Loading...
1/*
2 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
3 file Documentation/scsi/st.txt for more information.
4
5 History:
6 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
7 Contribution and ideas from several people including (in alphabetical
8 order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk,
9 Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
10 Michael Schaefer, J"org Weule, and Eric Youngdale.
11
12 Copyright 1992 - 2010 Kai Makisara
13 email Kai.Makisara@kolumbus.fi
14
15 Some small formal changes - aeb, 950809
16
17 Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
18 */
19
20static const char *verstr = "20101219";
21
22#include <linux/module.h>
23
24#include <linux/fs.h>
25#include <linux/kernel.h>
26#include <linux/sched.h>
27#include <linux/mm.h>
28#include <linux/init.h>
29#include <linux/string.h>
30#include <linux/slab.h>
31#include <linux/errno.h>
32#include <linux/mtio.h>
33#include <linux/cdrom.h>
34#include <linux/ioctl.h>
35#include <linux/fcntl.h>
36#include <linux/spinlock.h>
37#include <linux/blkdev.h>
38#include <linux/moduleparam.h>
39#include <linux/cdev.h>
40#include <linux/delay.h>
41#include <linux/mutex.h>
42
43#include <asm/uaccess.h>
44#include <asm/dma.h>
45#include <asm/system.h>
46
47#include <scsi/scsi.h>
48#include <scsi/scsi_dbg.h>
49#include <scsi/scsi_device.h>
50#include <scsi/scsi_driver.h>
51#include <scsi/scsi_eh.h>
52#include <scsi/scsi_host.h>
53#include <scsi/scsi_ioctl.h>
54#include <scsi/sg.h>
55
56
57/* The driver prints some debugging information on the console if DEBUG
58 is defined and non-zero. */
59#define DEBUG 0
60
61#if DEBUG
62/* The message level for the debug messages is currently set to KERN_NOTICE
63 so that people can easily see the messages. Later when the debugging messages
64 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
65#define ST_DEB_MSG KERN_NOTICE
66#define DEB(a) a
67#define DEBC(a) if (debugging) { a ; }
68#else
69#define DEB(a)
70#define DEBC(a)
71#endif
72
73#define ST_KILOBYTE 1024
74
75#include "st_options.h"
76#include "st.h"
77
78static DEFINE_MUTEX(st_mutex);
79static int buffer_kbs;
80static int max_sg_segs;
81static int try_direct_io = TRY_DIRECT_IO;
82static int try_rdio = 1;
83static int try_wdio = 1;
84
85static int st_dev_max;
86static int st_nr_dev;
87
88static struct class *st_sysfs_class;
89
90MODULE_AUTHOR("Kai Makisara");
91MODULE_DESCRIPTION("SCSI tape (st) driver");
92MODULE_LICENSE("GPL");
93MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
94MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
95
96/* Set 'perm' (4th argument) to 0 to disable module_param's definition
97 * of sysfs parameters (which module_param doesn't yet support).
98 * Sysfs parameters defined explicitly later.
99 */
100module_param_named(buffer_kbs, buffer_kbs, int, 0);
101MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)");
102module_param_named(max_sg_segs, max_sg_segs, int, 0);
103MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
104module_param_named(try_direct_io, try_direct_io, int, 0);
105MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
106
107/* Extra parameters for testing */
108module_param_named(try_rdio, try_rdio, int, 0);
109MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible");
110module_param_named(try_wdio, try_wdio, int, 0);
111MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible");
112
113#ifndef MODULE
114static int write_threshold_kbs; /* retained for compatibility */
115static struct st_dev_parm {
116 char *name;
117 int *val;
118} parms[] __initdata = {
119 {
120 "buffer_kbs", &buffer_kbs
121 },
122 { /* Retained for compatibility with 2.4 */
123 "write_threshold_kbs", &write_threshold_kbs
124 },
125 {
126 "max_sg_segs", NULL
127 },
128 {
129 "try_direct_io", &try_direct_io
130 }
131};
132#endif
133
134/* Restrict the number of modes so that names for all are assigned */
135#if ST_NBR_MODES > 16
136#error "Maximum number of modes is 16"
137#endif
138/* Bit reversed order to get same names for same minors with all
139 mode counts */
140static const char *st_formats[] = {
141 "", "r", "k", "s", "l", "t", "o", "u",
142 "m", "v", "p", "x", "a", "y", "q", "z"};
143
144/* The default definitions have been moved to st_options.h */
145
146#define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE)
147
148/* The buffer size should fit into the 24 bits for length in the
149 6-byte SCSI read and write commands. */
150#if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1)
151#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
152#endif
153
154static int debugging = DEBUG;
155
156#define MAX_RETRIES 0
157#define MAX_WRITE_RETRIES 0
158#define MAX_READY_RETRIES 0
159#define NO_TAPE NOT_READY
160
161#define ST_TIMEOUT (900 * HZ)
162#define ST_LONG_TIMEOUT (14000 * HZ)
163
164/* Remove mode bits and auto-rewind bit (7) */
165#define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \
166 (iminor(x) & ~(-1 << ST_MODE_SHIFT)) )
167#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
168
169/* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */
170#define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \
171 (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) )
172
173/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
174 24 bits) */
175#define SET_DENS_AND_BLK 0x10001
176
177static DEFINE_RWLOCK(st_dev_arr_lock);
178
179static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE;
180static int st_max_sg_segs = ST_MAX_SG;
181
182static struct scsi_tape **scsi_tapes = NULL;
183
184static int modes_defined;
185
186static int enlarge_buffer(struct st_buffer *, int, int);
187static void clear_buffer(struct st_buffer *);
188static void normalize_buffer(struct st_buffer *);
189static int append_to_buffer(const char __user *, struct st_buffer *, int);
190static int from_buffer(struct st_buffer *, char __user *, int);
191static void move_buffer_data(struct st_buffer *, int);
192
193static int sgl_map_user_pages(struct st_buffer *, const unsigned int,
194 unsigned long, size_t, int);
195static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int);
196
197static int st_probe(struct device *);
198static int st_remove(struct device *);
199
200static int do_create_sysfs_files(void);
201static void do_remove_sysfs_files(void);
202static int do_create_class_files(struct scsi_tape *, int, int);
203
204static struct scsi_driver st_template = {
205 .owner = THIS_MODULE,
206 .gendrv = {
207 .name = "st",
208 .probe = st_probe,
209 .remove = st_remove,
210 },
211};
212
213static int st_compression(struct scsi_tape *, int);
214
215static int find_partition(struct scsi_tape *);
216static int switch_partition(struct scsi_tape *);
217
218static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long);
219
220static void scsi_tape_release(struct kref *);
221
222#define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
223
224static DEFINE_MUTEX(st_ref_mutex);
225
226
227#include "osst_detect.h"
228#ifndef SIGS_FROM_OSST
229#define SIGS_FROM_OSST \
230 {"OnStream", "SC-", "", "osst"}, \
231 {"OnStream", "DI-", "", "osst"}, \
232 {"OnStream", "DP-", "", "osst"}, \
233 {"OnStream", "USB", "", "osst"}, \
234 {"OnStream", "FW-", "", "osst"}
235#endif
236
237static struct scsi_tape *scsi_tape_get(int dev)
238{
239 struct scsi_tape *STp = NULL;
240
241 mutex_lock(&st_ref_mutex);
242 write_lock(&st_dev_arr_lock);
243
244 if (dev < st_dev_max && scsi_tapes != NULL)
245 STp = scsi_tapes[dev];
246 if (!STp) goto out;
247
248 kref_get(&STp->kref);
249
250 if (!STp->device)
251 goto out_put;
252
253 if (scsi_device_get(STp->device))
254 goto out_put;
255
256 goto out;
257
258out_put:
259 kref_put(&STp->kref, scsi_tape_release);
260 STp = NULL;
261out:
262 write_unlock(&st_dev_arr_lock);
263 mutex_unlock(&st_ref_mutex);
264 return STp;
265}
266
267static void scsi_tape_put(struct scsi_tape *STp)
268{
269 struct scsi_device *sdev = STp->device;
270
271 mutex_lock(&st_ref_mutex);
272 kref_put(&STp->kref, scsi_tape_release);
273 scsi_device_put(sdev);
274 mutex_unlock(&st_ref_mutex);
275}
276
277struct st_reject_data {
278 char *vendor;
279 char *model;
280 char *rev;
281 char *driver_hint; /* Name of the correct driver, NULL if unknown */
282};
283
284static struct st_reject_data reject_list[] = {
285 /* {"XXX", "Yy-", "", NULL}, example */
286 SIGS_FROM_OSST,
287 {NULL, }};
288
289/* If the device signature is on the list of incompatible drives, the
290 function returns a pointer to the name of the correct driver (if known) */
291static char * st_incompatible(struct scsi_device* SDp)
292{
293 struct st_reject_data *rp;
294
295 for (rp=&(reject_list[0]); rp->vendor != NULL; rp++)
296 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
297 !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
298 !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) {
299 if (rp->driver_hint)
300 return rp->driver_hint;
301 else
302 return "unknown";
303 }
304 return NULL;
305}
306
307
308static inline char *tape_name(struct scsi_tape *tape)
309{
310 return tape->disk->disk_name;
311}
312
313
314static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s)
315{
316 const u8 *ucp;
317 const u8 *sense = SRpnt->sense;
318
319 s->have_sense = scsi_normalize_sense(SRpnt->sense,
320 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
321 s->flags = 0;
322
323 if (s->have_sense) {
324 s->deferred = 0;
325 s->remainder_valid =
326 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
327 switch (sense[0] & 0x7f) {
328 case 0x71:
329 s->deferred = 1;
330 case 0x70:
331 s->fixed_format = 1;
332 s->flags = sense[2] & 0xe0;
333 break;
334 case 0x73:
335 s->deferred = 1;
336 case 0x72:
337 s->fixed_format = 0;
338 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
339 s->flags = ucp ? (ucp[3] & 0xe0) : 0;
340 break;
341 }
342 }
343}
344
345
346/* Convert the result to success code */
347static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
348{
349 int result = SRpnt->result;
350 u8 scode;
351 DEB(const char *stp;)
352 char *name = tape_name(STp);
353 struct st_cmdstatus *cmdstatp;
354
355 if (!result)
356 return 0;
357
358 cmdstatp = &STp->buffer->cmdstat;
359 st_analyze_sense(SRpnt, cmdstatp);
360
361 if (cmdstatp->have_sense)
362 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
363 else
364 scode = 0;
365
366 DEB(
367 if (debugging) {
368 printk(ST_DEB_MSG "%s: Error: %x, cmd: %x %x %x %x %x %x\n",
369 name, result,
370 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
371 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
372 if (cmdstatp->have_sense)
373 __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
374 } ) /* end DEB */
375 if (!debugging) { /* Abnormal conditions for tape */
376 if (!cmdstatp->have_sense)
377 printk(KERN_WARNING
378 "%s: Error %x (driver bt 0x%x, host bt 0x%x).\n",
379 name, result, driver_byte(result),
380 host_byte(result));
381 else if (cmdstatp->have_sense &&
382 scode != NO_SENSE &&
383 scode != RECOVERED_ERROR &&
384 /* scode != UNIT_ATTENTION && */
385 scode != BLANK_CHECK &&
386 scode != VOLUME_OVERFLOW &&
387 SRpnt->cmd[0] != MODE_SENSE &&
388 SRpnt->cmd[0] != TEST_UNIT_READY) {
389
390 __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
391 }
392 }
393
394 if (cmdstatp->fixed_format &&
395 STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */
396 if (STp->cln_sense_value)
397 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
398 STp->cln_sense_mask) == STp->cln_sense_value);
399 else
400 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
401 STp->cln_sense_mask) != 0);
402 }
403 if (cmdstatp->have_sense &&
404 cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17)
405 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */
406
407 STp->pos_unknown |= STp->device->was_reset;
408
409 if (cmdstatp->have_sense &&
410 scode == RECOVERED_ERROR
411#if ST_RECOVERED_WRITE_FATAL
412 && SRpnt->cmd[0] != WRITE_6
413 && SRpnt->cmd[0] != WRITE_FILEMARKS
414#endif
415 ) {
416 STp->recover_count++;
417 STp->recover_reg++;
418
419 DEB(
420 if (debugging) {
421 if (SRpnt->cmd[0] == READ_6)
422 stp = "read";
423 else if (SRpnt->cmd[0] == WRITE_6)
424 stp = "write";
425 else
426 stp = "ioctl";
427 printk(ST_DEB_MSG "%s: Recovered %s error (%d).\n", name, stp,
428 STp->recover_count);
429 } ) /* end DEB */
430
431 if (cmdstatp->flags == 0)
432 return 0;
433 }
434 return (-EIO);
435}
436
437static struct st_request *st_allocate_request(struct scsi_tape *stp)
438{
439 struct st_request *streq;
440
441 streq = kzalloc(sizeof(*streq), GFP_KERNEL);
442 if (streq)
443 streq->stp = stp;
444 else {
445 DEBC(printk(KERN_ERR "%s: Can't get SCSI request.\n",
446 tape_name(stp)););
447 if (signal_pending(current))
448 stp->buffer->syscall_result = -EINTR;
449 else
450 stp->buffer->syscall_result = -EBUSY;
451 }
452
453 return streq;
454}
455
456static void st_release_request(struct st_request *streq)
457{
458 kfree(streq);
459}
460
461static void st_scsi_execute_end(struct request *req, int uptodate)
462{
463 struct st_request *SRpnt = req->end_io_data;
464 struct scsi_tape *STp = SRpnt->stp;
465
466 STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
467 STp->buffer->cmdstat.residual = req->resid_len;
468
469 if (SRpnt->waiting)
470 complete(SRpnt->waiting);
471
472 blk_rq_unmap_user(SRpnt->bio);
473 __blk_put_request(req->q, req);
474}
475
476static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd,
477 int data_direction, void *buffer, unsigned bufflen,
478 int timeout, int retries)
479{
480 struct request *req;
481 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
482 int err = 0;
483 int write = (data_direction == DMA_TO_DEVICE);
484
485 req = blk_get_request(SRpnt->stp->device->request_queue, write,
486 GFP_KERNEL);
487 if (!req)
488 return DRIVER_ERROR << 24;
489
490 req->cmd_type = REQ_TYPE_BLOCK_PC;
491 req->cmd_flags |= REQ_QUIET;
492
493 mdata->null_mapped = 1;
494
495 if (bufflen) {
496 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen,
497 GFP_KERNEL);
498 if (err) {
499 blk_put_request(req);
500 return DRIVER_ERROR << 24;
501 }
502 }
503
504 SRpnt->bio = req->bio;
505 req->cmd_len = COMMAND_SIZE(cmd[0]);
506 memset(req->cmd, 0, BLK_MAX_CDB);
507 memcpy(req->cmd, cmd, req->cmd_len);
508 req->sense = SRpnt->sense;
509 req->sense_len = 0;
510 req->timeout = timeout;
511 req->retries = retries;
512 req->end_io_data = SRpnt;
513
514 blk_execute_rq_nowait(req->q, NULL, req, 1, st_scsi_execute_end);
515 return 0;
516}
517
518/* Do the scsi command. Waits until command performed if do_wait is true.
519 Otherwise write_behind_check() is used to check that the command
520 has finished. */
521static struct st_request *
522st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd,
523 int bytes, int direction, int timeout, int retries, int do_wait)
524{
525 struct completion *waiting;
526 struct rq_map_data *mdata = &STp->buffer->map_data;
527 int ret;
528
529 /* if async, make sure there's no command outstanding */
530 if (!do_wait && ((STp->buffer)->last_SRpnt)) {
531 printk(KERN_ERR "%s: Async command already active.\n",
532 tape_name(STp));
533 if (signal_pending(current))
534 (STp->buffer)->syscall_result = (-EINTR);
535 else
536 (STp->buffer)->syscall_result = (-EBUSY);
537 return NULL;
538 }
539
540 if (!SRpnt) {
541 SRpnt = st_allocate_request(STp);
542 if (!SRpnt)
543 return NULL;
544 }
545
546 /* If async IO, set last_SRpnt. This ptr tells write_behind_check
547 which IO is outstanding. It's nulled out when the IO completes. */
548 if (!do_wait)
549 (STp->buffer)->last_SRpnt = SRpnt;
550
551 waiting = &STp->wait;
552 init_completion(waiting);
553 SRpnt->waiting = waiting;
554
555 if (STp->buffer->do_dio) {
556 mdata->page_order = 0;
557 mdata->nr_entries = STp->buffer->sg_segs;
558 mdata->pages = STp->buffer->mapped_pages;
559 } else {
560 mdata->page_order = STp->buffer->reserved_page_order;
561 mdata->nr_entries =
562 DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
563 mdata->pages = STp->buffer->reserved_pages;
564 mdata->offset = 0;
565 }
566
567 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
568 STp->buffer->cmdstat.have_sense = 0;
569 STp->buffer->syscall_result = 0;
570
571 ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout,
572 retries);
573 if (ret) {
574 /* could not allocate the buffer or request was too large */
575 (STp->buffer)->syscall_result = (-EBUSY);
576 (STp->buffer)->last_SRpnt = NULL;
577 } else if (do_wait) {
578 wait_for_completion(waiting);
579 SRpnt->waiting = NULL;
580 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
581 }
582
583 return SRpnt;
584}
585
586
587/* Handle the write-behind checking (waits for completion). Returns -ENOSPC if
588 write has been correct but EOM early warning reached, -EIO if write ended in
589 error or zero if write successful. Asynchronous writes are used only in
590 variable block mode. */
591static int write_behind_check(struct scsi_tape * STp)
592{
593 int retval = 0;
594 struct st_buffer *STbuffer;
595 struct st_partstat *STps;
596 struct st_cmdstatus *cmdstatp;
597 struct st_request *SRpnt;
598
599 STbuffer = STp->buffer;
600 if (!STbuffer->writing)
601 return 0;
602
603 DEB(
604 if (STp->write_pending)
605 STp->nbr_waits++;
606 else
607 STp->nbr_finished++;
608 ) /* end DEB */
609
610 wait_for_completion(&(STp->wait));
611 SRpnt = STbuffer->last_SRpnt;
612 STbuffer->last_SRpnt = NULL;
613 SRpnt->waiting = NULL;
614
615 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
616 st_release_request(SRpnt);
617
618 STbuffer->buffer_bytes -= STbuffer->writing;
619 STps = &(STp->ps[STp->partition]);
620 if (STps->drv_block >= 0) {
621 if (STp->block_size == 0)
622 STps->drv_block++;
623 else
624 STps->drv_block += STbuffer->writing / STp->block_size;
625 }
626
627 cmdstatp = &STbuffer->cmdstat;
628 if (STbuffer->syscall_result) {
629 retval = -EIO;
630 if (cmdstatp->have_sense && !cmdstatp->deferred &&
631 (cmdstatp->flags & SENSE_EOM) &&
632 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
633 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) {
634 /* EOM at write-behind, has all data been written? */
635 if (!cmdstatp->remainder_valid ||
636 cmdstatp->uremainder64 == 0)
637 retval = -ENOSPC;
638 }
639 if (retval == -EIO)
640 STps->drv_block = -1;
641 }
642 STbuffer->writing = 0;
643
644 DEB(if (debugging && retval)
645 printk(ST_DEB_MSG "%s: Async write error %x, return value %d.\n",
646 tape_name(STp), STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */
647
648 return retval;
649}
650
651
652/* Step over EOF if it has been inadvertently crossed (ioctl not used because
653 it messes up the block number). */
654static int cross_eof(struct scsi_tape * STp, int forward)
655{
656 struct st_request *SRpnt;
657 unsigned char cmd[MAX_COMMAND_SIZE];
658
659 cmd[0] = SPACE;
660 cmd[1] = 0x01; /* Space FileMarks */
661 if (forward) {
662 cmd[2] = cmd[3] = 0;
663 cmd[4] = 1;
664 } else
665 cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */
666 cmd[5] = 0;
667
668 DEBC(printk(ST_DEB_MSG "%s: Stepping over filemark %s.\n",
669 tape_name(STp), forward ? "forward" : "backward"));
670
671 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
672 STp->device->request_queue->rq_timeout,
673 MAX_RETRIES, 1);
674 if (!SRpnt)
675 return (STp->buffer)->syscall_result;
676
677 st_release_request(SRpnt);
678 SRpnt = NULL;
679
680 if ((STp->buffer)->cmdstat.midlevel_result != 0)
681 printk(KERN_ERR "%s: Stepping over filemark %s failed.\n",
682 tape_name(STp), forward ? "forward" : "backward");
683
684 return (STp->buffer)->syscall_result;
685}
686
687
688/* Flush the write buffer (never need to write if variable blocksize). */
689static int st_flush_write_buffer(struct scsi_tape * STp)
690{
691 int transfer, blks;
692 int result;
693 unsigned char cmd[MAX_COMMAND_SIZE];
694 struct st_request *SRpnt;
695 struct st_partstat *STps;
696
697 result = write_behind_check(STp);
698 if (result)
699 return result;
700
701 result = 0;
702 if (STp->dirty == 1) {
703
704 transfer = STp->buffer->buffer_bytes;
705 DEBC(printk(ST_DEB_MSG "%s: Flushing %d bytes.\n",
706 tape_name(STp), transfer));
707
708 memset(cmd, 0, MAX_COMMAND_SIZE);
709 cmd[0] = WRITE_6;
710 cmd[1] = 1;
711 blks = transfer / STp->block_size;
712 cmd[2] = blks >> 16;
713 cmd[3] = blks >> 8;
714 cmd[4] = blks;
715
716 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE,
717 STp->device->request_queue->rq_timeout,
718 MAX_WRITE_RETRIES, 1);
719 if (!SRpnt)
720 return (STp->buffer)->syscall_result;
721
722 STps = &(STp->ps[STp->partition]);
723 if ((STp->buffer)->syscall_result != 0) {
724 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
725
726 if (cmdstatp->have_sense && !cmdstatp->deferred &&
727 (cmdstatp->flags & SENSE_EOM) &&
728 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
729 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
730 (!cmdstatp->remainder_valid ||
731 cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */
732 STp->dirty = 0;
733 (STp->buffer)->buffer_bytes = 0;
734 if (STps->drv_block >= 0)
735 STps->drv_block += blks;
736 result = (-ENOSPC);
737 } else {
738 printk(KERN_ERR "%s: Error on flush.\n",
739 tape_name(STp));
740 STps->drv_block = (-1);
741 result = (-EIO);
742 }
743 } else {
744 if (STps->drv_block >= 0)
745 STps->drv_block += blks;
746 STp->dirty = 0;
747 (STp->buffer)->buffer_bytes = 0;
748 }
749 st_release_request(SRpnt);
750 SRpnt = NULL;
751 }
752 return result;
753}
754
755
756/* Flush the tape buffer. The tape will be positioned correctly unless
757 seek_next is true. */
758static int flush_buffer(struct scsi_tape *STp, int seek_next)
759{
760 int backspace, result;
761 struct st_buffer *STbuffer;
762 struct st_partstat *STps;
763
764 STbuffer = STp->buffer;
765
766 /*
767 * If there was a bus reset, block further access
768 * to this device.
769 */
770 if (STp->pos_unknown)
771 return (-EIO);
772
773 if (STp->ready != ST_READY)
774 return 0;
775 STps = &(STp->ps[STp->partition]);
776 if (STps->rw == ST_WRITING) /* Writing */
777 return st_flush_write_buffer(STp);
778
779 if (STp->block_size == 0)
780 return 0;
781
782 backspace = ((STp->buffer)->buffer_bytes +
783 (STp->buffer)->read_pointer) / STp->block_size -
784 ((STp->buffer)->read_pointer + STp->block_size - 1) /
785 STp->block_size;
786 (STp->buffer)->buffer_bytes = 0;
787 (STp->buffer)->read_pointer = 0;
788 result = 0;
789 if (!seek_next) {
790 if (STps->eof == ST_FM_HIT) {
791 result = cross_eof(STp, 0); /* Back over the EOF hit */
792 if (!result)
793 STps->eof = ST_NOEOF;
794 else {
795 if (STps->drv_file >= 0)
796 STps->drv_file++;
797 STps->drv_block = 0;
798 }
799 }
800 if (!result && backspace > 0)
801 result = st_int_ioctl(STp, MTBSR, backspace);
802 } else if (STps->eof == ST_FM_HIT) {
803 if (STps->drv_file >= 0)
804 STps->drv_file++;
805 STps->drv_block = 0;
806 STps->eof = ST_NOEOF;
807 }
808 return result;
809
810}
811
812/* Set the mode parameters */
813static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm)
814{
815 int set_it = 0;
816 unsigned long arg;
817 char *name = tape_name(STp);
818
819 if (!STp->density_changed &&
820 STm->default_density >= 0 &&
821 STm->default_density != STp->density) {
822 arg = STm->default_density;
823 set_it = 1;
824 } else
825 arg = STp->density;
826 arg <<= MT_ST_DENSITY_SHIFT;
827 if (!STp->blksize_changed &&
828 STm->default_blksize >= 0 &&
829 STm->default_blksize != STp->block_size) {
830 arg |= STm->default_blksize;
831 set_it = 1;
832 } else
833 arg |= STp->block_size;
834 if (set_it &&
835 st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) {
836 printk(KERN_WARNING
837 "%s: Can't set default block size to %d bytes and density %x.\n",
838 name, STm->default_blksize, STm->default_density);
839 if (modes_defined)
840 return (-EINVAL);
841 }
842 return 0;
843}
844
845
846/* Lock or unlock the drive door. Don't use when st_request allocated. */
847static int do_door_lock(struct scsi_tape * STp, int do_lock)
848{
849 int retval, cmd;
850 DEB(char *name = tape_name(STp);)
851
852
853 cmd = do_lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK;
854 DEBC(printk(ST_DEB_MSG "%s: %socking drive door.\n", name,
855 do_lock ? "L" : "Unl"));
856 retval = scsi_ioctl(STp->device, cmd, NULL);
857 if (!retval) {
858 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
859 }
860 else {
861 STp->door_locked = ST_LOCK_FAILS;
862 }
863 return retval;
864}
865
866
867/* Set the internal state after reset */
868static void reset_state(struct scsi_tape *STp)
869{
870 int i;
871 struct st_partstat *STps;
872
873 STp->pos_unknown = 0;
874 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
875 STps = &(STp->ps[i]);
876 STps->rw = ST_IDLE;
877 STps->eof = ST_NOEOF;
878 STps->at_sm = 0;
879 STps->last_block_valid = 0;
880 STps->drv_block = -1;
881 STps->drv_file = -1;
882 }
883 if (STp->can_partitions) {
884 STp->partition = find_partition(STp);
885 if (STp->partition < 0)
886 STp->partition = 0;
887 STp->new_partition = STp->partition;
888 }
889}
890
891/* Test if the drive is ready. Returns either one of the codes below or a negative system
892 error code. */
893#define CHKRES_READY 0
894#define CHKRES_NEW_SESSION 1
895#define CHKRES_NOT_READY 2
896#define CHKRES_NO_TAPE 3
897
898#define MAX_ATTENTIONS 10
899
900static int test_ready(struct scsi_tape *STp, int do_wait)
901{
902 int attentions, waits, max_wait, scode;
903 int retval = CHKRES_READY, new_session = 0;
904 unsigned char cmd[MAX_COMMAND_SIZE];
905 struct st_request *SRpnt = NULL;
906 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
907
908 max_wait = do_wait ? ST_BLOCK_SECONDS : 0;
909
910 for (attentions=waits=0; ; ) {
911 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
912 cmd[0] = TEST_UNIT_READY;
913 SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
914 STp->long_timeout, MAX_READY_RETRIES, 1);
915
916 if (!SRpnt) {
917 retval = (STp->buffer)->syscall_result;
918 break;
919 }
920
921 if (cmdstatp->have_sense) {
922
923 scode = cmdstatp->sense_hdr.sense_key;
924
925 if (scode == UNIT_ATTENTION) { /* New media? */
926 new_session = 1;
927 if (attentions < MAX_ATTENTIONS) {
928 attentions++;
929 continue;
930 }
931 else {
932 retval = (-EIO);
933 break;
934 }
935 }
936
937 if (scode == NOT_READY) {
938 if (waits < max_wait) {
939 if (msleep_interruptible(1000)) {
940 retval = (-EINTR);
941 break;
942 }
943 waits++;
944 continue;
945 }
946 else {
947 if ((STp->device)->scsi_level >= SCSI_2 &&
948 cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */
949 retval = CHKRES_NO_TAPE;
950 else
951 retval = CHKRES_NOT_READY;
952 break;
953 }
954 }
955 }
956
957 retval = (STp->buffer)->syscall_result;
958 if (!retval)
959 retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY;
960 break;
961 }
962
963 if (SRpnt != NULL)
964 st_release_request(SRpnt);
965 return retval;
966}
967
968
969/* See if the drive is ready and gather information about the tape. Return values:
970 < 0 negative error code from errno.h
971 0 drive ready
972 1 drive not ready (possibly no tape)
973*/
974static int check_tape(struct scsi_tape *STp, struct file *filp)
975{
976 int i, retval, new_session = 0, do_wait;
977 unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning;
978 unsigned short st_flags = filp->f_flags;
979 struct st_request *SRpnt = NULL;
980 struct st_modedef *STm;
981 struct st_partstat *STps;
982 char *name = tape_name(STp);
983 struct inode *inode = filp->f_path.dentry->d_inode;
984 int mode = TAPE_MODE(inode);
985
986 STp->ready = ST_READY;
987
988 if (mode != STp->current_mode) {
989 DEBC(printk(ST_DEB_MSG "%s: Mode change from %d to %d.\n",
990 name, STp->current_mode, mode));
991 new_session = 1;
992 STp->current_mode = mode;
993 }
994 STm = &(STp->modes[STp->current_mode]);
995
996 saved_cleaning = STp->cleaning_req;
997 STp->cleaning_req = 0;
998
999 do_wait = ((filp->f_flags & O_NONBLOCK) == 0);
1000 retval = test_ready(STp, do_wait);
1001
1002 if (retval < 0)
1003 goto err_out;
1004
1005 if (retval == CHKRES_NEW_SESSION) {
1006 STp->pos_unknown = 0;
1007 STp->partition = STp->new_partition = 0;
1008 if (STp->can_partitions)
1009 STp->nbr_partitions = 1; /* This guess will be updated later
1010 if necessary */
1011 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1012 STps = &(STp->ps[i]);
1013 STps->rw = ST_IDLE;
1014 STps->eof = ST_NOEOF;
1015 STps->at_sm = 0;
1016 STps->last_block_valid = 0;
1017 STps->drv_block = 0;
1018 STps->drv_file = 0;
1019 }
1020 new_session = 1;
1021 }
1022 else {
1023 STp->cleaning_req |= saved_cleaning;
1024
1025 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) {
1026 if (retval == CHKRES_NO_TAPE)
1027 STp->ready = ST_NO_TAPE;
1028 else
1029 STp->ready = ST_NOT_READY;
1030
1031 STp->density = 0; /* Clear the erroneous "residue" */
1032 STp->write_prot = 0;
1033 STp->block_size = 0;
1034 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
1035 STp->partition = STp->new_partition = 0;
1036 STp->door_locked = ST_UNLOCKED;
1037 return CHKRES_NOT_READY;
1038 }
1039 }
1040
1041 if (STp->omit_blklims)
1042 STp->min_block = STp->max_block = (-1);
1043 else {
1044 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1045 cmd[0] = READ_BLOCK_LIMITS;
1046
1047 SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE,
1048 STp->device->request_queue->rq_timeout,
1049 MAX_READY_RETRIES, 1);
1050 if (!SRpnt) {
1051 retval = (STp->buffer)->syscall_result;
1052 goto err_out;
1053 }
1054
1055 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) {
1056 STp->max_block = ((STp->buffer)->b_data[1] << 16) |
1057 ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3];
1058 STp->min_block = ((STp->buffer)->b_data[4] << 8) |
1059 (STp->buffer)->b_data[5];
1060 if ( DEB( debugging || ) !STp->inited)
1061 printk(KERN_INFO
1062 "%s: Block limits %d - %d bytes.\n", name,
1063 STp->min_block, STp->max_block);
1064 } else {
1065 STp->min_block = STp->max_block = (-1);
1066 DEBC(printk(ST_DEB_MSG "%s: Can't read block limits.\n",
1067 name));
1068 }
1069 }
1070
1071 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1072 cmd[0] = MODE_SENSE;
1073 cmd[4] = 12;
1074
1075 SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE,
1076 STp->device->request_queue->rq_timeout,
1077 MAX_READY_RETRIES, 1);
1078 if (!SRpnt) {
1079 retval = (STp->buffer)->syscall_result;
1080 goto err_out;
1081 }
1082
1083 if ((STp->buffer)->syscall_result != 0) {
1084 DEBC(printk(ST_DEB_MSG "%s: No Mode Sense.\n", name));
1085 STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */
1086 (STp->buffer)->syscall_result = 0; /* Prevent error propagation */
1087 STp->drv_write_prot = 0;
1088 } else {
1089 DEBC(printk(ST_DEB_MSG
1090 "%s: Mode sense. Length %d, medium %x, WBS %x, BLL %d\n",
1091 name,
1092 (STp->buffer)->b_data[0], (STp->buffer)->b_data[1],
1093 (STp->buffer)->b_data[2], (STp->buffer)->b_data[3]));
1094
1095 if ((STp->buffer)->b_data[3] >= 8) {
1096 STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7;
1097 STp->density = (STp->buffer)->b_data[4];
1098 STp->block_size = (STp->buffer)->b_data[9] * 65536 +
1099 (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11];
1100 DEBC(printk(ST_DEB_MSG
1101 "%s: Density %x, tape length: %x, drv buffer: %d\n",
1102 name, STp->density, (STp->buffer)->b_data[5] * 65536 +
1103 (STp->buffer)->b_data[6] * 256 + (STp->buffer)->b_data[7],
1104 STp->drv_buffer));
1105 }
1106 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
1107 }
1108 st_release_request(SRpnt);
1109 SRpnt = NULL;
1110 STp->inited = 1;
1111
1112 if (STp->block_size > 0)
1113 (STp->buffer)->buffer_blocks =
1114 (STp->buffer)->buffer_size / STp->block_size;
1115 else
1116 (STp->buffer)->buffer_blocks = 1;
1117 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
1118
1119 DEBC(printk(ST_DEB_MSG
1120 "%s: Block size: %d, buffer size: %d (%d blocks).\n", name,
1121 STp->block_size, (STp->buffer)->buffer_size,
1122 (STp->buffer)->buffer_blocks));
1123
1124 if (STp->drv_write_prot) {
1125 STp->write_prot = 1;
1126
1127 DEBC(printk(ST_DEB_MSG "%s: Write protected\n", name));
1128
1129 if (do_wait &&
1130 ((st_flags & O_ACCMODE) == O_WRONLY ||
1131 (st_flags & O_ACCMODE) == O_RDWR)) {
1132 retval = (-EROFS);
1133 goto err_out;
1134 }
1135 }
1136
1137 if (STp->can_partitions && STp->nbr_partitions < 1) {
1138 /* This code is reached when the device is opened for the first time
1139 after the driver has been initialized with tape in the drive and the
1140 partition support has been enabled. */
1141 DEBC(printk(ST_DEB_MSG
1142 "%s: Updating partition number in status.\n", name));
1143 if ((STp->partition = find_partition(STp)) < 0) {
1144 retval = STp->partition;
1145 goto err_out;
1146 }
1147 STp->new_partition = STp->partition;
1148 STp->nbr_partitions = 1; /* This guess will be updated when necessary */
1149 }
1150
1151 if (new_session) { /* Change the drive parameters for the new mode */
1152 STp->density_changed = STp->blksize_changed = 0;
1153 STp->compression_changed = 0;
1154 if (!(STm->defaults_for_writes) &&
1155 (retval = set_mode_densblk(STp, STm)) < 0)
1156 goto err_out;
1157
1158 if (STp->default_drvbuffer != 0xff) {
1159 if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer))
1160 printk(KERN_WARNING
1161 "%s: Can't set default drive buffering to %d.\n",
1162 name, STp->default_drvbuffer);
1163 }
1164 }
1165
1166 return CHKRES_READY;
1167
1168 err_out:
1169 return retval;
1170}
1171
1172
1173 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host
1174 module count. */
1175static int st_open(struct inode *inode, struct file *filp)
1176{
1177 int i, retval = (-EIO);
1178 struct scsi_tape *STp;
1179 struct st_partstat *STps;
1180 int dev = TAPE_NR(inode);
1181 char *name;
1182
1183 mutex_lock(&st_mutex);
1184 /*
1185 * We really want to do nonseekable_open(inode, filp); here, but some
1186 * versions of tar incorrectly call lseek on tapes and bail out if that
1187 * fails. So we disallow pread() and pwrite(), but permit lseeks.
1188 */
1189 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
1190
1191 if (!(STp = scsi_tape_get(dev))) {
1192 mutex_unlock(&st_mutex);
1193 return -ENXIO;
1194 }
1195
1196 write_lock(&st_dev_arr_lock);
1197 filp->private_data = STp;
1198 name = tape_name(STp);
1199
1200 if (STp->in_use) {
1201 write_unlock(&st_dev_arr_lock);
1202 scsi_tape_put(STp);
1203 mutex_unlock(&st_mutex);
1204 DEB( printk(ST_DEB_MSG "%s: Device already in use.\n", name); )
1205 return (-EBUSY);
1206 }
1207
1208 STp->in_use = 1;
1209 write_unlock(&st_dev_arr_lock);
1210 STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0;
1211
1212 if (!scsi_block_when_processing_errors(STp->device)) {
1213 retval = (-ENXIO);
1214 goto err_out;
1215 }
1216
1217 /* See that we have at least a one page buffer available */
1218 if (!enlarge_buffer(STp->buffer, PAGE_SIZE, STp->restr_dma)) {
1219 printk(KERN_WARNING "%s: Can't allocate one page tape buffer.\n",
1220 name);
1221 retval = (-EOVERFLOW);
1222 goto err_out;
1223 }
1224
1225 (STp->buffer)->cleared = 0;
1226 (STp->buffer)->writing = 0;
1227 (STp->buffer)->syscall_result = 0;
1228
1229 STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY);
1230
1231 STp->dirty = 0;
1232 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1233 STps = &(STp->ps[i]);
1234 STps->rw = ST_IDLE;
1235 }
1236 STp->try_dio_now = STp->try_dio;
1237 STp->recover_count = 0;
1238 DEB( STp->nbr_waits = STp->nbr_finished = 0;
1239 STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; )
1240
1241 retval = check_tape(STp, filp);
1242 if (retval < 0)
1243 goto err_out;
1244 if ((filp->f_flags & O_NONBLOCK) == 0 &&
1245 retval != CHKRES_READY) {
1246 if (STp->ready == NO_TAPE)
1247 retval = (-ENOMEDIUM);
1248 else
1249 retval = (-EIO);
1250 goto err_out;
1251 }
1252 mutex_unlock(&st_mutex);
1253 return 0;
1254
1255 err_out:
1256 normalize_buffer(STp->buffer);
1257 STp->in_use = 0;
1258 scsi_tape_put(STp);
1259 mutex_unlock(&st_mutex);
1260 return retval;
1261
1262}
1263
1264
1265/* Flush the tape buffer before close */
1266static int st_flush(struct file *filp, fl_owner_t id)
1267{
1268 int result = 0, result2;
1269 unsigned char cmd[MAX_COMMAND_SIZE];
1270 struct st_request *SRpnt;
1271 struct scsi_tape *STp = filp->private_data;
1272 struct st_modedef *STm = &(STp->modes[STp->current_mode]);
1273 struct st_partstat *STps = &(STp->ps[STp->partition]);
1274 char *name = tape_name(STp);
1275
1276 if (file_count(filp) > 1)
1277 return 0;
1278
1279 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1280 result = st_flush_write_buffer(STp);
1281 if (result != 0 && result != (-ENOSPC))
1282 goto out;
1283 }
1284
1285 if (STp->can_partitions &&
1286 (result2 = switch_partition(STp)) < 0) {
1287 DEBC(printk(ST_DEB_MSG
1288 "%s: switch_partition at close failed.\n", name));
1289 if (result == 0)
1290 result = result2;
1291 goto out;
1292 }
1293
1294 DEBC( if (STp->nbr_requests)
1295 printk(KERN_DEBUG "%s: Number of r/w requests %d, dio used in %d, pages %d.\n",
1296 name, STp->nbr_requests, STp->nbr_dio, STp->nbr_pages));
1297
1298 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1299 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1300
1301 DEBC(printk(ST_DEB_MSG "%s: Async write waits %d, finished %d.\n",
1302 name, STp->nbr_waits, STp->nbr_finished);
1303 )
1304
1305 memset(cmd, 0, MAX_COMMAND_SIZE);
1306 cmd[0] = WRITE_FILEMARKS;
1307 cmd[4] = 1 + STp->two_fm;
1308
1309 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
1310 STp->device->request_queue->rq_timeout,
1311 MAX_WRITE_RETRIES, 1);
1312 if (!SRpnt) {
1313 result = (STp->buffer)->syscall_result;
1314 goto out;
1315 }
1316
1317 if (STp->buffer->syscall_result == 0 ||
1318 (cmdstatp->have_sense && !cmdstatp->deferred &&
1319 (cmdstatp->flags & SENSE_EOM) &&
1320 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
1321 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
1322 (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) {
1323 /* Write successful at EOM */
1324 st_release_request(SRpnt);
1325 SRpnt = NULL;
1326 if (STps->drv_file >= 0)
1327 STps->drv_file++;
1328 STps->drv_block = 0;
1329 if (STp->two_fm)
1330 cross_eof(STp, 0);
1331 STps->eof = ST_FM;
1332 }
1333 else { /* Write error */
1334 st_release_request(SRpnt);
1335 SRpnt = NULL;
1336 printk(KERN_ERR "%s: Error on write filemark.\n", name);
1337 if (result == 0)
1338 result = (-EIO);
1339 }
1340
1341 DEBC(printk(ST_DEB_MSG "%s: Buffer flushed, %d EOF(s) written\n",
1342 name, cmd[4]));
1343 } else if (!STp->rew_at_close) {
1344 STps = &(STp->ps[STp->partition]);
1345 if (!STm->sysv || STps->rw != ST_READING) {
1346 if (STp->can_bsr)
1347 result = flush_buffer(STp, 0);
1348 else if (STps->eof == ST_FM_HIT) {
1349 result = cross_eof(STp, 0);
1350 if (result) {
1351 if (STps->drv_file >= 0)
1352 STps->drv_file++;
1353 STps->drv_block = 0;
1354 STps->eof = ST_FM;
1355 } else
1356 STps->eof = ST_NOEOF;
1357 }
1358 } else if ((STps->eof == ST_NOEOF &&
1359 !(result = cross_eof(STp, 1))) ||
1360 STps->eof == ST_FM_HIT) {
1361 if (STps->drv_file >= 0)
1362 STps->drv_file++;
1363 STps->drv_block = 0;
1364 STps->eof = ST_FM;
1365 }
1366 }
1367
1368 out:
1369 if (STp->rew_at_close) {
1370 result2 = st_int_ioctl(STp, MTREW, 1);
1371 if (result == 0)
1372 result = result2;
1373 }
1374 return result;
1375}
1376
1377
1378/* Close the device and release it. BKL is not needed: this is the only thread
1379 accessing this tape. */
1380static int st_release(struct inode *inode, struct file *filp)
1381{
1382 int result = 0;
1383 struct scsi_tape *STp = filp->private_data;
1384
1385 if (STp->door_locked == ST_LOCKED_AUTO)
1386 do_door_lock(STp, 0);
1387
1388 normalize_buffer(STp->buffer);
1389 write_lock(&st_dev_arr_lock);
1390 STp->in_use = 0;
1391 write_unlock(&st_dev_arr_lock);
1392 scsi_tape_put(STp);
1393
1394 return result;
1395}
1396
1397/* The checks common to both reading and writing */
1398static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
1399{
1400 ssize_t retval = 0;
1401
1402 /*
1403 * If we are in the middle of error recovery, don't let anyone
1404 * else try and use this device. Also, if error recovery fails, it
1405 * may try and take the device offline, in which case all further
1406 * access to the device is prohibited.
