Linux Audio

Check our new training course

Loading...
v3.1
 
  1/*
  2 * Copyright 2009 Wolfson Microelectronics plc
  3 *
  4 * S3C64xx CPUfreq Support
  5 *
  6 * This program is free software; you can redistribute it and/or modify
  7 * it under the terms of the GNU General Public License version 2 as
  8 * published by the Free Software Foundation.
  9 */
 10
 
 
 11#include <linux/kernel.h>
 12#include <linux/types.h>
 13#include <linux/init.h>
 14#include <linux/cpufreq.h>
 15#include <linux/clk.h>
 16#include <linux/err.h>
 17#include <linux/regulator/consumer.h>
 
 18
 19static struct clk *armclk;
 20static struct regulator *vddarm;
 21static unsigned long regulator_latency;
 22
 23#ifdef CONFIG_CPU_S3C6410
 24struct s3c64xx_dvfs {
 25	unsigned int vddarm_min;
 26	unsigned int vddarm_max;
 27};
 28
 29static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
 30	[0] = { 1000000, 1150000 },
 31	[1] = { 1050000, 1150000 },
 32	[2] = { 1100000, 1150000 },
 33	[3] = { 1200000, 1350000 },
 34	[4] = { 1300000, 1350000 },
 35};
 36
 37static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 38	{ 0,  66000 },
 39	{ 0, 100000 },
 40	{ 0, 133000 },
 41	{ 1, 200000 },
 42	{ 1, 222000 },
 43	{ 1, 266000 },
 44	{ 2, 333000 },
 45	{ 2, 400000 },
 46	{ 2, 532000 },
 47	{ 2, 533000 },
 48	{ 3, 667000 },
 49	{ 4, 800000 },
 50	{ 0, CPUFREQ_TABLE_END },
 51};
 52#endif
 53
 54static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
 55{
 56	if (policy->cpu != 0)
 57		return -EINVAL;
 58
 59	return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
 60}
 61
 62static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
 63{
 64	if (cpu != 0)
 65		return 0;
 66
 67	return clk_get_rate(armclk) / 1000;
 68}
 69
 70static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 71				      unsigned int target_freq,
 72				      unsigned int relation)
 73{
 74	int ret;
 75	unsigned int i;
 76	struct cpufreq_freqs freqs;
 77	struct s3c64xx_dvfs *dvfs;
 
 
 78
 79	ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
 80					     target_freq, relation, &i);
 81	if (ret != 0)
 82		return ret;
 83
 84	freqs.cpu = 0;
 85	freqs.old = clk_get_rate(armclk) / 1000;
 86	freqs.new = s3c64xx_freq_table[i].frequency;
 87	freqs.flags = 0;
 88	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
 89
 90	if (freqs.old == freqs.new)
 91		return 0;
 92
 93	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
 94
 95	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 96
 97#ifdef CONFIG_REGULATOR
 98	if (vddarm && freqs.new > freqs.old) {
 99		ret = regulator_set_voltage(vddarm,
100					    dvfs->vddarm_min,
101					    dvfs->vddarm_max);
102		if (ret != 0) {
103			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
104			       freqs.new, ret);
105			goto err;
106		}
107	}
108#endif
109
110	ret = clk_set_rate(armclk, freqs.new * 1000);
111	if (ret < 0) {
112		pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
113		       freqs.new, ret);
114		goto err;
115	}
116
117	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
118
119#ifdef CONFIG_REGULATOR
120	if (vddarm && freqs.new < freqs.old) {
121		ret = regulator_set_voltage(vddarm,
122					    dvfs->vddarm_min,
123					    dvfs->vddarm_max);
124		if (ret != 0) {
125			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
126			       freqs.new, ret);
127			goto err_clk;
 
 
 
128		}
129	}
130#endif
131
132	pr_debug("cpufreq: Set actual frequency %lukHz\n",
133		 clk_get_rate(armclk) / 1000);
134
135	return 0;
136
137err_clk:
138	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
139		pr_err("Failed to restore original clock rate\n");
140err:
141	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
142
143	return ret;
144}
145
146#ifdef CONFIG_REGULATOR
147static void __init s3c64xx_cpufreq_config_regulator(void)
148{
149	int count, v, i, found;
150	struct cpufreq_frequency_table *freq;
151	struct s3c64xx_dvfs *dvfs;
152
153	count = regulator_count_voltages(vddarm);
154	if (count < 0) {
155		pr_err("cpufreq: Unable to check supported voltages\n");
156	}
157
158	freq = s3c64xx_freq_table;
159	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
160		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
161			continue;
162
163		dvfs = &s3c64xx_dvfs_table[freq->index];
 
164		found = 0;
165
166		for (i = 0; i < count; i++) {
167			v = regulator_list_voltage(vddarm, i);
168			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
169				found = 1;
170		}
171
172		if (!found) {
173			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
174				 freq->frequency);
175			freq->frequency = CPUFREQ_ENTRY_INVALID;
176		}
177
178		freq++;
179	}
180
 
