Loading...
1/*
2 * NinjaSCSI-32Bi Cardbus, NinjaSCSI-32UDE PCI/CardBus SCSI driver
3 * Copyright (C) 2001, 2002, 2003
4 * YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
5 * GOTO Masanori <gotom@debian.or.jp>, <gotom@debian.org>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2, or (at your option)
10 * any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 *
18 * Revision History:
19 * 1.0: Initial Release.
20 * 1.1: Add /proc SDTR status.
21 * Remove obsolete error handler nsp32_reset.
22 * Some clean up.
23 * 1.2: PowerPC (big endian) support.
24 */
25
26#include <linux/module.h>
27#include <linux/init.h>
28#include <linux/kernel.h>
29#include <linux/string.h>
30#include <linux/timer.h>
31#include <linux/ioport.h>
32#include <linux/major.h>
33#include <linux/blkdev.h>
34#include <linux/interrupt.h>
35#include <linux/pci.h>
36#include <linux/delay.h>
37#include <linux/ctype.h>
38#include <linux/dma-mapping.h>
39
40#include <asm/dma.h>
41#include <asm/system.h>
42#include <asm/io.h>
43
44#include <scsi/scsi.h>
45#include <scsi/scsi_cmnd.h>
46#include <scsi/scsi_device.h>
47#include <scsi/scsi_host.h>
48#include <scsi/scsi_ioctl.h>
49
50#include "nsp32.h"
51
52
53/***********************************************************************
54 * Module parameters
55 */
56static int trans_mode = 0; /* default: BIOS */
57module_param (trans_mode, int, 0);
58MODULE_PARM_DESC(trans_mode, "transfer mode (0: BIOS(default) 1: Async 2: Ultra20M");
59#define ASYNC_MODE 1
60#define ULTRA20M_MODE 2
61
62static int auto_param = 0; /* default: ON */
63module_param (auto_param, bool, 0);
64MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)");
65
66static int disc_priv = 1; /* default: OFF */
67module_param (disc_priv, bool, 0);
68MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))");
69
70MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>, GOTO Masanori <gotom@debian.or.jp>");
71MODULE_DESCRIPTION("Workbit NinjaSCSI-32Bi/UDE CardBus/PCI SCSI host bus adapter module");
72MODULE_LICENSE("GPL");
73
74static const char *nsp32_release_version = "1.2";
75
76
77/****************************************************************************
78 * Supported hardware
79 */
80static struct pci_device_id nsp32_pci_table[] __devinitdata = {
81 {
82 .vendor = PCI_VENDOR_ID_IODATA,
83 .device = PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II,
84 .subvendor = PCI_ANY_ID,
85 .subdevice = PCI_ANY_ID,
86 .driver_data = MODEL_IODATA,
87 },
88 {
89 .vendor = PCI_VENDOR_ID_WORKBIT,
90 .device = PCI_DEVICE_ID_NINJASCSI_32BI_KME,
91 .subvendor = PCI_ANY_ID,
92 .subdevice = PCI_ANY_ID,
93 .driver_data = MODEL_KME,
94 },
95 {
96 .vendor = PCI_VENDOR_ID_WORKBIT,
97 .device = PCI_DEVICE_ID_NINJASCSI_32BI_WBT,
98 .subvendor = PCI_ANY_ID,
99 .subdevice = PCI_ANY_ID,
100 .driver_data = MODEL_WORKBIT,
101 },
102 {
103 .vendor = PCI_VENDOR_ID_WORKBIT,
104 .device = PCI_DEVICE_ID_WORKBIT_STANDARD,
105 .subvendor = PCI_ANY_ID,
106 .subdevice = PCI_ANY_ID,
107 .driver_data = MODEL_PCI_WORKBIT,
108 },
109 {
110 .vendor = PCI_VENDOR_ID_WORKBIT,
111 .device = PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC,
112 .subvendor = PCI_ANY_ID,
113 .subdevice = PCI_ANY_ID,
114 .driver_data = MODEL_LOGITEC,
115 },
116 {
117 .vendor = PCI_VENDOR_ID_WORKBIT,
118 .device = PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC,
119 .subvendor = PCI_ANY_ID,
120 .subdevice = PCI_ANY_ID,
121 .driver_data = MODEL_PCI_LOGITEC,
122 },
123 {
124 .vendor = PCI_VENDOR_ID_WORKBIT,
125 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO,
126 .subvendor = PCI_ANY_ID,
127 .subdevice = PCI_ANY_ID,
128 .driver_data = MODEL_PCI_MELCO,
129 },
130 {
131 .vendor = PCI_VENDOR_ID_WORKBIT,
132 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II,
133 .subvendor = PCI_ANY_ID,
134 .subdevice = PCI_ANY_ID,
135 .driver_data = MODEL_PCI_MELCO,
136 },
137 {0,0,},
138};
139MODULE_DEVICE_TABLE(pci, nsp32_pci_table);
140
141static nsp32_hw_data nsp32_data_base; /* probe <-> detect glue */
142
143
144/*
145 * Period/AckWidth speed conversion table
146 *
147 * Note: This period/ackwidth speed table must be in descending order.
148 */
149static nsp32_sync_table nsp32_sync_table_40M[] = {
150 /* {PNo, AW, SP, EP, SREQ smpl} Speed(MB/s) Period AckWidth */
151 {0x1, 0, 0x0c, 0x0c, SMPL_40M}, /* 20.0 : 50ns, 25ns */
152 {0x2, 0, 0x0d, 0x18, SMPL_40M}, /* 13.3 : 75ns, 25ns */
153 {0x3, 1, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */
154 {0x4, 1, 0x1a, 0x1f, SMPL_20M}, /* 8.0 : 125ns, 50ns */
155 {0x5, 2, 0x20, 0x25, SMPL_20M}, /* 6.7 : 150ns, 75ns */
156 {0x6, 2, 0x26, 0x31, SMPL_20M}, /* 5.7 : 175ns, 75ns */
157 {0x7, 3, 0x32, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */
158 {0x8, 3, 0x33, 0x38, SMPL_10M}, /* 4.4 : 225ns, 100ns */
159 {0x9, 3, 0x39, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */
160};
161
162static nsp32_sync_table nsp32_sync_table_20M[] = {
163 {0x1, 0, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */
164 {0x2, 0, 0x1a, 0x25, SMPL_20M}, /* 6.7 : 150ns, 50ns */
165 {0x3, 1, 0x26, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */
166 {0x4, 1, 0x33, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */
167 {0x5, 2, 0x3f, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 150ns */
168 {0x6, 2, 0x4c, 0x57, SMPL_10M}, /* 2.8 : 350ns, 150ns */
169 {0x7, 3, 0x58, 0x64, SMPL_10M}, /* 2.5 : 400ns, 200ns */
170 {0x8, 3, 0x65, 0x70, SMPL_10M}, /* 2.2 : 450ns, 200ns */
171 {0x9, 3, 0x71, 0x7d, SMPL_10M}, /* 2.0 : 500ns, 200ns */
172};
173
174static nsp32_sync_table nsp32_sync_table_pci[] = {
175 {0x1, 0, 0x0c, 0x0f, SMPL_40M}, /* 16.6 : 60ns, 30ns */
176 {0x2, 0, 0x10, 0x16, SMPL_40M}, /* 11.1 : 90ns, 30ns */
177 {0x3, 1, 0x17, 0x1e, SMPL_20M}, /* 8.3 : 120ns, 60ns */
178 {0x4, 1, 0x1f, 0x25, SMPL_20M}, /* 6.7 : 150ns, 60ns */
179 {0x5, 2, 0x26, 0x2d, SMPL_20M}, /* 5.6 : 180ns, 90ns */
180 {0x6, 2, 0x2e, 0x34, SMPL_10M}, /* 4.8 : 210ns, 90ns */
181 {0x7, 3, 0x35, 0x3c, SMPL_10M}, /* 4.2 : 240ns, 120ns */
182 {0x8, 3, 0x3d, 0x43, SMPL_10M}, /* 3.7 : 270ns, 120ns */
183 {0x9, 3, 0x44, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 120ns */
184};
185
186/*
187 * function declaration
188 */
189/* module entry point */
190static int __devinit nsp32_probe (struct pci_dev *, const struct pci_device_id *);
191static void __devexit nsp32_remove(struct pci_dev *);
192static int __init init_nsp32 (void);
193static void __exit exit_nsp32 (void);
194
195/* struct struct scsi_host_template */
196static int nsp32_proc_info (struct Scsi_Host *, char *, char **, off_t, int, int);
197
198static int nsp32_detect (struct pci_dev *pdev);
199static int nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
200static const char *nsp32_info (struct Scsi_Host *);
201static int nsp32_release (struct Scsi_Host *);
202
203/* SCSI error handler */
204static int nsp32_eh_abort (struct scsi_cmnd *);
205static int nsp32_eh_bus_reset (struct scsi_cmnd *);
206static int nsp32_eh_host_reset(struct scsi_cmnd *);
207
208/* generate SCSI message */
209static void nsp32_build_identify(struct scsi_cmnd *);
210static void nsp32_build_nop (struct scsi_cmnd *);
211static void nsp32_build_reject (struct scsi_cmnd *);
212static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char, unsigned char);
213
214/* SCSI message handler */
215static int nsp32_busfree_occur(struct scsi_cmnd *, unsigned short);
216static void nsp32_msgout_occur (struct scsi_cmnd *);
217static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long, unsigned short);
218
219static int nsp32_setup_sg_table (struct scsi_cmnd *);
220static int nsp32_selection_autopara(struct scsi_cmnd *);
221static int nsp32_selection_autoscsi(struct scsi_cmnd *);
222static void nsp32_scsi_done (struct scsi_cmnd *);
223static int nsp32_arbitration (struct scsi_cmnd *, unsigned int);
224static int nsp32_reselection (struct scsi_cmnd *, unsigned char);
225static void nsp32_adjust_busfree (struct scsi_cmnd *, unsigned int);
226static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short);
227
228/* SCSI SDTR */
229static void nsp32_analyze_sdtr (struct scsi_cmnd *);
230static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *, unsigned char);
231static void nsp32_set_async (nsp32_hw_data *, nsp32_target *);
232static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *, unsigned char *, unsigned char *);
233static void nsp32_set_sync_entry (nsp32_hw_data *, nsp32_target *, int, unsigned char);
234
235/* SCSI bus status handler */
236static void nsp32_wait_req (nsp32_hw_data *, int);
237static void nsp32_wait_sack (nsp32_hw_data *, int);
238static void nsp32_sack_assert (nsp32_hw_data *);
239static void nsp32_sack_negate (nsp32_hw_data *);
240static void nsp32_do_bus_reset(nsp32_hw_data *);
241
242/* hardware interrupt handler */
243static irqreturn_t do_nsp32_isr(int, void *);
244
245/* initialize hardware */
246static int nsp32hw_init(nsp32_hw_data *);
247
248/* EEPROM handler */
249static int nsp32_getprom_param (nsp32_hw_data *);
250static int nsp32_getprom_at24 (nsp32_hw_data *);
251static int nsp32_getprom_c16 (nsp32_hw_data *);
252static void nsp32_prom_start (nsp32_hw_data *);
253static void nsp32_prom_stop (nsp32_hw_data *);
254static int nsp32_prom_read (nsp32_hw_data *, int);
255static int nsp32_prom_read_bit (nsp32_hw_data *);
256static void nsp32_prom_write_bit(nsp32_hw_data *, int);
257static void nsp32_prom_set (nsp32_hw_data *, int, int);
258static int nsp32_prom_get (nsp32_hw_data *, int);
259
260/* debug/warning/info message */
261static void nsp32_message (const char *, int, char *, char *, ...);
262#ifdef NSP32_DEBUG
263static void nsp32_dmessage(const char *, int, int, char *, ...);
264#endif
265
266/*
267 * max_sectors is currently limited up to 128.
268 */
269static struct scsi_host_template nsp32_template = {
270 .proc_name = "nsp32",
271 .name = "Workbit NinjaSCSI-32Bi/UDE",
272 .proc_info = nsp32_proc_info,
273 .info = nsp32_info,
274 .queuecommand = nsp32_queuecommand,
275 .can_queue = 1,
276 .sg_tablesize = NSP32_SG_SIZE,
277 .max_sectors = 128,
278 .cmd_per_lun = 1,
279 .this_id = NSP32_HOST_SCSIID,
280 .use_clustering = DISABLE_CLUSTERING,
281 .eh_abort_handler = nsp32_eh_abort,
282 .eh_bus_reset_handler = nsp32_eh_bus_reset,
283 .eh_host_reset_handler = nsp32_eh_host_reset,
284/* .highmem_io = 1, */
285};
286
287#include "nsp32_io.h"
288
289/***********************************************************************
290 * debug, error print
291 */
292#ifndef NSP32_DEBUG
293# define NSP32_DEBUG_MASK 0x000000
294# define nsp32_msg(type, args...) nsp32_message ("", 0, (type), args)
295# define nsp32_dbg(mask, args...) /* */
296#else
297# define NSP32_DEBUG_MASK 0xffffff
298# define nsp32_msg(type, args...) \
299 nsp32_message (__func__, __LINE__, (type), args)
300# define nsp32_dbg(mask, args...) \
301 nsp32_dmessage(__func__, __LINE__, (mask), args)
302#endif
303
304#define NSP32_DEBUG_QUEUECOMMAND BIT(0)
305#define NSP32_DEBUG_REGISTER BIT(1)
306#define NSP32_DEBUG_AUTOSCSI BIT(2)
307#define NSP32_DEBUG_INTR BIT(3)
308#define NSP32_DEBUG_SGLIST BIT(4)
309#define NSP32_DEBUG_BUSFREE BIT(5)
310#define NSP32_DEBUG_CDB_CONTENTS BIT(6)
311#define NSP32_DEBUG_RESELECTION BIT(7)
312#define NSP32_DEBUG_MSGINOCCUR BIT(8)
313#define NSP32_DEBUG_EEPROM BIT(9)
314#define NSP32_DEBUG_MSGOUTOCCUR BIT(10)
315#define NSP32_DEBUG_BUSRESET BIT(11)
316#define NSP32_DEBUG_RESTART BIT(12)
317#define NSP32_DEBUG_SYNC BIT(13)
318#define NSP32_DEBUG_WAIT BIT(14)
319#define NSP32_DEBUG_TARGETFLAG BIT(15)
320#define NSP32_DEBUG_PROC BIT(16)
321#define NSP32_DEBUG_INIT BIT(17)
322#define NSP32_SPECIAL_PRINT_REGISTER BIT(20)
323
324#define NSP32_DEBUG_BUF_LEN 100
325
326static void nsp32_message(const char *func, int line, char *type, char *fmt, ...)
327{
328 va_list args;
329 char buf[NSP32_DEBUG_BUF_LEN];
330
331 va_start(args, fmt);
332 vsnprintf(buf, sizeof(buf), fmt, args);
333 va_end(args);
334
335#ifndef NSP32_DEBUG
336 printk("%snsp32: %s\n", type, buf);
337#else
338 printk("%snsp32: %s (%d): %s\n", type, func, line, buf);
339#endif
340}
341
342#ifdef NSP32_DEBUG
343static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...)
344{
345 va_list args;
346 char buf[NSP32_DEBUG_BUF_LEN];
347
348 va_start(args, fmt);
349 vsnprintf(buf, sizeof(buf), fmt, args);
350 va_end(args);
351
352 if (mask & NSP32_DEBUG_MASK) {
353 printk("nsp32-debug: 0x%x %s (%d): %s\n", mask, func, line, buf);
354 }
355}
356#endif
357
358#ifdef NSP32_DEBUG
359# include "nsp32_debug.c"
360#else
361# define show_command(arg) /* */
362# define show_busphase(arg) /* */
363# define show_autophase(arg) /* */
364#endif
365
366/*
367 * IDENTIFY Message
368 */
369static void nsp32_build_identify(struct scsi_cmnd *SCpnt)
370{
371 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
372 int pos = data->msgout_len;
373 int mode = FALSE;
374
375 /* XXX: Auto DiscPriv detection is progressing... */
376 if (disc_priv == 0) {
377 /* mode = TRUE; */
378 }
379
380 data->msgoutbuf[pos] = IDENTIFY(mode, SCpnt->device->lun); pos++;
381
382 data->msgout_len = pos;
383}
384
385/*
386 * SDTR Message Routine
387 */
388static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt,
389 unsigned char period,
390 unsigned char offset)
391{
392 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
393 int pos = data->msgout_len;
394
395 data->msgoutbuf[pos] = EXTENDED_MESSAGE; pos++;
396 data->msgoutbuf[pos] = EXTENDED_SDTR_LEN; pos++;
397 data->msgoutbuf[pos] = EXTENDED_SDTR; pos++;
398 data->msgoutbuf[pos] = period; pos++;
399 data->msgoutbuf[pos] = offset; pos++;
400
401 data->msgout_len = pos;
402}
403
404/*
405 * No Operation Message
406 */
407static void nsp32_build_nop(struct scsi_cmnd *SCpnt)
408{
409 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
410 int pos = data->msgout_len;
411
412 if (pos != 0) {
413 nsp32_msg(KERN_WARNING,
414 "Some messages are already contained!");
415 return;
416 }
417
418 data->msgoutbuf[pos] = NOP; pos++;
419 data->msgout_len = pos;
420}
421
422/*
423 * Reject Message
424 */
425static void nsp32_build_reject(struct scsi_cmnd *SCpnt)
426{
427 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
428 int pos = data->msgout_len;
429
430 data->msgoutbuf[pos] = MESSAGE_REJECT; pos++;
431 data->msgout_len = pos;
432}
433
434/*
435 * timer
436 */
437#if 0
438static void nsp32_start_timer(struct scsi_cmnd *SCpnt, int time)
439{
440 unsigned int base = SCpnt->host->io_port;
441
442 nsp32_dbg(NSP32_DEBUG_INTR, "timer=%d", time);
443
444 if (time & (~TIMER_CNT_MASK)) {
445 nsp32_dbg(NSP32_DEBUG_INTR, "timer set overflow");
446 }
447
448 nsp32_write2(base, TIMER_SET, time & TIMER_CNT_MASK);
449}
450#endif
451
452
453/*
454 * set SCSI command and other parameter to asic, and start selection phase
455 */
456static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
457{
458 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
459 unsigned int base = SCpnt->device->host->io_port;
460 unsigned int host_id = SCpnt->device->host->this_id;
461 unsigned char target = scmd_id(SCpnt);
462 nsp32_autoparam *param = data->autoparam;
463 unsigned char phase;
464 int i, ret;
465 unsigned int msgout;
466 u16_le s;
467
468 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
469
470 /*
471 * check bus free
472 */
473 phase = nsp32_read1(base, SCSI_BUS_MONITOR);
474 if (phase != BUSMON_BUS_FREE) {
475 nsp32_msg(KERN_WARNING, "bus busy");
476 show_busphase(phase & BUSMON_PHASE_MASK);
477 SCpnt->result = DID_BUS_BUSY << 16;
478 return FALSE;
479 }
480
481 /*
482 * message out
483 *
484 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout.
485 * over 3 messages needs another routine.
486 */
487 if (data->msgout_len == 0) {
488 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!");
489 SCpnt->result = DID_ERROR << 16;
490 return FALSE;
491 } else if (data->msgout_len > 0 && data->msgout_len <= 3) {
492 msgout = 0;
493 for (i = 0; i < data->msgout_len; i++) {
494 /*
495 * the sending order of the message is:
496 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2
497 * MCNT 2: MSG#1 -> MSG#2
498 * MCNT 1: MSG#2
499 */
500 msgout >>= 8;
501 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
502 }
503 msgout |= MV_VALID; /* MV valid */
504 msgout |= (unsigned int)data->msgout_len; /* len */
505 } else {
506 /* data->msgout_len > 3 */
507 msgout = 0;
508 }
509
510 // nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", nsp32_read2(base, SEL_TIME_OUT));
511 // nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
512
513 /*
514 * setup asic parameter
515 */
516 memset(param, 0, sizeof(nsp32_autoparam));
517
518 /* cdb */
519 for (i = 0; i < SCpnt->cmd_len; i++) {
520 param->cdb[4 * i] = SCpnt->cmnd[i];
521 }
522
523 /* outgoing messages */
524 param->msgout = cpu_to_le32(msgout);
525
526 /* syncreg, ackwidth, target id, SREQ sampling rate */
527 param->syncreg = data->cur_target->syncreg;
528 param->ackwidth = data->cur_target->ackwidth;
529 param->target_id = BIT(host_id) | BIT(target);
530 param->sample_reg = data->cur_target->sample_reg;
531
532 // nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "sample rate=0x%x\n", data->cur_target->sample_reg);
533
534 /* command control */
535 param->command_control = cpu_to_le16(CLEAR_CDB_FIFO_POINTER |
536 AUTOSCSI_START |
537 AUTO_MSGIN_00_OR_04 |
538 AUTO_MSGIN_02 |
539 AUTO_ATN );
540
541
542 /* transfer control */
543 s = 0;
544 switch (data->trans_method) {
545 case NSP32_TRANSFER_BUSMASTER:
546 s |= BM_START;
547 break;
548 case NSP32_TRANSFER_MMIO:
549 s |= CB_MMIO_MODE;
550 break;
551 case NSP32_TRANSFER_PIO:
552 s |= CB_IO_MODE;
553 break;
554 default:
555 nsp32_msg(KERN_ERR, "unknown trans_method");
556 break;
557 }
558 /*
559 * OR-ed BLIEND_MODE, FIFO intr is decreased, instead of PCI bus waits.
560 * For bus master transfer, it's taken off.
561 */
562 s |= (TRANSFER_GO | ALL_COUNTER_CLR);
563 param->transfer_control = cpu_to_le16(s);
564
565 /* sg table addr */
566 param->sgt_pointer = cpu_to_le32(data->cur_lunt->sglun_paddr);
567
568 /*
569 * transfer parameter to ASIC
570 */
571 nsp32_write4(base, SGT_ADR, data->auto_paddr);
572 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER |
573 AUTO_PARAMETER );
574
575 /*
576 * Check arbitration
577 */
578 ret = nsp32_arbitration(SCpnt, base);
579
580 return ret;
581}
582
583
584/*
585 * Selection with AUTO SCSI (without AUTO PARAMETER)
586 */
587static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
588{
589 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
590 unsigned int base = SCpnt->device->host->io_port;
591 unsigned int host_id = SCpnt->device->host->this_id;
592 unsigned char target = scmd_id(SCpnt);
593 unsigned char phase;
594 int status;
595 unsigned short command = 0;
596 unsigned int msgout = 0;
597 unsigned short execph;
598 int i;
599
600 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
601
602 /*
603 * IRQ disable
604 */
605 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
606
607 /*
608 * check bus line
609 */
610 phase = nsp32_read1(base, SCSI_BUS_MONITOR);
611 if(((phase & BUSMON_BSY) == 1) || (phase & BUSMON_SEL) == 1) {
612 nsp32_msg(KERN_WARNING, "bus busy");
613 SCpnt->result = DID_BUS_BUSY << 16;
614 status = 1;
615 goto out;
616 }
617
618 /*
619 * clear execph
620 */
621 execph = nsp32_read2(base, SCSI_EXECUTE_PHASE);
622
623 /*
624 * clear FIFO counter to set CDBs
625 */
626 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER);
627
628 /*
629 * set CDB0 - CDB15
630 */
631 for (i = 0; i < SCpnt->cmd_len; i++) {
632 nsp32_write1(base, COMMAND_DATA, SCpnt->cmnd[i]);
633 }
634 nsp32_dbg(NSP32_DEBUG_CDB_CONTENTS, "CDB[0]=[0x%x]", SCpnt->cmnd[0]);
635
636 /*
637 * set SCSIOUT LATCH(initiator)/TARGET(target) (OR-ed) ID
638 */
639 nsp32_write1(base, SCSI_OUT_LATCH_TARGET_ID, BIT(host_id) | BIT(target));
640
641 /*
642 * set SCSI MSGOUT REG
643 *
644 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout.
645 * over 3 messages needs another routine.
646 */
647 if (data->msgout_len == 0) {
648 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!");
649 SCpnt->result = DID_ERROR << 16;
650 status = 1;
651 goto out;
652 } else if (data->msgout_len > 0 && data->msgout_len <= 3) {
653 msgout = 0;
654 for (i = 0; i < data->msgout_len; i++) {
655 /*
656 * the sending order of the message is:
657 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2
658 * MCNT 2: MSG#1 -> MSG#2
659 * MCNT 1: MSG#2
660 */
661 msgout >>= 8;
662 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
663 }
664 msgout |= MV_VALID; /* MV valid */
665 msgout |= (unsigned int)data->msgout_len; /* len */
666 nsp32_write4(base, SCSI_MSG_OUT, msgout);
667 } else {
668 /* data->msgout_len > 3 */
669 nsp32_write4(base, SCSI_MSG_OUT, 0);
670 }
671
672 /*
673 * set selection timeout(= 250ms)
674 */
675 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
676
677 /*
678 * set SREQ hazard killer sampling rate
679 *
680 * TODO: sample_rate (BASE+0F) is 0 when internal clock = 40MHz.
681 * check other internal clock!
682 */
683 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg);
684
685 /*
686 * clear Arbit
687 */
688 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR);
689
690 /*
691 * set SYNCREG
692 * Don't set BM_START_ADR before setting this register.
693 */
694 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg);
695
696 /*
697 * set ACKWIDTH
698 */
699 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth);
700
701 nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
702 "syncreg=0x%x, ackwidth=0x%x, sgtpaddr=0x%x, id=0x%x",
703 nsp32_read1(base, SYNC_REG), nsp32_read1(base, ACK_WIDTH),
704 nsp32_read4(base, SGT_ADR), nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID));
705 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "msgout_len=%d, msgout=0x%x",
706 data->msgout_len, msgout);
707
708 /*
709 * set SGT ADDR (physical address)
710 */
711 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr);
712
713 /*
714 * set TRANSFER CONTROL REG
715 */
716 command = 0;
717 command |= (TRANSFER_GO | ALL_COUNTER_CLR);
718 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
719 if (scsi_bufflen(SCpnt) > 0) {
720 command |= BM_START;
721 }
722 } else if (data->trans_method & NSP32_TRANSFER_MMIO) {
723 command |= CB_MMIO_MODE;
724 } else if (data->trans_method & NSP32_TRANSFER_PIO) {
725 command |= CB_IO_MODE;
726 }
727 nsp32_write2(base, TRANSFER_CONTROL, command);
728
729 /*
730 * start AUTO SCSI, kick off arbitration
731 */
732 command = (CLEAR_CDB_FIFO_POINTER |
733 AUTOSCSI_START |
734 AUTO_MSGIN_00_OR_04 |
735 AUTO_MSGIN_02 |
736 AUTO_ATN );
737 nsp32_write2(base, COMMAND_CONTROL, command);
738
739 /*
740 * Check arbitration
741 */
742 status = nsp32_arbitration(SCpnt, base);
743
744 out:
745 /*
746 * IRQ enable
747 */
748 nsp32_write2(base, IRQ_CONTROL, 0);
749
750 return status;
751}
752
753
754/*
755 * Arbitration Status Check
756 *
757 * Note: Arbitration counter is waited during ARBIT_GO is not lifting.
758 * Using udelay(1) consumes CPU time and system time, but
759 * arbitration delay time is defined minimal 2.4us in SCSI
760 * specification, thus udelay works as coarse grained wait timer.
761 */
762static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base)
763{
764 unsigned char arbit;
765 int status = TRUE;
766 int time = 0;
767
768 do {
769 arbit = nsp32_read1(base, ARBIT_STATUS);
770 time++;
771 } while ((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 &&
772 (time <= ARBIT_TIMEOUT_TIME));
773
774 nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
775 "arbit: 0x%x, delay time: %d", arbit, time);
776
777 if (arbit & ARBIT_WIN) {
778 /* Arbitration succeeded */
779 SCpnt->result = DID_OK << 16;
780 nsp32_index_write1(base, EXT_PORT, LED_ON); /* PCI LED on */
781 } else if (arbit & ARBIT_FAIL) {
782 /* Arbitration failed */
783 SCpnt->result = DID_BUS_BUSY << 16;
784 status = FALSE;
785 } else {
786 /*
787 * unknown error or ARBIT_GO timeout,
788 * something lock up! guess no connection.
789 */
790 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "arbit timeout");
791 SCpnt->result = DID_NO_CONNECT << 16;
792 status = FALSE;
793 }
794
795 /*
796 * clear Arbit
797 */
798 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR);
799
800 return status;
801}
802
803
804/*
805 * reselection
806 *
807 * Note: This reselection routine is called from msgin_occur,
808 * reselection target id&lun must be already set.
