Loading...
1/*
2 * linux/arch/arm/kernel/entry-common.S
3 *
4 * Copyright (C) 2000 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <asm/unistd.h>
12#include <asm/ftrace.h>
13#include <mach/entry-macro.S>
14#include <asm/unwind.h>
15
16#include "entry-header.S"
17
18
19 .align 5
20/*
21 * This is the fast syscall return path. We do as little as
22 * possible here, and this includes saving r0 back into the SVC
23 * stack.
24 */
25ret_fast_syscall:
26 UNWIND(.fnstart )
27 UNWIND(.cantunwind )
28 disable_irq @ disable interrupts
29 ldr r1, [tsk, #TI_FLAGS]
30 tst r1, #_TIF_WORK_MASK
31 bne fast_work_pending
32#if defined(CONFIG_IRQSOFF_TRACER)
33 asm_trace_hardirqs_on
34#endif
35
36 /* perform architecture specific actions before user return */
37 arch_ret_to_user r1, lr
38
39 restore_user_regs fast = 1, offset = S_OFF
40 UNWIND(.fnend )
41
42/*
43 * Ok, we need to do extra processing, enter the slow path.
44 */
45fast_work_pending:
46 str r0, [sp, #S_R0+S_OFF]! @ returned r0
47work_pending:
48 tst r1, #_TIF_NEED_RESCHED
49 bne work_resched
50 tst r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
51 beq no_work_pending
52 mov r0, sp @ 'regs'
53 mov r2, why @ 'syscall'
54 tst r1, #_TIF_SIGPENDING @ delivering a signal?
55 movne why, #0 @ prevent further restarts
56 bl do_notify_resume
57 b ret_slow_syscall @ Check work again
58
59work_resched:
60 bl schedule
61/*
62 * "slow" syscall return path. "why" tells us if this was a real syscall.
63 */
64ENTRY(ret_to_user)
65ret_slow_syscall:
66 disable_irq @ disable interrupts
67ENTRY(ret_to_user_from_irq)
68 ldr r1, [tsk, #TI_FLAGS]
69 tst r1, #_TIF_WORK_MASK
70 bne work_pending
71no_work_pending:
72#if defined(CONFIG_IRQSOFF_TRACER)
73 asm_trace_hardirqs_on
74#endif
75 /* perform architecture specific actions before user return */
76 arch_ret_to_user r1, lr
77
78 restore_user_regs fast = 0, offset = 0
79ENDPROC(ret_to_user_from_irq)
80ENDPROC(ret_to_user)
81
82/*
83 * This is how we return from a fork.
84 */
85ENTRY(ret_from_fork)
86 bl schedule_tail
87 get_thread_info tsk
88 ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing
89 mov why, #1
90 tst r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
91 beq ret_slow_syscall
92 mov r1, sp
93 mov r0, #1 @ trace exit [IP = 1]
94 bl syscall_trace
95 b ret_slow_syscall
96ENDPROC(ret_from_fork)
97
98 .equ NR_syscalls,0
99#define CALL(x) .equ NR_syscalls,NR_syscalls+1
100#include "calls.S"
101#undef CALL
102#define CALL(x) .long x
103
104#ifdef CONFIG_FUNCTION_TRACER
105/*
106 * When compiling with -pg, gcc inserts a call to the mcount routine at the
107 * start of every function. In mcount, apart from the function's address (in
108 * lr), we need to get hold of the function's caller's address.
109 *
110 * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this:
111 *
112 * bl mcount
113 *
114 * These versions have the limitation that in order for the mcount routine to
115 * be able to determine the function's caller's address, an APCS-style frame
116 * pointer (which is set up with something like the code below) is required.
117 *
118 * mov ip, sp
119 * push {fp, ip, lr, pc}
120 * sub fp, ip, #4
121 *
122 * With EABI, these frame pointers are not available unless -mapcs-frame is
123 * specified, and if building as Thumb-2, not even then.
124 *
125 * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount,
126 * with call sites like:
127 *
128 * push {lr}
129 * bl __gnu_mcount_nc
130 *
131 * With these compilers, frame pointers are not necessary.
132 *
133 * mcount can be thought of as a function called in the middle of a subroutine
134 * call. As such, it needs to be transparent for both the caller and the
135 * callee: the original lr needs to be restored when leaving mcount, and no
136 * registers should be clobbered. (In the __gnu_mcount_nc implementation, we
137 * clobber the ip register. This is OK because the ARM calling convention
138 * allows it to be clobbered in subroutines and doesn't use it to hold
139 * parameters.)
