Loading...
1/*
2 * linux/arch/arm/kernel/entry-common.S
3 *
4 * Copyright (C) 2000 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <asm/unistd.h>
12#include <asm/ftrace.h>
13#include <mach/entry-macro.S>
14#include <asm/unwind.h>
15
16#include "entry-header.S"
17
18
19 .align 5
20/*
21 * This is the fast syscall return path. We do as little as
22 * possible here, and this includes saving r0 back into the SVC
23 * stack.
24 */
25ret_fast_syscall:
26 UNWIND(.fnstart )
27 UNWIND(.cantunwind )
28 disable_irq @ disable interrupts
29 ldr r1, [tsk, #TI_FLAGS]
30 tst r1, #_TIF_WORK_MASK
31 bne fast_work_pending
32#if defined(CONFIG_IRQSOFF_TRACER)
33 asm_trace_hardirqs_on
34#endif
35
36 /* perform architecture specific actions before user return */
37 arch_ret_to_user r1, lr
38
39 restore_user_regs fast = 1, offset = S_OFF
40 UNWIND(.fnend )
41
42/*
43 * Ok, we need to do extra processing, enter the slow path.
44 */
45fast_work_pending:
46 str r0, [sp, #S_R0+S_OFF]! @ returned r0
47work_pending:
48 tst r1, #_TIF_NEED_RESCHED
49 bne work_resched
50 tst r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
51 beq no_work_pending
52 mov r0, sp @ 'regs'
53 mov r2, why @ 'syscall'
54 tst r1, #_TIF_SIGPENDING @ delivering a signal?
55 movne why, #0 @ prevent further restarts
56 bl do_notify_resume
57 b ret_slow_syscall @ Check work again
58
59work_resched:
60 bl schedule
61/*
62 * "slow" syscall return path. "why" tells us if this was a real syscall.
63 */
64ENTRY(ret_to_user)
65ret_slow_syscall:
66 disable_irq @ disable interrupts
67ENTRY(ret_to_user_from_irq)
68 ldr r1, [tsk, #TI_FLAGS]
69 tst r1, #_TIF_WORK_MASK
70 bne work_pending
71no_work_pending:
72#if defined(CONFIG_IRQSOFF_TRACER)
73 asm_trace_hardirqs_on
74#endif
75 /* perform architecture specific actions before user return */
76 arch_ret_to_user r1, lr
77
78 restore_user_regs fast = 0, offset = 0
79ENDPROC(ret_to_user_from_irq)
80ENDPROC(ret_to_user)
81
82/*
83 * This is how we return from a fork.
84 */
85ENTRY(ret_from_fork)
86 bl schedule_tail
87 get_thread_info tsk
88 ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing
89 mov why, #1
90 tst r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
91 beq ret_slow_syscall
92 mov r1, sp
93 mov r0, #1 @ trace exit [IP = 1]
94 bl syscall_trace
95 b ret_slow_syscall
96ENDPROC(ret_from_fork)
97
98 .equ NR_syscalls,0
99#define CALL(x) .equ NR_syscalls,NR_syscalls+1
100#include "calls.S"
101#undef CALL
102#define CALL(x) .long x
103
104#ifdef CONFIG_FUNCTION_TRACER
105/*
106 * When compiling with -pg, gcc inserts a call to the mcount routine at the
107 * start of every function. In mcount, apart from the function's address (in
108 * lr), we need to get hold of the function's caller's address.
109 *
110 * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this:
111 *
112 * bl mcount
113 *
114 * These versions have the limitation that in order for the mcount routine to
115 * be able to determine the function's caller's address, an APCS-style frame
116 * pointer (which is set up with something like the code below) is required.
117 *
118 * mov ip, sp
119 * push {fp, ip, lr, pc}
120 * sub fp, ip, #4
121 *
122 * With EABI, these frame pointers are not available unless -mapcs-frame is
123 * specified, and if building as Thumb-2, not even then.
124 *
125 * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount,
126 * with call sites like:
127 *
128 * push {lr}
129 * bl __gnu_mcount_nc
130 *
131 * With these compilers, frame pointers are not necessary.
132 *
133 * mcount can be thought of as a function called in the middle of a subroutine
134 * call. As such, it needs to be transparent for both the caller and the
135 * callee: the original lr needs to be restored when leaving mcount, and no
136 * registers should be clobbered. (In the __gnu_mcount_nc implementation, we
137 * clobber the ip register. This is OK because the ARM calling convention
138 * allows it to be clobbered in subroutines and doesn't use it to hold
139 * parameters.)