809 * SCSI-2 says IDENTIFY implies RESTORE_POINTER operation.
810 */
811static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun)
812{
813 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
814 unsigned int host_id = SCpnt->device->host->this_id;
815 unsigned int base = SCpnt->device->host->io_port;
816 unsigned char tmpid, newid;
817
818 nsp32_dbg(NSP32_DEBUG_RESELECTION, "enter");
819
820 /*
821 * calculate reselected SCSI ID
822 */
823 tmpid = nsp32_read1(base, RESELECT_ID);
824 tmpid &= (~BIT(host_id));
825 newid = 0;
826 while (tmpid) {
827 if (tmpid & 1) {
828 break;
829 }
830 tmpid >>= 1;
831 newid++;
832 }
833
834 /*
835 * If reselected New ID:LUN is not existed
836 * or current nexus is not existed, unexpected
837 * reselection is occurred. Send reject message.
838 */
839 if (newid >= ARRAY_SIZE(data->lunt) || newlun >= ARRAY_SIZE(data->lunt[0])) {
840 nsp32_msg(KERN_WARNING, "unknown id/lun");
841 return FALSE;
842 } else if(data->lunt[newid][newlun].SCpnt == NULL) {
843 nsp32_msg(KERN_WARNING, "no SCSI command is processing");
844 return FALSE;
845 }
846
847 data->cur_id = newid;
848 data->cur_lun = newlun;
849 data->cur_target = &(data->target[newid]);
850 data->cur_lunt = &(data->lunt[newid][newlun]);
851
852 /* reset SACK/SavedACK counter (or ALL clear?) */
853 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
854
855 return TRUE;
856}
857
858
859/*
860 * nsp32_setup_sg_table - build scatter gather list for transfer data
861 * with bus master.
862 *
863 * Note: NinjaSCSI-32Bi/UDE bus master can not transfer over 64KB at a time.
864 */
865static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
866{
867 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
868 struct scatterlist *sg;
869 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
870 int num, i;
871 u32_le l;
872
873 if (sgt == NULL) {
874 nsp32_dbg(NSP32_DEBUG_SGLIST, "SGT == null");
875 return FALSE;
876 }
877
878 num = scsi_dma_map(SCpnt);
879 if (!num)
880 return TRUE;
881 else if (num < 0)
882 return FALSE;
883 else {
884 scsi_for_each_sg(SCpnt, sg, num, i) {
885 /*
886 * Build nsp32_sglist, substitute sg dma addresses.
887 */
888 sgt[i].addr = cpu_to_le32(sg_dma_address(sg));
889 sgt[i].len = cpu_to_le32(sg_dma_len(sg));
890
891 if (le32_to_cpu(sgt[i].len) > 0x10000) {
892 nsp32_msg(KERN_ERR,
893 "can't transfer over 64KB at a time, size=0x%lx", le32_to_cpu(sgt[i].len));
894 return FALSE;
895 }
896 nsp32_dbg(NSP32_DEBUG_SGLIST,
897 "num 0x%x : addr 0x%lx len 0x%lx",
898 i,
899 le32_to_cpu(sgt[i].addr),
900 le32_to_cpu(sgt[i].len ));
901 }
902
903 /* set end mark */
904 l = le32_to_cpu(sgt[num-1].len);
905 sgt[num-1].len = cpu_to_le32(l | SGTEND);
906 }
907
908 return TRUE;
909}
910
911static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
912{
913 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
914 nsp32_target *target;
915 nsp32_lunt *cur_lunt;
916 int ret;
917
918 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
919 "enter. target: 0x%x LUN: 0x%x cmnd: 0x%x cmndlen: 0x%x "
920 "use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x",
921 SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len,
922 scsi_sg_count(SCpnt), scsi_sglist(SCpnt), scsi_bufflen(SCpnt));
923
924 if (data->CurrentSC != NULL) {
925 nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request");
926 data->CurrentSC = NULL;
927 SCpnt->result = DID_NO_CONNECT << 16;
928 done(SCpnt);
929 return 0;
930 }
931
932 /* check target ID is not same as this initiator ID */
933 if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
934 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???");
935 SCpnt->result = DID_BAD_TARGET << 16;
936 done(SCpnt);
937 return 0;
938 }
939
940 /* check target LUN is allowable value */
941 if (SCpnt->device->lun >= MAX_LUN) {
942 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "no more lun");
943 SCpnt->result = DID_BAD_TARGET << 16;
944 done(SCpnt);
945 return 0;
946 }
947
948 show_command(SCpnt);
949
950 SCpnt->scsi_done = done;
951 data->CurrentSC = SCpnt;
952 SCpnt->SCp.Status = CHECK_CONDITION;
953 SCpnt->SCp.Message = 0;
954 scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
955
956 SCpnt->SCp.ptr = (char *)scsi_sglist(SCpnt);
957 SCpnt->SCp.this_residual = scsi_bufflen(SCpnt);
958 SCpnt->SCp.buffer = NULL;
959 SCpnt->SCp.buffers_residual = 0;
960
961 /* initialize data */
962 data->msgout_len = 0;
963 data->msgin_len = 0;
964 cur_lunt = &(data->lunt[SCpnt->device->id][SCpnt->device->lun]);
965 cur_lunt->SCpnt = SCpnt;
966 cur_lunt->save_datp = 0;
967 cur_lunt->msgin03 = FALSE;
968 data->cur_lunt = cur_lunt;
969 data->cur_id = SCpnt->device->id;
970 data->cur_lun = SCpnt->device->lun;
971
972 ret = nsp32_setup_sg_table(SCpnt);
973 if (ret == FALSE) {
974 nsp32_msg(KERN_ERR, "SGT fail");
975 SCpnt->result = DID_ERROR << 16;
976 nsp32_scsi_done(SCpnt);
977 return 0;
978 }
979
980 /* Build IDENTIFY */
981 nsp32_build_identify(SCpnt);
982
983 /*
984 * If target is the first time to transfer after the reset
985 * (target don't have SDTR_DONE and SDTR_INITIATOR), sync
986 * message SDTR is needed to do synchronous transfer.
987 */
988 target = &data->target[scmd_id(SCpnt)];
989 data->cur_target = target;
990
991 if (!(target->sync_flag & (SDTR_DONE | SDTR_INITIATOR | SDTR_TARGET))) {
992 unsigned char period, offset;
993
994 if (trans_mode != ASYNC_MODE) {
995 nsp32_set_max_sync(data, target, &period, &offset);
996 nsp32_build_sdtr(SCpnt, period, offset);
997 target->sync_flag |= SDTR_INITIATOR;
998 } else {
999 nsp32_set_async(data, target);
1000 target->sync_flag |= SDTR_DONE;
1001 }
1002
1003 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1004 "SDTR: entry: %d start_period: 0x%x offset: 0x%x\n",
1005 target->limit_entry, period, offset);
1006 } else if (target->sync_flag & SDTR_INITIATOR) {
1007 /*
1008 * It was negotiating SDTR with target, sending from the
1009 * initiator, but there are no chance to remove this flag.
1010 * Set async because we don't get proper negotiation.
1011 */
1012 nsp32_set_async(data, target);
1013 target->sync_flag &= ~SDTR_INITIATOR;
1014 target->sync_flag |= SDTR_DONE;
1015
1016 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1017 "SDTR_INITIATOR: fall back to async");
1018 } else if (target->sync_flag & SDTR_TARGET) {
1019 /*
1020 * It was negotiating SDTR with target, sending from target,
1021 * but there are no chance to remove this flag. Set async
1022 * because we don't get proper negotiation.
1023 */
1024 nsp32_set_async(data, target);
1025 target->sync_flag &= ~SDTR_TARGET;
1026 target->sync_flag |= SDTR_DONE;
1027
1028 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1029 "Unknown SDTR from target is reached, fall back to async.");
1030 }
1031
1032 nsp32_dbg(NSP32_DEBUG_TARGETFLAG,
1033 "target: %d sync_flag: 0x%x syncreg: 0x%x ackwidth: 0x%x",
1034 SCpnt->device->id, target->sync_flag, target->syncreg,
1035 target->ackwidth);
1036
1037 /* Selection */
1038 if (auto_param == 0) {
1039 ret = nsp32_selection_autopara(SCpnt);
1040 } else {
1041 ret = nsp32_selection_autoscsi(SCpnt);
1042 }
1043
1044 if (ret != TRUE) {
1045 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "selection fail");
1046 nsp32_scsi_done(SCpnt);
1047 }
1048
1049 return 0;
1050}
1051
1052static DEF_SCSI_QCMD(nsp32_queuecommand)
1053
1054/* initialize asic */
1055static int nsp32hw_init(nsp32_hw_data *data)
1056{
1057 unsigned int base = data->BaseAddress;
1058 unsigned short irq_stat;
1059 unsigned long lc_reg;
1060 unsigned char power;
1061
1062 lc_reg = nsp32_index_read4(base, CFG_LATE_CACHE);
1063 if ((lc_reg & 0xff00) == 0) {
1064 lc_reg |= (0x20 << 8);
1065 nsp32_index_write2(base, CFG_LATE_CACHE, lc_reg & 0xffff);
1066 }
1067
1068 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
1069 nsp32_write2(base, TRANSFER_CONTROL, 0);
1070 nsp32_write4(base, BM_CNT, 0);
1071 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
1072
1073 do {
1074 irq_stat = nsp32_read2(base, IRQ_STATUS);
1075 nsp32_dbg(NSP32_DEBUG_INIT, "irq_stat 0x%x", irq_stat);
1076 } while (irq_stat & IRQSTATUS_ANY_IRQ);
1077
1078 /*
1079 * Fill FIFO_FULL_SHLD, FIFO_EMPTY_SHLD. Below parameter is
1080 * designated by specification.
1081 */
1082 if ((data->trans_method & NSP32_TRANSFER_PIO) ||
1083 (data->trans_method & NSP32_TRANSFER_MMIO)) {
1084 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x40);
1085 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x40);
1086 } else if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
1087 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x10);
1088 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x60);
1089 } else {
1090 nsp32_dbg(NSP32_DEBUG_INIT, "unknown transfer mode");
1091 }
1092
1093 nsp32_dbg(NSP32_DEBUG_INIT, "full 0x%x emp 0x%x",
1094 nsp32_index_read1(base, FIFO_FULL_SHLD_COUNT),
1095 nsp32_index_read1(base, FIFO_EMPTY_SHLD_COUNT));
1096
1097 nsp32_index_write1(base, CLOCK_DIV, data->clock);
1098 nsp32_index_write1(base, BM_CYCLE, MEMRD_CMD1 | SGT_AUTO_PARA_MEMED_CMD);
1099 nsp32_write1(base, PARITY_CONTROL, 0); /* parity check is disable */
1100
1101 /*
1102 * initialize MISC_WRRD register
1103 *
1104 * Note: Designated parameters is obeyed as following:
1105 * MISC_SCSI_DIRECTION_DETECTOR_SELECT: It must be set.
1106 * MISC_MASTER_TERMINATION_SELECT: It must be set.
1107 * MISC_BMREQ_NEGATE_TIMING_SEL: It should be set.
1108 * MISC_AUTOSEL_TIMING_SEL: It should be set.
1109 * MISC_BMSTOP_CHANGE2_NONDATA_PHASE: It should be set.
1110 * MISC_DELAYED_BMSTART: It's selected for safety.
1111 *
1112 * Note: If MISC_BMSTOP_CHANGE2_NONDATA_PHASE is set, then
1113 * we have to set TRANSFERCONTROL_BM_START as 0 and set
1114 * appropriate value before restarting bus master transfer.
1115 */
1116 nsp32_index_write2(base, MISC_WR,
1117 (SCSI_DIRECTION_DETECTOR_SELECT |
1118 DELAYED_BMSTART |
1119 MASTER_TERMINATION_SELECT |
1120 BMREQ_NEGATE_TIMING_SEL |
1121 AUTOSEL_TIMING_SEL |
1122 BMSTOP_CHANGE2_NONDATA_PHASE));
1123
1124 nsp32_index_write1(base, TERM_PWR_CONTROL, 0);
1125 power = nsp32_index_read1(base, TERM_PWR_CONTROL);
1126 if (!(power & SENSE)) {
1127 nsp32_msg(KERN_INFO, "term power on");
1128 nsp32_index_write1(base, TERM_PWR_CONTROL, BPWR);
1129 }
1130
1131 nsp32_write2(base, TIMER_SET, TIMER_STOP);
1132 nsp32_write2(base, TIMER_SET, TIMER_STOP); /* Required 2 times */
1133
1134 nsp32_write1(base, SYNC_REG, 0);
1135 nsp32_write1(base, ACK_WIDTH, 0);
1136 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
1137
1138 /*
1139 * enable to select designated IRQ (except for
1140 * IRQSELECT_SERR, IRQSELECT_PERR, IRQSELECT_BMCNTERR)
1141 */
1142 nsp32_index_write2(base, IRQ_SELECT, IRQSELECT_TIMER_IRQ |
1143 IRQSELECT_SCSIRESET_IRQ |
1144 IRQSELECT_FIFO_SHLD_IRQ |
1145 IRQSELECT_RESELECT_IRQ |
1146 IRQSELECT_PHASE_CHANGE_IRQ |
1147 IRQSELECT_AUTO_SCSI_SEQ_IRQ |
1148 // IRQSELECT_BMCNTERR_IRQ |
1149 IRQSELECT_TARGET_ABORT_IRQ |
1150 IRQSELECT_MASTER_ABORT_IRQ );
1151 nsp32_write2(base, IRQ_CONTROL, 0);
1152
1153 /* PCI LED off */
1154 nsp32_index_write1(base, EXT_PORT_DDR, LED_OFF);
1155 nsp32_index_write1(base, EXT_PORT, LED_OFF);
1156
1157 return TRUE;
1158}
1159
1160
1161/* interrupt routine */
1162static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
1163{
1164 nsp32_hw_data *data = dev_id;
1165 unsigned int base = data->BaseAddress;
1166 struct scsi_cmnd *SCpnt = data->CurrentSC;
1167 unsigned short auto_stat, irq_stat, trans_stat;
1168 unsigned char busmon, busphase;
1169 unsigned long flags;
1170 int ret;
1171 int handled = 0;
1172 struct Scsi_Host *host = data->Host;
1173
1174 spin_lock_irqsave(host->host_lock, flags);
1175
1176 /*
1177 * IRQ check, then enable IRQ mask
1178 */
1179 irq_stat = nsp32_read2(base, IRQ_STATUS);
1180 nsp32_dbg(NSP32_DEBUG_INTR,
1181 "enter IRQ: %d, IRQstatus: 0x%x", irq, irq_stat);
1182 /* is this interrupt comes from Ninja asic? */
1183 if ((irq_stat & IRQSTATUS_ANY_IRQ) == 0) {
1184 nsp32_dbg(NSP32_DEBUG_INTR, "shared interrupt: irq other 0x%x", irq_stat);
1185 goto out2;
1186 }
1187 handled = 1;
1188 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
1189
1190 busmon = nsp32_read1(base, SCSI_BUS_MONITOR);
1191 busphase = busmon & BUSMON_PHASE_MASK;
1192
1193 trans_stat = nsp32_read2(base, TRANSFER_STATUS);
1194 if ((irq_stat == 0xffff) && (trans_stat == 0xffff)) {
1195 nsp32_msg(KERN_INFO, "card disconnect");
1196 if (data->CurrentSC != NULL) {
1197 nsp32_msg(KERN_INFO, "clean up current SCSI command");
1198 SCpnt->result = DID_BAD_TARGET << 16;
1199 nsp32_scsi_done(SCpnt);
1200 }
1201 goto out;
1202 }
1203
1204 /* Timer IRQ */
1205 if (irq_stat & IRQSTATUS_TIMER_IRQ) {
1206 nsp32_dbg(NSP32_DEBUG_INTR, "timer stop");
1207 nsp32_write2(base, TIMER_SET, TIMER_STOP);
1208 goto out;
1209 }
1210
1211 /* SCSI reset */
1212 if (irq_stat & IRQSTATUS_SCSIRESET_IRQ) {
1213 nsp32_msg(KERN_INFO, "detected someone do bus reset");
1214 nsp32_do_bus_reset(data);
1215 if (SCpnt != NULL) {
1216 SCpnt->result = DID_RESET << 16;
1217 nsp32_scsi_done(SCpnt);
1218 }
1219 goto out;
1220 }
1221
1222 if (SCpnt == NULL) {
1223 nsp32_msg(KERN_WARNING, "SCpnt==NULL this can't be happened");
1224 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1225 goto out;
1226 }
1227
1228 /*
1229 * AutoSCSI Interrupt.
1230 * Note: This interrupt is occurred when AutoSCSI is finished. Then
1231 * check SCSIEXECUTEPHASE, and do appropriate action. Each phases are
1232 * recorded when AutoSCSI sequencer has been processed.
1233 */
1234 if(irq_stat & IRQSTATUS_AUTOSCSI_IRQ) {
1235 /* getting SCSI executed phase */
1236 auto_stat = nsp32_read2(base, SCSI_EXECUTE_PHASE);
1237 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
1238
1239 /* Selection Timeout, go busfree phase. */
1240 if (auto_stat & SELECTION_TIMEOUT) {
1241 nsp32_dbg(NSP32_DEBUG_INTR,
1242 "selection timeout occurred");
1243
1244 SCpnt->result = DID_TIME_OUT << 16;
1245 nsp32_scsi_done(SCpnt);
1246 goto out;
1247 }
1248
1249 if (auto_stat & MSGOUT_PHASE) {
1250 /*
1251 * MsgOut phase was processed.
1252 * If MSG_IN_OCCUER is not set, then MsgOut phase is
1253 * completed. Thus, msgout_len must reset. Otherwise,
1254 * nothing to do here. If MSG_OUT_OCCUER is occurred,
1255 * then we will encounter the condition and check.
1256 */
1257 if (!(auto_stat & MSG_IN_OCCUER) &&
1258 (data->msgout_len <= 3)) {
1259 /*
1260 * !MSG_IN_OCCUER && msgout_len <=3
1261 * ---> AutoSCSI with MSGOUTreg is processed.
1262 */
1263 data->msgout_len = 0;
1264 };
1265
1266 nsp32_dbg(NSP32_DEBUG_INTR, "MsgOut phase processed");
1267 }
1268
1269 if ((auto_stat & DATA_IN_PHASE) &&
1270 (scsi_get_resid(SCpnt) > 0) &&
1271 ((nsp32_read2(base, FIFO_REST_CNT) & FIFO_REST_MASK) != 0)) {
1272 printk( "auto+fifo\n");
1273 //nsp32_pio_read(SCpnt);
1274 }
1275
1276 if (auto_stat & (DATA_IN_PHASE | DATA_OUT_PHASE)) {
1277 /* DATA_IN_PHASE/DATA_OUT_PHASE was processed. */
1278 nsp32_dbg(NSP32_DEBUG_INTR,
1279 "Data in/out phase processed");
1280
1281 /* read BMCNT, SGT pointer addr */
1282 nsp32_dbg(NSP32_DEBUG_INTR, "BMCNT=0x%lx",
1283 nsp32_read4(base, BM_CNT));
1284 nsp32_dbg(NSP32_DEBUG_INTR, "addr=0x%lx",
1285 nsp32_read4(base, SGT_ADR));
1286 nsp32_dbg(NSP32_DEBUG_INTR, "SACK=0x%lx",
1287 nsp32_read4(base, SACK_CNT));
1288 nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx",
1289 nsp32_read4(base, SAVED_SACK_CNT));
1290
1291 scsi_set_resid(SCpnt, 0); /* all data transferred! */
1292 }
1293
1294 /*
1295 * MsgIn Occur
1296 */
1297 if (auto_stat & MSG_IN_OCCUER) {
1298 nsp32_msgin_occur(SCpnt, irq_stat, auto_stat);
1299 }
1300
1301 /*
1302 * MsgOut Occur
1303 */
1304 if (auto_stat & MSG_OUT_OCCUER) {
1305 nsp32_msgout_occur(SCpnt);
1306 }
1307
1308 /*
1309 * Bus Free Occur
1310 */
1311 if (auto_stat & BUS_FREE_OCCUER) {
1312 ret = nsp32_busfree_occur(SCpnt, auto_stat);
1313 if (ret == TRUE) {
1314 goto out;
1315 }
1316 }
1317
1318 if (auto_stat & STATUS_PHASE) {
1319 /*
1320 * Read CSB and substitute CSB for SCpnt->result
1321 * to save status phase stutas byte.
1322 * scsi error handler checks host_byte (DID_*:
1323 * low level driver to indicate status), then checks
1324 * status_byte (SCSI status byte).
1325 */
1326 SCpnt->result = (int)nsp32_read1(base, SCSI_CSB_IN);
1327 }
1328
1329 if (auto_stat & ILLEGAL_PHASE) {
1330 /* Illegal phase is detected. SACK is not back. */
1331 nsp32_msg(KERN_WARNING,
1332 "AUTO SCSI ILLEGAL PHASE OCCUR!!!!");
1333
1334 /* TODO: currently we don't have any action... bus reset? */
1335
1336 /*
1337 * To send back SACK, assert, wait, and negate.
1338 */
1339 nsp32_sack_assert(data);
1340 nsp32_wait_req(data, NEGATE);
1341 nsp32_sack_negate(data);
1342
1343 }
1344
1345 if (auto_stat & COMMAND_PHASE) {
1346 /* nothing to do */
1347 nsp32_dbg(NSP32_DEBUG_INTR, "Command phase processed");
1348 }
1349
1350 if (auto_stat & AUTOSCSI_BUSY) {
1351 /* AutoSCSI is running */
1352 }
1353
1354 show_autophase(auto_stat);
1355 }
1356
1357 /* FIFO_SHLD_IRQ */
1358 if (irq_stat & IRQSTATUS_FIFO_SHLD_IRQ) {
1359 nsp32_dbg(NSP32_DEBUG_INTR, "FIFO IRQ");
1360
1361 switch(busphase) {
1362 case BUSPHASE_DATA_OUT:
1363 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/write");
1364
1365 //nsp32_pio_write(SCpnt);
1366
1367 break;
1368
1369 case BUSPHASE_DATA_IN:
1370 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/read");
1371
1372 //nsp32_pio_read(SCpnt);
1373
1374 break;
1375
1376 case BUSPHASE_STATUS:
1377 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/status");
1378
1379 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1380
1381 break;
1382 default:
1383 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/other phase");
1384 nsp32_dbg(NSP32_DEBUG_INTR, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1385 show_busphase(busphase);
1386 break;
1387 }
1388
1389 goto out;
1390 }
1391
1392 /* Phase Change IRQ */
1393 if (irq_stat & IRQSTATUS_PHASE_CHANGE_IRQ) {
1394 nsp32_dbg(NSP32_DEBUG_INTR, "phase change IRQ");
1395
1396 switch(busphase) {
1397 case BUSPHASE_MESSAGE_IN:
1398 nsp32_dbg(NSP32_DEBUG_INTR, "phase chg/msg in");
1399 nsp32_msgin_occur(SCpnt, irq_stat, 0);
1400 break;
1401 default:
1402 nsp32_msg(KERN_WARNING, "phase chg/other phase?");
1403 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x\n",
1404 irq_stat, trans_stat);
1405 show_busphase(busphase);
1406 break;
1407 }
1408 goto out;
1409 }
1410
1411 /* PCI_IRQ */
1412 if (irq_stat & IRQSTATUS_PCI_IRQ) {
1413 nsp32_dbg(NSP32_DEBUG_INTR, "PCI IRQ occurred");
1414 /* Do nothing */
1415 }
1416
1417 /* BMCNTERR_IRQ */
1418 if (irq_stat & IRQSTATUS_BMCNTERR_IRQ) {
1419 nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
1420 /*
1421 * TODO: To be implemented improving bus master
1422 * transfer reliability when BMCNTERR is occurred in
1423 * AutoSCSI phase described in specification.
1424 */
1425 }
1426
1427#if 0
1428 nsp32_dbg(NSP32_DEBUG_INTR,
1429 "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1430 show_busphase(busphase);
1431#endif
1432
1433 out:
1434 /* disable IRQ mask */
1435 nsp32_write2(base, IRQ_CONTROL, 0);
1436
1437 out2:
1438 spin_unlock_irqrestore(host->host_lock, flags);
1439
1440 nsp32_dbg(NSP32_DEBUG_INTR, "exit");
1441
1442 return IRQ_RETVAL(handled);
1443}
1444
1445#undef SPRINTF
1446#define SPRINTF(args...) \
1447 do { \
1448 if(length > (pos - buffer)) { \
1449 pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \
1450 nsp32_dbg(NSP32_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\
1451 } \
1452 } while(0)
1453
1454static int nsp32_proc_info(struct Scsi_Host *host, char *buffer, char **start,
1455 off_t offset, int length, int inout)
1456{
1457 char *pos = buffer;
1458 int thislength;
1459 unsigned long flags;
1460 nsp32_hw_data *data;
1461 int hostno;
1462 unsigned int base;
1463 unsigned char mode_reg;
1464 int id, speed;
1465 long model;
1466
1467 /* Write is not supported, just return. */
1468 if (inout == TRUE) {
1469 return -EINVAL;
1470 }
1471
1472 hostno = host->host_no;
1473 data = (nsp32_hw_data *)host->hostdata;
1474 base = host->io_port;
1475
1476 SPRINTF("NinjaSCSI-32 status\n\n");
1477 SPRINTF("Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
1478 SPRINTF("SCSI host No.: %d\n", hostno);
1479 SPRINTF("IRQ: %d\n", host->irq);
1480 SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
1481 SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
1482 SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
1483 SPRINTF("Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
1484
1485 mode_reg = nsp32_index_read1(base, CHIP_MODE);
1486 model = data->pci_devid->driver_data;
1487
1488#ifdef CONFIG_PM
1489 SPRINTF("Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
1490#endif
1491 SPRINTF("OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
1492
1493 spin_lock_irqsave(&(data->Lock), flags);
1494 SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
1495 spin_unlock_irqrestore(&(data->Lock), flags);
1496
1497
1498 SPRINTF("SDTR status\n");
1499 for (id = 0; id < ARRAY_SIZE(data->target); id++) {
1500
1501 SPRINTF("id %d: ", id);
1502
1503 if (id == host->this_id) {
1504 SPRINTF("----- NinjaSCSI-32 host adapter\n");
1505 continue;
1506 }
1507
1508 if (data->target[id].sync_flag == SDTR_DONE) {
1509 if (data->target[id].period == 0 &&
1510 data->target[id].offset == ASYNC_OFFSET ) {
1511 SPRINTF("async");
1512 } else {
1513 SPRINTF(" sync");
1514 }
1515 } else {
1516 SPRINTF(" none");
1517 }
1518
1519 if (data->target[id].period != 0) {
1520
1521 speed = 1000000 / (data->target[id].period * 4);
1522
1523 SPRINTF(" transfer %d.%dMB/s, offset %d",
1524 speed / 1000,
1525 speed % 1000,
1526 data->target[id].offset
1527 );
1528 }
1529 SPRINTF("\n");
1530 }
1531
1532
1533 thislength = pos - (buffer + offset);
1534
1535 if(thislength < 0) {
1536 *start = NULL;
1537 return 0;
1538 }
1539
1540
1541 thislength = min(thislength, length);
1542 *start = buffer + offset;
1543
1544 return thislength;
1545}
1546#undef SPRINTF
1547
1548
1549
1550/*
1551 * Reset parameters and call scsi_done for data->cur_lunt.
1552 * Be careful setting SCpnt->result = DID_* before calling this function.
1553 */
1554static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
1555{
1556 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1557 unsigned int base = SCpnt->device->host->io_port;
1558
1559 scsi_dma_unmap(SCpnt);
1560
1561 /*
1562 * clear TRANSFERCONTROL_BM_START
1563 */
1564 nsp32_write2(base, TRANSFER_CONTROL, 0);
1565 nsp32_write4(base, BM_CNT, 0);
1566
1567 /*
1568 * call scsi_done
1569 */
1570 (*SCpnt->scsi_done)(SCpnt);
1571
1572 /*
1573 * reset parameters
1574 */
1575 data->cur_lunt->SCpnt = NULL;
1576 data->cur_lunt = NULL;
1577 data->cur_target = NULL;
1578 data->CurrentSC = NULL;
1579}
1580
1581
1582/*
1583 * Bus Free Occur
1584 *
1585 * Current Phase is BUSFREE. AutoSCSI is automatically execute BUSFREE phase
1586 * with ACK reply when below condition is matched:
1587 * MsgIn 00: Command Complete.
