Loading...
1/*
2 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
3 file Documentation/scsi/st.txt for more information.
4
5 History:
6 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
7 Contribution and ideas from several people including (in alphabetical
8 order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk,
9 Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
10 Michael Schaefer, J"org Weule, and Eric Youngdale.
11
12 Copyright 1992 - 2010 Kai Makisara
13 email Kai.Makisara@kolumbus.fi
14
15 Some small formal changes - aeb, 950809
16
17 Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
18 */
19
20static const char *verstr = "20101219";
21
22#include <linux/module.h>
23
24#include <linux/fs.h>
25#include <linux/kernel.h>
26#include <linux/sched.h>
27#include <linux/mm.h>
28#include <linux/init.h>
29#include <linux/string.h>
30#include <linux/slab.h>
31#include <linux/errno.h>
32#include <linux/mtio.h>
33#include <linux/cdrom.h>
34#include <linux/ioctl.h>
35#include <linux/fcntl.h>
36#include <linux/spinlock.h>
37#include <linux/blkdev.h>
38#include <linux/moduleparam.h>
39#include <linux/cdev.h>
40#include <linux/delay.h>
41#include <linux/mutex.h>
42
43#include <asm/uaccess.h>
44#include <asm/dma.h>
45#include <asm/system.h>
46
47#include <scsi/scsi.h>
48#include <scsi/scsi_dbg.h>
49#include <scsi/scsi_device.h>
50#include <scsi/scsi_driver.h>
51#include <scsi/scsi_eh.h>
52#include <scsi/scsi_host.h>
53#include <scsi/scsi_ioctl.h>
54#include <scsi/sg.h>
55
56
57/* The driver prints some debugging information on the console if DEBUG
58 is defined and non-zero. */
59#define DEBUG 0
60
61#if DEBUG
62/* The message level for the debug messages is currently set to KERN_NOTICE
63 so that people can easily see the messages. Later when the debugging messages
64 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
65#define ST_DEB_MSG KERN_NOTICE
66#define DEB(a) a
67#define DEBC(a) if (debugging) { a ; }
68#else
69#define DEB(a)
70#define DEBC(a)
71#endif
72
73#define ST_KILOBYTE 1024
74
75#include "st_options.h"
76#include "st.h"
77
78static DEFINE_MUTEX(st_mutex);
79static int buffer_kbs;
80static int max_sg_segs;
81static int try_direct_io = TRY_DIRECT_IO;
82static int try_rdio = 1;
83static int try_wdio = 1;
84
85static int st_dev_max;
86static int st_nr_dev;
87
88static struct class *st_sysfs_class;
89
90MODULE_AUTHOR("Kai Makisara");
91MODULE_DESCRIPTION("SCSI tape (st) driver");
92MODULE_LICENSE("GPL");
93MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
94MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
95
96/* Set 'perm' (4th argument) to 0 to disable module_param's definition
97 * of sysfs parameters (which module_param doesn't yet support).
98 * Sysfs parameters defined explicitly later.
99 */
100module_param_named(buffer_kbs, buffer_kbs, int, 0);
101MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)");
102module_param_named(max_sg_segs, max_sg_segs, int, 0);
103MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
104module_param_named(try_direct_io, try_direct_io, int, 0);
105MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
106
107/* Extra parameters for testing */
108module_param_named(try_rdio, try_rdio, int, 0);
109MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible");
110module_param_named(try_wdio, try_wdio, int, 0);
111MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible");
112
113#ifndef MODULE
114static int write_threshold_kbs; /* retained for compatibility */
115static struct st_dev_parm {
116 char *name;
117 int *val;
118} parms[] __initdata = {
119 {
120 "buffer_kbs", &buffer_kbs
121 },
122 { /* Retained for compatibility with 2.4 */
123 "write_threshold_kbs", &write_threshold_kbs
124 },
125 {
126 "max_sg_segs", NULL
127 },
128 {
129 "try_direct_io", &try_direct_io
130 }
131};
132#endif
133
134/* Restrict the number of modes so that names for all are assigned */
135#if ST_NBR_MODES > 16
136#error "Maximum number of modes is 16"
137#endif
138/* Bit reversed order to get same names for same minors with all
139 mode counts */
140static const char *st_formats[] = {
141 "", "r", "k", "s", "l", "t", "o", "u",
142 "m", "v", "p", "x", "a", "y", "q", "z"};
143
144/* The default definitions have been moved to st_options.h */
145
146#define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE)
147
148/* The buffer size should fit into the 24 bits for length in the
149 6-byte SCSI read and write commands. */
150#if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1)
151#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
152#endif
153
154static int debugging = DEBUG;
155
156#define MAX_RETRIES 0
157#define MAX_WRITE_RETRIES 0
158#define MAX_READY_RETRIES 0
159#define NO_TAPE NOT_READY
160
161#define ST_TIMEOUT (900 * HZ)
162#define ST_LONG_TIMEOUT (14000 * HZ)
163
164/* Remove mode bits and auto-rewind bit (7) */
165#define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \
166 (iminor(x) & ~(-1 << ST_MODE_SHIFT)) )
167#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
168
169/* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */
170#define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \
171 (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) )
172
173/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
174 24 bits) */
175#define SET_DENS_AND_BLK 0x10001
176
177static DEFINE_RWLOCK(st_dev_arr_lock);
178
179static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE;
180static int st_max_sg_segs = ST_MAX_SG;
181
182static struct scsi_tape **scsi_tapes = NULL;
183
184static int modes_defined;
185
186static int enlarge_buffer(struct st_buffer *, int, int);
187static void clear_buffer(struct st_buffer *);
188static void normalize_buffer(struct st_buffer *);
189static int append_to_buffer(const char __user *, struct st_buffer *, int);
190static int from_buffer(struct st_buffer *, char __user *, int);
191static void move_buffer_data(struct st_buffer *, int);
192
193static int sgl_map_user_pages(struct st_buffer *, const unsigned int,
194 unsigned long, size_t, int);
195static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int);
196
197static int st_probe(struct device *);
198static int st_remove(struct device *);
199
200static int do_create_sysfs_files(void);
201static void do_remove_sysfs_files(void);
202static int do_create_class_files(struct scsi_tape *, int, int);
203
204static struct scsi_driver st_template = {
205 .owner = THIS_MODULE,
206 .gendrv = {
207 .name = "st",
208 .probe = st_probe,
209 .remove = st_remove,
210 },
211};
212
213static int st_compression(struct scsi_tape *, int);
214
215static int find_partition(struct scsi_tape *);
216static int switch_partition(struct scsi_tape *);
217
218static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long);
219
220static void scsi_tape_release(struct kref *);
221
222#define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
223
224static DEFINE_MUTEX(st_ref_mutex);
225
226
227#include "osst_detect.h"
228#ifndef SIGS_FROM_OSST
229#define SIGS_FROM_OSST \
230 {"OnStream", "SC-", "", "osst"}, \
231 {"OnStream", "DI-", "", "osst"}, \
232 {"OnStream", "DP-", "", "osst"}, \
233 {"OnStream", "USB", "", "osst"}, \
234 {"OnStream", "FW-", "", "osst"}
235#endif
236
237static struct scsi_tape *scsi_tape_get(int dev)
238{
239 struct scsi_tape *STp = NULL;
240
241 mutex_lock(&st_ref_mutex);
242 write_lock(&st_dev_arr_lock);
243
244 if (dev < st_dev_max && scsi_tapes != NULL)
245 STp = scsi_tapes[dev];
246 if (!STp) goto out;
247
248 kref_get(&STp->kref);
249
250 if (!STp->device)
251 goto out_put;
252
253 if (scsi_device_get(STp->device))
254 goto out_put;
255
256 goto out;
257
258out_put:
259 kref_put(&STp->kref, scsi_tape_release);
260 STp = NULL;
261out:
262 write_unlock(&st_dev_arr_lock);
263 mutex_unlock(&st_ref_mutex);
264 return STp;
265}
266
267static void scsi_tape_put(struct scsi_tape *STp)
268{
269 struct scsi_device *sdev = STp->device;
270
271 mutex_lock(&st_ref_mutex);
272 kref_put(&STp->kref, scsi_tape_release);
273 scsi_device_put(sdev);
274 mutex_unlock(&st_ref_mutex);
275}
276
277struct st_reject_data {
278 char *vendor;
279 char *model;
280 char *rev;
281 char *driver_hint; /* Name of the correct driver, NULL if unknown */
282};
283
284static struct st_reject_data reject_list[] = {
285 /* {"XXX", "Yy-", "", NULL}, example */
286 SIGS_FROM_OSST,
287 {NULL, }};
288
289/* If the device signature is on the list of incompatible drives, the
290 function returns a pointer to the name of the correct driver (if known) */
291static char * st_incompatible(struct scsi_device* SDp)
292{
293 struct st_reject_data *rp;
294
295 for (rp=&(reject_list[0]); rp->vendor != NULL; rp++)
296 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
297 !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
298 !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) {
299 if (rp->driver_hint)
300 return rp->driver_hint;
301 else
302 return "unknown";
303 }
304 return NULL;
305}
306
307
308static inline char *tape_name(struct scsi_tape *tape)
309{
310 return tape->disk->disk_name;
311}
312
313
314static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s)
315{
316 const u8 *ucp;
317 const u8 *sense = SRpnt->sense;
318
319 s->have_sense = scsi_normalize_sense(SRpnt->sense,
320 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
321 s->flags = 0;
322
323 if (s->have_sense) {
324 s->deferred = 0;
325 s->remainder_valid =
326 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
327 switch (sense[0] & 0x7f) {
328 case 0x71:
329 s->deferred = 1;
330 case 0x70:
331 s->fixed_format = 1;
332 s->flags = sense[2] & 0xe0;
333 break;
334 case 0x73:
335 s->deferred = 1;
336 case 0x72:
337 s->fixed_format = 0;
338 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
339 s->flags = ucp ? (ucp[3] & 0xe0) : 0;
340 break;
341 }
342 }
343}
344
345
346/* Convert the result to success code */
347static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
348{
349 int result = SRpnt->result;
350 u8 scode;
351 DEB(const char *stp;)
352 char *name = tape_name(STp);
353 struct st_cmdstatus *cmdstatp;
354
355 if (!result)
356 return 0;
357
358 cmdstatp = &STp->buffer->cmdstat;
359 st_analyze_sense(SRpnt, cmdstatp);
360
361 if (cmdstatp->have_sense)
362 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
363 else
364 scode = 0;
365
366 DEB(
367 if (debugging) {
368 printk(ST_DEB_MSG "%s: Error: %x, cmd: %x %x %x %x %x %x\n",
369 name, result,
370 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
371 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
372 if (cmdstatp->have_sense)
373 __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
374 } ) /* end DEB */
375 if (!debugging) { /* Abnormal conditions for tape */
376 if (!cmdstatp->have_sense)
377 printk(KERN_WARNING
378 "%s: Error %x (driver bt 0x%x, host bt 0x%x).\n",
379 name, result, driver_byte(result),
380 host_byte(result));
381 else if (cmdstatp->have_sense &&
382 scode != NO_SENSE &&
383 scode != RECOVERED_ERROR &&
384 /* scode != UNIT_ATTENTION && */
385 scode != BLANK_CHECK &&
386 scode != VOLUME_OVERFLOW &&
387 SRpnt->cmd[0] != MODE_SENSE &&
388 SRpnt->cmd[0] != TEST_UNIT_READY) {
389
390 __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
391 }
392 }
393
394 if (cmdstatp->fixed_format &&
395 STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */
396 if (STp->cln_sense_value)
397 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
398 STp->cln_sense_mask) == STp->cln_sense_value);
399 else
400 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
401 STp->cln_sense_mask) != 0);
402 }
403 if (cmdstatp->have_sense &&
404 cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17)
405 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */
406
407 STp->pos_unknown |= STp->device->was_reset;
408
409 if (cmdstatp->have_sense &&
410 scode == RECOVERED_ERROR
411#if ST_RECOVERED_WRITE_FATAL
412 && SRpnt->cmd[0] != WRITE_6
413 && SRpnt->cmd[0] != WRITE_FILEMARKS
414#endif
415 ) {
416 STp->recover_count++;
417 STp->recover_reg++;
418
419 DEB(
420 if (debugging) {
421 if (SRpnt->cmd[0] == READ_6)
422 stp = "read";
423 else if (SRpnt->cmd[0] == WRITE_6)
424 stp = "write";
425 else
426 stp = "ioctl";
427 printk(ST_DEB_MSG "%s: Recovered %s error (%d).\n", name, stp,
428 STp->recover_count);
429 } ) /* end DEB */
430
431 if (cmdstatp->flags == 0)
432 return 0;
433 }
434 return (-EIO);
435}
436
437static struct st_request *st_allocate_request(struct scsi_tape *stp)
438{
439 struct st_request *streq;
440
441 streq = kzalloc(sizeof(*streq), GFP_KERNEL);
442 if (streq)
443 streq->stp = stp;
444 else {
445 DEBC(printk(KERN_ERR "%s: Can't get SCSI request.\n",
446 tape_name(stp)););
447 if (signal_pending(current))
448 stp->buffer->syscall_result = -EINTR;
449 else
450 stp->buffer->syscall_result = -EBUSY;
451 }
452
453 return streq;
454}
455
456static void st_release_request(struct st_request *streq)
457{
458 kfree(streq);
459}
460
461static void st_scsi_execute_end(struct request *req, int uptodate)
462{
463 struct st_request *SRpnt = req->end_io_data;
464 struct scsi_tape *STp = SRpnt->stp;
465
466 STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
467 STp->buffer->cmdstat.residual = req->resid_len;
468
469 if (SRpnt->waiting)
470 complete(SRpnt->waiting);
471
472 blk_rq_unmap_user(SRpnt->bio);
473 __blk_put_request(req->q, req);
474}
475
476static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd,
477 int data_direction, void *buffer, unsigned bufflen,
478 int timeout, int retries)
479{
480 struct request *req;
481 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
482 int err = 0;
483 int write = (data_direction == DMA_TO_DEVICE);
484
485 req = blk_get_request(SRpnt->stp->device->request_queue, write,
486 GFP_KERNEL);
487 if (!req)
488 return DRIVER_ERROR << 24;
489
490 req->cmd_type = REQ_TYPE_BLOCK_PC;
491 req->cmd_flags |= REQ_QUIET;
492
493 mdata->null_mapped = 1;
494
495 if (bufflen) {
496 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen,
497 GFP_KERNEL);
498 if (err) {
499 blk_put_request(req);
500 return DRIVER_ERROR << 24;
501 }
502 }
503
504 SRpnt->bio = req->bio;
505 req->cmd_len = COMMAND_SIZE(cmd[0]);
506 memset(req->cmd, 0, BLK_MAX_CDB);
507 memcpy(req->cmd, cmd, req->cmd_len);
508 req->sense = SRpnt->sense;
509 req->sense_len = 0;
510 req->timeout = timeout;
511 req->retries = retries;
512 req->end_io_data = SRpnt;
513
514 blk_execute_rq_nowait(req->q, NULL, req, 1, st_scsi_execute_end);
515 return 0;
516}
517
518/* Do the scsi command. Waits until command performed if do_wait is true.
519 Otherwise write_behind_check() is used to check that the command
520 has finished. */
521static struct st_request *
522st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd,
523 int bytes, int direction, int timeout, int retries, int do_wait)
524{
525 struct completion *waiting;
526 struct rq_map_data *mdata = &STp->buffer->map_data;
527 int ret;
528
529 /* if async, make sure there's no command outstanding */
530 if (!do_wait && ((STp->buffer)->last_SRpnt)) {
531 printk(KERN_ERR "%s: Async command already active.\n",
532 tape_name(STp));
533 if (signal_pending(current))
534 (STp->buffer)->syscall_result = (-EINTR);
535 else
536 (STp->buffer)->syscall_result = (-EBUSY);
537 return NULL;
538 }
539
540 if (!SRpnt) {
541 SRpnt = st_allocate_request(STp);
542 if (!SRpnt)
543 return NULL;
544 }
545
546 /* If async IO, set last_SRpnt. This ptr tells write_behind_check
547 which IO is outstanding. It's nulled out when the IO completes. */
548 if (!do_wait)
549 (STp->buffer)->last_SRpnt = SRpnt;
550
551 waiting = &STp->wait;
552 init_completion(waiting);
553 SRpnt->waiting = waiting;
554
555 if (STp->buffer->do_dio) {
556 mdata->page_order = 0;
557 mdata->nr_entries = STp->buffer->sg_segs;
558 mdata->pages = STp->buffer->mapped_pages;
559 } else {
560 mdata->page_order = STp->buffer->reserved_page_order;
561 mdata->nr_entries =
562 DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
563 mdata->pages = STp->buffer->reserved_pages;
564 mdata->offset = 0;
565 }
566
567 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
568 STp->buffer->cmdstat.have_sense = 0;
569 STp->buffer->syscall_result = 0;
570
571 ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout,
572 retries);
573 if (ret) {
574 /* could not allocate the buffer or request was too large */
575 (STp->buffer)->syscall_result = (-EBUSY);
576 (STp->buffer)->last_SRpnt = NULL;
577 } else if (do_wait) {
578 wait_for_completion(waiting);
579 SRpnt->waiting = NULL;
580 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
581 }
582
583 return SRpnt;
584}
585
586
587/* Handle the write-behind checking (waits for completion). Returns -ENOSPC if
588 write has been correct but EOM early warning reached, -EIO if write ended in
589 error or zero if write successful. Asynchronous writes are used only in
590 variable block mode. */
591static int write_behind_check(struct scsi_tape * STp)
592{
593 int retval = 0;
594 struct st_buffer *STbuffer;
595 struct st_partstat *STps;
596 struct st_cmdstatus *cmdstatp;
597 struct st_request *SRpnt;
598
599 STbuffer = STp->buffer;
600 if (!STbuffer->writing)
601 return 0;
602
603 DEB(
604 if (STp->write_pending)
605 STp->nbr_waits++;
606 else
607 STp->nbr_finished++;
608 ) /* end DEB */
609
610 wait_for_completion(&(STp->wait));
611 SRpnt = STbuffer->last_SRpnt;
612 STbuffer->last_SRpnt = NULL;
613 SRpnt->waiting = NULL;
614
615 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
616 st_release_request(SRpnt);
617
618 STbuffer->buffer_bytes -= STbuffer->writing;
619 STps = &(STp->ps[STp->partition]);
620 if (STps->drv_block >= 0) {
621 if (STp->block_size == 0)
622 STps->drv_block++;
623 else
624 STps->drv_block += STbuffer->writing / STp->block_size;
625 }
626
627 cmdstatp = &STbuffer->cmdstat;
628 if (STbuffer->syscall_result) {
629 retval = -EIO;
630 if (cmdstatp->have_sense && !cmdstatp->deferred &&
631 (cmdstatp->flags & SENSE_EOM) &&
632 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
633 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) {
634 /* EOM at write-behind, has all data been written? */
635 if (!cmdstatp->remainder_valid ||
636 cmdstatp->uremainder64 == 0)
637 retval = -ENOSPC;
638 }
639 if (retval == -EIO)
640 STps->drv_block = -1;
641 }
642 STbuffer->writing = 0;
643
644 DEB(if (debugging && retval)
645 printk(ST_DEB_MSG "%s: Async write error %x, return value %d.\n",
646 tape_name(STp), STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */
647
648 return retval;
649}
650
651
652/* Step over EOF if it has been inadvertently crossed (ioctl not used because
653 it messes up the block number). */
654static int cross_eof(struct scsi_tape * STp, int forward)
655{
656 struct st_request *SRpnt;
657 unsigned char cmd[MAX_COMMAND_SIZE];
658
659 cmd[0] = SPACE;
660 cmd[1] = 0x01; /* Space FileMarks */
661 if (forward) {
662 cmd[2] = cmd[3] = 0;
663 cmd[4] = 1;
664 } else
665 cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */
666 cmd[5] = 0;
667
668 DEBC(printk(ST_DEB_MSG "%s: Stepping over filemark %s.\n",
669 tape_name(STp), forward ? "forward" : "backward"));
670
671 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
672 STp->device->request_queue->rq_timeout,
673 MAX_RETRIES, 1);
674 if (!SRpnt)
675 return (STp->buffer)->syscall_result;
676
677 st_release_request(SRpnt);
678 SRpnt = NULL;
679
680 if ((STp->buffer)->cmdstat.midlevel_result != 0)
681 printk(KERN_ERR "%s: Stepping over filemark %s failed.\n",
682 tape_name(STp), forward ? "forward" : "backward");
683
684 return (STp->buffer)->syscall_result;
685}
686
687
688/* Flush the write buffer (never need to write if variable blocksize). */
689static int st_flush_write_buffer(struct scsi_tape * STp)
690{
691 int transfer, blks;
692 int result;
693 unsigned char cmd[MAX_COMMAND_SIZE];
694 struct st_request *SRpnt;
695 struct st_partstat *STps;
696
697 result = write_behind_check(STp);
698 if (result)
699 return result;
700
701 result = 0;
702 if (STp->dirty == 1) {
703
704 transfer = STp->buffer->buffer_bytes;
705 DEBC(printk(ST_DEB_MSG "%s: Flushing %d bytes.\n",
706 tape_name(STp), transfer));
707
708 memset(cmd, 0, MAX_COMMAND_SIZE);
709 cmd[0] = WRITE_6;
710 cmd[1] = 1;
711 blks = transfer / STp->block_size;
712 cmd[2] = blks >> 16;
713 cmd[3] = blks >> 8;
714 cmd[4] = blks;
715
716 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE,
717 STp->device->request_queue->rq_timeout,
718 MAX_WRITE_RETRIES, 1);
719 if (!SRpnt)
720 return (STp->buffer)->syscall_result;
721
722 STps = &(STp->ps[STp->partition]);
723 if ((STp->buffer)->syscall_result != 0) {
724 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
725
726 if (cmdstatp->have_sense && !cmdstatp->deferred &&
727 (cmdstatp->flags & SENSE_EOM) &&
728 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
729 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
730 (!cmdstatp->remainder_valid ||
731 cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */
732 STp->dirty = 0;
733 (STp->buffer)->buffer_bytes = 0;
734 if (STps->drv_block >= 0)
735 STps->drv_block += blks;
736 result = (-ENOSPC);
737 } else {
738 printk(KERN_ERR "%s: Error on flush.\n",
739 tape_name(STp));
740 STps->drv_block = (-1);
741 result = (-EIO);
742 }
743 } else {
744 if (STps->drv_block >= 0)
745 STps->drv_block += blks;
746 STp->dirty = 0;
747 (STp->buffer)->buffer_bytes = 0;
748 }
749 st_release_request(SRpnt);
750 SRpnt = NULL;
751 }
752 return result;
753}
754
755
756/* Flush the tape buffer. The tape will be positioned correctly unless
757 seek_next is true. */
758static int flush_buffer(struct scsi_tape *STp, int seek_next)
759{
760 int backspace, result;
761 struct st_buffer *STbuffer;
762 struct st_partstat *STps;
763
764 STbuffer = STp->buffer;
765
766 /*
767 * If there was a bus reset, block further access
768 * to this device.
769 */
770 if (STp->pos_unknown)
771 return (-EIO);
772
773 if (STp->ready != ST_READY)
774 return 0;
775 STps = &(STp->ps[STp->partition]);
776 if (STps->rw == ST_WRITING) /* Writing */
777 return st_flush_write_buffer(STp);
778
779 if (STp->block_size == 0)
780 return 0;
781
782 backspace = ((STp->buffer)->buffer_bytes +
783 (STp->buffer)->read_pointer) / STp->block_size -
784 ((STp->buffer)->read_pointer + STp->block_size - 1) /
785 STp->block_size;
786 (STp->buffer)->buffer_bytes = 0;
787 (STp->buffer)->read_pointer = 0;
788 result = 0;
789 if (!seek_next) {
790 if (STps->eof == ST_FM_HIT) {
791 result = cross_eof(STp, 0); /* Back over the EOF hit */
792 if (!result)
793 STps->eof = ST_NOEOF;
794 else {
795 if (STps->drv_file >= 0)
796 STps->drv_file++;
797 STps->drv_block = 0;
798 }
799 }
800 if (!result && backspace > 0)
801 result = st_int_ioctl(STp, MTBSR, backspace);
802 } else if (STps->eof == ST_FM_HIT) {
803 if (STps->drv_file >= 0)
804 STps->drv_file++;
805 STps->drv_block = 0;
806 STps->eof = ST_NOEOF;
807 }
808 return result;
809
810}
811
812/* Set the mode parameters */
813static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm)
814{
815 int set_it = 0;
816 unsigned long arg;
817 char *name = tape_name(STp);
818
819 if (!STp->density_changed &&
820 STm->default_density >= 0 &&
821 STm->default_density != STp->density) {
822 arg = STm->default_density;
823 set_it = 1;
824 } else
825 arg = STp->density;
826 arg <<= MT_ST_DENSITY_SHIFT;
827 if (!STp->blksize_changed &&
828 STm->default_blksize >= 0 &&
829 STm->default_blksize != STp->block_size) {
830 arg |= STm->default_blksize;
831 set_it = 1;
832 } else
833 arg |= STp->block_size;
834 if (set_it &&
835 st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) {
836 printk(KERN_WARNING
837 "%s: Can't set default block size to %d bytes and density %x.\n",
838 name, STm->default_blksize, STm->default_density);
839 if (modes_defined)
840 return (-EINVAL);
841 }
842 return 0;
843}
844
845
846/* Lock or unlock the drive door. Don't use when st_request allocated. */
847static int do_door_lock(struct scsi_tape * STp, int do_lock)
848{
849 int retval, cmd;
850 DEB(char *name = tape_name(STp);)
851
852
853 cmd = do_lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK;
854 DEBC(printk(ST_DEB_MSG "%s: %socking drive door.\n", name,
855 do_lock ? "L" : "Unl"));
856 retval = scsi_ioctl(STp->device, cmd, NULL);
857 if (!retval) {
858 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
859 }
860 else {
861 STp->door_locked = ST_LOCK_FAILS;
862 }
863 return retval;
864}
865
866
867/* Set the internal state after reset */
868static void reset_state(struct scsi_tape *STp)
869{
870 int i;
871 struct st_partstat *STps;
872
873 STp->pos_unknown = 0;
874 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
875 STps = &(STp->ps[i]);
876 STps->rw = ST_IDLE;
877 STps->eof = ST_NOEOF;
878 STps->at_sm = 0;
879 STps->last_block_valid = 0;
880 STps->drv_block = -1;
881 STps->drv_file = -1;
882 }
883 if (STp->can_partitions) {
884 STp->partition = find_partition(STp);
885 if (STp->partition < 0)
886 STp->partition = 0;
887 STp->new_partition = STp->partition;
888 }
889}
890
891/* Test if the drive is ready. Returns either one of the codes below or a negative system
892 error code. */
893#define CHKRES_READY 0
894#define CHKRES_NEW_SESSION 1
895#define CHKRES_NOT_READY 2
896#define CHKRES_NO_TAPE 3
897
898#define MAX_ATTENTIONS 10
899
900static int test_ready(struct scsi_tape *STp, int do_wait)
901{
902 int attentions, waits, max_wait, scode;
903 int retval = CHKRES_READY, new_session = 0;
904 unsigned char cmd[MAX_COMMAND_SIZE];
905 struct st_request *SRpnt = NULL;
906 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
907
908 max_wait = do_wait ? ST_BLOCK_SECONDS : 0;
909
910 for (attentions=waits=0; ; ) {
911 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
912 cmd[0] = TEST_UNIT_READY;
913 SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
914 STp->long_timeout, MAX_READY_RETRIES, 1);
915
916 if (!SRpnt) {
917 retval = (STp->buffer)->syscall_result;
918 break;
919 }
920
921 if (cmdstatp->have_sense) {
922
923 scode = cmdstatp->sense_hdr.sense_key;
924
925 if (scode == UNIT_ATTENTION) { /* New media? */
926 new_session = 1;
927 if (attentions < MAX_ATTENTIONS) {
928 attentions++;
929 continue;
930 }
931 else {
932 retval = (-EIO);
933 break;
934 }
935 }
936
937 if (scode == NOT_READY) {
938 if (waits < max_wait) {
939 if (msleep_interruptible(1000)) {
940 retval = (-EINTR);
941 break;
942 }
943 waits++;
944 continue;
945 }
946 else {
947 if ((STp->device)->scsi_level >= SCSI_2 &&
948 cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */
949 retval = CHKRES_NO_TAPE;
950 else
951 retval = CHKRES_NOT_READY;
952 break;
953 }
954 }
955 }
956
957 retval = (STp->buffer)->syscall_result;
958 if (!retval)
959 retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY;
960 break;
961 }
962
963 if (SRpnt != NULL)
964 st_release_request(SRpnt);
965 return retval;
966}
967
968
969/* See if the drive is ready and gather information about the tape. Return values:
970 < 0 negative error code from errno.h
971 0 drive ready
972 1 drive not ready (possibly no tape)
973*/
974static int check_tape(struct scsi_tape *STp, struct file *filp)
975{
976 int i, retval, new_session = 0, do_wait;
977 unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning;
978 unsigned short st_flags = filp->f_flags;
979 struct st_request *SRpnt = NULL;
980 struct st_modedef *STm;
981 struct st_partstat *STps;
982 char *name = tape_name(STp);
983 struct inode *inode = filp->f_path.dentry->d_inode;
984 int mode = TAPE_MODE(inode);
985
986 STp->ready = ST_READY;
987
988 if (mode != STp->current_mode) {
989 DEBC(printk(ST_DEB_MSG "%s: Mode change from %d to %d.\n",
990 name, STp->current_mode, mode));
991 new_session = 1;
992 STp->current_mode = mode;
993 }
994 STm = &(STp->modes[STp->current_mode]);
995
996 saved_cleaning = STp->cleaning_req;
997 STp->cleaning_req = 0;
998
999 do_wait = ((filp->f_flags & O_NONBLOCK) == 0);
1000 retval = test_ready(STp, do_wait);
1001
1002 if (retval < 0)
1003 goto err_out;
1004
1005 if (retval == CHKRES_NEW_SESSION) {
1006 STp->pos_unknown = 0;
1007 STp->partition = STp->new_partition = 0;
1008 if (STp->can_partitions)
1009 STp->nbr_partitions = 1; /* This guess will be updated later
1010 if necessary */
1011 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1012 STps = &(STp->ps[i]);
1013 STps->rw = ST_IDLE;
1014 STps->eof = ST_NOEOF;
1015 STps->at_sm = 0;
1016 STps->last_block_valid = 0;
1017 STps->drv_block = 0;
1018 STps->drv_file = 0;
1019 }
1020 new_session = 1;
1021 }
1022 else {
1023 STp->cleaning_req |= saved_cleaning;
1024
1025 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) {
1026 if (retval == CHKRES_NO_TAPE)
1027 STp->ready = ST_NO_TAPE;
1028 else
1029 STp->ready = ST_NOT_READY;
1030
1031 STp->density = 0; /* Clear the erroneous "residue" */
1032 STp->write_prot = 0;
1033 STp->block_size = 0;
1034 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
1035 STp->partition = STp->new_partition = 0;
1036 STp->door_locked = ST_UNLOCKED;
1037 return CHKRES_NOT_READY;
1038 }
1039 }
1040
1041 if (STp->omit_blklims)
1042 STp->min_block = STp->max_block = (-1);
1043 else {
1044 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1045 cmd[0] = READ_BLOCK_LIMITS;
1046
1047 SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE,
1048 STp->device->request_queue->rq_timeout,
1049 MAX_READY_RETRIES, 1);
1050 if (!SRpnt) {
1051 retval = (STp->buffer)->syscall_result;
1052 goto err_out;
1053 }
1054
1055 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) {
1056 STp->max_block = ((STp->buffer)->b_data[1] << 16) |
1057 ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3];
1058 STp->min_block = ((STp->buffer)->b_data[4] << 8) |
1059 (STp->buffer)->b_data[5];
1060 if ( DEB( debugging || ) !STp->inited)
1061 printk(KERN_INFO
1062 "%s: Block limits %d - %d bytes.\n", name,
1063 STp->min_block, STp->max_block);
1064 } else {
1065 STp->min_block = STp->max_block = (-1);
1066 DEBC(printk(ST_DEB_MSG "%s: Can't read block limits.\n",
1067 name));
1068 }
1069 }
1070
1071 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1072 cmd[0] = MODE_SENSE;
1073 cmd[4] = 12;
1074
1075 SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE,
1076 STp->device->request_queue->rq_timeout,
1077 MAX_READY_RETRIES, 1);
1078 if (!SRpnt) {
1079 retval = (STp->buffer)->syscall_result;
1080 goto err_out;
1081 }
1082
1083 if ((STp->buffer)->syscall_result != 0) {
1084 DEBC(printk(ST_DEB_MSG "%s: No Mode Sense.\n", name));
1085 STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */
1086 (STp->buffer)->syscall_result = 0; /* Prevent error propagation */
1087 STp->drv_write_prot = 0;
1088 } else {
1089 DEBC(printk(ST_DEB_MSG
1090 "%s: Mode sense. Length %d, medium %x, WBS %x, BLL %d\n",
1091 name,
1092 (STp->buffer)->b_data[0], (STp->buffer)->b_data[1],
1093 (STp->buffer)->b_data[2], (STp->buffer)->b_data[3]));
1094
1095 if ((STp->buffer)->b_data[3] >= 8) {
1096 STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7;
1097 STp->density = (STp->buffer)->b_data[4];
1098 STp->block_size = (STp->buffer)->b_data[9] * 65536 +
1099 (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11];
1100 DEBC(printk(ST_DEB_MSG
1101 "%s: Density %x, tape length: %x, drv buffer: %d\n",
1102 name, STp->density, (STp->buffer)->b_data[5] * 65536 +
1103 (STp->buffer)->b_data[6] * 256 + (STp->buffer)->b_data[7],
1104 STp->drv_buffer));
1105 }
1106 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
1107 }
1108 st_release_request(SRpnt);
1109 SRpnt = NULL;
1110 STp->inited = 1;
1111
1112 if (STp->block_size > 0)
1113 (STp->buffer)->buffer_blocks =
1114 (STp->buffer)->buffer_size / STp->block_size;
1115 else
1116 (STp->buffer)->buffer_blocks = 1;
1117 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
1118
1119 DEBC(printk(ST_DEB_MSG
1120 "%s: Block size: %d, buffer size: %d (%d blocks).\n", name,
1121 STp->block_size, (STp->buffer)->buffer_size,
1122 (STp->buffer)->buffer_blocks));
1123
1124 if (STp->drv_write_prot) {
1125 STp->write_prot = 1;
1126
1127 DEBC(printk(ST_DEB_MSG "%s: Write protected\n", name));
1128
1129 if (do_wait &&
1130 ((st_flags & O_ACCMODE) == O_WRONLY ||
1131 (st_flags & O_ACCMODE) == O_RDWR)) {
1132 retval = (-EROFS);
1133 goto err_out;
1134 }
1135 }
1136
1137 if (STp->can_partitions && STp->nbr_partitions < 1) {
1138 /* This code is reached when the device is opened for the first time
1139 after the driver has been initialized with tape in the drive and the
1140 partition support has been enabled. */
1141 DEBC(printk(ST_DEB_MSG
1142 "%s: Updating partition number in status.\n", name));
1143 if ((STp->partition = find_partition(STp)) < 0) {
1144 retval = STp->partition;
1145 goto err_out;
1146 }
1147 STp->new_partition = STp->partition;
1148 STp->nbr_partitions = 1; /* This guess will be updated when necessary */
1149 }
1150
1151 if (new_session) { /* Change the drive parameters for the new mode */
1152 STp->density_changed = STp->blksize_changed = 0;
1153 STp->compression_changed = 0;
1154 if (!(STm->defaults_for_writes) &&
1155 (retval = set_mode_densblk(STp, STm)) < 0)
1156 goto err_out;
1157
1158 if (STp->default_drvbuffer != 0xff) {
1159 if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer))
1160 printk(KERN_WARNING
1161 "%s: Can't set default drive buffering to %d.\n",
1162 name, STp->default_drvbuffer);
1163 }
1164 }
1165
1166 return CHKRES_READY;
1167
1168 err_out:
1169 return retval;
1170}
1171
1172
1173 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host
1174 module count. */
1175static int st_open(struct inode *inode, struct file *filp)
1176{
1177 int i, retval = (-EIO);
1178 struct scsi_tape *STp;
1179 struct st_partstat *STps;
1180 int dev = TAPE_NR(inode);
1181 char *name;
1182
1183 mutex_lock(&st_mutex);
1184 /*
1185 * We really want to do nonseekable_open(inode, filp); here, but some
1186 * versions of tar incorrectly call lseek on tapes and bail out if that
1187 * fails. So we disallow pread() and pwrite(), but permit lseeks.
1188 */
1189 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
1190
1191 if (!(STp = scsi_tape_get(dev))) {
1192 mutex_unlock(&st_mutex);
1193 return -ENXIO;
1194 }
1195
1196 write_lock(&st_dev_arr_lock);
1197 filp->private_data = STp;
1198 name = tape_name(STp);
1199
1200 if (STp->in_use) {
1201 write_unlock(&st_dev_arr_lock);
1202 scsi_tape_put(STp);
1203 mutex_unlock(&st_mutex);
1204 DEB( printk(ST_DEB_MSG "%s: Device already in use.\n", name); )
1205 return (-EBUSY);
1206 }
1207
1208 STp->in_use = 1;
1209 write_unlock(&st_dev_arr_lock);
1210 STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0;
1211
1212 if (!scsi_block_when_processing_errors(STp->device)) {
1213 retval = (-ENXIO);
1214 goto err_out;
1215 }
1216
1217 /* See that we have at least a one page buffer available */
1218 if (!enlarge_buffer(STp->buffer, PAGE_SIZE, STp->restr_dma)) {
1219 printk(KERN_WARNING "%s: Can't allocate one page tape buffer.\n",
1220 name);
1221 retval = (-EOVERFLOW);
1222 goto err_out;
1223 }
1224
1225 (STp->buffer)->cleared = 0;
1226 (STp->buffer)->writing = 0;
1227 (STp->buffer)->syscall_result = 0;
1228
1229 STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY);
1230
1231 STp->dirty = 0;
1232 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1233 STps = &(STp->ps[i]);
1234 STps->rw = ST_IDLE;
1235 }
1236 STp->try_dio_now = STp->try_dio;
1237 STp->recover_count = 0;
1238 DEB( STp->nbr_waits = STp->nbr_finished = 0;
1239 STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; )
1240
1241 retval = check_tape(STp, filp);
1242 if (retval < 0)
1243 goto err_out;
1244 if ((filp->f_flags & O_NONBLOCK) == 0 &&
1245 retval != CHKRES_READY) {
1246 if (STp->ready == NO_TAPE)
1247 retval = (-ENOMEDIUM);
1248 else
1249 retval = (-EIO);
1250 goto err_out;
1251 }
1252 mutex_unlock(&st_mutex);
1253 return 0;
1254
1255 err_out:
1256 normalize_buffer(STp->buffer);
1257 STp->in_use = 0;
1258 scsi_tape_put(STp);
1259 mutex_unlock(&st_mutex);
1260 return retval;
1261
1262}
1263
1264
1265/* Flush the tape buffer before close */
1266static int st_flush(struct file *filp, fl_owner_t id)
1267{
1268 int result = 0, result2;
1269 unsigned char cmd[MAX_COMMAND_SIZE];
1270 struct st_request *SRpnt;
1271 struct scsi_tape *STp = filp->private_data;
1272 struct st_modedef *STm = &(STp->modes[STp->current_mode]);
1273 struct st_partstat *STps = &(STp->ps[STp->partition]);
1274 char *name = tape_name(STp);
1275
1276 if (file_count(filp) > 1)
1277 return 0;
1278
1279 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1280 result = st_flush_write_buffer(STp);
1281 if (result != 0 && result != (-ENOSPC))
1282 goto out;
1283 }
1284
1285 if (STp->can_partitions &&
1286 (result2 = switch_partition(STp)) < 0) {
1287 DEBC(printk(ST_DEB_MSG
1288 "%s: switch_partition at close failed.\n", name));
1289 if (result == 0)
1290 result = result2;
1291 goto out;
1292 }
1293
1294 DEBC( if (STp->nbr_requests)
1295 printk(KERN_DEBUG "%s: Number of r/w requests %d, dio used in %d, pages %d.\n",
1296 name, STp->nbr_requests, STp->nbr_dio, STp->nbr_pages));
1297
1298 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1299 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1300
1301 DEBC(printk(ST_DEB_MSG "%s: Async write waits %d, finished %d.\n",
1302 name, STp->nbr_waits, STp->nbr_finished);
1303 )
1304
1305 memset(cmd, 0, MAX_COMMAND_SIZE);
1306 cmd[0] = WRITE_FILEMARKS;
1307 cmd[4] = 1 + STp->two_fm;
1308
1309 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
1310 STp->device->request_queue->rq_timeout,
1311 MAX_WRITE_RETRIES, 1);
1312 if (!SRpnt) {
1313 result = (STp->buffer)->syscall_result;
1314 goto out;
1315 }
1316
1317 if (STp->buffer->syscall_result == 0 ||
1318 (cmdstatp->have_sense && !cmdstatp->deferred &&
1319 (cmdstatp->flags & SENSE_EOM) &&
1320 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
1321 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
1322 (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) {
1323 /* Write successful at EOM */
1324 st_release_request(SRpnt);
1325 SRpnt = NULL;
1326 if (STps->drv_file >= 0)
1327 STps->drv_file++;
1328 STps->drv_block = 0;
1329 if (STp->two_fm)
1330 cross_eof(STp, 0);
1331 STps->eof = ST_FM;
1332 }
1333 else { /* Write error */
1334 st_release_request(SRpnt);
1335 SRpnt = NULL;
1336 printk(KERN_ERR "%s: Error on write filemark.\n", name);
1337 if (result == 0)
1338 result = (-EIO);
1339 }
1340
1341 DEBC(printk(ST_DEB_MSG "%s: Buffer flushed, %d EOF(s) written\n",
1342 name, cmd[4]));
1343 } else if (!STp->rew_at_close) {
1344 STps = &(STp->ps[STp->partition]);
1345 if (!STm->sysv || STps->rw != ST_READING) {
1346 if (STp->can_bsr)
1347 result = flush_buffer(STp, 0);
1348 else if (STps->eof == ST_FM_HIT) {
1349 result = cross_eof(STp, 0);
1350 if (result) {
1351 if (STps->drv_file >= 0)
1352 STps->drv_file++;
1353 STps->drv_block = 0;
1354 STps->eof = ST_FM;
1355 } else
1356 STps->eof = ST_NOEOF;
1357 }
1358 } else if ((STps->eof == ST_NOEOF &&
1359 !(result = cross_eof(STp, 1))) ||
1360 STps->eof == ST_FM_HIT) {
1361 if (STps->drv_file >= 0)
1362 STps->drv_file++;
1363 STps->drv_block = 0;
1364 STps->eof = ST_FM;
1365 }
1366 }
1367
1368 out:
1369 if (STp->rew_at_close) {
1370 result2 = st_int_ioctl(STp, MTREW, 1);
1371 if (result == 0)
1372 result = result2;
1373 }
1374 return result;
1375}
1376
1377
1378/* Close the device and release it. BKL is not needed: this is the only thread
1379 accessing this tape. */
1380static int st_release(struct inode *inode, struct file *filp)
1381{
1382 int result = 0;
1383 struct scsi_tape *STp = filp->private_data;
1384
1385 if (STp->door_locked == ST_LOCKED_AUTO)
1386 do_door_lock(STp, 0);
1387
1388 normalize_buffer(STp->buffer);
1389 write_lock(&st_dev_arr_lock);
1390 STp->in_use = 0;
1391 write_unlock(&st_dev_arr_lock);
1392 scsi_tape_put(STp);
1393
1394 return result;
1395}
1396
1397/* The checks common to both reading and writing */
1398static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
1399{
1400 ssize_t retval = 0;
1401
1402 /*
1403 * If we are in the middle of error recovery, don't let anyone
1404 * else try and use this device. Also, if error recovery fails, it
1405 * may try and take the device offline, in which case all further
1406 * access to the device is prohibited.