1407 */
1408 if (!scsi_block_when_processing_errors(STp->device)) {
1409 retval = (-ENXIO);
1410 goto out;
1411 }
1412
1413 if (STp->ready != ST_READY) {
1414 if (STp->ready == ST_NO_TAPE)
1415 retval = (-ENOMEDIUM);
1416 else
1417 retval = (-EIO);
1418 goto out;
1419 }
1420
1421 if (! STp->modes[STp->current_mode].defined) {
1422 retval = (-ENXIO);
1423 goto out;
1424 }
1425
1426
1427 /*
1428 * If there was a bus reset, block further access
1429 * to this device.
1430 */
1431 if (STp->pos_unknown) {
1432 retval = (-EIO);
1433 goto out;
1434 }
1435
1436 if (count == 0)
1437 goto out;
1438
1439 DEB(
1440 if (!STp->in_use) {
1441 printk(ST_DEB_MSG "%s: Incorrect device.\n", tape_name(STp));
1442 retval = (-EIO);
1443 goto out;
1444 } ) /* end DEB */
1445
1446 if (STp->can_partitions &&
1447 (retval = switch_partition(STp)) < 0)
1448 goto out;
1449
1450 if (STp->block_size == 0 && STp->max_block > 0 &&
1451 (count < STp->min_block || count > STp->max_block)) {
1452 retval = (-EINVAL);
1453 goto out;
1454 }
1455
1456 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED &&
1457 !do_door_lock(STp, 1))
1458 STp->door_locked = ST_LOCKED_AUTO;
1459
1460 out:
1461 return retval;
1462}
1463
1464
1465static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
1466 size_t count, int is_read)
1467{
1468 int i, bufsize, retval = 0;
1469 struct st_buffer *STbp = STp->buffer;
1470
1471 if (is_read)
1472 i = STp->try_dio_now && try_rdio;
1473 else
1474 i = STp->try_dio_now && try_wdio;
1475
1476 if (i && ((unsigned long)buf & queue_dma_alignment(
1477 STp->device->request_queue)) == 0) {
1478 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf,
1479 count, (is_read ? READ : WRITE));
1480 if (i > 0) {
1481 STbp->do_dio = i;
1482 STbp->buffer_bytes = 0; /* can be used as transfer counter */
1483 }
1484 else
1485 STbp->do_dio = 0; /* fall back to buffering with any error */
1486 STbp->sg_segs = STbp->do_dio;
1487 DEB(
1488 if (STbp->do_dio) {
1489 STp->nbr_dio++;
1490 STp->nbr_pages += STbp->do_dio;
1491 }
1492 )
1493 } else
1494 STbp->do_dio = 0;
1495 DEB( STp->nbr_requests++; )
1496
1497 if (!STbp->do_dio) {
1498 if (STp->block_size)
1499 bufsize = STp->block_size > st_fixed_buffer_size ?
1500 STp->block_size : st_fixed_buffer_size;
1501 else {
1502 bufsize = count;
1503 /* Make sure that data from previous user is not leaked even if
1504 HBA does not return correct residual */
1505 if (is_read && STp->sili && !STbp->cleared)
1506 clear_buffer(STbp);
1507 }
1508
1509 if (bufsize > STbp->buffer_size &&
1510 !enlarge_buffer(STbp, bufsize, STp->restr_dma)) {
1511 printk(KERN_WARNING "%s: Can't allocate %d byte tape buffer.\n",
1512 tape_name(STp), bufsize);
1513 retval = (-EOVERFLOW);
1514 goto out;
1515 }
1516 if (STp->block_size)
1517 STbp->buffer_blocks = bufsize / STp->block_size;
1518 }
1519
1520 out:
1521 return retval;
1522}
1523
1524
1525/* Can be called more than once after each setup_buffer() */
1526static void release_buffering(struct scsi_tape *STp, int is_read)
1527{
1528 struct st_buffer *STbp;
1529
1530 STbp = STp->buffer;
1531 if (STbp->do_dio) {
1532 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read);
1533 STbp->do_dio = 0;
1534 STbp->sg_segs = 0;
1535 }
1536}
1537
1538
1539/* Write command */
1540static ssize_t
1541st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
1542{
1543 ssize_t total;
1544 ssize_t i, do_count, blks, transfer;
1545 ssize_t retval;
1546 int undone, retry_eot = 0, scode;
1547 int async_write;
1548 unsigned char cmd[MAX_COMMAND_SIZE];
1549 const char __user *b_point;
1550 struct st_request *SRpnt = NULL;
1551 struct scsi_tape *STp = filp->private_data;
1552 struct st_modedef *STm;
1553 struct st_partstat *STps;
1554 struct st_buffer *STbp;
1555 char *name = tape_name(STp);
1556
1557 if (mutex_lock_interruptible(&STp->lock))
1558 return -ERESTARTSYS;
1559
1560 retval = rw_checks(STp, filp, count);
1561 if (retval || count == 0)
1562 goto out;
1563
1564 /* Write must be integral number of blocks */
1565 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
1566 printk(KERN_WARNING "%s: Write not multiple of tape block size.\n",
1567 name);
1568 retval = (-EINVAL);
1569 goto out;
1570 }
1571
1572 STm = &(STp->modes[STp->current_mode]);
1573 STps = &(STp->ps[STp->partition]);
1574
1575 if (STp->write_prot) {
1576 retval = (-EACCES);
1577 goto out;
1578 }
1579
1580
1581 if (STps->rw == ST_READING) {
1582 retval = flush_buffer(STp, 0);
1583 if (retval)
1584 goto out;
1585 STps->rw = ST_WRITING;
1586 } else if (STps->rw != ST_WRITING &&
1587 STps->drv_file == 0 && STps->drv_block == 0) {
1588 if ((retval = set_mode_densblk(STp, STm)) < 0)
1589 goto out;
1590 if (STm->default_compression != ST_DONT_TOUCH &&
1591 !(STp->compression_changed)) {
1592 if (st_compression(STp, (STm->default_compression == ST_YES))) {
1593 printk(KERN_WARNING "%s: Can't set default compression.\n",
1594 name);
1595 if (modes_defined) {
1596 retval = (-EINVAL);
1597 goto out;
1598 }
1599 }
1600 }
1601 }
1602
1603 STbp = STp->buffer;
1604 i = write_behind_check(STp);
1605 if (i) {
1606 if (i == -ENOSPC)
1607 STps->eof = ST_EOM_OK;
1608 else
1609 STps->eof = ST_EOM_ERROR;
1610 }
1611
1612 if (STps->eof == ST_EOM_OK) {
1613 STps->eof = ST_EOD_1; /* allow next write */
1614 retval = (-ENOSPC);
1615 goto out;
1616 }
1617 else if (STps->eof == ST_EOM_ERROR) {
1618 retval = (-EIO);
1619 goto out;
1620 }
1621
1622 /* Check the buffer readability in cases where copy_user might catch
1623 the problems after some tape movement. */
1624 if (STp->block_size != 0 &&
1625 !STbp->do_dio &&
1626 (copy_from_user(&i, buf, 1) != 0 ||
1627 copy_from_user(&i, buf + count - 1, 1) != 0)) {
1628 retval = (-EFAULT);
1629 goto out;
1630 }
1631
1632 retval = setup_buffering(STp, buf, count, 0);
1633 if (retval)
1634 goto out;
1635
1636 total = count;
1637
1638 memset(cmd, 0, MAX_COMMAND_SIZE);
1639 cmd[0] = WRITE_6;
1640 cmd[1] = (STp->block_size != 0);
1641
1642 STps->rw = ST_WRITING;
1643
1644 b_point = buf;
1645 while (count > 0 && !retry_eot) {
1646
1647 if (STbp->do_dio) {
1648 do_count = count;
1649 }
1650 else {
1651 if (STp->block_size == 0)
1652 do_count = count;
1653 else {
1654 do_count = STbp->buffer_blocks * STp->block_size -
1655 STbp->buffer_bytes;
1656 if (do_count > count)
1657 do_count = count;
1658 }
1659
1660 i = append_to_buffer(b_point, STbp, do_count);
1661 if (i) {
1662 retval = i;
1663 goto out;
1664 }
1665 }
1666 count -= do_count;
1667 b_point += do_count;
1668
1669 async_write = STp->block_size == 0 && !STbp->do_dio &&
1670 STm->do_async_writes && STps->eof < ST_EOM_OK;
1671
1672 if (STp->block_size != 0 && STm->do_buffer_writes &&
1673 !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
1674 STbp->buffer_bytes < STbp->buffer_size) {
1675 STp->dirty = 1;
1676 /* Don't write a buffer that is not full enough. */
1677 if (!async_write && count == 0)
1678 break;
1679 }
1680
1681 retry_write:
1682 if (STp->block_size == 0)
1683 blks = transfer = do_count;
1684 else {
1685 if (!STbp->do_dio)
1686 blks = STbp->buffer_bytes;
1687 else
1688 blks = do_count;
1689 blks /= STp->block_size;
1690 transfer = blks * STp->block_size;
1691 }
1692 cmd[2] = blks >> 16;
1693 cmd[3] = blks >> 8;
1694 cmd[4] = blks;
1695
1696 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
1697 STp->device->request_queue->rq_timeout,
1698 MAX_WRITE_RETRIES, !async_write);
1699 if (!SRpnt) {
1700 retval = STbp->syscall_result;
1701 goto out;
1702 }
1703 if (async_write && !STbp->syscall_result) {
1704 STbp->writing = transfer;
1705 STp->dirty = !(STbp->writing ==
1706 STbp->buffer_bytes);
1707 SRpnt = NULL; /* Prevent releasing this request! */
1708 DEB( STp->write_pending = 1; )
1709 break;
1710 }
1711
1712 if (STbp->syscall_result != 0) {
1713 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1714
1715 DEBC(printk(ST_DEB_MSG "%s: Error on write:\n", name));
1716 if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) {
1717 scode = cmdstatp->sense_hdr.sense_key;
1718 if (cmdstatp->remainder_valid)
1719 undone = (int)cmdstatp->uremainder64;
1720 else if (STp->block_size == 0 &&
1721 scode == VOLUME_OVERFLOW)
1722 undone = transfer;
1723 else
1724 undone = 0;
1725 if (STp->block_size != 0)
1726 undone *= STp->block_size;
1727 if (undone <= do_count) {
1728 /* Only data from this write is not written */
1729 count += undone;
1730 b_point -= undone;
1731 do_count -= undone;
1732 if (STp->block_size)
1733 blks = (transfer - undone) / STp->block_size;
1734 STps->eof = ST_EOM_OK;
1735 /* Continue in fixed block mode if all written
1736 in this request but still something left to write
1737 (retval left to zero)
1738 */
1739 if (STp->block_size == 0 ||
1740 undone > 0 || count == 0)
1741 retval = (-ENOSPC); /* EOM within current request */
1742 DEBC(printk(ST_DEB_MSG
1743 "%s: EOM with %d bytes unwritten.\n",
1744 name, (int)count));
1745 } else {
1746 /* EOT within data buffered earlier (possible only
1747 in fixed block mode without direct i/o) */
1748 if (!retry_eot && !cmdstatp->deferred &&
1749 (scode == NO_SENSE || scode == RECOVERED_ERROR)) {
1750 move_buffer_data(STp->buffer, transfer - undone);
1751 retry_eot = 1;
1752 if (STps->drv_block >= 0) {
1753 STps->drv_block += (transfer - undone) /
1754 STp->block_size;
1755 }
1756 STps->eof = ST_EOM_OK;
1757 DEBC(printk(ST_DEB_MSG
1758 "%s: Retry write of %d bytes at EOM.\n",
1759 name, STp->buffer->buffer_bytes));
1760 goto retry_write;
1761 }
1762 else {
1763 /* Either error within data buffered by driver or
1764 failed retry */
1765 count -= do_count;
1766 blks = do_count = 0;
1767 STps->eof = ST_EOM_ERROR;
1768 STps->drv_block = (-1); /* Too cautious? */
1769 retval = (-EIO); /* EOM for old data */
1770 DEBC(printk(ST_DEB_MSG
1771 "%s: EOM with lost data.\n",
1772 name));
1773 }
1774 }
1775 } else {
1776 count += do_count;
1777 STps->drv_block = (-1); /* Too cautious? */
1778 retval = STbp->syscall_result;
1779 }
1780
1781 }
1782
1783 if (STps->drv_block >= 0) {
1784 if (STp->block_size == 0)
1785 STps->drv_block += (do_count > 0);
1786 else
1787 STps->drv_block += blks;
1788 }
1789
1790 STbp->buffer_bytes = 0;
1791 STp->dirty = 0;
1792
1793 if (retval || retry_eot) {
1794 if (count < total)
1795 retval = total - count;
1796 goto out;
1797 }
1798 }
1799
1800 if (STps->eof == ST_EOD_1)
1801 STps->eof = ST_EOM_OK;
1802 else if (STps->eof != ST_EOM_OK)
1803 STps->eof = ST_NOEOF;
1804 retval = total - count;
1805
1806 out:
1807 if (SRpnt != NULL)
1808 st_release_request(SRpnt);
1809 release_buffering(STp, 0);
1810 mutex_unlock(&STp->lock);
1811
1812 return retval;
1813}
1814
1815/* Read data from the tape. Returns zero in the normal case, one if the
1816 eof status has changed, and the negative error code in case of a
1817 fatal error. Otherwise updates the buffer and the eof state.
1818
1819 Does release user buffer mapping if it is set.
1820*/
1821static long read_tape(struct scsi_tape *STp, long count,
1822 struct st_request ** aSRpnt)
1823{
1824 int transfer, blks, bytes;
1825 unsigned char cmd[MAX_COMMAND_SIZE];
1826 struct st_request *SRpnt;
1827 struct st_modedef *STm;
1828 struct st_partstat *STps;
1829 struct st_buffer *STbp;
1830 int retval = 0;
1831 char *name = tape_name(STp);
1832
1833 if (count == 0)
1834 return 0;
1835
1836 STm = &(STp->modes[STp->current_mode]);
1837 STps = &(STp->ps[STp->partition]);
1838 if (STps->eof == ST_FM_HIT)
1839 return 1;
1840 STbp = STp->buffer;
1841
1842 if (STp->block_size == 0)
1843 blks = bytes = count;
1844 else {
1845 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
1846 blks = (STp->buffer)->buffer_blocks;
1847 bytes = blks * STp->block_size;
1848 } else {
1849 bytes = count;
1850 if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size)
1851 bytes = (STp->buffer)->buffer_size;
1852 blks = bytes / STp->block_size;
1853 bytes = blks * STp->block_size;
1854 }
1855 }
1856
1857 memset(cmd, 0, MAX_COMMAND_SIZE);
1858 cmd[0] = READ_6;
1859 cmd[1] = (STp->block_size != 0);
1860 if (!cmd[1] && STp->sili)
1861 cmd[1] |= 2;
1862 cmd[2] = blks >> 16;
1863 cmd[3] = blks >> 8;
1864 cmd[4] = blks;
1865
1866 SRpnt = *aSRpnt;
1867 SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE,
1868 STp->device->request_queue->rq_timeout,
1869 MAX_RETRIES, 1);
1870 release_buffering(STp, 1);
1871 *aSRpnt = SRpnt;
1872 if (!SRpnt)
1873 return STbp->syscall_result;
1874
1875 STbp->read_pointer = 0;
1876 STps->at_sm = 0;
1877
1878 /* Something to check */
1879 if (STbp->syscall_result) {
1880 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1881
1882 retval = 1;
1883 DEBC(printk(ST_DEB_MSG "%s: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1884 name,
1885 SRpnt->sense[0], SRpnt->sense[1],
1886 SRpnt->sense[2], SRpnt->sense[3],
1887 SRpnt->sense[4], SRpnt->sense[5],
1888 SRpnt->sense[6], SRpnt->sense[7]));
1889 if (cmdstatp->have_sense) {
1890
1891 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
1892 cmdstatp->flags &= 0xcf; /* No need for EOM in this case */
1893
1894 if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */
1895 /* Compute the residual count */
1896 if (cmdstatp->remainder_valid)
1897 transfer = (int)cmdstatp->uremainder64;
1898 else
1899 transfer = 0;
1900 if (STp->block_size == 0 &&
1901 cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR)
1902 transfer = bytes;
1903
1904 if (cmdstatp->flags & SENSE_ILI) { /* ILI */
1905 if (STp->block_size == 0) {
1906 if (transfer <= 0) {
1907 if (transfer < 0)
1908 printk(KERN_NOTICE
1909 "%s: Failed to read %d byte block with %d byte transfer.\n",
1910 name, bytes - transfer, bytes);
1911 if (STps->drv_block >= 0)
1912 STps->drv_block += 1;
1913 STbp->buffer_bytes = 0;
1914 return (-ENOMEM);
1915 }
1916 STbp->buffer_bytes = bytes - transfer;
1917 } else {
1918 st_release_request(SRpnt);
1919 SRpnt = *aSRpnt = NULL;
1920 if (transfer == blks) { /* We did not get anything, error */
1921 printk(KERN_NOTICE "%s: Incorrect block size.\n", name);
1922 if (STps->drv_block >= 0)
1923 STps->drv_block += blks - transfer + 1;
1924 st_int_ioctl(STp, MTBSR, 1);
1925 return (-EIO);
1926 }
1927 /* We have some data, deliver it */
1928 STbp->buffer_bytes = (blks - transfer) *
1929 STp->block_size;
1930 DEBC(printk(ST_DEB_MSG
1931 "%s: ILI but enough data received %ld %d.\n",
1932 name, count, STbp->buffer_bytes));
1933 if (STps->drv_block >= 0)
1934 STps->drv_block += 1;
1935 if (st_int_ioctl(STp, MTBSR, 1))
1936 return (-EIO);
1937 }
1938 } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */
1939 if (STps->eof != ST_FM_HIT)
1940 STps->eof = ST_FM_HIT;
1941 else
1942 STps->eof = ST_EOD_2;
1943 if (STp->block_size == 0)
1944 STbp->buffer_bytes = 0;
1945 else
1946 STbp->buffer_bytes =
1947 bytes - transfer * STp->block_size;
1948 DEBC(printk(ST_DEB_MSG
1949 "%s: EOF detected (%d bytes read).\n",
1950 name, STbp->buffer_bytes));
1951 } else if (cmdstatp->flags & SENSE_EOM) {
1952 if (STps->eof == ST_FM)
1953 STps->eof = ST_EOD_1;
1954 else
1955 STps->eof = ST_EOM_OK;
1956 if (STp->block_size == 0)
1957 STbp->buffer_bytes = bytes - transfer;
1958 else
1959 STbp->buffer_bytes =
1960 bytes - transfer * STp->block_size;
1961
1962 DEBC(printk(ST_DEB_MSG "%s: EOM detected (%d bytes read).\n",
1963 name, STbp->buffer_bytes));
1964 }
1965 }
1966 /* end of EOF, EOM, ILI test */
1967 else { /* nonzero sense key */
1968 DEBC(printk(ST_DEB_MSG
1969 "%s: Tape error while reading.\n", name));
1970 STps->drv_block = (-1);
1971 if (STps->eof == ST_FM &&
1972 cmdstatp->sense_hdr.sense_key == BLANK_CHECK) {
1973 DEBC(printk(ST_DEB_MSG
1974 "%s: Zero returned for first BLANK CHECK after EOF.\n",
1975 name));
1976 STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */
1977 } else /* Some other extended sense code */
1978 retval = (-EIO);
1979 }
1980
1981 if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */
1982 STbp->buffer_bytes = 0;
1983 }
1984 /* End of extended sense test */
1985 else { /* Non-extended sense */
1986 retval = STbp->syscall_result;
1987 }
1988
1989 }
1990 /* End of error handling */
1991 else { /* Read successful */
1992 STbp->buffer_bytes = bytes;
1993 if (STp->sili) /* In fixed block mode residual is always zero here */
1994 STbp->buffer_bytes -= STp->buffer->cmdstat.residual;
1995 }
1996
1997 if (STps->drv_block >= 0) {
1998 if (STp->block_size == 0)
1999 STps->drv_block++;
2000 else
2001 STps->drv_block += STbp->buffer_bytes / STp->block_size;
2002 }
2003 return retval;
2004}
2005
2006
2007/* Read command */
2008static ssize_t
2009st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
2010{
2011 ssize_t total;
2012 ssize_t retval = 0;
2013 ssize_t i, transfer;
2014 int special, do_dio = 0;
2015 struct st_request *SRpnt = NULL;
2016 struct scsi_tape *STp = filp->private_data;
2017 struct st_modedef *STm;
2018 struct st_partstat *STps;
2019 struct st_buffer *STbp = STp->buffer;
2020 DEB( char *name = tape_name(STp); )
2021
2022 if (mutex_lock_interruptible(&STp->lock))
2023 return -ERESTARTSYS;
2024
2025 retval = rw_checks(STp, filp, count);
2026 if (retval || count == 0)
2027 goto out;
2028
2029 STm = &(STp->modes[STp->current_mode]);
2030 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
2031 if (!STm->do_read_ahead) {
2032 retval = (-EINVAL); /* Read must be integral number of blocks */
2033 goto out;
2034 }
2035 STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */
2036 }
2037
2038 STps = &(STp->ps[STp->partition]);
2039 if (STps->rw == ST_WRITING) {
2040 retval = flush_buffer(STp, 0);
2041 if (retval)
2042 goto out;
2043 STps->rw = ST_READING;
2044 }
2045 DEB(
2046 if (debugging && STps->eof != ST_NOEOF)
2047 printk(ST_DEB_MSG "%s: EOF/EOM flag up (%d). Bytes %d\n", name,
2048 STps->eof, STbp->buffer_bytes);
2049 ) /* end DEB */
2050
2051 retval = setup_buffering(STp, buf, count, 1);
2052 if (retval)
2053 goto out;
2054 do_dio = STbp->do_dio;
2055
2056 if (STbp->buffer_bytes == 0 &&
2057 STps->eof >= ST_EOD_1) {
2058 if (STps->eof < ST_EOD) {
2059 STps->eof += 1;
2060 retval = 0;
2061 goto out;
2062 }
2063 retval = (-EIO); /* EOM or Blank Check */
2064 goto out;
2065 }
2066
2067 if (do_dio) {
2068 /* Check the buffer writability before any tape movement. Don't alter
2069 buffer data. */
2070 if (copy_from_user(&i, buf, 1) != 0 ||
2071 copy_to_user(buf, &i, 1) != 0 ||
2072 copy_from_user(&i, buf + count - 1, 1) != 0 ||
2073 copy_to_user(buf + count - 1, &i, 1) != 0) {
2074 retval = (-EFAULT);
2075 goto out;
2076 }
2077 }
2078
2079 STps->rw = ST_READING;
2080
2081
2082 /* Loop until enough data in buffer or a special condition found */
2083 for (total = 0, special = 0; total < count && !special;) {
2084
2085 /* Get new data if the buffer is empty */
2086 if (STbp->buffer_bytes == 0) {
2087 special = read_tape(STp, count - total, &SRpnt);
2088 if (special < 0) { /* No need to continue read */
2089 retval = special;
2090 goto out;
2091 }
2092 }
2093
2094 /* Move the data from driver buffer to user buffer */
2095 if (STbp->buffer_bytes > 0) {
2096 DEB(
2097 if (debugging && STps->eof != ST_NOEOF)
2098 printk(ST_DEB_MSG
2099 "%s: EOF up (%d). Left %d, needed %d.\n", name,
2100 STps->eof, STbp->buffer_bytes,
2101 (int)(count - total));
2102 ) /* end DEB */
2103 transfer = STbp->buffer_bytes < count - total ?
2104 STbp->buffer_bytes : count - total;
2105 if (!do_dio) {
2106 i = from_buffer(STbp, buf, transfer);
2107 if (i) {
2108 retval = i;
2109 goto out;
2110 }
2111 }
2112 buf += transfer;
2113 total += transfer;
2114 }
2115
2116 if (STp->block_size == 0)
2117 break; /* Read only one variable length block */
2118
2119 } /* for (total = 0, special = 0;
2120 total < count && !special; ) */
2121
2122 /* Change the eof state if no data from tape or buffer */
2123 if (total == 0) {
2124 if (STps->eof == ST_FM_HIT) {
2125 STps->eof = ST_FM;
2126 STps->drv_block = 0;
2127 if (STps->drv_file >= 0)
2128 STps->drv_file++;
2129 } else if (STps->eof == ST_EOD_1) {
2130 STps->eof = ST_EOD_2;
2131 STps->drv_block = 0;
2132 if (STps->drv_file >= 0)
2133 STps->drv_file++;
2134 } else if (STps->eof == ST_EOD_2)
2135 STps->eof = ST_EOD;
2136 } else if (STps->eof == ST_FM)
2137 STps->eof = ST_NOEOF;
2138 retval = total;
2139
2140 out:
2141 if (SRpnt != NULL) {
2142 st_release_request(SRpnt);
2143 SRpnt = NULL;
2144 }
2145 if (do_dio) {
2146 release_buffering(STp, 1);
2147 STbp->buffer_bytes = 0;
2148 }
2149 mutex_unlock(&STp->lock);
2150
2151 return retval;
2152}
2153
2154
2155
2156DEB(
2157/* Set the driver options */
2158static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm, char *name)
2159{
2160 if (debugging) {
2161 printk(KERN_INFO
2162 "%s: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n",
2163 name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes,
2164 STm->do_read_ahead);
2165 printk(KERN_INFO
2166 "%s: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n",
2167 name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock);
2168 printk(KERN_INFO
2169 "%s: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n",
2170 name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
2171 STp->scsi2_logical);
2172 printk(KERN_INFO
2173 "%s: sysv: %d nowait: %d sili: %d\n", name, STm->sysv, STp->immediate,
2174 STp->sili);
2175 printk(KERN_INFO "%s: debugging: %d\n",
2176 name, debugging);
2177 }
2178}
2179 )
2180
2181
2182static int st_set_options(struct scsi_tape *STp, long options)
2183{
2184 int value;
2185 long code;
2186 struct st_modedef *STm;
2187 char *name = tape_name(STp);
2188 struct cdev *cd0, *cd1;
2189
2190 STm = &(STp->modes[STp->current_mode]);
2191 if (!STm->defined) {
2192 cd0 = STm->cdevs[0]; cd1 = STm->cdevs[1];
2193 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef));
2194 STm->cdevs[0] = cd0; STm->cdevs[1] = cd1;
2195 modes_defined = 1;
2196 DEBC(printk(ST_DEB_MSG
2197 "%s: Initialized mode %d definition from mode 0\n",
2198 name, STp->current_mode));
2199 }
2200
2201 code = options & MT_ST_OPTIONS;
2202 if (code == MT_ST_BOOLEANS) {
2203 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
2204 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
2205 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
2206 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
2207 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
2208 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
2209 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
2210 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
2211 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
2212 if ((STp->device)->scsi_level >= SCSI_2)
2213 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
2214 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
2215 STp->immediate = (options & MT_ST_NOWAIT) != 0;
2216 STm->sysv = (options & MT_ST_SYSV) != 0;
2217 STp->sili = (options & MT_ST_SILI) != 0;
2218 DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
2219 st_log_options(STp, STm, name); )
2220 } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
2221 value = (code == MT_ST_SETBOOLEANS);
2222 if ((options & MT_ST_BUFFER_WRITES) != 0)
2223 STm->do_buffer_writes = value;
2224 if ((options & MT_ST_ASYNC_WRITES) != 0)
2225 STm->do_async_writes = value;
2226 if ((options & MT_ST_DEF_WRITES) != 0)
2227 STm->defaults_for_writes = value;
2228 if ((options & MT_ST_READ_AHEAD) != 0)
2229 STm->do_read_ahead = value;
2230 if ((options & MT_ST_TWO_FM) != 0)
2231 STp->two_fm = value;
2232 if ((options & MT_ST_FAST_MTEOM) != 0)
2233 STp->fast_mteom = value;
2234 if ((options & MT_ST_AUTO_LOCK) != 0)
2235 STp->do_auto_lock = value;
2236 if ((options & MT_ST_CAN_BSR) != 0)
2237 STp->can_bsr = value;
2238 if ((options & MT_ST_NO_BLKLIMS) != 0)
2239 STp->omit_blklims = value;
2240 if ((STp->device)->scsi_level >= SCSI_2 &&
2241 (options & MT_ST_CAN_PARTITIONS) != 0)
2242 STp->can_partitions = value;
2243 if ((options & MT_ST_SCSI2LOGICAL) != 0)
2244 STp->scsi2_logical = value;
2245 if ((options & MT_ST_NOWAIT) != 0)
2246 STp->immediate = value;
2247 if ((options & MT_ST_SYSV) != 0)
2248 STm->sysv = value;
2249 if ((options & MT_ST_SILI) != 0)
2250 STp->sili = value;
2251 DEB(
2252 if ((options & MT_ST_DEBUGGING) != 0)
2253 debugging = value;
2254 st_log_options(STp, STm, name); )
2255 } else if (code == MT_ST_WRITE_THRESHOLD) {
2256 /* Retained for compatibility */
2257 } else if (code == MT_ST_DEF_BLKSIZE) {
2258 value = (options & ~MT_ST_OPTIONS);
2259 if (value == ~MT_ST_OPTIONS) {
2260 STm->default_blksize = (-1);
2261 DEBC( printk(KERN_INFO "%s: Default block size disabled.\n", name));
2262 } else {
2263 STm->default_blksize = value;
2264 DEBC( printk(KERN_INFO "%s: Default block size set to %d bytes.\n",
2265 name, STm->default_blksize));
2266 if (STp->ready == ST_READY) {
2267 STp->blksize_changed = 0;
2268 set_mode_densblk(STp, STm);
2269 }
2270 }
2271 } else if (code == MT_ST_TIMEOUTS) {
2272 value = (options & ~MT_ST_OPTIONS);
2273 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
2274 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
2275 DEBC( printk(KERN_INFO "%s: Long timeout set to %d seconds.\n", name,
2276 (value & ~MT_ST_SET_LONG_TIMEOUT)));
2277 } else {
2278 blk_queue_rq_timeout(STp->device->request_queue,
2279 value * HZ);
2280 DEBC( printk(KERN_INFO "%s: Normal timeout set to %d seconds.\n",
2281 name, value) );
2282 }
2283 } else if (code == MT_ST_SET_CLN) {
2284 value = (options & ~MT_ST_OPTIONS) & 0xff;
2285 if (value != 0 &&
2286 (value < EXTENDED_SENSE_START ||
2287 value >= SCSI_SENSE_BUFFERSIZE))
2288 return (-EINVAL);
2289 STp->cln_mode = value;
2290 STp->cln_sense_mask = (options >> 8) & 0xff;
2291 STp->cln_sense_value = (options >> 16) & 0xff;
2292 printk(KERN_INFO
2293 "%s: Cleaning request mode %d, mask %02x, value %02x\n",
2294 name, value, STp->cln_sense_mask, STp->cln_sense_value);
2295 } else if (code == MT_ST_DEF_OPTIONS) {
2296 code = (options & ~MT_ST_CLEAR_DEFAULT);
2297 value = (options & MT_ST_CLEAR_DEFAULT);
2298 if (code == MT_ST_DEF_DENSITY) {
2299 if (value == MT_ST_CLEAR_DEFAULT) {
2300 STm->default_density = (-1);
2301 DEBC( printk(KERN_INFO "%s: Density default disabled.\n",
2302 name));
2303 } else {
2304 STm->default_density = value & 0xff;
2305 DEBC( printk(KERN_INFO "%s: Density default set to %x\n",
2306 name, STm->default_density));
2307 if (STp->ready == ST_READY) {
2308 STp->density_changed = 0;
2309 set_mode_densblk(STp, STm);
2310 }
2311 }
2312 } else if (code == MT_ST_DEF_DRVBUFFER) {
2313 if (value == MT_ST_CLEAR_DEFAULT) {
2314 STp->default_drvbuffer = 0xff;
2315 DEBC( printk(KERN_INFO
2316 "%s: Drive buffer default disabled.\n", name));
2317 } else {
2318 STp->default_drvbuffer = value & 7;
2319 DEBC( printk(KERN_INFO
2320 "%s: Drive buffer default set to %x\n",
2321 name, STp->default_drvbuffer));
2322 if (STp->ready == ST_READY)
2323 st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer);
2324 }
2325 } else if (code == MT_ST_DEF_COMPRESSION) {
2326 if (value == MT_ST_CLEAR_DEFAULT) {
2327 STm->default_compression = ST_DONT_TOUCH;
2328 DEBC( printk(KERN_INFO
2329 "%s: Compression default disabled.\n", name));
2330 } else {
2331 if ((value & 0xff00) != 0) {
2332 STp->c_algo = (value & 0xff00) >> 8;
2333 DEBC( printk(KERN_INFO "%s: Compression algorithm set to 0x%x.\n",
2334 name, STp->c_algo));
2335 }
2336 if ((value & 0xff) != 0xff) {
2337 STm->default_compression = (value & 1 ? ST_YES : ST_NO);
2338 DEBC( printk(KERN_INFO "%s: Compression default set to %x\n",
2339 name, (value & 1)));
2340 if (STp->ready == ST_READY) {
2341 STp->compression_changed = 0;
2342 st_compression(STp, (STm->default_compression == ST_YES));
2343 }
2344 }
2345 }
2346 }
2347 } else
2348 return (-EIO);
2349
2350 return 0;
2351}
2352
2353#define MODE_HEADER_LENGTH 4
2354
2355/* Mode header and page byte offsets */
2356#define MH_OFF_DATA_LENGTH 0
2357#define MH_OFF_MEDIUM_TYPE 1
2358#define MH_OFF_DEV_SPECIFIC 2
2359#define MH_OFF_BDESCS_LENGTH 3
2360#define MP_OFF_PAGE_NBR 0
2361#define MP_OFF_PAGE_LENGTH 1
2362
2363/* Mode header and page bit masks */
2364#define MH_BIT_WP 0x80
2365#define MP_MSK_PAGE_NBR 0x3f
2366
2367/* Don't return block descriptors */
2368#define MODE_SENSE_OMIT_BDESCS 0x08
2369
2370#define MODE_SELECT_PAGE_FORMAT 0x10
2371
2372/* Read a mode page into the tape buffer. The block descriptors are included
2373 if incl_block_descs is true. The page control is ored to the page number
2374 parameter, if necessary. */
2375static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs)
2376{
2377 unsigned char cmd[MAX_COMMAND_SIZE];
2378 struct st_request *SRpnt;
2379
2380 memset(cmd, 0, MAX_COMMAND_SIZE);
2381 cmd[0] = MODE_SENSE;
2382 if (omit_block_descs)
2383 cmd[1] = MODE_SENSE_OMIT_BDESCS;
2384 cmd[2] = page;
2385 cmd[4] = 255;
2386
2387 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE,
2388 STp->device->request_queue->rq_timeout, 0, 1);
2389 if (SRpnt == NULL)
2390 return (STp->buffer)->syscall_result;
2391
2392 st_release_request(SRpnt);
2393
2394 return STp->buffer->syscall_result;
2395}
2396
2397
2398/* Send the mode page in the tape buffer to the drive. Assumes that the mode data
2399 in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */
2400static int write_mode_page(struct scsi_tape *STp, int page, int slow)
2401{
2402 int pgo;
2403 unsigned char cmd[MAX_COMMAND_SIZE];
2404 struct st_request *SRpnt;
2405 int timeout;
2406
2407 memset(cmd, 0, MAX_COMMAND_SIZE);
2408 cmd[0] = MODE_SELECT;
2409 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2410 pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH];
2411 cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2;
2412
2413 /* Clear reserved fields */
2414 (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0;
2415 (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0;
2416 (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP;
2417 (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR;
2418
2419 timeout = slow ?
2420 STp->long_timeout : STp->device->request_queue->rq_timeout;
2421 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE,
2422 timeout, 0, 1);
2423 if (SRpnt == NULL)
2424 return (STp->buffer)->syscall_result;
2425
2426 st_release_request(SRpnt);
2427
2428 return STp->buffer->syscall_result;
2429}
2430
2431
2432#define COMPRESSION_PAGE 0x0f
2433#define COMPRESSION_PAGE_LENGTH 16
2434
2435#define CP_OFF_DCE_DCC 2
2436#define CP_OFF_C_ALGO 7
2437
2438#define DCE_MASK 0x80
2439#define DCC_MASK 0x40
2440#define RED_MASK 0x60
2441
2442
2443/* Control the compression with mode page 15. Algorithm not changed if zero.
