Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * core.c - ChipIdea USB IP core family device controller
   4 *
   5 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
   6 *
   7 * Author: David Lopo
   8 */
   9
  10/*
  11 * Description: ChipIdea USB IP core family device controller
  12 *
  13 * This driver is composed of several blocks:
  14 * - HW:     hardware interface
  15 * - DBG:    debug facilities (optional)
  16 * - UTIL:   utilities
  17 * - ISR:    interrupts handling
  18 * - ENDPT:  endpoint operations (Gadget API)
  19 * - GADGET: gadget operations (Gadget API)
  20 * - BUS:    bus glue code, bus abstraction layer
  21 *
  22 * Compile Options
  23 * - STALL_IN:  non-empty bulk-in pipes cannot be halted
  24 *              if defined mass storage compliance succeeds but with warnings
  25 *              => case 4: Hi >  Dn
  26 *              => case 5: Hi >  Di
  27 *              => case 8: Hi <> Do
  28 *              if undefined usbtest 13 fails
  29 * - TRACE:     enable function tracing (depends on DEBUG)
  30 *
  31 * Main Features
  32 * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
  33 * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
  34 * - Normal & LPM support
  35 *
  36 * USBTEST Report
  37 * - OK: 0-12, 13 (STALL_IN defined) & 14
  38 * - Not Supported: 15 & 16 (ISO)
  39 *
  40 * TODO List
  41 * - Suspend & Remote Wakeup
  42 */
  43#include <linux/delay.h>
  44#include <linux/device.h>
  45#include <linux/dma-mapping.h>
  46#include <linux/extcon.h>
  47#include <linux/phy/phy.h>
  48#include <linux/platform_device.h>
  49#include <linux/module.h>
  50#include <linux/idr.h>
  51#include <linux/interrupt.h>
  52#include <linux/io.h>
  53#include <linux/kernel.h>
  54#include <linux/slab.h>
  55#include <linux/pm_runtime.h>
  56#include <linux/pinctrl/consumer.h>
  57#include <linux/usb/ch9.h>
  58#include <linux/usb/gadget.h>
  59#include <linux/usb/otg.h>
  60#include <linux/usb/chipidea.h>
  61#include <linux/usb/of.h>
  62#include <linux/of.h>
  63#include <linux/regulator/consumer.h>
  64#include <linux/usb/ehci_def.h>
  65
  66#include "ci.h"
  67#include "udc.h"
  68#include "bits.h"
  69#include "host.h"
  70#include "otg.h"
  71#include "otg_fsm.h"
  72
  73/* Controller register map */
  74static const u8 ci_regs_nolpm[] = {
  75	[CAP_CAPLENGTH]		= 0x00U,
  76	[CAP_HCCPARAMS]		= 0x08U,
  77	[CAP_DCCPARAMS]		= 0x24U,
  78	[CAP_TESTMODE]		= 0x38U,
  79	[OP_USBCMD]		= 0x00U,
  80	[OP_USBSTS]		= 0x04U,
  81	[OP_USBINTR]		= 0x08U,
  82	[OP_DEVICEADDR]		= 0x14U,
  83	[OP_ENDPTLISTADDR]	= 0x18U,
  84	[OP_TTCTRL]		= 0x1CU,
  85	[OP_BURSTSIZE]		= 0x20U,
  86	[OP_ULPI_VIEWPORT]	= 0x30U,
  87	[OP_PORTSC]		= 0x44U,
  88	[OP_DEVLC]		= 0x84U,
  89	[OP_OTGSC]		= 0x64U,
  90	[OP_USBMODE]		= 0x68U,
  91	[OP_ENDPTSETUPSTAT]	= 0x6CU,
  92	[OP_ENDPTPRIME]		= 0x70U,
  93	[OP_ENDPTFLUSH]		= 0x74U,
  94	[OP_ENDPTSTAT]		= 0x78U,
  95	[OP_ENDPTCOMPLETE]	= 0x7CU,
  96	[OP_ENDPTCTRL]		= 0x80U,
  97};
  98
  99static const u8 ci_regs_lpm[] = {
 100	[CAP_CAPLENGTH]		= 0x00U,
 101	[CAP_HCCPARAMS]		= 0x08U,
 102	[CAP_DCCPARAMS]		= 0x24U,
 103	[CAP_TESTMODE]		= 0xFCU,
 104	[OP_USBCMD]		= 0x00U,
 105	[OP_USBSTS]		= 0x04U,
 106	[OP_USBINTR]		= 0x08U,
 107	[OP_DEVICEADDR]		= 0x14U,
 108	[OP_ENDPTLISTADDR]	= 0x18U,
 109	[OP_TTCTRL]		= 0x1CU,
 110	[OP_BURSTSIZE]		= 0x20U,
 111	[OP_ULPI_VIEWPORT]	= 0x30U,
 112	[OP_PORTSC]		= 0x44U,
 113	[OP_DEVLC]		= 0x84U,
 114	[OP_OTGSC]		= 0xC4U,
 115	[OP_USBMODE]		= 0xC8U,
 116	[OP_ENDPTSETUPSTAT]	= 0xD8U,
 117	[OP_ENDPTPRIME]		= 0xDCU,
 118	[OP_ENDPTFLUSH]		= 0xE0U,
 119	[OP_ENDPTSTAT]		= 0xE4U,
 120	[OP_ENDPTCOMPLETE]	= 0xE8U,
 121	[OP_ENDPTCTRL]		= 0xECU,
 122};
 123
 124static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
 125{
 126	int i;
 127
 128	for (i = 0; i < OP_ENDPTCTRL; i++)
 129		ci->hw_bank.regmap[i] =
 130			(i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
 131			(is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
 132
 133	for (; i <= OP_LAST; i++)
 134		ci->hw_bank.regmap[i] = ci->hw_bank.op +
 135			4 * (i - OP_ENDPTCTRL) +
 136			(is_lpm
 137			 ? ci_regs_lpm[OP_ENDPTCTRL]
 138			 : ci_regs_nolpm[OP_ENDPTCTRL]);
 139
 140}
 141
 142static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
 143{
 144	int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
 145	enum ci_revision rev = CI_REVISION_UNKNOWN;
 146
 147	if (ver == 0x2) {
 148		rev = hw_read_id_reg(ci, ID_ID, REVISION)
 149			>> __ffs(REVISION);
 150		rev += CI_REVISION_20;
 151	} else if (ver == 0x0) {
 152		rev = CI_REVISION_1X;
 153	}
 154
 155	return rev;
 156}
 157
 158/**
 159 * hw_read_intr_enable: returns interrupt enable register
 160 *
 161 * @ci: the controller
 162 *
 163 * This function returns register data
 164 */
 165u32 hw_read_intr_enable(struct ci_hdrc *ci)
 166{
 167	return hw_read(ci, OP_USBINTR, ~0);
 168}
 169
 170/**
 171 * hw_read_intr_status: returns interrupt status register
 172 *
 173 * @ci: the controller
 174 *
 175 * This function returns register data
 176 */
 177u32 hw_read_intr_status(struct ci_hdrc *ci)
 178{
 179	return hw_read(ci, OP_USBSTS, ~0);
 180}
 181
 182/**
 183 * hw_port_test_set: writes port test mode (execute without interruption)