1407 */
1408 if (!scsi_block_when_processing_errors(STp->device)) {
1409 retval = (-ENXIO);
1410 goto out;
1411 }
1412
1413 if (STp->ready != ST_READY) {
1414 if (STp->ready == ST_NO_TAPE)
1415 retval = (-ENOMEDIUM);
1416 else
1417 retval = (-EIO);
1418 goto out;
1419 }
1420
1421 if (! STp->modes[STp->current_mode].defined) {
1422 retval = (-ENXIO);
1423 goto out;
1424 }
1425
1426
1427 /*
1428 * If there was a bus reset, block further access
1429 * to this device.
1430 */
1431 if (STp->pos_unknown) {
1432 retval = (-EIO);
1433 goto out;
1434 }
1435
1436 if (count == 0)
1437 goto out;
1438
1439 DEB(
1440 if (!STp->in_use) {
1441 printk(ST_DEB_MSG "%s: Incorrect device.\n", tape_name(STp));
1442 retval = (-EIO);
1443 goto out;
1444 } ) /* end DEB */
1445
1446 if (STp->can_partitions &&
1447 (retval = switch_partition(STp)) < 0)
1448 goto out;
1449
1450 if (STp->block_size == 0 && STp->max_block > 0 &&
1451 (count < STp->min_block || count > STp->max_block)) {
1452 retval = (-EINVAL);
1453 goto out;
1454 }
1455
1456 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED &&
1457 !do_door_lock(STp, 1))
1458 STp->door_locked = ST_LOCKED_AUTO;
1459
1460 out:
1461 return retval;
1462}
1463
1464
1465static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
1466 size_t count, int is_read)
1467{
1468 int i, bufsize, retval = 0;
1469 struct st_buffer *STbp = STp->buffer;
1470
1471 if (is_read)
1472 i = STp->try_dio_now && try_rdio;
1473 else
1474 i = STp->try_dio_now && try_wdio;
1475
1476 if (i && ((unsigned long)buf & queue_dma_alignment(
1477 STp->device->request_queue)) == 0) {
1478 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf,
1479 count, (is_read ? READ : WRITE));
1480 if (i > 0) {
1481 STbp->do_dio = i;
1482 STbp->buffer_bytes = 0; /* can be used as transfer counter */
1483 }
1484 else
1485 STbp->do_dio = 0; /* fall back to buffering with any error */
1486 STbp->sg_segs = STbp->do_dio;
1487 DEB(
1488 if (STbp->do_dio) {
1489 STp->nbr_dio++;
1490 STp->nbr_pages += STbp->do_dio;
1491 }
1492 )
1493 } else
1494 STbp->do_dio = 0;
1495 DEB( STp->nbr_requests++; )
1496
1497 if (!STbp->do_dio) {
1498 if (STp->block_size)
1499 bufsize = STp->block_size > st_fixed_buffer_size ?
1500 STp->block_size : st_fixed_buffer_size;
1501 else {
1502 bufsize = count;
1503 /* Make sure that data from previous user is not leaked even if
1504 HBA does not return correct residual */
1505 if (is_read && STp->sili && !STbp->cleared)
1506 clear_buffer(STbp);
1507 }
1508
1509 if (bufsize > STbp->buffer_size &&
1510 !enlarge_buffer(STbp, bufsize, STp->restr_dma)) {
1511 printk(KERN_WARNING "%s: Can't allocate %d byte tape buffer.\n",
1512 tape_name(STp), bufsize);
1513 retval = (-EOVERFLOW);
1514 goto out;
1515 }
1516 if (STp->block_size)
1517 STbp->buffer_blocks = bufsize / STp->block_size;
1518 }
1519
1520 out:
1521 return retval;
1522}
1523
1524
1525/* Can be called more than once after each setup_buffer() */
1526static void release_buffering(struct scsi_tape *STp, int is_read)
1527{
1528 struct st_buffer *STbp;
1529
1530 STbp = STp->buffer;
1531 if (STbp->do_dio) {
1532 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read);
1533 STbp->do_dio = 0;
1534 STbp->sg_segs = 0;
1535 }
1536}
1537
1538
1539/* Write command */
1540static ssize_t
1541st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
1542{
1543 ssize_t total;
1544 ssize_t i, do_count, blks, transfer;
1545 ssize_t retval;
1546 int undone, retry_eot = 0, scode;
1547 int async_write;
1548 unsigned char cmd[MAX_COMMAND_SIZE];
1549 const char __user *b_point;
1550 struct st_request *SRpnt = NULL;
1551 struct scsi_tape *STp = filp->private_data;
1552 struct st_modedef *STm;
1553 struct st_partstat *STps;
1554 struct st_buffer *STbp;
1555 char *name = tape_name(STp);
1556
1557 if (mutex_lock_interruptible(&STp->lock))
1558 return -ERESTARTSYS;
1559
1560 retval = rw_checks(STp, filp, count);
1561 if (retval || count == 0)
1562 goto out;
1563
1564 /* Write must be integral number of blocks */
1565 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
1566 printk(KERN_WARNING "%s: Write not multiple of tape block size.\n",
1567 name);
1568 retval = (-EINVAL);
1569 goto out;
1570 }
1571
1572 STm = &(STp->modes[STp->current_mode]);
1573 STps = &(STp->ps[STp->partition]);
1574
1575 if (STp->write_prot) {
1576 retval = (-EACCES);
1577 goto out;
1578 }
1579
1580
1581 if (STps->rw == ST_READING) {
1582 retval = flush_buffer(STp, 0);
1583 if (retval)
1584 goto out;
1585 STps->rw = ST_WRITING;
1586 } else if (STps->rw != ST_WRITING &&
1587 STps->drv_file == 0 && STps->drv_block == 0) {
1588 if ((retval = set_mode_densblk(STp, STm)) < 0)
1589 goto out;
1590 if (STm->default_compression != ST_DONT_TOUCH &&
1591 !(STp->compression_changed)) {
1592 if (st_compression(STp, (STm->default_compression == ST_YES))) {
1593 printk(KERN_WARNING "%s: Can't set default compression.\n",
1594 name);
1595 if (modes_defined) {
1596 retval = (-EINVAL);
1597 goto out;
1598 }
1599 }
1600 }
1601 }
1602
1603 STbp = STp->buffer;
1604 i = write_behind_check(STp);
1605 if (i) {
1606 if (i == -ENOSPC)
1607 STps->eof = ST_EOM_OK;
1608 else
1609 STps->eof = ST_EOM_ERROR;
1610 }
1611
1612 if (STps->eof == ST_EOM_OK) {
1613 STps->eof = ST_EOD_1; /* allow next write */
1614 retval = (-ENOSPC);
1615 goto out;
1616 }
1617 else if (STps->eof == ST_EOM_ERROR) {
1618 retval = (-EIO);
1619 goto out;
1620 }
1621
1622 /* Check the buffer readability in cases where copy_user might catch
1623 the problems after some tape movement. */
1624 if (STp->block_size != 0 &&
1625 !STbp->do_dio &&
1626 (copy_from_user(&i, buf, 1) != 0 ||
1627 copy_from_user(&i, buf + count - 1, 1) != 0)) {
1628 retval = (-EFAULT);
1629 goto out;
1630 }
1631
1632 retval = setup_buffering(STp, buf, count, 0);
1633 if (retval)
1634 goto out;
1635
1636 total = count;
1637
1638 memset(cmd, 0, MAX_COMMAND_SIZE);
1639 cmd[0] = WRITE_6;
1640 cmd[1] = (STp->block_size != 0);
1641
1642 STps->rw = ST_WRITING;
1643
1644 b_point = buf;
1645 while (count > 0 && !retry_eot) {
1646
1647 if (STbp->do_dio) {
1648 do_count = count;
1649 }
1650 else {
1651 if (STp->block_size == 0)
1652 do_count = count;
1653 else {
1654 do_count = STbp->buffer_blocks * STp->block_size -
1655 STbp->buffer_bytes;
1656 if (do_count > count)
1657 do_count = count;
1658 }
1659
1660 i = append_to_buffer(b_point, STbp, do_count);
1661 if (i) {
1662 retval = i;
1663 goto out;
1664 }
1665 }
1666 count -= do_count;
1667 b_point += do_count;
1668
1669 async_write = STp->block_size == 0 && !STbp->do_dio &&
1670 STm->do_async_writes && STps->eof < ST_EOM_OK;
1671
1672 if (STp->block_size != 0 && STm->do_buffer_writes &&
1673 !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
1674 STbp->buffer_bytes < STbp->buffer_size) {
1675 STp->dirty = 1;
1676 /* Don't write a buffer that is not full enough. */
1677 if (!async_write && count == 0)
1678 break;
1679 }
1680
1681 retry_write:
1682 if (STp->block_size == 0)
1683 blks = transfer = do_count;
1684 else {
1685 if (!STbp->do_dio)
1686 blks = STbp->buffer_bytes;
1687 else
1688 blks = do_count;
1689 blks /= STp->block_size;
1690 transfer = blks * STp->block_size;
1691 }
1692 cmd[2] = blks >> 16;
1693 cmd[3] = blks >> 8;
1694 cmd[4] = blks;
1695
1696 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
1697 STp->device->request_queue->rq_timeout,
1698 MAX_WRITE_RETRIES, !async_write);
1699 if (!SRpnt) {
1700 retval = STbp->syscall_result;
1701 goto out;
1702 }
1703 if (async_write && !STbp->syscall_result) {
1704 STbp->writing = transfer;
1705 STp->dirty = !(STbp->writing ==
1706 STbp->buffer_bytes);
1707 SRpnt = NULL; /* Prevent releasing this request! */
1708 DEB( STp->write_pending = 1; )
1709 break;
1710 }
1711
1712 if (STbp->syscall_result != 0) {
1713 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1714
1715 DEBC(printk(ST_DEB_MSG "%s: Error on write:\n", name));
1716 if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) {
1717 scode = cmdstatp->sense_hdr.sense_key;
1718 if (cmdstatp->remainder_valid)
1719 undone = (int)cmdstatp->uremainder64;
1720 else if (STp->block_size == 0 &&
1721 scode == VOLUME_OVERFLOW)
1722 undone = transfer;
1723 else
1724 undone = 0;
1725 if (STp->block_size != 0)
1726 undone *= STp->block_size;
1727 if (undone <= do_count) {
1728 /* Only data from this write is not written */
1729 count += undone;
1730 b_point -= undone;
1731 do_count -= undone;
1732 if (STp->block_size)
1733 blks = (transfer - undone) / STp->block_size;
1734 STps->eof = ST_EOM_OK;
1735 /* Continue in fixed block mode if all written
1736 in this request but still something left to write
1737 (retval left to zero)
1738 */
1739 if (STp->block_size == 0 ||
1740 undone > 0 || count == 0)
1741 retval = (-ENOSPC); /* EOM within current request */
1742 DEBC(printk(ST_DEB_MSG
1743 "%s: EOM with %d bytes unwritten.\n",
1744 name, (int)count));
1745 } else {
1746 /* EOT within data buffered earlier (possible only
1747 in fixed block mode without direct i/o) */
1748 if (!retry_eot && !cmdstatp->deferred &&
1749 (scode == NO_SENSE || scode == RECOVERED_ERROR)) {
1750 move_buffer_data(STp->buffer, transfer - undone);
1751 retry_eot = 1;
1752 if (STps->drv_block >= 0) {
1753 STps->drv_block += (transfer - undone) /
1754 STp->block_size;
1755 }
1756 STps->eof = ST_EOM_OK;
1757 DEBC(printk(ST_DEB_MSG
1758 "%s: Retry write of %d bytes at EOM.\n",
1759 name, STp->buffer->buffer_bytes));
1760 goto retry_write;
1761 }
1762 else {
1763 /* Either error within data buffered by driver or
1764 failed retry */
1765 count -= do_count;
1766 blks = do_count = 0;
1767 STps->eof = ST_EOM_ERROR;
1768 STps->drv_block = (-1); /* Too cautious? */
1769 retval = (-EIO); /* EOM for old data */
1770 DEBC(printk(ST_DEB_MSG
1771 "%s: EOM with lost data.\n",
1772 name));
1773 }
1774 }
1775 } else {
1776 count += do_count;
1777 STps->drv_block = (-1); /* Too cautious? */
1778 retval = STbp->syscall_result;
1779 }
1780
1781 }
1782
1783 if (STps->drv_block >= 0) {
1784 if (STp->block_size == 0)
1785 STps->drv_block += (do_count > 0);
1786 else
1787 STps->drv_block += blks;
1788 }
1789
1790 STbp->buffer_bytes = 0;
1791 STp->dirty = 0;
1792
1793 if (retval || retry_eot) {
1794 if (count < total)
1795 retval = total - count;
1796 goto out;
1797 }
1798 }
1799
1800 if (STps->eof == ST_EOD_1)
1801 STps->eof = ST_EOM_OK;
1802 else if (STps->eof != ST_EOM_OK)
1803 STps->eof = ST_NOEOF;
1804 retval = total - count;
1805
1806 out:
1807 if (SRpnt != NULL)
1808 st_release_request(SRpnt);
1809 release_buffering(STp, 0);
1810 mutex_unlock(&STp->lock);
1811
1812 return retval;
1813}
1814
1815/* Read data from the tape. Returns zero in the normal case, one if the
1816 eof status has changed, and the negative error code in case of a
1817 fatal error. Otherwise updates the buffer and the eof state.
1818
1819 Does release user buffer mapping if it is set.
1820*/
1821static long read_tape(struct scsi_tape *STp, long count,
1822 struct st_request ** aSRpnt)
1823{
1824 int transfer, blks, bytes;
1825 unsigned char cmd[MAX_COMMAND_SIZE];
1826 struct st_request *SRpnt;
1827 struct st_modedef *STm;
1828 struct st_partstat *STps;
1829 struct st_buffer *STbp;
1830 int retval = 0;
1831 char *name = tape_name(STp);
1832
1833 if (count == 0)
1834 return 0;
1835
1836 STm = &(STp->modes[STp->current_mode]);
1837 STps = &(STp->ps[STp->partition]);
1838 if (STps->eof == ST_FM_HIT)
1839 return 1;
1840 STbp = STp->buffer;
1841
1842 if (STp->block_size == 0)
1843 blks = bytes = count;
1844 else {
1845 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
1846 blks = (STp->buffer)->buffer_blocks;
1847 bytes = blks * STp->block_size;
1848 } else {
1849 bytes = count;
1850 if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size)
1851 bytes = (STp->buffer)->buffer_size;
1852 blks = bytes / STp->block_size;
1853 bytes = blks * STp->block_size;
1854 }
1855 }
1856
1857 memset(cmd, 0, MAX_COMMAND_SIZE);
1858 cmd[0] = READ_6;
1859 cmd[1] = (STp->block_size != 0);
1860 if (!cmd[1] && STp->sili)
1861 cmd[1] |= 2;
1862 cmd[2] = blks >> 16;
1863 cmd[3] = blks >> 8;
1864 cmd[4] = blks;
1865
1866 SRpnt = *aSRpnt;
1867 SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE,
1868 STp->device->request_queue->rq_timeout,
1869 MAX_RETRIES, 1);
1870 release_buffering(STp, 1);
1871 *aSRpnt = SRpnt;
1872 if (!SRpnt)
1873 return STbp->syscall_result;
1874
1875 STbp->read_pointer = 0;
1876 STps->at_sm = 0;
1877
1878 /* Something to check */
1879 if (STbp->syscall_result) {
1880 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1881
1882 retval = 1;
1883 DEBC(printk(ST_DEB_MSG "%s: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1884 name,
1885 SRpnt->sense[0], SRpnt->sense[1],
1886 SRpnt->sense[2], SRpnt->sense[3],
1887 SRpnt->sense[4], SRpnt->sense[5],
1888 SRpnt->sense[6], SRpnt->sense[7]));
1889 if (cmdstatp->have_sense) {
1890
1891 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
1892 cmdstatp->flags &= 0xcf; /* No need for EOM in this case */
1893
1894 if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */
1895 /* Compute the residual count */
1896 if (cmdstatp->remainder_valid)
1897 transfer = (int)cmdstatp->uremainder64;
1898 else
1899 transfer = 0;
1900 if (STp->block_size == 0 &&
1901 cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR)
1902 transfer = bytes;
1903
1904 if (cmdstatp->flags & SENSE_ILI) { /* ILI */
1905 if (STp->block_size == 0) {
1906 if (transfer <= 0) {
1907 if (transfer < 0)
1908 printk(KERN_NOTICE
1909 "%s: Failed to read %d byte block with %d byte transfer.\n",
1910 name, bytes - transfer, bytes);
1911 if (STps->drv_block >= 0)
1912 STps->drv_block += 1;
1913 STbp->buffer_bytes = 0;
1914 return (-ENOMEM);
1915 }
1916 STbp->buffer_bytes = bytes - transfer;
1917 } else {
1918 st_release_request(SRpnt);
1919 SRpnt = *aSRpnt = NULL;
1920 if (transfer == blks) { /* We did not get anything, error */
1921 printk(KERN_NOTICE "%s: Incorrect block size.\n", name);
1922 if (STps->drv_block >= 0)
1923 STps->drv_block += blks - transfer + 1;
1924 st_int_ioctl(STp, MTBSR, 1);
1925 return (-EIO);
1926 }
1927 /* We have some data, deliver it */
1928 STbp->buffer_bytes = (blks - transfer) *
1929 STp->block_size;
1930 DEBC(printk(ST_DEB_MSG
1931 "%s: ILI but enough data received %ld %d.\n",
1932 name, count, STbp->buffer_bytes));
1933 if (STps->drv_block >= 0)
1934 STps->drv_block += 1;
1935 if (st_int_ioctl(STp, MTBSR, 1))
1936 return (-EIO);
1937 }
1938 } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */
1939 if (STps->eof != ST_FM_HIT)
1940 STps->eof = ST_FM_HIT;
1941 else
1942 STps->eof = ST_EOD_2;
1943 if (STp->block_size == 0)
1944 STbp->buffer_bytes = 0;
1945 else
1946 STbp->buffer_bytes =
1947 bytes - transfer * STp->block_size;
1948 DEBC(printk(ST_DEB_MSG
1949 "%s: EOF detected (%d bytes read).\n",
1950 name, STbp->buffer_bytes));
1951 } else if (cmdstatp->flags & SENSE_EOM) {
1952 if (STps->eof == ST_FM)
1953 STps->eof = ST_EOD_1;
1954 else
1955 STps->eof = ST_EOM_OK;
1956 if (STp->block_size == 0)
1957 STbp->buffer_bytes = bytes - transfer;
1958 else
1959 STbp->buffer_bytes =
1960 bytes - transfer * STp->block_size;
1961
1962 DEBC(printk(ST_DEB_MSG "%s: EOM detected (%d bytes read).\n",
1963 name, STbp->buffer_bytes));
1964 }
1965 }
1966 /* end of EOF, EOM, ILI test */
1967 else { /* nonzero sense key */
1968 DEBC(printk(ST_DEB_MSG
1969 "%s: Tape error while reading.\n", name));
1970 STps->drv_block = (-1);
1971 if (STps->eof == ST_FM &&
1972 cmdstatp->sense_hdr.sense_key == BLANK_CHECK) {
1973 DEBC(printk(ST_DEB_MSG
1974 "%s: Zero returned for first BLANK CHECK after EOF.\n",
1975 name));
1976 STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */
1977 } else /* Some other extended sense code */
1978 retval = (-EIO);
1979 }
1980
1981 if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */
1982 STbp->buffer_bytes = 0;
1983 }
1984 /* End of extended sense test */
1985 else { /* Non-extended sense */
1986 retval = STbp->syscall_result;
1987 }
1988
1989 }
1990 /* End of error handling */
1991 else { /* Read successful */
1992 STbp->buffer_bytes = bytes;
1993 if (STp->sili) /* In fixed block mode residual is always zero here */
1994 STbp->buffer_bytes -= STp->buffer->cmdstat.residual;
1995 }
1996
1997 if (STps->drv_block >= 0) {
1998 if (STp->block_size == 0)
1999 STps->drv_block++;
2000 else
2001 STps->drv_block += STbp->buffer_bytes / STp->block_size;
2002 }
2003 return retval;
2004}
2005
2006
2007/* Read command */
2008static ssize_t
2009st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
2010{
2011 ssize_t total;
2012 ssize_t retval = 0;
2013 ssize_t i, transfer;
2014 int special, do_dio = 0;
2015 struct st_request *SRpnt = NULL;
2016 struct scsi_tape *STp = filp->private_data;
2017 struct st_modedef *STm;
2018 struct st_partstat *STps;
2019 struct st_buffer *STbp = STp->buffer;
2020 DEB( char *name = tape_name(STp); )
2021
2022 if (mutex_lock_interruptible(&STp->lock))
2023 return -ERESTARTSYS;
2024
2025 retval = rw_checks(STp, filp, count);
2026 if (retval || count == 0)
2027 goto out;
2028
2029 STm = &(STp->modes[STp->current_mode]);
2030 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
2031 if (!STm->do_read_ahead) {
2032 retval = (-EINVAL); /* Read must be integral number of blocks */
2033 goto out;
2034 }
2035 STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */
2036 }
2037
2038 STps = &(STp->ps[STp->partition]);
2039 if (STps->rw == ST_WRITING) {
2040 retval = flush_buffer(STp, 0);
2041 if (retval)
2042 goto out;
2043 STps->rw = ST_READING;
2044 }
2045 DEB(
2046 if (debugging && STps->eof != ST_NOEOF)
2047 printk(ST_DEB_MSG "%s: EOF/EOM flag up (%d). Bytes %d\n", name,
2048 STps->eof, STbp->buffer_bytes);
2049 ) /* end DEB */
2050
2051 retval = setup_buffering(STp, buf, count, 1);
2052 if (retval)
2053 goto out;
2054 do_dio = STbp->do_dio;
2055
2056 if (STbp->buffer_bytes == 0 &&
2057 STps->eof >= ST_EOD_1) {
2058 if (STps->eof < ST_EOD) {
2059 STps->eof += 1;
2060 retval = 0;
2061 goto out;
2062 }
2063 retval = (-EIO); /* EOM or Blank Check */
2064 goto out;
2065 }
2066
2067 if (do_dio) {
2068 /* Check the buffer writability before any tape movement. Don't alter
2069 buffer data. */
2070 if (copy_from_user(&i, buf, 1) != 0 ||
2071 copy_to_user(buf, &i, 1) != 0 ||
2072 copy_from_user(&i, buf + count - 1, 1) != 0 ||
2073 copy_to_user(buf + count - 1, &i, 1) != 0) {
2074 retval = (-EFAULT);
2075 goto out;
2076 }
2077 }
2078
2079 STps->rw = ST_READING;
2080
2081
2082 /* Loop until enough data in buffer or a special condition found */
2083 for (total = 0, special = 0; total < count && !special;) {
2084
2085 /* Get new data if the buffer is empty */
2086 if (STbp->buffer_bytes == 0) {
2087 special = read_tape(STp, count - total, &SRpnt);
2088 if (special < 0) { /* No need to continue read */
2089 retval = special;
2090 goto out;
2091 }
2092 }
2093
2094 /* Move the data from driver buffer to user buffer */
2095 if (STbp->buffer_bytes > 0) {
2096 DEB(
2097 if (debugging && STps->eof != ST_NOEOF)
2098 printk(ST_DEB_MSG
2099 "%s: EOF up (%d). Left %d, needed %d.\n", name,
2100 STps->eof, STbp->buffer_bytes,
2101 (int)(count - total));
2102 ) /* end DEB */
2103 transfer = STbp->buffer_bytes < count - total ?
2104 STbp->buffer_bytes : count - total;
2105 if (!do_dio) {
2106 i = from_buffer(STbp, buf, transfer);
2107 if (i) {
2108 retval = i;
2109 goto out;
2110 }
2111 }
2112 buf += transfer;
2113 total += transfer;
2114 }
2115
2116 if (STp->block_size == 0)
2117 break; /* Read only one variable length block */
2118
2119 } /* for (total = 0, special = 0;
2120 total < count && !special; ) */
2121
2122 /* Change the eof state if no data from tape or buffer */
2123 if (total == 0) {
2124 if (STps->eof == ST_FM_HIT) {
2125 STps->eof = ST_FM;
2126 STps->drv_block = 0;
2127 if (STps->drv_file >= 0)
2128 STps->drv_file++;
2129 } else if (STps->eof == ST_EOD_1) {
2130 STps->eof = ST_EOD_2;
2131 STps->drv_block = 0;
2132 if (STps->drv_file >= 0)
2133 STps->drv_file++;
2134 } else if (STps->eof == ST_EOD_2)
2135 STps->eof = ST_EOD;
2136 } else if (STps->eof == ST_FM)
2137 STps->eof = ST_NOEOF;
2138 retval = total;
2139
2140 out:
2141 if (SRpnt != NULL) {
2142 st_release_request(SRpnt);
2143 SRpnt = NULL;
2144 }
2145 if (do_dio) {
2146 release_buffering(STp, 1);
2147 STbp->buffer_bytes = 0;
2148 }
2149 mutex_unlock(&STp->lock);
2150
2151 return retval;
2152}
2153
2154
2155
2156DEB(
2157/* Set the driver options */
2158static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm, char *name)
2159{
2160 if (debugging) {
2161 printk(KERN_INFO
2162 "%s: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n",
2163 name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes,
2164 STm->do_read_ahead);
2165 printk(KERN_INFO
2166 "%s: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n",
2167 name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock);
2168 printk(KERN_INFO
2169 "%s: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n",
2170 name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
2171 STp->scsi2_logical);
2172 printk(KERN_INFO
2173 "%s: sysv: %d nowait: %d sili: %d\n", name, STm->sysv, STp->immediate,
2174 STp->sili);
2175 printk(KERN_INFO "%s: debugging: %d\n",
2176 name, debugging);
2177 }
2178}
2179 )
2180
2181
2182static int st_set_options(struct scsi_tape *STp, long options)
2183{
2184 int value;
2185 long code;
2186 struct st_modedef *STm;
2187 char *name = tape_name(STp);
2188 struct cdev *cd0, *cd1;
2189
2190 STm = &(STp->modes[STp->current_mode]);
2191 if (!STm->defined) {
2192 cd0 = STm->cdevs[0]; cd1 = STm->cdevs[1];
2193 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef));
2194 STm->cdevs[0] = cd0; STm->cdevs[1] = cd1;
2195 modes_defined = 1;
2196 DEBC(printk(ST_DEB_MSG
2197 "%s: Initialized mode %d definition from mode 0\n",
2198 name, STp->current_mode));
2199 }
2200
2201 code = options & MT_ST_OPTIONS;
2202 if (code == MT_ST_BOOLEANS) {
2203 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
2204 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
2205 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
2206 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
2207 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
2208 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
2209 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
2210 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
2211 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
2212 if ((STp->device)->scsi_level >= SCSI_2)
2213 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
2214 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
2215 STp->immediate = (options & MT_ST_NOWAIT) != 0;
2216 STm->sysv = (options & MT_ST_SYSV) != 0;
2217 STp->sili = (options & MT_ST_SILI) != 0;
2218 DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
2219 st_log_options(STp, STm, name); )
2220 } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
2221 value = (code == MT_ST_SETBOOLEANS);
2222 if ((options & MT_ST_BUFFER_WRITES) != 0)
2223 STm->do_buffer_writes = value;
2224 if ((options & MT_ST_ASYNC_WRITES) != 0)
2225 STm->do_async_writes = value;
2226 if ((options & MT_ST_DEF_WRITES) != 0)
2227 STm->defaults_for_writes = value;
2228 if ((options & MT_ST_READ_AHEAD) != 0)
2229 STm->do_read_ahead = value;
2230 if ((options & MT_ST_TWO_FM) != 0)
2231 STp->two_fm = value;
2232 if ((options & MT_ST_FAST_MTEOM) != 0)
2233 STp->fast_mteom = value;
2234 if ((options & MT_ST_AUTO_LOCK) != 0)
2235 STp->do_auto_lock = value;
2236 if ((options & MT_ST_CAN_BSR) != 0)
2237 STp->can_bsr = value;
2238 if ((options & MT_ST_NO_BLKLIMS) != 0)
2239 STp->omit_blklims = value;
2240 if ((STp->device)->scsi_level >= SCSI_2 &&
2241 (options & MT_ST_CAN_PARTITIONS) != 0)
2242 STp->can_partitions = value;
2243 if ((options & MT_ST_SCSI2LOGICAL) != 0)
2244 STp->scsi2_logical = value;
2245 if ((options & MT_ST_NOWAIT) != 0)
2246 STp->immediate = value;
2247 if ((options & MT_ST_SYSV) != 0)
2248 STm->sysv = value;
2249 if ((options & MT_ST_SILI) != 0)
2250 STp->sili = value;
2251 DEB(
2252 if ((options & MT_ST_DEBUGGING) != 0)
2253 debugging = value;
2254 st_log_options(STp, STm, name); )
2255 } else if (code == MT_ST_WRITE_THRESHOLD) {
2256 /* Retained for compatibility */
2257 } else if (code == MT_ST_DEF_BLKSIZE) {
2258 value = (options & ~MT_ST_OPTIONS);
2259 if (value == ~MT_ST_OPTIONS) {
2260 STm->default_blksize = (-1);
2261 DEBC( printk(KERN_INFO "%s: Default block size disabled.\n", name));
2262 } else {
2263 STm->default_blksize = value;
2264 DEBC( printk(KERN_INFO "%s: Default block size set to %d bytes.\n",
2265 name, STm->default_blksize));
2266 if (STp->ready == ST_READY) {
2267 STp->blksize_changed = 0;
2268 set_mode_densblk(STp, STm);
2269 }
2270 }
2271 } else if (code == MT_ST_TIMEOUTS) {
2272 value = (options & ~MT_ST_OPTIONS);
2273 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
2274 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
2275 DEBC( printk(KERN_INFO "%s: Long timeout set to %d seconds.\n", name,
2276 (value & ~MT_ST_SET_LONG_TIMEOUT)));
2277 } else {
2278 blk_queue_rq_timeout(STp->device->request_queue,
2279 value * HZ);
2280 DEBC( printk(KERN_INFO "%s: Normal timeout set to %d seconds.\n",
2281 name, value) );
2282 }
2283 } else if (code == MT_ST_SET_CLN) {
2284 value = (options & ~MT_ST_OPTIONS) & 0xff;
2285 if (value != 0 &&
2286 (value < EXTENDED_SENSE_START ||
2287 value >= SCSI_SENSE_BUFFERSIZE))
2288 return (-EINVAL);
2289 STp->cln_mode = value;
2290 STp->cln_sense_mask = (options >> 8) & 0xff;
2291 STp->cln_sense_value = (options >> 16) & 0xff;
2292 printk(KERN_INFO
2293 "%s: Cleaning request mode %d, mask %02x, value %02x\n",
2294 name, value, STp->cln_sense_mask, STp->cln_sense_value);
2295 } else if (code == MT_ST_DEF_OPTIONS) {
2296 code = (options & ~MT_ST_CLEAR_DEFAULT);
2297 value = (options & MT_ST_CLEAR_DEFAULT);
2298 if (code == MT_ST_DEF_DENSITY) {
2299 if (value == MT_ST_CLEAR_DEFAULT) {
2300 STm->default_density = (-1);
2301 DEBC( printk(KERN_INFO "%s: Density default disabled.\n",
2302 name));
2303 } else {
2304 STm->default_density = value & 0xff;
2305 DEBC( printk(KERN_INFO "%s: Density default set to %x\n",
2306 name, STm->default_density));
2307 if (STp->ready == ST_READY) {
2308 STp->density_changed = 0;
2309 set_mode_densblk(STp, STm);
2310 }
2311 }
2312 } else if (code == MT_ST_DEF_DRVBUFFER) {
2313 if (value == MT_ST_CLEAR_DEFAULT) {
2314 STp->default_drvbuffer = 0xff;
2315 DEBC( printk(KERN_INFO
2316 "%s: Drive buffer default disabled.\n", name));
2317 } else {
2318 STp->default_drvbuffer = value & 7;
2319 DEBC( printk(KERN_INFO
2320 "%s: Drive buffer default set to %x\n",
2321 name, STp->default_drvbuffer));
2322 if (STp->ready == ST_READY)
2323 st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer);
2324 }
2325 } else if (code == MT_ST_DEF_COMPRESSION) {
2326 if (value == MT_ST_CLEAR_DEFAULT) {
2327 STm->default_compression = ST_DONT_TOUCH;
2328 DEBC( printk(KERN_INFO
2329 "%s: Compression default disabled.\n", name));
2330 } else {
2331 if ((value & 0xff00) != 0) {
2332 STp->c_algo = (value & 0xff00) >> 8;
2333 DEBC( printk(KERN_INFO "%s: Compression algorithm set to 0x%x.\n",
2334 name, STp->c_algo));
2335 }
2336 if ((value & 0xff) != 0xff) {
2337 STm->default_compression = (value & 1 ? ST_YES : ST_NO);
2338 DEBC( printk(KERN_INFO "%s: Compression default set to %x\n",
2339 name, (value & 1)));
2340 if (STp->ready == ST_READY) {
2341 STp->compression_changed = 0;
2342 st_compression(STp, (STm->default_compression == ST_YES));
2343 }
2344 }
2345 }
2346 }
2347 } else
2348 return (-EIO);
2349
2350 return 0;
2351}
2352
2353#define MODE_HEADER_LENGTH 4
2354
2355/* Mode header and page byte offsets */
2356#define MH_OFF_DATA_LENGTH 0
2357#define MH_OFF_MEDIUM_TYPE 1
2358#define MH_OFF_DEV_SPECIFIC 2
2359#define MH_OFF_BDESCS_LENGTH 3
2360#define MP_OFF_PAGE_NBR 0
2361#define MP_OFF_PAGE_LENGTH 1
2362
2363/* Mode header and page bit masks */
2364#define MH_BIT_WP 0x80
2365#define MP_MSK_PAGE_NBR 0x3f
2366
2367/* Don't return block descriptors */
2368#define MODE_SENSE_OMIT_BDESCS 0x08
2369
2370#define MODE_SELECT_PAGE_FORMAT 0x10
2371
2372/* Read a mode page into the tape buffer. The block descriptors are included
2373 if incl_block_descs is true. The page control is ored to the page number
2374 parameter, if necessary. */
2375static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs)
2376{
2377 unsigned char cmd[MAX_COMMAND_SIZE];
2378 struct st_request *SRpnt;
2379
2380 memset(cmd, 0, MAX_COMMAND_SIZE);
2381 cmd[0] = MODE_SENSE;
2382 if (omit_block_descs)
2383 cmd[1] = MODE_SENSE_OMIT_BDESCS;
2384 cmd[2] = page;
2385 cmd[4] = 255;
2386
2387 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE,
2388 STp->device->request_queue->rq_timeout, 0, 1);
2389 if (SRpnt == NULL)
2390 return (STp->buffer)->syscall_result;
2391
2392 st_release_request(SRpnt);
2393
2394 return STp->buffer->syscall_result;
2395}
2396
2397
2398/* Send the mode page in the tape buffer to the drive. Assumes that the mode data
2399 in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */
2400static int write_mode_page(struct scsi_tape *STp, int page, int slow)
2401{
2402 int pgo;
2403 unsigned char cmd[MAX_COMMAND_SIZE];
2404 struct st_request *SRpnt;
2405 int timeout;
2406
2407 memset(cmd, 0, MAX_COMMAND_SIZE);
2408 cmd[0] = MODE_SELECT;
2409 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2410 pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH];
2411 cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2;
2412
2413 /* Clear reserved fields */
2414 (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0;
2415 (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0;
2416 (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP;
2417 (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR;
2418
2419 timeout = slow ?
2420 STp->long_timeout : STp->device->request_queue->rq_timeout;
2421 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE,
2422 timeout, 0, 1);
2423 if (SRpnt == NULL)
2424 return (STp->buffer)->syscall_result;
2425
2426 st_release_request(SRpnt);
2427
2428 return STp->buffer->syscall_result;
2429}
2430
2431
2432#define COMPRESSION_PAGE 0x0f
2433#define COMPRESSION_PAGE_LENGTH 16
2434
2435#define CP_OFF_DCE_DCC 2
2436#define CP_OFF_C_ALGO 7
2437
2438#define DCE_MASK 0x80
2439#define DCC_MASK 0x40
2440#define RED_MASK 0x60
2441
2442
2443/* Control the compression with mode page 15. Algorithm not changed if zero.
