci);
350 return retval;
351}
352
353struct ehci_fsl {
354 struct ehci_hcd ehci;
355
356#ifdef CONFIG_PM
357 /* Saved USB PHY settings, need to restore after deep sleep. */
358 u32 usb_ctrl;
359#endif
360};
361
362#ifdef CONFIG_PM
363
364#ifdef CONFIG_PPC_MPC512x
365static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
366{
367 struct usb_hcd *hcd = dev_get_drvdata(dev);
368 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
369 struct fsl_usb2_platform_data *pdata = dev->platform_data;
370 u32 tmp;
371
372#ifdef DEBUG
373 u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
374 mode &= USBMODE_CM_MASK;
375 tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
376
377 dev_dbg(dev, "suspend=%d already_suspended=%d "
378 "mode=%d usbcmd %08x\n", pdata->suspended,
379 pdata->already_suspended, mode, tmp);
380#endif
381
382 /*
383 * If the controller is already suspended, then this must be a
384 * PM suspend. Remember this fact, so that we will leave the
385 * controller suspended at PM resume time.
386 */
387 if (pdata->suspended) {
388 dev_dbg(dev, "already suspended, leaving early\n");
389 pdata->already_suspended = 1;
390 return 0;
391 }
392
393 dev_dbg(dev, "suspending...\n");
394
395 hcd->state = HC_STATE_SUSPENDED;
396 dev->power.power_state = PMSG_SUSPEND;
397
398 /* ignore non-host interrupts */
399 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
400
401 /* stop the controller */
402 tmp = ehci_readl(ehci, &ehci->regs->command);
403 tmp &= ~CMD_RUN;
404 ehci_writel(ehci, tmp, &ehci->regs->command);
405
406 /* save EHCI registers */
407 pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
408 pdata->pm_command &= ~CMD_RUN;
409 pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
410 pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
411 pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
412 pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
413 pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
414 pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
415 pdata->pm_configured_flag =
416 ehci_readl(ehci, &ehci->regs->configured_flag);
417 pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
418 pdata->pm_usbgenctrl = ehci_readl(ehci,
419 hcd->regs + FSL_SOC_USB_USBGENCTRL);
420
421 /* clear the W1C bits */
422 pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
423
424 pdata->suspended = 1;
425
426 /* clear PP to cut power to the port */
427 tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
428 tmp &= ~PORT_POWER;
429 ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
430
431 return 0;
432}
433
434static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
435{
436 struct usb_hcd *hcd = dev_get_drvdata(dev);
437 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
438 struct fsl_usb2_platform_data *pdata = dev->platform_data;
439 u32 tmp;
440
441 dev_dbg(dev, "suspend=%d already_suspended=%d\n",
442 pdata->suspended, pdata->already_suspended);
443
444 /*
445 * If the controller was already suspended at suspend time,
446 * then don't resume it now.