 184 * @mode: new value
 185 *
 186 * This function returns an error code
 187 */
 188int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
 189{
 190	const u8 TEST_MODE_MAX = 7;
 191
 192	if (mode > TEST_MODE_MAX)
 193		return -EINVAL;
 194
 195	hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
 196	return 0;
 197}
 198
 199/**
 200 * hw_port_test_get: reads port test mode value
 201 *
 202 * @ci: the controller
 203 *
 204 * This function returns port test mode value
 205 */
 206u8 hw_port_test_get(struct ci_hdrc *ci)
 207{
 208	return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
 209}
 210
 211static void hw_wait_phy_stable(void)
 212{
 213	/*
 214	 * The phy needs some delay to output the stable status from low
 215	 * power mode. And for OTGSC, the status inputs are debounced
 216	 * using a 1 ms time constant, so, delay 2ms for controller to get
 217	 * the stable status, like vbus and id when the phy leaves low power.
 218	 */
 219	usleep_range(2000, 2500);
 220}
 221
 222/* The PHY enters/leaves low power mode */
 223static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
 224{
 225	enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
 226	bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
 227
 228	if (enable && !lpm)
 229		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
 230				PORTSC_PHCD(ci->hw_bank.lpm));
 231	else if (!enable && lpm)
 232		hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
 233				0);
 234}
 235
 236static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 237{
 238	u32 reg;
 239
 240	/* bank is a module variable */
 241	ci->hw_bank.abs = base;
 242
 243	ci->hw_bank.cap = ci->hw_bank.abs;
 244	ci->hw_bank.cap += ci->platdata->capoffset;
 245	ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
 246
 247	hw_alloc_regmap(ci, false);
 248	reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
 249		__ffs(HCCPARAMS_LEN);
 250	ci->hw_bank.lpm  = reg;
 251	if (reg)
 252		hw_alloc_regmap(ci, !!reg);
 253	ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
 254	ci->hw_bank.size += OP_LAST;
 255	ci->hw_bank.size /= sizeof(u32);
 256
 257	reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
 258		__ffs(DCCPARAMS_DEN);
 259	ci->hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
 260
 261	if (ci->hw_ep_max > ENDPT_MAX)
 262		return -ENODEV;
 263
 264	ci_hdrc_enter_lpm(ci, false);
 265
 266	/* Disable all interrupts bits */
 267	hw_write(ci, OP_USBINTR, 0xffffffff, 0);
 268
 269	/* Clear all interrupts status bits*/
 270	hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
 271
 272	ci->rev = ci_get_revision(ci);
 273
 274	dev_dbg(ci->dev,
 275		"ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
 276		ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 277
 278	/* setup lock mode ? */
 279
 280	/* ENDPTSETUPSTAT is '0' by default */
 281
 282	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
 283
 284	return 0;
 285}
 286
 287void hw_phymode_configure(struct ci_hdrc *ci)
 288{
 289	u32 portsc, lpm, sts = 0;
 290
 291	switch (ci->platdata->phy_mode) {
 292	case USBPHY_INTERFACE_MODE_UTMI:
 293		portsc = PORTSC_PTS(PTS_UTMI);
 294		lpm = DEVLC_PTS(PTS_UTMI);
 295		break;
 296	case USBPHY_INTERFACE_MODE_UTMIW:
 297		portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
 298		lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
 299		break;
 300	case USBPHY_INTERFACE_MODE_ULPI:
 301		portsc = PORTSC_PTS(PTS_ULPI);
 302		lpm = DEVLC_PTS(PTS_ULPI);
 303		break;
 304	case USBPHY_INTERFACE_MODE_SERIAL:
 305		portsc = PORTSC_PTS(PTS_SERIAL);
 306		lpm = DEVLC_PTS(PTS_SERIAL);
 307		sts = 1;
 308		break;
 309	case USBPHY_INTERFACE_MODE_HSIC:
 310		portsc = PORTSC_PTS(PTS_HSIC);
 311		lpm = DEVLC_PTS(PTS_HSIC);
 312		break;
 313	default:
 314		return;
 315	}
 316
 317	if (ci->hw_bank.lpm) {
 318		hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
 319		if (sts)
 320			hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
 321	} else {
 322		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
 323		if (sts)
 324			hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
 325	}
 326}
 327EXPORT_SYMBOL_GPL(hw_phymode_configure);
 328
 329/**
 330 * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
 331 * interfaces
 332 * @ci: the controller
 333 *
 334 * This function returns an error code if the phy failed to init
 335 */
 336static int _ci_usb_phy_init(struct ci_hdrc *ci)
 337{
 338	int ret;
 339
 340	if (ci->phy) {
 341		ret = phy_init(ci->phy);
 342		if (ret)
 343			return ret;
 344
 345		ret = phy_power_on(ci->phy);
 346		if (ret) {
 347			phy_exit(ci->phy);
 348			return ret;
 349		}
 350	} else {
 351		ret = usb_phy_init(ci->usb_phy);
 352	}
 353
 354	return ret;
 355}
 356
 357/**
 358 * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
 359 * interfaces
 360 * @ci: the controller
 361 */
 362static void ci_usb_phy_exit(struct ci_hdrc *ci)
 363{
 364	if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
 365		return;
 366
 367	if (ci->phy) {
 368		phy_power_off(ci->phy);
 369		phy_exit(ci->phy);
 370	} else {
 371		usb_phy_shutdown(ci->usb_phy);
 372	}
 373}
 374
 375/**