2444
2445 The block descriptors are read and written because Sony SDT-7000 does not
2446 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
2447 Including block descriptors should not cause any harm to other drives. */
2448
2449static int st_compression(struct scsi_tape * STp, int state)
2450{
2451 int retval;
2452 int mpoffs; /* Offset to mode page start */
2453 unsigned char *b_data = (STp->buffer)->b_data;
2454 DEB( char *name = tape_name(STp); )
2455
2456 if (STp->ready != ST_READY)
2457 return (-EIO);
2458
2459 /* Read the current page contents */
2460 retval = read_mode_page(STp, COMPRESSION_PAGE, 0);
2461 if (retval) {
2462 DEBC(printk(ST_DEB_MSG "%s: Compression mode page not supported.\n",
2463 name));
2464 return (-EIO);
2465 }
2466
2467 mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH];
2468 DEBC(printk(ST_DEB_MSG "%s: Compression state is %d.\n", name,
2469 (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0)));
2470
2471 /* Check if compression can be changed */
2472 if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) {
2473 DEBC(printk(ST_DEB_MSG "%s: Compression not supported.\n", name));
2474 return (-EIO);
2475 }
2476
2477 /* Do the change */
2478 if (state) {
2479 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK;
2480 if (STp->c_algo != 0)
2481 b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo;
2482 }
2483 else {
2484 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK;
2485 if (STp->c_algo != 0)
2486 b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */
2487 }
2488
2489 retval = write_mode_page(STp, COMPRESSION_PAGE, 0);
2490 if (retval) {
2491 DEBC(printk(ST_DEB_MSG "%s: Compression change failed.\n", name));
2492 return (-EIO);
2493 }
2494 DEBC(printk(ST_DEB_MSG "%s: Compression state changed to %d.\n",
2495 name, state));
2496
2497 STp->compression_changed = 1;
2498 return 0;
2499}
2500
2501
2502/* Process the load and unload commands (does unload if the load code is zero) */
2503static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code)
2504{
2505 int retval = (-EIO), timeout;
2506 DEB( char *name = tape_name(STp); )
2507 unsigned char cmd[MAX_COMMAND_SIZE];
2508 struct st_partstat *STps;
2509 struct st_request *SRpnt;
2510
2511 if (STp->ready != ST_READY && !load_code) {
2512 if (STp->ready == ST_NO_TAPE)
2513 return (-ENOMEDIUM);
2514 else
2515 return (-EIO);
2516 }
2517
2518 memset(cmd, 0, MAX_COMMAND_SIZE);
2519 cmd[0] = START_STOP;
2520 if (load_code)
2521 cmd[4] |= 1;
2522 /*
2523 * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A
2524 */
2525 if (load_code >= 1 + MT_ST_HPLOADER_OFFSET
2526 && load_code <= 6 + MT_ST_HPLOADER_OFFSET) {
2527 DEBC(printk(ST_DEB_MSG "%s: Enhanced %sload slot %2d.\n",
2528 name, (cmd[4]) ? "" : "un",
2529 load_code - MT_ST_HPLOADER_OFFSET));
2530 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */
2531 }
2532 if (STp->immediate) {
2533 cmd[1] = 1; /* Don't wait for completion */
2534 timeout = STp->device->request_queue->rq_timeout;
2535 }
2536 else
2537 timeout = STp->long_timeout;
2538
2539 DEBC(
2540 if (!load_code)
2541 printk(ST_DEB_MSG "%s: Unloading tape.\n", name);
2542 else
2543 printk(ST_DEB_MSG "%s: Loading tape.\n", name);
2544 );
2545
2546 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
2547 timeout, MAX_RETRIES, 1);
2548 if (!SRpnt)
2549 return (STp->buffer)->syscall_result;
2550
2551 retval = (STp->buffer)->syscall_result;
2552 st_release_request(SRpnt);
2553
2554 if (!retval) { /* SCSI command successful */
2555
2556 if (!load_code) {
2557 STp->rew_at_close = 0;
2558 STp->ready = ST_NO_TAPE;
2559 }
2560 else {
2561 STp->rew_at_close = STp->autorew_dev;
2562 retval = check_tape(STp, filp);
2563 if (retval > 0)
2564 retval = 0;
2565 }
2566 }
2567 else {
2568 STps = &(STp->ps[STp->partition]);
2569 STps->drv_file = STps->drv_block = (-1);
2570 }
2571
2572 return retval;
2573}
2574
2575#if DEBUG
2576#define ST_DEB_FORWARD 0
2577#define ST_DEB_BACKWARD 1
2578static void deb_space_print(char *name, int direction, char *units, unsigned char *cmd)
2579{
2580 s32 sc;
2581
2582 sc = cmd[2] & 0x80 ? 0xff000000 : 0;
2583 sc |= (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
2584 if (direction)
2585 sc = -sc;
2586 printk(ST_DEB_MSG "%s: Spacing tape %s over %d %s.\n", name,
2587 direction ? "backward" : "forward", sc, units);
2588}
2589#endif
2590
2591
2592/* Internal ioctl function */
2593static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg)
2594{
2595 int timeout;
2596 long ltmp;
2597 int ioctl_result;
2598 int chg_eof = 1;
2599 unsigned char cmd[MAX_COMMAND_SIZE];
2600 struct st_request *SRpnt;
2601 struct st_partstat *STps;
2602 int fileno, blkno, at_sm, undone;
2603 int datalen = 0, direction = DMA_NONE;
2604 char *name = tape_name(STp);
2605
2606 WARN_ON(STp->buffer->do_dio != 0);
2607 if (STp->ready != ST_READY) {
2608 if (STp->ready == ST_NO_TAPE)
2609 return (-ENOMEDIUM);
2610 else
2611 return (-EIO);
2612 }
2613 timeout = STp->long_timeout;
2614 STps = &(STp->ps[STp->partition]);
2615 fileno = STps->drv_file;
2616 blkno = STps->drv_block;
2617 at_sm = STps->at_sm;
2618
2619 memset(cmd, 0, MAX_COMMAND_SIZE);
2620 switch (cmd_in) {
2621 case MTFSFM:
2622 chg_eof = 0; /* Changed from the FSF after this */
2623 case MTFSF:
2624 cmd[0] = SPACE;
2625 cmd[1] = 0x01; /* Space FileMarks */
2626 cmd[2] = (arg >> 16);
2627 cmd[3] = (arg >> 8);
2628 cmd[4] = arg;
2629 DEBC(deb_space_print(name, ST_DEB_FORWARD, "filemarks", cmd);)
2630 if (fileno >= 0)
2631 fileno += arg;
2632 blkno = 0;
2633 at_sm &= (arg == 0);
2634 break;
2635 case MTBSFM:
2636 chg_eof = 0; /* Changed from the FSF after this */
2637 case MTBSF:
2638 cmd[0] = SPACE;
2639 cmd[1] = 0x01; /* Space FileMarks */
2640 ltmp = (-arg);
2641 cmd[2] = (ltmp >> 16);
2642 cmd[3] = (ltmp >> 8);
2643 cmd[4] = ltmp;
2644 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "filemarks", cmd);)
2645 if (fileno >= 0)
2646 fileno -= arg;
2647 blkno = (-1); /* We can't know the block number */
2648 at_sm &= (arg == 0);
2649 break;
2650 case MTFSR:
2651 cmd[0] = SPACE;
2652 cmd[1] = 0x00; /* Space Blocks */
2653 cmd[2] = (arg >> 16);
2654 cmd[3] = (arg >> 8);
2655 cmd[4] = arg;
2656 DEBC(deb_space_print(name, ST_DEB_FORWARD, "blocks", cmd);)
2657 if (blkno >= 0)
2658 blkno += arg;
2659 at_sm &= (arg == 0);
2660 break;
2661 case MTBSR:
2662 cmd[0] = SPACE;
2663 cmd[1] = 0x00; /* Space Blocks */
2664 ltmp = (-arg);
2665 cmd[2] = (ltmp >> 16);
2666 cmd[3] = (ltmp >> 8);
2667 cmd[4] = ltmp;
2668 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "blocks", cmd);)
2669 if (blkno >= 0)
2670 blkno -= arg;
2671 at_sm &= (arg == 0);
2672 break;
2673 case MTFSS:
2674 cmd[0] = SPACE;
2675 cmd[1] = 0x04; /* Space Setmarks */
2676 cmd[2] = (arg >> 16);
2677 cmd[3] = (arg >> 8);
2678 cmd[4] = arg;
2679 DEBC(deb_space_print(name, ST_DEB_FORWARD, "setmarks", cmd);)
2680 if (arg != 0) {
2681 blkno = fileno = (-1);
2682 at_sm = 1;
2683 }
2684 break;
2685 case MTBSS:
2686 cmd[0] = SPACE;
2687 cmd[1] = 0x04; /* Space Setmarks */
2688 ltmp = (-arg);
2689 cmd[2] = (ltmp >> 16);
2690 cmd[3] = (ltmp >> 8);
2691 cmd[4] = ltmp;
2692 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "setmarks", cmd);)
2693 if (arg != 0) {
2694 blkno = fileno = (-1);
2695 at_sm = 1;
2696 }
2697 break;
2698 case MTWEOF:
2699 case MTWEOFI:
2700 case MTWSM:
2701 if (STp->write_prot)
2702 return (-EACCES);
2703 cmd[0] = WRITE_FILEMARKS;
2704 if (cmd_in == MTWSM)
2705 cmd[1] = 2;
2706 if (cmd_in == MTWEOFI)
2707 cmd[1] |= 1;
2708 cmd[2] = (arg >> 16);
2709 cmd[3] = (arg >> 8);
2710 cmd[4] = arg;
2711 timeout = STp->device->request_queue->rq_timeout;
2712 DEBC(
2713 if (cmd_in != MTWSM)
2714 printk(ST_DEB_MSG "%s: Writing %d filemarks.\n", name,
2715 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
2716 else
2717 printk(ST_DEB_MSG "%s: Writing %d setmarks.\n", name,
2718 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
2719 )
2720 if (fileno >= 0)
2721 fileno += arg;
2722 blkno = 0;
2723 at_sm = (cmd_in == MTWSM);
2724 break;
2725 case MTREW:
2726 cmd[0] = REZERO_UNIT;
2727 if (STp->immediate) {
2728 cmd[1] = 1; /* Don't wait for completion */
2729 timeout = STp->device->request_queue->rq_timeout;
2730 }
2731 DEBC(printk(ST_DEB_MSG "%s: Rewinding tape.\n", name));
2732 fileno = blkno = at_sm = 0;
2733 break;
2734 case MTNOP:
2735 DEBC(printk(ST_DEB_MSG "%s: No op on tape.\n", name));
2736 return 0; /* Should do something ? */
2737 break;
2738 case MTRETEN:
2739 cmd[0] = START_STOP;
2740 if (STp->immediate) {
2741 cmd[1] = 1; /* Don't wait for completion */
2742 timeout = STp->device->request_queue->rq_timeout;
2743 }
2744 cmd[4] = 3;
2745 DEBC(printk(ST_DEB_MSG "%s: Retensioning tape.\n", name));
2746 fileno = blkno = at_sm = 0;
2747 break;
2748 case MTEOM:
2749 if (!STp->fast_mteom) {
2750 /* space to the end of tape */
2751 ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff);
2752 fileno = STps->drv_file;
2753 if (STps->eof >= ST_EOD_1)
2754 return 0;
2755 /* The next lines would hide the number of spaced FileMarks
2756 That's why I inserted the previous lines. I had no luck
2757 with detecting EOM with FSF, so we go now to EOM.
2758 Joerg Weule */
2759 } else
2760 fileno = (-1);
2761 cmd[0] = SPACE;
2762 cmd[1] = 3;
2763 DEBC(printk(ST_DEB_MSG "%s: Spacing to end of recorded medium.\n",
2764 name));
2765 blkno = -1;
2766 at_sm = 0;
2767 break;
2768 case MTERASE:
2769 if (STp->write_prot)
2770 return (-EACCES);
2771 cmd[0] = ERASE;
2772 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */
2773 if (STp->immediate) {
2774 cmd[1] |= 2; /* Don't wait for completion */
2775 timeout = STp->device->request_queue->rq_timeout;
2776 }
2777 else
2778 timeout = STp->long_timeout * 8;
2779
2780 DEBC(printk(ST_DEB_MSG "%s: Erasing tape.\n", name));
2781 fileno = blkno = at_sm = 0;
2782 break;
2783 case MTSETBLK: /* Set block length */
2784 case MTSETDENSITY: /* Set tape density */
2785 case MTSETDRVBUFFER: /* Set drive buffering */
2786 case SET_DENS_AND_BLK: /* Set density and block size */
2787 chg_eof = 0;
2788 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
2789 return (-EIO); /* Not allowed if data in buffer */
2790 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
2791 (arg & MT_ST_BLKSIZE_MASK) != 0 &&
2792 STp->max_block > 0 &&
2793 ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block ||
2794 (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) {
2795 printk(KERN_WARNING "%s: Illegal block size.\n", name);
2796 return (-EINVAL);
2797 }
2798 cmd[0] = MODE_SELECT;
2799 if ((STp->use_pf & USE_PF))
2800 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2801 cmd[4] = datalen = 12;
2802 direction = DMA_TO_DEVICE;
2803
2804 memset((STp->buffer)->b_data, 0, 12);
2805 if (cmd_in == MTSETDRVBUFFER)
2806 (STp->buffer)->b_data[2] = (arg & 7) << 4;
2807 else
2808 (STp->buffer)->b_data[2] =
2809 STp->drv_buffer << 4;
2810 (STp->buffer)->b_data[3] = 8; /* block descriptor length */
2811 if (cmd_in == MTSETDENSITY) {
2812 (STp->buffer)->b_data[4] = arg;
2813 STp->density_changed = 1; /* At least we tried ;-) */
2814 } else if (cmd_in == SET_DENS_AND_BLK)
2815 (STp->buffer)->b_data[4] = arg >> 24;
2816 else
2817 (STp->buffer)->b_data[4] = STp->density;
2818 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2819 ltmp = arg & MT_ST_BLKSIZE_MASK;
2820 if (cmd_in == MTSETBLK)
2821 STp->blksize_changed = 1; /* At least we tried ;-) */
2822 } else
2823 ltmp = STp->block_size;
2824 (STp->buffer)->b_data[9] = (ltmp >> 16);
2825 (STp->buffer)->b_data[10] = (ltmp >> 8);
2826 (STp->buffer)->b_data[11] = ltmp;
2827 timeout = STp->device->request_queue->rq_timeout;
2828 DEBC(
2829 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK)
2830 printk(ST_DEB_MSG
2831 "%s: Setting block size to %d bytes.\n", name,
2832 (STp->buffer)->b_data[9] * 65536 +
2833 (STp->buffer)->b_data[10] * 256 +
2834 (STp->buffer)->b_data[11]);
2835 if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK)
2836 printk(ST_DEB_MSG
2837 "%s: Setting density code to %x.\n", name,
2838 (STp->buffer)->b_data[4]);
2839 if (cmd_in == MTSETDRVBUFFER)
2840 printk(ST_DEB_MSG
2841 "%s: Setting drive buffer code to %d.\n", name,
2842 ((STp->buffer)->b_data[2] >> 4) & 7);
2843 )
2844 break;
2845 default:
2846 return (-ENOSYS);
2847 }
2848
2849 SRpnt = st_do_scsi(NULL, STp, cmd, datalen, direction,
2850 timeout, MAX_RETRIES, 1);
2851 if (!SRpnt)
2852 return (STp->buffer)->syscall_result;
2853
2854 ioctl_result = (STp->buffer)->syscall_result;
2855
2856 if (!ioctl_result) { /* SCSI command successful */
2857 st_release_request(SRpnt);
2858 SRpnt = NULL;
2859 STps->drv_block = blkno;
2860 STps->drv_file = fileno;
2861 STps->at_sm = at_sm;
2862
2863 if (cmd_in == MTBSFM)
2864 ioctl_result = st_int_ioctl(STp, MTFSF, 1);
2865 else if (cmd_in == MTFSFM)
2866 ioctl_result = st_int_ioctl(STp, MTBSF, 1);
2867
2868 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2869 STp->block_size = arg & MT_ST_BLKSIZE_MASK;
2870 if (STp->block_size != 0) {
2871 (STp->buffer)->buffer_blocks =
2872 (STp->buffer)->buffer_size / STp->block_size;
2873 }
2874 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
2875 if (cmd_in == SET_DENS_AND_BLK)
2876 STp->density = arg >> MT_ST_DENSITY_SHIFT;
2877 } else if (cmd_in == MTSETDRVBUFFER)
2878 STp->drv_buffer = (arg & 7);
2879 else if (cmd_in == MTSETDENSITY)
2880 STp->density = arg;
2881
2882 if (cmd_in == MTEOM)
2883 STps->eof = ST_EOD;
2884 else if (cmd_in == MTFSF)
2885 STps->eof = ST_FM;
2886 else if (chg_eof)
2887 STps->eof = ST_NOEOF;
2888
2889 if (cmd_in == MTWEOF || cmd_in == MTWEOFI)
2890 STps->rw = ST_IDLE; /* prevent automatic WEOF at close */
2891 } else { /* SCSI command was not completely successful. Don't return
2892 from this block without releasing the SCSI command block! */
2893 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
2894
2895 if (cmdstatp->flags & SENSE_EOM) {
2896 if (cmd_in != MTBSF && cmd_in != MTBSFM &&
2897 cmd_in != MTBSR && cmd_in != MTBSS)
2898 STps->eof = ST_EOM_OK;
2899 STps->drv_block = 0;
2900 }
2901
2902 if (cmdstatp->remainder_valid)
2903 undone = (int)cmdstatp->uremainder64;
2904 else
2905 undone = 0;
2906
2907 if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) &&
2908 cmdstatp->have_sense &&
2909 (cmdstatp->flags & SENSE_EOM)) {
2910 if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
2911 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) {
2912 ioctl_result = 0; /* EOF(s) written successfully at EOM */
2913 STps->eof = ST_NOEOF;
2914 } else { /* Writing EOF(s) failed */
2915 if (fileno >= 0)
2916 fileno -= undone;
2917 if (undone < arg)
2918 STps->eof = ST_NOEOF;
2919 }
2920 STps->drv_file = fileno;
2921 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) {
2922 if (fileno >= 0)
2923 STps->drv_file = fileno - undone;
2924 else
2925 STps->drv_file = fileno;
2926 STps->drv_block = -1;
2927 STps->eof = ST_NOEOF;
2928 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) {
2929 if (arg > 0 && undone < 0) /* Some drives get this wrong */
2930 undone = (-undone);
2931 if (STps->drv_file >= 0)
2932 STps->drv_file = fileno + undone;
2933 STps->drv_block = 0;
2934 STps->eof = ST_NOEOF;
2935 } else if (cmd_in == MTFSR) {
2936 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
2937 if (STps->drv_file >= 0)
2938 STps->drv_file++;
2939 STps->drv_block = 0;
2940 STps->eof = ST_FM;
2941 } else {
2942 if (blkno >= undone)
2943 STps->drv_block = blkno - undone;
2944 else
2945 STps->drv_block = (-1);
2946 STps->eof = ST_NOEOF;
2947 }
2948 } else if (cmd_in == MTBSR) {
2949 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
2950 STps->drv_file--;
2951 STps->drv_block = (-1);
2952 } else {
2953 if (arg > 0 && undone < 0) /* Some drives get this wrong */
2954 undone = (-undone);
2955 if (STps->drv_block >= 0)
2956 STps->drv_block = blkno + undone;
2957 }
2958 STps->eof = ST_NOEOF;
2959 } else if (cmd_in == MTEOM) {
2960 STps->drv_file = (-1);
2961 STps->drv_block = (-1);
2962 STps->eof = ST_EOD;
2963 } else if (cmd_in == MTSETBLK ||
2964 cmd_in == MTSETDENSITY ||
2965 cmd_in == MTSETDRVBUFFER ||
2966 cmd_in == SET_DENS_AND_BLK) {
2967 if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
2968 !(STp->use_pf & PF_TESTED)) {
2969 /* Try the other possible state of Page Format if not
2970 already tried */
2971 STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
2972 st_release_request(SRpnt);
2973 SRpnt = NULL;
2974 return st_int_ioctl(STp, cmd_in, arg);
2975 }
2976 } else if (chg_eof)
2977 STps->eof = ST_NOEOF;
2978
2979 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
2980 STps->eof = ST_EOD;
2981
2982 st_release_request(SRpnt);
2983 SRpnt = NULL;
2984 }
2985
2986 return ioctl_result;
2987}
2988
2989
2990/* Get the tape position. If bt == 2, arg points into a kernel space mt_loc
2991 structure. */
2992
2993static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition,
2994 int logical)
2995{
2996 int result;
2997 unsigned char scmd[MAX_COMMAND_SIZE];
2998 struct st_request *SRpnt;
2999 DEB( char *name = tape_name(STp); )
3000
3001 if (STp->ready != ST_READY)
3002 return (-EIO);
3003
3004 memset(scmd, 0, MAX_COMMAND_SIZE);
3005 if ((STp->device)->scsi_level < SCSI_2) {
3006 scmd[0] = QFA_REQUEST_BLOCK;
3007 scmd[4] = 3;
3008 } else {
3009 scmd[0] = READ_POSITION;
3010 if (!logical && !STp->scsi2_logical)
3011 scmd[1] = 1;
3012 }
3013 SRpnt = st_do_scsi(NULL, STp, scmd, 20, DMA_FROM_DEVICE,
3014 STp->device->request_queue->rq_timeout,
3015 MAX_READY_RETRIES, 1);
3016 if (!SRpnt)
3017 return (STp->buffer)->syscall_result;
3018
3019 if ((STp->buffer)->syscall_result != 0 ||
3020 (STp->device->scsi_level >= SCSI_2 &&
3021 ((STp->buffer)->b_data[0] & 4) != 0)) {
3022 *block = *partition = 0;
3023 DEBC(printk(ST_DEB_MSG "%s: Can't read tape position.\n", name));
3024 result = (-EIO);
3025 } else {
3026 result = 0;
3027 if ((STp->device)->scsi_level < SCSI_2) {
3028 *block = ((STp->buffer)->b_data[0] << 16)
3029 + ((STp->buffer)->b_data[1] << 8)
3030 + (STp->buffer)->b_data[2];
3031 *partition = 0;
3032 } else {
3033 *block = ((STp->buffer)->b_data[4] << 24)
3034 + ((STp->buffer)->b_data[5] << 16)
3035 + ((STp->buffer)->b_data[6] << 8)
3036 + (STp->buffer)->b_data[7];
3037 *partition = (STp->buffer)->b_data[1];
3038 if (((STp->buffer)->b_data[0] & 0x80) &&
3039 (STp->buffer)->b_data[1] == 0) /* BOP of partition 0 */
3040 STp->ps[0].drv_block = STp->ps[0].drv_file = 0;
3041 }
3042 DEBC(printk(ST_DEB_MSG "%s: Got tape pos. blk %d part %d.\n", name,
3043 *block, *partition));
3044 }
3045 st_release_request(SRpnt);
3046 SRpnt = NULL;
3047
3048 return result;
3049}
3050
3051
3052/* Set the tape block and partition. Negative partition means that only the
3053 block should be set in vendor specific way. */
3054static int set_location(struct scsi_tape *STp, unsigned int block, int partition,
3055 int logical)
3056{
3057 struct st_partstat *STps;
3058 int result, p;
3059 unsigned int blk;
3060 int timeout;
3061 unsigned char scmd[MAX_COMMAND_SIZE];
3062 struct st_request *SRpnt;
3063 DEB( char *name = tape_name(STp); )
3064
3065 if (STp->ready != ST_READY)
3066 return (-EIO);
3067 timeout = STp->long_timeout;
3068 STps = &(STp->ps[STp->partition]);
3069
3070 DEBC(printk(ST_DEB_MSG "%s: Setting block to %d and partition to %d.\n",
3071 name, block, partition));
3072 DEB(if (partition < 0)
3073 return (-EIO); )
3074
3075 /* Update the location at the partition we are leaving */
3076 if ((!STp->can_partitions && partition != 0) ||
3077 partition >= ST_NBR_PARTITIONS)
3078 return (-EINVAL);
3079 if (partition != STp->partition) {
3080 if (get_location(STp, &blk, &p, 1))
3081 STps->last_block_valid = 0;
3082 else {
3083 STps->last_block_valid = 1;
3084 STps->last_block_visited = blk;
3085 DEBC(printk(ST_DEB_MSG
3086 "%s: Visited block %d for partition %d saved.\n",
3087 name, blk, STp->partition));
3088 }
3089 }
3090
3091 memset(scmd, 0, MAX_COMMAND_SIZE);
3092 if ((STp->device)->scsi_level < SCSI_2) {
3093 scmd[0] = QFA_SEEK_BLOCK;
3094 scmd[2] = (block >> 16);
3095 scmd[3] = (block >> 8);
3096 scmd[4] = block;
3097 scmd[5] = 0;
3098 } else {
3099 scmd[0] = SEEK_10;
3100 scmd[3] = (block >> 24);
3101 scmd[4] = (block >> 16);
3102 scmd[5] = (block >> 8);
3103 scmd[6] = block;
3104 if (!logical && !STp->scsi2_logical)
3105 scmd[1] = 4;
3106 if (STp->partition != partition) {
3107 scmd[1] |= 2;
3108 scmd[8] = partition;
3109 DEBC(printk(ST_DEB_MSG
3110 "%s: Trying to change partition from %d to %d\n",
3111 name, STp->partition, partition));
3112 }
3113 }
3114 if (STp->immediate) {
3115 scmd[1] |= 1; /* Don't wait for completion */
3116 timeout = STp->device->request_queue->rq_timeout;
3117 }
3118
3119 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3120 timeout, MAX_READY_RETRIES, 1);
3121 if (!SRpnt)
3122 return (STp->buffer)->syscall_result;
3123
3124 STps->drv_block = STps->drv_file = (-1);
3125 STps->eof = ST_NOEOF;
3126 if ((STp->buffer)->syscall_result != 0) {
3127 result = (-EIO);
3128 if (STp->can_partitions &&
3129 (STp->device)->scsi_level >= SCSI_2 &&
3130 (p = find_partition(STp)) >= 0)
3131 STp->partition = p;
3132 } else {
3133 if (STp->can_partitions) {
3134 STp->partition = partition;
3135 STps = &(STp->ps[partition]);
3136 if (!STps->last_block_valid ||
3137 STps->last_block_visited != block) {
3138 STps->at_sm = 0;
3139 STps->rw = ST_IDLE;
3140 }
3141 } else
3142 STps->at_sm = 0;
3143 if (block == 0)
3144 STps->drv_block = STps->drv_file = 0;
3145 result = 0;
3146 }
3147
3148 st_release_request(SRpnt);
3149 SRpnt = NULL;
3150
3151 return result;
3152}
3153
3154
3155/* Find the current partition number for the drive status. Called from open and
3156 returns either partition number of negative error code. */
3157static int find_partition(struct scsi_tape *STp)
3158{
3159 int i, partition;
3160 unsigned int block;
3161
3162 if ((i = get_location(STp, &block, &partition, 1)) < 0)
3163 return i;
3164 if (partition >= ST_NBR_PARTITIONS)
3165 return (-EIO);
3166 return partition;
3167}
3168
3169
3170/* Change the partition if necessary */
3171static int switch_partition(struct scsi_tape *STp)
3172{
3173 struct st_partstat *STps;
3174
3175 if (STp->partition == STp->new_partition)
3176 return 0;
3177 STps = &(STp->ps[STp->new_partition]);
3178 if (!STps->last_block_valid)
3179 STps->last_block_visited = 0;
3180 return set_location(STp, STps->last_block_visited, STp->new_partition, 1);
3181}
3182
3183/* Functions for reading and writing the medium partition mode page. */
3184
3185#define PART_PAGE 0x11
3186#define PART_PAGE_FIXED_LENGTH 8
3187
3188#define PP_OFF_MAX_ADD_PARTS 2
3189#define PP_OFF_NBR_ADD_PARTS 3
3190#define PP_OFF_FLAGS 4
3191#define PP_OFF_PART_UNITS 6
3192#define PP_OFF_RESERVED 7
3193
3194#define PP_BIT_IDP 0x20
3195#define PP_MSK_PSUM_MB 0x10
3196
3197/* Get the number of partitions on the tape. As a side effect reads the
3198 mode page into the tape buffer. */
3199static int nbr_partitions(struct scsi_tape *STp)
3200{
3201 int result;
3202 DEB( char *name = tape_name(STp); )
3203
3204 if (STp->ready != ST_READY)
3205 return (-EIO);
3206
3207 result = read_mode_page(STp, PART_PAGE, 1);
3208
3209 if (result) {
3210 DEBC(printk(ST_DEB_MSG "%s: Can't read medium partition page.\n",
3211 name));
3212 result = (-EIO);
3213 } else {
3214 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH +
3215 PP_OFF_NBR_ADD_PARTS] + 1;
3216 DEBC(printk(ST_DEB_MSG "%s: Number of partitions %d.\n", name, result));
3217 }
3218
3219 return result;
3220}
3221
3222
3223/* Partition the tape into two partitions if size > 0 or one partition if
3224 size == 0.
3225
3226 The block descriptors are read and written because Sony SDT-7000 does not
3227 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
3228
3229 My HP C1533A drive returns only one partition size field. This is used to
3230 set the size of partition 1. There is no size field for the default partition.
3231 Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is
3232 used to set the size of partition 1 (this is what the SCSI-3 standard specifies).
3233 The following algorithm is used to accommodate both drives: if the number of
3234 partition size fields is greater than the maximum number of additional partitions
3235 in the mode page, the second field is used. Otherwise the first field is used.
3236
3237 For Seagate DDS drives the page length must be 8 when no partitions is defined
3238 and 10 when 1 partition is defined (information from Eric Lee Green). This is
3239 is acceptable also to some other old drives and enforced if the first partition
3240 size field is used for the first additional partition size.
3241 */
3242static int partition_tape(struct scsi_tape *STp, int size)
3243{
3244 char *name = tape_name(STp);
3245 int result;
3246 int pgo, psd_cnt, psdo;
3247 unsigned char *bp;
3248
3249 result = read_mode_page(STp, PART_PAGE, 0);
3250 if (result) {
3251 DEBC(printk(ST_DEB_MSG "%s: Can't read partition mode page.\n", name));
3252 return result;
3253 }
3254 /* The mode page is in the buffer. Let's modify it and write it. */
3255 bp = (STp->buffer)->b_data;
3256 pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH];
3257 DEBC(printk(ST_DEB_MSG "%s: Partition page length is %d bytes.\n",
3258 name, bp[pgo + MP_OFF_PAGE_LENGTH] + 2));
3259
3260 psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2;
3261 psdo = pgo + PART_PAGE_FIXED_LENGTH;
3262 if (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS]) {
3263 bp[psdo] = bp[psdo + 1] = 0xff; /* Rest of the tape */
3264 psdo += 2;
3265 }
3266 memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2);
3267
3268 DEBC(printk("%s: psd_cnt %d, max.parts %d, nbr_parts %d\n", name,
3269 psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS],
3270 bp[pgo + PP_OFF_NBR_ADD_PARTS]));
3271
3272 if (size <= 0) {
3273 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0;
3274 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS])
3275 bp[pgo + MP_OFF_PAGE_LENGTH] = 6;
3276 DEBC(printk(ST_DEB_MSG "%s: Formatting tape with one partition.\n",
3277 name));
3278 } else {
3279 bp[psdo] = (size >> 8) & 0xff;
3280 bp[psdo + 1] = size & 0xff;
3281 bp[pgo + 3] = 1;
3282 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8)
3283 bp[pgo + MP_OFF_PAGE_LENGTH] = 8;
3284 DEBC(printk(ST_DEB_MSG
3285 "%s: Formatting tape with two partitions (1 = %d MB).\n",
3286 name, size));
3287 }
3288 bp[pgo + PP_OFF_PART_UNITS] = 0;
3289 bp[pgo + PP_OFF_RESERVED] = 0;
3290 bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | PP_MSK_PSUM_MB;
3291
3292 result = write_mode_page(STp, PART_PAGE, 1);
3293 if (result) {
3294 printk(KERN_INFO "%s: Partitioning of tape failed.\n", name);
3295 result = (-EIO);
3296 }
3297
3298 return result;
3299}
3300
3301
3302
3303/* The ioctl command */
3304static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3305{
3306 int i, cmd_nr, cmd_type, bt;
3307 int retval = 0;
3308 unsigned int blk;
3309 struct scsi_tape *STp = file->private_data;
3310 struct st_modedef *STm;
3311 struct st_partstat *STps;
3312 char *name = tape_name(STp);
3313 void __user *p = (void __user *)arg;
3314
3315 if (mutex_lock_interruptible(&STp->lock))
3316 return -ERESTARTSYS;
3317
3318 DEB(
3319 if (debugging && !STp->in_use) {
3320 printk(ST_DEB_MSG "%s: Incorrect device.\n", name);
3321 retval = (-EIO);
3322 goto out;
3323 } ) /* end DEB */
3324
3325 STm = &(STp->modes[STp->current_mode]);
3326 STps = &(STp->ps[STp->partition]);
3327
3328 /*
3329 * If we are in the middle of error recovery, don't let anyone
3330 * else try and use this device. Also, if error recovery fails, it
3331 * may try and take the device offline, in which case all further
3332 * access to the device is prohibited.
3333 */
3334 retval = scsi_nonblockable_ioctl(STp->device, cmd_in, p,
3335 file->f_flags & O_NDELAY);
3336 if (!scsi_block_when_processing_errors(STp->device) || retval != -ENODEV)
3337 goto out;
3338 retval = 0;
3339
3340 cmd_type = _IOC_TYPE(cmd_in);
3341 cmd_nr = _IOC_NR(cmd_in);
3342
3343 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
3344 struct mtop mtc;
3345
3346 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
3347 retval = (-EINVAL);
3348 goto out;
3349 }
3350
3351 i = copy_from_user(&mtc, p, sizeof(struct mtop));
3352 if (i) {
3353 retval = (-EFAULT);
3354 goto out;
3355 }
3356
3357 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
3358 printk(KERN_WARNING
3359 "%s: MTSETDRVBUFFER only allowed for root.\n", name);
3360 retval = (-EPERM);
3361 goto out;
3362 }
3363 if (!STm->defined &&
3364 (mtc.mt_op != MTSETDRVBUFFER &&
3365 (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
3366 retval = (-ENXIO);
3367 goto out;
3368 }
3369
3370 if (!STp->pos_unknown) {
3371
3372 if (STps->eof == ST_FM_HIT) {
3373 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3374 mtc.mt_op == MTEOM) {
3375 mtc.mt_count -= 1;
3376 if (STps->drv_file >= 0)
3377 STps->drv_file += 1;
3378 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
3379 mtc.mt_count += 1;
3380 if (STps->drv_file >= 0)
3381 STps->drv_file += 1;
3382 }
3383 }
3384
3385 if (mtc.mt_op == MTSEEK) {
3386 /* Old position must be restored if partition will be
3387 changed */
3388 i = !STp->can_partitions ||
3389 (STp->new_partition != STp->partition);
3390 } else {
3391 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3392 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
3393 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
3394 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3395 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
3396 mtc.mt_op == MTCOMPRESSION;
3397 }
3398 i = flush_buffer(STp, i);
3399 if (i < 0) {
3400 retval = i;
3401 goto out;
3402 }
3403 if (STps->rw == ST_WRITING &&
3404 (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3405 mtc.mt_op == MTSEEK ||
3406 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) {
3407 i = st_int_ioctl(STp, MTWEOF, 1);
3408 if (i < 0) {
3409 retval = i;
3410 goto out;
3411 }
3412 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)
3413 mtc.mt_count++;
3414 STps->rw = ST_IDLE;
3415 }
3416
3417 } else {
3418 /*
3419 * If there was a bus reset, block further access
3420 * to this device. If the user wants to rewind the tape,
3421 * then reset the flag and allow access again.
