Loading...
1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
15 *
16 */
17
18#include <linux/init.h>
19#include <linux/slab.h>
20#include <linux/usb.h>
21#include <linux/usb/audio.h>
22#include <linux/usb/audio-v2.h>
23
24#include <sound/core.h>
25#include <sound/pcm.h>
26
27#include "usbaudio.h"
28#include "card.h"
29#include "proc.h"
30#include "quirks.h"
31#include "endpoint.h"
32#include "urb.h"
33#include "pcm.h"
34#include "helper.h"
35#include "format.h"
36#include "clock.h"
37
38/*
39 * free a substream
40 */
41static void free_substream(struct snd_usb_substream *subs)
42{
43 struct list_head *p, *n;
44
45 if (!subs->num_formats)
46 return; /* not initialized */
47 list_for_each_safe(p, n, &subs->fmt_list) {
48 struct audioformat *fp = list_entry(p, struct audioformat, list);
49 kfree(fp->rate_table);
50 kfree(fp);
51 }
52 kfree(subs->rate_list.list);
53}
54
55
56/*
57 * free a usb stream instance
58 */
59static void snd_usb_audio_stream_free(struct snd_usb_stream *stream)
60{
61 free_substream(&stream->substream[0]);
62 free_substream(&stream->substream[1]);
63 list_del(&stream->list);
64 kfree(stream);
65}
66
67static void snd_usb_audio_pcm_free(struct snd_pcm *pcm)
68{
69 struct snd_usb_stream *stream = pcm->private_data;
70 if (stream) {
71 stream->pcm = NULL;
72 snd_usb_audio_stream_free(stream);
73 }
74}
75
76
77/*
78 * add this endpoint to the chip instance.
79 * if a stream with the same endpoint already exists, append to it.
80 * if not, create a new pcm stream.
81 */
82int snd_usb_add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct audioformat *fp)
83{
84 struct list_head *p;
85 struct snd_usb_stream *as;
86 struct snd_usb_substream *subs;
87 struct snd_pcm *pcm;
88 int err;
89
90 list_for_each(p, &chip->pcm_list) {
91 as = list_entry(p, struct snd_usb_stream, list);
92 if (as->fmt_type != fp->fmt_type)
93 continue;
94 subs = &as->substream[stream];
95 if (!subs->endpoint)
96 continue;
97 if (subs->endpoint == fp->endpoint) {
98 list_add_tail(&fp->list, &subs->fmt_list);
99 subs->num_formats++;
100 subs->formats |= fp->formats;
101 return 0;
102 }
103 }
104 /* look for an empty stream */
105 list_for_each(p, &chip->pcm_list) {
106 as = list_entry(p, struct snd_usb_stream, list);
107 if (as->fmt_type != fp->fmt_type)
108 continue;
109 subs = &as->substream[stream];
110 if (subs->endpoint)
111 continue;
112 err = snd_pcm_new_stream(as->pcm, stream, 1);
113 if (err < 0)
114 return err;
115 snd_usb_init_substream(as, stream, fp);
116 return 0;
117 }
118
119 /* create a new pcm */
120 as = kzalloc(sizeof(*as), GFP_KERNEL);
121 if (!as)
122 return -ENOMEM;
123 as->pcm_index = chip->pcm_devs;
124 as->chip = chip;
125 as->fmt_type = fp->fmt_type;
126 err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs,
127 stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0,
128 stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1,
129 &pcm);
130 if (err < 0) {
131 kfree(as);
132 return err;
133 }
134 as->pcm = pcm;
135 pcm->private_data = as;
136 pcm->private_free = snd_usb_audio_pcm_free;
137 pcm->info_flags = 0;
138 if (chip->pcm_devs > 0)
139 sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs);
140 else
141 strcpy(pcm->name, "USB Audio");
142
143 snd_usb_init_substream(as, stream, fp);
144
145 list_add(&as->list, &chip->pcm_list);
146 chip->pcm_devs++;
147
148 snd_usb_proc_pcm_format_add(as);
149
150 return 0;
151}
152
153static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
154 struct usb_host_interface *alts,
155 int protocol, int iface_no)
156{
157 /* parsed with a v1 header here. that's ok as we only look at the
158 * header first which is the same for both versions */
159 struct uac_iso_endpoint_descriptor *csep;
160 struct usb_interface_descriptor *altsd = get_iface_desc(alts);
161 int attributes = 0;
162
163 csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
164
165 /* Creamware Noah has this descriptor after the 2nd endpoint */
166 if (!csep && altsd->bNumEndpoints >= 2)
167 csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
168
169 if (!csep || csep->bLength < 7 ||
170 csep->bDescriptorSubtype != UAC_EP_GENERAL) {
171 snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
172 " class specific endpoint descriptor\n",
173 chip->dev->devnum, iface_no,
174 altsd->bAlternateSetting);
175 return 0;
176 }
177
178 if (protocol == UAC_VERSION_1) {
179 attributes = csep->bmAttributes;
180 } else {
181 struct uac2_iso_endpoint_descriptor *csep2 =
182 (struct uac2_iso_endpoint_descriptor *) csep;
183
184 attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX;
185
186 /* emulate the endpoint attributes of a v1 device */
187 if (csep2->bmControls & UAC2_CONTROL_PITCH)
188 attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL;
189 }
190
191 return attributes;
192}
193
194static struct uac2_input_terminal_descriptor *
195 snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
196 int terminal_id)
197{
198 struct uac2_input_terminal_descriptor *term = NULL;
199
200 while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
201 ctrl_iface->extralen,
202 term, UAC_INPUT_TERMINAL))) {
203 if (term->bTerminalID == terminal_id)
204 return term;
205 }
206
207 return NULL;
208}
209
210static struct uac2_output_terminal_descriptor *
211 snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
212 int terminal_id)
213{
214 struct uac2_output_terminal_descriptor *term = NULL;
215
216 while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
217 ctrl_iface->extralen,
218 term, UAC_OUTPUT_TERMINAL))) {
219 if (term->bTerminalID == terminal_id)
220 return term;
221 }
222
223 return NULL;
224}
225
226int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
227{
228 struct usb_device *dev;
229 struct usb_interface *iface;
230 struct usb_host_interface *alts;
231 struct usb_interface_descriptor *altsd;
232 int i, altno, err, stream;
233 int format = 0, num_channels = 0;
234 struct audioformat *fp = NULL;
235 int num, protocol, clock = 0;
236 struct uac_format_type_i_continuous_descriptor *fmt;
237
238 dev = chip->dev;
239
240 /* parse the interface's altsettings */
241 iface = usb_ifnum_to_if(dev, iface_no);
242
243 num = iface->num_altsetting;
244
245 /*
246 * Dallas DS4201 workaround: It presents 5 altsettings, but the last
247 * one misses syncpipe, and does not produce any sound.