140 *
141 * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0"
142 * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see
143 * arch/arm/kernel/ftrace.c).
144 */
145
146#ifndef CONFIG_OLD_MCOUNT
147#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4))
148#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0.
149#endif
150#endif
151
152.macro __mcount suffix
153 mcount_enter
154 ldr r0, =ftrace_trace_function
155 ldr r2, [r0]
156 adr r0, .Lftrace_stub
157 cmp r0, r2
158 bne 1f
159
160#ifdef CONFIG_FUNCTION_GRAPH_TRACER
161 ldr r1, =ftrace_graph_return
162 ldr r2, [r1]
163 cmp r0, r2
164 bne ftrace_graph_caller\suffix
165
166 ldr r1, =ftrace_graph_entry
167 ldr r2, [r1]
168 ldr r0, =ftrace_graph_entry_stub
169 cmp r0, r2
170 bne ftrace_graph_caller\suffix
171#endif
172
173 mcount_exit
174
1751: mcount_get_lr r1 @ lr of instrumented func
176 mov r0, lr @ instrumented function
177 sub r0, r0, #MCOUNT_INSN_SIZE
178 adr lr, BSYM(2f)
179 mov pc, r2
1802: mcount_exit
181.endm
182
183.macro __ftrace_caller suffix
184 mcount_enter
185
186 mcount_get_lr r1 @ lr of instrumented func
187 mov r0, lr @ instrumented function
188 sub r0, r0, #MCOUNT_INSN_SIZE
189
190 .globl ftrace_call\suffix
191ftrace_call\suffix:
192 bl ftrace_stub
193
194#ifdef CONFIG_FUNCTION_GRAPH_TRACER
195 .globl ftrace_graph_call\suffix
196ftrace_graph_call\suffix:
197 mov r0, r0
198#endif
199
200 mcount_exit
201.endm
202
203.macro __ftrace_graph_caller
204 sub r0, fp, #4 @ &lr of instrumented routine (&parent)
205#ifdef CONFIG_DYNAMIC_FTRACE
206 @ called from __ftrace_caller, saved in mcount_enter
207 ldr r1, [sp, #16] @ instrumented routine (func)
208#else
209 @ called from __mcount, untouched in lr
210 mov r1, lr @ instrumented routine (func)
211#endif
212 sub r1, r1, #MCOUNT_INSN_SIZE
213 mov r2, fp @ frame pointer
214 bl prepare_ftrace_return
215 mcount_exit
216.endm
217
218#ifdef CONFIG_OLD_MCOUNT
219/*
220 * mcount
221 */
222
223.macro mcount_enter
224 stmdb sp!, {r0-r3, lr}
225.endm
226
227.macro mcount_get_lr reg
228 ldr \reg, [fp, #-4]
229.endm
230
231.macro mcount_exit
232 ldr lr, [fp, #-4]
233 ldmia sp!, {r0-r3, pc}
234.endm
235
236ENTRY(mcount)
237#ifdef CONFIG_DYNAMIC_FTRACE
238 stmdb sp!, {lr}
239 ldr lr, [fp, #-4]
240 ldmia sp!, {pc}
241#else
242 __mcount _old
243#endif
244ENDPROC(mcount)
245
246#ifdef CONFIG_DYNAMIC_FTRACE
247ENTRY(ftrace_caller_old)
248 __ftrace_caller _old
249ENDPROC(ftrace_caller_old)
250#endif
251
252#ifdef CONFIG_FUNCTION_GRAPH_TRACER
253ENTRY(ftrace_graph_caller_old)
254 __ftrace_graph_caller
255ENDPROC(ftrace_graph_caller_old)
256#endif
257
258.purgem mcount_enter
259.purgem mcount_get_lr
260.purgem mcount_exit
261#endif
262
263/*
264 * __gnu_mcount_nc
265 */
266
267.macro mcount_enter
268 stmdb sp!, {r0-r3, lr}
269.endm
270
271.macro mcount_get_lr reg
272 ldr \reg, [sp, #20]
273.endm
274
275.macro mcount_exit
276 ldmia sp!, {r0-r3, ip, lr}
277 mov pc, ip
278.endm
279
280ENTRY(__gnu_mcount_nc)
281#ifdef CONFIG_DYNAMIC_FTRACE
282 mov ip, lr
283 ldmia sp!, {lr}
284 mov pc, ip
285#else
286 __mcount
287#endif
288ENDPROC(__gnu_mcount_nc)
289
290#ifdef CONFIG_DYNAMIC_FTRACE
291ENTRY(ftrace_caller)
292 __ftrace_caller
293ENDPROC(ftrace_caller)
294#endif
295
296#ifdef CONFIG_FUNCTION_GRAPH_TRACER
297ENTRY(ftrace_graph_caller)
298 __ftrace_graph_caller
