Loading...
1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
15 *
16 */
17
18#include <linux/init.h>
19#include <linux/slab.h>
20#include <linux/usb.h>
21#include <linux/usb/audio.h>
22#include <linux/usb/audio-v2.h>
23
24#include <sound/core.h>
25#include <sound/pcm.h>
26
27#include "usbaudio.h"
28#include "card.h"
29#include "proc.h"
30#include "quirks.h"
31#include "endpoint.h"
32#include "urb.h"
33#include "pcm.h"
34#include "helper.h"
35#include "format.h"
36#include "clock.h"
37
38/*
39 * free a substream
40 */
41static void free_substream(struct snd_usb_substream *subs)
42{
43 struct list_head *p, *n;
44
45 if (!subs->num_formats)
46 return; /* not initialized */
47 list_for_each_safe(p, n, &subs->fmt_list) {
48 struct audioformat *fp = list_entry(p, struct audioformat, list);
49 kfree(fp->rate_table);
50 kfree(fp);
51 }
52 kfree(subs->rate_list.list);
53}
54
55
56/*
57 * free a usb stream instance
58 */
59static void snd_usb_audio_stream_free(struct snd_usb_stream *stream)
60{
61 free_substream(&stream->substream[0]);
62 free_substream(&stream->substream[1]);
63 list_del(&stream->list);
64 kfree(stream);
65}
66
67static void snd_usb_audio_pcm_free(struct snd_pcm *pcm)
68{
69 struct snd_usb_stream *stream = pcm->private_data;
70 if (stream) {
71 stream->pcm = NULL;
72 snd_usb_audio_stream_free(stream);
73 }
74}
75
76
77/*
78 * add this endpoint to the chip instance.
79 * if a stream with the same endpoint already exists, append to it.
80 * if not, create a new pcm stream.
81 */
82int snd_usb_add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct audioformat *fp)
83{
84 struct list_head *p;
85 struct snd_usb_stream *as;
86 struct snd_usb_substream *subs;
87 struct snd_pcm *pcm;
88 int err;
89
90 list_for_each(p, &chip->pcm_list) {
91 as = list_entry(p, struct snd_usb_stream, list);
92 if (as->fmt_type != fp->fmt_type)
93 continue;
94 subs = &as->substream[stream];
95 if (!subs->endpoint)
96 continue;
97 if (subs->endpoint == fp->endpoint) {
98 list_add_tail(&fp->list, &subs->fmt_list);
99 subs->num_formats++;
100 subs->formats |= fp->formats;
101 return 0;
102 }
103 }
104 /* look for an empty stream */
105 list_for_each(p, &chip->pcm_list) {
106 as = list_entry(p, struct snd_usb_stream, list);
107 if (as->fmt_type != fp->fmt_type)
108 continue;
109 subs = &as->substream[stream];
110 if (subs->endpoint)
111 continue;
112 err = snd_pcm_new_stream(as->pcm, stream, 1);
113 if (err < 0)
114 return err;
115 snd_usb_init_substream(as, stream, fp);
116 return 0;
117 }
118
119 /* create a new pcm */
120 as = kzalloc(sizeof(*as), GFP_KERNEL);
121 if (!as)
122 return -ENOMEM;
123 as->pcm_index = chip->pcm_devs;
124 as->chip = chip;
125 as->fmt_type = fp->fmt_type;
126 err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs,
127 stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0,
128 stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1,
129 &pcm);
130 if (err < 0) {
131 kfree(as);
132 return err;
133 }
134 as->pcm = pcm;
135 pcm->private_data = as;
136 pcm->private_free = snd_usb_audio_pcm_free;
137 pcm->info_flags = 0;
138 if (chip->pcm_devs > 0)
139 sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs);
140 else
141 strcpy(pcm->name, "USB Audio");
142
143 snd_usb_init_substream(as, stream, fp);
144
145 list_add(&as->list, &chip->pcm_list);
146 chip->pcm_devs++;
147
148 snd_usb_proc_pcm_format_add(as);
149
150 return 0;
151}
152
153static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
154 struct usb_host_interface *alts,
155 int protocol, int iface_no)
156{
157 /* parsed with a v1 header here. that's ok as we only look at the
158 * header first which is the same for both versions */
159 struct uac_iso_endpoint_descriptor *csep;
160 struct usb_interface_descriptor *altsd = get_iface_desc(alts);
161 int attributes = 0;
162
163 csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
164
165 /* Creamware Noah has this descriptor after the 2nd endpoint */
166 if (!csep && altsd->bNumEndpoints >= 2)
167 csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
168
169 if (!csep || csep->bLength < 7 ||
170 csep->bDescriptorSubtype != UAC_EP_GENERAL) {
171 snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
172 " class specific endpoint descriptor\n",
173 chip->dev->devnum, iface_no,
174 altsd->bAlternateSetting);
175 return 0;
176 }
177
178 if (protocol == UAC_VERSION_1) {
179 attributes = csep->bmAttributes;
180 } else {
181 struct uac2_iso_endpoint_descriptor *csep2 =
182 (struct uac2_iso_endpoint_descriptor *) csep;
183
184 attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX;
185
186 /* emulate the endpoint attributes of a v1 device */
187 if (csep2->bmControls & UAC2_CONTROL_PITCH)
188 attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL;
189 }
190
191 return attributes;
192}
193
194static struct uac2_input_terminal_descriptor *
195 snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
196 int terminal_id)
197{
198 struct uac2_input_terminal_descriptor *term = NULL;
199
200 while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
201 ctrl_iface->extralen,
202 term, UAC_INPUT_TERMINAL))) {
203 if (term->bTerminalID == terminal_id)
204 return term;
205 }
206
207 return NULL;
208}
209
210static struct uac2_output_terminal_descriptor *
211 snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
212 int terminal_id)
213{
214 struct uac2_output_terminal_descriptor *term = NULL;
215
216 while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
217 ctrl_iface->extralen,
218 term, UAC_OUTPUT_TERMINAL))) {
219 if (term->bTerminalID == terminal_id)
220 return term;
221 }
222
223 return NULL;
224}
225
226int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
227{
228 struct usb_device *dev;
229 struct usb_interface *iface;
230 struct usb_host_interface *alts;
231 struct usb_interface_descriptor *altsd;
232 int i, altno, err, stream;
233 int format = 0, num_channels = 0;
234 struct audioformat *fp = NULL;
235 int num, protocol, clock = 0;
236 struct uac_format_type_i_continuous_descriptor *fmt;
237
238 dev = chip->dev;
239
240 /* parse the interface's altsettings */
241 iface = usb_ifnum_to_if(dev, iface_no);
242
243 num = iface->num_altsetting;
244
245 /*
246 * Dallas DS4201 workaround: It presents 5 altsettings, but the last
247 * one misses syncpipe, and does not produce any sound.