140 *
141 * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0"
142 * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see
143 * arch/arm/kernel/ftrace.c).
144 */
145
146#ifndef CONFIG_OLD_MCOUNT
147#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4))
148#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0.
149#endif
150#endif
151
152.macro __mcount suffix
153 mcount_enter
154 ldr r0, =ftrace_trace_function
155 ldr r2, [r0]
156 adr r0, .Lftrace_stub
157 cmp r0, r2
158 bne 1f
159
160#ifdef CONFIG_FUNCTION_GRAPH_TRACER
161 ldr r1, =ftrace_graph_return
162 ldr r2, [r1]
163 cmp r0, r2
164 bne ftrace_graph_caller\suffix
165
166 ldr r1, =ftrace_graph_entry
167 ldr r2, [r1]
168 ldr r0, =ftrace_graph_entry_stub
169 cmp r0, r2
170 bne ftrace_graph_caller\suffix
171#endif
172
173 mcount_exit
174
1751: mcount_get_lr r1 @ lr of instrumented func
176 mov r0, lr @ instrumented function
177 sub r0, r0, #MCOUNT_INSN_SIZE
178 adr lr, BSYM(2f)
179 mov pc, r2
1802: mcount_exit
181.endm
182
183.macro __ftrace_caller suffix
184 mcount_enter
185
186 mcount_get_lr r1 @ lr of instrumented func
187 mov r0, lr @ instrumented function
188 sub r0, r0, #MCOUNT_INSN_SIZE
189
190 .globl ftrace_call\suffix
191ftrace_call\suffix:
192 bl ftrace_stub
193
194#ifdef CONFIG_FUNCTION_GRAPH_TRACER
195 .globl ftrace_graph_call\suffix
196ftrace_graph_call\suffix:
197 mov r0, r0
198#endif
199
200 mcount_exit
201.endm
202
203.macro __ftrace_graph_caller
204 sub r0, fp, #4 @ &lr of instrumented routine (&parent)
205#ifdef CONFIG_DYNAMIC_FTRACE
206 @ called from __ftrace_caller, saved in mcount_enter
207 ldr r1, [sp, #16] @ instrumented routine (func)
208#else
209 @ called from __mcount, untouched in lr
210 mov r1, lr @ instrumented routine (func)
211#endif
212 sub r1, r1, #MCOUNT_INSN_SIZE
213 mov r2, fp @ frame pointer
214 bl prepare_ftrace_return
215 mcount_exit
216.endm
217
218#ifdef CONFIG_OLD_MCOUNT
219/*
220 * mcount
221 */
222
223.macro mcount_enter
224 stmdb sp!, {r0-r3, lr}
225.endm
226
227.macro mcount_get_lr reg
228 ldr \reg, [fp, #-4]
229.endm
230
231.macro mcount_exit
232 ldr lr, [fp, #-4]
233 ldmia sp!, {r0-r3, pc}
234.endm
235
236ENTRY(mcount)
237#ifdef CONFIG_DYNAMIC_FTRACE
238 stmdb sp!, {lr}
239 ldr lr, [fp, #-4]
240 ldmia sp!, {pc}
241#else
242 __mcount _old
243#endif
244ENDPROC(mcount)
245
246#ifdef CONFIG_DYNAMIC_FTRACE
247ENTRY(ftrace_caller_old)
248 __ftrace_caller _old
249ENDPROC(ftrace_caller_old)
250#endif
251
252#ifdef CONFIG_FUNCTION_GRAPH_TRACER
253ENTRY(ftrace_graph_caller_old)
254 __ftrace_graph_caller
255ENDPROC(ftrace_graph_caller_old)
256#endif
257
258.purgem mcount_enter
259.purgem mcount_get_lr
260.purgem mcount_exit
261#endif
262
263/*
264 * __gnu_mcount_nc
265 */
266
267.macro mcount_enter
268 stmdb sp!, {r0-r3, lr}
269.endm
270
271.macro mcount_get_lr reg
272 ldr \reg, [sp, #20]
273.endm
274
275.macro mcount_exit
276 ldmia sp!, {r0-r3, ip, lr}
277 mov pc, ip
278.endm
279
280ENTRY(__gnu_mcount_nc)
281#ifdef CONFIG_DYNAMIC_FTRACE
282 mov ip, lr
283 ldmia sp!, {lr}
284 mov pc, ip
285#else
286 __mcount
287#endif
288ENDPROC(__gnu_mcount_nc)
289
290#ifdef CONFIG_DYNAMIC_FTRACE
291ENTRY(ftrace_caller)
292 __ftrace_caller
293ENDPROC(ftrace_caller)
294#endif
295
296#ifdef CONFIG_FUNCTION_GRAPH_TRACER
297ENTRY(ftrace_graph_caller)
298 __ftrace_graph_caller
299ENDPROC(ftrace_graph_caller)
300#endif
301
302.purgem mcount_enter
303.purgem mcount_get_lr
304.purgem mcount_exit
305
306#ifdef CONFIG_FUNCTION_GRAPH_TRACER
307 .globl return_to_handler
308return_to_handler:
309 stmdb sp!, {r0-r3}
310 mov r0, fp @ frame pointer
311 bl ftrace_return_to_handler
312 mov lr, r0 @ r0 has real ret addr
313 ldmia sp!, {r0-r3}
314 mov pc, lr
315#endif
316
317ENTRY(ftrace_stub)
318.Lftrace_stub:
319 mov pc, lr
320ENDPROC(ftrace_stub)
321
322#endif /* CONFIG_FUNCTION_TRACER */
323
324/*=============================================================================
325 * SWI handler
326 *-----------------------------------------------------------------------------
327 */
328
329 /* If we're optimising for StrongARM the resulting code won't
330 run on an ARM7 and we can save a couple of instructions.
