Loading...
1/*
2 * NinjaSCSI-32Bi Cardbus, NinjaSCSI-32UDE PCI/CardBus SCSI driver
3 * Copyright (C) 2001, 2002, 2003
4 * YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
5 * GOTO Masanori <gotom@debian.or.jp>, <gotom@debian.org>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2, or (at your option)
10 * any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 *
18 * Revision History:
19 * 1.0: Initial Release.
20 * 1.1: Add /proc SDTR status.
21 * Remove obsolete error handler nsp32_reset.
22 * Some clean up.
23 * 1.2: PowerPC (big endian) support.
24 */
25
26#include <linux/module.h>
27#include <linux/init.h>
28#include <linux/kernel.h>
29#include <linux/string.h>
30#include <linux/timer.h>
31#include <linux/ioport.h>
32#include <linux/major.h>
33#include <linux/blkdev.h>
34#include <linux/interrupt.h>
35#include <linux/pci.h>
36#include <linux/delay.h>
37#include <linux/ctype.h>
38#include <linux/dma-mapping.h>
39
40#include <asm/dma.h>
41#include <asm/system.h>
42#include <asm/io.h>
43
44#include <scsi/scsi.h>
45#include <scsi/scsi_cmnd.h>
46#include <scsi/scsi_device.h>
47#include <scsi/scsi_host.h>
48#include <scsi/scsi_ioctl.h>
49
50#include "nsp32.h"
51
52
53/***********************************************************************
54 * Module parameters
55 */
56static int trans_mode = 0; /* default: BIOS */
57module_param (trans_mode, int, 0);
58MODULE_PARM_DESC(trans_mode, "transfer mode (0: BIOS(default) 1: Async 2: Ultra20M");
59#define ASYNC_MODE 1
60#define ULTRA20M_MODE 2
61
62static int auto_param = 0; /* default: ON */
63module_param (auto_param, bool, 0);
64MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)");
65
66static int disc_priv = 1; /* default: OFF */
67module_param (disc_priv, bool, 0);
68MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))");
69
70MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>, GOTO Masanori <gotom@debian.or.jp>");
71MODULE_DESCRIPTION("Workbit NinjaSCSI-32Bi/UDE CardBus/PCI SCSI host bus adapter module");
72MODULE_LICENSE("GPL");
73
74static const char *nsp32_release_version = "1.2";
75
76
77/****************************************************************************
78 * Supported hardware
79 */
80static struct pci_device_id nsp32_pci_table[] __devinitdata = {
81 {
82 .vendor = PCI_VENDOR_ID_IODATA,
83 .device = PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II,
84 .subvendor = PCI_ANY_ID,
85 .subdevice = PCI_ANY_ID,
86 .driver_data = MODEL_IODATA,
87 },
88 {
89 .vendor = PCI_VENDOR_ID_WORKBIT,
90 .device = PCI_DEVICE_ID_NINJASCSI_32BI_KME,
91 .subvendor = PCI_ANY_ID,
92 .subdevice = PCI_ANY_ID,
93 .driver_data = MODEL_KME,
94 },
95 {
96 .vendor = PCI_VENDOR_ID_WORKBIT,
97 .device = PCI_DEVICE_ID_NINJASCSI_32BI_WBT,
98 .subvendor = PCI_ANY_ID,
99 .subdevice = PCI_ANY_ID,
100 .driver_data = MODEL_WORKBIT,
101 },
102 {
103 .vendor = PCI_VENDOR_ID_WORKBIT,
104 .device = PCI_DEVICE_ID_WORKBIT_STANDARD,
105 .subvendor = PCI_ANY_ID,
106 .subdevice = PCI_ANY_ID,
107 .driver_data = MODEL_PCI_WORKBIT,
108 },
109 {
110 .vendor = PCI_VENDOR_ID_WORKBIT,
111 .device = PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC,
112 .subvendor = PCI_ANY_ID,
113 .subdevice = PCI_ANY_ID,
114 .driver_data = MODEL_LOGITEC,
115 },
116 {
117 .vendor = PCI_VENDOR_ID_WORKBIT,
118 .device = PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC,
119 .subvendor = PCI_ANY_ID,
120 .subdevice = PCI_ANY_ID,
121 .driver_data = MODEL_PCI_LOGITEC,
122 },
123 {
124 .vendor = PCI_VENDOR_ID_WORKBIT,
125 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO,
126 .subvendor = PCI_ANY_ID,
127 .subdevice = PCI_ANY_ID,
128 .driver_data = MODEL_PCI_MELCO,
129 },
130 {
131 .vendor = PCI_VENDOR_ID_WORKBIT,
132 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II,
133 .subvendor = PCI_ANY_ID,
134 .subdevice = PCI_ANY_ID,
135 .driver_data = MODEL_PCI_MELCO,
136 },
137 {0,0,},
138};
139MODULE_DEVICE_TABLE(pci, nsp32_pci_table);
140
141static nsp32_hw_data nsp32_data_base; /* probe <-> detect glue */
142
143
144/*
145 * Period/AckWidth speed conversion table
146 *
147 * Note: This period/ackwidth speed table must be in descending order.
148 */
149static nsp32_sync_table nsp32_sync_table_40M[] = {
150 /* {PNo, AW, SP, EP, SREQ smpl} Speed(MB/s) Period AckWidth */
151 {0x1, 0, 0x0c, 0x0c, SMPL_40M}, /* 20.0 : 50ns, 25ns */
152 {0x2, 0, 0x0d, 0x18, SMPL_40M}, /* 13.3 : 75ns, 25ns */
153 {0x3, 1, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */
154 {0x4, 1, 0x1a, 0x1f, SMPL_20M}, /* 8.0 : 125ns, 50ns */
155 {0x5, 2, 0x20, 0x25, SMPL_20M}, /* 6.7 : 150ns, 75ns */
156 {0x6, 2, 0x26, 0x31, SMPL_20M}, /* 5.7 : 175ns, 75ns */
157 {0x7, 3, 0x32, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */
158 {0x8, 3, 0x33, 0x38, SMPL_10M}, /* 4.4 : 225ns, 100ns */
159 {0x9, 3, 0x39, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */
160};
161
162static nsp32_sync_table nsp32_sync_table_20M[] = {
163 {0x1, 0, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */
164 {0x2, 0, 0x1a, 0x25, SMPL_20M}, /* 6.7 : 150ns, 50ns */
165 {0x3, 1, 0x26, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */
166 {0x4, 1, 0x33, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */
167 {0x5, 2, 0x3f, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 150ns */
168 {0x6, 2, 0x4c, 0x57, SMPL_10M}, /* 2.8 : 350ns, 150ns */
169 {0x7, 3, 0x58, 0x64, SMPL_10M}, /* 2.5 : 400ns, 200ns */
170 {0x8, 3, 0x65, 0x70, SMPL_10M}, /* 2.2 : 450ns, 200ns */
171 {0x9, 3, 0x71, 0x7d, SMPL_10M}, /* 2.0 : 500ns, 200ns */
172};
173
174static nsp32_sync_table nsp32_sync_table_pci[] = {
175 {0x1, 0, 0x0c, 0x0f, SMPL_40M}, /* 16.6 : 60ns, 30ns */
176 {0x2, 0, 0x10, 0x16, SMPL_40M}, /* 11.1 : 90ns, 30ns */
177 {0x3, 1, 0x17, 0x1e, SMPL_20M}, /* 8.3 : 120ns, 60ns */
178 {0x4, 1, 0x1f, 0x25, SMPL_20M}, /* 6.7 : 150ns, 60ns */
179 {0x5, 2, 0x26, 0x2d, SMPL_20M}, /* 5.6 : 180ns, 90ns */
180 {0x6, 2, 0x2e, 0x34, SMPL_10M}, /* 4.8 : 210ns, 90ns */
181 {0x7, 3, 0x35, 0x3c, SMPL_10M}, /* 4.2 : 240ns, 120ns */
182 {0x8, 3, 0x3d, 0x43, SMPL_10M}, /* 3.7 : 270ns, 120ns */
183 {0x9, 3, 0x44, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 120ns */
184};
185
186/*
187 * function declaration
188 */
189/* module entry point */
190static int __devinit nsp32_probe (struct pci_dev *, const struct pci_device_id *);
191static void __devexit nsp32_remove(struct pci_dev *);
192static int __init init_nsp32 (void);
193static void __exit exit_nsp32 (void);
194
195/* struct struct scsi_host_template */
196static int nsp32_proc_info (struct Scsi_Host *, char *, char **, off_t, int, int);
197
198static int nsp32_detect (struct pci_dev *pdev);
199static int nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
200static const char *nsp32_info (struct Scsi_Host *);
201static int nsp32_release (struct Scsi_Host *);
202
203/* SCSI error handler */
204static int nsp32_eh_abort (struct scsi_cmnd *);
205static int nsp32_eh_bus_reset (struct scsi_cmnd *);
206static int nsp32_eh_host_reset(struct scsi_cmnd *);
207
208/* generate SCSI message */
209static void nsp32_build_identify(struct scsi_cmnd *);
210static void nsp32_build_nop (struct scsi_cmnd *);
211static void nsp32_build_reject (struct scsi_cmnd *);
212static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char, unsigned char);
213
214/* SCSI message handler */
215static int nsp32_busfree_occur(struct scsi_cmnd *, unsigned short);
216static void nsp32_msgout_occur (struct scsi_cmnd *);
217static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long, unsigned short);
218
219static int nsp32_setup_sg_table (struct scsi_cmnd *);
220static int nsp32_selection_autopara(struct scsi_cmnd *);
221static int nsp32_selection_autoscsi(struct scsi_cmnd *);
222static void nsp32_scsi_done (struct scsi_cmnd *);
223static int nsp32_arbitration (struct scsi_cmnd *, unsigned int);
224static int nsp32_reselection (struct scsi_cmnd *, unsigned char);
225static void nsp32_adjust_busfree (struct scsi_cmnd *, unsigned int);
226static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short);
227
228/* SCSI SDTR */
229static void nsp32_analyze_sdtr (struct scsi_cmnd *);
230static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *, unsigned char);
231static void nsp32_set_async (nsp32_hw_data *, nsp32_target *);
232static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *, unsigned char *, unsigned char *);
233static void nsp32_set_sync_entry (nsp32_hw_data *, nsp32_target *, int, unsigned char);
234
235/* SCSI bus status handler */
236static void nsp32_wait_req (nsp32_hw_data *, int);
237static void nsp32_wait_sack (nsp32_hw_data *, int);
238static void nsp32_sack_assert (nsp32_hw_data *);
239static void nsp32_sack_negate (nsp32_hw_data *);
240static void nsp32_do_bus_reset(nsp32_hw_data *);
241
242/* hardware interrupt handler */
243static irqreturn_t do_nsp32_isr(int, void *);
244
245/* initialize hardware */
246static int nsp32hw_init(nsp32_hw_data *);
247
248/* EEPROM handler */
249static int nsp32_getprom_param (nsp32_hw_data *);
250static int nsp32_getprom_at24 (nsp32_hw_data *);
251static int nsp32_getprom_c16 (nsp32_hw_data *);
252static void nsp32_prom_start (nsp32_hw_data *);
253static void nsp32_prom_stop (nsp32_hw_data *);
254static int nsp32_prom_read (nsp32_hw_data *, int);
255static int nsp32_prom_read_bit (nsp32_hw_data *);
256static void nsp32_prom_write_bit(nsp32_hw_data *, int);
257static void nsp32_prom_set (nsp32_hw_data *, int, int);
258static int nsp32_prom_get (nsp32_hw_data *, int);
259
260/* debug/warning/info message */
261static void nsp32_message (const char *, int, char *, char *, ...);
262#ifdef NSP32_DEBUG
263static void nsp32_dmessage(const char *, int, int, char *, ...);
264#endif
265
266/*
267 * max_sectors is currently limited up to 128.
268 */
269static struct scsi_host_template nsp32_template = {
270 .proc_name = "nsp32",
271 .name = "Workbit NinjaSCSI-32Bi/UDE",
272 .proc_info = nsp32_proc_info,
273 .info = nsp32_info,
274 .queuecommand = nsp32_queuecommand,
275 .can_queue = 1,
276 .sg_tablesize = NSP32_SG_SIZE,
277 .max_sectors = 128,
278 .cmd_per_lun = 1,
279 .this_id = NSP32_HOST_SCSIID,
280 .use_clustering = DISABLE_CLUSTERING,
281 .eh_abort_handler = nsp32_eh_abort,
282 .eh_bus_reset_handler = nsp32_eh_bus_reset,
283 .eh_host_reset_handler = nsp32_eh_host_reset,
284/* .highmem_io = 1, */
285};
286
287#include "nsp32_io.h"
288
289/***********************************************************************
290 * debug, error print
291 */
292#ifndef NSP32_DEBUG
293# define NSP32_DEBUG_MASK 0x000000
294# define nsp32_msg(type, args...) nsp32_message ("", 0, (type), args)
295# define nsp32_dbg(mask, args...) /* */
296#else
297# define NSP32_DEBUG_MASK 0xffffff
298# define nsp32_msg(type, args...) \
299 nsp32_message (__func__, __LINE__, (type), args)
300# define nsp32_dbg(mask, args...) \
301 nsp32_dmessage(__func__, __LINE__, (mask), args)
302#endif
303
304#define NSP32_DEBUG_QUEUECOMMAND BIT(0)
305#define NSP32_DEBUG_REGISTER BIT(1)
306#define NSP32_DEBUG_AUTOSCSI BIT(2)
307#define NSP32_DEBUG_INTR BIT(3)
308#define NSP32_DEBUG_SGLIST BIT(4)
309#define NSP32_DEBUG_BUSFREE BIT(5)
310#define NSP32_DEBUG_CDB_CONTENTS BIT(6)
311#define NSP32_DEBUG_RESELECTION BIT(7)
312#define NSP32_DEBUG_MSGINOCCUR BIT(8)
313#define NSP32_DEBUG_EEPROM BIT(9)
314#define NSP32_DEBUG_MSGOUTOCCUR BIT(10)
315#define NSP32_DEBUG_BUSRESET BIT(11)
316#define NSP32_DEBUG_RESTART BIT(12)
317#define NSP32_DEBUG_SYNC BIT(13)
318#define NSP32_DEBUG_WAIT BIT(14)
319#define NSP32_DEBUG_TARGETFLAG BIT(15)
320#define NSP32_DEBUG_PROC BIT(16)
321#define NSP32_DEBUG_INIT BIT(17)
322#define NSP32_SPECIAL_PRINT_REGISTER BIT(20)
323
324#define NSP32_DEBUG_BUF_LEN 100
325
326static void nsp32_message(const char *func, int line, char *type, char *fmt, ...)
327{
328 va_list args;
329 char buf[NSP32_DEBUG_BUF_LEN];
330
331 va_start(args, fmt);
332 vsnprintf(buf, sizeof(buf), fmt, args);
333 va_end(args);
334
335#ifndef NSP32_DEBUG
336 printk("%snsp32: %s\n", type, buf);
337#else
338 printk("%snsp32: %s (%d): %s\n", type, func, line, buf);
339#endif
340}
341
342#ifdef NSP32_DEBUG
343static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...)
344{
345 va_list args;
346 char buf[NSP32_DEBUG_BUF_LEN];
347
348 va_start(args, fmt);
349 vsnprintf(buf, sizeof(buf), fmt, args);
350 va_end(args);
351
352 if (mask & NSP32_DEBUG_MASK) {
353 printk("nsp32-debug: 0x%x %s (%d): %s\n", mask, func, line, buf);
354 }
355}
356#endif
357
358#ifdef NSP32_DEBUG
359# include "nsp32_debug.c"
360#else
361# define show_command(arg) /* */
362# define show_busphase(arg) /* */
363# define show_autophase(arg) /* */
364#endif
365
366/*
367 * IDENTIFY Message
368 */
369static void nsp32_build_identify(struct scsi_cmnd *SCpnt)
370{
371 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
372 int pos = data->msgout_len;
373 int mode = FALSE;
374
375 /* XXX: Auto DiscPriv detection is progressing... */
376 if (disc_priv == 0) {
377 /* mode = TRUE; */
378 }
379
380 data->msgoutbuf[pos] = IDENTIFY(mode, SCpnt->device->lun); pos++;
381
382 data->msgout_len = pos;
383}
384
385/*
386 * SDTR Message Routine
387 */
388static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt,
389 unsigned char period,
390 unsigned char offset)
391{
392 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
393 int pos = data->msgout_len;
394
395 data->msgoutbuf[pos] = EXTENDED_MESSAGE; pos++;
396 data->msgoutbuf[pos] = EXTENDED_SDTR_LEN; pos++;
397 data->msgoutbuf[pos] = EXTENDED_SDTR; pos++;
398 data->msgoutbuf[pos] = period; pos++;
399 data->msgoutbuf[pos] = offset; pos++;
400
401 data->msgout_len = pos;
402}
403
404/*
405 * No Operation Message
406 */
407static void nsp32_build_nop(struct scsi_cmnd *SCpnt)
408{
409 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
410 int pos = data->msgout_len;
411
412 if (pos != 0) {
413 nsp32_msg(KERN_WARNING,
414 "Some messages are already contained!");
415 return;
416 }
417
418 data->msgoutbuf[pos] = NOP; pos++;
419 data->msgout_len = pos;
420}
421
422/*
423 * Reject Message
424 */
425static void nsp32_build_reject(struct scsi_cmnd *SCpnt)
426{
427 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
428 int pos = data->msgout_len;
429
430 data->msgoutbuf[pos] = MESSAGE_REJECT; pos++;
431 data->msgout_len = pos;
432}
433
434/*
435 * timer
436 */
437#if 0
438static void nsp32_start_timer(struct scsi_cmnd *SCpnt, int time)
439{
440 unsigned int base = SCpnt->host->io_port;
441
442 nsp32_dbg(NSP32_DEBUG_INTR, "timer=%d", time);
443
444 if (time & (~TIMER_CNT_MASK)) {
445 nsp32_dbg(NSP32_DEBUG_INTR, "timer set overflow");
446 }
447
448 nsp32_write2(base, TIMER_SET, time & TIMER_CNT_MASK);
449}
450#endif
451
452
453/*
454 * set SCSI command and other parameter to asic, and start selection phase
455 */
456static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
457{
458 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
459 unsigned int base = SCpnt->device->host->io_port;
460 unsigned int host_id = SCpnt->device->host->this_id;
461 unsigned char target = scmd_id(SCpnt);
462 nsp32_autoparam *param = data->autoparam;
463 unsigned char phase;
464 int i, ret;
465 unsigned int msgout;
466 u16_le s;
467
468 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
469
470 /*
471 * check bus free
472 */
473 phase = nsp32_read1(base, SCSI_BUS_MONITOR);
474 if (phase != BUSMON_BUS_FREE) {
475 nsp32_msg(KERN_WARNING, "bus busy");
476 show_busphase(phase & BUSMON_PHASE_MASK);
477 SCpnt->result = DID_BUS_BUSY << 16;
478 return FALSE;
479 }
480
481 /*
482 * message out
483 *
484 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout.
485 * over 3 messages needs another routine.
486 */
487 if (data->msgout_len == 0) {
488 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!");
489 SCpnt->result = DID_ERROR << 16;
490 return FALSE;
491 } else if (data->msgout_len > 0 && data->msgout_len <= 3) {
492 msgout = 0;
493 for (i = 0; i < data->msgout_len; i++) {
494 /*
495 * the sending order of the message is:
496 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2
497 * MCNT 2: MSG#1 -> MSG#2
498 * MCNT 1: MSG#2
499 */
500 msgout >>= 8;
501 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
502 }
503 msgout |= MV_VALID; /* MV valid */
504 msgout |= (unsigned int)data->msgout_len; /* len */
505 } else {
506 /* data->msgout_len > 3 */
507 msgout = 0;
508 }
509
510 // nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", nsp32_read2(base, SEL_TIME_OUT));
511 // nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
512
513 /*
514 * setup asic parameter
515 */
516 memset(param, 0, sizeof(nsp32_autoparam));
517
518 /* cdb */
519 for (i = 0; i < SCpnt->cmd_len; i++) {
520 param->cdb[4 * i] = SCpnt->cmnd[i];
521 }
522
523 /* outgoing messages */
524 param->msgout = cpu_to_le32(msgout);
525
526 /* syncreg, ackwidth, target id, SREQ sampling rate */
527 param->syncreg = data->cur_target->syncreg;
528 param->ackwidth = data->cur_target->ackwidth;
529 param->target_id = BIT(host_id) | BIT(target);
530 param->sample_reg = data->cur_target->sample_reg;
531
532 // nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "sample rate=0x%x\n", data->cur_target->sample_reg);
533
534 /* command control */
535 param->command_control = cpu_to_le16(CLEAR_CDB_FIFO_POINTER |
536 AUTOSCSI_START |
537 AUTO_MSGIN_00_OR_04 |
538 AUTO_MSGIN_02 |
539 AUTO_ATN );
540
541
542 /* transfer control */
543 s = 0;
544 switch (data->trans_method) {
545 case NSP32_TRANSFER_BUSMASTER:
546 s |= BM_START;
547 break;
548 case NSP32_TRANSFER_MMIO:
549 s |= CB_MMIO_MODE;
550 break;
551 case NSP32_TRANSFER_PIO:
552 s |= CB_IO_MODE;
553 break;
554 default:
555 nsp32_msg(KERN_ERR, "unknown trans_method");
556 break;
557 }
558 /*
559 * OR-ed BLIEND_MODE, FIFO intr is decreased, instead of PCI bus waits.
560 * For bus master transfer, it's taken off.
561 */
562 s |= (TRANSFER_GO | ALL_COUNTER_CLR);
563 param->transfer_control = cpu_to_le16(s);
564
565 /* sg table addr */
566 param->sgt_pointer = cpu_to_le32(data->cur_lunt->sglun_paddr);
567
568 /*
569 * transfer parameter to ASIC
570 */
571 nsp32_write4(base, SGT_ADR, data->auto_paddr);
572 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER |
573 AUTO_PARAMETER );
574
575 /*
576 * Check arbitration
577 */
578 ret = nsp32_arbitration(SCpnt, base);
579
580 return ret;
581}
582
583
584/*
585 * Selection with AUTO SCSI (without AUTO PARAMETER)
586 */
587static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
588{
589 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
590 unsigned int base = SCpnt->device->host->io_port;
591 unsigned int host_id = SCpnt->device->host->this_id;
592 unsigned char target = scmd_id(SCpnt);
593 unsigned char phase;
594 int status;
595 unsigned short command = 0;
596 unsigned int msgout = 0;
597 unsigned short execph;
598 int i;
599
600 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
601
602 /*
603 * IRQ disable
604 */
605 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
606
607 /*
608 * check bus line
609 */
610 phase = nsp32_read1(base, SCSI_BUS_MONITOR);
611 if(((phase & BUSMON_BSY) == 1) || (phase & BUSMON_SEL) == 1) {
612 nsp32_msg(KERN_WARNING, "bus busy");
613 SCpnt->result = DID_BUS_BUSY << 16;
614 status = 1;
615 goto out;
616 }
617
618 /*
619 * clear execph
620 */
621 execph = nsp32_read2(base, SCSI_EXECUTE_PHASE);
622
623 /*
624 * clear FIFO counter to set CDBs
625 */
626 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER);
627
628 /*
629 * set CDB0 - CDB15
630 */
631 for (i = 0; i < SCpnt->cmd_len; i++) {
632 nsp32_write1(base, COMMAND_DATA, SCpnt->cmnd[i]);
633 }
634 nsp32_dbg(NSP32_DEBUG_CDB_CONTENTS, "CDB[0]=[0x%x]", SCpnt->cmnd[0]);
635
636 /*
637 * set SCSIOUT LATCH(initiator)/TARGET(target) (OR-ed) ID
638 */
639 nsp32_write1(base, SCSI_OUT_LATCH_TARGET_ID, BIT(host_id) | BIT(target));
640
641 /*
642 * set SCSI MSGOUT REG
643 *
644 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout.
645 * over 3 messages needs another routine.
646 */
647 if (data->msgout_len == 0) {
648 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!");
649 SCpnt->result = DID_ERROR << 16;
650 status = 1;
651 goto out;
652 } else if (data->msgout_len > 0 && data->msgout_len <= 3) {
653 msgout = 0;
654 for (i = 0; i < data->msgout_len; i++) {
655 /*
656 * the sending order of the message is:
657 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2
658 * MCNT 2: MSG#1 -> MSG#2
659 * MCNT 1: MSG#2
660 */
661 msgout >>= 8;
662 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
663 }
664 msgout |= MV_VALID; /* MV valid */
665 msgout |= (unsigned int)data->msgout_len; /* len */
666 nsp32_write4(base, SCSI_MSG_OUT, msgout);
667 } else {
668 /* data->msgout_len > 3 */
669 nsp32_write4(base, SCSI_MSG_OUT, 0);
670 }
671
672 /*
673 * set selection timeout(= 250ms)
674 */
675 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
676
677 /*
678 * set SREQ hazard killer sampling rate
679 *
680 * TODO: sample_rate (BASE+0F) is 0 when internal clock = 40MHz.
681 * check other internal clock!
682 */
683 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg);
684
685 /*
686 * clear Arbit
687 */
688 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR);
689
690 /*
691 * set SYNCREG
692 * Don't set BM_START_ADR before setting this register.
693 */
694 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg);
695
696 /*
697 * set ACKWIDTH
698 */
699 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth);
700
701 nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
702 "syncreg=0x%x, ackwidth=0x%x, sgtpaddr=0x%x, id=0x%x",
703 nsp32_read1(base, SYNC_REG), nsp32_read1(base, ACK_WIDTH),
704 nsp32_read4(base, SGT_ADR), nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID));
705 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "msgout_len=%d, msgout=0x%x",
706 data->msgout_len, msgout);
707
708 /*
709 * set SGT ADDR (physical address)
710 */
711 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr);
712
713 /*
714 * set TRANSFER CONTROL REG
715 */
716 command = 0;
717 command |= (TRANSFER_GO | ALL_COUNTER_CLR);
718 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
719 if (scsi_bufflen(SCpnt) > 0) {
720 command |= BM_START;
721 }
722 } else if (data->trans_method & NSP32_TRANSFER_MMIO) {
723 command |= CB_MMIO_MODE;
724 } else if (data->trans_method & NSP32_TRANSFER_PIO) {
725 command |= CB_IO_MODE;
726 }
727 nsp32_write2(base, TRANSFER_CONTROL, command);
728
729 /*
730 * start AUTO SCSI, kick off arbitration
731 */
732 command = (CLEAR_CDB_FIFO_POINTER |
733 AUTOSCSI_START |
734 AUTO_MSGIN_00_OR_04 |
735 AUTO_MSGIN_02 |
736 AUTO_ATN );
737 nsp32_write2(base, COMMAND_CONTROL, command);
738
739 /*
740 * Check arbitration
741 */
742 status = nsp32_arbitration(SCpnt, base);
743
744 out:
745 /*
746 * IRQ enable
747 */
748 nsp32_write2(base, IRQ_CONTROL, 0);
749
750 return status;
751}
752
753
754/*
755 * Arbitration Status Check
756 *
757 * Note: Arbitration counter is waited during ARBIT_GO is not lifting.
758 * Using udelay(1) consumes CPU time and system time, but
759 * arbitration delay time is defined minimal 2.4us in SCSI
760 * specification, thus udelay works as coarse grained wait timer.
761 */
762static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base)
763{
764 unsigned char arbit;
765 int status = TRUE;
766 int time = 0;
767
768 do {
769 arbit = nsp32_read1(base, ARBIT_STATUS);
770 time++;
771 } while ((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 &&
772 (time <= ARBIT_TIMEOUT_TIME));
773
774 nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
775 "arbit: 0x%x, delay time: %d", arbit, time);
776
777 if (arbit & ARBIT_WIN) {
778 /* Arbitration succeeded */
779 SCpnt->result = DID_OK << 16;
780 nsp32_index_write1(base, EXT_PORT, LED_ON); /* PCI LED on */
781 } else if (arbit & ARBIT_FAIL) {
782 /* Arbitration failed */
783 SCpnt->result = DID_BUS_BUSY << 16;
784 status = FALSE;
785 } else {
786 /*
787 * unknown error or ARBIT_GO timeout,
788 * something lock up! guess no connection.
789 */
790 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "arbit timeout");
791 SCpnt->result = DID_NO_CONNECT << 16;
792 status = FALSE;
793 }
794
795 /*
796 * clear Arbit
797 */
798 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR);
799
800 return status;
801}
802
803
804/*
805 * reselection
806 *
807 * Note: This reselection routine is called from msgin_occur,
808 * reselection target id&lun must be already set.
809 * SCSI-2 says IDENTIFY implies RESTORE_POINTER operation.
810 */
811static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun)
812{
813 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
814 unsigned int host_id = SCpnt->device->host->this_id;
815 unsigned int base = SCpnt->device->host->io_port;
816 unsigned char tmpid, newid;
817
818 nsp32_dbg(NSP32_DEBUG_RESELECTION, "enter");
819
820 /*
821 * calculate reselected SCSI ID
822 */
823 tmpid = nsp32_read1(base, RESELECT_ID);
824 tmpid &= (~BIT(host_id));
825 newid = 0;
826 while (tmpid) {
827 if (tmpid & 1) {
828 break;
829 }
830 tmpid >>= 1;
831 newid++;
832 }
833
834 /*
835 * If reselected New ID:LUN is not existed
836 * or current nexus is not existed, unexpected
837 * reselection is occurred. Send reject message.
