Loading...
1/*
2 * linux/arch/arm/kernel/head.S
3 *
4 * Copyright (C) 1994-2002 Russell King
5 * Copyright (c) 2003 ARM Limited
6 * All Rights Reserved
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * Kernel startup code for all 32-bit CPUs
13 */
14#include <linux/linkage.h>
15#include <linux/init.h>
16
17#include <asm/assembler.h>
18#include <asm/domain.h>
19#include <asm/ptrace.h>
20#include <asm/asm-offsets.h>
21#include <asm/memory.h>
22#include <asm/thread_info.h>
23#include <asm/system.h>
24
25#ifdef CONFIG_DEBUG_LL
26#include <mach/debug-macro.S>
27#endif
28
29/*
30 * swapper_pg_dir is the virtual address of the initial page table.
31 * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
32 * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect
33 * the least significant 16 bits to be 0x8000, but we could probably
34 * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
35 */
36#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
37#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
38#error KERNEL_RAM_VADDR must start at 0xXXXX8000
39#endif
40
41 .globl swapper_pg_dir
42 .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
43
44 .macro pgtbl, rd, phys
45 add \rd, \phys, #TEXT_OFFSET - 0x4000
46 .endm
47
48#ifdef CONFIG_XIP_KERNEL
49#define KERNEL_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
50#define KERNEL_END _edata_loc
51#else
52#define KERNEL_START KERNEL_RAM_VADDR
53#define KERNEL_END _end
54#endif
55
56/*
57 * Kernel startup entry point.
58 * ---------------------------
59 *
60 * This is normally called from the decompressor code. The requirements
61 * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
62 * r1 = machine nr, r2 = atags or dtb pointer.
63 *
64 * This code is mostly position independent, so if you link the kernel at
65 * 0xc0008000, you call this at __pa(0xc0008000).
66 *
67 * See linux/arch/arm/tools/mach-types for the complete list of machine
68 * numbers for r1.
69 *
70 * We're trying to keep crap to a minimum; DO NOT add any machine specific
71 * crap here - that's what the boot loader (or in extreme, well justified
72 * circumstances, zImage) is for.
73 */
74 .arm
75
76 __HEAD
77ENTRY(stext)
78
79 THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
80 THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
81 THUMB( .thumb ) @ switch to Thumb now.
82 THUMB(1: )
83
84 setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
85 @ and irqs disabled
86 mrc p15, 0, r9, c0, c0 @ get processor id
87 bl __lookup_processor_type @ r5=procinfo r9=cpuid
88 movs r10, r5 @ invalid processor (r5=0)?
89 THUMB( it eq ) @ force fixup-able long branch encoding
90 beq __error_p @ yes, error 'p'
91
92#ifndef CONFIG_XIP_KERNEL
93 adr r3, 2f
94 ldmia r3, {r4, r8}
95 sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
96 add r8, r8, r4 @ PHYS_OFFSET
97#else
98 ldr r8, =PLAT_PHYS_OFFSET
99#endif
100
101 /*
102 * r1 = machine no, r2 = atags or dtb,
103 * r8 = phys_offset, r9 = cpuid, r10 = procinfo
104 */
105 bl __vet_atags
106#ifdef CONFIG_SMP_ON_UP
107 bl __fixup_smp
108#endif
109#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
110 bl __fixup_pv_table
111#endif
112 bl __create_page_tables
113
114 /*
115 * The following calls CPU specific code in a position independent
116 * manner. See arch/arm/mm/proc-*.S for details. r10 = base of
117 * xxx_proc_info structure selected by __lookup_processor_type
118 * above. On return, the CPU will be ready for the MMU to be
119 * turned on, and r0 will hold the CPU control register value.
120 */
121 ldr r13, =__mmap_switched @ address to jump to after
122 @ mmu has been enabled
123 adr lr, BSYM(1f) @ return (PIC) address
124 mov r8, r4 @ set TTBR1 to swapper_pg_dir
125 ARM( add pc, r10, #PROCINFO_INITFUNC )
126 THUMB( add r12, r10, #PROCINFO_INITFUNC )
127 THUMB( mov pc, r12 )
1281: b __enable_mmu
129ENDPROC(stext)
130 .ltorg
131#ifndef CONFIG_XIP_KERNEL
1322: .long .
133 .long PAGE_OFFSET
134#endif
135
136/*
137 * Setup the initial page tables. We only setup the barest
138 * amount which are required to get the kernel running, which
139 * generally means mapping in the kernel code.
140 *
141 * r8 = phys_offset, r9 = cpuid, r10 = procinfo
142 *
143 * Returns:
144 * r0, r3, r5-r7 corrupted
145 * r4 = physical page table address
146 */
147__create_page_tables:
148 pgtbl r4, r8 @ page table address
149
150 /*
151 * Clear the 16K level 1 swapper page table
152 */
153 mov r0, r4
154 mov r3, #0
155 add r6, r0, #0x4000
1561: str r3, [r0], #4
157 str r3, [r0], #4
158 str r3, [r0], #4
159 str r3, [r0], #4
160 teq r0, r6
161 bne 1b
162
163 ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
164
165 /*
166 * Create identity mapping to cater for __enable_mmu.
167 * This identity mapping will be removed by paging_init().