 376 * ci_usb_phy_init: initialize phy according to different phy type
 377 * @ci: the controller
 378 *
 379 * This function returns an error code if usb_phy_init has failed
 380 */
 381static int ci_usb_phy_init(struct ci_hdrc *ci)
 382{
 383	int ret;
 384
 385	if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
 386		return 0;
 387
 388	switch (ci->platdata->phy_mode) {
 389	case USBPHY_INTERFACE_MODE_UTMI:
 390	case USBPHY_INTERFACE_MODE_UTMIW:
 391	case USBPHY_INTERFACE_MODE_HSIC:
 392		ret = _ci_usb_phy_init(ci);
 393		if (!ret)
 394			hw_wait_phy_stable();
 395		else
 396			return ret;
 397		hw_phymode_configure(ci);
 398		break;
 399	case USBPHY_INTERFACE_MODE_ULPI:
 400	case USBPHY_INTERFACE_MODE_SERIAL:
 401		hw_phymode_configure(ci);
 402		ret = _ci_usb_phy_init(ci);
 403		if (ret)
 404			return ret;
 405		break;
 406	default:
 407		ret = _ci_usb_phy_init(ci);
 408		if (!ret)
 409			hw_wait_phy_stable();
 410	}
 411
 412	return ret;
 413}
 414
 415
 416/**
 417 * ci_platform_configure: do controller configure
 418 * @ci: the controller
 419 *
 420 */
 421void ci_platform_configure(struct ci_hdrc *ci)
 422{
 423	bool is_device_mode, is_host_mode;
 424
 425	is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
 426	is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
 427
 428	if (is_device_mode) {
 429		phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE);
 430
 431		if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)
 432			hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
 433				 USBMODE_CI_SDIS);
 434	}
 435
 436	if (is_host_mode) {
 437		phy_set_mode(ci->phy, PHY_MODE_USB_HOST);
 438
 439		if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)
 440			hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
 441				 USBMODE_CI_SDIS);
 442	}
 443
 444	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
 445		if (ci->hw_bank.lpm)
 446			hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
 447		else
 448			hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
 449	}
 450
 451	if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
 452		hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
 453
 454	hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
 455
 456	if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
 457		hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
 458			ci->platdata->ahb_burst_config);
 459
 460	/* override burst size, take effect only when ahb_burst_config is 0 */
 461	if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
 462		if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
 463			hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
 464			ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
 465
 466		if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
 467			hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
 468				ci->platdata->rx_burst_size);
 469	}
 470}
 471
 472/**
 473 * hw_controller_reset: do controller reset
 474 * @ci: the controller
 475  *
 476 * This function returns an error code
 477 */
 478static int hw_controller_reset(struct ci_hdrc *ci)
 479{
 480	int count = 0;
 481
 482	hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
 483	while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
 484		udelay(10);
 485		if (count++ > 1000)
 486			return -ETIMEDOUT;
 487	}
 488
 489	return 0;
 490}
 491
 492/**
 493 * hw_device_reset: resets chip (execute without interruption)
 494 * @ci: the controller
 495 *
 496 * This function returns an error code
 497 */
 498int hw_device_reset(struct ci_hdrc *ci)
 499{
 500	int ret;
 501
 502	/* should flush & stop before reset */
 503	hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
 504	hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 505
 506	ret = hw_controller_reset(ci);
 507	if (ret) {
 508		dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
 509		return ret;
 510	}
 511
 512	if (ci->platdata->notify_event) {
 513		ret = ci->platdata->notify_event(ci,
 514			CI_HDRC_CONTROLLER_RESET_EVENT);
 515		if (ret)
 516			return ret;
 517	}
 518
 519	/* USBMODE should be configured step by step */
 520	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
 521	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
 522	/* HW >= 2.3 */
 523	hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
 524
 525	if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
 526		dev_err(ci->dev, "cannot enter in %s device mode\n",
 527			ci_role(ci)->name);
 528		dev_err(ci->dev, "lpm = %i\n", ci->hw_bank.lpm);
 529		return -ENODEV;
 530	}
 531
 532	ci_platform_configure(ci);
 533
 534	return 0;
 535}
 536
 537static irqreturn_t ci_irq(int irq, void *data)
 538{
 539	struct ci_hdrc *ci = data;
 540	irqreturn_t ret = IRQ_NONE;
 541	u32 otgsc = 0;
 542
 543	if (ci->in_lpm) {
 544		disable_irq_nosync(irq);
 545		ci->wakeup_int = true;
 546		pm_runtime_get(ci->dev);
 547		return IRQ_HANDLED;
 548	}
 549
 550	if (ci->is_otg) {
 551		otgsc = hw_read_otgsc(ci, ~0);
 552		if (ci_otg_is_fsm_mode(ci)) {
 553			ret = ci_otg_fsm_irq(ci);
 554			if (ret == IRQ_HANDLED)
 555				return ret;
 556		}
 557	}
 558
 559	/*
 560	 * Handle id change interrupt, it indicates device/host function
 561	 * switch.