2444
2445 The block descriptors are read and written because Sony SDT-7000 does not
2446 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
2447 Including block descriptors should not cause any harm to other drives. */
2448
2449static int st_compression(struct scsi_tape * STp, int state)
2450{
2451 int retval;
2452 int mpoffs; /* Offset to mode page start */
2453 unsigned char *b_data = (STp->buffer)->b_data;
2454 DEB( char *name = tape_name(STp); )
2455
2456 if (STp->ready != ST_READY)
2457 return (-EIO);
2458
2459 /* Read the current page contents */
2460 retval = read_mode_page(STp, COMPRESSION_PAGE, 0);
2461 if (retval) {
2462 DEBC(printk(ST_DEB_MSG "%s: Compression mode page not supported.\n",
2463 name));
2464 return (-EIO);
2465 }
2466
2467 mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH];
2468 DEBC(printk(ST_DEB_MSG "%s: Compression state is %d.\n", name,
2469 (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0)));
2470
2471 /* Check if compression can be changed */
2472 if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) {
2473 DEBC(printk(ST_DEB_MSG "%s: Compression not supported.\n", name));
2474 return (-EIO);
2475 }
2476
2477 /* Do the change */
2478 if (state) {
2479 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK;
2480 if (STp->c_algo != 0)
2481 b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo;
2482 }
2483 else {
2484 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK;
2485 if (STp->c_algo != 0)
2486 b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */
2487 }
2488
2489 retval = write_mode_page(STp, COMPRESSION_PAGE, 0);
2490 if (retval) {
2491 DEBC(printk(ST_DEB_MSG "%s: Compression change failed.\n", name));
2492 return (-EIO);
2493 }
2494 DEBC(printk(ST_DEB_MSG "%s: Compression state changed to %d.\n",
2495 name, state));
2496
2497 STp->compression_changed = 1;
2498 return 0;
2499}
2500
2501
2502/* Process the load and unload commands (does unload if the load code is zero) */
2503static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code)
2504{
2505 int retval = (-EIO), timeout;
2506 DEB( char *name = tape_name(STp); )
2507 unsigned char cmd[MAX_COMMAND_SIZE];
2508 struct st_partstat *STps;
2509 struct st_request *SRpnt;
2510
2511 if (STp->ready != ST_READY && !load_code) {
2512 if (STp->ready == ST_NO_TAPE)
2513 return (-ENOMEDIUM);
2514 else
2515 return (-EIO);
2516 }
2517
2518 memset(cmd, 0, MAX_COMMAND_SIZE);
2519 cmd[0] = START_STOP;
2520 if (load_code)
2521 cmd[4] |= 1;
2522 /*
2523 * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A
2524 */
2525 if (load_code >= 1 + MT_ST_HPLOADER_OFFSET
2526 && load_code <= 6 + MT_ST_HPLOADER_OFFSET) {
2527 DEBC(printk(ST_DEB_MSG "%s: Enhanced %sload slot %2d.\n",
2528 name, (cmd[4]) ? "" : "un",
2529 load_code - MT_ST_HPLOADER_OFFSET));
2530 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */
2531 }
2532 if (STp->immediate) {
2533 cmd[1] = 1; /* Don't wait for completion */
2534 timeout = STp->device->request_queue->rq_timeout;
2535 }
2536 else
2537 timeout = STp->long_timeout;
2538
2539 DEBC(
2540 if (!load_code)
2541 printk(ST_DEB_MSG "%s: Unloading tape.\n", name);
2542 else
2543 printk(ST_DEB_MSG "%s: Loading tape.\n", name);
2544 );
2545
2546 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
2547 timeout, MAX_RETRIES, 1);
2548 if (!SRpnt)
2549 return (STp->buffer)->syscall_result;
2550
2551 retval = (STp->buffer)->syscall_result;
2552 st_release_request(SRpnt);
2553
2554 if (!retval) { /* SCSI command successful */
2555
2556 if (!load_code) {
2557 STp->rew_at_close = 0;
2558 STp->ready = ST_NO_TAPE;
2559 }
2560 else {
2561 STp->rew_at_close = STp->autorew_dev;
2562 retval = check_tape(STp, filp);
2563 if (retval > 0)
2564 retval = 0;
2565 }
2566 }
2567 else {
2568 STps = &(STp->ps[STp->partition]);
2569 STps->drv_file = STps->drv_block = (-1);
2570 }
2571
2572 return retval;
2573}
2574
2575#if DEBUG
2576#define ST_DEB_FORWARD 0
2577#define ST_DEB_BACKWARD 1
2578static void deb_space_print(char *name, int direction, char *units, unsigned char *cmd)
2579{
2580 s32 sc;
2581
2582 sc = cmd[2] & 0x80 ? 0xff000000 : 0;
2583 sc |= (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
2584 if (direction)
2585 sc = -sc;
2586 printk(ST_DEB_MSG "%s: Spacing tape %s over %d %s.\n", name,
2587 direction ? "backward" : "forward", sc, units);
2588}
2589#endif
2590
2591
2592/* Internal ioctl function */
2593static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg)
2594{
2595 int timeout;
2596 long ltmp;
2597 int ioctl_result;
2598 int chg_eof = 1;
2599 unsigned char cmd[MAX_COMMAND_SIZE];
2600 struct st_request *SRpnt;
2601 struct st_partstat *STps;
2602 int fileno, blkno, at_sm, undone;
2603 int datalen = 0, direction = DMA_NONE;
2604 char *name = tape_name(STp);
2605
2606 WARN_ON(STp->buffer->do_dio != 0);
2607 if (STp->ready != ST_READY) {
2608 if (STp->ready == ST_NO_TAPE)
2609 return (-ENOMEDIUM);
2610 else
2611 return (-EIO);
2612 }
2613 timeout = STp->long_timeout;
2614 STps = &(STp->ps[STp->partition]);
2615 fileno = STps->drv_file;
2616 blkno = STps->drv_block;
2617 at_sm = STps->at_sm;
2618
2619 memset(cmd, 0, MAX_COMMAND_SIZE);
2620 switch (cmd_in) {
2621 case MTFSFM:
2622 chg_eof = 0; /* Changed from the FSF after this */
2623 case MTFSF:
2624 cmd[0] = SPACE;
2625 cmd[1] = 0x01; /* Space FileMarks */
2626 cmd[2] = (arg >> 16);
2627 cmd[3] = (arg >> 8);
2628 cmd[4] = arg;
2629 DEBC(deb_space_print(name, ST_DEB_FORWARD, "filemarks", cmd);)
2630 if (fileno >= 0)
2631 fileno += arg;
2632 blkno = 0;
2633 at_sm &= (arg == 0);
2634 break;
2635 case MTBSFM:
2636 chg_eof = 0; /* Changed from the FSF after this */
2637 case MTBSF:
2638 cmd[0] = SPACE;
2639 cmd[1] = 0x01; /* Space FileMarks */
2640 ltmp = (-arg);
2641 cmd[2] = (ltmp >> 16);
2642 cmd[3] = (ltmp >> 8);
2643 cmd[4] = ltmp;
2644 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "filemarks", cmd);)
2645 if (fileno >= 0)
2646 fileno -= arg;
2647 blkno = (-1); /* We can't know the block number */
2648 at_sm &= (arg == 0);
2649 break;
2650 case MTFSR:
2651 cmd[0] = SPACE;
2652 cmd[1] = 0x00; /* Space Blocks */
2653 cmd[2] = (arg >> 16);
2654 cmd[3] = (arg >> 8);
2655 cmd[4] = arg;
2656 DEBC(deb_space_print(name, ST_DEB_FORWARD, "blocks", cmd);)
2657 if (blkno >= 0)
2658 blkno += arg;
2659 at_sm &= (arg == 0);
2660 break;
2661 case MTBSR:
2662 cmd[0] = SPACE;
2663 cmd[1] = 0x00; /* Space Blocks */
2664 ltmp = (-arg);
2665 cmd[2] = (ltmp >> 16);
2666 cmd[3] = (ltmp >> 8);
2667 cmd[4] = ltmp;
2668 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "blocks", cmd);)
2669 if (blkno >= 0)
2670 blkno -= arg;
2671 at_sm &= (arg == 0);
2672 break;
2673 case MTFSS:
2674 cmd[0] = SPACE;
2675 cmd[1] = 0x04; /* Space Setmarks */
2676 cmd[2] = (arg >> 16);
2677 cmd[3] = (arg >> 8);
2678 cmd[4] = arg;
2679 DEBC(deb_space_print(name, ST_DEB_FORWARD, "setmarks", cmd);)
2680 if (arg != 0) {
2681 blkno = fileno = (-1);
2682 at_sm = 1;
2683 }
2684 break;
2685 case MTBSS:
2686 cmd[0] = SPACE;
2687 cmd[1] = 0x04; /* Space Setmarks */
2688 ltmp = (-arg);
2689 cmd[2] = (ltmp >> 16);
2690 cmd[3] = (ltmp >> 8);
2691 cmd[4] = ltmp;
2692 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "setmarks", cmd);)
2693 if (arg != 0) {
2694 blkno = fileno = (-1);
2695 at_sm = 1;
2696 }
2697 break;
2698 case MTWEOF:
2699 case MTWEOFI:
2700 case MTWSM:
2701 if (STp->write_prot)
2702 return (-EACCES);
2703 cmd[0] = WRITE_FILEMARKS;
2704 if (cmd_in == MTWSM)
2705 cmd[1] = 2;
2706 if (cmd_in == MTWEOFI)
2707 cmd[1] |= 1;
2708 cmd[2] = (arg >> 16);
2709 cmd[3] = (arg >> 8);
2710 cmd[4] = arg;
2711 timeout = STp->device->request_queue->rq_timeout;
2712 DEBC(
2713 if (cmd_in != MTWSM)
2714 printk(ST_DEB_MSG "%s: Writing %d filemarks.\n", name,
2715 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
2716 else
2717 printk(ST_DEB_MSG "%s: Writing %d setmarks.\n", name,
2718 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
2719 )
2720 if (fileno >= 0)
2721 fileno += arg;
2722 blkno = 0;
2723 at_sm = (cmd_in == MTWSM);
2724 break;
2725 case MTREW:
2726 cmd[0] = REZERO_UNIT;
2727 if (STp->immediate) {
2728 cmd[1] = 1; /* Don't wait for completion */
2729 timeout = STp->device->request_queue->rq_timeout;
2730 }
2731 DEBC(printk(ST_DEB_MSG "%s: Rewinding tape.\n", name));
2732 fileno = blkno = at_sm = 0;
2733 break;
2734 case MTNOP:
2735 DEBC(printk(ST_DEB_MSG "%s: No op on tape.\n", name));
2736 return 0; /* Should do something ? */
2737 break;
2738 case MTRETEN:
2739 cmd[0] = START_STOP;
2740 if (STp->immediate) {
2741 cmd[1] = 1; /* Don't wait for completion */
2742 timeout = STp->device->request_queue->rq_timeout;
2743 }
2744 cmd[4] = 3;
2745 DEBC(printk(ST_DEB_MSG "%s: Retensioning tape.\n", name));
2746 fileno = blkno = at_sm = 0;
2747 break;
2748 case MTEOM:
2749 if (!STp->fast_mteom) {
2750 /* space to the end of tape */
2751 ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff);
2752 fileno = STps->drv_file;
2753 if (STps->eof >= ST_EOD_1)
2754 return 0;
2755 /* The next lines would hide the number of spaced FileMarks
2756 That's why I inserted the previous lines. I had no luck
2757 with detecting EOM with FSF, so we go now to EOM.
2758 Joerg Weule */
2759 } else
2760 fileno = (-1);
2761 cmd[0] = SPACE;
2762 cmd[1] = 3;
2763 DEBC(printk(ST_DEB_MSG "%s: Spacing to end of recorded medium.\n",
2764 name));
2765 blkno = -1;
2766 at_sm = 0;
2767 break;
2768 case MTERASE:
2769 if (STp->write_prot)
2770 return (-EACCES);
2771 cmd[0] = ERASE;
2772 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */
2773 if (STp->immediate) {
2774 cmd[1] |= 2; /* Don't wait for completion */
2775 timeout = STp->device->request_queue->rq_timeout;
2776 }
2777 else
2778 timeout = STp->long_timeout * 8;
2779
2780 DEBC(printk(ST_DEB_MSG "%s: Erasing tape.\n", name));
2781 fileno = blkno = at_sm = 0;
2782 break;
2783 case MTSETBLK: /* Set block length */
2784 case MTSETDENSITY: /* Set tape density */
2785 case MTSETDRVBUFFER: /* Set drive buffering */
2786 case SET_DENS_AND_BLK: /* Set density and block size */
2787 chg_eof = 0;
2788 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
2789 return (-EIO); /* Not allowed if data in buffer */
2790 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
2791 (arg & MT_ST_BLKSIZE_MASK) != 0 &&
2792 STp->max_block > 0 &&
2793 ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block ||
2794 (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) {
2795 printk(KERN_WARNING "%s: Illegal block size.\n", name);
2796 return (-EINVAL);
2797 }
2798 cmd[0] = MODE_SELECT;
2799 if ((STp->use_pf & USE_PF))
2800 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2801 cmd[4] = datalen = 12;
2802 direction = DMA_TO_DEVICE;
2803
2804 memset((STp->buffer)->b_data, 0, 12);
2805 if (cmd_in == MTSETDRVBUFFER)
2806 (STp->buffer)->b_data[2] = (arg & 7) << 4;
2807 else
2808 (STp->buffer)->b_data[2] =
2809 STp->drv_buffer << 4;
2810 (STp->buffer)->b_data[3] = 8; /* block descriptor length */
2811 if (cmd_in == MTSETDENSITY) {
2812 (STp->buffer)->b_data[4] = arg;
2813 STp->density_changed = 1; /* At least we tried ;-) */
2814 } else if (cmd_in == SET_DENS_AND_BLK)
2815 (STp->buffer)->b_data[4] = arg >> 24;
2816 else
2817 (STp->buffer)->b_data[4] = STp->density;
2818 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2819 ltmp = arg & MT_ST_BLKSIZE_MASK;
2820 if (cmd_in == MTSETBLK)
2821 STp->blksize_changed = 1; /* At least we tried ;-) */
2822 } else
2823 ltmp = STp->block_size;
2824 (STp->buffer)->b_data[9] = (ltmp >> 16);
2825 (STp->buffer)->b_data[10] = (ltmp >> 8);
2826 (STp->buffer)->b_data[11] = ltmp;
2827 timeout = STp->device->request_queue->rq_timeout;
2828 DEBC(
2829 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK)
2830 printk(ST_DEB_MSG
2831 "%s: Setting block size to %d bytes.\n", name,
2832 (STp->buffer)->b_data[9] * 65536 +
2833 (STp->buffer)->b_data[10] * 256 +
2834 (STp->buffer)->b_data[11]);
2835 if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK)
2836 printk(ST_DEB_MSG
2837 "%s: Setting density code to %x.\n", name,
2838 (STp->buffer)->b_data[4]);
2839 if (cmd_in == MTSETDRVBUFFER)
2840 printk(ST_DEB_MSG
2841 "%s: Setting drive buffer code to %d.\n", name,
2842 ((STp->buffer)->b_data[2] >> 4) & 7);
2843 )
2844 break;
2845 default:
2846 return (-ENOSYS);
2847 }
2848
2849 SRpnt = st_do_scsi(NULL, STp, cmd, datalen, direction,
2850 timeout, MAX_RETRIES, 1);
2851 if (!SRpnt)
2852 return (STp->buffer)->syscall_result;
2853
2854 ioctl_result = (STp->buffer)->syscall_result;
2855
2856 if (!ioctl_result) { /* SCSI command successful */
2857 st_release_request(SRpnt);
2858 SRpnt = NULL;
2859 STps->drv_block = blkno;
2860 STps->drv_file = fileno;
2861 STps->at_sm = at_sm;
2862
2863 if (cmd_in == MTBSFM)
2864 ioctl_result = st_int_ioctl(STp, MTFSF, 1);
2865 else if (cmd_in == MTFSFM)
2866 ioctl_result = st_int_ioctl(STp, MTBSF, 1);
2867
2868 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2869 STp->block_size = arg & MT_ST_BLKSIZE_MASK;
2870 if (STp->block_size != 0) {
2871 (STp->buffer)->buffer_blocks =
2872 (STp->buffer)->buffer_size / STp->block_size;
2873 }
2874 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
2875 if (cmd_in == SET_DENS_AND_BLK)
2876 STp->density = arg >> MT_ST_DENSITY_SHIFT;
2877 } else if (cmd_in == MTSETDRVBUFFER)
2878 STp->drv_buffer = (arg & 7);
2879 else if (cmd_in == MTSETDENSITY)
2880 STp->density = arg;
2881
2882 if (cmd_in == MTEOM)
2883 STps->eof = ST_EOD;
2884 else if (cmd_in == MTFSF)
2885 STps->eof = ST_FM;
2886 else if (chg_eof)
2887 STps->eof = ST_NOEOF;
2888
2889 if (cmd_in == MTWEOF || cmd_in == MTWEOFI)
2890 STps->rw = ST_IDLE; /* prevent automatic WEOF at close */
2891 } else { /* SCSI command was not completely successful. Don't return
2892 from this block without releasing the SCSI command block! */
2893 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
2894
2895 if (cmdstatp->flags & SENSE_EOM) {
2896 if (cmd_in != MTBSF && cmd_in != MTBSFM &&
2897 cmd_in != MTBSR && cmd_in != MTBSS)
2898 STps->eof = ST_EOM_OK;
2899 STps->drv_block = 0;
2900 }
2901
2902 if (cmdstatp->remainder_valid)
2903 undone = (int)cmdstatp->uremainder64;
2904 else
2905 undone = 0;
2906
2907 if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) &&
2908 cmdstatp->have_sense &&
2909 (cmdstatp->flags & SENSE_EOM)) {
2910 if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
2911 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) {
2912 ioctl_result = 0; /* EOF(s) written successfully at EOM */
2913 STps->eof = ST_NOEOF;
2914 } else { /* Writing EOF(s) failed */
2915 if (fileno >= 0)
2916 fileno -= undone;
2917 if (undone < arg)
2918 STps->eof = ST_NOEOF;
2919 }
2920 STps->drv_file = fileno;
2921 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) {
2922 if (fileno >= 0)
2923 STps->drv_file = fileno - undone;
2924 else
2925 STps->drv_file = fileno;
2926 STps->drv_block = -1;
2927 STps->eof = ST_NOEOF;
2928 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) {
2929 if (arg > 0 && undone < 0) /* Some drives get this wrong */
2930 undone = (-undone);
2931 if (STps->drv_file >= 0)
2932 STps->drv_file = fileno + undone;
2933 STps->drv_block = 0;
2934 STps->eof = ST_NOEOF;
2935 } else if (cmd_in == MTFSR) {
2936 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
2937 if (STps->drv_file >= 0)
2938 STps->drv_file++;
2939 STps->drv_block = 0;
2940 STps->eof = ST_FM;
2941 } else {
2942 if (blkno >= undone)
2943 STps->drv_block = blkno - undone;
2944 else
2945 STps->drv_block = (-1);
2946 STps->eof = ST_NOEOF;
2947 }
2948 } else if (cmd_in == MTBSR) {
2949 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
2950 STps->drv_file--;
2951 STps->drv_block = (-1);
2952 } else {
2953 if (arg > 0 && undone < 0) /* Some drives get this wrong */
2954 undone = (-undone);
2955 if (STps->drv_block >= 0)
2956 STps->drv_block = blkno + undone;
2957 }
2958 STps->eof = ST_NOEOF;
2959 } else if (cmd_in == MTEOM) {
2960 STps->drv_file = (-1);
2961 STps->drv_block = (-1);
2962 STps->eof = ST_EOD;
2963 } else if (cmd_in == MTSETBLK ||
2964 cmd_in == MTSETDENSITY ||
2965 cmd_in == MTSETDRVBUFFER ||
2966 cmd_in == SET_DENS_AND_BLK) {
2967 if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
2968 !(STp->use_pf & PF_TESTED)) {
2969 /* Try the other possible state of Page Format if not
2970 already tried */
2971 STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
2972 st_release_request(SRpnt);
2973 SRpnt = NULL;
2974 return st_int_ioctl(STp, cmd_in, arg);
2975 }
2976 } else if (chg_eof)
2977 STps->eof = ST_NOEOF;
2978
2979 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
2980 STps->eof = ST_EOD;
2981
2982 st_release_request(SRpnt);
2983 SRpnt = NULL;
2984 }
2985
2986 return ioctl_result;
2987}
2988
2989
2990/* Get the tape position. If bt == 2, arg points into a kernel space mt_loc
2991 structure. */
2992
2993static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition,
2994 int logical)
2995{
2996 int result;
2997 unsigned char scmd[MAX_COMMAND_SIZE];
2998 struct st_request *SRpnt;
2999 DEB( char *name = tape_name(STp); )
3000
3001 if (STp->ready != ST_READY)
3002 return (-EIO);
3003
3004 memset(scmd, 0, MAX_COMMAND_SIZE);
3005 if ((STp->device)->scsi_level < SCSI_2) {
3006 scmd[0] = QFA_REQUEST_BLOCK;
3007 scmd[4] = 3;
3008 } else {
3009 scmd[0] = READ_POSITION;
3010 if (!logical && !STp->scsi2_logical)
3011 scmd[1] = 1;
3012 }
3013 SRpnt = st_do_scsi(NULL, STp, scmd, 20, DMA_FROM_DEVICE,
3014 STp->device->request_queue->rq_timeout,
3015 MAX_READY_RETRIES, 1);
3016 if (!SRpnt)
3017 return (STp->buffer)->syscall_result;
3018
3019 if ((STp->buffer)->syscall_result != 0 ||
3020 (STp->device->scsi_level >= SCSI_2 &&
3021 ((STp->buffer)->b_data[0] & 4) != 0)) {
3022 *block = *partition = 0;
3023 DEBC(printk(ST_DEB_MSG "%s: Can't read tape position.\n", name));
3024 result = (-EIO);
3025 } else {
3026 result = 0;
3027 if ((STp->device)->scsi_level < SCSI_2) {
3028 *block = ((STp->buffer)->b_data[0] << 16)
3029 + ((STp->buffer)->b_data[1] << 8)
3030 + (STp->buffer)->b_data[2];
3031 *partition = 0;
3032 } else {
3033 *block = ((STp->buffer)->b_data[4] << 24)
3034 + ((STp->buffer)->b_data[5] << 16)
3035 + ((STp->buffer)->b_data[6] << 8)
3036 + (STp->buffer)->b_data[7];
3037 *partition = (STp->buffer)->b_data[1];
3038 if (((STp->buffer)->b_data[0] & 0x80) &&
3039 (STp->buffer)->b_data[1] == 0) /* BOP of partition 0 */
3040 STp->ps[0].drv_block = STp->ps[0].drv_file = 0;
3041 }
3042 DEBC(printk(ST_DEB_MSG "%s: Got tape pos. blk %d part %d.\n", name,
3043 *block, *partition));
3044 }
3045 st_release_request(SRpnt);
3046 SRpnt = NULL;
3047
3048 return result;
3049}
3050
3051
3052/* Set the tape block and partition. Negative partition means that only the
3053 block should be set in vendor specific way. */
3054static int set_location(struct scsi_tape *STp, unsigned int block, int partition,
3055 int logical)
3056{
3057 struct st_partstat *STps;
3058 int result, p;
3059 unsigned int blk;
3060 int timeout;
3061 unsigned char scmd[MAX_COMMAND_SIZE];
3062 struct st_request *SRpnt;
3063 DEB( char *name = tape_name(STp); )
3064
3065 if (STp->ready != ST_READY)
3066 return (-EIO);
3067 timeout = STp->long_timeout;
3068 STps = &(STp->ps[STp->partition]);
3069
3070 DEBC(printk(ST_DEB_MSG "%s: Setting block to %d and partition to %d.\n",
3071 name, block, partition));
3072 DEB(if (partition < 0)
3073 return (-EIO); )
3074
3075 /* Update the location at the partition we are leaving */
3076 if ((!STp->can_partitions && partition != 0) ||
3077 partition >= ST_NBR_PARTITIONS)
3078 return (-EINVAL);
3079 if (partition != STp->partition) {
3080 if (get_location(STp, &blk, &p, 1))
3081 STps->last_block_valid = 0;
3082 else {
3083 STps->last_block_valid = 1;
3084 STps->last_block_visited = blk;
3085 DEBC(printk(ST_DEB_MSG
3086 "%s: Visited block %d for partition %d saved.\n",
3087 name, blk, STp->partition));
3088 }
3089 }
3090
3091 memset(scmd, 0, MAX_COMMAND_SIZE);
3092 if ((STp->device)->scsi_level < SCSI_2) {
3093 scmd[0] = QFA_SEEK_BLOCK;
3094 scmd[2] = (block >> 16);
3095 scmd[3] = (block >> 8);
3096 scmd[4] = block;
3097 scmd[5] = 0;
3098 } else {
3099 scmd[0] = SEEK_10;
3100 scmd[3] = (block >> 24);
3101 scmd[4] = (block >> 16);
3102 scmd[5] = (block >> 8);
3103 scmd[6] = block;
3104 if (!logical && !STp->scsi2_logical)
3105 scmd[1] = 4;
3106 if (STp->partition != partition) {
3107 scmd[1] |= 2;
3108 scmd[8] = partition;
3109 DEBC(printk(ST_DEB_MSG
3110 "%s: Trying to change partition from %d to %d\n",
3111 name, STp->partition, partition));
3112 }
3113 }
3114 if (STp->immediate) {
3115 scmd[1] |= 1; /* Don't wait for completion */
3116 timeout = STp->device->request_queue->rq_timeout;
3117 }
3118
3119 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3120 timeout, MAX_READY_RETRIES, 1);
3121 if (!SRpnt)
3122 return (STp->buffer)->syscall_result;
3123
3124 STps->drv_block = STps->drv_file = (-1);
3125 STps->eof = ST_NOEOF;
3126 if ((STp->buffer)->syscall_result != 0) {
3127 result = (-EIO);
3128 if (STp->can_partitions &&
3129 (STp->device)->scsi_level >= SCSI_2 &&
3130 (p = find_partition(STp)) >= 0)
3131 STp->partition = p;
3132 } else {
3133 if (STp->can_partitions) {
3134 STp->partition = partition;
3135 STps = &(STp->ps[partition]);
3136 if (!STps->last_block_valid ||
3137 STps->last_block_visited != block) {
3138 STps->at_sm = 0;
3139 STps->rw = ST_IDLE;
3140 }
3141 } else
3142 STps->at_sm = 0;
3143 if (block == 0)
3144 STps->drv_block = STps->drv_file = 0;
3145 result = 0;
3146 }
3147
3148 st_release_request(SRpnt);
3149 SRpnt = NULL;
3150
3151 return result;
3152}
3153
3154
3155/* Find the current partition number for the drive status. Called from open and
3156 returns either partition number of negative error code. */
3157static int find_partition(struct scsi_tape *STp)
3158{
3159 int i, partition;
3160 unsigned int block;
3161
3162 if ((i = get_location(STp, &block, &partition, 1)) < 0)
3163 return i;
3164 if (partition >= ST_NBR_PARTITIONS)
3165 return (-EIO);
3166 return partition;
3167}
3168
3169
3170/* Change the partition if necessary */
3171static int switch_partition(struct scsi_tape *STp)
3172{
3173 struct st_partstat *STps;
3174
3175 if (STp->partition == STp->new_partition)
3176 return 0;
3177 STps = &(STp->ps[STp->new_partition]);
3178 if (!STps->last_block_valid)
3179 STps->last_block_visited = 0;
3180 return set_location(STp, STps->last_block_visited, STp->new_partition, 1);
3181}
3182
3183/* Functions for reading and writing the medium partition mode page. */
3184
3185#define PART_PAGE 0x11
3186#define PART_PAGE_FIXED_LENGTH 8
3187
3188#define PP_OFF_MAX_ADD_PARTS 2
3189#define PP_OFF_NBR_ADD_PARTS 3
3190#define PP_OFF_FLAGS 4
3191#define PP_OFF_PART_UNITS 6
3192#define PP_OFF_RESERVED 7
3193
3194#define PP_BIT_IDP 0x20
3195#define PP_MSK_PSUM_MB 0x10
3196
3197/* Get the number of partitions on the tape. As a side effect reads the
3198 mode page into the tape buffer. */
3199static int nbr_partitions(struct scsi_tape *STp)
3200{
3201 int result;
3202 DEB( char *name = tape_name(STp); )
3203
3204 if (STp->ready != ST_READY)
3205 return (-EIO);
3206
3207 result = read_mode_page(STp, PART_PAGE, 1);
3208
3209 if (result) {
3210 DEBC(printk(ST_DEB_MSG "%s: Can't read medium partition page.\n",
3211 name));
3212 result = (-EIO);
3213 } else {
3214 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH +
3215 PP_OFF_NBR_ADD_PARTS] + 1;
3216 DEBC(printk(ST_DEB_MSG "%s: Number of partitions %d.\n", name, result));
3217 }
3218
3219 return result;
3220}
3221
3222
3223/* Partition the tape into two partitions if size > 0 or one partition if
3224 size == 0.
3225
3226 The block descriptors are read and written because Sony SDT-7000 does not
3227 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
3228
3229 My HP C1533A drive returns only one partition size field. This is used to
3230 set the size of partition 1. There is no size field for the default partition.
3231 Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is
3232 used to set the size of partition 1 (this is what the SCSI-3 standard specifies).
3233 The following algorithm is used to accommodate both drives: if the number of
3234 partition size fields is greater than the maximum number of additional partitions
3235 in the mode page, the second field is used. Otherwise the first field is used.
3236
3237 For Seagate DDS drives the page length must be 8 when no partitions is defined
3238 and 10 when 1 partition is defined (information from Eric Lee Green). This is
3239 is acceptable also to some other old drives and enforced if the first partition
3240 size field is used for the first additional partition size.
3241 */
3242static int partition_tape(struct scsi_tape *STp, int size)
3243{
3244 char *name = tape_name(STp);
3245 int result;
3246 int pgo, psd_cnt, psdo;
3247 unsigned char *bp;
3248
3249 result = read_mode_page(STp, PART_PAGE, 0);
3250 if (result) {
3251 DEBC(printk(ST_DEB_MSG "%s: Can't read partition mode page.\n", name));
3252 return result;
3253 }
3254 /* The mode page is in the buffer. Let's modify it and write it. */
3255 bp = (STp->buffer)->b_data;
3256 pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH];
3257 DEBC(printk(ST_DEB_MSG "%s: Partition page length is %d bytes.\n",
3258 name, bp[pgo + MP_OFF_PAGE_LENGTH] + 2));
3259
3260 psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2;
3261 psdo = pgo + PART_PAGE_FIXED_LENGTH;
3262 if (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS]) {
3263 bp[psdo] = bp[psdo + 1] = 0xff; /* Rest of the tape */
3264 psdo += 2;
3265 }
3266 memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2);
3267
3268 DEBC(printk("%s: psd_cnt %d, max.parts %d, nbr_parts %d\n", name,
3269 psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS],
3270 bp[pgo + PP_OFF_NBR_ADD_PARTS]));
3271
3272 if (size <= 0) {
3273 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0;
3274 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS])
3275 bp[pgo + MP_OFF_PAGE_LENGTH] = 6;
3276 DEBC(printk(ST_DEB_MSG "%s: Formatting tape with one partition.\n",
3277 name));
3278 } else {
3279 bp[psdo] = (size >> 8) & 0xff;
3280 bp[psdo + 1] = size & 0xff;
3281 bp[pgo + 3] = 1;
3282 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8)
3283 bp[pgo + MP_OFF_PAGE_LENGTH] = 8;
3284 DEBC(printk(ST_DEB_MSG
3285 "%s: Formatting tape with two partitions (1 = %d MB).\n",
3286 name, size));
3287 }
3288 bp[pgo + PP_OFF_PART_UNITS] = 0;
3289 bp[pgo + PP_OFF_RESERVED] = 0;
3290 bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | PP_MSK_PSUM_MB;
3291
3292 result = write_mode_page(STp, PART_PAGE, 1);
3293 if (result) {
3294 printk(KERN_INFO "%s: Partitioning of tape failed.\n", name);
3295 result = (-EIO);
3296 }
3297
3298 return result;
3299}
3300
3301
3302
3303/* The ioctl command */
3304static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3305{
3306 int i, cmd_nr, cmd_type, bt;
3307 int retval = 0;
3308 unsigned int blk;
3309 struct scsi_tape *STp = file->private_data;
3310 struct st_modedef *STm;
3311 struct st_partstat *STps;
3312 char *name = tape_name(STp);
3313 void __user *p = (void __user *)arg;
3314
3315 if (mutex_lock_interruptible(&STp->lock))
3316 return -ERESTARTSYS;
3317
3318 DEB(
3319 if (debugging && !STp->in_use) {
3320 printk(ST_DEB_MSG "%s: Incorrect device.\n", name);
3321 retval = (-EIO);
3322 goto out;
3323 } ) /* end DEB */
3324
3325 STm = &(STp->modes[STp->current_mode]);
3326 STps = &(STp->ps[STp->partition]);
3327
3328 /*
3329 * If we are in the middle of error recovery, don't let anyone
3330 * else try and use this device. Also, if error recovery fails, it
3331 * may try and take the device offline, in which case all further
3332 * access to the device is prohibited.
3333 */
3334 retval = scsi_nonblockable_ioctl(STp->device, cmd_in, p,
3335 file->f_flags & O_NDELAY);
3336 if (!scsi_block_when_processing_errors(STp->device) || retval != -ENODEV)
3337 goto out;
3338 retval = 0;
3339
3340 cmd_type = _IOC_TYPE(cmd_in);
3341 cmd_nr = _IOC_NR(cmd_in);
3342
3343 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
3344 struct mtop mtc;
3345
3346 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
3347 retval = (-EINVAL);
3348 goto out;
3349 }
3350
3351 i = copy_from_user(&mtc, p, sizeof(struct mtop));
3352 if (i) {
3353 retval = (-EFAULT);
3354 goto out;
3355 }
3356
3357 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
3358 printk(KERN_WARNING
3359 "%s: MTSETDRVBUFFER only allowed for root.\n", name);
3360 retval = (-EPERM);
3361 goto out;
3362 }
3363 if (!STm->defined &&
3364 (mtc.mt_op != MTSETDRVBUFFER &&
3365 (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
3366 retval = (-ENXIO);
3367 goto out;
3368 }
3369
3370 if (!STp->pos_unknown) {
3371
3372 if (STps->eof == ST_FM_HIT) {
3373 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3374 mtc.mt_op == MTEOM) {
3375 mtc.mt_count -= 1;
3376 if (STps->drv_file >= 0)
3377 STps->drv_file += 1;
3378 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
3379 mtc.mt_count += 1;
3380 if (STps->drv_file >= 0)
3381 STps->drv_file += 1;
3382 }
3383 }
3384
3385 if (mtc.mt_op == MTSEEK) {
3386 /* Old position must be restored if partition will be
3387 changed */
3388 i = !STp->can_partitions ||
3389 (STp->new_partition != STp->partition);
3390 } else {
3391 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3392 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
3393 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
3394 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3395 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
3396 mtc.mt_op == MTCOMPRESSION;
3397 }
3398 i = flush_buffer(STp, i);
3399 if (i < 0) {
3400 retval = i;
3401 goto out;
3402 }
3403 if (STps->rw == ST_WRITING &&
3404 (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3405 mtc.mt_op == MTSEEK ||
3406 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) {
3407 i = st_int_ioctl(STp, MTWEOF, 1);
3408 if (i < 0) {
3409 retval = i;
3410 goto out;
3411 }
3412 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)
3413 mtc.mt_count++;
3414 STps->rw = ST_IDLE;
3415 }
3416
3417 } else {
3418 /*
3419 * If there was a bus reset, block further access
3420 * to this device. If the user wants to rewind the tape,
3421 * then reset the flag and allow access again.