1588 * MsgIn 02: Save Data Pointer.
1589 * MsgIn 04: Diconnect.
1590 * In other case, unexpected BUSFREE is detected.
1591 */
1592static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
1593{
1594 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1595 unsigned int base = SCpnt->device->host->io_port;
1596
1597 nsp32_dbg(NSP32_DEBUG_BUSFREE, "enter execph=0x%x", execph);
1598 show_autophase(execph);
1599
1600 nsp32_write4(base, BM_CNT, 0);
1601 nsp32_write2(base, TRANSFER_CONTROL, 0);
1602
1603 /*
1604 * MsgIn 02: Save Data Pointer
1605 *
1606 * VALID:
1607 * Save Data Pointer is received. Adjust pointer.
1608 *
1609 * NO-VALID:
1610 * SCSI-3 says if Save Data Pointer is not received, then we restart
1611 * processing and we can't adjust any SCSI data pointer in next data
1612 * phase.
1613 */
1614 if (execph & MSGIN_02_VALID) {
1615 nsp32_dbg(NSP32_DEBUG_BUSFREE, "MsgIn02_Valid");
1616
1617 /*
1618 * Check sack_cnt/saved_sack_cnt, then adjust sg table if
1619 * needed.
1620 */
1621 if (!(execph & MSGIN_00_VALID) &&
1622 ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE))) {
1623 unsigned int sacklen, s_sacklen;
1624
1625 /*
1626 * Read SACK count and SAVEDSACK count, then compare.
1627 */
1628 sacklen = nsp32_read4(base, SACK_CNT );
1629 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT);
1630
1631 /*
1632 * If SAVEDSACKCNT == 0, it means SavedDataPointer is
1633 * come after data transferring.
1634 */
1635 if (s_sacklen > 0) {
1636 /*
1637 * Comparing between sack and savedsack to
1638 * check the condition of AutoMsgIn03.
1639 *
1640 * If they are same, set msgin03 == TRUE,
1641 * COMMANDCONTROL_AUTO_MSGIN_03 is enabled at
1642 * reselection. On the other hand, if they
1643 * aren't same, set msgin03 == FALSE, and
1644 * COMMANDCONTROL_AUTO_MSGIN_03 is disabled at
1645 * reselection.
1646 */
1647 if (sacklen != s_sacklen) {
1648 data->cur_lunt->msgin03 = FALSE;
1649 } else {
1650 data->cur_lunt->msgin03 = TRUE;
1651 }
1652
1653 nsp32_adjust_busfree(SCpnt, s_sacklen);
1654 }
1655 }
1656
1657 /* This value has not substitude with valid value yet... */
1658 //data->cur_lunt->save_datp = data->cur_datp;
1659 } else {
1660 /*
1661 * no processing.
1662 */
1663 }
1664
1665 if (execph & MSGIN_03_VALID) {
1666 /* MsgIn03 was valid to be processed. No need processing. */
1667 }
1668
1669 /*
1670 * target SDTR check
1671 */
1672 if (data->cur_target->sync_flag & SDTR_INITIATOR) {
1673 /*
1674 * SDTR negotiation pulled by the initiator has not
1675 * finished yet. Fall back to ASYNC mode.
1676 */
1677 nsp32_set_async(data, data->cur_target);
1678 data->cur_target->sync_flag &= ~SDTR_INITIATOR;
1679 data->cur_target->sync_flag |= SDTR_DONE;
1680 } else if (data->cur_target->sync_flag & SDTR_TARGET) {
1681 /*
1682 * SDTR negotiation pulled by the target has been
1683 * negotiating.
1684 */
1685 if (execph & (MSGIN_00_VALID | MSGIN_04_VALID)) {
1686 /*
1687 * If valid message is received, then
1688 * negotiation is succeeded.
1689 */
1690 } else {
1691 /*
1692 * On the contrary, if unexpected bus free is
1693 * occurred, then negotiation is failed. Fall
1694 * back to ASYNC mode.
1695 */
1696 nsp32_set_async(data, data->cur_target);
1697 }
1698 data->cur_target->sync_flag &= ~SDTR_TARGET;
1699 data->cur_target->sync_flag |= SDTR_DONE;
1700 }
1701
1702 /*
1703 * It is always ensured by SCSI standard that initiator
1704 * switches into Bus Free Phase after
1705 * receiving message 00 (Command Complete), 04 (Disconnect).
1706 * It's the reason that processing here is valid.
1707 */
1708 if (execph & MSGIN_00_VALID) {
1709 /* MsgIn 00: Command Complete */
1710 nsp32_dbg(NSP32_DEBUG_BUSFREE, "command complete");
1711
1712 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1713 SCpnt->SCp.Message = 0;
1714 nsp32_dbg(NSP32_DEBUG_BUSFREE,
1715 "normal end stat=0x%x resid=0x%x\n",
1716 SCpnt->SCp.Status, scsi_get_resid(SCpnt));
1717 SCpnt->result = (DID_OK << 16) |
1718 (SCpnt->SCp.Message << 8) |
1719 (SCpnt->SCp.Status << 0);
1720 nsp32_scsi_done(SCpnt);
1721 /* All operation is done */
1722 return TRUE;
1723 } else if (execph & MSGIN_04_VALID) {
1724 /* MsgIn 04: Disconnect */
1725 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1726 SCpnt->SCp.Message = 4;
1727
1728 nsp32_dbg(NSP32_DEBUG_BUSFREE, "disconnect");
1729 return TRUE;
1730 } else {
1731 /* Unexpected bus free */
1732 nsp32_msg(KERN_WARNING, "unexpected bus free occurred");
1733
1734 /* DID_ERROR? */
1735 //SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Message << 8) | (SCpnt->SCp.Status << 0);
1736 SCpnt->result = DID_ERROR << 16;
1737 nsp32_scsi_done(SCpnt);
1738 return TRUE;
1739 }
1740 return FALSE;
1741}
1742
1743
1744/*
1745 * nsp32_adjust_busfree - adjusting SG table
1746 *
1747 * Note: This driver adjust the SG table using SCSI ACK
1748 * counter instead of BMCNT counter!
1749 */
1750static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen)
1751{
1752 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1753 int old_entry = data->cur_entry;
1754 int new_entry;
1755 int sg_num = data->cur_lunt->sg_num;
1756 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
1757 unsigned int restlen, sentlen;
1758 u32_le len, addr;
1759
1760 nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", scsi_get_resid(SCpnt));
1761
1762 /* adjust saved SACK count with 4 byte start address boundary */
1763 s_sacklen -= le32_to_cpu(sgt[old_entry].addr) & 3;
1764
1765 /*
1766 * calculate new_entry from sack count and each sgt[].len
1767 * calculate the byte which is intent to send
1768 */
1769 sentlen = 0;
1770 for (new_entry = old_entry; new_entry < sg_num; new_entry++) {
1771 sentlen += (le32_to_cpu(sgt[new_entry].len) & ~SGTEND);
1772 if (sentlen > s_sacklen) {
1773 break;
1774 }
1775 }
1776
1777 /* all sgt is processed */
1778 if (new_entry == sg_num) {
1779 goto last;
1780 }
1781
1782 if (sentlen == s_sacklen) {
1783 /* XXX: confirm it's ok or not */
1784 /* In this case, it's ok because we are at
1785 the head element of the sg. restlen is correctly calculated. */
1786 }
1787
1788 /* calculate the rest length for transferring */
1789 restlen = sentlen - s_sacklen;
1790
1791 /* update adjusting current SG table entry */
1792 len = le32_to_cpu(sgt[new_entry].len);
1793 addr = le32_to_cpu(sgt[new_entry].addr);
1794 addr += (len - restlen);
1795 sgt[new_entry].addr = cpu_to_le32(addr);
1796 sgt[new_entry].len = cpu_to_le32(restlen);
1797
1798 /* set cur_entry with new_entry */
1799 data->cur_entry = new_entry;
1800
1801 return;
1802
1803 last:
1804 if (scsi_get_resid(SCpnt) < sentlen) {
1805 nsp32_msg(KERN_ERR, "resid underflow");
1806 }
1807
1808 scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) - sentlen);
1809 nsp32_dbg(NSP32_DEBUG_SGLIST, "new resid=0x%x", scsi_get_resid(SCpnt));
1810
1811 /* update hostdata and lun */
1812
1813 return;
1814}
1815
1816
1817/*
1818 * It's called MsgOut phase occur.
1819 * NinjaSCSI-32Bi/UDE automatically processes up to 3 messages in
1820 * message out phase. It, however, has more than 3 messages,
1821 * HBA creates the interrupt and we have to process by hand.
1822 */
1823static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)
1824{
1825 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1826 unsigned int base = SCpnt->device->host->io_port;
1827 //unsigned short command;
1828 long new_sgtp;
1829 int i;
1830
1831 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
1832 "enter: msgout_len: 0x%x", data->msgout_len);
1833
1834 /*
1835 * If MsgOut phase is occurred without having any
1836 * message, then No_Operation is sent (SCSI-2).
1837 */
1838 if (data->msgout_len == 0) {
1839 nsp32_build_nop(SCpnt);
1840 }
1841
1842 /*
1843 * Set SGTP ADDR current entry for restarting AUTOSCSI,
1844 * because SGTP is incremented next point.
1845 * There is few statement in the specification...
1846 */
1847 new_sgtp = data->cur_lunt->sglun_paddr +
1848 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
1849
1850 /*
1851 * send messages
1852 */
1853 for (i = 0; i < data->msgout_len; i++) {
1854 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
1855 "%d : 0x%x", i, data->msgoutbuf[i]);
1856
1857 /*
1858 * Check REQ is asserted.
1859 */
1860 nsp32_wait_req(data, ASSERT);
1861
1862 if (i == (data->msgout_len - 1)) {
1863 /*
1864 * If the last message, set the AutoSCSI restart
1865 * before send back the ack message. AutoSCSI
1866 * restart automatically negate ATN signal.
1867 */
1868 //command = (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02);
1869 //nsp32_restart_autoscsi(SCpnt, command);
1870 nsp32_write2(base, COMMAND_CONTROL,
1871 (CLEAR_CDB_FIFO_POINTER |
1872 AUTO_COMMAND_PHASE |
1873 AUTOSCSI_RESTART |
1874 AUTO_MSGIN_00_OR_04 |
1875 AUTO_MSGIN_02 ));
1876 }
1877 /*
1878 * Write data with SACK, then wait sack is
1879 * automatically negated.
1880 */
1881 nsp32_write1(base, SCSI_DATA_WITH_ACK, data->msgoutbuf[i]);
1882 nsp32_wait_sack(data, NEGATE);
1883
1884 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "bus: 0x%x\n",
1885 nsp32_read1(base, SCSI_BUS_MONITOR));
1886 };
1887
1888 data->msgout_len = 0;
1889
1890 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "exit");
1891}
1892
1893/*
1894 * Restart AutoSCSI
1895 *
1896 * Note: Restarting AutoSCSI needs set:
1897 * SYNC_REG, ACK_WIDTH, SGT_ADR, TRANSFER_CONTROL
1898 */
1899static void nsp32_restart_autoscsi(struct scsi_cmnd *SCpnt, unsigned short command)
1900{
1901 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1902 unsigned int base = data->BaseAddress;
1903 unsigned short transfer = 0;
1904
1905 nsp32_dbg(NSP32_DEBUG_RESTART, "enter");
1906
1907 if (data->cur_target == NULL || data->cur_lunt == NULL) {
1908 nsp32_msg(KERN_ERR, "Target or Lun is invalid");
1909 }
1910
1911 /*
1912 * set SYNC_REG
1913 * Don't set BM_START_ADR before setting this register.
1914 */
1915 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg);
1916
1917 /*
1918 * set ACKWIDTH
1919 */
1920 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth);
1921
1922 /*
1923 * set SREQ hazard killer sampling rate
1924 */
1925 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg);
1926
1927 /*
1928 * set SGT ADDR (physical address)
1929 */
1930 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr);
1931
1932 /*
1933 * set TRANSFER CONTROL REG
1934 */
1935 transfer = 0;
1936 transfer |= (TRANSFER_GO | ALL_COUNTER_CLR);
1937 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
1938 if (scsi_bufflen(SCpnt) > 0) {
1939 transfer |= BM_START;
1940 }
1941 } else if (data->trans_method & NSP32_TRANSFER_MMIO) {
1942 transfer |= CB_MMIO_MODE;
1943 } else if (data->trans_method & NSP32_TRANSFER_PIO) {
1944 transfer |= CB_IO_MODE;
1945 }
1946 nsp32_write2(base, TRANSFER_CONTROL, transfer);
1947
1948 /*
1949 * restart AutoSCSI
1950 *
1951 * TODO: COMMANDCONTROL_AUTO_COMMAND_PHASE is needed ?
1952 */
1953 command |= (CLEAR_CDB_FIFO_POINTER |
1954 AUTO_COMMAND_PHASE |
1955 AUTOSCSI_RESTART );
1956 nsp32_write2(base, COMMAND_CONTROL, command);
1957
1958 nsp32_dbg(NSP32_DEBUG_RESTART, "exit");
1959}
1960
1961
1962/*
1963 * cannot run automatically message in occur
1964 */
1965static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
1966 unsigned long irq_status,
1967 unsigned short execph)
1968{
1969 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1970 unsigned int base = SCpnt->device->host->io_port;
1971 unsigned char msg;
1972 unsigned char msgtype;
1973 unsigned char newlun;
1974 unsigned short command = 0;
1975 int msgclear = TRUE;
1976 long new_sgtp;
1977 int ret;
1978
1979 /*
1980 * read first message
1981 * Use SCSIDATA_W_ACK instead of SCSIDATAIN, because the procedure
1982 * of Message-In have to be processed before sending back SCSI ACK.
1983 */
1984 msg = nsp32_read1(base, SCSI_DATA_IN);
1985 data->msginbuf[(unsigned char)data->msgin_len] = msg;
1986 msgtype = data->msginbuf[0];
1987 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR,
1988 "enter: msglen: 0x%x msgin: 0x%x msgtype: 0x%x",
1989 data->msgin_len, msg, msgtype);
1990
1991 /*
1992 * TODO: We need checking whether bus phase is message in?
1993 */
1994
1995 /*
1996 * assert SCSI ACK
1997 */
1998 nsp32_sack_assert(data);
1999
2000 /*
2001 * processing IDENTIFY
2002 */
2003 if (msgtype & 0x80) {
2004 if (!(irq_status & IRQSTATUS_RESELECT_OCCUER)) {
2005 /* Invalid (non reselect) phase */
2006 goto reject;
2007 }
2008
2009 newlun = msgtype & 0x1f; /* TODO: SPI-3 compliant? */
2010 ret = nsp32_reselection(SCpnt, newlun);
2011 if (ret == TRUE) {
2012 goto restart;
2013 } else {
2014 goto reject;
2015 }
2016 }
2017
2018 /*
2019 * processing messages except for IDENTIFY
2020 *
2021 * TODO: Messages are all SCSI-2 terminology. SCSI-3 compliance is TODO.
2022 */
2023 switch (msgtype) {
2024 /*
2025 * 1-byte message
2026 */
2027 case COMMAND_COMPLETE:
2028 case DISCONNECT:
2029 /*
2030 * These messages should not be occurred.
2031 * They should be processed on AutoSCSI sequencer.
2032 */
2033 nsp32_msg(KERN_WARNING,
2034 "unexpected message of AutoSCSI MsgIn: 0x%x", msg);
2035 break;
2036
2037 case RESTORE_POINTERS:
2038 /*
2039 * AutoMsgIn03 is disabled, and HBA gets this message.
2040 */
2041
2042 if ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE)) {
2043 unsigned int s_sacklen;
2044
2045 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT);
2046 if ((execph & MSGIN_02_VALID) && (s_sacklen > 0)) {
2047 nsp32_adjust_busfree(SCpnt, s_sacklen);
2048 } else {
2049 /* No need to rewrite SGT */
2050 }
2051 }
2052 data->cur_lunt->msgin03 = FALSE;
2053
2054 /* Update with the new value */
2055
2056 /* reset SACK/SavedACK counter (or ALL clear?) */
2057 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
2058
2059 /*
2060 * set new sg pointer
2061 */
2062 new_sgtp = data->cur_lunt->sglun_paddr +
2063 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
2064 nsp32_write4(base, SGT_ADR, new_sgtp);
2065
2066 break;
2067
2068 case SAVE_POINTERS:
2069 /*
2070 * These messages should not be occurred.
2071 * They should be processed on AutoSCSI sequencer.
2072 */
2073 nsp32_msg (KERN_WARNING,
2074 "unexpected message of AutoSCSI MsgIn: SAVE_POINTERS");
2075
2076 break;
2077
2078 case MESSAGE_REJECT:
2079 /* If previous message_out is sending SDTR, and get
2080 message_reject from target, SDTR negotiation is failed */
2081 if (data->cur_target->sync_flag &
2082 (SDTR_INITIATOR | SDTR_TARGET)) {
2083 /*
2084 * Current target is negotiating SDTR, but it's
2085 * failed. Fall back to async transfer mode, and set
2086 * SDTR_DONE.
2087 */
2088 nsp32_set_async(data, data->cur_target);
2089 data->cur_target->sync_flag &= ~SDTR_INITIATOR;
2090 data->cur_target->sync_flag |= SDTR_DONE;
2091
2092 }
2093 break;
2094
2095 case LINKED_CMD_COMPLETE:
2096 case LINKED_FLG_CMD_COMPLETE:
2097 /* queue tag is not supported currently */
2098 nsp32_msg (KERN_WARNING,
2099 "unsupported message: 0x%x", msgtype);
2100 break;
2101
2102 case INITIATE_RECOVERY:
2103 /* staring ECA (Extended Contingent Allegiance) state. */
2104 /* This message is declined in SPI2 or later. */
2105
2106 goto reject;
2107
2108 /*
2109 * 2-byte message
2110 */
2111 case SIMPLE_QUEUE_TAG:
2112 case 0x23:
2113 /*
2114 * 0x23: Ignore_Wide_Residue is not declared in scsi.h.
2115 * No support is needed.
2116 */
2117 if (data->msgin_len >= 1) {
2118 goto reject;
2119 }
2120
2121 /* current position is 1-byte of 2 byte */
2122 msgclear = FALSE;
2123
2124 break;
2125
2126 /*
2127 * extended message
2128 */
2129 case EXTENDED_MESSAGE:
2130 if (data->msgin_len < 1) {
2131 /*
2132 * Current position does not reach 2-byte
2133 * (2-byte is extended message length).
2134 */
2135 msgclear = FALSE;
2136 break;
2137 }
2138
2139 if ((data->msginbuf[1] + 1) > data->msgin_len) {
2140 /*
2141 * Current extended message has msginbuf[1] + 2
2142 * (msgin_len starts counting from 0, so buf[1] + 1).
2143 * If current message position is not finished,
2144 * continue receiving message.
2145 */
2146 msgclear = FALSE;
2147 break;
2148 }
2149
2150 /*
2151 * Reach here means regular length of each type of
2152 * extended messages.
2153 */
2154 switch (data->msginbuf[2]) {
2155 case EXTENDED_MODIFY_DATA_POINTER:
2156 /* TODO */
2157 goto reject; /* not implemented yet */
2158 break;
2159
2160 case EXTENDED_SDTR:
2161 /*
2162 * Exchange this message between initiator and target.
2163 */
2164 if (data->msgin_len != EXTENDED_SDTR_LEN + 1) {
2165 /*
2166 * received inappropriate message.
2167 */
2168 goto reject;
2169 break;
2170 }
2171
2172 nsp32_analyze_sdtr(SCpnt);
2173
2174 break;
2175
2176 case EXTENDED_EXTENDED_IDENTIFY:
2177 /* SCSI-I only, not supported. */
2178 goto reject; /* not implemented yet */
2179
2180 break;
2181
2182 case EXTENDED_WDTR:
2183 goto reject; /* not implemented yet */
2184
2185 break;
2186
2187 default:
2188 goto reject;
2189 }
2190 break;
2191
2192 default:
2193 goto reject;
2194 }
2195
2196 restart:
2197 if (msgclear == TRUE) {
2198 data->msgin_len = 0;
2199
2200 /*
2201 * If restarting AutoSCSI, but there are some message to out
2202 * (msgout_len > 0), set AutoATN, and set SCSIMSGOUT as 0
2203 * (MV_VALID = 0). When commandcontrol is written with
2204 * AutoSCSI restart, at the same time MsgOutOccur should be
2205 * happened (however, such situation is really possible...?).
2206 */
2207 if (data->msgout_len > 0) {
2208 nsp32_write4(base, SCSI_MSG_OUT, 0);
2209 command |= AUTO_ATN;
2210 }
2211
2212 /*
2213 * restart AutoSCSI
2214 * If it's failed, COMMANDCONTROL_AUTO_COMMAND_PHASE is needed.
2215 */
2216 command |= (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02);
2217
2218 /*
2219 * If current msgin03 is TRUE, then flag on.
2220 */
2221 if (data->cur_lunt->msgin03 == TRUE) {
2222 command |= AUTO_MSGIN_03;
2223 }
2224 data->cur_lunt->msgin03 = FALSE;
2225 } else {
2226 data->msgin_len++;
2227 }
2228
2229 /*
2230 * restart AutoSCSI
2231 */
2232 nsp32_restart_autoscsi(SCpnt, command);
2233
2234 /*
2235 * wait SCSI REQ negate for REQ-ACK handshake
2236 */
2237 nsp32_wait_req(data, NEGATE);
2238
2239 /*
2240 * negate SCSI ACK
2241 */
2242 nsp32_sack_negate(data);
2243
2244 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit");
2245
2246 return;
2247
2248 reject:
2249 nsp32_msg(KERN_WARNING,
2250 "invalid or unsupported MessageIn, rejected. "
2251 "current msg: 0x%x (len: 0x%x), processing msg: 0x%x",
2252 msg, data->msgin_len, msgtype);
2253 nsp32_build_reject(SCpnt);
2254 data->msgin_len = 0;
2255
2256 goto restart;
2257}
2258
2259/*
2260 *
2261 */
2262static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
2263{
2264 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2265 nsp32_target *target = data->cur_target;
2266 nsp32_sync_table *synct;
2267 unsigned char get_period = data->msginbuf[3];
2268 unsigned char get_offset = data->msginbuf[4];
2269 int entry;
2270 int syncnum;
2271
2272 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "enter");
2273
2274 synct = data->synct;
2275 syncnum = data->syncnum;
2276
2277 /*
2278 * If this inititor sent the SDTR message, then target responds SDTR,
2279 * initiator SYNCREG, ACKWIDTH from SDTR parameter.
2280 * Messages are not appropriate, then send back reject message.
2281 * If initiator did not send the SDTR, but target sends SDTR,
2282 * initiator calculator the appropriate parameter and send back SDTR.
2283 */
2284 if (target->sync_flag & SDTR_INITIATOR) {
2285 /*
2286 * Initiator sent SDTR, the target responds and
2287 * send back negotiation SDTR.
2288 */
2289 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target responds SDTR");
2290
2291 target->sync_flag &= ~SDTR_INITIATOR;
2292 target->sync_flag |= SDTR_DONE;
2293
2294 /*
2295 * offset:
2296 */
2297 if (get_offset > SYNC_OFFSET) {
2298 /*
2299 * Negotiation is failed, the target send back
2300 * unexpected offset value.
2301 */
2302 goto reject;
2303 }
2304
2305 if (get_offset == ASYNC_OFFSET) {
2306 /*
2307 * Negotiation is succeeded, the target want
2308 * to fall back into asynchronous transfer mode.
2309 */
2310 goto async;
2311 }
2312
2313 /*
2314 * period:
2315 * Check whether sync period is too short. If too short,
2316 * fall back to async mode. If it's ok, then investigate
2317 * the received sync period. If sync period is acceptable
2318 * between sync table start_period and end_period, then
2319 * set this I_T nexus as sent offset and period.
2320 * If it's not acceptable, send back reject and fall back
2321 * to async mode.
2322 */
2323 if (get_period < data->synct[0].period_num) {
2324 /*
2325 * Negotiation is failed, the target send back
2326 * unexpected period value.
2327 */
2328 goto reject;
2329 }
2330
2331 entry = nsp32_search_period_entry(data, target, get_period);
2332
2333 if (entry < 0) {
2334 /*
2335 * Target want to use long period which is not
2336 * acceptable NinjaSCSI-32Bi/UDE.
2337 */
2338 goto reject;
2339 }
2340
2341 /*
2342 * Set new sync table and offset in this I_T nexus.
2343 */
2344 nsp32_set_sync_entry(data, target, entry, get_offset);
2345 } else {
2346 /* Target send SDTR to initiator. */
2347 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target send SDTR");
2348
2349 target->sync_flag |= SDTR_INITIATOR;
2350
2351 /* offset: */
2352 if (get_offset > SYNC_OFFSET) {
2353 /* send back as SYNC_OFFSET */
2354 get_offset = SYNC_OFFSET;
2355 }
2356
2357 /* period: */
2358 if (get_period < data->synct[0].period_num) {
2359 get_period = data->synct[0].period_num;
2360 }
2361
2362 entry = nsp32_search_period_entry(data, target, get_period);
2363
2364 if (get_offset == ASYNC_OFFSET || entry < 0) {
2365 nsp32_set_async(data, target);
2366 nsp32_build_sdtr(SCpnt, 0, ASYNC_OFFSET);
2367 } else {
2368 nsp32_set_sync_entry(data, target, entry, get_offset);
2369 nsp32_build_sdtr(SCpnt, get_period, get_offset);
2370 }
2371 }
2372
2373 target->period = get_period;
2374 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit");
2375 return;
2376
2377 reject:
2378 /*
2379 * If the current message is unacceptable, send back to the target
2380 * with reject message.
2381 */
2382 nsp32_build_reject(SCpnt);
2383
2384 async:
2385 nsp32_set_async(data, target); /* set as ASYNC transfer mode */
2386
2387 target->period = 0;
2388 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit: set async");
2389 return;
2390}
2391
2392
2393/*
2394 * Search config entry number matched in sync_table from given
2395 * target and speed period value. If failed to search, return negative value.
2396 */
2397static int nsp32_search_period_entry(nsp32_hw_data *data,
2398 nsp32_target *target,
2399 unsigned char period)
2400{
2401 int i;
2402
2403 if (target->limit_entry >= data->syncnum) {
2404 nsp32_msg(KERN_ERR, "limit_entry exceeds syncnum!");
2405 target->limit_entry = 0;
2406 }
2407
2408 for (i = target->limit_entry; i < data->syncnum; i++) {
2409 if (period >= data->synct[i].start_period &&
2410 period <= data->synct[i].end_period) {
2411 break;
2412 }
2413 }
2414
2415 /*
2416 * Check given period value is over the sync_table value.
2417 * If so, return max value.
2418 */
2419 if (i == data->syncnum) {
2420 i = -1;
2421 }
2422
2423 return i;
2424}
2425
2426
2427/*
2428 * target <-> initiator use ASYNC transfer
2429 */
2430static void nsp32_set_async(nsp32_hw_data *data, nsp32_target *target)
2431{
2432 unsigned char period = data->synct[target->limit_entry].period_num;
2433
2434 target->offset = ASYNC_OFFSET;
2435 target->period = 0;
2436 target->syncreg = TO_SYNCREG(period, ASYNC_OFFSET);
2437 target->ackwidth = 0;
2438 target->sample_reg = 0;
2439
2440 nsp32_dbg(NSP32_DEBUG_SYNC, "set async");
2441}
2442
2443
2444/*
2445 * target <-> initiator use maximum SYNC transfer
2446 */
2447static void nsp32_set_max_sync(nsp32_hw_data *data,
2448 nsp32_target *target,
2449 unsigned char *period,
2450 unsigned char *offset)
2451{
2452 unsigned char period_num, ackwidth;
2453
2454 period_num = data->synct[target->limit_entry].period_num;
2455 *period = data->synct[target->limit_entry].start_period;
2456 ackwidth = data->synct[target->limit_entry].ackwidth;
2457 *offset = SYNC_OFFSET;
2458
2459 target->syncreg = TO_SYNCREG(period_num, *offset);
2460 target->ackwidth = ackwidth;
2461 target->offset = *offset;
2462 target->sample_reg = 0; /* disable SREQ sampling */
2463}
2464
2465
2466/*
2467 * target <-> initiator use entry number speed
2468 */
2469static void nsp32_set_sync_entry(nsp32_hw_data *data,
2470 nsp32_target *target,
2471 int entry,
2472 unsigned char offset)
2473{
2474 unsigned char period, ackwidth, sample_rate;
2475
2476 period = data->synct[entry].period_num;
2477 ackwidth = data->synct[entry].ackwidth;
2478 offset = offset;
2479 sample_rate = data->synct[entry].sample_rate;
2480
2481 target->syncreg = TO_SYNCREG(period, offset);
2482 target->ackwidth = ackwidth;
2483 target->offset = offset;
2484 target->sample_reg = sample_rate | SAMPLING_ENABLE;
2485
2486 nsp32_dbg(NSP32_DEBUG_SYNC, "set sync");
2487}
2488
2489
2490/*
2491 * It waits until SCSI REQ becomes assertion or negation state.