 562	 */
 563	if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
 564		ci->id_event = true;
 565		/* Clear ID change irq status */
 566		hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
 567		ci_otg_queue_work(ci);
 568		return IRQ_HANDLED;
 569	}
 570
 571	/*
 572	 * Handle vbus change interrupt, it indicates device connection
 573	 * and disconnection events.
 574	 */
 575	if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
 576		ci->b_sess_valid_event = true;
 577		/* Clear BSV irq */
 578		hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
 579		ci_otg_queue_work(ci);
 580		return IRQ_HANDLED;
 581	}
 582
 583	/* Handle device/host interrupt */
 584	if (ci->role != CI_ROLE_END)
 585		ret = ci_role(ci)->irq(ci);
 586
 587	return ret;
 588}
 589
 590static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
 591			     void *ptr)
 592{
 593	struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
 594	struct ci_hdrc *ci = cbl->ci;
 595
 596	cbl->connected = event;
 597	cbl->changed = true;
 598
 599	ci_irq(ci->irq, ci);
 600	return NOTIFY_DONE;
 601}
 602
 603static enum usb_role ci_usb_role_switch_get(struct device *dev)
 604{
 605	struct ci_hdrc *ci = dev_get_drvdata(dev);
 606	enum usb_role role;
 607	unsigned long flags;
 608
 609	spin_lock_irqsave(&ci->lock, flags);
 610	role = ci_role_to_usb_role(ci);
 611	spin_unlock_irqrestore(&ci->lock, flags);
 612
 613	return role;
 614}
 615
 616static int ci_usb_role_switch_set(struct device *dev, enum usb_role role)
 617{
 618	struct ci_hdrc *ci = dev_get_drvdata(dev);
 619	struct ci_hdrc_cable *cable = NULL;
 620	enum usb_role current_role = ci_role_to_usb_role(ci);
 621	unsigned long flags;
 622
 623	if (current_role == role)
 624		return 0;
 625
 626	pm_runtime_get_sync(ci->dev);
 627	/* Stop current role */
 628	spin_lock_irqsave(&ci->lock, flags);
 629	if (current_role == USB_ROLE_DEVICE)
 630		cable = &ci->platdata->vbus_extcon;
 631	else if (current_role == USB_ROLE_HOST)
 632		cable = &ci->platdata->id_extcon;
 633
 634	if (cable) {
 635		cable->changed = true;
 636		cable->connected = false;
 637		ci_irq(ci->irq, ci);
 638		spin_unlock_irqrestore(&ci->lock, flags);
 639		if (ci->wq && role != USB_ROLE_NONE)
 640			flush_workqueue(ci->wq);
 641		spin_lock_irqsave(&ci->lock, flags);
 642	}
 643
 644	cable = NULL;
 645
 646	/* Start target role */
 647	if (role == USB_ROLE_DEVICE)
 648		cable = &ci->platdata->vbus_extcon;
 649	else if (role == USB_ROLE_HOST)
 650		cable = &ci->platdata->id_extcon;
 651
 652	if (cable) {
 653		cable->changed = true;
 654		cable->connected = true;
 655		ci_irq(ci->irq, ci);
 656	}
 657	spin_unlock_irqrestore(&ci->lock, flags);
 658	pm_runtime_put_sync(ci->dev);
 659
 660	return 0;
 661}
 662
 663static struct usb_role_switch_desc ci_role_switch = {
 664	.set = ci_usb_role_switch_set,
 665	.get = ci_usb_role_switch_get,
 666};
 667
 668static int ci_get_platdata(struct device *dev,
 669		struct ci_hdrc_platform_data *platdata)
 670{
 671	struct extcon_dev *ext_vbus, *ext_id;
 672	struct ci_hdrc_cable *cable;
 673	int ret;
 674
 675	if (!platdata->phy_mode)
 676		platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
 677
 678	if (!platdata->dr_mode)
 679		platdata->dr_mode = usb_get_dr_mode(dev);
 680
 681	if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
 682		platdata->dr_mode = USB_DR_MODE_OTG;
 683
 684	if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
 685		/* Get the vbus regulator */
 686		platdata->reg_vbus = devm_regulator_get(dev, "vbus");
 687		if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
 688			return -EPROBE_DEFER;
 689		} else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
 690			/* no vbus regulator is needed */
 691			platdata->reg_vbus = NULL;
 692		} else if (IS_ERR(platdata->reg_vbus)) {
 693			dev_err(dev, "Getting regulator error: %ld\n",
 694				PTR_ERR(platdata->reg_vbus));
 695			return PTR_ERR(platdata->reg_vbus);
 696		}
 697		/* Get TPL support */
 698		if (!platdata->tpl_support)
 699			platdata->tpl_support =
 700				of_usb_host_tpl_support(dev->of_node);
 701	}
 702
 703	if (platdata->dr_mode == USB_DR_MODE_OTG) {
 704		/* We can support HNP and SRP of OTG 2.0 */
 705		platdata->ci_otg_caps.otg_rev = 0x0200;
 706		platdata->ci_otg_caps.hnp_support = true;
 707		platdata->ci_otg_caps.srp_support = true;
 708
 709		/* Update otg capabilities by DT properties */
 710		ret = of_usb_update_otg_caps(dev->of_node,
 711					&platdata->ci_otg_caps);
 712		if (ret)
 713			return ret;
 714	}
 715
 716	if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
 717		platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