3422 */
3423 if (mtc.mt_op != MTREW &&
3424 mtc.mt_op != MTOFFL &&
3425 mtc.mt_op != MTRETEN &&
3426 mtc.mt_op != MTERASE &&
3427 mtc.mt_op != MTSEEK &&
3428 mtc.mt_op != MTEOM) {
3429 retval = (-EIO);
3430 goto out;
3431 }
3432 reset_state(STp);
3433 /* remove this when the midlevel properly clears was_reset */
3434 STp->device->was_reset = 0;
3435 }
3436
3437 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
3438 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM &&
3439 mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART)
3440 STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */
3441
3442 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
3443 do_door_lock(STp, 0); /* Ignore result! */
3444
3445 if (mtc.mt_op == MTSETDRVBUFFER &&
3446 (mtc.mt_count & MT_ST_OPTIONS) != 0) {
3447 retval = st_set_options(STp, mtc.mt_count);
3448 goto out;
3449 }
3450
3451 if (mtc.mt_op == MTSETPART) {
3452 if (!STp->can_partitions ||
3453 mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) {
3454 retval = (-EINVAL);
3455 goto out;
3456 }
3457 if (mtc.mt_count >= STp->nbr_partitions &&
3458 (STp->nbr_partitions = nbr_partitions(STp)) < 0) {
3459 retval = (-EIO);
3460 goto out;
3461 }
3462 if (mtc.mt_count >= STp->nbr_partitions) {
3463 retval = (-EINVAL);
3464 goto out;
3465 }
3466 STp->new_partition = mtc.mt_count;
3467 retval = 0;
3468 goto out;
3469 }
3470
3471 if (mtc.mt_op == MTMKPART) {
3472 if (!STp->can_partitions) {
3473 retval = (-EINVAL);
3474 goto out;
3475 }
3476 if ((i = st_int_ioctl(STp, MTREW, 0)) < 0 ||
3477 (i = partition_tape(STp, mtc.mt_count)) < 0) {
3478 retval = i;
3479 goto out;
3480 }
3481 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3482 STp->ps[i].rw = ST_IDLE;
3483 STp->ps[i].at_sm = 0;
3484 STp->ps[i].last_block_valid = 0;
3485 }
3486 STp->partition = STp->new_partition = 0;
3487 STp->nbr_partitions = 1; /* Bad guess ?-) */
3488 STps->drv_block = STps->drv_file = 0;
3489 retval = 0;
3490 goto out;
3491 }
3492
3493 if (mtc.mt_op == MTSEEK) {
3494 i = set_location(STp, mtc.mt_count, STp->new_partition, 0);
3495 if (!STp->can_partitions)
3496 STp->ps[0].rw = ST_IDLE;
3497 retval = i;
3498 goto out;
3499 }
3500
3501 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) {
3502 retval = do_load_unload(STp, file, 0);
3503 goto out;
3504 }
3505
3506 if (mtc.mt_op == MTLOAD) {
3507 retval = do_load_unload(STp, file, max(1, mtc.mt_count));
3508 goto out;
3509 }
3510
3511 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
3512 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
3513 goto out;
3514 }
3515
3516 if (STp->can_partitions && STp->ready == ST_READY &&
3517 (i = switch_partition(STp)) < 0) {
3518 retval = i;
3519 goto out;
3520 }
3521
3522 if (mtc.mt_op == MTCOMPRESSION)
3523 retval = st_compression(STp, (mtc.mt_count & 1));
3524 else
3525 retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count);
3526 goto out;
3527 }
3528 if (!STm->defined) {
3529 retval = (-ENXIO);
3530 goto out;
3531 }
3532
3533 if ((i = flush_buffer(STp, 0)) < 0) {
3534 retval = i;
3535 goto out;
3536 }
3537 if (STp->can_partitions &&
3538 (i = switch_partition(STp)) < 0) {
3539 retval = i;
3540 goto out;
3541 }
3542
3543 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
3544 struct mtget mt_status;
3545
3546 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
3547 retval = (-EINVAL);
3548 goto out;
3549 }
3550
3551 mt_status.mt_type = STp->tape_type;
3552 mt_status.mt_dsreg =
3553 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
3554 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
3555 mt_status.mt_blkno = STps->drv_block;
3556 mt_status.mt_fileno = STps->drv_file;
3557 if (STp->block_size != 0) {
3558 if (STps->rw == ST_WRITING)
3559 mt_status.mt_blkno +=
3560 (STp->buffer)->buffer_bytes / STp->block_size;
3561 else if (STps->rw == ST_READING)
3562 mt_status.mt_blkno -=
3563 ((STp->buffer)->buffer_bytes +
3564 STp->block_size - 1) / STp->block_size;
3565 }
3566
3567 mt_status.mt_gstat = 0;
3568 if (STp->drv_write_prot)
3569 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
3570 if (mt_status.mt_blkno == 0) {
3571 if (mt_status.mt_fileno == 0)
3572 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
3573 else
3574 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
3575 }
3576 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT);
3577 mt_status.mt_resid = STp->partition;
3578 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
3579 mt_status.mt_gstat |= GMT_EOT(0xffffffff);
3580 else if (STps->eof >= ST_EOM_OK)
3581 mt_status.mt_gstat |= GMT_EOD(0xffffffff);
3582 if (STp->density == 1)
3583 mt_status.mt_gstat |= GMT_D_800(0xffffffff);
3584 else if (STp->density == 2)
3585 mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
3586 else if (STp->density == 3)
3587 mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
3588 if (STp->ready == ST_READY)
3589 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
3590 if (STp->ready == ST_NO_TAPE)
3591 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
3592 if (STps->at_sm)
3593 mt_status.mt_gstat |= GMT_SM(0xffffffff);
3594 if (STm->do_async_writes ||
3595 (STm->do_buffer_writes && STp->block_size != 0) ||
3596 STp->drv_buffer != 0)
3597 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
3598 if (STp->cleaning_req)
3599 mt_status.mt_gstat |= GMT_CLN(0xffffffff);
3600
3601 i = copy_to_user(p, &mt_status, sizeof(struct mtget));
3602 if (i) {
3603 retval = (-EFAULT);
3604 goto out;
3605 }
3606
3607 STp->recover_reg = 0; /* Clear after read */
3608 retval = 0;
3609 goto out;
3610 } /* End of MTIOCGET */
3611 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
3612 struct mtpos mt_pos;
3613 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
3614 retval = (-EINVAL);
3615 goto out;
3616 }
3617 if ((i = get_location(STp, &blk, &bt, 0)) < 0) {
3618 retval = i;
3619 goto out;
3620 }
3621 mt_pos.mt_blkno = blk;
3622 i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
3623 if (i)
3624 retval = (-EFAULT);
3625 goto out;
3626 }
3627 mutex_unlock(&STp->lock);
3628 switch (cmd_in) {
3629 case SCSI_IOCTL_GET_IDLUN:
3630 case SCSI_IOCTL_GET_BUS_NUMBER:
3631 break;
3632 default:
3633 if ((cmd_in == SG_IO ||
3634 cmd_in == SCSI_IOCTL_SEND_COMMAND ||
3635 cmd_in == CDROM_SEND_PACKET) &&
3636 !capable(CAP_SYS_RAWIO))
3637 i = -EPERM;
3638 else
3639 i = scsi_cmd_ioctl(STp->disk->queue, STp->disk,
3640 file->f_mode, cmd_in, p);
3641 if (i != -ENOTTY)
3642 return i;
3643 break;
3644 }
3645 retval = scsi_ioctl(STp->device, cmd_in, p);
3646 if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) { /* unload */
3647 STp->rew_at_close = 0;
3648 STp->ready = ST_NO_TAPE;
3649 }
3650 return retval;
3651
3652 out:
3653 mutex_unlock(&STp->lock);
3654 return retval;
3655}
3656
3657#ifdef CONFIG_COMPAT
3658static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
3659{
3660 struct scsi_tape *STp = file->private_data;
3661 struct scsi_device *sdev = STp->device;
3662 int ret = -ENOIOCTLCMD;
3663 if (sdev->host->hostt->compat_ioctl) {
3664
3665 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
3666
3667 }
3668 return ret;
3669}
3670#endif
3671
3672
3673
3674/* Try to allocate a new tape buffer. Calling function must not hold
3675 dev_arr_lock. */
3676static struct st_buffer *new_tape_buffer(int need_dma, int max_sg)
3677{
3678 struct st_buffer *tb;
3679
3680 tb = kzalloc(sizeof(struct st_buffer), GFP_ATOMIC);
3681 if (!tb) {
3682 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
3683 return NULL;
3684 }
3685 tb->frp_segs = 0;
3686 tb->use_sg = max_sg;
3687 tb->dma = need_dma;
3688 tb->buffer_size = 0;
3689
3690 tb->reserved_pages = kzalloc(max_sg * sizeof(struct page *),
3691 GFP_ATOMIC);
3692 if (!tb->reserved_pages) {
3693 kfree(tb);
3694 return NULL;
3695 }
3696
3697 return tb;
3698}
3699
3700
3701/* Try to allocate enough space in the tape buffer */
3702#define ST_MAX_ORDER 6
3703
3704static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma)
3705{
3706 int segs, nbr, max_segs, b_size, order, got;
3707 gfp_t priority;
3708
3709 if (new_size <= STbuffer->buffer_size)
3710 return 1;
3711
3712 if (STbuffer->buffer_size <= PAGE_SIZE)
3713 normalize_buffer(STbuffer); /* Avoid extra segment */
3714
3715 max_segs = STbuffer->use_sg;
3716 nbr = max_segs - STbuffer->frp_segs;
3717 if (nbr <= 0)
3718 return 0;
3719
3720 priority = GFP_KERNEL | __GFP_NOWARN;
3721 if (need_dma)
3722 priority |= GFP_DMA;
3723
3724 if (STbuffer->cleared)
3725 priority |= __GFP_ZERO;
3726
3727 if (STbuffer->frp_segs) {
3728 order = STbuffer->reserved_page_order;
3729 b_size = PAGE_SIZE << order;
3730 } else {
3731 for (b_size = PAGE_SIZE, order = 0;
3732 order < ST_MAX_ORDER &&
3733 max_segs * (PAGE_SIZE << order) < new_size;
3734 order++, b_size *= 2)
3735 ; /* empty */
3736 STbuffer->reserved_page_order = order;
3737 }
3738 if (max_segs * (PAGE_SIZE << order) < new_size) {
3739 if (order == ST_MAX_ORDER)
3740 return 0;
3741 normalize_buffer(STbuffer);
3742 return enlarge_buffer(STbuffer, new_size, need_dma);
3743 }
3744
3745 for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size;
3746 segs < max_segs && got < new_size;) {
3747 struct page *page;
3748
3749 page = alloc_pages(priority, order);
3750 if (!page) {
3751 DEB(STbuffer->buffer_size = got);
3752 normalize_buffer(STbuffer);
3753 return 0;
3754 }
3755
3756 STbuffer->frp_segs += 1;
3757 got += b_size;
3758 STbuffer->buffer_size = got;
3759 STbuffer->reserved_pages[segs] = page;
3760 segs++;
3761 }
3762 STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
3763
3764 return 1;
3765}
3766
3767
3768/* Make sure that no data from previous user is in the internal buffer */
3769static void clear_buffer(struct st_buffer * st_bp)
3770{
3771 int i;
3772
3773 for (i=0; i < st_bp->frp_segs; i++)
3774 memset(page_address(st_bp->reserved_pages[i]), 0,
3775 PAGE_SIZE << st_bp->reserved_page_order);
3776 st_bp->cleared = 1;
3777}
3778
3779
3780/* Release the extra buffer */
3781static void normalize_buffer(struct st_buffer * STbuffer)
3782{
3783 int i, order = STbuffer->reserved_page_order;
3784
3785 for (i = 0; i < STbuffer->frp_segs; i++) {
3786 __free_pages(STbuffer->reserved_pages[i], order);
3787 STbuffer->buffer_size -= (PAGE_SIZE << order);
3788 }
3789 STbuffer->frp_segs = 0;
3790 STbuffer->sg_segs = 0;
3791 STbuffer->reserved_page_order = 0;
3792 STbuffer->map_data.offset = 0;
3793}
3794
3795
3796/* Move data from the user buffer to the tape buffer. Returns zero (success) or
3797 negative error code. */
3798static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
3799{
3800 int i, cnt, res, offset;
3801 int length = PAGE_SIZE << st_bp->reserved_page_order;
3802
3803 for (i = 0, offset = st_bp->buffer_bytes;
3804 i < st_bp->frp_segs && offset >= length; i++)
3805 offset -= length;
3806 if (i == st_bp->frp_segs) { /* Should never happen */
3807 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
3808 return (-EIO);
3809 }
3810 for (; i < st_bp->frp_segs && do_count > 0; i++) {
3811 struct page *page = st_bp->reserved_pages[i];
3812 cnt = length - offset < do_count ? length - offset : do_count;
3813 res = copy_from_user(page_address(page) + offset, ubp, cnt);
3814 if (res)
3815 return (-EFAULT);
3816 do_count -= cnt;
3817 st_bp->buffer_bytes += cnt;
3818 ubp += cnt;
3819 offset = 0;
3820 }
3821 if (do_count) /* Should never happen */
3822 return (-EIO);
3823
3824 return 0;
3825}
3826
3827
3828/* Move data from the tape buffer to the user buffer. Returns zero (success) or
3829 negative error code. */
3830static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
3831{
3832 int i, cnt, res, offset;
3833 int length = PAGE_SIZE << st_bp->reserved_page_order;
3834
3835 for (i = 0, offset = st_bp->read_pointer;
3836 i < st_bp->frp_segs && offset >= length; i++)
3837 offset -= length;
3838 if (i == st_bp->frp_segs) { /* Should never happen */
3839 printk(KERN_WARNING "st: from_buffer offset overflow.\n");
3840 return (-EIO);
3841 }
3842 for (; i < st_bp->frp_segs && do_count > 0; i++) {
3843 struct page *page = st_bp->reserved_pages[i];
3844 cnt = length - offset < do_count ? length - offset : do_count;
3845 res = copy_to_user(ubp, page_address(page) + offset, cnt);
3846 if (res)
3847 return (-EFAULT);
3848 do_count -= cnt;
3849 st_bp->buffer_bytes -= cnt;
3850 st_bp->read_pointer += cnt;
3851 ubp += cnt;
3852 offset = 0;
3853 }
3854 if (do_count) /* Should never happen */
3855 return (-EIO);
3856
3857 return 0;
3858}
3859
3860
3861/* Move data towards start of buffer */
3862static void move_buffer_data(struct st_buffer * st_bp, int offset)
3863{
3864 int src_seg, dst_seg, src_offset = 0, dst_offset;
3865 int count, total;
3866 int length = PAGE_SIZE << st_bp->reserved_page_order;
3867
3868 if (offset == 0)
3869 return;
3870
3871 total=st_bp->buffer_bytes - offset;
3872 for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) {
3873 src_offset = offset;
3874 if (src_offset < length)
3875 break;
3876 offset -= length;
3877 }
3878
3879 st_bp->buffer_bytes = st_bp->read_pointer = total;
3880 for (dst_seg=dst_offset=0; total > 0; ) {
3881 struct page *dpage = st_bp->reserved_pages[dst_seg];
3882 struct page *spage = st_bp->reserved_pages[src_seg];
3883
3884 count = min(length - dst_offset, length - src_offset);
3885 memmove(page_address(dpage) + dst_offset,
3886 page_address(spage) + src_offset, count);
3887 src_offset += count;
3888 if (src_offset >= length) {
3889 src_seg++;
3890 src_offset = 0;
3891 }
3892 dst_offset += count;
3893 if (dst_offset >= length) {
3894 dst_seg++;
3895 dst_offset = 0;
3896 }
3897 total -= count;
3898 }
3899}
3900
3901/* Validate the options from command line or module parameters */
3902static void validate_options(void)
3903{
3904 if (buffer_kbs > 0)
3905 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE;
3906 if (max_sg_segs >= ST_FIRST_SG)
3907 st_max_sg_segs = max_sg_segs;
3908}
3909
3910#ifndef MODULE
3911/* Set the boot options. Syntax is defined in Documenation/scsi/st.txt.
3912 */
3913static int __init st_setup(char *str)
3914{
3915 int i, len, ints[5];
3916 char *stp;
3917
3918 stp = get_options(str, ARRAY_SIZE(ints), ints);
3919
3920 if (ints[0] > 0) {
3921 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
3922 if (parms[i].val)
3923 *parms[i].val = ints[i + 1];
3924 } else {
3925 while (stp != NULL) {
3926 for (i = 0; i < ARRAY_SIZE(parms); i++) {
3927 len = strlen(parms[i].name);
3928 if (!strncmp(stp, parms[i].name, len) &&
3929 (*(stp + len) == ':' || *(stp + len) == '=')) {
3930 if (parms[i].val)
3931 *parms[i].val =
3932 simple_strtoul(stp + len + 1, NULL, 0);
3933 else
3934 printk(KERN_WARNING "st: Obsolete parameter %s\n",
3935 parms[i].name);
3936 break;
3937 }
3938 }
3939 if (i >= ARRAY_SIZE(parms))
3940 printk(KERN_WARNING "st: invalid parameter in '%s'\n",
3941 stp);
3942 stp = strchr(stp, ',');
3943 if (stp)
3944 stp++;
3945 }
3946 }
3947
3948 validate_options();
3949
3950 return 1;
3951}
3952
3953__setup("st=", st_setup);
3954
3955#endif
3956
3957static const struct file_operations st_fops =
3958{
3959 .owner = THIS_MODULE,
3960 .read = st_read,
3961 .write = st_write,
3962 .unlocked_ioctl = st_ioctl,
3963#ifdef CONFIG_COMPAT
3964 .compat_ioctl = st_compat_ioctl,
3965#endif
3966 .open = st_open,
3967 .flush = st_flush,
3968 .release = st_release,
3969 .llseek = noop_llseek,
3970};
3971
3972static int st_probe(struct device *dev)
3973{
3974 struct scsi_device *SDp = to_scsi_device(dev);
3975 struct gendisk *disk = NULL;
3976 struct cdev *cdev = NULL;
3977 struct scsi_tape *tpnt = NULL;
3978 struct st_modedef *STm;
3979 struct st_partstat *STps;
3980 struct st_buffer *buffer;
3981 int i, j, mode, dev_num, error;
3982 char *stp;
3983
3984 if (SDp->type != TYPE_TAPE)
3985 return -ENODEV;
3986 if ((stp = st_incompatible(SDp))) {
3987 sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n");
3988 printk(KERN_INFO "st: The suggested driver is %s.\n", stp);
3989 return -ENODEV;
3990 }
3991
3992 i = queue_max_segments(SDp->request_queue);
3993 if (st_max_sg_segs < i)
3994 i = st_max_sg_segs;
3995 buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i);
3996 if (buffer == NULL) {
3997 printk(KERN_ERR
3998 "st: Can't allocate new tape buffer. Device not attached.\n");
3999 goto out;
4000 }
4001
4002 disk = alloc_disk(1);
4003 if (!disk) {
4004 printk(KERN_ERR "st: out of memory. Device not attached.\n");
4005 goto out_buffer_free;
4006 }
4007
4008 write_lock(&st_dev_arr_lock);
4009 if (st_nr_dev >= st_dev_max) {
4010 struct scsi_tape **tmp_da;
4011 int tmp_dev_max;
4012
4013 tmp_dev_max = max(st_nr_dev * 2, 8);
4014 if (tmp_dev_max > ST_MAX_TAPES)
4015 tmp_dev_max = ST_MAX_TAPES;
4016 if (tmp_dev_max <= st_nr_dev) {
4017 write_unlock(&st_dev_arr_lock);
4018 printk(KERN_ERR "st: Too many tape devices (max. %d).\n",
4019 ST_MAX_TAPES);
4020 goto out_put_disk;
4021 }
4022
4023 tmp_da = kzalloc(tmp_dev_max * sizeof(struct scsi_tape *), GFP_ATOMIC);
4024 if (tmp_da == NULL) {
4025 write_unlock(&st_dev_arr_lock);
4026 printk(KERN_ERR "st: Can't extend device array.\n");
4027 goto out_put_disk;
4028 }
4029
4030 if (scsi_tapes != NULL) {
4031 memcpy(tmp_da, scsi_tapes,
4032 st_dev_max * sizeof(struct scsi_tape *));
4033 kfree(scsi_tapes);
4034 }
4035 scsi_tapes = tmp_da;
4036
4037 st_dev_max = tmp_dev_max;
4038 }
4039
4040 for (i = 0; i < st_dev_max; i++)
4041 if (scsi_tapes[i] == NULL)
4042 break;
4043 if (i >= st_dev_max)
4044 panic("scsi_devices corrupt (st)");
4045
4046 tpnt = kzalloc(sizeof(struct scsi_tape), GFP_ATOMIC);
4047 if (tpnt == NULL) {
4048 write_unlock(&st_dev_arr_lock);
4049 printk(KERN_ERR "st: Can't allocate device descriptor.\n");
4050 goto out_put_disk;
4051 }
4052 kref_init(&tpnt->kref);
4053 tpnt->disk = disk;
4054 sprintf(disk->disk_name, "st%d", i);
4055 disk->private_data = &tpnt->driver;
4056 disk->queue = SDp->request_queue;
4057 tpnt->driver = &st_template;
4058 scsi_tapes[i] = tpnt;
4059 dev_num = i;
4060
4061 tpnt->device = SDp;
4062 if (SDp->scsi_level <= 2)
4063 tpnt->tape_type = MT_ISSCSI1;
4064 else
4065 tpnt->tape_type = MT_ISSCSI2;
4066
4067 tpnt->buffer = buffer;
4068 tpnt->buffer->last_SRpnt = NULL;
4069
4070 tpnt->inited = 0;
4071 tpnt->dirty = 0;
4072 tpnt->in_use = 0;
4073 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
4074 tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
4075 tpnt->use_pf = (SDp->scsi_level >= SCSI_2);
4076 tpnt->density = 0;
4077 tpnt->do_auto_lock = ST_AUTO_LOCK;
4078 tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */
4079 tpnt->can_partitions = 0;
4080 tpnt->two_fm = ST_TWO_FM;
4081 tpnt->fast_mteom = ST_FAST_MTEOM;
4082 tpnt->scsi2_logical = ST_SCSI2LOGICAL;
4083 tpnt->sili = ST_SILI;
4084 tpnt->immediate = ST_NOWAIT;
4085 tpnt->default_drvbuffer = 0xff; /* No forced buffering */
4086 tpnt->partition = 0;
4087 tpnt->new_partition = 0;
4088 tpnt->nbr_partitions = 0;
4089 blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT);
4090 tpnt->long_timeout = ST_LONG_TIMEOUT;
4091 tpnt->try_dio = try_direct_io && !SDp->host->unchecked_isa_dma;
4092
4093 for (i = 0; i < ST_NBR_MODES; i++) {
4094 STm = &(tpnt->modes[i]);
4095 STm->defined = 0;
4096 STm->sysv = ST_SYSV;
4097 STm->defaults_for_writes = 0;
4098 STm->do_async_writes = ST_ASYNC_WRITES;
4099 STm->do_buffer_writes = ST_BUFFER_WRITES;
4100 STm->do_read_ahead = ST_READ_AHEAD;
4101 STm->default_compression = ST_DONT_TOUCH;
4102 STm->default_blksize = (-1); /* No forced size */
4103 STm->default_density = (-1); /* No forced density */
4104 }
4105
4106 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
4107 STps = &(tpnt->ps[i]);
4108 STps->rw = ST_IDLE;
4109 STps->eof = ST_NOEOF;
4110 STps->at_sm = 0;
4111 STps->last_block_valid = 0;
4112 STps->drv_block = (-1);
4113 STps->drv_file = (-1);
4114 }
4115
4116 tpnt->current_mode = 0;
4117 tpnt->modes[0].defined = 1;
4118
4119 tpnt->density_changed = tpnt->compression_changed =
4120 tpnt->blksize_changed = 0;
4121 mutex_init(&tpnt->lock);
4122
4123 st_nr_dev++;
4124 write_unlock(&st_dev_arr_lock);
4125
4126 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4127 STm = &(tpnt->modes[mode]);
4128 for (j=0; j < 2; j++) {
4129 cdev = cdev_alloc();
4130 if (!cdev) {
4131 printk(KERN_ERR
4132 "st%d: out of memory. Device not attached.\n",
4133 dev_num);
4134 goto out_free_tape;
4135 }
4136 cdev->owner = THIS_MODULE;
4137 cdev->ops = &st_fops;
4138
4139 error = cdev_add(cdev,
4140 MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, j)),
4141 1);
4142 if (error) {
4143 printk(KERN_ERR "st%d: Can't add %s-rewind mode %d\n",
4144 dev_num, j ? "non" : "auto", mode);
4145 printk(KERN_ERR "st%d: Device not attached.\n", dev_num);
4146 goto out_free_tape;
4147 }
4148 STm->cdevs[j] = cdev;
4149
4150 }
4151 error = do_create_class_files(tpnt, dev_num, mode);
4152 if (error)
4153 goto out_free_tape;
4154 }
4155
4156 sdev_printk(KERN_NOTICE, SDp,
4157 "Attached scsi tape %s\n", tape_name(tpnt));
4158 sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
4159 tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
4160 queue_dma_alignment(SDp->request_queue) + 1);
4161
4162 return 0;
4163
4164out_free_tape:
4165 for (mode=0; mode < ST_NBR_MODES; mode++) {
4166 STm = &(tpnt->modes[mode]);
4167 sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
4168 "tape");
4169 for (j=0; j < 2; j++) {
4170 if (STm->cdevs[j]) {
4171 if (cdev == STm->cdevs[j])
4172 cdev = NULL;
4173 device_destroy(st_sysfs_class,
4174 MKDEV(SCSI_TAPE_MAJOR,
4175 TAPE_MINOR(i, mode, j)));
4176 cdev_del(STm->cdevs[j]);
4177 }
4178 }
4179 }
4180 if (cdev)
4181 cdev_del(cdev);
4182 write_lock(&st_dev_arr_lock);
4183 scsi_tapes[dev_num] = NULL;
4184 st_nr_dev--;
4185 write_unlock(&st_dev_arr_lock);
4186out_put_disk:
4187 put_disk(disk);
4188 kfree(tpnt);
4189out_buffer_free:
4190 kfree(buffer);
4191out:
4192 return -ENODEV;
4193};
4194
4195
4196static int st_remove(struct device *dev)
4197{
4198 struct scsi_device *SDp = to_scsi_device(dev);
4199 struct scsi_tape *tpnt;
4200 int i, j, mode;
4201
4202 write_lock(&st_dev_arr_lock);
4203 for (i = 0; i < st_dev_max; i++) {
4204 tpnt = scsi_tapes[i];
4205 if (tpnt != NULL && tpnt->device == SDp) {
4206 scsi_tapes[i] = NULL;
4207 st_nr_dev--;
4208 write_unlock(&st_dev_arr_lock);
4209 sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
4210 "tape");
4211 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4212 for (j=0; j < 2; j++) {
4213 device_destroy(st_sysfs_class,
4214 MKDEV(SCSI_TAPE_MAJOR,
4215 TAPE_MINOR(i, mode, j)));
4216 cdev_del(tpnt->modes[mode].cdevs[j]);
4217 tpnt->modes[mode].cdevs[j] = NULL;
4218 }
4219 }
4220
4221 mutex_lock(&st_ref_mutex);
4222 kref_put(&tpnt->kref, scsi_tape_release);
4223 mutex_unlock(&st_ref_mutex);
4224 return 0;
4225 }
4226 }
4227
4228 write_unlock(&st_dev_arr_lock);
4229 return 0;
4230}
4231
4232/**
4233 * scsi_tape_release - Called to free the Scsi_Tape structure
4234 * @kref: pointer to embedded kref
4235 *
4236 * st_ref_mutex must be held entering this routine. Because it is
4237 * called on last put, you should always use the scsi_tape_get()
4238 * scsi_tape_put() helpers which manipulate the semaphore directly
4239 * and never do a direct kref_put().
4240 **/
4241static void scsi_tape_release(struct kref *kref)
4242{
4243 struct scsi_tape *tpnt = to_scsi_tape(kref);
4244 struct gendisk *disk = tpnt->disk;
4245
4246 tpnt->device = NULL;
4247
4248 if (tpnt->buffer) {
4249 normalize_buffer(tpnt->buffer);
4250 kfree(tpnt->buffer->reserved_pages);
4251 kfree(tpnt->buffer);
4252 }
4253
4254 disk->private_data = NULL;
4255 put_disk(disk);
4256 kfree(tpnt);
4257 return;
4258}
4259
4260static int __init init_st(void)
4261{
4262 int err;
4263
4264 validate_options();
4265
4266 printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
4267 verstr, st_fixed_buffer_size, st_max_sg_segs);
4268
4269 st_sysfs_class = class_create(THIS_MODULE, "scsi_tape");
4270 if (IS_ERR(st_sysfs_class)) {
4271 printk(KERN_ERR "Unable create sysfs class for SCSI tapes\n");
4272 return PTR_ERR(st_sysfs_class);
4273 }
4274
4275 err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4276 ST_MAX_TAPE_ENTRIES, "st");
4277 if (err) {
4278 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
4279 SCSI_TAPE_MAJOR);
4280 goto err_class;
4281 }
4282
4283 err = scsi_register_driver(&st_template.gendrv);
4284 if (err)
4285 goto err_chrdev;
4286
4287 err = do_create_sysfs_files();
4288 if (err)
4289 goto err_scsidrv;
4290
4291 return 0;
4292
4293err_scsidrv:
4294 scsi_unregister_driver(&st_template.gendrv);
4295err_chrdev:
4296 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4297 ST_MAX_TAPE_ENTRIES);
4298err_class:
4299 class_destroy(st_sysfs_class);
4300 return err;
4301}
4302
4303static void __exit exit_st(void)
4304{
4305 do_remove_sysfs_files();
4306 scsi_unregister_driver(&st_template.gendrv);
4307 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4308 ST_MAX_TAPE_ENTRIES);
4309 class_destroy(st_sysfs_class);
4310 kfree(scsi_tapes);
4311 printk(KERN_INFO "st: Unloaded.\n");
4312}
4313
4314module_init(init_st);
4315module_exit(exit_st);
4316
4317
4318/* The sysfs driver interface. Read-only at the moment */
4319static ssize_t st_try_direct_io_show(struct device_driver *ddp, char *buf)
4320{
4321 return snprintf(buf, PAGE_SIZE, "%d\n", try_direct_io);
4322}
4323static DRIVER_ATTR(try_direct_io, S_IRUGO, st_try_direct_io_show, NULL);
4324
4325static ssize_t st_fixed_buffer_size_show(struct device_driver *ddp, char *buf)
4326{
4327 return snprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size);
4328}
4329static DRIVER_ATTR(fixed_buffer_size, S_IRUGO, st_fixed_buffer_size_show, NULL);
4330
4331static ssize_t st_max_sg_segs_show(struct device_driver *ddp, char *buf)
4332{
4333 return snprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs);
4334}
4335static DRIVER_ATTR(max_sg_segs, S_IRUGO, st_max_sg_segs_show, NULL);
4336
4337static ssize_t st_version_show(struct device_driver *ddd, char *buf)
4338{
4339 return snprintf(buf, PAGE_SIZE, "[%s]\n", verstr);
4340}
4341static DRIVER_ATTR(version, S_IRUGO, st_version_show, NULL);
4342
4343static int do_create_sysfs_files(void)
4344{
4345 struct device_driver *sysfs = &st_template.gendrv;
4346 int err;
4347
4348 err = driver_create_file(sysfs, &driver_attr_try_direct_io);
4349 if (err)
4350 return err;
4351 err = driver_create_file(sysfs, &driver_attr_fixed_buffer_size);
4352 if (err)
4353 goto err_try_direct_io;
4354 err = driver_create_file(sysfs, &driver_attr_max_sg_segs);
4355 if (err)
4356 goto err_attr_fixed_buf;
4357 err = driver_create_file(sysfs, &driver_attr_version);
4358 if (err)
4359 goto err_attr_max_sg;
4360
4361 return 0;
4362
4363err_attr_max_sg:
4364 driver_remove_file(sysfs, &driver_attr_max_sg_segs);
4365err_attr_fixed_buf:
4366 driver_remove_file(sysfs, &driver_attr_fixed_buffer_size);
4367err_try_direct_io:
4368 driver_remove_file(sysfs, &driver_attr_try_direct_io);
4369 return err;
4370}
4371
4372static void do_remove_sysfs_files(void)
4373{
4374 struct device_driver *sysfs = &st_template.gendrv;
4375
4376 driver_remove_file(sysfs, &driver_attr_version);
4377 driver_remove_file(sysfs, &driver_attr_max_sg_segs);
4378 driver_remove_file(sysfs, &driver_attr_fixed_buffer_size);
4379 driver_remove_file(sysfs, &driver_attr_try_direct_io);
4380}
4381
4382
4383/* The sysfs simple class interface */
4384static ssize_t
4385st_defined_show(struct device *dev, struct device_attribute *attr, char *buf)
4386{
4387 struct st_modedef *STm = dev_get_drvdata(dev);
4388 ssize_t l = 0;
4389
4390 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined);
4391 return l;
4392}
4393
4394DEVICE_ATTR(defined, S_IRUGO, st_defined_show, NULL);
4395
4396static ssize_t
4397st_defblk_show(struct device *dev, struct device_attribute *attr, char *buf)
4398{
4399 struct st_modedef *STm = dev_get_drvdata(dev);
4400 ssize_t l = 0;
4401
4402 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize);
4403 return l;
4404}
4405
4406DEVICE_ATTR(default_blksize, S_IRUGO, st_defblk_show, NULL);
4407
4408static ssize_t
4409st_defdensity_show(struct device *dev, struct device_attribute *attr, char *buf)
4410{
4411 struct st_modedef *STm = dev_get_drvdata(dev);
4412 ssize_t l = 0;
4413 char *fmt;
4414
4415 fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n";
4416 l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density);
4417 return l;
4418}
4419
4420DEVICE_ATTR(default_density, S_IRUGO, st_defdensity_show, NULL);
4421
4422static ssize_t
4423st_defcompression_show(struct device *dev, struct device_attribute *attr,
4424 char *buf)
4425{
4426 struct st_modedef *STm = dev_get_drvdata(dev);
4427 ssize_t l = 0;
4428
4429 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1);
4430 return l;
4431}
4432
4433DEVICE_ATTR(default_compression, S_IRUGO, st_defcompression_show, NULL);
4434
4435static ssize_t
4436st_options_show(struct device *dev, struct device_attribute *attr, char *buf)
4437{
4438 struct st_modedef *STm = dev_get_drvdata(dev);
4439 struct scsi_tape *STp;
4440 int i, j, options;
4441 ssize_t l = 0;
4442
4443 for (i=0; i < st_dev_max; i++) {
4444 for (j=0; j < ST_NBR_MODES; j++)
4445 if (&scsi_tapes[i]->modes[j] == STm)
4446 break;
4447 if (j < ST_NBR_MODES)
4448 break;
4449 }
4450 if (i == st_dev_max)
4451 return 0; /* should never happen */
4452
4453 STp = scsi_tapes[i];
4454
4455 options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0;
4456 options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0;
4457 options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0;
4458 DEB( options |= debugging ? MT_ST_DEBUGGING : 0 );
4459 options |= STp->two_fm ? MT_ST_TWO_FM : 0;
4460 options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0;
4461 options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0;
4462 options |= STp->can_bsr ? MT_ST_CAN_BSR : 0;
4463 options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0;
4464 options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0;
4465 options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
4466 options |= STm->sysv ? MT_ST_SYSV : 0;
4467 options |= STp->immediate ? MT_ST_NOWAIT : 0;
4468 options |= STp->sili ? MT_ST_SILI : 0;
4469
4470 l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
4471 return l;
4472}
4473
4474DEVICE_ATTR(options, S_IRUGO, st_options_show, NULL);
4475
4476static int do_create_class_files(struct scsi_tape *STp, int dev_num, int mode)
4477{
4478 int i, rew, error;
4479 char name[10];
4480 struct device *st_class_member;
4481
4482 for (rew=0; rew < 2; rew++) {
4483 /* Make sure that the minor numbers corresponding to the four
4484 first modes always get the same names */
4485 i = mode << (4 - ST_NBR_MODE_BITS);
4486 snprintf(name, 10, "%s%s%s", rew ? "n" : "",
4487 STp->disk->disk_name, st_formats[i]);
4488 st_class_member =
4489 device_create(st_sysfs_class, &STp->device->sdev_gendev,
4490 MKDEV(SCSI_TAPE_MAJOR,
4491 TAPE_MINOR(dev_num, mode, rew)),
4492 &STp->modes[mode], "%s", name);
4493 if (IS_ERR(st_class_member)) {
4494 printk(KERN_WARNING "st%d: device_create failed\n",
4495 dev_num);
4496 error = PTR_ERR(st_class_member);
4497 goto out;
4498 }
4499
4500 error = device_create_file(st_class_member,
4501 &dev_attr_defined);
4502 if (error) goto out;
4503 error = device_create_file(st_class_member,
4504 &dev_attr_default_blksize);
4505 if (error) goto out;
4506 error = device_create_file(st_class_member,
4507 &dev_attr_default_density);
4508 if (error) goto out;
4509 error = device_create_file(st_class_member,
4510 &dev_attr_default_compression);
4511 if (error) goto out;
4512 error = device_create_file(st_class_member,
4513 &dev_attr_options);
4514 if (error) goto out;
4515
4516 if (mode == 0 && rew == 0) {
4517 error = sysfs_create_link(&STp->device->sdev_gendev.kobj,
4518 &st_class_member->kobj,
4519 "tape");
4520 if (error) {
4521 printk(KERN_ERR
4522 "st%d: Can't create sysfs link from SCSI device.\n",
4523 dev_num);
4524 goto out;
4525 }
4526 }
4527 }
4528
4529 return 0;
4530
4531out:
4532 return error;
4533}
4534
4535/* The following functions may be useful for a larger audience. */
4536static int sgl_map_user_pages(struct st_buffer *STbp,
4537 const unsigned int max_pages, unsigned long uaddr,
4538 size_t count, int rw)
4539{
4540 unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
4541 unsigned long start = uaddr >> PAGE_SHIFT;
4542 const int nr_pages = end - start;
4543 int res, i, j;
4544 struct page **pages;
4545 struct rq_map_data *mdata = &STbp->map_data;
4546
4547 /* User attempted Overflow! */
4548 if ((uaddr + count) < uaddr)
4549 return -EINVAL;
4550
4551 /* Too big */
4552 if (nr_pages > max_pages)
4553 return -ENOMEM;
4554
4555 /* Hmm? */
4556 if (count == 0)
4557 return 0;
4558
4559 if ((pages = kmalloc(max_pages * sizeof(*pages), GFP_KERNEL)) == NULL)
4560 return -ENOMEM;
4561
4562 /* Try to fault in all of the necessary pages */
4563 down_read(¤t->mm->mmap_sem);
4564 /* rw==READ means read from drive, write into memory area */
4565 res = get_user_pages(
4566 current,
4567 current->mm,
4568 uaddr,
4569 nr_pages,
4570 rw == READ,
4571 0, /* don't force */
4572 pages,
4573 NULL);
4574 up_read(¤t->mm->mmap_sem);
4575
4576 /* Errors and no page mapped should return here */
4577 if (res < nr_pages)
4578 goto out_unmap;
4579
4580 for (i=0; i < nr_pages; i++) {
4581 /* FIXME: flush superflous for rw==READ,
4582 * probably wrong function for rw==WRITE
4583 */
4584 flush_dcache_page(pages[i]);
4585 }
4586
4587 mdata->offset = uaddr & ~PAGE_MASK;
4588 STbp->mapped_pages = pages;
4589
4590 return nr_pages;
4591 out_unmap:
4592 if (res > 0) {
4593 for (j=0; j < res; j++)
4594 page_cache_release(pages[j]);
4595 res = 0;
4596 }
4597 kfree(pages);
4598 return res;
4599}
4600
4601
4602/* And unmap them... */
4603static int sgl_unmap_user_pages(struct st_buffer *STbp,
4604 const unsigned int nr_pages, int dirtied)
4605{
4606 int i;
4607
4608 for (i=0; i < nr_pages; i++) {
4609 struct page *page = STbp->mapped_pages[i];
4610
4611 if (dirtied)
4612 SetPageDirty(page);
4613 /* FIXME: cache flush missing for rw==READ
4614 * FIXME: call the correct reference counting function
4615 */
4616 page_cache_release(page);
4617 }
4618 kfree(STbp->mapped_pages);
4619 STbp->mapped_pages = NULL;
4620
4621 return 0;
4622}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
4 file Documentation/scsi/st.rst for more information.
5
6 History:
7 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
8 Contribution and ideas from several people including (in alphabetical
9 order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk,
10 Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
11 Michael Schaefer, J"org Weule, and Eric Youngdale.
12
13 Copyright 1992 - 2016 Kai Makisara
14 email Kai.Makisara@kolumbus.fi
15
16 Some small formal changes - aeb, 950809
17
18 Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
19 */
20
21static const char *verstr = "20160209";
22
23#include <linux/module.h>
24
25#include <linux/compat.h>
26#include <linux/fs.h>
27#include <linux/kernel.h>
28#include <linux/sched/signal.h>
29#include <linux/mm.h>
30#include <linux/init.h>
31#include <linux/string.h>
32#include <linux/slab.h>
33#include <linux/errno.h>
34#include <linux/mtio.h>
35#include <linux/major.h>
36#include <linux/cdrom.h>
37#include <linux/ioctl.h>
38#include <linux/fcntl.h>
39#include <linux/spinlock.h>
40#include <linux/blkdev.h>
41#include <linux/moduleparam.h>
42#include <linux/cdev.h>
43#include <linux/idr.h>
44#include <linux/delay.h>
45#include <linux/mutex.h>
46
47#include <linux/uaccess.h>
48#include <asm/dma.h>
49#include <asm/unaligned.h>
50
51#include <scsi/scsi.h>
52#include <scsi/scsi_dbg.h>
53#include <scsi/scsi_device.h>
54#include <scsi/scsi_driver.h>
55#include <scsi/scsi_eh.h>
56#include <scsi/scsi_host.h>
57#include <scsi/scsi_ioctl.h>
58#include <scsi/sg.h>
59
60
61/* The driver prints some debugging information on the console if DEBUG
62 is defined and non-zero. */
63#define DEBUG 1
64#define NO_DEBUG 0
65
66#define ST_DEB_MSG KERN_NOTICE
67#if DEBUG
68/* The message level for the debug messages is currently set to KERN_NOTICE
69 so that people can easily see the messages. Later when the debugging messages
70 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
71#define DEB(a) a
72#define DEBC(a) if (debugging) { a ; }
73#else
74#define DEB(a)
75#define DEBC(a)
76#endif
77
78#define ST_KILOBYTE 1024
79
80#include "st_options.h"
81#include "st.h"
82
83static int buffer_kbs;
84static int max_sg_segs;
85static int try_direct_io = TRY_DIRECT_IO;
86static int try_rdio = 1;
87static int try_wdio = 1;
88static int debug_flag;
89
90static struct class st_sysfs_class;
91static const struct attribute_group *st_dev_groups[];
92static const struct attribute_group *st_drv_groups[];
93
94MODULE_AUTHOR("Kai Makisara");
95MODULE_DESCRIPTION("SCSI tape (st) driver");
96MODULE_LICENSE("GPL");
97MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
98MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
99
100/* Set 'perm' (4th argument) to 0 to disable module_param's definition
101 * of sysfs parameters (which module_param doesn't yet support).
102 * Sysfs parameters defined explicitly later.