838 */
839 if (newid >= ARRAY_SIZE(data->lunt) || newlun >= ARRAY_SIZE(data->lunt[0])) {
840 nsp32_msg(KERN_WARNING, "unknown id/lun");
841 return FALSE;
842 } else if(data->lunt[newid][newlun].SCpnt == NULL) {
843 nsp32_msg(KERN_WARNING, "no SCSI command is processing");
844 return FALSE;
845 }
846
847 data->cur_id = newid;
848 data->cur_lun = newlun;
849 data->cur_target = &(data->target[newid]);
850 data->cur_lunt = &(data->lunt[newid][newlun]);
851
852 /* reset SACK/SavedACK counter (or ALL clear?) */
853 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
854
855 return TRUE;
856}
857
858
859/*
860 * nsp32_setup_sg_table - build scatter gather list for transfer data
861 * with bus master.
862 *
863 * Note: NinjaSCSI-32Bi/UDE bus master can not transfer over 64KB at a time.
864 */
865static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
866{
867 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
868 struct scatterlist *sg;
869 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
870 int num, i;
871 u32_le l;
872
873 if (sgt == NULL) {
874 nsp32_dbg(NSP32_DEBUG_SGLIST, "SGT == null");
875 return FALSE;
876 }
877
878 num = scsi_dma_map(SCpnt);
879 if (!num)
880 return TRUE;
881 else if (num < 0)
882 return FALSE;
883 else {
884 scsi_for_each_sg(SCpnt, sg, num, i) {
885 /*
886 * Build nsp32_sglist, substitute sg dma addresses.
887 */
888 sgt[i].addr = cpu_to_le32(sg_dma_address(sg));
889 sgt[i].len = cpu_to_le32(sg_dma_len(sg));
890
891 if (le32_to_cpu(sgt[i].len) > 0x10000) {
892 nsp32_msg(KERN_ERR,
893 "can't transfer over 64KB at a time, size=0x%lx", le32_to_cpu(sgt[i].len));
894 return FALSE;
895 }
896 nsp32_dbg(NSP32_DEBUG_SGLIST,
897 "num 0x%x : addr 0x%lx len 0x%lx",
898 i,
899 le32_to_cpu(sgt[i].addr),
900 le32_to_cpu(sgt[i].len ));
901 }
902
903 /* set end mark */
904 l = le32_to_cpu(sgt[num-1].len);
905 sgt[num-1].len = cpu_to_le32(l | SGTEND);
906 }
907
908 return TRUE;
909}
910
911static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
912{
913 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
914 nsp32_target *target;
915 nsp32_lunt *cur_lunt;
916 int ret;
917
918 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
919 "enter. target: 0x%x LUN: 0x%x cmnd: 0x%x cmndlen: 0x%x "
920 "use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x",
921 SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len,
922 scsi_sg_count(SCpnt), scsi_sglist(SCpnt), scsi_bufflen(SCpnt));
923
924 if (data->CurrentSC != NULL) {
925 nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request");
926 data->CurrentSC = NULL;
927 SCpnt->result = DID_NO_CONNECT << 16;
928 done(SCpnt);
929 return 0;
930 }
931
932 /* check target ID is not same as this initiator ID */
933 if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
934 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???");
935 SCpnt->result = DID_BAD_TARGET << 16;
936 done(SCpnt);
937 return 0;
938 }
939
940 /* check target LUN is allowable value */
941 if (SCpnt->device->lun >= MAX_LUN) {
942 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "no more lun");
943 SCpnt->result = DID_BAD_TARGET << 16;
944 done(SCpnt);
945 return 0;
946 }
947
948 show_command(SCpnt);
949
950 SCpnt->scsi_done = done;
951 data->CurrentSC = SCpnt;
952 SCpnt->SCp.Status = CHECK_CONDITION;
953 SCpnt->SCp.Message = 0;
954 scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
955
956 SCpnt->SCp.ptr = (char *)scsi_sglist(SCpnt);
957 SCpnt->SCp.this_residual = scsi_bufflen(SCpnt);
958 SCpnt->SCp.buffer = NULL;
959 SCpnt->SCp.buffers_residual = 0;
960
961 /* initialize data */
962 data->msgout_len = 0;
963 data->msgin_len = 0;
964 cur_lunt = &(data->lunt[SCpnt->device->id][SCpnt->device->lun]);
965 cur_lunt->SCpnt = SCpnt;
966 cur_lunt->save_datp = 0;
967 cur_lunt->msgin03 = FALSE;
968 data->cur_lunt = cur_lunt;
969 data->cur_id = SCpnt->device->id;
970 data->cur_lun = SCpnt->device->lun;
971
972 ret = nsp32_setup_sg_table(SCpnt);
973 if (ret == FALSE) {
974 nsp32_msg(KERN_ERR, "SGT fail");
975 SCpnt->result = DID_ERROR << 16;
976 nsp32_scsi_done(SCpnt);
977 return 0;
978 }
979
980 /* Build IDENTIFY */
981 nsp32_build_identify(SCpnt);
982
983 /*
984 * If target is the first time to transfer after the reset
985 * (target don't have SDTR_DONE and SDTR_INITIATOR), sync
986 * message SDTR is needed to do synchronous transfer.
987 */
988 target = &data->target[scmd_id(SCpnt)];
989 data->cur_target = target;
990
991 if (!(target->sync_flag & (SDTR_DONE | SDTR_INITIATOR | SDTR_TARGET))) {
992 unsigned char period, offset;
993
994 if (trans_mode != ASYNC_MODE) {
995 nsp32_set_max_sync(data, target, &period, &offset);
996 nsp32_build_sdtr(SCpnt, period, offset);
997 target->sync_flag |= SDTR_INITIATOR;
998 } else {
999 nsp32_set_async(data, target);
1000 target->sync_flag |= SDTR_DONE;
1001 }
1002
1003 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1004 "SDTR: entry: %d start_period: 0x%x offset: 0x%x\n",
1005 target->limit_entry, period, offset);
1006 } else if (target->sync_flag & SDTR_INITIATOR) {
1007 /*
1008 * It was negotiating SDTR with target, sending from the
1009 * initiator, but there are no chance to remove this flag.
1010 * Set async because we don't get proper negotiation.
1011 */
1012 nsp32_set_async(data, target);
1013 target->sync_flag &= ~SDTR_INITIATOR;
1014 target->sync_flag |= SDTR_DONE;
1015
1016 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1017 "SDTR_INITIATOR: fall back to async");
1018 } else if (target->sync_flag & SDTR_TARGET) {
1019 /*
1020 * It was negotiating SDTR with target, sending from target,
1021 * but there are no chance to remove this flag. Set async
1022 * because we don't get proper negotiation.
1023 */
1024 nsp32_set_async(data, target);
1025 target->sync_flag &= ~SDTR_TARGET;
1026 target->sync_flag |= SDTR_DONE;
1027
1028 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1029 "Unknown SDTR from target is reached, fall back to async.");
1030 }
1031
1032 nsp32_dbg(NSP32_DEBUG_TARGETFLAG,
1033 "target: %d sync_flag: 0x%x syncreg: 0x%x ackwidth: 0x%x",
1034 SCpnt->device->id, target->sync_flag, target->syncreg,
1035 target->ackwidth);
1036
1037 /* Selection */
1038 if (auto_param == 0) {
1039 ret = nsp32_selection_autopara(SCpnt);
1040 } else {
1041 ret = nsp32_selection_autoscsi(SCpnt);
1042 }
1043
1044 if (ret != TRUE) {
1045 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "selection fail");
1046 nsp32_scsi_done(SCpnt);
1047 }
1048
1049 return 0;
1050}
1051
1052static DEF_SCSI_QCMD(nsp32_queuecommand)
1053
1054/* initialize asic */
1055static int nsp32hw_init(nsp32_hw_data *data)
1056{
1057 unsigned int base = data->BaseAddress;
1058 unsigned short irq_stat;
1059 unsigned long lc_reg;
1060 unsigned char power;
1061
1062 lc_reg = nsp32_index_read4(base, CFG_LATE_CACHE);
1063 if ((lc_reg & 0xff00) == 0) {
1064 lc_reg |= (0x20 << 8);
1065 nsp32_index_write2(base, CFG_LATE_CACHE, lc_reg & 0xffff);
1066 }
1067
1068 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
1069 nsp32_write2(base, TRANSFER_CONTROL, 0);
1070 nsp32_write4(base, BM_CNT, 0);
1071 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
1072
1073 do {
1074 irq_stat = nsp32_read2(base, IRQ_STATUS);
1075 nsp32_dbg(NSP32_DEBUG_INIT, "irq_stat 0x%x", irq_stat);
1076 } while (irq_stat & IRQSTATUS_ANY_IRQ);
1077
1078 /*
1079 * Fill FIFO_FULL_SHLD, FIFO_EMPTY_SHLD. Below parameter is
1080 * designated by specification.
1081 */
1082 if ((data->trans_method & NSP32_TRANSFER_PIO) ||
1083 (data->trans_method & NSP32_TRANSFER_MMIO)) {
1084 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x40);
1085 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x40);
1086 } else if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
1087 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x10);
1088 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x60);
1089 } else {
1090 nsp32_dbg(NSP32_DEBUG_INIT, "unknown transfer mode");
1091 }
1092
1093 nsp32_dbg(NSP32_DEBUG_INIT, "full 0x%x emp 0x%x",
1094 nsp32_index_read1(base, FIFO_FULL_SHLD_COUNT),
1095 nsp32_index_read1(base, FIFO_EMPTY_SHLD_COUNT));
1096
1097 nsp32_index_write1(base, CLOCK_DIV, data->clock);
1098 nsp32_index_write1(base, BM_CYCLE, MEMRD_CMD1 | SGT_AUTO_PARA_MEMED_CMD);
1099 nsp32_write1(base, PARITY_CONTROL, 0); /* parity check is disable */
1100
1101 /*
1102 * initialize MISC_WRRD register
1103 *
1104 * Note: Designated parameters is obeyed as following:
1105 * MISC_SCSI_DIRECTION_DETECTOR_SELECT: It must be set.
1106 * MISC_MASTER_TERMINATION_SELECT: It must be set.
1107 * MISC_BMREQ_NEGATE_TIMING_SEL: It should be set.
1108 * MISC_AUTOSEL_TIMING_SEL: It should be set.
1109 * MISC_BMSTOP_CHANGE2_NONDATA_PHASE: It should be set.
1110 * MISC_DELAYED_BMSTART: It's selected for safety.
1111 *
1112 * Note: If MISC_BMSTOP_CHANGE2_NONDATA_PHASE is set, then
1113 * we have to set TRANSFERCONTROL_BM_START as 0 and set
1114 * appropriate value before restarting bus master transfer.
1115 */
1116 nsp32_index_write2(base, MISC_WR,
1117 (SCSI_DIRECTION_DETECTOR_SELECT |
1118 DELAYED_BMSTART |
1119 MASTER_TERMINATION_SELECT |
1120 BMREQ_NEGATE_TIMING_SEL |
1121 AUTOSEL_TIMING_SEL |
1122 BMSTOP_CHANGE2_NONDATA_PHASE));
1123
1124 nsp32_index_write1(base, TERM_PWR_CONTROL, 0);
1125 power = nsp32_index_read1(base, TERM_PWR_CONTROL);
1126 if (!(power & SENSE)) {
1127 nsp32_msg(KERN_INFO, "term power on");
1128 nsp32_index_write1(base, TERM_PWR_CONTROL, BPWR);
1129 }
1130
1131 nsp32_write2(base, TIMER_SET, TIMER_STOP);
1132 nsp32_write2(base, TIMER_SET, TIMER_STOP); /* Required 2 times */
1133
1134 nsp32_write1(base, SYNC_REG, 0);
1135 nsp32_write1(base, ACK_WIDTH, 0);
1136 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
1137
1138 /*
1139 * enable to select designated IRQ (except for
1140 * IRQSELECT_SERR, IRQSELECT_PERR, IRQSELECT_BMCNTERR)
1141 */
1142 nsp32_index_write2(base, IRQ_SELECT, IRQSELECT_TIMER_IRQ |
1143 IRQSELECT_SCSIRESET_IRQ |
1144 IRQSELECT_FIFO_SHLD_IRQ |
1145 IRQSELECT_RESELECT_IRQ |
1146 IRQSELECT_PHASE_CHANGE_IRQ |
1147 IRQSELECT_AUTO_SCSI_SEQ_IRQ |
1148 // IRQSELECT_BMCNTERR_IRQ |
1149 IRQSELECT_TARGET_ABORT_IRQ |
1150 IRQSELECT_MASTER_ABORT_IRQ );
1151 nsp32_write2(base, IRQ_CONTROL, 0);
1152
1153 /* PCI LED off */
1154 nsp32_index_write1(base, EXT_PORT_DDR, LED_OFF);
1155 nsp32_index_write1(base, EXT_PORT, LED_OFF);
1156
1157 return TRUE;
1158}
1159
1160
1161/* interrupt routine */
1162static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
1163{
1164 nsp32_hw_data *data = dev_id;
1165 unsigned int base = data->BaseAddress;
1166 struct scsi_cmnd *SCpnt = data->CurrentSC;
1167 unsigned short auto_stat, irq_stat, trans_stat;
1168 unsigned char busmon, busphase;
1169 unsigned long flags;
1170 int ret;
1171 int handled = 0;
1172 struct Scsi_Host *host = data->Host;
1173
1174 spin_lock_irqsave(host->host_lock, flags);
1175
1176 /*
1177 * IRQ check, then enable IRQ mask
1178 */
1179 irq_stat = nsp32_read2(base, IRQ_STATUS);
1180 nsp32_dbg(NSP32_DEBUG_INTR,
1181 "enter IRQ: %d, IRQstatus: 0x%x", irq, irq_stat);
1182 /* is this interrupt comes from Ninja asic? */
1183 if ((irq_stat & IRQSTATUS_ANY_IRQ) == 0) {
1184 nsp32_dbg(NSP32_DEBUG_INTR, "shared interrupt: irq other 0x%x", irq_stat);
1185 goto out2;
1186 }
1187 handled = 1;
1188 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
1189
1190 busmon = nsp32_read1(base, SCSI_BUS_MONITOR);
1191 busphase = busmon & BUSMON_PHASE_MASK;
1192
1193 trans_stat = nsp32_read2(base, TRANSFER_STATUS);
1194 if ((irq_stat == 0xffff) && (trans_stat == 0xffff)) {
1195 nsp32_msg(KERN_INFO, "card disconnect");
1196 if (data->CurrentSC != NULL) {
1197 nsp32_msg(KERN_INFO, "clean up current SCSI command");
1198 SCpnt->result = DID_BAD_TARGET << 16;
1199 nsp32_scsi_done(SCpnt);
1200 }
1201 goto out;
1202 }
1203
1204 /* Timer IRQ */
1205 if (irq_stat & IRQSTATUS_TIMER_IRQ) {
1206 nsp32_dbg(NSP32_DEBUG_INTR, "timer stop");
1207 nsp32_write2(base, TIMER_SET, TIMER_STOP);
1208 goto out;
1209 }
1210
1211 /* SCSI reset */
1212 if (irq_stat & IRQSTATUS_SCSIRESET_IRQ) {
1213 nsp32_msg(KERN_INFO, "detected someone do bus reset");
1214 nsp32_do_bus_reset(data);
1215 if (SCpnt != NULL) {
1216 SCpnt->result = DID_RESET << 16;
1217 nsp32_scsi_done(SCpnt);
1218 }
1219 goto out;
1220 }
1221
1222 if (SCpnt == NULL) {
1223 nsp32_msg(KERN_WARNING, "SCpnt==NULL this can't be happened");
1224 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1225 goto out;
1226 }
1227
1228 /*
1229 * AutoSCSI Interrupt.
1230 * Note: This interrupt is occurred when AutoSCSI is finished. Then
1231 * check SCSIEXECUTEPHASE, and do appropriate action. Each phases are
1232 * recorded when AutoSCSI sequencer has been processed.
1233 */
1234 if(irq_stat & IRQSTATUS_AUTOSCSI_IRQ) {
1235 /* getting SCSI executed phase */
1236 auto_stat = nsp32_read2(base, SCSI_EXECUTE_PHASE);
1237 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
1238
1239 /* Selection Timeout, go busfree phase. */
1240 if (auto_stat & SELECTION_TIMEOUT) {
1241 nsp32_dbg(NSP32_DEBUG_INTR,
1242 "selection timeout occurred");
1243
1244 SCpnt->result = DID_TIME_OUT << 16;
1245 nsp32_scsi_done(SCpnt);
1246 goto out;
1247 }
1248
1249 if (auto_stat & MSGOUT_PHASE) {
1250 /*
1251 * MsgOut phase was processed.
1252 * If MSG_IN_OCCUER is not set, then MsgOut phase is
1253 * completed. Thus, msgout_len must reset. Otherwise,
1254 * nothing to do here. If MSG_OUT_OCCUER is occurred,
1255 * then we will encounter the condition and check.
1256 */
1257 if (!(auto_stat & MSG_IN_OCCUER) &&
1258 (data->msgout_len <= 3)) {
1259 /*
1260 * !MSG_IN_OCCUER && msgout_len <=3
1261 * ---> AutoSCSI with MSGOUTreg is processed.
1262 */
1263 data->msgout_len = 0;
1264 };
1265
1266 nsp32_dbg(NSP32_DEBUG_INTR, "MsgOut phase processed");
1267 }
1268
1269 if ((auto_stat & DATA_IN_PHASE) &&
1270 (scsi_get_resid(SCpnt) > 0) &&
1271 ((nsp32_read2(base, FIFO_REST_CNT) & FIFO_REST_MASK) != 0)) {
1272 printk( "auto+fifo\n");
1273 //nsp32_pio_read(SCpnt);
1274 }
1275
1276 if (auto_stat & (DATA_IN_PHASE | DATA_OUT_PHASE)) {
1277 /* DATA_IN_PHASE/DATA_OUT_PHASE was processed. */
1278 nsp32_dbg(NSP32_DEBUG_INTR,
1279 "Data in/out phase processed");
1280
1281 /* read BMCNT, SGT pointer addr */
1282 nsp32_dbg(NSP32_DEBUG_INTR, "BMCNT=0x%lx",
1283 nsp32_read4(base, BM_CNT));
1284 nsp32_dbg(NSP32_DEBUG_INTR, "addr=0x%lx",
1285 nsp32_read4(base, SGT_ADR));
1286 nsp32_dbg(NSP32_DEBUG_INTR, "SACK=0x%lx",
1287 nsp32_read4(base, SACK_CNT));
1288 nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx",
1289 nsp32_read4(base, SAVED_SACK_CNT));
1290
1291 scsi_set_resid(SCpnt, 0); /* all data transferred! */
1292 }
1293
1294 /*
1295 * MsgIn Occur
1296 */
1297 if (auto_stat & MSG_IN_OCCUER) {
1298 nsp32_msgin_occur(SCpnt, irq_stat, auto_stat);
1299 }
1300
1301 /*
1302 * MsgOut Occur
1303 */
1304 if (auto_stat & MSG_OUT_OCCUER) {
1305 nsp32_msgout_occur(SCpnt);
1306 }
1307
1308 /*
1309 * Bus Free Occur
1310 */
1311 if (auto_stat & BUS_FREE_OCCUER) {
1312 ret = nsp32_busfree_occur(SCpnt, auto_stat);
1313 if (ret == TRUE) {
1314 goto out;
1315 }
1316 }
1317
1318 if (auto_stat & STATUS_PHASE) {
1319 /*
1320 * Read CSB and substitute CSB for SCpnt->result
1321 * to save status phase stutas byte.
1322 * scsi error handler checks host_byte (DID_*:
1323 * low level driver to indicate status), then checks
1324 * status_byte (SCSI status byte).
1325 */
1326 SCpnt->result = (int)nsp32_read1(base, SCSI_CSB_IN);
1327 }
1328
1329 if (auto_stat & ILLEGAL_PHASE) {
1330 /* Illegal phase is detected. SACK is not back. */
1331 nsp32_msg(KERN_WARNING,
1332 "AUTO SCSI ILLEGAL PHASE OCCUR!!!!");
1333
1334 /* TODO: currently we don't have any action... bus reset? */
1335
1336 /*
1337 * To send back SACK, assert, wait, and negate.
1338 */
1339 nsp32_sack_assert(data);
1340 nsp32_wait_req(data, NEGATE);
1341 nsp32_sack_negate(data);
1342
1343 }
1344
1345 if (auto_stat & COMMAND_PHASE) {
1346 /* nothing to do */
1347 nsp32_dbg(NSP32_DEBUG_INTR, "Command phase processed");
1348 }
1349
1350 if (auto_stat & AUTOSCSI_BUSY) {
1351 /* AutoSCSI is running */
1352 }
1353
1354 show_autophase(auto_stat);
1355 }
1356
1357 /* FIFO_SHLD_IRQ */
1358 if (irq_stat & IRQSTATUS_FIFO_SHLD_IRQ) {
1359 nsp32_dbg(NSP32_DEBUG_INTR, "FIFO IRQ");
1360
1361 switch(busphase) {
1362 case BUSPHASE_DATA_OUT:
1363 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/write");
1364
1365 //nsp32_pio_write(SCpnt);
1366
1367 break;
1368
1369 case BUSPHASE_DATA_IN:
1370 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/read");
1371
1372 //nsp32_pio_read(SCpnt);
1373
1374 break;
1375
1376 case BUSPHASE_STATUS:
1377 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/status");
1378
1379 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1380
1381 break;
1382 default:
1383 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/other phase");
1384 nsp32_dbg(NSP32_DEBUG_INTR, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1385 show_busphase(busphase);
1386 break;
1387 }
1388
1389 goto out;
1390 }
1391
1392 /* Phase Change IRQ */
1393 if (irq_stat & IRQSTATUS_PHASE_CHANGE_IRQ) {
1394 nsp32_dbg(NSP32_DEBUG_INTR, "phase change IRQ");
1395
1396 switch(busphase) {
1397 case BUSPHASE_MESSAGE_IN:
1398 nsp32_dbg(NSP32_DEBUG_INTR, "phase chg/msg in");
1399 nsp32_msgin_occur(SCpnt, irq_stat, 0);
1400 break;
1401 default:
1402 nsp32_msg(KERN_WARNING, "phase chg/other phase?");
1403 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x\n",
1404 irq_stat, trans_stat);
1405 show_busphase(busphase);
1406 break;
1407 }
1408 goto out;
1409 }
1410
1411 /* PCI_IRQ */
1412 if (irq_stat & IRQSTATUS_PCI_IRQ) {
1413 nsp32_dbg(NSP32_DEBUG_INTR, "PCI IRQ occurred");
1414 /* Do nothing */
1415 }
1416
1417 /* BMCNTERR_IRQ */
1418 if (irq_stat & IRQSTATUS_BMCNTERR_IRQ) {
1419 nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
1420 /*
1421 * TODO: To be implemented improving bus master
1422 * transfer reliability when BMCNTERR is occurred in
1423 * AutoSCSI phase described in specification.
1424 */
1425 }
1426
1427#if 0
1428 nsp32_dbg(NSP32_DEBUG_INTR,
1429 "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1430 show_busphase(busphase);
1431#endif
1432
1433 out:
1434 /* disable IRQ mask */
1435 nsp32_write2(base, IRQ_CONTROL, 0);
1436
1437 out2:
1438 spin_unlock_irqrestore(host->host_lock, flags);
1439
1440 nsp32_dbg(NSP32_DEBUG_INTR, "exit");
1441
1442 return IRQ_RETVAL(handled);
1443}
1444
1445#undef SPRINTF
1446#define SPRINTF(args...) \
1447 do { \
1448 if(length > (pos - buffer)) { \
1449 pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \
1450 nsp32_dbg(NSP32_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\
1451 } \
1452 } while(0)
1453
1454static int nsp32_proc_info(struct Scsi_Host *host, char *buffer, char **start,
1455 off_t offset, int length, int inout)
1456{
1457 char *pos = buffer;
1458 int thislength;
1459 unsigned long flags;
1460 nsp32_hw_data *data;
1461 int hostno;
1462 unsigned int base;
1463 unsigned char mode_reg;
1464 int id, speed;
1465 long model;
1466
1467 /* Write is not supported, just return. */
1468 if (inout == TRUE) {
1469 return -EINVAL;
1470 }
1471
1472 hostno = host->host_no;
1473 data = (nsp32_hw_data *)host->hostdata;
1474 base = host->io_port;
1475
1476 SPRINTF("NinjaSCSI-32 status\n\n");
1477 SPRINTF("Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
1478 SPRINTF("SCSI host No.: %d\n", hostno);
1479 SPRINTF("IRQ: %d\n", host->irq);
1480 SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
1481 SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
1482 SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
1483 SPRINTF("Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
1484
1485 mode_reg = nsp32_index_read1(base, CHIP_MODE);
1486 model = data->pci_devid->driver_data;
1487
1488#ifdef CONFIG_PM
1489 SPRINTF("Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
1490#endif
1491 SPRINTF("OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
1492
1493 spin_lock_irqsave(&(data->Lock), flags);
1494 SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
1495 spin_unlock_irqrestore(&(data->Lock), flags);
1496
1497
1498 SPRINTF("SDTR status\n");
1499 for (id = 0; id < ARRAY_SIZE(data->target); id++) {
1500
1501 SPRINTF("id %d: ", id);
1502
1503 if (id == host->this_id) {
1504 SPRINTF("----- NinjaSCSI-32 host adapter\n");
1505 continue;
1506 }
1507
1508 if (data->target[id].sync_flag == SDTR_DONE) {
1509 if (data->target[id].period == 0 &&
1510 data->target[id].offset == ASYNC_OFFSET ) {
1511 SPRINTF("async");
1512 } else {
1513 SPRINTF(" sync");
1514 }
1515 } else {
1516 SPRINTF(" none");
1517 }
1518
1519 if (data->target[id].period != 0) {
1520
1521 speed = 1000000 / (data->target[id].period * 4);
1522
1523 SPRINTF(" transfer %d.%dMB/s, offset %d",
1524 speed / 1000,
1525 speed % 1000,
1526 data->target[id].offset
1527 );
1528 }
1529 SPRINTF("\n");
1530 }
1531
1532
1533 thislength = pos - (buffer + offset);
1534
1535 if(thislength < 0) {
1536 *start = NULL;
1537 return 0;
1538 }
1539
1540
1541 thislength = min(thislength, length);
1542 *start = buffer + offset;
1543
1544 return thislength;
1545}
1546#undef SPRINTF
1547
1548
1549
1550/*
1551 * Reset parameters and call scsi_done for data->cur_lunt.
1552 * Be careful setting SCpnt->result = DID_* before calling this function.
1553 */
1554static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
1555{
1556 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1557 unsigned int base = SCpnt->device->host->io_port;
1558
1559 scsi_dma_unmap(SCpnt);
1560
1561 /*
1562 * clear TRANSFERCONTROL_BM_START
1563 */
1564 nsp32_write2(base, TRANSFER_CONTROL, 0);
1565 nsp32_write4(base, BM_CNT, 0);
1566
1567 /*
1568 * call scsi_done
1569 */
1570 (*SCpnt->scsi_done)(SCpnt);
1571
1572 /*
1573 * reset parameters
1574 */
1575 data->cur_lunt->SCpnt = NULL;
1576 data->cur_lunt = NULL;
1577 data->cur_target = NULL;
1578 data->CurrentSC = NULL;
1579}
1580
1581
1582/*
1583 * Bus Free Occur
1584 *
1585 * Current Phase is BUSFREE. AutoSCSI is automatically execute BUSFREE phase
1586 * with ACK reply when below condition is matched:
1587 * MsgIn 00: Command Complete.
1588 * MsgIn 02: Save Data Pointer.
1589 * MsgIn 04: Diconnect.
1590 * In other case, unexpected BUSFREE is detected.
1591 */
1592static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
1593{
1594 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1595 unsigned int base = SCpnt->device->host->io_port;
1596
1597 nsp32_dbg(NSP32_DEBUG_BUSFREE, "enter execph=0x%x", execph);
1598 show_autophase(execph);
1599
1600 nsp32_write4(base, BM_CNT, 0);
1601 nsp32_write2(base, TRANSFER_CONTROL, 0);
1602
1603 /*
1604 * MsgIn 02: Save Data Pointer
1605 *
1606 * VALID:
1607 * Save Data Pointer is received. Adjust pointer.
1608 *
1609 * NO-VALID:
1610 * SCSI-3 says if Save Data Pointer is not received, then we restart
1611 * processing and we can't adjust any SCSI data pointer in next data
1612 * phase.
1613 */
1614 if (execph & MSGIN_02_VALID) {
1615 nsp32_dbg(NSP32_DEBUG_BUSFREE, "MsgIn02_Valid");
1616
1617 /*
1618 * Check sack_cnt/saved_sack_cnt, then adjust sg table if
1619 * needed.
1620 */
1621 if (!(execph & MSGIN_00_VALID) &&
1622 ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE))) {
1623 unsigned int sacklen, s_sacklen;
1624
1625 /*
1626 * Read SACK count and SAVEDSACK count, then compare.
1627 */
1628 sacklen = nsp32_read4(base, SACK_CNT );
1629 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT);
1630
1631 /*
1632 * If SAVEDSACKCNT == 0, it means SavedDataPointer is
1633 * come after data transferring.
1634 */
1635 if (s_sacklen > 0) {
1636 /*
1637 * Comparing between sack and savedsack to
1638 * check the condition of AutoMsgIn03.
1639 *
1640 * If they are same, set msgin03 == TRUE,
1641 * COMMANDCONTROL_AUTO_MSGIN_03 is enabled at
1642 * reselection. On the other hand, if they
1643 * aren't same, set msgin03 == FALSE, and
1644 * COMMANDCONTROL_AUTO_MSGIN_03 is disabled at
1645 * reselection.