3422 */
3423 if (mtc.mt_op != MTREW &&
3424 mtc.mt_op != MTOFFL &&
3425 mtc.mt_op != MTRETEN &&
3426 mtc.mt_op != MTERASE &&
3427 mtc.mt_op != MTSEEK &&
3428 mtc.mt_op != MTEOM) {
3429 retval = (-EIO);
3430 goto out;
3431 }
3432 reset_state(STp);
3433 /* remove this when the midlevel properly clears was_reset */
3434 STp->device->was_reset = 0;
3435 }
3436
3437 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
3438 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM &&
3439 mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART)
3440 STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */
3441
3442 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
3443 do_door_lock(STp, 0); /* Ignore result! */
3444
3445 if (mtc.mt_op == MTSETDRVBUFFER &&
3446 (mtc.mt_count & MT_ST_OPTIONS) != 0) {
3447 retval = st_set_options(STp, mtc.mt_count);
3448 goto out;
3449 }
3450
3451 if (mtc.mt_op == MTSETPART) {
3452 if (!STp->can_partitions ||
3453 mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) {
3454 retval = (-EINVAL);
3455 goto out;
3456 }
3457 if (mtc.mt_count >= STp->nbr_partitions &&
3458 (STp->nbr_partitions = nbr_partitions(STp)) < 0) {
3459 retval = (-EIO);
3460 goto out;
3461 }
3462 if (mtc.mt_count >= STp->nbr_partitions) {
3463 retval = (-EINVAL);
3464 goto out;
3465 }
3466 STp->new_partition = mtc.mt_count;
3467 retval = 0;
3468 goto out;
3469 }
3470
3471 if (mtc.mt_op == MTMKPART) {
3472 if (!STp->can_partitions) {
3473 retval = (-EINVAL);
3474 goto out;
3475 }
3476 if ((i = st_int_ioctl(STp, MTREW, 0)) < 0 ||
3477 (i = partition_tape(STp, mtc.mt_count)) < 0) {
3478 retval = i;
3479 goto out;
3480 }
3481 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3482 STp->ps[i].rw = ST_IDLE;
3483 STp->ps[i].at_sm = 0;
3484 STp->ps[i].last_block_valid = 0;
3485 }
3486 STp->partition = STp->new_partition = 0;
3487 STp->nbr_partitions = 1; /* Bad guess ?-) */
3488 STps->drv_block = STps->drv_file = 0;
3489 retval = 0;
3490 goto out;
3491 }
3492
3493 if (mtc.mt_op == MTSEEK) {
3494 i = set_location(STp, mtc.mt_count, STp->new_partition, 0);
3495 if (!STp->can_partitions)
3496 STp->ps[0].rw = ST_IDLE;
3497 retval = i;
3498 goto out;
3499 }
3500
3501 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) {
3502 retval = do_load_unload(STp, file, 0);
3503 goto out;
3504 }
3505
3506 if (mtc.mt_op == MTLOAD) {
3507 retval = do_load_unload(STp, file, max(1, mtc.mt_count));
3508 goto out;
3509 }
3510
3511 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
3512 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
3513 goto out;
3514 }
3515
3516 if (STp->can_partitions && STp->ready == ST_READY &&
3517 (i = switch_partition(STp)) < 0) {
3518 retval = i;
3519 goto out;
3520 }
3521
3522 if (mtc.mt_op == MTCOMPRESSION)
3523 retval = st_compression(STp, (mtc.mt_count & 1));
3524 else
3525 retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count);
3526 goto out;
3527 }
3528 if (!STm->defined) {
3529 retval = (-ENXIO);
3530 goto out;
3531 }
3532
3533 if ((i = flush_buffer(STp, 0)) < 0) {
3534 retval = i;
3535 goto out;
3536 }
3537 if (STp->can_partitions &&
3538 (i = switch_partition(STp)) < 0) {
3539 retval = i;
3540 goto out;
3541 }
3542
3543 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
3544 struct mtget mt_status;
3545
3546 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
3547 retval = (-EINVAL);
3548 goto out;
3549 }
3550
3551 mt_status.mt_type = STp->tape_type;
3552 mt_status.mt_dsreg =
3553 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
3554 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
3555 mt_status.mt_blkno = STps->drv_block;
3556 mt_status.mt_fileno = STps->drv_file;
3557 if (STp->block_size != 0) {
3558 if (STps->rw == ST_WRITING)
3559 mt_status.mt_blkno +=
3560 (STp->buffer)->buffer_bytes / STp->block_size;
3561 else if (STps->rw == ST_READING)
3562 mt_status.mt_blkno -=
3563 ((STp->buffer)->buffer_bytes +
3564 STp->block_size - 1) / STp->block_size;
3565 }
3566
3567 mt_status.mt_gstat = 0;
3568 if (STp->drv_write_prot)
3569 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
3570 if (mt_status.mt_blkno == 0) {
3571 if (mt_status.mt_fileno == 0)
3572 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
3573 else
3574 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
3575 }
3576 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT);
3577 mt_status.mt_resid = STp->partition;
3578 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
3579 mt_status.mt_gstat |= GMT_EOT(0xffffffff);
3580 else if (STps->eof >= ST_EOM_OK)
3581 mt_status.mt_gstat |= GMT_EOD(0xffffffff);
3582 if (STp->density == 1)
3583 mt_status.mt_gstat |= GMT_D_800(0xffffffff);
3584 else if (STp->density == 2)
3585 mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
3586 else if (STp->density == 3)
3587 mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
3588 if (STp->ready == ST_READY)
3589 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
3590 if (STp->ready == ST_NO_TAPE)
3591 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
3592 if (STps->at_sm)
3593 mt_status.mt_gstat |= GMT_SM(0xffffffff);
3594 if (STm->do_async_writes ||
3595 (STm->do_buffer_writes && STp->block_size != 0) ||
3596 STp->drv_buffer != 0)
3597 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
3598 if (STp->cleaning_req)
3599 mt_status.mt_gstat |= GMT_CLN(0xffffffff);
3600
3601 i = copy_to_user(p, &mt_status, sizeof(struct mtget));
3602 if (i) {
3603 retval = (-EFAULT);
3604 goto out;
3605 }
3606
3607 STp->recover_reg = 0; /* Clear after read */
3608 retval = 0;
3609 goto out;
3610 } /* End of MTIOCGET */
3611 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
3612 struct mtpos mt_pos;
3613 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
3614 retval = (-EINVAL);
3615 goto out;
3616 }
3617 if ((i = get_location(STp, &blk, &bt, 0)) < 0) {
3618 retval = i;
3619 goto out;
3620 }
3621 mt_pos.mt_blkno = blk;
3622 i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
3623 if (i)
3624 retval = (-EFAULT);
3625 goto out;
3626 }
3627 mutex_unlock(&STp->lock);
3628 switch (cmd_in) {
3629 case SCSI_IOCTL_GET_IDLUN:
3630 case SCSI_IOCTL_GET_BUS_NUMBER:
3631 break;
3632 default:
3633 if ((cmd_in == SG_IO ||
3634 cmd_in == SCSI_IOCTL_SEND_COMMAND ||
3635 cmd_in == CDROM_SEND_PACKET) &&
3636 !capable(CAP_SYS_RAWIO))
3637 i = -EPERM;
3638 else
3639 i = scsi_cmd_ioctl(STp->disk->queue, STp->disk,
3640 file->f_mode, cmd_in, p);
3641 if (i != -ENOTTY)
3642 return i;
3643 break;
3644 }
3645 retval = scsi_ioctl(STp->device, cmd_in, p);
3646 if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) { /* unload */
3647 STp->rew_at_close = 0;
3648 STp->ready = ST_NO_TAPE;
3649 }
3650 return retval;
3651
3652 out:
3653 mutex_unlock(&STp->lock);
3654 return retval;
3655}
3656
3657#ifdef CONFIG_COMPAT
3658static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
3659{
3660 struct scsi_tape *STp = file->private_data;
3661 struct scsi_device *sdev = STp->device;
3662 int ret = -ENOIOCTLCMD;
3663 if (sdev->host->hostt->compat_ioctl) {
3664
3665 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
3666
3667 }
3668 return ret;
3669}
3670#endif
3671
3672
3673
3674/* Try to allocate a new tape buffer. Calling function must not hold
3675 dev_arr_lock. */
3676static struct st_buffer *new_tape_buffer(int need_dma, int max_sg)
3677{
3678 struct st_buffer *tb;
3679
3680 tb = kzalloc(sizeof(struct st_buffer), GFP_ATOMIC);
3681 if (!tb) {
3682 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
3683 return NULL;
3684 }
3685 tb->frp_segs = 0;
3686 tb->use_sg = max_sg;
3687 tb->dma = need_dma;
3688 tb->buffer_size = 0;
3689
3690 tb->reserved_pages = kzalloc(max_sg * sizeof(struct page *),
3691 GFP_ATOMIC);
3692 if (!tb->reserved_pages) {
3693 kfree(tb);
3694 return NULL;
3695 }
3696
3697 return tb;
3698}
3699
3700
3701/* Try to allocate enough space in the tape buffer */
3702#define ST_MAX_ORDER 6
3703
3704static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma)
3705{
3706 int segs, nbr, max_segs, b_size, order, got;
3707 gfp_t priority;
3708
3709 if (new_size <= STbuffer->buffer_size)
3710 return 1;
3711
3712 if (STbuffer->buffer_size <= PAGE_SIZE)
3713 normalize_buffer(STbuffer); /* Avoid extra segment */
3714
3715 max_segs = STbuffer->use_sg;
3716 nbr = max_segs - STbuffer->frp_segs;
3717 if (nbr <= 0)
3718 return 0;
3719
3720 priority = GFP_KERNEL | __GFP_NOWARN;
3721 if (need_dma)
3722 priority |= GFP_DMA;
3723
3724 if (STbuffer->cleared)
3725 priority |= __GFP_ZERO;
3726
3727 if (STbuffer->frp_segs) {
3728 order = STbuffer->reserved_page_order;
3729 b_size = PAGE_SIZE << order;
3730 } else {
3731 for (b_size = PAGE_SIZE, order = 0;
3732 order < ST_MAX_ORDER &&
3733 max_segs * (PAGE_SIZE << order) < new_size;
3734 order++, b_size *= 2)
3735 ; /* empty */
3736 STbuffer->reserved_page_order = order;
3737 }
3738 if (max_segs * (PAGE_SIZE << order) < new_size) {
3739 if (order == ST_MAX_ORDER)
3740 return 0;
3741 normalize_buffer(STbuffer);
3742 return enlarge_buffer(STbuffer, new_size, need_dma);
3743 }
3744
3745 for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size;
3746 segs < max_segs && got < new_size;) {
3747 struct page *page;
3748
3749 page = alloc_pages(priority, order);
3750 if (!page) {
3751 DEB(STbuffer->buffer_size = got);
3752 normalize_buffer(STbuffer);
3753 return 0;
3754 }
3755
3756 STbuffer->frp_segs += 1;
3757 got += b_size;
3758 STbuffer->buffer_size = got;
3759 STbuffer->reserved_pages[segs] = page;
3760 segs++;
3761 }
3762 STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
3763
3764 return 1;
3765}
3766
3767
3768/* Make sure that no data from previous user is in the internal buffer */
3769static void clear_buffer(struct st_buffer * st_bp)
3770{
3771 int i;
3772
3773 for (i=0; i < st_bp->frp_segs; i++)
3774 memset(page_address(st_bp->reserved_pages[i]), 0,
3775 PAGE_SIZE << st_bp->reserved_page_order);
3776 st_bp->cleared = 1;
3777}
3778
3779
3780/* Release the extra buffer */
3781static void normalize_buffer(struct st_buffer * STbuffer)
3782{
3783 int i, order = STbuffer->reserved_page_order;
3784
3785 for (i = 0; i < STbuffer->frp_segs; i++) {
3786 __free_pages(STbuffer->reserved_pages[i], order);
3787 STbuffer->buffer_size -= (PAGE_SIZE << order);
3788 }
3789 STbuffer->frp_segs = 0;
3790 STbuffer->sg_segs = 0;
3791 STbuffer->reserved_page_order = 0;
3792 STbuffer->map_data.offset = 0;
3793}
3794
3795
3796/* Move data from the user buffer to the tape buffer. Returns zero (success) or
3797 negative error code. */
3798static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
3799{
3800 int i, cnt, res, offset;
3801 int length = PAGE_SIZE << st_bp->reserved_page_order;
3802
3803 for (i = 0, offset = st_bp->buffer_bytes;
3804 i < st_bp->frp_segs && offset >= length; i++)
3805 offset -= length;
3806 if (i == st_bp->frp_segs) { /* Should never happen */
3807 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
3808 return (-EIO);
3809 }
3810 for (; i < st_bp->frp_segs && do_count > 0; i++) {
3811 struct page *page = st_bp->reserved_pages[i];
3812 cnt = length - offset < do_count ? length - offset : do_count;
3813 res = copy_from_user(page_address(page) + offset, ubp, cnt);
3814 if (res)
3815 return (-EFAULT);
3816 do_count -= cnt;
3817 st_bp->buffer_bytes += cnt;
3818 ubp += cnt;
3819 offset = 0;
3820 }
3821 if (do_count) /* Should never happen */
3822 return (-EIO);
3823
3824 return 0;
3825}
3826
3827
3828/* Move data from the tape buffer to the user buffer. Returns zero (success) or
3829 negative error code. */
3830static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
3831{
3832 int i, cnt, res, offset;
3833 int length = PAGE_SIZE << st_bp->reserved_page_order;
3834
3835 for (i = 0, offset = st_bp->read_pointer;
3836 i < st_bp->frp_segs && offset >= length; i++)
3837 offset -= length;
3838 if (i == st_bp->frp_segs) { /* Should never happen */
3839 printk(KERN_WARNING "st: from_buffer offset overflow.\n");
3840 return (-EIO);
3841 }
3842 for (; i < st_bp->frp_segs && do_count > 0; i++) {
3843 struct page *page = st_bp->reserved_pages[i];
3844 cnt = length - offset < do_count ? length - offset : do_count;
3845 res = copy_to_user(ubp, page_address(page) + offset, cnt);
3846 if (res)
3847 return (-EFAULT);
3848 do_count -= cnt;
3849 st_bp->buffer_bytes -= cnt;
3850 st_bp->read_pointer += cnt;
3851 ubp += cnt;
3852 offset = 0;
3853 }
3854 if (do_count) /* Should never happen */
3855 return (-EIO);
3856
3857 return 0;
3858}
3859
3860
3861/* Move data towards start of buffer */
3862static void move_buffer_data(struct st_buffer * st_bp, int offset)
3863{
3864 int src_seg, dst_seg, src_offset = 0, dst_offset;
3865 int count, total;
3866 int length = PAGE_SIZE << st_bp->reserved_page_order;
3867
3868 if (offset == 0)
3869 return;
3870
3871 total=st_bp->buffer_bytes - offset;
3872 for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) {
3873 src_offset = offset;
3874 if (src_offset < length)
3875 break;
3876 offset -= length;
3877 }
3878
3879 st_bp->buffer_bytes = st_bp->read_pointer = total;
3880 for (dst_seg=dst_offset=0; total > 0; ) {
3881 struct page *dpage = st_bp->reserved_pages[dst_seg];
3882 struct page *spage = st_bp->reserved_pages[src_seg];
3883
3884 count = min(length - dst_offset, length - src_offset);
3885 memmove(page_address(dpage) + dst_offset,
3886 page_address(spage) + src_offset, count);
3887 src_offset += count;
3888 if (src_offset >= length) {
3889 src_seg++;
3890 src_offset = 0;
3891 }
3892 dst_offset += count;
3893 if (dst_offset >= length) {
3894 dst_seg++;
3895 dst_offset = 0;
3896 }
3897 total -= count;
3898 }
3899}
3900
3901/* Validate the options from command line or module parameters */
3902static void validate_options(void)
3903{
3904 if (buffer_kbs > 0)
3905 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE;
3906 if (max_sg_segs >= ST_FIRST_SG)
3907 st_max_sg_segs = max_sg_segs;
3908}
3909
3910#ifndef MODULE
3911/* Set the boot options. Syntax is defined in Documenation/scsi/st.txt.
3912 */
3913static int __init st_setup(char *str)
3914{
3915 int i, len, ints[5];
3916 char *stp;
3917
3918 stp = get_options(str, ARRAY_SIZE(ints), ints);
3919
3920 if (ints[0] > 0) {
3921 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
3922 if (parms[i].val)
3923 *parms[i].val = ints[i + 1];
3924 } else {
3925 while (stp != NULL) {
3926 for (i = 0; i < ARRAY_SIZE(parms); i++) {
3927 len = strlen(parms[i].name);
3928 if (!strncmp(stp, parms[i].name, len) &&
3929 (*(stp + len) == ':' || *(stp + len) == '=')) {
3930 if (parms[i].val)
3931 *parms[i].val =
3932 simple_strtoul(stp + len + 1, NULL, 0);
3933 else
3934 printk(KERN_WARNING "st: Obsolete parameter %s\n",
3935 parms[i].name);
3936 break;
3937 }
3938 }
3939 if (i >= ARRAY_SIZE(parms))
3940 printk(KERN_WARNING "st: invalid parameter in '%s'\n",
3941 stp);
3942 stp = strchr(stp, ',');
3943 if (stp)
3944 stp++;
3945 }
3946 }
3947
3948 validate_options();
3949
3950 return 1;
3951}
3952
3953__setup("st=", st_setup);
3954
3955#endif
3956
3957static const struct file_operations st_fops =
3958{
3959 .owner = THIS_MODULE,
3960 .read = st_read,
3961 .write = st_write,
3962 .unlocked_ioctl = st_ioctl,
3963#ifdef CONFIG_COMPAT
3964 .compat_ioctl = st_compat_ioctl,
3965#endif
3966 .open = st_open,
3967 .flush = st_flush,
3968 .release = st_release,
3969 .llseek = noop_llseek,
3970};
3971
3972static int st_probe(struct device *dev)
3973{
3974 struct scsi_device *SDp = to_scsi_device(dev);
3975 struct gendisk *disk = NULL;
3976 struct cdev *cdev = NULL;
3977 struct scsi_tape *tpnt = NULL;
3978 struct st_modedef *STm;
3979 struct st_partstat *STps;
3980 struct st_buffer *buffer;
3981 int i, j, mode, dev_num, error;
3982 char *stp;
3983
3984 if (SDp->type != TYPE_TAPE)
3985 return -ENODEV;
3986 if ((stp = st_incompatible(SDp))) {
3987 sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n");
3988 printk(KERN_INFO "st: The suggested driver is %s.\n", stp);
3989 return -ENODEV;
3990 }
3991
3992 i = queue_max_segments(SDp->request_queue);
3993 if (st_max_sg_segs < i)
3994 i = st_max_sg_segs;
3995 buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i);
3996 if (buffer == NULL) {
3997 printk(KERN_ERR
3998 "st: Can't allocate new tape buffer. Device not attached.\n");
3999 goto out;
4000 }
4001
4002 disk = alloc_disk(1);
4003 if (!disk) {
4004 printk(KERN_ERR "st: out of memory. Device not attached.\n");
4005 goto out_buffer_free;
4006 }
4007
4008 write_lock(&st_dev_arr_lock);
4009 if (st_nr_dev >= st_dev_max) {
4010 struct scsi_tape **tmp_da;
4011 int tmp_dev_max;
4012
4013 tmp_dev_max = max(st_nr_dev * 2, 8);
4014 if (tmp_dev_max > ST_MAX_TAPES)
4015 tmp_dev_max = ST_MAX_TAPES;
4016 if (tmp_dev_max <= st_nr_dev) {
4017 write_unlock(&st_dev_arr_lock);
4018 printk(KERN_ERR "st: Too many tape devices (max. %d).\n",
4019 ST_MAX_TAPES);
4020 goto out_put_disk;
4021 }
4022
4023 tmp_da = kzalloc(tmp_dev_max * sizeof(struct scsi_tape *), GFP_ATOMIC);
4024 if (tmp_da == NULL) {
4025 write_unlock(&st_dev_arr_lock);
4026 printk(KERN_ERR "st: Can't extend device array.\n");
4027 goto out_put_disk;
4028 }
4029
4030 if (scsi_tapes != NULL) {
4031 memcpy(tmp_da, scsi_tapes,
4032 st_dev_max * sizeof(struct scsi_tape *));
4033 kfree(scsi_tapes);
4034 }
4035 scsi_tapes = tmp_da;
4036
4037 st_dev_max = tmp_dev_max;
4038 }
4039
4040 for (i = 0; i < st_dev_max; i++)
4041 if (scsi_tapes[i] == NULL)
4042 break;
4043 if (i >= st_dev_max)
4044 panic("scsi_devices corrupt (st)");
4045
4046 tpnt = kzalloc(sizeof(struct scsi_tape), GFP_ATOMIC);
4047 if (tpnt == NULL) {
4048 write_unlock(&st_dev_arr_lock);
4049 printk(KERN_ERR "st: Can't allocate device descriptor.\n");
4050 goto out_put_disk;
4051 }
4052 kref_init(&tpnt->kref);
4053 tpnt->disk = disk;
4054 sprintf(disk->disk_name, "st%d", i);
4055 disk->private_data = &tpnt->driver;
4056 disk->queue = SDp->request_queue;
4057 tpnt->driver = &st_template;
4058 scsi_tapes[i] = tpnt;
4059 dev_num = i;
4060
4061 tpnt->device = SDp;
4062 if (SDp->scsi_level <= 2)
4063 tpnt->tape_type = MT_ISSCSI1;
4064 else
4065 tpnt->tape_type = MT_ISSCSI2;
4066
4067 tpnt->buffer = buffer;
4068 tpnt->buffer->last_SRpnt = NULL;
4069
4070 tpnt->inited = 0;
4071 tpnt->dirty = 0;
4072 tpnt->in_use = 0;
4073 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
4074 tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
4075 tpnt->use_pf = (SDp->scsi_level >= SCSI_2);
4076 tpnt->density = 0;
4077 tpnt->do_auto_lock = ST_AUTO_LOCK;
4078 tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */
4079 tpnt->can_partitions = 0;
4080 tpnt->two_fm = ST_TWO_FM;
4081 tpnt->fast_mteom = ST_FAST_MTEOM;
4082 tpnt->scsi2_logical = ST_SCSI2LOGICAL;
4083 tpnt->sili = ST_SILI;
4084 tpnt->immediate = ST_NOWAIT;
4085 tpnt->default_drvbuffer = 0xff; /* No forced buffering */
4086 tpnt->partition = 0;
4087 tpnt->new_partition = 0;
4088 tpnt->nbr_partitions = 0;
4089 blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT);
4090 tpnt->long_timeout = ST_LONG_TIMEOUT;
4091 tpnt->try_dio = try_direct_io && !SDp->host->unchecked_isa_dma;
4092
4093 for (i = 0; i < ST_NBR_MODES; i++) {
4094 STm = &(tpnt->modes[i]);
4095 STm->defined = 0;
4096 STm->sysv = ST_SYSV;
4097 STm->defaults_for_writes = 0;
4098 STm->do_async_writes = ST_ASYNC_WRITES;
4099 STm->do_buffer_writes = ST_BUFFER_WRITES;
4100 STm->do_read_ahead = ST_READ_AHEAD;
4101 STm->default_compression = ST_DONT_TOUCH;
4102 STm->default_blksize = (-1); /* No forced size */
4103 STm->default_density = (-1); /* No forced density */
4104 }
4105
4106 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
4107 STps = &(tpnt->ps[i]);
4108 STps->rw = ST_IDLE;
4109 STps->eof = ST_NOEOF;
4110 STps->at_sm = 0;
4111 STps->last_block_valid = 0;
4112 STps->drv_block = (-1);
4113 STps->drv_file = (-1);
4114 }
4115
4116 tpnt->current_mode = 0;
4117 tpnt->modes[0].defined = 1;
4118
4119 tpnt->density_changed = tpnt->compression_changed =
4120 tpnt->blksize_changed = 0;
4121 mutex_init(&tpnt->lock);
4122
4123 st_nr_dev++;
4124 write_unlock(&st_dev_arr_lock);
4125
4126 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4127 STm = &(tpnt->modes[mode]);
4128 for (j=0; j < 2; j++) {
4129 cdev = cdev_alloc();
4130 if (!cdev) {
4131 printk(KERN_ERR
4132 "st%d: out of memory. Device not attached.\n",
4133 dev_num);
4134 goto out_free_tape;
4135 }
4136 cdev->owner = THIS_MODULE;
4137 cdev->ops = &st_fops;
4138
4139 error = cdev_add(cdev,
4140 MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, j)),
4141 1);
4142 if (error) {
4143 printk(KERN_ERR "st%d: Can't add %s-rewind mode %d\n",
4144 dev_num, j ? "non" : "auto", mode);
4145 printk(KERN_ERR "st%d: Device not attached.\n", dev_num);
4146 goto out_free_tape;
4147 }
4148 STm->cdevs[j] = cdev;
4149
4150 }
4151 error = do_create_class_files(tpnt, dev_num, mode);
4152 if (error)
4153 goto out_free_tape;
4154 }
4155
4156 sdev_printk(KERN_NOTICE, SDp,
4157 "Attached scsi tape %s\n", tape_name(tpnt));
4158 sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
4159 tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
4160 queue_dma_alignment(SDp->request_queue) + 1);
4161
4162 return 0;
4163
4164out_free_tape:
4165 for (mode=0; mode < ST_NBR_MODES; mode++) {
4166 STm = &(tpnt->modes[mode]);
4167 sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
4168 "tape");
4169 for (j=0; j < 2; j++) {
4170 if (STm->cdevs[j]) {
4171 if (cdev == STm->cdevs[j])
4172 cdev = NULL;
4173 device_destroy(st_sysfs_class,
4174 MKDEV(SCSI_TAPE_MAJOR,
4175 TAPE_MINOR(i, mode, j)));
4176 cdev_del(STm->cdevs[j]);
4177 }
4178 }
4179 }
4180 if (cdev)
4181 cdev_del(cdev);
4182 write_lock(&st_dev_arr_lock);
4183 scsi_tapes[dev_num] = NULL;
4184 st_nr_dev--;
4185 write_unlock(&st_dev_arr_lock);
4186out_put_disk:
4187 put_disk(disk);
4188 kfree(tpnt);
4189out_buffer_free:
4190 kfree(buffer);
4191out:
4192 return -ENODEV;
4193};
4194
4195
4196static int st_remove(struct device *dev)
4197{
4198 struct scsi_device *SDp = to_scsi_device(dev);
4199 struct scsi_tape *tpnt;
4200 int i, j, mode;
4201
4202 write_lock(&st_dev_arr_lock);
4203 for (i = 0; i < st_dev_max; i++) {
4204 tpnt = scsi_tapes[i];
4205 if (tpnt != NULL && tpnt->device == SDp) {
4206 scsi_tapes[i] = NULL;
4207 st_nr_dev--;
4208 write_unlock(&st_dev_arr_lock);
4209 sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
4210 "tape");
4211 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4212 for (j=0; j < 2; j++) {
4213 device_destroy(st_sysfs_class,
4214 MKDEV(SCSI_TAPE_MAJOR,
4215 TAPE_MINOR(i, mode, j)));
4216 cdev_del(tpnt->modes[mode].cdevs[j]);
4217 tpnt->modes[mode].cdevs[j] = NULL;
4218 }
4219 }
4220
4221 mutex_lock(&st_ref_mutex);
4222 kref_put(&tpnt->kref, scsi_tape_release);
4223 mutex_unlock(&st_ref_mutex);
4224 return 0;
4225 }
4226 }
4227
4228 write_unlock(&st_dev_arr_lock);
4229 return 0;
4230}
4231
4232/**
4233 * scsi_tape_release - Called to free the Scsi_Tape structure
4234 * @kref: pointer to embedded kref
4235 *
4236 * st_ref_mutex must be held entering this routine. Because it is
4237 * called on last put, you should always use the scsi_tape_get()
4238 * scsi_tape_put() helpers which manipulate the semaphore directly
4239 * and never do a direct kref_put().
4240 **/
4241static void scsi_tape_release(struct kref *kref)
4242{
4243 struct scsi_tape *tpnt = to_scsi_tape(kref);
4244 struct gendisk *disk = tpnt->disk;
4245
4246 tpnt->device = NULL;
4247
4248 if (tpnt->buffer) {
4249 normalize_buffer(tpnt->buffer);
4250 kfree(tpnt->buffer->reserved_pages);
4251 kfree(tpnt->buffer);
4252 }
4253
4254 disk->private_data = NULL;
4255 put_disk(disk);
4256 kfree(tpnt);
4257 return;
4258}
4259
4260static int __init init_st(void)
4261{
4262 int err;
4263
4264 validate_options();
4265
4266 printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
4267 verstr, st_fixed_buffer_size, st_max_sg_segs);
4268
4269 st_sysfs_class = class_create(THIS_MODULE, "scsi_tape");
4270 if (IS_ERR(st_sysfs_class)) {
4271 printk(KERN_ERR "Unable create sysfs class for SCSI tapes\n");
4272 return PTR_ERR(st_sysfs_class);
4273 }
4274
4275 err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4276 ST_MAX_TAPE_ENTRIES, "st");
4277 if (err) {
4278 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
4279 SCSI_TAPE_MAJOR);
4280 goto err_class;
4281 }
4282
4283 err = scsi_register_driver(&st_template.gendrv);
4284 if (err)
4285 goto err_chrdev;
4286
4287 err = do_create_sysfs_files();
4288 if (err)
4289 goto err_scsidrv;
4290
4291 return 0;
4292
4293err_scsidrv:
4294 scsi_unregister_driver(&st_template.gendrv);
4295err_chrdev:
4296 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4297 ST_MAX_TAPE_ENTRIES);
4298err_class:
4299 class_destroy(st_sysfs_class);
4300 return err;
4301}
4302
4303static void __exit exit_st(void)
4304{
4305 do_remove_sysfs_files();
4306 scsi_unregister_driver(&st_template.gendrv);
4307 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4308 ST_MAX_TAPE_ENTRIES);
4309 class_destroy(st_sysfs_class);
4310 kfree(scsi_tapes);
4311 printk(KERN_INFO "st: Unloaded.\n");
4312}
4313
4314module_init(init_st);
4315module_exit(exit_st);
4316
4317
4318/* The sysfs driver interface. Read-only at the moment */
4319static ssize_t st_try_direct_io_show(struct device_driver *ddp, char *buf)
4320{
4321 return snprintf(buf, PAGE_SIZE, "%d\n", try_direct_io);
4322}
4323static DRIVER_ATTR(try_direct_io, S_IRUGO, st_try_direct_io_show, NULL);
4324
4325static ssize_t st_fixed_buffer_size_show(struct device_driver *ddp, char *buf)
4326{
4327 return snprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size);
4328}
4329static DRIVER_ATTR(fixed_buffer_size, S_IRUGO, st_fixed_buffer_size_show, NULL);
4330
4331static ssize_t st_max_sg_segs_show(struct device_driver *ddp, char *buf)
4332{
4333 return snprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs);
4334}
4335static DRIVER_ATTR(max_sg_segs, S_IRUGO, st_max_sg_segs_show, NULL);
4336
4337static ssize_t st_version_show(struct device_driver *ddd, char *buf)
4338{
4339 return snprintf(buf, PAGE_SIZE, "[%s]\n", verstr);
4340}
4341static DRIVER_ATTR(version, S_IRUGO, st_version_show, NULL);
4342
4343static int do_create_sysfs_files(void)
4344{
4345 struct device_driver *sysfs = &st_template.gendrv;
4346 int err;
4347
4348 err = driver_create_file(sysfs, &driver_attr_try_direct_io);
4349 if (err)
4350 return err;
4351 err = driver_create_file(sysfs, &driver_attr_fixed_buffer_size);
4352 if (err)
4353 goto err_try_direct_io;
4354 err = driver_create_file(sysfs, &driver_attr_max_sg_segs);
4355 if (err)
4356 goto err_attr_fixed_buf;
4357 err = driver_create_file(sysfs, &driver_attr_version);
4358 if (err)
4359 goto err_attr_max_sg;
4360
4361 return 0;
4362
4363err_attr_max_sg:
4364 driver_remove_file(sysfs, &driver_attr_max_sg_segs);
4365err_attr_fixed_buf:
4366 driver_remove_file(sysfs, &driver_attr_fixed_buffer_size);
4367err_try_direct_io:
4368 driver_remove_file(sysfs, &driver_attr_try_direct_io);
4369 return err;
4370}
4371
4372static void do_remove_sysfs_files(void)
4373{
4374 struct device_driver *sysfs = &st_template.gendrv;
4375
4376 driver_remove_file(sysfs, &driver_attr_version);
4377 driver_remove_file(sysfs, &driver_attr_max_sg_segs);
4378 driver_remove_file(sysfs, &driver_attr_fixed_buffer_size);
4379 driver_remove_file(sysfs, &driver_attr_try_direct_io);
4380}
4381
4382
4383/* The sysfs simple class interface */
4384static ssize_t
4385st_defined_show(struct device *dev, struct device_attribute *attr, char *buf)
4386{
4387 struct st_modedef *STm = dev_get_drvdata(dev);
4388 ssize_t l = 0;
4389
4390 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined);
4391 return l;
4392}
4393
4394DEVICE_ATTR(defined, S_IRUGO, st_defined_show, NULL);
4395
4396static ssize_t
4397st_defblk_show(struct device *dev, struct device_attribute *attr, char *buf)
4398{
4399 struct st_modedef *STm = dev_get_drvdata(dev);
4400 ssize_t l = 0;
4401
4402 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize);
4403 return l;
4404}
4405
4406DEVICE_ATTR(default_blksize, S_IRUGO, st_defblk_show, NULL);
4407
4408static ssize_t
4409st_defdensity_show(struct device *dev, struct device_attribute *attr, char *buf)
4410{
4411 struct st_modedef *STm = dev_get_drvdata(dev);
4412 ssize_t l = 0;
4413 char *fmt;
4414
4415 fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n";
4416 l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density);
4417 return l;
4418}
4419
4420DEVICE_ATTR(default_density, S_IRUGO, st_defdensity_show, NULL);
4421
4422static ssize_t
4423st_defcompression_show(struct device *dev, struct device_attribute *attr,
4424 char *buf)
4425{
4426 struct st_modedef *STm = dev_get_drvdata(dev);
4427 ssize_t l = 0;
4428
4429 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1);
4430 return l;
4431}
4432
4433DEVICE_ATTR(default_compression, S_IRUGO, st_defcompression_show, NULL);
4434
4435static ssize_t
4436st_options_show(struct device *dev, struct device_attribute *attr, char *buf)
4437{
4438 struct st_modedef *STm = dev_get_drvdata(dev);
4439 struct scsi_tape *STp;
4440 int i, j, options;
4441 ssize_t l = 0;
4442
4443 for (i=0; i < st_dev_max; i++) {
4444 for (j=0; j < ST_NBR_MODES; j++)
4445 if (&scsi_tapes[i]->modes[j] == STm)
4446 break;
4447 if (j < ST_NBR_MODES)
4448 break;
4449 }
4450 if (i == st_dev_max)
4451 return 0; /* should never happen */
4452
4453 STp = scsi_tapes[i];
4454
4455 options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0;
4456 options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0;
4457 options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0;
4458 DEB( options |= debugging ? MT_ST_DEBUGGING : 0 );
4459 options |= STp->two_fm ? MT_ST_TWO_FM : 0;
4460 options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0;
4461 options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0;
4462 options |= STp->can_bsr ? MT_ST_CAN_BSR : 0;
4463 options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0;
4464 options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0;
4465 options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
4466 options |= STm->sysv ? MT_ST_SYSV : 0;
4467 options |= STp->immediate ? MT_ST_NOWAIT : 0;
4468 options |= STp->sili ? MT_ST_SILI : 0;
4469
4470 l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
4471 return l;
4472}
4473
4474DEVICE_ATTR(options, S_IRUGO, st_options_show, NULL);
4475
4476static int do_create_class_files(struct scsi_tape *STp, int dev_num, int mode)
4477{
4478 int i, rew, error;
4479 char name[10];
4480 struct device *st_class_member;
4481
4482 for (rew=0; rew < 2; rew++) {
4483 /* Make sure that the minor numbers corresponding to the four
4484 first modes always get the same names */
4485 i = mode << (4 - ST_NBR_MODE_BITS);
4486 snprintf(name, 10, "%s%s%s", rew ? "n" : "",
4487 STp->disk->disk_name, st_formats[i]);
4488 st_class_member =
4489 device_create(st_sysfs_class, &STp->device->sdev_gendev,
4490 MKDEV(SCSI_TAPE_MAJOR,
4491 TAPE_MINOR(dev_num, mode, rew)),
4492 &STp->modes[mode], "%s", name);
4493 if (IS_ERR(st_class_member)) {
4494 printk(KERN_WARNING "st%d: device_create failed\n",
4495 dev_num);
4496 error = PTR_ERR(st_class_member);
4497 goto out;
4498 }
4499
4500 error = device_create_file(st_class_member,
4501 &dev_attr_defined);
4502 if (error) goto out;
4503 error = device_create_file(st_class_member,
4504 &dev_attr_default_blksize);
4505 if (error) goto out;
4506 error = device_create_file(st_class_member,
4507 &dev_attr_default_density);
4508 if (error) goto out;
4509 error = device_create_file(st_class_member,
4510 &dev_attr_default_compression);
4511 if (error) goto out;
4512 error = device_create_file(st_class_member,
4513 &dev_attr_options);
4514 if (error) goto out;
4515
4516 if (mode == 0 && rew == 0) {
4517 error = sysfs_create_link(&STp->device->sdev_gendev.kobj,
4518 &st_class_member->kobj,
4519 "tape");
4520 if (error) {
4521 printk(KERN_ERR
4522 "st%d: Can't create sysfs link from SCSI device.\n",
4523 dev_num);
4524 goto out;
4525 }
4526 }
4527 }
4528
4529 return 0;
4530
4531out:
4532 return error;
4533}
4534
4535/* The following functions may be useful for a larger audience. */
4536static int sgl_map_user_pages(struct st_buffer *STbp,
4537 const unsigned int max_pages, unsigned long uaddr,
4538 size_t count, int rw)
4539{
4540 unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
4541 unsigned long start = uaddr >> PAGE_SHIFT;
4542 const int nr_pages = end - start;
4543 int res, i, j;
4544 struct page **pages;
4545 struct rq_map_data *mdata = &STbp->map_data;
4546
4547 /* User attempted Overflow! */
4548 if ((uaddr + count) < uaddr)
4549 return -EINVAL;
4550
4551 /* Too big */
4552 if (nr_pages > max_pages)
4553 return -ENOMEM;
4554
4555 /* Hmm? */
4556 if (count == 0)
4557 return 0;
4558
4559 if ((pages = kmalloc(max_pages * sizeof(*pages), GFP_KERNEL)) == NULL)
4560 return -ENOMEM;
4561
4562 /* Try to fault in all of the necessary pages */
4563 down_read(¤t->mm->mmap_sem);
4564 /* rw==READ means read from drive, write into memory area */
4565 res = get_user_pages(
4566 current,
4567 current->mm,
4568 uaddr,
4569 nr_pages,
4570 rw == READ,
4571 0, /* don't force */
4572 pages,
4573 NULL);
4574 up_read(¤t->mm->mmap_sem);
4575
4576 /* Errors and no page mapped should return here */
4577 if (res < nr_pages)
4578 goto out_unmap;
4579
4580 for (i=0; i < nr_pages; i++) {
4581 /* FIXME: flush superflous for rw==READ,
4582 * probably wrong function for rw==WRITE
4583 */
4584 flush_dcache_page(pages[i]);
4585 }
4586
4587 mdata->offset = uaddr & ~PAGE_MASK;
4588 STbp->mapped_pages = pages;
4589
4590 return nr_pages;
4591 out_unmap:
4592 if (res > 0) {
4593 for (j=0; j < res; j++)
4594 page_cache_release(pages[j]);
4595 res = 0;
4596 }
4597 kfree(pages);
4598 return res;
4599}
4600
4601
4602/* And unmap them... */
4603static int sgl_unmap_user_pages(struct st_buffer *STbp,
4604 const unsigned int nr_pages, int dirtied)
4605{
4606 int i;
4607
4608 for (i=0; i < nr_pages; i++) {
4609 struct page *page = STbp->mapped_pages[i];
4610
4611 if (dirtied)
4612 SetPageDirty(page);
4613 /* FIXME: cache flush missing for rw==READ
4614 * FIXME: call the correct reference counting function
4615 */
4616 page_cache_release(page);
4617 }
4618 kfree(STbp->mapped_pages);
4619 STbp->mapped_pages = NULL;
4620
4621 return 0;
4622}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
4 file Documentation/scsi/st.rst for more information.
5
6 History:
7 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
8 Contribution and ideas from several people including (in alphabetical
9 order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk,
10 Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
11 Michael Schaefer, J"org Weule, and Eric Youngdale.
12
13 Copyright 1992 - 2016 Kai Makisara
14 email Kai.Makisara@kolumbus.fi
15
16 Some small formal changes - aeb, 950809
17
18 Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
19 */
20
21static const char *verstr = "20160209";
22
23#include <linux/module.h>
24
25#include <linux/compat.h>
26#include <linux/fs.h>
27#include <linux/kernel.h>
28#include <linux/sched/signal.h>
29#include <linux/mm.h>
30#include <linux/init.h>
31#include <linux/string.h>
32#include <linux/slab.h>
33#include <linux/errno.h>
34#include <linux/mtio.h>
35#include <linux/major.h>
36#include <linux/cdrom.h>
37#include <linux/ioctl.h>
38#include <linux/fcntl.h>
39#include <linux/spinlock.h>
40#include <linux/blkdev.h>
41#include <linux/moduleparam.h>
42#include <linux/cdev.h>
43#include <linux/idr.h>
44#include <linux/delay.h>
45#include <linux/mutex.h>
46
47#include <linux/uaccess.h>
48#include <asm/dma.h>
49#include <asm/unaligned.h>
50
51#include <scsi/scsi.h>
52#include <scsi/scsi_dbg.h>
53#include <scsi/scsi_device.h>
54#include <scsi/scsi_driver.h>
55#include <scsi/scsi_eh.h>
56#include <scsi/scsi_host.h>
57#include <scsi/scsi_ioctl.h>
58#include <scsi/sg.h>
59
60
61/* The driver prints some debugging information on the console if DEBUG
62 is defined and non-zero. */
63#define DEBUG 1
64#define NO_DEBUG 0
65
66#define ST_DEB_MSG KERN_NOTICE
67#if DEBUG
68/* The message level for the debug messages is currently set to KERN_NOTICE
69 so that people can easily see the messages. Later when the debugging messages
70 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
71#define DEB(a) a
72#define DEBC(a) if (debugging) { a ; }
73#else
74#define DEB(a)
75#define DEBC(a)
76#endif
77
78#define ST_KILOBYTE 1024
79
80#include "st_options.h"
81#include "st.h"
82
83static int buffer_kbs;
84static int max_sg_segs;
85static int try_direct_io = TRY_DIRECT_IO;
86static int try_rdio = 1;
87static int try_wdio = 1;
88static int debug_flag;
89
90static const struct class st_sysfs_class;
91static const struct attribute_group *st_dev_groups[];
92static const struct attribute_group *st_drv_groups[];
93
94MODULE_AUTHOR("Kai Makisara");
95MODULE_DESCRIPTION("SCSI tape (st) driver");
96MODULE_LICENSE("GPL");
97MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
98MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
99
100/* Set 'perm' (4th argument) to 0 to disable module_param's definition
101 * of sysfs parameters (which module_param doesn't yet support).
102 * Sysfs parameters defined explicitly later.