299ENDPROC(ftrace_graph_caller)
300#endif
301
302.purgem mcount_enter
303.purgem mcount_get_lr
304.purgem mcount_exit
305
306#ifdef CONFIG_FUNCTION_GRAPH_TRACER
307 .globl return_to_handler
308return_to_handler:
309 stmdb sp!, {r0-r3}
310 mov r0, fp @ frame pointer
311 bl ftrace_return_to_handler
312 mov lr, r0 @ r0 has real ret addr
313 ldmia sp!, {r0-r3}
314 mov pc, lr
315#endif
316
317ENTRY(ftrace_stub)
318.Lftrace_stub:
319 mov pc, lr
320ENDPROC(ftrace_stub)
321
322#endif /* CONFIG_FUNCTION_TRACER */
323
324/*=============================================================================
325 * SWI handler
326 *-----------------------------------------------------------------------------
327 */
328
329 /* If we're optimising for StrongARM the resulting code won't
330 run on an ARM7 and we can save a couple of instructions.
331 --pb */
332#ifdef CONFIG_CPU_ARM710
333#define A710(code...) code
334.Larm710bug:
335 ldmia sp, {r0 - lr}^ @ Get calling r0 - lr
336 mov r0, r0
337 add sp, sp, #S_FRAME_SIZE
338 subs pc, lr, #4
339#else
340#define A710(code...)
341#endif
342
343 .align 5
344ENTRY(vector_swi)
345 sub sp, sp, #S_FRAME_SIZE
346 stmia sp, {r0 - r12} @ Calling r0 - r12
347 ARM( add r8, sp, #S_PC )
348 ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr
349 THUMB( mov r8, sp )
350 THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr
351 mrs r8, spsr @ called from non-FIQ mode, so ok.
352 str lr, [sp, #S_PC] @ Save calling PC
353 str r8, [sp, #S_PSR] @ Save CPSR
354 str r0, [sp, #S_OLD_R0] @ Save OLD_R0
355 zero_fp
356
357 /*
358 * Get the system call number.
359 */
360
361#if defined(CONFIG_OABI_COMPAT)
362
363 /*
364 * If we have CONFIG_OABI_COMPAT then we need to look at the swi
365 * value to determine if it is an EABI or an old ABI call.
366 */
367#ifdef CONFIG_ARM_THUMB
368 tst r8, #PSR_T_BIT
369 movne r10, #0 @ no thumb OABI emulation
370 ldreq r10, [lr, #-4] @ get SWI instruction
371#else
372 ldr r10, [lr, #-4] @ get SWI instruction
373 A710( and ip, r10, #0x0f000000 @ check for SWI )
374 A710( teq ip, #0x0f000000 )
375 A710( bne .Larm710bug )
376#endif
377#ifdef CONFIG_CPU_ENDIAN_BE8
378 rev r10, r10 @ little endian instruction
379#endif
380
381#elif defined(CONFIG_AEABI)
382
383 /*
384 * Pure EABI user space always put syscall number into scno (r7).
385 */
386 A710( ldr ip, [lr, #-4] @ get SWI instruction )
387 A710( and ip, ip, #0x0f000000 @ check for SWI )
388 A710( teq ip, #0x0f000000 )
389 A710( bne .Larm710bug )
390
391#elif defined(CONFIG_ARM_THUMB)
392
393 /* Legacy ABI only, possibly thumb mode. */
394 tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
395 addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
396 ldreq scno, [lr, #-4]
397
398#else
399
400 /* Legacy ABI only. */
401 ldr scno, [lr, #-4] @ get SWI instruction
402 A710( and ip, scno, #0x0f000000 @ check for SWI )
403 A710( teq ip, #0x0f000000 )
404 A710( bne .Larm710bug )
405
406#endif
407
408#ifdef CONFIG_ALIGNMENT_TRAP
409 ldr ip, __cr_alignment
410 ldr ip, [ip]
411 mcr p15, 0, ip, c1, c0 @ update control register
412#endif
413 enable_irq
414
415 get_thread_info tsk
416 adr tbl, sys_call_table @ load syscall table pointer
417
418#if defined(CONFIG_OABI_COMPAT)
419 /*
420 * If the swi argument is zero, this is an EABI call and we do nothing.