1646 */
1647 if (sacklen != s_sacklen) {
1648 data->cur_lunt->msgin03 = FALSE;
1649 } else {
1650 data->cur_lunt->msgin03 = TRUE;
1651 }
1652
1653 nsp32_adjust_busfree(SCpnt, s_sacklen);
1654 }
1655 }
1656
1657 /* This value has not substitude with valid value yet... */
1658 //data->cur_lunt->save_datp = data->cur_datp;
1659 } else {
1660 /*
1661 * no processing.
1662 */
1663 }
1664
1665 if (execph & MSGIN_03_VALID) {
1666 /* MsgIn03 was valid to be processed. No need processing. */
1667 }
1668
1669 /*
1670 * target SDTR check
1671 */
1672 if (data->cur_target->sync_flag & SDTR_INITIATOR) {
1673 /*
1674 * SDTR negotiation pulled by the initiator has not
1675 * finished yet. Fall back to ASYNC mode.
1676 */
1677 nsp32_set_async(data, data->cur_target);
1678 data->cur_target->sync_flag &= ~SDTR_INITIATOR;
1679 data->cur_target->sync_flag |= SDTR_DONE;
1680 } else if (data->cur_target->sync_flag & SDTR_TARGET) {
1681 /*
1682 * SDTR negotiation pulled by the target has been
1683 * negotiating.
1684 */
1685 if (execph & (MSGIN_00_VALID | MSGIN_04_VALID)) {
1686 /*
1687 * If valid message is received, then
1688 * negotiation is succeeded.
1689 */
1690 } else {
1691 /*
1692 * On the contrary, if unexpected bus free is
1693 * occurred, then negotiation is failed. Fall
1694 * back to ASYNC mode.
1695 */
1696 nsp32_set_async(data, data->cur_target);
1697 }
1698 data->cur_target->sync_flag &= ~SDTR_TARGET;
1699 data->cur_target->sync_flag |= SDTR_DONE;
1700 }
1701
1702 /*
1703 * It is always ensured by SCSI standard that initiator
1704 * switches into Bus Free Phase after
1705 * receiving message 00 (Command Complete), 04 (Disconnect).
1706 * It's the reason that processing here is valid.
1707 */
1708 if (execph & MSGIN_00_VALID) {
1709 /* MsgIn 00: Command Complete */
1710 nsp32_dbg(NSP32_DEBUG_BUSFREE, "command complete");
1711
1712 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1713 SCpnt->SCp.Message = 0;
1714 nsp32_dbg(NSP32_DEBUG_BUSFREE,
1715 "normal end stat=0x%x resid=0x%x\n",
1716 SCpnt->SCp.Status, scsi_get_resid(SCpnt));
1717 SCpnt->result = (DID_OK << 16) |
1718 (SCpnt->SCp.Message << 8) |
1719 (SCpnt->SCp.Status << 0);
1720 nsp32_scsi_done(SCpnt);
1721 /* All operation is done */
1722 return TRUE;
1723 } else if (execph & MSGIN_04_VALID) {
1724 /* MsgIn 04: Disconnect */
1725 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1726 SCpnt->SCp.Message = 4;
1727
1728 nsp32_dbg(NSP32_DEBUG_BUSFREE, "disconnect");
1729 return TRUE;
1730 } else {
1731 /* Unexpected bus free */
1732 nsp32_msg(KERN_WARNING, "unexpected bus free occurred");
1733
1734 /* DID_ERROR? */
1735 //SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Message << 8) | (SCpnt->SCp.Status << 0);
1736 SCpnt->result = DID_ERROR << 16;
1737 nsp32_scsi_done(SCpnt);
1738 return TRUE;
1739 }
1740 return FALSE;
1741}
1742
1743
1744/*
1745 * nsp32_adjust_busfree - adjusting SG table
1746 *
1747 * Note: This driver adjust the SG table using SCSI ACK
1748 * counter instead of BMCNT counter!
1749 */
1750static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen)
1751{
1752 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1753 int old_entry = data->cur_entry;
1754 int new_entry;
1755 int sg_num = data->cur_lunt->sg_num;
1756 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
1757 unsigned int restlen, sentlen;
1758 u32_le len, addr;
1759
1760 nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", scsi_get_resid(SCpnt));
1761
1762 /* adjust saved SACK count with 4 byte start address boundary */
1763 s_sacklen -= le32_to_cpu(sgt[old_entry].addr) & 3;
1764
1765 /*
1766 * calculate new_entry from sack count and each sgt[].len
1767 * calculate the byte which is intent to send
1768 */
1769 sentlen = 0;
1770 for (new_entry = old_entry; new_entry < sg_num; new_entry++) {
1771 sentlen += (le32_to_cpu(sgt[new_entry].len) & ~SGTEND);
1772 if (sentlen > s_sacklen) {
1773 break;
1774 }
1775 }
1776
1777 /* all sgt is processed */
1778 if (new_entry == sg_num) {
1779 goto last;
1780 }
1781
1782 if (sentlen == s_sacklen) {
1783 /* XXX: confirm it's ok or not */
1784 /* In this case, it's ok because we are at
1785 the head element of the sg. restlen is correctly calculated. */
1786 }
1787
1788 /* calculate the rest length for transferring */
1789 restlen = sentlen - s_sacklen;
1790
1791 /* update adjusting current SG table entry */
1792 len = le32_to_cpu(sgt[new_entry].len);
1793 addr = le32_to_cpu(sgt[new_entry].addr);
1794 addr += (len - restlen);
1795 sgt[new_entry].addr = cpu_to_le32(addr);
1796 sgt[new_entry].len = cpu_to_le32(restlen);
1797
1798 /* set cur_entry with new_entry */
1799 data->cur_entry = new_entry;
1800
1801 return;
1802
1803 last:
1804 if (scsi_get_resid(SCpnt) < sentlen) {
1805 nsp32_msg(KERN_ERR, "resid underflow");
1806 }
1807
1808 scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) - sentlen);
1809 nsp32_dbg(NSP32_DEBUG_SGLIST, "new resid=0x%x", scsi_get_resid(SCpnt));
1810
1811 /* update hostdata and lun */
1812
1813 return;
1814}
1815
1816
1817/*
1818 * It's called MsgOut phase occur.
1819 * NinjaSCSI-32Bi/UDE automatically processes up to 3 messages in
1820 * message out phase. It, however, has more than 3 messages,
1821 * HBA creates the interrupt and we have to process by hand.
1822 */
1823static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)
1824{
1825 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1826 unsigned int base = SCpnt->device->host->io_port;
1827 //unsigned short command;
1828 long new_sgtp;
1829 int i;
1830
1831 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
1832 "enter: msgout_len: 0x%x", data->msgout_len);
1833
1834 /*
1835 * If MsgOut phase is occurred without having any
1836 * message, then No_Operation is sent (SCSI-2).
1837 */
1838 if (data->msgout_len == 0) {
1839 nsp32_build_nop(SCpnt);
1840 }
1841
1842 /*
1843 * Set SGTP ADDR current entry for restarting AUTOSCSI,
1844 * because SGTP is incremented next point.
1845 * There is few statement in the specification...
1846 */
1847 new_sgtp = data->cur_lunt->sglun_paddr +
1848 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
1849
1850 /*
1851 * send messages
1852 */
1853 for (i = 0; i < data->msgout_len; i++) {
1854 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
1855 "%d : 0x%x", i, data->msgoutbuf[i]);
1856
1857 /*
1858 * Check REQ is asserted.
1859 */
1860 nsp32_wait_req(data, ASSERT);
1861
1862 if (i == (data->msgout_len - 1)) {
1863 /*
1864 * If the last message, set the AutoSCSI restart
1865 * before send back the ack message. AutoSCSI
1866 * restart automatically negate ATN signal.
1867 */
1868 //command = (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02);
1869 //nsp32_restart_autoscsi(SCpnt, command);
1870 nsp32_write2(base, COMMAND_CONTROL,
1871 (CLEAR_CDB_FIFO_POINTER |
1872 AUTO_COMMAND_PHASE |
1873 AUTOSCSI_RESTART |
1874 AUTO_MSGIN_00_OR_04 |
1875 AUTO_MSGIN_02 ));
1876 }
1877 /*
1878 * Write data with SACK, then wait sack is
1879 * automatically negated.
1880 */
1881 nsp32_write1(base, SCSI_DATA_WITH_ACK, data->msgoutbuf[i]);
1882 nsp32_wait_sack(data, NEGATE);
1883
1884 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "bus: 0x%x\n",
1885 nsp32_read1(base, SCSI_BUS_MONITOR));
1886 };
1887
1888 data->msgout_len = 0;
1889
1890 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "exit");
1891}
1892
1893/*
1894 * Restart AutoSCSI
1895 *
1896 * Note: Restarting AutoSCSI needs set:
1897 * SYNC_REG, ACK_WIDTH, SGT_ADR, TRANSFER_CONTROL
1898 */
1899static void nsp32_restart_autoscsi(struct scsi_cmnd *SCpnt, unsigned short command)
1900{
1901 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1902 unsigned int base = data->BaseAddress;
1903 unsigned short transfer = 0;
1904
1905 nsp32_dbg(NSP32_DEBUG_RESTART, "enter");
1906
1907 if (data->cur_target == NULL || data->cur_lunt == NULL) {
1908 nsp32_msg(KERN_ERR, "Target or Lun is invalid");
1909 }
1910
1911 /*
1912 * set SYNC_REG
1913 * Don't set BM_START_ADR before setting this register.
1914 */
1915 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg);
1916
1917 /*
1918 * set ACKWIDTH
1919 */
1920 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth);
1921
1922 /*
1923 * set SREQ hazard killer sampling rate
1924 */
1925 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg);
1926
1927 /*
1928 * set SGT ADDR (physical address)
1929 */
1930 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr);
1931
1932 /*
1933 * set TRANSFER CONTROL REG
1934 */
1935 transfer = 0;
1936 transfer |= (TRANSFER_GO | ALL_COUNTER_CLR);
1937 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
1938 if (scsi_bufflen(SCpnt) > 0) {
1939 transfer |= BM_START;
1940 }
1941 } else if (data->trans_method & NSP32_TRANSFER_MMIO) {
1942 transfer |= CB_MMIO_MODE;
1943 } else if (data->trans_method & NSP32_TRANSFER_PIO) {
1944 transfer |= CB_IO_MODE;
1945 }
1946 nsp32_write2(base, TRANSFER_CONTROL, transfer);
1947
1948 /*
1949 * restart AutoSCSI
1950 *
1951 * TODO: COMMANDCONTROL_AUTO_COMMAND_PHASE is needed ?
1952 */
1953 command |= (CLEAR_CDB_FIFO_POINTER |
1954 AUTO_COMMAND_PHASE |
1955 AUTOSCSI_RESTART );
1956 nsp32_write2(base, COMMAND_CONTROL, command);
1957
1958 nsp32_dbg(NSP32_DEBUG_RESTART, "exit");
1959}
1960
1961
1962/*
1963 * cannot run automatically message in occur
1964 */
1965static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
1966 unsigned long irq_status,
1967 unsigned short execph)
1968{
1969 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1970 unsigned int base = SCpnt->device->host->io_port;
1971 unsigned char msg;
1972 unsigned char msgtype;
1973 unsigned char newlun;
1974 unsigned short command = 0;
1975 int msgclear = TRUE;
1976 long new_sgtp;
1977 int ret;
1978
1979 /*
1980 * read first message
1981 * Use SCSIDATA_W_ACK instead of SCSIDATAIN, because the procedure
1982 * of Message-In have to be processed before sending back SCSI ACK.
1983 */
1984 msg = nsp32_read1(base, SCSI_DATA_IN);
1985 data->msginbuf[(unsigned char)data->msgin_len] = msg;
1986 msgtype = data->msginbuf[0];
1987 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR,
1988 "enter: msglen: 0x%x msgin: 0x%x msgtype: 0x%x",
1989 data->msgin_len, msg, msgtype);
1990
1991 /*
1992 * TODO: We need checking whether bus phase is message in?
1993 */
1994
1995 /*
1996 * assert SCSI ACK
1997 */
1998 nsp32_sack_assert(data);
1999
2000 /*
2001 * processing IDENTIFY
2002 */
2003 if (msgtype & 0x80) {
2004 if (!(irq_status & IRQSTATUS_RESELECT_OCCUER)) {
2005 /* Invalid (non reselect) phase */
2006 goto reject;
2007 }
2008
2009 newlun = msgtype & 0x1f; /* TODO: SPI-3 compliant? */
2010 ret = nsp32_reselection(SCpnt, newlun);
2011 if (ret == TRUE) {
2012 goto restart;
2013 } else {
2014 goto reject;
2015 }
2016 }
2017
2018 /*
2019 * processing messages except for IDENTIFY
2020 *
2021 * TODO: Messages are all SCSI-2 terminology. SCSI-3 compliance is TODO.
2022 */
2023 switch (msgtype) {
2024 /*
2025 * 1-byte message
2026 */
2027 case COMMAND_COMPLETE:
2028 case DISCONNECT:
2029 /*
2030 * These messages should not be occurred.
2031 * They should be processed on AutoSCSI sequencer.
2032 */
2033 nsp32_msg(KERN_WARNING,
2034 "unexpected message of AutoSCSI MsgIn: 0x%x", msg);
2035 break;
2036
2037 case RESTORE_POINTERS:
2038 /*
2039 * AutoMsgIn03 is disabled, and HBA gets this message.
2040 */
2041
2042 if ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE)) {
2043 unsigned int s_sacklen;
2044
2045 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT);
2046 if ((execph & MSGIN_02_VALID) && (s_sacklen > 0)) {
2047 nsp32_adjust_busfree(SCpnt, s_sacklen);
2048 } else {
2049 /* No need to rewrite SGT */
2050 }
2051 }
2052 data->cur_lunt->msgin03 = FALSE;
2053
2054 /* Update with the new value */
2055
2056 /* reset SACK/SavedACK counter (or ALL clear?) */
2057 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
2058
2059 /*
2060 * set new sg pointer
2061 */
2062 new_sgtp = data->cur_lunt->sglun_paddr +
2063 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
2064 nsp32_write4(base, SGT_ADR, new_sgtp);
2065
2066 break;
2067
2068 case SAVE_POINTERS:
2069 /*
2070 * These messages should not be occurred.
2071 * They should be processed on AutoSCSI sequencer.
2072 */
2073 nsp32_msg (KERN_WARNING,
2074 "unexpected message of AutoSCSI MsgIn: SAVE_POINTERS");
2075
2076 break;
2077
2078 case MESSAGE_REJECT:
2079 /* If previous message_out is sending SDTR, and get
2080 message_reject from target, SDTR negotiation is failed */
2081 if (data->cur_target->sync_flag &
2082 (SDTR_INITIATOR | SDTR_TARGET)) {
2083 /*
2084 * Current target is negotiating SDTR, but it's
2085 * failed. Fall back to async transfer mode, and set
2086 * SDTR_DONE.
2087 */
2088 nsp32_set_async(data, data->cur_target);
2089 data->cur_target->sync_flag &= ~SDTR_INITIATOR;
2090 data->cur_target->sync_flag |= SDTR_DONE;
2091
2092 }
2093 break;
2094
2095 case LINKED_CMD_COMPLETE:
2096 case LINKED_FLG_CMD_COMPLETE:
2097 /* queue tag is not supported currently */
2098 nsp32_msg (KERN_WARNING,
2099 "unsupported message: 0x%x", msgtype);
2100 break;
2101
2102 case INITIATE_RECOVERY:
2103 /* staring ECA (Extended Contingent Allegiance) state. */
2104 /* This message is declined in SPI2 or later. */
2105
2106 goto reject;
2107
2108 /*
2109 * 2-byte message
2110 */
2111 case SIMPLE_QUEUE_TAG:
2112 case 0x23:
2113 /*
2114 * 0x23: Ignore_Wide_Residue is not declared in scsi.h.
2115 * No support is needed.
2116 */
2117 if (data->msgin_len >= 1) {
2118 goto reject;
2119 }
2120
2121 /* current position is 1-byte of 2 byte */
2122 msgclear = FALSE;
2123
2124 break;
2125
2126 /*
2127 * extended message
2128 */
2129 case EXTENDED_MESSAGE:
2130 if (data->msgin_len < 1) {
2131 /*
2132 * Current position does not reach 2-byte
2133 * (2-byte is extended message length).
2134 */
2135 msgclear = FALSE;
2136 break;
2137 }
2138
2139 if ((data->msginbuf[1] + 1) > data->msgin_len) {
2140 /*
2141 * Current extended message has msginbuf[1] + 2
2142 * (msgin_len starts counting from 0, so buf[1] + 1).
2143 * If current message position is not finished,
2144 * continue receiving message.
2145 */
2146 msgclear = FALSE;
2147 break;
2148 }
2149
2150 /*
2151 * Reach here means regular length of each type of
2152 * extended messages.
2153 */
2154 switch (data->msginbuf[2]) {
2155 case EXTENDED_MODIFY_DATA_POINTER:
2156 /* TODO */
2157 goto reject; /* not implemented yet */
2158 break;
2159
2160 case EXTENDED_SDTR:
2161 /*
2162 * Exchange this message between initiator and target.
2163 */
2164 if (data->msgin_len != EXTENDED_SDTR_LEN + 1) {
2165 /*
2166 * received inappropriate message.
2167 */
2168 goto reject;
2169 break;
2170 }
2171
2172 nsp32_analyze_sdtr(SCpnt);
2173
2174 break;
2175
2176 case EXTENDED_EXTENDED_IDENTIFY:
2177 /* SCSI-I only, not supported. */
2178 goto reject; /* not implemented yet */
2179
2180 break;
2181
2182 case EXTENDED_WDTR:
2183 goto reject; /* not implemented yet */
2184
2185 break;
2186
2187 default:
2188 goto reject;
2189 }
2190 break;
2191
2192 default:
2193 goto reject;
2194 }
2195
2196 restart:
2197 if (msgclear == TRUE) {
2198 data->msgin_len = 0;
2199
2200 /*
2201 * If restarting AutoSCSI, but there are some message to out
2202 * (msgout_len > 0), set AutoATN, and set SCSIMSGOUT as 0
2203 * (MV_VALID = 0). When commandcontrol is written with
2204 * AutoSCSI restart, at the same time MsgOutOccur should be
2205 * happened (however, such situation is really possible...?).
2206 */
2207 if (data->msgout_len > 0) {
2208 nsp32_write4(base, SCSI_MSG_OUT, 0);
2209 command |= AUTO_ATN;
2210 }
2211
2212 /*
2213 * restart AutoSCSI
2214 * If it's failed, COMMANDCONTROL_AUTO_COMMAND_PHASE is needed.
2215 */
2216 command |= (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02);
2217
2218 /*
2219 * If current msgin03 is TRUE, then flag on.
2220 */
2221 if (data->cur_lunt->msgin03 == TRUE) {
2222 command |= AUTO_MSGIN_03;
2223 }
2224 data->cur_lunt->msgin03 = FALSE;
2225 } else {
2226 data->msgin_len++;
2227 }
2228
2229 /*
2230 * restart AutoSCSI
2231 */
2232 nsp32_restart_autoscsi(SCpnt, command);
2233
2234 /*
2235 * wait SCSI REQ negate for REQ-ACK handshake
2236 */
2237 nsp32_wait_req(data, NEGATE);
2238
2239 /*
2240 * negate SCSI ACK
2241 */
2242 nsp32_sack_negate(data);
2243
2244 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit");
2245
2246 return;
2247
2248 reject:
2249 nsp32_msg(KERN_WARNING,
2250 "invalid or unsupported MessageIn, rejected. "
2251 "current msg: 0x%x (len: 0x%x), processing msg: 0x%x",
2252 msg, data->msgin_len, msgtype);
2253 nsp32_build_reject(SCpnt);
2254 data->msgin_len = 0;
2255
2256 goto restart;
2257}
2258
2259/*
2260 *
2261 */
2262static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
2263{
2264 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2265 nsp32_target *target = data->cur_target;
2266 nsp32_sync_table *synct;
2267 unsigned char get_period = data->msginbuf[3];
2268 unsigned char get_offset = data->msginbuf[4];
2269 int entry;
2270 int syncnum;
2271
2272 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "enter");
2273
2274 synct = data->synct;
2275 syncnum = data->syncnum;
2276
2277 /*
2278 * If this inititor sent the SDTR message, then target responds SDTR,
2279 * initiator SYNCREG, ACKWIDTH from SDTR parameter.
2280 * Messages are not appropriate, then send back reject message.
2281 * If initiator did not send the SDTR, but target sends SDTR,
2282 * initiator calculator the appropriate parameter and send back SDTR.
2283 */
2284 if (target->sync_flag & SDTR_INITIATOR) {
2285 /*
2286 * Initiator sent SDTR, the target responds and
2287 * send back negotiation SDTR.
2288 */
2289 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target responds SDTR");
2290
2291 target->sync_flag &= ~SDTR_INITIATOR;
2292 target->sync_flag |= SDTR_DONE;
2293
2294 /*
2295 * offset:
2296 */
2297 if (get_offset > SYNC_OFFSET) {
2298 /*
2299 * Negotiation is failed, the target send back
2300 * unexpected offset value.
2301 */
2302 goto reject;
2303 }
2304
2305 if (get_offset == ASYNC_OFFSET) {
2306 /*
2307 * Negotiation is succeeded, the target want
2308 * to fall back into asynchronous transfer mode.
2309 */
2310 goto async;
2311 }
2312
2313 /*
2314 * period:
2315 * Check whether sync period is too short. If too short,
2316 * fall back to async mode. If it's ok, then investigate
2317 * the received sync period. If sync period is acceptable
2318 * between sync table start_period and end_period, then
2319 * set this I_T nexus as sent offset and period.
2320 * If it's not acceptable, send back reject and fall back
2321 * to async mode.
2322 */
2323 if (get_period < data->synct[0].period_num) {
2324 /*
2325 * Negotiation is failed, the target send back
2326 * unexpected period value.
2327 */
2328 goto reject;
2329 }
2330
2331 entry = nsp32_search_period_entry(data, target, get_period);
2332
2333 if (entry < 0) {
2334 /*
2335 * Target want to use long period which is not
2336 * acceptable NinjaSCSI-32Bi/UDE.
2337 */
2338 goto reject;
2339 }
2340
2341 /*
2342 * Set new sync table and offset in this I_T nexus.
2343 */
2344 nsp32_set_sync_entry(data, target, entry, get_offset);
2345 } else {
2346 /* Target send SDTR to initiator. */
2347 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target send SDTR");
2348
2349 target->sync_flag |= SDTR_INITIATOR;
2350
2351 /* offset: */
2352 if (get_offset > SYNC_OFFSET) {
2353 /* send back as SYNC_OFFSET */
2354 get_offset = SYNC_OFFSET;
2355 }
2356
2357 /* period: */
2358 if (get_period < data->synct[0].period_num) {
2359 get_period = data->synct[0].period_num;
2360 }
2361
2362 entry = nsp32_search_period_entry(data, target, get_period);
2363
2364 if (get_offset == ASYNC_OFFSET || entry < 0) {
2365 nsp32_set_async(data, target);
2366 nsp32_build_sdtr(SCpnt, 0, ASYNC_OFFSET);
2367 } else {
2368 nsp32_set_sync_entry(data, target, entry, get_offset);
2369 nsp32_build_sdtr(SCpnt, get_period, get_offset);
2370 }
2371 }
2372
2373 target->period = get_period;
2374 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit");
2375 return;
2376
2377 reject:
2378 /*
2379 * If the current message is unacceptable, send back to the target
2380 * with reject message.
2381 */
2382 nsp32_build_reject(SCpnt);
2383
2384 async:
2385 nsp32_set_async(data, target); /* set as ASYNC transfer mode */
2386
2387 target->period = 0;
2388 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit: set async");
2389 return;
2390}
2391
2392
2393/*
2394 * Search config entry number matched in sync_table from given
2395 * target and speed period value. If failed to search, return negative value.
2396 */
2397static int nsp32_search_period_entry(nsp32_hw_data *data,
2398 nsp32_target *target,
2399 unsigned char period)
2400{
2401 int i;
2402
2403 if (target->limit_entry >= data->syncnum) {
2404 nsp32_msg(KERN_ERR, "limit_entry exceeds syncnum!");
2405 target->limit_entry = 0;
2406 }
2407
2408 for (i = target->limit_entry; i < data->syncnum; i++) {
2409 if (period >= data->synct[i].start_period &&
2410 period <= data->synct[i].end_period) {
2411 break;
2412 }
2413 }
2414
2415 /*
2416 * Check given period value is over the sync_table value.
2417 * If so, return max value.
2418 */
2419 if (i == data->syncnum) {
2420 i = -1;
2421 }
2422
2423 return i;
2424}
2425
2426
2427/*
2428 * target <-> initiator use ASYNC transfer
2429 */
2430static void nsp32_set_async(nsp32_hw_data *data, nsp32_target *target)
2431{
2432 unsigned char period = data->synct[target->limit_entry].period_num;
2433
2434 target->offset = ASYNC_OFFSET;
2435 target->period = 0;
2436 target->syncreg = TO_SYNCREG(period, ASYNC_OFFSET);
2437 target->ackwidth = 0;
2438 target->sample_reg = 0;
2439
2440 nsp32_dbg(NSP32_DEBUG_SYNC, "set async");
2441}
2442
2443
2444/*
2445 * target <-> initiator use maximum SYNC transfer
2446 */
2447static void nsp32_set_max_sync(nsp32_hw_data *data,
2448 nsp32_target *target,
2449 unsigned char *period,
2450 unsigned char *offset)
2451{
2452 unsigned char period_num, ackwidth;
2453
2454 period_num = data->synct[target->limit_entry].period_num;
2455 *period = data->synct[target->limit_entry].start_period;
2456 ackwidth = data->synct[target->limit_entry].ackwidth;
2457 *offset = SYNC_OFFSET;
2458
2459 target->syncreg = TO_SYNCREG(period_num, *offset);
2460 target->ackwidth = ackwidth;
2461 target->offset = *offset;
2462 target->sample_reg = 0; /* disable SREQ sampling */
2463}
2464
2465
2466/*
2467 * target <-> initiator use entry number speed
2468 */
2469static void nsp32_set_sync_entry(nsp32_hw_data *data,
2470 nsp32_target *target,
2471 int entry,
2472 unsigned char offset)
2473{
2474 unsigned char period, ackwidth, sample_rate;
2475
2476 period = data->synct[entry].period_num;
2477 ackwidth = data->synct[entry].ackwidth;
2478 offset = offset;
2479 sample_rate = data->synct[entry].sample_rate;
2480
2481 target->syncreg = TO_SYNCREG(period, offset);
2482 target->ackwidth = ackwidth;
2483 target->offset = offset;
2484 target->sample_reg = sample_rate | SAMPLING_ENABLE;
2485
2486 nsp32_dbg(NSP32_DEBUG_SYNC, "set sync");
2487}
2488
2489
2490/*
2491 * It waits until SCSI REQ becomes assertion or negation state.
2492 *
2493 * Note: If nsp32_msgin_occur is called, we asserts SCSI ACK. Then
2494 * connected target responds SCSI REQ negation. We have to wait
2495 * SCSI REQ becomes negation in order to negate SCSI ACK signal for
2496 * REQ-ACK handshake.
2497 */
2498static void nsp32_wait_req(nsp32_hw_data *data, int state)
2499{
2500 unsigned int base = data->BaseAddress;
2501 int wait_time = 0;
2502 unsigned char bus, req_bit;
2503
2504 if (!((state == ASSERT) || (state == NEGATE))) {
2505 nsp32_msg(KERN_ERR, "unknown state designation");
2506 }
2507 /* REQ is BIT(5) */
2508 req_bit = (state == ASSERT ? BUSMON_REQ : 0);
2509
2510 do {
2511 bus = nsp32_read1(base, SCSI_BUS_MONITOR);
2512 if ((bus & BUSMON_REQ) == req_bit) {
2513 nsp32_dbg(NSP32_DEBUG_WAIT,
2514 "wait_time: %d", wait_time);
2515 return;
2516 }
2517 udelay(1);
2518 wait_time++;
2519 } while (wait_time < REQSACK_TIMEOUT_TIME);
2520
2521 nsp32_msg(KERN_WARNING, "wait REQ timeout, req_bit: 0x%x", req_bit);
2522}
2523
2524/*
2525 * It waits until SCSI SACK becomes assertion or negation state.
2526 */
2527static void nsp32_wait_sack(nsp32_hw_data *data, int state)
2528{
2529 unsigned int base = data->BaseAddress;
2530 int wait_time = 0;
2531 unsigned char bus, ack_bit;
2532
2533 if (!((state == ASSERT) || (state == NEGATE))) {
2534 nsp32_msg(KERN_ERR, "unknown state designation");
2535 }
2536 /* ACK is BIT(4) */
2537 ack_bit = (state == ASSERT ? BUSMON_ACK : 0);
2538
2539 do {
2540 bus = nsp32_read1(base, SCSI_BUS_MONITOR);
2541 if ((bus & BUSMON_ACK) == ack_bit) {
2542 nsp32_dbg(NSP32_DEBUG_WAIT,
2543 "wait_time: %d", wait_time);
2544 return;
2545 }
2546 udelay(1);
2547 wait_time++;
2548 } while (wait_time < REQSACK_TIMEOUT_TIME);
2549
2550 nsp32_msg(KERN_WARNING, "wait SACK timeout, ack_bit: 0x%x", ack_bit);
2551}
2552
2553/*
2554 * assert SCSI ACK
2555 *
2556 * Note: SCSI ACK assertion needs with ACKENB=1, AUTODIRECTION=1.