248 */
249 if (chip->usb_id == USB_ID(0x04fa, 0x4201))
250 num = 4;
251
252 for (i = 0; i < num; i++) {
253 alts = &iface->altsetting[i];
254 altsd = get_iface_desc(alts);
255 protocol = altsd->bInterfaceProtocol;
256 /* skip invalid one */
257 if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
258 altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
259 (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
260 altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) ||
261 altsd->bNumEndpoints < 1 ||
262 le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
263 continue;
264 /* must be isochronous */
265 if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
266 USB_ENDPOINT_XFER_ISOC)
267 continue;
268 /* check direction */
269 stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ?
270 SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
271 altno = altsd->bAlternateSetting;
272
273 if (snd_usb_apply_interface_quirk(chip, iface_no, altno))
274 continue;
275
276 /* get audio formats */
277 switch (protocol) {
278 default:
279 snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
280 dev->devnum, iface_no, altno, protocol);
281 protocol = UAC_VERSION_1;
282 /* fall through */
283
284 case UAC_VERSION_1: {
285 struct uac1_as_header_descriptor *as =
286 snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
287
288 if (!as) {
289 snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
290 dev->devnum, iface_no, altno);
291 continue;
292 }
293
294 if (as->bLength < sizeof(*as)) {
295 snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
296 dev->devnum, iface_no, altno);
297 continue;
298 }
299
300 format = le16_to_cpu(as->wFormatTag); /* remember the format value */
301 break;
302 }
303
304 case UAC_VERSION_2: {
305 struct uac2_input_terminal_descriptor *input_term;
306 struct uac2_output_terminal_descriptor *output_term;
307 struct uac2_as_header_descriptor *as =
308 snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
309
310 if (!as) {
311 snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
312 dev->devnum, iface_no, altno);
313 continue;
314 }
315
316 if (as->bLength < sizeof(*as)) {
317 snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
318 dev->devnum, iface_no, altno);
319 continue;
320 }
321
322 num_channels = as->bNrChannels;
323 format = le32_to_cpu(as->bmFormats);
324
325 /* lookup the terminal associated to this interface
326 * to extract the clock */
327 input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
328 as->bTerminalLink);
329 if (input_term) {
330 clock = input_term->bCSourceID;
331 break;
332 }
333
334 output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
335 as->bTerminalLink);
336 if (output_term) {
337 clock = output_term->bCSourceID;
338 break;
339 }
340
341 snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
342 dev->devnum, iface_no, altno, as->bTerminalLink);
343 continue;
344 }
345 }
346
347 /* get format type */
348 fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
349 if (!fmt) {
350 snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
351 dev->devnum, iface_no, altno);
352 continue;
353 }
354 if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
355 ((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) {
356 snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
357 dev->devnum, iface_no, altno);
358 continue;
359 }
360
361 /*
362 * Blue Microphones workaround: The last altsetting is identical
363 * with the previous one, except for a larger packet size, but
364 * is actually a mislabeled two-channel setting; ignore it.
365 */
366 if (fmt->bNrChannels == 1 &&
367 fmt->bSubframeSize == 2 &&
368 altno == 2 && num == 3 &&
369 fp && fp->altsetting == 1 && fp->channels == 1 &&
370 fp->formats == SNDRV_PCM_FMTBIT_S16_LE &&
371 protocol == UAC_VERSION_1 &&
372 le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
373 fp->maxpacksize * 2)
374 continue;
375
376 fp = kzalloc(sizeof(*fp), GFP_KERNEL);
377 if (! fp) {
378 snd_printk(KERN_ERR "cannot malloc\n");
379 return -ENOMEM;
380 }
381
382 fp->iface = iface_no;
383 fp->altsetting = altno;
384 fp->altset_idx = i;
385 fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
386 fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
387 fp->datainterval = snd_usb_parse_datainterval(chip, alts);
388 fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
389 /* num_channels is only set for v2 interfaces */
390 fp->channels = num_channels;
391 if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
392 fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
393 * (fp->maxpacksize & 0x7ff);
394 fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
395 fp->clock = clock;
396
397 /* some quirks for attributes here */
398
399 switch (chip->usb_id) {
400 case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
401 /* Optoplay sets the sample rate attribute although
402 * it seems not supporting it in fact.
403 */
404 fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
405 break;
406 case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
407 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
408 /* doesn't set the sample rate attribute, but supports it */
409 fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
410 break;
411 case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
412 case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
413 case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
414 case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
415 an older model 77d:223) */
416 /*
417 * plantronics headset and Griffin iMic have set adaptive-in
418 * although it's really not...
419 */
420 fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
421 if (stream == SNDRV_PCM_STREAM_PLAYBACK)
422 fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
423 else
424 fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
425 break;
426 }
427
428 /* ok, let's parse further... */
429 if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
430 kfree(fp->rate_table);
431 kfree(fp);
432 fp = NULL;
433 continue;
434 }
435
436 snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
437 err = snd_usb_add_audio_endpoint(chip, stream, fp);
438 if (err < 0) {
439 kfree(fp->rate_table);
440 kfree(fp);
441 return err;
442 }
443 /* try to set the interface... */
444 usb_set_interface(chip->dev, iface_no, altno);
445 snd_usb_init_pitch(chip, iface_no, alts, fp);
446 snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max);
447 }
448 return 0;
449}
450
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 */
4
5#include <linux/gfp.h>
6#include <linux/init.h>
7#include <linux/ratelimit.h>
8#include <linux/usb.h>
9#include <linux/usb/audio.h>
10#include <linux/slab.h>
11
12#include <sound/core.h>
13#include <sound/pcm.h>
14#include <sound/pcm_params.h>
15
16#include "usbaudio.h"
17#include "helper.h"
18#include "card.h"
19#include "endpoint.h"
20#include "pcm.h"
21#include "quirks.h"
22
23#define EP_FLAG_RUNNING 1
24#define EP_FLAG_STOPPING 2
25
26/*
27 * snd_usb_endpoint is a model that abstracts everything related to an
28 * USB endpoint and its streaming.
29 *
30 * There are functions to activate and deactivate the streaming URBs and
31 * optional callbacks to let the pcm logic handle the actual content of the
32 * packets for playback and record. Thus, the bus streaming and the audio
33 * handlers are fully decoupled.
34 *
35 * There are two different types of endpoints in audio applications.
36 *
37 * SND_USB_ENDPOINT_TYPE_DATA handles full audio data payload for both
38 * inbound and outbound traffic.
39 *
40 * SND_USB_ENDPOINT_TYPE_SYNC endpoints are for inbound traffic only and
41 * expect the payload to carry Q10.14 / Q16.16 formatted sync information
42 * (3 or 4 bytes).
43 *
44 * Each endpoint has to be configured prior to being used by calling
45 * snd_usb_endpoint_set_params().