447 */
448 if (pdata->already_suspended) {
449 dev_dbg(dev, "already suspended, leaving early\n");
450 pdata->already_suspended = 0;
451 return 0;
452 }
453
454 if (!pdata->suspended) {
455 dev_dbg(dev, "not suspended, leaving early\n");
456 return 0;
457 }
458
459 pdata->suspended = 0;
460
461 dev_dbg(dev, "resuming...\n");
462
463 /* set host mode */
464 tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
465 ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
466
467 ehci_writel(ehci, pdata->pm_usbgenctrl,
468 hcd->regs + FSL_SOC_USB_USBGENCTRL);
469 ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
470 hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
471
472 /* restore EHCI registers */
473 ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
474 ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
475 ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
476 ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
477 ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
478 ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
479 ehci_writel(ehci, pdata->pm_configured_flag,
480 &ehci->regs->configured_flag);
481 ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
482
483 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
484 hcd->state = HC_STATE_RUNNING;
485 dev->power.power_state = PMSG_ON;
486
487 tmp = ehci_readl(ehci, &ehci->regs->command);
488 tmp |= CMD_RUN;
489 ehci_writel(ehci, tmp, &ehci->regs->command);
490
491 usb_hcd_resume_root_hub(hcd);
492
493 return 0;
494}
495#else
496static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
497{
498 return 0;
499}
500
501static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
502{
503 return 0;
504}
505#endif /* CONFIG_PPC_MPC512x */
506
507static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
508{
509 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
510
511 return container_of(ehci, struct ehci_fsl, ehci);
512}
513
514static int ehci_fsl_drv_suspend(struct device *dev)
515{
516 struct usb_hcd *hcd = dev_get_drvdata(dev);
517 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
518 void __iomem *non_ehci = hcd->regs;
519
520 if (of_device_is_compatible(dev->parent->of_node,
521 "fsl,mpc5121-usb2-dr")) {
522 return ehci_fsl_mpc512x_drv_suspend(dev);
523 }
524
525 ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
526 device_may_wakeup(dev));
527 if (!fsl_deep_sleep())
528 return 0;
529
530 ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL);
531 return 0;
532}
533
534static int ehci_fsl_drv_resume(struct device *dev)
535{
536 struct usb_hcd *hcd = dev_get_drvdata(dev);
537 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
538 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
539 void __iomem *non_ehci = hcd->regs;
540
541 if (of_device_is_compatible(dev->parent->of_node,
542 "fsl,mpc5121-usb2-dr")) {
543 return ehci_fsl_mpc512x_drv_resume(dev);
544 }
545
546 ehci_prepare_ports_for_controller_resume(ehci);
547 if (!fsl_deep_sleep())
548 return 0;
549
550 usb_root_hub_lost_power(hcd->self.root_hub);
551
552 /* Restore USB PHY settings and enable the controller. */
553 out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl);
554
555 ehci_reset(ehci);
556 ehci_fsl_reinit(ehci);
557
558 return 0;
559}
560
561static int ehci_fsl_drv_restore(struct device *dev)
562{
563 struct usb_hcd *hcd = dev_get_drvdata(dev);
564
565 usb_root_hub_lost_power(hcd->self.root_hub);
566 return 0;
567}
568
569static struct dev_pm_ops ehci_fsl_pm_ops = {
570 .suspend = ehci_fsl_drv_suspend,
571 .resume = ehci_fsl_drv_resume,
572 .restore = ehci_fsl_drv_restore,
573};
574
575#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
576#else
577#define EHCI_FSL_PM_OPS NULL
578#endif /* CONFIG_PM */
579
580#ifdef CONFIG_USB_OTG
581static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
582{
583 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
584 u32 status;
585
586 if (!port)
587 return -EINVAL;
588
589 port--;
590
591 /* start port reset before HNP protocol time out */
592 status = readl(&ehci->regs->port_status[port]);
593 if (!(status & PORT_CONNECT))
594 return -ENODEV;
595
596 /* khubd will finish the reset later */