248 */
249 if (chip->usb_id == USB_ID(0x04fa, 0x4201))
250 num = 4;
251
252 for (i = 0; i < num; i++) {
253 alts = &iface->altsetting[i];
254 altsd = get_iface_desc(alts);
255 protocol = altsd->bInterfaceProtocol;
256 /* skip invalid one */
257 if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
258 altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
259 (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
260 altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) ||
261 altsd->bNumEndpoints < 1 ||
262 le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
263 continue;
264 /* must be isochronous */
265 if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
266 USB_ENDPOINT_XFER_ISOC)
267 continue;
268 /* check direction */
269 stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ?
270 SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
271 altno = altsd->bAlternateSetting;
272
273 if (snd_usb_apply_interface_quirk(chip, iface_no, altno))
274 continue;
275
276 /* get audio formats */
277 switch (protocol) {
278 default:
279 snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
280 dev->devnum, iface_no, altno, protocol);
281 protocol = UAC_VERSION_1;
282 /* fall through */
283
284 case UAC_VERSION_1: {
285 struct uac1_as_header_descriptor *as =
286 snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
287
288 if (!as) {
289 snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
290 dev->devnum, iface_no, altno);
291 continue;
292 }
293
294 if (as->bLength < sizeof(*as)) {
295 snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
296 dev->devnum, iface_no, altno);
297 continue;
298 }
299
300 format = le16_to_cpu(as->wFormatTag); /* remember the format value */
301 break;
302 }
303
304 case UAC_VERSION_2: {
305 struct uac2_input_terminal_descriptor *input_term;
306 struct uac2_output_terminal_descriptor *output_term;
307 struct uac2_as_header_descriptor *as =
308 snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
309
310 if (!as) {
311 snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
312 dev->devnum, iface_no, altno);
313 continue;
314 }
315
316 if (as->bLength < sizeof(*as)) {
317 snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
318 dev->devnum, iface_no, altno);
319 continue;
320 }
321
322 num_channels = as->bNrChannels;
323 format = le32_to_cpu(as->bmFormats);
324
325 /* lookup the terminal associated to this interface
326 * to extract the clock */
327 input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
328 as->bTerminalLink);
329 if (input_term) {
330 clock = input_term->bCSourceID;
331 break;
332 }
333
334 output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
335 as->bTerminalLink);
336 if (output_term) {
337 clock = output_term->bCSourceID;
338 break;
339 }
340
341 snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
342 dev->devnum, iface_no, altno, as->bTerminalLink);
343 continue;
344 }
345 }
346
347 /* get format type */
348 fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
349 if (!fmt) {
350 snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
351 dev->devnum, iface_no, altno);
352 continue;
353 }
354 if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
355 ((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) {
356 snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
357 dev->devnum, iface_no, altno);
358 continue;
359 }
360
361 /*
362 * Blue Microphones workaround: The last altsetting is identical
363 * with the previous one, except for a larger packet size, but
364 * is actually a mislabeled two-channel setting; ignore it.
365 */
366 if (fmt->bNrChannels == 1 &&
367 fmt->bSubframeSize == 2 &&
368 altno == 2 && num == 3 &&
369 fp && fp->altsetting == 1 && fp->channels == 1 &&
370 fp->formats == SNDRV_PCM_FMTBIT_S16_LE &&
371 protocol == UAC_VERSION_1 &&
372 le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
373 fp->maxpacksize * 2)
374 continue;
375
376 fp = kzalloc(sizeof(*fp), GFP_KERNEL);
377 if (! fp) {
378 snd_printk(KERN_ERR "cannot malloc\n");
379 return -ENOMEM;
380 }
381
382 fp->iface = iface_no;
383 fp->altsetting = altno;
384 fp->altset_idx = i;
385 fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
386 fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
387 fp->datainterval = snd_usb_parse_datainterval(chip, alts);
388 fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
389 /* num_channels is only set for v2 interfaces */
390 fp->channels = num_channels;
391 if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
392 fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
393 * (fp->maxpacksize & 0x7ff);
394 fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
395 fp->clock = clock;
396
397 /* some quirks for attributes here */
398
399 switch (chip->usb_id) {
400 case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
401 /* Optoplay sets the sample rate attribute although
402 * it seems not supporting it in fact.
403 */
404 fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
405 break;
406 case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
407 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
408 /* doesn't set the sample rate attribute, but supports it */
409 fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
410 break;
411 case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
412 case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
413 case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
414 case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
415 an older model 77d:223) */
416 /*
417 * plantronics headset and Griffin iMic have set adaptive-in
418 * although it's really not...
419 */
420 fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
421 if (stream == SNDRV_PCM_STREAM_PLAYBACK)
422 fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
423 else
424 fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
425 break;
426 }
427
428 /* ok, let's parse further... */
429 if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
430 kfree(fp->rate_table);
431 kfree(fp);
432 fp = NULL;
433 continue;
434 }
435
436 snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
437 err = snd_usb_add_audio_endpoint(chip, stream, fp);
438 if (err < 0) {
439 kfree(fp->rate_table);
440 kfree(fp);
441 return err;
442 }
443 /* try to set the interface... */
444 usb_set_interface(chip->dev, iface_no, altno);
445 snd_usb_init_pitch(chip, iface_no, alts, fp);
446 snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max);
447 }
448 return 0;
449}
450
1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
15 *
16 */
17
18#include <linux/gfp.h>
19#include <linux/init.h>
20#include <linux/ratelimit.h>
21#include <linux/usb.h>
22#include <linux/usb/audio.h>
23#include <linux/slab.h>
24
25#include <sound/core.h>
26#include <sound/pcm.h>
27#include <sound/pcm_params.h>
28
29#include "usbaudio.h"
30#include "helper.h"
31#include "card.h"
32#include "endpoint.h"
33#include "pcm.h"
34#include "quirks.h"
35
36#define EP_FLAG_RUNNING 1
37#define EP_FLAG_STOPPING 2
38
39/*
40 * snd_usb_endpoint is a model that abstracts everything related to an
41 * USB endpoint and its streaming.
42 *
43 * There are functions to activate and deactivate the streaming URBs and
44 * optional callbacks to let the pcm logic handle the actual content of the
45 * packets for playback and record. Thus, the bus streaming and the audio
46 * handlers are fully decoupled.
47 *
48 * There are two different types of endpoints in audio applications.
49 *
50 * SND_USB_ENDPOINT_TYPE_DATA handles full audio data payload for both
51 * inbound and outbound traffic.
52 *
53 * SND_USB_ENDPOINT_TYPE_SYNC endpoints are for inbound traffic only and
54 * expect the payload to carry Q10.14 / Q16.16 formatted sync information
55 * (3 or 4 bytes).
56 *
57 * Each endpoint has to be configured prior to being used by calling
58 * snd_usb_endpoint_set_params().