421 *
422 * If this is an old ABI call, get the syscall number into scno and
423 * get the old ABI syscall table address.
424 */
425 bics r10, r10, #0xff000000
426 eorne scno, r10, #__NR_OABI_SYSCALL_BASE
427 ldrne tbl, =sys_oabi_call_table
428#elif !defined(CONFIG_AEABI)
429 bic scno, scno, #0xff000000 @ mask off SWI op-code
430 eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
431#endif
432
433 ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing
434 stmdb sp!, {r4, r5} @ push fifth and sixth args
435
436#ifdef CONFIG_SECCOMP
437 tst r10, #_TIF_SECCOMP
438 beq 1f
439 mov r0, scno
440 bl __secure_computing
441 add r0, sp, #S_R0 + S_OFF @ pointer to regs
442 ldmia r0, {r0 - r3} @ have to reload r0 - r3
4431:
444#endif
445
446 tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
447 bne __sys_trace
448
449 cmp scno, #NR_syscalls @ check upper syscall limit
450 adr lr, BSYM(ret_fast_syscall) @ return address
451 ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
452
453 add r1, sp, #S_OFF
4542: mov why, #0 @ no longer a real syscall
455 cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
456 eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
457 bcs arm_syscall
458 b sys_ni_syscall @ not private func
459ENDPROC(vector_swi)
460
461 /*
462 * This is the really slow path. We're going to be doing
463 * context switches, and waiting for our parent to respond.
464 */
465__sys_trace:
466 mov r2, scno
467 add r1, sp, #S_OFF
468 mov r0, #0 @ trace entry [IP = 0]
469 bl syscall_trace
470
471 adr lr, BSYM(__sys_trace_return) @ return address
472 mov scno, r0 @ syscall number (possibly new)
473 add r1, sp, #S_R0 + S_OFF @ pointer to regs
474 cmp scno, #NR_syscalls @ check upper syscall limit
475 ldmccia r1, {r0 - r3} @ have to reload r0 - r3
476 ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
477 b 2b
478
479__sys_trace_return:
480 str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
481 mov r2, scno
482 mov r1, sp
483 mov r0, #1 @ trace exit [IP = 1]
484 bl syscall_trace
485 b ret_slow_syscall
486
487 .align 5
488#ifdef CONFIG_ALIGNMENT_TRAP
489 .type __cr_alignment, #object
490__cr_alignment:
491 .word cr_alignment
492#endif
493 .ltorg
494
495/*
496 * This is the syscall table declaration for native ABI syscalls.
497 * With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
498 */
499#define ABI(native, compat) native
500#ifdef CONFIG_AEABI
501#define OBSOLETE(syscall) sys_ni_syscall
502#else
503#define OBSOLETE(syscall) syscall
504#endif
505
506 .type sys_call_table, #object
507ENTRY(sys_call_table)
508#include "calls.S"
509#undef ABI
510#undef OBSOLETE
511
512/*============================================================================
513 * Special system call wrappers
514 */
515@ r0 = syscall number
516@ r8 = syscall table
517sys_syscall:
518 bic scno, r0, #__NR_OABI_SYSCALL_BASE
519 cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
520 cmpne scno, #NR_syscalls @ check range
521 stmloia sp, {r5, r6} @ shuffle args
522 movlo r0, r1
523 movlo r1, r2
524 movlo r2, r3
525 movlo r3, r4
526 ldrlo pc, [tbl, scno, lsl #2]
527 b sys_ni_syscall
528ENDPROC(sys_syscall)
529
530sys_fork_wrapper:
531 add r0, sp, #S_OFF
532 b sys_fork
533ENDPROC(sys_fork_wrapper)
534
535sys_vfork_wrapper:
536 add r0, sp, #S_OFF
537 b sys_vfork
538ENDPROC(sys_vfork_wrapper)
539
540sys_execve_wrapper:
541 add r3, sp, #S_OFF
542 b sys_execve
543ENDPROC(sys_execve_wrapper)
544
545sys_clone_wrapper:
546 add ip, sp, #S_OFF
547 str ip, [sp, #4]
548 b sys_clone
549ENDPROC(sys_clone_wrapper)
550
551sys_sigreturn_wrapper:
552 add r0, sp, #S_OFF
553 mov why, #0 @ prevent syscall restart handling
554 b sys_sigreturn
555ENDPROC(sys_sigreturn_wrapper)
556
557sys_rt_sigreturn_wrapper:
558 add r0, sp, #S_OFF
559 mov why, #0 @ prevent syscall restart handling
560 b sys_rt_sigreturn
561ENDPROC(sys_rt_sigreturn_wrapper)
562
563sys_sigaltstack_wrapper:
564 ldr r2, [sp, #S_OFF + S_SP]
565 b do_sigaltstack
566ENDPROC(sys_sigaltstack_wrapper)
567
568sys_statfs64_wrapper:
569 teq r1, #88
570 moveq r1, #84
571 b sys_statfs64
572ENDPROC(sys_statfs64_wrapper)
573
574sys_fstatfs64_wrapper:
575 teq r1, #88
576 moveq r1, #84
577 b sys_fstatfs64
578ENDPROC(sys_fstatfs64_wrapper)
579
580/*
581 * Note: off_4k (r5) is always units of 4K. If we can't do the requested
582 * offset, we return EINVAL.