2557 */
2558static void nsp32_sack_assert(nsp32_hw_data *data)
2559{
2560 unsigned int base = data->BaseAddress;
2561 unsigned char busctrl;
2562
2563 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL);
2564 busctrl |= (BUSCTL_ACK | AUTODIRECTION | ACKENB);
2565 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl);
2566}
2567
2568/*
2569 * negate SCSI ACK
2570 */
2571static void nsp32_sack_negate(nsp32_hw_data *data)
2572{
2573 unsigned int base = data->BaseAddress;
2574 unsigned char busctrl;
2575
2576 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL);
2577 busctrl &= ~BUSCTL_ACK;
2578 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl);
2579}
2580
2581
2582
2583/*
2584 * Note: n_io_port is defined as 0x7f because I/O register port is
2585 * assigned as:
2586 * 0x800-0x8ff: memory mapped I/O port
2587 * 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly)
2588 * 0xc00-0xfff: CardBus status registers
2589 */
2590static int nsp32_detect(struct pci_dev *pdev)
2591{
2592 struct Scsi_Host *host; /* registered host structure */
2593 struct resource *res;
2594 nsp32_hw_data *data;
2595 int ret;
2596 int i, j;
2597
2598 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
2599
2600 /*
2601 * register this HBA as SCSI device
2602 */
2603 host = scsi_host_alloc(&nsp32_template, sizeof(nsp32_hw_data));
2604 if (host == NULL) {
2605 nsp32_msg (KERN_ERR, "failed to scsi register");
2606 goto err;
2607 }
2608
2609 /*
2610 * set nsp32_hw_data
2611 */
2612 data = (nsp32_hw_data *)host->hostdata;
2613
2614 memcpy(data, &nsp32_data_base, sizeof(nsp32_hw_data));
2615
2616 host->irq = data->IrqNumber;
2617 host->io_port = data->BaseAddress;
2618 host->unique_id = data->BaseAddress;
2619 host->n_io_port = data->NumAddress;
2620 host->base = (unsigned long)data->MmioAddress;
2621
2622 data->Host = host;
2623 spin_lock_init(&(data->Lock));
2624
2625 data->cur_lunt = NULL;
2626 data->cur_target = NULL;
2627
2628 /*
2629 * Bus master transfer mode is supported currently.
2630 */
2631 data->trans_method = NSP32_TRANSFER_BUSMASTER;
2632
2633 /*
2634 * Set clock div, CLOCK_4 (HBA has own external clock, and
2635 * dividing * 100ns/4).
2636 * Currently CLOCK_4 has only tested, not for CLOCK_2/PCICLK yet.
2637 */
2638 data->clock = CLOCK_4;
2639
2640 /*
2641 * Select appropriate nsp32_sync_table and set I_CLOCKDIV.
2642 */
2643 switch (data->clock) {
2644 case CLOCK_4:
2645 /* If data->clock is CLOCK_4, then select 40M sync table. */
2646 data->synct = nsp32_sync_table_40M;
2647 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M);
2648 break;
2649 case CLOCK_2:
2650 /* If data->clock is CLOCK_2, then select 20M sync table. */
2651 data->synct = nsp32_sync_table_20M;
2652 data->syncnum = ARRAY_SIZE(nsp32_sync_table_20M);
2653 break;
2654 case PCICLK:
2655 /* If data->clock is PCICLK, then select pci sync table. */
2656 data->synct = nsp32_sync_table_pci;
2657 data->syncnum = ARRAY_SIZE(nsp32_sync_table_pci);
2658 break;
2659 default:
2660 nsp32_msg(KERN_WARNING,
2661 "Invalid clock div is selected, set CLOCK_4.");
2662 /* Use default value CLOCK_4 */
2663 data->clock = CLOCK_4;
2664 data->synct = nsp32_sync_table_40M;
2665 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M);
2666 }
2667
2668 /*
2669 * setup nsp32_lunt
2670 */
2671
2672 /*
2673 * setup DMA
2674 */
2675 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
2676 nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
2677 goto scsi_unregister;
2678 }
2679
2680 /*
2681 * allocate autoparam DMA resource.
2682 */
2683 data->autoparam = pci_alloc_consistent(pdev, sizeof(nsp32_autoparam), &(data->auto_paddr));
2684 if (data->autoparam == NULL) {
2685 nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
2686 goto scsi_unregister;
2687 }
2688
2689 /*
2690 * allocate scatter-gather DMA resource.
2691 */
2692 data->sg_list = pci_alloc_consistent(pdev, NSP32_SG_TABLE_SIZE,
2693 &(data->sg_paddr));
2694 if (data->sg_list == NULL) {
2695 nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
2696 goto free_autoparam;
2697 }
2698
2699 for (i = 0; i < ARRAY_SIZE(data->lunt); i++) {
2700 for (j = 0; j < ARRAY_SIZE(data->lunt[0]); j++) {
2701 int offset = i * ARRAY_SIZE(data->lunt[0]) + j;
2702 nsp32_lunt tmp = {
2703 .SCpnt = NULL,
2704 .save_datp = 0,
2705 .msgin03 = FALSE,
2706 .sg_num = 0,
2707 .cur_entry = 0,
2708 .sglun = &(data->sg_list[offset]),
2709 .sglun_paddr = data->sg_paddr + (offset * sizeof(nsp32_sglun)),
2710 };
2711
2712 data->lunt[i][j] = tmp;
2713 }
2714 }
2715
2716 /*
2717 * setup target
2718 */
2719 for (i = 0; i < ARRAY_SIZE(data->target); i++) {
2720 nsp32_target *target = &(data->target[i]);
2721
2722 target->limit_entry = 0;
2723 target->sync_flag = 0;
2724 nsp32_set_async(data, target);
2725 }
2726
2727 /*
2728 * EEPROM check
2729 */
2730 ret = nsp32_getprom_param(data);
2731 if (ret == FALSE) {
2732 data->resettime = 3; /* default 3 */
2733 }
2734
2735 /*
2736 * setup HBA
2737 */
2738 nsp32hw_init(data);
2739
2740 snprintf(data->info_str, sizeof(data->info_str),
2741 "NinjaSCSI-32Bi/UDE: irq %d, io 0x%lx+0x%x",
2742 host->irq, host->io_port, host->n_io_port);
2743
2744 /*
2745 * SCSI bus reset
2746 *
2747 * Note: It's important to reset SCSI bus in initialization phase.
2748 * NinjaSCSI-32Bi/UDE HBA EEPROM seems to exchange SDTR when
2749 * system is coming up, so SCSI devices connected to HBA is set as
2750 * un-asynchronous mode. It brings the merit that this HBA is
2751 * ready to start synchronous transfer without any preparation,
2752 * but we are difficult to control transfer speed. In addition,
2753 * it prevents device transfer speed from effecting EEPROM start-up
2754 * SDTR. NinjaSCSI-32Bi/UDE has the feature if EEPROM is set as
2755 * Auto Mode, then FAST-10M is selected when SCSI devices are
2756 * connected same or more than 4 devices. It should be avoided
2757 * depending on this specification. Thus, resetting the SCSI bus
2758 * restores all connected SCSI devices to asynchronous mode, then
2759 * this driver set SDTR safely later, and we can control all SCSI
2760 * device transfer mode.
2761 */
2762 nsp32_do_bus_reset(data);
2763
2764 ret = request_irq(host->irq, do_nsp32_isr, IRQF_SHARED, "nsp32", data);
2765 if (ret < 0) {
2766 nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 "
2767 "SCSI PCI controller. Interrupt: %d", host->irq);
2768 goto free_sg_list;
2769 }
2770
2771 /*
2772 * PCI IO register
2773 */
2774 res = request_region(host->io_port, host->n_io_port, "nsp32");
2775 if (res == NULL) {
2776 nsp32_msg(KERN_ERR,
2777 "I/O region 0x%lx+0x%lx is already used",
2778 data->BaseAddress, data->NumAddress);
2779 goto free_irq;
2780 }
2781
2782 ret = scsi_add_host(host, &pdev->dev);
2783 if (ret) {
2784 nsp32_msg(KERN_ERR, "failed to add scsi host");
2785 goto free_region;
2786 }
2787 scsi_scan_host(host);
2788 pci_set_drvdata(pdev, host);
2789 return 0;
2790
2791 free_region:
2792 release_region(host->io_port, host->n_io_port);
2793
2794 free_irq:
2795 free_irq(host->irq, data);
2796
2797 free_sg_list:
2798 pci_free_consistent(pdev, NSP32_SG_TABLE_SIZE,
2799 data->sg_list, data->sg_paddr);
2800
2801 free_autoparam:
2802 pci_free_consistent(pdev, sizeof(nsp32_autoparam),
2803 data->autoparam, data->auto_paddr);
2804
2805 scsi_unregister:
2806 scsi_host_put(host);
2807
2808 err:
2809 return 1;
2810}
2811
2812static int nsp32_release(struct Scsi_Host *host)
2813{
2814 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
2815
2816 if (data->autoparam) {
2817 pci_free_consistent(data->Pci, sizeof(nsp32_autoparam),
2818 data->autoparam, data->auto_paddr);
2819 }
2820
2821 if (data->sg_list) {
2822 pci_free_consistent(data->Pci, NSP32_SG_TABLE_SIZE,
2823 data->sg_list, data->sg_paddr);
2824 }
2825
2826 if (host->irq) {
2827 free_irq(host->irq, data);
2828 }
2829
2830 if (host->io_port && host->n_io_port) {
2831 release_region(host->io_port, host->n_io_port);
2832 }
2833
2834 if (data->MmioAddress) {
2835 iounmap(data->MmioAddress);
2836 }
2837
2838 return 0;
2839}
2840
2841static const char *nsp32_info(struct Scsi_Host *shpnt)
2842{
2843 nsp32_hw_data *data = (nsp32_hw_data *)shpnt->hostdata;
2844
2845 return data->info_str;
2846}
2847
2848
2849/****************************************************************************
2850 * error handler
2851 */
2852static int nsp32_eh_abort(struct scsi_cmnd *SCpnt)
2853{
2854 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2855 unsigned int base = SCpnt->device->host->io_port;
2856
2857 nsp32_msg(KERN_WARNING, "abort");
2858
2859 if (data->cur_lunt->SCpnt == NULL) {
2860 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort failed");
2861 return FAILED;
2862 }
2863
2864 if (data->cur_target->sync_flag & (SDTR_INITIATOR | SDTR_TARGET)) {
2865 /* reset SDTR negotiation */
2866 data->cur_target->sync_flag = 0;
2867 nsp32_set_async(data, data->cur_target);
2868 }
2869
2870 nsp32_write2(base, TRANSFER_CONTROL, 0);
2871 nsp32_write2(base, BM_CNT, 0);
2872
2873 SCpnt->result = DID_ABORT << 16;
2874 nsp32_scsi_done(SCpnt);
2875
2876 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort success");
2877 return SUCCESS;
2878}
2879
2880static int nsp32_eh_bus_reset(struct scsi_cmnd *SCpnt)
2881{
2882 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2883 unsigned int base = SCpnt->device->host->io_port;
2884
2885 spin_lock_irq(SCpnt->device->host->host_lock);
2886
2887 nsp32_msg(KERN_INFO, "Bus Reset");
2888 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
2889
2890 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
2891 nsp32_do_bus_reset(data);
2892 nsp32_write2(base, IRQ_CONTROL, 0);
2893
2894 spin_unlock_irq(SCpnt->device->host->host_lock);
2895 return SUCCESS; /* SCSI bus reset is succeeded at any time. */
2896}
2897
2898static void nsp32_do_bus_reset(nsp32_hw_data *data)
2899{
2900 unsigned int base = data->BaseAddress;
2901 unsigned short intrdat;
2902 int i;
2903
2904 nsp32_dbg(NSP32_DEBUG_BUSRESET, "in");
2905
2906 /*
2907 * stop all transfer
2908 * clear TRANSFERCONTROL_BM_START
2909 * clear counter
2910 */
2911 nsp32_write2(base, TRANSFER_CONTROL, 0);
2912 nsp32_write4(base, BM_CNT, 0);
2913 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
2914
2915 /*
2916 * fall back to asynchronous transfer mode
2917 * initialize SDTR negotiation flag
2918 */
2919 for (i = 0; i < ARRAY_SIZE(data->target); i++) {
2920 nsp32_target *target = &data->target[i];
2921
2922 target->sync_flag = 0;
2923 nsp32_set_async(data, target);
2924 }
2925
2926 /*
2927 * reset SCSI bus
2928 */
2929 nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
2930 udelay(RESET_HOLD_TIME);
2931 nsp32_write1(base, SCSI_BUS_CONTROL, 0);
2932 for(i = 0; i < 5; i++) {
2933 intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
2934 nsp32_dbg(NSP32_DEBUG_BUSRESET, "irq:1: 0x%x", intrdat);
2935 }
2936
2937 data->CurrentSC = NULL;
2938}
2939
2940static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt)
2941{
2942 struct Scsi_Host *host = SCpnt->device->host;
2943 unsigned int base = SCpnt->device->host->io_port;
2944 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
2945
2946 nsp32_msg(KERN_INFO, "Host Reset");
2947 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
2948
2949 spin_lock_irq(SCpnt->device->host->host_lock);
2950
2951 nsp32hw_init(data);
2952 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
2953 nsp32_do_bus_reset(data);
2954 nsp32_write2(base, IRQ_CONTROL, 0);
2955
2956 spin_unlock_irq(SCpnt->device->host->host_lock);
2957 return SUCCESS; /* Host reset is succeeded at any time. */
2958}
2959
2960
2961/**************************************************************************
2962 * EEPROM handler
2963 */
2964
2965/*
2966 * getting EEPROM parameter
2967 */
2968static int nsp32_getprom_param(nsp32_hw_data *data)
2969{
2970 int vendor = data->pci_devid->vendor;
2971 int device = data->pci_devid->device;
2972 int ret, val, i;
2973
2974 /*
2975 * EEPROM checking.
2976 */
2977 ret = nsp32_prom_read(data, 0x7e);
2978 if (ret != 0x55) {
2979 nsp32_msg(KERN_INFO, "No EEPROM detected: 0x%x", ret);
2980 return FALSE;
2981 }
2982 ret = nsp32_prom_read(data, 0x7f);
2983 if (ret != 0xaa) {
2984 nsp32_msg(KERN_INFO, "Invalid number: 0x%x", ret);
2985 return FALSE;
2986 }
2987
2988 /*
2989 * check EEPROM type
2990 */
2991 if (vendor == PCI_VENDOR_ID_WORKBIT &&
2992 device == PCI_DEVICE_ID_WORKBIT_STANDARD) {
2993 ret = nsp32_getprom_c16(data);
2994 } else if (vendor == PCI_VENDOR_ID_WORKBIT &&
2995 device == PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC) {
2996 ret = nsp32_getprom_at24(data);
2997 } else if (vendor == PCI_VENDOR_ID_WORKBIT &&
2998 device == PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO ) {
2999 ret = nsp32_getprom_at24(data);
3000 } else {
3001 nsp32_msg(KERN_WARNING, "Unknown EEPROM");
3002 ret = FALSE;
3003 }
3004
3005 /* for debug : SPROM data full checking */
3006 for (i = 0; i <= 0x1f; i++) {
3007 val = nsp32_prom_read(data, i);
3008 nsp32_dbg(NSP32_DEBUG_EEPROM,
3009 "rom address 0x%x : 0x%x", i, val);
3010 }
3011
3012 return ret;
3013}
3014
3015
3016/*
3017 * AT24C01A (Logitec: LHA-600S), AT24C02 (Melco Buffalo: IFC-USLP) data map:
3018 *
3019 * ROMADDR
3020 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
3021 * Value 0x0: ASYNC, 0x0c: Ultra-20M, 0x19: Fast-10M
3022 * 0x07 : HBA Synchronous Transfer Period
3023 * Value 0: AutoSync, 1: Manual Setting
3024 * 0x08 - 0x0f : Not Used? (0x0)
3025 * 0x10 : Bus Termination
3026 * Value 0: Auto[ON], 1: ON, 2: OFF
3027 * 0x11 : Not Used? (0)
3028 * 0x12 : Bus Reset Delay Time (0x03)
3029 * 0x13 : Bootable CD Support
3030 * Value 0: Disable, 1: Enable
3031 * 0x14 : Device Scan
3032 * Bit 7 6 5 4 3 2 1 0
3033 * | <----------------->
3034 * | SCSI ID: Value 0: Skip, 1: YES
3035 * |-> Value 0: ALL scan, Value 1: Manual
3036 * 0x15 - 0x1b : Not Used? (0)
3037 * 0x1c : Constant? (0x01) (clock div?)
3038 * 0x1d - 0x7c : Not Used (0xff)
3039 * 0x7d : Not Used? (0xff)
3040 * 0x7e : Constant (0x55), Validity signature
3041 * 0x7f : Constant (0xaa), Validity signature
3042 */
3043static int nsp32_getprom_at24(nsp32_hw_data *data)
3044{
3045 int ret, i;
3046 int auto_sync;
3047 nsp32_target *target;
3048 int entry;
3049
3050 /*
3051 * Reset time which is designated by EEPROM.
3052 *
3053 * TODO: Not used yet.
3054 */
3055 data->resettime = nsp32_prom_read(data, 0x12);
3056
3057 /*
3058 * HBA Synchronous Transfer Period
3059 *
3060 * Note: auto_sync = 0: auto, 1: manual. Ninja SCSI HBA spec says
3061 * that if auto_sync is 0 (auto), and connected SCSI devices are
3062 * same or lower than 3, then transfer speed is set as ULTRA-20M.
3063 * On the contrary if connected SCSI devices are same or higher
3064 * than 4, then transfer speed is set as FAST-10M.
3065 *
3066 * I break this rule. The number of connected SCSI devices are
3067 * only ignored. If auto_sync is 0 (auto), then transfer speed is
3068 * forced as ULTRA-20M.
3069 */
3070 ret = nsp32_prom_read(data, 0x07);
3071 switch (ret) {
3072 case 0:
3073 auto_sync = TRUE;
3074 break;
3075 case 1:
3076 auto_sync = FALSE;
3077 break;
3078 default:
3079 nsp32_msg(KERN_WARNING,
3080 "Unsupported Auto Sync mode. Fall back to manual mode.");
3081 auto_sync = TRUE;
3082 }
3083
3084 if (trans_mode == ULTRA20M_MODE) {
3085 auto_sync = TRUE;
3086 }
3087
3088 /*
3089 * each device Synchronous Transfer Period
3090 */
3091 for (i = 0; i < NSP32_HOST_SCSIID; i++) {
3092 target = &data->target[i];
3093 if (auto_sync == TRUE) {
3094 target->limit_entry = 0; /* set as ULTRA20M */
3095 } else {
3096 ret = nsp32_prom_read(data, i);
3097 entry = nsp32_search_period_entry(data, target, ret);
3098 if (entry < 0) {
3099 /* search failed... set maximum speed */
3100 entry = 0;
3101 }
3102 target->limit_entry = entry;
3103 }
3104 }
3105
3106 return TRUE;
3107}
3108
3109
3110/*
3111 * C16 110 (I-O Data: SC-NBD) data map:
3112 *
3113 * ROMADDR
3114 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
3115 * Value 0x0: 20MB/S, 0x1: 10MB/S, 0x2: 5MB/S, 0x3: ASYNC
3116 * 0x07 : 0 (HBA Synchronous Transfer Period: Auto Sync)
3117 * 0x08 - 0x0f : Not Used? (0x0)
3118 * 0x10 : Transfer Mode
3119 * Value 0: PIO, 1: Busmater
3120 * 0x11 : Bus Reset Delay Time (0x00-0x20)
3121 * 0x12 : Bus Termination
3122 * Value 0: Disable, 1: Enable
3123 * 0x13 - 0x19 : Disconnection
3124 * Value 0: Disable, 1: Enable
3125 * 0x1a - 0x7c : Not Used? (0)
3126 * 0x7d : Not Used? (0xf8)
3127 * 0x7e : Constant (0x55), Validity signature
3128 * 0x7f : Constant (0xaa), Validity signature
3129 */
3130static int nsp32_getprom_c16(nsp32_hw_data *data)
3131{
3132 int ret, i;
3133 nsp32_target *target;
3134 int entry, val;
3135
3136 /*
3137 * Reset time which is designated by EEPROM.
3138 *
3139 * TODO: Not used yet.
3140 */
3141 data->resettime = nsp32_prom_read(data, 0x11);
3142
3143 /*
3144 * each device Synchronous Transfer Period
3145 */
3146 for (i = 0; i < NSP32_HOST_SCSIID; i++) {
3147 target = &data->target[i];
3148 ret = nsp32_prom_read(data, i);
3149 switch (ret) {
3150 case 0: /* 20MB/s */
3151 val = 0x0c;
3152 break;
3153 case 1: /* 10MB/s */
3154 val = 0x19;
3155 break;
3156 case 2: /* 5MB/s */
3157 val = 0x32;
3158 break;
3159 case 3: /* ASYNC */
3160 val = 0x00;
3161 break;
3162 default: /* default 20MB/s */
3163 val = 0x0c;
3164 break;
3165 }
3166 entry = nsp32_search_period_entry(data, target, val);
3167 if (entry < 0 || trans_mode == ULTRA20M_MODE) {
3168 /* search failed... set maximum speed */
3169 entry = 0;
3170 }
3171 target->limit_entry = entry;
3172 }
3173
3174 return TRUE;
3175}
3176
3177
3178/*
3179 * Atmel AT24C01A (drived in 5V) serial EEPROM routines
3180 */
3181static int nsp32_prom_read(nsp32_hw_data *data, int romaddr)
3182{
3183 int i, val;
3184
3185 /* start condition */
3186 nsp32_prom_start(data);
3187
3188 /* device address */
3189 nsp32_prom_write_bit(data, 1); /* 1 */
3190 nsp32_prom_write_bit(data, 0); /* 0 */
3191 nsp32_prom_write_bit(data, 1); /* 1 */
3192 nsp32_prom_write_bit(data, 0); /* 0 */
3193 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */
3194 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */
3195 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */
3196
3197 /* R/W: W for dummy write */
3198 nsp32_prom_write_bit(data, 0);
3199
3200 /* ack */
3201 nsp32_prom_write_bit(data, 0);
3202
3203 /* word address */
3204 for (i = 7; i >= 0; i--) {
3205 nsp32_prom_write_bit(data, ((romaddr >> i) & 1));
3206 }
3207
3208 /* ack */
3209 nsp32_prom_write_bit(data, 0);
3210
3211 /* start condition */
3212 nsp32_prom_start(data);
3213
3214 /* device address */
3215 nsp32_prom_write_bit(data, 1); /* 1 */
3216 nsp32_prom_write_bit(data, 0); /* 0 */
3217 nsp32_prom_write_bit(data, 1); /* 1 */
3218 nsp32_prom_write_bit(data, 0); /* 0 */
3219 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */
3220 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */
3221 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */
3222
3223 /* R/W: R */
3224 nsp32_prom_write_bit(data, 1);
3225
3226 /* ack */
3227 nsp32_prom_write_bit(data, 0);
3228
3229 /* data... */
3230 val = 0;
3231 for (i = 7; i >= 0; i--) {
3232 val += (nsp32_prom_read_bit(data) << i);
3233 }
3234
3235 /* no ack */
3236 nsp32_prom_write_bit(data, 1);
3237
3238 /* stop condition */
3239 nsp32_prom_stop(data);
3240
3241 return val;
3242}
3243
3244static void nsp32_prom_set(nsp32_hw_data *data, int bit, int val)
3245{
3246 int base = data->BaseAddress;
3247 int tmp;
3248
3249 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL);
3250
3251 if (val == 0) {
3252 tmp &= ~bit;
3253 } else {
3254 tmp |= bit;
3255 }
3256
3257 nsp32_index_write1(base, SERIAL_ROM_CTL, tmp);
3258
3259 udelay(10);
3260}
3261
3262static int nsp32_prom_get(nsp32_hw_data *data, int bit)
3263{
3264 int base = data->BaseAddress;
3265 int tmp, ret;
3266
3267 if (bit != SDA) {
3268 nsp32_msg(KERN_ERR, "return value is not appropriate");
3269 return 0;
3270 }
3271
3272
3273 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL) & bit;
3274
3275 if (tmp == 0) {
3276 ret = 0;
3277 } else {
3278 ret = 1;
3279 }
3280
3281 udelay(10);
3282
3283 return ret;
3284}
3285
3286static void nsp32_prom_start (nsp32_hw_data *data)
3287{
3288 /* start condition */
3289 nsp32_prom_set(data, SCL, 1);
3290 nsp32_prom_set(data, SDA, 1);
3291 nsp32_prom_set(data, ENA, 1); /* output mode */
3292 nsp32_prom_set(data, SDA, 0); /* keeping SCL=1 and transiting
3293 * SDA 1->0 is start condition */
3294 nsp32_prom_set(data, SCL, 0);
3295}
3296
3297static void nsp32_prom_stop (nsp32_hw_data *data)
3298{
3299 /* stop condition */
3300 nsp32_prom_set(data, SCL, 1);
3301 nsp32_prom_set(data, SDA, 0);
3302 nsp32_prom_set(data, ENA, 1); /* output mode */
3303 nsp32_prom_set(data, SDA, 1);
3304 nsp32_prom_set(data, SCL, 0);
3305}
3306
3307static void nsp32_prom_write_bit(nsp32_hw_data *data, int val)
3308{
3309 /* write */
3310 nsp32_prom_set(data, SDA, val);
3311 nsp32_prom_set(data, SCL, 1 );
3312 nsp32_prom_set(data, SCL, 0 );
3313}
3314
3315static int nsp32_prom_read_bit(nsp32_hw_data *data)
3316{
3317 int val;
3318
3319 /* read */
3320 nsp32_prom_set(data, ENA, 0); /* input mode */
3321 nsp32_prom_set(data, SCL, 1);
3322
3323 val = nsp32_prom_get(data, SDA);
3324
3325 nsp32_prom_set(data, SCL, 0);
3326 nsp32_prom_set(data, ENA, 1); /* output mode */
3327
3328 return val;
3329}
3330
3331
3332/**************************************************************************
3333 * Power Management
3334 */
3335#ifdef CONFIG_PM
3336
3337/* Device suspended */
3338static int nsp32_suspend(struct pci_dev *pdev, pm_message_t state)
3339{
3340 struct Scsi_Host *host = pci_get_drvdata(pdev);
3341
3342 nsp32_msg(KERN_INFO, "pci-suspend: pdev=0x%p, state=%ld, slot=%s, host=0x%p", pdev, state, pci_name(pdev), host);
3343
3344 pci_save_state (pdev);
3345 pci_disable_device (pdev);
3346 pci_set_power_state(pdev, pci_choose_state(pdev, state));
3347
3348 return 0;
3349}
3350
3351/* Device woken up */
3352static int nsp32_resume(struct pci_dev *pdev)
3353{
3354 struct Scsi_Host *host = pci_get_drvdata(pdev);
3355 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
3356 unsigned short reg;
3357
3358 nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p", pdev, pci_name(pdev), host);
3359
3360 pci_set_power_state(pdev, PCI_D0);
3361 pci_enable_wake (pdev, PCI_D0, 0);
3362 pci_restore_state (pdev);
3363
3364 reg = nsp32_read2(data->BaseAddress, INDEX_REG);
3365
3366 nsp32_msg(KERN_INFO, "io=0x%x reg=0x%x", data->BaseAddress, reg);
3367
3368 if (reg == 0xffff) {
3369 nsp32_msg(KERN_INFO, "missing device. abort resume.");
3370 return 0;
3371 }
3372
3373 nsp32hw_init (data);
3374 nsp32_do_bus_reset(data);
3375
3376 nsp32_msg(KERN_INFO, "resume success");
3377
3378 return 0;
3379}
3380
3381#endif
3382
3383/************************************************************************
3384 * PCI/Cardbus probe/remove routine
3385 */
3386static int __devinit nsp32_probe(struct pci_dev *pdev, const struct pci_device_id *id)
3387{
3388 int ret;
3389 nsp32_hw_data *data = &nsp32_data_base;
3390
3391 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
3392
3393 ret = pci_enable_device(pdev);
3394 if (ret) {
3395 nsp32_msg(KERN_ERR, "failed to enable pci device");
3396 return ret;
3397 }
3398
3399 data->Pci = pdev;
3400 data->pci_devid = id;
3401 data->IrqNumber = pdev->irq;
3402 data->BaseAddress = pci_resource_start(pdev, 0);
3403 data->NumAddress = pci_resource_len (pdev, 0);
3404 data->MmioAddress = pci_ioremap_bar(pdev, 1);
3405 data->MmioLength = pci_resource_len (pdev, 1);
3406
3407 pci_set_master(pdev);
3408
3409 ret = nsp32_detect(pdev);
3410
3411 nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s",
3412 pdev->irq,
3413 data->MmioAddress, data->MmioLength,
3414 pci_name(pdev),
3415 nsp32_model[id->driver_data]);
3416
3417 nsp32_dbg(NSP32_DEBUG_REGISTER, "exit %d", ret);
3418
3419 return ret;
3420}
3421
3422static void __devexit nsp32_remove(struct pci_dev *pdev)
3423{
3424 struct Scsi_Host *host = pci_get_drvdata(pdev);
3425
3426 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
3427
3428 scsi_remove_host(host);
3429
3430 nsp32_release(host);
3431
3432 scsi_host_put(host);
3433}
3434
3435static struct pci_driver nsp32_driver = {
3436 .name = "nsp32",
3437 .id_table = nsp32_pci_table,
3438 .probe = nsp32_probe,
3439 .remove = __devexit_p(nsp32_remove),
3440#ifdef CONFIG_PM
3441 .suspend = nsp32_suspend,
3442 .resume = nsp32_resume,
3443#endif
3444};
3445
3446/*********************************************************************
3447 * Moule entry point
3448 */
3449static int __init init_nsp32(void) {
3450 nsp32_msg(KERN_INFO, "loading...");
3451 return pci_register_driver(&nsp32_driver);
3452}
3453
3454static void __exit exit_nsp32(void) {
3455 nsp32_msg(KERN_INFO, "unloading...");
3456 pci_unregister_driver(&nsp32_driver);
3457}
3458
3459module_init(init_nsp32);
3460module_exit(exit_nsp32);
3461
3462/* end */
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * NinjaSCSI-32Bi Cardbus, NinjaSCSI-32UDE PCI/CardBus SCSI driver
4 * Copyright (C) 2001, 2002, 2003
5 * YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
6 * GOTO Masanori <gotom@debian.or.jp>, <gotom@debian.org>
7 *
8 * Revision History:
9 * 1.0: Initial Release.