59 *
60 * The model incorporates a reference counting, so that multiple users
61 * can call snd_usb_endpoint_start() and snd_usb_endpoint_stop(), and
62 * only the first user will effectively start the URBs, and only the last
63 * one to stop it will tear the URBs down again.
64 */
65
66/*
67 * convert a sampling rate into our full speed format (fs/1000 in Q16.16)
68 * this will overflow at approx 524 kHz
69 */
70static inline unsigned get_usb_full_speed_rate(unsigned int rate)
71{
72 return ((rate << 13) + 62) / 125;
73}
74
75/*
76 * convert a sampling rate into USB high speed format (fs/8000 in Q16.16)
77 * this will overflow at approx 4 MHz
78 */
79static inline unsigned get_usb_high_speed_rate(unsigned int rate)
80{
81 return ((rate << 10) + 62) / 125;
82}
83
84/*
85 * release a urb data
86 */
87static void release_urb_ctx(struct snd_urb_ctx *u)
88{
89 if (u->buffer_size)
90 usb_free_coherent(u->ep->chip->dev, u->buffer_size,
91 u->urb->transfer_buffer,
92 u->urb->transfer_dma);
93 usb_free_urb(u->urb);
94 u->urb = NULL;
95}
96
97static const char *usb_error_string(int err)
98{
99 switch (err) {
100 case -ENODEV:
101 return "no device";
102 case -ENOENT:
103 return "endpoint not enabled";
104 case -EPIPE:
105 return "endpoint stalled";
106 case -ENOSPC:
107 return "not enough bandwidth";
108 case -ESHUTDOWN:
109 return "device disabled";
110 case -EHOSTUNREACH:
111 return "device suspended";
112 case -EINVAL:
113 case -EAGAIN:
114 case -EFBIG:
115 case -EMSGSIZE:
116 return "internal error";
117 default:
118 return "unknown error";
119 }
120}
121
122/**
123 * snd_usb_endpoint_implicit_feedback_sink: Report endpoint usage type
124 *
125 * @ep: The snd_usb_endpoint
126 *
127 * Determine whether an endpoint is driven by an implicit feedback
128 * data endpoint source.
129 */
130int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep)
131{
132 return ep->sync_master &&
133 ep->sync_master->type == SND_USB_ENDPOINT_TYPE_DATA &&
134 ep->type == SND_USB_ENDPOINT_TYPE_DATA &&
135 usb_pipeout(ep->pipe);
136}
137
138/*
139 * For streaming based on information derived from sync endpoints,
140 * prepare_outbound_urb_sizes() will call next_packet_size() to
141 * determine the number of samples to be sent in the next packet.
142 *
143 * For implicit feedback, next_packet_size() is unused.
144 */
145int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
146{
147 unsigned long flags;
148 int ret;
149
150 if (ep->fill_max)
151 return ep->maxframesize;
152
153 spin_lock_irqsave(&ep->lock, flags);
154 ep->phase = (ep->phase & 0xffff)
155 + (ep->freqm << ep->datainterval);
156 ret = min(ep->phase >> 16, ep->maxframesize);
157 spin_unlock_irqrestore(&ep->lock, flags);
158
159 return ret;
160}
161
162static void retire_outbound_urb(struct snd_usb_endpoint *ep,
163 struct snd_urb_ctx *urb_ctx)
164{
165 if (ep->retire_data_urb)
166 ep->retire_data_urb(ep->data_subs, urb_ctx->urb);
167}
168
169static void retire_inbound_urb(struct snd_usb_endpoint *ep,
170 struct snd_urb_ctx *urb_ctx)
171{
172 struct urb *urb = urb_ctx->urb;
173
174 if (unlikely(ep->skip_packets > 0)) {
175 ep->skip_packets--;
176 return;
177 }
178
179 if (ep->sync_slave)
180 snd_usb_handle_sync_urb(ep->sync_slave, ep, urb);
181
182 if (ep->retire_data_urb)
183 ep->retire_data_urb(ep->data_subs, urb);
184}
185
186static void prepare_silent_urb(struct snd_usb_endpoint *ep,
187 struct snd_urb_ctx *ctx)
188{
189 struct urb *urb = ctx->urb;
190 unsigned int offs = 0;
191 unsigned int extra = 0;
192 __le32 packet_length;
193 int i;
194
195 /* For tx_length_quirk, put packet length at start of packet */
196 if (ep->chip->tx_length_quirk)
197 extra = sizeof(packet_length);
198
199 for (i = 0; i < ctx->packets; ++i) {
200 unsigned int offset;
201 unsigned int length;
202 int counts;
203
204 if (ctx->packet_size[i])
205 counts = ctx->packet_size[i];
206 else
207 counts = snd_usb_endpoint_next_packet_size(ep);
208
209 length = counts * ep->stride; /* number of silent bytes */
210 offset = offs * ep->stride + extra * i;
211 urb->iso_frame_desc[i].offset = offset;
212 urb->iso_frame_desc[i].length = length + extra;
213 if (extra) {
214 packet_length = cpu_to_le32(length);
215 memcpy(urb->transfer_buffer + offset,
216 &packet_length, sizeof(packet_length));
217 }
218 memset(urb->transfer_buffer + offset + extra,
219 ep->silence_value, length);
220 offs += counts;
221 }
222
223 urb->number_of_packets = ctx->packets;
224 urb->transfer_buffer_length = offs * ep->stride + ctx->packets * extra;
225}
226
227/*
228 * Prepare a PLAYBACK urb for submission to the bus.
229 */
230static void prepare_outbound_urb(struct snd_usb_endpoint *ep,
231 struct snd_urb_ctx *ctx)
232{
233 struct urb *urb = ctx->urb;
234 unsigned char *cp = urb->transfer_buffer;
235
236 urb->dev = ep->chip->dev; /* we need to set this at each time */
237
238 switch (ep->type) {
239 case SND_USB_ENDPOINT_TYPE_DATA:
240 if (ep->prepare_data_urb) {
241 ep->prepare_data_urb(ep->data_subs, urb);
242 } else {
243 /* no data provider, so send silence */
244 prepare_silent_urb(ep, ctx);
245 }
246 break;
247
248 case SND_USB_ENDPOINT_TYPE_SYNC:
249 if (snd_usb_get_speed(ep->chip->dev) >= USB_SPEED_HIGH) {
250 /*
251 * fill the length and offset of each urb descriptor.
252 * the fixed 12.13 frequency is passed as 16.16 through the pipe.
253 */
254 urb->iso_frame_desc[0].length = 4;
255 urb->iso_frame_desc[0].offset = 0;
256 cp[0] = ep->freqn;
257 cp[1] = ep->freqn >> 8;
258 cp[2] = ep->freqn >> 16;
259 cp[3] = ep->freqn >> 24;
260 } else {
261 /*
262 * fill the length and offset of each urb descriptor.