583 */
584sys_mmap2:
585#if PAGE_SHIFT > 12
586 tst r5, #PGOFF_MASK
587 moveq r5, r5, lsr #PAGE_SHIFT - 12
588 streq r5, [sp, #4]
589 beq sys_mmap_pgoff
590 mov r0, #-EINVAL
591 mov pc, lr
592#else
593 str r5, [sp, #4]
594 b sys_mmap_pgoff
595#endif
596ENDPROC(sys_mmap2)
597
598#ifdef CONFIG_OABI_COMPAT
599
600/*
601 * These are syscalls with argument register differences
602 */
603
604sys_oabi_pread64:
605 stmia sp, {r3, r4}
606 b sys_pread64
607ENDPROC(sys_oabi_pread64)
608
609sys_oabi_pwrite64:
610 stmia sp, {r3, r4}
611 b sys_pwrite64
612ENDPROC(sys_oabi_pwrite64)
613
614sys_oabi_truncate64:
615 mov r3, r2
616 mov r2, r1
617 b sys_truncate64
618ENDPROC(sys_oabi_truncate64)
619
620sys_oabi_ftruncate64:
621 mov r3, r2
622 mov r2, r1
623 b sys_ftruncate64
624ENDPROC(sys_oabi_ftruncate64)
625
626sys_oabi_readahead:
627 str r3, [sp]
628 mov r3, r2
629 mov r2, r1
630 b sys_readahead
631ENDPROC(sys_oabi_readahead)
632
633/*
634 * Let's declare a second syscall table for old ABI binaries
635 * using the compatibility syscall entries.
636 */
637#define ABI(native, compat) compat
638#define OBSOLETE(syscall) syscall
639
640 .type sys_oabi_call_table, #object
641ENTRY(sys_oabi_call_table)
642#include "calls.S"
643#undef ABI
644#undef OBSOLETE
645
646#endif
647
1/*
2 * linux/arch/arm/kernel/entry-common.S
3 *
4 * Copyright (C) 2000 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <asm/assembler.h>
12#include <asm/unistd.h>
13#include <asm/ftrace.h>
14#include <asm/unwind.h>
15#include <asm/memory.h>
16#ifdef CONFIG_AEABI
17#include <asm/unistd-oabi.h>
18#endif
19
20 .equ NR_syscalls, __NR_syscalls
21
22#ifdef CONFIG_NEED_RET_TO_USER
23#include <mach/entry-macro.S>
24#else
25 .macro arch_ret_to_user, tmp1, tmp2
26 .endm
27#endif
28
29#include "entry-header.S"
30
31saved_psr .req r8
32#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING)
33saved_pc .req r9
34#define TRACE(x...) x
35#else
36saved_pc .req lr
37#define TRACE(x...)
38#endif
39
40 .section .entry.text,"ax",%progbits
41 .align 5
42#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING))
43/*
44 * This is the fast syscall return path. We do as little as possible here,
45 * such as avoiding writing r0 to the stack. We only use this path if we
46 * have tracing and context tracking disabled - the overheads from those
47 * features make this path too inefficient.