103 */
104module_param_named(buffer_kbs, buffer_kbs, int, 0);
105MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)");
106module_param_named(max_sg_segs, max_sg_segs, int, 0);
107MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
108module_param_named(try_direct_io, try_direct_io, int, 0);
109MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
110module_param_named(debug_flag, debug_flag, int, 0);
111MODULE_PARM_DESC(debug_flag, "Enable DEBUG, same as setting debugging=1");
112
113
114/* Extra parameters for testing */
115module_param_named(try_rdio, try_rdio, int, 0);
116MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible");
117module_param_named(try_wdio, try_wdio, int, 0);
118MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible");
119
120#ifndef MODULE
121static int write_threshold_kbs; /* retained for compatibility */
122static struct st_dev_parm {
123 char *name;
124 int *val;
125} parms[] __initdata = {
126 {
127 "buffer_kbs", &buffer_kbs
128 },
129 { /* Retained for compatibility with 2.4 */
130 "write_threshold_kbs", &write_threshold_kbs
131 },
132 {
133 "max_sg_segs", NULL
134 },
135 {
136 "try_direct_io", &try_direct_io
137 },
138 {
139 "debug_flag", &debug_flag
140 }
141};
142#endif
143
144/* Restrict the number of modes so that names for all are assigned */
145#if ST_NBR_MODES > 16
146#error "Maximum number of modes is 16"
147#endif
148/* Bit reversed order to get same names for same minors with all
149 mode counts */
150static const char *st_formats[] = {
151 "", "r", "k", "s", "l", "t", "o", "u",
152 "m", "v", "p", "x", "a", "y", "q", "z"};
153
154/* The default definitions have been moved to st_options.h */
155
156#define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE)
157
158/* The buffer size should fit into the 24 bits for length in the
159 6-byte SCSI read and write commands. */
160#if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1)
161#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
162#endif
163
164static int debugging = DEBUG;
165
166#define MAX_RETRIES 0
167#define MAX_WRITE_RETRIES 0
168#define MAX_READY_RETRIES 0
169#define NO_TAPE NOT_READY
170
171#define ST_TIMEOUT (900 * HZ)
172#define ST_LONG_TIMEOUT (14000 * HZ)
173
174/* Remove mode bits and auto-rewind bit (7) */
175#define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \
176 (iminor(x) & ((1 << ST_MODE_SHIFT)-1)))
177#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
178
179/* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */
180#define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \
181 (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) )
182
183/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
184 24 bits) */
185#define SET_DENS_AND_BLK 0x10001
186
187static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE;
188static int st_max_sg_segs = ST_MAX_SG;
189
190static int modes_defined;
191
192static int enlarge_buffer(struct st_buffer *, int);
193static void clear_buffer(struct st_buffer *);
194static void normalize_buffer(struct st_buffer *);
195static int append_to_buffer(const char __user *, struct st_buffer *, int);
196static int from_buffer(struct st_buffer *, char __user *, int);
197static void move_buffer_data(struct st_buffer *, int);
198
199static int sgl_map_user_pages(struct st_buffer *, const unsigned int,
200 unsigned long, size_t, int);
201static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int);
202
203static int st_probe(struct device *);
204static int st_remove(struct device *);
205
206static struct scsi_driver st_template = {
207 .gendrv = {
208 .name = "st",
209 .owner = THIS_MODULE,
210 .probe = st_probe,
211 .remove = st_remove,
212 .groups = st_drv_groups,
213 },
214};
215
216static int st_compression(struct scsi_tape *, int);
217
218static int find_partition(struct scsi_tape *);
219static int switch_partition(struct scsi_tape *);
220
221static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long);
222
223static void scsi_tape_release(struct kref *);
224
225#define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
226
227static DEFINE_MUTEX(st_ref_mutex);
228static DEFINE_SPINLOCK(st_index_lock);
229static DEFINE_SPINLOCK(st_use_lock);
230static DEFINE_IDR(st_index_idr);
231
232
233
234#ifndef SIGS_FROM_OSST
235#define SIGS_FROM_OSST \
236 {"OnStream", "SC-", "", "osst"}, \
237 {"OnStream", "DI-", "", "osst"}, \
238 {"OnStream", "DP-", "", "osst"}, \
239 {"OnStream", "USB", "", "osst"}, \
240 {"OnStream", "FW-", "", "osst"}
241#endif
242
243static struct scsi_tape *scsi_tape_get(int dev)
244{
245 struct scsi_tape *STp = NULL;
246
247 mutex_lock(&st_ref_mutex);
248 spin_lock(&st_index_lock);
249
250 STp = idr_find(&st_index_idr, dev);
251 if (!STp) goto out;
252
253 kref_get(&STp->kref);
254
255 if (!STp->device)
256 goto out_put;
257
258 if (scsi_device_get(STp->device))
259 goto out_put;
260
261 goto out;
262
263out_put:
264 kref_put(&STp->kref, scsi_tape_release);
265 STp = NULL;
266out:
267 spin_unlock(&st_index_lock);
268 mutex_unlock(&st_ref_mutex);
269 return STp;
270}
271
272static void scsi_tape_put(struct scsi_tape *STp)
273{
274 struct scsi_device *sdev = STp->device;
275
276 mutex_lock(&st_ref_mutex);
277 kref_put(&STp->kref, scsi_tape_release);
278 scsi_device_put(sdev);
279 mutex_unlock(&st_ref_mutex);
280}
281
282struct st_reject_data {
283 char *vendor;
284 char *model;
285 char *rev;
286 char *driver_hint; /* Name of the correct driver, NULL if unknown */
287};
288
289static struct st_reject_data reject_list[] = {
290 /* {"XXX", "Yy-", "", NULL}, example */
291 SIGS_FROM_OSST,
292 {NULL, }};
293
294/* If the device signature is on the list of incompatible drives, the
295 function returns a pointer to the name of the correct driver (if known) */
296static char * st_incompatible(struct scsi_device* SDp)
297{
298 struct st_reject_data *rp;
299
300 for (rp=&(reject_list[0]); rp->vendor != NULL; rp++)
301 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
302 !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
303 !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) {
304 if (rp->driver_hint)
305 return rp->driver_hint;
306 else
307 return "unknown";
308 }
309 return NULL;
310}
311
312
313#define st_printk(prefix, t, fmt, a...) \
314 sdev_prefix_printk(prefix, (t)->device, (t)->name, fmt, ##a)
315#ifdef DEBUG
316#define DEBC_printk(t, fmt, a...) \
317 if (debugging) { st_printk(ST_DEB_MSG, t, fmt, ##a ); }
318#else
319#define DEBC_printk(t, fmt, a...)
320#endif
321
322static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s)
323{
324 const u8 *ucp;
325 const u8 *sense = SRpnt->sense;
326
327 s->have_sense = scsi_normalize_sense(SRpnt->sense,
328 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
329 s->flags = 0;
330
331 if (s->have_sense) {
332 s->deferred = 0;
333 s->remainder_valid =
334 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
335 switch (sense[0] & 0x7f) {
336 case 0x71:
337 s->deferred = 1;
338 fallthrough;
339 case 0x70:
340 s->fixed_format = 1;
341 s->flags = sense[2] & 0xe0;
342 break;
343 case 0x73:
344 s->deferred = 1;
345 fallthrough;
346 case 0x72:
347 s->fixed_format = 0;
348 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
349 s->flags = ucp ? (ucp[3] & 0xe0) : 0;
350 break;
351 }
352 }
353}
354
355
356/* Convert the result to success code */
357static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
358{
359 int result = SRpnt->result;
360 u8 scode;
361 DEB(const char *stp;)
362 char *name = STp->name;
363 struct st_cmdstatus *cmdstatp;
364
365 if (!result)
366 return 0;
367
368 cmdstatp = &STp->buffer->cmdstat;
369 st_analyze_sense(SRpnt, cmdstatp);
370
371 if (cmdstatp->have_sense)
372 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
373 else
374 scode = 0;
375
376 DEB(
377 if (debugging) {
378 st_printk(ST_DEB_MSG, STp,
379 "Error: %x, cmd: %x %x %x %x %x %x\n", result,
380 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
381 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
382 if (cmdstatp->have_sense)
383 __scsi_print_sense(STp->device, name,
384 SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
385 } ) /* end DEB */
386 if (!debugging) { /* Abnormal conditions for tape */
387 if (!cmdstatp->have_sense)
388 st_printk(KERN_WARNING, STp,
389 "Error %x (driver bt 0, host bt 0x%x).\n",
390 result, host_byte(result));
391 else if (cmdstatp->have_sense &&
392 scode != NO_SENSE &&
393 scode != RECOVERED_ERROR &&
394 /* scode != UNIT_ATTENTION && */
395 scode != BLANK_CHECK &&
396 scode != VOLUME_OVERFLOW &&
397 SRpnt->cmd[0] != MODE_SENSE &&
398 SRpnt->cmd[0] != TEST_UNIT_READY) {
399
400 __scsi_print_sense(STp->device, name,
401 SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
402 }
403 }
404
405 if (cmdstatp->fixed_format &&
406 STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */
407 if (STp->cln_sense_value)
408 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
409 STp->cln_sense_mask) == STp->cln_sense_value);
410 else
411 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
412 STp->cln_sense_mask) != 0);
413 }
414 if (cmdstatp->have_sense &&
415 cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17)
416 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */
417 if (cmdstatp->have_sense && scode == UNIT_ATTENTION && cmdstatp->sense_hdr.asc == 0x29)
418 STp->pos_unknown = 1; /* ASC => power on / reset */
419
420 STp->pos_unknown |= STp->device->was_reset;
421
422 if (cmdstatp->have_sense &&
423 scode == RECOVERED_ERROR
424#if ST_RECOVERED_WRITE_FATAL
425 && SRpnt->cmd[0] != WRITE_6
426 && SRpnt->cmd[0] != WRITE_FILEMARKS
427#endif
428 ) {
429 STp->recover_count++;
430 STp->recover_reg++;
431
432 DEB(
433 if (debugging) {
434 if (SRpnt->cmd[0] == READ_6)
435 stp = "read";
436 else if (SRpnt->cmd[0] == WRITE_6)
437 stp = "write";
438 else
439 stp = "ioctl";
440 st_printk(ST_DEB_MSG, STp,
441 "Recovered %s error (%d).\n",
442 stp, STp->recover_count);
443 } ) /* end DEB */
444
445 if (cmdstatp->flags == 0)
446 return 0;
447 }
448 return (-EIO);
449}
450
451static struct st_request *st_allocate_request(struct scsi_tape *stp)
452{
453 struct st_request *streq;
454
455 streq = kzalloc(sizeof(*streq), GFP_KERNEL);
456 if (streq)
457 streq->stp = stp;
458 else {
459 st_printk(KERN_ERR, stp,
460 "Can't get SCSI request.\n");
461 if (signal_pending(current))
462 stp->buffer->syscall_result = -EINTR;
463 else
464 stp->buffer->syscall_result = -EBUSY;
465 }
466
467 return streq;
468}
469
470static void st_release_request(struct st_request *streq)
471{
472 kfree(streq);
473}
474
475static void st_do_stats(struct scsi_tape *STp, struct request *req)
476{
477 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
478 ktime_t now;
479
480 now = ktime_get();
481 if (scmd->cmnd[0] == WRITE_6) {
482 now = ktime_sub(now, STp->stats->write_time);
483 atomic64_add(ktime_to_ns(now), &STp->stats->tot_write_time);
484 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
485 atomic64_inc(&STp->stats->write_cnt);
486 if (scmd->result) {
487 atomic64_add(atomic_read(&STp->stats->last_write_size)
488 - STp->buffer->cmdstat.residual,
489 &STp->stats->write_byte_cnt);
490 if (STp->buffer->cmdstat.residual > 0)
491 atomic64_inc(&STp->stats->resid_cnt);
492 } else
493 atomic64_add(atomic_read(&STp->stats->last_write_size),
494 &STp->stats->write_byte_cnt);
495 } else if (scmd->cmnd[0] == READ_6) {
496 now = ktime_sub(now, STp->stats->read_time);
497 atomic64_add(ktime_to_ns(now), &STp->stats->tot_read_time);
498 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
499 atomic64_inc(&STp->stats->read_cnt);
500 if (scmd->result) {
501 atomic64_add(atomic_read(&STp->stats->last_read_size)
502 - STp->buffer->cmdstat.residual,
503 &STp->stats->read_byte_cnt);
504 if (STp->buffer->cmdstat.residual > 0)
505 atomic64_inc(&STp->stats->resid_cnt);
506 } else
507 atomic64_add(atomic_read(&STp->stats->last_read_size),
508 &STp->stats->read_byte_cnt);
509 } else {
510 now = ktime_sub(now, STp->stats->other_time);
511 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
512 atomic64_inc(&STp->stats->other_cnt);
513 }
514 atomic64_dec(&STp->stats->in_flight);
515}
516
517static enum rq_end_io_ret st_scsi_execute_end(struct request *req,
518 blk_status_t status)
519{
520 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
521 struct st_request *SRpnt = req->end_io_data;
522 struct scsi_tape *STp = SRpnt->stp;
523 struct bio *tmp;
524
525 STp->buffer->cmdstat.midlevel_result = SRpnt->result = scmd->result;
526 STp->buffer->cmdstat.residual = scmd->resid_len;
527
528 st_do_stats(STp, req);
529
530 tmp = SRpnt->bio;
531 if (scmd->sense_len)
532 memcpy(SRpnt->sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
533 if (SRpnt->waiting)
534 complete(SRpnt->waiting);
535
536 blk_rq_unmap_user(tmp);
537 blk_mq_free_request(req);
538 return RQ_END_IO_NONE;
539}
540
541static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd,
542 int data_direction, void *buffer, unsigned bufflen,
543 int timeout, int retries)
544{
545 struct request *req;
546 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
547 int err = 0;
548 struct scsi_tape *STp = SRpnt->stp;
549 struct scsi_cmnd *scmd;
550
551 req = scsi_alloc_request(SRpnt->stp->device->request_queue,
552 data_direction == DMA_TO_DEVICE ?
553 REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0);
554 if (IS_ERR(req))
555 return PTR_ERR(req);
556 scmd = blk_mq_rq_to_pdu(req);
557 req->rq_flags |= RQF_QUIET;
558
559 mdata->null_mapped = 1;
560
561 if (bufflen) {
562 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen,
563 GFP_KERNEL);
564 if (err) {
565 blk_mq_free_request(req);
566 return err;
567 }
568 }
569
570 atomic64_inc(&STp->stats->in_flight);
571 if (cmd[0] == WRITE_6) {
572 atomic_set(&STp->stats->last_write_size, bufflen);
573 STp->stats->write_time = ktime_get();
574 } else if (cmd[0] == READ_6) {
575 atomic_set(&STp->stats->last_read_size, bufflen);
576 STp->stats->read_time = ktime_get();
577 } else {
578 STp->stats->other_time = ktime_get();
579 }
580
581 SRpnt->bio = req->bio;
582 scmd->cmd_len = COMMAND_SIZE(cmd[0]);
583 memcpy(scmd->cmnd, cmd, scmd->cmd_len);
584 req->timeout = timeout;
585 scmd->allowed = retries;
586 req->end_io = st_scsi_execute_end;
587 req->end_io_data = SRpnt;
588
589 blk_execute_rq_nowait(req, true);
590 return 0;
591}
592
593/* Do the scsi command. Waits until command performed if do_wait is true.
594 Otherwise write_behind_check() is used to check that the command
595 has finished. */
596static struct st_request *
597st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd,
598 int bytes, int direction, int timeout, int retries, int do_wait)
599{
600 struct completion *waiting;
601 struct rq_map_data *mdata = &STp->buffer->map_data;
602 int ret;
603
604 /* if async, make sure there's no command outstanding */
605 if (!do_wait && ((STp->buffer)->last_SRpnt)) {
606 st_printk(KERN_ERR, STp,
607 "Async command already active.\n");
608 if (signal_pending(current))
609 (STp->buffer)->syscall_result = (-EINTR);
610 else
611 (STp->buffer)->syscall_result = (-EBUSY);
612 return NULL;
613 }
614
615 if (!SRpnt) {
616 SRpnt = st_allocate_request(STp);
617 if (!SRpnt)
618 return NULL;
619 }
620
621 /* If async IO, set last_SRpnt. This ptr tells write_behind_check
622 which IO is outstanding. It's nulled out when the IO completes. */
623 if (!do_wait)
624 (STp->buffer)->last_SRpnt = SRpnt;
625
626 waiting = &STp->wait;
627 init_completion(waiting);
628 SRpnt->waiting = waiting;
629
630 if (STp->buffer->do_dio) {
631 mdata->page_order = 0;
632 mdata->nr_entries = STp->buffer->sg_segs;
633 mdata->pages = STp->buffer->mapped_pages;
634 } else {
635 mdata->page_order = STp->buffer->reserved_page_order;
636 mdata->nr_entries =
637 DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
638 mdata->pages = STp->buffer->reserved_pages;
639 mdata->offset = 0;
640 }
641
642 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
643 STp->buffer->cmdstat.have_sense = 0;
644 STp->buffer->syscall_result = 0;
645
646 ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout,
647 retries);
648 if (ret) {
649 /* could not allocate the buffer or request was too large */
650 (STp->buffer)->syscall_result = (-EBUSY);
651 (STp->buffer)->last_SRpnt = NULL;
652 } else if (do_wait) {
653 wait_for_completion(waiting);
654 SRpnt->waiting = NULL;
655 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
656 }
657
658 return SRpnt;
659}
660
661
662/* Handle the write-behind checking (waits for completion). Returns -ENOSPC if
663 write has been correct but EOM early warning reached, -EIO if write ended in
664 error or zero if write successful. Asynchronous writes are used only in
665 variable block mode. */
666static int write_behind_check(struct scsi_tape * STp)
667{
668 int retval = 0;
669 struct st_buffer *STbuffer;
670 struct st_partstat *STps;
671 struct st_cmdstatus *cmdstatp;
672 struct st_request *SRpnt;
673
674 STbuffer = STp->buffer;
675 if (!STbuffer->writing)
676 return 0;
677
678 DEB(
679 if (STp->write_pending)
680 STp->nbr_waits++;
681 else
682 STp->nbr_finished++;
683 ) /* end DEB */
684
685 wait_for_completion(&(STp->wait));
686 SRpnt = STbuffer->last_SRpnt;
687 STbuffer->last_SRpnt = NULL;
688 SRpnt->waiting = NULL;
689
690 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
691 st_release_request(SRpnt);
692
693 STbuffer->buffer_bytes -= STbuffer->writing;
694 STps = &(STp->ps[STp->partition]);
695 if (STps->drv_block >= 0) {
696 if (STp->block_size == 0)
697 STps->drv_block++;
698 else
699 STps->drv_block += STbuffer->writing / STp->block_size;
700 }
701
702 cmdstatp = &STbuffer->cmdstat;
703 if (STbuffer->syscall_result) {
704 retval = -EIO;
705 if (cmdstatp->have_sense && !cmdstatp->deferred &&
706 (cmdstatp->flags & SENSE_EOM) &&
707 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
708 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) {
709 /* EOM at write-behind, has all data been written? */
710 if (!cmdstatp->remainder_valid ||
711 cmdstatp->uremainder64 == 0)
712 retval = -ENOSPC;
713 }
714 if (retval == -EIO)
715 STps->drv_block = -1;
716 }
717 STbuffer->writing = 0;
718
719 DEB(if (debugging && retval)
720 st_printk(ST_DEB_MSG, STp,
721 "Async write error %x, return value %d.\n",
722 STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */
723
724 return retval;
725}
726
727
728/* Step over EOF if it has been inadvertently crossed (ioctl not used because
729 it messes up the block number). */
730static int cross_eof(struct scsi_tape * STp, int forward)
731{
732 struct st_request *SRpnt;
733 unsigned char cmd[MAX_COMMAND_SIZE];
734
735 cmd[0] = SPACE;
736 cmd[1] = 0x01; /* Space FileMarks */
737 if (forward) {
738 cmd[2] = cmd[3] = 0;
739 cmd[4] = 1;
740 } else
741 cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */
742 cmd[5] = 0;
743
744 DEBC_printk(STp, "Stepping over filemark %s.\n",
745 forward ? "forward" : "backward");
746
747 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
748 STp->device->request_queue->rq_timeout,
749 MAX_RETRIES, 1);
750 if (!SRpnt)
751 return (STp->buffer)->syscall_result;
752
753 st_release_request(SRpnt);
754 SRpnt = NULL;
755
756 if ((STp->buffer)->cmdstat.midlevel_result != 0)
757 st_printk(KERN_ERR, STp,
758 "Stepping over filemark %s failed.\n",
759 forward ? "forward" : "backward");
760
761 return (STp->buffer)->syscall_result;
762}
763
764
765/* Flush the write buffer (never need to write if variable blocksize). */
766static int st_flush_write_buffer(struct scsi_tape * STp)
767{
768 int transfer, blks;
769 int result;
770 unsigned char cmd[MAX_COMMAND_SIZE];
771 struct st_request *SRpnt;
772 struct st_partstat *STps;
773
774 result = write_behind_check(STp);
775 if (result)
776 return result;
777
778 result = 0;
779 if (STp->dirty == 1) {
780
781 transfer = STp->buffer->buffer_bytes;
782 DEBC_printk(STp, "Flushing %d bytes.\n", transfer);
783
784 memset(cmd, 0, MAX_COMMAND_SIZE);
785 cmd[0] = WRITE_6;
786 cmd[1] = 1;
787 blks = transfer / STp->block_size;
788 cmd[2] = blks >> 16;
789 cmd[3] = blks >> 8;
790 cmd[4] = blks;
791
792 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE,
793 STp->device->request_queue->rq_timeout,
794 MAX_WRITE_RETRIES, 1);
795 if (!SRpnt)
796 return (STp->buffer)->syscall_result;
797
798 STps = &(STp->ps[STp->partition]);
799 if ((STp->buffer)->syscall_result != 0) {
800 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
801
802 if (cmdstatp->have_sense && !cmdstatp->deferred &&
803 (cmdstatp->flags & SENSE_EOM) &&
804 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
805 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
806 (!cmdstatp->remainder_valid ||
807 cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */
808 STp->dirty = 0;
809 (STp->buffer)->buffer_bytes = 0;
810 if (STps->drv_block >= 0)
811 STps->drv_block += blks;
812 result = (-ENOSPC);
813 } else {
814 st_printk(KERN_ERR, STp, "Error on flush.\n");
815 STps->drv_block = (-1);
816 result = (-EIO);
817 }
818 } else {
819 if (STps->drv_block >= 0)
820 STps->drv_block += blks;
821 STp->dirty = 0;
822 (STp->buffer)->buffer_bytes = 0;
823 }
824 st_release_request(SRpnt);
825 SRpnt = NULL;
826 }
827 return result;
828}
829
830
831/* Flush the tape buffer. The tape will be positioned correctly unless
832 seek_next is true. */
833static int flush_buffer(struct scsi_tape *STp, int seek_next)
834{
835 int backspace, result;
836 struct st_partstat *STps;
837
838 /*
839 * If there was a bus reset, block further access
840 * to this device.
841 */
842 if (STp->pos_unknown)
843 return (-EIO);
844
845 if (STp->ready != ST_READY)
846 return 0;
847 STps = &(STp->ps[STp->partition]);
848 if (STps->rw == ST_WRITING) /* Writing */
849 return st_flush_write_buffer(STp);
850
851 if (STp->block_size == 0)
852 return 0;
853
854 backspace = ((STp->buffer)->buffer_bytes +
855 (STp->buffer)->read_pointer) / STp->block_size -
856 ((STp->buffer)->read_pointer + STp->block_size - 1) /
857 STp->block_size;
858 (STp->buffer)->buffer_bytes = 0;
859 (STp->buffer)->read_pointer = 0;
860 result = 0;
861 if (!seek_next) {
862 if (STps->eof == ST_FM_HIT) {
863 result = cross_eof(STp, 0); /* Back over the EOF hit */
864 if (!result)
865 STps->eof = ST_NOEOF;
866 else {
867 if (STps->drv_file >= 0)
868 STps->drv_file++;
869 STps->drv_block = 0;
870 }
871 }
872 if (!result && backspace > 0)
873 result = st_int_ioctl(STp, MTBSR, backspace);
874 } else if (STps->eof == ST_FM_HIT) {
875 if (STps->drv_file >= 0)
876 STps->drv_file++;
877 STps->drv_block = 0;
878 STps->eof = ST_NOEOF;
879 }
880 return result;
881
882}
883
884/* Set the mode parameters */
885static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm)
886{
887 int set_it = 0;
888 unsigned long arg;
889
890 if (!STp->density_changed &&
891 STm->default_density >= 0 &&
892 STm->default_density != STp->density) {
893 arg = STm->default_density;
894 set_it = 1;
895 } else
896 arg = STp->density;
897 arg <<= MT_ST_DENSITY_SHIFT;
898 if (!STp->blksize_changed &&
899 STm->default_blksize >= 0 &&
900 STm->default_blksize != STp->block_size) {
901 arg |= STm->default_blksize;
902 set_it = 1;
903 } else
904 arg |= STp->block_size;
905 if (set_it &&
906 st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) {
907 st_printk(KERN_WARNING, STp,
908 "Can't set default block size to %d bytes "
909 "and density %x.\n",
910 STm->default_blksize, STm->default_density);
911 if (modes_defined)
912 return (-EINVAL);
913 }
914 return 0;
915}
916
917
918/* Lock or unlock the drive door. Don't use when st_request allocated. */
919static int do_door_lock(struct scsi_tape * STp, int do_lock)
920{
921 int retval;
922
923 DEBC_printk(STp, "%socking drive door.\n", do_lock ? "L" : "Unl");
924
925 retval = scsi_set_medium_removal(STp->device,
926 do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW);
927 if (!retval)
928 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
929 else
930 STp->door_locked = ST_LOCK_FAILS;
931 return retval;
932}
933
934
935/* Set the internal state after reset */
936static void reset_state(struct scsi_tape *STp)
937{
938 int i;
939 struct st_partstat *STps;
940
941 STp->pos_unknown = 0;
942 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
943 STps = &(STp->ps[i]);
944 STps->rw = ST_IDLE;
945 STps->eof = ST_NOEOF;
946 STps->at_sm = 0;
947 STps->last_block_valid = 0;
948 STps->drv_block = -1;
949 STps->drv_file = -1;
950 }
951 if (STp->can_partitions) {
952 STp->partition = find_partition(STp);
953 if (STp->partition < 0)
954 STp->partition = 0;
955 STp->new_partition = STp->partition;
956 }
957}
958
959/* Test if the drive is ready. Returns either one of the codes below or a negative system
960 error code. */
961#define CHKRES_READY 0
962#define CHKRES_NEW_SESSION 1
963#define CHKRES_NOT_READY 2
964#define CHKRES_NO_TAPE 3
965
966#define MAX_ATTENTIONS 10
967
968static int test_ready(struct scsi_tape *STp, int do_wait)
969{
970 int attentions, waits, max_wait, scode;
971 int retval = CHKRES_READY, new_session = 0;
972 unsigned char cmd[MAX_COMMAND_SIZE];
973 struct st_request *SRpnt = NULL;
974 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
975
976 max_wait = do_wait ? ST_BLOCK_SECONDS : 0;
977
978 for (attentions=waits=0; ; ) {
979 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
980 cmd[0] = TEST_UNIT_READY;
981 SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
982 STp->long_timeout, MAX_READY_RETRIES, 1);
983
984 if (!SRpnt) {
985 retval = (STp->buffer)->syscall_result;
986 break;
987 }
988
989 if (cmdstatp->have_sense) {
990
991 scode = cmdstatp->sense_hdr.sense_key;
992
993 if (scode == UNIT_ATTENTION) { /* New media? */
994 new_session = 1;
995 if (attentions < MAX_ATTENTIONS) {
996 attentions++;
997 continue;
998 }
999 else {
1000 retval = (-EIO);
1001 break;
1002 }
1003 }
1004
1005 if (scode == NOT_READY) {
1006 if (waits < max_wait) {
1007 if (msleep_interruptible(1000)) {
1008 retval = (-EINTR);
1009 break;
1010 }
1011 waits++;
1012 continue;
1013 }
1014 else {
1015 if ((STp->device)->scsi_level >= SCSI_2 &&
1016 cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */
1017 retval = CHKRES_NO_TAPE;
1018 else
1019 retval = CHKRES_NOT_READY;
1020 break;
1021 }
1022 }
1023 }
1024
1025 retval = (STp->buffer)->syscall_result;
1026 if (!retval)
1027 retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY;
1028 break;
1029 }
1030
1031 if (SRpnt != NULL)
1032 st_release_request(SRpnt);
1033 return retval;
1034}
1035
1036
1037/* See if the drive is ready and gather information about the tape. Return values:
1038 < 0 negative error code from errno.h
1039 0 drive ready
1040 1 drive not ready (possibly no tape)
1041*/
1042static int check_tape(struct scsi_tape *STp, struct file *filp)
1043{
1044 int i, retval, new_session = 0, do_wait;
1045 unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning;
1046 unsigned short st_flags = filp->f_flags;
1047 struct st_request *SRpnt = NULL;
1048 struct st_modedef *STm;
1049 struct st_partstat *STps;
1050 struct inode *inode = file_inode(filp);
1051 int mode = TAPE_MODE(inode);
1052
1053 STp->ready = ST_READY;
1054
1055 if (mode != STp->current_mode) {
1056 DEBC_printk(STp, "Mode change from %d to %d.\n",
1057 STp->current_mode, mode);
1058 new_session = 1;
1059 STp->current_mode = mode;
1060 }
1061 STm = &(STp->modes[STp->current_mode]);
1062
1063 saved_cleaning = STp->cleaning_req;
1064 STp->cleaning_req = 0;
1065
1066 do_wait = ((filp->f_flags & O_NONBLOCK) == 0);
1067 retval = test_ready(STp, do_wait);
1068
1069 if (retval < 0)
1070 goto err_out;
1071
1072 if (retval == CHKRES_NEW_SESSION) {
1073 STp->pos_unknown = 0;
1074 STp->partition = STp->new_partition = 0;
1075 if (STp->can_partitions)
1076 STp->nbr_partitions = 1; /* This guess will be updated later
1077 if necessary */
1078 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1079 STps = &(STp->ps[i]);
1080 STps->rw = ST_IDLE;
1081 STps->eof = ST_NOEOF;
1082 STps->at_sm = 0;
1083 STps->last_block_valid = 0;
1084 STps->drv_block = 0;
1085 STps->drv_file = 0;
1086 }
1087 new_session = 1;
1088 }
1089 else {
1090 STp->cleaning_req |= saved_cleaning;
1091
1092 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) {
1093 if (retval == CHKRES_NO_TAPE)
1094 STp->ready = ST_NO_TAPE;
1095 else
1096 STp->ready = ST_NOT_READY;
1097
1098 STp->density = 0; /* Clear the erroneous "residue" */
1099 STp->write_prot = 0;
1100 STp->block_size = 0;
1101 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
1102 STp->partition = STp->new_partition = 0;
1103 STp->door_locked = ST_UNLOCKED;
1104 return CHKRES_NOT_READY;
1105 }
1106 }
1107
1108 if (STp->omit_blklims)
1109 STp->min_block = STp->max_block = (-1);
1110 else {
1111 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1112 cmd[0] = READ_BLOCK_LIMITS;
1113
1114 SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE,
1115 STp->device->request_queue->rq_timeout,
1116 MAX_READY_RETRIES, 1);
1117 if (!SRpnt) {
1118 retval = (STp->buffer)->syscall_result;
1119 goto err_out;
1120 }
1121
1122 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) {
1123 STp->max_block = ((STp->buffer)->b_data[1] << 16) |
1124 ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3];
1125 STp->min_block = ((STp->buffer)->b_data[4] << 8) |
1126 (STp->buffer)->b_data[5];
1127 if ( DEB( debugging || ) !STp->inited)
1128 st_printk(KERN_INFO, STp,
1129 "Block limits %d - %d bytes.\n",
1130 STp->min_block, STp->max_block);
1131 } else {
1132 STp->min_block = STp->max_block = (-1);
1133 DEBC_printk(STp, "Can't read block limits.\n");
1134 }
1135 }
1136
1137 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1138 cmd[0] = MODE_SENSE;
1139 cmd[4] = 12;
1140
1141 SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE,
1142 STp->device->request_queue->rq_timeout,
1143 MAX_READY_RETRIES, 1);
1144 if (!SRpnt) {
1145 retval = (STp->buffer)->syscall_result;
1146 goto err_out;
1147 }
1148
1149 if ((STp->buffer)->syscall_result != 0) {
1150 DEBC_printk(STp, "No Mode Sense.\n");
1151 STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */
1152 (STp->buffer)->syscall_result = 0; /* Prevent error propagation */
1153 STp->drv_write_prot = 0;
1154 } else {
1155 DEBC_printk(STp,"Mode sense. Length %d, "
1156 "medium %x, WBS %x, BLL %d\n",
1157 (STp->buffer)->b_data[0],
1158 (STp->buffer)->b_data[1],
1159 (STp->buffer)->b_data[2],
1160 (STp->buffer)->b_data[3]);
1161
1162 if ((STp->buffer)->b_data[3] >= 8) {
1163 STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7;
1164 STp->density = (STp->buffer)->b_data[4];
1165 STp->block_size = (STp->buffer)->b_data[9] * 65536 +
1166 (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11];
1167 DEBC_printk(STp, "Density %x, tape length: %x, "
1168 "drv buffer: %d\n",
1169 STp->density,
1170 (STp->buffer)->b_data[5] * 65536 +
1171 (STp->buffer)->b_data[6] * 256 +
1172 (STp->buffer)->b_data[7],
1173 STp->drv_buffer);
1174 }
1175 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
1176 if (!STp->drv_buffer && STp->immediate_filemark) {
1177 st_printk(KERN_WARNING, STp,
1178 "non-buffered tape: disabling "
1179 "writing immediate filemarks\n");
1180 STp->immediate_filemark = 0;
1181 }
1182 }
1183 st_release_request(SRpnt);
1184 SRpnt = NULL;
1185 STp->inited = 1;
1186
1187 if (STp->block_size > 0)
1188 (STp->buffer)->buffer_blocks =
1189 (STp->buffer)->buffer_size / STp->block_size;
1190 else
1191 (STp->buffer)->buffer_blocks = 1;
1192 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
1193
1194 DEBC_printk(STp, "Block size: %d, buffer size: %d (%d blocks).\n",
1195 STp->block_size, (STp->buffer)->buffer_size,
1196 (STp->buffer)->buffer_blocks);
1197
1198 if (STp->drv_write_prot) {
1199 STp->write_prot = 1;
1200
1201 DEBC_printk(STp, "Write protected\n");
1202
1203 if (do_wait &&
1204 ((st_flags & O_ACCMODE) == O_WRONLY ||
1205 (st_flags & O_ACCMODE) == O_RDWR)) {
1206 retval = (-EROFS);
1207 goto err_out;
1208 }
1209 }
1210
1211 if (STp->can_partitions && STp->nbr_partitions < 1) {
1212 /* This code is reached when the device is opened for the first time
1213 after the driver has been initialized with tape in the drive and the
1214 partition support has been enabled. */
1215 DEBC_printk(STp, "Updating partition number in status.\n");
1216 if ((STp->partition = find_partition(STp)) < 0) {
1217 retval = STp->partition;
1218 goto err_out;
1219 }
1220 STp->new_partition = STp->partition;
1221 STp->nbr_partitions = 1; /* This guess will be updated when necessary */
1222 }
1223
1224 if (new_session) { /* Change the drive parameters for the new mode */
1225 STp->density_changed = STp->blksize_changed = 0;
1226 STp->compression_changed = 0;
1227 if (!(STm->defaults_for_writes) &&
1228 (retval = set_mode_densblk(STp, STm)) < 0)
1229 goto err_out;
1230
1231 if (STp->default_drvbuffer != 0xff) {
1232 if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer))
1233 st_printk(KERN_WARNING, STp,
1234 "Can't set default drive "
1235 "buffering to %d.\n",
1236 STp->default_drvbuffer);
1237 }
1238 }
1239
1240 return CHKRES_READY;
1241
1242 err_out:
1243 return retval;
1244}
1245
1246
1247 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host
1248 module count. */
1249static int st_open(struct inode *inode, struct file *filp)
1250{
1251 int i, retval = (-EIO);
1252 int resumed = 0;
1253 struct scsi_tape *STp;
1254 struct st_partstat *STps;
1255 int dev = TAPE_NR(inode);
1256
1257 /*
1258 * We really want to do nonseekable_open(inode, filp); here, but some
1259 * versions of tar incorrectly call lseek on tapes and bail out if that
1260 * fails. So we disallow pread() and pwrite(), but permit lseeks.
1261 */
1262 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
1263
1264 if (!(STp = scsi_tape_get(dev))) {
1265 return -ENXIO;
1266 }
1267
1268 filp->private_data = STp;
1269
1270 spin_lock(&st_use_lock);
1271 if (STp->in_use) {
1272 spin_unlock(&st_use_lock);
1273 DEBC_printk(STp, "Device already in use.\n");
1274 scsi_tape_put(STp);
1275 return (-EBUSY);
1276 }
1277
1278 STp->in_use = 1;
1279 spin_unlock(&st_use_lock);
1280 STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0;
1281
1282 if (scsi_autopm_get_device(STp->device) < 0) {
1283 retval = -EIO;
1284 goto err_out;
1285 }
1286 resumed = 1;
1287 if (!scsi_block_when_processing_errors(STp->device)) {
1288 retval = (-ENXIO);
1289 goto err_out;
1290 }
1291
1292 /* See that we have at least a one page buffer available */
1293 if (!enlarge_buffer(STp->buffer, PAGE_SIZE)) {
1294 st_printk(KERN_WARNING, STp,
1295 "Can't allocate one page tape buffer.\n");
1296 retval = (-EOVERFLOW);
1297 goto err_out;
1298 }
1299
1300 (STp->buffer)->cleared = 0;
1301 (STp->buffer)->writing = 0;
1302 (STp->buffer)->syscall_result = 0;
1303
1304 STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY);
1305
1306 STp->dirty = 0;
1307 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1308 STps = &(STp->ps[i]);
1309 STps->rw = ST_IDLE;
1310 }
1311 STp->try_dio_now = STp->try_dio;
1312 STp->recover_count = 0;
1313 DEB( STp->nbr_waits = STp->nbr_finished = 0;
1314 STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; )
1315
1316 retval = check_tape(STp, filp);
1317 if (retval < 0)
1318 goto err_out;
1319 if ((filp->f_flags & O_NONBLOCK) == 0 &&
1320 retval != CHKRES_READY) {
1321 if (STp->ready == NO_TAPE)
1322 retval = (-ENOMEDIUM);
1323 else
1324 retval = (-EIO);
1325 goto err_out;
1326 }
1327 return 0;
1328
1329 err_out:
1330 normalize_buffer(STp->buffer);
1331 spin_lock(&st_use_lock);
1332 STp->in_use = 0;
1333 spin_unlock(&st_use_lock);
1334 if (resumed)
1335 scsi_autopm_put_device(STp->device);
1336 scsi_tape_put(STp);
1337 return retval;
1338
1339}
1340
1341
1342/* Flush the tape buffer before close */
1343static int st_flush(struct file *filp, fl_owner_t id)
1344{
1345 int result = 0, result2;
1346 unsigned char cmd[MAX_COMMAND_SIZE];
1347 struct st_request *SRpnt;
1348 struct scsi_tape *STp = filp->private_data;
1349 struct st_modedef *STm = &(STp->modes[STp->current_mode]);
1350 struct st_partstat *STps = &(STp->ps[STp->partition]);
1351
1352 if (file_count(filp) > 1)
1353 return 0;
1354
1355 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1356 result = st_flush_write_buffer(STp);
1357 if (result != 0 && result != (-ENOSPC))
1358 goto out;
1359 }
1360
1361 if (STp->can_partitions &&
1362 (result2 = switch_partition(STp)) < 0) {
1363 DEBC_printk(STp, "switch_partition at close failed.\n");
1364 if (result == 0)
1365 result = result2;
1366 goto out;
1367 }
1368
1369 DEBC( if (STp->nbr_requests)
1370 st_printk(KERN_DEBUG, STp,
1371 "Number of r/w requests %d, dio used in %d, "
1372 "pages %d.\n", STp->nbr_requests, STp->nbr_dio,
1373 STp->nbr_pages));
1374
1375 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1376 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1377
1378#if DEBUG
1379 DEBC_printk(STp, "Async write waits %d, finished %d.\n",
1380 STp->nbr_waits, STp->nbr_finished);
1381#endif
1382 memset(cmd, 0, MAX_COMMAND_SIZE);
1383 cmd[0] = WRITE_FILEMARKS;
1384 if (STp->immediate_filemark)
1385 cmd[1] = 1;
1386 cmd[4] = 1 + STp->two_fm;
1387
1388 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
1389 STp->device->request_queue->rq_timeout,
1390 MAX_WRITE_RETRIES, 1);
1391 if (!SRpnt) {
1392 result = (STp->buffer)->syscall_result;
1393 goto out;
1394 }
1395
1396 if (STp->buffer->syscall_result == 0 ||
1397 (cmdstatp->have_sense && !cmdstatp->deferred &&
1398 (cmdstatp->flags & SENSE_EOM) &&
1399 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
1400 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
1401 (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) {
1402 /* Write successful at EOM */
1403 st_release_request(SRpnt);
1404 SRpnt = NULL;
1405 if (STps->drv_file >= 0)
1406 STps->drv_file++;
1407 STps->drv_block = 0;
1408 if (STp->two_fm)
1409 cross_eof(STp, 0);
1410 STps->eof = ST_FM;
1411 }
1412 else { /* Write error */
1413 st_release_request(SRpnt);
1414 SRpnt = NULL;
1415 st_printk(KERN_ERR, STp,
1416 "Error on write filemark.\n");
1417 if (result == 0)
1418 result = (-EIO);
1419 }
1420
1421 DEBC_printk(STp, "Buffer flushed, %d EOF(s) written\n", cmd[4]);
1422 } else if (!STp->rew_at_close) {
1423 STps = &(STp->ps[STp->partition]);
1424 if (!STm->sysv || STps->rw != ST_READING) {
1425 if (STp->can_bsr)
1426 result = flush_buffer(STp, 0);
1427 else if (STps->eof == ST_FM_HIT) {
1428 result = cross_eof(STp, 0);
1429 if (result) {
1430 if (STps->drv_file >= 0)
1431 STps->drv_file++;
1432 STps->drv_block = 0;
1433 STps->eof = ST_FM;
1434 } else
1435 STps->eof = ST_NOEOF;
1436 }
1437 } else if ((STps->eof == ST_NOEOF &&
1438 !(result = cross_eof(STp, 1))) ||
1439 STps->eof == ST_FM_HIT) {
1440 if (STps->drv_file >= 0)
1441 STps->drv_file++;
1442 STps->drv_block = 0;
1443 STps->eof = ST_FM;
1444 }
1445 }
1446
1447 out:
1448 if (STp->rew_at_close) {
1449 result2 = st_int_ioctl(STp, MTREW, 1);
1450 if (result == 0)
1451 result = result2;
1452 }
1453 return result;
1454}
1455
1456
1457/* Close the device and release it. BKL is not needed: this is the only thread
1458 accessing this tape. */
1459static int st_release(struct inode *inode, struct file *filp)
1460{
1461 struct scsi_tape *STp = filp->private_data;
1462
1463 if (STp->door_locked == ST_LOCKED_AUTO)
1464 do_door_lock(STp, 0);
1465
1466 normalize_buffer(STp->buffer);
1467 spin_lock(&st_use_lock);
1468 STp->in_use = 0;
1469 spin_unlock(&st_use_lock);
1470 scsi_autopm_put_device(STp->device);
1471 scsi_tape_put(STp);
1472
1473 return 0;
1474}
1475
1476/* The checks common to both reading and writing */
1477static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
1478{
1479 ssize_t retval = 0;
1480
1481 /*
1482 * If we are in the middle of error recovery, don't let anyone
1483 * else try and use this device. Also, if error recovery fails, it
1484 * may try and take the device offline, in which case all further
1485 * access to the device is prohibited.