2492 *
2493 * Note: If nsp32_msgin_occur is called, we asserts SCSI ACK. Then
2494 * connected target responds SCSI REQ negation. We have to wait
2495 * SCSI REQ becomes negation in order to negate SCSI ACK signal for
2496 * REQ-ACK handshake.
2497 */
2498static void nsp32_wait_req(nsp32_hw_data *data, int state)
2499{
2500 unsigned int base = data->BaseAddress;
2501 int wait_time = 0;
2502 unsigned char bus, req_bit;
2503
2504 if (!((state == ASSERT) || (state == NEGATE))) {
2505 nsp32_msg(KERN_ERR, "unknown state designation");
2506 }
2507 /* REQ is BIT(5) */
2508 req_bit = (state == ASSERT ? BUSMON_REQ : 0);
2509
2510 do {
2511 bus = nsp32_read1(base, SCSI_BUS_MONITOR);
2512 if ((bus & BUSMON_REQ) == req_bit) {
2513 nsp32_dbg(NSP32_DEBUG_WAIT,
2514 "wait_time: %d", wait_time);
2515 return;
2516 }
2517 udelay(1);
2518 wait_time++;
2519 } while (wait_time < REQSACK_TIMEOUT_TIME);
2520
2521 nsp32_msg(KERN_WARNING, "wait REQ timeout, req_bit: 0x%x", req_bit);
2522}
2523
2524/*
2525 * It waits until SCSI SACK becomes assertion or negation state.
2526 */
2527static void nsp32_wait_sack(nsp32_hw_data *data, int state)
2528{
2529 unsigned int base = data->BaseAddress;
2530 int wait_time = 0;
2531 unsigned char bus, ack_bit;
2532
2533 if (!((state == ASSERT) || (state == NEGATE))) {
2534 nsp32_msg(KERN_ERR, "unknown state designation");
2535 }
2536 /* ACK is BIT(4) */
2537 ack_bit = (state == ASSERT ? BUSMON_ACK : 0);
2538
2539 do {
2540 bus = nsp32_read1(base, SCSI_BUS_MONITOR);
2541 if ((bus & BUSMON_ACK) == ack_bit) {
2542 nsp32_dbg(NSP32_DEBUG_WAIT,
2543 "wait_time: %d", wait_time);
2544 return;
2545 }
2546 udelay(1);
2547 wait_time++;
2548 } while (wait_time < REQSACK_TIMEOUT_TIME);
2549
2550 nsp32_msg(KERN_WARNING, "wait SACK timeout, ack_bit: 0x%x", ack_bit);
2551}
2552
2553/*
2554 * assert SCSI ACK
2555 *
2556 * Note: SCSI ACK assertion needs with ACKENB=1, AUTODIRECTION=1.
2557 */
2558static void nsp32_sack_assert(nsp32_hw_data *data)
2559{
2560 unsigned int base = data->BaseAddress;
2561 unsigned char busctrl;
2562
2563 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL);
2564 busctrl |= (BUSCTL_ACK | AUTODIRECTION | ACKENB);
2565 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl);
2566}
2567
2568/*
2569 * negate SCSI ACK
2570 */
2571static void nsp32_sack_negate(nsp32_hw_data *data)
2572{
2573 unsigned int base = data->BaseAddress;
2574 unsigned char busctrl;
2575
2576 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL);
2577 busctrl &= ~BUSCTL_ACK;
2578 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl);
2579}
2580
2581
2582
2583/*
2584 * Note: n_io_port is defined as 0x7f because I/O register port is
2585 * assigned as:
2586 * 0x800-0x8ff: memory mapped I/O port
2587 * 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly)
2588 * 0xc00-0xfff: CardBus status registers
2589 */
2590static int nsp32_detect(struct pci_dev *pdev)
2591{
2592 struct Scsi_Host *host; /* registered host structure */
2593 struct resource *res;
2594 nsp32_hw_data *data;
2595 int ret;
2596 int i, j;
2597
2598 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
2599
2600 /*
2601 * register this HBA as SCSI device
2602 */
2603 host = scsi_host_alloc(&nsp32_template, sizeof(nsp32_hw_data));
2604 if (host == NULL) {
2605 nsp32_msg (KERN_ERR, "failed to scsi register");
2606 goto err;
2607 }
2608
2609 /*
2610 * set nsp32_hw_data
2611 */
2612 data = (nsp32_hw_data *)host->hostdata;
2613
2614 memcpy(data, &nsp32_data_base, sizeof(nsp32_hw_data));
2615
2616 host->irq = data->IrqNumber;
2617 host->io_port = data->BaseAddress;
2618 host->unique_id = data->BaseAddress;
2619 host->n_io_port = data->NumAddress;
2620 host->base = (unsigned long)data->MmioAddress;
2621
2622 data->Host = host;
2623 spin_lock_init(&(data->Lock));
2624
2625 data->cur_lunt = NULL;
2626 data->cur_target = NULL;
2627
2628 /*
2629 * Bus master transfer mode is supported currently.
2630 */
2631 data->trans_method = NSP32_TRANSFER_BUSMASTER;
2632
2633 /*
2634 * Set clock div, CLOCK_4 (HBA has own external clock, and
2635 * dividing * 100ns/4).
2636 * Currently CLOCK_4 has only tested, not for CLOCK_2/PCICLK yet.
2637 */
2638 data->clock = CLOCK_4;
2639
2640 /*
2641 * Select appropriate nsp32_sync_table and set I_CLOCKDIV.
2642 */
2643 switch (data->clock) {
2644 case CLOCK_4:
2645 /* If data->clock is CLOCK_4, then select 40M sync table. */
2646 data->synct = nsp32_sync_table_40M;
2647 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M);
2648 break;
2649 case CLOCK_2:
2650 /* If data->clock is CLOCK_2, then select 20M sync table. */
2651 data->synct = nsp32_sync_table_20M;
2652 data->syncnum = ARRAY_SIZE(nsp32_sync_table_20M);
2653 break;
2654 case PCICLK:
2655 /* If data->clock is PCICLK, then select pci sync table. */
2656 data->synct = nsp32_sync_table_pci;
2657 data->syncnum = ARRAY_SIZE(nsp32_sync_table_pci);
2658 break;
2659 default:
2660 nsp32_msg(KERN_WARNING,
2661 "Invalid clock div is selected, set CLOCK_4.");
2662 /* Use default value CLOCK_4 */
2663 data->clock = CLOCK_4;
2664 data->synct = nsp32_sync_table_40M;
2665 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M);
2666 }
2667
2668 /*
2669 * setup nsp32_lunt
2670 */
2671
2672 /*
2673 * setup DMA
2674 */
2675 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
2676 nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
2677 goto scsi_unregister;
2678 }
2679
2680 /*
2681 * allocate autoparam DMA resource.
2682 */
2683 data->autoparam = pci_alloc_consistent(pdev, sizeof(nsp32_autoparam), &(data->auto_paddr));
2684 if (data->autoparam == NULL) {
2685 nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
2686 goto scsi_unregister;
2687 }
2688
2689 /*
2690 * allocate scatter-gather DMA resource.
2691 */
2692 data->sg_list = pci_alloc_consistent(pdev, NSP32_SG_TABLE_SIZE,
2693 &(data->sg_paddr));
2694 if (data->sg_list == NULL) {
2695 nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
2696 goto free_autoparam;
2697 }
2698
2699 for (i = 0; i < ARRAY_SIZE(data->lunt); i++) {
2700 for (j = 0; j < ARRAY_SIZE(data->lunt[0]); j++) {
2701 int offset = i * ARRAY_SIZE(data->lunt[0]) + j;
2702 nsp32_lunt tmp = {
2703 .SCpnt = NULL,
2704 .save_datp = 0,
2705 .msgin03 = FALSE,
2706 .sg_num = 0,
2707 .cur_entry = 0,
2708 .sglun = &(data->sg_list[offset]),
2709 .sglun_paddr = data->sg_paddr + (offset * sizeof(nsp32_sglun)),
2710 };
2711
2712 data->lunt[i][j] = tmp;
2713 }
2714 }
2715
2716 /*
2717 * setup target
2718 */
2719 for (i = 0; i < ARRAY_SIZE(data->target); i++) {
2720 nsp32_target *target = &(data->target[i]);
2721
2722 target->limit_entry = 0;
2723 target->sync_flag = 0;
2724 nsp32_set_async(data, target);
2725 }
2726
2727 /*
2728 * EEPROM check
2729 */
2730 ret = nsp32_getprom_param(data);
2731 if (ret == FALSE) {
2732 data->resettime = 3; /* default 3 */
2733 }
2734
2735 /*
2736 * setup HBA
2737 */
2738 nsp32hw_init(data);
2739
2740 snprintf(data->info_str, sizeof(data->info_str),
2741 "NinjaSCSI-32Bi/UDE: irq %d, io 0x%lx+0x%x",
2742 host->irq, host->io_port, host->n_io_port);
2743
2744 /*
2745 * SCSI bus reset
2746 *
2747 * Note: It's important to reset SCSI bus in initialization phase.
2748 * NinjaSCSI-32Bi/UDE HBA EEPROM seems to exchange SDTR when
2749 * system is coming up, so SCSI devices connected to HBA is set as
2750 * un-asynchronous mode. It brings the merit that this HBA is
2751 * ready to start synchronous transfer without any preparation,
2752 * but we are difficult to control transfer speed. In addition,
2753 * it prevents device transfer speed from effecting EEPROM start-up
2754 * SDTR. NinjaSCSI-32Bi/UDE has the feature if EEPROM is set as
2755 * Auto Mode, then FAST-10M is selected when SCSI devices are
2756 * connected same or more than 4 devices. It should be avoided
2757 * depending on this specification. Thus, resetting the SCSI bus
2758 * restores all connected SCSI devices to asynchronous mode, then
2759 * this driver set SDTR safely later, and we can control all SCSI
2760 * device transfer mode.
2761 */
2762 nsp32_do_bus_reset(data);
2763
2764 ret = request_irq(host->irq, do_nsp32_isr, IRQF_SHARED, "nsp32", data);
2765 if (ret < 0) {
2766 nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 "
2767 "SCSI PCI controller. Interrupt: %d", host->irq);
2768 goto free_sg_list;
2769 }
2770
2771 /*
2772 * PCI IO register
2773 */
2774 res = request_region(host->io_port, host->n_io_port, "nsp32");
2775 if (res == NULL) {
2776 nsp32_msg(KERN_ERR,
2777 "I/O region 0x%lx+0x%lx is already used",
2778 data->BaseAddress, data->NumAddress);
2779 goto free_irq;
2780 }
2781
2782 ret = scsi_add_host(host, &pdev->dev);
2783 if (ret) {
2784 nsp32_msg(KERN_ERR, "failed to add scsi host");
2785 goto free_region;
2786 }
2787 scsi_scan_host(host);
2788 pci_set_drvdata(pdev, host);
2789 return 0;
2790
2791 free_region:
2792 release_region(host->io_port, host->n_io_port);
2793
2794 free_irq:
2795 free_irq(host->irq, data);
2796
2797 free_sg_list:
2798 pci_free_consistent(pdev, NSP32_SG_TABLE_SIZE,
2799 data->sg_list, data->sg_paddr);
2800
2801 free_autoparam:
2802 pci_free_consistent(pdev, sizeof(nsp32_autoparam),
2803 data->autoparam, data->auto_paddr);
2804
2805 scsi_unregister:
2806 scsi_host_put(host);
2807
2808 err:
2809 return 1;
2810}
2811
2812static int nsp32_release(struct Scsi_Host *host)
2813{
2814 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
2815
2816 if (data->autoparam) {
2817 pci_free_consistent(data->Pci, sizeof(nsp32_autoparam),
2818 data->autoparam, data->auto_paddr);
2819 }
2820
2821 if (data->sg_list) {
2822 pci_free_consistent(data->Pci, NSP32_SG_TABLE_SIZE,
2823 data->sg_list, data->sg_paddr);
2824 }
2825
2826 if (host->irq) {
2827 free_irq(host->irq, data);
2828 }
2829
2830 if (host->io_port && host->n_io_port) {
2831 release_region(host->io_port, host->n_io_port);
2832 }
2833
2834 if (data->MmioAddress) {
2835 iounmap(data->MmioAddress);
2836 }
2837
2838 return 0;
2839}
2840
2841static const char *nsp32_info(struct Scsi_Host *shpnt)
2842{
2843 nsp32_hw_data *data = (nsp32_hw_data *)shpnt->hostdata;
2844
2845 return data->info_str;
2846}
2847
2848
2849/****************************************************************************
2850 * error handler
2851 */
2852static int nsp32_eh_abort(struct scsi_cmnd *SCpnt)
2853{
2854 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2855 unsigned int base = SCpnt->device->host->io_port;
2856
2857 nsp32_msg(KERN_WARNING, "abort");
2858
2859 if (data->cur_lunt->SCpnt == NULL) {
2860 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort failed");
2861 return FAILED;
2862 }
2863
2864 if (data->cur_target->sync_flag & (SDTR_INITIATOR | SDTR_TARGET)) {
2865 /* reset SDTR negotiation */
2866 data->cur_target->sync_flag = 0;
2867 nsp32_set_async(data, data->cur_target);
2868 }
2869
2870 nsp32_write2(base, TRANSFER_CONTROL, 0);
2871 nsp32_write2(base, BM_CNT, 0);
2872
2873 SCpnt->result = DID_ABORT << 16;
2874 nsp32_scsi_done(SCpnt);
2875
2876 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort success");
2877 return SUCCESS;
2878}
2879
2880static int nsp32_eh_bus_reset(struct scsi_cmnd *SCpnt)
2881{
2882 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2883 unsigned int base = SCpnt->device->host->io_port;
2884
2885 spin_lock_irq(SCpnt->device->host->host_lock);
2886
2887 nsp32_msg(KERN_INFO, "Bus Reset");
2888 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
2889
2890 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
2891 nsp32_do_bus_reset(data);
2892 nsp32_write2(base, IRQ_CONTROL, 0);
2893
2894 spin_unlock_irq(SCpnt->device->host->host_lock);
2895 return SUCCESS; /* SCSI bus reset is succeeded at any time. */
2896}
2897
2898static void nsp32_do_bus_reset(nsp32_hw_data *data)
2899{
2900 unsigned int base = data->BaseAddress;
2901 unsigned short intrdat;
2902 int i;
2903
2904 nsp32_dbg(NSP32_DEBUG_BUSRESET, "in");
2905
2906 /*
2907 * stop all transfer
2908 * clear TRANSFERCONTROL_BM_START
2909 * clear counter
2910 */
2911 nsp32_write2(base, TRANSFER_CONTROL, 0);
2912 nsp32_write4(base, BM_CNT, 0);
2913 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
2914
2915 /*
2916 * fall back to asynchronous transfer mode
2917 * initialize SDTR negotiation flag
2918 */
2919 for (i = 0; i < ARRAY_SIZE(data->target); i++) {
2920 nsp32_target *target = &data->target[i];
2921
2922 target->sync_flag = 0;
2923 nsp32_set_async(data, target);
2924 }
2925
2926 /*
2927 * reset SCSI bus
2928 */
2929 nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
2930 udelay(RESET_HOLD_TIME);
2931 nsp32_write1(base, SCSI_BUS_CONTROL, 0);
2932 for(i = 0; i < 5; i++) {
2933 intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
2934 nsp32_dbg(NSP32_DEBUG_BUSRESET, "irq:1: 0x%x", intrdat);
2935 }
2936
2937 data->CurrentSC = NULL;
2938}
2939
2940static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt)
2941{
2942 struct Scsi_Host *host = SCpnt->device->host;
2943 unsigned int base = SCpnt->device->host->io_port;
2944 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
2945
2946 nsp32_msg(KERN_INFO, "Host Reset");
2947 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
2948
2949 spin_lock_irq(SCpnt->device->host->host_lock);
2950
2951 nsp32hw_init(data);
2952 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
2953 nsp32_do_bus_reset(data);
2954 nsp32_write2(base, IRQ_CONTROL, 0);
2955
2956 spin_unlock_irq(SCpnt->device->host->host_lock);
2957 return SUCCESS; /* Host reset is succeeded at any time. */
2958}
2959
2960
2961/**************************************************************************
2962 * EEPROM handler
2963 */
2964
2965/*
2966 * getting EEPROM parameter
2967 */
2968static int nsp32_getprom_param(nsp32_hw_data *data)
2969{
2970 int vendor = data->pci_devid->vendor;
2971 int device = data->pci_devid->device;
2972 int ret, val, i;
2973
2974 /*
2975 * EEPROM checking.
2976 */
2977 ret = nsp32_prom_read(data, 0x7e);
2978 if (ret != 0x55) {
2979 nsp32_msg(KERN_INFO, "No EEPROM detected: 0x%x", ret);
2980 return FALSE;
2981 }
2982 ret = nsp32_prom_read(data, 0x7f);
2983 if (ret != 0xaa) {
2984 nsp32_msg(KERN_INFO, "Invalid number: 0x%x", ret);
2985 return FALSE;
2986 }
2987
2988 /*
2989 * check EEPROM type
2990 */
2991 if (vendor == PCI_VENDOR_ID_WORKBIT &&
2992 device == PCI_DEVICE_ID_WORKBIT_STANDARD) {
2993 ret = nsp32_getprom_c16(data);
2994 } else if (vendor == PCI_VENDOR_ID_WORKBIT &&
2995 device == PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC) {
2996 ret = nsp32_getprom_at24(data);
2997 } else if (vendor == PCI_VENDOR_ID_WORKBIT &&
2998 device == PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO ) {
2999 ret = nsp32_getprom_at24(data);
3000 } else {
3001 nsp32_msg(KERN_WARNING, "Unknown EEPROM");
3002 ret = FALSE;
3003 }
3004
3005 /* for debug : SPROM data full checking */
3006 for (i = 0; i <= 0x1f; i++) {
3007 val = nsp32_prom_read(data, i);
3008 nsp32_dbg(NSP32_DEBUG_EEPROM,
3009 "rom address 0x%x : 0x%x", i, val);
3010 }
3011
3012 return ret;
3013}
3014
3015
3016/*
3017 * AT24C01A (Logitec: LHA-600S), AT24C02 (Melco Buffalo: IFC-USLP) data map:
3018 *
3019 * ROMADDR
3020 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
3021 * Value 0x0: ASYNC, 0x0c: Ultra-20M, 0x19: Fast-10M
3022 * 0x07 : HBA Synchronous Transfer Period
3023 * Value 0: AutoSync, 1: Manual Setting
3024 * 0x08 - 0x0f : Not Used? (0x0)
3025 * 0x10 : Bus Termination
3026 * Value 0: Auto[ON], 1: ON, 2: OFF
3027 * 0x11 : Not Used? (0)
3028 * 0x12 : Bus Reset Delay Time (0x03)
3029 * 0x13 : Bootable CD Support
3030 * Value 0: Disable, 1: Enable
3031 * 0x14 : Device Scan
3032 * Bit 7 6 5 4 3 2 1 0
3033 * | <----------------->
3034 * | SCSI ID: Value 0: Skip, 1: YES
3035 * |-> Value 0: ALL scan, Value 1: Manual
3036 * 0x15 - 0x1b : Not Used? (0)
3037 * 0x1c : Constant? (0x01) (clock div?)
3038 * 0x1d - 0x7c : Not Used (0xff)
3039 * 0x7d : Not Used? (0xff)
3040 * 0x7e : Constant (0x55), Validity signature
3041 * 0x7f : Constant (0xaa), Validity signature
3042 */
3043static int nsp32_getprom_at24(nsp32_hw_data *data)
3044{
3045 int ret, i;
3046 int auto_sync;
3047 nsp32_target *target;
3048 int entry;
3049
3050 /*
3051 * Reset time which is designated by EEPROM.
3052 *
3053 * TODO: Not used yet.
3054 */
3055 data->resettime = nsp32_prom_read(data, 0x12);
3056
3057 /*
3058 * HBA Synchronous Transfer Period
3059 *
3060 * Note: auto_sync = 0: auto, 1: manual. Ninja SCSI HBA spec says
3061 * that if auto_sync is 0 (auto), and connected SCSI devices are
3062 * same or lower than 3, then transfer speed is set as ULTRA-20M.
3063 * On the contrary if connected SCSI devices are same or higher
3064 * than 4, then transfer speed is set as FAST-10M.
3065 *
3066 * I break this rule. The number of connected SCSI devices are
3067 * only ignored. If auto_sync is 0 (auto), then transfer speed is
3068 * forced as ULTRA-20M.
3069 */
3070 ret = nsp32_prom_read(data, 0x07);
3071 switch (ret) {
3072 case 0:
3073 auto_sync = TRUE;
3074 break;
3075 case 1:
3076 auto_sync = FALSE;
3077 break;
3078 default:
3079 nsp32_msg(KERN_WARNING,
3080 "Unsupported Auto Sync mode. Fall back to manual mode.");
3081 auto_sync = TRUE;
3082 }
3083
3084 if (trans_mode == ULTRA20M_MODE) {
3085 auto_sync = TRUE;
3086 }
3087
3088 /*
3089 * each device Synchronous Transfer Period
3090 */
3091 for (i = 0; i < NSP32_HOST_SCSIID; i++) {
3092 target = &data->target[i];
3093 if (auto_sync == TRUE) {
3094 target->limit_entry = 0; /* set as ULTRA20M */
3095 } else {
3096 ret = nsp32_prom_read(data, i);
3097 entry = nsp32_search_period_entry(data, target, ret);
3098 if (entry < 0) {
3099 /* search failed... set maximum speed */
3100 entry = 0;
3101 }
3102 target->limit_entry = entry;
3103 }
3104 }
3105
3106 return TRUE;
3107}
3108
3109
3110/*
3111 * C16 110 (I-O Data: SC-NBD) data map:
3112 *
3113 * ROMADDR
3114 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
3115 * Value 0x0: 20MB/S, 0x1: 10MB/S, 0x2: 5MB/S, 0x3: ASYNC
3116 * 0x07 : 0 (HBA Synchronous Transfer Period: Auto Sync)
3117 * 0x08 - 0x0f : Not Used? (0x0)
3118 * 0x10 : Transfer Mode
3119 * Value 0: PIO, 1: Busmater
3120 * 0x11 : Bus Reset Delay Time (0x00-0x20)
3121 * 0x12 : Bus Termination
3122 * Value 0: Disable, 1: Enable
3123 * 0x13 - 0x19 : Disconnection
3124 * Value 0: Disable, 1: Enable
3125 * 0x1a - 0x7c : Not Used? (0)
3126 * 0x7d : Not Used? (0xf8)
3127 * 0x7e : Constant (0x55), Validity signature
3128 * 0x7f : Constant (0xaa), Validity signature
3129 */
3130static int nsp32_getprom_c16(nsp32_hw_data *data)
3131{
3132 int ret, i;
3133 nsp32_target *target;
3134 int entry, val;
3135
3136 /*
3137 * Reset time which is designated by EEPROM.
3138 *
3139 * TODO: Not used yet.