48 */
49ret_fast_syscall:
50 UNWIND(.fnstart )
51 UNWIND(.cantunwind )
52 disable_irq_notrace @ disable interrupts
53 ldr r2, [tsk, #TI_ADDR_LIMIT]
54 cmp r2, #TASK_SIZE
55 blne addr_limit_check_failed
56 ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
57 tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
58 bne fast_work_pending
59
60
61 /* perform architecture specific actions before user return */
62 arch_ret_to_user r1, lr
63
64 restore_user_regs fast = 1, offset = S_OFF
65 UNWIND(.fnend )
66ENDPROC(ret_fast_syscall)
67
68 /* Ok, we need to do extra processing, enter the slow path. */
69fast_work_pending:
70 str r0, [sp, #S_R0+S_OFF]! @ returned r0
71 /* fall through to work_pending */
72#else
73/*
74 * The "replacement" ret_fast_syscall for when tracing or context tracking
75 * is enabled. As we will need to call out to some C functions, we save
76 * r0 first to avoid needing to save registers around each C function call.
77 */
78ret_fast_syscall:
79 UNWIND(.fnstart )
80 UNWIND(.cantunwind )
81 str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
82 disable_irq_notrace @ disable interrupts
83 ldr r2, [tsk, #TI_ADDR_LIMIT]
84 cmp r2, #TASK_SIZE
85 blne addr_limit_check_failed
86 ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
87 tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
88 beq no_work_pending
89 UNWIND(.fnend )
90ENDPROC(ret_fast_syscall)
91
92 /* Slower path - fall through to work_pending */
93#endif
94
95 tst r1, #_TIF_SYSCALL_WORK
96 bne __sys_trace_return_nosave
97slow_work_pending:
98 mov r0, sp @ 'regs'
99 mov r2, why @ 'syscall'
100 bl do_work_pending
101 cmp r0, #0
102 beq no_work_pending
103 movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE)
104 ldmia sp, {r0 - r6} @ have to reload r0 - r6
105 b local_restart @ ... and off we go
106ENDPROC(ret_fast_syscall)
107
108/*
109 * "slow" syscall return path. "why" tells us if this was a real syscall.
110 * IRQs may be enabled here, so always disable them. Note that we use the
111 * "notrace" version to avoid calling into the tracing code unnecessarily.
112 * do_work_pending() will update this state if necessary.
113 */
114ENTRY(ret_to_user)
115ret_slow_syscall:
116 disable_irq_notrace @ disable interrupts
117ENTRY(ret_to_user_from_irq)
118 ldr r2, [tsk, #TI_ADDR_LIMIT]
119 cmp r2, #TASK_SIZE
120 blne addr_limit_check_failed
121 ldr r1, [tsk, #TI_FLAGS]
122 tst r1, #_TIF_WORK_MASK
123 bne slow_work_pending
124no_work_pending:
125 asm_trace_hardirqs_on save = 0
126
127 /* perform architecture specific actions before user return */
128 arch_ret_to_user r1, lr
129 ct_user_enter save = 0
130
131 restore_user_regs fast = 0, offset = 0
132ENDPROC(ret_to_user_from_irq)
133ENDPROC(ret_to_user)
134
135/*
136 * This is how we return from a fork.
137 */
138ENTRY(ret_from_fork)
139 bl schedule_tail
140 cmp r5, #0
141 movne r0, r4
142 badrne lr, 1f
143 retne r5
1441: get_thread_info tsk
145 b ret_slow_syscall
146ENDPROC(ret_from_fork)
147
148/*=============================================================================
149 * SWI handler
150 *-----------------------------------------------------------------------------
151 */
152
153 .align 5
154ENTRY(vector_swi)
155#ifdef CONFIG_CPU_V7M
156 v7m_exception_entry
157#else
158 sub sp, sp, #PT_REGS_SIZE
159 stmia sp, {r0 - r12} @ Calling r0 - r12
160 ARM( add r8, sp, #S_PC )
161 ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr
162 THUMB( mov r8, sp )
163 THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr
164 mrs saved_psr, spsr @ called from non-FIQ mode, so ok.
165 TRACE( mov saved_pc, lr )
166 str saved_pc, [sp, #S_PC] @ Save calling PC
167 str saved_psr, [sp, #S_PSR] @ Save CPSR
168 str r0, [sp, #S_OLD_R0] @ Save OLD_R0
169#endif
170 zero_fp
171 alignment_trap r10, ip, __cr_alignment
172 asm_trace_hardirqs_on save=0
173 enable_irq_notrace
174 ct_user_exit save=0
175
176 /*
177 * Get the system call number.
