Loading...
Note: File does not exist in v3.1.
1# SPDX-License-Identifier: GPL-2.0-only
2menu "IRQ chip support"
3
4config IRQCHIP
5 def_bool y
6 depends on OF_IRQ
7
8config ARM_GIC
9 bool
10 select IRQ_DOMAIN_HIERARCHY
11 select GENERIC_IRQ_MULTI_HANDLER
12 select GENERIC_IRQ_EFFECTIVE_AFF_MASK
13
14config ARM_GIC_PM
15 bool
16 depends on PM
17 select ARM_GIC
18
19config ARM_GIC_MAX_NR
20 int
21 depends on ARM_GIC
22 default 2 if ARCH_REALVIEW
23 default 1
24
25config ARM_GIC_V2M
26 bool
27 depends on PCI
28 select ARM_GIC
29 select PCI_MSI
30
31config GIC_NON_BANKED
32 bool
33
34config ARM_GIC_V3
35 bool
36 select GENERIC_IRQ_MULTI_HANDLER
37 select IRQ_DOMAIN_HIERARCHY
38 select PARTITION_PERCPU
39 select GENERIC_IRQ_EFFECTIVE_AFF_MASK
40
41config ARM_GIC_V3_ITS
42 bool
43 select GENERIC_MSI_IRQ_DOMAIN
44 default ARM_GIC_V3
45
46config ARM_GIC_V3_ITS_PCI
47 bool
48 depends on ARM_GIC_V3_ITS
49 depends on PCI
50 depends on PCI_MSI
51 default ARM_GIC_V3_ITS
52
53config ARM_GIC_V3_ITS_FSL_MC
54 bool
55 depends on ARM_GIC_V3_ITS
56 depends on FSL_MC_BUS
57 default ARM_GIC_V3_ITS
58
59config ARM_NVIC
60 bool
61 select IRQ_DOMAIN_HIERARCHY
62 select GENERIC_IRQ_CHIP
63
64config ARM_VIC
65 bool
66 select IRQ_DOMAIN
67 select GENERIC_IRQ_MULTI_HANDLER
68
69config ARM_VIC_NR
70 int
71 default 4 if ARCH_S5PV210
72 default 2
73 depends on ARM_VIC
74 help
75 The maximum number of VICs available in the system, for
76 power management.
77
78config ARMADA_370_XP_IRQ
79 bool
80 select GENERIC_IRQ_CHIP
81 select PCI_MSI if PCI
82 select GENERIC_IRQ_EFFECTIVE_AFF_MASK
83
84config ALPINE_MSI
85 bool
86 depends on PCI
87 select PCI_MSI
88 select GENERIC_IRQ_CHIP
89
90config AL_FIC
91 bool "Amazon's Annapurna Labs Fabric Interrupt Controller"
92 depends on OF || COMPILE_TEST
93 select GENERIC_IRQ_CHIP
94 select IRQ_DOMAIN
95 help
96 Support Amazon's Annapurna Labs Fabric Interrupt Controller.
97
98config ATMEL_AIC_IRQ
99 bool
100 select GENERIC_IRQ_CHIP
101 select IRQ_DOMAIN
102 select GENERIC_IRQ_MULTI_HANDLER
103 select SPARSE_IRQ
104
105config ATMEL_AIC5_IRQ
106 bool
107 select GENERIC_IRQ_CHIP
108 select IRQ_DOMAIN
109 select GENERIC_IRQ_MULTI_HANDLER
110 select SPARSE_IRQ
111
112config I8259
113 bool
114 select IRQ_DOMAIN
115
116config BCM6345_L1_IRQ
117 bool
118 select GENERIC_IRQ_CHIP
119 select IRQ_DOMAIN
120 select GENERIC_IRQ_EFFECTIVE_AFF_MASK
121
122config BCM7038_L1_IRQ
123 bool
124 select GENERIC_IRQ_CHIP
125 select IRQ_DOMAIN
126 select GENERIC_IRQ_EFFECTIVE_AFF_MASK
127
128config BCM7120_L2_IRQ
129 bool
130 select GENERIC_IRQ_CHIP
131 select IRQ_DOMAIN
132
133config BRCMSTB_L2_IRQ
134 bool
135 select GENERIC_IRQ_CHIP
136 select IRQ_DOMAIN
137
138config DAVINCI_AINTC
139 bool
140 select GENERIC_IRQ_CHIP
141 select IRQ_DOMAIN
142
143config DAVINCI_CP_INTC
144 bool
145 select GENERIC_IRQ_CHIP
146 select IRQ_DOMAIN
147
148config DW_APB_ICTL
149 bool
150 select GENERIC_IRQ_CHIP
151 select IRQ_DOMAIN
152
153config FARADAY_FTINTC010
154 bool
155 select IRQ_DOMAIN
156 select GENERIC_IRQ_MULTI_HANDLER
157 select SPARSE_IRQ
158
159config HISILICON_IRQ_MBIGEN
160 bool
161 select ARM_GIC_V3
162 select ARM_GIC_V3_ITS
163