263 * the fixed 10.14 frequency is passed through the pipe.
264 */
265 urb->iso_frame_desc[0].length = 3;
266 urb->iso_frame_desc[0].offset = 0;
267 cp[0] = ep->freqn >> 2;
268 cp[1] = ep->freqn >> 10;
269 cp[2] = ep->freqn >> 18;
270 }
271
272 break;
273 }
274}
275
276/*
277 * Prepare a CAPTURE or SYNC urb for submission to the bus.
278 */
279static inline void prepare_inbound_urb(struct snd_usb_endpoint *ep,
280 struct snd_urb_ctx *urb_ctx)
281{
282 int i, offs;
283 struct urb *urb = urb_ctx->urb;
284
285 urb->dev = ep->chip->dev; /* we need to set this at each time */
286
287 switch (ep->type) {
288 case SND_USB_ENDPOINT_TYPE_DATA:
289 offs = 0;
290 for (i = 0; i < urb_ctx->packets; i++) {
291 urb->iso_frame_desc[i].offset = offs;
292 urb->iso_frame_desc[i].length = ep->curpacksize;
293 offs += ep->curpacksize;
294 }
295
296 urb->transfer_buffer_length = offs;
297 urb->number_of_packets = urb_ctx->packets;
298 break;
299
300 case SND_USB_ENDPOINT_TYPE_SYNC:
301 urb->iso_frame_desc[0].length = min(4u, ep->syncmaxsize);
302 urb->iso_frame_desc[0].offset = 0;
303 break;
304 }
305}
306
307/*
308 * Send output urbs that have been prepared previously. URBs are dequeued
309 * from ep->ready_playback_urbs and in case there there aren't any available
310 * or there are no packets that have been prepared, this function does
311 * nothing.
312 *
313 * The reason why the functionality of sending and preparing URBs is separated
314 * is that host controllers don't guarantee the order in which they return
315 * inbound and outbound packets to their submitters.
316 *
317 * This function is only used for implicit feedback endpoints. For endpoints
318 * driven by dedicated sync endpoints, URBs are immediately re-submitted
319 * from their completion handler.
320 */
321static void queue_pending_output_urbs(struct snd_usb_endpoint *ep)
322{
323 while (test_bit(EP_FLAG_RUNNING, &ep->flags)) {
324
325 unsigned long flags;
326 struct snd_usb_packet_info *uninitialized_var(packet);
327 struct snd_urb_ctx *ctx = NULL;
328 struct urb *urb;
329 int err, i;
330
331 spin_lock_irqsave(&ep->lock, flags);
332 if (ep->next_packet_read_pos != ep->next_packet_write_pos) {
333 packet = ep->next_packet + ep->next_packet_read_pos;
334 ep->next_packet_read_pos++;
335 ep->next_packet_read_pos %= MAX_URBS;
336
337 /* take URB out of FIFO */
338 if (!list_empty(&ep->ready_playback_urbs))
339 ctx = list_first_entry(&ep->ready_playback_urbs,
340 struct snd_urb_ctx, ready_list);
341 }
342 spin_unlock_irqrestore(&ep->lock, flags);
343
344 if (ctx == NULL)
345 return;
346
347 list_del_init(&ctx->ready_list);
348 urb = ctx->urb;
349
350 /* copy over the length information */
351 for (i = 0; i < packet->packets; i++)
352 ctx->packet_size[i] = packet->packet_size[i];
353
354 /* call the data handler to fill in playback data */
355 prepare_outbound_urb(ep, ctx);
356
357 err = usb_submit_urb(ctx->urb, GFP_ATOMIC);
358 if (err < 0)
359 usb_audio_err(ep->chip,
360 "Unable to submit urb #%d: %d (urb %p)\n",
361 ctx->index, err, ctx->urb);
362 else
363 set_bit(ctx->index, &ep->active_mask);
364 }
365}
366
367/*
368 * complete callback for urbs
369 */
370static void snd_complete_urb(struct urb *urb)
371{
372 struct snd_urb_ctx *ctx = urb->context;
373 struct snd_usb_endpoint *ep = ctx->ep;
374 struct snd_pcm_substream *substream;
375 unsigned long flags;
376 int err;
377
378 if (unlikely(urb->status == -ENOENT || /* unlinked */
379 urb->status == -ENODEV || /* device removed */
380 urb->status == -ECONNRESET || /* unlinked */
381 urb->status == -ESHUTDOWN)) /* device disabled */
382 goto exit_clear;
383 /* device disconnected */
384 if (unlikely(atomic_read(&ep->chip->shutdown)))
385 goto exit_clear;
386
387 if (usb_pipeout(ep->pipe)) {
388 retire_outbound_urb(ep, ctx);
389 /* can be stopped during retire callback */
390 if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
391 goto exit_clear;
392
393 if (snd_usb_endpoint_implicit_feedback_sink(ep)) {
394 spin_lock_irqsave(&ep->lock, flags);
395 list_add_tail(&ctx->ready_list, &ep->ready_playback_urbs);
396 spin_unlock_irqrestore(&ep->lock, flags);
397 queue_pending_output_urbs(ep);
398
399 goto exit_clear;
400 }
401
402 prepare_outbound_urb(ep, ctx);
403 } else {
404 retire_inbound_urb(ep, ctx);
405 /* can be stopped during retire callback */
406 if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
407 goto exit_clear;
408
409 prepare_inbound_urb(ep, ctx);
410 }
411
412 err = usb_submit_urb(urb, GFP_ATOMIC);
413 if (err == 0)
414 return;
415
416 usb_audio_err(ep->chip, "cannot submit urb (err = %d)\n", err);
417 if (ep->data_subs && ep->data_subs->pcm_substream) {
418 substream = ep->data_subs->pcm_substream;
419 snd_pcm_stop_xrun(substream);
420 }
421
422exit_clear:
423 clear_bit(ctx->index, &ep->active_mask);
424}
425
426/**
427 * snd_usb_add_endpoint: Add an endpoint to an USB audio chip
428 *
429 * @chip: The chip
430 * @alts: The USB host interface
431 * @ep_num: The number of the endpoint to use
432 * @direction: SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE
433 * @type: SND_USB_ENDPOINT_TYPE_DATA or SND_USB_ENDPOINT_TYPE_SYNC
434 *
435 * If the requested endpoint has not been added to the given chip before,
436 * a new instance is created. Otherwise, a pointer to the previoulsy
437 * created instance is returned. In case of any error, NULL is returned.
438 *
439 * New endpoints will be added to chip->ep_list and must be freed by
440 * calling snd_usb_endpoint_free().
441 *
442 * For SND_USB_ENDPOINT_TYPE_SYNC, the caller needs to guarantee that
443 * bNumEndpoints > 1 beforehand.