168 */
169 adr r0, __enable_mmu_loc
170 ldmia r0, {r3, r5, r6}
171 sub r0, r0, r3 @ virt->phys offset
172 add r5, r5, r0 @ phys __enable_mmu
173 add r6, r6, r0 @ phys __enable_mmu_end
174 mov r5, r5, lsr #20
175 mov r6, r6, lsr #20
176
1771: orr r3, r7, r5, lsl #20 @ flags + kernel base
178 str r3, [r4, r5, lsl #2] @ identity mapping
179 teq r5, r6
180 addne r5, r5, #1 @ next section
181 bne 1b
182
183 /*
184 * Now setup the pagetables for our kernel direct
185 * mapped region.
186 */
187 mov r3, pc
188 mov r3, r3, lsr #20
189 orr r3, r7, r3, lsl #20
190 add r0, r4, #(KERNEL_START & 0xff000000) >> 18
191 str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
192 ldr r6, =(KERNEL_END - 1)
193 add r0, r0, #4
194 add r6, r4, r6, lsr #18
1951: cmp r0, r6
196 add r3, r3, #1 << 20
197 strls r3, [r0], #4
198 bls 1b
199
200#ifdef CONFIG_XIP_KERNEL
201 /*
202 * Map some ram to cover our .data and .bss areas.
203 */
204 add r3, r8, #TEXT_OFFSET
205 orr r3, r3, r7
206 add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18
207 str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
208 ldr r6, =(_end - 1)
209 add r0, r0, #4
210 add r6, r4, r6, lsr #18
2111: cmp r0, r6
212 add r3, r3, #1 << 20
213 strls r3, [r0], #4
214 bls 1b
215#endif
216
217 /*
218 * Then map boot params address in r2 or
219 * the first 1MB of ram if boot params address is not specified.
220 */
221 mov r0, r2, lsr #20
222 movs r0, r0, lsl #20
223 moveq r0, r8
224 sub r3, r0, r8
225 add r3, r3, #PAGE_OFFSET
226 add r3, r4, r3, lsr #18
227 orr r6, r7, r0
228 str r6, [r3]
229
230#ifdef CONFIG_DEBUG_LL
231#ifndef CONFIG_DEBUG_ICEDCC
232 /*
233 * Map in IO space for serial debugging.
234 * This allows debug messages to be output
235 * via a serial console before paging_init.
236 */
237 addruart r7, r3
238
239 mov r3, r3, lsr #20
240 mov r3, r3, lsl #2
241
242 add r0, r4, r3
243 rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long)
244 cmp r3, #0x0800 @ limit to 512MB
245 movhi r3, #0x0800
246 add r6, r0, r3
247 mov r3, r7, lsr #20
248 ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
249 orr r3, r7, r3, lsl #20
2501: str r3, [r0], #4
251 add r3, r3, #1 << 20
252 teq r0, r6
253 bne 1b
254
255#else /* CONFIG_DEBUG_ICEDCC */
256 /* we don't need any serial debugging mappings for ICEDCC */
257 ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
258#endif /* !CONFIG_DEBUG_ICEDCC */
259
260#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
261 /*
262 * If we're using the NetWinder or CATS, we also need to map
263 * in the 16550-type serial port for the debug messages
264 */
265 add r0, r4, #0xff000000 >> 18
266 orr r3, r7, #0x7c000000
267 str r3, [r0]
268#endif
269#ifdef CONFIG_ARCH_RPC
270 /*
271 * Map in screen at 0x02000000 & SCREEN2_BASE
272 * Similar reasons here - for debug. This is
273 * only for Acorn RiscPC architectures.
274 */
275 add r0, r4, #0x02000000 >> 18
276 orr r3, r7, #0x02000000
277 str r3, [r0]
278 add r0, r4, #0xd8000000 >> 18
279 str r3, [r0]
280#endif
281#endif
282 mov pc, lr
283ENDPROC(__create_page_tables)
284 .ltorg
285 .align
286__enable_mmu_loc:
287 .long .
288 .long __enable_mmu
289 .long __enable_mmu_end
290
291#if defined(CONFIG_SMP)
292 __CPUINIT
293ENTRY(secondary_startup)
294 /*
295 * Common entry point for secondary CPUs.
296 *
297 * Ensure that we're in SVC mode, and IRQs are disabled. Lookup
298 * the processor type - there is no need to check the machine type
299 * as it has already been validated by the primary processor.
300 */
301 setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
302 mrc p15, 0, r9, c0, c0 @ get processor id
303 bl __lookup_processor_type
304 movs r10, r5 @ invalid processor?
305 moveq r0, #'p' @ yes, error 'p'
306 THUMB( it eq ) @ force fixup-able long branch encoding
307 beq __error_p
308
309 /*
310 * Use the page tables supplied from __cpu_up.