331 --pb */
332#ifdef CONFIG_CPU_ARM710
333#define A710(code...) code
334.Larm710bug:
335 ldmia sp, {r0 - lr}^ @ Get calling r0 - lr
336 mov r0, r0
337 add sp, sp, #S_FRAME_SIZE
338 subs pc, lr, #4
339#else
340#define A710(code...)
341#endif
342
343 .align 5
344ENTRY(vector_swi)
345 sub sp, sp, #S_FRAME_SIZE
346 stmia sp, {r0 - r12} @ Calling r0 - r12
347 ARM( add r8, sp, #S_PC )
348 ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr
349 THUMB( mov r8, sp )
350 THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr
351 mrs r8, spsr @ called from non-FIQ mode, so ok.
352 str lr, [sp, #S_PC] @ Save calling PC
353 str r8, [sp, #S_PSR] @ Save CPSR
354 str r0, [sp, #S_OLD_R0] @ Save OLD_R0
355 zero_fp
356
357 /*
358 * Get the system call number.
359 */
360
361#if defined(CONFIG_OABI_COMPAT)
362
363 /*
364 * If we have CONFIG_OABI_COMPAT then we need to look at the swi
365 * value to determine if it is an EABI or an old ABI call.
366 */
367#ifdef CONFIG_ARM_THUMB
368 tst r8, #PSR_T_BIT
369 movne r10, #0 @ no thumb OABI emulation
370 ldreq r10, [lr, #-4] @ get SWI instruction
371#else
372 ldr r10, [lr, #-4] @ get SWI instruction
373 A710( and ip, r10, #0x0f000000 @ check for SWI )
374 A710( teq ip, #0x0f000000 )
375 A710( bne .Larm710bug )
376#endif
377#ifdef CONFIG_CPU_ENDIAN_BE8
378 rev r10, r10 @ little endian instruction
379#endif
380
381#elif defined(CONFIG_AEABI)
382
383 /*
384 * Pure EABI user space always put syscall number into scno (r7).
385 */
386 A710( ldr ip, [lr, #-4] @ get SWI instruction )
387 A710( and ip, ip, #0x0f000000 @ check for SWI )
388 A710( teq ip, #0x0f000000 )
389 A710( bne .Larm710bug )
390
391#elif defined(CONFIG_ARM_THUMB)
392
393 /* Legacy ABI only, possibly thumb mode. */
394 tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
395 addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
396 ldreq scno, [lr, #-4]
397
398#else
399
400 /* Legacy ABI only. */
401 ldr scno, [lr, #-4] @ get SWI instruction
402 A710( and ip, scno, #0x0f000000 @ check for SWI )
403 A710( teq ip, #0x0f000000 )
404 A710( bne .Larm710bug )
405
406#endif
407
408#ifdef CONFIG_ALIGNMENT_TRAP
409 ldr ip, __cr_alignment
410 ldr ip, [ip]
411 mcr p15, 0, ip, c1, c0 @ update control register
412#endif
413 enable_irq
414
415 get_thread_info tsk
416 adr tbl, sys_call_table @ load syscall table pointer
417
418#if defined(CONFIG_OABI_COMPAT)
419 /*
420 * If the swi argument is zero, this is an EABI call and we do nothing.