444 */
445struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
446 struct usb_host_interface *alts,
447 int ep_num, int direction, int type)
448{
449 struct snd_usb_endpoint *ep;
450 int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
451
452 if (WARN_ON(!alts))
453 return NULL;
454
455 mutex_lock(&chip->mutex);
456
457 list_for_each_entry(ep, &chip->ep_list, list) {
458 if (ep->ep_num == ep_num &&
459 ep->iface == alts->desc.bInterfaceNumber &&
460 ep->altsetting == alts->desc.bAlternateSetting) {
461 usb_audio_dbg(ep->chip,
462 "Re-using EP %x in iface %d,%d @%p\n",
463 ep_num, ep->iface, ep->altsetting, ep);
464 goto __exit_unlock;
465 }
466 }
467
468 usb_audio_dbg(chip, "Creating new %s %s endpoint #%x\n",
469 is_playback ? "playback" : "capture",
470 type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
471 ep_num);
472
473 ep = kzalloc(sizeof(*ep), GFP_KERNEL);
474 if (!ep)
475 goto __exit_unlock;
476
477 ep->chip = chip;
478 spin_lock_init(&ep->lock);
479 ep->type = type;
480 ep->ep_num = ep_num;
481 ep->iface = alts->desc.bInterfaceNumber;
482 ep->altsetting = alts->desc.bAlternateSetting;
483 INIT_LIST_HEAD(&ep->ready_playback_urbs);
484 ep_num &= USB_ENDPOINT_NUMBER_MASK;
485
486 if (is_playback)
487 ep->pipe = usb_sndisocpipe(chip->dev, ep_num);
488 else
489 ep->pipe = usb_rcvisocpipe(chip->dev, ep_num);
490
491 if (type == SND_USB_ENDPOINT_TYPE_SYNC) {
492 if (get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
493 get_endpoint(alts, 1)->bRefresh >= 1 &&
494 get_endpoint(alts, 1)->bRefresh <= 9)
495 ep->syncinterval = get_endpoint(alts, 1)->bRefresh;
496 else if (snd_usb_get_speed(chip->dev) == USB_SPEED_FULL)
497 ep->syncinterval = 1;
498 else if (get_endpoint(alts, 1)->bInterval >= 1 &&
499 get_endpoint(alts, 1)->bInterval <= 16)
500 ep->syncinterval = get_endpoint(alts, 1)->bInterval - 1;
501 else
502 ep->syncinterval = 3;
503
504 ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize);
505
506 if (chip->usb_id == USB_ID(0x0644, 0x8038) /* TEAC UD-H01 */ &&
507 ep->syncmaxsize == 4)
508 ep->udh01_fb_quirk = 1;
509 }
510
511 list_add_tail(&ep->list, &chip->ep_list);
512
513__exit_unlock:
514 mutex_unlock(&chip->mutex);
515
516 return ep;
517}
518
519/*
520 * wait until all urbs are processed.
521 */
522static int wait_clear_urbs(struct snd_usb_endpoint *ep)
523{
524 unsigned long end_time = jiffies + msecs_to_jiffies(1000);
525 int alive;
526
527 do {
528 alive = bitmap_weight(&ep->active_mask, ep->nurbs);
529 if (!alive)
530 break;
531
532 schedule_timeout_uninterruptible(1);
533 } while (time_before(jiffies, end_time));
534
535 if (alive)
536 usb_audio_err(ep->chip,
537 "timeout: still %d active urbs on EP #%x\n",
538 alive, ep->ep_num);
539 clear_bit(EP_FLAG_STOPPING, &ep->flags);
540
541 return 0;
542}
543
544/* sync the pending stop operation;
545 * this function itself doesn't trigger the stop operation
546 */
547void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep)
548{
549 if (ep && test_bit(EP_FLAG_STOPPING, &ep->flags))
550 wait_clear_urbs(ep);
551}
552
553/*
554 * unlink active urbs.
555 */
556static int deactivate_urbs(struct snd_usb_endpoint *ep, bool force)
557{
558 unsigned int i;
559
560 if (!force && atomic_read(&ep->chip->shutdown)) /* to be sure... */
561 return -EBADFD;
562
563 clear_bit(EP_FLAG_RUNNING, &ep->flags);
564
565 INIT_LIST_HEAD(&ep->ready_playback_urbs);
566 ep->next_packet_read_pos = 0;
567 ep->next_packet_write_pos = 0;
568
569 for (i = 0; i < ep->nurbs; i++) {
570 if (test_bit(i, &ep->active_mask)) {
571 if (!test_and_set_bit(i, &ep->unlink_mask)) {
572 struct urb *u = ep->urb[i].urb;
573 usb_unlink_urb(u);
574 }
575 }
576 }
577
578 return 0;
579}
580
581/*
582 * release an endpoint's urbs
583 */
584static void release_urbs(struct snd_usb_endpoint *ep, int force)
585{
586 int i;
587
588 /* route incoming urbs to nirvana */
589 ep->retire_data_urb = NULL;
590 ep->prepare_data_urb = NULL;
591
592 /* stop urbs */
593 deactivate_urbs(ep, force);
594 wait_clear_urbs(ep);
595
596 for (i = 0; i < ep->nurbs; i++)
597 release_urb_ctx(&ep->urb[i]);
598
599 if (ep->syncbuf)
600 usb_free_coherent(ep->chip->dev, SYNC_URBS * 4,
601 ep->syncbuf, ep->sync_dma);
602
603 ep->syncbuf = NULL;
604 ep->nurbs = 0;
605}
606
607/*
608 * configure a data endpoint
609 */
610static int data_ep_set_params(struct snd_usb_endpoint *ep,
611 snd_pcm_format_t pcm_format,
612 unsigned int channels,
613 unsigned int period_bytes,
614 unsigned int frames_per_period,
615 unsigned int periods_per_buffer,
616 struct audioformat *fmt,
617 struct snd_usb_endpoint *sync_ep)
618{
619 unsigned int maxsize, minsize, packs_per_ms, max_packs_per_urb;
620 unsigned int max_packs_per_period, urbs_per_period, urb_packs;
621 unsigned int max_urbs, i;
622 int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels;
623 int tx_length_quirk = (ep->chip->tx_length_quirk &&
624 usb_pipeout(ep->pipe));
625
626 if (pcm_format == SNDRV_PCM_FORMAT_DSD_U16_LE && fmt->dsd_dop) {
627 /*
628 * When operating in DSD DOP mode, the size of a sample frame
629 * in hardware differs from the actual physical format width
630 * because we need to make room for the DOP markers.
631 */
632 frame_bits += channels << 3;
633 }
634
635 ep->datainterval = fmt->datainterval;
636 ep->stride = frame_bits >> 3;
637 ep->silence_value = pcm_format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
638
639 /* assume max. frequency is 25% higher than nominal */
640 ep->freqmax = ep->freqn + (ep->freqn >> 2);
641 /* Round up freqmax to nearest integer in order to calculate maximum
642 * packet size, which must represent a whole number of frames.