597 if (ehci_is_TDI(ehci)) {
598 writel(PORT_RESET |
599 (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
600 &ehci->regs->port_status[port]);
601 } else {
602 writel(PORT_RESET, &ehci->regs->port_status[port]);
603 }
604
605 return 0;
606}
607#else
608#define ehci_start_port_reset NULL
609#endif /* CONFIG_USB_OTG */
610
611
612static const struct hc_driver ehci_fsl_hc_driver = {
613 .description = hcd_name,
614 .product_desc = "Freescale On-Chip EHCI Host Controller",
615 .hcd_priv_size = sizeof(struct ehci_fsl),
616
617 /*
618 * generic hardware linkage
619 */
620 .irq = ehci_irq,
621 .flags = HCD_USB2 | HCD_MEMORY,
622
623 /*
624 * basic lifecycle operations
625 */
626 .reset = ehci_fsl_setup,
627 .start = ehci_run,
628 .stop = ehci_stop,
629 .shutdown = ehci_shutdown,
630
631 /*
632 * managing i/o requests and associated device resources
633 */
634 .urb_enqueue = ehci_urb_enqueue,
635 .urb_dequeue = ehci_urb_dequeue,
636 .endpoint_disable = ehci_endpoint_disable,
637 .endpoint_reset = ehci_endpoint_reset,
638
639 /*
640 * scheduling support
641 */
642 .get_frame_number = ehci_get_frame,
643
644 /*
645 * root hub support
646 */
647 .hub_status_data = ehci_hub_status_data,
648 .hub_control = ehci_hub_control,
649 .bus_suspend = ehci_bus_suspend,
650 .bus_resume = ehci_bus_resume,
651 .start_port_reset = ehci_start_port_reset,
652 .relinquish_port = ehci_relinquish_port,
653 .port_handed_over = ehci_port_handed_over,
654
655 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
656};
657
658static int ehci_fsl_drv_probe(struct platform_device *pdev)
659{
660 if (usb_disabled())
661 return -ENODEV;
662
663 /* FIXME we only want one one probe() not two */
664 return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
665}
666
667static int ehci_fsl_drv_remove(struct platform_device *pdev)
668{
669 struct usb_hcd *hcd = platform_get_drvdata(pdev);
670
671 /* FIXME we only want one one remove() not two */
672 usb_hcd_fsl_remove(hcd, pdev);
673 return 0;
674}
675
676MODULE_ALIAS("platform:fsl-ehci");
677
678static struct platform_driver ehci_fsl_driver = {
679 .probe = ehci_fsl_drv_probe,
680 .remove = ehci_fsl_drv_remove,
681 .shutdown = usb_hcd_platform_shutdown,
682 .driver = {
683 .name = "fsl-ehci",
684 .pm = EHCI_FSL_PM_OPS,
685 },
686};
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2005-2009 MontaVista Software, Inc.
4 * Copyright 2008,2012,2015 Freescale Semiconductor, Inc.
5 *
6 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
7 * by Hunter Wu.
8 * Power Management support by Dave Liu <daveliu@freescale.com>,
9 * Jerry Huang <Chang-Ming.Huang@freescale.com> and
10 * Anton Vorontsov <avorontsov@ru.mvista.com>.
11 */
12
13#include <linux/kernel.h>
14#include <linux/module.h>
15#include <linux/types.h>
16#include <linux/delay.h>
17#include <linux/pm.h>
18#include <linux/err.h>
19#include <linux/usb.h>
20#include <linux/usb/ehci_def.h>
21#include <linux/usb/hcd.h>
22#include <linux/usb/otg.h>
23#include <linux/platform_device.h>
24#include <linux/fsl_devices.h>
25#include <linux/of.h>
26#include <linux/io.h>
27
28#include "ehci.h"
29#include "ehci-fsl.h"
30
31#define DRIVER_DESC "Freescale EHCI Host controller driver"
32#define DRV_NAME "fsl-ehci"
33
34static struct hc_driver __read_mostly fsl_ehci_hc_driver;
35
36/* configure so an HC device and id are always provided */
37/* always called with process context; sleeping is OK */
38
39/*
40 * fsl_ehci_drv_probe - initialize FSL-based HCDs
41 * @pdev: USB Host Controller being probed
42 *
43 * Context: task context, might sleep
44 *
45 * Allocates basic resources for this USB host controller.
46 */
47static int fsl_ehci_drv_probe(struct platform_device *pdev)
48{
49 struct fsl_usb2_platform_data *pdata;
50 struct usb_hcd *hcd;
51 struct resource *res;
52 int irq;
53 int retval;
54 u32 tmp;
55
56 pr_debug("initializing FSL-SOC USB Controller\n");
57
58 /* Need platform data for setup */
59 pdata = dev_get_platdata(&pdev->dev);
60 if (!pdata) {
61 dev_err(&pdev->dev,
62 "No platform data for %s.\n", dev_name(&pdev->dev));
63 return -ENODEV;
64 }
65
66 /*
67 * This is a host mode driver, verify that we're supposed to be
68 * in host mode.