46 *
47 * The model incorporates a reference counting, so that multiple users
48 * can call snd_usb_endpoint_start() and snd_usb_endpoint_stop(), and
49 * only the first user will effectively start the URBs, and only the last
50 * one to stop it will tear the URBs down again.
51 */
52
53/*
54 * convert a sampling rate into our full speed format (fs/1000 in Q16.16)
55 * this will overflow at approx 524 kHz
56 */
57static inline unsigned get_usb_full_speed_rate(unsigned int rate)
58{
59 return ((rate << 13) + 62) / 125;
60}
61
62/*
63 * convert a sampling rate into USB high speed format (fs/8000 in Q16.16)
64 * this will overflow at approx 4 MHz
65 */
66static inline unsigned get_usb_high_speed_rate(unsigned int rate)
67{
68 return ((rate << 10) + 62) / 125;
69}
70
71/*
72 * release a urb data
73 */
74static void release_urb_ctx(struct snd_urb_ctx *u)
75{
76 if (u->buffer_size)
77 usb_free_coherent(u->ep->chip->dev, u->buffer_size,
78 u->urb->transfer_buffer,
79 u->urb->transfer_dma);
80 usb_free_urb(u->urb);
81 u->urb = NULL;
82}
83
84static const char *usb_error_string(int err)
85{
86 switch (err) {
87 case -ENODEV:
88 return "no device";
89 case -ENOENT:
90 return "endpoint not enabled";
91 case -EPIPE:
92 return "endpoint stalled";
93 case -ENOSPC:
94 return "not enough bandwidth";
95 case -ESHUTDOWN:
96 return "device disabled";
97 case -EHOSTUNREACH:
98 return "device suspended";
99 case -EINVAL:
100 case -EAGAIN:
101 case -EFBIG:
102 case -EMSGSIZE:
103 return "internal error";
104 default:
105 return "unknown error";
106 }
107}
108
109/**
110 * snd_usb_endpoint_implicit_feedback_sink: Report endpoint usage type
111 *
112 * @ep: The snd_usb_endpoint
113 *
114 * Determine whether an endpoint is driven by an implicit feedback
115 * data endpoint source.
116 */
117int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep)
118{
119 return ep->sync_master &&
120 ep->sync_master->type == SND_USB_ENDPOINT_TYPE_DATA &&
121 ep->type == SND_USB_ENDPOINT_TYPE_DATA &&
122 usb_pipeout(ep->pipe);
123}
124
125/*
126 * For streaming based on information derived from sync endpoints,
127 * prepare_outbound_urb_sizes() will call next_packet_size() to
128 * determine the number of samples to be sent in the next packet.
129 *
130 * For implicit feedback, next_packet_size() is unused.
131 */
132int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
133{
134 unsigned long flags;
135 int ret;
136
137 if (ep->fill_max)
138 return ep->maxframesize;
139
140 spin_lock_irqsave(&ep->lock, flags);
141 ep->phase = (ep->phase & 0xffff)
142 + (ep->freqm << ep->datainterval);
143 ret = min(ep->phase >> 16, ep->maxframesize);
144 spin_unlock_irqrestore(&ep->lock, flags);
145
146 return ret;
147}
148
149static void retire_outbound_urb(struct snd_usb_endpoint *ep,
150 struct snd_urb_ctx *urb_ctx)
151{
152 if (ep->retire_data_urb)
153 ep->retire_data_urb(ep->data_subs, urb_ctx->urb);
154}
155
156static void retire_inbound_urb(struct snd_usb_endpoint *ep,
157 struct snd_urb_ctx *urb_ctx)
158{
159 struct urb *urb = urb_ctx->urb;
160
161 if (unlikely(ep->skip_packets > 0)) {
162 ep->skip_packets--;
163 return;
164 }
165
166 if (ep->sync_slave)
167 snd_usb_handle_sync_urb(ep->sync_slave, ep, urb);
168
169 if (ep->retire_data_urb)
170 ep->retire_data_urb(ep->data_subs, urb);
171}
172
173static void prepare_silent_urb(struct snd_usb_endpoint *ep,
174 struct snd_urb_ctx *ctx)
175{
176 struct urb *urb = ctx->urb;
177 unsigned int offs = 0;
178 unsigned int extra = 0;
179 __le32 packet_length;
180 int i;
181
182 /* For tx_length_quirk, put packet length at start of packet */
183 if (ep->chip->tx_length_quirk)
184 extra = sizeof(packet_length);
185
186 for (i = 0; i < ctx->packets; ++i) {
187 unsigned int offset;
188 unsigned int length;
189 int counts;
190
191 if (ctx->packet_size[i])
192 counts = ctx->packet_size[i];
193 else
194 counts = snd_usb_endpoint_next_packet_size(ep);
195
196 length = counts * ep->stride; /* number of silent bytes */
197 offset = offs * ep->stride + extra * i;
198 urb->iso_frame_desc[i].offset = offset;
199 urb->iso_frame_desc[i].length = length + extra;
200 if (extra) {
201 packet_length = cpu_to_le32(length);
202 memcpy(urb->transfer_buffer + offset,
203 &packet_length, sizeof(packet_length));
204 }
205 memset(urb->transfer_buffer + offset + extra,
206 ep->silence_value, length);
207 offs += counts;
208 }
209
210 urb->number_of_packets = ctx->packets;
211 urb->transfer_buffer_length = offs * ep->stride + ctx->packets * extra;
212}
213
214/*
215 * Prepare a PLAYBACK urb for submission to the bus.
216 */
217static void prepare_outbound_urb(struct snd_usb_endpoint *ep,
218 struct snd_urb_ctx *ctx)
219{
220 struct urb *urb = ctx->urb;
221 unsigned char *cp = urb->transfer_buffer;
222
223 urb->dev = ep->chip->dev; /* we need to set this at each time */
224
225 switch (ep->type) {
226 case SND_USB_ENDPOINT_TYPE_DATA:
227 if (ep->prepare_data_urb) {
228 ep->prepare_data_urb(ep->data_subs, urb);
229 } else {
230 /* no data provider, so send silence */
231 prepare_silent_urb(ep, ctx);
232 }
233 break;
234
235 case SND_USB_ENDPOINT_TYPE_SYNC:
236 if (snd_usb_get_speed(ep->chip->dev) >= USB_SPEED_HIGH) {
237 /*
238 * fill the length and offset of each urb descriptor.
239 * the fixed 12.13 frequency is passed as 16.16 through the pipe.
240 */
241 urb->iso_frame_desc[0].length = 4;
242 urb->iso_frame_desc[0].offset = 0;
243 cp[0] = ep->freqn;
244 cp[1] = ep->freqn >> 8;
245 cp[2] = ep->freqn >> 16;
246 cp[3] = ep->freqn >> 24;
247 } else {
248 /*
249 * fill the length and offset of each urb descriptor.
250 * the fixed 10.14 frequency is passed through the pipe.