103 */
104module_param_named(buffer_kbs, buffer_kbs, int, 0);
105MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)");
106module_param_named(max_sg_segs, max_sg_segs, int, 0);
107MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
108module_param_named(try_direct_io, try_direct_io, int, 0);
109MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
110module_param_named(debug_flag, debug_flag, int, 0);
111MODULE_PARM_DESC(debug_flag, "Enable DEBUG, same as setting debugging=1");
112
113
114/* Extra parameters for testing */
115module_param_named(try_rdio, try_rdio, int, 0);
116MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible");
117module_param_named(try_wdio, try_wdio, int, 0);
118MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible");
119
120#ifndef MODULE
121static int write_threshold_kbs; /* retained for compatibility */
122static struct st_dev_parm {
123 char *name;
124 int *val;
125} parms[] __initdata = {
126 {
127 "buffer_kbs", &buffer_kbs
128 },
129 { /* Retained for compatibility with 2.4 */
130 "write_threshold_kbs", &write_threshold_kbs
131 },
132 {
133 "max_sg_segs", NULL
134 },
135 {
136 "try_direct_io", &try_direct_io
137 },
138 {
139 "debug_flag", &debug_flag
140 }
141};
142#endif
143
144/* Restrict the number of modes so that names for all are assigned */
145#if ST_NBR_MODES > 16
146#error "Maximum number of modes is 16"
147#endif
148/* Bit reversed order to get same names for same minors with all
149 mode counts */
150static const char *st_formats[] = {
151 "", "r", "k", "s", "l", "t", "o", "u",
152 "m", "v", "p", "x", "a", "y", "q", "z"};
153
154/* The default definitions have been moved to st_options.h */
155
156#define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE)
157
158/* The buffer size should fit into the 24 bits for length in the
159 6-byte SCSI read and write commands. */
160#if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1)
161#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
162#endif
163
164static int debugging = DEBUG;
165
166#define MAX_RETRIES 0
167#define MAX_WRITE_RETRIES 0
168#define MAX_READY_RETRIES 0
169#define NO_TAPE NOT_READY
170
171#define ST_TIMEOUT (900 * HZ)
172#define ST_LONG_TIMEOUT (14000 * HZ)
173
174/* Remove mode bits and auto-rewind bit (7) */
175#define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \
176 (iminor(x) & ((1 << ST_MODE_SHIFT)-1)))
177#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
178
179/* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */
180#define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \
181 (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) )
182
183/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
184 24 bits) */
185#define SET_DENS_AND_BLK 0x10001
186
187static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE;
188static int st_max_sg_segs = ST_MAX_SG;
189
190static int modes_defined;
191
192static int enlarge_buffer(struct st_buffer *, int);
193static void clear_buffer(struct st_buffer *);
194static void normalize_buffer(struct st_buffer *);
195static int append_to_buffer(const char __user *, struct st_buffer *, int);
196static int from_buffer(struct st_buffer *, char __user *, int);
197static void move_buffer_data(struct st_buffer *, int);
198
199static int sgl_map_user_pages(struct st_buffer *, const unsigned int,
200 unsigned long, size_t, int);
201static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int);
202
203static int st_probe(struct device *);
204static int st_remove(struct device *);
205
206static struct scsi_driver st_template = {
207 .gendrv = {
208 .name = "st",
209 .owner = THIS_MODULE,
210 .probe = st_probe,
211 .remove = st_remove,
212 .groups = st_drv_groups,
213 },
214};
215
216static int st_compression(struct scsi_tape *, int);
217
218static int find_partition(struct scsi_tape *);
219static int switch_partition(struct scsi_tape *);
220
221static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long);
222
223static void scsi_tape_release(struct kref *);
224
225#define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
226
227static DEFINE_MUTEX(st_ref_mutex);
228static DEFINE_SPINLOCK(st_index_lock);
229static DEFINE_SPINLOCK(st_use_lock);
230static DEFINE_IDR(st_index_idr);
231
232
233
234#ifndef SIGS_FROM_OSST
235#define SIGS_FROM_OSST \
236 {"OnStream", "SC-", "", "osst"}, \
237 {"OnStream", "DI-", "", "osst"}, \
238 {"OnStream", "DP-", "", "osst"}, \
239 {"OnStream", "USB", "", "osst"}, \
240 {"OnStream", "FW-", "", "osst"}
241#endif
242
243static struct scsi_tape *scsi_tape_get(int dev)
244{
245 struct scsi_tape *STp = NULL;
246
247 mutex_lock(&st_ref_mutex);
248 spin_lock(&st_index_lock);
249
250 STp = idr_find(&st_index_idr, dev);
251 if (!STp) goto out;
252
253 kref_get(&STp->kref);
254
255 if (!STp->device)
256 goto out_put;
257
258 if (scsi_device_get(STp->device))
259 goto out_put;
260
261 goto out;
262
263out_put:
264 kref_put(&STp->kref, scsi_tape_release);
265 STp = NULL;
266out:
267 spin_unlock(&st_index_lock);
268 mutex_unlock(&st_ref_mutex);
269 return STp;
270}
271
272static void scsi_tape_put(struct scsi_tape *STp)
273{
274 struct scsi_device *sdev = STp->device;
275
276 mutex_lock(&st_ref_mutex);
277 kref_put(&STp->kref, scsi_tape_release);
278 scsi_device_put(sdev);
279 mutex_unlock(&st_ref_mutex);
280}
281
282struct st_reject_data {
283 char *vendor;
284 char *model;
285 char *rev;
286 char *driver_hint; /* Name of the correct driver, NULL if unknown */
287};
288
289static struct st_reject_data reject_list[] = {
290 /* {"XXX", "Yy-", "", NULL}, example */
291 SIGS_FROM_OSST,
292 {NULL, }};
293
294/* If the device signature is on the list of incompatible drives, the
295 function returns a pointer to the name of the correct driver (if known) */
296static char * st_incompatible(struct scsi_device* SDp)
297{
298 struct st_reject_data *rp;
299
300 for (rp=&(reject_list[0]); rp->vendor != NULL; rp++)
301 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
302 !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
303 !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) {
304 if (rp->driver_hint)
305 return rp->driver_hint;
306 else
307 return "unknown";
308 }
309 return NULL;
310}
311
312
313#define st_printk(prefix, t, fmt, a...) \
314 sdev_prefix_printk(prefix, (t)->device, (t)->name, fmt, ##a)
315#ifdef DEBUG
316#define DEBC_printk(t, fmt, a...) \
317 if (debugging) { st_printk(ST_DEB_MSG, t, fmt, ##a ); }
318#else
319#define DEBC_printk(t, fmt, a...)
320#endif
321
322static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s)
323{
324 const u8 *ucp;
325 const u8 *sense = SRpnt->sense;
326
327 s->have_sense = scsi_normalize_sense(SRpnt->sense,
328 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
329 s->flags = 0;
330
331 if (s->have_sense) {
332 s->deferred = 0;
333 s->remainder_valid =
334 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
335 switch (sense[0] & 0x7f) {
336 case 0x71:
337 s->deferred = 1;
338 fallthrough;
339 case 0x70:
340 s->fixed_format = 1;
341 s->flags = sense[2] & 0xe0;
342 break;
343 case 0x73:
344 s->deferred = 1;
345 fallthrough;
346 case 0x72:
347 s->fixed_format = 0;
348 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
349 s->flags = ucp ? (ucp[3] & 0xe0) : 0;
350 break;
351 }
352 }
353}
354
355
356/* Convert the result to success code */
357static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
358{
359 int result = SRpnt->result;
360 u8 scode;
361 DEB(const char *stp;)
362 char *name = STp->name;
363 struct st_cmdstatus *cmdstatp;
364
365 if (!result)
366 return 0;
367
368 cmdstatp = &STp->buffer->cmdstat;
369 st_analyze_sense(SRpnt, cmdstatp);
370
371 if (cmdstatp->have_sense)
372 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
373 else
374 scode = 0;
375
376 DEB(
377 if (debugging) {
378 st_printk(ST_DEB_MSG, STp,
379 "Error: %x, cmd: %x %x %x %x %x %x\n", result,
380 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
381 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
382 if (cmdstatp->have_sense)
383 __scsi_print_sense(STp->device, name,
384 SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
385 } ) /* end DEB */
386 if (!debugging) { /* Abnormal conditions for tape */
387 if (!cmdstatp->have_sense)
388 st_printk(KERN_WARNING, STp,
389 "Error %x (driver bt 0, host bt 0x%x).\n",
390 result, host_byte(result));
391 else if (cmdstatp->have_sense &&
392 scode != NO_SENSE &&
393 scode != RECOVERED_ERROR &&
394 /* scode != UNIT_ATTENTION && */
395 scode != BLANK_CHECK &&
396 scode != VOLUME_OVERFLOW &&
397 SRpnt->cmd[0] != MODE_SENSE &&
398 SRpnt->cmd[0] != TEST_UNIT_READY) {
399
400 __scsi_print_sense(STp->device, name,
401 SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
402 }
403 }
404
405 if (cmdstatp->fixed_format &&
406 STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */
407 if (STp->cln_sense_value)
408 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
409 STp->cln_sense_mask) == STp->cln_sense_value);
410 else
411 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
412 STp->cln_sense_mask) != 0);
413 }
414 if (cmdstatp->have_sense &&
415 cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17)
416 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */
417
418 STp->pos_unknown |= STp->device->was_reset;
419
420 if (cmdstatp->have_sense &&
421 scode == RECOVERED_ERROR
422#if ST_RECOVERED_WRITE_FATAL
423 && SRpnt->cmd[0] != WRITE_6
424 && SRpnt->cmd[0] != WRITE_FILEMARKS
425#endif
426 ) {
427 STp->recover_count++;
428 STp->recover_reg++;
429
430 DEB(
431 if (debugging) {
432 if (SRpnt->cmd[0] == READ_6)
433 stp = "read";
434 else if (SRpnt->cmd[0] == WRITE_6)
435 stp = "write";
436 else
437 stp = "ioctl";
438 st_printk(ST_DEB_MSG, STp,
439 "Recovered %s error (%d).\n",
440 stp, STp->recover_count);
441 } ) /* end DEB */
442
443 if (cmdstatp->flags == 0)
444 return 0;
445 }
446 return (-EIO);
447}
448
449static struct st_request *st_allocate_request(struct scsi_tape *stp)
450{
451 struct st_request *streq;
452
453 streq = kzalloc(sizeof(*streq), GFP_KERNEL);
454 if (streq)
455 streq->stp = stp;
456 else {
457 st_printk(KERN_ERR, stp,
458 "Can't get SCSI request.\n");
459 if (signal_pending(current))
460 stp->buffer->syscall_result = -EINTR;
461 else
462 stp->buffer->syscall_result = -EBUSY;
463 }
464
465 return streq;
466}
467
468static void st_release_request(struct st_request *streq)
469{
470 kfree(streq);
471}
472
473static void st_do_stats(struct scsi_tape *STp, struct request *req)
474{
475 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
476 ktime_t now;
477
478 now = ktime_get();
479 if (scmd->cmnd[0] == WRITE_6) {
480 now = ktime_sub(now, STp->stats->write_time);
481 atomic64_add(ktime_to_ns(now), &STp->stats->tot_write_time);
482 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
483 atomic64_inc(&STp->stats->write_cnt);
484 if (scmd->result) {
485 atomic64_add(atomic_read(&STp->stats->last_write_size)
486 - STp->buffer->cmdstat.residual,
487 &STp->stats->write_byte_cnt);
488 if (STp->buffer->cmdstat.residual > 0)
489 atomic64_inc(&STp->stats->resid_cnt);
490 } else
491 atomic64_add(atomic_read(&STp->stats->last_write_size),
492 &STp->stats->write_byte_cnt);
493 } else if (scmd->cmnd[0] == READ_6) {
494 now = ktime_sub(now, STp->stats->read_time);
495 atomic64_add(ktime_to_ns(now), &STp->stats->tot_read_time);
496 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
497 atomic64_inc(&STp->stats->read_cnt);
498 if (scmd->result) {
499 atomic64_add(atomic_read(&STp->stats->last_read_size)
500 - STp->buffer->cmdstat.residual,
501 &STp->stats->read_byte_cnt);
502 if (STp->buffer->cmdstat.residual > 0)
503 atomic64_inc(&STp->stats->resid_cnt);
504 } else
505 atomic64_add(atomic_read(&STp->stats->last_read_size),
506 &STp->stats->read_byte_cnt);
507 } else {
508 now = ktime_sub(now, STp->stats->other_time);
509 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
510 atomic64_inc(&STp->stats->other_cnt);
511 }
512 atomic64_dec(&STp->stats->in_flight);
513}
514
515static enum rq_end_io_ret st_scsi_execute_end(struct request *req,
516 blk_status_t status)
517{
518 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
519 struct st_request *SRpnt = req->end_io_data;
520 struct scsi_tape *STp = SRpnt->stp;
521 struct bio *tmp;
522
523 STp->buffer->cmdstat.midlevel_result = SRpnt->result = scmd->result;
524 STp->buffer->cmdstat.residual = scmd->resid_len;
525
526 st_do_stats(STp, req);
527
528 tmp = SRpnt->bio;
529 if (scmd->sense_len)
530 memcpy(SRpnt->sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
531 if (SRpnt->waiting)
532 complete(SRpnt->waiting);
533
534 blk_rq_unmap_user(tmp);
535 blk_mq_free_request(req);
536 return RQ_END_IO_NONE;
537}
538
539static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd,
540 int data_direction, void *buffer, unsigned bufflen,
541 int timeout, int retries)
542{
543 struct request *req;
544 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
545 int err = 0;
546 struct scsi_tape *STp = SRpnt->stp;
547 struct scsi_cmnd *scmd;
548
549 req = scsi_alloc_request(SRpnt->stp->device->request_queue,
550 data_direction == DMA_TO_DEVICE ?
551 REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0);
552 if (IS_ERR(req))
553 return PTR_ERR(req);
554 scmd = blk_mq_rq_to_pdu(req);
555 req->rq_flags |= RQF_QUIET;
556
557 mdata->null_mapped = 1;
558
559 if (bufflen) {
560 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen,
561 GFP_KERNEL);
562 if (err) {
563 blk_mq_free_request(req);
564 return err;
565 }
566 }
567
568 atomic64_inc(&STp->stats->in_flight);
569 if (cmd[0] == WRITE_6) {
570 atomic_set(&STp->stats->last_write_size, bufflen);
571 STp->stats->write_time = ktime_get();
572 } else if (cmd[0] == READ_6) {
573 atomic_set(&STp->stats->last_read_size, bufflen);
574 STp->stats->read_time = ktime_get();
575 } else {
576 STp->stats->other_time = ktime_get();
577 }
578
579 SRpnt->bio = req->bio;
580 scmd->cmd_len = COMMAND_SIZE(cmd[0]);
581 memcpy(scmd->cmnd, cmd, scmd->cmd_len);
582 req->timeout = timeout;
583 scmd->allowed = retries;
584 req->end_io = st_scsi_execute_end;
585 req->end_io_data = SRpnt;
586
587 blk_execute_rq_nowait(req, true);
588 return 0;
589}
590
591/* Do the scsi command. Waits until command performed if do_wait is true.
592 Otherwise write_behind_check() is used to check that the command
593 has finished. */
594static struct st_request *
595st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd,
596 int bytes, int direction, int timeout, int retries, int do_wait)
597{
598 struct completion *waiting;
599 struct rq_map_data *mdata = &STp->buffer->map_data;
600 int ret;
601
602 /* if async, make sure there's no command outstanding */
603 if (!do_wait && ((STp->buffer)->last_SRpnt)) {
604 st_printk(KERN_ERR, STp,
605 "Async command already active.\n");
606 if (signal_pending(current))
607 (STp->buffer)->syscall_result = (-EINTR);
608 else
609 (STp->buffer)->syscall_result = (-EBUSY);
610 return NULL;
611 }
612
613 if (!SRpnt) {
614 SRpnt = st_allocate_request(STp);
615 if (!SRpnt)
616 return NULL;
617 }
618
619 /* If async IO, set last_SRpnt. This ptr tells write_behind_check
620 which IO is outstanding. It's nulled out when the IO completes. */
621 if (!do_wait)
622 (STp->buffer)->last_SRpnt = SRpnt;
623
624 waiting = &STp->wait;
625 init_completion(waiting);
626 SRpnt->waiting = waiting;
627
628 if (STp->buffer->do_dio) {
629 mdata->page_order = 0;
630 mdata->nr_entries = STp->buffer->sg_segs;
631 mdata->pages = STp->buffer->mapped_pages;
632 } else {
633 mdata->page_order = STp->buffer->reserved_page_order;
634 mdata->nr_entries =
635 DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
636 mdata->pages = STp->buffer->reserved_pages;
637 mdata->offset = 0;
638 }
639
640 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
641 STp->buffer->cmdstat.have_sense = 0;
642 STp->buffer->syscall_result = 0;
643
644 ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout,
645 retries);
646 if (ret) {
647 /* could not allocate the buffer or request was too large */
648 (STp->buffer)->syscall_result = (-EBUSY);
649 (STp->buffer)->last_SRpnt = NULL;
650 } else if (do_wait) {
651 wait_for_completion(waiting);
652 SRpnt->waiting = NULL;
653 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
654 }
655
656 return SRpnt;
657}
658
659
660/* Handle the write-behind checking (waits for completion). Returns -ENOSPC if
661 write has been correct but EOM early warning reached, -EIO if write ended in
662 error or zero if write successful. Asynchronous writes are used only in
663 variable block mode. */
664static int write_behind_check(struct scsi_tape * STp)
665{
666 int retval = 0;
667 struct st_buffer *STbuffer;
668 struct st_partstat *STps;
669 struct st_cmdstatus *cmdstatp;
670 struct st_request *SRpnt;
671
672 STbuffer = STp->buffer;
673 if (!STbuffer->writing)
674 return 0;
675
676 DEB(
677 if (STp->write_pending)
678 STp->nbr_waits++;
679 else
680 STp->nbr_finished++;
681 ) /* end DEB */
682
683 wait_for_completion(&(STp->wait));
684 SRpnt = STbuffer->last_SRpnt;
685 STbuffer->last_SRpnt = NULL;
686 SRpnt->waiting = NULL;
687
688 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
689 st_release_request(SRpnt);
690
691 STbuffer->buffer_bytes -= STbuffer->writing;
692 STps = &(STp->ps[STp->partition]);
693 if (STps->drv_block >= 0) {
694 if (STp->block_size == 0)
695 STps->drv_block++;
696 else
697 STps->drv_block += STbuffer->writing / STp->block_size;
698 }
699
700 cmdstatp = &STbuffer->cmdstat;
701 if (STbuffer->syscall_result) {
702 retval = -EIO;
703 if (cmdstatp->have_sense && !cmdstatp->deferred &&
704 (cmdstatp->flags & SENSE_EOM) &&
705 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
706 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) {
707 /* EOM at write-behind, has all data been written? */
708 if (!cmdstatp->remainder_valid ||
709 cmdstatp->uremainder64 == 0)
710 retval = -ENOSPC;
711 }
712 if (retval == -EIO)
713 STps->drv_block = -1;
714 }
715 STbuffer->writing = 0;
716
717 DEB(if (debugging && retval)
718 st_printk(ST_DEB_MSG, STp,
719 "Async write error %x, return value %d.\n",
720 STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */
721
722 return retval;
723}
724
725
726/* Step over EOF if it has been inadvertently crossed (ioctl not used because
727 it messes up the block number). */
728static int cross_eof(struct scsi_tape * STp, int forward)
729{
730 struct st_request *SRpnt;
731 unsigned char cmd[MAX_COMMAND_SIZE];
732
733 cmd[0] = SPACE;
734 cmd[1] = 0x01; /* Space FileMarks */
735 if (forward) {
736 cmd[2] = cmd[3] = 0;
737 cmd[4] = 1;
738 } else
739 cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */
740 cmd[5] = 0;
741
742 DEBC_printk(STp, "Stepping over filemark %s.\n",
743 forward ? "forward" : "backward");
744
745 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
746 STp->device->request_queue->rq_timeout,
747 MAX_RETRIES, 1);
748 if (!SRpnt)
749 return (STp->buffer)->syscall_result;
750
751 st_release_request(SRpnt);
752 SRpnt = NULL;
753
754 if ((STp->buffer)->cmdstat.midlevel_result != 0)
755 st_printk(KERN_ERR, STp,
756 "Stepping over filemark %s failed.\n",
757 forward ? "forward" : "backward");
758
759 return (STp->buffer)->syscall_result;
760}
761
762
763/* Flush the write buffer (never need to write if variable blocksize). */
764static int st_flush_write_buffer(struct scsi_tape * STp)
765{
766 int transfer, blks;
767 int result;
768 unsigned char cmd[MAX_COMMAND_SIZE];
769 struct st_request *SRpnt;
770 struct st_partstat *STps;
771
772 result = write_behind_check(STp);
773 if (result)
774 return result;
775
776 result = 0;
777 if (STp->dirty == 1) {
778
779 transfer = STp->buffer->buffer_bytes;
780 DEBC_printk(STp, "Flushing %d bytes.\n", transfer);
781
782 memset(cmd, 0, MAX_COMMAND_SIZE);
783 cmd[0] = WRITE_6;
784 cmd[1] = 1;
785 blks = transfer / STp->block_size;
786 cmd[2] = blks >> 16;
787 cmd[3] = blks >> 8;
788 cmd[4] = blks;
789
790 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE,
791 STp->device->request_queue->rq_timeout,
792 MAX_WRITE_RETRIES, 1);
793 if (!SRpnt)
794 return (STp->buffer)->syscall_result;
795
796 STps = &(STp->ps[STp->partition]);
797 if ((STp->buffer)->syscall_result != 0) {
798 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
799
800 if (cmdstatp->have_sense && !cmdstatp->deferred &&
801 (cmdstatp->flags & SENSE_EOM) &&
802 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
803 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
804 (!cmdstatp->remainder_valid ||
805 cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */
806 STp->dirty = 0;
807 (STp->buffer)->buffer_bytes = 0;
808 if (STps->drv_block >= 0)
809 STps->drv_block += blks;
810 result = (-ENOSPC);
811 } else {
812 st_printk(KERN_ERR, STp, "Error on flush.\n");
813 STps->drv_block = (-1);
814 result = (-EIO);
815 }
816 } else {
817 if (STps->drv_block >= 0)
818 STps->drv_block += blks;
819 STp->dirty = 0;
820 (STp->buffer)->buffer_bytes = 0;
821 }
822 st_release_request(SRpnt);
823 SRpnt = NULL;
824 }
825 return result;
826}
827
828
829/* Flush the tape buffer. The tape will be positioned correctly unless
830 seek_next is true. */
831static int flush_buffer(struct scsi_tape *STp, int seek_next)
832{
833 int backspace, result;
834 struct st_partstat *STps;
835
836 /*
837 * If there was a bus reset, block further access
838 * to this device.
839 */
840 if (STp->pos_unknown)
841 return (-EIO);
842
843 if (STp->ready != ST_READY)
844 return 0;
845 STps = &(STp->ps[STp->partition]);
846 if (STps->rw == ST_WRITING) /* Writing */
847 return st_flush_write_buffer(STp);
848
849 if (STp->block_size == 0)
850 return 0;
851
852 backspace = ((STp->buffer)->buffer_bytes +
853 (STp->buffer)->read_pointer) / STp->block_size -
854 ((STp->buffer)->read_pointer + STp->block_size - 1) /
855 STp->block_size;
856 (STp->buffer)->buffer_bytes = 0;
857 (STp->buffer)->read_pointer = 0;
858 result = 0;
859 if (!seek_next) {
860 if (STps->eof == ST_FM_HIT) {
861 result = cross_eof(STp, 0); /* Back over the EOF hit */
862 if (!result)
863 STps->eof = ST_NOEOF;
864 else {
865 if (STps->drv_file >= 0)
866 STps->drv_file++;
867 STps->drv_block = 0;
868 }
869 }
870 if (!result && backspace > 0)
871 result = st_int_ioctl(STp, MTBSR, backspace);
872 } else if (STps->eof == ST_FM_HIT) {
873 if (STps->drv_file >= 0)
874 STps->drv_file++;
875 STps->drv_block = 0;
876 STps->eof = ST_NOEOF;
877 }
878 return result;
879
880}
881
882/* Set the mode parameters */
883static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm)
884{
885 int set_it = 0;
886 unsigned long arg;
887
888 if (!STp->density_changed &&
889 STm->default_density >= 0 &&
890 STm->default_density != STp->density) {
891 arg = STm->default_density;
892 set_it = 1;
893 } else
894 arg = STp->density;
895 arg <<= MT_ST_DENSITY_SHIFT;
896 if (!STp->blksize_changed &&
897 STm->default_blksize >= 0 &&
898 STm->default_blksize != STp->block_size) {
899 arg |= STm->default_blksize;
900 set_it = 1;
901 } else
902 arg |= STp->block_size;
903 if (set_it &&
904 st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) {
905 st_printk(KERN_WARNING, STp,
906 "Can't set default block size to %d bytes "
907 "and density %x.\n",
908 STm->default_blksize, STm->default_density);
909 if (modes_defined)
910 return (-EINVAL);
911 }
912 return 0;
913}
914
915
916/* Lock or unlock the drive door. Don't use when st_request allocated. */
917static int do_door_lock(struct scsi_tape * STp, int do_lock)
918{
919 int retval;
920
921 DEBC_printk(STp, "%socking drive door.\n", do_lock ? "L" : "Unl");
922
923 retval = scsi_set_medium_removal(STp->device,
924 do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW);
925 if (!retval)
926 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
927 else
928 STp->door_locked = ST_LOCK_FAILS;
929 return retval;
930}
931
932
933/* Set the internal state after reset */
934static void reset_state(struct scsi_tape *STp)
935{
936 int i;
937 struct st_partstat *STps;
938
939 STp->pos_unknown = 0;
940 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
941 STps = &(STp->ps[i]);
942 STps->rw = ST_IDLE;
943 STps->eof = ST_NOEOF;
944 STps->at_sm = 0;
945 STps->last_block_valid = 0;
946 STps->drv_block = -1;
947 STps->drv_file = -1;
948 }
949 if (STp->can_partitions) {
950 STp->partition = find_partition(STp);
951 if (STp->partition < 0)
952 STp->partition = 0;
953 STp->new_partition = STp->partition;
954 }
955}
956
957/* Test if the drive is ready. Returns either one of the codes below or a negative system
958 error code. */
959#define CHKRES_READY 0
960#define CHKRES_NEW_SESSION 1
961#define CHKRES_NOT_READY 2
962#define CHKRES_NO_TAPE 3
963
964#define MAX_ATTENTIONS 10
965
966static int test_ready(struct scsi_tape *STp, int do_wait)
967{
968 int attentions, waits, max_wait, scode;
969 int retval = CHKRES_READY, new_session = 0;
970 unsigned char cmd[MAX_COMMAND_SIZE];
971 struct st_request *SRpnt = NULL;
972 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
973
974 max_wait = do_wait ? ST_BLOCK_SECONDS : 0;
975
976 for (attentions=waits=0; ; ) {
977 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
978 cmd[0] = TEST_UNIT_READY;
979 SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
980 STp->long_timeout, MAX_READY_RETRIES, 1);
981
982 if (!SRpnt) {
983 retval = (STp->buffer)->syscall_result;
984 break;
985 }
986
987 if (cmdstatp->have_sense) {
988
989 scode = cmdstatp->sense_hdr.sense_key;
990
991 if (scode == UNIT_ATTENTION) { /* New media? */
992 new_session = 1;
993 if (attentions < MAX_ATTENTIONS) {
994 attentions++;
995 continue;
996 }
997 else {
998 retval = (-EIO);
999 break;
1000 }
1001 }
1002
1003 if (scode == NOT_READY) {
1004 if (waits < max_wait) {
1005 if (msleep_interruptible(1000)) {
1006 retval = (-EINTR);
1007 break;
1008 }
1009 waits++;
1010 continue;
1011 }
1012 else {
1013 if ((STp->device)->scsi_level >= SCSI_2 &&
1014 cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */
1015 retval = CHKRES_NO_TAPE;
1016 else
1017 retval = CHKRES_NOT_READY;
1018 break;
1019 }
1020 }
1021 }
1022
1023 retval = (STp->buffer)->syscall_result;
1024 if (!retval)
1025 retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY;
1026 break;
1027 }
1028
1029 if (SRpnt != NULL)
1030 st_release_request(SRpnt);
1031 return retval;
1032}
1033
1034
1035/* See if the drive is ready and gather information about the tape. Return values:
1036 < 0 negative error code from errno.h
1037 0 drive ready
1038 1 drive not ready (possibly no tape)
1039*/
1040static int check_tape(struct scsi_tape *STp, struct file *filp)
1041{
1042 int i, retval, new_session = 0, do_wait;
1043 unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning;
1044 unsigned short st_flags = filp->f_flags;
1045 struct st_request *SRpnt = NULL;
1046 struct st_modedef *STm;
1047 struct st_partstat *STps;
1048 struct inode *inode = file_inode(filp);
1049 int mode = TAPE_MODE(inode);
1050
1051 STp->ready = ST_READY;
1052
1053 if (mode != STp->current_mode) {
1054 DEBC_printk(STp, "Mode change from %d to %d.\n",
1055 STp->current_mode, mode);
1056 new_session = 1;
1057 STp->current_mode = mode;
1058 }
1059 STm = &(STp->modes[STp->current_mode]);
1060
1061 saved_cleaning = STp->cleaning_req;
1062 STp->cleaning_req = 0;
1063
1064 do_wait = ((filp->f_flags & O_NONBLOCK) == 0);
1065 retval = test_ready(STp, do_wait);
1066
1067 if (retval < 0)
1068 goto err_out;
1069
1070 if (retval == CHKRES_NEW_SESSION) {
1071 STp->pos_unknown = 0;
1072 STp->partition = STp->new_partition = 0;
1073 if (STp->can_partitions)
1074 STp->nbr_partitions = 1; /* This guess will be updated later
1075 if necessary */
1076 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1077 STps = &(STp->ps[i]);
1078 STps->rw = ST_IDLE;
1079 STps->eof = ST_NOEOF;
1080 STps->at_sm = 0;
1081 STps->last_block_valid = 0;
1082 STps->drv_block = 0;
1083 STps->drv_file = 0;
1084 }
1085 new_session = 1;
1086 }
1087 else {
1088 STp->cleaning_req |= saved_cleaning;
1089
1090 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) {
1091 if (retval == CHKRES_NO_TAPE)
1092 STp->ready = ST_NO_TAPE;
1093 else
1094 STp->ready = ST_NOT_READY;
1095
1096 STp->density = 0; /* Clear the erroneous "residue" */
1097 STp->write_prot = 0;
1098 STp->block_size = 0;
1099 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
1100 STp->partition = STp->new_partition = 0;
1101 STp->door_locked = ST_UNLOCKED;
1102 return CHKRES_NOT_READY;
1103 }
1104 }
1105
1106 if (STp->omit_blklims)
1107 STp->min_block = STp->max_block = (-1);
1108 else {
1109 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1110 cmd[0] = READ_BLOCK_LIMITS;
1111
1112 SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE,
1113 STp->device->request_queue->rq_timeout,
1114 MAX_READY_RETRIES, 1);
1115 if (!SRpnt) {
1116 retval = (STp->buffer)->syscall_result;
1117 goto err_out;
1118 }
1119
1120 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) {
1121 STp->max_block = ((STp->buffer)->b_data[1] << 16) |
1122 ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3];
1123 STp->min_block = ((STp->buffer)->b_data[4] << 8) |
1124 (STp->buffer)->b_data[5];
1125 if ( DEB( debugging || ) !STp->inited)
1126 st_printk(KERN_INFO, STp,
1127 "Block limits %d - %d bytes.\n",
1128 STp->min_block, STp->max_block);
1129 } else {
1130 STp->min_block = STp->max_block = (-1);
1131 DEBC_printk(STp, "Can't read block limits.\n");
1132 }
1133 }
1134
1135 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1136 cmd[0] = MODE_SENSE;
1137 cmd[4] = 12;
1138
1139 SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE,
1140 STp->device->request_queue->rq_timeout,
1141 MAX_READY_RETRIES, 1);
1142 if (!SRpnt) {
1143 retval = (STp->buffer)->syscall_result;
1144 goto err_out;
1145 }
1146
1147 if ((STp->buffer)->syscall_result != 0) {
1148 DEBC_printk(STp, "No Mode Sense.\n");
1149 STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */
1150 (STp->buffer)->syscall_result = 0; /* Prevent error propagation */
1151 STp->drv_write_prot = 0;
1152 } else {
1153 DEBC_printk(STp,"Mode sense. Length %d, "
1154 "medium %x, WBS %x, BLL %d\n",
1155 (STp->buffer)->b_data[0],
1156 (STp->buffer)->b_data[1],
1157 (STp->buffer)->b_data[2],
1158 (STp->buffer)->b_data[3]);
1159
1160 if ((STp->buffer)->b_data[3] >= 8) {
1161 STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7;
1162 STp->density = (STp->buffer)->b_data[4];
1163 STp->block_size = (STp->buffer)->b_data[9] * 65536 +
1164 (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11];
1165 DEBC_printk(STp, "Density %x, tape length: %x, "
1166 "drv buffer: %d\n",
1167 STp->density,
1168 (STp->buffer)->b_data[5] * 65536 +
1169 (STp->buffer)->b_data[6] * 256 +
1170 (STp->buffer)->b_data[7],
1171 STp->drv_buffer);
1172 }
1173 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
1174 if (!STp->drv_buffer && STp->immediate_filemark) {
1175 st_printk(KERN_WARNING, STp,
1176 "non-buffered tape: disabling "
1177 "writing immediate filemarks\n");
1178 STp->immediate_filemark = 0;
1179 }
1180 }
1181 st_release_request(SRpnt);
1182 SRpnt = NULL;
1183 STp->inited = 1;
1184
1185 if (STp->block_size > 0)
1186 (STp->buffer)->buffer_blocks =
1187 (STp->buffer)->buffer_size / STp->block_size;
1188 else
1189 (STp->buffer)->buffer_blocks = 1;
1190 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
1191
1192 DEBC_printk(STp, "Block size: %d, buffer size: %d (%d blocks).\n",
1193 STp->block_size, (STp->buffer)->buffer_size,
1194 (STp->buffer)->buffer_blocks);
1195
1196 if (STp->drv_write_prot) {
1197 STp->write_prot = 1;
1198
1199 DEBC_printk(STp, "Write protected\n");
1200
1201 if (do_wait &&
1202 ((st_flags & O_ACCMODE) == O_WRONLY ||
1203 (st_flags & O_ACCMODE) == O_RDWR)) {
1204 retval = (-EROFS);
1205 goto err_out;
1206 }
1207 }
1208
1209 if (STp->can_partitions && STp->nbr_partitions < 1) {
1210 /* This code is reached when the device is opened for the first time
1211 after the driver has been initialized with tape in the drive and the
1212 partition support has been enabled. */
1213 DEBC_printk(STp, "Updating partition number in status.\n");
1214 if ((STp->partition = find_partition(STp)) < 0) {
1215 retval = STp->partition;
1216 goto err_out;
1217 }
1218 STp->new_partition = STp->partition;
1219 STp->nbr_partitions = 1; /* This guess will be updated when necessary */
1220 }
1221
1222 if (new_session) { /* Change the drive parameters for the new mode */
1223 STp->density_changed = STp->blksize_changed = 0;
1224 STp->compression_changed = 0;
1225 if (!(STm->defaults_for_writes) &&
1226 (retval = set_mode_densblk(STp, STm)) < 0)
1227 goto err_out;
1228
1229 if (STp->default_drvbuffer != 0xff) {
1230 if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer))
1231 st_printk(KERN_WARNING, STp,
1232 "Can't set default drive "
1233 "buffering to %d.\n",
1234 STp->default_drvbuffer);
1235 }
1236 }
1237
1238 return CHKRES_READY;
1239
1240 err_out:
1241 return retval;
1242}
1243
1244
1245 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host
1246 module count. */
1247static int st_open(struct inode *inode, struct file *filp)
1248{
1249 int i, retval = (-EIO);
1250 int resumed = 0;
1251 struct scsi_tape *STp;
1252 struct st_partstat *STps;
1253 int dev = TAPE_NR(inode);
1254
1255 /*
1256 * We really want to do nonseekable_open(inode, filp); here, but some
1257 * versions of tar incorrectly call lseek on tapes and bail out if that
1258 * fails. So we disallow pread() and pwrite(), but permit lseeks.
1259 */
1260 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
1261
1262 if (!(STp = scsi_tape_get(dev))) {
1263 return -ENXIO;
1264 }
1265
1266 filp->private_data = STp;
1267
1268 spin_lock(&st_use_lock);
1269 if (STp->in_use) {
1270 spin_unlock(&st_use_lock);
1271 DEBC_printk(STp, "Device already in use.\n");
1272 scsi_tape_put(STp);
1273 return (-EBUSY);
1274 }
1275
1276 STp->in_use = 1;
1277 spin_unlock(&st_use_lock);
1278 STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0;
1279
1280 if (scsi_autopm_get_device(STp->device) < 0) {
1281 retval = -EIO;
1282 goto err_out;
1283 }
1284 resumed = 1;
1285 if (!scsi_block_when_processing_errors(STp->device)) {
1286 retval = (-ENXIO);
1287 goto err_out;
1288 }
1289
1290 /* See that we have at least a one page buffer available */
1291 if (!enlarge_buffer(STp->buffer, PAGE_SIZE)) {
1292 st_printk(KERN_WARNING, STp,
1293 "Can't allocate one page tape buffer.\n");
1294 retval = (-EOVERFLOW);
1295 goto err_out;
1296 }
1297
1298 (STp->buffer)->cleared = 0;
1299 (STp->buffer)->writing = 0;
1300 (STp->buffer)->syscall_result = 0;
1301
1302 STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY);
1303
1304 STp->dirty = 0;
1305 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1306 STps = &(STp->ps[i]);
1307 STps->rw = ST_IDLE;
1308 }
1309 STp->try_dio_now = STp->try_dio;
1310 STp->recover_count = 0;
1311 DEB( STp->nbr_waits = STp->nbr_finished = 0;
1312 STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; )
1313
1314 retval = check_tape(STp, filp);
1315 if (retval < 0)
1316 goto err_out;
1317 if ((filp->f_flags & O_NONBLOCK) == 0 &&
1318 retval != CHKRES_READY) {
1319 if (STp->ready == NO_TAPE)
1320 retval = (-ENOMEDIUM);
1321 else
1322 retval = (-EIO);
1323 goto err_out;
1324 }
1325 return 0;
1326
1327 err_out:
1328 normalize_buffer(STp->buffer);
1329 spin_lock(&st_use_lock);
1330 STp->in_use = 0;
1331 spin_unlock(&st_use_lock);
1332 if (resumed)
1333 scsi_autopm_put_device(STp->device);
1334 scsi_tape_put(STp);
1335 return retval;
1336
1337}
1338
1339
1340/* Flush the tape buffer before close */
1341static int st_flush(struct file *filp, fl_owner_t id)
1342{
1343 int result = 0, result2;
1344 unsigned char cmd[MAX_COMMAND_SIZE];
1345 struct st_request *SRpnt;
1346 struct scsi_tape *STp = filp->private_data;
1347 struct st_modedef *STm = &(STp->modes[STp->current_mode]);
1348 struct st_partstat *STps = &(STp->ps[STp->partition]);
1349
1350 if (file_count(filp) > 1)
1351 return 0;
1352
1353 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1354 result = st_flush_write_buffer(STp);
1355 if (result != 0 && result != (-ENOSPC))
1356 goto out;
1357 }
1358
1359 if (STp->can_partitions &&
1360 (result2 = switch_partition(STp)) < 0) {
1361 DEBC_printk(STp, "switch_partition at close failed.\n");
1362 if (result == 0)
1363 result = result2;
1364 goto out;
1365 }
1366
1367 DEBC( if (STp->nbr_requests)
1368 st_printk(KERN_DEBUG, STp,
1369 "Number of r/w requests %d, dio used in %d, "
1370 "pages %d.\n", STp->nbr_requests, STp->nbr_dio,
1371 STp->nbr_pages));
1372
1373 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1374 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1375
1376#if DEBUG
1377 DEBC_printk(STp, "Async write waits %d, finished %d.\n",
1378 STp->nbr_waits, STp->nbr_finished);
1379#endif
1380 memset(cmd, 0, MAX_COMMAND_SIZE);
1381 cmd[0] = WRITE_FILEMARKS;
1382 if (STp->immediate_filemark)
1383 cmd[1] = 1;
1384 cmd[4] = 1 + STp->two_fm;
1385
1386 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
1387 STp->device->request_queue->rq_timeout,
1388 MAX_WRITE_RETRIES, 1);
1389 if (!SRpnt) {
1390 result = (STp->buffer)->syscall_result;
1391 goto out;
1392 }
1393
1394 if (STp->buffer->syscall_result == 0 ||
1395 (cmdstatp->have_sense && !cmdstatp->deferred &&
1396 (cmdstatp->flags & SENSE_EOM) &&
1397 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
1398 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
1399 (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) {
1400 /* Write successful at EOM */
1401 st_release_request(SRpnt);
1402 SRpnt = NULL;
1403 if (STps->drv_file >= 0)
1404 STps->drv_file++;
1405 STps->drv_block = 0;
1406 if (STp->two_fm)
1407 cross_eof(STp, 0);
1408 STps->eof = ST_FM;
1409 }
1410 else { /* Write error */
1411 st_release_request(SRpnt);
1412 SRpnt = NULL;
1413 st_printk(KERN_ERR, STp,
1414 "Error on write filemark.\n");
1415 if (result == 0)
1416 result = (-EIO);
1417 }
1418
1419 DEBC_printk(STp, "Buffer flushed, %d EOF(s) written\n", cmd[4]);
1420 } else if (!STp->rew_at_close) {
1421 STps = &(STp->ps[STp->partition]);
1422 if (!STm->sysv || STps->rw != ST_READING) {
1423 if (STp->can_bsr)
1424 result = flush_buffer(STp, 0);
1425 else if (STps->eof == ST_FM_HIT) {
1426 result = cross_eof(STp, 0);
1427 if (result) {
1428 if (STps->drv_file >= 0)
1429 STps->drv_file++;
1430 STps->drv_block = 0;
1431 STps->eof = ST_FM;
1432 } else
1433 STps->eof = ST_NOEOF;
1434 }
1435 } else if ((STps->eof == ST_NOEOF &&
1436 !(result = cross_eof(STp, 1))) ||
1437 STps->eof == ST_FM_HIT) {
1438 if (STps->drv_file >= 0)
1439 STps->drv_file++;
1440 STps->drv_block = 0;
1441 STps->eof = ST_FM;
1442 }
1443 }
1444
1445 out:
1446 if (STp->rew_at_close) {
1447 result2 = st_int_ioctl(STp, MTREW, 1);
1448 if (result == 0)
1449 result = result2;
1450 }
1451 return result;
1452}
1453
1454
1455/* Close the device and release it. BKL is not needed: this is the only thread
1456 accessing this tape. */
1457static int st_release(struct inode *inode, struct file *filp)
1458{
1459 struct scsi_tape *STp = filp->private_data;
1460
1461 if (STp->door_locked == ST_LOCKED_AUTO)
1462 do_door_lock(STp, 0);
1463
1464 normalize_buffer(STp->buffer);
1465 spin_lock(&st_use_lock);
1466 STp->in_use = 0;
1467 spin_unlock(&st_use_lock);
1468 scsi_autopm_put_device(STp->device);
1469 scsi_tape_put(STp);
1470
1471 return 0;
1472}
1473
1474/* The checks common to both reading and writing */
1475static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
1476{
1477 ssize_t retval = 0;
1478
1479 /*
1480 * If we are in the middle of error recovery, don't let anyone
1481 * else try and use this device. Also, if error recovery fails, it
1482 * may try and take the device offline, in which case all further
1483 * access to the device is prohibited.