421 *
422 * If this is an old ABI call, get the syscall number into scno and
423 * get the old ABI syscall table address.
424 */
425 bics r10, r10, #0xff000000
426 eorne scno, r10, #__NR_OABI_SYSCALL_BASE
427 ldrne tbl, =sys_oabi_call_table
428#elif !defined(CONFIG_AEABI)
429 bic scno, scno, #0xff000000 @ mask off SWI op-code
430 eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
431#endif
432
433 ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing
434 stmdb sp!, {r4, r5} @ push fifth and sixth args
435
436#ifdef CONFIG_SECCOMP
437 tst r10, #_TIF_SECCOMP
438 beq 1f
439 mov r0, scno
440 bl __secure_computing
441 add r0, sp, #S_R0 + S_OFF @ pointer to regs
442 ldmia r0, {r0 - r3} @ have to reload r0 - r3
4431:
444#endif
445
446 tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
447 bne __sys_trace
448
449 cmp scno, #NR_syscalls @ check upper syscall limit
450 adr lr, BSYM(ret_fast_syscall) @ return address
451 ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
452
453 add r1, sp, #S_OFF
4542: mov why, #0 @ no longer a real syscall
455 cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
456 eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
457 bcs arm_syscall
458 b sys_ni_syscall @ not private func
459ENDPROC(vector_swi)
460
461 /*
462 * This is the really slow path. We're going to be doing
463 * context switches, and waiting for our parent to respond.
464 */
465__sys_trace:
466 mov r2, scno
467 add r1, sp, #S_OFF
468 mov r0, #0 @ trace entry [IP = 0]
469 bl syscall_trace
470
471 adr lr, BSYM(__sys_trace_return) @ return address
472 mov scno, r0 @ syscall number (possibly new)
473 add r1, sp, #S_R0 + S_OFF @ pointer to regs
474 cmp scno, #NR_syscalls @ check upper syscall limit
475 ldmccia r1, {r0 - r3} @ have to reload r0 - r3
476 ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
477 b 2b
478
479__sys_trace_return:
480 str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
481 mov r2, scno
482 mov r1, sp
483 mov r0, #1 @ trace exit [IP = 1]
484 bl syscall_trace
485 b ret_slow_syscall
486
487 .align 5
488#ifdef CONFIG_ALIGNMENT_TRAP
489 .type __cr_alignment, #object
490__cr_alignment:
491 .word cr_alignment
492#endif
493 .ltorg
494
495/*
496 * This is the syscall table declaration for native ABI syscalls.
497 * With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
498 */
499#define ABI(native, compat) native
500#ifdef CONFIG_AEABI
501#define OBSOLETE(syscall) sys_ni_syscall
502#else
503#define OBSOLETE(syscall) syscall
504#endif
505
506 .type sys_call_table, #object
507ENTRY(sys_call_table)
508#include "calls.S"
509#undef ABI
510#undef OBSOLETE
511
512/*============================================================================
513 * Special system call wrappers
514 */
515@ r0 = syscall number
516@ r8 = syscall table
517sys_syscall:
518 bic scno, r0, #__NR_OABI_SYSCALL_BASE
519 cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
520 cmpne scno, #NR_syscalls @ check range
521 stmloia sp, {r5, r6} @ shuffle args
522 movlo r0, r1
523 movlo r1, r2
524 movlo r2, r3
525 movlo r3, r4
526 ldrlo pc, [tbl, scno, lsl #2]
527 b sys_ni_syscall
528ENDPROC(sys_syscall)
529
530sys_fork_wrapper:
531 add r0, sp, #S_OFF
532 b sys_fork
533ENDPROC(sys_fork_wrapper)
534
535sys_vfork_wrapper:
536 add r0, sp, #S_OFF
537 b sys_vfork
538ENDPROC(sys_vfork_wrapper)
539
540sys_execve_wrapper:
541 add r3, sp, #S_OFF
542 b sys_execve
543ENDPROC(sys_execve_wrapper)
544
545sys_clone_wrapper:
546 add ip, sp, #S_OFF
547 str ip, [sp, #4]
548 b sys_clone
549ENDPROC(sys_clone_wrapper)
550
551sys_sigreturn_wrapper:
552 add r0, sp, #S_OFF
553 mov why, #0 @ prevent syscall restart handling
554 b sys_sigreturn
555ENDPROC(sys_sigreturn_wrapper)
556
557sys_rt_sigreturn_wrapper:
558 add r0, sp, #S_OFF
559 mov why, #0 @ prevent syscall restart handling
560 b sys_rt_sigreturn
561ENDPROC(sys_rt_sigreturn_wrapper)
562
563sys_sigaltstack_wrapper:
564 ldr r2, [sp, #S_OFF + S_SP]
565 b do_sigaltstack
566ENDPROC(sys_sigaltstack_wrapper)
567
568sys_statfs64_wrapper:
569 teq r1, #88
570 moveq r1, #84
571 b sys_statfs64
572ENDPROC(sys_statfs64_wrapper)
573
574sys_fstatfs64_wrapper:
575 teq r1, #88
576 moveq r1, #84
577 b sys_fstatfs64
578ENDPROC(sys_fstatfs64_wrapper)
579
580/*
581 * Note: off_4k (r5) is always units of 4K. If we can't do the requested
582 * offset, we return EINVAL.