311 */
312 adr r4, __secondary_data
313 ldmia r4, {r5, r7, r12} @ address to jump to after
314 sub lr, r4, r5 @ mmu has been enabled
315 ldr r4, [r7, lr] @ get secondary_data.pgdir
316 add r7, r7, #4
317 ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir
318 adr lr, BSYM(__enable_mmu) @ return address
319 mov r13, r12 @ __secondary_switched address
320 ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
321 @ (return control reg)
322 THUMB( add r12, r10, #PROCINFO_INITFUNC )
323 THUMB( mov pc, r12 )
324ENDPROC(secondary_startup)
325
326 /*
327 * r6 = &secondary_data
328 */
329ENTRY(__secondary_switched)
330 ldr sp, [r7, #4] @ get secondary_data.stack
331 mov fp, #0
332 b secondary_start_kernel
333ENDPROC(__secondary_switched)
334
335 .align
336
337 .type __secondary_data, %object
338__secondary_data:
339 .long .
340 .long secondary_data
341 .long __secondary_switched
342#endif /* defined(CONFIG_SMP) */
343
344
345
346/*
347 * Setup common bits before finally enabling the MMU. Essentially
348 * this is just loading the page table pointer and domain access
349 * registers.
350 *
351 * r0 = cp#15 control register
352 * r1 = machine ID
353 * r2 = atags or dtb pointer
354 * r4 = page table pointer
355 * r9 = processor ID
356 * r13 = *virtual* address to jump to upon completion
357 */
358__enable_mmu:
359#ifdef CONFIG_ALIGNMENT_TRAP
360 orr r0, r0, #CR_A
361#else
362 bic r0, r0, #CR_A
363#endif
364#ifdef CONFIG_CPU_DCACHE_DISABLE
365 bic r0, r0, #CR_C
366#endif
367#ifdef CONFIG_CPU_BPREDICT_DISABLE
368 bic r0, r0, #CR_Z
369#endif
370#ifdef CONFIG_CPU_ICACHE_DISABLE
371 bic r0, r0, #CR_I
372#endif
373 mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
374 domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
375 domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
376 domain_val(DOMAIN_IO, DOMAIN_CLIENT))
377 mcr p15, 0, r5, c3, c0, 0 @ load domain access register
378 mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
379 b __turn_mmu_on
380ENDPROC(__enable_mmu)
381
382/*
383 * Enable the MMU. This completely changes the structure of the visible
384 * memory space. You will not be able to trace execution through this.
385 * If you have an enquiry about this, *please* check the linux-arm-kernel
386 * mailing list archives BEFORE sending another post to the list.
387 *
388 * r0 = cp#15 control register
389 * r1 = machine ID
390 * r2 = atags or dtb pointer
391 * r9 = processor ID
392 * r13 = *virtual* address to jump to upon completion
393 *
394 * other registers depend on the function called upon completion
395 */
396 .align 5
397__turn_mmu_on:
398 mov r0, r0
399 mcr p15, 0, r0, c1, c0, 0 @ write control reg
400 mrc p15, 0, r3, c0, c0, 0 @ read id reg
401 mov r3, r3
402 mov r3, r13
403 mov pc, r3
404__enable_mmu_end:
405ENDPROC(__turn_mmu_on)
406
407
408#ifdef CONFIG_SMP_ON_UP
409 __INIT
410__fixup_smp:
411 and r3, r9, #0x000f0000 @ architecture version
412 teq r3, #0x000f0000 @ CPU ID supported?
413 bne __fixup_smp_on_up @ no, assume UP
414
415 bic r3, r9, #0x00ff0000
416 bic r3, r3, #0x0000000f @ mask 0xff00fff0
417 mov r4, #0x41000000
418 orr r4, r4, #0x0000b000
419 orr r4, r4, #0x00000020 @ val 0x4100b020
420 teq r3, r4 @ ARM 11MPCore?
421 moveq pc, lr @ yes, assume SMP
422
423 mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
424 and r0, r0, #0xc0000000 @ multiprocessing extensions and
425 teq r0, #0x80000000 @ not part of a uniprocessor system?
426 moveq pc, lr @ yes, assume SMP
427
428__fixup_smp_on_up:
429 adr r0, 1f
430 ldmia r0, {r3 - r5}
431 sub r3, r0, r3
432 add r4, r4, r3
433 add r5, r5, r3
434 b __do_fixup_smp_on_up
435ENDPROC(__fixup_smp)
436
437 .align
4381: .word .
439 .word __smpalt_begin
440 .word __smpalt_end
441
442 .pushsection .data
443 .globl smp_on_up
444smp_on_up:
445 ALT_SMP(.long 1)
446 ALT_UP(.long 0)
447 .popsection
448#endif
449
450 .text
451__do_fixup_smp_on_up:
452 cmp r4, r5
453 movhs pc, lr
454 ldmia r4!, {r0, r6}
455 ARM( str r6, [r0, r3] )
456 THUMB( add r0, r0, r3 )
457#ifdef __ARMEB__
458 THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
459#endif
460 THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
461 THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3.
462 THUMB( strh r6, [r0] )
463 b __do_fixup_smp_on_up
464ENDPROC(__do_fixup_smp_on_up)
465
466ENTRY(fixup_smp)
467 stmfd sp!, {r4 - r6, lr}
468 mov r4, r0
469 add r5, r0, r1
470 mov r3, #0
471 bl __do_fixup_smp_on_up
472 ldmfd sp!, {r4 - r6, pc}
473ENDPROC(fixup_smp)
474
475#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
476
477/* __fixup_pv_table - patch the stub instructions with the delta between
478 * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
479 * can be expressed by an immediate shifter operand. The stub instruction
480 * has a form of '(add|sub) rd, rn, #imm'.