1484 */
1485 if (!scsi_block_when_processing_errors(STp->device)) {
1486 retval = (-ENXIO);
1487 goto out;
1488 }
1489
1490 if (STp->ready != ST_READY) {
1491 if (STp->ready == ST_NO_TAPE)
1492 retval = (-ENOMEDIUM);
1493 else
1494 retval = (-EIO);
1495 goto out;
1496 }
1497
1498 if (! STp->modes[STp->current_mode].defined) {
1499 retval = (-ENXIO);
1500 goto out;
1501 }
1502
1503
1504 /*
1505 * If there was a bus reset, block further access
1506 * to this device.
1507 */
1508 if (STp->pos_unknown) {
1509 retval = (-EIO);
1510 goto out;
1511 }
1512
1513 if (count == 0)
1514 goto out;
1515
1516 DEB(
1517 if (!STp->in_use) {
1518 st_printk(ST_DEB_MSG, STp,
1519 "Incorrect device.\n");
1520 retval = (-EIO);
1521 goto out;
1522 } ) /* end DEB */
1523
1524 if (STp->can_partitions &&
1525 (retval = switch_partition(STp)) < 0)
1526 goto out;
1527
1528 if (STp->block_size == 0 && STp->max_block > 0 &&
1529 (count < STp->min_block || count > STp->max_block)) {
1530 retval = (-EINVAL);
1531 goto out;
1532 }
1533
1534 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED &&
1535 !do_door_lock(STp, 1))
1536 STp->door_locked = ST_LOCKED_AUTO;
1537
1538 out:
1539 return retval;
1540}
1541
1542
1543static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
1544 size_t count, int is_read)
1545{
1546 int i, bufsize, retval = 0;
1547 struct st_buffer *STbp = STp->buffer;
1548
1549 if (is_read)
1550 i = STp->try_dio_now && try_rdio;
1551 else
1552 i = STp->try_dio_now && try_wdio;
1553
1554 if (i && ((unsigned long)buf & queue_dma_alignment(
1555 STp->device->request_queue)) == 0) {
1556 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf,
1557 count, (is_read ? READ : WRITE));
1558 if (i > 0) {
1559 STbp->do_dio = i;
1560 STbp->buffer_bytes = 0; /* can be used as transfer counter */
1561 }
1562 else
1563 STbp->do_dio = 0; /* fall back to buffering with any error */
1564 STbp->sg_segs = STbp->do_dio;
1565 DEB(
1566 if (STbp->do_dio) {
1567 STp->nbr_dio++;
1568 STp->nbr_pages += STbp->do_dio;
1569 }
1570 )
1571 } else
1572 STbp->do_dio = 0;
1573 DEB( STp->nbr_requests++; )
1574
1575 if (!STbp->do_dio) {
1576 if (STp->block_size)
1577 bufsize = STp->block_size > st_fixed_buffer_size ?
1578 STp->block_size : st_fixed_buffer_size;
1579 else {
1580 bufsize = count;
1581 /* Make sure that data from previous user is not leaked even if
1582 HBA does not return correct residual */
1583 if (is_read && STp->sili && !STbp->cleared)
1584 clear_buffer(STbp);
1585 }
1586
1587 if (bufsize > STbp->buffer_size &&
1588 !enlarge_buffer(STbp, bufsize)) {
1589 st_printk(KERN_WARNING, STp,
1590 "Can't allocate %d byte tape buffer.\n",
1591 bufsize);
1592 retval = (-EOVERFLOW);
1593 goto out;
1594 }
1595 if (STp->block_size)
1596 STbp->buffer_blocks = bufsize / STp->block_size;
1597 }
1598
1599 out:
1600 return retval;
1601}
1602
1603
1604/* Can be called more than once after each setup_buffer() */
1605static void release_buffering(struct scsi_tape *STp, int is_read)
1606{
1607 struct st_buffer *STbp;
1608
1609 STbp = STp->buffer;
1610 if (STbp->do_dio) {
1611 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read);
1612 STbp->do_dio = 0;
1613 STbp->sg_segs = 0;
1614 }
1615}
1616
1617
1618/* Write command */
1619static ssize_t
1620st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
1621{
1622 ssize_t total;
1623 ssize_t i, do_count, blks, transfer;
1624 ssize_t retval;
1625 int undone, retry_eot = 0, scode;
1626 int async_write;
1627 unsigned char cmd[MAX_COMMAND_SIZE];
1628 const char __user *b_point;
1629 struct st_request *SRpnt = NULL;
1630 struct scsi_tape *STp = filp->private_data;
1631 struct st_modedef *STm;
1632 struct st_partstat *STps;
1633 struct st_buffer *STbp;
1634
1635 if (mutex_lock_interruptible(&STp->lock))
1636 return -ERESTARTSYS;
1637
1638 retval = rw_checks(STp, filp, count);
1639 if (retval || count == 0)
1640 goto out;
1641
1642 /* Write must be integral number of blocks */
1643 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
1644 st_printk(KERN_WARNING, STp,
1645 "Write not multiple of tape block size.\n");
1646 retval = (-EINVAL);
1647 goto out;
1648 }
1649
1650 STm = &(STp->modes[STp->current_mode]);
1651 STps = &(STp->ps[STp->partition]);
1652
1653 if (STp->write_prot) {
1654 retval = (-EACCES);
1655 goto out;
1656 }
1657
1658
1659 if (STps->rw == ST_READING) {
1660 retval = flush_buffer(STp, 0);
1661 if (retval)
1662 goto out;
1663 STps->rw = ST_WRITING;
1664 } else if (STps->rw != ST_WRITING &&
1665 STps->drv_file == 0 && STps->drv_block == 0) {
1666 if ((retval = set_mode_densblk(STp, STm)) < 0)
1667 goto out;
1668 if (STm->default_compression != ST_DONT_TOUCH &&
1669 !(STp->compression_changed)) {
1670 if (st_compression(STp, (STm->default_compression == ST_YES))) {
1671 st_printk(KERN_WARNING, STp,
1672 "Can't set default compression.\n");
1673 if (modes_defined) {
1674 retval = (-EINVAL);
1675 goto out;
1676 }
1677 }
1678 }
1679 }
1680
1681 STbp = STp->buffer;
1682 i = write_behind_check(STp);
1683 if (i) {
1684 if (i == -ENOSPC)
1685 STps->eof = ST_EOM_OK;
1686 else
1687 STps->eof = ST_EOM_ERROR;
1688 }
1689
1690 if (STps->eof == ST_EOM_OK) {
1691 STps->eof = ST_EOD_1; /* allow next write */
1692 retval = (-ENOSPC);
1693 goto out;
1694 }
1695 else if (STps->eof == ST_EOM_ERROR) {
1696 retval = (-EIO);
1697 goto out;
1698 }
1699
1700 /* Check the buffer readability in cases where copy_user might catch
1701 the problems after some tape movement. */
1702 if (STp->block_size != 0 &&
1703 !STbp->do_dio &&
1704 (copy_from_user(&i, buf, 1) != 0 ||
1705 copy_from_user(&i, buf + count - 1, 1) != 0)) {
1706 retval = (-EFAULT);
1707 goto out;
1708 }
1709
1710 retval = setup_buffering(STp, buf, count, 0);
1711 if (retval)
1712 goto out;
1713
1714 total = count;
1715
1716 memset(cmd, 0, MAX_COMMAND_SIZE);
1717 cmd[0] = WRITE_6;
1718 cmd[1] = (STp->block_size != 0);
1719
1720 STps->rw = ST_WRITING;
1721
1722 b_point = buf;
1723 while (count > 0 && !retry_eot) {
1724
1725 if (STbp->do_dio) {
1726 do_count = count;
1727 }
1728 else {
1729 if (STp->block_size == 0)
1730 do_count = count;
1731 else {
1732 do_count = STbp->buffer_blocks * STp->block_size -
1733 STbp->buffer_bytes;
1734 if (do_count > count)
1735 do_count = count;
1736 }
1737
1738 i = append_to_buffer(b_point, STbp, do_count);
1739 if (i) {
1740 retval = i;
1741 goto out;
1742 }
1743 }
1744 count -= do_count;
1745 b_point += do_count;
1746
1747 async_write = STp->block_size == 0 && !STbp->do_dio &&
1748 STm->do_async_writes && STps->eof < ST_EOM_OK;
1749
1750 if (STp->block_size != 0 && STm->do_buffer_writes &&
1751 !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
1752 STbp->buffer_bytes < STbp->buffer_size) {
1753 STp->dirty = 1;
1754 /* Don't write a buffer that is not full enough. */
1755 if (!async_write && count == 0)
1756 break;
1757 }
1758
1759 retry_write:
1760 if (STp->block_size == 0)
1761 blks = transfer = do_count;
1762 else {
1763 if (!STbp->do_dio)
1764 blks = STbp->buffer_bytes;
1765 else
1766 blks = do_count;
1767 blks /= STp->block_size;
1768 transfer = blks * STp->block_size;
1769 }
1770 cmd[2] = blks >> 16;
1771 cmd[3] = blks >> 8;
1772 cmd[4] = blks;
1773
1774 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
1775 STp->device->request_queue->rq_timeout,
1776 MAX_WRITE_RETRIES, !async_write);
1777 if (!SRpnt) {
1778 retval = STbp->syscall_result;
1779 goto out;
1780 }
1781 if (async_write && !STbp->syscall_result) {
1782 STbp->writing = transfer;
1783 STp->dirty = !(STbp->writing ==
1784 STbp->buffer_bytes);
1785 SRpnt = NULL; /* Prevent releasing this request! */
1786 DEB( STp->write_pending = 1; )
1787 break;
1788 }
1789
1790 if (STbp->syscall_result != 0) {
1791 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1792
1793 DEBC_printk(STp, "Error on write:\n");
1794 if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) {
1795 scode = cmdstatp->sense_hdr.sense_key;
1796 if (cmdstatp->remainder_valid)
1797 undone = (int)cmdstatp->uremainder64;
1798 else if (STp->block_size == 0 &&
1799 scode == VOLUME_OVERFLOW)
1800 undone = transfer;
1801 else
1802 undone = 0;
1803 if (STp->block_size != 0)
1804 undone *= STp->block_size;
1805 if (undone <= do_count) {
1806 /* Only data from this write is not written */
1807 count += undone;
1808 b_point -= undone;
1809 do_count -= undone;
1810 if (STp->block_size)
1811 blks = (transfer - undone) / STp->block_size;
1812 STps->eof = ST_EOM_OK;
1813 /* Continue in fixed block mode if all written
1814 in this request but still something left to write
1815 (retval left to zero)
1816 */
1817 if (STp->block_size == 0 ||
1818 undone > 0 || count == 0)
1819 retval = (-ENOSPC); /* EOM within current request */
1820 DEBC_printk(STp, "EOM with %d "
1821 "bytes unwritten.\n",
1822 (int)count);
1823 } else {
1824 /* EOT within data buffered earlier (possible only
1825 in fixed block mode without direct i/o) */
1826 if (!retry_eot && !cmdstatp->deferred &&
1827 (scode == NO_SENSE || scode == RECOVERED_ERROR)) {
1828 move_buffer_data(STp->buffer, transfer - undone);
1829 retry_eot = 1;
1830 if (STps->drv_block >= 0) {
1831 STps->drv_block += (transfer - undone) /
1832 STp->block_size;
1833 }
1834 STps->eof = ST_EOM_OK;
1835 DEBC_printk(STp, "Retry "
1836 "write of %d "
1837 "bytes at EOM.\n",
1838 STp->buffer->buffer_bytes);
1839 goto retry_write;
1840 }
1841 else {
1842 /* Either error within data buffered by driver or
1843 failed retry */
1844 count -= do_count;
1845 blks = do_count = 0;
1846 STps->eof = ST_EOM_ERROR;
1847 STps->drv_block = (-1); /* Too cautious? */
1848 retval = (-EIO); /* EOM for old data */
1849 DEBC_printk(STp, "EOM with "
1850 "lost data.\n");
1851 }
1852 }
1853 } else {
1854 count += do_count;
1855 STps->drv_block = (-1); /* Too cautious? */
1856 retval = STbp->syscall_result;
1857 }
1858
1859 }
1860
1861 if (STps->drv_block >= 0) {
1862 if (STp->block_size == 0)
1863 STps->drv_block += (do_count > 0);
1864 else
1865 STps->drv_block += blks;
1866 }
1867
1868 STbp->buffer_bytes = 0;
1869 STp->dirty = 0;
1870
1871 if (retval || retry_eot) {
1872 if (count < total)
1873 retval = total - count;
1874 goto out;
1875 }
1876 }
1877
1878 if (STps->eof == ST_EOD_1)
1879 STps->eof = ST_EOM_OK;
1880 else if (STps->eof != ST_EOM_OK)
1881 STps->eof = ST_NOEOF;
1882 retval = total - count;
1883
1884 out:
1885 if (SRpnt != NULL)
1886 st_release_request(SRpnt);
1887 release_buffering(STp, 0);
1888 mutex_unlock(&STp->lock);
1889
1890 return retval;
1891}
1892
1893/* Read data from the tape. Returns zero in the normal case, one if the
1894 eof status has changed, and the negative error code in case of a
1895 fatal error. Otherwise updates the buffer and the eof state.
1896
1897 Does release user buffer mapping if it is set.
1898*/
1899static long read_tape(struct scsi_tape *STp, long count,
1900 struct st_request ** aSRpnt)
1901{
1902 int transfer, blks, bytes;
1903 unsigned char cmd[MAX_COMMAND_SIZE];
1904 struct st_request *SRpnt;
1905 struct st_modedef *STm;
1906 struct st_partstat *STps;
1907 struct st_buffer *STbp;
1908 int retval = 0;
1909
1910 if (count == 0)
1911 return 0;
1912
1913 STm = &(STp->modes[STp->current_mode]);
1914 STps = &(STp->ps[STp->partition]);
1915 if (STps->eof == ST_FM_HIT)
1916 return 1;
1917 STbp = STp->buffer;
1918
1919 if (STp->block_size == 0)
1920 blks = bytes = count;
1921 else {
1922 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
1923 blks = (STp->buffer)->buffer_blocks;
1924 bytes = blks * STp->block_size;
1925 } else {
1926 bytes = count;
1927 if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size)
1928 bytes = (STp->buffer)->buffer_size;
1929 blks = bytes / STp->block_size;
1930 bytes = blks * STp->block_size;
1931 }
1932 }
1933
1934 memset(cmd, 0, MAX_COMMAND_SIZE);
1935 cmd[0] = READ_6;
1936 cmd[1] = (STp->block_size != 0);
1937 if (!cmd[1] && STp->sili)
1938 cmd[1] |= 2;
1939 cmd[2] = blks >> 16;
1940 cmd[3] = blks >> 8;
1941 cmd[4] = blks;
1942
1943 SRpnt = *aSRpnt;
1944 SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE,
1945 STp->device->request_queue->rq_timeout,
1946 MAX_RETRIES, 1);
1947 release_buffering(STp, 1);
1948 *aSRpnt = SRpnt;
1949 if (!SRpnt)
1950 return STbp->syscall_result;
1951
1952 STbp->read_pointer = 0;
1953 STps->at_sm = 0;
1954
1955 /* Something to check */
1956 if (STbp->syscall_result) {
1957 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1958
1959 retval = 1;
1960 DEBC_printk(STp,
1961 "Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1962 SRpnt->sense[0], SRpnt->sense[1],
1963 SRpnt->sense[2], SRpnt->sense[3],
1964 SRpnt->sense[4], SRpnt->sense[5],
1965 SRpnt->sense[6], SRpnt->sense[7]);
1966 if (cmdstatp->have_sense) {
1967
1968 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
1969 cmdstatp->flags &= 0xcf; /* No need for EOM in this case */
1970
1971 if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */
1972 /* Compute the residual count */
1973 if (cmdstatp->remainder_valid)
1974 transfer = (int)cmdstatp->uremainder64;
1975 else
1976 transfer = 0;
1977 if (cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR) {
1978 if (STp->block_size == 0)
1979 transfer = bytes;
1980 /* Some drives set ILI with MEDIUM ERROR */
1981 cmdstatp->flags &= ~SENSE_ILI;
1982 }
1983
1984 if (cmdstatp->flags & SENSE_ILI) { /* ILI */
1985 if (STp->block_size == 0 &&
1986 transfer < 0) {
1987 st_printk(KERN_NOTICE, STp,
1988 "Failed to read %d "
1989 "byte block with %d "
1990 "byte transfer.\n",
1991 bytes - transfer,
1992 bytes);
1993 if (STps->drv_block >= 0)
1994 STps->drv_block += 1;
1995 STbp->buffer_bytes = 0;
1996 return (-ENOMEM);
1997 } else if (STp->block_size == 0) {
1998 STbp->buffer_bytes = bytes - transfer;
1999 } else {
2000 st_release_request(SRpnt);
2001 SRpnt = *aSRpnt = NULL;
2002 if (transfer == blks) { /* We did not get anything, error */
2003 st_printk(KERN_NOTICE, STp,
2004 "Incorrect "
2005 "block size.\n");
2006 if (STps->drv_block >= 0)
2007 STps->drv_block += blks - transfer + 1;
2008 st_int_ioctl(STp, MTBSR, 1);
2009 return (-EIO);
2010 }
2011 /* We have some data, deliver it */
2012 STbp->buffer_bytes = (blks - transfer) *
2013 STp->block_size;
2014 DEBC_printk(STp, "ILI but "
2015 "enough data "
2016 "received %ld "
2017 "%d.\n", count,
2018 STbp->buffer_bytes);
2019 if (STps->drv_block >= 0)
2020 STps->drv_block += 1;
2021 if (st_int_ioctl(STp, MTBSR, 1))
2022 return (-EIO);
2023 }
2024 } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */
2025 if (STps->eof != ST_FM_HIT)
2026 STps->eof = ST_FM_HIT;
2027 else
2028 STps->eof = ST_EOD_2;
2029 if (STp->block_size == 0)
2030 STbp->buffer_bytes = 0;
2031 else
2032 STbp->buffer_bytes =
2033 bytes - transfer * STp->block_size;
2034 DEBC_printk(STp, "EOF detected (%d "
2035 "bytes read).\n",
2036 STbp->buffer_bytes);
2037 } else if (cmdstatp->flags & SENSE_EOM) {
2038 if (STps->eof == ST_FM)
2039 STps->eof = ST_EOD_1;
2040 else
2041 STps->eof = ST_EOM_OK;
2042 if (STp->block_size == 0)
2043 STbp->buffer_bytes = bytes - transfer;
2044 else
2045 STbp->buffer_bytes =
2046 bytes - transfer * STp->block_size;
2047
2048 DEBC_printk(STp, "EOM detected (%d "
2049 "bytes read).\n",
2050 STbp->buffer_bytes);
2051 }
2052 }
2053 /* end of EOF, EOM, ILI test */
2054 else { /* nonzero sense key */
2055 DEBC_printk(STp, "Tape error while reading.\n");
2056 STps->drv_block = (-1);
2057 if (STps->eof == ST_FM &&
2058 cmdstatp->sense_hdr.sense_key == BLANK_CHECK) {
2059 DEBC_printk(STp, "Zero returned for "
2060 "first BLANK CHECK "
2061 "after EOF.\n");
2062 STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */
2063 } else /* Some other extended sense code */
2064 retval = (-EIO);
2065 }
2066
2067 if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */
2068 STbp->buffer_bytes = 0;
2069 }
2070 /* End of extended sense test */
2071 else { /* Non-extended sense */
2072 retval = STbp->syscall_result;
2073 }
2074
2075 }
2076 /* End of error handling */
2077 else { /* Read successful */
2078 STbp->buffer_bytes = bytes;
2079 if (STp->sili) /* In fixed block mode residual is always zero here */
2080 STbp->buffer_bytes -= STp->buffer->cmdstat.residual;
2081 }
2082
2083 if (STps->drv_block >= 0) {
2084 if (STp->block_size == 0)
2085 STps->drv_block++;
2086 else
2087 STps->drv_block += STbp->buffer_bytes / STp->block_size;
2088 }
2089 return retval;
2090}
2091
2092
2093/* Read command */
2094static ssize_t
2095st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
2096{
2097 ssize_t total;
2098 ssize_t retval = 0;
2099 ssize_t i, transfer;
2100 int special, do_dio = 0;
2101 struct st_request *SRpnt = NULL;
2102 struct scsi_tape *STp = filp->private_data;
2103 struct st_modedef *STm;
2104 struct st_partstat *STps;
2105 struct st_buffer *STbp = STp->buffer;
2106
2107 if (mutex_lock_interruptible(&STp->lock))
2108 return -ERESTARTSYS;
2109
2110 retval = rw_checks(STp, filp, count);
2111 if (retval || count == 0)
2112 goto out;
2113
2114 STm = &(STp->modes[STp->current_mode]);
2115 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
2116 if (!STm->do_read_ahead) {
2117 retval = (-EINVAL); /* Read must be integral number of blocks */
2118 goto out;
2119 }
2120 STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */
2121 }
2122
2123 STps = &(STp->ps[STp->partition]);
2124 if (STps->rw == ST_WRITING) {
2125 retval = flush_buffer(STp, 0);
2126 if (retval)
2127 goto out;
2128 STps->rw = ST_READING;
2129 }
2130 DEB(
2131 if (debugging && STps->eof != ST_NOEOF)
2132 st_printk(ST_DEB_MSG, STp,
2133 "EOF/EOM flag up (%d). Bytes %d\n",
2134 STps->eof, STbp->buffer_bytes);
2135 ) /* end DEB */
2136
2137 retval = setup_buffering(STp, buf, count, 1);
2138 if (retval)
2139 goto out;
2140 do_dio = STbp->do_dio;
2141
2142 if (STbp->buffer_bytes == 0 &&
2143 STps->eof >= ST_EOD_1) {
2144 if (STps->eof < ST_EOD) {
2145 STps->eof += 1;
2146 retval = 0;
2147 goto out;
2148 }
2149 retval = (-EIO); /* EOM or Blank Check */
2150 goto out;
2151 }
2152
2153 if (do_dio) {
2154 /* Check the buffer writability before any tape movement. Don't alter
2155 buffer data. */
2156 if (copy_from_user(&i, buf, 1) != 0 ||
2157 copy_to_user(buf, &i, 1) != 0 ||
2158 copy_from_user(&i, buf + count - 1, 1) != 0 ||
2159 copy_to_user(buf + count - 1, &i, 1) != 0) {
2160 retval = (-EFAULT);
2161 goto out;
2162 }
2163 }
2164
2165 STps->rw = ST_READING;
2166
2167
2168 /* Loop until enough data in buffer or a special condition found */
2169 for (total = 0, special = 0; total < count && !special;) {
2170
2171 /* Get new data if the buffer is empty */
2172 if (STbp->buffer_bytes == 0) {
2173 special = read_tape(STp, count - total, &SRpnt);
2174 if (special < 0) { /* No need to continue read */
2175 retval = special;
2176 goto out;
2177 }
2178 }
2179
2180 /* Move the data from driver buffer to user buffer */
2181 if (STbp->buffer_bytes > 0) {
2182 DEB(
2183 if (debugging && STps->eof != ST_NOEOF)
2184 st_printk(ST_DEB_MSG, STp,
2185 "EOF up (%d). Left %d, needed %d.\n",
2186 STps->eof, STbp->buffer_bytes,
2187 (int)(count - total));
2188 ) /* end DEB */
2189 transfer = STbp->buffer_bytes < count - total ?
2190 STbp->buffer_bytes : count - total;
2191 if (!do_dio) {
2192 i = from_buffer(STbp, buf, transfer);
2193 if (i) {
2194 retval = i;
2195 goto out;
2196 }
2197 }
2198 buf += transfer;
2199 total += transfer;
2200 }
2201
2202 if (STp->block_size == 0)
2203 break; /* Read only one variable length block */
2204
2205 } /* for (total = 0, special = 0;
2206 total < count && !special; ) */
2207
2208 /* Change the eof state if no data from tape or buffer */
2209 if (total == 0) {
2210 if (STps->eof == ST_FM_HIT) {
2211 STps->eof = ST_FM;
2212 STps->drv_block = 0;
2213 if (STps->drv_file >= 0)
2214 STps->drv_file++;
2215 } else if (STps->eof == ST_EOD_1) {
2216 STps->eof = ST_EOD_2;
2217 STps->drv_block = 0;
2218 if (STps->drv_file >= 0)
2219 STps->drv_file++;
2220 } else if (STps->eof == ST_EOD_2)
2221 STps->eof = ST_EOD;
2222 } else if (STps->eof == ST_FM)
2223 STps->eof = ST_NOEOF;
2224 retval = total;
2225
2226 out:
2227 if (SRpnt != NULL) {
2228 st_release_request(SRpnt);
2229 SRpnt = NULL;
2230 }
2231 if (do_dio) {
2232 release_buffering(STp, 1);
2233 STbp->buffer_bytes = 0;
2234 }
2235 mutex_unlock(&STp->lock);
2236
2237 return retval;
2238}
2239
2240
2241
2242DEB(
2243/* Set the driver options */
2244static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm)
2245{
2246 if (debugging) {
2247 st_printk(KERN_INFO, STp,
2248 "Mode %d options: buffer writes: %d, "
2249 "async writes: %d, read ahead: %d\n",
2250 STp->current_mode, STm->do_buffer_writes,
2251 STm->do_async_writes, STm->do_read_ahead);
2252 st_printk(KERN_INFO, STp,
2253 " can bsr: %d, two FMs: %d, "
2254 "fast mteom: %d, auto lock: %d,\n",
2255 STp->can_bsr, STp->two_fm, STp->fast_mteom,
2256 STp->do_auto_lock);
2257 st_printk(KERN_INFO, STp,
2258 " defs for wr: %d, no block limits: %d, "
2259 "partitions: %d, s2 log: %d\n",
2260 STm->defaults_for_writes, STp->omit_blklims,
2261 STp->can_partitions, STp->scsi2_logical);
2262 st_printk(KERN_INFO, STp,
2263 " sysv: %d nowait: %d sili: %d "
2264 "nowait_filemark: %d\n",
2265 STm->sysv, STp->immediate, STp->sili,
2266 STp->immediate_filemark);
2267 st_printk(KERN_INFO, STp, " debugging: %d\n", debugging);
2268 }
2269}
2270 )
2271
2272
2273static int st_set_options(struct scsi_tape *STp, long options)
2274{
2275 int value;
2276 long code;
2277 struct st_modedef *STm;
2278 struct cdev *cd0, *cd1;
2279 struct device *d0, *d1;
2280
2281 STm = &(STp->modes[STp->current_mode]);
2282 if (!STm->defined) {
2283 cd0 = STm->cdevs[0];
2284 cd1 = STm->cdevs[1];
2285 d0 = STm->devs[0];
2286 d1 = STm->devs[1];
2287 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef));
2288 STm->cdevs[0] = cd0;
2289 STm->cdevs[1] = cd1;
2290 STm->devs[0] = d0;
2291 STm->devs[1] = d1;
2292 modes_defined = 1;
2293 DEBC_printk(STp, "Initialized mode %d definition from mode 0\n",
2294 STp->current_mode);
2295 }
2296
2297 code = options & MT_ST_OPTIONS;
2298 if (code == MT_ST_BOOLEANS) {
2299 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
2300 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
2301 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
2302 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
2303 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
2304 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
2305 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
2306 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
2307 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
2308 if ((STp->device)->scsi_level >= SCSI_2)
2309 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
2310 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
2311 STp->immediate = (options & MT_ST_NOWAIT) != 0;
2312 STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0;
2313 STm->sysv = (options & MT_ST_SYSV) != 0;
2314 STp->sili = (options & MT_ST_SILI) != 0;
2315 DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
2316 st_log_options(STp, STm); )
2317 } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
2318 value = (code == MT_ST_SETBOOLEANS);
2319 if ((options & MT_ST_BUFFER_WRITES) != 0)
2320 STm->do_buffer_writes = value;
2321 if ((options & MT_ST_ASYNC_WRITES) != 0)
2322 STm->do_async_writes = value;
2323 if ((options & MT_ST_DEF_WRITES) != 0)
2324 STm->defaults_for_writes = value;
2325 if ((options & MT_ST_READ_AHEAD) != 0)
2326 STm->do_read_ahead = value;
2327 if ((options & MT_ST_TWO_FM) != 0)
2328 STp->two_fm = value;
2329 if ((options & MT_ST_FAST_MTEOM) != 0)
2330 STp->fast_mteom = value;
2331 if ((options & MT_ST_AUTO_LOCK) != 0)
2332 STp->do_auto_lock = value;
2333 if ((options & MT_ST_CAN_BSR) != 0)
2334 STp->can_bsr = value;
2335 if ((options & MT_ST_NO_BLKLIMS) != 0)
2336 STp->omit_blklims = value;
2337 if ((STp->device)->scsi_level >= SCSI_2 &&
2338 (options & MT_ST_CAN_PARTITIONS) != 0)
2339 STp->can_partitions = value;
2340 if ((options & MT_ST_SCSI2LOGICAL) != 0)
2341 STp->scsi2_logical = value;
2342 if ((options & MT_ST_NOWAIT) != 0)
2343 STp->immediate = value;
2344 if ((options & MT_ST_NOWAIT_EOF) != 0)
2345 STp->immediate_filemark = value;
2346 if ((options & MT_ST_SYSV) != 0)
2347 STm->sysv = value;
2348 if ((options & MT_ST_SILI) != 0)
2349 STp->sili = value;
2350 DEB(
2351 if ((options & MT_ST_DEBUGGING) != 0)
2352 debugging = value;
2353 st_log_options(STp, STm); )
2354 } else if (code == MT_ST_WRITE_THRESHOLD) {
2355 /* Retained for compatibility */
2356 } else if (code == MT_ST_DEF_BLKSIZE) {
2357 value = (options & ~MT_ST_OPTIONS);
2358 if (value == ~MT_ST_OPTIONS) {
2359 STm->default_blksize = (-1);
2360 DEBC_printk(STp, "Default block size disabled.\n");
2361 } else {
2362 STm->default_blksize = value;
2363 DEBC_printk(STp,"Default block size set to "
2364 "%d bytes.\n", STm->default_blksize);
2365 if (STp->ready == ST_READY) {
2366 STp->blksize_changed = 0;
2367 set_mode_densblk(STp, STm);
2368 }
2369 }
2370 } else if (code == MT_ST_TIMEOUTS) {
2371 value = (options & ~MT_ST_OPTIONS);
2372 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
2373 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
2374 DEBC_printk(STp, "Long timeout set to %d seconds.\n",
2375 (value & ~MT_ST_SET_LONG_TIMEOUT));
2376 } else {
2377 blk_queue_rq_timeout(STp->device->request_queue,
2378 value * HZ);
2379 DEBC_printk(STp, "Normal timeout set to %d seconds.\n",
2380 value);
2381 }
2382 } else if (code == MT_ST_SET_CLN) {
2383 value = (options & ~MT_ST_OPTIONS) & 0xff;
2384 if (value != 0 &&
2385 (value < EXTENDED_SENSE_START ||
2386 value >= SCSI_SENSE_BUFFERSIZE))
2387 return (-EINVAL);
2388 STp->cln_mode = value;
2389 STp->cln_sense_mask = (options >> 8) & 0xff;
2390 STp->cln_sense_value = (options >> 16) & 0xff;
2391 st_printk(KERN_INFO, STp,
2392 "Cleaning request mode %d, mask %02x, value %02x\n",
2393 value, STp->cln_sense_mask, STp->cln_sense_value);
2394 } else if (code == MT_ST_DEF_OPTIONS) {
2395 code = (options & ~MT_ST_CLEAR_DEFAULT);
2396 value = (options & MT_ST_CLEAR_DEFAULT);
2397 if (code == MT_ST_DEF_DENSITY) {
2398 if (value == MT_ST_CLEAR_DEFAULT) {
2399 STm->default_density = (-1);
2400 DEBC_printk(STp,
2401 "Density default disabled.\n");
2402 } else {
2403 STm->default_density = value & 0xff;
2404 DEBC_printk(STp, "Density default set to %x\n",
2405 STm->default_density);
2406 if (STp->ready == ST_READY) {
2407 STp->density_changed = 0;
2408 set_mode_densblk(STp, STm);
2409 }
2410 }
2411 } else if (code == MT_ST_DEF_DRVBUFFER) {
2412 if (value == MT_ST_CLEAR_DEFAULT) {
2413 STp->default_drvbuffer = 0xff;
2414 DEBC_printk(STp,
2415 "Drive buffer default disabled.\n");
2416 } else {
2417 STp->default_drvbuffer = value & 7;
2418 DEBC_printk(STp,
2419 "Drive buffer default set to %x\n",
2420 STp->default_drvbuffer);
2421 if (STp->ready == ST_READY)
2422 st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer);
2423 }
2424 } else if (code == MT_ST_DEF_COMPRESSION) {
2425 if (value == MT_ST_CLEAR_DEFAULT) {
2426 STm->default_compression = ST_DONT_TOUCH;
2427 DEBC_printk(STp,
2428 "Compression default disabled.\n");
2429 } else {
2430 if ((value & 0xff00) != 0) {
2431 STp->c_algo = (value & 0xff00) >> 8;
2432 DEBC_printk(STp, "Compression "
2433 "algorithm set to 0x%x.\n",
2434 STp->c_algo);
2435 }
2436 if ((value & 0xff) != 0xff) {
2437 STm->default_compression = (value & 1 ? ST_YES : ST_NO);
2438 DEBC_printk(STp, "Compression default "
2439 "set to %x\n",
2440 (value & 1));
2441 if (STp->ready == ST_READY) {
2442 STp->compression_changed = 0;
2443 st_compression(STp, (STm->default_compression == ST_YES));
2444 }
2445 }
2446 }
2447 }
2448 } else
2449 return (-EIO);
2450
2451 return 0;
2452}
2453
2454#define MODE_HEADER_LENGTH 4
2455
2456/* Mode header and page byte offsets */
2457#define MH_OFF_DATA_LENGTH 0
2458#define MH_OFF_MEDIUM_TYPE 1
2459#define MH_OFF_DEV_SPECIFIC 2
2460#define MH_OFF_BDESCS_LENGTH 3
2461#define MP_OFF_PAGE_NBR 0
2462#define MP_OFF_PAGE_LENGTH 1
2463
2464/* Mode header and page bit masks */
2465#define MH_BIT_WP 0x80
2466#define MP_MSK_PAGE_NBR 0x3f
2467
2468/* Don't return block descriptors */
2469#define MODE_SENSE_OMIT_BDESCS 0x08
2470
2471#define MODE_SELECT_PAGE_FORMAT 0x10
2472
2473/* Read a mode page into the tape buffer. The block descriptors are included
2474 if incl_block_descs is true. The page control is ored to the page number
2475 parameter, if necessary. */
2476static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs)
2477{
2478 unsigned char cmd[MAX_COMMAND_SIZE];
2479 struct st_request *SRpnt;
2480
2481 memset(cmd, 0, MAX_COMMAND_SIZE);
2482 cmd[0] = MODE_SENSE;
2483 if (omit_block_descs)
2484 cmd[1] = MODE_SENSE_OMIT_BDESCS;
2485 cmd[2] = page;
2486 cmd[4] = 255;
2487
2488 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE,
2489 STp->device->request_queue->rq_timeout, 0, 1);
2490 if (SRpnt == NULL)
2491 return (STp->buffer)->syscall_result;
2492
2493 st_release_request(SRpnt);
2494
2495 return STp->buffer->syscall_result;
2496}
2497
2498
2499/* Send the mode page in the tape buffer to the drive. Assumes that the mode data
2500 in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */
2501static int write_mode_page(struct scsi_tape *STp, int page, int slow)
2502{
2503 int pgo;
2504 unsigned char cmd[MAX_COMMAND_SIZE];
2505 struct st_request *SRpnt;
2506 int timeout;
2507
2508 memset(cmd, 0, MAX_COMMAND_SIZE);
2509 cmd[0] = MODE_SELECT;
2510 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2511 pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH];
2512 cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2;
2513
2514 /* Clear reserved fields */
2515 (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0;
2516 (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0;
2517 (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP;
2518 (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR;
2519
2520 timeout = slow ?
2521 STp->long_timeout : STp->device->request_queue->rq_timeout;
2522 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE,
2523 timeout, 0, 1);
2524 if (SRpnt == NULL)
2525 return (STp->buffer)->syscall_result;
2526
2527 st_release_request(SRpnt);
2528
2529 return STp->buffer->syscall_result;
2530}
2531
2532
2533#define COMPRESSION_PAGE 0x0f
2534#define COMPRESSION_PAGE_LENGTH 16
2535
2536#define CP_OFF_DCE_DCC 2
2537#define CP_OFF_C_ALGO 7
2538
2539#define DCE_MASK 0x80
2540#define DCC_MASK 0x40
2541#define RED_MASK 0x60
2542
2543
2544/* Control the compression with mode page 15. Algorithm not changed if zero.