3140 */
3141 data->resettime = nsp32_prom_read(data, 0x11);
3142
3143 /*
3144 * each device Synchronous Transfer Period
3145 */
3146 for (i = 0; i < NSP32_HOST_SCSIID; i++) {
3147 target = &data->target[i];
3148 ret = nsp32_prom_read(data, i);
3149 switch (ret) {
3150 case 0: /* 20MB/s */
3151 val = 0x0c;
3152 break;
3153 case 1: /* 10MB/s */
3154 val = 0x19;
3155 break;
3156 case 2: /* 5MB/s */
3157 val = 0x32;
3158 break;
3159 case 3: /* ASYNC */
3160 val = 0x00;
3161 break;
3162 default: /* default 20MB/s */
3163 val = 0x0c;
3164 break;
3165 }
3166 entry = nsp32_search_period_entry(data, target, val);
3167 if (entry < 0 || trans_mode == ULTRA20M_MODE) {
3168 /* search failed... set maximum speed */
3169 entry = 0;
3170 }
3171 target->limit_entry = entry;
3172 }
3173
3174 return TRUE;
3175}
3176
3177
3178/*
3179 * Atmel AT24C01A (drived in 5V) serial EEPROM routines
3180 */
3181static int nsp32_prom_read(nsp32_hw_data *data, int romaddr)
3182{
3183 int i, val;
3184
3185 /* start condition */
3186 nsp32_prom_start(data);
3187
3188 /* device address */
3189 nsp32_prom_write_bit(data, 1); /* 1 */
3190 nsp32_prom_write_bit(data, 0); /* 0 */
3191 nsp32_prom_write_bit(data, 1); /* 1 */
3192 nsp32_prom_write_bit(data, 0); /* 0 */
3193 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */
3194 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */
3195 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */
3196
3197 /* R/W: W for dummy write */
3198 nsp32_prom_write_bit(data, 0);
3199
3200 /* ack */
3201 nsp32_prom_write_bit(data, 0);
3202
3203 /* word address */
3204 for (i = 7; i >= 0; i--) {
3205 nsp32_prom_write_bit(data, ((romaddr >> i) & 1));
3206 }
3207
3208 /* ack */
3209 nsp32_prom_write_bit(data, 0);
3210
3211 /* start condition */
3212 nsp32_prom_start(data);
3213
3214 /* device address */
3215 nsp32_prom_write_bit(data, 1); /* 1 */
3216 nsp32_prom_write_bit(data, 0); /* 0 */
3217 nsp32_prom_write_bit(data, 1); /* 1 */
3218 nsp32_prom_write_bit(data, 0); /* 0 */
3219 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */
3220 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */
3221 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */
3222
3223 /* R/W: R */
3224 nsp32_prom_write_bit(data, 1);
3225
3226 /* ack */
3227 nsp32_prom_write_bit(data, 0);
3228
3229 /* data... */
3230 val = 0;
3231 for (i = 7; i >= 0; i--) {
3232 val += (nsp32_prom_read_bit(data) << i);
3233 }
3234
3235 /* no ack */
3236 nsp32_prom_write_bit(data, 1);
3237
3238 /* stop condition */
3239 nsp32_prom_stop(data);
3240
3241 return val;
3242}
3243
3244static void nsp32_prom_set(nsp32_hw_data *data, int bit, int val)
3245{
3246 int base = data->BaseAddress;
3247 int tmp;
3248
3249 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL);
3250
3251 if (val == 0) {
3252 tmp &= ~bit;
3253 } else {
3254 tmp |= bit;
3255 }
3256
3257 nsp32_index_write1(base, SERIAL_ROM_CTL, tmp);
3258
3259 udelay(10);
3260}
3261
3262static int nsp32_prom_get(nsp32_hw_data *data, int bit)
3263{
3264 int base = data->BaseAddress;
3265 int tmp, ret;
3266
3267 if (bit != SDA) {
3268 nsp32_msg(KERN_ERR, "return value is not appropriate");
3269 return 0;
3270 }
3271
3272
3273 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL) & bit;
3274
3275 if (tmp == 0) {
3276 ret = 0;
3277 } else {
3278 ret = 1;
3279 }
3280
3281 udelay(10);
3282
3283 return ret;
3284}
3285
3286static void nsp32_prom_start (nsp32_hw_data *data)
3287{
3288 /* start condition */
3289 nsp32_prom_set(data, SCL, 1);
3290 nsp32_prom_set(data, SDA, 1);
3291 nsp32_prom_set(data, ENA, 1); /* output mode */
3292 nsp32_prom_set(data, SDA, 0); /* keeping SCL=1 and transiting
3293 * SDA 1->0 is start condition */
3294 nsp32_prom_set(data, SCL, 0);
3295}
3296
3297static void nsp32_prom_stop (nsp32_hw_data *data)
3298{
3299 /* stop condition */
3300 nsp32_prom_set(data, SCL, 1);
3301 nsp32_prom_set(data, SDA, 0);
3302 nsp32_prom_set(data, ENA, 1); /* output mode */
3303 nsp32_prom_set(data, SDA, 1);
3304 nsp32_prom_set(data, SCL, 0);
3305}
3306
3307static void nsp32_prom_write_bit(nsp32_hw_data *data, int val)
3308{
3309 /* write */
3310 nsp32_prom_set(data, SDA, val);
3311 nsp32_prom_set(data, SCL, 1 );
3312 nsp32_prom_set(data, SCL, 0 );
3313}
3314
3315static int nsp32_prom_read_bit(nsp32_hw_data *data)
3316{
3317 int val;
3318
3319 /* read */
3320 nsp32_prom_set(data, ENA, 0); /* input mode */
3321 nsp32_prom_set(data, SCL, 1);
3322
3323 val = nsp32_prom_get(data, SDA);
3324
3325 nsp32_prom_set(data, SCL, 0);
3326 nsp32_prom_set(data, ENA, 1); /* output mode */
3327
3328 return val;
3329}
3330
3331
3332/**************************************************************************
3333 * Power Management
3334 */
3335#ifdef CONFIG_PM
3336
3337/* Device suspended */
3338static int nsp32_suspend(struct pci_dev *pdev, pm_message_t state)
3339{
3340 struct Scsi_Host *host = pci_get_drvdata(pdev);
3341
3342 nsp32_msg(KERN_INFO, "pci-suspend: pdev=0x%p, state=%ld, slot=%s, host=0x%p", pdev, state, pci_name(pdev), host);
3343
3344 pci_save_state (pdev);
3345 pci_disable_device (pdev);
3346 pci_set_power_state(pdev, pci_choose_state(pdev, state));
3347
3348 return 0;
3349}
3350
3351/* Device woken up */
3352static int nsp32_resume(struct pci_dev *pdev)
3353{
3354 struct Scsi_Host *host = pci_get_drvdata(pdev);
3355 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
3356 unsigned short reg;
3357
3358 nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p", pdev, pci_name(pdev), host);
3359
3360 pci_set_power_state(pdev, PCI_D0);
3361 pci_enable_wake (pdev, PCI_D0, 0);
3362 pci_restore_state (pdev);
3363
3364 reg = nsp32_read2(data->BaseAddress, INDEX_REG);
3365
3366 nsp32_msg(KERN_INFO, "io=0x%x reg=0x%x", data->BaseAddress, reg);
3367
3368 if (reg == 0xffff) {
3369 nsp32_msg(KERN_INFO, "missing device. abort resume.");
3370 return 0;
3371 }
3372
3373 nsp32hw_init (data);
3374 nsp32_do_bus_reset(data);
3375
3376 nsp32_msg(KERN_INFO, "resume success");
3377
3378 return 0;
3379}
3380
3381#endif
3382
3383/************************************************************************
3384 * PCI/Cardbus probe/remove routine
3385 */
3386static int __devinit nsp32_probe(struct pci_dev *pdev, const struct pci_device_id *id)
3387{
3388 int ret;
3389 nsp32_hw_data *data = &nsp32_data_base;
3390
3391 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
3392
3393 ret = pci_enable_device(pdev);
3394 if (ret) {
3395 nsp32_msg(KERN_ERR, "failed to enable pci device");
3396 return ret;
3397 }
3398
3399 data->Pci = pdev;
3400 data->pci_devid = id;
3401 data->IrqNumber = pdev->irq;
3402 data->BaseAddress = pci_resource_start(pdev, 0);
3403 data->NumAddress = pci_resource_len (pdev, 0);
3404 data->MmioAddress = pci_ioremap_bar(pdev, 1);
3405 data->MmioLength = pci_resource_len (pdev, 1);
3406
3407 pci_set_master(pdev);
3408
3409 ret = nsp32_detect(pdev);
3410
3411 nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s",
3412 pdev->irq,
3413 data->MmioAddress, data->MmioLength,
3414 pci_name(pdev),
3415 nsp32_model[id->driver_data]);
3416
3417 nsp32_dbg(NSP32_DEBUG_REGISTER, "exit %d", ret);
3418
3419 return ret;
3420}
3421
3422static void __devexit nsp32_remove(struct pci_dev *pdev)
3423{
3424 struct Scsi_Host *host = pci_get_drvdata(pdev);
3425
3426 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
3427
3428 scsi_remove_host(host);
3429
3430 nsp32_release(host);
3431
3432 scsi_host_put(host);
3433}
3434
3435static struct pci_driver nsp32_driver = {
3436 .name = "nsp32",
3437 .id_table = nsp32_pci_table,
3438 .probe = nsp32_probe,
3439 .remove = __devexit_p(nsp32_remove),
3440#ifdef CONFIG_PM
3441 .suspend = nsp32_suspend,
3442 .resume = nsp32_resume,
3443#endif
3444};
3445
3446/*********************************************************************
3447 * Moule entry point
3448 */
3449static int __init init_nsp32(void) {
3450 nsp32_msg(KERN_INFO, "loading...");
3451 return pci_register_driver(&nsp32_driver);
3452}
3453
3454static void __exit exit_nsp32(void) {
3455 nsp32_msg(KERN_INFO, "unloading...");
3456 pci_unregister_driver(&nsp32_driver);
3457}
3458
3459module_init(init_nsp32);
3460module_exit(exit_nsp32);
3461
3462/* end */
1/*
2 * NinjaSCSI-32Bi Cardbus, NinjaSCSI-32UDE PCI/CardBus SCSI driver
3 * Copyright (C) 2001, 2002, 2003
4 * YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
5 * GOTO Masanori <gotom@debian.or.jp>, <gotom@debian.org>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2, or (at your option)
10 * any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 *
18 * Revision History:
19 * 1.0: Initial Release.
20 * 1.1: Add /proc SDTR status.
21 * Remove obsolete error handler nsp32_reset.
22 * Some clean up.
23 * 1.2: PowerPC (big endian) support.
24 */
25
26#include <linux/module.h>
27#include <linux/init.h>
28#include <linux/kernel.h>
29#include <linux/string.h>
30#include <linux/timer.h>
31#include <linux/ioport.h>
32#include <linux/major.h>
33#include <linux/blkdev.h>
34#include <linux/interrupt.h>
35#include <linux/pci.h>
36#include <linux/delay.h>
37#include <linux/ctype.h>
38#include <linux/dma-mapping.h>
39
40#include <asm/dma.h>
41#include <asm/io.h>
42
43#include <scsi/scsi.h>
44#include <scsi/scsi_cmnd.h>
45#include <scsi/scsi_device.h>
46#include <scsi/scsi_host.h>
47#include <scsi/scsi_ioctl.h>
48
49#include "nsp32.h"
50
51
52/***********************************************************************
53 * Module parameters
54 */
55static int trans_mode = 0; /* default: BIOS */
56module_param (trans_mode, int, 0);
57MODULE_PARM_DESC(trans_mode, "transfer mode (0: BIOS(default) 1: Async 2: Ultra20M");
58#define ASYNC_MODE 1
59#define ULTRA20M_MODE 2
60
61static bool auto_param = 0; /* default: ON */
62module_param (auto_param, bool, 0);
63MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)");
64
65static bool disc_priv = 1; /* default: OFF */
66module_param (disc_priv, bool, 0);
67MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))");
68
69MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>, GOTO Masanori <gotom@debian.or.jp>");
70MODULE_DESCRIPTION("Workbit NinjaSCSI-32Bi/UDE CardBus/PCI SCSI host bus adapter module");
71MODULE_LICENSE("GPL");
72
73static const char *nsp32_release_version = "1.2";
74
75
76/****************************************************************************
77 * Supported hardware
78 */
79static struct pci_device_id nsp32_pci_table[] = {
80 {
81 .vendor = PCI_VENDOR_ID_IODATA,
82 .device = PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II,
83 .subvendor = PCI_ANY_ID,
84 .subdevice = PCI_ANY_ID,
85 .driver_data = MODEL_IODATA,
86 },
87 {
88 .vendor = PCI_VENDOR_ID_WORKBIT,
89 .device = PCI_DEVICE_ID_NINJASCSI_32BI_KME,
90 .subvendor = PCI_ANY_ID,
91 .subdevice = PCI_ANY_ID,
92 .driver_data = MODEL_KME,
93 },
94 {
95 .vendor = PCI_VENDOR_ID_WORKBIT,
96 .device = PCI_DEVICE_ID_NINJASCSI_32BI_WBT,
97 .subvendor = PCI_ANY_ID,
98 .subdevice = PCI_ANY_ID,
99 .driver_data = MODEL_WORKBIT,
100 },
101 {
102 .vendor = PCI_VENDOR_ID_WORKBIT,
103 .device = PCI_DEVICE_ID_WORKBIT_STANDARD,
104 .subvendor = PCI_ANY_ID,
105 .subdevice = PCI_ANY_ID,
106 .driver_data = MODEL_PCI_WORKBIT,
107 },
108 {
109 .vendor = PCI_VENDOR_ID_WORKBIT,
110 .device = PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC,
111 .subvendor = PCI_ANY_ID,
112 .subdevice = PCI_ANY_ID,
113 .driver_data = MODEL_LOGITEC,
114 },
115 {
116 .vendor = PCI_VENDOR_ID_WORKBIT,
117 .device = PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC,
118 .subvendor = PCI_ANY_ID,
119 .subdevice = PCI_ANY_ID,
120 .driver_data = MODEL_PCI_LOGITEC,
121 },
122 {
123 .vendor = PCI_VENDOR_ID_WORKBIT,
124 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO,
125 .subvendor = PCI_ANY_ID,
126 .subdevice = PCI_ANY_ID,
127 .driver_data = MODEL_PCI_MELCO,
128 },
129 {
130 .vendor = PCI_VENDOR_ID_WORKBIT,
131 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II,
132 .subvendor = PCI_ANY_ID,
133 .subdevice = PCI_ANY_ID,
134 .driver_data = MODEL_PCI_MELCO,
135 },
136 {0,0,},
137};
138MODULE_DEVICE_TABLE(pci, nsp32_pci_table);
139
140static nsp32_hw_data nsp32_data_base; /* probe <-> detect glue */
141
142
143/*
144 * Period/AckWidth speed conversion table
145 *
146 * Note: This period/ackwidth speed table must be in descending order.
147 */
148static nsp32_sync_table nsp32_sync_table_40M[] = {
149 /* {PNo, AW, SP, EP, SREQ smpl} Speed(MB/s) Period AckWidth */
150 {0x1, 0, 0x0c, 0x0c, SMPL_40M}, /* 20.0 : 50ns, 25ns */
151 {0x2, 0, 0x0d, 0x18, SMPL_40M}, /* 13.3 : 75ns, 25ns */
152 {0x3, 1, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */
153 {0x4, 1, 0x1a, 0x1f, SMPL_20M}, /* 8.0 : 125ns, 50ns */
154 {0x5, 2, 0x20, 0x25, SMPL_20M}, /* 6.7 : 150ns, 75ns */
155 {0x6, 2, 0x26, 0x31, SMPL_20M}, /* 5.7 : 175ns, 75ns */
156 {0x7, 3, 0x32, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */
157 {0x8, 3, 0x33, 0x38, SMPL_10M}, /* 4.4 : 225ns, 100ns */
158 {0x9, 3, 0x39, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */
159};
160
161static nsp32_sync_table nsp32_sync_table_20M[] = {
162 {0x1, 0, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */
163 {0x2, 0, 0x1a, 0x25, SMPL_20M}, /* 6.7 : 150ns, 50ns */
164 {0x3, 1, 0x26, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */
165 {0x4, 1, 0x33, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */
166 {0x5, 2, 0x3f, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 150ns */
167 {0x6, 2, 0x4c, 0x57, SMPL_10M}, /* 2.8 : 350ns, 150ns */
168 {0x7, 3, 0x58, 0x64, SMPL_10M}, /* 2.5 : 400ns, 200ns */
169 {0x8, 3, 0x65, 0x70, SMPL_10M}, /* 2.2 : 450ns, 200ns */
170 {0x9, 3, 0x71, 0x7d, SMPL_10M}, /* 2.0 : 500ns, 200ns */
171};
172
173static nsp32_sync_table nsp32_sync_table_pci[] = {
174 {0x1, 0, 0x0c, 0x0f, SMPL_40M}, /* 16.6 : 60ns, 30ns */
175 {0x2, 0, 0x10, 0x16, SMPL_40M}, /* 11.1 : 90ns, 30ns */
176 {0x3, 1, 0x17, 0x1e, SMPL_20M}, /* 8.3 : 120ns, 60ns */
177 {0x4, 1, 0x1f, 0x25, SMPL_20M}, /* 6.7 : 150ns, 60ns */
178 {0x5, 2, 0x26, 0x2d, SMPL_20M}, /* 5.6 : 180ns, 90ns */
179 {0x6, 2, 0x2e, 0x34, SMPL_10M}, /* 4.8 : 210ns, 90ns */
180 {0x7, 3, 0x35, 0x3c, SMPL_10M}, /* 4.2 : 240ns, 120ns */
181 {0x8, 3, 0x3d, 0x43, SMPL_10M}, /* 3.7 : 270ns, 120ns */
182 {0x9, 3, 0x44, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 120ns */
183};
184
185/*
186 * function declaration
187 */
188/* module entry point */
189static int nsp32_probe (struct pci_dev *, const struct pci_device_id *);
190static void nsp32_remove(struct pci_dev *);
191static int __init init_nsp32 (void);
192static void __exit exit_nsp32 (void);
193
194/* struct struct scsi_host_template */
195static int nsp32_show_info (struct seq_file *, struct Scsi_Host *);
196
197static int nsp32_detect (struct pci_dev *pdev);
198static int nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
199static const char *nsp32_info (struct Scsi_Host *);
200static int nsp32_release (struct Scsi_Host *);
201
202/* SCSI error handler */
203static int nsp32_eh_abort (struct scsi_cmnd *);
204static int nsp32_eh_bus_reset (struct scsi_cmnd *);
205static int nsp32_eh_host_reset(struct scsi_cmnd *);
206
207/* generate SCSI message */
208static void nsp32_build_identify(struct scsi_cmnd *);
209static void nsp32_build_nop (struct scsi_cmnd *);
210static void nsp32_build_reject (struct scsi_cmnd *);
211static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char, unsigned char);
212
213/* SCSI message handler */
214static int nsp32_busfree_occur(struct scsi_cmnd *, unsigned short);
215static void nsp32_msgout_occur (struct scsi_cmnd *);
216static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long, unsigned short);
217
218static int nsp32_setup_sg_table (struct scsi_cmnd *);
219static int nsp32_selection_autopara(struct scsi_cmnd *);
220static int nsp32_selection_autoscsi(struct scsi_cmnd *);
221static void nsp32_scsi_done (struct scsi_cmnd *);
222static int nsp32_arbitration (struct scsi_cmnd *, unsigned int);
223static int nsp32_reselection (struct scsi_cmnd *, unsigned char);
224static void nsp32_adjust_busfree (struct scsi_cmnd *, unsigned int);
225static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short);
226
227/* SCSI SDTR */
228static void nsp32_analyze_sdtr (struct scsi_cmnd *);
229static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *, unsigned char);
230static void nsp32_set_async (nsp32_hw_data *, nsp32_target *);
231static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *, unsigned char *, unsigned char *);
232static void nsp32_set_sync_entry (nsp32_hw_data *, nsp32_target *, int, unsigned char);
233
234/* SCSI bus status handler */
235static void nsp32_wait_req (nsp32_hw_data *, int);
236static void nsp32_wait_sack (nsp32_hw_data *, int);
237static void nsp32_sack_assert (nsp32_hw_data *);
238static void nsp32_sack_negate (nsp32_hw_data *);
239static void nsp32_do_bus_reset(nsp32_hw_data *);
240
241/* hardware interrupt handler */
242static irqreturn_t do_nsp32_isr(int, void *);
243
244/* initialize hardware */
245static int nsp32hw_init(nsp32_hw_data *);
246
247/* EEPROM handler */
248static int nsp32_getprom_param (nsp32_hw_data *);
249static int nsp32_getprom_at24 (nsp32_hw_data *);
250static int nsp32_getprom_c16 (nsp32_hw_data *);
251static void nsp32_prom_start (nsp32_hw_data *);
252static void nsp32_prom_stop (nsp32_hw_data *);
253static int nsp32_prom_read (nsp32_hw_data *, int);
254static int nsp32_prom_read_bit (nsp32_hw_data *);
255static void nsp32_prom_write_bit(nsp32_hw_data *, int);
256static void nsp32_prom_set (nsp32_hw_data *, int, int);
257static int nsp32_prom_get (nsp32_hw_data *, int);
258
259/* debug/warning/info message */
260static void nsp32_message (const char *, int, char *, char *, ...);
261#ifdef NSP32_DEBUG
262static void nsp32_dmessage(const char *, int, int, char *, ...);
263#endif
264
265/*
266 * max_sectors is currently limited up to 128.
267 */
268static struct scsi_host_template nsp32_template = {
269 .proc_name = "nsp32",
270 .name = "Workbit NinjaSCSI-32Bi/UDE",
271 .show_info = nsp32_show_info,
272 .info = nsp32_info,
273 .queuecommand = nsp32_queuecommand,
274 .can_queue = 1,
275 .sg_tablesize = NSP32_SG_SIZE,
276 .max_sectors = 128,
277 .this_id = NSP32_HOST_SCSIID,
278 .use_clustering = DISABLE_CLUSTERING,
279 .eh_abort_handler = nsp32_eh_abort,
280 .eh_bus_reset_handler = nsp32_eh_bus_reset,
281 .eh_host_reset_handler = nsp32_eh_host_reset,
282/* .highmem_io = 1, */
283};
284
285#include "nsp32_io.h"
286
287/***********************************************************************
288 * debug, error print
289 */
290#ifndef NSP32_DEBUG
291# define NSP32_DEBUG_MASK 0x000000
292# define nsp32_msg(type, args...) nsp32_message ("", 0, (type), args)
293# define nsp32_dbg(mask, args...) /* */
294#else
295# define NSP32_DEBUG_MASK 0xffffff
296# define nsp32_msg(type, args...) \
297 nsp32_message (__func__, __LINE__, (type), args)
298# define nsp32_dbg(mask, args...) \
299 nsp32_dmessage(__func__, __LINE__, (mask), args)
300#endif
301
302#define NSP32_DEBUG_QUEUECOMMAND BIT(0)
303#define NSP32_DEBUG_REGISTER BIT(1)
304#define NSP32_DEBUG_AUTOSCSI BIT(2)
305#define NSP32_DEBUG_INTR BIT(3)
306#define NSP32_DEBUG_SGLIST BIT(4)
307#define NSP32_DEBUG_BUSFREE BIT(5)
308#define NSP32_DEBUG_CDB_CONTENTS BIT(6)
309#define NSP32_DEBUG_RESELECTION BIT(7)
310#define NSP32_DEBUG_MSGINOCCUR BIT(8)
311#define NSP32_DEBUG_EEPROM BIT(9)
312#define NSP32_DEBUG_MSGOUTOCCUR BIT(10)
313#define NSP32_DEBUG_BUSRESET BIT(11)
314#define NSP32_DEBUG_RESTART BIT(12)
315#define NSP32_DEBUG_SYNC BIT(13)
316#define NSP32_DEBUG_WAIT BIT(14)
317#define NSP32_DEBUG_TARGETFLAG BIT(15)
318#define NSP32_DEBUG_PROC BIT(16)
319#define NSP32_DEBUG_INIT BIT(17)
320#define NSP32_SPECIAL_PRINT_REGISTER BIT(20)
321
322#define NSP32_DEBUG_BUF_LEN 100
323
324static void nsp32_message(const char *func, int line, char *type, char *fmt, ...)
325{
326 va_list args;
327 char buf[NSP32_DEBUG_BUF_LEN];
328
329 va_start(args, fmt);
330 vsnprintf(buf, sizeof(buf), fmt, args);
331 va_end(args);
332
333#ifndef NSP32_DEBUG
334 printk("%snsp32: %s\n", type, buf);
335#else
336 printk("%snsp32: %s (%d): %s\n", type, func, line, buf);
337#endif
338}
339
340#ifdef NSP32_DEBUG
341static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...)
342{
343 va_list args;
344 char buf[NSP32_DEBUG_BUF_LEN];
345
346 va_start(args, fmt);
347 vsnprintf(buf, sizeof(buf), fmt, args);
348 va_end(args);
349
350 if (mask & NSP32_DEBUG_MASK) {
351 printk("nsp32-debug: 0x%x %s (%d): %s\n", mask, func, line, buf);
352 }
353}
354#endif
355
356#ifdef NSP32_DEBUG
357# include "nsp32_debug.c"
358#else
359# define show_command(arg) /* */
360# define show_busphase(arg) /* */
361# define show_autophase(arg) /* */
362#endif
363
364/*
365 * IDENTIFY Message
366 */
367static void nsp32_build_identify(struct scsi_cmnd *SCpnt)
368{
369 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
370 int pos = data->msgout_len;
371 int mode = FALSE;
372
373 /* XXX: Auto DiscPriv detection is progressing... */
374 if (disc_priv == 0) {
375 /* mode = TRUE; */
376 }
377
378 data->msgoutbuf[pos] = IDENTIFY(mode, SCpnt->device->lun); pos++;
379
380 data->msgout_len = pos;
381}
382
383/*
384 * SDTR Message Routine
385 */
386static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt,
387 unsigned char period,
388 unsigned char offset)
389{
390 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
391 int pos = data->msgout_len;
392
393 data->msgoutbuf[pos] = EXTENDED_MESSAGE; pos++;
394 data->msgoutbuf[pos] = EXTENDED_SDTR_LEN; pos++;
395 data->msgoutbuf[pos] = EXTENDED_SDTR; pos++;
396 data->msgoutbuf[pos] = period; pos++;
397 data->msgoutbuf[pos] = offset; pos++;
398
399 data->msgout_len = pos;
400}
401
402/*
403 * No Operation Message
404 */
405static void nsp32_build_nop(struct scsi_cmnd *SCpnt)
406{
407 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
408 int pos = data->msgout_len;
409
410 if (pos != 0) {
411 nsp32_msg(KERN_WARNING,
412 "Some messages are already contained!");
413 return;
414 }
415
416 data->msgoutbuf[pos] = NOP; pos++;
417 data->msgout_len = pos;
418}
419
420/*
421 * Reject Message
422 */
423static void nsp32_build_reject(struct scsi_cmnd *SCpnt)
424{
425 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
426 int pos = data->msgout_len;
427
428 data->msgoutbuf[pos] = MESSAGE_REJECT; pos++;
429 data->msgout_len = pos;
430}
431
432/*
433 * timer
434 */
435#if 0
436static void nsp32_start_timer(struct scsi_cmnd *SCpnt, int time)
437{
438 unsigned int base = SCpnt->host->io_port;
439
440 nsp32_dbg(NSP32_DEBUG_INTR, "timer=%d", time);
441
442 if (time & (~TIMER_CNT_MASK)) {
443 nsp32_dbg(NSP32_DEBUG_INTR, "timer set overflow");
444 }
445
446 nsp32_write2(base, TIMER_SET, time & TIMER_CNT_MASK);
447}
448#endif
449
450
451/*
452 * set SCSI command and other parameter to asic, and start selection phase
453 */
454static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
455{
456 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
457 unsigned int base = SCpnt->device->host->io_port;
458 unsigned int host_id = SCpnt->device->host->this_id;
459 unsigned char target = scmd_id(SCpnt);
460 nsp32_autoparam *param = data->autoparam;
461 unsigned char phase;
462 int i, ret;
463 unsigned int msgout;
464 u16_le s;
465
466 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
467
468 /*
469 * check bus free
470 */
471 phase = nsp32_read1(base, SCSI_BUS_MONITOR);
472 if (phase != BUSMON_BUS_FREE) {
473 nsp32_msg(KERN_WARNING, "bus busy");
474 show_busphase(phase & BUSMON_PHASE_MASK);
475 SCpnt->result = DID_BUS_BUSY << 16;
476 return FALSE;
477 }
478
479 /*
480 * message out
481 *
482 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout.
483 * over 3 messages needs another routine.
484 */
485 if (data->msgout_len == 0) {
486 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!");
487 SCpnt->result = DID_ERROR << 16;
488 return FALSE;
489 } else if (data->msgout_len > 0 && data->msgout_len <= 3) {
490 msgout = 0;
491 for (i = 0; i < data->msgout_len; i++) {
492 /*
493 * the sending order of the message is:
494 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2
495 * MCNT 2: MSG#1 -> MSG#2
496 * MCNT 1: MSG#2
497 */
498 msgout >>= 8;
499 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
500 }
501 msgout |= MV_VALID; /* MV valid */
502 msgout |= (unsigned int)data->msgout_len; /* len */
503 } else {
504 /* data->msgout_len > 3 */
505 msgout = 0;
506 }
507
508 // nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", nsp32_read2(base, SEL_TIME_OUT));
509 // nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
510
511 /*
512 * setup asic parameter
513 */
514 memset(param, 0, sizeof(nsp32_autoparam));
515
516 /* cdb */
517 for (i = 0; i < SCpnt->cmd_len; i++) {
518 param->cdb[4 * i] = SCpnt->cmnd[i];
519 }
520
521 /* outgoing messages */
522 param->msgout = cpu_to_le32(msgout);
523
524 /* syncreg, ackwidth, target id, SREQ sampling rate */
525 param->syncreg = data->cur_target->syncreg;
526 param->ackwidth = data->cur_target->ackwidth;
527 param->target_id = BIT(host_id) | BIT(target);
528 param->sample_reg = data->cur_target->sample_reg;
529
530 // nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "sample rate=0x%x\n", data->cur_target->sample_reg);
531
532 /* command control */
533 param->command_control = cpu_to_le16(CLEAR_CDB_FIFO_POINTER |
534 AUTOSCSI_START |
535 AUTO_MSGIN_00_OR_04 |
536 AUTO_MSGIN_02 |
537 AUTO_ATN );
538
539
540 /* transfer control */
541 s = 0;
542 switch (data->trans_method) {
543 case NSP32_TRANSFER_BUSMASTER:
544 s |= BM_START;
545 break;
546 case NSP32_TRANSFER_MMIO:
547 s |= CB_MMIO_MODE;
548 break;
549 case NSP32_TRANSFER_PIO:
550 s |= CB_IO_MODE;
551 break;
552 default:
553 nsp32_msg(KERN_ERR, "unknown trans_method");
554 break;
555 }
556 /*
557 * OR-ed BLIEND_MODE, FIFO intr is decreased, instead of PCI bus waits.
558 * For bus master transfer, it's taken off.
559 */
560 s |= (TRANSFER_GO | ALL_COUNTER_CLR);
561 param->transfer_control = cpu_to_le16(s);
562
563 /* sg table addr */
564 param->sgt_pointer = cpu_to_le32(data->cur_lunt->sglun_paddr);
565
566 /*
567 * transfer parameter to ASIC
568 */
569 nsp32_write4(base, SGT_ADR, data->auto_paddr);
570 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER |
571 AUTO_PARAMETER );
572
573 /*
574 * Check arbitration
575 */
576 ret = nsp32_arbitration(SCpnt, base);
577
578 return ret;
579}
580
581
582/*
583 * Selection with AUTO SCSI (without AUTO PARAMETER)
584 */
585static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
586{
587 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
588 unsigned int base = SCpnt->device->host->io_port;
589 unsigned int host_id = SCpnt->device->host->this_id;
590 unsigned char target = scmd_id(SCpnt);
591 unsigned char phase;
592 int status;
593 unsigned short command = 0;
594 unsigned int msgout = 0;
595 unsigned short execph;
596 int i;
597
598 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
599
600 /*
601 * IRQ disable
602 */
603 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
604
605 /*
606 * check bus line
607 */
608 phase = nsp32_read1(base, SCSI_BUS_MONITOR);
609 if(((phase & BUSMON_BSY) == 1) || (phase & BUSMON_SEL) == 1) {
610 nsp32_msg(KERN_WARNING, "bus busy");
611 SCpnt->result = DID_BUS_BUSY << 16;
612 status = 1;
613 goto out;
614 }
615
616 /*
617 * clear execph
618 */
619 execph = nsp32_read2(base, SCSI_EXECUTE_PHASE);
620
621 /*
622 * clear FIFO counter to set CDBs
623 */
624 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER);
625
626 /*
627 * set CDB0 - CDB15
628 */
629 for (i = 0; i < SCpnt->cmd_len; i++) {
630 nsp32_write1(base, COMMAND_DATA, SCpnt->cmnd[i]);
631 }
632 nsp32_dbg(NSP32_DEBUG_CDB_CONTENTS, "CDB[0]=[0x%x]", SCpnt->cmnd[0]);
633
634 /*
635 * set SCSIOUT LATCH(initiator)/TARGET(target) (OR-ed) ID
636 */
637 nsp32_write1(base, SCSI_OUT_LATCH_TARGET_ID, BIT(host_id) | BIT(target));
638
639 /*
640 * set SCSI MSGOUT REG
641 *
642 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout.