10 * 1.1: Add /proc SDTR status.
11 * Remove obsolete error handler nsp32_reset.
12 * Some clean up.
13 * 1.2: PowerPC (big endian) support.
14 */
15
16#include <linux/module.h>
17#include <linux/init.h>
18#include <linux/kernel.h>
19#include <linux/string.h>
20#include <linux/timer.h>
21#include <linux/ioport.h>
22#include <linux/major.h>
23#include <linux/blkdev.h>
24#include <linux/interrupt.h>
25#include <linux/pci.h>
26#include <linux/delay.h>
27#include <linux/ctype.h>
28#include <linux/dma-mapping.h>
29
30#include <asm/dma.h>
31#include <asm/io.h>
32
33#include <scsi/scsi.h>
34#include <scsi/scsi_cmnd.h>
35#include <scsi/scsi_device.h>
36#include <scsi/scsi_host.h>
37#include <scsi/scsi_ioctl.h>
38
39#include "nsp32.h"
40
41
42/***********************************************************************
43 * Module parameters
44 */
45static int trans_mode = 0; /* default: BIOS */
46module_param (trans_mode, int, 0);
47MODULE_PARM_DESC(trans_mode, "transfer mode (0: BIOS(default) 1: Async 2: Ultra20M");
48#define ASYNC_MODE 1
49#define ULTRA20M_MODE 2
50
51static bool auto_param = 0; /* default: ON */
52module_param (auto_param, bool, 0);
53MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)");
54
55static bool disc_priv = 1; /* default: OFF */
56module_param (disc_priv, bool, 0);
57MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))");
58
59MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>, GOTO Masanori <gotom@debian.or.jp>");
60MODULE_DESCRIPTION("Workbit NinjaSCSI-32Bi/UDE CardBus/PCI SCSI host bus adapter module");
61MODULE_LICENSE("GPL");
62
63static const char *nsp32_release_version = "1.2";
64
65
66/****************************************************************************
67 * Supported hardware
68 */
69static struct pci_device_id nsp32_pci_table[] = {
70 {
71 .vendor = PCI_VENDOR_ID_IODATA,
72 .device = PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II,
73 .subvendor = PCI_ANY_ID,
74 .subdevice = PCI_ANY_ID,
75 .driver_data = MODEL_IODATA,
76 },
77 {
78 .vendor = PCI_VENDOR_ID_WORKBIT,
79 .device = PCI_DEVICE_ID_NINJASCSI_32BI_KME,
80 .subvendor = PCI_ANY_ID,
81 .subdevice = PCI_ANY_ID,
82 .driver_data = MODEL_KME,
83 },
84 {
85 .vendor = PCI_VENDOR_ID_WORKBIT,
86 .device = PCI_DEVICE_ID_NINJASCSI_32BI_WBT,
87 .subvendor = PCI_ANY_ID,
88 .subdevice = PCI_ANY_ID,
89 .driver_data = MODEL_WORKBIT,
90 },
91 {
92 .vendor = PCI_VENDOR_ID_WORKBIT,
93 .device = PCI_DEVICE_ID_WORKBIT_STANDARD,
94 .subvendor = PCI_ANY_ID,
95 .subdevice = PCI_ANY_ID,
96 .driver_data = MODEL_PCI_WORKBIT,
97 },
98 {
99 .vendor = PCI_VENDOR_ID_WORKBIT,
100 .device = PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC,
101 .subvendor = PCI_ANY_ID,
102 .subdevice = PCI_ANY_ID,
103 .driver_data = MODEL_LOGITEC,
104 },
105 {
106 .vendor = PCI_VENDOR_ID_WORKBIT,
107 .device = PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC,
108 .subvendor = PCI_ANY_ID,
109 .subdevice = PCI_ANY_ID,
110 .driver_data = MODEL_PCI_LOGITEC,
111 },
112 {
113 .vendor = PCI_VENDOR_ID_WORKBIT,
114 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO,
115 .subvendor = PCI_ANY_ID,
116 .subdevice = PCI_ANY_ID,
117 .driver_data = MODEL_PCI_MELCO,
118 },
119 {
120 .vendor = PCI_VENDOR_ID_WORKBIT,
121 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II,
122 .subvendor = PCI_ANY_ID,
123 .subdevice = PCI_ANY_ID,
124 .driver_data = MODEL_PCI_MELCO,
125 },
126 {0,0,},
127};
128MODULE_DEVICE_TABLE(pci, nsp32_pci_table);
129
130static nsp32_hw_data nsp32_data_base; /* probe <-> detect glue */
131
132
133/*
134 * Period/AckWidth speed conversion table
135 *
136 * Note: This period/ackwidth speed table must be in descending order.
137 */
138static nsp32_sync_table nsp32_sync_table_40M[] = {
139 /* {PNo, AW, SP, EP, SREQ smpl} Speed(MB/s) Period AckWidth */
140 {0x1, 0, 0x0c, 0x0c, SMPL_40M}, /* 20.0 : 50ns, 25ns */
141 {0x2, 0, 0x0d, 0x18, SMPL_40M}, /* 13.3 : 75ns, 25ns */
142 {0x3, 1, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */
143 {0x4, 1, 0x1a, 0x1f, SMPL_20M}, /* 8.0 : 125ns, 50ns */
144 {0x5, 2, 0x20, 0x25, SMPL_20M}, /* 6.7 : 150ns, 75ns */
145 {0x6, 2, 0x26, 0x31, SMPL_20M}, /* 5.7 : 175ns, 75ns */
146 {0x7, 3, 0x32, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */
147 {0x8, 3, 0x33, 0x38, SMPL_10M}, /* 4.4 : 225ns, 100ns */
148 {0x9, 3, 0x39, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */
149};
150
151static nsp32_sync_table nsp32_sync_table_20M[] = {
152 {0x1, 0, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */
153 {0x2, 0, 0x1a, 0x25, SMPL_20M}, /* 6.7 : 150ns, 50ns */
154 {0x3, 1, 0x26, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */
155 {0x4, 1, 0x33, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */
156 {0x5, 2, 0x3f, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 150ns */
157 {0x6, 2, 0x4c, 0x57, SMPL_10M}, /* 2.8 : 350ns, 150ns */
158 {0x7, 3, 0x58, 0x64, SMPL_10M}, /* 2.5 : 400ns, 200ns */
159 {0x8, 3, 0x65, 0x70, SMPL_10M}, /* 2.2 : 450ns, 200ns */
160 {0x9, 3, 0x71, 0x7d, SMPL_10M}, /* 2.0 : 500ns, 200ns */
161};
162
163static nsp32_sync_table nsp32_sync_table_pci[] = {
164 {0x1, 0, 0x0c, 0x0f, SMPL_40M}, /* 16.6 : 60ns, 30ns */
165 {0x2, 0, 0x10, 0x16, SMPL_40M}, /* 11.1 : 90ns, 30ns */
166 {0x3, 1, 0x17, 0x1e, SMPL_20M}, /* 8.3 : 120ns, 60ns */
167 {0x4, 1, 0x1f, 0x25, SMPL_20M}, /* 6.7 : 150ns, 60ns */
168 {0x5, 2, 0x26, 0x2d, SMPL_20M}, /* 5.6 : 180ns, 90ns */
169 {0x6, 2, 0x2e, 0x34, SMPL_10M}, /* 4.8 : 210ns, 90ns */
170 {0x7, 3, 0x35, 0x3c, SMPL_10M}, /* 4.2 : 240ns, 120ns */
171 {0x8, 3, 0x3d, 0x43, SMPL_10M}, /* 3.7 : 270ns, 120ns */
172 {0x9, 3, 0x44, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 120ns */
173};
174
175/*
176 * function declaration
177 */
178/* module entry point */
179static int nsp32_probe (struct pci_dev *, const struct pci_device_id *);
180static void nsp32_remove(struct pci_dev *);
181static int __init init_nsp32 (void);
182static void __exit exit_nsp32 (void);
183
184/* struct struct scsi_host_template */
185static int nsp32_show_info (struct seq_file *, struct Scsi_Host *);
186
187static int nsp32_detect (struct pci_dev *pdev);
188static int nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
189static const char *nsp32_info (struct Scsi_Host *);
190static int nsp32_release (struct Scsi_Host *);
191
192/* SCSI error handler */
193static int nsp32_eh_abort (struct scsi_cmnd *);
194static int nsp32_eh_host_reset(struct scsi_cmnd *);
195
196/* generate SCSI message */
197static void nsp32_build_identify(struct scsi_cmnd *);
198static void nsp32_build_nop (struct scsi_cmnd *);
199static void nsp32_build_reject (struct scsi_cmnd *);
200static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char, unsigned char);
201
202/* SCSI message handler */
203static int nsp32_busfree_occur(struct scsi_cmnd *, unsigned short);
204static void nsp32_msgout_occur (struct scsi_cmnd *);
205static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long, unsigned short);
206
207static int nsp32_setup_sg_table (struct scsi_cmnd *);
208static int nsp32_selection_autopara(struct scsi_cmnd *);
209static int nsp32_selection_autoscsi(struct scsi_cmnd *);
210static void nsp32_scsi_done (struct scsi_cmnd *);
211static int nsp32_arbitration (struct scsi_cmnd *, unsigned int);
212static int nsp32_reselection (struct scsi_cmnd *, unsigned char);
213static void nsp32_adjust_busfree (struct scsi_cmnd *, unsigned int);
214static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short);
215
216/* SCSI SDTR */
217static void nsp32_analyze_sdtr (struct scsi_cmnd *);
218static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *, unsigned char);
219static void nsp32_set_async (nsp32_hw_data *, nsp32_target *);
220static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *, unsigned char *, unsigned char *);
221static void nsp32_set_sync_entry (nsp32_hw_data *, nsp32_target *, int, unsigned char);
222
223/* SCSI bus status handler */
224static void nsp32_wait_req (nsp32_hw_data *, int);
225static void nsp32_wait_sack (nsp32_hw_data *, int);
226static void nsp32_sack_assert (nsp32_hw_data *);
227static void nsp32_sack_negate (nsp32_hw_data *);
228static void nsp32_do_bus_reset(nsp32_hw_data *);
229
230/* hardware interrupt handler */
231static irqreturn_t do_nsp32_isr(int, void *);
232
233/* initialize hardware */
234static int nsp32hw_init(nsp32_hw_data *);
235
236/* EEPROM handler */
237static int nsp32_getprom_param (nsp32_hw_data *);
238static int nsp32_getprom_at24 (nsp32_hw_data *);
239static int nsp32_getprom_c16 (nsp32_hw_data *);
240static void nsp32_prom_start (nsp32_hw_data *);
241static void nsp32_prom_stop (nsp32_hw_data *);
242static int nsp32_prom_read (nsp32_hw_data *, int);
243static int nsp32_prom_read_bit (nsp32_hw_data *);
244static void nsp32_prom_write_bit(nsp32_hw_data *, int);
245static void nsp32_prom_set (nsp32_hw_data *, int, int);
246static int nsp32_prom_get (nsp32_hw_data *, int);
247
248/* debug/warning/info message */
249static void nsp32_message (const char *, int, char *, char *, ...);
250#ifdef NSP32_DEBUG
251static void nsp32_dmessage(const char *, int, int, char *, ...);
252#endif
253
254/*
255 * max_sectors is currently limited up to 128.
256 */
257static struct scsi_host_template nsp32_template = {
258 .proc_name = "nsp32",
259 .name = "Workbit NinjaSCSI-32Bi/UDE",
260 .show_info = nsp32_show_info,
261 .info = nsp32_info,
262 .queuecommand = nsp32_queuecommand,
263 .can_queue = 1,
264 .sg_tablesize = NSP32_SG_SIZE,
265 .max_sectors = 128,
266 .this_id = NSP32_HOST_SCSIID,
267 .dma_boundary = PAGE_SIZE - 1,
268 .eh_abort_handler = nsp32_eh_abort,
269 .eh_host_reset_handler = nsp32_eh_host_reset,
270/* .highmem_io = 1, */
271};
272
273#include "nsp32_io.h"
274
275/***********************************************************************
276 * debug, error print
277 */
278#ifndef NSP32_DEBUG
279# define NSP32_DEBUG_MASK 0x000000
280# define nsp32_msg(type, args...) nsp32_message ("", 0, (type), args)
281# define nsp32_dbg(mask, args...) /* */
282#else
283# define NSP32_DEBUG_MASK 0xffffff
284# define nsp32_msg(type, args...) \
285 nsp32_message (__func__, __LINE__, (type), args)
286# define nsp32_dbg(mask, args...) \
287 nsp32_dmessage(__func__, __LINE__, (mask), args)
288#endif
289
290#define NSP32_DEBUG_QUEUECOMMAND BIT(0)
291#define NSP32_DEBUG_REGISTER BIT(1)
292#define NSP32_DEBUG_AUTOSCSI BIT(2)
293#define NSP32_DEBUG_INTR BIT(3)
294#define NSP32_DEBUG_SGLIST BIT(4)
295#define NSP32_DEBUG_BUSFREE BIT(5)
296#define NSP32_DEBUG_CDB_CONTENTS BIT(6)
297#define NSP32_DEBUG_RESELECTION BIT(7)
298#define NSP32_DEBUG_MSGINOCCUR BIT(8)
299#define NSP32_DEBUG_EEPROM BIT(9)
300#define NSP32_DEBUG_MSGOUTOCCUR BIT(10)
301#define NSP32_DEBUG_BUSRESET BIT(11)
302#define NSP32_DEBUG_RESTART BIT(12)
303#define NSP32_DEBUG_SYNC BIT(13)
304#define NSP32_DEBUG_WAIT BIT(14)
305#define NSP32_DEBUG_TARGETFLAG BIT(15)
306#define NSP32_DEBUG_PROC BIT(16)
307#define NSP32_DEBUG_INIT BIT(17)
308#define NSP32_SPECIAL_PRINT_REGISTER BIT(20)
309
310#define NSP32_DEBUG_BUF_LEN 100
311
312static void nsp32_message(const char *func, int line, char *type, char *fmt, ...)
313{
314 va_list args;
315 char buf[NSP32_DEBUG_BUF_LEN];
316
317 va_start(args, fmt);
318 vsnprintf(buf, sizeof(buf), fmt, args);
319 va_end(args);
320
321#ifndef NSP32_DEBUG
322 printk("%snsp32: %s\n", type, buf);
323#else
324 printk("%snsp32: %s (%d): %s\n", type, func, line, buf);
325#endif
326}
327
328#ifdef NSP32_DEBUG
329static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...)
330{
331 va_list args;
332 char buf[NSP32_DEBUG_BUF_LEN];
333
334 va_start(args, fmt);
335 vsnprintf(buf, sizeof(buf), fmt, args);
336 va_end(args);
337
338 if (mask & NSP32_DEBUG_MASK) {
339 printk("nsp32-debug: 0x%x %s (%d): %s\n", mask, func, line, buf);
340 }
341}
342#endif
343
344#ifdef NSP32_DEBUG
345# include "nsp32_debug.c"
346#else
347# define show_command(arg) /* */
348# define show_busphase(arg) /* */
349# define show_autophase(arg) /* */
350#endif
351
352/*
353 * IDENTIFY Message
354 */
355static void nsp32_build_identify(struct scsi_cmnd *SCpnt)
356{
357 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
358 int pos = data->msgout_len;
359 int mode = FALSE;
360
361 /* XXX: Auto DiscPriv detection is progressing... */
362 if (disc_priv == 0) {
363 /* mode = TRUE; */
364 }
365
366 data->msgoutbuf[pos] = IDENTIFY(mode, SCpnt->device->lun); pos++;
367
368 data->msgout_len = pos;
369}
370
371/*
372 * SDTR Message Routine
373 */
374static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt,
375 unsigned char period,
376 unsigned char offset)
377{
378 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
379 int pos = data->msgout_len;
380
381 data->msgoutbuf[pos] = EXTENDED_MESSAGE; pos++;
382 data->msgoutbuf[pos] = EXTENDED_SDTR_LEN; pos++;
383 data->msgoutbuf[pos] = EXTENDED_SDTR; pos++;
384 data->msgoutbuf[pos] = period; pos++;
385 data->msgoutbuf[pos] = offset; pos++;
386
387 data->msgout_len = pos;
388}
389
390/*
391 * No Operation Message
392 */
393static void nsp32_build_nop(struct scsi_cmnd *SCpnt)
394{
395 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
396 int pos = data->msgout_len;
397
398 if (pos != 0) {
399 nsp32_msg(KERN_WARNING,
400 "Some messages are already contained!");
401 return;
402 }
403
404 data->msgoutbuf[pos] = NOP; pos++;
405 data->msgout_len = pos;
406}
407
408/*
409 * Reject Message
410 */
411static void nsp32_build_reject(struct scsi_cmnd *SCpnt)
412{
413 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
414 int pos = data->msgout_len;
415
416 data->msgoutbuf[pos] = MESSAGE_REJECT; pos++;
417 data->msgout_len = pos;
418}
419
420/*
421 * timer
422 */
423#if 0
424static void nsp32_start_timer(struct scsi_cmnd *SCpnt, int time)
425{
426 unsigned int base = SCpnt->host->io_port;
427
428 nsp32_dbg(NSP32_DEBUG_INTR, "timer=%d", time);
429
430 if (time & (~TIMER_CNT_MASK)) {
431 nsp32_dbg(NSP32_DEBUG_INTR, "timer set overflow");
432 }
433
434 nsp32_write2(base, TIMER_SET, time & TIMER_CNT_MASK);
435}
436#endif
437
438
439/*
440 * set SCSI command and other parameter to asic, and start selection phase
441 */
442static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
443{
444 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
445 unsigned int base = SCpnt->device->host->io_port;
446 unsigned int host_id = SCpnt->device->host->this_id;
447 unsigned char target = scmd_id(SCpnt);
448 nsp32_autoparam *param = data->autoparam;
449 unsigned char phase;
450 int i, ret;
451 unsigned int msgout;
452 u16_le s;
453
454 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
455
456 /*
457 * check bus free
458 */
459 phase = nsp32_read1(base, SCSI_BUS_MONITOR);
460 if (phase != BUSMON_BUS_FREE) {
461 nsp32_msg(KERN_WARNING, "bus busy");
462 show_busphase(phase & BUSMON_PHASE_MASK);
463 SCpnt->result = DID_BUS_BUSY << 16;
464 return FALSE;
465 }
466
467 /*
468 * message out
469 *
470 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout.
471 * over 3 messages needs another routine.
472 */
473 if (data->msgout_len == 0) {
474 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!");
475 SCpnt->result = DID_ERROR << 16;
476 return FALSE;
477 } else if (data->msgout_len > 0 && data->msgout_len <= 3) {
478 msgout = 0;
479 for (i = 0; i < data->msgout_len; i++) {
480 /*
481 * the sending order of the message is:
482 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2
483 * MCNT 2: MSG#1 -> MSG#2
484 * MCNT 1: MSG#2
485 */
486 msgout >>= 8;
487 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
488 }
489 msgout |= MV_VALID; /* MV valid */
490 msgout |= (unsigned int)data->msgout_len; /* len */
491 } else {
492 /* data->msgout_len > 3 */
493 msgout = 0;
494 }
495
496 // nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", nsp32_read2(base, SEL_TIME_OUT));
497 // nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
498
499 /*
500 * setup asic parameter
501 */
502 memset(param, 0, sizeof(nsp32_autoparam));
503
504 /* cdb */
505 for (i = 0; i < SCpnt->cmd_len; i++) {
506 param->cdb[4 * i] = SCpnt->cmnd[i];
507 }
508
509 /* outgoing messages */
510 param->msgout = cpu_to_le32(msgout);
511
512 /* syncreg, ackwidth, target id, SREQ sampling rate */
513 param->syncreg = data->cur_target->syncreg;
514 param->ackwidth = data->cur_target->ackwidth;
515 param->target_id = BIT(host_id) | BIT(target);
516 param->sample_reg = data->cur_target->sample_reg;
517
518 // nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "sample rate=0x%x\n", data->cur_target->sample_reg);
519
520 /* command control */
521 param->command_control = cpu_to_le16(CLEAR_CDB_FIFO_POINTER |
522 AUTOSCSI_START |
523 AUTO_MSGIN_00_OR_04 |
524 AUTO_MSGIN_02 |
525 AUTO_ATN );
526
527
528 /* transfer control */
529 s = 0;
530 switch (data->trans_method) {
531 case NSP32_TRANSFER_BUSMASTER:
532 s |= BM_START;
533 break;
534 case NSP32_TRANSFER_MMIO:
535 s |= CB_MMIO_MODE;
536 break;
537 case NSP32_TRANSFER_PIO:
538 s |= CB_IO_MODE;
539 break;
540 default:
541 nsp32_msg(KERN_ERR, "unknown trans_method");
542 break;
543 }
544 /*
545 * OR-ed BLIEND_MODE, FIFO intr is decreased, instead of PCI bus waits.
546 * For bus master transfer, it's taken off.
547 */
548 s |= (TRANSFER_GO | ALL_COUNTER_CLR);
549 param->transfer_control = cpu_to_le16(s);
550
551 /* sg table addr */
552 param->sgt_pointer = cpu_to_le32(data->cur_lunt->sglun_paddr);
553
554 /*
555 * transfer parameter to ASIC
556 */
557 nsp32_write4(base, SGT_ADR, data->auto_paddr);
558 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER |
559 AUTO_PARAMETER );
560
561 /*
562 * Check arbitration
563 */
564 ret = nsp32_arbitration(SCpnt, base);
565
566 return ret;
567}
568
569
570/*
571 * Selection with AUTO SCSI (without AUTO PARAMETER)
572 */
573static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
574{
575 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
576 unsigned int base = SCpnt->device->host->io_port;
577 unsigned int host_id = SCpnt->device->host->this_id;
578 unsigned char target = scmd_id(SCpnt);
579 unsigned char phase;
580 int status;
581 unsigned short command = 0;
582 unsigned int msgout = 0;
583 unsigned short execph;
584 int i;
585
586 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
587
588 /*
589 * IRQ disable
590 */
591 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
592
593 /*
594 * check bus line
595 */
596 phase = nsp32_read1(base, SCSI_BUS_MONITOR);
597 if ((phase & BUSMON_BSY) || (phase & BUSMON_SEL)) {
598 nsp32_msg(KERN_WARNING, "bus busy");
599 SCpnt->result = DID_BUS_BUSY << 16;
600 status = 1;
601 goto out;
602 }
603
604 /*
605 * clear execph
606 */
607 execph = nsp32_read2(base, SCSI_EXECUTE_PHASE);
608
609 /*
610 * clear FIFO counter to set CDBs
611 */
612 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER);
613
614 /*
615 * set CDB0 - CDB15
616 */
617 for (i = 0; i < SCpnt->cmd_len; i++) {
618 nsp32_write1(base, COMMAND_DATA, SCpnt->cmnd[i]);
619 }
620 nsp32_dbg(NSP32_DEBUG_CDB_CONTENTS, "CDB[0]=[0x%x]", SCpnt->cmnd[0]);
621
622 /*
623 * set SCSIOUT LATCH(initiator)/TARGET(target) (OR-ed) ID
624 */
625 nsp32_write1(base, SCSI_OUT_LATCH_TARGET_ID, BIT(host_id) | BIT(target));
626
627 /*
628 * set SCSI MSGOUT REG
629 *
630 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout.
631 * over 3 messages needs another routine.
632 */
633 if (data->msgout_len == 0) {
634 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!");
635 SCpnt->result = DID_ERROR << 16;
636 status = 1;
637 goto out;
638 } else if (data->msgout_len > 0 && data->msgout_len <= 3) {
639 msgout = 0;
640 for (i = 0; i < data->msgout_len; i++) {
641 /*
642 * the sending order of the message is:
643 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2
644 * MCNT 2: MSG#1 -> MSG#2
645 * MCNT 1: MSG#2
646 */
647 msgout >>= 8;
648 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
649 }
650 msgout |= MV_VALID; /* MV valid */
651 msgout |= (unsigned int)data->msgout_len; /* len */
652 nsp32_write4(base, SCSI_MSG_OUT, msgout);
653 } else {
654 /* data->msgout_len > 3 */
655 nsp32_write4(base, SCSI_MSG_OUT, 0);
656 }
657
658 /*
659 * set selection timeout(= 250ms)
660 */
661 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
662
663 /*
664 * set SREQ hazard killer sampling rate
665 *
666 * TODO: sample_rate (BASE+0F) is 0 when internal clock = 40MHz.
667 * check other internal clock!
668 */
669 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg);
670
671 /*
672 * clear Arbit
673 */
674 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR);
675
676 /*
677 * set SYNCREG
678 * Don't set BM_START_ADR before setting this register.
679 */
680 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg);
681
682 /*
683 * set ACKWIDTH
684 */
685 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth);
686
687 nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
688 "syncreg=0x%x, ackwidth=0x%x, sgtpaddr=0x%x, id=0x%x",
689 nsp32_read1(base, SYNC_REG), nsp32_read1(base, ACK_WIDTH),
690 nsp32_read4(base, SGT_ADR), nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID));
691 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "msgout_len=%d, msgout=0x%x",
692 data->msgout_len, msgout);
693
694 /*
695 * set SGT ADDR (physical address)
696 */
697 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr);
698
699 /*
700 * set TRANSFER CONTROL REG
701 */
702 command = 0;
703 command |= (TRANSFER_GO | ALL_COUNTER_CLR);
704 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
705 if (scsi_bufflen(SCpnt) > 0) {
706 command |= BM_START;
707 }
708 } else if (data->trans_method & NSP32_TRANSFER_MMIO) {
709 command |= CB_MMIO_MODE;
710 } else if (data->trans_method & NSP32_TRANSFER_PIO) {
711 command |= CB_IO_MODE;
712 }
713 nsp32_write2(base, TRANSFER_CONTROL, command);
714
715 /*
716 * start AUTO SCSI, kick off arbitration
717 */
718 command = (CLEAR_CDB_FIFO_POINTER |
719 AUTOSCSI_START |
720 AUTO_MSGIN_00_OR_04 |
721 AUTO_MSGIN_02 |
722 AUTO_ATN );
723 nsp32_write2(base, COMMAND_CONTROL, command);
724
725 /*
726 * Check arbitration
727 */
728 status = nsp32_arbitration(SCpnt, base);
729
730 out:
731 /*
732 * IRQ enable
733 */
734 nsp32_write2(base, IRQ_CONTROL, 0);
735
736 return status;
737}
738
739
740/*
741 * Arbitration Status Check
742 *
743 * Note: Arbitration counter is waited during ARBIT_GO is not lifting.
744 * Using udelay(1) consumes CPU time and system time, but
745 * arbitration delay time is defined minimal 2.4us in SCSI
746 * specification, thus udelay works as coarse grained wait timer.
747 */
748static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base)
749{
750 unsigned char arbit;
751 int status = TRUE;
752 int time = 0;
753
754 do {
755 arbit = nsp32_read1(base, ARBIT_STATUS);
756 time++;
757 } while ((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 &&
758 (time <= ARBIT_TIMEOUT_TIME));
759
760 nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
761 "arbit: 0x%x, delay time: %d", arbit, time);
762
763 if (arbit & ARBIT_WIN) {
764 /* Arbitration succeeded */
765 SCpnt->result = DID_OK << 16;
766 nsp32_index_write1(base, EXT_PORT, LED_ON); /* PCI LED on */
767 } else if (arbit & ARBIT_FAIL) {
768 /* Arbitration failed */
769 SCpnt->result = DID_BUS_BUSY << 16;
770 status = FALSE;
771 } else {
772 /*
773 * unknown error or ARBIT_GO timeout,
774 * something lock up! guess no connection.
775 */
776 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "arbit timeout");
777 SCpnt->result = DID_NO_CONNECT << 16;
778 status = FALSE;
779 }
780
781 /*
782 * clear Arbit
783 */
784 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR);
785
786 return status;
787}
788
789
790/*
791 * reselection
792 *
793 * Note: This reselection routine is called from msgin_occur,
794 * reselection target id&lun must be already set.
795 * SCSI-2 says IDENTIFY implies RESTORE_POINTER operation.