69 */
70 if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
71 (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
72 (pdata->operating_mode == FSL_USB2_DR_OTG))) {
73 dev_err(&pdev->dev,
74 "Non Host Mode configured for %s. Wrong driver linked.\n",
75 dev_name(&pdev->dev));
76 return -ENODEV;
77 }
78
79 irq = platform_get_irq(pdev, 0);
80 if (irq < 0)
81 return irq;
82
83 hcd = __usb_create_hcd(&fsl_ehci_hc_driver, pdev->dev.parent,
84 &pdev->dev, dev_name(&pdev->dev), NULL);
85 if (!hcd) {
86 retval = -ENOMEM;
87 goto err1;
88 }
89
90 hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
91 if (IS_ERR(hcd->regs)) {
92 retval = PTR_ERR(hcd->regs);
93 goto err2;
94 }
95
96 hcd->rsrc_start = res->start;
97 hcd->rsrc_len = resource_size(res);
98
99 pdata->regs = hcd->regs;
100
101 if (pdata->power_budget)
102 hcd->power_budget = pdata->power_budget;
103
104 /*
105 * do platform specific init: check the clock, grab/config pins, etc.
106 */
107 if (pdata->init && pdata->init(pdev)) {
108 retval = -ENODEV;
109 goto err2;
110 }
111
112 /* Enable USB controller, 83xx or 8536 */
113 if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) {
114 tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
115 tmp &= ~CONTROL_REGISTER_W1C_MASK;
116 tmp |= 0x4;
117 iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
118 }
119
120 /* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */
121 if (pdata->controller_ver == FSL_USB_VER_2_5 &&
122 pdata->phy_mode == FSL_USB2_PHY_ULPI)
123 iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL);
124
125 /*
126 * Enable UTMI phy and program PTS field in UTMI mode before asserting
127 * controller reset for USB Controller version 2.5
128 */
129 if (pdata->has_fsl_erratum_a007792) {
130 tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
131 tmp &= ~CONTROL_REGISTER_W1C_MASK;
132 tmp |= CTRL_UTMI_PHY_EN;
133 iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
134
135 writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
136 }
137
138 /* Don't need to set host mode here. It will be done by tdi_reset() */
139
140 retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
141 if (retval != 0)
142 goto err2;
143 device_wakeup_enable(hcd->self.controller);
144
145#ifdef CONFIG_USB_OTG
146 if (pdata->operating_mode == FSL_USB2_DR_OTG) {
147 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
148
149 hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
150 dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
151 hcd, ehci, hcd->usb_phy);
152
153 if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
154 retval = otg_set_host(hcd->usb_phy->otg,
155 &ehci_to_hcd(ehci)->self);
156 if (retval) {
157 usb_put_phy(hcd->usb_phy);
158 goto err2;
159 }
160 } else {
161 dev_err(&pdev->dev, "can't find phy\n");
162 retval = -ENODEV;
163 goto err2;
164 }
165
166 hcd->skip_phy_initialization = 1;
167 }
168#endif
169 return retval;
170
171 err2:
172 usb_put_hcd(hcd);
173 err1:
174 dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
175 if (pdata->exit)
176 pdata->exit(pdev);
177 return retval;
178}
179
180static bool usb_phy_clk_valid(struct usb_hcd *hcd)
181{
182 void __iomem *non_ehci = hcd->regs;
183 bool ret = true;
184
185 if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID))
186 ret = false;
187
188 return ret;
189}
190
191static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
192 enum fsl_usb2_phy_modes phy_mode,
193 unsigned int port_offset)
194{
195 u32 portsc, tmp;
196 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
197 void __iomem *non_ehci = hcd->regs;
198 struct device *dev = hcd->self.controller;
199 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
200
201 if (pdata->controller_ver < 0) {
202 dev_warn(hcd->self.controller, "Could not get controller version\n");