178 */
179
180#if defined(CONFIG_OABI_COMPAT)
181
182 /*
183 * If we have CONFIG_OABI_COMPAT then we need to look at the swi
184 * value to determine if it is an EABI or an old ABI call.
185 */
186#ifdef CONFIG_ARM_THUMB
187 tst saved_psr, #PSR_T_BIT
188 movne r10, #0 @ no thumb OABI emulation
189 USER( ldreq r10, [saved_pc, #-4] ) @ get SWI instruction
190#else
191 USER( ldr r10, [saved_pc, #-4] ) @ get SWI instruction
192#endif
193 ARM_BE8(rev r10, r10) @ little endian instruction
194
195#elif defined(CONFIG_AEABI)
196
197 /*
198 * Pure EABI user space always put syscall number into scno (r7).
199 */
200#elif defined(CONFIG_ARM_THUMB)
201 /* Legacy ABI only, possibly thumb mode. */
202 tst saved_psr, #PSR_T_BIT @ this is SPSR from save_user_regs
203 addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
204 USER( ldreq scno, [saved_pc, #-4] )
205
206#else
207 /* Legacy ABI only. */
208 USER( ldr scno, [saved_pc, #-4] ) @ get SWI instruction
209#endif
210
211 /* saved_psr and saved_pc are now dead */
212
213 uaccess_disable tbl
214
215 adr tbl, sys_call_table @ load syscall table pointer
216
217#if defined(CONFIG_OABI_COMPAT)
218 /*
219 * If the swi argument is zero, this is an EABI call and we do nothing.
220 *
221 * If this is an old ABI call, get the syscall number into scno and
222 * get the old ABI syscall table address.
223 */
224 bics r10, r10, #0xff000000
225 eorne scno, r10, #__NR_OABI_SYSCALL_BASE
226 ldrne tbl, =sys_oabi_call_table
227#elif !defined(CONFIG_AEABI)
228 bic scno, scno, #0xff000000 @ mask off SWI op-code
229 eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
230#endif
231 get_thread_info tsk
232 /*
233 * Reload the registers that may have been corrupted on entry to
234 * the syscall assembly (by tracing or context tracking.)
235 */
236 TRACE( ldmia sp, {r0 - r3} )
237
238local_restart:
239 ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing
240 stmdb sp!, {r4, r5} @ push fifth and sixth args
241
242 tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls?
243 bne __sys_trace
244
245 cmp scno, #NR_syscalls @ check upper syscall limit
246 badr lr, ret_fast_syscall @ return address
247 ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
248
249 add r1, sp, #S_OFF
2502: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
251 eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
252 bcs arm_syscall
253 mov why, #0 @ no longer a real syscall
254 b sys_ni_syscall @ not private func
255
256#if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
257 /*
258 * We failed to handle a fault trying to access the page
259 * containing the swi instruction, but we're not really in a
260 * position to return -EFAULT. Instead, return back to the
261 * instruction and re-enter the user fault handling path trying
262 * to page it in. This will likely result in sending SEGV to the
263 * current task.
264 */
2659001:
266 sub lr, saved_pc, #4
267 str lr, [sp, #S_PC]
268 get_thread_info tsk
269 b ret_fast_syscall
270#endif
271ENDPROC(vector_swi)
272
273 /*
274 * This is the really slow path. We're going to be doing
275 * context switches, and waiting for our parent to respond.
276 */
277__sys_trace:
278 mov r1, scno
279 add r0, sp, #S_OFF
280 bl syscall_trace_enter
281
282 badr lr, __sys_trace_return @ return address
283 mov scno, r0 @ syscall number (possibly new)
284 add r1, sp, #S_R0 + S_OFF @ pointer to regs
285 cmp scno, #NR_syscalls @ check upper syscall limit
286 ldmccia r1, {r0 - r6} @ have to reload r0 - r6
287 stmccia sp, {r4, r5} @ and update the stack args
288 ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
289 cmp scno, #-1 @ skip the syscall?