1486 */
1487 if (!scsi_block_when_processing_errors(STp->device)) {
1488 retval = (-ENXIO);
1489 goto out;
1490 }
1491
1492 if (STp->ready != ST_READY) {
1493 if (STp->ready == ST_NO_TAPE)
1494 retval = (-ENOMEDIUM);
1495 else
1496 retval = (-EIO);
1497 goto out;
1498 }
1499
1500 if (! STp->modes[STp->current_mode].defined) {
1501 retval = (-ENXIO);
1502 goto out;
1503 }
1504
1505
1506 /*
1507 * If there was a bus reset, block further access
1508 * to this device.
1509 */
1510 if (STp->pos_unknown) {
1511 retval = (-EIO);
1512 goto out;
1513 }
1514
1515 if (count == 0)
1516 goto out;
1517
1518 DEB(
1519 if (!STp->in_use) {
1520 st_printk(ST_DEB_MSG, STp,
1521 "Incorrect device.\n");
1522 retval = (-EIO);
1523 goto out;
1524 } ) /* end DEB */
1525
1526 if (STp->can_partitions &&
1527 (retval = switch_partition(STp)) < 0)
1528 goto out;
1529
1530 if (STp->block_size == 0 && STp->max_block > 0 &&
1531 (count < STp->min_block || count > STp->max_block)) {
1532 retval = (-EINVAL);
1533 goto out;
1534 }
1535
1536 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED &&
1537 !do_door_lock(STp, 1))
1538 STp->door_locked = ST_LOCKED_AUTO;
1539
1540 out:
1541 return retval;
1542}
1543
1544
1545static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
1546 size_t count, int is_read)
1547{
1548 int i, bufsize, retval = 0;
1549 struct st_buffer *STbp = STp->buffer;
1550
1551 if (is_read)
1552 i = STp->try_dio_now && try_rdio;
1553 else
1554 i = STp->try_dio_now && try_wdio;
1555
1556 if (i && ((unsigned long)buf & queue_dma_alignment(
1557 STp->device->request_queue)) == 0) {
1558 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf,
1559 count, (is_read ? READ : WRITE));
1560 if (i > 0) {
1561 STbp->do_dio = i;
1562 STbp->buffer_bytes = 0; /* can be used as transfer counter */
1563 }
1564 else
1565 STbp->do_dio = 0; /* fall back to buffering with any error */
1566 STbp->sg_segs = STbp->do_dio;
1567 DEB(
1568 if (STbp->do_dio) {
1569 STp->nbr_dio++;
1570 STp->nbr_pages += STbp->do_dio;
1571 }
1572 )
1573 } else
1574 STbp->do_dio = 0;
1575 DEB( STp->nbr_requests++; )
1576
1577 if (!STbp->do_dio) {
1578 if (STp->block_size)
1579 bufsize = STp->block_size > st_fixed_buffer_size ?
1580 STp->block_size : st_fixed_buffer_size;
1581 else {
1582 bufsize = count;
1583 /* Make sure that data from previous user is not leaked even if
1584 HBA does not return correct residual */
1585 if (is_read && STp->sili && !STbp->cleared)
1586 clear_buffer(STbp);
1587 }
1588
1589 if (bufsize > STbp->buffer_size &&
1590 !enlarge_buffer(STbp, bufsize)) {
1591 st_printk(KERN_WARNING, STp,
1592 "Can't allocate %d byte tape buffer.\n",
1593 bufsize);
1594 retval = (-EOVERFLOW);
1595 goto out;
1596 }
1597 if (STp->block_size)
1598 STbp->buffer_blocks = bufsize / STp->block_size;
1599 }
1600
1601 out:
1602 return retval;
1603}
1604
1605
1606/* Can be called more than once after each setup_buffer() */
1607static void release_buffering(struct scsi_tape *STp, int is_read)
1608{
1609 struct st_buffer *STbp;
1610
1611 STbp = STp->buffer;
1612 if (STbp->do_dio) {
1613 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read);
1614 STbp->do_dio = 0;
1615 STbp->sg_segs = 0;
1616 }
1617}
1618
1619
1620/* Write command */
1621static ssize_t
1622st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
1623{
1624 ssize_t total;
1625 ssize_t i, do_count, blks, transfer;
1626 ssize_t retval;
1627 int undone, retry_eot = 0, scode;
1628 int async_write;
1629 unsigned char cmd[MAX_COMMAND_SIZE];
1630 const char __user *b_point;
1631 struct st_request *SRpnt = NULL;
1632 struct scsi_tape *STp = filp->private_data;
1633 struct st_modedef *STm;
1634 struct st_partstat *STps;
1635 struct st_buffer *STbp;
1636
1637 if (mutex_lock_interruptible(&STp->lock))
1638 return -ERESTARTSYS;
1639
1640 retval = rw_checks(STp, filp, count);
1641 if (retval || count == 0)
1642 goto out;
1643
1644 /* Write must be integral number of blocks */
1645 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
1646 st_printk(KERN_WARNING, STp,
1647 "Write not multiple of tape block size.\n");
1648 retval = (-EINVAL);
1649 goto out;
1650 }
1651
1652 STm = &(STp->modes[STp->current_mode]);
1653 STps = &(STp->ps[STp->partition]);
1654
1655 if (STp->write_prot) {
1656 retval = (-EACCES);
1657 goto out;
1658 }
1659
1660
1661 if (STps->rw == ST_READING) {
1662 retval = flush_buffer(STp, 0);
1663 if (retval)
1664 goto out;
1665 STps->rw = ST_WRITING;
1666 } else if (STps->rw != ST_WRITING &&
1667 STps->drv_file == 0 && STps->drv_block == 0) {
1668 if ((retval = set_mode_densblk(STp, STm)) < 0)
1669 goto out;
1670 if (STm->default_compression != ST_DONT_TOUCH &&
1671 !(STp->compression_changed)) {
1672 if (st_compression(STp, (STm->default_compression == ST_YES))) {
1673 st_printk(KERN_WARNING, STp,
1674 "Can't set default compression.\n");
1675 if (modes_defined) {
1676 retval = (-EINVAL);
1677 goto out;
1678 }
1679 }
1680 }
1681 }
1682
1683 STbp = STp->buffer;
1684 i = write_behind_check(STp);
1685 if (i) {
1686 if (i == -ENOSPC)
1687 STps->eof = ST_EOM_OK;
1688 else
1689 STps->eof = ST_EOM_ERROR;
1690 }
1691
1692 if (STps->eof == ST_EOM_OK) {
1693 STps->eof = ST_EOD_1; /* allow next write */
1694 retval = (-ENOSPC);
1695 goto out;
1696 }
1697 else if (STps->eof == ST_EOM_ERROR) {
1698 retval = (-EIO);
1699 goto out;
1700 }
1701
1702 /* Check the buffer readability in cases where copy_user might catch
1703 the problems after some tape movement. */
1704 if (STp->block_size != 0 &&
1705 !STbp->do_dio &&
1706 (copy_from_user(&i, buf, 1) != 0 ||
1707 copy_from_user(&i, buf + count - 1, 1) != 0)) {
1708 retval = (-EFAULT);
1709 goto out;
1710 }
1711
1712 retval = setup_buffering(STp, buf, count, 0);
1713 if (retval)
1714 goto out;
1715
1716 total = count;
1717
1718 memset(cmd, 0, MAX_COMMAND_SIZE);
1719 cmd[0] = WRITE_6;
1720 cmd[1] = (STp->block_size != 0);
1721
1722 STps->rw = ST_WRITING;
1723
1724 b_point = buf;
1725 while (count > 0 && !retry_eot) {
1726
1727 if (STbp->do_dio) {
1728 do_count = count;
1729 }
1730 else {
1731 if (STp->block_size == 0)
1732 do_count = count;
1733 else {
1734 do_count = STbp->buffer_blocks * STp->block_size -
1735 STbp->buffer_bytes;
1736 if (do_count > count)
1737 do_count = count;
1738 }
1739
1740 i = append_to_buffer(b_point, STbp, do_count);
1741 if (i) {
1742 retval = i;
1743 goto out;
1744 }
1745 }
1746 count -= do_count;
1747 b_point += do_count;
1748
1749 async_write = STp->block_size == 0 && !STbp->do_dio &&
1750 STm->do_async_writes && STps->eof < ST_EOM_OK;
1751
1752 if (STp->block_size != 0 && STm->do_buffer_writes &&
1753 !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
1754 STbp->buffer_bytes < STbp->buffer_size) {
1755 STp->dirty = 1;
1756 /* Don't write a buffer that is not full enough. */
1757 if (!async_write && count == 0)
1758 break;
1759 }
1760
1761 retry_write:
1762 if (STp->block_size == 0)
1763 blks = transfer = do_count;
1764 else {
1765 if (!STbp->do_dio)
1766 blks = STbp->buffer_bytes;
1767 else
1768 blks = do_count;
1769 blks /= STp->block_size;
1770 transfer = blks * STp->block_size;
1771 }
1772 cmd[2] = blks >> 16;
1773 cmd[3] = blks >> 8;
1774 cmd[4] = blks;
1775
1776 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
1777 STp->device->request_queue->rq_timeout,
1778 MAX_WRITE_RETRIES, !async_write);
1779 if (!SRpnt) {
1780 retval = STbp->syscall_result;
1781 goto out;
1782 }
1783 if (async_write && !STbp->syscall_result) {
1784 STbp->writing = transfer;
1785 STp->dirty = !(STbp->writing ==
1786 STbp->buffer_bytes);
1787 SRpnt = NULL; /* Prevent releasing this request! */
1788 DEB( STp->write_pending = 1; )
1789 break;
1790 }
1791
1792 if (STbp->syscall_result != 0) {
1793 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1794
1795 DEBC_printk(STp, "Error on write:\n");
1796 if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) {
1797 scode = cmdstatp->sense_hdr.sense_key;
1798 if (cmdstatp->remainder_valid)
1799 undone = (int)cmdstatp->uremainder64;
1800 else if (STp->block_size == 0 &&
1801 scode == VOLUME_OVERFLOW)
1802 undone = transfer;
1803 else
1804 undone = 0;
1805 if (STp->block_size != 0)
1806 undone *= STp->block_size;
1807 if (undone <= do_count) {
1808 /* Only data from this write is not written */
1809 count += undone;
1810 b_point -= undone;
1811 do_count -= undone;
1812 if (STp->block_size)
1813 blks = (transfer - undone) / STp->block_size;
1814 STps->eof = ST_EOM_OK;
1815 /* Continue in fixed block mode if all written
1816 in this request but still something left to write
1817 (retval left to zero)
1818 */
1819 if (STp->block_size == 0 ||
1820 undone > 0 || count == 0)
1821 retval = (-ENOSPC); /* EOM within current request */
1822 DEBC_printk(STp, "EOM with %d "
1823 "bytes unwritten.\n",
1824 (int)count);
1825 } else {
1826 /* EOT within data buffered earlier (possible only
1827 in fixed block mode without direct i/o) */
1828 if (!retry_eot && !cmdstatp->deferred &&
1829 (scode == NO_SENSE || scode == RECOVERED_ERROR)) {
1830 move_buffer_data(STp->buffer, transfer - undone);
1831 retry_eot = 1;
1832 if (STps->drv_block >= 0) {
1833 STps->drv_block += (transfer - undone) /
1834 STp->block_size;
1835 }
1836 STps->eof = ST_EOM_OK;
1837 DEBC_printk(STp, "Retry "
1838 "write of %d "
1839 "bytes at EOM.\n",
1840 STp->buffer->buffer_bytes);
1841 goto retry_write;
1842 }
1843 else {
1844 /* Either error within data buffered by driver or
1845 failed retry */
1846 count -= do_count;
1847 blks = do_count = 0;
1848 STps->eof = ST_EOM_ERROR;
1849 STps->drv_block = (-1); /* Too cautious? */
1850 retval = (-EIO); /* EOM for old data */
1851 DEBC_printk(STp, "EOM with "
1852 "lost data.\n");
1853 }
1854 }
1855 } else {
1856 count += do_count;
1857 STps->drv_block = (-1); /* Too cautious? */
1858 retval = STbp->syscall_result;
1859 }
1860
1861 }
1862
1863 if (STps->drv_block >= 0) {
1864 if (STp->block_size == 0)
1865 STps->drv_block += (do_count > 0);
1866 else
1867 STps->drv_block += blks;
1868 }
1869
1870 STbp->buffer_bytes = 0;
1871 STp->dirty = 0;
1872
1873 if (retval || retry_eot) {
1874 if (count < total)
1875 retval = total - count;
1876 goto out;
1877 }
1878 }
1879
1880 if (STps->eof == ST_EOD_1)
1881 STps->eof = ST_EOM_OK;
1882 else if (STps->eof != ST_EOM_OK)
1883 STps->eof = ST_NOEOF;
1884 retval = total - count;
1885
1886 out:
1887 if (SRpnt != NULL)
1888 st_release_request(SRpnt);
1889 release_buffering(STp, 0);
1890 mutex_unlock(&STp->lock);
1891
1892 return retval;
1893}
1894
1895/* Read data from the tape. Returns zero in the normal case, one if the
1896 eof status has changed, and the negative error code in case of a
1897 fatal error. Otherwise updates the buffer and the eof state.
1898
1899 Does release user buffer mapping if it is set.
1900*/
1901static long read_tape(struct scsi_tape *STp, long count,
1902 struct st_request ** aSRpnt)
1903{
1904 int transfer, blks, bytes;
1905 unsigned char cmd[MAX_COMMAND_SIZE];
1906 struct st_request *SRpnt;
1907 struct st_modedef *STm;
1908 struct st_partstat *STps;
1909 struct st_buffer *STbp;
1910 int retval = 0;
1911
1912 if (count == 0)
1913 return 0;
1914
1915 STm = &(STp->modes[STp->current_mode]);
1916 STps = &(STp->ps[STp->partition]);
1917 if (STps->eof == ST_FM_HIT)
1918 return 1;
1919 STbp = STp->buffer;
1920
1921 if (STp->block_size == 0)
1922 blks = bytes = count;
1923 else {
1924 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
1925 blks = (STp->buffer)->buffer_blocks;
1926 bytes = blks * STp->block_size;
1927 } else {
1928 bytes = count;
1929 if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size)
1930 bytes = (STp->buffer)->buffer_size;
1931 blks = bytes / STp->block_size;
1932 bytes = blks * STp->block_size;
1933 }
1934 }
1935
1936 memset(cmd, 0, MAX_COMMAND_SIZE);
1937 cmd[0] = READ_6;
1938 cmd[1] = (STp->block_size != 0);
1939 if (!cmd[1] && STp->sili)
1940 cmd[1] |= 2;
1941 cmd[2] = blks >> 16;
1942 cmd[3] = blks >> 8;
1943 cmd[4] = blks;
1944
1945 SRpnt = *aSRpnt;
1946 SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE,
1947 STp->device->request_queue->rq_timeout,
1948 MAX_RETRIES, 1);
1949 release_buffering(STp, 1);
1950 *aSRpnt = SRpnt;
1951 if (!SRpnt)
1952 return STbp->syscall_result;
1953
1954 STbp->read_pointer = 0;
1955 STps->at_sm = 0;
1956
1957 /* Something to check */
1958 if (STbp->syscall_result) {
1959 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1960
1961 retval = 1;
1962 DEBC_printk(STp,
1963 "Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1964 SRpnt->sense[0], SRpnt->sense[1],
1965 SRpnt->sense[2], SRpnt->sense[3],
1966 SRpnt->sense[4], SRpnt->sense[5],
1967 SRpnt->sense[6], SRpnt->sense[7]);
1968 if (cmdstatp->have_sense) {
1969
1970 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
1971 cmdstatp->flags &= 0xcf; /* No need for EOM in this case */
1972
1973 if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */
1974 /* Compute the residual count */
1975 if (cmdstatp->remainder_valid)
1976 transfer = (int)cmdstatp->uremainder64;
1977 else
1978 transfer = 0;
1979 if (cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR) {
1980 if (STp->block_size == 0)
1981 transfer = bytes;
1982 /* Some drives set ILI with MEDIUM ERROR */
1983 cmdstatp->flags &= ~SENSE_ILI;
1984 }
1985
1986 if (cmdstatp->flags & SENSE_ILI) { /* ILI */
1987 if (STp->block_size == 0 &&
1988 transfer < 0) {
1989 st_printk(KERN_NOTICE, STp,
1990 "Failed to read %d "
1991 "byte block with %d "
1992 "byte transfer.\n",
1993 bytes - transfer,
1994 bytes);
1995 if (STps->drv_block >= 0)
1996 STps->drv_block += 1;
1997 STbp->buffer_bytes = 0;
1998 return (-ENOMEM);
1999 } else if (STp->block_size == 0) {
2000 STbp->buffer_bytes = bytes - transfer;
2001 } else {
2002 st_release_request(SRpnt);
2003 SRpnt = *aSRpnt = NULL;
2004 if (transfer == blks) { /* We did not get anything, error */
2005 st_printk(KERN_NOTICE, STp,
2006 "Incorrect "
2007 "block size.\n");
2008 if (STps->drv_block >= 0)
2009 STps->drv_block += blks - transfer + 1;
2010 st_int_ioctl(STp, MTBSR, 1);
2011 return (-EIO);
2012 }
2013 /* We have some data, deliver it */
2014 STbp->buffer_bytes = (blks - transfer) *
2015 STp->block_size;
2016 DEBC_printk(STp, "ILI but "
2017 "enough data "
2018 "received %ld "
2019 "%d.\n", count,
2020 STbp->buffer_bytes);
2021 if (STps->drv_block >= 0)
2022 STps->drv_block += 1;
2023 if (st_int_ioctl(STp, MTBSR, 1))
2024 return (-EIO);
2025 }
2026 } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */
2027 if (STps->eof != ST_FM_HIT)
2028 STps->eof = ST_FM_HIT;
2029 else
2030 STps->eof = ST_EOD_2;
2031 if (STp->block_size == 0)
2032 STbp->buffer_bytes = 0;
2033 else
2034 STbp->buffer_bytes =
2035 bytes - transfer * STp->block_size;
2036 DEBC_printk(STp, "EOF detected (%d "
2037 "bytes read).\n",
2038 STbp->buffer_bytes);
2039 } else if (cmdstatp->flags & SENSE_EOM) {
2040 if (STps->eof == ST_FM)
2041 STps->eof = ST_EOD_1;
2042 else
2043 STps->eof = ST_EOM_OK;
2044 if (STp->block_size == 0)
2045 STbp->buffer_bytes = bytes - transfer;
2046 else
2047 STbp->buffer_bytes =
2048 bytes - transfer * STp->block_size;
2049
2050 DEBC_printk(STp, "EOM detected (%d "
2051 "bytes read).\n",
2052 STbp->buffer_bytes);
2053 }
2054 }
2055 /* end of EOF, EOM, ILI test */
2056 else { /* nonzero sense key */
2057 DEBC_printk(STp, "Tape error while reading.\n");
2058 STps->drv_block = (-1);
2059 if (STps->eof == ST_FM &&
2060 cmdstatp->sense_hdr.sense_key == BLANK_CHECK) {
2061 DEBC_printk(STp, "Zero returned for "
2062 "first BLANK CHECK "
2063 "after EOF.\n");
2064 STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */
2065 } else /* Some other extended sense code */
2066 retval = (-EIO);
2067 }
2068
2069 if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */
2070 STbp->buffer_bytes = 0;
2071 }
2072 /* End of extended sense test */
2073 else { /* Non-extended sense */
2074 retval = STbp->syscall_result;
2075 }
2076
2077 }
2078 /* End of error handling */
2079 else { /* Read successful */
2080 STbp->buffer_bytes = bytes;
2081 if (STp->sili) /* In fixed block mode residual is always zero here */
2082 STbp->buffer_bytes -= STp->buffer->cmdstat.residual;
2083 }
2084
2085 if (STps->drv_block >= 0) {
2086 if (STp->block_size == 0)
2087 STps->drv_block++;
2088 else
2089 STps->drv_block += STbp->buffer_bytes / STp->block_size;
2090 }
2091 return retval;
2092}
2093
2094
2095/* Read command */
2096static ssize_t
2097st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
2098{
2099 ssize_t total;
2100 ssize_t retval = 0;
2101 ssize_t i, transfer;
2102 int special, do_dio = 0;
2103 struct st_request *SRpnt = NULL;
2104 struct scsi_tape *STp = filp->private_data;
2105 struct st_modedef *STm;
2106 struct st_partstat *STps;
2107 struct st_buffer *STbp = STp->buffer;
2108
2109 if (mutex_lock_interruptible(&STp->lock))
2110 return -ERESTARTSYS;
2111
2112 retval = rw_checks(STp, filp, count);
2113 if (retval || count == 0)
2114 goto out;
2115
2116 STm = &(STp->modes[STp->current_mode]);
2117 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
2118 if (!STm->do_read_ahead) {
2119 retval = (-EINVAL); /* Read must be integral number of blocks */
2120 goto out;
2121 }
2122 STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */
2123 }
2124
2125 STps = &(STp->ps[STp->partition]);
2126 if (STps->rw == ST_WRITING) {
2127 retval = flush_buffer(STp, 0);
2128 if (retval)
2129 goto out;
2130 STps->rw = ST_READING;
2131 }
2132 DEB(
2133 if (debugging && STps->eof != ST_NOEOF)
2134 st_printk(ST_DEB_MSG, STp,
2135 "EOF/EOM flag up (%d). Bytes %d\n",
2136 STps->eof, STbp->buffer_bytes);
2137 ) /* end DEB */
2138
2139 retval = setup_buffering(STp, buf, count, 1);
2140 if (retval)
2141 goto out;
2142 do_dio = STbp->do_dio;
2143
2144 if (STbp->buffer_bytes == 0 &&
2145 STps->eof >= ST_EOD_1) {
2146 if (STps->eof < ST_EOD) {
2147 STps->eof += 1;
2148 retval = 0;
2149 goto out;
2150 }
2151 retval = (-EIO); /* EOM or Blank Check */
2152 goto out;
2153 }
2154
2155 if (do_dio) {
2156 /* Check the buffer writability before any tape movement. Don't alter
2157 buffer data. */
2158 if (copy_from_user(&i, buf, 1) != 0 ||
2159 copy_to_user(buf, &i, 1) != 0 ||
2160 copy_from_user(&i, buf + count - 1, 1) != 0 ||
2161 copy_to_user(buf + count - 1, &i, 1) != 0) {
2162 retval = (-EFAULT);
2163 goto out;
2164 }
2165 }
2166
2167 STps->rw = ST_READING;
2168
2169
2170 /* Loop until enough data in buffer or a special condition found */
2171 for (total = 0, special = 0; total < count && !special;) {
2172
2173 /* Get new data if the buffer is empty */
2174 if (STbp->buffer_bytes == 0) {
2175 special = read_tape(STp, count - total, &SRpnt);
2176 if (special < 0) { /* No need to continue read */
2177 retval = special;
2178 goto out;
2179 }
2180 }
2181
2182 /* Move the data from driver buffer to user buffer */
2183 if (STbp->buffer_bytes > 0) {
2184 DEB(
2185 if (debugging && STps->eof != ST_NOEOF)
2186 st_printk(ST_DEB_MSG, STp,
2187 "EOF up (%d). Left %d, needed %d.\n",
2188 STps->eof, STbp->buffer_bytes,
2189 (int)(count - total));
2190 ) /* end DEB */
2191 transfer = STbp->buffer_bytes < count - total ?
2192 STbp->buffer_bytes : count - total;
2193 if (!do_dio) {
2194 i = from_buffer(STbp, buf, transfer);
2195 if (i) {
2196 retval = i;
2197 goto out;
2198 }
2199 }
2200 buf += transfer;
2201 total += transfer;
2202 }
2203
2204 if (STp->block_size == 0)
2205 break; /* Read only one variable length block */
2206
2207 } /* for (total = 0, special = 0;
2208 total < count && !special; ) */
2209
2210 /* Change the eof state if no data from tape or buffer */
2211 if (total == 0) {
2212 if (STps->eof == ST_FM_HIT) {
2213 STps->eof = ST_FM;
2214 STps->drv_block = 0;
2215 if (STps->drv_file >= 0)
2216 STps->drv_file++;
2217 } else if (STps->eof == ST_EOD_1) {
2218 STps->eof = ST_EOD_2;
2219 STps->drv_block = 0;
2220 if (STps->drv_file >= 0)
2221 STps->drv_file++;
2222 } else if (STps->eof == ST_EOD_2)
2223 STps->eof = ST_EOD;
2224 } else if (STps->eof == ST_FM)
2225 STps->eof = ST_NOEOF;
2226 retval = total;
2227
2228 out:
2229 if (SRpnt != NULL) {
2230 st_release_request(SRpnt);
2231 SRpnt = NULL;
2232 }
2233 if (do_dio) {
2234 release_buffering(STp, 1);
2235 STbp->buffer_bytes = 0;
2236 }
2237 mutex_unlock(&STp->lock);
2238
2239 return retval;
2240}
2241
2242
2243
2244DEB(
2245/* Set the driver options */
2246static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm)
2247{
2248 if (debugging) {
2249 st_printk(KERN_INFO, STp,
2250 "Mode %d options: buffer writes: %d, "
2251 "async writes: %d, read ahead: %d\n",
2252 STp->current_mode, STm->do_buffer_writes,
2253 STm->do_async_writes, STm->do_read_ahead);
2254 st_printk(KERN_INFO, STp,
2255 " can bsr: %d, two FMs: %d, "
2256 "fast mteom: %d, auto lock: %d,\n",
2257 STp->can_bsr, STp->two_fm, STp->fast_mteom,
2258 STp->do_auto_lock);
2259 st_printk(KERN_INFO, STp,
2260 " defs for wr: %d, no block limits: %d, "
2261 "partitions: %d, s2 log: %d\n",
2262 STm->defaults_for_writes, STp->omit_blklims,
2263 STp->can_partitions, STp->scsi2_logical);
2264 st_printk(KERN_INFO, STp,
2265 " sysv: %d nowait: %d sili: %d "
2266 "nowait_filemark: %d\n",
2267 STm->sysv, STp->immediate, STp->sili,
2268 STp->immediate_filemark);
2269 st_printk(KERN_INFO, STp, " debugging: %d\n", debugging);
2270 }
2271}
2272 )
2273
2274
2275static int st_set_options(struct scsi_tape *STp, long options)
2276{
2277 int value;
2278 long code;
2279 struct st_modedef *STm;
2280 struct cdev *cd0, *cd1;
2281 struct device *d0, *d1;
2282
2283 STm = &(STp->modes[STp->current_mode]);
2284 if (!STm->defined) {
2285 cd0 = STm->cdevs[0];
2286 cd1 = STm->cdevs[1];
2287 d0 = STm->devs[0];
2288 d1 = STm->devs[1];
2289 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef));
2290 STm->cdevs[0] = cd0;
2291 STm->cdevs[1] = cd1;
2292 STm->devs[0] = d0;
2293 STm->devs[1] = d1;
2294 modes_defined = 1;
2295 DEBC_printk(STp, "Initialized mode %d definition from mode 0\n",
2296 STp->current_mode);
2297 }
2298
2299 code = options & MT_ST_OPTIONS;
2300 if (code == MT_ST_BOOLEANS) {
2301 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
2302 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
2303 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
2304 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
2305 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
2306 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
2307 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
2308 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
2309 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
2310 if ((STp->device)->scsi_level >= SCSI_2)
2311 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
2312 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
2313 STp->immediate = (options & MT_ST_NOWAIT) != 0;
2314 STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0;
2315 STm->sysv = (options & MT_ST_SYSV) != 0;
2316 STp->sili = (options & MT_ST_SILI) != 0;
2317 DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
2318 st_log_options(STp, STm); )
2319 } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
2320 value = (code == MT_ST_SETBOOLEANS);
2321 if ((options & MT_ST_BUFFER_WRITES) != 0)
2322 STm->do_buffer_writes = value;
2323 if ((options & MT_ST_ASYNC_WRITES) != 0)
2324 STm->do_async_writes = value;
2325 if ((options & MT_ST_DEF_WRITES) != 0)
2326 STm->defaults_for_writes = value;
2327 if ((options & MT_ST_READ_AHEAD) != 0)
2328 STm->do_read_ahead = value;
2329 if ((options & MT_ST_TWO_FM) != 0)
2330 STp->two_fm = value;
2331 if ((options & MT_ST_FAST_MTEOM) != 0)
2332 STp->fast_mteom = value;
2333 if ((options & MT_ST_AUTO_LOCK) != 0)
2334 STp->do_auto_lock = value;
2335 if ((options & MT_ST_CAN_BSR) != 0)
2336 STp->can_bsr = value;
2337 if ((options & MT_ST_NO_BLKLIMS) != 0)
2338 STp->omit_blklims = value;
2339 if ((STp->device)->scsi_level >= SCSI_2 &&
2340 (options & MT_ST_CAN_PARTITIONS) != 0)
2341 STp->can_partitions = value;
2342 if ((options & MT_ST_SCSI2LOGICAL) != 0)
2343 STp->scsi2_logical = value;
2344 if ((options & MT_ST_NOWAIT) != 0)
2345 STp->immediate = value;
2346 if ((options & MT_ST_NOWAIT_EOF) != 0)
2347 STp->immediate_filemark = value;
2348 if ((options & MT_ST_SYSV) != 0)
2349 STm->sysv = value;
2350 if ((options & MT_ST_SILI) != 0)
2351 STp->sili = value;
2352 DEB(
2353 if ((options & MT_ST_DEBUGGING) != 0)
2354 debugging = value;
2355 st_log_options(STp, STm); )
2356 } else if (code == MT_ST_WRITE_THRESHOLD) {
2357 /* Retained for compatibility */
2358 } else if (code == MT_ST_DEF_BLKSIZE) {
2359 value = (options & ~MT_ST_OPTIONS);
2360 if (value == ~MT_ST_OPTIONS) {
2361 STm->default_blksize = (-1);
2362 DEBC_printk(STp, "Default block size disabled.\n");
2363 } else {
2364 STm->default_blksize = value;
2365 DEBC_printk(STp,"Default block size set to "
2366 "%d bytes.\n", STm->default_blksize);
2367 if (STp->ready == ST_READY) {
2368 STp->blksize_changed = 0;
2369 set_mode_densblk(STp, STm);
2370 }
2371 }
2372 } else if (code == MT_ST_TIMEOUTS) {
2373 value = (options & ~MT_ST_OPTIONS);
2374 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
2375 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
2376 DEBC_printk(STp, "Long timeout set to %d seconds.\n",
2377 (value & ~MT_ST_SET_LONG_TIMEOUT));
2378 } else {
2379 blk_queue_rq_timeout(STp->device->request_queue,
2380 value * HZ);
2381 DEBC_printk(STp, "Normal timeout set to %d seconds.\n",
2382 value);
2383 }
2384 } else if (code == MT_ST_SET_CLN) {
2385 value = (options & ~MT_ST_OPTIONS) & 0xff;
2386 if (value != 0 &&
2387 (value < EXTENDED_SENSE_START ||
2388 value >= SCSI_SENSE_BUFFERSIZE))
2389 return (-EINVAL);
2390 STp->cln_mode = value;
2391 STp->cln_sense_mask = (options >> 8) & 0xff;
2392 STp->cln_sense_value = (options >> 16) & 0xff;
2393 st_printk(KERN_INFO, STp,
2394 "Cleaning request mode %d, mask %02x, value %02x\n",
2395 value, STp->cln_sense_mask, STp->cln_sense_value);
2396 } else if (code == MT_ST_DEF_OPTIONS) {
2397 code = (options & ~MT_ST_CLEAR_DEFAULT);
2398 value = (options & MT_ST_CLEAR_DEFAULT);
2399 if (code == MT_ST_DEF_DENSITY) {
2400 if (value == MT_ST_CLEAR_DEFAULT) {
2401 STm->default_density = (-1);
2402 DEBC_printk(STp,
2403 "Density default disabled.\n");
2404 } else {
2405 STm->default_density = value & 0xff;
2406 DEBC_printk(STp, "Density default set to %x\n",
2407 STm->default_density);
2408 if (STp->ready == ST_READY) {
2409 STp->density_changed = 0;
2410 set_mode_densblk(STp, STm);
2411 }
2412 }
2413 } else if (code == MT_ST_DEF_DRVBUFFER) {
2414 if (value == MT_ST_CLEAR_DEFAULT) {
2415 STp->default_drvbuffer = 0xff;
2416 DEBC_printk(STp,
2417 "Drive buffer default disabled.\n");
2418 } else {
2419 STp->default_drvbuffer = value & 7;
2420 DEBC_printk(STp,
2421 "Drive buffer default set to %x\n",
2422 STp->default_drvbuffer);
2423 if (STp->ready == ST_READY)
2424 st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer);
2425 }
2426 } else if (code == MT_ST_DEF_COMPRESSION) {
2427 if (value == MT_ST_CLEAR_DEFAULT) {
2428 STm->default_compression = ST_DONT_TOUCH;
2429 DEBC_printk(STp,
2430 "Compression default disabled.\n");
2431 } else {
2432 if ((value & 0xff00) != 0) {
2433 STp->c_algo = (value & 0xff00) >> 8;
2434 DEBC_printk(STp, "Compression "
2435 "algorithm set to 0x%x.\n",
2436 STp->c_algo);
2437 }
2438 if ((value & 0xff) != 0xff) {
2439 STm->default_compression = (value & 1 ? ST_YES : ST_NO);
2440 DEBC_printk(STp, "Compression default "
2441 "set to %x\n",
2442 (value & 1));
2443 if (STp->ready == ST_READY) {
2444 STp->compression_changed = 0;
2445 st_compression(STp, (STm->default_compression == ST_YES));
2446 }
2447 }
2448 }
2449 }
2450 } else
2451 return (-EIO);
2452
2453 return 0;
2454}
2455
2456#define MODE_HEADER_LENGTH 4
2457
2458/* Mode header and page byte offsets */
2459#define MH_OFF_DATA_LENGTH 0
2460#define MH_OFF_MEDIUM_TYPE 1
2461#define MH_OFF_DEV_SPECIFIC 2
2462#define MH_OFF_BDESCS_LENGTH 3
2463#define MP_OFF_PAGE_NBR 0
2464#define MP_OFF_PAGE_LENGTH 1
2465
2466/* Mode header and page bit masks */
2467#define MH_BIT_WP 0x80
2468#define MP_MSK_PAGE_NBR 0x3f
2469
2470/* Don't return block descriptors */
2471#define MODE_SENSE_OMIT_BDESCS 0x08
2472
2473#define MODE_SELECT_PAGE_FORMAT 0x10
2474
2475/* Read a mode page into the tape buffer. The block descriptors are included
2476 if incl_block_descs is true. The page control is ored to the page number
2477 parameter, if necessary. */
2478static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs)
2479{
2480 unsigned char cmd[MAX_COMMAND_SIZE];
2481 struct st_request *SRpnt;
2482
2483 memset(cmd, 0, MAX_COMMAND_SIZE);
2484 cmd[0] = MODE_SENSE;
2485 if (omit_block_descs)
2486 cmd[1] = MODE_SENSE_OMIT_BDESCS;
2487 cmd[2] = page;
2488 cmd[4] = 255;
2489
2490 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE,
2491 STp->device->request_queue->rq_timeout, 0, 1);
2492 if (SRpnt == NULL)
2493 return (STp->buffer)->syscall_result;
2494
2495 st_release_request(SRpnt);
2496
2497 return STp->buffer->syscall_result;
2498}
2499
2500
2501/* Send the mode page in the tape buffer to the drive. Assumes that the mode data
2502 in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */
2503static int write_mode_page(struct scsi_tape *STp, int page, int slow)
2504{
2505 int pgo;
2506 unsigned char cmd[MAX_COMMAND_SIZE];
2507 struct st_request *SRpnt;
2508 int timeout;
2509
2510 memset(cmd, 0, MAX_COMMAND_SIZE);
2511 cmd[0] = MODE_SELECT;
2512 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2513 pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH];
2514 cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2;
2515
2516 /* Clear reserved fields */
2517 (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0;
2518 (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0;
2519 (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP;
2520 (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR;
2521
2522 timeout = slow ?
2523 STp->long_timeout : STp->device->request_queue->rq_timeout;
2524 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE,
2525 timeout, 0, 1);
2526 if (SRpnt == NULL)
2527 return (STp->buffer)->syscall_result;
2528
2529 st_release_request(SRpnt);
2530
2531 return STp->buffer->syscall_result;
2532}
2533
2534
2535#define COMPRESSION_PAGE 0x0f
2536#define COMPRESSION_PAGE_LENGTH 16
2537
2538#define CP_OFF_DCE_DCC 2
2539#define CP_OFF_C_ALGO 7
2540
2541#define DCE_MASK 0x80
2542#define DCC_MASK 0x40
2543#define RED_MASK 0x60
2544
2545
2546/* Control the compression with mode page 15. Algorithm not changed if zero.