164config IMGPDC_IRQ
165 bool
166 select GENERIC_IRQ_CHIP
167 select IRQ_DOMAIN
168
169config IXP4XX_IRQ
170 bool
171 select IRQ_DOMAIN
172 select GENERIC_IRQ_MULTI_HANDLER
173 select SPARSE_IRQ
174
175config MADERA_IRQ
176 tristate
177
178config IRQ_MIPS_CPU
179 bool
180 select GENERIC_IRQ_CHIP
181 select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
182 select IRQ_DOMAIN
183 select IRQ_DOMAIN_HIERARCHY if GENERIC_IRQ_IPI
184 select GENERIC_IRQ_EFFECTIVE_AFF_MASK
185
186config CLPS711X_IRQCHIP
187 bool
188 depends on ARCH_CLPS711X
189 select IRQ_DOMAIN
190 select GENERIC_IRQ_MULTI_HANDLER
191 select SPARSE_IRQ
192 default y
193
194config OMPIC
195 bool
196
197config OR1K_PIC
198 bool
199 select IRQ_DOMAIN
200
201config OMAP_IRQCHIP
202 bool
203 select GENERIC_IRQ_CHIP
204 select IRQ_DOMAIN
205
206config ORION_IRQCHIP
207 bool
208 select IRQ_DOMAIN
209 select GENERIC_IRQ_MULTI_HANDLER
210
211config PIC32_EVIC
212 bool
213 select GENERIC_IRQ_CHIP
214 select IRQ_DOMAIN
215
216config JCORE_AIC
217 bool "J-Core integrated AIC" if COMPILE_TEST
218 depends on OF
219 select IRQ_DOMAIN
220 help
221 Support for the J-Core integrated AIC.
222
223config RDA_INTC
224 bool
225 select IRQ_DOMAIN
226
227config RENESAS_INTC_IRQPIN
228 bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
229 select IRQ_DOMAIN
230 help
231 Enable support for the Renesas Interrupt Controller for external
232 interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
233
234config RENESAS_IRQC
235 bool "Renesas R-Mobile APE6 and R-Car IRQC support" if COMPILE_TEST
236 select GENERIC_IRQ_CHIP
237 select IRQ_DOMAIN
238 help
239 Enable support for the Renesas Interrupt Controller for external
240 devices, as found on R-Mobile APE6, R-Car Gen2, and R-Car Gen3 SoCs.
241
242config RENESAS_RZA1_IRQC
243 bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
244 select IRQ_DOMAIN_HIERARCHY
245 help
246 Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
247 to 8 external interrupts with configurable sense select.
248
249config ST_IRQCHIP
250 bool
251 select REGMAP
252 select MFD_SYSCON
253 help
254 Enables SysCfg Controlled IRQs on STi based platforms.
255
256config TANGO_IRQ
257 bool
258 select IRQ_DOMAIN
259 select GENERIC_IRQ_CHIP
260
261config TB10X_IRQC
262 bool
263 select IRQ_DOMAIN
264 select GENERIC_IRQ_CHIP
265
266config TS4800_IRQ
267 tristate "TS-4800 IRQ controller"
268 select IRQ_DOMAIN
269 depends on HAS_IOMEM
270 depends on SOC_IMX51 || COMPILE_TEST
271 help
272 Support for the TS-4800 FPGA IRQ controller
273
274config VERSATILE_FPGA_IRQ
275 bool
276 select IRQ_DOMAIN
277
278config VERSATILE_FPGA_IRQ_NR
279 int
280 default 4
281 depends on VERSATILE_FPGA_IRQ
282
283config XTENSA_MX
284 bool
285 select IRQ_DOMAIN
286 select GENERIC_IRQ_EFFECTIVE_AFF_MASK
287
288config XILINX_INTC
289 bool
290 select IRQ_DOMAIN
291
292config IRQ_CROSSBAR
293 bool
294 help
295 Support for a CROSSBAR ip that precedes the main interrupt controller.
296 The primary irqchip invokes the crossbar's callback which inturn allocates
297 a free irq and configures the IP. Thus the peripheral interrupts are
298 routed to one of the free irqchip interrupt lines.