796 */
797static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun)
798{
799 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
800 unsigned int host_id = SCpnt->device->host->this_id;
801 unsigned int base = SCpnt->device->host->io_port;
802 unsigned char tmpid, newid;
803
804 nsp32_dbg(NSP32_DEBUG_RESELECTION, "enter");
805
806 /*
807 * calculate reselected SCSI ID
808 */
809 tmpid = nsp32_read1(base, RESELECT_ID);
810 tmpid &= (~BIT(host_id));
811 newid = 0;
812 while (tmpid) {
813 if (tmpid & 1) {
814 break;
815 }
816 tmpid >>= 1;
817 newid++;
818 }
819
820 /*
821 * If reselected New ID:LUN is not existed
822 * or current nexus is not existed, unexpected
823 * reselection is occurred. Send reject message.
824 */
825 if (newid >= ARRAY_SIZE(data->lunt) || newlun >= ARRAY_SIZE(data->lunt[0])) {
826 nsp32_msg(KERN_WARNING, "unknown id/lun");
827 return FALSE;
828 } else if(data->lunt[newid][newlun].SCpnt == NULL) {
829 nsp32_msg(KERN_WARNING, "no SCSI command is processing");
830 return FALSE;
831 }
832
833 data->cur_id = newid;
834 data->cur_lun = newlun;
835 data->cur_target = &(data->target[newid]);
836 data->cur_lunt = &(data->lunt[newid][newlun]);
837
838 /* reset SACK/SavedACK counter (or ALL clear?) */
839 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
840
841 return TRUE;
842}
843
844
845/*
846 * nsp32_setup_sg_table - build scatter gather list for transfer data
847 * with bus master.
848 *
849 * Note: NinjaSCSI-32Bi/UDE bus master can not transfer over 64KB at a time.
850 */
851static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
852{
853 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
854 struct scatterlist *sg;
855 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
856 int num, i;
857 u32_le l;
858
859 if (sgt == NULL) {
860 nsp32_dbg(NSP32_DEBUG_SGLIST, "SGT == null");
861 return FALSE;
862 }
863
864 num = scsi_dma_map(SCpnt);
865 if (!num)
866 return TRUE;
867 else if (num < 0)
868 return FALSE;
869 else {
870 scsi_for_each_sg(SCpnt, sg, num, i) {
871 /*
872 * Build nsp32_sglist, substitute sg dma addresses.
873 */
874 sgt[i].addr = cpu_to_le32(sg_dma_address(sg));
875 sgt[i].len = cpu_to_le32(sg_dma_len(sg));
876
877 if (le32_to_cpu(sgt[i].len) > 0x10000) {
878 nsp32_msg(KERN_ERR,
879 "can't transfer over 64KB at a time, size=0x%lx", le32_to_cpu(sgt[i].len));
880 return FALSE;
881 }
882 nsp32_dbg(NSP32_DEBUG_SGLIST,
883 "num 0x%x : addr 0x%lx len 0x%lx",
884 i,
885 le32_to_cpu(sgt[i].addr),
886 le32_to_cpu(sgt[i].len ));
887 }
888
889 /* set end mark */
890 l = le32_to_cpu(sgt[num-1].len);
891 sgt[num-1].len = cpu_to_le32(l | SGTEND);
892 }
893
894 return TRUE;
895}
896
897static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
898{
899 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
900 nsp32_target *target;
901 nsp32_lunt *cur_lunt;
902 int ret;
903
904 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
905 "enter. target: 0x%x LUN: 0x%llx cmnd: 0x%x cmndlen: 0x%x "
906 "use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x",
907 SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len,
908 scsi_sg_count(SCpnt), scsi_sglist(SCpnt), scsi_bufflen(SCpnt));
909
910 if (data->CurrentSC != NULL) {
911 nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request");
912 data->CurrentSC = NULL;
913 SCpnt->result = DID_NO_CONNECT << 16;
914 done(SCpnt);
915 return 0;
916 }
917
918 /* check target ID is not same as this initiator ID */
919 if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
920 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "target==host???");
921 SCpnt->result = DID_BAD_TARGET << 16;
922 done(SCpnt);
923 return 0;
924 }
925
926 /* check target LUN is allowable value */
927 if (SCpnt->device->lun >= MAX_LUN) {
928 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "no more lun");
929 SCpnt->result = DID_BAD_TARGET << 16;
930 done(SCpnt);
931 return 0;
932 }
933
934 show_command(SCpnt);
935
936 SCpnt->scsi_done = done;
937 data->CurrentSC = SCpnt;
938 SCpnt->SCp.Status = CHECK_CONDITION;
939 SCpnt->SCp.Message = 0;
940 scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
941
942 SCpnt->SCp.ptr = (char *)scsi_sglist(SCpnt);
943 SCpnt->SCp.this_residual = scsi_bufflen(SCpnt);
944 SCpnt->SCp.buffer = NULL;
945 SCpnt->SCp.buffers_residual = 0;
946
947 /* initialize data */
948 data->msgout_len = 0;
949 data->msgin_len = 0;
950 cur_lunt = &(data->lunt[SCpnt->device->id][SCpnt->device->lun]);
951 cur_lunt->SCpnt = SCpnt;
952 cur_lunt->save_datp = 0;
953 cur_lunt->msgin03 = FALSE;
954 data->cur_lunt = cur_lunt;
955 data->cur_id = SCpnt->device->id;
956 data->cur_lun = SCpnt->device->lun;
957
958 ret = nsp32_setup_sg_table(SCpnt);
959 if (ret == FALSE) {
960 nsp32_msg(KERN_ERR, "SGT fail");
961 SCpnt->result = DID_ERROR << 16;
962 nsp32_scsi_done(SCpnt);
963 return 0;
964 }
965
966 /* Build IDENTIFY */
967 nsp32_build_identify(SCpnt);
968
969 /*
970 * If target is the first time to transfer after the reset
971 * (target don't have SDTR_DONE and SDTR_INITIATOR), sync
972 * message SDTR is needed to do synchronous transfer.
973 */
974 target = &data->target[scmd_id(SCpnt)];
975 data->cur_target = target;
976
977 if (!(target->sync_flag & (SDTR_DONE | SDTR_INITIATOR | SDTR_TARGET))) {
978 unsigned char period, offset;
979
980 if (trans_mode != ASYNC_MODE) {
981 nsp32_set_max_sync(data, target, &period, &offset);
982 nsp32_build_sdtr(SCpnt, period, offset);
983 target->sync_flag |= SDTR_INITIATOR;
984 } else {
985 nsp32_set_async(data, target);
986 target->sync_flag |= SDTR_DONE;
987 }
988
989 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
990 "SDTR: entry: %d start_period: 0x%x offset: 0x%x\n",
991 target->limit_entry, period, offset);
992 } else if (target->sync_flag & SDTR_INITIATOR) {
993 /*
994 * It was negotiating SDTR with target, sending from the
995 * initiator, but there are no chance to remove this flag.
996 * Set async because we don't get proper negotiation.
997 */
998 nsp32_set_async(data, target);
999 target->sync_flag &= ~SDTR_INITIATOR;
1000 target->sync_flag |= SDTR_DONE;
1001
1002 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1003 "SDTR_INITIATOR: fall back to async");
1004 } else if (target->sync_flag & SDTR_TARGET) {
1005 /*
1006 * It was negotiating SDTR with target, sending from target,
1007 * but there are no chance to remove this flag. Set async
1008 * because we don't get proper negotiation.
1009 */
1010 nsp32_set_async(data, target);
1011 target->sync_flag &= ~SDTR_TARGET;
1012 target->sync_flag |= SDTR_DONE;
1013
1014 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1015 "Unknown SDTR from target is reached, fall back to async.");
1016 }
1017
1018 nsp32_dbg(NSP32_DEBUG_TARGETFLAG,
1019 "target: %d sync_flag: 0x%x syncreg: 0x%x ackwidth: 0x%x",
1020 SCpnt->device->id, target->sync_flag, target->syncreg,
1021 target->ackwidth);
1022
1023 /* Selection */
1024 if (auto_param == 0) {
1025 ret = nsp32_selection_autopara(SCpnt);
1026 } else {
1027 ret = nsp32_selection_autoscsi(SCpnt);
1028 }
1029
1030 if (ret != TRUE) {
1031 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "selection fail");
1032 nsp32_scsi_done(SCpnt);
1033 }
1034
1035 return 0;
1036}
1037
1038static DEF_SCSI_QCMD(nsp32_queuecommand)
1039
1040/* initialize asic */
1041static int nsp32hw_init(nsp32_hw_data *data)
1042{
1043 unsigned int base = data->BaseAddress;
1044 unsigned short irq_stat;
1045 unsigned long lc_reg;
1046 unsigned char power;
1047
1048 lc_reg = nsp32_index_read4(base, CFG_LATE_CACHE);
1049 if ((lc_reg & 0xff00) == 0) {
1050 lc_reg |= (0x20 << 8);
1051 nsp32_index_write2(base, CFG_LATE_CACHE, lc_reg & 0xffff);
1052 }
1053
1054 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
1055 nsp32_write2(base, TRANSFER_CONTROL, 0);
1056 nsp32_write4(base, BM_CNT, 0);
1057 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
1058
1059 do {
1060 irq_stat = nsp32_read2(base, IRQ_STATUS);
1061 nsp32_dbg(NSP32_DEBUG_INIT, "irq_stat 0x%x", irq_stat);
1062 } while (irq_stat & IRQSTATUS_ANY_IRQ);
1063
1064 /*
1065 * Fill FIFO_FULL_SHLD, FIFO_EMPTY_SHLD. Below parameter is
1066 * designated by specification.
1067 */
1068 if ((data->trans_method & NSP32_TRANSFER_PIO) ||
1069 (data->trans_method & NSP32_TRANSFER_MMIO)) {
1070 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x40);
1071 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x40);
1072 } else if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
1073 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x10);
1074 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x60);
1075 } else {
1076 nsp32_dbg(NSP32_DEBUG_INIT, "unknown transfer mode");
1077 }
1078
1079 nsp32_dbg(NSP32_DEBUG_INIT, "full 0x%x emp 0x%x",
1080 nsp32_index_read1(base, FIFO_FULL_SHLD_COUNT),
1081 nsp32_index_read1(base, FIFO_EMPTY_SHLD_COUNT));
1082
1083 nsp32_index_write1(base, CLOCK_DIV, data->clock);
1084 nsp32_index_write1(base, BM_CYCLE, MEMRD_CMD1 | SGT_AUTO_PARA_MEMED_CMD);
1085 nsp32_write1(base, PARITY_CONTROL, 0); /* parity check is disable */
1086
1087 /*
1088 * initialize MISC_WRRD register
1089 *
1090 * Note: Designated parameters is obeyed as following:
1091 * MISC_SCSI_DIRECTION_DETECTOR_SELECT: It must be set.
1092 * MISC_MASTER_TERMINATION_SELECT: It must be set.
1093 * MISC_BMREQ_NEGATE_TIMING_SEL: It should be set.
1094 * MISC_AUTOSEL_TIMING_SEL: It should be set.
1095 * MISC_BMSTOP_CHANGE2_NONDATA_PHASE: It should be set.
1096 * MISC_DELAYED_BMSTART: It's selected for safety.
1097 *
1098 * Note: If MISC_BMSTOP_CHANGE2_NONDATA_PHASE is set, then
1099 * we have to set TRANSFERCONTROL_BM_START as 0 and set
1100 * appropriate value before restarting bus master transfer.
1101 */
1102 nsp32_index_write2(base, MISC_WR,
1103 (SCSI_DIRECTION_DETECTOR_SELECT |
1104 DELAYED_BMSTART |
1105 MASTER_TERMINATION_SELECT |
1106 BMREQ_NEGATE_TIMING_SEL |
1107 AUTOSEL_TIMING_SEL |
1108 BMSTOP_CHANGE2_NONDATA_PHASE));
1109
1110 nsp32_index_write1(base, TERM_PWR_CONTROL, 0);
1111 power = nsp32_index_read1(base, TERM_PWR_CONTROL);
1112 if (!(power & SENSE)) {
1113 nsp32_msg(KERN_INFO, "term power on");
1114 nsp32_index_write1(base, TERM_PWR_CONTROL, BPWR);
1115 }
1116
1117 nsp32_write2(base, TIMER_SET, TIMER_STOP);
1118 nsp32_write2(base, TIMER_SET, TIMER_STOP); /* Required 2 times */
1119
1120 nsp32_write1(base, SYNC_REG, 0);
1121 nsp32_write1(base, ACK_WIDTH, 0);
1122 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
1123
1124 /*
1125 * enable to select designated IRQ (except for
1126 * IRQSELECT_SERR, IRQSELECT_PERR, IRQSELECT_BMCNTERR)
1127 */
1128 nsp32_index_write2(base, IRQ_SELECT, IRQSELECT_TIMER_IRQ |
1129 IRQSELECT_SCSIRESET_IRQ |
1130 IRQSELECT_FIFO_SHLD_IRQ |
1131 IRQSELECT_RESELECT_IRQ |
1132 IRQSELECT_PHASE_CHANGE_IRQ |
1133 IRQSELECT_AUTO_SCSI_SEQ_IRQ |
1134 // IRQSELECT_BMCNTERR_IRQ |
1135 IRQSELECT_TARGET_ABORT_IRQ |
1136 IRQSELECT_MASTER_ABORT_IRQ );
1137 nsp32_write2(base, IRQ_CONTROL, 0);
1138
1139 /* PCI LED off */
1140 nsp32_index_write1(base, EXT_PORT_DDR, LED_OFF);
1141 nsp32_index_write1(base, EXT_PORT, LED_OFF);
1142
1143 return TRUE;
1144}
1145
1146
1147/* interrupt routine */
1148static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
1149{
1150 nsp32_hw_data *data = dev_id;
1151 unsigned int base = data->BaseAddress;
1152 struct scsi_cmnd *SCpnt = data->CurrentSC;
1153 unsigned short auto_stat, irq_stat, trans_stat;
1154 unsigned char busmon, busphase;
1155 unsigned long flags;
1156 int ret;
1157 int handled = 0;
1158 struct Scsi_Host *host = data->Host;
1159
1160 spin_lock_irqsave(host->host_lock, flags);
1161
1162 /*
1163 * IRQ check, then enable IRQ mask
1164 */
1165 irq_stat = nsp32_read2(base, IRQ_STATUS);
1166 nsp32_dbg(NSP32_DEBUG_INTR,
1167 "enter IRQ: %d, IRQstatus: 0x%x", irq, irq_stat);
1168 /* is this interrupt comes from Ninja asic? */
1169 if ((irq_stat & IRQSTATUS_ANY_IRQ) == 0) {
1170 nsp32_dbg(NSP32_DEBUG_INTR, "shared interrupt: irq other 0x%x", irq_stat);
1171 goto out2;
1172 }
1173 handled = 1;
1174 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
1175
1176 busmon = nsp32_read1(base, SCSI_BUS_MONITOR);
1177 busphase = busmon & BUSMON_PHASE_MASK;
1178
1179 trans_stat = nsp32_read2(base, TRANSFER_STATUS);
1180 if ((irq_stat == 0xffff) && (trans_stat == 0xffff)) {
1181 nsp32_msg(KERN_INFO, "card disconnect");
1182 if (data->CurrentSC != NULL) {
1183 nsp32_msg(KERN_INFO, "clean up current SCSI command");
1184 SCpnt->result = DID_BAD_TARGET << 16;
1185 nsp32_scsi_done(SCpnt);
1186 }
1187 goto out;
1188 }
1189
1190 /* Timer IRQ */
1191 if (irq_stat & IRQSTATUS_TIMER_IRQ) {
1192 nsp32_dbg(NSP32_DEBUG_INTR, "timer stop");
1193 nsp32_write2(base, TIMER_SET, TIMER_STOP);
1194 goto out;
1195 }
1196
1197 /* SCSI reset */
1198 if (irq_stat & IRQSTATUS_SCSIRESET_IRQ) {
1199 nsp32_msg(KERN_INFO, "detected someone do bus reset");
1200 nsp32_do_bus_reset(data);
1201 if (SCpnt != NULL) {
1202 SCpnt->result = DID_RESET << 16;
1203 nsp32_scsi_done(SCpnt);
1204 }
1205 goto out;
1206 }
1207
1208 if (SCpnt == NULL) {
1209 nsp32_msg(KERN_WARNING, "SCpnt==NULL this can't be happened");
1210 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1211 goto out;
1212 }
1213
1214 /*
1215 * AutoSCSI Interrupt.
1216 * Note: This interrupt is occurred when AutoSCSI is finished. Then
1217 * check SCSIEXECUTEPHASE, and do appropriate action. Each phases are
1218 * recorded when AutoSCSI sequencer has been processed.
1219 */
1220 if(irq_stat & IRQSTATUS_AUTOSCSI_IRQ) {
1221 /* getting SCSI executed phase */
1222 auto_stat = nsp32_read2(base, SCSI_EXECUTE_PHASE);
1223 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
1224
1225 /* Selection Timeout, go busfree phase. */
1226 if (auto_stat & SELECTION_TIMEOUT) {
1227 nsp32_dbg(NSP32_DEBUG_INTR,
1228 "selection timeout occurred");
1229
1230 SCpnt->result = DID_TIME_OUT << 16;
1231 nsp32_scsi_done(SCpnt);
1232 goto out;
1233 }
1234
1235 if (auto_stat & MSGOUT_PHASE) {
1236 /*
1237 * MsgOut phase was processed.
1238 * If MSG_IN_OCCUER is not set, then MsgOut phase is
1239 * completed. Thus, msgout_len must reset. Otherwise,
1240 * nothing to do here. If MSG_OUT_OCCUER is occurred,
1241 * then we will encounter the condition and check.
1242 */
1243 if (!(auto_stat & MSG_IN_OCCUER) &&
1244 (data->msgout_len <= 3)) {
1245 /*
1246 * !MSG_IN_OCCUER && msgout_len <=3
1247 * ---> AutoSCSI with MSGOUTreg is processed.
1248 */
1249 data->msgout_len = 0;
1250 };
1251
1252 nsp32_dbg(NSP32_DEBUG_INTR, "MsgOut phase processed");
1253 }
1254
1255 if ((auto_stat & DATA_IN_PHASE) &&
1256 (scsi_get_resid(SCpnt) > 0) &&
1257 ((nsp32_read2(base, FIFO_REST_CNT) & FIFO_REST_MASK) != 0)) {
1258 printk( "auto+fifo\n");
1259 //nsp32_pio_read(SCpnt);
1260 }
1261
1262 if (auto_stat & (DATA_IN_PHASE | DATA_OUT_PHASE)) {
1263 /* DATA_IN_PHASE/DATA_OUT_PHASE was processed. */
1264 nsp32_dbg(NSP32_DEBUG_INTR,
1265 "Data in/out phase processed");
1266
1267 /* read BMCNT, SGT pointer addr */
1268 nsp32_dbg(NSP32_DEBUG_INTR, "BMCNT=0x%lx",
1269 nsp32_read4(base, BM_CNT));
1270 nsp32_dbg(NSP32_DEBUG_INTR, "addr=0x%lx",
1271 nsp32_read4(base, SGT_ADR));
1272 nsp32_dbg(NSP32_DEBUG_INTR, "SACK=0x%lx",
1273 nsp32_read4(base, SACK_CNT));
1274 nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx",
1275 nsp32_read4(base, SAVED_SACK_CNT));
1276
1277 scsi_set_resid(SCpnt, 0); /* all data transferred! */
1278 }
1279
1280 /*
1281 * MsgIn Occur
1282 */
1283 if (auto_stat & MSG_IN_OCCUER) {
1284 nsp32_msgin_occur(SCpnt, irq_stat, auto_stat);
1285 }
1286
1287 /*
1288 * MsgOut Occur
1289 */
1290 if (auto_stat & MSG_OUT_OCCUER) {
1291 nsp32_msgout_occur(SCpnt);
1292 }
1293
1294 /*
1295 * Bus Free Occur
1296 */
1297 if (auto_stat & BUS_FREE_OCCUER) {
1298 ret = nsp32_busfree_occur(SCpnt, auto_stat);
1299 if (ret == TRUE) {
1300 goto out;
1301 }
1302 }
1303
1304 if (auto_stat & STATUS_PHASE) {
1305 /*
1306 * Read CSB and substitute CSB for SCpnt->result
1307 * to save status phase stutas byte.
1308 * scsi error handler checks host_byte (DID_*:
1309 * low level driver to indicate status), then checks
1310 * status_byte (SCSI status byte).
1311 */
1312 SCpnt->result = (int)nsp32_read1(base, SCSI_CSB_IN);
1313 }
1314
1315 if (auto_stat & ILLEGAL_PHASE) {
1316 /* Illegal phase is detected. SACK is not back. */
1317 nsp32_msg(KERN_WARNING,
1318 "AUTO SCSI ILLEGAL PHASE OCCUR!!!!");
1319
1320 /* TODO: currently we don't have any action... bus reset? */
1321
1322 /*
1323 * To send back SACK, assert, wait, and negate.
1324 */
1325 nsp32_sack_assert(data);
1326 nsp32_wait_req(data, NEGATE);
1327 nsp32_sack_negate(data);
1328
1329 }
1330
1331 if (auto_stat & COMMAND_PHASE) {
1332 /* nothing to do */
1333 nsp32_dbg(NSP32_DEBUG_INTR, "Command phase processed");
1334 }
1335
1336 if (auto_stat & AUTOSCSI_BUSY) {
1337 /* AutoSCSI is running */
1338 }
1339
1340 show_autophase(auto_stat);
1341 }
1342
1343 /* FIFO_SHLD_IRQ */
1344 if (irq_stat & IRQSTATUS_FIFO_SHLD_IRQ) {
1345 nsp32_dbg(NSP32_DEBUG_INTR, "FIFO IRQ");
1346
1347 switch(busphase) {
1348 case BUSPHASE_DATA_OUT:
1349 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/write");
1350
1351 //nsp32_pio_write(SCpnt);
1352
1353 break;
1354
1355 case BUSPHASE_DATA_IN:
1356 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/read");
1357
1358 //nsp32_pio_read(SCpnt);
1359
1360 break;
1361
1362 case BUSPHASE_STATUS:
1363 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/status");
1364
1365 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1366
1367 break;
1368 default:
1369 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/other phase");
1370 nsp32_dbg(NSP32_DEBUG_INTR, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1371 show_busphase(busphase);
1372 break;
1373 }
1374
1375 goto out;
1376 }
1377
1378 /* Phase Change IRQ */
1379 if (irq_stat & IRQSTATUS_PHASE_CHANGE_IRQ) {
1380 nsp32_dbg(NSP32_DEBUG_INTR, "phase change IRQ");
1381
1382 switch(busphase) {
1383 case BUSPHASE_MESSAGE_IN:
1384 nsp32_dbg(NSP32_DEBUG_INTR, "phase chg/msg in");
1385 nsp32_msgin_occur(SCpnt, irq_stat, 0);
1386 break;
1387 default:
1388 nsp32_msg(KERN_WARNING, "phase chg/other phase?");
1389 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x\n",
1390 irq_stat, trans_stat);
1391 show_busphase(busphase);
1392 break;
1393 }
1394 goto out;
1395 }
1396
1397 /* PCI_IRQ */
1398 if (irq_stat & IRQSTATUS_PCI_IRQ) {
1399 nsp32_dbg(NSP32_DEBUG_INTR, "PCI IRQ occurred");
1400 /* Do nothing */
1401 }
1402
1403 /* BMCNTERR_IRQ */
1404 if (irq_stat & IRQSTATUS_BMCNTERR_IRQ) {
1405 nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
1406 /*
1407 * TODO: To be implemented improving bus master
1408 * transfer reliability when BMCNTERR is occurred in
1409 * AutoSCSI phase described in specification.
1410 */
1411 }
1412
1413#if 0
1414 nsp32_dbg(NSP32_DEBUG_INTR,
1415 "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1416 show_busphase(busphase);
1417#endif
1418
1419 out:
1420 /* disable IRQ mask */
1421 nsp32_write2(base, IRQ_CONTROL, 0);
1422
1423 out2:
1424 spin_unlock_irqrestore(host->host_lock, flags);
1425
1426 nsp32_dbg(NSP32_DEBUG_INTR, "exit");
1427
1428 return IRQ_RETVAL(handled);
1429}
1430
1431
1432static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
1433{
1434 unsigned long flags;
1435 nsp32_hw_data *data;
1436 int hostno;
1437 unsigned int base;
1438 unsigned char mode_reg;
1439 int id, speed;
1440 long model;
1441
1442 hostno = host->host_no;
1443 data = (nsp32_hw_data *)host->hostdata;
1444 base = host->io_port;
1445
1446 seq_puts(m, "NinjaSCSI-32 status\n\n");
1447 seq_printf(m, "Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
1448 seq_printf(m, "SCSI host No.: %d\n", hostno);
1449 seq_printf(m, "IRQ: %d\n", host->irq);
1450 seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
1451 seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
1452 seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize);
1453 seq_printf(m, "Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
1454
1455 mode_reg = nsp32_index_read1(base, CHIP_MODE);
1456 model = data->pci_devid->driver_data;
1457
1458#ifdef CONFIG_PM
1459 seq_printf(m, "Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
1460#endif
1461 seq_printf(m, "OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
1462
1463 spin_lock_irqsave(&(data->Lock), flags);
1464 seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
1465 spin_unlock_irqrestore(&(data->Lock), flags);
1466
1467
1468 seq_puts(m, "SDTR status\n");
1469 for (id = 0; id < ARRAY_SIZE(data->target); id++) {
1470
1471 seq_printf(m, "id %d: ", id);
1472
1473 if (id == host->this_id) {
1474 seq_puts(m, "----- NinjaSCSI-32 host adapter\n");
1475 continue;
1476 }
1477
1478 if (data->target[id].sync_flag == SDTR_DONE) {
1479 if (data->target[id].period == 0 &&
1480 data->target[id].offset == ASYNC_OFFSET ) {
1481 seq_puts(m, "async");
1482 } else {
1483 seq_puts(m, " sync");
1484 }
1485 } else {
1486 seq_puts(m, " none");
1487 }
1488
1489 if (data->target[id].period != 0) {
1490
1491 speed = 1000000 / (data->target[id].period * 4);
1492
1493 seq_printf(m, " transfer %d.%dMB/s, offset %d",
1494 speed / 1000,
1495 speed % 1000,
1496 data->target[id].offset
1497 );
1498 }
1499 seq_putc(m, '\n');
1500 }
1501 return 0;
1502}
1503
1504
1505
1506/*
1507 * Reset parameters and call scsi_done for data->cur_lunt.
1508 * Be careful setting SCpnt->result = DID_* before calling this function.
1509 */
1510static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
1511{
1512 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1513 unsigned int base = SCpnt->device->host->io_port;
1514
1515 scsi_dma_unmap(SCpnt);
1516
1517 /*
1518 * clear TRANSFERCONTROL_BM_START
1519 */
1520 nsp32_write2(base, TRANSFER_CONTROL, 0);
1521 nsp32_write4(base, BM_CNT, 0);
1522
1523 /*
1524 * call scsi_done
1525 */
1526 (*SCpnt->scsi_done)(SCpnt);
1527
1528 /*
1529 * reset parameters
1530 */
1531 data->cur_lunt->SCpnt = NULL;
1532 data->cur_lunt = NULL;
1533 data->cur_target = NULL;
1534 data->CurrentSC = NULL;
1535}
1536
1537
1538/*
1539 * Bus Free Occur
1540 *
1541 * Current Phase is BUSFREE. AutoSCSI is automatically execute BUSFREE phase
1542 * with ACK reply when below condition is matched:
1543 * MsgIn 00: Command Complete.
1544 * MsgIn 02: Save Data Pointer.
1545 * MsgIn 04: Diconnect.
1546 * In other case, unexpected BUSFREE is detected.
1547 */
1548static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
1549{
1550 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1551 unsigned int base = SCpnt->device->host->io_port;
1552
1553 nsp32_dbg(NSP32_DEBUG_BUSFREE, "enter execph=0x%x", execph);
1554 show_autophase(execph);
1555
1556 nsp32_write4(base, BM_CNT, 0);
1557 nsp32_write2(base, TRANSFER_CONTROL, 0);
1558
1559 /*
1560 * MsgIn 02: Save Data Pointer
1561 *
1562 * VALID:
1563 * Save Data Pointer is received. Adjust pointer.
1564 *
1565 * NO-VALID:
1566 * SCSI-3 says if Save Data Pointer is not received, then we restart
1567 * processing and we can't adjust any SCSI data pointer in next data
1568 * phase.
1569 */
1570 if (execph & MSGIN_02_VALID) {
1571 nsp32_dbg(NSP32_DEBUG_BUSFREE, "MsgIn02_Valid");
1572
1573 /*
1574 * Check sack_cnt/saved_sack_cnt, then adjust sg table if
1575 * needed.
1576 */
1577 if (!(execph & MSGIN_00_VALID) &&
1578 ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE))) {
1579 unsigned int sacklen, s_sacklen;
1580
1581 /*
1582 * Read SACK count and SAVEDSACK count, then compare.
1583 */
1584 sacklen = nsp32_read4(base, SACK_CNT );
1585 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT);
1586
1587 /*
1588 * If SAVEDSACKCNT == 0, it means SavedDataPointer is
1589 * come after data transferring.
1590 */
1591 if (s_sacklen > 0) {
1592 /*
1593 * Comparing between sack and savedsack to
1594 * check the condition of AutoMsgIn03.
1595 *
1596 * If they are same, set msgin03 == TRUE,
1597 * COMMANDCONTROL_AUTO_MSGIN_03 is enabled at
1598 * reselection. On the other hand, if they
1599 * aren't same, set msgin03 == FALSE, and
1600 * COMMANDCONTROL_AUTO_MSGIN_03 is disabled at
1601 * reselection.