2547
2548 The block descriptors are read and written because Sony SDT-7000 does not
2549 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
2550 Including block descriptors should not cause any harm to other drives. */
2551
2552static int st_compression(struct scsi_tape * STp, int state)
2553{
2554 int retval;
2555 int mpoffs; /* Offset to mode page start */
2556 unsigned char *b_data = (STp->buffer)->b_data;
2557
2558 if (STp->ready != ST_READY)
2559 return (-EIO);
2560
2561 /* Read the current page contents */
2562 retval = read_mode_page(STp, COMPRESSION_PAGE, 0);
2563 if (retval) {
2564 DEBC_printk(STp, "Compression mode page not supported.\n");
2565 return (-EIO);
2566 }
2567
2568 mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH];
2569 DEBC_printk(STp, "Compression state is %d.\n",
2570 (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0));
2571
2572 /* Check if compression can be changed */
2573 if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) {
2574 DEBC_printk(STp, "Compression not supported.\n");
2575 return (-EIO);
2576 }
2577
2578 /* Do the change */
2579 if (state) {
2580 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK;
2581 if (STp->c_algo != 0)
2582 b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo;
2583 }
2584 else {
2585 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK;
2586 if (STp->c_algo != 0)
2587 b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */
2588 }
2589
2590 retval = write_mode_page(STp, COMPRESSION_PAGE, 0);
2591 if (retval) {
2592 DEBC_printk(STp, "Compression change failed.\n");
2593 return (-EIO);
2594 }
2595 DEBC_printk(STp, "Compression state changed to %d.\n", state);
2596
2597 STp->compression_changed = 1;
2598 return 0;
2599}
2600
2601
2602/* Process the load and unload commands (does unload if the load code is zero) */
2603static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code)
2604{
2605 int retval = (-EIO), timeout;
2606 unsigned char cmd[MAX_COMMAND_SIZE];
2607 struct st_partstat *STps;
2608 struct st_request *SRpnt;
2609
2610 if (STp->ready != ST_READY && !load_code) {
2611 if (STp->ready == ST_NO_TAPE)
2612 return (-ENOMEDIUM);
2613 else
2614 return (-EIO);
2615 }
2616
2617 memset(cmd, 0, MAX_COMMAND_SIZE);
2618 cmd[0] = START_STOP;
2619 if (load_code)
2620 cmd[4] |= 1;
2621 /*
2622 * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A
2623 */
2624 if (load_code >= 1 + MT_ST_HPLOADER_OFFSET
2625 && load_code <= 6 + MT_ST_HPLOADER_OFFSET) {
2626 DEBC_printk(STp, " Enhanced %sload slot %2d.\n",
2627 (cmd[4]) ? "" : "un",
2628 load_code - MT_ST_HPLOADER_OFFSET);
2629 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */
2630 }
2631 if (STp->immediate) {
2632 cmd[1] = 1; /* Don't wait for completion */
2633 timeout = STp->device->request_queue->rq_timeout;
2634 }
2635 else
2636 timeout = STp->long_timeout;
2637
2638 DEBC(
2639 if (!load_code)
2640 st_printk(ST_DEB_MSG, STp, "Unloading tape.\n");
2641 else
2642 st_printk(ST_DEB_MSG, STp, "Loading tape.\n");
2643 );
2644
2645 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
2646 timeout, MAX_RETRIES, 1);
2647 if (!SRpnt)
2648 return (STp->buffer)->syscall_result;
2649
2650 retval = (STp->buffer)->syscall_result;
2651 st_release_request(SRpnt);
2652
2653 if (!retval) { /* SCSI command successful */
2654
2655 if (!load_code) {
2656 STp->rew_at_close = 0;
2657 STp->ready = ST_NO_TAPE;
2658 }
2659 else {
2660 STp->rew_at_close = STp->autorew_dev;
2661 retval = check_tape(STp, filp);
2662 if (retval > 0)
2663 retval = 0;
2664 }
2665 }
2666 else {
2667 STps = &(STp->ps[STp->partition]);
2668 STps->drv_file = STps->drv_block = (-1);
2669 }
2670
2671 return retval;
2672}
2673
2674#if DEBUG
2675#define ST_DEB_FORWARD 0
2676#define ST_DEB_BACKWARD 1
2677static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd)
2678{
2679 s32 sc;
2680
2681 if (!debugging)
2682 return;
2683
2684 sc = sign_extend32(get_unaligned_be24(&cmd[2]), 23);
2685 if (direction)
2686 sc = -sc;
2687 st_printk(ST_DEB_MSG, STp, "Spacing tape %s over %d %s.\n",
2688 direction ? "backward" : "forward", sc, units);
2689}
2690#else
2691#define ST_DEB_FORWARD 0
2692#define ST_DEB_BACKWARD 1
2693static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd) {}
2694#endif
2695
2696
2697/* Internal ioctl function */
2698static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg)
2699{
2700 int timeout;
2701 long ltmp;
2702 int ioctl_result;
2703 int chg_eof = 1;
2704 unsigned char cmd[MAX_COMMAND_SIZE];
2705 struct st_request *SRpnt;
2706 struct st_partstat *STps;
2707 int fileno, blkno, at_sm, undone;
2708 int datalen = 0, direction = DMA_NONE;
2709
2710 WARN_ON(STp->buffer->do_dio != 0);
2711 if (STp->ready != ST_READY) {
2712 if (STp->ready == ST_NO_TAPE)
2713 return (-ENOMEDIUM);
2714 else
2715 return (-EIO);
2716 }
2717 timeout = STp->long_timeout;
2718 STps = &(STp->ps[STp->partition]);
2719 fileno = STps->drv_file;
2720 blkno = STps->drv_block;
2721 at_sm = STps->at_sm;
2722
2723 memset(cmd, 0, MAX_COMMAND_SIZE);
2724 switch (cmd_in) {
2725 case MTFSFM:
2726 chg_eof = 0; /* Changed from the FSF after this */
2727 fallthrough;
2728 case MTFSF:
2729 cmd[0] = SPACE;
2730 cmd[1] = 0x01; /* Space FileMarks */
2731 cmd[2] = (arg >> 16);
2732 cmd[3] = (arg >> 8);
2733 cmd[4] = arg;
2734 deb_space_print(STp, ST_DEB_FORWARD, "filemarks", cmd);
2735 if (fileno >= 0)
2736 fileno += arg;
2737 blkno = 0;
2738 at_sm &= (arg == 0);
2739 break;
2740 case MTBSFM:
2741 chg_eof = 0; /* Changed from the FSF after this */
2742 fallthrough;
2743 case MTBSF:
2744 cmd[0] = SPACE;
2745 cmd[1] = 0x01; /* Space FileMarks */
2746 ltmp = (-arg);
2747 cmd[2] = (ltmp >> 16);
2748 cmd[3] = (ltmp >> 8);
2749 cmd[4] = ltmp;
2750 deb_space_print(STp, ST_DEB_BACKWARD, "filemarks", cmd);
2751 if (fileno >= 0)
2752 fileno -= arg;
2753 blkno = (-1); /* We can't know the block number */
2754 at_sm &= (arg == 0);
2755 break;
2756 case MTFSR:
2757 cmd[0] = SPACE;
2758 cmd[1] = 0x00; /* Space Blocks */
2759 cmd[2] = (arg >> 16);
2760 cmd[3] = (arg >> 8);
2761 cmd[4] = arg;
2762 deb_space_print(STp, ST_DEB_FORWARD, "blocks", cmd);
2763 if (blkno >= 0)
2764 blkno += arg;
2765 at_sm &= (arg == 0);
2766 break;
2767 case MTBSR:
2768 cmd[0] = SPACE;
2769 cmd[1] = 0x00; /* Space Blocks */
2770 ltmp = (-arg);
2771 cmd[2] = (ltmp >> 16);
2772 cmd[3] = (ltmp >> 8);
2773 cmd[4] = ltmp;
2774 deb_space_print(STp, ST_DEB_BACKWARD, "blocks", cmd);
2775 if (blkno >= 0)
2776 blkno -= arg;
2777 at_sm &= (arg == 0);
2778 break;
2779 case MTFSS:
2780 cmd[0] = SPACE;
2781 cmd[1] = 0x04; /* Space Setmarks */
2782 cmd[2] = (arg >> 16);
2783 cmd[3] = (arg >> 8);
2784 cmd[4] = arg;
2785 deb_space_print(STp, ST_DEB_FORWARD, "setmarks", cmd);
2786 if (arg != 0) {
2787 blkno = fileno = (-1);
2788 at_sm = 1;
2789 }
2790 break;
2791 case MTBSS:
2792 cmd[0] = SPACE;
2793 cmd[1] = 0x04; /* Space Setmarks */
2794 ltmp = (-arg);
2795 cmd[2] = (ltmp >> 16);
2796 cmd[3] = (ltmp >> 8);
2797 cmd[4] = ltmp;
2798 deb_space_print(STp, ST_DEB_BACKWARD, "setmarks", cmd);
2799 if (arg != 0) {
2800 blkno = fileno = (-1);
2801 at_sm = 1;
2802 }
2803 break;
2804 case MTWEOF:
2805 case MTWEOFI:
2806 case MTWSM:
2807 if (STp->write_prot)
2808 return (-EACCES);
2809 cmd[0] = WRITE_FILEMARKS;
2810 if (cmd_in == MTWSM)
2811 cmd[1] = 2;
2812 if (cmd_in == MTWEOFI ||
2813 (cmd_in == MTWEOF && STp->immediate_filemark))
2814 cmd[1] |= 1;
2815 cmd[2] = (arg >> 16);
2816 cmd[3] = (arg >> 8);
2817 cmd[4] = arg;
2818 timeout = STp->device->request_queue->rq_timeout;
2819 DEBC(
2820 if (cmd_in != MTWSM)
2821 st_printk(ST_DEB_MSG, STp,
2822 "Writing %d filemarks.\n",
2823 cmd[2] * 65536 +
2824 cmd[3] * 256 +
2825 cmd[4]);
2826 else
2827 st_printk(ST_DEB_MSG, STp,
2828 "Writing %d setmarks.\n",
2829 cmd[2] * 65536 +
2830 cmd[3] * 256 +
2831 cmd[4]);
2832 )
2833 if (fileno >= 0)
2834 fileno += arg;
2835 blkno = 0;
2836 at_sm = (cmd_in == MTWSM);
2837 break;
2838 case MTREW:
2839 cmd[0] = REZERO_UNIT;
2840 if (STp->immediate) {
2841 cmd[1] = 1; /* Don't wait for completion */
2842 timeout = STp->device->request_queue->rq_timeout;
2843 }
2844 DEBC_printk(STp, "Rewinding tape.\n");
2845 fileno = blkno = at_sm = 0;
2846 break;
2847 case MTNOP:
2848 DEBC_printk(STp, "No op on tape.\n");
2849 return 0; /* Should do something ? */
2850 case MTRETEN:
2851 cmd[0] = START_STOP;
2852 if (STp->immediate) {
2853 cmd[1] = 1; /* Don't wait for completion */
2854 timeout = STp->device->request_queue->rq_timeout;
2855 }
2856 cmd[4] = 3;
2857 DEBC_printk(STp, "Retensioning tape.\n");
2858 fileno = blkno = at_sm = 0;
2859 break;
2860 case MTEOM:
2861 if (!STp->fast_mteom) {
2862 /* space to the end of tape */
2863 ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff);
2864 fileno = STps->drv_file;
2865 if (STps->eof >= ST_EOD_1)
2866 return 0;
2867 /* The next lines would hide the number of spaced FileMarks
2868 That's why I inserted the previous lines. I had no luck
2869 with detecting EOM with FSF, so we go now to EOM.
2870 Joerg Weule */
2871 } else
2872 fileno = (-1);
2873 cmd[0] = SPACE;
2874 cmd[1] = 3;
2875 DEBC_printk(STp, "Spacing to end of recorded medium.\n");
2876 blkno = -1;
2877 at_sm = 0;
2878 break;
2879 case MTERASE:
2880 if (STp->write_prot)
2881 return (-EACCES);
2882 cmd[0] = ERASE;
2883 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */
2884 if (STp->immediate) {
2885 cmd[1] |= 2; /* Don't wait for completion */
2886 timeout = STp->device->request_queue->rq_timeout;
2887 }
2888 else
2889 timeout = STp->long_timeout * 8;
2890
2891 DEBC_printk(STp, "Erasing tape.\n");
2892 fileno = blkno = at_sm = 0;
2893 break;
2894 case MTSETBLK: /* Set block length */
2895 case MTSETDENSITY: /* Set tape density */
2896 case MTSETDRVBUFFER: /* Set drive buffering */
2897 case SET_DENS_AND_BLK: /* Set density and block size */
2898 chg_eof = 0;
2899 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
2900 return (-EIO); /* Not allowed if data in buffer */
2901 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
2902 (arg & MT_ST_BLKSIZE_MASK) != 0 &&
2903 STp->max_block > 0 &&
2904 ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block ||
2905 (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) {
2906 st_printk(KERN_WARNING, STp, "Illegal block size.\n");
2907 return (-EINVAL);
2908 }
2909 cmd[0] = MODE_SELECT;
2910 if ((STp->use_pf & USE_PF))
2911 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2912 cmd[4] = datalen = 12;
2913 direction = DMA_TO_DEVICE;
2914
2915 memset((STp->buffer)->b_data, 0, 12);
2916 if (cmd_in == MTSETDRVBUFFER)
2917 (STp->buffer)->b_data[2] = (arg & 7) << 4;
2918 else
2919 (STp->buffer)->b_data[2] =
2920 STp->drv_buffer << 4;
2921 (STp->buffer)->b_data[3] = 8; /* block descriptor length */
2922 if (cmd_in == MTSETDENSITY) {
2923 (STp->buffer)->b_data[4] = arg;
2924 STp->density_changed = 1; /* At least we tried ;-) */
2925 } else if (cmd_in == SET_DENS_AND_BLK)
2926 (STp->buffer)->b_data[4] = arg >> 24;
2927 else
2928 (STp->buffer)->b_data[4] = STp->density;
2929 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2930 ltmp = arg & MT_ST_BLKSIZE_MASK;
2931 if (cmd_in == MTSETBLK)
2932 STp->blksize_changed = 1; /* At least we tried ;-) */
2933 } else
2934 ltmp = STp->block_size;
2935 (STp->buffer)->b_data[9] = (ltmp >> 16);
2936 (STp->buffer)->b_data[10] = (ltmp >> 8);
2937 (STp->buffer)->b_data[11] = ltmp;
2938 timeout = STp->device->request_queue->rq_timeout;
2939 DEBC(
2940 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK)
2941 st_printk(ST_DEB_MSG, STp,
2942 "Setting block size to %d bytes.\n",
2943 (STp->buffer)->b_data[9] * 65536 +
2944 (STp->buffer)->b_data[10] * 256 +
2945 (STp->buffer)->b_data[11]);
2946 if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK)
2947 st_printk(ST_DEB_MSG, STp,
2948 "Setting density code to %x.\n",
2949 (STp->buffer)->b_data[4]);
2950 if (cmd_in == MTSETDRVBUFFER)
2951 st_printk(ST_DEB_MSG, STp,
2952 "Setting drive buffer code to %d.\n",
2953 ((STp->buffer)->b_data[2] >> 4) & 7);
2954 )
2955 break;
2956 default:
2957 return (-ENOSYS);
2958 }
2959
2960 SRpnt = st_do_scsi(NULL, STp, cmd, datalen, direction,
2961 timeout, MAX_RETRIES, 1);
2962 if (!SRpnt)
2963 return (STp->buffer)->syscall_result;
2964
2965 ioctl_result = (STp->buffer)->syscall_result;
2966
2967 if (!ioctl_result) { /* SCSI command successful */
2968 st_release_request(SRpnt);
2969 SRpnt = NULL;
2970 STps->drv_block = blkno;
2971 STps->drv_file = fileno;
2972 STps->at_sm = at_sm;
2973
2974 if (cmd_in == MTBSFM)
2975 ioctl_result = st_int_ioctl(STp, MTFSF, 1);
2976 else if (cmd_in == MTFSFM)
2977 ioctl_result = st_int_ioctl(STp, MTBSF, 1);
2978
2979 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2980 STp->block_size = arg & MT_ST_BLKSIZE_MASK;
2981 if (STp->block_size != 0) {
2982 (STp->buffer)->buffer_blocks =
2983 (STp->buffer)->buffer_size / STp->block_size;
2984 }
2985 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
2986 if (cmd_in == SET_DENS_AND_BLK)
2987 STp->density = arg >> MT_ST_DENSITY_SHIFT;
2988 } else if (cmd_in == MTSETDRVBUFFER)
2989 STp->drv_buffer = (arg & 7);
2990 else if (cmd_in == MTSETDENSITY)
2991 STp->density = arg;
2992
2993 if (cmd_in == MTEOM)
2994 STps->eof = ST_EOD;
2995 else if (cmd_in == MTFSF)
2996 STps->eof = ST_FM;
2997 else if (chg_eof)
2998 STps->eof = ST_NOEOF;
2999
3000 if (cmd_in == MTWEOF || cmd_in == MTWEOFI)
3001 STps->rw = ST_IDLE; /* prevent automatic WEOF at close */
3002 } else { /* SCSI command was not completely successful. Don't return
3003 from this block without releasing the SCSI command block! */
3004 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
3005
3006 if (cmdstatp->flags & SENSE_EOM) {
3007 if (cmd_in != MTBSF && cmd_in != MTBSFM &&
3008 cmd_in != MTBSR && cmd_in != MTBSS)
3009 STps->eof = ST_EOM_OK;
3010 STps->drv_block = 0;
3011 }
3012
3013 if (cmdstatp->remainder_valid)
3014 undone = (int)cmdstatp->uremainder64;
3015 else
3016 undone = 0;
3017
3018 if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) &&
3019 cmdstatp->have_sense &&
3020 (cmdstatp->flags & SENSE_EOM)) {
3021 if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
3022 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) {
3023 ioctl_result = 0; /* EOF(s) written successfully at EOM */
3024 STps->eof = ST_NOEOF;
3025 } else { /* Writing EOF(s) failed */
3026 if (fileno >= 0)
3027 fileno -= undone;
3028 if (undone < arg)
3029 STps->eof = ST_NOEOF;
3030 }
3031 STps->drv_file = fileno;
3032 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) {
3033 if (fileno >= 0)
3034 STps->drv_file = fileno - undone;
3035 else
3036 STps->drv_file = fileno;
3037 STps->drv_block = -1;
3038 STps->eof = ST_NOEOF;
3039 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) {
3040 if (arg > 0 && undone < 0) /* Some drives get this wrong */
3041 undone = (-undone);
3042 if (STps->drv_file >= 0)
3043 STps->drv_file = fileno + undone;
3044 STps->drv_block = 0;
3045 STps->eof = ST_NOEOF;
3046 } else if (cmd_in == MTFSR) {
3047 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
3048 if (STps->drv_file >= 0)
3049 STps->drv_file++;
3050 STps->drv_block = 0;
3051 STps->eof = ST_FM;
3052 } else {
3053 if (blkno >= undone)
3054 STps->drv_block = blkno - undone;
3055 else
3056 STps->drv_block = (-1);
3057 STps->eof = ST_NOEOF;
3058 }
3059 } else if (cmd_in == MTBSR) {
3060 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
3061 STps->drv_file--;
3062 STps->drv_block = (-1);
3063 } else {
3064 if (arg > 0 && undone < 0) /* Some drives get this wrong */
3065 undone = (-undone);
3066 if (STps->drv_block >= 0)
3067 STps->drv_block = blkno + undone;
3068 }
3069 STps->eof = ST_NOEOF;
3070 } else if (cmd_in == MTEOM) {
3071 STps->drv_file = (-1);
3072 STps->drv_block = (-1);
3073 STps->eof = ST_EOD;
3074 } else if (cmd_in == MTSETBLK ||
3075 cmd_in == MTSETDENSITY ||
3076 cmd_in == MTSETDRVBUFFER ||
3077 cmd_in == SET_DENS_AND_BLK) {
3078 if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
3079 !(STp->use_pf & PF_TESTED)) {
3080 /* Try the other possible state of Page Format if not
3081 already tried */
3082 STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
3083 st_release_request(SRpnt);
3084 SRpnt = NULL;
3085 return st_int_ioctl(STp, cmd_in, arg);
3086 }
3087 } else if (chg_eof)
3088 STps->eof = ST_NOEOF;
3089
3090 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
3091 STps->eof = ST_EOD;
3092
3093 st_release_request(SRpnt);
3094 SRpnt = NULL;
3095 }
3096
3097 return ioctl_result;
3098}
3099
3100
3101/* Get the tape position. If bt == 2, arg points into a kernel space mt_loc
3102 structure. */
3103
3104static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition,
3105 int logical)
3106{
3107 int result;
3108 unsigned char scmd[MAX_COMMAND_SIZE];
3109 struct st_request *SRpnt;
3110
3111 if (STp->ready != ST_READY)
3112 return (-EIO);
3113
3114 memset(scmd, 0, MAX_COMMAND_SIZE);
3115 if ((STp->device)->scsi_level < SCSI_2) {
3116 scmd[0] = QFA_REQUEST_BLOCK;
3117 scmd[4] = 3;
3118 } else {
3119 scmd[0] = READ_POSITION;
3120 if (!logical && !STp->scsi2_logical)
3121 scmd[1] = 1;
3122 }
3123 SRpnt = st_do_scsi(NULL, STp, scmd, 20, DMA_FROM_DEVICE,
3124 STp->device->request_queue->rq_timeout,
3125 MAX_READY_RETRIES, 1);
3126 if (!SRpnt)
3127 return (STp->buffer)->syscall_result;
3128
3129 if ((STp->buffer)->syscall_result != 0 ||
3130 (STp->device->scsi_level >= SCSI_2 &&
3131 ((STp->buffer)->b_data[0] & 4) != 0)) {
3132 *block = *partition = 0;
3133 DEBC_printk(STp, " Can't read tape position.\n");
3134 result = (-EIO);
3135 } else {
3136 result = 0;
3137 if ((STp->device)->scsi_level < SCSI_2) {
3138 *block = ((STp->buffer)->b_data[0] << 16)
3139 + ((STp->buffer)->b_data[1] << 8)
3140 + (STp->buffer)->b_data[2];
3141 *partition = 0;
3142 } else {
3143 *block = ((STp->buffer)->b_data[4] << 24)
3144 + ((STp->buffer)->b_data[5] << 16)
3145 + ((STp->buffer)->b_data[6] << 8)
3146 + (STp->buffer)->b_data[7];
3147 *partition = (STp->buffer)->b_data[1];
3148 if (((STp->buffer)->b_data[0] & 0x80) &&
3149 (STp->buffer)->b_data[1] == 0) /* BOP of partition 0 */
3150 STp->ps[0].drv_block = STp->ps[0].drv_file = 0;
3151 }
3152 DEBC_printk(STp, "Got tape pos. blk %d part %d.\n",
3153 *block, *partition);
3154 }
3155 st_release_request(SRpnt);
3156 SRpnt = NULL;
3157
3158 return result;
3159}
3160
3161
3162/* Set the tape block and partition. Negative partition means that only the
3163 block should be set in vendor specific way. */
3164static int set_location(struct scsi_tape *STp, unsigned int block, int partition,
3165 int logical)
3166{
3167 struct st_partstat *STps;
3168 int result, p;
3169 unsigned int blk;
3170 int timeout;
3171 unsigned char scmd[MAX_COMMAND_SIZE];
3172 struct st_request *SRpnt;
3173
3174 if (STp->ready != ST_READY)
3175 return (-EIO);
3176 timeout = STp->long_timeout;
3177 STps = &(STp->ps[STp->partition]);
3178
3179 DEBC_printk(STp, "Setting block to %d and partition to %d.\n",
3180 block, partition);
3181 DEB(if (partition < 0)
3182 return (-EIO); )
3183
3184 /* Update the location at the partition we are leaving */
3185 if ((!STp->can_partitions && partition != 0) ||
3186 partition >= ST_NBR_PARTITIONS)
3187 return (-EINVAL);
3188 if (partition != STp->partition) {
3189 if (get_location(STp, &blk, &p, 1))
3190 STps->last_block_valid = 0;
3191 else {
3192 STps->last_block_valid = 1;
3193 STps->last_block_visited = blk;
3194 DEBC_printk(STp, "Visited block %d for "
3195 "partition %d saved.\n",
3196 blk, STp->partition);
3197 }
3198 }
3199
3200 memset(scmd, 0, MAX_COMMAND_SIZE);
3201 if ((STp->device)->scsi_level < SCSI_2) {
3202 scmd[0] = QFA_SEEK_BLOCK;
3203 scmd[2] = (block >> 16);
3204 scmd[3] = (block >> 8);
3205 scmd[4] = block;
3206 scmd[5] = 0;
3207 } else {
3208 scmd[0] = SEEK_10;
3209 scmd[3] = (block >> 24);
3210 scmd[4] = (block >> 16);
3211 scmd[5] = (block >> 8);
3212 scmd[6] = block;
3213 if (!logical && !STp->scsi2_logical)
3214 scmd[1] = 4;
3215 if (STp->partition != partition) {
3216 scmd[1] |= 2;
3217 scmd[8] = partition;
3218 DEBC_printk(STp, "Trying to change partition "
3219 "from %d to %d\n", STp->partition,
3220 partition);
3221 }
3222 }
3223 if (STp->immediate) {
3224 scmd[1] |= 1; /* Don't wait for completion */
3225 timeout = STp->device->request_queue->rq_timeout;
3226 }
3227
3228 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3229 timeout, MAX_READY_RETRIES, 1);
3230 if (!SRpnt)
3231 return (STp->buffer)->syscall_result;
3232
3233 STps->drv_block = STps->drv_file = (-1);
3234 STps->eof = ST_NOEOF;
3235 if ((STp->buffer)->syscall_result != 0) {
3236 result = (-EIO);
3237 if (STp->can_partitions &&
3238 (STp->device)->scsi_level >= SCSI_2 &&
3239 (p = find_partition(STp)) >= 0)
3240 STp->partition = p;
3241 } else {
3242 if (STp->can_partitions) {
3243 STp->partition = partition;
3244 STps = &(STp->ps[partition]);
3245 if (!STps->last_block_valid ||
3246 STps->last_block_visited != block) {
3247 STps->at_sm = 0;
3248 STps->rw = ST_IDLE;
3249 }
3250 } else
3251 STps->at_sm = 0;
3252 if (block == 0)
3253 STps->drv_block = STps->drv_file = 0;
3254 result = 0;
3255 }
3256
3257 st_release_request(SRpnt);
3258 SRpnt = NULL;
3259
3260 return result;
3261}
3262
3263
3264/* Find the current partition number for the drive status. Called from open and
3265 returns either partition number of negative error code. */
3266static int find_partition(struct scsi_tape *STp)
3267{
3268 int i, partition;
3269 unsigned int block;
3270
3271 if ((i = get_location(STp, &block, &partition, 1)) < 0)
3272 return i;
3273 if (partition >= ST_NBR_PARTITIONS)
3274 return (-EIO);
3275 return partition;
3276}
3277
3278
3279/* Change the partition if necessary */
3280static int switch_partition(struct scsi_tape *STp)
3281{
3282 struct st_partstat *STps;
3283
3284 if (STp->partition == STp->new_partition)
3285 return 0;
3286 STps = &(STp->ps[STp->new_partition]);
3287 if (!STps->last_block_valid)
3288 STps->last_block_visited = 0;
3289 return set_location(STp, STps->last_block_visited, STp->new_partition, 1);
3290}
3291
3292/* Functions for reading and writing the medium partition mode page. */
3293
3294#define PART_PAGE 0x11
3295#define PART_PAGE_FIXED_LENGTH 8
3296
3297#define PP_OFF_MAX_ADD_PARTS 2
3298#define PP_OFF_NBR_ADD_PARTS 3
3299#define PP_OFF_FLAGS 4
3300#define PP_OFF_PART_UNITS 6
3301#define PP_OFF_RESERVED 7
3302
3303#define PP_BIT_IDP 0x20
3304#define PP_BIT_FDP 0x80
3305#define PP_MSK_PSUM_MB 0x10
3306#define PP_MSK_PSUM_UNITS 0x18
3307#define PP_MSK_POFM 0x04
3308
3309/* Get the number of partitions on the tape. As a side effect reads the
3310 mode page into the tape buffer. */
3311static int nbr_partitions(struct scsi_tape *STp)
3312{
3313 int result;
3314
3315 if (STp->ready != ST_READY)
3316 return (-EIO);
3317
3318 result = read_mode_page(STp, PART_PAGE, 1);
3319
3320 if (result) {
3321 DEBC_printk(STp, "Can't read medium partition page.\n");
3322 result = (-EIO);
3323 } else {
3324 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH +
3325 PP_OFF_NBR_ADD_PARTS] + 1;
3326 DEBC_printk(STp, "Number of partitions %d.\n", result);
3327 }
3328
3329 return result;
3330}
3331
3332
3333static int format_medium(struct scsi_tape *STp, int format)
3334{
3335 int result = 0;
3336 int timeout = STp->long_timeout;
3337 unsigned char scmd[MAX_COMMAND_SIZE];
3338 struct st_request *SRpnt;
3339
3340 memset(scmd, 0, MAX_COMMAND_SIZE);
3341 scmd[0] = FORMAT_UNIT;
3342 scmd[2] = format;
3343 if (STp->immediate) {
3344 scmd[1] |= 1; /* Don't wait for completion */
3345 timeout = STp->device->request_queue->rq_timeout;
3346 }
3347 DEBC_printk(STp, "Sending FORMAT MEDIUM\n");
3348 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3349 timeout, MAX_RETRIES, 1);
3350 if (!SRpnt)
3351 result = STp->buffer->syscall_result;
3352 return result;
3353}
3354
3355
3356/* Partition the tape into two partitions if size > 0 or one partition if
3357 size == 0.
3358
3359 The block descriptors are read and written because Sony SDT-7000 does not
3360 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
3361
3362 My HP C1533A drive returns only one partition size field. This is used to
3363 set the size of partition 1. There is no size field for the default partition.
3364 Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is
3365 used to set the size of partition 1 (this is what the SCSI-3 standard specifies).
3366 The following algorithm is used to accommodate both drives: if the number of
3367 partition size fields is greater than the maximum number of additional partitions
3368 in the mode page, the second field is used. Otherwise the first field is used.
3369
3370 For Seagate DDS drives the page length must be 8 when no partitions is defined
3371 and 10 when 1 partition is defined (information from Eric Lee Green). This is
3372 is acceptable also to some other old drives and enforced if the first partition
3373 size field is used for the first additional partition size.
3374
3375 For drives that advertize SCSI-3 or newer, use the SSC-3 methods.
3376 */
3377static int partition_tape(struct scsi_tape *STp, int size)
3378{
3379 int result;
3380 int target_partition;
3381 bool scsi3 = STp->device->scsi_level >= SCSI_3, needs_format = false;
3382 int pgo, psd_cnt, psdo;
3383 int psum = PP_MSK_PSUM_MB, units = 0;
3384 unsigned char *bp;
3385
3386 result = read_mode_page(STp, PART_PAGE, 0);
3387 if (result) {
3388 DEBC_printk(STp, "Can't read partition mode page.\n");
3389 return result;
3390 }
3391 target_partition = 1;
3392 if (size < 0) {
3393 target_partition = 0;
3394 size = -size;
3395 }
3396
3397 /* The mode page is in the buffer. Let's modify it and write it. */
3398 bp = (STp->buffer)->b_data;
3399 pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH];
3400 DEBC_printk(STp, "Partition page length is %d bytes.\n",
3401 bp[pgo + MP_OFF_PAGE_LENGTH] + 2);
3402
3403 psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2;
3404
3405 if (scsi3) {
3406 needs_format = (bp[pgo + PP_OFF_FLAGS] & PP_MSK_POFM) != 0;
3407 if (needs_format && size == 0) {
3408 /* No need to write the mode page when clearing
3409 * partitioning
3410 */
3411 DEBC_printk(STp, "Formatting tape with one partition.\n");
3412 result = format_medium(STp, 0);
3413 goto out;
3414 }
3415 if (needs_format) /* Leave the old value for HP DATs claiming SCSI_3 */
3416 psd_cnt = 2;
3417 if ((bp[pgo + PP_OFF_FLAGS] & PP_MSK_PSUM_UNITS) == PP_MSK_PSUM_UNITS) {
3418 /* Use units scaling for large partitions if the device
3419 * suggests it and no precision lost. Required for IBM
3420 * TS1140/50 drives that don't support MB units.
3421 */
3422 if (size >= 1000 && (size % 1000) == 0) {
3423 size /= 1000;
3424 psum = PP_MSK_PSUM_UNITS;
3425 units = 9; /* GB */
3426 }
3427 }
3428 /* Try it anyway if too large to specify in MB */
3429 if (psum == PP_MSK_PSUM_MB && size >= 65534) {
3430 size /= 1000;
3431 psum = PP_MSK_PSUM_UNITS;
3432 units = 9; /* GB */
3433 }
3434 }
3435
3436 if (size >= 65535 || /* Does not fit into two bytes */
3437 (target_partition == 0 && psd_cnt < 2)) {
3438 result = -EINVAL;
3439 goto out;
3440 }
3441
3442 psdo = pgo + PART_PAGE_FIXED_LENGTH;
3443 /* The second condition is for HP DDS which use only one partition size
3444 * descriptor
3445 */
3446 if (target_partition > 0 &&
3447 (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS] ||
3448 bp[pgo + PP_OFF_MAX_ADD_PARTS] != 1)) {
3449 bp[psdo] = bp[psdo + 1] = 0xff; /* Rest to partition 0 */
3450 psdo += 2;
3451 }
3452 memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2);
3453
3454 DEBC_printk(STp, "psd_cnt %d, max.parts %d, nbr_parts %d\n",
3455 psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS],
3456 bp[pgo + PP_OFF_NBR_ADD_PARTS]);
3457
3458 if (size == 0) {
3459 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0;
3460 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS])
3461 bp[pgo + MP_OFF_PAGE_LENGTH] = 6;
3462 DEBC_printk(STp, "Formatting tape with one partition.\n");
3463 } else {
3464 bp[psdo] = (size >> 8) & 0xff;
3465 bp[psdo + 1] = size & 0xff;
3466 if (target_partition == 0)
3467 bp[psdo + 2] = bp[psdo + 3] = 0xff;
3468 bp[pgo + 3] = 1;
3469 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8)
3470 bp[pgo + MP_OFF_PAGE_LENGTH] = 8;
3471 DEBC_printk(STp,
3472 "Formatting tape with two partitions (%i = %d MB).\n",
3473 target_partition, units > 0 ? size * 1000 : size);
3474 }
3475 bp[pgo + PP_OFF_PART_UNITS] = 0;
3476 bp[pgo + PP_OFF_RESERVED] = 0;
3477 if (size != 1 || units != 0) {
3478 bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | psum |
3479 (bp[pgo + PP_OFF_FLAGS] & 0x07);
3480 bp[pgo + PP_OFF_PART_UNITS] = units;
3481 } else
3482 bp[pgo + PP_OFF_FLAGS] = PP_BIT_FDP |
3483 (bp[pgo + PP_OFF_FLAGS] & 0x1f);
3484 bp[pgo + MP_OFF_PAGE_LENGTH] = 6 + psd_cnt * 2;
3485
3486 result = write_mode_page(STp, PART_PAGE, 1);
3487
3488 if (!result && needs_format)
3489 result = format_medium(STp, 1);
3490
3491 if (result) {
3492 st_printk(KERN_INFO, STp, "Partitioning of tape failed.\n");
3493 result = (-EIO);
3494 }
3495
3496out:
3497 return result;
3498}
3499
3500
3501
3502/* The ioctl command */
3503static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3504{
3505 void __user *p = (void __user *)arg;
3506 int i, cmd_nr, cmd_type, bt;
3507 int retval = 0;
3508 unsigned int blk;
3509 struct scsi_tape *STp = file->private_data;
3510 struct st_modedef *STm;
3511 struct st_partstat *STps;
3512
3513 if (mutex_lock_interruptible(&STp->lock))
3514 return -ERESTARTSYS;
3515
3516 DEB(
3517 if (debugging && !STp->in_use) {
3518 st_printk(ST_DEB_MSG, STp, "Incorrect device.\n");
3519 retval = (-EIO);
3520 goto out;
3521 } ) /* end DEB */
3522
3523 STm = &(STp->modes[STp->current_mode]);
3524 STps = &(STp->ps[STp->partition]);
3525
3526 /*
3527 * If we are in the middle of error recovery, don't let anyone
3528 * else try and use this device. Also, if error recovery fails, it
3529 * may try and take the device offline, in which case all further
3530 * access to the device is prohibited.
3531 */
3532 retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in,
3533 file->f_flags & O_NDELAY);
3534 if (retval)
3535 goto out;
3536
3537 cmd_type = _IOC_TYPE(cmd_in);
3538 cmd_nr = _IOC_NR(cmd_in);
3539
3540 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
3541 struct mtop mtc;
3542
3543 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
3544 retval = (-EINVAL);
3545 goto out;
3546 }
3547
3548 i = copy_from_user(&mtc, p, sizeof(struct mtop));
3549 if (i) {
3550 retval = (-EFAULT);
3551 goto out;
3552 }
3553
3554 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
3555 st_printk(KERN_WARNING, STp,
3556 "MTSETDRVBUFFER only allowed for root.\n");
3557 retval = (-EPERM);
3558 goto out;
3559 }
3560 if (!STm->defined &&
3561 (mtc.mt_op != MTSETDRVBUFFER &&
3562 (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
3563 retval = (-ENXIO);
3564 goto out;
3565 }
3566
3567 if (!STp->pos_unknown) {
3568
3569 if (STps->eof == ST_FM_HIT) {
3570 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3571 mtc.mt_op == MTEOM) {
3572 mtc.mt_count -= 1;
3573 if (STps->drv_file >= 0)
3574 STps->drv_file += 1;
3575 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
3576 mtc.mt_count += 1;
3577 if (STps->drv_file >= 0)
3578 STps->drv_file += 1;
3579 }
3580 }
3581
3582 if (mtc.mt_op == MTSEEK) {
3583 /* Old position must be restored if partition will be
3584 changed */
3585 i = !STp->can_partitions ||
3586 (STp->new_partition != STp->partition);
3587 } else {
3588 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3589 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
3590 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
3591 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3592 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
3593 mtc.mt_op == MTCOMPRESSION;
3594 }
3595 i = flush_buffer(STp, i);
3596 if (i < 0) {
3597 retval = i;
3598 goto out;
3599 }
3600 if (STps->rw == ST_WRITING &&
3601 (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3602 mtc.mt_op == MTSEEK ||
3603 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) {
3604 i = st_int_ioctl(STp, MTWEOF, 1);
3605 if (i < 0) {
3606 retval = i;
3607 goto out;
3608 }
3609 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)
3610 mtc.mt_count++;
3611 STps->rw = ST_IDLE;
3612 }
3613
3614 } else {
3615 /*
3616 * If there was a bus reset, block further access
3617 * to this device. If the user wants to rewind the tape,
3618 * then reset the flag and allow access again.