643 * over 3 messages needs another routine.
644 */
645 if (data->msgout_len == 0) {
646 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!");
647 SCpnt->result = DID_ERROR << 16;
648 status = 1;
649 goto out;
650 } else if (data->msgout_len > 0 && data->msgout_len <= 3) {
651 msgout = 0;
652 for (i = 0; i < data->msgout_len; i++) {
653 /*
654 * the sending order of the message is:
655 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2
656 * MCNT 2: MSG#1 -> MSG#2
657 * MCNT 1: MSG#2
658 */
659 msgout >>= 8;
660 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
661 }
662 msgout |= MV_VALID; /* MV valid */
663 msgout |= (unsigned int)data->msgout_len; /* len */
664 nsp32_write4(base, SCSI_MSG_OUT, msgout);
665 } else {
666 /* data->msgout_len > 3 */
667 nsp32_write4(base, SCSI_MSG_OUT, 0);
668 }
669
670 /*
671 * set selection timeout(= 250ms)
672 */
673 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
674
675 /*
676 * set SREQ hazard killer sampling rate
677 *
678 * TODO: sample_rate (BASE+0F) is 0 when internal clock = 40MHz.
679 * check other internal clock!
680 */
681 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg);
682
683 /*
684 * clear Arbit
685 */
686 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR);
687
688 /*
689 * set SYNCREG
690 * Don't set BM_START_ADR before setting this register.
691 */
692 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg);
693
694 /*
695 * set ACKWIDTH
696 */
697 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth);
698
699 nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
700 "syncreg=0x%x, ackwidth=0x%x, sgtpaddr=0x%x, id=0x%x",
701 nsp32_read1(base, SYNC_REG), nsp32_read1(base, ACK_WIDTH),
702 nsp32_read4(base, SGT_ADR), nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID));
703 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "msgout_len=%d, msgout=0x%x",
704 data->msgout_len, msgout);
705
706 /*
707 * set SGT ADDR (physical address)
708 */
709 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr);
710
711 /*
712 * set TRANSFER CONTROL REG
713 */
714 command = 0;
715 command |= (TRANSFER_GO | ALL_COUNTER_CLR);
716 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
717 if (scsi_bufflen(SCpnt) > 0) {
718 command |= BM_START;
719 }
720 } else if (data->trans_method & NSP32_TRANSFER_MMIO) {
721 command |= CB_MMIO_MODE;
722 } else if (data->trans_method & NSP32_TRANSFER_PIO) {
723 command |= CB_IO_MODE;
724 }
725 nsp32_write2(base, TRANSFER_CONTROL, command);
726
727 /*
728 * start AUTO SCSI, kick off arbitration
729 */
730 command = (CLEAR_CDB_FIFO_POINTER |
731 AUTOSCSI_START |
732 AUTO_MSGIN_00_OR_04 |
733 AUTO_MSGIN_02 |
734 AUTO_ATN );
735 nsp32_write2(base, COMMAND_CONTROL, command);
736
737 /*
738 * Check arbitration
739 */
740 status = nsp32_arbitration(SCpnt, base);
741
742 out:
743 /*
744 * IRQ enable
745 */
746 nsp32_write2(base, IRQ_CONTROL, 0);
747
748 return status;
749}
750
751
752/*
753 * Arbitration Status Check
754 *
755 * Note: Arbitration counter is waited during ARBIT_GO is not lifting.
756 * Using udelay(1) consumes CPU time and system time, but
757 * arbitration delay time is defined minimal 2.4us in SCSI
758 * specification, thus udelay works as coarse grained wait timer.
759 */
760static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base)
761{
762 unsigned char arbit;
763 int status = TRUE;
764 int time = 0;
765
766 do {
767 arbit = nsp32_read1(base, ARBIT_STATUS);
768 time++;
769 } while ((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 &&
770 (time <= ARBIT_TIMEOUT_TIME));
771
772 nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
773 "arbit: 0x%x, delay time: %d", arbit, time);
774
775 if (arbit & ARBIT_WIN) {
776 /* Arbitration succeeded */
777 SCpnt->result = DID_OK << 16;
778 nsp32_index_write1(base, EXT_PORT, LED_ON); /* PCI LED on */
779 } else if (arbit & ARBIT_FAIL) {
780 /* Arbitration failed */
781 SCpnt->result = DID_BUS_BUSY << 16;
782 status = FALSE;
783 } else {
784 /*
785 * unknown error or ARBIT_GO timeout,
786 * something lock up! guess no connection.
787 */
788 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "arbit timeout");
789 SCpnt->result = DID_NO_CONNECT << 16;
790 status = FALSE;
791 }
792
793 /*
794 * clear Arbit
795 */
796 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR);
797
798 return status;
799}
800
801
802/*
803 * reselection
804 *
805 * Note: This reselection routine is called from msgin_occur,
806 * reselection target id&lun must be already set.
807 * SCSI-2 says IDENTIFY implies RESTORE_POINTER operation.
808 */
809static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun)
810{
811 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
812 unsigned int host_id = SCpnt->device->host->this_id;
813 unsigned int base = SCpnt->device->host->io_port;
814 unsigned char tmpid, newid;
815
816 nsp32_dbg(NSP32_DEBUG_RESELECTION, "enter");
817
818 /*
819 * calculate reselected SCSI ID
820 */
821 tmpid = nsp32_read1(base, RESELECT_ID);
822 tmpid &= (~BIT(host_id));
823 newid = 0;
824 while (tmpid) {
825 if (tmpid & 1) {
826 break;
827 }
828 tmpid >>= 1;
829 newid++;
830 }
831
832 /*
833 * If reselected New ID:LUN is not existed
834 * or current nexus is not existed, unexpected
835 * reselection is occurred. Send reject message.
836 */
837 if (newid >= ARRAY_SIZE(data->lunt) || newlun >= ARRAY_SIZE(data->lunt[0])) {
838 nsp32_msg(KERN_WARNING, "unknown id/lun");
839 return FALSE;
840 } else if(data->lunt[newid][newlun].SCpnt == NULL) {
841 nsp32_msg(KERN_WARNING, "no SCSI command is processing");
842 return FALSE;
843 }
844
845 data->cur_id = newid;
846 data->cur_lun = newlun;
847 data->cur_target = &(data->target[newid]);
848 data->cur_lunt = &(data->lunt[newid][newlun]);
849
850 /* reset SACK/SavedACK counter (or ALL clear?) */
851 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
852
853 return TRUE;
854}
855
856
857/*
858 * nsp32_setup_sg_table - build scatter gather list for transfer data
859 * with bus master.
860 *
861 * Note: NinjaSCSI-32Bi/UDE bus master can not transfer over 64KB at a time.
862 */
863static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
864{
865 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
866 struct scatterlist *sg;
867 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
868 int num, i;
869 u32_le l;
870
871 if (sgt == NULL) {
872 nsp32_dbg(NSP32_DEBUG_SGLIST, "SGT == null");
873 return FALSE;
874 }
875
876 num = scsi_dma_map(SCpnt);
877 if (!num)
878 return TRUE;
879 else if (num < 0)
880 return FALSE;
881 else {
882 scsi_for_each_sg(SCpnt, sg, num, i) {
883 /*
884 * Build nsp32_sglist, substitute sg dma addresses.
885 */
886 sgt[i].addr = cpu_to_le32(sg_dma_address(sg));
887 sgt[i].len = cpu_to_le32(sg_dma_len(sg));
888
889 if (le32_to_cpu(sgt[i].len) > 0x10000) {
890 nsp32_msg(KERN_ERR,
891 "can't transfer over 64KB at a time, size=0x%lx", le32_to_cpu(sgt[i].len));
892 return FALSE;
893 }
894 nsp32_dbg(NSP32_DEBUG_SGLIST,
895 "num 0x%x : addr 0x%lx len 0x%lx",
896 i,
897 le32_to_cpu(sgt[i].addr),
898 le32_to_cpu(sgt[i].len ));
899 }
900
901 /* set end mark */
902 l = le32_to_cpu(sgt[num-1].len);
903 sgt[num-1].len = cpu_to_le32(l | SGTEND);
904 }
905
906 return TRUE;
907}
908
909static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
910{
911 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
912 nsp32_target *target;
913 nsp32_lunt *cur_lunt;
914 int ret;
915
916 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
917 "enter. target: 0x%x LUN: 0x%llx cmnd: 0x%x cmndlen: 0x%x "
918 "use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x",
919 SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len,
920 scsi_sg_count(SCpnt), scsi_sglist(SCpnt), scsi_bufflen(SCpnt));
921
922 if (data->CurrentSC != NULL) {
923 nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request");
924 data->CurrentSC = NULL;
925 SCpnt->result = DID_NO_CONNECT << 16;
926 done(SCpnt);
927 return 0;
928 }
929
930 /* check target ID is not same as this initiator ID */
931 if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
932 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "target==host???");
933 SCpnt->result = DID_BAD_TARGET << 16;
934 done(SCpnt);
935 return 0;
936 }
937
938 /* check target LUN is allowable value */
939 if (SCpnt->device->lun >= MAX_LUN) {
940 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "no more lun");
941 SCpnt->result = DID_BAD_TARGET << 16;
942 done(SCpnt);
943 return 0;
944 }
945
946 show_command(SCpnt);
947
948 SCpnt->scsi_done = done;
949 data->CurrentSC = SCpnt;
950 SCpnt->SCp.Status = CHECK_CONDITION;
951 SCpnt->SCp.Message = 0;
952 scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
953
954 SCpnt->SCp.ptr = (char *)scsi_sglist(SCpnt);
955 SCpnt->SCp.this_residual = scsi_bufflen(SCpnt);
956 SCpnt->SCp.buffer = NULL;
957 SCpnt->SCp.buffers_residual = 0;
958
959 /* initialize data */
960 data->msgout_len = 0;
961 data->msgin_len = 0;
962 cur_lunt = &(data->lunt[SCpnt->device->id][SCpnt->device->lun]);
963 cur_lunt->SCpnt = SCpnt;
964 cur_lunt->save_datp = 0;
965 cur_lunt->msgin03 = FALSE;
966 data->cur_lunt = cur_lunt;
967 data->cur_id = SCpnt->device->id;
968 data->cur_lun = SCpnt->device->lun;
969
970 ret = nsp32_setup_sg_table(SCpnt);
971 if (ret == FALSE) {
972 nsp32_msg(KERN_ERR, "SGT fail");
973 SCpnt->result = DID_ERROR << 16;
974 nsp32_scsi_done(SCpnt);
975 return 0;
976 }
977
978 /* Build IDENTIFY */
979 nsp32_build_identify(SCpnt);
980
981 /*
982 * If target is the first time to transfer after the reset
983 * (target don't have SDTR_DONE and SDTR_INITIATOR), sync
984 * message SDTR is needed to do synchronous transfer.
985 */
986 target = &data->target[scmd_id(SCpnt)];
987 data->cur_target = target;
988
989 if (!(target->sync_flag & (SDTR_DONE | SDTR_INITIATOR | SDTR_TARGET))) {
990 unsigned char period, offset;
991
992 if (trans_mode != ASYNC_MODE) {
993 nsp32_set_max_sync(data, target, &period, &offset);
994 nsp32_build_sdtr(SCpnt, period, offset);
995 target->sync_flag |= SDTR_INITIATOR;
996 } else {
997 nsp32_set_async(data, target);
998 target->sync_flag |= SDTR_DONE;
999 }
1000
1001 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1002 "SDTR: entry: %d start_period: 0x%x offset: 0x%x\n",
1003 target->limit_entry, period, offset);
1004 } else if (target->sync_flag & SDTR_INITIATOR) {
1005 /*
1006 * It was negotiating SDTR with target, sending from the
1007 * initiator, but there are no chance to remove this flag.
1008 * Set async because we don't get proper negotiation.
1009 */
1010 nsp32_set_async(data, target);
1011 target->sync_flag &= ~SDTR_INITIATOR;
1012 target->sync_flag |= SDTR_DONE;
1013
1014 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1015 "SDTR_INITIATOR: fall back to async");
1016 } else if (target->sync_flag & SDTR_TARGET) {
1017 /*
1018 * It was negotiating SDTR with target, sending from target,
1019 * but there are no chance to remove this flag. Set async
1020 * because we don't get proper negotiation.
1021 */
1022 nsp32_set_async(data, target);
1023 target->sync_flag &= ~SDTR_TARGET;
1024 target->sync_flag |= SDTR_DONE;
1025
1026 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
1027 "Unknown SDTR from target is reached, fall back to async.");
1028 }
1029
1030 nsp32_dbg(NSP32_DEBUG_TARGETFLAG,
1031 "target: %d sync_flag: 0x%x syncreg: 0x%x ackwidth: 0x%x",
1032 SCpnt->device->id, target->sync_flag, target->syncreg,
1033 target->ackwidth);
1034
1035 /* Selection */
1036 if (auto_param == 0) {
1037 ret = nsp32_selection_autopara(SCpnt);
1038 } else {
1039 ret = nsp32_selection_autoscsi(SCpnt);
1040 }
1041
1042 if (ret != TRUE) {
1043 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "selection fail");
1044 nsp32_scsi_done(SCpnt);
1045 }
1046
1047 return 0;
1048}
1049
1050static DEF_SCSI_QCMD(nsp32_queuecommand)
1051
1052/* initialize asic */
1053static int nsp32hw_init(nsp32_hw_data *data)
1054{
1055 unsigned int base = data->BaseAddress;
1056 unsigned short irq_stat;
1057 unsigned long lc_reg;
1058 unsigned char power;
1059
1060 lc_reg = nsp32_index_read4(base, CFG_LATE_CACHE);
1061 if ((lc_reg & 0xff00) == 0) {
1062 lc_reg |= (0x20 << 8);
1063 nsp32_index_write2(base, CFG_LATE_CACHE, lc_reg & 0xffff);
1064 }
1065
1066 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
1067 nsp32_write2(base, TRANSFER_CONTROL, 0);
1068 nsp32_write4(base, BM_CNT, 0);
1069 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
1070
1071 do {
1072 irq_stat = nsp32_read2(base, IRQ_STATUS);
1073 nsp32_dbg(NSP32_DEBUG_INIT, "irq_stat 0x%x", irq_stat);
1074 } while (irq_stat & IRQSTATUS_ANY_IRQ);
1075
1076 /*
1077 * Fill FIFO_FULL_SHLD, FIFO_EMPTY_SHLD. Below parameter is
1078 * designated by specification.
1079 */
1080 if ((data->trans_method & NSP32_TRANSFER_PIO) ||
1081 (data->trans_method & NSP32_TRANSFER_MMIO)) {
1082 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x40);
1083 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x40);
1084 } else if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
1085 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x10);
1086 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x60);
1087 } else {
1088 nsp32_dbg(NSP32_DEBUG_INIT, "unknown transfer mode");
1089 }
1090
1091 nsp32_dbg(NSP32_DEBUG_INIT, "full 0x%x emp 0x%x",
1092 nsp32_index_read1(base, FIFO_FULL_SHLD_COUNT),
1093 nsp32_index_read1(base, FIFO_EMPTY_SHLD_COUNT));
1094
1095 nsp32_index_write1(base, CLOCK_DIV, data->clock);
1096 nsp32_index_write1(base, BM_CYCLE, MEMRD_CMD1 | SGT_AUTO_PARA_MEMED_CMD);
1097 nsp32_write1(base, PARITY_CONTROL, 0); /* parity check is disable */
1098
1099 /*
1100 * initialize MISC_WRRD register
1101 *
1102 * Note: Designated parameters is obeyed as following:
1103 * MISC_SCSI_DIRECTION_DETECTOR_SELECT: It must be set.
1104 * MISC_MASTER_TERMINATION_SELECT: It must be set.
1105 * MISC_BMREQ_NEGATE_TIMING_SEL: It should be set.
1106 * MISC_AUTOSEL_TIMING_SEL: It should be set.
1107 * MISC_BMSTOP_CHANGE2_NONDATA_PHASE: It should be set.
1108 * MISC_DELAYED_BMSTART: It's selected for safety.
1109 *
1110 * Note: If MISC_BMSTOP_CHANGE2_NONDATA_PHASE is set, then
1111 * we have to set TRANSFERCONTROL_BM_START as 0 and set
1112 * appropriate value before restarting bus master transfer.
1113 */
1114 nsp32_index_write2(base, MISC_WR,
1115 (SCSI_DIRECTION_DETECTOR_SELECT |
1116 DELAYED_BMSTART |
1117 MASTER_TERMINATION_SELECT |
1118 BMREQ_NEGATE_TIMING_SEL |
1119 AUTOSEL_TIMING_SEL |
1120 BMSTOP_CHANGE2_NONDATA_PHASE));
1121
1122 nsp32_index_write1(base, TERM_PWR_CONTROL, 0);
1123 power = nsp32_index_read1(base, TERM_PWR_CONTROL);
1124 if (!(power & SENSE)) {
1125 nsp32_msg(KERN_INFO, "term power on");
1126 nsp32_index_write1(base, TERM_PWR_CONTROL, BPWR);
1127 }
1128
1129 nsp32_write2(base, TIMER_SET, TIMER_STOP);
1130 nsp32_write2(base, TIMER_SET, TIMER_STOP); /* Required 2 times */
1131
1132 nsp32_write1(base, SYNC_REG, 0);
1133 nsp32_write1(base, ACK_WIDTH, 0);
1134 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
1135
1136 /*
1137 * enable to select designated IRQ (except for
1138 * IRQSELECT_SERR, IRQSELECT_PERR, IRQSELECT_BMCNTERR)
1139 */
1140 nsp32_index_write2(base, IRQ_SELECT, IRQSELECT_TIMER_IRQ |
1141 IRQSELECT_SCSIRESET_IRQ |
1142 IRQSELECT_FIFO_SHLD_IRQ |
1143 IRQSELECT_RESELECT_IRQ |
1144 IRQSELECT_PHASE_CHANGE_IRQ |
1145 IRQSELECT_AUTO_SCSI_SEQ_IRQ |
1146 // IRQSELECT_BMCNTERR_IRQ |
1147 IRQSELECT_TARGET_ABORT_IRQ |
1148 IRQSELECT_MASTER_ABORT_IRQ );
1149 nsp32_write2(base, IRQ_CONTROL, 0);
1150
1151 /* PCI LED off */
1152 nsp32_index_write1(base, EXT_PORT_DDR, LED_OFF);
1153 nsp32_index_write1(base, EXT_PORT, LED_OFF);
1154
1155 return TRUE;
1156}
1157
1158
1159/* interrupt routine */
1160static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
1161{
1162 nsp32_hw_data *data = dev_id;
1163 unsigned int base = data->BaseAddress;
1164 struct scsi_cmnd *SCpnt = data->CurrentSC;
1165 unsigned short auto_stat, irq_stat, trans_stat;
1166 unsigned char busmon, busphase;
1167 unsigned long flags;
1168 int ret;
1169 int handled = 0;
1170 struct Scsi_Host *host = data->Host;
1171
1172 spin_lock_irqsave(host->host_lock, flags);
1173
1174 /*
1175 * IRQ check, then enable IRQ mask
1176 */
1177 irq_stat = nsp32_read2(base, IRQ_STATUS);
1178 nsp32_dbg(NSP32_DEBUG_INTR,
1179 "enter IRQ: %d, IRQstatus: 0x%x", irq, irq_stat);
1180 /* is this interrupt comes from Ninja asic? */
1181 if ((irq_stat & IRQSTATUS_ANY_IRQ) == 0) {
1182 nsp32_dbg(NSP32_DEBUG_INTR, "shared interrupt: irq other 0x%x", irq_stat);
1183 goto out2;
1184 }
1185 handled = 1;
1186 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
1187
1188 busmon = nsp32_read1(base, SCSI_BUS_MONITOR);
1189 busphase = busmon & BUSMON_PHASE_MASK;
1190
1191 trans_stat = nsp32_read2(base, TRANSFER_STATUS);
1192 if ((irq_stat == 0xffff) && (trans_stat == 0xffff)) {
1193 nsp32_msg(KERN_INFO, "card disconnect");
1194 if (data->CurrentSC != NULL) {
1195 nsp32_msg(KERN_INFO, "clean up current SCSI command");
1196 SCpnt->result = DID_BAD_TARGET << 16;
1197 nsp32_scsi_done(SCpnt);
1198 }
1199 goto out;
1200 }
1201
1202 /* Timer IRQ */
1203 if (irq_stat & IRQSTATUS_TIMER_IRQ) {
1204 nsp32_dbg(NSP32_DEBUG_INTR, "timer stop");
1205 nsp32_write2(base, TIMER_SET, TIMER_STOP);
1206 goto out;
1207 }
1208
1209 /* SCSI reset */
1210 if (irq_stat & IRQSTATUS_SCSIRESET_IRQ) {
1211 nsp32_msg(KERN_INFO, "detected someone do bus reset");
1212 nsp32_do_bus_reset(data);
1213 if (SCpnt != NULL) {
1214 SCpnt->result = DID_RESET << 16;
1215 nsp32_scsi_done(SCpnt);
1216 }
1217 goto out;
1218 }
1219
1220 if (SCpnt == NULL) {
1221 nsp32_msg(KERN_WARNING, "SCpnt==NULL this can't be happened");
1222 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1223 goto out;
1224 }
1225
1226 /*
1227 * AutoSCSI Interrupt.
1228 * Note: This interrupt is occurred when AutoSCSI is finished. Then
1229 * check SCSIEXECUTEPHASE, and do appropriate action. Each phases are
1230 * recorded when AutoSCSI sequencer has been processed.
1231 */
1232 if(irq_stat & IRQSTATUS_AUTOSCSI_IRQ) {
1233 /* getting SCSI executed phase */
1234 auto_stat = nsp32_read2(base, SCSI_EXECUTE_PHASE);
1235 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
1236
1237 /* Selection Timeout, go busfree phase. */
1238 if (auto_stat & SELECTION_TIMEOUT) {
1239 nsp32_dbg(NSP32_DEBUG_INTR,
1240 "selection timeout occurred");
1241
1242 SCpnt->result = DID_TIME_OUT << 16;
1243 nsp32_scsi_done(SCpnt);
1244 goto out;
1245 }
1246
1247 if (auto_stat & MSGOUT_PHASE) {
1248 /*
1249 * MsgOut phase was processed.
1250 * If MSG_IN_OCCUER is not set, then MsgOut phase is
1251 * completed. Thus, msgout_len must reset. Otherwise,
1252 * nothing to do here. If MSG_OUT_OCCUER is occurred,
1253 * then we will encounter the condition and check.
1254 */
1255 if (!(auto_stat & MSG_IN_OCCUER) &&
1256 (data->msgout_len <= 3)) {
1257 /*
1258 * !MSG_IN_OCCUER && msgout_len <=3
1259 * ---> AutoSCSI with MSGOUTreg is processed.
1260 */
1261 data->msgout_len = 0;
1262 };
1263
1264 nsp32_dbg(NSP32_DEBUG_INTR, "MsgOut phase processed");
1265 }
1266
1267 if ((auto_stat & DATA_IN_PHASE) &&
1268 (scsi_get_resid(SCpnt) > 0) &&
1269 ((nsp32_read2(base, FIFO_REST_CNT) & FIFO_REST_MASK) != 0)) {
1270 printk( "auto+fifo\n");
1271 //nsp32_pio_read(SCpnt);
1272 }
1273
1274 if (auto_stat & (DATA_IN_PHASE | DATA_OUT_PHASE)) {
1275 /* DATA_IN_PHASE/DATA_OUT_PHASE was processed. */
1276 nsp32_dbg(NSP32_DEBUG_INTR,
1277 "Data in/out phase processed");
1278
1279 /* read BMCNT, SGT pointer addr */
1280 nsp32_dbg(NSP32_DEBUG_INTR, "BMCNT=0x%lx",
1281 nsp32_read4(base, BM_CNT));
1282 nsp32_dbg(NSP32_DEBUG_INTR, "addr=0x%lx",
1283 nsp32_read4(base, SGT_ADR));
1284 nsp32_dbg(NSP32_DEBUG_INTR, "SACK=0x%lx",
1285 nsp32_read4(base, SACK_CNT));
1286 nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx",
1287 nsp32_read4(base, SAVED_SACK_CNT));
1288
1289 scsi_set_resid(SCpnt, 0); /* all data transferred! */
1290 }
1291
1292 /*
1293 * MsgIn Occur
1294 */
1295 if (auto_stat & MSG_IN_OCCUER) {
1296 nsp32_msgin_occur(SCpnt, irq_stat, auto_stat);
1297 }
1298
1299 /*
1300 * MsgOut Occur
1301 */
1302 if (auto_stat & MSG_OUT_OCCUER) {
1303 nsp32_msgout_occur(SCpnt);
1304 }
1305
1306 /*
1307 * Bus Free Occur
1308 */
1309 if (auto_stat & BUS_FREE_OCCUER) {
1310 ret = nsp32_busfree_occur(SCpnt, auto_stat);
1311 if (ret == TRUE) {
1312 goto out;
1313 }
1314 }
1315
1316 if (auto_stat & STATUS_PHASE) {
1317 /*
1318 * Read CSB and substitute CSB for SCpnt->result
1319 * to save status phase stutas byte.
1320 * scsi error handler checks host_byte (DID_*:
1321 * low level driver to indicate status), then checks
1322 * status_byte (SCSI status byte).
1323 */
1324 SCpnt->result = (int)nsp32_read1(base, SCSI_CSB_IN);
1325 }
1326
1327 if (auto_stat & ILLEGAL_PHASE) {
1328 /* Illegal phase is detected. SACK is not back. */
1329 nsp32_msg(KERN_WARNING,
1330 "AUTO SCSI ILLEGAL PHASE OCCUR!!!!");
1331
1332 /* TODO: currently we don't have any action... bus reset? */
1333
1334 /*
1335 * To send back SACK, assert, wait, and negate.
1336 */
1337 nsp32_sack_assert(data);
1338 nsp32_wait_req(data, NEGATE);
1339 nsp32_sack_negate(data);
1340
1341 }
1342
1343 if (auto_stat & COMMAND_PHASE) {
1344 /* nothing to do */
1345 nsp32_dbg(NSP32_DEBUG_INTR, "Command phase processed");
1346 }
1347
1348 if (auto_stat & AUTOSCSI_BUSY) {
1349 /* AutoSCSI is running */
1350 }
1351
1352 show_autophase(auto_stat);
1353 }
1354
1355 /* FIFO_SHLD_IRQ */
1356 if (irq_stat & IRQSTATUS_FIFO_SHLD_IRQ) {
1357 nsp32_dbg(NSP32_DEBUG_INTR, "FIFO IRQ");
1358
1359 switch(busphase) {
1360 case BUSPHASE_DATA_OUT:
1361 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/write");
1362
1363 //nsp32_pio_write(SCpnt);
1364
1365 break;
1366
1367 case BUSPHASE_DATA_IN:
1368 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/read");
1369
1370 //nsp32_pio_read(SCpnt);
1371
1372 break;
1373
1374 case BUSPHASE_STATUS:
1375 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/status");
1376
1377 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1378
1379 break;
1380 default:
1381 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/other phase");
1382 nsp32_dbg(NSP32_DEBUG_INTR, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1383 show_busphase(busphase);
1384 break;
1385 }
1386
1387 goto out;
1388 }
1389
1390 /* Phase Change IRQ */
1391 if (irq_stat & IRQSTATUS_PHASE_CHANGE_IRQ) {
1392 nsp32_dbg(NSP32_DEBUG_INTR, "phase change IRQ");
1393
1394 switch(busphase) {
1395 case BUSPHASE_MESSAGE_IN:
1396 nsp32_dbg(NSP32_DEBUG_INTR, "phase chg/msg in");
1397 nsp32_msgin_occur(SCpnt, irq_stat, 0);
1398 break;
1399 default:
1400 nsp32_msg(KERN_WARNING, "phase chg/other phase?");
1401 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x\n",
1402 irq_stat, trans_stat);
1403 show_busphase(busphase);
1404 break;
1405 }
1406 goto out;
1407 }
1408
1409 /* PCI_IRQ */
1410 if (irq_stat & IRQSTATUS_PCI_IRQ) {
1411 nsp32_dbg(NSP32_DEBUG_INTR, "PCI IRQ occurred");
1412 /* Do nothing */
1413 }
1414
1415 /* BMCNTERR_IRQ */
1416 if (irq_stat & IRQSTATUS_BMCNTERR_IRQ) {
1417 nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
1418 /*
1419 * TODO: To be implemented improving bus master
1420 * transfer reliability when BMCNTERR is occurred in
1421 * AutoSCSI phase described in specification.