181	/* Guess based on having to do an I2C/SPI write; in future we
182	 * will be able to query the regulator performance here. */
183	regulator_latency = 1 * 1000 * 1000;
184}
185#endif
186
187static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
188{
189	int ret;
190	struct cpufreq_frequency_table *freq;
191
192	if (policy->cpu != 0)
193		return -EINVAL;
194
195	if (s3c64xx_freq_table == NULL) {
196		pr_err("cpufreq: No frequency information for this CPU\n");
197		return -ENODEV;
198	}
199
200	armclk = clk_get(NULL, "armclk");
201	if (IS_ERR(armclk)) {
202		pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
203		       PTR_ERR(armclk));
204		return PTR_ERR(armclk);
205	}
206
207#ifdef CONFIG_REGULATOR
208	vddarm = regulator_get(NULL, "vddarm");
209	if (IS_ERR(vddarm)) {
210		ret = PTR_ERR(vddarm);
211		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
212		pr_err("cpufreq: Only frequency scaling available\n");
213		vddarm = NULL;
214	} else {
215		s3c64xx_cpufreq_config_regulator();
216	}
217#endif
218
219	freq = s3c64xx_freq_table;
220	while (freq->frequency != CPUFREQ_TABLE_END) {
221		unsigned long r;
222
223		/* Check for frequencies we can generate */
224		r = clk_round_rate(armclk, freq->frequency * 1000);
225		r /= 1000;
226		if (r != freq->frequency) {
227			pr_debug("cpufreq: %dkHz unsupported by clock\n",
228				 freq->frequency);
229			freq->frequency = CPUFREQ_ENTRY_INVALID;
230		}
231
232		/* If we have no regulator then assume startup
233		 * frequency is the maximum we can support. */
234		if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
235			freq->frequency = CPUFREQ_ENTRY_INVALID;
236
237		freq++;
238	}
239
240	policy->cur = clk_get_rate(armclk) / 1000;
241
242	/* Datasheet says PLL stabalisation time (if we were to use
243	 * the PLLs, which we don't currently) is ~300us worst case,
244	 * but add some fudge.
245	 */
246	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
247
248	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
249	if (ret != 0) {
250		pr_err("cpufreq: Failed to configure frequency table: %d\n",
251		       ret);
252		regulator_put(vddarm);
253		clk_put(armclk);
254	}
255
256	return ret;
257}
258
259static struct cpufreq_driver s3c64xx_cpufreq_driver = {
260	.owner		= THIS_MODULE,
261	.flags          = 0,
262	.verify		= s3c64xx_cpufreq_verify_speed,
263	.target		= s3c64xx_cpufreq_set_target,
264	.get		= s3c64xx_cpufreq_get_speed,
265	.init		= s3c64xx_cpufreq_driver_init,
266	.name		= "s3c",
267};
268
269static int __init s3c64xx_cpufreq_init(void)
270{
271	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
272}
273module_init(s3c64xx_cpufreq_init);
v5.9
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Copyright 2009 Wolfson Microelectronics plc
  4 *
  5 * S3C64xx CPUfreq Support
 
 
 
 
  6 */
  7
  8#define pr_fmt(fmt) "cpufreq: " fmt
  9
 10#include <linux/kernel.h>
 11#include <linux/types.h>
 12#include <linux/init.h>
 13#include <linux/cpufreq.h>
 14#include <linux/clk.h>
 15#include <linux/err.h>
 16#include <linux/regulator/consumer.h>
 17#include <linux/module.h>
 18
 
 19static struct regulator *vddarm;
 20static unsigned long regulator_latency;
 21
 
 22struct s3c64xx_dvfs {
 23	unsigned int vddarm_min;
 24	unsigned int vddarm_max;
 25};
 26
 27static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
 28	[0] = { 1000000, 1150000 },
 29	[1] = { 1050000, 1150000 },
 30	[2] = { 1100000, 1150000 },
 31	[3] = { 1200000, 1350000 },
 32	[4] = { 1300000, 1350000 },
 33};
 34
 35static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 36	{ 0, 0,  66000 },
 37	{ 0, 0, 100000 },
 38	{ 0, 0, 133000 },
 39	{ 0, 1, 200000 },
 40	{ 0, 1, 222000 },
 41	{ 0, 1, 266000 },
 42	{ 0, 2, 333000 },
 43	{ 0, 2, 400000 },
 44	{ 0, 2, 532000 },
 45	{ 0, 2, 533000 },
 46	{ 0, 3, 667000 },
 47	{ 0, 4, 800000 },
 48	{ 0, 0, CPUFREQ_TABLE_END },
 49};
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 50
 51static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 52				      unsigned int index)
 
 53{
 
 
 