481 */
482 __HEAD
483__fixup_pv_table:
484 adr r0, 1f
485 ldmia r0, {r3-r5, r7}
486 sub r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET
487 add r4, r4, r3 @ adjust table start address
488 add r5, r5, r3 @ adjust table end address
489 add r7, r7, r3 @ adjust __pv_phys_offset address
490 str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset
491#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
492 mov r6, r3, lsr #24 @ constant for add/sub instructions
493 teq r3, r6, lsl #24 @ must be 16MiB aligned
494#else
495 mov r6, r3, lsr #16 @ constant for add/sub instructions
496 teq r3, r6, lsl #16 @ must be 64kiB aligned
497#endif
498THUMB( it ne @ cross section branch )
499 bne __error
500 str r6, [r7, #4] @ save to __pv_offset
501 b __fixup_a_pv_table
502ENDPROC(__fixup_pv_table)
503
504 .align
5051: .long .
506 .long __pv_table_begin
507 .long __pv_table_end
5082: .long __pv_phys_offset
509
510 .text
511__fixup_a_pv_table:
512#ifdef CONFIG_THUMB2_KERNEL
513#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
514 lsls r0, r6, #24
515 lsr r6, #8
516 beq 1f
517 clz r7, r0
518 lsr r0, #24
519 lsl r0, r7
520 bic r0, 0x0080
521 lsrs r7, #1
522 orrcs r0, #0x0080
523 orr r0, r0, r7, lsl #12
524#endif
5251: lsls r6, #24
526 beq 4f
527 clz r7, r6
528 lsr r6, #24
529 lsl r6, r7
530 bic r6, #0x0080
531 lsrs r7, #1
532 orrcs r6, #0x0080
533 orr r6, r6, r7, lsl #12
534 orr r6, #0x4000
535 b 4f
5362: @ at this point the C flag is always clear
537 add r7, r3
538#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
539 ldrh ip, [r7]
540 tst ip, 0x0400 @ the i bit tells us LS or MS byte
541 beq 3f
542 cmp r0, #0 @ set C flag, and ...
543 biceq ip, 0x0400 @ immediate zero value has a special encoding
544 streqh ip, [r7] @ that requires the i bit cleared
545#endif
5463: ldrh ip, [r7, #2]
547 and ip, 0x8f00
548 orrcc ip, r6 @ mask in offset bits 31-24
549 orrcs ip, r0 @ mask in offset bits 23-16
550 strh ip, [r7, #2]
5514: cmp r4, r5
552 ldrcc r7, [r4], #4 @ use branch for delay slot
553 bcc 2b
554 bx lr
555#else
556#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
557 and r0, r6, #255 @ offset bits 23-16
558 mov r6, r6, lsr #8 @ offset bits 31-24
559#else
560 mov r0, #0 @ just in case...
561#endif
562 b 3f
5632: ldr ip, [r7, r3]
564 bic ip, ip, #0x000000ff
565 tst ip, #0x400 @ rotate shift tells us LS or MS byte
566 orrne ip, ip, r6 @ mask in offset bits 31-24
567 orreq ip, ip, r0 @ mask in offset bits 23-16
568 str ip, [r7, r3]
5693: cmp r4, r5
570 ldrcc r7, [r4], #4 @ use branch for delay slot
571 bcc 2b
572 mov pc, lr
573#endif
574ENDPROC(__fixup_a_pv_table)
575
576ENTRY(fixup_pv_table)
577 stmfd sp!, {r4 - r7, lr}
578 ldr r2, 2f @ get address of __pv_phys_offset
579 mov r3, #0 @ no offset
580 mov r4, r0 @ r0 = table start
581 add r5, r0, r1 @ r1 = table size
582 ldr r6, [r2, #4] @ get __pv_offset
583 bl __fixup_a_pv_table
584 ldmfd sp!, {r4 - r7, pc}
585ENDPROC(fixup_pv_table)
586
587 .align
5882: .long __pv_phys_offset
589
590 .data
591 .globl __pv_phys_offset
592 .type __pv_phys_offset, %object
593__pv_phys_offset:
594 .long 0
595 .size __pv_phys_offset, . - __pv_phys_offset
596__pv_offset:
597 .long 0
598#endif
599
600#include "head-common.S"
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/arch/arm/kernel/head.S
4 *
5 * Copyright (C) 1994-2002 Russell King
6 * Copyright (c) 2003 ARM Limited
7 * All Rights Reserved
8 *
9 * Kernel startup code for all 32-bit CPUs
10 */
11#include <linux/linkage.h>
12#include <linux/init.h>
13#include <linux/pgtable.h>
14
15#include <asm/assembler.h>
16#include <asm/cp15.h>
17#include <asm/domain.h>
18#include <asm/ptrace.h>
19#include <asm/asm-offsets.h>
20#include <asm/page.h>
21#include <asm/thread_info.h>
22
23#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
24#include CONFIG_DEBUG_LL_INCLUDE
25#endif
26/*
27 * swapper_pg_dir is the virtual address of the initial page table.