203 return -ENODEV;
204 }
205
206 portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
207 portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
208
209 switch (phy_mode) {
210 case FSL_USB2_PHY_ULPI:
211 if (pdata->have_sysif_regs && pdata->controller_ver) {
212 /* controller version 1.6 or above */
213 /* turn off UTMI PHY first */
214 tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
215 tmp &= ~(CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
216 iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
217
218 /* then turn on ULPI and enable USB controller */
219 tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
220 tmp &= ~CONTROL_REGISTER_W1C_MASK;
221 tmp |= ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN;
222 iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
223 }
224 portsc |= PORT_PTS_ULPI;
225 break;
226 case FSL_USB2_PHY_SERIAL:
227 portsc |= PORT_PTS_SERIAL;
228 break;
229 case FSL_USB2_PHY_UTMI_WIDE:
230 portsc |= PORT_PTS_PTW;
231 fallthrough;
232 case FSL_USB2_PHY_UTMI:
233 /* Presence of this node "has_fsl_erratum_a006918"
234 * in device-tree is used to stop USB controller
235 * initialization in Linux
236 */
237 if (pdata->has_fsl_erratum_a006918) {
238 dev_warn(dev, "USB PHY clock invalid\n");
239 return -EINVAL;
240 }
241 fallthrough;
242 case FSL_USB2_PHY_UTMI_DUAL:
243 /* PHY_CLK_VALID bit is de-featured from all controller
244 * versions below 2.4 and is to be checked only for
245 * internal UTMI phy
246 */
247 if (pdata->controller_ver > FSL_USB_VER_2_4 &&
248 pdata->have_sysif_regs && !usb_phy_clk_valid(hcd)) {
249 dev_err(dev, "USB PHY clock invalid\n");
250 return -EINVAL;
251 }
252
253 if (pdata->have_sysif_regs && pdata->controller_ver) {
254 /* controller version 1.6 or above */
255 tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
256 tmp &= ~CONTROL_REGISTER_W1C_MASK;
257 tmp |= UTMI_PHY_EN;
258 iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
259
260 mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
261 become stable - 10ms*/
262 }
263 /* enable UTMI PHY */
264 if (pdata->have_sysif_regs) {
265 tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
266 tmp &= ~CONTROL_REGISTER_W1C_MASK;
267 tmp |= CTRL_UTMI_PHY_EN;
268 iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
269 }
270 portsc |= PORT_PTS_UTMI;
271 break;
272 case FSL_USB2_PHY_NONE:
273 break;
274 }
275
276 if (pdata->have_sysif_regs &&
277 pdata->controller_ver > FSL_USB_VER_1_6 &&
278 !usb_phy_clk_valid(hcd)) {
279 dev_warn(hcd->self.controller, "USB PHY clock invalid\n");
280 return -EINVAL;
281 }
282
283 ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
284
285 if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) {
286 tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
287 tmp &= ~CONTROL_REGISTER_W1C_MASK;
288 tmp |= USB_CTRL_USB_EN;
289 iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
290 }
291
292 return 0;
293}
294
295static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
296{
297 struct usb_hcd *hcd = ehci_to_hcd(ehci);
298 struct fsl_usb2_platform_data *pdata;
299 void __iomem *non_ehci = hcd->regs;
300
301 pdata = dev_get_platdata(hcd->self.controller);
302
303 if (pdata->have_sysif_regs) {
304 /*
305 * Turn on cache snooping hardware, since some PowerPC platforms
306 * wholly rely on hardware to deal with cache coherent
307 */
308
309 /* Setup Snooping for all the 4GB space */
310 /* SNOOP1 starts from 0x0, size 2G */
311 iowrite32be(0x0 | SNOOP_SIZE_2GB,
312 non_ehci + FSL_SOC_USB_SNOOP1);
313 /* SNOOP2 starts from 0x80000000, size 2G */
314 iowrite32be(0x80000000 | SNOOP_SIZE_2GB,
315 non_ehci + FSL_SOC_USB_SNOOP2);
316 }
317
318 /* Deal with USB erratum A-005275 */