583 */
584sys_mmap2:
585#if PAGE_SHIFT > 12
586 tst r5, #PGOFF_MASK
587 moveq r5, r5, lsr #PAGE_SHIFT - 12
588 streq r5, [sp, #4]
589 beq sys_mmap_pgoff
590 mov r0, #-EINVAL
591 mov pc, lr
592#else
593 str r5, [sp, #4]
594 b sys_mmap_pgoff
595#endif
596ENDPROC(sys_mmap2)
597
598#ifdef CONFIG_OABI_COMPAT
599
600/*
601 * These are syscalls with argument register differences
602 */
603
604sys_oabi_pread64:
605 stmia sp, {r3, r4}
606 b sys_pread64
607ENDPROC(sys_oabi_pread64)
608
609sys_oabi_pwrite64:
610 stmia sp, {r3, r4}
611 b sys_pwrite64
612ENDPROC(sys_oabi_pwrite64)
613
614sys_oabi_truncate64:
615 mov r3, r2
616 mov r2, r1
617 b sys_truncate64
618ENDPROC(sys_oabi_truncate64)
619
620sys_oabi_ftruncate64:
621 mov r3, r2
622 mov r2, r1
623 b sys_ftruncate64
624ENDPROC(sys_oabi_ftruncate64)
625
626sys_oabi_readahead:
627 str r3, [sp]
628 mov r3, r2
629 mov r2, r1
630 b sys_readahead
631ENDPROC(sys_oabi_readahead)
632
633/*
634 * Let's declare a second syscall table for old ABI binaries
635 * using the compatibility syscall entries.
636 */
637#define ABI(native, compat) compat
638#define OBSOLETE(syscall) syscall
639
640 .type sys_oabi_call_table, #object
641ENTRY(sys_oabi_call_table)
642#include "calls.S"
643#undef ABI
644#undef OBSOLETE
645
646#endif
647
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/arch/arm/kernel/entry-common.S
4 *
5 * Copyright (C) 2000 Russell King
6 */
7
8#include <asm/assembler.h>
9#include <asm/unistd.h>
10#include <asm/ftrace.h>
11#include <asm/unwind.h>
12#include <asm/page.h>
13#ifdef CONFIG_AEABI
14#include <asm/unistd-oabi.h>
15#endif
16
17 .equ NR_syscalls, __NR_syscalls
18
19#include "entry-header.S"
20
21saved_psr .req r8
22#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING_USER)
23saved_pc .req r9
24#define TRACE(x...) x
25#else
26saved_pc .req lr
27#define TRACE(x...)
28#endif
29
30 .section .entry.text,"ax",%progbits
31 .align 5
32#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING_USER) || \
33 IS_ENABLED(CONFIG_DEBUG_RSEQ))
34/*
35 * This is the fast syscall return path. We do as little as possible here,
36 * such as avoiding writing r0 to the stack. We only use this path if we
37 * have tracing, context tracking and rseq debug disabled - the overheads
38 * from those features make this path too inefficient.
39 */
40ret_fast_syscall:
41__ret_fast_syscall:
42 UNWIND(.fnstart )
43 UNWIND(.cantunwind )
44 disable_irq_notrace @ disable interrupts
45 ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
46 movs r1, r1, lsl #16
47 bne fast_work_pending
48
49 restore_user_regs fast = 1, offset = S_OFF
50 UNWIND(.fnend )
51ENDPROC(ret_fast_syscall)
52
53 /* Ok, we need to do extra processing, enter the slow path. */
54fast_work_pending:
55 str r0, [sp, #S_R0+S_OFF]! @ returned r0
56 /* fall through to work_pending */
57#else
58/*
59 * The "replacement" ret_fast_syscall for when tracing, context tracking,
60 * or rseq debug is enabled. As we will need to call out to some C functions,
61 * we save r0 first to avoid needing to save registers around each C function
62 * call.