28 * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
29 * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect
30 * the least significant 16 bits to be 0x8000, but we could probably
31 * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
32 */
33#define KERNEL_RAM_VADDR (KERNEL_OFFSET + TEXT_OFFSET)
34#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
35#error KERNEL_RAM_VADDR must start at 0xXXXX8000
36#endif
37
38#ifdef CONFIG_ARM_LPAE
39 /* LPAE requires an additional page for the PGD */
40#define PG_DIR_SIZE 0x5000
41#define PMD_ENTRY_ORDER 3 /* PMD entry size is 2^PMD_ENTRY_ORDER */
42#else
43#define PG_DIR_SIZE 0x4000
44#define PMD_ENTRY_ORDER 2
45#endif
46
47 .globl swapper_pg_dir
48 .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
49
50 /*
51 * This needs to be assigned at runtime when the linker symbols are
52 * resolved. These are unsigned 64bit really, but in this assembly code
53 * We store them as 32bit.
54 */
55 .pushsection .data
56 .align 2
57 .globl kernel_sec_start
58 .globl kernel_sec_end
59kernel_sec_start:
60 .long 0
61 .long 0
62kernel_sec_end:
63 .long 0
64 .long 0
65 .popsection
66
67 .macro pgtbl, rd, phys
68 add \rd, \phys, #TEXT_OFFSET
69 sub \rd, \rd, #PG_DIR_SIZE
70 .endm
71
72/*
73 * Kernel startup entry point.
74 * ---------------------------
75 *
76 * This is normally called from the decompressor code. The requirements
77 * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
78 * r1 = machine nr, r2 = atags or dtb pointer.
79 *
80 * This code is mostly position independent, so if you link the kernel at
81 * 0xc0008000, you call this at __pa(0xc0008000).
82 *
83 * See linux/arch/arm/tools/mach-types for the complete list of machine
84 * numbers for r1.
85 *
86 * We're trying to keep crap to a minimum; DO NOT add any machine specific
87 * crap here - that's what the boot loader (or in extreme, well justified
88 * circumstances, zImage) is for.
89 */
90 .arm
91
92 __HEAD
93ENTRY(stext)
94 ARM_BE8(setend be ) @ ensure we are in BE8 mode
95
96 THUMB( badr r9, 1f ) @ Kernel is always entered in ARM.
97 THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
98 THUMB( .thumb ) @ switch to Thumb now.
99 THUMB(1: )
100
101#ifdef CONFIG_ARM_VIRT_EXT
102 bl __hyp_stub_install
103#endif
104 @ ensure svc mode and all interrupts masked
105 safe_svcmode_maskall r9
106
107 mrc p15, 0, r9, c0, c0 @ get processor id
108 bl __lookup_processor_type @ r5=procinfo r9=cpuid
109 movs r10, r5 @ invalid processor (r5=0)?
110 THUMB( it eq ) @ force fixup-able long branch encoding
111 beq __error_p @ yes, error 'p'
112
113#ifdef CONFIG_ARM_LPAE
114 mrc p15, 0, r3, c0, c1, 4 @ read ID_MMFR0
115 and r3, r3, #0xf @ extract VMSA support
116 cmp r3, #5 @ long-descriptor translation table format?
117 THUMB( it lo ) @ force fixup-able long branch encoding
118 blo __error_lpae @ only classic page table format
119#endif
120
121#ifndef CONFIG_XIP_KERNEL
122 adr_l r8, _text @ __pa(_text)
123 sub r8, r8, #TEXT_OFFSET @ PHYS_OFFSET
124#else
125 ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case
126#endif
127
128 /*
129 * r1 = machine no, r2 = atags or dtb,
130 * r8 = phys_offset, r9 = cpuid, r10 = procinfo
131 */
132 bl __vet_atags
133#ifdef CONFIG_SMP_ON_UP
134 bl __fixup_smp
135#endif
136#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
137 bl __fixup_pv_table
138#endif
139 bl __create_page_tables
140
141 /*
142 * The following calls CPU specific code in a position independent
143 * manner. See arch/arm/mm/proc-*.S for details. r10 = base of
144 * xxx_proc_info structure selected by __lookup_processor_type
145 * above.
146 *
147 * The processor init function will be called with:
148 * r1 - machine type
149 * r2 - boot data (atags/dt) pointer
150 * r4 - translation table base (low word)
151 * r5 - translation table base (high word, if LPAE)
152 * r8 - translation table base 1 (pfn if LPAE)
153 * r9 - cpuid
154 * r13 - virtual address for __enable_mmu -> __turn_mmu_on
155 *
156 * On return, the CPU will be ready for the MMU to be turned on,
157 * r0 will hold the CPU control register value, r1, r2, r4, and
158 * r9 will be preserved. r5 will also be preserved if LPAE.
159 */
160 ldr r13, =__mmap_switched @ address to jump to after
161 @ mmu has been enabled
162 badr lr, 1f @ return (PIC) address
163#ifdef CONFIG_ARM_LPAE
164 mov r5, #0 @ high TTBR0
165 mov r8, r4, lsr #12 @ TTBR1 is swapper_pg_dir pfn
166#else
167 mov r8, r4 @ set TTBR1 to swapper_pg_dir
168#endif
169 ldr r12, [r10, #PROCINFO_INITFUNC]
170 add r12, r12, r10
171 ret r12
1721: b __enable_mmu
173ENDPROC(stext)
174 .ltorg
175
176/*
177 * Setup the initial page tables. We only setup the barest
178 * amount which are required to get the kernel running, which
179 * generally means mapping in the kernel code.