2545
2546 The block descriptors are read and written because Sony SDT-7000 does not
2547 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
2548 Including block descriptors should not cause any harm to other drives. */
2549
2550static int st_compression(struct scsi_tape * STp, int state)
2551{
2552 int retval;
2553 int mpoffs; /* Offset to mode page start */
2554 unsigned char *b_data = (STp->buffer)->b_data;
2555
2556 if (STp->ready != ST_READY)
2557 return (-EIO);
2558
2559 /* Read the current page contents */
2560 retval = read_mode_page(STp, COMPRESSION_PAGE, 0);
2561 if (retval) {
2562 DEBC_printk(STp, "Compression mode page not supported.\n");
2563 return (-EIO);
2564 }
2565
2566 mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH];
2567 DEBC_printk(STp, "Compression state is %d.\n",
2568 (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0));
2569
2570 /* Check if compression can be changed */
2571 if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) {
2572 DEBC_printk(STp, "Compression not supported.\n");
2573 return (-EIO);
2574 }
2575
2576 /* Do the change */
2577 if (state) {
2578 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK;
2579 if (STp->c_algo != 0)
2580 b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo;
2581 }
2582 else {
2583 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK;
2584 if (STp->c_algo != 0)
2585 b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */
2586 }
2587
2588 retval = write_mode_page(STp, COMPRESSION_PAGE, 0);
2589 if (retval) {
2590 DEBC_printk(STp, "Compression change failed.\n");
2591 return (-EIO);
2592 }
2593 DEBC_printk(STp, "Compression state changed to %d.\n", state);
2594
2595 STp->compression_changed = 1;
2596 return 0;
2597}
2598
2599
2600/* Process the load and unload commands (does unload if the load code is zero) */
2601static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code)
2602{
2603 int retval = (-EIO), timeout;
2604 unsigned char cmd[MAX_COMMAND_SIZE];
2605 struct st_partstat *STps;
2606 struct st_request *SRpnt;
2607
2608 if (STp->ready != ST_READY && !load_code) {
2609 if (STp->ready == ST_NO_TAPE)
2610 return (-ENOMEDIUM);
2611 else
2612 return (-EIO);
2613 }
2614
2615 memset(cmd, 0, MAX_COMMAND_SIZE);
2616 cmd[0] = START_STOP;
2617 if (load_code)
2618 cmd[4] |= 1;
2619 /*
2620 * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A
2621 */
2622 if (load_code >= 1 + MT_ST_HPLOADER_OFFSET
2623 && load_code <= 6 + MT_ST_HPLOADER_OFFSET) {
2624 DEBC_printk(STp, " Enhanced %sload slot %2d.\n",
2625 (cmd[4]) ? "" : "un",
2626 load_code - MT_ST_HPLOADER_OFFSET);
2627 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */
2628 }
2629 if (STp->immediate) {
2630 cmd[1] = 1; /* Don't wait for completion */
2631 timeout = STp->device->request_queue->rq_timeout;
2632 }
2633 else
2634 timeout = STp->long_timeout;
2635
2636 DEBC(
2637 if (!load_code)
2638 st_printk(ST_DEB_MSG, STp, "Unloading tape.\n");
2639 else
2640 st_printk(ST_DEB_MSG, STp, "Loading tape.\n");
2641 );
2642
2643 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
2644 timeout, MAX_RETRIES, 1);
2645 if (!SRpnt)
2646 return (STp->buffer)->syscall_result;
2647
2648 retval = (STp->buffer)->syscall_result;
2649 st_release_request(SRpnt);
2650
2651 if (!retval) { /* SCSI command successful */
2652
2653 if (!load_code) {
2654 STp->rew_at_close = 0;
2655 STp->ready = ST_NO_TAPE;
2656 }
2657 else {
2658 STp->rew_at_close = STp->autorew_dev;
2659 retval = check_tape(STp, filp);
2660 if (retval > 0)
2661 retval = 0;
2662 }
2663 }
2664 else {
2665 STps = &(STp->ps[STp->partition]);
2666 STps->drv_file = STps->drv_block = (-1);
2667 }
2668
2669 return retval;
2670}
2671
2672#if DEBUG
2673#define ST_DEB_FORWARD 0
2674#define ST_DEB_BACKWARD 1
2675static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd)
2676{
2677 s32 sc;
2678
2679 if (!debugging)
2680 return;
2681
2682 sc = sign_extend32(get_unaligned_be24(&cmd[2]), 23);
2683 if (direction)
2684 sc = -sc;
2685 st_printk(ST_DEB_MSG, STp, "Spacing tape %s over %d %s.\n",
2686 direction ? "backward" : "forward", sc, units);
2687}
2688#else
2689#define ST_DEB_FORWARD 0
2690#define ST_DEB_BACKWARD 1
2691static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd) {}
2692#endif
2693
2694
2695/* Internal ioctl function */
2696static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg)
2697{
2698 int timeout;
2699 long ltmp;
2700 int ioctl_result;
2701 int chg_eof = 1;
2702 unsigned char cmd[MAX_COMMAND_SIZE];
2703 struct st_request *SRpnt;
2704 struct st_partstat *STps;
2705 int fileno, blkno, at_sm, undone;
2706 int datalen = 0, direction = DMA_NONE;
2707
2708 WARN_ON(STp->buffer->do_dio != 0);
2709 if (STp->ready != ST_READY) {
2710 if (STp->ready == ST_NO_TAPE)
2711 return (-ENOMEDIUM);
2712 else
2713 return (-EIO);
2714 }
2715 timeout = STp->long_timeout;
2716 STps = &(STp->ps[STp->partition]);
2717 fileno = STps->drv_file;
2718 blkno = STps->drv_block;
2719 at_sm = STps->at_sm;
2720
2721 memset(cmd, 0, MAX_COMMAND_SIZE);
2722 switch (cmd_in) {
2723 case MTFSFM:
2724 chg_eof = 0; /* Changed from the FSF after this */
2725 fallthrough;
2726 case MTFSF:
2727 cmd[0] = SPACE;
2728 cmd[1] = 0x01; /* Space FileMarks */
2729 cmd[2] = (arg >> 16);
2730 cmd[3] = (arg >> 8);
2731 cmd[4] = arg;
2732 deb_space_print(STp, ST_DEB_FORWARD, "filemarks", cmd);
2733 if (fileno >= 0)
2734 fileno += arg;
2735 blkno = 0;
2736 at_sm &= (arg == 0);
2737 break;
2738 case MTBSFM:
2739 chg_eof = 0; /* Changed from the FSF after this */
2740 fallthrough;
2741 case MTBSF:
2742 cmd[0] = SPACE;
2743 cmd[1] = 0x01; /* Space FileMarks */
2744 ltmp = (-arg);
2745 cmd[2] = (ltmp >> 16);
2746 cmd[3] = (ltmp >> 8);
2747 cmd[4] = ltmp;
2748 deb_space_print(STp, ST_DEB_BACKWARD, "filemarks", cmd);
2749 if (fileno >= 0)
2750 fileno -= arg;
2751 blkno = (-1); /* We can't know the block number */
2752 at_sm &= (arg == 0);
2753 break;
2754 case MTFSR:
2755 cmd[0] = SPACE;
2756 cmd[1] = 0x00; /* Space Blocks */
2757 cmd[2] = (arg >> 16);
2758 cmd[3] = (arg >> 8);
2759 cmd[4] = arg;
2760 deb_space_print(STp, ST_DEB_FORWARD, "blocks", cmd);
2761 if (blkno >= 0)
2762 blkno += arg;
2763 at_sm &= (arg == 0);
2764 break;
2765 case MTBSR:
2766 cmd[0] = SPACE;
2767 cmd[1] = 0x00; /* Space Blocks */
2768 ltmp = (-arg);
2769 cmd[2] = (ltmp >> 16);
2770 cmd[3] = (ltmp >> 8);
2771 cmd[4] = ltmp;
2772 deb_space_print(STp, ST_DEB_BACKWARD, "blocks", cmd);
2773 if (blkno >= 0)
2774 blkno -= arg;
2775 at_sm &= (arg == 0);
2776 break;
2777 case MTFSS:
2778 cmd[0] = SPACE;
2779 cmd[1] = 0x04; /* Space Setmarks */
2780 cmd[2] = (arg >> 16);
2781 cmd[3] = (arg >> 8);
2782 cmd[4] = arg;
2783 deb_space_print(STp, ST_DEB_FORWARD, "setmarks", cmd);
2784 if (arg != 0) {
2785 blkno = fileno = (-1);
2786 at_sm = 1;
2787 }
2788 break;
2789 case MTBSS:
2790 cmd[0] = SPACE;
2791 cmd[1] = 0x04; /* Space Setmarks */
2792 ltmp = (-arg);
2793 cmd[2] = (ltmp >> 16);
2794 cmd[3] = (ltmp >> 8);
2795 cmd[4] = ltmp;
2796 deb_space_print(STp, ST_DEB_BACKWARD, "setmarks", cmd);
2797 if (arg != 0) {
2798 blkno = fileno = (-1);
2799 at_sm = 1;
2800 }
2801 break;
2802 case MTWEOF:
2803 case MTWEOFI:
2804 case MTWSM:
2805 if (STp->write_prot)
2806 return (-EACCES);
2807 cmd[0] = WRITE_FILEMARKS;
2808 if (cmd_in == MTWSM)
2809 cmd[1] = 2;
2810 if (cmd_in == MTWEOFI ||
2811 (cmd_in == MTWEOF && STp->immediate_filemark))
2812 cmd[1] |= 1;
2813 cmd[2] = (arg >> 16);
2814 cmd[3] = (arg >> 8);
2815 cmd[4] = arg;
2816 timeout = STp->device->request_queue->rq_timeout;
2817 DEBC(
2818 if (cmd_in != MTWSM)
2819 st_printk(ST_DEB_MSG, STp,
2820 "Writing %d filemarks.\n",
2821 cmd[2] * 65536 +
2822 cmd[3] * 256 +
2823 cmd[4]);
2824 else
2825 st_printk(ST_DEB_MSG, STp,
2826 "Writing %d setmarks.\n",
2827 cmd[2] * 65536 +
2828 cmd[3] * 256 +
2829 cmd[4]);
2830 )
2831 if (fileno >= 0)
2832 fileno += arg;
2833 blkno = 0;
2834 at_sm = (cmd_in == MTWSM);
2835 break;
2836 case MTREW:
2837 cmd[0] = REZERO_UNIT;
2838 if (STp->immediate) {
2839 cmd[1] = 1; /* Don't wait for completion */
2840 timeout = STp->device->request_queue->rq_timeout;
2841 }
2842 DEBC_printk(STp, "Rewinding tape.\n");
2843 fileno = blkno = at_sm = 0;
2844 break;
2845 case MTNOP:
2846 DEBC_printk(STp, "No op on tape.\n");
2847 return 0; /* Should do something ? */
2848 case MTRETEN:
2849 cmd[0] = START_STOP;
2850 if (STp->immediate) {
2851 cmd[1] = 1; /* Don't wait for completion */
2852 timeout = STp->device->request_queue->rq_timeout;
2853 }
2854 cmd[4] = 3;
2855 DEBC_printk(STp, "Retensioning tape.\n");
2856 fileno = blkno = at_sm = 0;
2857 break;
2858 case MTEOM:
2859 if (!STp->fast_mteom) {
2860 /* space to the end of tape */
2861 ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff);
2862 fileno = STps->drv_file;
2863 if (STps->eof >= ST_EOD_1)
2864 return 0;
2865 /* The next lines would hide the number of spaced FileMarks
2866 That's why I inserted the previous lines. I had no luck
2867 with detecting EOM with FSF, so we go now to EOM.
2868 Joerg Weule */
2869 } else
2870 fileno = (-1);
2871 cmd[0] = SPACE;
2872 cmd[1] = 3;
2873 DEBC_printk(STp, "Spacing to end of recorded medium.\n");
2874 blkno = -1;
2875 at_sm = 0;
2876 break;
2877 case MTERASE:
2878 if (STp->write_prot)
2879 return (-EACCES);
2880 cmd[0] = ERASE;
2881 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */
2882 if (STp->immediate) {
2883 cmd[1] |= 2; /* Don't wait for completion */
2884 timeout = STp->device->request_queue->rq_timeout;
2885 }
2886 else
2887 timeout = STp->long_timeout * 8;
2888
2889 DEBC_printk(STp, "Erasing tape.\n");
2890 fileno = blkno = at_sm = 0;
2891 break;
2892 case MTSETBLK: /* Set block length */
2893 case MTSETDENSITY: /* Set tape density */
2894 case MTSETDRVBUFFER: /* Set drive buffering */
2895 case SET_DENS_AND_BLK: /* Set density and block size */
2896 chg_eof = 0;
2897 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
2898 return (-EIO); /* Not allowed if data in buffer */
2899 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
2900 (arg & MT_ST_BLKSIZE_MASK) != 0 &&
2901 STp->max_block > 0 &&
2902 ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block ||
2903 (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) {
2904 st_printk(KERN_WARNING, STp, "Illegal block size.\n");
2905 return (-EINVAL);
2906 }
2907 cmd[0] = MODE_SELECT;
2908 if ((STp->use_pf & USE_PF))
2909 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2910 cmd[4] = datalen = 12;
2911 direction = DMA_TO_DEVICE;
2912
2913 memset((STp->buffer)->b_data, 0, 12);
2914 if (cmd_in == MTSETDRVBUFFER)
2915 (STp->buffer)->b_data[2] = (arg & 7) << 4;
2916 else
2917 (STp->buffer)->b_data[2] =
2918 STp->drv_buffer << 4;
2919 (STp->buffer)->b_data[3] = 8; /* block descriptor length */
2920 if (cmd_in == MTSETDENSITY) {
2921 (STp->buffer)->b_data[4] = arg;
2922 STp->density_changed = 1; /* At least we tried ;-) */
2923 } else if (cmd_in == SET_DENS_AND_BLK)
2924 (STp->buffer)->b_data[4] = arg >> 24;
2925 else
2926 (STp->buffer)->b_data[4] = STp->density;
2927 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2928 ltmp = arg & MT_ST_BLKSIZE_MASK;
2929 if (cmd_in == MTSETBLK)
2930 STp->blksize_changed = 1; /* At least we tried ;-) */
2931 } else
2932 ltmp = STp->block_size;
2933 (STp->buffer)->b_data[9] = (ltmp >> 16);
2934 (STp->buffer)->b_data[10] = (ltmp >> 8);
2935 (STp->buffer)->b_data[11] = ltmp;
2936 timeout = STp->device->request_queue->rq_timeout;
2937 DEBC(
2938 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK)
2939 st_printk(ST_DEB_MSG, STp,
2940 "Setting block size to %d bytes.\n",
2941 (STp->buffer)->b_data[9] * 65536 +
2942 (STp->buffer)->b_data[10] * 256 +
2943 (STp->buffer)->b_data[11]);
2944 if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK)
2945 st_printk(ST_DEB_MSG, STp,
2946 "Setting density code to %x.\n",
2947 (STp->buffer)->b_data[4]);
2948 if (cmd_in == MTSETDRVBUFFER)
2949 st_printk(ST_DEB_MSG, STp,
2950 "Setting drive buffer code to %d.\n",
2951 ((STp->buffer)->b_data[2] >> 4) & 7);
2952 )
2953 break;
2954 default:
2955 return (-ENOSYS);
2956 }
2957
2958 SRpnt = st_do_scsi(NULL, STp, cmd, datalen, direction,
2959 timeout, MAX_RETRIES, 1);
2960 if (!SRpnt)
2961 return (STp->buffer)->syscall_result;
2962
2963 ioctl_result = (STp->buffer)->syscall_result;
2964
2965 if (!ioctl_result) { /* SCSI command successful */
2966 st_release_request(SRpnt);
2967 SRpnt = NULL;
2968 STps->drv_block = blkno;
2969 STps->drv_file = fileno;
2970 STps->at_sm = at_sm;
2971
2972 if (cmd_in == MTBSFM)
2973 ioctl_result = st_int_ioctl(STp, MTFSF, 1);
2974 else if (cmd_in == MTFSFM)
2975 ioctl_result = st_int_ioctl(STp, MTBSF, 1);
2976
2977 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2978 STp->block_size = arg & MT_ST_BLKSIZE_MASK;
2979 if (STp->block_size != 0) {
2980 (STp->buffer)->buffer_blocks =
2981 (STp->buffer)->buffer_size / STp->block_size;
2982 }
2983 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
2984 if (cmd_in == SET_DENS_AND_BLK)
2985 STp->density = arg >> MT_ST_DENSITY_SHIFT;
2986 } else if (cmd_in == MTSETDRVBUFFER)
2987 STp->drv_buffer = (arg & 7);
2988 else if (cmd_in == MTSETDENSITY)
2989 STp->density = arg;
2990
2991 if (cmd_in == MTEOM)
2992 STps->eof = ST_EOD;
2993 else if (cmd_in == MTFSF)
2994 STps->eof = ST_FM;
2995 else if (chg_eof)
2996 STps->eof = ST_NOEOF;
2997
2998 if (cmd_in == MTWEOF || cmd_in == MTWEOFI)
2999 STps->rw = ST_IDLE; /* prevent automatic WEOF at close */
3000 } else { /* SCSI command was not completely successful. Don't return
3001 from this block without releasing the SCSI command block! */
3002 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
3003
3004 if (cmdstatp->flags & SENSE_EOM) {
3005 if (cmd_in != MTBSF && cmd_in != MTBSFM &&
3006 cmd_in != MTBSR && cmd_in != MTBSS)
3007 STps->eof = ST_EOM_OK;
3008 STps->drv_block = 0;
3009 }
3010
3011 if (cmdstatp->remainder_valid)
3012 undone = (int)cmdstatp->uremainder64;
3013 else
3014 undone = 0;
3015
3016 if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) &&
3017 cmdstatp->have_sense &&
3018 (cmdstatp->flags & SENSE_EOM)) {
3019 if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
3020 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) {
3021 ioctl_result = 0; /* EOF(s) written successfully at EOM */
3022 STps->eof = ST_NOEOF;
3023 } else { /* Writing EOF(s) failed */
3024 if (fileno >= 0)
3025 fileno -= undone;
3026 if (undone < arg)
3027 STps->eof = ST_NOEOF;
3028 }
3029 STps->drv_file = fileno;
3030 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) {
3031 if (fileno >= 0)
3032 STps->drv_file = fileno - undone;
3033 else
3034 STps->drv_file = fileno;
3035 STps->drv_block = -1;
3036 STps->eof = ST_NOEOF;
3037 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) {
3038 if (arg > 0 && undone < 0) /* Some drives get this wrong */
3039 undone = (-undone);
3040 if (STps->drv_file >= 0)
3041 STps->drv_file = fileno + undone;
3042 STps->drv_block = 0;
3043 STps->eof = ST_NOEOF;
3044 } else if (cmd_in == MTFSR) {
3045 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
3046 if (STps->drv_file >= 0)
3047 STps->drv_file++;
3048 STps->drv_block = 0;
3049 STps->eof = ST_FM;
3050 } else {
3051 if (blkno >= undone)
3052 STps->drv_block = blkno - undone;
3053 else
3054 STps->drv_block = (-1);
3055 STps->eof = ST_NOEOF;
3056 }
3057 } else if (cmd_in == MTBSR) {
3058 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
3059 STps->drv_file--;
3060 STps->drv_block = (-1);
3061 } else {
3062 if (arg > 0 && undone < 0) /* Some drives get this wrong */
3063 undone = (-undone);
3064 if (STps->drv_block >= 0)
3065 STps->drv_block = blkno + undone;
3066 }
3067 STps->eof = ST_NOEOF;
3068 } else if (cmd_in == MTEOM) {
3069 STps->drv_file = (-1);
3070 STps->drv_block = (-1);
3071 STps->eof = ST_EOD;
3072 } else if (cmd_in == MTSETBLK ||
3073 cmd_in == MTSETDENSITY ||
3074 cmd_in == MTSETDRVBUFFER ||
3075 cmd_in == SET_DENS_AND_BLK) {
3076 if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
3077 !(STp->use_pf & PF_TESTED)) {
3078 /* Try the other possible state of Page Format if not
3079 already tried */
3080 STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
3081 st_release_request(SRpnt);
3082 SRpnt = NULL;
3083 return st_int_ioctl(STp, cmd_in, arg);
3084 }
3085 } else if (chg_eof)
3086 STps->eof = ST_NOEOF;
3087
3088 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
3089 STps->eof = ST_EOD;
3090
3091 st_release_request(SRpnt);
3092 SRpnt = NULL;
3093 }
3094
3095 return ioctl_result;
3096}
3097
3098
3099/* Get the tape position. If bt == 2, arg points into a kernel space mt_loc
3100 structure. */
3101
3102static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition,
3103 int logical)
3104{
3105 int result;
3106 unsigned char scmd[MAX_COMMAND_SIZE];
3107 struct st_request *SRpnt;
3108
3109 if (STp->ready != ST_READY)
3110 return (-EIO);
3111
3112 memset(scmd, 0, MAX_COMMAND_SIZE);
3113 if ((STp->device)->scsi_level < SCSI_2) {
3114 scmd[0] = QFA_REQUEST_BLOCK;
3115 scmd[4] = 3;
3116 } else {
3117 scmd[0] = READ_POSITION;
3118 if (!logical && !STp->scsi2_logical)
3119 scmd[1] = 1;
3120 }
3121 SRpnt = st_do_scsi(NULL, STp, scmd, 20, DMA_FROM_DEVICE,
3122 STp->device->request_queue->rq_timeout,
3123 MAX_READY_RETRIES, 1);
3124 if (!SRpnt)
3125 return (STp->buffer)->syscall_result;
3126
3127 if ((STp->buffer)->syscall_result != 0 ||
3128 (STp->device->scsi_level >= SCSI_2 &&
3129 ((STp->buffer)->b_data[0] & 4) != 0)) {
3130 *block = *partition = 0;
3131 DEBC_printk(STp, " Can't read tape position.\n");
3132 result = (-EIO);
3133 } else {
3134 result = 0;
3135 if ((STp->device)->scsi_level < SCSI_2) {
3136 *block = ((STp->buffer)->b_data[0] << 16)
3137 + ((STp->buffer)->b_data[1] << 8)
3138 + (STp->buffer)->b_data[2];
3139 *partition = 0;
3140 } else {
3141 *block = ((STp->buffer)->b_data[4] << 24)
3142 + ((STp->buffer)->b_data[5] << 16)
3143 + ((STp->buffer)->b_data[6] << 8)
3144 + (STp->buffer)->b_data[7];
3145 *partition = (STp->buffer)->b_data[1];
3146 if (((STp->buffer)->b_data[0] & 0x80) &&
3147 (STp->buffer)->b_data[1] == 0) /* BOP of partition 0 */
3148 STp->ps[0].drv_block = STp->ps[0].drv_file = 0;
3149 }
3150 DEBC_printk(STp, "Got tape pos. blk %d part %d.\n",
3151 *block, *partition);
3152 }
3153 st_release_request(SRpnt);
3154 SRpnt = NULL;
3155
3156 return result;
3157}
3158
3159
3160/* Set the tape block and partition. Negative partition means that only the
3161 block should be set in vendor specific way. */
3162static int set_location(struct scsi_tape *STp, unsigned int block, int partition,
3163 int logical)
3164{
3165 struct st_partstat *STps;
3166 int result, p;
3167 unsigned int blk;
3168 int timeout;
3169 unsigned char scmd[MAX_COMMAND_SIZE];
3170 struct st_request *SRpnt;
3171
3172 if (STp->ready != ST_READY)
3173 return (-EIO);
3174 timeout = STp->long_timeout;
3175 STps = &(STp->ps[STp->partition]);
3176
3177 DEBC_printk(STp, "Setting block to %d and partition to %d.\n",
3178 block, partition);
3179 DEB(if (partition < 0)
3180 return (-EIO); )
3181
3182 /* Update the location at the partition we are leaving */
3183 if ((!STp->can_partitions && partition != 0) ||
3184 partition >= ST_NBR_PARTITIONS)
3185 return (-EINVAL);
3186 if (partition != STp->partition) {
3187 if (get_location(STp, &blk, &p, 1))
3188 STps->last_block_valid = 0;
3189 else {
3190 STps->last_block_valid = 1;
3191 STps->last_block_visited = blk;
3192 DEBC_printk(STp, "Visited block %d for "
3193 "partition %d saved.\n",
3194 blk, STp->partition);
3195 }
3196 }
3197
3198 memset(scmd, 0, MAX_COMMAND_SIZE);
3199 if ((STp->device)->scsi_level < SCSI_2) {
3200 scmd[0] = QFA_SEEK_BLOCK;
3201 scmd[2] = (block >> 16);
3202 scmd[3] = (block >> 8);
3203 scmd[4] = block;
3204 scmd[5] = 0;
3205 } else {
3206 scmd[0] = SEEK_10;
3207 scmd[3] = (block >> 24);
3208 scmd[4] = (block >> 16);
3209 scmd[5] = (block >> 8);
3210 scmd[6] = block;
3211 if (!logical && !STp->scsi2_logical)
3212 scmd[1] = 4;
3213 if (STp->partition != partition) {
3214 scmd[1] |= 2;
3215 scmd[8] = partition;
3216 DEBC_printk(STp, "Trying to change partition "
3217 "from %d to %d\n", STp->partition,
3218 partition);
3219 }
3220 }
3221 if (STp->immediate) {
3222 scmd[1] |= 1; /* Don't wait for completion */
3223 timeout = STp->device->request_queue->rq_timeout;
3224 }
3225
3226 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3227 timeout, MAX_READY_RETRIES, 1);
3228 if (!SRpnt)
3229 return (STp->buffer)->syscall_result;
3230
3231 STps->drv_block = STps->drv_file = (-1);
3232 STps->eof = ST_NOEOF;
3233 if ((STp->buffer)->syscall_result != 0) {
3234 result = (-EIO);
3235 if (STp->can_partitions &&
3236 (STp->device)->scsi_level >= SCSI_2 &&
3237 (p = find_partition(STp)) >= 0)
3238 STp->partition = p;
3239 } else {
3240 if (STp->can_partitions) {
3241 STp->partition = partition;
3242 STps = &(STp->ps[partition]);
3243 if (!STps->last_block_valid ||
3244 STps->last_block_visited != block) {
3245 STps->at_sm = 0;
3246 STps->rw = ST_IDLE;
3247 }
3248 } else
3249 STps->at_sm = 0;
3250 if (block == 0)
3251 STps->drv_block = STps->drv_file = 0;
3252 result = 0;
3253 }
3254
3255 st_release_request(SRpnt);
3256 SRpnt = NULL;
3257
3258 return result;
3259}
3260
3261
3262/* Find the current partition number for the drive status. Called from open and
3263 returns either partition number of negative error code. */
3264static int find_partition(struct scsi_tape *STp)
3265{
3266 int i, partition;
3267 unsigned int block;
3268
3269 if ((i = get_location(STp, &block, &partition, 1)) < 0)
3270 return i;
3271 if (partition >= ST_NBR_PARTITIONS)
3272 return (-EIO);
3273 return partition;
3274}
3275
3276
3277/* Change the partition if necessary */
3278static int switch_partition(struct scsi_tape *STp)
3279{
3280 struct st_partstat *STps;
3281
3282 if (STp->partition == STp->new_partition)
3283 return 0;
3284 STps = &(STp->ps[STp->new_partition]);
3285 if (!STps->last_block_valid)
3286 STps->last_block_visited = 0;
3287 return set_location(STp, STps->last_block_visited, STp->new_partition, 1);
3288}
3289
3290/* Functions for reading and writing the medium partition mode page. */
3291
3292#define PART_PAGE 0x11
3293#define PART_PAGE_FIXED_LENGTH 8
3294
3295#define PP_OFF_MAX_ADD_PARTS 2
3296#define PP_OFF_NBR_ADD_PARTS 3
3297#define PP_OFF_FLAGS 4
3298#define PP_OFF_PART_UNITS 6
3299#define PP_OFF_RESERVED 7
3300
3301#define PP_BIT_IDP 0x20
3302#define PP_BIT_FDP 0x80
3303#define PP_MSK_PSUM_MB 0x10
3304#define PP_MSK_PSUM_UNITS 0x18
3305#define PP_MSK_POFM 0x04
3306
3307/* Get the number of partitions on the tape. As a side effect reads the
3308 mode page into the tape buffer. */
3309static int nbr_partitions(struct scsi_tape *STp)
3310{
3311 int result;
3312
3313 if (STp->ready != ST_READY)
3314 return (-EIO);
3315
3316 result = read_mode_page(STp, PART_PAGE, 1);
3317
3318 if (result) {
3319 DEBC_printk(STp, "Can't read medium partition page.\n");
3320 result = (-EIO);
3321 } else {
3322 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH +
3323 PP_OFF_NBR_ADD_PARTS] + 1;
3324 DEBC_printk(STp, "Number of partitions %d.\n", result);
3325 }
3326
3327 return result;
3328}
3329
3330
3331static int format_medium(struct scsi_tape *STp, int format)
3332{
3333 int result = 0;
3334 int timeout = STp->long_timeout;
3335 unsigned char scmd[MAX_COMMAND_SIZE];
3336 struct st_request *SRpnt;
3337
3338 memset(scmd, 0, MAX_COMMAND_SIZE);
3339 scmd[0] = FORMAT_UNIT;
3340 scmd[2] = format;
3341 if (STp->immediate) {
3342 scmd[1] |= 1; /* Don't wait for completion */
3343 timeout = STp->device->request_queue->rq_timeout;
3344 }
3345 DEBC_printk(STp, "Sending FORMAT MEDIUM\n");
3346 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3347 timeout, MAX_RETRIES, 1);
3348 if (!SRpnt)
3349 result = STp->buffer->syscall_result;
3350 return result;
3351}
3352
3353
3354/* Partition the tape into two partitions if size > 0 or one partition if
3355 size == 0.
3356
3357 The block descriptors are read and written because Sony SDT-7000 does not
3358 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
3359
3360 My HP C1533A drive returns only one partition size field. This is used to
3361 set the size of partition 1. There is no size field for the default partition.
3362 Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is
3363 used to set the size of partition 1 (this is what the SCSI-3 standard specifies).
3364 The following algorithm is used to accommodate both drives: if the number of
3365 partition size fields is greater than the maximum number of additional partitions
3366 in the mode page, the second field is used. Otherwise the first field is used.
3367
3368 For Seagate DDS drives the page length must be 8 when no partitions is defined
3369 and 10 when 1 partition is defined (information from Eric Lee Green). This is
3370 is acceptable also to some other old drives and enforced if the first partition
3371 size field is used for the first additional partition size.
3372
3373 For drives that advertize SCSI-3 or newer, use the SSC-3 methods.
3374 */
3375static int partition_tape(struct scsi_tape *STp, int size)
3376{
3377 int result;
3378 int target_partition;
3379 bool scsi3 = STp->device->scsi_level >= SCSI_3, needs_format = false;
3380 int pgo, psd_cnt, psdo;
3381 int psum = PP_MSK_PSUM_MB, units = 0;
3382 unsigned char *bp;
3383
3384 result = read_mode_page(STp, PART_PAGE, 0);
3385 if (result) {
3386 DEBC_printk(STp, "Can't read partition mode page.\n");
3387 return result;
3388 }
3389 target_partition = 1;
3390 if (size < 0) {
3391 target_partition = 0;
3392 size = -size;
3393 }
3394
3395 /* The mode page is in the buffer. Let's modify it and write it. */
3396 bp = (STp->buffer)->b_data;
3397 pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH];
3398 DEBC_printk(STp, "Partition page length is %d bytes.\n",
3399 bp[pgo + MP_OFF_PAGE_LENGTH] + 2);
3400
3401 psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2;
3402
3403 if (scsi3) {
3404 needs_format = (bp[pgo + PP_OFF_FLAGS] & PP_MSK_POFM) != 0;
3405 if (needs_format && size == 0) {
3406 /* No need to write the mode page when clearing
3407 * partitioning
3408 */
3409 DEBC_printk(STp, "Formatting tape with one partition.\n");
3410 result = format_medium(STp, 0);
3411 goto out;
3412 }
3413 if (needs_format) /* Leave the old value for HP DATs claiming SCSI_3 */
3414 psd_cnt = 2;
3415 if ((bp[pgo + PP_OFF_FLAGS] & PP_MSK_PSUM_UNITS) == PP_MSK_PSUM_UNITS) {
3416 /* Use units scaling for large partitions if the device
3417 * suggests it and no precision lost. Required for IBM
3418 * TS1140/50 drives that don't support MB units.
3419 */
3420 if (size >= 1000 && (size % 1000) == 0) {
3421 size /= 1000;
3422 psum = PP_MSK_PSUM_UNITS;
3423 units = 9; /* GB */
3424 }
3425 }
3426 /* Try it anyway if too large to specify in MB */
3427 if (psum == PP_MSK_PSUM_MB && size >= 65534) {
3428 size /= 1000;
3429 psum = PP_MSK_PSUM_UNITS;
3430 units = 9; /* GB */
3431 }
3432 }
3433
3434 if (size >= 65535 || /* Does not fit into two bytes */
3435 (target_partition == 0 && psd_cnt < 2)) {
3436 result = -EINVAL;
3437 goto out;
3438 }
3439
3440 psdo = pgo + PART_PAGE_FIXED_LENGTH;
3441 /* The second condition is for HP DDS which use only one partition size
3442 * descriptor
3443 */
3444 if (target_partition > 0 &&
3445 (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS] ||
3446 bp[pgo + PP_OFF_MAX_ADD_PARTS] != 1)) {
3447 bp[psdo] = bp[psdo + 1] = 0xff; /* Rest to partition 0 */
3448 psdo += 2;
3449 }
3450 memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2);
3451
3452 DEBC_printk(STp, "psd_cnt %d, max.parts %d, nbr_parts %d\n",
3453 psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS],
3454 bp[pgo + PP_OFF_NBR_ADD_PARTS]);
3455
3456 if (size == 0) {
3457 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0;
3458 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS])
3459 bp[pgo + MP_OFF_PAGE_LENGTH] = 6;
3460 DEBC_printk(STp, "Formatting tape with one partition.\n");
3461 } else {
3462 bp[psdo] = (size >> 8) & 0xff;
3463 bp[psdo + 1] = size & 0xff;
3464 if (target_partition == 0)
3465 bp[psdo + 2] = bp[psdo + 3] = 0xff;
3466 bp[pgo + 3] = 1;
3467 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8)
3468 bp[pgo + MP_OFF_PAGE_LENGTH] = 8;
3469 DEBC_printk(STp,
3470 "Formatting tape with two partitions (%i = %d MB).\n",
3471 target_partition, units > 0 ? size * 1000 : size);
3472 }
3473 bp[pgo + PP_OFF_PART_UNITS] = 0;
3474 bp[pgo + PP_OFF_RESERVED] = 0;
3475 if (size != 1 || units != 0) {
3476 bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | psum |
3477 (bp[pgo + PP_OFF_FLAGS] & 0x07);
3478 bp[pgo + PP_OFF_PART_UNITS] = units;
3479 } else
3480 bp[pgo + PP_OFF_FLAGS] = PP_BIT_FDP |
3481 (bp[pgo + PP_OFF_FLAGS] & 0x1f);
3482 bp[pgo + MP_OFF_PAGE_LENGTH] = 6 + psd_cnt * 2;
3483
3484 result = write_mode_page(STp, PART_PAGE, 1);
3485
3486 if (!result && needs_format)
3487 result = format_medium(STp, 1);
3488
3489 if (result) {
3490 st_printk(KERN_INFO, STp, "Partitioning of tape failed.\n");
3491 result = (-EIO);
3492 }
3493
3494out:
3495 return result;
3496}
3497
3498
3499
3500/* The ioctl command */
3501static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3502{
3503 void __user *p = (void __user *)arg;
3504 int i, cmd_nr, cmd_type, bt;
3505 int retval = 0;
3506 unsigned int blk;
3507 struct scsi_tape *STp = file->private_data;
3508 struct st_modedef *STm;
3509 struct st_partstat *STps;
3510
3511 if (mutex_lock_interruptible(&STp->lock))
3512 return -ERESTARTSYS;
3513
3514 DEB(
3515 if (debugging && !STp->in_use) {
3516 st_printk(ST_DEB_MSG, STp, "Incorrect device.\n");
3517 retval = (-EIO);
3518 goto out;
3519 } ) /* end DEB */
3520
3521 STm = &(STp->modes[STp->current_mode]);
3522 STps = &(STp->ps[STp->partition]);
3523
3524 /*
3525 * If we are in the middle of error recovery, don't let anyone
3526 * else try and use this device. Also, if error recovery fails, it
3527 * may try and take the device offline, in which case all further
3528 * access to the device is prohibited.
3529 */
3530 retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in,
3531 file->f_flags & O_NDELAY);
3532 if (retval)
3533 goto out;
3534
3535 cmd_type = _IOC_TYPE(cmd_in);
3536 cmd_nr = _IOC_NR(cmd_in);
3537
3538 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
3539 struct mtop mtc;
3540
3541 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
3542 retval = (-EINVAL);
3543 goto out;
3544 }
3545
3546 i = copy_from_user(&mtc, p, sizeof(struct mtop));
3547 if (i) {
3548 retval = (-EFAULT);
3549 goto out;
3550 }
3551
3552 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
3553 st_printk(KERN_WARNING, STp,
3554 "MTSETDRVBUFFER only allowed for root.\n");
3555 retval = (-EPERM);
3556 goto out;
3557 }
3558 if (!STm->defined &&
3559 (mtc.mt_op != MTSETDRVBUFFER &&
3560 (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
3561 retval = (-ENXIO);
3562 goto out;
3563 }
3564
3565 if (!STp->pos_unknown) {
3566
3567 if (STps->eof == ST_FM_HIT) {
3568 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3569 mtc.mt_op == MTEOM) {
3570 mtc.mt_count -= 1;
3571 if (STps->drv_file >= 0)
3572 STps->drv_file += 1;
3573 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
3574 mtc.mt_count += 1;
3575 if (STps->drv_file >= 0)
3576 STps->drv_file += 1;
3577 }
3578 }
3579
3580 if (mtc.mt_op == MTSEEK) {
3581 /* Old position must be restored if partition will be
3582 changed */
3583 i = !STp->can_partitions ||
3584 (STp->new_partition != STp->partition);
3585 } else {
3586 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3587 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
3588 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
3589 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3590 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
3591 mtc.mt_op == MTCOMPRESSION;
3592 }
3593 i = flush_buffer(STp, i);
3594 if (i < 0) {
3595 retval = i;
3596 goto out;
3597 }
3598 if (STps->rw == ST_WRITING &&
3599 (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3600 mtc.mt_op == MTSEEK ||
3601 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) {
3602 i = st_int_ioctl(STp, MTWEOF, 1);
3603 if (i < 0) {
3604 retval = i;
3605 goto out;
3606 }
3607 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)
3608 mtc.mt_count++;
3609 STps->rw = ST_IDLE;
3610 }
3611
3612 } else {
3613 /*
3614 * If there was a bus reset, block further access
3615 * to this device. If the user wants to rewind the tape,
3616 * then reset the flag and allow access again.