643 * This is accomplished by adding 0x0.ffff before converting the
644 * Q16.16 format into integer.
645 * In order to accurately calculate the maximum packet size when
646 * the data interval is more than 1 (i.e. ep->datainterval > 0),
647 * multiply by the data interval prior to rounding. For instance,
648 * a freqmax of 41 kHz will result in a max packet size of 6 (5.125)
649 * frames with a data interval of 1, but 11 (10.25) frames with a
650 * data interval of 2.
651 * (ep->freqmax << ep->datainterval overflows at 8.192 MHz for the
652 * maximum datainterval value of 3, at USB full speed, higher for
653 * USB high speed, noting that ep->freqmax is in units of
654 * frames per packet in Q16.16 format.)
655 */
656 maxsize = (((ep->freqmax << ep->datainterval) + 0xffff) >> 16) *
657 (frame_bits >> 3);
658 if (tx_length_quirk)
659 maxsize += sizeof(__le32); /* Space for length descriptor */
660 /* but wMaxPacketSize might reduce this */
661 if (ep->maxpacksize && ep->maxpacksize < maxsize) {
662 /* whatever fits into a max. size packet */
663 unsigned int data_maxsize = maxsize = ep->maxpacksize;
664
665 if (tx_length_quirk)
666 /* Need to remove the length descriptor to calc freq */
667 data_maxsize -= sizeof(__le32);
668 ep->freqmax = (data_maxsize / (frame_bits >> 3))
669 << (16 - ep->datainterval);
670 }
671
672 if (ep->fill_max)
673 ep->curpacksize = ep->maxpacksize;
674 else
675 ep->curpacksize = maxsize;
676
677 if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL) {
678 packs_per_ms = 8 >> ep->datainterval;
679 max_packs_per_urb = MAX_PACKS_HS;
680 } else {
681 packs_per_ms = 1;
682 max_packs_per_urb = MAX_PACKS;
683 }
684 if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep))
685 max_packs_per_urb = min(max_packs_per_urb,
686 1U << sync_ep->syncinterval);
687 max_packs_per_urb = max(1u, max_packs_per_urb >> ep->datainterval);
688
689 /*
690 * Capture endpoints need to use small URBs because there's no way
691 * to tell in advance where the next period will end, and we don't
692 * want the next URB to complete much after the period ends.
693 *
694 * Playback endpoints with implicit sync much use the same parameters
695 * as their corresponding capture endpoint.
696 */
697 if (usb_pipein(ep->pipe) ||
698 snd_usb_endpoint_implicit_feedback_sink(ep)) {
699
700 urb_packs = packs_per_ms;
701 /*
702 * Wireless devices can poll at a max rate of once per 4ms.
703 * For dataintervals less than 5, increase the packet count to
704 * allow the host controller to use bursting to fill in the
705 * gaps.
706 */
707 if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) {
708 int interval = ep->datainterval;
709 while (interval < 5) {
710 urb_packs <<= 1;
711 ++interval;
712 }
713 }
714 /* make capture URBs <= 1 ms and smaller than a period */
715 urb_packs = min(max_packs_per_urb, urb_packs);
716 while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
717 urb_packs >>= 1;
718 ep->nurbs = MAX_URBS;
719
720 /*
721 * Playback endpoints without implicit sync are adjusted so that
722 * a period fits as evenly as possible in the smallest number of
723 * URBs. The total number of URBs is adjusted to the size of the
724 * ALSA buffer, subject to the MAX_URBS and MAX_QUEUE limits.
725 */
726 } else {
727 /* determine how small a packet can be */
728 minsize = (ep->freqn >> (16 - ep->datainterval)) *
729 (frame_bits >> 3);
730 /* with sync from device, assume it can be 12% lower */
731 if (sync_ep)
732 minsize -= minsize >> 3;
733 minsize = max(minsize, 1u);
734
735 /* how many packets will contain an entire ALSA period? */
736 max_packs_per_period = DIV_ROUND_UP(period_bytes, minsize);
737
738 /* how many URBs will contain a period? */
739 urbs_per_period = DIV_ROUND_UP(max_packs_per_period,
740 max_packs_per_urb);
741 /* how many packets are needed in each URB? */
742 urb_packs = DIV_ROUND_UP(max_packs_per_period, urbs_per_period);
743
744 /* limit the number of frames in a single URB */
745 ep->max_urb_frames = DIV_ROUND_UP(frames_per_period,
746 urbs_per_period);
747
748 /* try to use enough URBs to contain an entire ALSA buffer */
749 max_urbs = min((unsigned) MAX_URBS,
750 MAX_QUEUE * packs_per_ms / urb_packs);
751 ep->nurbs = min(max_urbs, urbs_per_period * periods_per_buffer);
752 }
753
754 /* allocate and initialize data urbs */
755 for (i = 0; i < ep->nurbs; i++) {
756 struct snd_urb_ctx *u = &ep->urb[i];
757 u->index = i;
758 u->ep = ep;
759 u->packets = urb_packs;
760 u->buffer_size = maxsize * u->packets;
761
762 if (fmt->fmt_type == UAC_FORMAT_TYPE_II)
763 u->packets++; /* for transfer delimiter */
764 u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
765 if (!u->urb)
766 goto out_of_memory;
767
768 u->urb->transfer_buffer =
769 usb_alloc_coherent(ep->chip->dev, u->buffer_size,
770 GFP_KERNEL, &u->urb->transfer_dma);
771 if (!u->urb->transfer_buffer)
772 goto out_of_memory;
773 u->urb->pipe = ep->pipe;
774 u->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
775 u->urb->interval = 1 << ep->datainterval;
776 u->urb->context = u;
777 u->urb->complete = snd_complete_urb;
778 INIT_LIST_HEAD(&u->ready_list);
779 }
780
781 return 0;
782
783out_of_memory:
784 release_urbs(ep, 0);
785 return -ENOMEM;
786}
787
788/*
789 * configure a sync endpoint
790 */
791static int sync_ep_set_params(struct snd_usb_endpoint *ep)
792{
793 int i;
794
795 ep->syncbuf = usb_alloc_coherent(ep->chip->dev, SYNC_URBS * 4,
796 GFP_KERNEL, &ep->sync_dma);
797 if (!ep->syncbuf)
798 return -ENOMEM;
799
800 for (i = 0; i < SYNC_URBS; i++) {
801 struct snd_urb_ctx *u = &ep->urb[i];
802 u->index = i;
803 u->ep = ep;
804 u->packets = 1;
805 u->urb = usb_alloc_urb(1, GFP_KERNEL);
806 if (!u->urb)
807 goto out_of_memory;
808 u->urb->transfer_buffer = ep->syncbuf + i * 4;
809 u->urb->transfer_dma = ep->sync_dma + i * 4;
810 u->urb->transfer_buffer_length = 4;
811 u->urb->pipe = ep->pipe;
812 u->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
813 u->urb->number_of_packets = 1;
814 u->urb->interval = 1 << ep->syncinterval;
815 u->urb->context = u;
816 u->urb->complete = snd_complete_urb;
817 }
818
819 ep->nurbs = SYNC_URBS;
820
821 return 0;
822
823out_of_memory:
824 release_urbs(ep, 0);
825 return -ENOMEM;
826}
827
828/**
829 * snd_usb_endpoint_set_params: configure an snd_usb_endpoint
830 *
831 * @ep: the snd_usb_endpoint to configure
832 * @pcm_format: the audio fomat.