 718
 719	of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
 720				     &platdata->phy_clkgate_delay_us);
 721
 722	platdata->itc_setting = 1;
 723
 724	of_property_read_u32(dev->of_node, "itc-setting",
 725					&platdata->itc_setting);
 726
 727	ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
 728				&platdata->ahb_burst_config);
 729	if (!ret) {
 730		platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
 731	} else if (ret != -EINVAL) {
 732		dev_err(dev, "failed to get ahb-burst-config\n");
 733		return ret;
 734	}
 735
 736	ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
 737				&platdata->tx_burst_size);
 738	if (!ret) {
 739		platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
 740	} else if (ret != -EINVAL) {
 741		dev_err(dev, "failed to get tx-burst-size-dword\n");
 742		return ret;
 743	}
 744
 745	ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
 746				&platdata->rx_burst_size);
 747	if (!ret) {
 748		platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
 749	} else if (ret != -EINVAL) {
 750		dev_err(dev, "failed to get rx-burst-size-dword\n");
 751		return ret;
 752	}
 753
 754	if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
 755		platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
 756
 757	ext_id = ERR_PTR(-ENODEV);
 758	ext_vbus = ERR_PTR(-ENODEV);
 759	if (of_property_read_bool(dev->of_node, "extcon")) {
 760		/* Each one of them is not mandatory */
 761		ext_vbus = extcon_get_edev_by_phandle(dev, 0);
 762		if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
 763			return PTR_ERR(ext_vbus);
 764
 765		ext_id = extcon_get_edev_by_phandle(dev, 1);
 766		if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
 767			return PTR_ERR(ext_id);
 768	}
 769
 770	cable = &platdata->vbus_extcon;
 771	cable->nb.notifier_call = ci_cable_notifier;
 772	cable->edev = ext_vbus;
 773
 774	if (!IS_ERR(ext_vbus)) {
 775		ret = extcon_get_state(cable->edev, EXTCON_USB);
 776		if (ret)
 777			cable->connected = true;
 778		else
 779			cable->connected = false;
 780	}
 781
 782	cable = &platdata->id_extcon;
 783	cable->nb.notifier_call = ci_cable_notifier;
 784	cable->edev = ext_id;
 785
 786	if (!IS_ERR(ext_id)) {
 787		ret = extcon_get_state(cable->edev, EXTCON_USB_HOST);
 788		if (ret)
 789			cable->connected = true;
 790		else
 791			cable->connected = false;
 792	}
 793
 794	if (device_property_read_bool(dev, "usb-role-switch"))
 795		ci_role_switch.fwnode = dev->fwnode;
 796
 797	platdata->pctl = devm_pinctrl_get(dev);
 798	if (!IS_ERR(platdata->pctl)) {
 799		struct pinctrl_state *p;
 800
 801		p = pinctrl_lookup_state(platdata->pctl, "default");
 802		if (!IS_ERR(p))
 803			platdata->pins_default = p;
 804
 805		p = pinctrl_lookup_state(platdata->pctl, "host");
 806		if (!IS_ERR(p))
 807			platdata->pins_host = p;
 808
 809		p = pinctrl_lookup_state(platdata->pctl, "device");
 810		if (!IS_ERR(p))
 811			platdata->pins_device = p;
 812	}
 813
 814	return 0;
 815}
 816
 817static int ci_extcon_register(struct ci_hdrc *ci)
 818{
 819	struct ci_hdrc_cable *id, *vbus;
 820	int ret;
 821
 822	id = &ci->platdata->id_extcon;
 823	id->ci = ci;
 824	if (!IS_ERR_OR_NULL(id->edev)) {
 825		ret = devm_extcon_register_notifier(ci->dev, id->edev,
 826						EXTCON_USB_HOST, &id->nb);
 827		if (ret < 0) {
 828			dev_err(ci->dev, "register ID failed\n");
 829			return ret;
 830		}
 831	}
 832
 833	vbus = &ci->platdata->vbus_extcon;
 834	vbus->ci = ci;
 835	if (!IS_ERR_OR_NULL(vbus->edev)) {
 836		ret = devm_extcon_register_notifier(ci->dev, vbus->edev,
 837						EXTCON_USB, &vbus->nb);
 838		if (ret < 0) {
 839			dev_err(ci->dev, "register VBUS failed\n");
 840			return ret;
 841		}
 842	}
 843
 844	return 0;
 845}
 846
 847static DEFINE_IDA(ci_ida);
 848
 849struct platform_device *ci_hdrc_add_device(struct device *dev,
 850			struct resource *res, int nres,
 851			struct ci_hdrc_platform_data *platdata)
 852{
 853	struct platform_device *pdev;
 854	int id, ret;
 855
 856	ret = ci_get_platdata(dev, platdata);
 857	if (ret)
 858		return ERR_PTR(ret);
 859
 860	id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
 861	if (id < 0)
 862		return ERR_PTR(id);
 863
 864	pdev = platform_device_alloc("ci_hdrc", id);
 865	if (!pdev) {
 866		ret = -ENOMEM;
 867		goto put_id;
 868	}
 869
 870	pdev->dev.parent = dev;
 871
 872	ret = platform_device_add_resources(pdev, res, nres);
 873	if (ret)
 874		goto err;
 875
 876	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
 877	if (ret)
 878		goto err;
 879
 880	ret = platform_device_add(pdev);
 881	if (ret)
 882		goto err;
 883
 884	return pdev;
 885
 886err:
 887	platform_device_put(pdev);
 888put_id:
 889	ida_simple_remove(&ci_ida, id);
 890	return ERR_PTR(ret);
 891}
 892EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
 893
 894void ci_hdrc_remove_device(struct platform_device *pdev)
 895{
 896	int id = pdev->id;
 897	platform_device_unregister(pdev);
 898	ida_simple_remove(&ci_ida, id);
 899}
 900EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
 901
 902static inline void ci_role_destroy(struct ci_hdrc *ci)
 903{
 904	ci_hdrc_gadget_destroy(ci);
 905	ci_hdrc_host_destroy(ci);
 906	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
 907		ci_hdrc_otg_destroy(ci);
 908}
 909
 910static void ci_get_otg_capable(struct ci_hdrc *ci)
 911{
 912	if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
 913		ci->is_otg = false;
 914	else
 915		ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
 916				DCCPARAMS_DC | DCCPARAMS_HC)
 917					== (DCCPARAMS_DC | DCCPARAMS_HC));
 918	if (ci->is_otg) {
 919		dev_dbg(ci->dev, "It is OTG capable controller\n");
 920		/* Disable and clear all OTG irq */
 921		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
 922							OTGSC_INT_STATUS_BITS);
 923	}
 924}
 925
 926static ssize_t role_show(struct device *dev, struct device_attribute *attr,
 927			  char *buf)
 928{
 929	struct ci_hdrc *ci = dev_get_drvdata(dev);
 930
 931	if (ci->role != CI_ROLE_END)
 932		return sprintf(buf, "%s\n", ci_role(ci)->name);
 933
 934	return 0;
 935}
 936
 937static ssize_t role_store(struct device *dev,
 938		struct device_attribute *attr, const char *buf, size_t n)
 939{
 940	struct ci_hdrc *ci = dev_get_drvdata(dev);
 941	enum ci_role role;
 942	int ret;
 943
 944	if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) {
 945		dev_warn(dev, "Current configuration is not dual-role, quit\n");
 946		return -EPERM;
 947	}
 948
 949	for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++)
 950		if (!strncmp(buf, ci->roles[role]->name,
 951			     strlen(ci->roles[role]->name)))
 952			break;
 953
 954	if (role == CI_ROLE_END || role == ci->role)
 955		return -EINVAL;
 956
 957	pm_runtime_get_sync(dev);
 958	disable_irq(ci->irq);
 959	ci_role_stop(ci);
 960	ret = ci_role_start(ci, role);
 961	if (!ret && ci->role == CI_ROLE_GADGET)
 962		ci_handle_vbus_change(ci);
 963	enable_irq(ci->irq);
 964	pm_runtime_put_sync(dev);
 965
 966	return (ret == 0) ? n : ret;
 967}
 968static DEVICE_ATTR_RW(role);
 969
 970static struct attribute *ci_attrs[] = {
 971	&dev_attr_role.attr,
 972	NULL,
 973};
 974ATTRIBUTE_GROUPS(ci);
 975
 976static int ci_hdrc_probe(struct platform_device *pdev)
 977{
 978	struct device	*dev = &pdev->dev;
 979	struct ci_hdrc	*ci;
 980	struct resource	*res;
 981	void __iomem	*base;
 982	int		ret;
 983	enum usb_dr_mode dr_mode;
 984
 985	if (!dev_get_platdata(dev)) {
 986		dev_err(dev, "platform data missing\n");
 987		return -ENODEV;
 988	}
 989
 990	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 991	base = devm_ioremap_resource(dev, res);
 992	if (IS_ERR(base))
 993		return PTR_ERR(base);
 994
 995	ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
 996	if (!ci)
 997		return -ENOMEM;
 998
 999	spin_lock_init(&ci->lock);
1000	ci->dev = dev;
1001	ci->platdata = dev_get_platdata(dev);
1002	ci->imx28_write_fix = !!(ci->platdata->flags &
1003		CI_HDRC_IMX28_WRITE_FIX);
1004	ci->supports_runtime_pm = !!(ci->platdata->flags &
1005		CI_HDRC_SUPPORTS_RUNTIME_PM);
1006	platform_set_drvdata(pdev, ci);
1007
1008	ret = hw_device_init(ci, base);
1009	if (ret < 0) {
1010		dev_err(dev, "can't initialize hardware\n");
1011		return -ENODEV;
1012	}
1013
1014	ret = ci_ulpi_init(ci);
1015	if (ret)
1016		return ret;
1017
1018	if (ci->platdata->phy) {
1019		ci->phy = ci->platdata->phy;
1020	} else if (ci->platdata->usb_phy) {
1021		ci->usb_phy = ci->platdata->usb_phy;
1022	} else {
1023		/* Look for a generic PHY first */
1024		ci->phy = devm_phy_get(dev->parent, "usb-phy");
1025
1026		if (PTR_ERR(ci->phy) == -EPROBE_DEFER) {
1027			ret = -EPROBE_DEFER;
1028			goto ulpi_exit;
1029		} else if (IS_ERR(ci->phy)) {
1030			ci->phy = NULL;
1031		}
1032
1033		/* Look for a legacy USB PHY from device-tree next */
1034		if (!ci->phy) {
1035			ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent,
1036								  "phys", 0);
1037
1038			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
1039				ret = -EPROBE_DEFER;
1040				goto ulpi_exit;
1041			} else if (IS_ERR(ci->usb_phy)) {
1042				ci->usb_phy = NULL;
1043			}
1044		}
1045
1046		/* Look for any registered legacy USB PHY as last resort */
1047		if (!ci->phy && !ci->usb_phy) {
1048			ci->usb_phy = devm_usb_get_phy(dev->parent,