290 bne 2b
291 add sp, sp, #S_OFF @ restore stack
292 b ret_slow_syscall
293
294__sys_trace_return:
295 str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
296 mov r0, sp
297 bl syscall_trace_exit
298 b ret_slow_syscall
299
300__sys_trace_return_nosave:
301 enable_irq_notrace
302 mov r0, sp
303 bl syscall_trace_exit
304 b ret_slow_syscall
305
306 .align 5
307#ifdef CONFIG_ALIGNMENT_TRAP
308 .type __cr_alignment, #object
309__cr_alignment:
310 .word cr_alignment
311#endif
312 .ltorg
313
314 .macro syscall_table_start, sym
315 .equ __sys_nr, 0
316 .type \sym, #object
317ENTRY(\sym)
318 .endm
319
320 .macro syscall, nr, func
321 .ifgt __sys_nr - \nr
322 .error "Duplicated/unorded system call entry"
323 .endif
324 .rept \nr - __sys_nr
325 .long sys_ni_syscall
326 .endr
327 .long \func
328 .equ __sys_nr, \nr + 1
329 .endm
330
331 .macro syscall_table_end, sym
332 .ifgt __sys_nr - __NR_syscalls
333 .error "System call table too big"
334 .endif
335 .rept __NR_syscalls - __sys_nr
336 .long sys_ni_syscall
337 .endr
338 .size \sym, . - \sym
339 .endm
340
341#define NATIVE(nr, func) syscall nr, func
342
343/*
344 * This is the syscall table declaration for native ABI syscalls.
345 * With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
346 */
347 syscall_table_start sys_call_table
348#define COMPAT(nr, native, compat) syscall nr, native
349#ifdef CONFIG_AEABI
350#include <calls-eabi.S>
351#else
352#include <calls-oabi.S>
353#endif
354#undef COMPAT
355 syscall_table_end sys_call_table
356
357/*============================================================================
358 * Special system call wrappers
359 */
360@ r0 = syscall number
361@ r8 = syscall table
362sys_syscall:
363 bic scno, r0, #__NR_OABI_SYSCALL_BASE
364 cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
365 cmpne scno, #NR_syscalls @ check range
366 stmloia sp, {r5, r6} @ shuffle args
367 movlo r0, r1
368 movlo r1, r2
369 movlo r2, r3
370 movlo r3, r4
371 ldrlo pc, [tbl, scno, lsl #2]
372 b sys_ni_syscall
373ENDPROC(sys_syscall)
374
375sys_sigreturn_wrapper:
376 add r0, sp, #S_OFF
377 mov why, #0 @ prevent syscall restart handling
378 b sys_sigreturn
379ENDPROC(sys_sigreturn_wrapper)
380
381sys_rt_sigreturn_wrapper:
382 add r0, sp, #S_OFF
383 mov why, #0 @ prevent syscall restart handling
384 b sys_rt_sigreturn
385ENDPROC(sys_rt_sigreturn_wrapper)
386
387sys_statfs64_wrapper:
388 teq r1, #88
389 moveq r1, #84
390 b sys_statfs64
391ENDPROC(sys_statfs64_wrapper)
392
393sys_fstatfs64_wrapper:
394 teq r1, #88
395 moveq r1, #84
396 b sys_fstatfs64
397ENDPROC(sys_fstatfs64_wrapper)
398
399/*
400 * Note: off_4k (r5) is always units of 4K. If we can't do the requested
401 * offset, we return EINVAL.
402 */
403sys_mmap2:
404 str r5, [sp, #4]
405 b sys_mmap_pgoff
406ENDPROC(sys_mmap2)
407
408#ifdef CONFIG_OABI_COMPAT
409
410/*
411 * These are syscalls with argument register differences
412 */
413
414sys_oabi_pread64:
415 stmia sp, {r3, r4}
416 b sys_pread64
417ENDPROC(sys_oabi_pread64)
418
419sys_oabi_pwrite64:
420 stmia sp, {r3, r4}
421 b sys_pwrite64
422ENDPROC(sys_oabi_pwrite64)
423
424sys_oabi_truncate64:
425 mov r3, r2
426 mov r2, r1
427 b sys_truncate64
428ENDPROC(sys_oabi_truncate64)
429
430sys_oabi_ftruncate64:
431 mov r3, r2
432 mov r2, r1
433 b sys_ftruncate64
434ENDPROC(sys_oabi_ftruncate64)
435
436sys_oabi_readahead:
437 str r3, [sp]
438 mov r3, r2
439 mov r2, r1
440 b sys_readahead
441ENDPROC(sys_oabi_readahead)
442
443/*
444 * Let's declare a second syscall table for old ABI binaries
445 * using the compatibility syscall entries.
446 */
447 syscall_table_start sys_oabi_call_table
448#define COMPAT(nr, native, compat) syscall nr, compat
449#include <calls-oabi.S>
450 syscall_table_end sys_oabi_call_table
451
452#endif
453