1422 */
1423 }
1424
1425#if 0
1426 nsp32_dbg(NSP32_DEBUG_INTR,
1427 "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
1428 show_busphase(busphase);
1429#endif
1430
1431 out:
1432 /* disable IRQ mask */
1433 nsp32_write2(base, IRQ_CONTROL, 0);
1434
1435 out2:
1436 spin_unlock_irqrestore(host->host_lock, flags);
1437
1438 nsp32_dbg(NSP32_DEBUG_INTR, "exit");
1439
1440 return IRQ_RETVAL(handled);
1441}
1442
1443
1444static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
1445{
1446 unsigned long flags;
1447 nsp32_hw_data *data;
1448 int hostno;
1449 unsigned int base;
1450 unsigned char mode_reg;
1451 int id, speed;
1452 long model;
1453
1454 hostno = host->host_no;
1455 data = (nsp32_hw_data *)host->hostdata;
1456 base = host->io_port;
1457
1458 seq_puts(m, "NinjaSCSI-32 status\n\n");
1459 seq_printf(m, "Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
1460 seq_printf(m, "SCSI host No.: %d\n", hostno);
1461 seq_printf(m, "IRQ: %d\n", host->irq);
1462 seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
1463 seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
1464 seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize);
1465 seq_printf(m, "Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
1466
1467 mode_reg = nsp32_index_read1(base, CHIP_MODE);
1468 model = data->pci_devid->driver_data;
1469
1470#ifdef CONFIG_PM
1471 seq_printf(m, "Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
1472#endif
1473 seq_printf(m, "OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
1474
1475 spin_lock_irqsave(&(data->Lock), flags);
1476 seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
1477 spin_unlock_irqrestore(&(data->Lock), flags);
1478
1479
1480 seq_puts(m, "SDTR status\n");
1481 for (id = 0; id < ARRAY_SIZE(data->target); id++) {
1482
1483 seq_printf(m, "id %d: ", id);
1484
1485 if (id == host->this_id) {
1486 seq_puts(m, "----- NinjaSCSI-32 host adapter\n");
1487 continue;
1488 }
1489
1490 if (data->target[id].sync_flag == SDTR_DONE) {
1491 if (data->target[id].period == 0 &&
1492 data->target[id].offset == ASYNC_OFFSET ) {
1493 seq_puts(m, "async");
1494 } else {
1495 seq_puts(m, " sync");
1496 }
1497 } else {
1498 seq_puts(m, " none");
1499 }
1500
1501 if (data->target[id].period != 0) {
1502
1503 speed = 1000000 / (data->target[id].period * 4);
1504
1505 seq_printf(m, " transfer %d.%dMB/s, offset %d",
1506 speed / 1000,
1507 speed % 1000,
1508 data->target[id].offset
1509 );
1510 }
1511 seq_putc(m, '\n');
1512 }
1513 return 0;
1514}
1515
1516
1517
1518/*
1519 * Reset parameters and call scsi_done for data->cur_lunt.
1520 * Be careful setting SCpnt->result = DID_* before calling this function.
1521 */
1522static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
1523{
1524 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1525 unsigned int base = SCpnt->device->host->io_port;
1526
1527 scsi_dma_unmap(SCpnt);
1528
1529 /*
1530 * clear TRANSFERCONTROL_BM_START
1531 */
1532 nsp32_write2(base, TRANSFER_CONTROL, 0);
1533 nsp32_write4(base, BM_CNT, 0);
1534
1535 /*
1536 * call scsi_done
1537 */
1538 (*SCpnt->scsi_done)(SCpnt);
1539
1540 /*
1541 * reset parameters
1542 */
1543 data->cur_lunt->SCpnt = NULL;
1544 data->cur_lunt = NULL;
1545 data->cur_target = NULL;
1546 data->CurrentSC = NULL;
1547}
1548
1549
1550/*
1551 * Bus Free Occur
1552 *
1553 * Current Phase is BUSFREE. AutoSCSI is automatically execute BUSFREE phase
1554 * with ACK reply when below condition is matched:
1555 * MsgIn 00: Command Complete.
1556 * MsgIn 02: Save Data Pointer.
1557 * MsgIn 04: Diconnect.
1558 * In other case, unexpected BUSFREE is detected.
1559 */
1560static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
1561{
1562 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1563 unsigned int base = SCpnt->device->host->io_port;
1564
1565 nsp32_dbg(NSP32_DEBUG_BUSFREE, "enter execph=0x%x", execph);
1566 show_autophase(execph);
1567
1568 nsp32_write4(base, BM_CNT, 0);
1569 nsp32_write2(base, TRANSFER_CONTROL, 0);
1570
1571 /*
1572 * MsgIn 02: Save Data Pointer
1573 *
1574 * VALID:
1575 * Save Data Pointer is received. Adjust pointer.
1576 *
1577 * NO-VALID:
1578 * SCSI-3 says if Save Data Pointer is not received, then we restart
1579 * processing and we can't adjust any SCSI data pointer in next data
1580 * phase.
1581 */
1582 if (execph & MSGIN_02_VALID) {
1583 nsp32_dbg(NSP32_DEBUG_BUSFREE, "MsgIn02_Valid");
1584
1585 /*
1586 * Check sack_cnt/saved_sack_cnt, then adjust sg table if
1587 * needed.
1588 */
1589 if (!(execph & MSGIN_00_VALID) &&
1590 ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE))) {
1591 unsigned int sacklen, s_sacklen;
1592
1593 /*
1594 * Read SACK count and SAVEDSACK count, then compare.
1595 */
1596 sacklen = nsp32_read4(base, SACK_CNT );
1597 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT);
1598
1599 /*
1600 * If SAVEDSACKCNT == 0, it means SavedDataPointer is
1601 * come after data transferring.
1602 */
1603 if (s_sacklen > 0) {
1604 /*
1605 * Comparing between sack and savedsack to
1606 * check the condition of AutoMsgIn03.
1607 *
1608 * If they are same, set msgin03 == TRUE,
1609 * COMMANDCONTROL_AUTO_MSGIN_03 is enabled at
1610 * reselection. On the other hand, if they
1611 * aren't same, set msgin03 == FALSE, and
1612 * COMMANDCONTROL_AUTO_MSGIN_03 is disabled at
1613 * reselection.
1614 */
1615 if (sacklen != s_sacklen) {
1616 data->cur_lunt->msgin03 = FALSE;
1617 } else {
1618 data->cur_lunt->msgin03 = TRUE;
1619 }
1620
1621 nsp32_adjust_busfree(SCpnt, s_sacklen);
1622 }
1623 }
1624
1625 /* This value has not substitude with valid value yet... */
1626 //data->cur_lunt->save_datp = data->cur_datp;
1627 } else {
1628 /*
1629 * no processing.
1630 */
1631 }
1632
1633 if (execph & MSGIN_03_VALID) {
1634 /* MsgIn03 was valid to be processed. No need processing. */
1635 }
1636
1637 /*
1638 * target SDTR check
1639 */
1640 if (data->cur_target->sync_flag & SDTR_INITIATOR) {
1641 /*
1642 * SDTR negotiation pulled by the initiator has not
1643 * finished yet. Fall back to ASYNC mode.
1644 */
1645 nsp32_set_async(data, data->cur_target);
1646 data->cur_target->sync_flag &= ~SDTR_INITIATOR;
1647 data->cur_target->sync_flag |= SDTR_DONE;
1648 } else if (data->cur_target->sync_flag & SDTR_TARGET) {
1649 /*
1650 * SDTR negotiation pulled by the target has been
1651 * negotiating.
1652 */
1653 if (execph & (MSGIN_00_VALID | MSGIN_04_VALID)) {
1654 /*
1655 * If valid message is received, then
1656 * negotiation is succeeded.
1657 */
1658 } else {
1659 /*
1660 * On the contrary, if unexpected bus free is
1661 * occurred, then negotiation is failed. Fall
1662 * back to ASYNC mode.
1663 */
1664 nsp32_set_async(data, data->cur_target);
1665 }
1666 data->cur_target->sync_flag &= ~SDTR_TARGET;
1667 data->cur_target->sync_flag |= SDTR_DONE;
1668 }
1669
1670 /*
1671 * It is always ensured by SCSI standard that initiator
1672 * switches into Bus Free Phase after
1673 * receiving message 00 (Command Complete), 04 (Disconnect).
1674 * It's the reason that processing here is valid.
1675 */
1676 if (execph & MSGIN_00_VALID) {
1677 /* MsgIn 00: Command Complete */
1678 nsp32_dbg(NSP32_DEBUG_BUSFREE, "command complete");
1679
1680 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1681 SCpnt->SCp.Message = 0;
1682 nsp32_dbg(NSP32_DEBUG_BUSFREE,
1683 "normal end stat=0x%x resid=0x%x\n",
1684 SCpnt->SCp.Status, scsi_get_resid(SCpnt));
1685 SCpnt->result = (DID_OK << 16) |
1686 (SCpnt->SCp.Message << 8) |
1687 (SCpnt->SCp.Status << 0);
1688 nsp32_scsi_done(SCpnt);
1689 /* All operation is done */
1690 return TRUE;
1691 } else if (execph & MSGIN_04_VALID) {
1692 /* MsgIn 04: Disconnect */
1693 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
1694 SCpnt->SCp.Message = 4;
1695
1696 nsp32_dbg(NSP32_DEBUG_BUSFREE, "disconnect");
1697 return TRUE;
1698 } else {
1699 /* Unexpected bus free */
1700 nsp32_msg(KERN_WARNING, "unexpected bus free occurred");
1701
1702 /* DID_ERROR? */
1703 //SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Message << 8) | (SCpnt->SCp.Status << 0);
1704 SCpnt->result = DID_ERROR << 16;
1705 nsp32_scsi_done(SCpnt);
1706 return TRUE;
1707 }
1708 return FALSE;
1709}
1710
1711
1712/*
1713 * nsp32_adjust_busfree - adjusting SG table
1714 *
1715 * Note: This driver adjust the SG table using SCSI ACK
1716 * counter instead of BMCNT counter!
1717 */
1718static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen)
1719{
1720 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1721 int old_entry = data->cur_entry;
1722 int new_entry;
1723 int sg_num = data->cur_lunt->sg_num;
1724 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
1725 unsigned int restlen, sentlen;
1726 u32_le len, addr;
1727
1728 nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", scsi_get_resid(SCpnt));
1729
1730 /* adjust saved SACK count with 4 byte start address boundary */
1731 s_sacklen -= le32_to_cpu(sgt[old_entry].addr) & 3;
1732
1733 /*
1734 * calculate new_entry from sack count and each sgt[].len
1735 * calculate the byte which is intent to send
1736 */
1737 sentlen = 0;
1738 for (new_entry = old_entry; new_entry < sg_num; new_entry++) {
1739 sentlen += (le32_to_cpu(sgt[new_entry].len) & ~SGTEND);
1740 if (sentlen > s_sacklen) {
1741 break;
1742 }
1743 }
1744
1745 /* all sgt is processed */
1746 if (new_entry == sg_num) {
1747 goto last;
1748 }
1749
1750 if (sentlen == s_sacklen) {
1751 /* XXX: confirm it's ok or not */
1752 /* In this case, it's ok because we are at
1753 the head element of the sg. restlen is correctly calculated. */
1754 }
1755
1756 /* calculate the rest length for transferring */
1757 restlen = sentlen - s_sacklen;
1758
1759 /* update adjusting current SG table entry */
1760 len = le32_to_cpu(sgt[new_entry].len);
1761 addr = le32_to_cpu(sgt[new_entry].addr);
1762 addr += (len - restlen);
1763 sgt[new_entry].addr = cpu_to_le32(addr);
1764 sgt[new_entry].len = cpu_to_le32(restlen);
1765
1766 /* set cur_entry with new_entry */
1767 data->cur_entry = new_entry;
1768
1769 return;
1770
1771 last:
1772 if (scsi_get_resid(SCpnt) < sentlen) {
1773 nsp32_msg(KERN_ERR, "resid underflow");
1774 }
1775
1776 scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) - sentlen);
1777 nsp32_dbg(NSP32_DEBUG_SGLIST, "new resid=0x%x", scsi_get_resid(SCpnt));
1778
1779 /* update hostdata and lun */
1780
1781 return;
1782}
1783
1784
1785/*
1786 * It's called MsgOut phase occur.
1787 * NinjaSCSI-32Bi/UDE automatically processes up to 3 messages in
1788 * message out phase. It, however, has more than 3 messages,
1789 * HBA creates the interrupt and we have to process by hand.
1790 */
1791static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)
1792{
1793 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1794 unsigned int base = SCpnt->device->host->io_port;
1795 //unsigned short command;
1796 long new_sgtp;
1797 int i;
1798
1799 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
1800 "enter: msgout_len: 0x%x", data->msgout_len);
1801
1802 /*
1803 * If MsgOut phase is occurred without having any
1804 * message, then No_Operation is sent (SCSI-2).
1805 */
1806 if (data->msgout_len == 0) {
1807 nsp32_build_nop(SCpnt);
1808 }
1809
1810 /*
1811 * Set SGTP ADDR current entry for restarting AUTOSCSI,
1812 * because SGTP is incremented next point.
1813 * There is few statement in the specification...
1814 */
1815 new_sgtp = data->cur_lunt->sglun_paddr +
1816 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
1817
1818 /*
1819 * send messages
1820 */
1821 for (i = 0; i < data->msgout_len; i++) {
1822 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
1823 "%d : 0x%x", i, data->msgoutbuf[i]);
1824
1825 /*
1826 * Check REQ is asserted.
1827 */
1828 nsp32_wait_req(data, ASSERT);
1829
1830 if (i == (data->msgout_len - 1)) {
1831 /*
1832 * If the last message, set the AutoSCSI restart
1833 * before send back the ack message. AutoSCSI
1834 * restart automatically negate ATN signal.
1835 */
1836 //command = (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02);
1837 //nsp32_restart_autoscsi(SCpnt, command);
1838 nsp32_write2(base, COMMAND_CONTROL,
1839 (CLEAR_CDB_FIFO_POINTER |
1840 AUTO_COMMAND_PHASE |
1841 AUTOSCSI_RESTART |
1842 AUTO_MSGIN_00_OR_04 |
1843 AUTO_MSGIN_02 ));
1844 }
1845 /*
1846 * Write data with SACK, then wait sack is
1847 * automatically negated.
1848 */
1849 nsp32_write1(base, SCSI_DATA_WITH_ACK, data->msgoutbuf[i]);
1850 nsp32_wait_sack(data, NEGATE);
1851
1852 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "bus: 0x%x\n",
1853 nsp32_read1(base, SCSI_BUS_MONITOR));
1854 };
1855
1856 data->msgout_len = 0;
1857
1858 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "exit");
1859}
1860
1861/*
1862 * Restart AutoSCSI
1863 *
1864 * Note: Restarting AutoSCSI needs set:
1865 * SYNC_REG, ACK_WIDTH, SGT_ADR, TRANSFER_CONTROL
1866 */
1867static void nsp32_restart_autoscsi(struct scsi_cmnd *SCpnt, unsigned short command)
1868{
1869 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1870 unsigned int base = data->BaseAddress;
1871 unsigned short transfer = 0;
1872
1873 nsp32_dbg(NSP32_DEBUG_RESTART, "enter");
1874
1875 if (data->cur_target == NULL || data->cur_lunt == NULL) {
1876 nsp32_msg(KERN_ERR, "Target or Lun is invalid");
1877 }
1878
1879 /*
1880 * set SYNC_REG
1881 * Don't set BM_START_ADR before setting this register.
1882 */
1883 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg);
1884
1885 /*
1886 * set ACKWIDTH
1887 */
1888 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth);
1889
1890 /*
1891 * set SREQ hazard killer sampling rate
1892 */
1893 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg);
1894
1895 /*
1896 * set SGT ADDR (physical address)
1897 */
1898 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr);
1899
1900 /*
1901 * set TRANSFER CONTROL REG
1902 */
1903 transfer = 0;
1904 transfer |= (TRANSFER_GO | ALL_COUNTER_CLR);
1905 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
1906 if (scsi_bufflen(SCpnt) > 0) {
1907 transfer |= BM_START;
1908 }
1909 } else if (data->trans_method & NSP32_TRANSFER_MMIO) {
1910 transfer |= CB_MMIO_MODE;
1911 } else if (data->trans_method & NSP32_TRANSFER_PIO) {
1912 transfer |= CB_IO_MODE;
1913 }
1914 nsp32_write2(base, TRANSFER_CONTROL, transfer);
1915
1916 /*
1917 * restart AutoSCSI
1918 *
1919 * TODO: COMMANDCONTROL_AUTO_COMMAND_PHASE is needed ?
1920 */
1921 command |= (CLEAR_CDB_FIFO_POINTER |
1922 AUTO_COMMAND_PHASE |
1923 AUTOSCSI_RESTART );
1924 nsp32_write2(base, COMMAND_CONTROL, command);
1925
1926 nsp32_dbg(NSP32_DEBUG_RESTART, "exit");
1927}
1928
1929
1930/*
1931 * cannot run automatically message in occur
1932 */
1933static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
1934 unsigned long irq_status,
1935 unsigned short execph)
1936{
1937 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
1938 unsigned int base = SCpnt->device->host->io_port;
1939 unsigned char msg;
1940 unsigned char msgtype;
1941 unsigned char newlun;
1942 unsigned short command = 0;
1943 int msgclear = TRUE;
1944 long new_sgtp;
1945 int ret;
1946
1947 /*
1948 * read first message
1949 * Use SCSIDATA_W_ACK instead of SCSIDATAIN, because the procedure
1950 * of Message-In have to be processed before sending back SCSI ACK.
1951 */
1952 msg = nsp32_read1(base, SCSI_DATA_IN);
1953 data->msginbuf[(unsigned char)data->msgin_len] = msg;
1954 msgtype = data->msginbuf[0];
1955 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR,
1956 "enter: msglen: 0x%x msgin: 0x%x msgtype: 0x%x",
1957 data->msgin_len, msg, msgtype);
1958
1959 /*
1960 * TODO: We need checking whether bus phase is message in?
1961 */
1962
1963 /*
1964 * assert SCSI ACK
1965 */
1966 nsp32_sack_assert(data);
1967
1968 /*
1969 * processing IDENTIFY
1970 */
1971 if (msgtype & 0x80) {
1972 if (!(irq_status & IRQSTATUS_RESELECT_OCCUER)) {
1973 /* Invalid (non reselect) phase */
1974 goto reject;
1975 }
1976
1977 newlun = msgtype & 0x1f; /* TODO: SPI-3 compliant? */
1978 ret = nsp32_reselection(SCpnt, newlun);
1979 if (ret == TRUE) {
1980 goto restart;
1981 } else {
1982 goto reject;
1983 }
1984 }
1985
1986 /*
1987 * processing messages except for IDENTIFY
1988 *
1989 * TODO: Messages are all SCSI-2 terminology. SCSI-3 compliance is TODO.
1990 */
1991 switch (msgtype) {
1992 /*
1993 * 1-byte message
1994 */
1995 case COMMAND_COMPLETE:
1996 case DISCONNECT:
1997 /*
1998 * These messages should not be occurred.
1999 * They should be processed on AutoSCSI sequencer.
2000 */
2001 nsp32_msg(KERN_WARNING,
2002 "unexpected message of AutoSCSI MsgIn: 0x%x", msg);
2003 break;
2004
2005 case RESTORE_POINTERS:
2006 /*
2007 * AutoMsgIn03 is disabled, and HBA gets this message.
2008 */
2009
2010 if ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE)) {
2011 unsigned int s_sacklen;
2012
2013 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT);
2014 if ((execph & MSGIN_02_VALID) && (s_sacklen > 0)) {
2015 nsp32_adjust_busfree(SCpnt, s_sacklen);
2016 } else {
2017 /* No need to rewrite SGT */
2018 }
2019 }
2020 data->cur_lunt->msgin03 = FALSE;
2021
2022 /* Update with the new value */
2023
2024 /* reset SACK/SavedACK counter (or ALL clear?) */
2025 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
2026
2027 /*
2028 * set new sg pointer
2029 */
2030 new_sgtp = data->cur_lunt->sglun_paddr +
2031 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
2032 nsp32_write4(base, SGT_ADR, new_sgtp);
2033
2034 break;
2035
2036 case SAVE_POINTERS:
2037 /*
2038 * These messages should not be occurred.
2039 * They should be processed on AutoSCSI sequencer.
2040 */
2041 nsp32_msg (KERN_WARNING,
2042 "unexpected message of AutoSCSI MsgIn: SAVE_POINTERS");
2043
2044 break;
2045
2046 case MESSAGE_REJECT:
2047 /* If previous message_out is sending SDTR, and get
2048 message_reject from target, SDTR negotiation is failed */
2049 if (data->cur_target->sync_flag &
2050 (SDTR_INITIATOR | SDTR_TARGET)) {
2051 /*
2052 * Current target is negotiating SDTR, but it's
2053 * failed. Fall back to async transfer mode, and set
2054 * SDTR_DONE.
2055 */
2056 nsp32_set_async(data, data->cur_target);
2057 data->cur_target->sync_flag &= ~SDTR_INITIATOR;
2058 data->cur_target->sync_flag |= SDTR_DONE;
2059
2060 }
2061 break;
2062
2063 case LINKED_CMD_COMPLETE:
2064 case LINKED_FLG_CMD_COMPLETE:
2065 /* queue tag is not supported currently */
2066 nsp32_msg (KERN_WARNING,
2067 "unsupported message: 0x%x", msgtype);
2068 break;
2069
2070 case INITIATE_RECOVERY:
2071 /* staring ECA (Extended Contingent Allegiance) state. */
2072 /* This message is declined in SPI2 or later. */
2073
2074 goto reject;
2075
2076 /*
2077 * 2-byte message
2078 */
2079 case SIMPLE_QUEUE_TAG:
2080 case 0x23:
2081 /*
2082 * 0x23: Ignore_Wide_Residue is not declared in scsi.h.
2083 * No support is needed.
2084 */
2085 if (data->msgin_len >= 1) {
2086 goto reject;
2087 }
2088
2089 /* current position is 1-byte of 2 byte */
2090 msgclear = FALSE;
2091
2092 break;
2093
2094 /*
2095 * extended message
2096 */
2097 case EXTENDED_MESSAGE:
2098 if (data->msgin_len < 1) {
2099 /*
2100 * Current position does not reach 2-byte
2101 * (2-byte is extended message length).
2102 */
2103 msgclear = FALSE;
2104 break;
2105 }
2106
2107 if ((data->msginbuf[1] + 1) > data->msgin_len) {
2108 /*
2109 * Current extended message has msginbuf[1] + 2
2110 * (msgin_len starts counting from 0, so buf[1] + 1).
2111 * If current message position is not finished,
2112 * continue receiving message.
2113 */
2114 msgclear = FALSE;
2115 break;
2116 }
2117
2118 /*
2119 * Reach here means regular length of each type of
2120 * extended messages.
2121 */
2122 switch (data->msginbuf[2]) {
2123 case EXTENDED_MODIFY_DATA_POINTER:
2124 /* TODO */
2125 goto reject; /* not implemented yet */
2126 break;
2127
2128 case EXTENDED_SDTR:
2129 /*
2130 * Exchange this message between initiator and target.
2131 */
2132 if (data->msgin_len != EXTENDED_SDTR_LEN + 1) {
2133 /*
2134 * received inappropriate message.
2135 */
2136 goto reject;
2137 break;
2138 }
2139
2140 nsp32_analyze_sdtr(SCpnt);
2141
2142 break;
2143
2144 case EXTENDED_EXTENDED_IDENTIFY:
2145 /* SCSI-I only, not supported. */
2146 goto reject; /* not implemented yet */
2147
2148 break;
2149
2150 case EXTENDED_WDTR:
2151 goto reject; /* not implemented yet */
2152
2153 break;
2154
2155 default:
2156 goto reject;
2157 }
2158 break;
2159
2160 default:
2161 goto reject;
2162 }
2163
2164 restart:
2165 if (msgclear == TRUE) {
2166 data->msgin_len = 0;
2167
2168 /*
2169 * If restarting AutoSCSI, but there are some message to out
2170 * (msgout_len > 0), set AutoATN, and set SCSIMSGOUT as 0
2171 * (MV_VALID = 0). When commandcontrol is written with
2172 * AutoSCSI restart, at the same time MsgOutOccur should be
2173 * happened (however, such situation is really possible...?).
2174 */
2175 if (data->msgout_len > 0) {
2176 nsp32_write4(base, SCSI_MSG_OUT, 0);
2177 command |= AUTO_ATN;
2178 }
2179
2180 /*
2181 * restart AutoSCSI
2182 * If it's failed, COMMANDCONTROL_AUTO_COMMAND_PHASE is needed.
2183 */
2184 command |= (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02);
2185
2186 /*
2187 * If current msgin03 is TRUE, then flag on.
2188 */
2189 if (data->cur_lunt->msgin03 == TRUE) {
2190 command |= AUTO_MSGIN_03;
2191 }
2192 data->cur_lunt->msgin03 = FALSE;
2193 } else {
2194 data->msgin_len++;
2195 }
2196
2197 /*
2198 * restart AutoSCSI
2199 */
2200 nsp32_restart_autoscsi(SCpnt, command);
2201
2202 /*
2203 * wait SCSI REQ negate for REQ-ACK handshake
2204 */
2205 nsp32_wait_req(data, NEGATE);
2206
2207 /*
2208 * negate SCSI ACK
2209 */
2210 nsp32_sack_negate(data);
2211
2212 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit");
2213
2214 return;
2215
2216 reject:
2217 nsp32_msg(KERN_WARNING,
2218 "invalid or unsupported MessageIn, rejected. "
2219 "current msg: 0x%x (len: 0x%x), processing msg: 0x%x",
2220 msg, data->msgin_len, msgtype);
2221 nsp32_build_reject(SCpnt);
2222 data->msgin_len = 0;
2223
2224 goto restart;
2225}
2226
2227/*
2228 *
2229 */
2230static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
2231{
2232 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2233 nsp32_target *target = data->cur_target;
2234 nsp32_sync_table *synct;
2235 unsigned char get_period = data->msginbuf[3];
2236 unsigned char get_offset = data->msginbuf[4];
2237 int entry;
2238 int syncnum;
2239
2240 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "enter");
2241
2242 synct = data->synct;
2243 syncnum = data->syncnum;
2244
2245 /*
2246 * If this inititor sent the SDTR message, then target responds SDTR,
2247 * initiator SYNCREG, ACKWIDTH from SDTR parameter.
2248 * Messages are not appropriate, then send back reject message.
2249 * If initiator did not send the SDTR, but target sends SDTR,
2250 * initiator calculator the appropriate parameter and send back SDTR.
2251 */
2252 if (target->sync_flag & SDTR_INITIATOR) {
2253 /*
2254 * Initiator sent SDTR, the target responds and
2255 * send back negotiation SDTR.
2256 */
2257 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target responds SDTR");
2258
2259 target->sync_flag &= ~SDTR_INITIATOR;
2260 target->sync_flag |= SDTR_DONE;
2261
2262 /*
2263 * offset:
2264 */
2265 if (get_offset > SYNC_OFFSET) {
2266 /*
2267 * Negotiation is failed, the target send back
2268 * unexpected offset value.
2269 */
2270 goto reject;
2271 }
2272
2273 if (get_offset == ASYNC_OFFSET) {
2274 /*
2275 * Negotiation is succeeded, the target want
2276 * to fall back into asynchronous transfer mode.
2277 */
2278 goto async;
2279 }
2280
2281 /*
2282 * period:
2283 * Check whether sync period is too short. If too short,
2284 * fall back to async mode. If it's ok, then investigate
2285 * the received sync period. If sync period is acceptable
2286 * between sync table start_period and end_period, then
2287 * set this I_T nexus as sent offset and period.
2288 * If it's not acceptable, send back reject and fall back
2289 * to async mode.
2290 */
2291 if (get_period < data->synct[0].period_num) {
2292 /*
2293 * Negotiation is failed, the target send back
2294 * unexpected period value.
2295 */
2296 goto reject;
2297 }
2298
2299 entry = nsp32_search_period_entry(data, target, get_period);
2300
2301 if (entry < 0) {
2302 /*
2303 * Target want to use long period which is not
2304 * acceptable NinjaSCSI-32Bi/UDE.