1049						       USB_PHY_TYPE_USB2);
1050
1051			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
1052				ret = -EPROBE_DEFER;
1053				goto ulpi_exit;
1054			} else if (IS_ERR(ci->usb_phy)) {
1055				ci->usb_phy = NULL;
1056			}
1057		}
1058
1059		/* No USB PHY was found in the end */
1060		if (!ci->phy && !ci->usb_phy) {
1061			ret = -ENXIO;
1062			goto ulpi_exit;
1063		}
1064	}
1065
1066	ret = ci_usb_phy_init(ci);
1067	if (ret) {
1068		dev_err(dev, "unable to init phy: %d\n", ret);
1069		return ret;
1070	}
1071
1072	ci->hw_bank.phys = res->start;
1073
1074	ci->irq = platform_get_irq(pdev, 0);
1075	if (ci->irq < 0) {
1076		ret = ci->irq;
1077		goto deinit_phy;
1078	}
1079
1080	ci_get_otg_capable(ci);
1081
1082	dr_mode = ci->platdata->dr_mode;
1083	/* initialize role(s) before the interrupt is requested */
1084	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
1085		ret = ci_hdrc_host_init(ci);
1086		if (ret) {
1087			if (ret == -ENXIO)
1088				dev_info(dev, "doesn't support host\n");
1089			else
1090				goto deinit_phy;
1091		}
1092	}
1093
1094	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
1095		ret = ci_hdrc_gadget_init(ci);
1096		if (ret) {
1097			if (ret == -ENXIO)
1098				dev_info(dev, "doesn't support gadget\n");
1099			else
1100				goto deinit_host;
1101		}
1102	}
1103
1104	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
1105		dev_err(dev, "no supported roles\n");
1106		ret = -ENODEV;
1107		goto deinit_gadget;
1108	}
1109
1110	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
1111		ret = ci_hdrc_otg_init(ci);
1112		if (ret) {
1113			dev_err(dev, "init otg fails, ret = %d\n", ret);
1114			goto deinit_gadget;
1115		}
1116	}
1117
1118	if (ci_role_switch.fwnode) {
1119		ci->role_switch = usb_role_switch_register(dev,
1120					&ci_role_switch);
1121		if (IS_ERR(ci->role_switch)) {
1122			ret = PTR_ERR(ci->role_switch);
1123			goto deinit_otg;
1124		}
1125	}
1126
1127	if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
1128		if (ci->is_otg) {
1129			ci->role = ci_otg_role(ci);
1130			/* Enable ID change irq */
1131			hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
1132		} else {
1133			/*
1134			 * If the controller is not OTG capable, but support
1135			 * role switch, the defalt role is gadget, and the
1136			 * user can switch it through debugfs.
1137			 */
1138			ci->role = CI_ROLE_GADGET;
1139		}
1140	} else {
1141		ci->role = ci->roles[CI_ROLE_HOST]
1142			? CI_ROLE_HOST
1143			: CI_ROLE_GADGET;
1144	}
1145
1146	if (!ci_otg_is_fsm_mode(ci)) {
1147		/* only update vbus status for peripheral */
1148		if (ci->role == CI_ROLE_GADGET)
1149			ci_handle_vbus_change(ci);
1150
1151		ret = ci_role_start(ci, ci->role);
1152		if (ret) {
1153			dev_err(dev, "can't start %s role\n",
1154						ci_role(ci)->name);
1155			goto stop;
1156		}
1157	}
1158
1159	ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
1160			ci->platdata->name, ci);
1161	if (ret)
1162		goto stop;
1163
1164	ret = ci_extcon_register(ci);
1165	if (ret)
1166		goto stop;
1167
1168	if (ci->supports_runtime_pm) {
1169		pm_runtime_set_active(&pdev->dev);
1170		pm_runtime_enable(&pdev->dev);
1171		pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
1172		pm_runtime_mark_last_busy(ci->dev);
1173		pm_runtime_use_autosuspend(&pdev->dev);
1174	}
1175
1176	if (ci_otg_is_fsm_mode(ci))
1177		ci_hdrc_otg_fsm_start(ci);
1178
1179	device_set_wakeup_capable(&pdev->dev, true);
1180	dbg_create_files(ci);
1181
1182	return 0;
1183
1184stop:
1185	if (ci->role_switch)
1186		usb_role_switch_unregister(ci->role_switch);
1187deinit_otg:
1188	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
1189		ci_hdrc_otg_destroy(ci);
1190deinit_gadget:
1191	ci_hdrc_gadget_destroy(ci);
1192deinit_host:
1193	ci_hdrc_host_destroy(ci);
1194deinit_phy:
1195	ci_usb_phy_exit(ci);
1196ulpi_exit:
1197	ci_ulpi_exit(ci);
1198
1199	return ret;
1200}
1201
1202static int ci_hdrc_remove(struct platform_device *pdev)
1203{
1204	struct ci_hdrc *ci = platform_get_drvdata(pdev);
1205
1206	if (ci->role_switch)
1207		usb_role_switch_unregister(ci->role_switch);
1208
1209	if (ci->supports_runtime_pm) {
1210		pm_runtime_get_sync(&pdev->dev);
1211		pm_runtime_disable(&pdev->dev);
1212		pm_runtime_put_noidle(&pdev->dev);
1213	}
1214
1215	dbg_remove_files(ci);
1216	ci_role_destroy(ci);
1217	ci_hdrc_enter_lpm(ci, true);
1218	ci_usb_phy_exit(ci);
1219	ci_ulpi_exit(ci);
1220
1221	return 0;
1222}
1223
1224#ifdef CONFIG_PM
1225/* Prepare wakeup by SRP before suspend */
1226static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
1227{
1228	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1229				!hw_read_otgsc(ci, OTGSC_ID)) {