180 *
181 * r8 = phys_offset, r9 = cpuid, r10 = procinfo
182 *
183 * Returns:
184 * r0, r3, r5-r7 corrupted
185 * r4 = physical page table address
186 */
187__create_page_tables:
188 pgtbl r4, r8 @ page table address
189
190 /*
191 * Clear the swapper page table
192 */
193 mov r0, r4
194 mov r3, #0
195 add r6, r0, #PG_DIR_SIZE
1961: str r3, [r0], #4
197 str r3, [r0], #4
198 str r3, [r0], #4
199 str r3, [r0], #4
200 teq r0, r6
201 bne 1b
202
203#ifdef CONFIG_ARM_LPAE
204 /*
205 * Build the PGD table (first level) to point to the PMD table. A PGD
206 * entry is 64-bit wide.
207 */
208 mov r0, r4
209 add r3, r4, #0x1000 @ first PMD table address
210 orr r3, r3, #3 @ PGD block type
211 mov r6, #4 @ PTRS_PER_PGD
212 mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER
2131:
214#ifdef CONFIG_CPU_ENDIAN_BE8
215 str r7, [r0], #4 @ set top PGD entry bits
216 str r3, [r0], #4 @ set bottom PGD entry bits
217#else
218 str r3, [r0], #4 @ set bottom PGD entry bits
219 str r7, [r0], #4 @ set top PGD entry bits
220#endif
221 add r3, r3, #0x1000 @ next PMD table
222 subs r6, r6, #1
223 bne 1b
224
225 add r4, r4, #0x1000 @ point to the PMD tables
226#ifdef CONFIG_CPU_ENDIAN_BE8
227 add r4, r4, #4 @ we only write the bottom word
228#endif
229#endif
230
231 ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
232
233 /*
234 * Create identity mapping to cater for __enable_mmu.
235 * This identity mapping will be removed by paging_init().
236 */
237 adr_l r5, __turn_mmu_on @ _pa(__turn_mmu_on)
238 adr_l r6, __turn_mmu_on_end @ _pa(__turn_mmu_on_end)
239 mov r5, r5, lsr #SECTION_SHIFT
240 mov r6, r6, lsr #SECTION_SHIFT
241
2421: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base
243 str r3, [r4, r5, lsl #PMD_ENTRY_ORDER] @ identity mapping
244 cmp r5, r6
245 addlo r5, r5, #1 @ next section
246 blo 1b
247
248 /*
249 * The main matter: map in the kernel using section mappings, and
250 * set two variables to indicate the physical start and end of the
251 * kernel.
252 */
253 add r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
254 ldr r6, =(_end - 1)
255
256 /* For XIP, kernel_sec_start/kernel_sec_end are currently in RO memory */
257#ifndef CONFIG_XIP_KERNEL
258 adr_l r5, kernel_sec_start @ _pa(kernel_sec_start)
259#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
260 str r8, [r5, #4] @ Save physical start of kernel (BE)
261#else
262 str r8, [r5] @ Save physical start of kernel (LE)
263#endif
264#endif
265 orr r3, r8, r7 @ Add the MMU flags
266 add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
2671: str r3, [r0], #1 << PMD_ENTRY_ORDER
268 add r3, r3, #1 << SECTION_SHIFT
269 cmp r0, r6
270 bls 1b
271#ifndef CONFIG_XIP_KERNEL
272 eor r3, r3, r7 @ Remove the MMU flags
273 adr_l r5, kernel_sec_end @ _pa(kernel_sec_end)
274#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
275 str r3, [r5, #4] @ Save physical end of kernel (BE)
276#else
277 str r3, [r5] @ Save physical end of kernel (LE)
278#endif
279#else
280 /*
281 * Map the kernel image separately as it is not located in RAM.
282 */
283#define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
284 mov r3, pc
285 mov r3, r3, lsr #SECTION_SHIFT
286 orr r3, r7, r3, lsl #SECTION_SHIFT
287 add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
288 str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ENTRY_ORDER]!
289 ldr r6, =(_edata_loc - 1)
290 add r0, r0, #1 << PMD_ENTRY_ORDER
291 add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
2921: cmp r0, r6
293 add r3, r3, #1 << SECTION_SHIFT
294 strls r3, [r0], #1 << PMD_ENTRY_ORDER
295 bls 1b
296#endif
297
298 /*
299 * Then map boot params address in r2 if specified.
300 * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
301 */
302 mov r0, r2, lsr #SECTION_SHIFT
303 cmp r2, #0
304 ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
305 addne r3, r3, r4
306 orrne r6, r7, r0, lsl #SECTION_SHIFT
307 strne r6, [r3], #1 << PMD_ENTRY_ORDER
308 addne r6, r6, #1 << SECTION_SHIFT
309 strne r6, [r3]
310
311#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
312 sub r4, r4, #4 @ Fixup page table pointer
313 @ for 64-bit descriptors
314#endif
315
316#ifdef CONFIG_DEBUG_LL
317#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING)
318 /*
319 * Map in IO space for serial debugging.