319 if (pdata->has_fsl_erratum_a005275 == 1)
320 ehci->has_fsl_hs_errata = 1;
321
322 if (pdata->has_fsl_erratum_a005697 == 1)
323 ehci->has_fsl_susp_errata = 1;
324
325 if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
326 (pdata->operating_mode == FSL_USB2_DR_OTG))
327 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
328 return -EINVAL;
329
330 if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
331
332 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
333 if (pdata->has_fsl_erratum_14 == 1)
334 ehci->has_fsl_port_bug = 1;
335
336 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
337 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
338 return -EINVAL;
339
340 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
341 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
342 return -EINVAL;
343 }
344
345 if (pdata->have_sysif_regs) {
346#ifdef CONFIG_FSL_SOC_BOOKE
347 iowrite32be(0x00000008, non_ehci + FSL_SOC_USB_PRICTRL);
348 iowrite32be(0x00000080, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
349#else
350 iowrite32be(0x0000000c, non_ehci + FSL_SOC_USB_PRICTRL);
351 iowrite32be(0x00000040, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
352#endif
353 iowrite32be(0x00000001, non_ehci + FSL_SOC_USB_SICTRL);
354 }
355
356 return 0;
357}
358
359/* called after powerup, by probe or system-pm "wakeup" */
360static int ehci_fsl_reinit(struct ehci_hcd *ehci)
361{
362 if (ehci_fsl_usb_setup(ehci))
363 return -EINVAL;
364
365 return 0;
366}
367
368/* called during probe() after chip reset completes */
369static int ehci_fsl_setup(struct usb_hcd *hcd)
370{
371 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
372 int retval;
373 struct fsl_usb2_platform_data *pdata;
374 struct device *dev;
375
376 dev = hcd->self.controller;
377 pdata = dev_get_platdata(hcd->self.controller);
378 ehci->big_endian_desc = pdata->big_endian_desc;
379 ehci->big_endian_mmio = pdata->big_endian_mmio;
380
381 /* EHCI registers start at offset 0x100 */
382 ehci->caps = hcd->regs + 0x100;
383
384#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_85xx)
385 /*
386 * Deal with MPC834X/85XX that need port power to be cycled
387 * after the power fault condition is removed. Otherwise the
388 * state machine does not reflect PORTSC[CSC] correctly.
389 */
390 ehci->need_oc_pp_cycle = 1;
391#endif
392
393 hcd->has_tt = 1;
394
395 retval = ehci_setup(hcd);
396 if (retval)
397 return retval;
398
399 if (of_device_is_compatible(dev->parent->of_node,
400 "fsl,mpc5121-usb2-dr")) {
401 /*
402 * set SBUSCFG:AHBBRST so that control msgs don't
403 * fail when doing heavy PATA writes.
404 */
405 ehci_writel(ehci, SBUSCFG_INCR8,
406 hcd->regs + FSL_SOC_USB_SBUSCFG);
407 }
408
409 retval = ehci_fsl_reinit(ehci);
410 return retval;
411}
412
413struct ehci_fsl {
414 struct ehci_hcd ehci;
415
416#ifdef CONFIG_PM
417 /* Saved USB PHY settings, need to restore after deep sleep. */
418 u32 usb_ctrl;
419#endif
420};
421
422#ifdef CONFIG_PM
423
424#ifdef CONFIG_PPC_MPC512x
425static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
426{
427 struct usb_hcd *hcd = dev_get_drvdata(dev);
428 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
429 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
430 u32 tmp;
431
432#ifdef CONFIG_DYNAMIC_DEBUG
433 u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
434 mode &= USBMODE_CM_MASK;
435 tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
436
437 dev_dbg(dev, "suspend=%d already_suspended=%d "
438 "mode=%d usbcmd %08x\n", pdata->suspended,
439 pdata->already_suspended, mode, tmp);
440#endif
441
442 /*
443 * If the controller is already suspended, then this must be a
444 * PM suspend. Remember this fact, so that we will leave the
445 * controller suspended at PM resume time.