1230		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
1231								PORTSC_PP);
1232		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
1233								PORTSC_WKCN);
1234	}
1235}
1236
1237/* Handle SRP when wakeup by data pulse */
1238static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
1239{
1240	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1241		(ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
1242		if (!hw_read_otgsc(ci, OTGSC_ID)) {
1243			ci->fsm.a_srp_det = 1;
1244			ci->fsm.a_bus_drop = 0;
1245		} else {
1246			ci->fsm.id = 1;
1247		}
1248		ci_otg_queue_work(ci);
1249	}
1250}
1251
1252static void ci_controller_suspend(struct ci_hdrc *ci)
1253{
1254	disable_irq(ci->irq);
1255	ci_hdrc_enter_lpm(ci, true);
1256	if (ci->platdata->phy_clkgate_delay_us)
1257		usleep_range(ci->platdata->phy_clkgate_delay_us,
1258			     ci->platdata->phy_clkgate_delay_us + 50);
1259	usb_phy_set_suspend(ci->usb_phy, 1);
1260	ci->in_lpm = true;
1261	enable_irq(ci->irq);
1262}
1263
1264static int ci_controller_resume(struct device *dev)
1265{
1266	struct ci_hdrc *ci = dev_get_drvdata(dev);
1267	int ret;
1268
1269	dev_dbg(dev, "at %s\n", __func__);
1270
1271	if (!ci->in_lpm) {
1272		WARN_ON(1);
1273		return 0;
1274	}
1275
1276	ci_hdrc_enter_lpm(ci, false);
1277
1278	ret = ci_ulpi_resume(ci);
1279	if (ret)
1280		return ret;
1281
1282	if (ci->usb_phy) {
1283		usb_phy_set_suspend(ci->usb_phy, 0);
1284		usb_phy_set_wakeup(ci->usb_phy, false);
1285		hw_wait_phy_stable();
1286	}
1287
1288	ci->in_lpm = false;
1289	if (ci->wakeup_int) {
1290		ci->wakeup_int = false;
1291		pm_runtime_mark_last_busy(ci->dev);
1292		pm_runtime_put_autosuspend(ci->dev);
1293		enable_irq(ci->irq);
1294		if (ci_otg_is_fsm_mode(ci))
1295			ci_otg_fsm_wakeup_by_srp(ci);
1296	}
1297
1298	return 0;
1299}
1300
1301#ifdef CONFIG_PM_SLEEP
1302static int ci_suspend(struct device *dev)
1303{
1304	struct ci_hdrc *ci = dev_get_drvdata(dev);
1305
1306	if (ci->wq)
1307		flush_workqueue(ci->wq);
1308	/*
1309	 * Controller needs to be active during suspend, otherwise the core
1310	 * may run resume when the parent is at suspend if other driver's
1311	 * suspend fails, it occurs before parent's suspend has not started,
1312	 * but the core suspend has finished.
1313	 */
1314	if (ci->in_lpm)
1315		pm_runtime_resume(dev);
1316
1317	if (ci->in_lpm) {
1318		WARN_ON(1);
1319		return 0;
1320	}
1321
1322	if (device_may_wakeup(dev)) {
1323		if (ci_otg_is_fsm_mode(ci))
1324			ci_otg_fsm_suspend_for_srp(ci);
1325
1326		usb_phy_set_wakeup(ci->usb_phy, true);
1327		enable_irq_wake(ci->irq);
1328	}
1329
1330	ci_controller_suspend(ci);
1331
1332	return 0;
1333}
1334
1335static int ci_resume(struct device *dev)
1336{
1337	struct ci_hdrc *ci = dev_get_drvdata(dev);
1338	int ret;
1339
1340	if (device_may_wakeup(dev))
1341		disable_irq_wake(ci->irq);
1342
1343	ret = ci_controller_resume(dev);
1344	if (ret)
1345		return ret;
1346
1347	if (ci->supports_runtime_pm) {
1348		pm_runtime_disable(dev);
1349		pm_runtime_set_active(dev);
1350		pm_runtime_enable(dev);
1351	}
1352
1353	return ret;
1354}
1355#endif /* CONFIG_PM_SLEEP */
1356
1357static int ci_runtime_suspend(struct device *dev)
1358{
1359	struct ci_hdrc *ci = dev_get_drvdata(dev);
1360
1361	dev_dbg(dev, "at %s\n", __func__);
1362
1363	if (ci->in_lpm) {
1364		WARN_ON(1);
1365		return 0;
1366	}
1367
1368	if (ci_otg_is_fsm_mode(ci))
1369		ci_otg_fsm_suspend_for_srp(ci);
1370
1371	usb_phy_set_wakeup(ci->usb_phy, true);
1372	ci_controller_suspend(ci);
1373
1374	return 0;
1375}
1376
1377static int ci_runtime_resume(struct device *dev)
1378{
1379	return ci_controller_resume(dev);
1380}
1381
1382#endif /* CONFIG_PM */
1383static const struct dev_pm_ops ci_pm_ops = {
1384	SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
1385	SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
1386};
1387
1388static struct platform_driver ci_hdrc_driver = {
1389	.probe	= ci_hdrc_probe,
1390	.remove	= ci_hdrc_remove,
1391	.driver	= {
1392		.name	= "ci_hdrc",
1393		.pm	= &ci_pm_ops,
1394		.dev_groups = ci_groups,
1395	},
1396};
1397
1398static int __init ci_hdrc_platform_register(void)
1399{
1400	ci_hdrc_host_driver_init();
1401	return platform_driver_register(&ci_hdrc_driver);
1402}
1403module_init(ci_hdrc_platform_register);
1404
1405static void __exit ci_hdrc_platform_unregister(void)
1406{
1407	platform_driver_unregister(&ci_hdrc_driver);
1408}
1409module_exit(ci_hdrc_platform_unregister);
1410
1411MODULE_ALIAS("platform:ci_hdrc");
1412MODULE_LICENSE("GPL v2");
1413MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
1414MODULE_DESCRIPTION("ChipIdea HDRC Driver");