299
300config KEYSTONE_IRQ
301 tristate "Keystone 2 IRQ controller IP"
302 depends on ARCH_KEYSTONE
303 help
304 Support for Texas Instruments Keystone 2 IRQ controller IP which
305 is part of the Keystone 2 IPC mechanism
306
307config MIPS_GIC
308 bool
309 select GENERIC_IRQ_IPI
310 select IRQ_DOMAIN_HIERARCHY
311 select MIPS_CM
312
313config INGENIC_IRQ
314 bool
315 depends on MACH_INGENIC
316 default y
317
318config INGENIC_TCU_IRQ
319 bool "Ingenic JZ47xx TCU interrupt controller"
320 default MACH_INGENIC
321 depends on MIPS || COMPILE_TEST
322 select MFD_SYSCON
323 select GENERIC_IRQ_CHIP
324 help
325 Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic
326 JZ47xx SoCs.
327
328 If unsure, say N.
329
330config RENESAS_H8300H_INTC
331 bool
332 select IRQ_DOMAIN
333
334config RENESAS_H8S_INTC
335 bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
336 select IRQ_DOMAIN
337 help
338 Enable support for the Renesas H8/300 Interrupt Controller, as found
339 on Renesas H8S SoCs.
340
341config IMX_GPCV2
342 bool
343 select IRQ_DOMAIN
344 help
345 Enables the wakeup IRQs for IMX platforms with GPCv2 block
346
347config IRQ_MXS
348 def_bool y if MACH_ASM9260 || ARCH_MXS
349 select IRQ_DOMAIN
350 select STMP_DEVICE
351
352config MSCC_OCELOT_IRQ
353 bool
354 select IRQ_DOMAIN
355 select GENERIC_IRQ_CHIP
356
357config MVEBU_GICP
358 bool
359
360config MVEBU_ICU
361 bool
362
363config MVEBU_ODMI
364 bool
365 select GENERIC_MSI_IRQ_DOMAIN
366
367config MVEBU_PIC
368 bool
369
370config MVEBU_SEI
371 bool
372
373config LS_EXTIRQ
374 def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
375 select MFD_SYSCON
376
377config LS_SCFG_MSI
378 def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
379 depends on PCI && PCI_MSI
380
381config PARTITION_PERCPU
382 bool
383
384config EZNPS_GIC
385 bool "NPS400 Global Interrupt Manager (GIM)"
386 depends on ARC || (COMPILE_TEST && !64BIT)
387 select IRQ_DOMAIN
388 help
389 Support the EZchip NPS400 global interrupt controller
390
391config STM32_EXTI
392 bool
393 select IRQ_DOMAIN
394 select GENERIC_IRQ_CHIP
395
396config QCOM_IRQ_COMBINER
397 bool "QCOM IRQ combiner support"
398 depends on ARCH_QCOM && ACPI
399 select IRQ_DOMAIN_HIERARCHY
400 help
401 Say yes here to add support for the IRQ combiner devices embedded
402 in Qualcomm Technologies chips.
403
404config IRQ_UNIPHIER_AIDET
405 bool "UniPhier AIDET support" if COMPILE_TEST
406 depends on ARCH_UNIPHIER || COMPILE_TEST
407 default ARCH_UNIPHIER
408 select IRQ_DOMAIN_HIERARCHY
409 help
410 Support for the UniPhier AIDET (ARM Interrupt Detector).
411
412config MESON_IRQ_GPIO
413 bool "Meson GPIO Interrupt Multiplexer"
414 depends on ARCH_MESON
415 select IRQ_DOMAIN_HIERARCHY
416 help
417 Support Meson SoC Family GPIO Interrupt Multiplexer
418
419config GOLDFISH_PIC
420 bool "Goldfish programmable interrupt controller"
421 depends on MIPS && (GOLDFISH || COMPILE_TEST)
422 select IRQ_DOMAIN
423 help
424 Say yes here to enable Goldfish interrupt controller driver used
425 for Goldfish based virtual platforms.
426
427config QCOM_PDC
428 bool "QCOM PDC"
429 depends on ARCH_QCOM
430 select IRQ_DOMAIN_HIERARCHY
431 help
432 Power Domain Controller driver to manage and configure wakeup
433 IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
434
435config CSKY_MPINTC
436 bool "C-SKY Multi Processor Interrupt Controller"
437 depends on CSKY
438 help
439 Say yes here to enable C-SKY SMP interrupt controller driver used
440 for C-SKY SMP system.
441 In fact it's not mmio map in hardware and it uses ld/st to visit the
442 controller's register inside CPU.
443
444config CSKY_APB_INTC
445 bool "C-SKY APB Interrupt Controller"
446 depends on CSKY
447 help
448 Say yes here to enable C-SKY APB interrupt controller driver used
449 by C-SKY single core SOC system. It uses mmio map apb-bus to visit
450 the controller's register.