446 */
447 if (pdata->suspended) {
448 dev_dbg(dev, "already suspended, leaving early\n");
449 pdata->already_suspended = 1;
450 return 0;
451 }
452
453 dev_dbg(dev, "suspending...\n");
454
455 ehci->rh_state = EHCI_RH_SUSPENDED;
456 dev->power.power_state = PMSG_SUSPEND;
457
458 /* ignore non-host interrupts */
459 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
460
461 /* stop the controller */
462 tmp = ehci_readl(ehci, &ehci->regs->command);
463 tmp &= ~CMD_RUN;
464 ehci_writel(ehci, tmp, &ehci->regs->command);
465
466 /* save EHCI registers */
467 pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
468 pdata->pm_command &= ~CMD_RUN;
469 pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
470 pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
471 pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
472 pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
473 pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
474 pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
475 pdata->pm_configured_flag =
476 ehci_readl(ehci, &ehci->regs->configured_flag);
477 pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
478 pdata->pm_usbgenctrl = ehci_readl(ehci,
479 hcd->regs + FSL_SOC_USB_USBGENCTRL);
480
481 /* clear the W1C bits */
482 pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
483
484 pdata->suspended = 1;
485
486 /* clear PP to cut power to the port */
487 tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
488 tmp &= ~PORT_POWER;
489 ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
490
491 return 0;
492}
493
494static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
495{
496 struct usb_hcd *hcd = dev_get_drvdata(dev);
497 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
498 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
499 u32 tmp;
500
501 dev_dbg(dev, "suspend=%d already_suspended=%d\n",
502 pdata->suspended, pdata->already_suspended);
503
504 /*
505 * If the controller was already suspended at suspend time,
506 * then don't resume it now.
507 */
508 if (pdata->already_suspended) {
509 dev_dbg(dev, "already suspended, leaving early\n");
510 pdata->already_suspended = 0;
511 return 0;
512 }
513
514 if (!pdata->suspended) {
515 dev_dbg(dev, "not suspended, leaving early\n");
516 return 0;
517 }
518
519 pdata->suspended = 0;
520
521 dev_dbg(dev, "resuming...\n");
522
523 /* set host mode */
524 tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
525 ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
526
527 ehci_writel(ehci, pdata->pm_usbgenctrl,
528 hcd->regs + FSL_SOC_USB_USBGENCTRL);
529 ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
530 hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
531
532 ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
533
534 /* restore EHCI registers */
535 ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
536 ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
537 ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
538 ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
539 ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
540 ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
541 ehci_writel(ehci, pdata->pm_configured_flag,
542 &ehci->regs->configured_flag);
543 ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
544
545 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
546 ehci->rh_state = EHCI_RH_RUNNING;
547 dev->power.power_state = PMSG_ON;
548
549 tmp = ehci_readl(ehci, &ehci->regs->command);
550 tmp |= CMD_RUN;
551 ehci_writel(ehci, tmp, &ehci->regs->command);
552
553 usb_hcd_resume_root_hub(hcd);
554
555 return 0;
556}
557#else
558static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
559{
560 return 0;
561}
562
563static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
564{
565 return 0;
566}
567#endif /* CONFIG_PPC_MPC512x */
568
569static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
570{
571 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
572
573 return container_of(ehci, struct ehci_fsl, ehci);
574}
575
576static int ehci_fsl_drv_suspend(struct device *dev)
577{
578 struct usb_hcd *hcd = dev_get_drvdata(dev);
579 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
580 void __iomem *non_ehci = hcd->regs;