833 * @channels: the number of audio channels.
834 * @period_bytes: the number of bytes in one alsa period.
835 * @period_frames: the number of frames in one alsa period.
836 * @buffer_periods: the number of periods in one alsa buffer.
837 * @rate: the frame rate.
838 * @fmt: the USB audio format information
839 * @sync_ep: the sync endpoint to use, if any
840 *
841 * Determine the number of URBs to be used on this endpoint.
842 * An endpoint must be configured before it can be started.
843 * An endpoint that is already running can not be reconfigured.
844 */
845int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
846 snd_pcm_format_t pcm_format,
847 unsigned int channels,
848 unsigned int period_bytes,
849 unsigned int period_frames,
850 unsigned int buffer_periods,
851 unsigned int rate,
852 struct audioformat *fmt,
853 struct snd_usb_endpoint *sync_ep)
854{
855 int err;
856
857 if (ep->use_count != 0) {
858 usb_audio_warn(ep->chip,
859 "Unable to change format on ep #%x: already in use\n",
860 ep->ep_num);
861 return -EBUSY;
862 }
863
864 /* release old buffers, if any */
865 release_urbs(ep, 0);
866
867 ep->datainterval = fmt->datainterval;
868 ep->maxpacksize = fmt->maxpacksize;
869 ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
870
871 if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
872 ep->freqn = get_usb_full_speed_rate(rate);
873 else
874 ep->freqn = get_usb_high_speed_rate(rate);
875
876 /* calculate the frequency in 16.16 format */
877 ep->freqm = ep->freqn;
878 ep->freqshift = INT_MIN;
879
880 ep->phase = 0;
881
882 switch (ep->type) {
883 case SND_USB_ENDPOINT_TYPE_DATA:
884 err = data_ep_set_params(ep, pcm_format, channels,
885 period_bytes, period_frames,
886 buffer_periods, fmt, sync_ep);
887 break;
888 case SND_USB_ENDPOINT_TYPE_SYNC:
889 err = sync_ep_set_params(ep);
890 break;
891 default:
892 err = -EINVAL;
893 }
894
895 usb_audio_dbg(ep->chip,
896 "Setting params for ep #%x (type %d, %d urbs), ret=%d\n",
897 ep->ep_num, ep->type, ep->nurbs, err);
898
899 return err;
900}
901
902/**
903 * snd_usb_endpoint_start: start an snd_usb_endpoint
904 *
905 * @ep: the endpoint to start
906 * @can_sleep: flag indicating whether the operation is executed in
907 * non-atomic context
908 *
909 * A call to this function will increment the use count of the endpoint.
910 * In case it is not already running, the URBs for this endpoint will be
911 * submitted. Otherwise, this function does nothing.
912 *
913 * Must be balanced to calls of snd_usb_endpoint_stop().
914 *
915 * Returns an error if the URB submission failed, 0 in all other cases.
916 */
917int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, bool can_sleep)
918{
919 int err;
920 unsigned int i;
921
922 if (atomic_read(&ep->chip->shutdown))
923 return -EBADFD;
924
925 /* already running? */
926 if (++ep->use_count != 1)
927 return 0;
928
929 /* just to be sure */
930 deactivate_urbs(ep, false);
931 if (can_sleep)
932 wait_clear_urbs(ep);
933
934 ep->active_mask = 0;
935 ep->unlink_mask = 0;
936 ep->phase = 0;
937
938 snd_usb_endpoint_start_quirk(ep);
939
940 /*
941 * If this endpoint has a data endpoint as implicit feedback source,
942 * don't start the urbs here. Instead, mark them all as available,
943 * wait for the record urbs to return and queue the playback urbs
944 * from that context.
945 */
946
947 set_bit(EP_FLAG_RUNNING, &ep->flags);
948
949 if (snd_usb_endpoint_implicit_feedback_sink(ep)) {
950 for (i = 0; i < ep->nurbs; i++) {
951 struct snd_urb_ctx *ctx = ep->urb + i;
952 list_add_tail(&ctx->ready_list, &ep->ready_playback_urbs);
953 }
954
955 return 0;
956 }
957
958 for (i = 0; i < ep->nurbs; i++) {
959 struct urb *urb = ep->urb[i].urb;
960
961 if (snd_BUG_ON(!urb))
962 goto __error;
963
964 if (usb_pipeout(ep->pipe)) {
965 prepare_outbound_urb(ep, urb->context);
966 } else {
967 prepare_inbound_urb(ep, urb->context);
968 }
969
970 err = usb_submit_urb(urb, GFP_ATOMIC);
971 if (err < 0) {
972 usb_audio_err(ep->chip,
973 "cannot submit urb %d, error %d: %s\n",
974 i, err, usb_error_string(err));
975 goto __error;
976 }
977 set_bit(i, &ep->active_mask);
978 }
979
980 return 0;
981
982__error:
983 clear_bit(EP_FLAG_RUNNING, &ep->flags);
984 ep->use_count--;
985 deactivate_urbs(ep, false);
986 return -EPIPE;
987}
988
989/**
990 * snd_usb_endpoint_stop: stop an snd_usb_endpoint
991 *
992 * @ep: the endpoint to stop (may be NULL)
993 *
994 * A call to this function will decrement the use count of the endpoint.
995 * In case the last user has requested the endpoint stop, the URBs will
996 * actually be deactivated.
997 *
998 * Must be balanced to calls of snd_usb_endpoint_start().
999 *
1000 * The caller needs to synchronize the pending stop operation via
1001 * snd_usb_endpoint_sync_pending_stop().
1002 */
1003void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
1004{
1005 if (!ep)
1006 return;
1007
1008 if (snd_BUG_ON(ep->use_count == 0))
1009 return;
1010
1011 if (--ep->use_count == 0) {
1012 deactivate_urbs(ep, false);
1013 ep->data_subs = NULL;
1014 ep->sync_slave = NULL;
1015 ep->retire_data_urb = NULL;
1016 ep->prepare_data_urb = NULL;
1017 set_bit(EP_FLAG_STOPPING, &ep->flags);
1018 }
1019}
1020
1021/**
1022 * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
1023 *
1024 * @ep: the endpoint to deactivate
1025 *
1026 * If the endpoint is not currently in use, this functions will
1027 * deactivate its associated URBs.