1602 */
1603 if (sacklen != s_sacklen) {
1604 data->cur_lunt->msgin03 = FALSE;
1605 } else {
1606 data->cur_lunt->msgin03 = TRUE;
1607 }
1608
1609 nsp32_adjust_busfree(SCpnt, s_sacklen);
1610 }
1611 }
1612
1613 /* This value has not substitude with valid value yet... */
1614 //data->cur_lunt->save_datp = data->cur_datp;
1615 } else {
1616 /*
1617 * no processing.
1618 */
1619 }
1620
1621 if (execph & MSGIN_03_VALID) {
1622 /* MsgIn03 was valid to be processed. No need processing. */
1623 }
1624
1625 /*
1626 * target SDTR check
1627 */
1628 if (data->cur_target->sync_flag & SDTR_INITIATOR) {
1629 /*
1630 * SDTR negotiation pulled by the initiator has not
1631 * finished yet. Fall back to ASYNC mode.
1632 */
1633 nsp32_set_async(data, data->cur_target);
1634 data->cur_target->sync_flag &= ~SDTR_INITIATOR;
1635 data->cur_target->sync_flag |= SDTR_DONE;
1636 } else if (data->cur_target->sync_flag & SDTR_TARGET) {
1637 /*
1638 * SDTR negotiation pulled by the target has been
1639 * negotiating.
1640 */
1641 if (execph & (MSGIN_00_VALID | MSGIN_04_VALID)) {
1642 /*
1643 * If valid message is received, then
1644 * negotiation is succeeded.
1645 */
1646 } else {
1647 /*
1648 * On the contrary, if unexpected bus free is
1649 * occurred, then negotiation is failed. Fall
1650 * back to ASYNC mode.
1651 */
1652 nsp32_set_async(data, data->cur_target);
1653 }
1654 data->cur_target->sync_flag &= ~SDTR_TARGET;
1655 data->cur_target->sync_flag |= SDTR_DONE;
1656 }
1657
1658 /*
1659 * It is always ensured by SCSI standard that initiator
1660 * switches into Bus Free Phase after
1661 * receiving message 00 (Command Complete), 04 (Disconnect).
1662 * It's the reason that processing here is valid.
1663 */
1664 if (execph & MSGIN_00_VALID) {
1665 /* MsgIn 00: Command Complete */
1666 nsp32_dbg(NSP32_DEBUG_BUSFREE, "command complete");
1667
1668 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1669 SCpnt->SCp.Message = 0;
1670 nsp32_dbg(NSP32_DEBUG_BUSFREE,
1671 "normal end stat=0x%x resid=0x%x\n",
1672 SCpnt->SCp.Status, scsi_get_resid(SCpnt));
1673 SCpnt->result = (DID_OK << 16) |
1674 (SCpnt->SCp.Message << 8) |
1675 (SCpnt->SCp.Status << 0);
1676 nsp32_scsi_done(SCpnt);
1677 /* All operation is done */
1678 return TRUE;
1679 } else if (execph & MSGIN_04_VALID) {
1680 /* MsgIn 04: Disconnect */
1681 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1682 SCpnt->SCp.Message = 4;
1683
1684 nsp32_dbg(NSP32_DEBUG_BUSFREE, "disconnect");
1685 return TRUE;
1686 } else {
1687 /* Unexpected bus free */
1688 nsp32_msg(KERN_WARNING, "unexpected bus free occurred");
1689
1690 /* DID_ERROR? */
1691 //SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Message << 8) | (SCpnt->SCp.Status << 0);
1692 SCpnt->result = DID_ERROR << 16;
1693 nsp32_scsi_done(SCpnt);
1694 return TRUE;
1695 }
1696 return FALSE;
1697}
1698
1699
1700/*
1701 * nsp32_adjust_busfree - adjusting SG table
1702 *
1703 * Note: This driver adjust the SG table using SCSI ACK
1704 * counter instead of BMCNT counter!
1705 */
1706static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen)
1707{
1708 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1709 int old_entry = data->cur_entry;
1710 int new_entry;
1711 int sg_num = data->cur_lunt->sg_num;
1712 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
1713 unsigned int restlen, sentlen;
1714 u32_le len, addr;
1715
1716 nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", scsi_get_resid(SCpnt));
1717
1718 /* adjust saved SACK count with 4 byte start address boundary */
1719 s_sacklen -= le32_to_cpu(sgt[old_entry].addr) & 3;
1720
1721 /*
1722 * calculate new_entry from sack count and each sgt[].len
1723 * calculate the byte which is intent to send
1724 */
1725 sentlen = 0;
1726 for (new_entry = old_entry; new_entry < sg_num; new_entry++) {
1727 sentlen += (le32_to_cpu(sgt[new_entry].len) & ~SGTEND);
1728 if (sentlen > s_sacklen) {
1729 break;
1730 }
1731 }
1732
1733 /* all sgt is processed */
1734 if (new_entry == sg_num) {
1735 goto last;
1736 }
1737
1738 if (sentlen == s_sacklen) {
1739 /* XXX: confirm it's ok or not */
1740 /* In this case, it's ok because we are at
1741 the head element of the sg. restlen is correctly calculated. */
1742 }
1743
1744 /* calculate the rest length for transferring */
1745 restlen = sentlen - s_sacklen;
1746
1747 /* update adjusting current SG table entry */
1748 len = le32_to_cpu(sgt[new_entry].len);
1749 addr = le32_to_cpu(sgt[new_entry].addr);
1750 addr += (len - restlen);
1751 sgt[new_entry].addr = cpu_to_le32(addr);
1752 sgt[new_entry].len = cpu_to_le32(restlen);
1753
1754 /* set cur_entry with new_entry */
1755 data->cur_entry = new_entry;
1756
1757 return;
1758
1759 last:
1760 if (scsi_get_resid(SCpnt) < sentlen) {
1761 nsp32_msg(KERN_ERR, "resid underflow");
1762 }
1763
1764 scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) - sentlen);
1765 nsp32_dbg(NSP32_DEBUG_SGLIST, "new resid=0x%x", scsi_get_resid(SCpnt));
1766
1767 /* update hostdata and lun */
1768
1769 return;
1770}
1771
1772
1773/*
1774 * It's called MsgOut phase occur.
1775 * NinjaSCSI-32Bi/UDE automatically processes up to 3 messages in
1776 * message out phase. It, however, has more than 3 messages,
1777 * HBA creates the interrupt and we have to process by hand.
1778 */
1779static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)
1780{
1781 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1782 unsigned int base = SCpnt->device->host->io_port;
1783 //unsigned short command;
1784 long new_sgtp;
1785 int i;
1786
1787 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
1788 "enter: msgout_len: 0x%x", data->msgout_len);
1789
1790 /*
1791 * If MsgOut phase is occurred without having any
1792 * message, then No_Operation is sent (SCSI-2).
1793 */
1794 if (data->msgout_len == 0) {
1795 nsp32_build_nop(SCpnt);
1796 }
1797
1798 /*
1799 * Set SGTP ADDR current entry for restarting AUTOSCSI,
1800 * because SGTP is incremented next point.
1801 * There is few statement in the specification...
1802 */
1803 new_sgtp = data->cur_lunt->sglun_paddr +
1804 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
1805
1806 /*
1807 * send messages
1808 */
1809 for (i = 0; i < data->msgout_len; i++) {
1810 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
1811 "%d : 0x%x", i, data->msgoutbuf[i]);
1812
1813 /*
1814 * Check REQ is asserted.
1815 */
1816 nsp32_wait_req(data, ASSERT);
1817
1818 if (i == (data->msgout_len - 1)) {
1819 /*
1820 * If the last message, set the AutoSCSI restart
1821 * before send back the ack message. AutoSCSI
1822 * restart automatically negate ATN signal.
1823 */
1824 //command = (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02);
1825 //nsp32_restart_autoscsi(SCpnt, command);
1826 nsp32_write2(base, COMMAND_CONTROL,
1827 (CLEAR_CDB_FIFO_POINTER |
1828 AUTO_COMMAND_PHASE |
1829 AUTOSCSI_RESTART |
1830 AUTO_MSGIN_00_OR_04 |
1831 AUTO_MSGIN_02 ));
1832 }
1833 /*
1834 * Write data with SACK, then wait sack is
1835 * automatically negated.
1836 */
1837 nsp32_write1(base, SCSI_DATA_WITH_ACK, data->msgoutbuf[i]);
1838 nsp32_wait_sack(data, NEGATE);
1839
1840 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "bus: 0x%x\n",
1841 nsp32_read1(base, SCSI_BUS_MONITOR));
1842 };
1843
1844 data->msgout_len = 0;
1845
1846 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "exit");
1847}
1848
1849/*
1850 * Restart AutoSCSI
1851 *
1852 * Note: Restarting AutoSCSI needs set:
1853 * SYNC_REG, ACK_WIDTH, SGT_ADR, TRANSFER_CONTROL
1854 */
1855static void nsp32_restart_autoscsi(struct scsi_cmnd *SCpnt, unsigned short command)
1856{
1857 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1858 unsigned int base = data->BaseAddress;
1859 unsigned short transfer = 0;
1860
1861 nsp32_dbg(NSP32_DEBUG_RESTART, "enter");
1862
1863 if (data->cur_target == NULL || data->cur_lunt == NULL) {
1864 nsp32_msg(KERN_ERR, "Target or Lun is invalid");
1865 }
1866
1867 /*
1868 * set SYNC_REG
1869 * Don't set BM_START_ADR before setting this register.
1870 */
1871 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg);
1872
1873 /*
1874 * set ACKWIDTH
1875 */
1876 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth);
1877
1878 /*
1879 * set SREQ hazard killer sampling rate
1880 */
1881 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg);
1882
1883 /*
1884 * set SGT ADDR (physical address)
1885 */
1886 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr);
1887
1888 /*
1889 * set TRANSFER CONTROL REG
1890 */
1891 transfer = 0;
1892 transfer |= (TRANSFER_GO | ALL_COUNTER_CLR);
1893 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
1894 if (scsi_bufflen(SCpnt) > 0) {
1895 transfer |= BM_START;
1896 }
1897 } else if (data->trans_method & NSP32_TRANSFER_MMIO) {
1898 transfer |= CB_MMIO_MODE;
1899 } else if (data->trans_method & NSP32_TRANSFER_PIO) {
1900 transfer |= CB_IO_MODE;
1901 }
1902 nsp32_write2(base, TRANSFER_CONTROL, transfer);
1903
1904 /*
1905 * restart AutoSCSI
1906 *
1907 * TODO: COMMANDCONTROL_AUTO_COMMAND_PHASE is needed ?
1908 */
1909 command |= (CLEAR_CDB_FIFO_POINTER |
1910 AUTO_COMMAND_PHASE |
1911 AUTOSCSI_RESTART );
1912 nsp32_write2(base, COMMAND_CONTROL, command);
1913
1914 nsp32_dbg(NSP32_DEBUG_RESTART, "exit");
1915}
1916
1917
1918/*
1919 * cannot run automatically message in occur
1920 */
1921static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
1922 unsigned long irq_status,
1923 unsigned short execph)
1924{
1925 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1926 unsigned int base = SCpnt->device->host->io_port;
1927 unsigned char msg;
1928 unsigned char msgtype;
1929 unsigned char newlun;
1930 unsigned short command = 0;
1931 int msgclear = TRUE;
1932 long new_sgtp;
1933 int ret;
1934
1935 /*
1936 * read first message
1937 * Use SCSIDATA_W_ACK instead of SCSIDATAIN, because the procedure
1938 * of Message-In have to be processed before sending back SCSI ACK.
1939 */
1940 msg = nsp32_read1(base, SCSI_DATA_IN);
1941 data->msginbuf[(unsigned char)data->msgin_len] = msg;
1942 msgtype = data->msginbuf[0];
1943 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR,
1944 "enter: msglen: 0x%x msgin: 0x%x msgtype: 0x%x",
1945 data->msgin_len, msg, msgtype);
1946
1947 /*
1948 * TODO: We need checking whether bus phase is message in?
1949 */
1950
1951 /*
1952 * assert SCSI ACK
1953 */
1954 nsp32_sack_assert(data);
1955
1956 /*
1957 * processing IDENTIFY
1958 */
1959 if (msgtype & 0x80) {
1960 if (!(irq_status & IRQSTATUS_RESELECT_OCCUER)) {
1961 /* Invalid (non reselect) phase */
1962 goto reject;
1963 }
1964
1965 newlun = msgtype & 0x1f; /* TODO: SPI-3 compliant? */
1966 ret = nsp32_reselection(SCpnt, newlun);
1967 if (ret == TRUE) {
1968 goto restart;
1969 } else {
1970 goto reject;
1971 }
1972 }
1973
1974 /*
1975 * processing messages except for IDENTIFY
1976 *
1977 * TODO: Messages are all SCSI-2 terminology. SCSI-3 compliance is TODO.
1978 */
1979 switch (msgtype) {
1980 /*
1981 * 1-byte message
1982 */
1983 case COMMAND_COMPLETE:
1984 case DISCONNECT:
1985 /*
1986 * These messages should not be occurred.
1987 * They should be processed on AutoSCSI sequencer.
1988 */
1989 nsp32_msg(KERN_WARNING,
1990 "unexpected message of AutoSCSI MsgIn: 0x%x", msg);
1991 break;
1992
1993 case RESTORE_POINTERS:
1994 /*
1995 * AutoMsgIn03 is disabled, and HBA gets this message.
1996 */
1997
1998 if ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE)) {
1999 unsigned int s_sacklen;
2000
2001 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT);
2002 if ((execph & MSGIN_02_VALID) && (s_sacklen > 0)) {
2003 nsp32_adjust_busfree(SCpnt, s_sacklen);
2004 } else {
2005 /* No need to rewrite SGT */
2006 }
2007 }
2008 data->cur_lunt->msgin03 = FALSE;
2009
2010 /* Update with the new value */
2011
2012 /* reset SACK/SavedACK counter (or ALL clear?) */
2013 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
2014
2015 /*
2016 * set new sg pointer
2017 */
2018 new_sgtp = data->cur_lunt->sglun_paddr +
2019 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
2020 nsp32_write4(base, SGT_ADR, new_sgtp);
2021
2022 break;
2023
2024 case SAVE_POINTERS:
2025 /*
2026 * These messages should not be occurred.
2027 * They should be processed on AutoSCSI sequencer.
2028 */
2029 nsp32_msg (KERN_WARNING,
2030 "unexpected message of AutoSCSI MsgIn: SAVE_POINTERS");
2031
2032 break;
2033
2034 case MESSAGE_REJECT:
2035 /* If previous message_out is sending SDTR, and get
2036 message_reject from target, SDTR negotiation is failed */
2037 if (data->cur_target->sync_flag &
2038 (SDTR_INITIATOR | SDTR_TARGET)) {
2039 /*
2040 * Current target is negotiating SDTR, but it's
2041 * failed. Fall back to async transfer mode, and set
2042 * SDTR_DONE.
2043 */
2044 nsp32_set_async(data, data->cur_target);
2045 data->cur_target->sync_flag &= ~SDTR_INITIATOR;
2046 data->cur_target->sync_flag |= SDTR_DONE;
2047
2048 }
2049 break;
2050
2051 case LINKED_CMD_COMPLETE:
2052 case LINKED_FLG_CMD_COMPLETE:
2053 /* queue tag is not supported currently */
2054 nsp32_msg (KERN_WARNING,
2055 "unsupported message: 0x%x", msgtype);
2056 break;
2057
2058 case INITIATE_RECOVERY:
2059 /* staring ECA (Extended Contingent Allegiance) state. */
2060 /* This message is declined in SPI2 or later. */
2061
2062 goto reject;
2063
2064 /*
2065 * 2-byte message
2066 */
2067 case SIMPLE_QUEUE_TAG:
2068 case 0x23:
2069 /*
2070 * 0x23: Ignore_Wide_Residue is not declared in scsi.h.
2071 * No support is needed.
2072 */
2073 if (data->msgin_len >= 1) {
2074 goto reject;
2075 }
2076
2077 /* current position is 1-byte of 2 byte */
2078 msgclear = FALSE;
2079
2080 break;
2081
2082 /*
2083 * extended message
2084 */
2085 case EXTENDED_MESSAGE:
2086 if (data->msgin_len < 1) {
2087 /*
2088 * Current position does not reach 2-byte
2089 * (2-byte is extended message length).
2090 */
2091 msgclear = FALSE;
2092 break;
2093 }
2094
2095 if ((data->msginbuf[1] + 1) > data->msgin_len) {
2096 /*
2097 * Current extended message has msginbuf[1] + 2
2098 * (msgin_len starts counting from 0, so buf[1] + 1).
2099 * If current message position is not finished,
2100 * continue receiving message.
2101 */
2102 msgclear = FALSE;
2103 break;
2104 }
2105
2106 /*
2107 * Reach here means regular length of each type of
2108 * extended messages.
2109 */
2110 switch (data->msginbuf[2]) {
2111 case EXTENDED_MODIFY_DATA_POINTER:
2112 /* TODO */
2113 goto reject; /* not implemented yet */
2114 break;
2115
2116 case EXTENDED_SDTR:
2117 /*
2118 * Exchange this message between initiator and target.
2119 */
2120 if (data->msgin_len != EXTENDED_SDTR_LEN + 1) {
2121 /*
2122 * received inappropriate message.
2123 */
2124 goto reject;
2125 break;
2126 }
2127
2128 nsp32_analyze_sdtr(SCpnt);
2129
2130 break;
2131
2132 case EXTENDED_EXTENDED_IDENTIFY:
2133 /* SCSI-I only, not supported. */
2134 goto reject; /* not implemented yet */
2135
2136 break;
2137
2138 case EXTENDED_WDTR:
2139 goto reject; /* not implemented yet */
2140
2141 break;
2142
2143 default:
2144 goto reject;
2145 }
2146 break;
2147
2148 default:
2149 goto reject;
2150 }
2151
2152 restart:
2153 if (msgclear == TRUE) {
2154 data->msgin_len = 0;
2155
2156 /*
2157 * If restarting AutoSCSI, but there are some message to out
2158 * (msgout_len > 0), set AutoATN, and set SCSIMSGOUT as 0
2159 * (MV_VALID = 0). When commandcontrol is written with
2160 * AutoSCSI restart, at the same time MsgOutOccur should be
2161 * happened (however, such situation is really possible...?).
2162 */
2163 if (data->msgout_len > 0) {
2164 nsp32_write4(base, SCSI_MSG_OUT, 0);
2165 command |= AUTO_ATN;
2166 }
2167
2168 /*
2169 * restart AutoSCSI
2170 * If it's failed, COMMANDCONTROL_AUTO_COMMAND_PHASE is needed.
2171 */
2172 command |= (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02);
2173
2174 /*
2175 * If current msgin03 is TRUE, then flag on.
2176 */
2177 if (data->cur_lunt->msgin03 == TRUE) {
2178 command |= AUTO_MSGIN_03;
2179 }
2180 data->cur_lunt->msgin03 = FALSE;
2181 } else {
2182 data->msgin_len++;
2183 }
2184
2185 /*
2186 * restart AutoSCSI
2187 */
2188 nsp32_restart_autoscsi(SCpnt, command);
2189
2190 /*
2191 * wait SCSI REQ negate for REQ-ACK handshake
2192 */
2193 nsp32_wait_req(data, NEGATE);
2194
2195 /*
2196 * negate SCSI ACK
2197 */
2198 nsp32_sack_negate(data);
2199
2200 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit");
2201
2202 return;
2203
2204 reject:
2205 nsp32_msg(KERN_WARNING,
2206 "invalid or unsupported MessageIn, rejected. "
2207 "current msg: 0x%x (len: 0x%x), processing msg: 0x%x",
2208 msg, data->msgin_len, msgtype);
2209 nsp32_build_reject(SCpnt);
2210 data->msgin_len = 0;
2211
2212 goto restart;
2213}
2214
2215/*
2216 *
2217 */
2218static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
2219{
2220 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2221 nsp32_target *target = data->cur_target;
2222 nsp32_sync_table *synct;
2223 unsigned char get_period = data->msginbuf[3];
2224 unsigned char get_offset = data->msginbuf[4];
2225 int entry;
2226 int syncnum;
2227
2228 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "enter");
2229
2230 synct = data->synct;
2231 syncnum = data->syncnum;
2232
2233 /*
2234 * If this inititor sent the SDTR message, then target responds SDTR,
2235 * initiator SYNCREG, ACKWIDTH from SDTR parameter.
2236 * Messages are not appropriate, then send back reject message.
2237 * If initiator did not send the SDTR, but target sends SDTR,
2238 * initiator calculator the appropriate parameter and send back SDTR.
2239 */
2240 if (target->sync_flag & SDTR_INITIATOR) {
2241 /*
2242 * Initiator sent SDTR, the target responds and
2243 * send back negotiation SDTR.
2244 */
2245 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target responds SDTR");
2246
2247 target->sync_flag &= ~SDTR_INITIATOR;
2248 target->sync_flag |= SDTR_DONE;
2249
2250 /*
2251 * offset:
2252 */
2253 if (get_offset > SYNC_OFFSET) {
2254 /*
2255 * Negotiation is failed, the target send back
2256 * unexpected offset value.
2257 */
2258 goto reject;
2259 }
2260
2261 if (get_offset == ASYNC_OFFSET) {
2262 /*
2263 * Negotiation is succeeded, the target want
2264 * to fall back into asynchronous transfer mode.
2265 */
2266 goto async;
2267 }
2268
2269 /*
2270 * period:
2271 * Check whether sync period is too short. If too short,
2272 * fall back to async mode. If it's ok, then investigate
2273 * the received sync period. If sync period is acceptable
2274 * between sync table start_period and end_period, then
2275 * set this I_T nexus as sent offset and period.
2276 * If it's not acceptable, send back reject and fall back
2277 * to async mode.
2278 */
2279 if (get_period < data->synct[0].period_num) {
2280 /*
2281 * Negotiation is failed, the target send back
2282 * unexpected period value.
2283 */
2284 goto reject;
2285 }
2286
2287 entry = nsp32_search_period_entry(data, target, get_period);
2288
2289 if (entry < 0) {
2290 /*
2291 * Target want to use long period which is not
2292 * acceptable NinjaSCSI-32Bi/UDE.
2293 */
2294 goto reject;
2295 }
2296
2297 /*
2298 * Set new sync table and offset in this I_T nexus.
2299 */
2300 nsp32_set_sync_entry(data, target, entry, get_offset);
2301 } else {
2302 /* Target send SDTR to initiator. */
2303 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target send SDTR");
2304
2305 target->sync_flag |= SDTR_INITIATOR;
2306
2307 /* offset: */
2308 if (get_offset > SYNC_OFFSET) {
2309 /* send back as SYNC_OFFSET */
2310 get_offset = SYNC_OFFSET;
2311 }
2312
2313 /* period: */
2314 if (get_period < data->synct[0].period_num) {
2315 get_period = data->synct[0].period_num;
2316 }
2317
2318 entry = nsp32_search_period_entry(data, target, get_period);
2319
2320 if (get_offset == ASYNC_OFFSET || entry < 0) {
2321 nsp32_set_async(data, target);
2322 nsp32_build_sdtr(SCpnt, 0, ASYNC_OFFSET);
2323 } else {
2324 nsp32_set_sync_entry(data, target, entry, get_offset);
2325 nsp32_build_sdtr(SCpnt, get_period, get_offset);
2326 }
2327 }
2328
2329 target->period = get_period;
2330 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit");
2331 return;
2332
2333 reject:
2334 /*
2335 * If the current message is unacceptable, send back to the target
2336 * with reject message.
2337 */
2338 nsp32_build_reject(SCpnt);
2339
2340 async:
2341 nsp32_set_async(data, target); /* set as ASYNC transfer mode */
2342
2343 target->period = 0;
2344 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit: set async");
2345 return;
2346}
2347
2348
2349/*
2350 * Search config entry number matched in sync_table from given
2351 * target and speed period value. If failed to search, return negative value.
2352 */
2353static int nsp32_search_period_entry(nsp32_hw_data *data,
2354 nsp32_target *target,
2355 unsigned char period)
2356{
2357 int i;
2358
2359 if (target->limit_entry >= data->syncnum) {
2360 nsp32_msg(KERN_ERR, "limit_entry exceeds syncnum!");
2361 target->limit_entry = 0;
2362 }
2363
2364 for (i = target->limit_entry; i < data->syncnum; i++) {
2365 if (period >= data->synct[i].start_period &&
2366 period <= data->synct[i].end_period) {
2367 break;
2368 }
2369 }
2370
2371 /*
2372 * Check given period value is over the sync_table value.
2373 * If so, return max value.
2374 */
2375 if (i == data->syncnum) {
2376 i = -1;
2377 }
2378
2379 return i;
2380}
2381
2382
2383/*
2384 * target <-> initiator use ASYNC transfer
2385 */
2386static void nsp32_set_async(nsp32_hw_data *data, nsp32_target *target)
2387{
2388 unsigned char period = data->synct[target->limit_entry].period_num;
2389
2390 target->offset = ASYNC_OFFSET;
2391 target->period = 0;
2392 target->syncreg = TO_SYNCREG(period, ASYNC_OFFSET);
2393 target->ackwidth = 0;
2394 target->sample_reg = 0;
2395
2396 nsp32_dbg(NSP32_DEBUG_SYNC, "set async");
2397}
2398
2399
2400/*
2401 * target <-> initiator use maximum SYNC transfer
2402 */
2403static void nsp32_set_max_sync(nsp32_hw_data *data,
2404 nsp32_target *target,
2405 unsigned char *period,
2406 unsigned char *offset)
2407{
2408 unsigned char period_num, ackwidth;
2409
2410 period_num = data->synct[target->limit_entry].period_num;
2411 *period = data->synct[target->limit_entry].start_period;
2412 ackwidth = data->synct[target->limit_entry].ackwidth;
2413 *offset = SYNC_OFFSET;
2414
2415 target->syncreg = TO_SYNCREG(period_num, *offset);
2416 target->ackwidth = ackwidth;
2417 target->offset = *offset;
2418 target->sample_reg = 0; /* disable SREQ sampling */
2419}
2420
2421
2422/*
2423 * target <-> initiator use entry number speed
2424 */
2425static void nsp32_set_sync_entry(nsp32_hw_data *data,
2426 nsp32_target *target,
2427 int entry,
2428 unsigned char offset)
2429{
2430 unsigned char period, ackwidth, sample_rate;
2431
2432 period = data->synct[entry].period_num;
2433 ackwidth = data->synct[entry].ackwidth;
2434 sample_rate = data->synct[entry].sample_rate;
2435
2436 target->syncreg = TO_SYNCREG(period, offset);
2437 target->ackwidth = ackwidth;
2438 target->offset = offset;
2439 target->sample_reg = sample_rate | SAMPLING_ENABLE;
2440
2441 nsp32_dbg(NSP32_DEBUG_SYNC, "set sync");
2442}
2443
2444
2445/*
2446 * It waits until SCSI REQ becomes assertion or negation state.
2447 *
2448 * Note: If nsp32_msgin_occur is called, we asserts SCSI ACK. Then
2449 * connected target responds SCSI REQ negation. We have to wait
2450 * SCSI REQ becomes negation in order to negate SCSI ACK signal for
2451 * REQ-ACK handshake.
2452 */
2453static void nsp32_wait_req(nsp32_hw_data *data, int state)
2454{
2455 unsigned int base = data->BaseAddress;
2456 int wait_time = 0;
2457 unsigned char bus, req_bit;
2458
2459 if (!((state == ASSERT) || (state == NEGATE))) {
2460 nsp32_msg(KERN_ERR, "unknown state designation");
2461 }
2462 /* REQ is BIT(5) */
2463 req_bit = (state == ASSERT ? BUSMON_REQ : 0);
2464
2465 do {
2466 bus = nsp32_read1(base, SCSI_BUS_MONITOR);
2467 if ((bus & BUSMON_REQ) == req_bit) {
2468 nsp32_dbg(NSP32_DEBUG_WAIT,
2469 "wait_time: %d", wait_time);
2470 return;
2471 }
2472 udelay(1);
2473 wait_time++;
2474 } while (wait_time < REQSACK_TIMEOUT_TIME);
2475
2476 nsp32_msg(KERN_WARNING, "wait REQ timeout, req_bit: 0x%x", req_bit);
2477}
2478
2479/*
2480 * It waits until SCSI SACK becomes assertion or negation state.
2481 */
2482static void nsp32_wait_sack(nsp32_hw_data *data, int state)
2483{
2484 unsigned int base = data->BaseAddress;
2485 int wait_time = 0;
2486 unsigned char bus, ack_bit;
2487
2488 if (!((state == ASSERT) || (state == NEGATE))) {
2489 nsp32_msg(KERN_ERR, "unknown state designation");
2490 }
2491 /* ACK is BIT(4) */
2492 ack_bit = (state == ASSERT ? BUSMON_ACK : 0);
2493
2494 do {
2495 bus = nsp32_read1(base, SCSI_BUS_MONITOR);
2496 if ((bus & BUSMON_ACK) == ack_bit) {
2497 nsp32_dbg(NSP32_DEBUG_WAIT,
2498 "wait_time: %d", wait_time);
2499 return;
2500 }
2501 udelay(1);
2502 wait_time++;
2503 } while (wait_time < REQSACK_TIMEOUT_TIME);
2504
2505 nsp32_msg(KERN_WARNING, "wait SACK timeout, ack_bit: 0x%x", ack_bit);
2506}
2507
2508/*
2509 * assert SCSI ACK
2510 *
2511 * Note: SCSI ACK assertion needs with ACKENB=1, AUTODIRECTION=1.