251 */
252 urb->iso_frame_desc[0].length = 3;
253 urb->iso_frame_desc[0].offset = 0;
254 cp[0] = ep->freqn >> 2;
255 cp[1] = ep->freqn >> 10;
256 cp[2] = ep->freqn >> 18;
257 }
258
259 break;
260 }
261}
262
263/*
264 * Prepare a CAPTURE or SYNC urb for submission to the bus.
265 */
266static inline void prepare_inbound_urb(struct snd_usb_endpoint *ep,
267 struct snd_urb_ctx *urb_ctx)
268{
269 int i, offs;
270 struct urb *urb = urb_ctx->urb;
271
272 urb->dev = ep->chip->dev; /* we need to set this at each time */
273
274 switch (ep->type) {
275 case SND_USB_ENDPOINT_TYPE_DATA:
276 offs = 0;
277 for (i = 0; i < urb_ctx->packets; i++) {
278 urb->iso_frame_desc[i].offset = offs;
279 urb->iso_frame_desc[i].length = ep->curpacksize;
280 offs += ep->curpacksize;
281 }
282
283 urb->transfer_buffer_length = offs;
284 urb->number_of_packets = urb_ctx->packets;
285 break;
286
287 case SND_USB_ENDPOINT_TYPE_SYNC:
288 urb->iso_frame_desc[0].length = min(4u, ep->syncmaxsize);
289 urb->iso_frame_desc[0].offset = 0;
290 break;
291 }
292}
293
294/*
295 * Send output urbs that have been prepared previously. URBs are dequeued
296 * from ep->ready_playback_urbs and in case there there aren't any available
297 * or there are no packets that have been prepared, this function does
298 * nothing.
299 *
300 * The reason why the functionality of sending and preparing URBs is separated
301 * is that host controllers don't guarantee the order in which they return
302 * inbound and outbound packets to their submitters.
303 *
304 * This function is only used for implicit feedback endpoints. For endpoints
305 * driven by dedicated sync endpoints, URBs are immediately re-submitted
306 * from their completion handler.
307 */
308static void queue_pending_output_urbs(struct snd_usb_endpoint *ep)
309{
310 while (test_bit(EP_FLAG_RUNNING, &ep->flags)) {
311
312 unsigned long flags;
313 struct snd_usb_packet_info *uninitialized_var(packet);
314 struct snd_urb_ctx *ctx = NULL;
315 int err, i;
316
317 spin_lock_irqsave(&ep->lock, flags);
318 if (ep->next_packet_read_pos != ep->next_packet_write_pos) {
319 packet = ep->next_packet + ep->next_packet_read_pos;
320 ep->next_packet_read_pos++;
321 ep->next_packet_read_pos %= MAX_URBS;
322
323 /* take URB out of FIFO */
324 if (!list_empty(&ep->ready_playback_urbs))
325 ctx = list_first_entry(&ep->ready_playback_urbs,
326 struct snd_urb_ctx, ready_list);
327 }
328 spin_unlock_irqrestore(&ep->lock, flags);
329
330 if (ctx == NULL)
331 return;
332
333 list_del_init(&ctx->ready_list);
334
335 /* copy over the length information */
336 for (i = 0; i < packet->packets; i++)
337 ctx->packet_size[i] = packet->packet_size[i];
338
339 /* call the data handler to fill in playback data */
340 prepare_outbound_urb(ep, ctx);
341
342 err = usb_submit_urb(ctx->urb, GFP_ATOMIC);
343 if (err < 0)
344 usb_audio_err(ep->chip,
345 "Unable to submit urb #%d: %d (urb %p)\n",
346 ctx->index, err, ctx->urb);
347 else
348 set_bit(ctx->index, &ep->active_mask);
349 }
350}
351
352/*
353 * complete callback for urbs
354 */
355static void snd_complete_urb(struct urb *urb)
356{
357 struct snd_urb_ctx *ctx = urb->context;
358 struct snd_usb_endpoint *ep = ctx->ep;
359 struct snd_pcm_substream *substream;
360 unsigned long flags;
361 int err;
362
363 if (unlikely(urb->status == -ENOENT || /* unlinked */
364 urb->status == -ENODEV || /* device removed */
365 urb->status == -ECONNRESET || /* unlinked */
366 urb->status == -ESHUTDOWN)) /* device disabled */
367 goto exit_clear;
368 /* device disconnected */
369 if (unlikely(atomic_read(&ep->chip->shutdown)))
370 goto exit_clear;
371
372 if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
373 goto exit_clear;
374
375 if (usb_pipeout(ep->pipe)) {
376 retire_outbound_urb(ep, ctx);
377 /* can be stopped during retire callback */
378 if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
379 goto exit_clear;
380
381 if (snd_usb_endpoint_implicit_feedback_sink(ep)) {
382 spin_lock_irqsave(&ep->lock, flags);
383 list_add_tail(&ctx->ready_list, &ep->ready_playback_urbs);
384 spin_unlock_irqrestore(&ep->lock, flags);
385 queue_pending_output_urbs(ep);
386
387 goto exit_clear;
388 }
389
390 prepare_outbound_urb(ep, ctx);
391 /* can be stopped during prepare callback */
392 if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
393 goto exit_clear;
394 } else {
395 retire_inbound_urb(ep, ctx);
396 /* can be stopped during retire callback */
397 if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
398 goto exit_clear;
399
400 prepare_inbound_urb(ep, ctx);
401 }
402
403 err = usb_submit_urb(urb, GFP_ATOMIC);
404 if (err == 0)
405 return;
406
407 usb_audio_err(ep->chip, "cannot submit urb (err = %d)\n", err);
408 if (ep->data_subs && ep->data_subs->pcm_substream) {
409 substream = ep->data_subs->pcm_substream;
410 snd_pcm_stop_xrun(substream);
411 }
412
413exit_clear:
414 clear_bit(ctx->index, &ep->active_mask);
415}
416
417/**
418 * snd_usb_add_endpoint: Add an endpoint to an USB audio chip
419 *
420 * @chip: The chip
421 * @alts: The USB host interface
422 * @ep_num: The number of the endpoint to use
423 * @direction: SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE
424 * @type: SND_USB_ENDPOINT_TYPE_DATA or SND_USB_ENDPOINT_TYPE_SYNC
425 *
426 * If the requested endpoint has not been added to the given chip before,
427 * a new instance is created. Otherwise, a pointer to the previoulsy
428 * created instance is returned. In case of any error, NULL is returned.
429 *
430 * New endpoints will be added to chip->ep_list and must be freed by
431 * calling snd_usb_endpoint_free().
432 *
433 * For SND_USB_ENDPOINT_TYPE_SYNC, the caller needs to guarantee that
434 * bNumEndpoints > 1 beforehand.