451
452config IMX_IRQSTEER
453 bool "i.MX IRQSTEER support"
454 depends on ARCH_MXC || COMPILE_TEST
455 default ARCH_MXC
456 select IRQ_DOMAIN
457 help
458 Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
459
460config IMX_INTMUX
461 def_bool y if ARCH_MXC || COMPILE_TEST
462 select IRQ_DOMAIN
463 help
464 Support for the i.MX INTMUX interrupt multiplexer.
465
466config LS1X_IRQ
467 bool "Loongson-1 Interrupt Controller"
468 depends on MACH_LOONGSON32
469 default y
470 select IRQ_DOMAIN
471 select GENERIC_IRQ_CHIP
472 help
473 Support for the Loongson-1 platform Interrupt Controller.
474
475config TI_SCI_INTR_IRQCHIP
476 bool
477 depends on TI_SCI_PROTOCOL
478 select IRQ_DOMAIN_HIERARCHY
479 help
480 This enables the irqchip driver support for K3 Interrupt router
481 over TI System Control Interface available on some new TI's SoCs.
482 If you wish to use interrupt router irq resources managed by the
483 TI System Controller, say Y here. Otherwise, say N.
484
485config TI_SCI_INTA_IRQCHIP
486 bool
487 depends on TI_SCI_PROTOCOL
488 select IRQ_DOMAIN_HIERARCHY
489 select TI_SCI_INTA_MSI_DOMAIN
490 help
491 This enables the irqchip driver support for K3 Interrupt aggregator
492 over TI System Control Interface available on some new TI's SoCs.
493 If you wish to use interrupt aggregator irq resources managed by the
494 TI System Controller, say Y here. Otherwise, say N.
495
496config RISCV_INTC
497 bool "RISC-V Local Interrupt Controller"
498 depends on RISCV
499 default y
500 help
501 This enables support for the per-HART local interrupt controller
502 found in standard RISC-V systems. The per-HART local interrupt
503 controller handles timer interrupts, software interrupts, and
504 hardware interrupts. Without a per-HART local interrupt controller,
505 a RISC-V system will be unable to handle any interrupts.
506
507 If you don't know what to do here, say Y.
508
509config SIFIVE_PLIC
510 bool "SiFive Platform-Level Interrupt Controller"
511 depends on RISCV
512 select IRQ_DOMAIN_HIERARCHY
513 help
514 This enables support for the PLIC chip found in SiFive (and
515 potentially other) RISC-V systems. The PLIC controls devices
516 interrupts and connects them to each core's local interrupt
517 controller. Aside from timer and software interrupts, all other
518 interrupt sources are subordinate to the PLIC.
519
520 If you don't know what to do here, say Y.
521
522config EXYNOS_IRQ_COMBINER
523 bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
524 depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
525 help
526 Say yes here to add support for the IRQ combiner devices embedded
527 in Samsung Exynos chips.
528
529config LOONGSON_LIOINTC
530 bool "Loongson Local I/O Interrupt Controller"
531 depends on MACH_LOONGSON64
532 default y
533 select IRQ_DOMAIN
534 select GENERIC_IRQ_CHIP
535 help
536 Support for the Loongson Local I/O Interrupt Controller.
537
538config LOONGSON_HTPIC
539 bool "Loongson3 HyperTransport PIC Controller"
540 depends on MACH_LOONGSON64
541 default y
542 select IRQ_DOMAIN
543 select GENERIC_IRQ_CHIP
544 help
545 Support for the Loongson-3 HyperTransport PIC Controller.
546
547config LOONGSON_HTVEC
548 bool "Loongson3 HyperTransport Interrupt Vector Controller"
549 depends on MACH_LOONGSON64
550 default MACH_LOONGSON64
551 select IRQ_DOMAIN_HIERARCHY
552 help
553 Support for the Loongson3 HyperTransport Interrupt Vector Controller.
554
555config LOONGSON_PCH_PIC
556 bool "Loongson PCH PIC Controller"
557 depends on MACH_LOONGSON64 || COMPILE_TEST
558 default MACH_LOONGSON64
559 select IRQ_DOMAIN_HIERARCHY
560 select IRQ_FASTEOI_HIERARCHY_HANDLERS
561 help
562 Support for the Loongson PCH PIC Controller.
563
564config LOONGSON_PCH_MSI
565 bool "Loongson PCH MSI Controller"
566 depends on MACH_LOONGSON64 || COMPILE_TEST
567 depends on PCI
568 default MACH_LOONGSON64
569 select IRQ_DOMAIN_HIERARCHY
570 select PCI_MSI
571 help
572 Support for the Loongson PCH MSI Controller.
573
574endmenu