63 */
64ret_fast_syscall:
65__ret_fast_syscall:
66 UNWIND(.fnstart )
67 UNWIND(.cantunwind )
68 str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
69#if IS_ENABLED(CONFIG_DEBUG_RSEQ)
70 /* do_rseq_syscall needs interrupts enabled. */
71 mov r0, sp @ 'regs'
72 bl do_rseq_syscall
73#endif
74 disable_irq_notrace @ disable interrupts
75 ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
76 movs r1, r1, lsl #16
77 beq no_work_pending
78 UNWIND(.fnend )
79ENDPROC(ret_fast_syscall)
80
81 /* Slower path - fall through to work_pending */
82#endif
83
84 tst r1, #_TIF_SYSCALL_WORK
85 bne __sys_trace_return_nosave
86slow_work_pending:
87 mov r0, sp @ 'regs'
88 mov r2, why @ 'syscall'
89 bl do_work_pending
90 cmp r0, #0
91 beq no_work_pending
92 movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE)
93 str scno, [tsk, #TI_ABI_SYSCALL] @ make sure tracers see update
94 ldmia sp, {r0 - r6} @ have to reload r0 - r6
95 b local_restart @ ... and off we go
96ENDPROC(ret_fast_syscall)
97
98/*
99 * "slow" syscall return path. "why" tells us if this was a real syscall.
100 * IRQs may be enabled here, so always disable them. Note that we use the
101 * "notrace" version to avoid calling into the tracing code unnecessarily.
102 * do_work_pending() will update this state if necessary.
103 */
104ENTRY(ret_to_user)
105ret_slow_syscall:
106#if IS_ENABLED(CONFIG_DEBUG_RSEQ)
107 /* do_rseq_syscall needs interrupts enabled. */
108 enable_irq_notrace @ enable interrupts
109 mov r0, sp @ 'regs'
110 bl do_rseq_syscall
111#endif
112 disable_irq_notrace @ disable interrupts
113ENTRY(ret_to_user_from_irq)
114 ldr r1, [tsk, #TI_FLAGS]
115 movs r1, r1, lsl #16
116 bne slow_work_pending
117no_work_pending:
118 asm_trace_hardirqs_on save = 0
119
120 ct_user_enter save = 0
121
122 restore_user_regs fast = 0, offset = 0
123ENDPROC(ret_to_user_from_irq)
124ENDPROC(ret_to_user)
125
126/*
127 * This is how we return from a fork.
128 */
129ENTRY(ret_from_fork)
130 bl schedule_tail
131 cmp r5, #0
132 movne r0, r4
133 badrne lr, 1f
134 retne r5
1351: get_thread_info tsk
136 b ret_slow_syscall
137ENDPROC(ret_from_fork)
138
139/*=============================================================================
140 * SWI handler
141 *-----------------------------------------------------------------------------
142 */
143
144 .align 5
145#ifdef CONFIG_HARDEN_BRANCH_HISTORY
146ENTRY(vector_bhb_loop8_swi)
147 sub sp, sp, #PT_REGS_SIZE
148 stmia sp, {r0 - r12}
149 mov r8, #8
1501: b 2f
1512: subs r8, r8, #1
152 bne 1b
153 dsb nsh
154 isb
155 b 3f
156ENDPROC(vector_bhb_loop8_swi)
157
158 .align 5
159ENTRY(vector_bhb_bpiall_swi)
160 sub sp, sp, #PT_REGS_SIZE
161 stmia sp, {r0 - r12}
162 mcr p15, 0, r8, c7, c5, 6 @ BPIALL
163 isb
164 b 3f
165ENDPROC(vector_bhb_bpiall_swi)
166#endif
167 .align 5
168ENTRY(vector_swi)
169#ifdef CONFIG_CPU_V7M
170 v7m_exception_entry
171#else
172 sub sp, sp, #PT_REGS_SIZE
173 stmia sp, {r0 - r12} @ Calling r0 - r12
1743:
175 ARM( add r8, sp, #S_PC )
176 ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr
177 THUMB( mov r8, sp )
178 THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr
179 mrs saved_psr, spsr @ called from non-FIQ mode, so ok.