435 */
436struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
437 struct usb_host_interface *alts,
438 int ep_num, int direction, int type)
439{
440 struct snd_usb_endpoint *ep;
441 int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
442
443 if (WARN_ON(!alts))
444 return NULL;
445
446 mutex_lock(&chip->mutex);
447
448 list_for_each_entry(ep, &chip->ep_list, list) {
449 if (ep->ep_num == ep_num &&
450 ep->iface == alts->desc.bInterfaceNumber &&
451 ep->altsetting == alts->desc.bAlternateSetting) {
452 usb_audio_dbg(ep->chip,
453 "Re-using EP %x in iface %d,%d @%p\n",
454 ep_num, ep->iface, ep->altsetting, ep);
455 goto __exit_unlock;
456 }
457 }
458
459 usb_audio_dbg(chip, "Creating new %s %s endpoint #%x\n",
460 is_playback ? "playback" : "capture",
461 type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
462 ep_num);
463
464 ep = kzalloc(sizeof(*ep), GFP_KERNEL);
465 if (!ep)
466 goto __exit_unlock;
467
468 ep->chip = chip;
469 spin_lock_init(&ep->lock);
470 ep->type = type;
471 ep->ep_num = ep_num;
472 ep->iface = alts->desc.bInterfaceNumber;
473 ep->altsetting = alts->desc.bAlternateSetting;
474 INIT_LIST_HEAD(&ep->ready_playback_urbs);
475 ep_num &= USB_ENDPOINT_NUMBER_MASK;
476
477 if (is_playback)
478 ep->pipe = usb_sndisocpipe(chip->dev, ep_num);
479 else
480 ep->pipe = usb_rcvisocpipe(chip->dev, ep_num);
481
482 if (type == SND_USB_ENDPOINT_TYPE_SYNC) {
483 if (get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
484 get_endpoint(alts, 1)->bRefresh >= 1 &&
485 get_endpoint(alts, 1)->bRefresh <= 9)
486 ep->syncinterval = get_endpoint(alts, 1)->bRefresh;
487 else if (snd_usb_get_speed(chip->dev) == USB_SPEED_FULL)
488 ep->syncinterval = 1;
489 else if (get_endpoint(alts, 1)->bInterval >= 1 &&
490 get_endpoint(alts, 1)->bInterval <= 16)
491 ep->syncinterval = get_endpoint(alts, 1)->bInterval - 1;
492 else
493 ep->syncinterval = 3;
494
495 ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize);
496 }
497
498 list_add_tail(&ep->list, &chip->ep_list);
499
500__exit_unlock:
501 mutex_unlock(&chip->mutex);
502
503 return ep;
504}
505
506/*
507 * wait until all urbs are processed.
508 */
509static int wait_clear_urbs(struct snd_usb_endpoint *ep)
510{
511 unsigned long end_time = jiffies + msecs_to_jiffies(1000);
512 int alive;
513
514 do {
515 alive = bitmap_weight(&ep->active_mask, ep->nurbs);
516 if (!alive)
517 break;
518
519 schedule_timeout_uninterruptible(1);
520 } while (time_before(jiffies, end_time));
521
522 if (alive)
523 usb_audio_err(ep->chip,
524 "timeout: still %d active urbs on EP #%x\n",
525 alive, ep->ep_num);
526 clear_bit(EP_FLAG_STOPPING, &ep->flags);
527
528 ep->data_subs = NULL;
529 ep->sync_slave = NULL;
530 ep->retire_data_urb = NULL;
531 ep->prepare_data_urb = NULL;
532
533 return 0;
534}
535
536/* sync the pending stop operation;
537 * this function itself doesn't trigger the stop operation
538 */
539void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep)
540{
541 if (ep && test_bit(EP_FLAG_STOPPING, &ep->flags))
542 wait_clear_urbs(ep);
543}
544
545/*
546 * unlink active urbs.
547 */
548static int deactivate_urbs(struct snd_usb_endpoint *ep, bool force)
549{
550 unsigned int i;
551
552 if (!force && atomic_read(&ep->chip->shutdown)) /* to be sure... */
553 return -EBADFD;
554
555 clear_bit(EP_FLAG_RUNNING, &ep->flags);
556
557 INIT_LIST_HEAD(&ep->ready_playback_urbs);
558 ep->next_packet_read_pos = 0;
559 ep->next_packet_write_pos = 0;
560
561 for (i = 0; i < ep->nurbs; i++) {
562 if (test_bit(i, &ep->active_mask)) {
563 if (!test_and_set_bit(i, &ep->unlink_mask)) {
564 struct urb *u = ep->urb[i].urb;
565 usb_unlink_urb(u);
566 }
567 }
568 }
569
570 return 0;
571}
572
573/*
574 * release an endpoint's urbs
575 */
576static void release_urbs(struct snd_usb_endpoint *ep, int force)
577{
578 int i;
579
580 /* route incoming urbs to nirvana */
581 ep->retire_data_urb = NULL;
582 ep->prepare_data_urb = NULL;
583
584 /* stop urbs */
585 deactivate_urbs(ep, force);
586 wait_clear_urbs(ep);
587
588 for (i = 0; i < ep->nurbs; i++)
589 release_urb_ctx(&ep->urb[i]);
590
591 if (ep->syncbuf)
592 usb_free_coherent(ep->chip->dev, SYNC_URBS * 4,
593 ep->syncbuf, ep->sync_dma);
594
595 ep->syncbuf = NULL;
596 ep->nurbs = 0;
597}
598
599/*
600 * configure a data endpoint
601 */
602static int data_ep_set_params(struct snd_usb_endpoint *ep,
603 snd_pcm_format_t pcm_format,
604 unsigned int channels,
605 unsigned int period_bytes,
606 unsigned int frames_per_period,
607 unsigned int periods_per_buffer,
608 struct audioformat *fmt,
609 struct snd_usb_endpoint *sync_ep)
610{
611 unsigned int maxsize, minsize, packs_per_ms, max_packs_per_urb;
612 unsigned int max_packs_per_period, urbs_per_period, urb_packs;
613 unsigned int max_urbs, i;
614 int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels;
615 int tx_length_quirk = (ep->chip->tx_length_quirk &&
616 usb_pipeout(ep->pipe));
617
618 if (pcm_format == SNDRV_PCM_FORMAT_DSD_U16_LE && fmt->dsd_dop) {
619 /*
620 * When operating in DSD DOP mode, the size of a sample frame
621 * in hardware differs from the actual physical format width
622 * because we need to make room for the DOP markers.
623 */
624 frame_bits += channels << 3;
625 }
626
627 ep->datainterval = fmt->datainterval;
628 ep->stride = frame_bits >> 3;
629
630 switch (pcm_format) {
631 case SNDRV_PCM_FORMAT_U8:
632 ep->silence_value = 0x80;
633 break;
634 case SNDRV_PCM_FORMAT_DSD_U8:
635 case SNDRV_PCM_FORMAT_DSD_U16_LE:
636 case SNDRV_PCM_FORMAT_DSD_U32_LE:
637 case SNDRV_PCM_FORMAT_DSD_U16_BE:
638 case SNDRV_PCM_FORMAT_DSD_U32_BE:
639 ep->silence_value = 0x69;
640 break;
641 default:
642 ep->silence_value = 0;
643 }
644
645 /* assume max. frequency is 50% higher than nominal */
646 ep->freqmax = ep->freqn + (ep->freqn >> 1);
647 /* Round up freqmax to nearest integer in order to calculate maximum
648 * packet size, which must represent a whole number of frames.