320 * This allows debug messages to be output
321 * via a serial console before paging_init.
322 */
323 addruart r7, r3, r0
324
325 mov r3, r3, lsr #SECTION_SHIFT
326 mov r3, r3, lsl #PMD_ENTRY_ORDER
327
328 add r0, r4, r3
329 mov r3, r7, lsr #SECTION_SHIFT
330 ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
331 orr r3, r7, r3, lsl #SECTION_SHIFT
332#ifdef CONFIG_ARM_LPAE
333 mov r7, #1 << (54 - 32) @ XN
334#ifdef CONFIG_CPU_ENDIAN_BE8
335 str r7, [r0], #4
336 str r3, [r0], #4
337#else
338 str r3, [r0], #4
339 str r7, [r0], #4
340#endif
341#else
342 orr r3, r3, #PMD_SECT_XN
343 str r3, [r0], #4
344#endif
345
346#else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */
347 /* we don't need any serial debugging mappings */
348 ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
349#endif
350
351#if defined(CONFIG_ARCH_NETWINDER)
352 /*
353 * If we're using the NetWinder or CATS, we also need to map
354 * in the 16550-type serial port for the debug messages
355 */
356 add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
357 orr r3, r7, #0x7c000000
358 str r3, [r0]
359#endif
360#ifdef CONFIG_ARCH_RPC
361 /*
362 * Map in screen at 0x02000000 & SCREEN2_BASE
363 * Similar reasons here - for debug. This is
364 * only for Acorn RiscPC architectures.
365 */
366 add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
367 orr r3, r7, #0x02000000
368 str r3, [r0]
369 add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
370 str r3, [r0]
371#endif
372#endif
373#ifdef CONFIG_ARM_LPAE
374 sub r4, r4, #0x1000 @ point to the PGD table
375#endif
376 ret lr
377ENDPROC(__create_page_tables)
378 .ltorg
379
380#if defined(CONFIG_SMP)
381 .text
382 .arm
383ENTRY(secondary_startup_arm)
384 THUMB( badr r9, 1f ) @ Kernel is entered in ARM.
385 THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
386 THUMB( .thumb ) @ switch to Thumb now.
387 THUMB(1: )
388ENTRY(secondary_startup)
389 /*
390 * Common entry point for secondary CPUs.
391 *
392 * Ensure that we're in SVC mode, and IRQs are disabled. Lookup
393 * the processor type - there is no need to check the machine type
394 * as it has already been validated by the primary processor.
395 */
396
397 ARM_BE8(setend be) @ ensure we are in BE8 mode
398
399#ifdef CONFIG_ARM_VIRT_EXT
400 bl __hyp_stub_install_secondary
401#endif
402 safe_svcmode_maskall r9
403
404 mrc p15, 0, r9, c0, c0 @ get processor id
405 bl __lookup_processor_type
406 movs r10, r5 @ invalid processor?
407 moveq r0, #'p' @ yes, error 'p'
408 THUMB( it eq ) @ force fixup-able long branch encoding
409 beq __error_p
410
411 /*
412 * Use the page tables supplied from __cpu_up.
413 */
414#ifdef CONFIG_XIP_KERNEL
415 ldr r3, =(secondary_data + PLAT_PHYS_OFFSET - PAGE_OFFSET)
416#else
417 adr_l r3, secondary_data
418#endif
419 mov_l r12, __secondary_switched
420 ldrd r4, r5, [r3, #0] @ get secondary_data.pgdir
421ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE:
422ARM_BE8(eor r5, r4, r5) @ it can be done in 3 steps
423ARM_BE8(eor r4, r4, r5) @ without using a temp reg.
424 ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir
425 badr lr, __enable_mmu @ return address
426 mov r13, r12 @ __secondary_switched address
427 ldr r12, [r10, #PROCINFO_INITFUNC]
428 add r12, r12, r10 @ initialise processor
429 @ (return control reg)
430 ret r12
431ENDPROC(secondary_startup)
432ENDPROC(secondary_startup_arm)
433
434ENTRY(__secondary_switched)
435#if defined(CONFIG_VMAP_STACK) && !defined(CONFIG_ARM_LPAE)
436 @ Before using the vmap'ed stack, we have to switch to swapper_pg_dir
437 @ as the ID map does not cover the vmalloc region.