180 TRACE( mov saved_pc, lr )
181 str saved_pc, [sp, #S_PC] @ Save calling PC
182 str saved_psr, [sp, #S_PSR] @ Save CPSR
183 str r0, [sp, #S_OLD_R0] @ Save OLD_R0
184#endif
185 reload_current r10, ip
186 zero_fp
187 alignment_trap r10, ip, cr_alignment
188 asm_trace_hardirqs_on save=0
189 enable_irq_notrace
190 ct_user_exit save=0
191
192 /*
193 * Get the system call number.
194 */
195
196#if defined(CONFIG_OABI_COMPAT)
197
198 /*
199 * If we have CONFIG_OABI_COMPAT then we need to look at the swi
200 * value to determine if it is an EABI or an old ABI call.
201 */
202#ifdef CONFIG_ARM_THUMB
203 tst saved_psr, #PSR_T_BIT
204 movne r10, #0 @ no thumb OABI emulation
205 USER( ldreq r10, [saved_pc, #-4] ) @ get SWI instruction
206#else
207 USER( ldr r10, [saved_pc, #-4] ) @ get SWI instruction
208#endif
209 ARM_BE8(rev r10, r10) @ little endian instruction
210
211#elif defined(CONFIG_AEABI)
212
213 /*
214 * Pure EABI user space always put syscall number into scno (r7).
215 */
216#elif defined(CONFIG_ARM_THUMB)
217 /* Legacy ABI only, possibly thumb mode. */
218 tst saved_psr, #PSR_T_BIT @ this is SPSR from save_user_regs
219 addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
220 USER( ldreq scno, [saved_pc, #-4] )
221
222#else
223 /* Legacy ABI only. */
224 USER( ldr scno, [saved_pc, #-4] ) @ get SWI instruction
225#endif
226
227 /* saved_psr and saved_pc are now dead */
228
229 uaccess_disable tbl
230 get_thread_info tsk
231
232 adr tbl, sys_call_table @ load syscall table pointer
233
234#if defined(CONFIG_OABI_COMPAT)
235 /*
236 * If the swi argument is zero, this is an EABI call and we do nothing.
237 *
238 * If this is an old ABI call, get the syscall number into scno and
239 * get the old ABI syscall table address.
240 */
241 bics r10, r10, #0xff000000
242 strne r10, [tsk, #TI_ABI_SYSCALL]
243 streq scno, [tsk, #TI_ABI_SYSCALL]
244 eorne scno, r10, #__NR_OABI_SYSCALL_BASE
245 ldrne tbl, =sys_oabi_call_table
246#elif !defined(CONFIG_AEABI)
247 bic scno, scno, #0xff000000 @ mask off SWI op-code
248 str scno, [tsk, #TI_ABI_SYSCALL]
249 eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
250#else
251 str scno, [tsk, #TI_ABI_SYSCALL]
252#endif
253 /*
254 * Reload the registers that may have been corrupted on entry to
255 * the syscall assembly (by tracing or context tracking.)
256 */
257 TRACE( ldmia sp, {r0 - r3} )
258
259local_restart:
260 ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing
261 stmdb sp!, {r4, r5} @ push fifth and sixth args
262
263 tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls?
264 bne __sys_trace
265
266 invoke_syscall tbl, scno, r10, __ret_fast_syscall
267
268 add r1, sp, #S_OFF
2692: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
270 eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
271 bcs arm_syscall
272 mov why, #0 @ no longer a real syscall
273 b sys_ni_syscall @ not private func
274
275#if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
276 /*
277 * We failed to handle a fault trying to access the page
278 * containing the swi instruction, but we're not really in a
279 * position to return -EFAULT. Instead, return back to the
280 * instruction and re-enter the user fault handling path trying
281 * to page it in. This will likely result in sending SEGV to the
282 * current task.
283 */
2849001:
285 sub lr, saved_pc, #4
286 str lr, [sp, #S_PC]
287 get_thread_info tsk
288 b ret_fast_syscall
289#endif
290ENDPROC(vector_swi)
291 .ltorg
292
293 /*
294 * This is the really slow path. We're going to be doing
295 * context switches, and waiting for our parent to respond.
296 */
297__sys_trace:
298 add r0, sp, #S_OFF
299 bl syscall_trace_enter
300 mov scno, r0
301 invoke_syscall tbl, scno, r10, __sys_trace_return, reload=1
302 cmp scno, #-1 @ skip the syscall?