581
582 if (of_device_is_compatible(dev->parent->of_node,
583 "fsl,mpc5121-usb2-dr")) {
584 return ehci_fsl_mpc512x_drv_suspend(dev);
585 }
586
587 ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
588 device_may_wakeup(dev));
589 if (!fsl_deep_sleep())
590 return 0;
591
592 ehci_fsl->usb_ctrl = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
593 return 0;
594}
595
596static int ehci_fsl_drv_resume(struct device *dev)
597{
598 struct usb_hcd *hcd = dev_get_drvdata(dev);
599 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
600 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
601 void __iomem *non_ehci = hcd->regs;
602
603 if (of_device_is_compatible(dev->parent->of_node,
604 "fsl,mpc5121-usb2-dr")) {
605 return ehci_fsl_mpc512x_drv_resume(dev);
606 }
607
608 ehci_prepare_ports_for_controller_resume(ehci);
609 if (!fsl_deep_sleep())
610 return 0;
611
612 usb_root_hub_lost_power(hcd->self.root_hub);
613
614 /* Restore USB PHY settings and enable the controller. */
615 iowrite32be(ehci_fsl->usb_ctrl, non_ehci + FSL_SOC_USB_CTRL);
616
617 ehci_reset(ehci);
618 ehci_fsl_reinit(ehci);
619
620 return 0;
621}
622
623static int ehci_fsl_drv_restore(struct device *dev)
624{
625 struct usb_hcd *hcd = dev_get_drvdata(dev);
626
627 usb_root_hub_lost_power(hcd->self.root_hub);
628 return 0;
629}
630
631static const struct dev_pm_ops ehci_fsl_pm_ops = {
632 .suspend = ehci_fsl_drv_suspend,
633 .resume = ehci_fsl_drv_resume,
634 .restore = ehci_fsl_drv_restore,
635};
636
637#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
638#else
639#define EHCI_FSL_PM_OPS NULL
640#endif /* CONFIG_PM */
641
642#ifdef CONFIG_USB_OTG
643static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
644{
645 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
646 u32 status;
647
648 if (!port)
649 return -EINVAL;
650
651 port--;
652
653 /* start port reset before HNP protocol time out */
654 status = readl(&ehci->regs->port_status[port]);
655 if (!(status & PORT_CONNECT))
656 return -ENODEV;
657
658 /* hub_wq will finish the reset later */
659 if (ehci_is_TDI(ehci)) {
660 writel(PORT_RESET |
661 (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
662 &ehci->regs->port_status[port]);
663 } else {
664 writel(PORT_RESET, &ehci->regs->port_status[port]);
665 }
666
667 return 0;
668}
669#else
670#define ehci_start_port_reset NULL
671#endif /* CONFIG_USB_OTG */
672
673static const struct ehci_driver_overrides ehci_fsl_overrides __initconst = {
674 .extra_priv_size = sizeof(struct ehci_fsl),
675 .reset = ehci_fsl_setup,
676};
677
678/**
679 * fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs
680 * @pdev: USB Host Controller being removed
681 *
682 * Context: task context, might sleep
683 *
684 * Reverses the effect of usb_hcd_fsl_probe().
685 */
686static void fsl_ehci_drv_remove(struct platform_device *pdev)
687{
688 struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
689 struct usb_hcd *hcd = platform_get_drvdata(pdev);
690
691 if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
692 otg_set_host(hcd->usb_phy->otg, NULL);
693 usb_put_phy(hcd->usb_phy);
694 }
695
696 usb_remove_hcd(hcd);
697
698 /*
699 * do platform specific un-initialization:
700 * release iomux pins, disable clock, etc.
701 */
702 if (pdata->exit)
703 pdata->exit(pdev);
704 usb_put_hcd(hcd);
705}
706
707static struct platform_driver ehci_fsl_driver = {
708 .probe = fsl_ehci_drv_probe,
709 .remove_new = fsl_ehci_drv_remove,
710 .shutdown = usb_hcd_platform_shutdown,
711 .driver = {
712 .name = DRV_NAME,
713 .pm = EHCI_FSL_PM_OPS,
714 },
715};
716
717static int __init ehci_fsl_init(void)
718{
719 if (usb_disabled())
720 return -ENODEV;
721
722 ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides);
723
724 fsl_ehci_hc_driver.product_desc =
725 "Freescale On-Chip EHCI Host Controller";
726 fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset;
727
728
729 return platform_driver_register(&ehci_fsl_driver);
730}
731module_init(ehci_fsl_init);
732
733static void __exit ehci_fsl_cleanup(void)
734{
735 platform_driver_unregister(&ehci_fsl_driver);
736}
737module_exit(ehci_fsl_cleanup);
738
739MODULE_DESCRIPTION(DRIVER_DESC);
740MODULE_LICENSE("GPL");
741MODULE_ALIAS("platform:" DRV_NAME);