438 mrc p15, 0, ip, c2, c0, 1 @ read TTBR1
439 mcr p15, 0, ip, c2, c0, 0 @ set TTBR0
440 instr_sync
441#endif
442 adr_l r7, secondary_data + 12 @ get secondary_data.stack
443 ldr sp, [r7]
444 ldr r0, [r7, #4] @ get secondary_data.task
445 mov fp, #0
446 b secondary_start_kernel
447ENDPROC(__secondary_switched)
448
449#endif /* defined(CONFIG_SMP) */
450
451
452
453/*
454 * Setup common bits before finally enabling the MMU. Essentially
455 * this is just loading the page table pointer and domain access
456 * registers. All these registers need to be preserved by the
457 * processor setup function (or set in the case of r0)
458 *
459 * r0 = cp#15 control register
460 * r1 = machine ID
461 * r2 = atags or dtb pointer
462 * r4 = TTBR pointer (low word)
463 * r5 = TTBR pointer (high word if LPAE)
464 * r9 = processor ID
465 * r13 = *virtual* address to jump to upon completion
466 */
467__enable_mmu:
468#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
469 orr r0, r0, #CR_A
470#else
471 bic r0, r0, #CR_A
472#endif
473#ifdef CONFIG_CPU_DCACHE_DISABLE
474 bic r0, r0, #CR_C
475#endif
476#ifdef CONFIG_CPU_BPREDICT_DISABLE
477 bic r0, r0, #CR_Z
478#endif
479#ifdef CONFIG_CPU_ICACHE_DISABLE
480 bic r0, r0, #CR_I
481#endif
482#ifdef CONFIG_ARM_LPAE
483 mcrr p15, 0, r4, r5, c2 @ load TTBR0
484#else
485 mov r5, #DACR_INIT
486 mcr p15, 0, r5, c3, c0, 0 @ load domain access register
487 mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
488#endif
489 b __turn_mmu_on
490ENDPROC(__enable_mmu)
491
492/*
493 * Enable the MMU. This completely changes the structure of the visible
494 * memory space. You will not be able to trace execution through this.
495 * If you have an enquiry about this, *please* check the linux-arm-kernel
496 * mailing list archives BEFORE sending another post to the list.
497 *
498 * r0 = cp#15 control register
499 * r1 = machine ID
500 * r2 = atags or dtb pointer
501 * r9 = processor ID
502 * r13 = *virtual* address to jump to upon completion
503 *
504 * other registers depend on the function called upon completion
505 */
506 .align 5
507 .pushsection .idmap.text, "ax"
508ENTRY(__turn_mmu_on)
509 mov r0, r0
510 instr_sync
511 mcr p15, 0, r0, c1, c0, 0 @ write control reg
512 mrc p15, 0, r3, c0, c0, 0 @ read id reg
513 instr_sync
514 mov r3, r3
515 mov r3, r13
516 ret r3
517__turn_mmu_on_end:
518ENDPROC(__turn_mmu_on)
519 .popsection
520
521
522#ifdef CONFIG_SMP_ON_UP
523 __HEAD
524__fixup_smp:
525 and r3, r9, #0x000f0000 @ architecture version
526 teq r3, #0x000f0000 @ CPU ID supported?
527 bne __fixup_smp_on_up @ no, assume UP
528
529 bic r3, r9, #0x00ff0000
530 bic r3, r3, #0x0000000f @ mask 0xff00fff0
531 mov r4, #0x41000000
532 orr r4, r4, #0x0000b000
533 orr r4, r4, #0x00000020 @ val 0x4100b020
534 teq r3, r4 @ ARM 11MPCore?
535 reteq lr @ yes, assume SMP
536
537 mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
538 and r0, r0, #0xc0000000 @ multiprocessing extensions and
539 teq r0, #0x80000000 @ not part of a uniprocessor system?
540 bne __fixup_smp_on_up @ no, assume UP
541
542 @ Core indicates it is SMP. Check for Aegis SOC where a single
543 @ Cortex-A9 CPU is present but SMP operations fault.
544 mov r4, #0x41000000
545 orr r4, r4, #0x0000c000
546 orr r4, r4, #0x00000090
547 teq r3, r4 @ Check for ARM Cortex-A9
548 retne lr @ Not ARM Cortex-A9,
549
550 @ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
551 @ below address check will need to be #ifdef'd or equivalent
552 @ for the Aegis platform.
553 mrc p15, 4, r0, c15, c0 @ get SCU base address
554 teq r0, #0x0 @ '0' on actual UP A9 hardware
555 beq __fixup_smp_on_up @ So its an A9 UP
556 ldr r0, [r0, #4] @ read SCU Config
557ARM_BE8(rev r0, r0) @ byteswap if big endian
558 and r0, r0, #0x3 @ number of CPUs
559 teq r0, #0x0 @ is 1?
560 retne lr
561
562__fixup_smp_on_up:
563 adr_l r4, __smpalt_begin
564 adr_l r5, __smpalt_end
565 b __do_fixup_smp_on_up
566ENDPROC(__fixup_smp)
567
568 .pushsection .data
569 .align 2
570 .globl smp_on_up
571smp_on_up:
572 ALT_SMP(.long 1)
573 ALT_UP(.long 0)
574 .popsection
575#endif
576
577 .text
578__do_fixup_smp_on_up:
579 cmp r4, r5
580 reths lr
581 ldmia r4, {r0, r6}
582 ARM( str r6, [r0, r4] )
583 THUMB( add r0, r0, r4 )
584 add r4, r4, #8
585#ifdef __ARMEB__
586 THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
587#endif
588 THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
589 THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r0.
590 THUMB( strh r6, [r0] )
591 b __do_fixup_smp_on_up
592ENDPROC(__do_fixup_smp_on_up)
593
594ENTRY(fixup_smp)
595 stmfd sp!, {r4 - r6, lr}
596 mov r4, r0
597 add r5, r0, r1
598 bl __do_fixup_smp_on_up
599 ldmfd sp!, {r4 - r6, pc}
600ENDPROC(fixup_smp)
601
602#include "head-common.S"