649 * This is accomplished by adding 0x0.ffff before converting the
650 * Q16.16 format into integer.
651 * In order to accurately calculate the maximum packet size when
652 * the data interval is more than 1 (i.e. ep->datainterval > 0),
653 * multiply by the data interval prior to rounding. For instance,
654 * a freqmax of 41 kHz will result in a max packet size of 6 (5.125)
655 * frames with a data interval of 1, but 11 (10.25) frames with a
656 * data interval of 2.
657 * (ep->freqmax << ep->datainterval overflows at 8.192 MHz for the
658 * maximum datainterval value of 3, at USB full speed, higher for
659 * USB high speed, noting that ep->freqmax is in units of
660 * frames per packet in Q16.16 format.)
661 */
662 maxsize = (((ep->freqmax << ep->datainterval) + 0xffff) >> 16) *
663 (frame_bits >> 3);
664 if (tx_length_quirk)
665 maxsize += sizeof(__le32); /* Space for length descriptor */
666 /* but wMaxPacketSize might reduce this */
667 if (ep->maxpacksize && ep->maxpacksize < maxsize) {
668 /* whatever fits into a max. size packet */
669 unsigned int data_maxsize = maxsize = ep->maxpacksize;
670
671 if (tx_length_quirk)
672 /* Need to remove the length descriptor to calc freq */
673 data_maxsize -= sizeof(__le32);
674 ep->freqmax = (data_maxsize / (frame_bits >> 3))
675 << (16 - ep->datainterval);
676 }
677
678 if (ep->fill_max)
679 ep->curpacksize = ep->maxpacksize;
680 else
681 ep->curpacksize = maxsize;
682
683 if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL) {
684 packs_per_ms = 8 >> ep->datainterval;
685 max_packs_per_urb = MAX_PACKS_HS;
686 } else {
687 packs_per_ms = 1;
688 max_packs_per_urb = MAX_PACKS;
689 }
690 if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep))
691 max_packs_per_urb = min(max_packs_per_urb,
692 1U << sync_ep->syncinterval);
693 max_packs_per_urb = max(1u, max_packs_per_urb >> ep->datainterval);
694
695 /*
696 * Capture endpoints need to use small URBs because there's no way
697 * to tell in advance where the next period will end, and we don't
698 * want the next URB to complete much after the period ends.
699 *
700 * Playback endpoints with implicit sync much use the same parameters
701 * as their corresponding capture endpoint.
702 */
703 if (usb_pipein(ep->pipe) ||
704 snd_usb_endpoint_implicit_feedback_sink(ep)) {
705
706 urb_packs = packs_per_ms;
707 /*
708 * Wireless devices can poll at a max rate of once per 4ms.
709 * For dataintervals less than 5, increase the packet count to
710 * allow the host controller to use bursting to fill in the
711 * gaps.
712 */
713 if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) {
714 int interval = ep->datainterval;
715 while (interval < 5) {
716 urb_packs <<= 1;
717 ++interval;
718 }
719 }
720 /* make capture URBs <= 1 ms and smaller than a period */
721 urb_packs = min(max_packs_per_urb, urb_packs);
722 while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
723 urb_packs >>= 1;
724 ep->nurbs = MAX_URBS;
725
726 /*
727 * Playback endpoints without implicit sync are adjusted so that
728 * a period fits as evenly as possible in the smallest number of
729 * URBs. The total number of URBs is adjusted to the size of the
730 * ALSA buffer, subject to the MAX_URBS and MAX_QUEUE limits.
731 */
732 } else {
733 /* determine how small a packet can be */
734 minsize = (ep->freqn >> (16 - ep->datainterval)) *
735 (frame_bits >> 3);
736 /* with sync from device, assume it can be 12% lower */
737 if (sync_ep)
738 minsize -= minsize >> 3;
739 minsize = max(minsize, 1u);
740
741 /* how many packets will contain an entire ALSA period? */
742 max_packs_per_period = DIV_ROUND_UP(period_bytes, minsize);
743
744 /* how many URBs will contain a period? */
745 urbs_per_period = DIV_ROUND_UP(max_packs_per_period,
746 max_packs_per_urb);
747 /* how many packets are needed in each URB? */
748 urb_packs = DIV_ROUND_UP(max_packs_per_period, urbs_per_period);
749
750 /* limit the number of frames in a single URB */
751 ep->max_urb_frames = DIV_ROUND_UP(frames_per_period,
752 urbs_per_period);
753
754 /* try to use enough URBs to contain an entire ALSA buffer */
755 max_urbs = min((unsigned) MAX_URBS,
756 MAX_QUEUE * packs_per_ms / urb_packs);
757 ep->nurbs = min(max_urbs, urbs_per_period * periods_per_buffer);
758 }
759
760 /* allocate and initialize data urbs */
761 for (i = 0; i < ep->nurbs; i++) {
762 struct snd_urb_ctx *u = &ep->urb[i];
763 u->index = i;
764 u->ep = ep;
765 u->packets = urb_packs;
766 u->buffer_size = maxsize * u->packets;
767
768 if (fmt->fmt_type == UAC_FORMAT_TYPE_II)
769 u->packets++; /* for transfer delimiter */
770 u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
771 if (!u->urb)
772 goto out_of_memory;
773
774 u->urb->transfer_buffer =
775 usb_alloc_coherent(ep->chip->dev, u->buffer_size,
776 GFP_KERNEL, &u->urb->transfer_dma);
777 if (!u->urb->transfer_buffer)
778 goto out_of_memory;
779 u->urb->pipe = ep->pipe;
780 u->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
781 u->urb->interval = 1 << ep->datainterval;
782 u->urb->context = u;
783 u->urb->complete = snd_complete_urb;
784 INIT_LIST_HEAD(&u->ready_list);
785 }
786
787 return 0;
788
789out_of_memory:
790 release_urbs(ep, 0);
791 return -ENOMEM;
792}
793
794/*
795 * configure a sync endpoint
796 */
797static int sync_ep_set_params(struct snd_usb_endpoint *ep)
798{
799 int i;
800
801 ep->syncbuf = usb_alloc_coherent(ep->chip->dev, SYNC_URBS * 4,
802 GFP_KERNEL, &ep->sync_dma);
803 if (!ep->syncbuf)
804 return -ENOMEM;
805
806 for (i = 0; i < SYNC_URBS; i++) {
807 struct snd_urb_ctx *u = &ep->urb[i];
808 u->index = i;
809 u->ep = ep;
810 u->packets = 1;
811 u->urb = usb_alloc_urb(1, GFP_KERNEL);
812 if (!u->urb)
813 goto out_of_memory;
814 u->urb->transfer_buffer = ep->syncbuf + i * 4;
815 u->urb->transfer_dma = ep->sync_dma + i * 4;
816 u->urb->transfer_buffer_length = 4;
817 u->urb->pipe = ep->pipe;
818 u->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
819 u->urb->number_of_packets = 1;
820 u->urb->interval = 1 << ep->syncinterval;
821 u->urb->context = u;
822 u->urb->complete = snd_complete_urb;
823 }
824
825 ep->nurbs = SYNC_URBS;
826
827 return 0;
828
829out_of_memory:
830 release_urbs(ep, 0);
831 return -ENOMEM;
832}
833
834/**
835 * snd_usb_endpoint_set_params: configure an snd_usb_endpoint
836 *
837 * @ep: the snd_usb_endpoint to configure
838 * @pcm_format: the audio fomat.