 54	struct s3c64xx_dvfs *dvfs;
 55	unsigned int old_freq, new_freq;
 56	int ret;
 57
 58	old_freq = clk_get_rate(policy->clk) / 1000;
 59	new_freq = s3c64xx_freq_table[index].frequency;
 60	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 61
 62#ifdef CONFIG_REGULATOR
 63	if (vddarm && new_freq > old_freq) {
 64		ret = regulator_set_voltage(vddarm,
 65					    dvfs->vddarm_min,
 66					    dvfs->vddarm_max);
 67		if (ret != 0) {
 68			pr_err("Failed to set VDDARM for %dkHz: %d\n",
 69			       new_freq, ret);
 70			return ret;
 71		}
 72	}
 73#endif
 74
 75	ret = clk_set_rate(policy->clk, new_freq * 1000);
 76	if (ret < 0) {
 77		pr_err("Failed to set rate %dkHz: %d\n",
 78		       new_freq, ret);
 79		return ret;
 80	}
 81
 
 
 82#ifdef CONFIG_REGULATOR
 83	if (vddarm && new_freq < old_freq) {
 84		ret = regulator_set_voltage(vddarm,
 85					    dvfs->vddarm_min,
 86					    dvfs->vddarm_max);
 87		if (ret != 0) {
 88			pr_err("Failed to set VDDARM for %dkHz: %d\n",
 89			       new_freq, ret);
 90			if (clk_set_rate(policy->clk, old_freq * 1000) < 0)
 91				pr_err("Failed to restore original clock rate\n");
 92
 93			return ret;
 94		}
 95	}
 96#endif
 97
 98	pr_debug("Set actual frequency %lukHz\n",
 99		 clk_get_rate(policy->clk) / 1000);
100
101	return 0;
 
 
 
 
 
 
 
 
102}
103
104#ifdef CONFIG_REGULATOR
105static void s3c64xx_cpufreq_config_regulator(void)
106{
107	int count, v, i, found;
108	struct cpufreq_frequency_table *freq;
109	struct s3c64xx_dvfs *dvfs;
110
111	count = regulator_count_voltages(vddarm);
112	if (count < 0) {
113		pr_err("Unable to check supported voltages\n");
114	}
115
116	if (!count)
117		goto out;
 
 
118
119	cpufreq_for_each_valid_entry(freq, s3c64xx_freq_table) {
120		dvfs = &s3c64xx_dvfs_table[freq->driver_data];
121		found = 0;
122
123		for (i = 0; i < count; i++) {
124			v = regulator_list_voltage(vddarm, i);
125			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
126				found = 1;
127		}
128
129		if (!found) {
130			pr_debug("%dkHz unsupported by regulator\n",
131				 freq->frequency);
132			freq->frequency = CPUFREQ_ENTRY_INVALID;
133		}
 
 
134	}
135
136out:
137	/* Guess based on having to do an I2C/SPI write; in future we
138	 * will be able to query the regulator performance here. */
139	regulator_latency = 1 * 1000 * 1000;
140}
141#endif
142
143static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
144{
 
145	struct cpufreq_frequency_table *freq;
146
147	if (policy->cpu != 0)
148		return -EINVAL;
149
150	policy->clk = clk_get(NULL, "armclk");
151	if (IS_ERR(policy->clk)) {
152		pr_err("Unable to obtain ARMCLK: %ld\n",
153		       PTR_ERR(policy->clk));
154		return PTR_ERR(policy->clk);
 
 
 
 
 
155	}
156
157#ifdef CONFIG_REGULATOR
158	vddarm = regulator_get(NULL, "vddarm");
159	if (IS_ERR(vddarm)) {
160		pr_err("Failed to obtain VDDARM: %ld\n", PTR_ERR(vddarm));
161		pr_err("Only frequency scaling available\n");
 
162		vddarm = NULL;
163	} else {
164		s3c64xx_cpufreq_config_regulator();
165	}
166#endif
167
168	cpufreq_for_each_entry(freq, s3c64xx_freq_table) {
 
169		unsigned long r;
170
171		/* Check for frequencies we can generate */
172		r = clk_round_rate(policy->clk, freq->frequency * 1000);
173		r /= 1000;
174		if (r != freq->frequency) {
175			pr_debug("%dkHz unsupported by clock\n",
176				 freq->frequency);
177			freq->frequency = CPUFREQ_ENTRY_INVALID;
178		}
179
180		/* If we have no regulator then assume startup
181		 * frequency is the maximum we can support. */
182		if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000)
183			freq->frequency = CPUFREQ_ENTRY_INVALID;
 
 
184	}
185
 
 
186	/* Datasheet says PLL stabalisation time (if we were to use
187	 * the PLLs, which we don't currently) is ~300us worst case,
188	 * but add some fudge.
189	 */
190	cpufreq_generic_init(policy, s3c64xx_freq_table,
191			(500 * 1000) + regulator_latency);
192	return 0;
 
 
 
 
 
 
 
 
193}
194
195static struct cpufreq_driver s3c64xx_cpufreq_driver = {
196	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
197	.verify		= cpufreq_generic_frequency_table_verify,
198	.target_index	= s3c64xx_cpufreq_set_target,
199	.get		= cpufreq_generic_get,
 
200	.init		= s3c64xx_cpufreq_driver_init,
201	.name		= "s3c",
202};
203
204static int __init s3c64xx_cpufreq_init(void)
205{
206	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
207}
208module_init(s3c64xx_cpufreq_init);