303 bne 2b
304 add sp, sp, #S_OFF @ restore stack
305
306__sys_trace_return_nosave:
307 enable_irq_notrace
308 mov r0, sp
309 bl syscall_trace_exit
310 b ret_slow_syscall
311
312__sys_trace_return:
313 str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
314 mov r0, sp
315 bl syscall_trace_exit
316 b ret_slow_syscall
317
318 .macro syscall_table_start, sym
319 .equ __sys_nr, 0
320 .type \sym, #object
321ENTRY(\sym)
322 .endm
323
324 .macro syscall, nr, func
325 .ifgt __sys_nr - \nr
326 .error "Duplicated/unorded system call entry"
327 .endif
328 .rept \nr - __sys_nr
329 .long sys_ni_syscall
330 .endr
331 .long \func
332 .equ __sys_nr, \nr + 1
333 .endm
334
335 .macro syscall_table_end, sym
336 .ifgt __sys_nr - __NR_syscalls
337 .error "System call table too big"
338 .endif
339 .rept __NR_syscalls - __sys_nr
340 .long sys_ni_syscall
341 .endr
342 .size \sym, . - \sym
343 .endm
344
345#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
346#define __SYSCALL(nr, func) syscall nr, func
347
348/*
349 * This is the syscall table declaration for native ABI syscalls.
350 * With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
351 */
352 syscall_table_start sys_call_table
353#ifdef CONFIG_AEABI
354#include <calls-eabi.S>
355#else
356#include <calls-oabi.S>
357#endif
358 syscall_table_end sys_call_table
359
360/*============================================================================
361 * Special system call wrappers
362 */
363@ r0 = syscall number
364@ r8 = syscall table
365sys_syscall:
366 bic scno, r0, #__NR_OABI_SYSCALL_BASE
367 cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
368 cmpne scno, #NR_syscalls @ check range
369#ifdef CONFIG_CPU_SPECTRE
370 movhs scno, #0
371 csdb
372#endif
373 stmialo sp, {r5, r6} @ shuffle args
374 movlo r0, r1
375 movlo r1, r2
376 movlo r2, r3
377 movlo r3, r4
378 ldrlo pc, [tbl, scno, lsl #2]
379 b sys_ni_syscall
380ENDPROC(sys_syscall)
381
382sys_sigreturn_wrapper:
383 add r0, sp, #S_OFF
384 mov why, #0 @ prevent syscall restart handling
385 b sys_sigreturn
386ENDPROC(sys_sigreturn_wrapper)
387
388sys_rt_sigreturn_wrapper:
389 add r0, sp, #S_OFF
390 mov why, #0 @ prevent syscall restart handling
391 b sys_rt_sigreturn
392ENDPROC(sys_rt_sigreturn_wrapper)
393
394sys_statfs64_wrapper:
395 teq r1, #88
396 moveq r1, #84
397 b sys_statfs64
398ENDPROC(sys_statfs64_wrapper)
399
400sys_fstatfs64_wrapper:
401 teq r1, #88
402 moveq r1, #84
403 b sys_fstatfs64
404ENDPROC(sys_fstatfs64_wrapper)
405
406/*
407 * Note: off_4k (r5) is always units of 4K. If we can't do the requested
408 * offset, we return EINVAL.
409 */
410sys_mmap2:
411 str r5, [sp, #4]
412 b sys_mmap_pgoff
413ENDPROC(sys_mmap2)
414
415#ifdef CONFIG_OABI_COMPAT
416
417/*
418 * These are syscalls with argument register differences
419 */
420
421sys_oabi_pread64:
422 stmia sp, {r3, r4}
423 b sys_pread64
424ENDPROC(sys_oabi_pread64)
425
426sys_oabi_pwrite64:
427 stmia sp, {r3, r4}
428 b sys_pwrite64
429ENDPROC(sys_oabi_pwrite64)
430
431sys_oabi_truncate64:
432 mov r3, r2
433 mov r2, r1
434 b sys_truncate64
435ENDPROC(sys_oabi_truncate64)
436
437sys_oabi_ftruncate64:
438 mov r3, r2
439 mov r2, r1
440 b sys_ftruncate64
441ENDPROC(sys_oabi_ftruncate64)
442
443sys_oabi_readahead:
444 str r3, [sp]
445 mov r3, r2
446 mov r2, r1
447 b sys_readahead
448ENDPROC(sys_oabi_readahead)
449
450/*
451 * Let's declare a second syscall table for old ABI binaries
452 * using the compatibility syscall entries.
453 */
454 syscall_table_start sys_oabi_call_table
455#undef __SYSCALL_WITH_COMPAT
456#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, compat)
457#include <calls-oabi.S>
458 syscall_table_end sys_oabi_call_table
459
460#endif
461