839 * @channels: the number of audio channels.
840 * @period_bytes: the number of bytes in one alsa period.
841 * @period_frames: the number of frames in one alsa period.
842 * @buffer_periods: the number of periods in one alsa buffer.
843 * @rate: the frame rate.
844 * @fmt: the USB audio format information
845 * @sync_ep: the sync endpoint to use, if any
846 *
847 * Determine the number of URBs to be used on this endpoint.
848 * An endpoint must be configured before it can be started.
849 * An endpoint that is already running can not be reconfigured.
850 */
851int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
852 snd_pcm_format_t pcm_format,
853 unsigned int channels,
854 unsigned int period_bytes,
855 unsigned int period_frames,
856 unsigned int buffer_periods,
857 unsigned int rate,
858 struct audioformat *fmt,
859 struct snd_usb_endpoint *sync_ep)
860{
861 int err;
862
863 if (ep->use_count != 0) {
864 usb_audio_warn(ep->chip,
865 "Unable to change format on ep #%x: already in use\n",
866 ep->ep_num);
867 return -EBUSY;
868 }
869
870 /* release old buffers, if any */
871 release_urbs(ep, 0);
872
873 ep->datainterval = fmt->datainterval;
874 ep->maxpacksize = fmt->maxpacksize;
875 ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
876
877 if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
878 ep->freqn = get_usb_full_speed_rate(rate);
879 else
880 ep->freqn = get_usb_high_speed_rate(rate);
881
882 /* calculate the frequency in 16.16 format */
883 ep->freqm = ep->freqn;
884 ep->freqshift = INT_MIN;
885
886 ep->phase = 0;
887
888 switch (ep->type) {
889 case SND_USB_ENDPOINT_TYPE_DATA:
890 err = data_ep_set_params(ep, pcm_format, channels,
891 period_bytes, period_frames,
892 buffer_periods, fmt, sync_ep);
893 break;
894 case SND_USB_ENDPOINT_TYPE_SYNC:
895 err = sync_ep_set_params(ep);
896 break;
897 default:
898 err = -EINVAL;
899 }
900
901 usb_audio_dbg(ep->chip,
902 "Setting params for ep #%x (type %d, %d urbs), ret=%d\n",
903 ep->ep_num, ep->type, ep->nurbs, err);
904
905 return err;
906}
907
908/**
909 * snd_usb_endpoint_start: start an snd_usb_endpoint
910 *
911 * @ep: the endpoint to start
912 *
913 * A call to this function will increment the use count of the endpoint.
914 * In case it is not already running, the URBs for this endpoint will be
915 * submitted. Otherwise, this function does nothing.
916 *
917 * Must be balanced to calls of snd_usb_endpoint_stop().
918 *
919 * Returns an error if the URB submission failed, 0 in all other cases.
920 */
921int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
922{
923 int err;
924 unsigned int i;
925
926 if (atomic_read(&ep->chip->shutdown))
927 return -EBADFD;
928
929 /* already running? */
930 if (++ep->use_count != 1)
931 return 0;
932
933 /* just to be sure */
934 deactivate_urbs(ep, false);
935
936 ep->active_mask = 0;
937 ep->unlink_mask = 0;
938 ep->phase = 0;
939
940 snd_usb_endpoint_start_quirk(ep);
941
942 /*
943 * If this endpoint has a data endpoint as implicit feedback source,
944 * don't start the urbs here. Instead, mark them all as available,
945 * wait for the record urbs to return and queue the playback urbs
946 * from that context.
947 */
948
949 set_bit(EP_FLAG_RUNNING, &ep->flags);
950
951 if (snd_usb_endpoint_implicit_feedback_sink(ep)) {
952 for (i = 0; i < ep->nurbs; i++) {
953 struct snd_urb_ctx *ctx = ep->urb + i;
954 list_add_tail(&ctx->ready_list, &ep->ready_playback_urbs);
955 }
956
957 return 0;
958 }
959
960 for (i = 0; i < ep->nurbs; i++) {
961 struct urb *urb = ep->urb[i].urb;
962
963 if (snd_BUG_ON(!urb))
964 goto __error;
965
966 if (usb_pipeout(ep->pipe)) {
967 prepare_outbound_urb(ep, urb->context);
968 } else {
969 prepare_inbound_urb(ep, urb->context);
970 }
971
972 err = usb_submit_urb(urb, GFP_ATOMIC);
973 if (err < 0) {
974 usb_audio_err(ep->chip,
975 "cannot submit urb %d, error %d: %s\n",
976 i, err, usb_error_string(err));
977 goto __error;
978 }
979 set_bit(i, &ep->active_mask);
980 }
981
982 return 0;
983
984__error:
985 clear_bit(EP_FLAG_RUNNING, &ep->flags);
986 ep->use_count--;
987 deactivate_urbs(ep, false);
988 return -EPIPE;
989}
990
991/**
992 * snd_usb_endpoint_stop: stop an snd_usb_endpoint
993 *
994 * @ep: the endpoint to stop (may be NULL)
995 *
996 * A call to this function will decrement the use count of the endpoint.
997 * In case the last user has requested the endpoint stop, the URBs will
998 * actually be deactivated.
999 *
1000 * Must be balanced to calls of snd_usb_endpoint_start().
1001 *
1002 * The caller needs to synchronize the pending stop operation via
1003 * snd_usb_endpoint_sync_pending_stop().
1004 */
1005void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
1006{
1007 if (!ep)
1008 return;
1009
1010 if (snd_BUG_ON(ep->use_count == 0))
1011 return;
1012
1013 if (--ep->use_count == 0) {
1014 deactivate_urbs(ep, false);
1015 set_bit(EP_FLAG_STOPPING, &ep->flags);
1016 }
1017}
1018
1019/**
1020 * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
1021 *
1022 * @ep: the endpoint to deactivate
1023 *
1024 * If the endpoint is not currently in use, this functions will
1025 * deactivate its associated URBs.