1028 *
1029 * In case of any active users, this functions does nothing.
1030 */
1031void snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
1032{
1033 if (!ep)
1034 return;
1035
1036 if (ep->use_count != 0)
1037 return;
1038
1039 deactivate_urbs(ep, true);
1040 wait_clear_urbs(ep);
1041}
1042
1043/**
1044 * snd_usb_endpoint_release: Tear down an snd_usb_endpoint
1045 *
1046 * @ep: the endpoint to release
1047 *
1048 * This function does not care for the endpoint's use count but will tear
1049 * down all the streaming URBs immediately.
1050 */
1051void snd_usb_endpoint_release(struct snd_usb_endpoint *ep)
1052{
1053 release_urbs(ep, 1);
1054}
1055
1056/**
1057 * snd_usb_endpoint_free: Free the resources of an snd_usb_endpoint
1058 *
1059 * @ep: the endpoint to free
1060 *
1061 * This free all resources of the given ep.
1062 */
1063void snd_usb_endpoint_free(struct snd_usb_endpoint *ep)
1064{
1065 kfree(ep);
1066}
1067
1068/**
1069 * snd_usb_handle_sync_urb: parse an USB sync packet
1070 *
1071 * @ep: the endpoint to handle the packet
1072 * @sender: the sending endpoint
1073 * @urb: the received packet
1074 *
1075 * This function is called from the context of an endpoint that received
1076 * the packet and is used to let another endpoint object handle the payload.
1077 */
1078void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
1079 struct snd_usb_endpoint *sender,
1080 const struct urb *urb)
1081{
1082 int shift;
1083 unsigned int f;
1084 unsigned long flags;
1085
1086 snd_BUG_ON(ep == sender);
1087
1088 /*
1089 * In case the endpoint is operating in implicit feedback mode, prepare
1090 * a new outbound URB that has the same layout as the received packet
1091 * and add it to the list of pending urbs. queue_pending_output_urbs()
1092 * will take care of them later.
1093 */
1094 if (snd_usb_endpoint_implicit_feedback_sink(ep) &&
1095 ep->use_count != 0) {
1096
1097 /* implicit feedback case */
1098 int i, bytes = 0;
1099 struct snd_urb_ctx *in_ctx;
1100 struct snd_usb_packet_info *out_packet;
1101
1102 in_ctx = urb->context;
1103
1104 /* Count overall packet size */
1105 for (i = 0; i < in_ctx->packets; i++)
1106 if (urb->iso_frame_desc[i].status == 0)
1107 bytes += urb->iso_frame_desc[i].actual_length;
1108
1109 /*
1110 * skip empty packets. At least M-Audio's Fast Track Ultra stops
1111 * streaming once it received a 0-byte OUT URB
1112 */
1113 if (bytes == 0)
1114 return;
1115
1116 spin_lock_irqsave(&ep->lock, flags);
1117 out_packet = ep->next_packet + ep->next_packet_write_pos;
1118
1119 /*
1120 * Iterate through the inbound packet and prepare the lengths
1121 * for the output packet. The OUT packet we are about to send
1122 * will have the same amount of payload bytes per stride as the
1123 * IN packet we just received. Since the actual size is scaled
1124 * by the stride, use the sender stride to calculate the length
1125 * in case the number of channels differ between the implicitly
1126 * fed-back endpoint and the synchronizing endpoint.
1127 */
1128
1129 out_packet->packets = in_ctx->packets;
1130 for (i = 0; i < in_ctx->packets; i++) {
1131 if (urb->iso_frame_desc[i].status == 0)
1132 out_packet->packet_size[i] =
1133 urb->iso_frame_desc[i].actual_length / sender->stride;
1134 else
1135 out_packet->packet_size[i] = 0;
1136 }
1137
1138 ep->next_packet_write_pos++;
1139 ep->next_packet_write_pos %= MAX_URBS;
1140 spin_unlock_irqrestore(&ep->lock, flags);
1141 queue_pending_output_urbs(ep);
1142
1143 return;
1144 }
1145
1146 /*
1147 * process after playback sync complete
1148 *
1149 * Full speed devices report feedback values in 10.14 format as samples
1150 * per frame, high speed devices in 16.16 format as samples per
1151 * microframe.
1152 *
1153 * Because the Audio Class 1 spec was written before USB 2.0, many high
1154 * speed devices use a wrong interpretation, some others use an
1155 * entirely different format.
1156 *
1157 * Therefore, we cannot predict what format any particular device uses
1158 * and must detect it automatically.
1159 */
1160
1161 if (urb->iso_frame_desc[0].status != 0 ||
1162 urb->iso_frame_desc[0].actual_length < 3)
1163 return;
1164
1165 f = le32_to_cpup(urb->transfer_buffer);
1166 if (urb->iso_frame_desc[0].actual_length == 3)
1167 f &= 0x00ffffff;
1168 else
1169 f &= 0x0fffffff;
1170
1171 if (f == 0)
1172 return;
1173
1174 if (unlikely(sender->udh01_fb_quirk)) {
1175 /*
1176 * The TEAC UD-H01 firmware sometimes changes the feedback value
1177 * by +/- 0x1.0000.
1178 */
1179 if (f < ep->freqn - 0x8000)
1180 f += 0x10000;
1181 else if (f > ep->freqn + 0x8000)
1182 f -= 0x10000;
1183 } else if (unlikely(ep->freqshift == INT_MIN)) {
1184 /*
1185 * The first time we see a feedback value, determine its format
1186 * by shifting it left or right until it matches the nominal
1187 * frequency value. This assumes that the feedback does not
1188 * differ from the nominal value more than +50% or -25%.
1189 */
1190 shift = 0;
1191 while (f < ep->freqn - ep->freqn / 4) {
1192 f <<= 1;
1193 shift++;
1194 }
1195 while (f > ep->freqn + ep->freqn / 2) {
1196 f >>= 1;
1197 shift--;
1198 }
1199 ep->freqshift = shift;
1200 } else if (ep->freqshift >= 0)
1201 f <<= ep->freqshift;
1202 else
1203 f >>= -ep->freqshift;
1204
1205 if (likely(f >= ep->freqn - ep->freqn / 8 && f <= ep->freqmax)) {
1206 /*
1207 * If the frequency looks valid, set it.
1208 * This value is referred to in prepare_playback_urb().
1209 */
1210 spin_lock_irqsave(&ep->lock, flags);
1211 ep->freqm = f;
1212 spin_unlock_irqrestore(&ep->lock, flags);
1213 } else {
1214 /*
1215 * Out of range; maybe the shift value is wrong.
1216 * Reset it so that we autodetect again the next time.
1217 */
1218 ep->freqshift = INT_MIN;
1219 }
1220}
1221