3619 */
3620 if (mtc.mt_op != MTREW &&
3621 mtc.mt_op != MTOFFL &&
3622 mtc.mt_op != MTRETEN &&
3623 mtc.mt_op != MTERASE &&
3624 mtc.mt_op != MTSEEK &&
3625 mtc.mt_op != MTEOM) {
3626 retval = (-EIO);
3627 goto out;
3628 }
3629 reset_state(STp);
3630 /* remove this when the midlevel properly clears was_reset */
3631 STp->device->was_reset = 0;
3632 }
3633
3634 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
3635 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM &&
3636 mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART)
3637 STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */
3638
3639 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
3640 do_door_lock(STp, 0); /* Ignore result! */
3641
3642 if (mtc.mt_op == MTSETDRVBUFFER &&
3643 (mtc.mt_count & MT_ST_OPTIONS) != 0) {
3644 retval = st_set_options(STp, mtc.mt_count);
3645 goto out;
3646 }
3647
3648 if (mtc.mt_op == MTSETPART) {
3649 if (!STp->can_partitions ||
3650 mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) {
3651 retval = (-EINVAL);
3652 goto out;
3653 }
3654 if (mtc.mt_count >= STp->nbr_partitions &&
3655 (STp->nbr_partitions = nbr_partitions(STp)) < 0) {
3656 retval = (-EIO);
3657 goto out;
3658 }
3659 if (mtc.mt_count >= STp->nbr_partitions) {
3660 retval = (-EINVAL);
3661 goto out;
3662 }
3663 STp->new_partition = mtc.mt_count;
3664 retval = 0;
3665 goto out;
3666 }
3667
3668 if (mtc.mt_op == MTMKPART) {
3669 if (!STp->can_partitions) {
3670 retval = (-EINVAL);
3671 goto out;
3672 }
3673 i = do_load_unload(STp, file, 1);
3674 if (i < 0) {
3675 retval = i;
3676 goto out;
3677 }
3678 i = partition_tape(STp, mtc.mt_count);
3679 if (i < 0) {
3680 retval = i;
3681 goto out;
3682 }
3683 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3684 STp->ps[i].rw = ST_IDLE;
3685 STp->ps[i].at_sm = 0;
3686 STp->ps[i].last_block_valid = 0;
3687 }
3688 STp->partition = STp->new_partition = 0;
3689 STp->nbr_partitions = mtc.mt_count != 0 ? 2 : 1;
3690 STps->drv_block = STps->drv_file = 0;
3691 retval = 0;
3692 goto out;
3693 }
3694
3695 if (mtc.mt_op == MTSEEK) {
3696 i = set_location(STp, mtc.mt_count, STp->new_partition, 0);
3697 if (!STp->can_partitions)
3698 STp->ps[0].rw = ST_IDLE;
3699 retval = i;
3700 goto out;
3701 }
3702
3703 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) {
3704 retval = do_load_unload(STp, file, 0);
3705 goto out;
3706 }
3707
3708 if (mtc.mt_op == MTLOAD) {
3709 retval = do_load_unload(STp, file, max(1, mtc.mt_count));
3710 goto out;
3711 }
3712
3713 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
3714 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
3715 goto out;
3716 }
3717
3718 if (STp->can_partitions && STp->ready == ST_READY &&
3719 (i = switch_partition(STp)) < 0) {
3720 retval = i;
3721 goto out;
3722 }
3723
3724 if (mtc.mt_op == MTCOMPRESSION)
3725 retval = st_compression(STp, (mtc.mt_count & 1));
3726 else
3727 retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count);
3728 goto out;
3729 }
3730 if (!STm->defined) {
3731 retval = (-ENXIO);
3732 goto out;
3733 }
3734
3735 if ((i = flush_buffer(STp, 0)) < 0) {
3736 retval = i;
3737 goto out;
3738 }
3739 if (STp->can_partitions &&
3740 (i = switch_partition(STp)) < 0) {
3741 retval = i;
3742 goto out;
3743 }
3744
3745 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
3746 struct mtget mt_status;
3747
3748 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
3749 retval = (-EINVAL);
3750 goto out;
3751 }
3752
3753 mt_status.mt_type = STp->tape_type;
3754 mt_status.mt_dsreg =
3755 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
3756 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
3757 mt_status.mt_blkno = STps->drv_block;
3758 mt_status.mt_fileno = STps->drv_file;
3759 if (STp->block_size != 0) {
3760 if (STps->rw == ST_WRITING)
3761 mt_status.mt_blkno +=
3762 (STp->buffer)->buffer_bytes / STp->block_size;
3763 else if (STps->rw == ST_READING)
3764 mt_status.mt_blkno -=
3765 ((STp->buffer)->buffer_bytes +
3766 STp->block_size - 1) / STp->block_size;
3767 }
3768
3769 mt_status.mt_gstat = 0;
3770 if (STp->drv_write_prot)
3771 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
3772 if (mt_status.mt_blkno == 0) {
3773 if (mt_status.mt_fileno == 0)
3774 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
3775 else
3776 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
3777 }
3778 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT);
3779 mt_status.mt_resid = STp->partition;
3780 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
3781 mt_status.mt_gstat |= GMT_EOT(0xffffffff);
3782 else if (STps->eof >= ST_EOM_OK)
3783 mt_status.mt_gstat |= GMT_EOD(0xffffffff);
3784 if (STp->density == 1)
3785 mt_status.mt_gstat |= GMT_D_800(0xffffffff);
3786 else if (STp->density == 2)
3787 mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
3788 else if (STp->density == 3)
3789 mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
3790 if (STp->ready == ST_READY)
3791 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
3792 if (STp->ready == ST_NO_TAPE)
3793 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
3794 if (STps->at_sm)
3795 mt_status.mt_gstat |= GMT_SM(0xffffffff);
3796 if (STm->do_async_writes ||
3797 (STm->do_buffer_writes && STp->block_size != 0) ||
3798 STp->drv_buffer != 0)
3799 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
3800 if (STp->cleaning_req)
3801 mt_status.mt_gstat |= GMT_CLN(0xffffffff);
3802
3803 retval = put_user_mtget(p, &mt_status);
3804 if (retval)
3805 goto out;
3806
3807 STp->recover_reg = 0; /* Clear after read */
3808 goto out;
3809 } /* End of MTIOCGET */
3810 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
3811 struct mtpos mt_pos;
3812 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
3813 retval = (-EINVAL);
3814 goto out;
3815 }
3816 if ((i = get_location(STp, &blk, &bt, 0)) < 0) {
3817 retval = i;
3818 goto out;
3819 }
3820 mt_pos.mt_blkno = blk;
3821 retval = put_user_mtpos(p, &mt_pos);
3822 goto out;
3823 }
3824 mutex_unlock(&STp->lock);
3825
3826 switch (cmd_in) {
3827 case SG_IO:
3828 case SCSI_IOCTL_SEND_COMMAND:
3829 case CDROM_SEND_PACKET:
3830 if (!capable(CAP_SYS_RAWIO))
3831 return -EPERM;
3832 break;
3833 default:
3834 break;
3835 }
3836
3837 retval = scsi_ioctl(STp->device, file->f_mode & FMODE_WRITE, cmd_in, p);
3838 if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) {
3839 /* unload */
3840 STp->rew_at_close = 0;
3841 STp->ready = ST_NO_TAPE;
3842 }
3843 return retval;
3844
3845 out:
3846 mutex_unlock(&STp->lock);
3847 return retval;
3848}
3849
3850#ifdef CONFIG_COMPAT
3851static long st_compat_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3852{
3853 /* argument conversion is handled using put_user_mtpos/put_user_mtget */
3854 switch (cmd_in) {
3855 case MTIOCPOS32:
3856 cmd_in = MTIOCPOS;
3857 break;
3858 case MTIOCGET32:
3859 cmd_in = MTIOCGET;
3860 break;
3861 }
3862
3863 return st_ioctl(file, cmd_in, arg);
3864}
3865#endif
3866
3867
3868
3869/* Try to allocate a new tape buffer. Calling function must not hold
3870 dev_arr_lock. */
3871static struct st_buffer *new_tape_buffer(int max_sg)
3872{
3873 struct st_buffer *tb;
3874
3875 tb = kzalloc(sizeof(struct st_buffer), GFP_KERNEL);
3876 if (!tb) {
3877 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
3878 return NULL;
3879 }
3880 tb->frp_segs = 0;
3881 tb->use_sg = max_sg;
3882 tb->buffer_size = 0;
3883
3884 tb->reserved_pages = kcalloc(max_sg, sizeof(struct page *),
3885 GFP_KERNEL);
3886 if (!tb->reserved_pages) {
3887 kfree(tb);
3888 return NULL;
3889 }
3890
3891 return tb;
3892}
3893
3894
3895/* Try to allocate enough space in the tape buffer */
3896#define ST_MAX_ORDER 6
3897
3898static int enlarge_buffer(struct st_buffer * STbuffer, int new_size)
3899{
3900 int segs, max_segs, b_size, order, got;
3901 gfp_t priority;
3902
3903 if (new_size <= STbuffer->buffer_size)
3904 return 1;
3905
3906 if (STbuffer->buffer_size <= PAGE_SIZE)
3907 normalize_buffer(STbuffer); /* Avoid extra segment */
3908
3909 max_segs = STbuffer->use_sg;
3910
3911 priority = GFP_KERNEL | __GFP_NOWARN;
3912
3913 if (STbuffer->cleared)
3914 priority |= __GFP_ZERO;
3915
3916 if (STbuffer->frp_segs) {
3917 order = STbuffer->reserved_page_order;
3918 b_size = PAGE_SIZE << order;
3919 } else {
3920 for (b_size = PAGE_SIZE, order = 0;
3921 order < ST_MAX_ORDER &&
3922 max_segs * (PAGE_SIZE << order) < new_size;
3923 order++, b_size *= 2)
3924 ; /* empty */
3925 STbuffer->reserved_page_order = order;
3926 }
3927 if (max_segs * (PAGE_SIZE << order) < new_size) {
3928 if (order == ST_MAX_ORDER)
3929 return 0;
3930 normalize_buffer(STbuffer);
3931 return enlarge_buffer(STbuffer, new_size);
3932 }
3933
3934 for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size;
3935 segs < max_segs && got < new_size;) {
3936 struct page *page;
3937
3938 page = alloc_pages(priority, order);
3939 if (!page) {
3940 DEB(STbuffer->buffer_size = got);
3941 normalize_buffer(STbuffer);
3942 return 0;
3943 }
3944
3945 STbuffer->frp_segs += 1;
3946 got += b_size;
3947 STbuffer->buffer_size = got;
3948 STbuffer->reserved_pages[segs] = page;
3949 segs++;
3950 }
3951 STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
3952
3953 return 1;
3954}
3955
3956
3957/* Make sure that no data from previous user is in the internal buffer */
3958static void clear_buffer(struct st_buffer * st_bp)
3959{
3960 int i;
3961
3962 for (i=0; i < st_bp->frp_segs; i++)
3963 memset(page_address(st_bp->reserved_pages[i]), 0,
3964 PAGE_SIZE << st_bp->reserved_page_order);
3965 st_bp->cleared = 1;
3966}
3967
3968
3969/* Release the extra buffer */
3970static void normalize_buffer(struct st_buffer * STbuffer)
3971{
3972 int i, order = STbuffer->reserved_page_order;
3973
3974 for (i = 0; i < STbuffer->frp_segs; i++) {
3975 __free_pages(STbuffer->reserved_pages[i], order);
3976 STbuffer->buffer_size -= (PAGE_SIZE << order);
3977 }
3978 STbuffer->frp_segs = 0;
3979 STbuffer->sg_segs = 0;
3980 STbuffer->reserved_page_order = 0;
3981 STbuffer->map_data.offset = 0;
3982}
3983
3984
3985/* Move data from the user buffer to the tape buffer. Returns zero (success) or
3986 negative error code. */
3987static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
3988{
3989 int i, cnt, res, offset;
3990 int length = PAGE_SIZE << st_bp->reserved_page_order;
3991
3992 for (i = 0, offset = st_bp->buffer_bytes;
3993 i < st_bp->frp_segs && offset >= length; i++)
3994 offset -= length;
3995 if (i == st_bp->frp_segs) { /* Should never happen */
3996 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
3997 return (-EIO);
3998 }
3999 for (; i < st_bp->frp_segs && do_count > 0; i++) {
4000 struct page *page = st_bp->reserved_pages[i];
4001 cnt = length - offset < do_count ? length - offset : do_count;
4002 res = copy_from_user(page_address(page) + offset, ubp, cnt);
4003 if (res)
4004 return (-EFAULT);
4005 do_count -= cnt;
4006 st_bp->buffer_bytes += cnt;
4007 ubp += cnt;
4008 offset = 0;
4009 }
4010 if (do_count) /* Should never happen */
4011 return (-EIO);
4012
4013 return 0;
4014}
4015
4016
4017/* Move data from the tape buffer to the user buffer. Returns zero (success) or
4018 negative error code. */
4019static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
4020{
4021 int i, cnt, res, offset;
4022 int length = PAGE_SIZE << st_bp->reserved_page_order;
4023
4024 for (i = 0, offset = st_bp->read_pointer;
4025 i < st_bp->frp_segs && offset >= length; i++)
4026 offset -= length;
4027 if (i == st_bp->frp_segs) { /* Should never happen */
4028 printk(KERN_WARNING "st: from_buffer offset overflow.\n");
4029 return (-EIO);
4030 }
4031 for (; i < st_bp->frp_segs && do_count > 0; i++) {
4032 struct page *page = st_bp->reserved_pages[i];
4033 cnt = length - offset < do_count ? length - offset : do_count;
4034 res = copy_to_user(ubp, page_address(page) + offset, cnt);
4035 if (res)
4036 return (-EFAULT);
4037 do_count -= cnt;
4038 st_bp->buffer_bytes -= cnt;
4039 st_bp->read_pointer += cnt;
4040 ubp += cnt;
4041 offset = 0;
4042 }
4043 if (do_count) /* Should never happen */
4044 return (-EIO);
4045
4046 return 0;
4047}
4048
4049
4050/* Move data towards start of buffer */
4051static void move_buffer_data(struct st_buffer * st_bp, int offset)
4052{
4053 int src_seg, dst_seg, src_offset = 0, dst_offset;
4054 int count, total;
4055 int length = PAGE_SIZE << st_bp->reserved_page_order;
4056
4057 if (offset == 0)
4058 return;
4059
4060 total=st_bp->buffer_bytes - offset;
4061 for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) {
4062 src_offset = offset;
4063 if (src_offset < length)
4064 break;
4065 offset -= length;
4066 }
4067
4068 st_bp->buffer_bytes = st_bp->read_pointer = total;
4069 for (dst_seg=dst_offset=0; total > 0; ) {
4070 struct page *dpage = st_bp->reserved_pages[dst_seg];
4071 struct page *spage = st_bp->reserved_pages[src_seg];
4072
4073 count = min(length - dst_offset, length - src_offset);
4074 memmove(page_address(dpage) + dst_offset,
4075 page_address(spage) + src_offset, count);
4076 src_offset += count;
4077 if (src_offset >= length) {
4078 src_seg++;
4079 src_offset = 0;
4080 }
4081 dst_offset += count;
4082 if (dst_offset >= length) {
4083 dst_seg++;
4084 dst_offset = 0;
4085 }
4086 total -= count;
4087 }
4088}
4089
4090/* Validate the options from command line or module parameters */
4091static void validate_options(void)
4092{
4093 if (buffer_kbs > 0)
4094 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE;
4095 if (max_sg_segs >= ST_FIRST_SG)
4096 st_max_sg_segs = max_sg_segs;
4097}
4098
4099#ifndef MODULE
4100/* Set the boot options. Syntax is defined in Documenation/scsi/st.txt.
4101 */
4102static int __init st_setup(char *str)
4103{
4104 int i, len, ints[5];
4105 char *stp;
4106
4107 stp = get_options(str, ARRAY_SIZE(ints), ints);
4108
4109 if (ints[0] > 0) {
4110 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
4111 if (parms[i].val)
4112 *parms[i].val = ints[i + 1];
4113 } else {
4114 while (stp != NULL) {
4115 for (i = 0; i < ARRAY_SIZE(parms); i++) {
4116 len = strlen(parms[i].name);
4117 if (!strncmp(stp, parms[i].name, len) &&
4118 (*(stp + len) == ':' || *(stp + len) == '=')) {
4119 if (parms[i].val)
4120 *parms[i].val =
4121 simple_strtoul(stp + len + 1, NULL, 0);
4122 else
4123 printk(KERN_WARNING "st: Obsolete parameter %s\n",
4124 parms[i].name);
4125 break;
4126 }
4127 }
4128 if (i >= ARRAY_SIZE(parms))
4129 printk(KERN_WARNING "st: invalid parameter in '%s'\n",
4130 stp);
4131 stp = strchr(stp, ',');
4132 if (stp)
4133 stp++;
4134 }
4135 }
4136
4137 validate_options();
4138
4139 return 1;
4140}
4141
4142__setup("st=", st_setup);
4143
4144#endif
4145
4146static const struct file_operations st_fops =
4147{
4148 .owner = THIS_MODULE,
4149 .read = st_read,
4150 .write = st_write,
4151 .unlocked_ioctl = st_ioctl,
4152#ifdef CONFIG_COMPAT
4153 .compat_ioctl = st_compat_ioctl,
4154#endif
4155 .open = st_open,
4156 .flush = st_flush,
4157 .release = st_release,
4158 .llseek = noop_llseek,
4159};
4160
4161static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
4162{
4163 int i, error;
4164 dev_t cdev_devno;
4165 struct cdev *cdev;
4166 struct device *dev;
4167 struct st_modedef *STm = &(tape->modes[mode]);
4168 char name[10];
4169 int dev_num = tape->index;
4170
4171 cdev_devno = MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, rew));
4172
4173 cdev = cdev_alloc();
4174 if (!cdev) {
4175 pr_err("st%d: out of memory. Device not attached.\n", dev_num);
4176 error = -ENOMEM;
4177 goto out;
4178 }
4179 cdev->owner = THIS_MODULE;
4180 cdev->ops = &st_fops;
4181 STm->cdevs[rew] = cdev;
4182
4183 error = cdev_add(cdev, cdev_devno, 1);
4184 if (error) {
4185 pr_err("st%d: Can't add %s-rewind mode %d\n", dev_num,
4186 rew ? "non" : "auto", mode);
4187 pr_err("st%d: Device not attached.\n", dev_num);
4188 goto out_free;
4189 }
4190
4191 i = mode << (4 - ST_NBR_MODE_BITS);
4192 snprintf(name, 10, "%s%s%s", rew ? "n" : "",
4193 tape->name, st_formats[i]);
4194
4195 dev = device_create(&st_sysfs_class, &tape->device->sdev_gendev,
4196 cdev_devno, &tape->modes[mode], "%s", name);
4197 if (IS_ERR(dev)) {
4198 pr_err("st%d: device_create failed\n", dev_num);
4199 error = PTR_ERR(dev);
4200 goto out_free;
4201 }
4202
4203 STm->devs[rew] = dev;
4204
4205 return 0;
4206out_free:
4207 cdev_del(STm->cdevs[rew]);
4208out:
4209 STm->cdevs[rew] = NULL;
4210 STm->devs[rew] = NULL;
4211 return error;
4212}
4213
4214static int create_cdevs(struct scsi_tape *tape)
4215{
4216 int mode, error;
4217 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4218 error = create_one_cdev(tape, mode, 0);
4219 if (error)
4220 return error;
4221 error = create_one_cdev(tape, mode, 1);
4222 if (error)
4223 return error;
4224 }
4225
4226 return sysfs_create_link(&tape->device->sdev_gendev.kobj,
4227 &tape->modes[0].devs[0]->kobj, "tape");
4228}
4229
4230static void remove_cdevs(struct scsi_tape *tape)
4231{
4232 int mode, rew;
4233 sysfs_remove_link(&tape->device->sdev_gendev.kobj, "tape");
4234 for (mode = 0; mode < ST_NBR_MODES; mode++) {
4235 struct st_modedef *STm = &(tape->modes[mode]);
4236 for (rew = 0; rew < 2; rew++) {
4237 if (STm->cdevs[rew])
4238 cdev_del(STm->cdevs[rew]);
4239 if (STm->devs[rew])
4240 device_unregister(STm->devs[rew]);
4241 }
4242 }
4243}
4244
4245static int st_probe(struct device *dev)
4246{
4247 struct scsi_device *SDp = to_scsi_device(dev);
4248 struct scsi_tape *tpnt = NULL;
4249 struct st_modedef *STm;
4250 struct st_partstat *STps;
4251 struct st_buffer *buffer;
4252 int i, error;
4253
4254 if (SDp->type != TYPE_TAPE)
4255 return -ENODEV;
4256 if (st_incompatible(SDp)) {
4257 sdev_printk(KERN_INFO, SDp,
4258 "OnStream tapes are no longer supported;\n");
4259 sdev_printk(KERN_INFO, SDp,
4260 "please mail to linux-scsi@vger.kernel.org.\n");
4261 return -ENODEV;
4262 }
4263
4264 scsi_autopm_get_device(SDp);
4265 i = queue_max_segments(SDp->request_queue);
4266 if (st_max_sg_segs < i)
4267 i = st_max_sg_segs;
4268 buffer = new_tape_buffer(i);
4269 if (buffer == NULL) {
4270 sdev_printk(KERN_ERR, SDp,
4271 "st: Can't allocate new tape buffer. "
4272 "Device not attached.\n");
4273 goto out;
4274 }
4275
4276 tpnt = kzalloc(sizeof(struct scsi_tape), GFP_KERNEL);
4277 if (tpnt == NULL) {
4278 sdev_printk(KERN_ERR, SDp,
4279 "st: Can't allocate device descriptor.\n");
4280 goto out_buffer_free;
4281 }
4282 kref_init(&tpnt->kref);
4283
4284 tpnt->device = SDp;
4285 if (SDp->scsi_level <= 2)
4286 tpnt->tape_type = MT_ISSCSI1;
4287 else
4288 tpnt->tape_type = MT_ISSCSI2;
4289
4290 tpnt->buffer = buffer;
4291 tpnt->buffer->last_SRpnt = NULL;
4292
4293 tpnt->inited = 0;
4294 tpnt->dirty = 0;
4295 tpnt->in_use = 0;
4296 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
4297 tpnt->use_pf = (SDp->scsi_level >= SCSI_2);
4298 tpnt->density = 0;
4299 tpnt->do_auto_lock = ST_AUTO_LOCK;
4300 tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */
4301 tpnt->can_partitions = 0;
4302 tpnt->two_fm = ST_TWO_FM;
4303 tpnt->fast_mteom = ST_FAST_MTEOM;
4304 tpnt->scsi2_logical = ST_SCSI2LOGICAL;
4305 tpnt->sili = ST_SILI;
4306 tpnt->immediate = ST_NOWAIT;
4307 tpnt->immediate_filemark = 0;
4308 tpnt->default_drvbuffer = 0xff; /* No forced buffering */
4309 tpnt->partition = 0;
4310 tpnt->new_partition = 0;
4311 tpnt->nbr_partitions = 0;
4312 blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT);
4313 tpnt->long_timeout = ST_LONG_TIMEOUT;
4314 tpnt->try_dio = try_direct_io;
4315
4316 for (i = 0; i < ST_NBR_MODES; i++) {
4317 STm = &(tpnt->modes[i]);
4318 STm->defined = 0;
4319 STm->sysv = ST_SYSV;
4320 STm->defaults_for_writes = 0;
4321 STm->do_async_writes = ST_ASYNC_WRITES;
4322 STm->do_buffer_writes = ST_BUFFER_WRITES;
4323 STm->do_read_ahead = ST_READ_AHEAD;
4324 STm->default_compression = ST_DONT_TOUCH;
4325 STm->default_blksize = (-1); /* No forced size */
4326 STm->default_density = (-1); /* No forced density */
4327 STm->tape = tpnt;
4328 }
4329
4330 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
4331 STps = &(tpnt->ps[i]);
4332 STps->rw = ST_IDLE;
4333 STps->eof = ST_NOEOF;
4334 STps->at_sm = 0;
4335 STps->last_block_valid = 0;
4336 STps->drv_block = (-1);
4337 STps->drv_file = (-1);
4338 }
4339
4340 tpnt->current_mode = 0;
4341 tpnt->modes[0].defined = 1;
4342
4343 tpnt->density_changed = tpnt->compression_changed =
4344 tpnt->blksize_changed = 0;
4345 mutex_init(&tpnt->lock);
4346
4347 idr_preload(GFP_KERNEL);
4348 spin_lock(&st_index_lock);
4349 error = idr_alloc(&st_index_idr, tpnt, 0, ST_MAX_TAPES + 1, GFP_NOWAIT);
4350 spin_unlock(&st_index_lock);
4351 idr_preload_end();
4352 if (error < 0) {
4353 pr_warn("st: idr allocation failed: %d\n", error);
4354 goto out_free_tape;
4355 }
4356 tpnt->index = error;
4357 sprintf(tpnt->name, "st%d", tpnt->index);
4358 tpnt->stats = kzalloc(sizeof(struct scsi_tape_stats), GFP_KERNEL);
4359 if (tpnt->stats == NULL) {
4360 sdev_printk(KERN_ERR, SDp,
4361 "st: Can't allocate statistics.\n");
4362 goto out_idr_remove;
4363 }
4364
4365 dev_set_drvdata(dev, tpnt);
4366
4367
4368 error = create_cdevs(tpnt);
4369 if (error)
4370 goto out_remove_devs;
4371 scsi_autopm_put_device(SDp);
4372
4373 sdev_printk(KERN_NOTICE, SDp,
4374 "Attached scsi tape %s\n", tpnt->name);
4375 sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
4376 tpnt->name, tpnt->try_dio ? "yes" : "no",
4377 queue_dma_alignment(SDp->request_queue) + 1);
4378
4379 return 0;
4380
4381out_remove_devs:
4382 remove_cdevs(tpnt);
4383 kfree(tpnt->stats);
4384out_idr_remove:
4385 spin_lock(&st_index_lock);
4386 idr_remove(&st_index_idr, tpnt->index);
4387 spin_unlock(&st_index_lock);
4388out_free_tape:
4389 kfree(tpnt);
4390out_buffer_free:
4391 kfree(buffer);
4392out:
4393 scsi_autopm_put_device(SDp);
4394 return -ENODEV;
4395};
4396
4397
4398static int st_remove(struct device *dev)
4399{
4400 struct scsi_tape *tpnt = dev_get_drvdata(dev);
4401 int index = tpnt->index;
4402
4403 scsi_autopm_get_device(to_scsi_device(dev));
4404 remove_cdevs(tpnt);
4405
4406 mutex_lock(&st_ref_mutex);
4407 kref_put(&tpnt->kref, scsi_tape_release);
4408 mutex_unlock(&st_ref_mutex);
4409 spin_lock(&st_index_lock);
4410 idr_remove(&st_index_idr, index);
4411 spin_unlock(&st_index_lock);
4412 return 0;
4413}
4414
4415/**
4416 * scsi_tape_release - Called to free the Scsi_Tape structure
4417 * @kref: pointer to embedded kref
4418 *
4419 * st_ref_mutex must be held entering this routine. Because it is
4420 * called on last put, you should always use the scsi_tape_get()
4421 * scsi_tape_put() helpers which manipulate the semaphore directly
4422 * and never do a direct kref_put().
4423 **/
4424static void scsi_tape_release(struct kref *kref)
4425{
4426 struct scsi_tape *tpnt = to_scsi_tape(kref);
4427
4428 tpnt->device = NULL;
4429
4430 if (tpnt->buffer) {
4431 normalize_buffer(tpnt->buffer);
4432 kfree(tpnt->buffer->reserved_pages);
4433 kfree(tpnt->buffer);
4434 }
4435
4436 kfree(tpnt->stats);
4437 kfree(tpnt);
4438 return;
4439}
4440
4441static const struct class st_sysfs_class = {
4442 .name = "scsi_tape",
4443 .dev_groups = st_dev_groups,
4444};
4445
4446static int __init init_st(void)
4447{
4448 int err;
4449
4450 validate_options();
4451
4452 printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
4453 verstr, st_fixed_buffer_size, st_max_sg_segs);
4454
4455 debugging = (debug_flag > 0) ? debug_flag : NO_DEBUG;
4456 if (debugging) {
4457 printk(KERN_INFO "st: Debugging enabled debug_flag = %d\n",
4458 debugging);
4459 }
4460
4461 err = class_register(&st_sysfs_class);
4462 if (err) {
4463 pr_err("Unable register sysfs class for SCSI tapes\n");
4464 return err;
4465 }
4466
4467 err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4468 ST_MAX_TAPE_ENTRIES, "st");
4469 if (err) {
4470 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
4471 SCSI_TAPE_MAJOR);
4472 goto err_class;
4473 }
4474
4475 err = scsi_register_driver(&st_template.gendrv);
4476 if (err)
4477 goto err_chrdev;
4478
4479 return 0;
4480
4481err_chrdev:
4482 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4483 ST_MAX_TAPE_ENTRIES);
4484err_class:
4485 class_unregister(&st_sysfs_class);
4486 return err;
4487}
4488
4489static void __exit exit_st(void)
4490{
4491 scsi_unregister_driver(&st_template.gendrv);
4492 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4493 ST_MAX_TAPE_ENTRIES);
4494 class_unregister(&st_sysfs_class);
4495 idr_destroy(&st_index_idr);
4496 printk(KERN_INFO "st: Unloaded.\n");
4497}
4498
4499module_init(init_st);
4500module_exit(exit_st);
4501
4502
4503/* The sysfs driver interface. Read-only at the moment */
4504static ssize_t try_direct_io_show(struct device_driver *ddp, char *buf)
4505{
4506 return scnprintf(buf, PAGE_SIZE, "%d\n", try_direct_io);
4507}
4508static DRIVER_ATTR_RO(try_direct_io);
4509
4510static ssize_t fixed_buffer_size_show(struct device_driver *ddp, char *buf)
4511{
4512 return scnprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size);
4513}
4514static DRIVER_ATTR_RO(fixed_buffer_size);
4515
4516static ssize_t max_sg_segs_show(struct device_driver *ddp, char *buf)
4517{
4518 return scnprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs);
4519}
4520static DRIVER_ATTR_RO(max_sg_segs);
4521
4522static ssize_t version_show(struct device_driver *ddd, char *buf)
4523{
4524 return scnprintf(buf, PAGE_SIZE, "[%s]\n", verstr);
4525}
4526static DRIVER_ATTR_RO(version);
4527
4528#if DEBUG
4529static ssize_t debug_flag_store(struct device_driver *ddp,
4530 const char *buf, size_t count)
4531{
4532/* We only care what the first byte of the data is the rest is unused.
4533 * if it's a '1' we turn on debug and if it's a '0' we disable it. All
4534 * other values have -EINVAL returned if they are passed in.
4535 */
4536 if (count > 0) {
4537 if (buf[0] == '0') {
4538 debugging = NO_DEBUG;
4539 return count;
4540 } else if (buf[0] == '1') {
4541 debugging = 1;
4542 return count;
4543 }
4544 }
4545 return -EINVAL;
4546}
4547
4548static ssize_t debug_flag_show(struct device_driver *ddp, char *buf)
4549{
4550 return scnprintf(buf, PAGE_SIZE, "%d\n", debugging);
4551}
4552static DRIVER_ATTR_RW(debug_flag);
4553#endif
4554
4555static struct attribute *st_drv_attrs[] = {
4556 &driver_attr_try_direct_io.attr,
4557 &driver_attr_fixed_buffer_size.attr,
4558 &driver_attr_max_sg_segs.attr,
4559 &driver_attr_version.attr,
4560#if DEBUG
4561 &driver_attr_debug_flag.attr,
4562#endif
4563 NULL,
4564};
4565ATTRIBUTE_GROUPS(st_drv);
4566
4567/* The sysfs simple class interface */
4568static ssize_t
4569defined_show(struct device *dev, struct device_attribute *attr, char *buf)
4570{
4571 struct st_modedef *STm = dev_get_drvdata(dev);
4572 ssize_t l = 0;
4573
4574 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined);
4575 return l;
4576}
4577static DEVICE_ATTR_RO(defined);
4578
4579static ssize_t
4580default_blksize_show(struct device *dev, struct device_attribute *attr,
4581 char *buf)
4582{
4583 struct st_modedef *STm = dev_get_drvdata(dev);
4584 ssize_t l = 0;
4585
4586 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize);
4587 return l;
4588}
4589static DEVICE_ATTR_RO(default_blksize);
4590
4591static ssize_t
4592default_density_show(struct device *dev, struct device_attribute *attr,
4593 char *buf)
4594{
4595 struct st_modedef *STm = dev_get_drvdata(dev);
4596 ssize_t l = 0;
4597 char *fmt;
4598
4599 fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n";
4600 l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density);
4601 return l;
4602}
4603static DEVICE_ATTR_RO(default_density);
4604
4605static ssize_t
4606default_compression_show(struct device *dev, struct device_attribute *attr,
4607 char *buf)
4608{
4609 struct st_modedef *STm = dev_get_drvdata(dev);
4610 ssize_t l = 0;
4611
4612 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1);
4613 return l;
4614}
4615static DEVICE_ATTR_RO(default_compression);
4616
4617static ssize_t
4618options_show(struct device *dev, struct device_attribute *attr, char *buf)
4619{
4620 struct st_modedef *STm = dev_get_drvdata(dev);
4621 struct scsi_tape *STp = STm->tape;
4622 int options;
4623 ssize_t l = 0;
4624
4625 options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0;
4626 options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0;
4627 options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0;
4628 DEB( options |= debugging ? MT_ST_DEBUGGING : 0 );
4629 options |= STp->two_fm ? MT_ST_TWO_FM : 0;
4630 options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0;
4631 options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0;
4632 options |= STp->can_bsr ? MT_ST_CAN_BSR : 0;
4633 options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0;
4634 options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0;
4635 options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
4636 options |= STm->sysv ? MT_ST_SYSV : 0;
4637 options |= STp->immediate ? MT_ST_NOWAIT : 0;
4638 options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0;
4639 options |= STp->sili ? MT_ST_SILI : 0;
4640
4641 l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
4642 return l;
4643}
4644static DEVICE_ATTR_RO(options);
4645
4646/* Support for tape stats */
4647
4648/**
4649 * read_cnt_show - return read count - count of reads made from tape drive
4650 * @dev: struct device
4651 * @attr: attribute structure
4652 * @buf: buffer to return formatted data in
4653 */
4654static ssize_t read_cnt_show(struct device *dev,
4655 struct device_attribute *attr, char *buf)
4656{
4657 struct st_modedef *STm = dev_get_drvdata(dev);
4658
4659 return sprintf(buf, "%lld",
4660 (long long)atomic64_read(&STm->tape->stats->read_cnt));
4661}
4662static DEVICE_ATTR_RO(read_cnt);
4663
4664/**
4665 * read_byte_cnt_show - return read byte count - tape drives
4666 * may use blocks less than 512 bytes this gives the raw byte count of
4667 * of data read from the tape drive.
4668 * @dev: struct device
4669 * @attr: attribute structure
4670 * @buf: buffer to return formatted data in
4671 */
4672static ssize_t read_byte_cnt_show(struct device *dev,
4673 struct device_attribute *attr, char *buf)
4674{
4675 struct st_modedef *STm = dev_get_drvdata(dev);
4676
4677 return sprintf(buf, "%lld",
4678 (long long)atomic64_read(&STm->tape->stats->read_byte_cnt));
4679}
4680static DEVICE_ATTR_RO(read_byte_cnt);
4681
4682/**
4683 * read_ns_show - return read ns - overall time spent waiting on reads in ns.
4684 * @dev: struct device
4685 * @attr: attribute structure
4686 * @buf: buffer to return formatted data in
4687 */
4688static ssize_t read_ns_show(struct device *dev,
4689 struct device_attribute *attr, char *buf)
4690{
4691 struct st_modedef *STm = dev_get_drvdata(dev);
4692
4693 return sprintf(buf, "%lld",
4694 (long long)atomic64_read(&STm->tape->stats->tot_read_time));
4695}
4696static DEVICE_ATTR_RO(read_ns);
4697
4698/**
4699 * write_cnt_show - write count - number of user calls
4700 * to write(2) that have written data to tape.
4701 * @dev: struct device
4702 * @attr: attribute structure
4703 * @buf: buffer to return formatted data in
4704 */
4705static ssize_t write_cnt_show(struct device *dev,
4706 struct device_attribute *attr, char *buf)
4707{
4708 struct st_modedef *STm = dev_get_drvdata(dev);
4709
4710 return sprintf(buf, "%lld",
4711 (long long)atomic64_read(&STm->tape->stats->write_cnt));
4712}
4713static DEVICE_ATTR_RO(write_cnt);
4714
4715/**
4716 * write_byte_cnt_show - write byte count - raw count of
4717 * bytes written to tape.
4718 * @dev: struct device
4719 * @attr: attribute structure
4720 * @buf: buffer to return formatted data in
4721 */
4722static ssize_t write_byte_cnt_show(struct device *dev,
4723 struct device_attribute *attr, char *buf)
4724{
4725 struct st_modedef *STm = dev_get_drvdata(dev);
4726
4727 return sprintf(buf, "%lld",
4728 (long long)atomic64_read(&STm->tape->stats->write_byte_cnt));
4729}
4730static DEVICE_ATTR_RO(write_byte_cnt);
4731
4732/**
4733 * write_ns_show - write ns - number of nanoseconds waiting on write
4734 * requests to complete.
4735 * @dev: struct device
4736 * @attr: attribute structure
4737 * @buf: buffer to return formatted data in
4738 */
4739static ssize_t write_ns_show(struct device *dev,
4740 struct device_attribute *attr, char *buf)
4741{
4742 struct st_modedef *STm = dev_get_drvdata(dev);
4743
4744 return sprintf(buf, "%lld",
4745 (long long)atomic64_read(&STm->tape->stats->tot_write_time));
4746}
4747static DEVICE_ATTR_RO(write_ns);
4748
4749/**
4750 * in_flight_show - number of I/Os currently in flight -
4751 * in most cases this will be either 0 or 1. It may be higher if someone
4752 * has also issued other SCSI commands such as via an ioctl.
4753 * @dev: struct device
4754 * @attr: attribute structure
4755 * @buf: buffer to return formatted data in
4756 */
4757static ssize_t in_flight_show(struct device *dev,
4758 struct device_attribute *attr, char *buf)
4759{
4760 struct st_modedef *STm = dev_get_drvdata(dev);
4761
4762 return sprintf(buf, "%lld",
4763 (long long)atomic64_read(&STm->tape->stats->in_flight));
4764}
4765static DEVICE_ATTR_RO(in_flight);
4766
4767/**
4768 * io_ns_show - io wait ns - this is the number of ns spent
4769 * waiting on all I/O to complete. This includes tape movement commands
4770 * such as rewinding, seeking to end of file or tape, it also includes
4771 * read and write. To determine the time spent on tape movement
4772 * subtract the read and write ns from this value.
4773 * @dev: struct device
4774 * @attr: attribute structure
4775 * @buf: buffer to return formatted data in
4776 */
4777static ssize_t io_ns_show(struct device *dev,
4778 struct device_attribute *attr, char *buf)
4779{
4780 struct st_modedef *STm = dev_get_drvdata(dev);
4781
4782 return sprintf(buf, "%lld",
4783 (long long)atomic64_read(&STm->tape->stats->tot_io_time));
4784}
4785static DEVICE_ATTR_RO(io_ns);
4786
4787/**
4788 * other_cnt_show - other io count - this is the number of
4789 * I/O requests other than read and write requests.
4790 * Typically these are tape movement requests but will include driver
4791 * tape movement. This includes only requests issued by the st driver.
4792 * @dev: struct device
4793 * @attr: attribute structure
4794 * @buf: buffer to return formatted data in
4795 */
4796static ssize_t other_cnt_show(struct device *dev,
4797 struct device_attribute *attr, char *buf)
4798{
4799 struct st_modedef *STm = dev_get_drvdata(dev);
4800
4801 return sprintf(buf, "%lld",
4802 (long long)atomic64_read(&STm->tape->stats->other_cnt));
4803}
4804static DEVICE_ATTR_RO(other_cnt);
4805
4806/**
4807 * resid_cnt_show - A count of the number of times we get a residual
4808 * count - this should indicate someone issuing reads larger than the
4809 * block size on tape.
4810 * @dev: struct device
4811 * @attr: attribute structure
4812 * @buf: buffer to return formatted data in
4813 */
4814static ssize_t resid_cnt_show(struct device *dev,
4815 struct device_attribute *attr, char *buf)
4816{
4817 struct st_modedef *STm = dev_get_drvdata(dev);
4818
4819 return sprintf(buf, "%lld",
4820 (long long)atomic64_read(&STm->tape->stats->resid_cnt));
4821}
4822static DEVICE_ATTR_RO(resid_cnt);
4823
4824static struct attribute *st_dev_attrs[] = {
4825 &dev_attr_defined.attr,
4826 &dev_attr_default_blksize.attr,
4827 &dev_attr_default_density.attr,
4828 &dev_attr_default_compression.attr,
4829 &dev_attr_options.attr,
4830 NULL,
4831};
4832
4833static struct attribute *st_stats_attrs[] = {
4834 &dev_attr_read_cnt.attr,
4835 &dev_attr_read_byte_cnt.attr,
4836 &dev_attr_read_ns.attr,
4837 &dev_attr_write_cnt.attr,
4838 &dev_attr_write_byte_cnt.attr,
4839 &dev_attr_write_ns.attr,
4840 &dev_attr_in_flight.attr,
4841 &dev_attr_io_ns.attr,
4842 &dev_attr_other_cnt.attr,
4843 &dev_attr_resid_cnt.attr,
4844 NULL,
4845};
4846
4847static struct attribute_group stats_group = {
4848 .name = "stats",
4849 .attrs = st_stats_attrs,
4850};
4851
4852static struct attribute_group st_group = {
4853 .attrs = st_dev_attrs,
4854};
4855
4856static const struct attribute_group *st_dev_groups[] = {
4857 &st_group,
4858 &stats_group,
4859 NULL,
4860};
4861
4862/* The following functions may be useful for a larger audience. */
4863static int sgl_map_user_pages(struct st_buffer *STbp,
4864 const unsigned int max_pages, unsigned long uaddr,
4865 size_t count, int rw)
4866{
4867 unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
4868 unsigned long start = uaddr >> PAGE_SHIFT;
4869 const int nr_pages = end - start;
4870 int res, i;
4871 struct page **pages;
4872 struct rq_map_data *mdata = &STbp->map_data;
4873
4874 /* User attempted Overflow! */
4875 if ((uaddr + count) < uaddr)
4876 return -EINVAL;
4877
4878 /* Too big */
4879 if (nr_pages > max_pages)
4880 return -ENOMEM;
4881
4882 /* Hmm? */
4883 if (count == 0)
4884 return 0;
4885
4886 pages = kmalloc_array(max_pages, sizeof(*pages), GFP_KERNEL);
4887 if (pages == NULL)
4888 return -ENOMEM;
4889
4890 /* Try to fault in all of the necessary pages */
4891 /* rw==READ means read from drive, write into memory area */
4892 res = pin_user_pages_fast(uaddr, nr_pages, rw == READ ? FOLL_WRITE : 0,
4893 pages);
4894
4895 /* Errors and no page mapped should return here */
4896 if (res < nr_pages)
4897 goto out_unmap;
4898
4899 for (i=0; i < nr_pages; i++) {
4900 /* FIXME: flush superflous for rw==READ,
4901 * probably wrong function for rw==WRITE
4902 */
4903 flush_dcache_page(pages[i]);
4904 }
4905
4906 mdata->offset = uaddr & ~PAGE_MASK;
4907 STbp->mapped_pages = pages;
4908
4909 return nr_pages;
4910 out_unmap:
4911 if (res > 0) {
4912 unpin_user_pages(pages, res);
4913 res = 0;
4914 }
4915 kfree(pages);
4916 return res;
4917}
4918
4919
4920/* And unmap them... */
4921static int sgl_unmap_user_pages(struct st_buffer *STbp,
4922 const unsigned int nr_pages, int dirtied)
4923{
4924 /* FIXME: cache flush missing for rw==READ */
4925 unpin_user_pages_dirty_lock(STbp->mapped_pages, nr_pages, dirtied);
4926
4927 kfree(STbp->mapped_pages);
4928 STbp->mapped_pages = NULL;
4929
4930 return 0;
4931}