1026 *
1027 * In case of any active users, this functions does nothing.
1028 */
1029void snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
1030{
1031 if (!ep)
1032 return;
1033
1034 if (ep->use_count != 0)
1035 return;
1036
1037 deactivate_urbs(ep, true);
1038 wait_clear_urbs(ep);
1039}
1040
1041/**
1042 * snd_usb_endpoint_release: Tear down an snd_usb_endpoint
1043 *
1044 * @ep: the endpoint to release
1045 *
1046 * This function does not care for the endpoint's use count but will tear
1047 * down all the streaming URBs immediately.
1048 */
1049void snd_usb_endpoint_release(struct snd_usb_endpoint *ep)
1050{
1051 release_urbs(ep, 1);
1052}
1053
1054/**
1055 * snd_usb_endpoint_free: Free the resources of an snd_usb_endpoint
1056 *
1057 * @ep: the endpoint to free
1058 *
1059 * This free all resources of the given ep.
1060 */
1061void snd_usb_endpoint_free(struct snd_usb_endpoint *ep)
1062{
1063 kfree(ep);
1064}
1065
1066/**
1067 * snd_usb_handle_sync_urb: parse an USB sync packet
1068 *
1069 * @ep: the endpoint to handle the packet
1070 * @sender: the sending endpoint
1071 * @urb: the received packet
1072 *
1073 * This function is called from the context of an endpoint that received
1074 * the packet and is used to let another endpoint object handle the payload.
1075 */
1076void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
1077 struct snd_usb_endpoint *sender,
1078 const struct urb *urb)
1079{
1080 int shift;
1081 unsigned int f;
1082 unsigned long flags;
1083
1084 snd_BUG_ON(ep == sender);
1085
1086 /*
1087 * In case the endpoint is operating in implicit feedback mode, prepare
1088 * a new outbound URB that has the same layout as the received packet
1089 * and add it to the list of pending urbs. queue_pending_output_urbs()
1090 * will take care of them later.
1091 */
1092 if (snd_usb_endpoint_implicit_feedback_sink(ep) &&
1093 ep->use_count != 0) {
1094
1095 /* implicit feedback case */
1096 int i, bytes = 0;
1097 struct snd_urb_ctx *in_ctx;
1098 struct snd_usb_packet_info *out_packet;
1099
1100 in_ctx = urb->context;
1101
1102 /* Count overall packet size */
1103 for (i = 0; i < in_ctx->packets; i++)
1104 if (urb->iso_frame_desc[i].status == 0)
1105 bytes += urb->iso_frame_desc[i].actual_length;
1106
1107 /*
1108 * skip empty packets. At least M-Audio's Fast Track Ultra stops
1109 * streaming once it received a 0-byte OUT URB
1110 */
1111 if (bytes == 0)
1112 return;
1113
1114 spin_lock_irqsave(&ep->lock, flags);
1115 out_packet = ep->next_packet + ep->next_packet_write_pos;
1116
1117 /*
1118 * Iterate through the inbound packet and prepare the lengths
1119 * for the output packet. The OUT packet we are about to send
1120 * will have the same amount of payload bytes per stride as the
1121 * IN packet we just received. Since the actual size is scaled
1122 * by the stride, use the sender stride to calculate the length
1123 * in case the number of channels differ between the implicitly
1124 * fed-back endpoint and the synchronizing endpoint.
1125 */
1126
1127 out_packet->packets = in_ctx->packets;
1128 for (i = 0; i < in_ctx->packets; i++) {
1129 if (urb->iso_frame_desc[i].status == 0)
1130 out_packet->packet_size[i] =
1131 urb->iso_frame_desc[i].actual_length / sender->stride;
1132 else
1133 out_packet->packet_size[i] = 0;
1134 }
1135
1136 ep->next_packet_write_pos++;
1137 ep->next_packet_write_pos %= MAX_URBS;
1138 spin_unlock_irqrestore(&ep->lock, flags);
1139 queue_pending_output_urbs(ep);
1140
1141 return;
1142 }
1143
1144 /*
1145 * process after playback sync complete
1146 *
1147 * Full speed devices report feedback values in 10.14 format as samples
1148 * per frame, high speed devices in 16.16 format as samples per
1149 * microframe.
1150 *
1151 * Because the Audio Class 1 spec was written before USB 2.0, many high
1152 * speed devices use a wrong interpretation, some others use an
1153 * entirely different format.
1154 *
1155 * Therefore, we cannot predict what format any particular device uses
1156 * and must detect it automatically.
1157 */
1158
1159 if (urb->iso_frame_desc[0].status != 0 ||
1160 urb->iso_frame_desc[0].actual_length < 3)
1161 return;
1162
1163 f = le32_to_cpup(urb->transfer_buffer);
1164 if (urb->iso_frame_desc[0].actual_length == 3)
1165 f &= 0x00ffffff;
1166 else
1167 f &= 0x0fffffff;
1168
1169 if (f == 0)
1170 return;
1171
1172 if (unlikely(sender->tenor_fb_quirk)) {
1173 /*
1174 * Devices based on Tenor 8802 chipsets (TEAC UD-H01
1175 * and others) sometimes change the feedback value
1176 * by +/- 0x1.0000.
1177 */
1178 if (f < ep->freqn - 0x8000)
1179 f += 0xf000;
1180 else if (f > ep->freqn + 0x8000)
1181 f -= 0xf000;
1182 } else if (unlikely(ep->freqshift == INT_MIN)) {
1183 /*
1184 * The first time we see a feedback value, determine its format
1185 * by shifting it left or right until it matches the nominal
1186 * frequency value. This assumes that the feedback does not
1187 * differ from the nominal value more than +50% or -25%.
1188 */
1189 shift = 0;
1190 while (f < ep->freqn - ep->freqn / 4) {
1191 f <<= 1;
1192 shift++;
1193 }
1194 while (f > ep->freqn + ep->freqn / 2) {
1195 f >>= 1;
1196 shift--;
1197 }
1198 ep->freqshift = shift;
1199 } else if (ep->freqshift >= 0)
1200 f <<= ep->freqshift;
1201 else
1202 f >>= -ep->freqshift;
1203
1204 if (likely(f >= ep->freqn - ep->freqn / 8 && f <= ep->freqmax)) {
1205 /*
1206 * If the frequency looks valid, set it.
1207 * This value is referred to in prepare_playback_urb().
1208 */
1209 spin_lock_irqsave(&ep->lock, flags);
1210 ep->freqm = f;
1211 spin_unlock_irqrestore(&ep->lock, flags);
1212 } else {
1213 /*
1214 * Out of range; maybe the shift value is wrong.
1215 * Reset it so that we autodetect again the next time.
1216 */
1217 ep->freqshift = INT_MIN;
1218 }
1219}
1220