2512 */
2513static void nsp32_sack_assert(nsp32_hw_data *data)
2514{
2515 unsigned int base = data->BaseAddress;
2516 unsigned char busctrl;
2517
2518 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL);
2519 busctrl |= (BUSCTL_ACK | AUTODIRECTION | ACKENB);
2520 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl);
2521}
2522
2523/*
2524 * negate SCSI ACK
2525 */
2526static void nsp32_sack_negate(nsp32_hw_data *data)
2527{
2528 unsigned int base = data->BaseAddress;
2529 unsigned char busctrl;
2530
2531 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL);
2532 busctrl &= ~BUSCTL_ACK;
2533 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl);
2534}
2535
2536
2537
2538/*
2539 * Note: n_io_port is defined as 0x7f because I/O register port is
2540 * assigned as:
2541 * 0x800-0x8ff: memory mapped I/O port
2542 * 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly)
2543 * 0xc00-0xfff: CardBus status registers
2544 */
2545static int nsp32_detect(struct pci_dev *pdev)
2546{
2547 struct Scsi_Host *host; /* registered host structure */
2548 struct resource *res;
2549 nsp32_hw_data *data;
2550 int ret;
2551 int i, j;
2552
2553 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
2554
2555 /*
2556 * register this HBA as SCSI device
2557 */
2558 host = scsi_host_alloc(&nsp32_template, sizeof(nsp32_hw_data));
2559 if (host == NULL) {
2560 nsp32_msg (KERN_ERR, "failed to scsi register");
2561 goto err;
2562 }
2563
2564 /*
2565 * set nsp32_hw_data
2566 */
2567 data = (nsp32_hw_data *)host->hostdata;
2568
2569 memcpy(data, &nsp32_data_base, sizeof(nsp32_hw_data));
2570
2571 host->irq = data->IrqNumber;
2572 host->io_port = data->BaseAddress;
2573 host->unique_id = data->BaseAddress;
2574 host->n_io_port = data->NumAddress;
2575 host->base = (unsigned long)data->MmioAddress;
2576
2577 data->Host = host;
2578 spin_lock_init(&(data->Lock));
2579
2580 data->cur_lunt = NULL;
2581 data->cur_target = NULL;
2582
2583 /*
2584 * Bus master transfer mode is supported currently.
2585 */
2586 data->trans_method = NSP32_TRANSFER_BUSMASTER;
2587
2588 /*
2589 * Set clock div, CLOCK_4 (HBA has own external clock, and
2590 * dividing * 100ns/4).
2591 * Currently CLOCK_4 has only tested, not for CLOCK_2/PCICLK yet.
2592 */
2593 data->clock = CLOCK_4;
2594
2595 /*
2596 * Select appropriate nsp32_sync_table and set I_CLOCKDIV.
2597 */
2598 switch (data->clock) {
2599 case CLOCK_4:
2600 /* If data->clock is CLOCK_4, then select 40M sync table. */
2601 data->synct = nsp32_sync_table_40M;
2602 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M);
2603 break;
2604 case CLOCK_2:
2605 /* If data->clock is CLOCK_2, then select 20M sync table. */
2606 data->synct = nsp32_sync_table_20M;
2607 data->syncnum = ARRAY_SIZE(nsp32_sync_table_20M);
2608 break;
2609 case PCICLK:
2610 /* If data->clock is PCICLK, then select pci sync table. */
2611 data->synct = nsp32_sync_table_pci;
2612 data->syncnum = ARRAY_SIZE(nsp32_sync_table_pci);
2613 break;
2614 default:
2615 nsp32_msg(KERN_WARNING,
2616 "Invalid clock div is selected, set CLOCK_4.");
2617 /* Use default value CLOCK_4 */
2618 data->clock = CLOCK_4;
2619 data->synct = nsp32_sync_table_40M;
2620 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M);
2621 }
2622
2623 /*
2624 * setup nsp32_lunt
2625 */
2626
2627 /*
2628 * setup DMA
2629 */
2630 if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) != 0) {
2631 nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
2632 goto scsi_unregister;
2633 }
2634
2635 /*
2636 * allocate autoparam DMA resource.
2637 */
2638 data->autoparam = dma_alloc_coherent(&pdev->dev,
2639 sizeof(nsp32_autoparam), &(data->auto_paddr),
2640 GFP_KERNEL);
2641 if (data->autoparam == NULL) {
2642 nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
2643 goto scsi_unregister;
2644 }
2645
2646 /*
2647 * allocate scatter-gather DMA resource.
2648 */
2649 data->sg_list = dma_alloc_coherent(&pdev->dev, NSP32_SG_TABLE_SIZE,
2650 &data->sg_paddr, GFP_KERNEL);
2651 if (data->sg_list == NULL) {
2652 nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
2653 goto free_autoparam;
2654 }
2655
2656 for (i = 0; i < ARRAY_SIZE(data->lunt); i++) {
2657 for (j = 0; j < ARRAY_SIZE(data->lunt[0]); j++) {
2658 int offset = i * ARRAY_SIZE(data->lunt[0]) + j;
2659 nsp32_lunt tmp = {
2660 .SCpnt = NULL,
2661 .save_datp = 0,
2662 .msgin03 = FALSE,
2663 .sg_num = 0,
2664 .cur_entry = 0,
2665 .sglun = &(data->sg_list[offset]),
2666 .sglun_paddr = data->sg_paddr + (offset * sizeof(nsp32_sglun)),
2667 };
2668
2669 data->lunt[i][j] = tmp;
2670 }
2671 }
2672
2673 /*
2674 * setup target
2675 */
2676 for (i = 0; i < ARRAY_SIZE(data->target); i++) {
2677 nsp32_target *target = &(data->target[i]);
2678
2679 target->limit_entry = 0;
2680 target->sync_flag = 0;
2681 nsp32_set_async(data, target);
2682 }
2683
2684 /*
2685 * EEPROM check
2686 */
2687 ret = nsp32_getprom_param(data);
2688 if (ret == FALSE) {
2689 data->resettime = 3; /* default 3 */
2690 }
2691
2692 /*
2693 * setup HBA
2694 */
2695 nsp32hw_init(data);
2696
2697 snprintf(data->info_str, sizeof(data->info_str),
2698 "NinjaSCSI-32Bi/UDE: irq %d, io 0x%lx+0x%x",
2699 host->irq, host->io_port, host->n_io_port);
2700
2701 /*
2702 * SCSI bus reset
2703 *
2704 * Note: It's important to reset SCSI bus in initialization phase.
2705 * NinjaSCSI-32Bi/UDE HBA EEPROM seems to exchange SDTR when
2706 * system is coming up, so SCSI devices connected to HBA is set as
2707 * un-asynchronous mode. It brings the merit that this HBA is
2708 * ready to start synchronous transfer without any preparation,
2709 * but we are difficult to control transfer speed. In addition,
2710 * it prevents device transfer speed from effecting EEPROM start-up
2711 * SDTR. NinjaSCSI-32Bi/UDE has the feature if EEPROM is set as
2712 * Auto Mode, then FAST-10M is selected when SCSI devices are
2713 * connected same or more than 4 devices. It should be avoided
2714 * depending on this specification. Thus, resetting the SCSI bus
2715 * restores all connected SCSI devices to asynchronous mode, then
2716 * this driver set SDTR safely later, and we can control all SCSI
2717 * device transfer mode.
2718 */
2719 nsp32_do_bus_reset(data);
2720
2721 ret = request_irq(host->irq, do_nsp32_isr, IRQF_SHARED, "nsp32", data);
2722 if (ret < 0) {
2723 nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 "
2724 "SCSI PCI controller. Interrupt: %d", host->irq);
2725 goto free_sg_list;
2726 }
2727
2728 /*
2729 * PCI IO register
2730 */
2731 res = request_region(host->io_port, host->n_io_port, "nsp32");
2732 if (res == NULL) {
2733 nsp32_msg(KERN_ERR,
2734 "I/O region 0x%lx+0x%lx is already used",
2735 data->BaseAddress, data->NumAddress);
2736 goto free_irq;
2737 }
2738
2739 ret = scsi_add_host(host, &pdev->dev);
2740 if (ret) {
2741 nsp32_msg(KERN_ERR, "failed to add scsi host");
2742 goto free_region;
2743 }
2744 scsi_scan_host(host);
2745 pci_set_drvdata(pdev, host);
2746 return 0;
2747
2748 free_region:
2749 release_region(host->io_port, host->n_io_port);
2750
2751 free_irq:
2752 free_irq(host->irq, data);
2753
2754 free_sg_list:
2755 dma_free_coherent(&pdev->dev, NSP32_SG_TABLE_SIZE,
2756 data->sg_list, data->sg_paddr);
2757
2758 free_autoparam:
2759 dma_free_coherent(&pdev->dev, sizeof(nsp32_autoparam),
2760 data->autoparam, data->auto_paddr);
2761
2762 scsi_unregister:
2763 scsi_host_put(host);
2764
2765 err:
2766 return 1;
2767}
2768
2769static int nsp32_release(struct Scsi_Host *host)
2770{
2771 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
2772
2773 if (data->autoparam) {
2774 dma_free_coherent(&data->Pci->dev, sizeof(nsp32_autoparam),
2775 data->autoparam, data->auto_paddr);
2776 }
2777
2778 if (data->sg_list) {
2779 dma_free_coherent(&data->Pci->dev, NSP32_SG_TABLE_SIZE,
2780 data->sg_list, data->sg_paddr);
2781 }
2782
2783 if (host->irq) {
2784 free_irq(host->irq, data);
2785 }
2786
2787 if (host->io_port && host->n_io_port) {
2788 release_region(host->io_port, host->n_io_port);
2789 }
2790
2791 if (data->MmioAddress) {
2792 iounmap(data->MmioAddress);
2793 }
2794
2795 return 0;
2796}
2797
2798static const char *nsp32_info(struct Scsi_Host *shpnt)
2799{
2800 nsp32_hw_data *data = (nsp32_hw_data *)shpnt->hostdata;
2801
2802 return data->info_str;
2803}
2804
2805
2806/****************************************************************************
2807 * error handler
2808 */
2809static int nsp32_eh_abort(struct scsi_cmnd *SCpnt)
2810{
2811 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2812 unsigned int base = SCpnt->device->host->io_port;
2813
2814 nsp32_msg(KERN_WARNING, "abort");
2815
2816 if (data->cur_lunt->SCpnt == NULL) {
2817 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort failed");
2818 return FAILED;
2819 }
2820
2821 if (data->cur_target->sync_flag & (SDTR_INITIATOR | SDTR_TARGET)) {
2822 /* reset SDTR negotiation */
2823 data->cur_target->sync_flag = 0;
2824 nsp32_set_async(data, data->cur_target);
2825 }
2826
2827 nsp32_write2(base, TRANSFER_CONTROL, 0);
2828 nsp32_write2(base, BM_CNT, 0);
2829
2830 SCpnt->result = DID_ABORT << 16;
2831 nsp32_scsi_done(SCpnt);
2832
2833 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort success");
2834 return SUCCESS;
2835}
2836
2837static void nsp32_do_bus_reset(nsp32_hw_data *data)
2838{
2839 unsigned int base = data->BaseAddress;
2840 unsigned short intrdat;
2841 int i;
2842
2843 nsp32_dbg(NSP32_DEBUG_BUSRESET, "in");
2844
2845 /*
2846 * stop all transfer
2847 * clear TRANSFERCONTROL_BM_START
2848 * clear counter
2849 */
2850 nsp32_write2(base, TRANSFER_CONTROL, 0);
2851 nsp32_write4(base, BM_CNT, 0);
2852 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
2853
2854 /*
2855 * fall back to asynchronous transfer mode
2856 * initialize SDTR negotiation flag
2857 */
2858 for (i = 0; i < ARRAY_SIZE(data->target); i++) {
2859 nsp32_target *target = &data->target[i];
2860
2861 target->sync_flag = 0;
2862 nsp32_set_async(data, target);
2863 }
2864
2865 /*
2866 * reset SCSI bus
2867 */
2868 nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
2869 mdelay(RESET_HOLD_TIME / 1000);
2870 nsp32_write1(base, SCSI_BUS_CONTROL, 0);
2871 for(i = 0; i < 5; i++) {
2872 intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
2873 nsp32_dbg(NSP32_DEBUG_BUSRESET, "irq:1: 0x%x", intrdat);
2874 }
2875
2876 data->CurrentSC = NULL;
2877}
2878
2879static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt)
2880{
2881 struct Scsi_Host *host = SCpnt->device->host;
2882 unsigned int base = SCpnt->device->host->io_port;
2883 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
2884
2885 nsp32_msg(KERN_INFO, "Host Reset");
2886 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
2887
2888 spin_lock_irq(SCpnt->device->host->host_lock);
2889
2890 nsp32hw_init(data);
2891 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
2892 nsp32_do_bus_reset(data);
2893 nsp32_write2(base, IRQ_CONTROL, 0);
2894
2895 spin_unlock_irq(SCpnt->device->host->host_lock);
2896 return SUCCESS; /* Host reset is succeeded at any time. */
2897}
2898
2899
2900/**************************************************************************
2901 * EEPROM handler
2902 */
2903
2904/*
2905 * getting EEPROM parameter
2906 */
2907static int nsp32_getprom_param(nsp32_hw_data *data)
2908{
2909 int vendor = data->pci_devid->vendor;
2910 int device = data->pci_devid->device;
2911 int ret, val, i;
2912
2913 /*
2914 * EEPROM checking.
2915 */
2916 ret = nsp32_prom_read(data, 0x7e);
2917 if (ret != 0x55) {
2918 nsp32_msg(KERN_INFO, "No EEPROM detected: 0x%x", ret);
2919 return FALSE;
2920 }
2921 ret = nsp32_prom_read(data, 0x7f);
2922 if (ret != 0xaa) {
2923 nsp32_msg(KERN_INFO, "Invalid number: 0x%x", ret);
2924 return FALSE;
2925 }
2926
2927 /*
2928 * check EEPROM type
2929 */
2930 if (vendor == PCI_VENDOR_ID_WORKBIT &&
2931 device == PCI_DEVICE_ID_WORKBIT_STANDARD) {
2932 ret = nsp32_getprom_c16(data);
2933 } else if (vendor == PCI_VENDOR_ID_WORKBIT &&
2934 device == PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC) {
2935 ret = nsp32_getprom_at24(data);
2936 } else if (vendor == PCI_VENDOR_ID_WORKBIT &&
2937 device == PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO ) {
2938 ret = nsp32_getprom_at24(data);
2939 } else {
2940 nsp32_msg(KERN_WARNING, "Unknown EEPROM");
2941 ret = FALSE;
2942 }
2943
2944 /* for debug : SPROM data full checking */
2945 for (i = 0; i <= 0x1f; i++) {
2946 val = nsp32_prom_read(data, i);
2947 nsp32_dbg(NSP32_DEBUG_EEPROM,
2948 "rom address 0x%x : 0x%x", i, val);
2949 }
2950
2951 return ret;
2952}
2953
2954
2955/*
2956 * AT24C01A (Logitec: LHA-600S), AT24C02 (Melco Buffalo: IFC-USLP) data map:
2957 *
2958 * ROMADDR
2959 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
2960 * Value 0x0: ASYNC, 0x0c: Ultra-20M, 0x19: Fast-10M
2961 * 0x07 : HBA Synchronous Transfer Period
2962 * Value 0: AutoSync, 1: Manual Setting
2963 * 0x08 - 0x0f : Not Used? (0x0)
2964 * 0x10 : Bus Termination
2965 * Value 0: Auto[ON], 1: ON, 2: OFF
2966 * 0x11 : Not Used? (0)
2967 * 0x12 : Bus Reset Delay Time (0x03)
2968 * 0x13 : Bootable CD Support
2969 * Value 0: Disable, 1: Enable
2970 * 0x14 : Device Scan
2971 * Bit 7 6 5 4 3 2 1 0
2972 * | <----------------->
2973 * | SCSI ID: Value 0: Skip, 1: YES
2974 * |-> Value 0: ALL scan, Value 1: Manual
2975 * 0x15 - 0x1b : Not Used? (0)
2976 * 0x1c : Constant? (0x01) (clock div?)
2977 * 0x1d - 0x7c : Not Used (0xff)
2978 * 0x7d : Not Used? (0xff)
2979 * 0x7e : Constant (0x55), Validity signature
2980 * 0x7f : Constant (0xaa), Validity signature
2981 */
2982static int nsp32_getprom_at24(nsp32_hw_data *data)
2983{
2984 int ret, i;
2985 int auto_sync;
2986 nsp32_target *target;
2987 int entry;
2988
2989 /*
2990 * Reset time which is designated by EEPROM.
2991 *
2992 * TODO: Not used yet.
2993 */
2994 data->resettime = nsp32_prom_read(data, 0x12);
2995
2996 /*
2997 * HBA Synchronous Transfer Period
2998 *
2999 * Note: auto_sync = 0: auto, 1: manual. Ninja SCSI HBA spec says
3000 * that if auto_sync is 0 (auto), and connected SCSI devices are
3001 * same or lower than 3, then transfer speed is set as ULTRA-20M.
3002 * On the contrary if connected SCSI devices are same or higher
3003 * than 4, then transfer speed is set as FAST-10M.
3004 *
3005 * I break this rule. The number of connected SCSI devices are
3006 * only ignored. If auto_sync is 0 (auto), then transfer speed is
3007 * forced as ULTRA-20M.
3008 */
3009 ret = nsp32_prom_read(data, 0x07);
3010 switch (ret) {
3011 case 0:
3012 auto_sync = TRUE;
3013 break;
3014 case 1:
3015 auto_sync = FALSE;
3016 break;
3017 default:
3018 nsp32_msg(KERN_WARNING,
3019 "Unsupported Auto Sync mode. Fall back to manual mode.");
3020 auto_sync = TRUE;
3021 }
3022
3023 if (trans_mode == ULTRA20M_MODE) {
3024 auto_sync = TRUE;
3025 }
3026
3027 /*
3028 * each device Synchronous Transfer Period
3029 */
3030 for (i = 0; i < NSP32_HOST_SCSIID; i++) {
3031 target = &data->target[i];
3032 if (auto_sync == TRUE) {
3033 target->limit_entry = 0; /* set as ULTRA20M */
3034 } else {
3035 ret = nsp32_prom_read(data, i);
3036 entry = nsp32_search_period_entry(data, target, ret);
3037 if (entry < 0) {
3038 /* search failed... set maximum speed */
3039 entry = 0;
3040 }
3041 target->limit_entry = entry;
3042 }
3043 }
3044
3045 return TRUE;
3046}
3047
3048
3049/*
3050 * C16 110 (I-O Data: SC-NBD) data map:
3051 *
3052 * ROMADDR
3053 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
3054 * Value 0x0: 20MB/S, 0x1: 10MB/S, 0x2: 5MB/S, 0x3: ASYNC
3055 * 0x07 : 0 (HBA Synchronous Transfer Period: Auto Sync)
3056 * 0x08 - 0x0f : Not Used? (0x0)
3057 * 0x10 : Transfer Mode
3058 * Value 0: PIO, 1: Busmater
3059 * 0x11 : Bus Reset Delay Time (0x00-0x20)
3060 * 0x12 : Bus Termination
3061 * Value 0: Disable, 1: Enable
3062 * 0x13 - 0x19 : Disconnection
3063 * Value 0: Disable, 1: Enable
3064 * 0x1a - 0x7c : Not Used? (0)
3065 * 0x7d : Not Used? (0xf8)
3066 * 0x7e : Constant (0x55), Validity signature
3067 * 0x7f : Constant (0xaa), Validity signature
3068 */
3069static int nsp32_getprom_c16(nsp32_hw_data *data)
3070{
3071 int ret, i;
3072 nsp32_target *target;
3073 int entry, val;
3074
3075 /*
3076 * Reset time which is designated by EEPROM.
3077 *
3078 * TODO: Not used yet.
3079 */
3080 data->resettime = nsp32_prom_read(data, 0x11);
3081
3082 /*
3083 * each device Synchronous Transfer Period
3084 */
3085 for (i = 0; i < NSP32_HOST_SCSIID; i++) {
3086 target = &data->target[i];
3087 ret = nsp32_prom_read(data, i);
3088 switch (ret) {
3089 case 0: /* 20MB/s */
3090 val = 0x0c;
3091 break;
3092 case 1: /* 10MB/s */
3093 val = 0x19;
3094 break;
3095 case 2: /* 5MB/s */
3096 val = 0x32;
3097 break;
3098 case 3: /* ASYNC */
3099 val = 0x00;
3100 break;
3101 default: /* default 20MB/s */
3102 val = 0x0c;
3103 break;
3104 }
3105 entry = nsp32_search_period_entry(data, target, val);
3106 if (entry < 0 || trans_mode == ULTRA20M_MODE) {
3107 /* search failed... set maximum speed */
3108 entry = 0;
3109 }
3110 target->limit_entry = entry;
3111 }
3112
3113 return TRUE;
3114}
3115
3116
3117/*
3118 * Atmel AT24C01A (drived in 5V) serial EEPROM routines
3119 */
3120static int nsp32_prom_read(nsp32_hw_data *data, int romaddr)
3121{
3122 int i, val;
3123
3124 /* start condition */
3125 nsp32_prom_start(data);
3126
3127 /* device address */
3128 nsp32_prom_write_bit(data, 1); /* 1 */
3129 nsp32_prom_write_bit(data, 0); /* 0 */
3130 nsp32_prom_write_bit(data, 1); /* 1 */
3131 nsp32_prom_write_bit(data, 0); /* 0 */
3132 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */
3133 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */
3134 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */
3135
3136 /* R/W: W for dummy write */
3137 nsp32_prom_write_bit(data, 0);
3138
3139 /* ack */
3140 nsp32_prom_write_bit(data, 0);
3141
3142 /* word address */
3143 for (i = 7; i >= 0; i--) {
3144 nsp32_prom_write_bit(data, ((romaddr >> i) & 1));
3145 }
3146
3147 /* ack */
3148 nsp32_prom_write_bit(data, 0);
3149
3150 /* start condition */
3151 nsp32_prom_start(data);
3152
3153 /* device address */
3154 nsp32_prom_write_bit(data, 1); /* 1 */
3155 nsp32_prom_write_bit(data, 0); /* 0 */
3156 nsp32_prom_write_bit(data, 1); /* 1 */
3157 nsp32_prom_write_bit(data, 0); /* 0 */
3158 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */
3159 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */
3160 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */
3161
3162 /* R/W: R */
3163 nsp32_prom_write_bit(data, 1);
3164
3165 /* ack */
3166 nsp32_prom_write_bit(data, 0);
3167
3168 /* data... */
3169 val = 0;
3170 for (i = 7; i >= 0; i--) {
3171 val += (nsp32_prom_read_bit(data) << i);
3172 }
3173
3174 /* no ack */
3175 nsp32_prom_write_bit(data, 1);
3176
3177 /* stop condition */
3178 nsp32_prom_stop(data);
3179
3180 return val;
3181}
3182
3183static void nsp32_prom_set(nsp32_hw_data *data, int bit, int val)
3184{
3185 int base = data->BaseAddress;
3186 int tmp;
3187
3188 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL);
3189
3190 if (val == 0) {
3191 tmp &= ~bit;
3192 } else {
3193 tmp |= bit;
3194 }
3195
3196 nsp32_index_write1(base, SERIAL_ROM_CTL, tmp);
3197
3198 udelay(10);
3199}
3200
3201static int nsp32_prom_get(nsp32_hw_data *data, int bit)
3202{
3203 int base = data->BaseAddress;
3204 int tmp, ret;
3205
3206 if (bit != SDA) {
3207 nsp32_msg(KERN_ERR, "return value is not appropriate");
3208 return 0;
3209 }
3210
3211
3212 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL) & bit;
3213
3214 if (tmp == 0) {
3215 ret = 0;
3216 } else {
3217 ret = 1;
3218 }
3219
3220 udelay(10);
3221
3222 return ret;
3223}
3224
3225static void nsp32_prom_start (nsp32_hw_data *data)
3226{
3227 /* start condition */
3228 nsp32_prom_set(data, SCL, 1);
3229 nsp32_prom_set(data, SDA, 1);
3230 nsp32_prom_set(data, ENA, 1); /* output mode */
3231 nsp32_prom_set(data, SDA, 0); /* keeping SCL=1 and transiting
3232 * SDA 1->0 is start condition */
3233 nsp32_prom_set(data, SCL, 0);
3234}
3235
3236static void nsp32_prom_stop (nsp32_hw_data *data)
3237{
3238 /* stop condition */
3239 nsp32_prom_set(data, SCL, 1);
3240 nsp32_prom_set(data, SDA, 0);
3241 nsp32_prom_set(data, ENA, 1); /* output mode */
3242 nsp32_prom_set(data, SDA, 1);
3243 nsp32_prom_set(data, SCL, 0);
3244}
3245
3246static void nsp32_prom_write_bit(nsp32_hw_data *data, int val)
3247{
3248 /* write */
3249 nsp32_prom_set(data, SDA, val);
3250 nsp32_prom_set(data, SCL, 1 );
3251 nsp32_prom_set(data, SCL, 0 );
3252}
3253
3254static int nsp32_prom_read_bit(nsp32_hw_data *data)
3255{
3256 int val;
3257
3258 /* read */
3259 nsp32_prom_set(data, ENA, 0); /* input mode */
3260 nsp32_prom_set(data, SCL, 1);
3261
3262 val = nsp32_prom_get(data, SDA);
3263
3264 nsp32_prom_set(data, SCL, 0);
3265 nsp32_prom_set(data, ENA, 1); /* output mode */
3266
3267 return val;
3268}
3269
3270
3271/**************************************************************************
3272 * Power Management
3273 */
3274#ifdef CONFIG_PM
3275
3276/* Device suspended */
3277static int nsp32_suspend(struct pci_dev *pdev, pm_message_t state)
3278{
3279 struct Scsi_Host *host = pci_get_drvdata(pdev);
3280
3281 nsp32_msg(KERN_INFO, "pci-suspend: pdev=0x%p, state=%ld, slot=%s, host=0x%p", pdev, state, pci_name(pdev), host);
3282
3283 pci_save_state (pdev);
3284 pci_disable_device (pdev);
3285 pci_set_power_state(pdev, pci_choose_state(pdev, state));
3286
3287 return 0;
3288}
3289
3290/* Device woken up */
3291static int nsp32_resume(struct pci_dev *pdev)
3292{
3293 struct Scsi_Host *host = pci_get_drvdata(pdev);
3294 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
3295 unsigned short reg;
3296
3297 nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p", pdev, pci_name(pdev), host);
3298
3299 pci_set_power_state(pdev, PCI_D0);
3300 pci_enable_wake (pdev, PCI_D0, 0);
3301 pci_restore_state (pdev);
3302
3303 reg = nsp32_read2(data->BaseAddress, INDEX_REG);
3304
3305 nsp32_msg(KERN_INFO, "io=0x%x reg=0x%x", data->BaseAddress, reg);
3306
3307 if (reg == 0xffff) {
3308 nsp32_msg(KERN_INFO, "missing device. abort resume.");
3309 return 0;
3310 }
3311
3312 nsp32hw_init (data);
3313 nsp32_do_bus_reset(data);
3314
3315 nsp32_msg(KERN_INFO, "resume success");
3316
3317 return 0;
3318}
3319
3320#endif
3321
3322/************************************************************************
3323 * PCI/Cardbus probe/remove routine
3324 */
3325static int nsp32_probe(struct pci_dev *pdev, const struct pci_device_id *id)
3326{
3327 int ret;
3328 nsp32_hw_data *data = &nsp32_data_base;
3329
3330 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
3331
3332 ret = pci_enable_device(pdev);
3333 if (ret) {
3334 nsp32_msg(KERN_ERR, "failed to enable pci device");
3335 return ret;
3336 }
3337
3338 data->Pci = pdev;
3339 data->pci_devid = id;
3340 data->IrqNumber = pdev->irq;
3341 data->BaseAddress = pci_resource_start(pdev, 0);
3342 data->NumAddress = pci_resource_len (pdev, 0);
3343 data->MmioAddress = pci_ioremap_bar(pdev, 1);
3344 data->MmioLength = pci_resource_len (pdev, 1);
3345
3346 pci_set_master(pdev);
3347
3348 ret = nsp32_detect(pdev);
3349
3350 nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s",
3351 pdev->irq,
3352 data->MmioAddress, data->MmioLength,
3353 pci_name(pdev),
3354 nsp32_model[id->driver_data]);
3355
3356 nsp32_dbg(NSP32_DEBUG_REGISTER, "exit %d", ret);
3357
3358 return ret;
3359}
3360
3361static void nsp32_remove(struct pci_dev *pdev)
3362{
3363 struct Scsi_Host *host = pci_get_drvdata(pdev);
3364
3365 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
3366
3367 scsi_remove_host(host);
3368
3369 nsp32_release(host);
3370
3371 scsi_host_put(host);
3372}
3373
3374static struct pci_driver nsp32_driver = {
3375 .name = "nsp32",
3376 .id_table = nsp32_pci_table,
3377 .probe = nsp32_probe,
3378 .remove = nsp32_remove,
3379#ifdef CONFIG_PM
3380 .suspend = nsp32_suspend,
3381 .resume = nsp32_resume,
3382#endif
3383};
3384
3385/*********************************************************************
3386 * Moule entry point
3387 */
3388static int __init init_nsp32(void) {
3389 nsp32_msg(KERN_INFO, "loading...");
3390 return pci_register_driver(&nsp32_driver);
3391}
3392
3393static void __exit exit_nsp32(void) {
3394 nsp32_msg(KERN_INFO, "unloading...");
3395 pci_unregister_driver(&nsp32_driver);
3396}
3397
3398module_init(init_nsp32);
3399module_exit(exit_nsp32);
3400
3401/* end */