3617 */
3618 if (mtc.mt_op != MTREW &&
3619 mtc.mt_op != MTOFFL &&
3620 mtc.mt_op != MTRETEN &&
3621 mtc.mt_op != MTERASE &&
3622 mtc.mt_op != MTSEEK &&
3623 mtc.mt_op != MTEOM) {
3624 retval = (-EIO);
3625 goto out;
3626 }
3627 reset_state(STp);
3628 /* remove this when the midlevel properly clears was_reset */
3629 STp->device->was_reset = 0;
3630 }
3631
3632 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
3633 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM &&
3634 mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART)
3635 STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */
3636
3637 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
3638 do_door_lock(STp, 0); /* Ignore result! */
3639
3640 if (mtc.mt_op == MTSETDRVBUFFER &&
3641 (mtc.mt_count & MT_ST_OPTIONS) != 0) {
3642 retval = st_set_options(STp, mtc.mt_count);
3643 goto out;
3644 }
3645
3646 if (mtc.mt_op == MTSETPART) {
3647 if (!STp->can_partitions ||
3648 mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) {
3649 retval = (-EINVAL);
3650 goto out;
3651 }
3652 if (mtc.mt_count >= STp->nbr_partitions &&
3653 (STp->nbr_partitions = nbr_partitions(STp)) < 0) {
3654 retval = (-EIO);
3655 goto out;
3656 }
3657 if (mtc.mt_count >= STp->nbr_partitions) {
3658 retval = (-EINVAL);
3659 goto out;
3660 }
3661 STp->new_partition = mtc.mt_count;
3662 retval = 0;
3663 goto out;
3664 }
3665
3666 if (mtc.mt_op == MTMKPART) {
3667 if (!STp->can_partitions) {
3668 retval = (-EINVAL);
3669 goto out;
3670 }
3671 i = do_load_unload(STp, file, 1);
3672 if (i < 0) {
3673 retval = i;
3674 goto out;
3675 }
3676 i = partition_tape(STp, mtc.mt_count);
3677 if (i < 0) {
3678 retval = i;
3679 goto out;
3680 }
3681 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3682 STp->ps[i].rw = ST_IDLE;
3683 STp->ps[i].at_sm = 0;
3684 STp->ps[i].last_block_valid = 0;
3685 }
3686 STp->partition = STp->new_partition = 0;
3687 STp->nbr_partitions = mtc.mt_count != 0 ? 2 : 1;
3688 STps->drv_block = STps->drv_file = 0;
3689 retval = 0;
3690 goto out;
3691 }
3692
3693 if (mtc.mt_op == MTSEEK) {
3694 i = set_location(STp, mtc.mt_count, STp->new_partition, 0);
3695 if (!STp->can_partitions)
3696 STp->ps[0].rw = ST_IDLE;
3697 retval = i;
3698 goto out;
3699 }
3700
3701 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) {
3702 retval = do_load_unload(STp, file, 0);
3703 goto out;
3704 }
3705
3706 if (mtc.mt_op == MTLOAD) {
3707 retval = do_load_unload(STp, file, max(1, mtc.mt_count));
3708 goto out;
3709 }
3710
3711 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
3712 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
3713 goto out;
3714 }
3715
3716 if (STp->can_partitions && STp->ready == ST_READY &&
3717 (i = switch_partition(STp)) < 0) {
3718 retval = i;
3719 goto out;
3720 }
3721
3722 if (mtc.mt_op == MTCOMPRESSION)
3723 retval = st_compression(STp, (mtc.mt_count & 1));
3724 else
3725 retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count);
3726 goto out;
3727 }
3728 if (!STm->defined) {
3729 retval = (-ENXIO);
3730 goto out;
3731 }
3732
3733 if ((i = flush_buffer(STp, 0)) < 0) {
3734 retval = i;
3735 goto out;
3736 }
3737 if (STp->can_partitions &&
3738 (i = switch_partition(STp)) < 0) {
3739 retval = i;
3740 goto out;
3741 }
3742
3743 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
3744 struct mtget mt_status;
3745
3746 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
3747 retval = (-EINVAL);
3748 goto out;
3749 }
3750
3751 mt_status.mt_type = STp->tape_type;
3752 mt_status.mt_dsreg =
3753 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
3754 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
3755 mt_status.mt_blkno = STps->drv_block;
3756 mt_status.mt_fileno = STps->drv_file;
3757 if (STp->block_size != 0) {
3758 if (STps->rw == ST_WRITING)
3759 mt_status.mt_blkno +=
3760 (STp->buffer)->buffer_bytes / STp->block_size;
3761 else if (STps->rw == ST_READING)
3762 mt_status.mt_blkno -=
3763 ((STp->buffer)->buffer_bytes +
3764 STp->block_size - 1) / STp->block_size;
3765 }
3766
3767 mt_status.mt_gstat = 0;
3768 if (STp->drv_write_prot)
3769 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
3770 if (mt_status.mt_blkno == 0) {
3771 if (mt_status.mt_fileno == 0)
3772 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
3773 else
3774 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
3775 }
3776 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT);
3777 mt_status.mt_resid = STp->partition;
3778 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
3779 mt_status.mt_gstat |= GMT_EOT(0xffffffff);
3780 else if (STps->eof >= ST_EOM_OK)
3781 mt_status.mt_gstat |= GMT_EOD(0xffffffff);
3782 if (STp->density == 1)
3783 mt_status.mt_gstat |= GMT_D_800(0xffffffff);
3784 else if (STp->density == 2)
3785 mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
3786 else if (STp->density == 3)
3787 mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
3788 if (STp->ready == ST_READY)
3789 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
3790 if (STp->ready == ST_NO_TAPE)
3791 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
3792 if (STps->at_sm)
3793 mt_status.mt_gstat |= GMT_SM(0xffffffff);
3794 if (STm->do_async_writes ||
3795 (STm->do_buffer_writes && STp->block_size != 0) ||
3796 STp->drv_buffer != 0)
3797 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
3798 if (STp->cleaning_req)
3799 mt_status.mt_gstat |= GMT_CLN(0xffffffff);
3800
3801 retval = put_user_mtget(p, &mt_status);
3802 if (retval)
3803 goto out;
3804
3805 STp->recover_reg = 0; /* Clear after read */
3806 goto out;
3807 } /* End of MTIOCGET */
3808 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
3809 struct mtpos mt_pos;
3810 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
3811 retval = (-EINVAL);
3812 goto out;
3813 }
3814 if ((i = get_location(STp, &blk, &bt, 0)) < 0) {
3815 retval = i;
3816 goto out;
3817 }
3818 mt_pos.mt_blkno = blk;
3819 retval = put_user_mtpos(p, &mt_pos);
3820 goto out;
3821 }
3822 mutex_unlock(&STp->lock);
3823
3824 switch (cmd_in) {
3825 case SG_IO:
3826 case SCSI_IOCTL_SEND_COMMAND:
3827 case CDROM_SEND_PACKET:
3828 if (!capable(CAP_SYS_RAWIO))
3829 return -EPERM;
3830 break;
3831 default:
3832 break;
3833 }
3834
3835 retval = scsi_ioctl(STp->device, file->f_mode, cmd_in, p);
3836 if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) {
3837 /* unload */
3838 STp->rew_at_close = 0;
3839 STp->ready = ST_NO_TAPE;
3840 }
3841 return retval;
3842
3843 out:
3844 mutex_unlock(&STp->lock);
3845 return retval;
3846}
3847
3848#ifdef CONFIG_COMPAT
3849static long st_compat_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3850{
3851 /* argument conversion is handled using put_user_mtpos/put_user_mtget */
3852 switch (cmd_in) {
3853 case MTIOCPOS32:
3854 cmd_in = MTIOCPOS;
3855 break;
3856 case MTIOCGET32:
3857 cmd_in = MTIOCGET;
3858 break;
3859 }
3860
3861 return st_ioctl(file, cmd_in, arg);
3862}
3863#endif
3864
3865
3866
3867/* Try to allocate a new tape buffer. Calling function must not hold
3868 dev_arr_lock. */
3869static struct st_buffer *new_tape_buffer(int max_sg)
3870{
3871 struct st_buffer *tb;
3872
3873 tb = kzalloc(sizeof(struct st_buffer), GFP_KERNEL);
3874 if (!tb) {
3875 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
3876 return NULL;
3877 }
3878 tb->frp_segs = 0;
3879 tb->use_sg = max_sg;
3880 tb->buffer_size = 0;
3881
3882 tb->reserved_pages = kcalloc(max_sg, sizeof(struct page *),
3883 GFP_KERNEL);
3884 if (!tb->reserved_pages) {
3885 kfree(tb);
3886 return NULL;
3887 }
3888
3889 return tb;
3890}
3891
3892
3893/* Try to allocate enough space in the tape buffer */
3894#define ST_MAX_ORDER 6
3895
3896static int enlarge_buffer(struct st_buffer * STbuffer, int new_size)
3897{
3898 int segs, max_segs, b_size, order, got;
3899 gfp_t priority;
3900
3901 if (new_size <= STbuffer->buffer_size)
3902 return 1;
3903
3904 if (STbuffer->buffer_size <= PAGE_SIZE)
3905 normalize_buffer(STbuffer); /* Avoid extra segment */
3906
3907 max_segs = STbuffer->use_sg;
3908
3909 priority = GFP_KERNEL | __GFP_NOWARN;
3910
3911 if (STbuffer->cleared)
3912 priority |= __GFP_ZERO;
3913
3914 if (STbuffer->frp_segs) {
3915 order = STbuffer->reserved_page_order;
3916 b_size = PAGE_SIZE << order;
3917 } else {
3918 for (b_size = PAGE_SIZE, order = 0;
3919 order < ST_MAX_ORDER &&
3920 max_segs * (PAGE_SIZE << order) < new_size;
3921 order++, b_size *= 2)
3922 ; /* empty */
3923 STbuffer->reserved_page_order = order;
3924 }
3925 if (max_segs * (PAGE_SIZE << order) < new_size) {
3926 if (order == ST_MAX_ORDER)
3927 return 0;
3928 normalize_buffer(STbuffer);
3929 return enlarge_buffer(STbuffer, new_size);
3930 }
3931
3932 for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size;
3933 segs < max_segs && got < new_size;) {
3934 struct page *page;
3935
3936 page = alloc_pages(priority, order);
3937 if (!page) {
3938 DEB(STbuffer->buffer_size = got);
3939 normalize_buffer(STbuffer);
3940 return 0;
3941 }
3942
3943 STbuffer->frp_segs += 1;
3944 got += b_size;
3945 STbuffer->buffer_size = got;
3946 STbuffer->reserved_pages[segs] = page;
3947 segs++;
3948 }
3949 STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
3950
3951 return 1;
3952}
3953
3954
3955/* Make sure that no data from previous user is in the internal buffer */
3956static void clear_buffer(struct st_buffer * st_bp)
3957{
3958 int i;
3959
3960 for (i=0; i < st_bp->frp_segs; i++)
3961 memset(page_address(st_bp->reserved_pages[i]), 0,
3962 PAGE_SIZE << st_bp->reserved_page_order);
3963 st_bp->cleared = 1;
3964}
3965
3966
3967/* Release the extra buffer */
3968static void normalize_buffer(struct st_buffer * STbuffer)
3969{
3970 int i, order = STbuffer->reserved_page_order;
3971
3972 for (i = 0; i < STbuffer->frp_segs; i++) {
3973 __free_pages(STbuffer->reserved_pages[i], order);
3974 STbuffer->buffer_size -= (PAGE_SIZE << order);
3975 }
3976 STbuffer->frp_segs = 0;
3977 STbuffer->sg_segs = 0;
3978 STbuffer->reserved_page_order = 0;
3979 STbuffer->map_data.offset = 0;
3980}
3981
3982
3983/* Move data from the user buffer to the tape buffer. Returns zero (success) or
3984 negative error code. */
3985static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
3986{
3987 int i, cnt, res, offset;
3988 int length = PAGE_SIZE << st_bp->reserved_page_order;
3989
3990 for (i = 0, offset = st_bp->buffer_bytes;
3991 i < st_bp->frp_segs && offset >= length; i++)
3992 offset -= length;
3993 if (i == st_bp->frp_segs) { /* Should never happen */
3994 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
3995 return (-EIO);
3996 }
3997 for (; i < st_bp->frp_segs && do_count > 0; i++) {
3998 struct page *page = st_bp->reserved_pages[i];
3999 cnt = length - offset < do_count ? length - offset : do_count;
4000 res = copy_from_user(page_address(page) + offset, ubp, cnt);
4001 if (res)
4002 return (-EFAULT);
4003 do_count -= cnt;
4004 st_bp->buffer_bytes += cnt;
4005 ubp += cnt;
4006 offset = 0;
4007 }
4008 if (do_count) /* Should never happen */
4009 return (-EIO);
4010
4011 return 0;
4012}
4013
4014
4015/* Move data from the tape buffer to the user buffer. Returns zero (success) or
4016 negative error code. */
4017static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
4018{
4019 int i, cnt, res, offset;
4020 int length = PAGE_SIZE << st_bp->reserved_page_order;
4021
4022 for (i = 0, offset = st_bp->read_pointer;
4023 i < st_bp->frp_segs && offset >= length; i++)
4024 offset -= length;
4025 if (i == st_bp->frp_segs) { /* Should never happen */
4026 printk(KERN_WARNING "st: from_buffer offset overflow.\n");
4027 return (-EIO);
4028 }
4029 for (; i < st_bp->frp_segs && do_count > 0; i++) {
4030 struct page *page = st_bp->reserved_pages[i];
4031 cnt = length - offset < do_count ? length - offset : do_count;
4032 res = copy_to_user(ubp, page_address(page) + offset, cnt);
4033 if (res)
4034 return (-EFAULT);
4035 do_count -= cnt;
4036 st_bp->buffer_bytes -= cnt;
4037 st_bp->read_pointer += cnt;
4038 ubp += cnt;
4039 offset = 0;
4040 }
4041 if (do_count) /* Should never happen */
4042 return (-EIO);
4043
4044 return 0;
4045}
4046
4047
4048/* Move data towards start of buffer */
4049static void move_buffer_data(struct st_buffer * st_bp, int offset)
4050{
4051 int src_seg, dst_seg, src_offset = 0, dst_offset;
4052 int count, total;
4053 int length = PAGE_SIZE << st_bp->reserved_page_order;
4054
4055 if (offset == 0)
4056 return;
4057
4058 total=st_bp->buffer_bytes - offset;
4059 for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) {
4060 src_offset = offset;
4061 if (src_offset < length)
4062 break;
4063 offset -= length;
4064 }
4065
4066 st_bp->buffer_bytes = st_bp->read_pointer = total;
4067 for (dst_seg=dst_offset=0; total > 0; ) {
4068 struct page *dpage = st_bp->reserved_pages[dst_seg];
4069 struct page *spage = st_bp->reserved_pages[src_seg];
4070
4071 count = min(length - dst_offset, length - src_offset);
4072 memmove(page_address(dpage) + dst_offset,
4073 page_address(spage) + src_offset, count);
4074 src_offset += count;
4075 if (src_offset >= length) {
4076 src_seg++;
4077 src_offset = 0;
4078 }
4079 dst_offset += count;
4080 if (dst_offset >= length) {
4081 dst_seg++;
4082 dst_offset = 0;
4083 }
4084 total -= count;
4085 }
4086}
4087
4088/* Validate the options from command line or module parameters */
4089static void validate_options(void)
4090{
4091 if (buffer_kbs > 0)
4092 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE;
4093 if (max_sg_segs >= ST_FIRST_SG)
4094 st_max_sg_segs = max_sg_segs;
4095}
4096
4097#ifndef MODULE
4098/* Set the boot options. Syntax is defined in Documenation/scsi/st.txt.
4099 */
4100static int __init st_setup(char *str)
4101{
4102 int i, len, ints[5];
4103 char *stp;
4104
4105 stp = get_options(str, ARRAY_SIZE(ints), ints);
4106
4107 if (ints[0] > 0) {
4108 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
4109 if (parms[i].val)
4110 *parms[i].val = ints[i + 1];
4111 } else {
4112 while (stp != NULL) {
4113 for (i = 0; i < ARRAY_SIZE(parms); i++) {
4114 len = strlen(parms[i].name);
4115 if (!strncmp(stp, parms[i].name, len) &&
4116 (*(stp + len) == ':' || *(stp + len) == '=')) {
4117 if (parms[i].val)
4118 *parms[i].val =
4119 simple_strtoul(stp + len + 1, NULL, 0);
4120 else
4121 printk(KERN_WARNING "st: Obsolete parameter %s\n",
4122 parms[i].name);
4123 break;
4124 }
4125 }
4126 if (i >= ARRAY_SIZE(parms))
4127 printk(KERN_WARNING "st: invalid parameter in '%s'\n",
4128 stp);
4129 stp = strchr(stp, ',');
4130 if (stp)
4131 stp++;
4132 }
4133 }
4134
4135 validate_options();
4136
4137 return 1;
4138}
4139
4140__setup("st=", st_setup);
4141
4142#endif
4143
4144static const struct file_operations st_fops =
4145{
4146 .owner = THIS_MODULE,
4147 .read = st_read,
4148 .write = st_write,
4149 .unlocked_ioctl = st_ioctl,
4150#ifdef CONFIG_COMPAT
4151 .compat_ioctl = st_compat_ioctl,
4152#endif
4153 .open = st_open,
4154 .flush = st_flush,
4155 .release = st_release,
4156 .llseek = noop_llseek,
4157};
4158
4159static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
4160{
4161 int i, error;
4162 dev_t cdev_devno;
4163 struct cdev *cdev;
4164 struct device *dev;
4165 struct st_modedef *STm = &(tape->modes[mode]);
4166 char name[10];
4167 int dev_num = tape->index;
4168
4169 cdev_devno = MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, rew));
4170
4171 cdev = cdev_alloc();
4172 if (!cdev) {
4173 pr_err("st%d: out of memory. Device not attached.\n", dev_num);
4174 error = -ENOMEM;
4175 goto out;
4176 }
4177 cdev->owner = THIS_MODULE;
4178 cdev->ops = &st_fops;
4179 STm->cdevs[rew] = cdev;
4180
4181 error = cdev_add(cdev, cdev_devno, 1);
4182 if (error) {
4183 pr_err("st%d: Can't add %s-rewind mode %d\n", dev_num,
4184 rew ? "non" : "auto", mode);
4185 pr_err("st%d: Device not attached.\n", dev_num);
4186 goto out_free;
4187 }
4188
4189 i = mode << (4 - ST_NBR_MODE_BITS);
4190 snprintf(name, 10, "%s%s%s", rew ? "n" : "",
4191 tape->name, st_formats[i]);
4192
4193 dev = device_create(&st_sysfs_class, &tape->device->sdev_gendev,
4194 cdev_devno, &tape->modes[mode], "%s", name);
4195 if (IS_ERR(dev)) {
4196 pr_err("st%d: device_create failed\n", dev_num);
4197 error = PTR_ERR(dev);
4198 goto out_free;
4199 }
4200
4201 STm->devs[rew] = dev;
4202
4203 return 0;
4204out_free:
4205 cdev_del(STm->cdevs[rew]);
4206out:
4207 STm->cdevs[rew] = NULL;
4208 STm->devs[rew] = NULL;
4209 return error;
4210}
4211
4212static int create_cdevs(struct scsi_tape *tape)
4213{
4214 int mode, error;
4215 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4216 error = create_one_cdev(tape, mode, 0);
4217 if (error)
4218 return error;
4219 error = create_one_cdev(tape, mode, 1);
4220 if (error)
4221 return error;
4222 }
4223
4224 return sysfs_create_link(&tape->device->sdev_gendev.kobj,
4225 &tape->modes[0].devs[0]->kobj, "tape");
4226}
4227
4228static void remove_cdevs(struct scsi_tape *tape)
4229{
4230 int mode, rew;
4231 sysfs_remove_link(&tape->device->sdev_gendev.kobj, "tape");
4232 for (mode = 0; mode < ST_NBR_MODES; mode++) {
4233 struct st_modedef *STm = &(tape->modes[mode]);
4234 for (rew = 0; rew < 2; rew++) {
4235 if (STm->cdevs[rew])
4236 cdev_del(STm->cdevs[rew]);
4237 if (STm->devs[rew])
4238 device_unregister(STm->devs[rew]);
4239 }
4240 }
4241}
4242
4243static int st_probe(struct device *dev)
4244{
4245 struct scsi_device *SDp = to_scsi_device(dev);
4246 struct scsi_tape *tpnt = NULL;
4247 struct st_modedef *STm;
4248 struct st_partstat *STps;
4249 struct st_buffer *buffer;
4250 int i, error;
4251
4252 if (SDp->type != TYPE_TAPE)
4253 return -ENODEV;
4254 if (st_incompatible(SDp)) {
4255 sdev_printk(KERN_INFO, SDp,
4256 "OnStream tapes are no longer supported;\n");
4257 sdev_printk(KERN_INFO, SDp,
4258 "please mail to linux-scsi@vger.kernel.org.\n");
4259 return -ENODEV;
4260 }
4261
4262 scsi_autopm_get_device(SDp);
4263 i = queue_max_segments(SDp->request_queue);
4264 if (st_max_sg_segs < i)
4265 i = st_max_sg_segs;
4266 buffer = new_tape_buffer(i);
4267 if (buffer == NULL) {
4268 sdev_printk(KERN_ERR, SDp,
4269 "st: Can't allocate new tape buffer. "
4270 "Device not attached.\n");
4271 goto out;
4272 }
4273
4274 tpnt = kzalloc(sizeof(struct scsi_tape), GFP_KERNEL);
4275 if (tpnt == NULL) {
4276 sdev_printk(KERN_ERR, SDp,
4277 "st: Can't allocate device descriptor.\n");
4278 goto out_buffer_free;
4279 }
4280 kref_init(&tpnt->kref);
4281
4282 tpnt->device = SDp;
4283 if (SDp->scsi_level <= 2)
4284 tpnt->tape_type = MT_ISSCSI1;
4285 else
4286 tpnt->tape_type = MT_ISSCSI2;
4287
4288 tpnt->buffer = buffer;
4289 tpnt->buffer->last_SRpnt = NULL;
4290
4291 tpnt->inited = 0;
4292 tpnt->dirty = 0;
4293 tpnt->in_use = 0;
4294 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
4295 tpnt->use_pf = (SDp->scsi_level >= SCSI_2);
4296 tpnt->density = 0;
4297 tpnt->do_auto_lock = ST_AUTO_LOCK;
4298 tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */
4299 tpnt->can_partitions = 0;
4300 tpnt->two_fm = ST_TWO_FM;
4301 tpnt->fast_mteom = ST_FAST_MTEOM;
4302 tpnt->scsi2_logical = ST_SCSI2LOGICAL;
4303 tpnt->sili = ST_SILI;
4304 tpnt->immediate = ST_NOWAIT;
4305 tpnt->immediate_filemark = 0;
4306 tpnt->default_drvbuffer = 0xff; /* No forced buffering */
4307 tpnt->partition = 0;
4308 tpnt->new_partition = 0;
4309 tpnt->nbr_partitions = 0;
4310 blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT);
4311 tpnt->long_timeout = ST_LONG_TIMEOUT;
4312 tpnt->try_dio = try_direct_io;
4313
4314 for (i = 0; i < ST_NBR_MODES; i++) {
4315 STm = &(tpnt->modes[i]);
4316 STm->defined = 0;
4317 STm->sysv = ST_SYSV;
4318 STm->defaults_for_writes = 0;
4319 STm->do_async_writes = ST_ASYNC_WRITES;
4320 STm->do_buffer_writes = ST_BUFFER_WRITES;
4321 STm->do_read_ahead = ST_READ_AHEAD;
4322 STm->default_compression = ST_DONT_TOUCH;
4323 STm->default_blksize = (-1); /* No forced size */
4324 STm->default_density = (-1); /* No forced density */
4325 STm->tape = tpnt;
4326 }
4327
4328 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
4329 STps = &(tpnt->ps[i]);
4330 STps->rw = ST_IDLE;
4331 STps->eof = ST_NOEOF;
4332 STps->at_sm = 0;
4333 STps->last_block_valid = 0;
4334 STps->drv_block = (-1);
4335 STps->drv_file = (-1);
4336 }
4337
4338 tpnt->current_mode = 0;
4339 tpnt->modes[0].defined = 1;
4340
4341 tpnt->density_changed = tpnt->compression_changed =
4342 tpnt->blksize_changed = 0;
4343 mutex_init(&tpnt->lock);
4344
4345 idr_preload(GFP_KERNEL);
4346 spin_lock(&st_index_lock);
4347 error = idr_alloc(&st_index_idr, tpnt, 0, ST_MAX_TAPES + 1, GFP_NOWAIT);
4348 spin_unlock(&st_index_lock);
4349 idr_preload_end();
4350 if (error < 0) {
4351 pr_warn("st: idr allocation failed: %d\n", error);
4352 goto out_free_tape;
4353 }
4354 tpnt->index = error;
4355 sprintf(tpnt->name, "st%d", tpnt->index);
4356 tpnt->stats = kzalloc(sizeof(struct scsi_tape_stats), GFP_KERNEL);
4357 if (tpnt->stats == NULL) {
4358 sdev_printk(KERN_ERR, SDp,
4359 "st: Can't allocate statistics.\n");
4360 goto out_idr_remove;
4361 }
4362
4363 dev_set_drvdata(dev, tpnt);
4364
4365
4366 error = create_cdevs(tpnt);
4367 if (error)
4368 goto out_remove_devs;
4369 scsi_autopm_put_device(SDp);
4370
4371 sdev_printk(KERN_NOTICE, SDp,
4372 "Attached scsi tape %s\n", tpnt->name);
4373 sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
4374 tpnt->name, tpnt->try_dio ? "yes" : "no",
4375 queue_dma_alignment(SDp->request_queue) + 1);
4376
4377 return 0;
4378
4379out_remove_devs:
4380 remove_cdevs(tpnt);
4381 kfree(tpnt->stats);
4382out_idr_remove:
4383 spin_lock(&st_index_lock);
4384 idr_remove(&st_index_idr, tpnt->index);
4385 spin_unlock(&st_index_lock);
4386out_free_tape:
4387 kfree(tpnt);
4388out_buffer_free:
4389 kfree(buffer);
4390out:
4391 scsi_autopm_put_device(SDp);
4392 return -ENODEV;
4393};
4394
4395
4396static int st_remove(struct device *dev)
4397{
4398 struct scsi_tape *tpnt = dev_get_drvdata(dev);
4399 int index = tpnt->index;
4400
4401 scsi_autopm_get_device(to_scsi_device(dev));
4402 remove_cdevs(tpnt);
4403
4404 mutex_lock(&st_ref_mutex);
4405 kref_put(&tpnt->kref, scsi_tape_release);
4406 mutex_unlock(&st_ref_mutex);
4407 spin_lock(&st_index_lock);
4408 idr_remove(&st_index_idr, index);
4409 spin_unlock(&st_index_lock);
4410 return 0;
4411}
4412
4413/**
4414 * scsi_tape_release - Called to free the Scsi_Tape structure
4415 * @kref: pointer to embedded kref
4416 *
4417 * st_ref_mutex must be held entering this routine. Because it is
4418 * called on last put, you should always use the scsi_tape_get()
4419 * scsi_tape_put() helpers which manipulate the semaphore directly
4420 * and never do a direct kref_put().
4421 **/
4422static void scsi_tape_release(struct kref *kref)
4423{
4424 struct scsi_tape *tpnt = to_scsi_tape(kref);
4425
4426 tpnt->device = NULL;
4427
4428 if (tpnt->buffer) {
4429 normalize_buffer(tpnt->buffer);
4430 kfree(tpnt->buffer->reserved_pages);
4431 kfree(tpnt->buffer);
4432 }
4433
4434 kfree(tpnt->stats);
4435 kfree(tpnt);
4436 return;
4437}
4438
4439static struct class st_sysfs_class = {
4440 .name = "scsi_tape",
4441 .dev_groups = st_dev_groups,
4442};
4443
4444static int __init init_st(void)
4445{
4446 int err;
4447
4448 validate_options();
4449
4450 printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
4451 verstr, st_fixed_buffer_size, st_max_sg_segs);
4452
4453 debugging = (debug_flag > 0) ? debug_flag : NO_DEBUG;
4454 if (debugging) {
4455 printk(KERN_INFO "st: Debugging enabled debug_flag = %d\n",
4456 debugging);
4457 }
4458
4459 err = class_register(&st_sysfs_class);
4460 if (err) {
4461 pr_err("Unable register sysfs class for SCSI tapes\n");
4462 return err;
4463 }
4464
4465 err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4466 ST_MAX_TAPE_ENTRIES, "st");
4467 if (err) {
4468 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
4469 SCSI_TAPE_MAJOR);
4470 goto err_class;
4471 }
4472
4473 err = scsi_register_driver(&st_template.gendrv);
4474 if (err)
4475 goto err_chrdev;
4476
4477 return 0;
4478
4479err_chrdev:
4480 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4481 ST_MAX_TAPE_ENTRIES);
4482err_class:
4483 class_unregister(&st_sysfs_class);
4484 return err;
4485}
4486
4487static void __exit exit_st(void)
4488{
4489 scsi_unregister_driver(&st_template.gendrv);
4490 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4491 ST_MAX_TAPE_ENTRIES);
4492 class_unregister(&st_sysfs_class);
4493 idr_destroy(&st_index_idr);
4494 printk(KERN_INFO "st: Unloaded.\n");
4495}
4496
4497module_init(init_st);
4498module_exit(exit_st);
4499
4500
4501/* The sysfs driver interface. Read-only at the moment */
4502static ssize_t try_direct_io_show(struct device_driver *ddp, char *buf)
4503{
4504 return scnprintf(buf, PAGE_SIZE, "%d\n", try_direct_io);
4505}
4506static DRIVER_ATTR_RO(try_direct_io);
4507
4508static ssize_t fixed_buffer_size_show(struct device_driver *ddp, char *buf)
4509{
4510 return scnprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size);
4511}
4512static DRIVER_ATTR_RO(fixed_buffer_size);
4513
4514static ssize_t max_sg_segs_show(struct device_driver *ddp, char *buf)
4515{
4516 return scnprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs);
4517}
4518static DRIVER_ATTR_RO(max_sg_segs);
4519
4520static ssize_t version_show(struct device_driver *ddd, char *buf)
4521{
4522 return scnprintf(buf, PAGE_SIZE, "[%s]\n", verstr);
4523}
4524static DRIVER_ATTR_RO(version);
4525
4526#if DEBUG
4527static ssize_t debug_flag_store(struct device_driver *ddp,
4528 const char *buf, size_t count)
4529{
4530/* We only care what the first byte of the data is the rest is unused.
4531 * if it's a '1' we turn on debug and if it's a '0' we disable it. All
4532 * other values have -EINVAL returned if they are passed in.
4533 */
4534 if (count > 0) {
4535 if (buf[0] == '0') {
4536 debugging = NO_DEBUG;
4537 return count;
4538 } else if (buf[0] == '1') {
4539 debugging = 1;
4540 return count;
4541 }
4542 }
4543 return -EINVAL;
4544}
4545
4546static ssize_t debug_flag_show(struct device_driver *ddp, char *buf)
4547{
4548 return scnprintf(buf, PAGE_SIZE, "%d\n", debugging);
4549}
4550static DRIVER_ATTR_RW(debug_flag);
4551#endif
4552
4553static struct attribute *st_drv_attrs[] = {
4554 &driver_attr_try_direct_io.attr,
4555 &driver_attr_fixed_buffer_size.attr,
4556 &driver_attr_max_sg_segs.attr,
4557 &driver_attr_version.attr,
4558#if DEBUG
4559 &driver_attr_debug_flag.attr,
4560#endif
4561 NULL,
4562};
4563ATTRIBUTE_GROUPS(st_drv);
4564
4565/* The sysfs simple class interface */
4566static ssize_t
4567defined_show(struct device *dev, struct device_attribute *attr, char *buf)
4568{
4569 struct st_modedef *STm = dev_get_drvdata(dev);
4570 ssize_t l = 0;
4571
4572 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined);
4573 return l;
4574}
4575static DEVICE_ATTR_RO(defined);
4576
4577static ssize_t
4578default_blksize_show(struct device *dev, struct device_attribute *attr,
4579 char *buf)
4580{
4581 struct st_modedef *STm = dev_get_drvdata(dev);
4582 ssize_t l = 0;
4583
4584 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize);
4585 return l;
4586}
4587static DEVICE_ATTR_RO(default_blksize);
4588
4589static ssize_t
4590default_density_show(struct device *dev, struct device_attribute *attr,
4591 char *buf)
4592{
4593 struct st_modedef *STm = dev_get_drvdata(dev);
4594 ssize_t l = 0;
4595 char *fmt;
4596
4597 fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n";
4598 l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density);
4599 return l;
4600}
4601static DEVICE_ATTR_RO(default_density);
4602
4603static ssize_t
4604default_compression_show(struct device *dev, struct device_attribute *attr,
4605 char *buf)
4606{
4607 struct st_modedef *STm = dev_get_drvdata(dev);
4608 ssize_t l = 0;
4609
4610 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1);
4611 return l;
4612}
4613static DEVICE_ATTR_RO(default_compression);
4614
4615static ssize_t
4616options_show(struct device *dev, struct device_attribute *attr, char *buf)
4617{
4618 struct st_modedef *STm = dev_get_drvdata(dev);
4619 struct scsi_tape *STp = STm->tape;
4620 int options;
4621 ssize_t l = 0;
4622
4623 options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0;
4624 options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0;
4625 options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0;
4626 DEB( options |= debugging ? MT_ST_DEBUGGING : 0 );
4627 options |= STp->two_fm ? MT_ST_TWO_FM : 0;
4628 options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0;
4629 options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0;
4630 options |= STp->can_bsr ? MT_ST_CAN_BSR : 0;
4631 options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0;
4632 options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0;
4633 options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
4634 options |= STm->sysv ? MT_ST_SYSV : 0;
4635 options |= STp->immediate ? MT_ST_NOWAIT : 0;
4636 options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0;
4637 options |= STp->sili ? MT_ST_SILI : 0;
4638
4639 l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
4640 return l;
4641}
4642static DEVICE_ATTR_RO(options);
4643
4644/* Support for tape stats */
4645
4646/**
4647 * read_cnt_show - return read count - count of reads made from tape drive
4648 * @dev: struct device
4649 * @attr: attribute structure
4650 * @buf: buffer to return formatted data in
4651 */
4652static ssize_t read_cnt_show(struct device *dev,
4653 struct device_attribute *attr, char *buf)
4654{
4655 struct st_modedef *STm = dev_get_drvdata(dev);
4656
4657 return sprintf(buf, "%lld",
4658 (long long)atomic64_read(&STm->tape->stats->read_cnt));
4659}
4660static DEVICE_ATTR_RO(read_cnt);
4661
4662/**
4663 * read_byte_cnt_show - return read byte count - tape drives
4664 * may use blocks less than 512 bytes this gives the raw byte count of
4665 * of data read from the tape drive.
4666 * @dev: struct device
4667 * @attr: attribute structure
4668 * @buf: buffer to return formatted data in
4669 */
4670static ssize_t read_byte_cnt_show(struct device *dev,
4671 struct device_attribute *attr, char *buf)
4672{
4673 struct st_modedef *STm = dev_get_drvdata(dev);
4674
4675 return sprintf(buf, "%lld",
4676 (long long)atomic64_read(&STm->tape->stats->read_byte_cnt));
4677}
4678static DEVICE_ATTR_RO(read_byte_cnt);
4679
4680/**
4681 * read_ns_show - return read ns - overall time spent waiting on reads in ns.
4682 * @dev: struct device
4683 * @attr: attribute structure
4684 * @buf: buffer to return formatted data in
4685 */
4686static ssize_t read_ns_show(struct device *dev,
4687 struct device_attribute *attr, char *buf)
4688{
4689 struct st_modedef *STm = dev_get_drvdata(dev);
4690
4691 return sprintf(buf, "%lld",
4692 (long long)atomic64_read(&STm->tape->stats->tot_read_time));
4693}
4694static DEVICE_ATTR_RO(read_ns);
4695
4696/**
4697 * write_cnt_show - write count - number of user calls
4698 * to write(2) that have written data to tape.
4699 * @dev: struct device
4700 * @attr: attribute structure
4701 * @buf: buffer to return formatted data in
4702 */
4703static ssize_t write_cnt_show(struct device *dev,
4704 struct device_attribute *attr, char *buf)
4705{
4706 struct st_modedef *STm = dev_get_drvdata(dev);
4707
4708 return sprintf(buf, "%lld",
4709 (long long)atomic64_read(&STm->tape->stats->write_cnt));
4710}
4711static DEVICE_ATTR_RO(write_cnt);
4712
4713/**
4714 * write_byte_cnt_show - write byte count - raw count of
4715 * bytes written to tape.
4716 * @dev: struct device
4717 * @attr: attribute structure
4718 * @buf: buffer to return formatted data in
4719 */
4720static ssize_t write_byte_cnt_show(struct device *dev,
4721 struct device_attribute *attr, char *buf)
4722{
4723 struct st_modedef *STm = dev_get_drvdata(dev);
4724
4725 return sprintf(buf, "%lld",
4726 (long long)atomic64_read(&STm->tape->stats->write_byte_cnt));
4727}
4728static DEVICE_ATTR_RO(write_byte_cnt);
4729
4730/**
4731 * write_ns_show - write ns - number of nanoseconds waiting on write
4732 * requests to complete.
4733 * @dev: struct device
4734 * @attr: attribute structure
4735 * @buf: buffer to return formatted data in
4736 */
4737static ssize_t write_ns_show(struct device *dev,
4738 struct device_attribute *attr, char *buf)
4739{
4740 struct st_modedef *STm = dev_get_drvdata(dev);
4741
4742 return sprintf(buf, "%lld",
4743 (long long)atomic64_read(&STm->tape->stats->tot_write_time));
4744}
4745static DEVICE_ATTR_RO(write_ns);
4746
4747/**
4748 * in_flight_show - number of I/Os currently in flight -
4749 * in most cases this will be either 0 or 1. It may be higher if someone
4750 * has also issued other SCSI commands such as via an ioctl.
4751 * @dev: struct device
4752 * @attr: attribute structure
4753 * @buf: buffer to return formatted data in
4754 */
4755static ssize_t in_flight_show(struct device *dev,
4756 struct device_attribute *attr, char *buf)
4757{
4758 struct st_modedef *STm = dev_get_drvdata(dev);
4759
4760 return sprintf(buf, "%lld",
4761 (long long)atomic64_read(&STm->tape->stats->in_flight));
4762}
4763static DEVICE_ATTR_RO(in_flight);
4764
4765/**
4766 * io_ns_show - io wait ns - this is the number of ns spent
4767 * waiting on all I/O to complete. This includes tape movement commands
4768 * such as rewinding, seeking to end of file or tape, it also includes
4769 * read and write. To determine the time spent on tape movement
4770 * subtract the read and write ns from this value.
4771 * @dev: struct device
4772 * @attr: attribute structure
4773 * @buf: buffer to return formatted data in
4774 */
4775static ssize_t io_ns_show(struct device *dev,
4776 struct device_attribute *attr, char *buf)
4777{
4778 struct st_modedef *STm = dev_get_drvdata(dev);
4779
4780 return sprintf(buf, "%lld",
4781 (long long)atomic64_read(&STm->tape->stats->tot_io_time));
4782}
4783static DEVICE_ATTR_RO(io_ns);
4784
4785/**
4786 * other_cnt_show - other io count - this is the number of
4787 * I/O requests other than read and write requests.
4788 * Typically these are tape movement requests but will include driver
4789 * tape movement. This includes only requests issued by the st driver.
4790 * @dev: struct device
4791 * @attr: attribute structure
4792 * @buf: buffer to return formatted data in
4793 */
4794static ssize_t other_cnt_show(struct device *dev,
4795 struct device_attribute *attr, char *buf)
4796{
4797 struct st_modedef *STm = dev_get_drvdata(dev);
4798
4799 return sprintf(buf, "%lld",
4800 (long long)atomic64_read(&STm->tape->stats->other_cnt));
4801}
4802static DEVICE_ATTR_RO(other_cnt);
4803
4804/**
4805 * resid_cnt_show - A count of the number of times we get a residual
4806 * count - this should indicate someone issuing reads larger than the
4807 * block size on tape.
4808 * @dev: struct device
4809 * @attr: attribute structure
4810 * @buf: buffer to return formatted data in
4811 */
4812static ssize_t resid_cnt_show(struct device *dev,
4813 struct device_attribute *attr, char *buf)
4814{
4815 struct st_modedef *STm = dev_get_drvdata(dev);
4816
4817 return sprintf(buf, "%lld",
4818 (long long)atomic64_read(&STm->tape->stats->resid_cnt));
4819}
4820static DEVICE_ATTR_RO(resid_cnt);
4821
4822static struct attribute *st_dev_attrs[] = {
4823 &dev_attr_defined.attr,
4824 &dev_attr_default_blksize.attr,
4825 &dev_attr_default_density.attr,
4826 &dev_attr_default_compression.attr,
4827 &dev_attr_options.attr,
4828 NULL,
4829};
4830
4831static struct attribute *st_stats_attrs[] = {
4832 &dev_attr_read_cnt.attr,
4833 &dev_attr_read_byte_cnt.attr,
4834 &dev_attr_read_ns.attr,
4835 &dev_attr_write_cnt.attr,
4836 &dev_attr_write_byte_cnt.attr,
4837 &dev_attr_write_ns.attr,
4838 &dev_attr_in_flight.attr,
4839 &dev_attr_io_ns.attr,
4840 &dev_attr_other_cnt.attr,
4841 &dev_attr_resid_cnt.attr,
4842 NULL,
4843};
4844
4845static struct attribute_group stats_group = {
4846 .name = "stats",
4847 .attrs = st_stats_attrs,
4848};
4849
4850static struct attribute_group st_group = {
4851 .attrs = st_dev_attrs,
4852};
4853
4854static const struct attribute_group *st_dev_groups[] = {
4855 &st_group,
4856 &stats_group,
4857 NULL,
4858};
4859
4860/* The following functions may be useful for a larger audience. */
4861static int sgl_map_user_pages(struct st_buffer *STbp,
4862 const unsigned int max_pages, unsigned long uaddr,
4863 size_t count, int rw)
4864{
4865 unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
4866 unsigned long start = uaddr >> PAGE_SHIFT;
4867 const int nr_pages = end - start;
4868 int res, i;
4869 struct page **pages;
4870 struct rq_map_data *mdata = &STbp->map_data;
4871
4872 /* User attempted Overflow! */
4873 if ((uaddr + count) < uaddr)
4874 return -EINVAL;
4875
4876 /* Too big */
4877 if (nr_pages > max_pages)
4878 return -ENOMEM;
4879
4880 /* Hmm? */
4881 if (count == 0)
4882 return 0;
4883
4884 pages = kmalloc_array(max_pages, sizeof(*pages), GFP_KERNEL);
4885 if (pages == NULL)
4886 return -ENOMEM;
4887
4888 /* Try to fault in all of the necessary pages */
4889 /* rw==READ means read from drive, write into memory area */
4890 res = pin_user_pages_fast(uaddr, nr_pages, rw == READ ? FOLL_WRITE : 0,
4891 pages);
4892
4893 /* Errors and no page mapped should return here */
4894 if (res < nr_pages)
4895 goto out_unmap;
4896
4897 for (i=0; i < nr_pages; i++) {
4898 /* FIXME: flush superflous for rw==READ,
4899 * probably wrong function for rw==WRITE
4900 */
4901 flush_dcache_page(pages[i]);
4902 }
4903
4904 mdata->offset = uaddr & ~PAGE_MASK;
4905 STbp->mapped_pages = pages;
4906
4907 return nr_pages;
4908 out_unmap:
4909 if (res > 0) {
4910 unpin_user_pages(pages, res);
4911 res = 0;
4912 }
4913 kfree(pages);
4914 return res;
4915}
4916
4917
4918/* And unmap them... */
4919static int sgl_unmap_user_pages(struct st_buffer *STbp,
4920 const unsigned int nr_pages, int dirtied)
4921{
4922 /* FIXME: cache flush missing for rw==READ */
4923 unpin_user_pages_dirty_lock(STbp->mapped_pages, nr_pages, dirtied);
4924
4925 kfree(STbp->mapped_pages);
4926 STbp->mapped_pages = NULL;
4927
4928 return 0;
4929}