2305 */
2306 goto reject;
2307 }
2308
2309 /*
2310 * Set new sync table and offset in this I_T nexus.
2311 */
2312 nsp32_set_sync_entry(data, target, entry, get_offset);
2313 } else {
2314 /* Target send SDTR to initiator. */
2315 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target send SDTR");
2316
2317 target->sync_flag |= SDTR_INITIATOR;
2318
2319 /* offset: */
2320 if (get_offset > SYNC_OFFSET) {
2321 /* send back as SYNC_OFFSET */
2322 get_offset = SYNC_OFFSET;
2323 }
2324
2325 /* period: */
2326 if (get_period < data->synct[0].period_num) {
2327 get_period = data->synct[0].period_num;
2328 }
2329
2330 entry = nsp32_search_period_entry(data, target, get_period);
2331
2332 if (get_offset == ASYNC_OFFSET || entry < 0) {
2333 nsp32_set_async(data, target);
2334 nsp32_build_sdtr(SCpnt, 0, ASYNC_OFFSET);
2335 } else {
2336 nsp32_set_sync_entry(data, target, entry, get_offset);
2337 nsp32_build_sdtr(SCpnt, get_period, get_offset);
2338 }
2339 }
2340
2341 target->period = get_period;
2342 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit");
2343 return;
2344
2345 reject:
2346 /*
2347 * If the current message is unacceptable, send back to the target
2348 * with reject message.
2349 */
2350 nsp32_build_reject(SCpnt);
2351
2352 async:
2353 nsp32_set_async(data, target); /* set as ASYNC transfer mode */
2354
2355 target->period = 0;
2356 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit: set async");
2357 return;
2358}
2359
2360
2361/*
2362 * Search config entry number matched in sync_table from given
2363 * target and speed period value. If failed to search, return negative value.
2364 */
2365static int nsp32_search_period_entry(nsp32_hw_data *data,
2366 nsp32_target *target,
2367 unsigned char period)
2368{
2369 int i;
2370
2371 if (target->limit_entry >= data->syncnum) {
2372 nsp32_msg(KERN_ERR, "limit_entry exceeds syncnum!");
2373 target->limit_entry = 0;
2374 }
2375
2376 for (i = target->limit_entry; i < data->syncnum; i++) {
2377 if (period >= data->synct[i].start_period &&
2378 period <= data->synct[i].end_period) {
2379 break;
2380 }
2381 }
2382
2383 /*
2384 * Check given period value is over the sync_table value.
2385 * If so, return max value.
2386 */
2387 if (i == data->syncnum) {
2388 i = -1;
2389 }
2390
2391 return i;
2392}
2393
2394
2395/*
2396 * target <-> initiator use ASYNC transfer
2397 */
2398static void nsp32_set_async(nsp32_hw_data *data, nsp32_target *target)
2399{
2400 unsigned char period = data->synct[target->limit_entry].period_num;
2401
2402 target->offset = ASYNC_OFFSET;
2403 target->period = 0;
2404 target->syncreg = TO_SYNCREG(period, ASYNC_OFFSET);
2405 target->ackwidth = 0;
2406 target->sample_reg = 0;
2407
2408 nsp32_dbg(NSP32_DEBUG_SYNC, "set async");
2409}
2410
2411
2412/*
2413 * target <-> initiator use maximum SYNC transfer
2414 */
2415static void nsp32_set_max_sync(nsp32_hw_data *data,
2416 nsp32_target *target,
2417 unsigned char *period,
2418 unsigned char *offset)
2419{
2420 unsigned char period_num, ackwidth;
2421
2422 period_num = data->synct[target->limit_entry].period_num;
2423 *period = data->synct[target->limit_entry].start_period;
2424 ackwidth = data->synct[target->limit_entry].ackwidth;
2425 *offset = SYNC_OFFSET;
2426
2427 target->syncreg = TO_SYNCREG(period_num, *offset);
2428 target->ackwidth = ackwidth;
2429 target->offset = *offset;
2430 target->sample_reg = 0; /* disable SREQ sampling */
2431}
2432
2433
2434/*
2435 * target <-> initiator use entry number speed
2436 */
2437static void nsp32_set_sync_entry(nsp32_hw_data *data,
2438 nsp32_target *target,
2439 int entry,
2440 unsigned char offset)
2441{
2442 unsigned char period, ackwidth, sample_rate;
2443
2444 period = data->synct[entry].period_num;
2445 ackwidth = data->synct[entry].ackwidth;
2446 offset = offset;
2447 sample_rate = data->synct[entry].sample_rate;
2448
2449 target->syncreg = TO_SYNCREG(period, offset);
2450 target->ackwidth = ackwidth;
2451 target->offset = offset;
2452 target->sample_reg = sample_rate | SAMPLING_ENABLE;
2453
2454 nsp32_dbg(NSP32_DEBUG_SYNC, "set sync");
2455}
2456
2457
2458/*
2459 * It waits until SCSI REQ becomes assertion or negation state.
2460 *
2461 * Note: If nsp32_msgin_occur is called, we asserts SCSI ACK. Then
2462 * connected target responds SCSI REQ negation. We have to wait
2463 * SCSI REQ becomes negation in order to negate SCSI ACK signal for
2464 * REQ-ACK handshake.
2465 */
2466static void nsp32_wait_req(nsp32_hw_data *data, int state)
2467{
2468 unsigned int base = data->BaseAddress;
2469 int wait_time = 0;
2470 unsigned char bus, req_bit;
2471
2472 if (!((state == ASSERT) || (state == NEGATE))) {
2473 nsp32_msg(KERN_ERR, "unknown state designation");
2474 }
2475 /* REQ is BIT(5) */
2476 req_bit = (state == ASSERT ? BUSMON_REQ : 0);
2477
2478 do {
2479 bus = nsp32_read1(base, SCSI_BUS_MONITOR);
2480 if ((bus & BUSMON_REQ) == req_bit) {
2481 nsp32_dbg(NSP32_DEBUG_WAIT,
2482 "wait_time: %d", wait_time);
2483 return;
2484 }
2485 udelay(1);
2486 wait_time++;
2487 } while (wait_time < REQSACK_TIMEOUT_TIME);
2488
2489 nsp32_msg(KERN_WARNING, "wait REQ timeout, req_bit: 0x%x", req_bit);
2490}
2491
2492/*
2493 * It waits until SCSI SACK becomes assertion or negation state.
2494 */
2495static void nsp32_wait_sack(nsp32_hw_data *data, int state)
2496{
2497 unsigned int base = data->BaseAddress;
2498 int wait_time = 0;
2499 unsigned char bus, ack_bit;
2500
2501 if (!((state == ASSERT) || (state == NEGATE))) {
2502 nsp32_msg(KERN_ERR, "unknown state designation");
2503 }
2504 /* ACK is BIT(4) */
2505 ack_bit = (state == ASSERT ? BUSMON_ACK : 0);
2506
2507 do {
2508 bus = nsp32_read1(base, SCSI_BUS_MONITOR);
2509 if ((bus & BUSMON_ACK) == ack_bit) {
2510 nsp32_dbg(NSP32_DEBUG_WAIT,
2511 "wait_time: %d", wait_time);
2512 return;
2513 }
2514 udelay(1);
2515 wait_time++;
2516 } while (wait_time < REQSACK_TIMEOUT_TIME);
2517
2518 nsp32_msg(KERN_WARNING, "wait SACK timeout, ack_bit: 0x%x", ack_bit);
2519}
2520
2521/*
2522 * assert SCSI ACK
2523 *
2524 * Note: SCSI ACK assertion needs with ACKENB=1, AUTODIRECTION=1.
2525 */
2526static void nsp32_sack_assert(nsp32_hw_data *data)
2527{
2528 unsigned int base = data->BaseAddress;
2529 unsigned char busctrl;
2530
2531 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL);
2532 busctrl |= (BUSCTL_ACK | AUTODIRECTION | ACKENB);
2533 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl);
2534}
2535
2536/*
2537 * negate SCSI ACK
2538 */
2539static void nsp32_sack_negate(nsp32_hw_data *data)
2540{
2541 unsigned int base = data->BaseAddress;
2542 unsigned char busctrl;
2543
2544 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL);
2545 busctrl &= ~BUSCTL_ACK;
2546 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl);
2547}
2548
2549
2550
2551/*
2552 * Note: n_io_port is defined as 0x7f because I/O register port is
2553 * assigned as:
2554 * 0x800-0x8ff: memory mapped I/O port
2555 * 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly)
2556 * 0xc00-0xfff: CardBus status registers
2557 */
2558static int nsp32_detect(struct pci_dev *pdev)
2559{
2560 struct Scsi_Host *host; /* registered host structure */
2561 struct resource *res;
2562 nsp32_hw_data *data;
2563 int ret;
2564 int i, j;
2565
2566 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
2567
2568 /*
2569 * register this HBA as SCSI device
2570 */
2571 host = scsi_host_alloc(&nsp32_template, sizeof(nsp32_hw_data));
2572 if (host == NULL) {
2573 nsp32_msg (KERN_ERR, "failed to scsi register");
2574 goto err;
2575 }
2576
2577 /*
2578 * set nsp32_hw_data
2579 */
2580 data = (nsp32_hw_data *)host->hostdata;
2581
2582 memcpy(data, &nsp32_data_base, sizeof(nsp32_hw_data));
2583
2584 host->irq = data->IrqNumber;
2585 host->io_port = data->BaseAddress;
2586 host->unique_id = data->BaseAddress;
2587 host->n_io_port = data->NumAddress;
2588 host->base = (unsigned long)data->MmioAddress;
2589
2590 data->Host = host;
2591 spin_lock_init(&(data->Lock));
2592
2593 data->cur_lunt = NULL;
2594 data->cur_target = NULL;
2595
2596 /*
2597 * Bus master transfer mode is supported currently.
2598 */
2599 data->trans_method = NSP32_TRANSFER_BUSMASTER;
2600
2601 /*
2602 * Set clock div, CLOCK_4 (HBA has own external clock, and
2603 * dividing * 100ns/4).
2604 * Currently CLOCK_4 has only tested, not for CLOCK_2/PCICLK yet.
2605 */
2606 data->clock = CLOCK_4;
2607
2608 /*
2609 * Select appropriate nsp32_sync_table and set I_CLOCKDIV.
2610 */
2611 switch (data->clock) {
2612 case CLOCK_4:
2613 /* If data->clock is CLOCK_4, then select 40M sync table. */
2614 data->synct = nsp32_sync_table_40M;
2615 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M);
2616 break;
2617 case CLOCK_2:
2618 /* If data->clock is CLOCK_2, then select 20M sync table. */
2619 data->synct = nsp32_sync_table_20M;
2620 data->syncnum = ARRAY_SIZE(nsp32_sync_table_20M);
2621 break;
2622 case PCICLK:
2623 /* If data->clock is PCICLK, then select pci sync table. */
2624 data->synct = nsp32_sync_table_pci;
2625 data->syncnum = ARRAY_SIZE(nsp32_sync_table_pci);
2626 break;
2627 default:
2628 nsp32_msg(KERN_WARNING,
2629 "Invalid clock div is selected, set CLOCK_4.");
2630 /* Use default value CLOCK_4 */
2631 data->clock = CLOCK_4;
2632 data->synct = nsp32_sync_table_40M;
2633 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M);
2634 }
2635
2636 /*
2637 * setup nsp32_lunt
2638 */
2639
2640 /*
2641 * setup DMA
2642 */
2643 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
2644 nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
2645 goto scsi_unregister;
2646 }
2647
2648 /*
2649 * allocate autoparam DMA resource.
2650 */
2651 data->autoparam = pci_alloc_consistent(pdev, sizeof(nsp32_autoparam), &(data->auto_paddr));
2652 if (data->autoparam == NULL) {
2653 nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
2654 goto scsi_unregister;
2655 }
2656
2657 /*
2658 * allocate scatter-gather DMA resource.
2659 */
2660 data->sg_list = pci_alloc_consistent(pdev, NSP32_SG_TABLE_SIZE,
2661 &(data->sg_paddr));
2662 if (data->sg_list == NULL) {
2663 nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
2664 goto free_autoparam;
2665 }
2666
2667 for (i = 0; i < ARRAY_SIZE(data->lunt); i++) {
2668 for (j = 0; j < ARRAY_SIZE(data->lunt[0]); j++) {
2669 int offset = i * ARRAY_SIZE(data->lunt[0]) + j;
2670 nsp32_lunt tmp = {
2671 .SCpnt = NULL,
2672 .save_datp = 0,
2673 .msgin03 = FALSE,
2674 .sg_num = 0,
2675 .cur_entry = 0,
2676 .sglun = &(data->sg_list[offset]),
2677 .sglun_paddr = data->sg_paddr + (offset * sizeof(nsp32_sglun)),
2678 };
2679
2680 data->lunt[i][j] = tmp;
2681 }
2682 }
2683
2684 /*
2685 * setup target
2686 */
2687 for (i = 0; i < ARRAY_SIZE(data->target); i++) {
2688 nsp32_target *target = &(data->target[i]);
2689
2690 target->limit_entry = 0;
2691 target->sync_flag = 0;
2692 nsp32_set_async(data, target);
2693 }
2694
2695 /*
2696 * EEPROM check
2697 */
2698 ret = nsp32_getprom_param(data);
2699 if (ret == FALSE) {
2700 data->resettime = 3; /* default 3 */
2701 }
2702
2703 /*
2704 * setup HBA
2705 */
2706 nsp32hw_init(data);
2707
2708 snprintf(data->info_str, sizeof(data->info_str),
2709 "NinjaSCSI-32Bi/UDE: irq %d, io 0x%lx+0x%x",
2710 host->irq, host->io_port, host->n_io_port);
2711
2712 /*
2713 * SCSI bus reset
2714 *
2715 * Note: It's important to reset SCSI bus in initialization phase.
2716 * NinjaSCSI-32Bi/UDE HBA EEPROM seems to exchange SDTR when
2717 * system is coming up, so SCSI devices connected to HBA is set as
2718 * un-asynchronous mode. It brings the merit that this HBA is
2719 * ready to start synchronous transfer without any preparation,
2720 * but we are difficult to control transfer speed. In addition,
2721 * it prevents device transfer speed from effecting EEPROM start-up
2722 * SDTR. NinjaSCSI-32Bi/UDE has the feature if EEPROM is set as
2723 * Auto Mode, then FAST-10M is selected when SCSI devices are
2724 * connected same or more than 4 devices. It should be avoided
2725 * depending on this specification. Thus, resetting the SCSI bus
2726 * restores all connected SCSI devices to asynchronous mode, then
2727 * this driver set SDTR safely later, and we can control all SCSI
2728 * device transfer mode.
2729 */
2730 nsp32_do_bus_reset(data);
2731
2732 ret = request_irq(host->irq, do_nsp32_isr, IRQF_SHARED, "nsp32", data);
2733 if (ret < 0) {
2734 nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 "
2735 "SCSI PCI controller. Interrupt: %d", host->irq);
2736 goto free_sg_list;
2737 }
2738
2739 /*
2740 * PCI IO register
2741 */
2742 res = request_region(host->io_port, host->n_io_port, "nsp32");
2743 if (res == NULL) {
2744 nsp32_msg(KERN_ERR,
2745 "I/O region 0x%lx+0x%lx is already used",
2746 data->BaseAddress, data->NumAddress);
2747 goto free_irq;
2748 }
2749
2750 ret = scsi_add_host(host, &pdev->dev);
2751 if (ret) {
2752 nsp32_msg(KERN_ERR, "failed to add scsi host");
2753 goto free_region;
2754 }
2755 scsi_scan_host(host);
2756 pci_set_drvdata(pdev, host);
2757 return 0;
2758
2759 free_region:
2760 release_region(host->io_port, host->n_io_port);
2761
2762 free_irq:
2763 free_irq(host->irq, data);
2764
2765 free_sg_list:
2766 pci_free_consistent(pdev, NSP32_SG_TABLE_SIZE,
2767 data->sg_list, data->sg_paddr);
2768
2769 free_autoparam:
2770 pci_free_consistent(pdev, sizeof(nsp32_autoparam),
2771 data->autoparam, data->auto_paddr);
2772
2773 scsi_unregister:
2774 scsi_host_put(host);
2775
2776 err:
2777 return 1;
2778}
2779
2780static int nsp32_release(struct Scsi_Host *host)
2781{
2782 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
2783
2784 if (data->autoparam) {
2785 pci_free_consistent(data->Pci, sizeof(nsp32_autoparam),
2786 data->autoparam, data->auto_paddr);
2787 }
2788
2789 if (data->sg_list) {
2790 pci_free_consistent(data->Pci, NSP32_SG_TABLE_SIZE,
2791 data->sg_list, data->sg_paddr);
2792 }
2793
2794 if (host->irq) {
2795 free_irq(host->irq, data);
2796 }
2797
2798 if (host->io_port && host->n_io_port) {
2799 release_region(host->io_port, host->n_io_port);
2800 }
2801
2802 if (data->MmioAddress) {
2803 iounmap(data->MmioAddress);
2804 }
2805
2806 return 0;
2807}
2808
2809static const char *nsp32_info(struct Scsi_Host *shpnt)
2810{
2811 nsp32_hw_data *data = (nsp32_hw_data *)shpnt->hostdata;
2812
2813 return data->info_str;
2814}
2815
2816
2817/****************************************************************************
2818 * error handler
2819 */
2820static int nsp32_eh_abort(struct scsi_cmnd *SCpnt)
2821{
2822 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2823 unsigned int base = SCpnt->device->host->io_port;
2824
2825 nsp32_msg(KERN_WARNING, "abort");
2826
2827 if (data->cur_lunt->SCpnt == NULL) {
2828 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort failed");
2829 return FAILED;
2830 }
2831
2832 if (data->cur_target->sync_flag & (SDTR_INITIATOR | SDTR_TARGET)) {
2833 /* reset SDTR negotiation */
2834 data->cur_target->sync_flag = 0;
2835 nsp32_set_async(data, data->cur_target);
2836 }
2837
2838 nsp32_write2(base, TRANSFER_CONTROL, 0);
2839 nsp32_write2(base, BM_CNT, 0);
2840
2841 SCpnt->result = DID_ABORT << 16;
2842 nsp32_scsi_done(SCpnt);
2843
2844 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort success");
2845 return SUCCESS;
2846}
2847
2848static int nsp32_eh_bus_reset(struct scsi_cmnd *SCpnt)
2849{
2850 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
2851 unsigned int base = SCpnt->device->host->io_port;
2852
2853 spin_lock_irq(SCpnt->device->host->host_lock);
2854
2855 nsp32_msg(KERN_INFO, "Bus Reset");
2856 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
2857
2858 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
2859 nsp32_do_bus_reset(data);
2860 nsp32_write2(base, IRQ_CONTROL, 0);
2861
2862 spin_unlock_irq(SCpnt->device->host->host_lock);
2863 return SUCCESS; /* SCSI bus reset is succeeded at any time. */
2864}
2865
2866static void nsp32_do_bus_reset(nsp32_hw_data *data)
2867{
2868 unsigned int base = data->BaseAddress;
2869 unsigned short intrdat;
2870 int i;
2871
2872 nsp32_dbg(NSP32_DEBUG_BUSRESET, "in");
2873
2874 /*
2875 * stop all transfer
2876 * clear TRANSFERCONTROL_BM_START
2877 * clear counter
2878 */
2879 nsp32_write2(base, TRANSFER_CONTROL, 0);
2880 nsp32_write4(base, BM_CNT, 0);
2881 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
2882
2883 /*
2884 * fall back to asynchronous transfer mode
2885 * initialize SDTR negotiation flag
2886 */
2887 for (i = 0; i < ARRAY_SIZE(data->target); i++) {
2888 nsp32_target *target = &data->target[i];
2889
2890 target->sync_flag = 0;
2891 nsp32_set_async(data, target);
2892 }
2893
2894 /*
2895 * reset SCSI bus
2896 */
2897 nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
2898 mdelay(RESET_HOLD_TIME / 1000);
2899 nsp32_write1(base, SCSI_BUS_CONTROL, 0);
2900 for(i = 0; i < 5; i++) {
2901 intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
2902 nsp32_dbg(NSP32_DEBUG_BUSRESET, "irq:1: 0x%x", intrdat);
2903 }
2904
2905 data->CurrentSC = NULL;
2906}
2907
2908static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt)
2909{
2910 struct Scsi_Host *host = SCpnt->device->host;
2911 unsigned int base = SCpnt->device->host->io_port;
2912 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
2913
2914 nsp32_msg(KERN_INFO, "Host Reset");
2915 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
2916
2917 spin_lock_irq(SCpnt->device->host->host_lock);
2918
2919 nsp32hw_init(data);
2920 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
2921 nsp32_do_bus_reset(data);
2922 nsp32_write2(base, IRQ_CONTROL, 0);
2923
2924 spin_unlock_irq(SCpnt->device->host->host_lock);
2925 return SUCCESS; /* Host reset is succeeded at any time. */
2926}
2927
2928
2929/**************************************************************************
2930 * EEPROM handler
2931 */
2932
2933/*
2934 * getting EEPROM parameter
2935 */
2936static int nsp32_getprom_param(nsp32_hw_data *data)
2937{
2938 int vendor = data->pci_devid->vendor;
2939 int device = data->pci_devid->device;
2940 int ret, val, i;
2941
2942 /*
2943 * EEPROM checking.
2944 */
2945 ret = nsp32_prom_read(data, 0x7e);
2946 if (ret != 0x55) {
2947 nsp32_msg(KERN_INFO, "No EEPROM detected: 0x%x", ret);
2948 return FALSE;
2949 }
2950 ret = nsp32_prom_read(data, 0x7f);
2951 if (ret != 0xaa) {
2952 nsp32_msg(KERN_INFO, "Invalid number: 0x%x", ret);
2953 return FALSE;
2954 }
2955
2956 /*
2957 * check EEPROM type
2958 */
2959 if (vendor == PCI_VENDOR_ID_WORKBIT &&
2960 device == PCI_DEVICE_ID_WORKBIT_STANDARD) {
2961 ret = nsp32_getprom_c16(data);
2962 } else if (vendor == PCI_VENDOR_ID_WORKBIT &&
2963 device == PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC) {
2964 ret = nsp32_getprom_at24(data);
2965 } else if (vendor == PCI_VENDOR_ID_WORKBIT &&
2966 device == PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO ) {
2967 ret = nsp32_getprom_at24(data);
2968 } else {
2969 nsp32_msg(KERN_WARNING, "Unknown EEPROM");
2970 ret = FALSE;
2971 }
2972
2973 /* for debug : SPROM data full checking */
2974 for (i = 0; i <= 0x1f; i++) {
2975 val = nsp32_prom_read(data, i);
2976 nsp32_dbg(NSP32_DEBUG_EEPROM,
2977 "rom address 0x%x : 0x%x", i, val);
2978 }
2979
2980 return ret;
2981}
2982
2983
2984/*
2985 * AT24C01A (Logitec: LHA-600S), AT24C02 (Melco Buffalo: IFC-USLP) data map:
2986 *
2987 * ROMADDR
2988 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
2989 * Value 0x0: ASYNC, 0x0c: Ultra-20M, 0x19: Fast-10M
2990 * 0x07 : HBA Synchronous Transfer Period
2991 * Value 0: AutoSync, 1: Manual Setting
2992 * 0x08 - 0x0f : Not Used? (0x0)
2993 * 0x10 : Bus Termination
2994 * Value 0: Auto[ON], 1: ON, 2: OFF
2995 * 0x11 : Not Used? (0)
2996 * 0x12 : Bus Reset Delay Time (0x03)
2997 * 0x13 : Bootable CD Support
2998 * Value 0: Disable, 1: Enable
2999 * 0x14 : Device Scan
3000 * Bit 7 6 5 4 3 2 1 0
3001 * | <----------------->
3002 * | SCSI ID: Value 0: Skip, 1: YES
3003 * |-> Value 0: ALL scan, Value 1: Manual
3004 * 0x15 - 0x1b : Not Used? (0)
3005 * 0x1c : Constant? (0x01) (clock div?)
3006 * 0x1d - 0x7c : Not Used (0xff)
3007 * 0x7d : Not Used? (0xff)
3008 * 0x7e : Constant (0x55), Validity signature
3009 * 0x7f : Constant (0xaa), Validity signature
3010 */
3011static int nsp32_getprom_at24(nsp32_hw_data *data)
3012{
3013 int ret, i;
3014 int auto_sync;
3015 nsp32_target *target;
3016 int entry;
3017
3018 /*
3019 * Reset time which is designated by EEPROM.
3020 *
3021 * TODO: Not used yet.
3022 */
3023 data->resettime = nsp32_prom_read(data, 0x12);
3024
3025 /*
3026 * HBA Synchronous Transfer Period
3027 *
3028 * Note: auto_sync = 0: auto, 1: manual. Ninja SCSI HBA spec says
3029 * that if auto_sync is 0 (auto), and connected SCSI devices are
3030 * same or lower than 3, then transfer speed is set as ULTRA-20M.
3031 * On the contrary if connected SCSI devices are same or higher
3032 * than 4, then transfer speed is set as FAST-10M.
3033 *
3034 * I break this rule. The number of connected SCSI devices are
3035 * only ignored. If auto_sync is 0 (auto), then transfer speed is
3036 * forced as ULTRA-20M.
3037 */
3038 ret = nsp32_prom_read(data, 0x07);
3039 switch (ret) {
3040 case 0:
3041 auto_sync = TRUE;
3042 break;
3043 case 1:
3044 auto_sync = FALSE;
3045 break;
3046 default:
3047 nsp32_msg(KERN_WARNING,
3048 "Unsupported Auto Sync mode. Fall back to manual mode.");
3049 auto_sync = TRUE;
3050 }
3051
3052 if (trans_mode == ULTRA20M_MODE) {
3053 auto_sync = TRUE;
3054 }
3055
3056 /*
3057 * each device Synchronous Transfer Period
3058 */
3059 for (i = 0; i < NSP32_HOST_SCSIID; i++) {
3060 target = &data->target[i];
3061 if (auto_sync == TRUE) {
3062 target->limit_entry = 0; /* set as ULTRA20M */
3063 } else {
3064 ret = nsp32_prom_read(data, i);
3065 entry = nsp32_search_period_entry(data, target, ret);
3066 if (entry < 0) {
3067 /* search failed... set maximum speed */
3068 entry = 0;
3069 }
3070 target->limit_entry = entry;
3071 }
3072 }
3073
3074 return TRUE;
3075}
3076
3077
3078/*
3079 * C16 110 (I-O Data: SC-NBD) data map:
3080 *
3081 * ROMADDR
3082 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
3083 * Value 0x0: 20MB/S, 0x1: 10MB/S, 0x2: 5MB/S, 0x3: ASYNC
3084 * 0x07 : 0 (HBA Synchronous Transfer Period: Auto Sync)
3085 * 0x08 - 0x0f : Not Used? (0x0)
3086 * 0x10 : Transfer Mode
3087 * Value 0: PIO, 1: Busmater
3088 * 0x11 : Bus Reset Delay Time (0x00-0x20)
3089 * 0x12 : Bus Termination
3090 * Value 0: Disable, 1: Enable
3091 * 0x13 - 0x19 : Disconnection
3092 * Value 0: Disable, 1: Enable
3093 * 0x1a - 0x7c : Not Used? (0)
3094 * 0x7d : Not Used? (0xf8)
3095 * 0x7e : Constant (0x55), Validity signature
3096 * 0x7f : Constant (0xaa), Validity signature
3097 */
3098static int nsp32_getprom_c16(nsp32_hw_data *data)
3099{
3100 int ret, i;
3101 nsp32_target *target;
3102 int entry, val;
3103
3104 /*
3105 * Reset time which is designated by EEPROM.
3106 *
3107 * TODO: Not used yet.
3108 */
3109 data->resettime = nsp32_prom_read(data, 0x11);
3110
3111 /*
3112 * each device Synchronous Transfer Period
3113 */
3114 for (i = 0; i < NSP32_HOST_SCSIID; i++) {
3115 target = &data->target[i];
3116 ret = nsp32_prom_read(data, i);
3117 switch (ret) {
3118 case 0: /* 20MB/s */
3119 val = 0x0c;
3120 break;
3121 case 1: /* 10MB/s */
3122 val = 0x19;
3123 break;
3124 case 2: /* 5MB/s */
3125 val = 0x32;
3126 break;
3127 case 3: /* ASYNC */
3128 val = 0x00;
3129 break;
3130 default: /* default 20MB/s */
3131 val = 0x0c;
3132 break;
3133 }
3134 entry = nsp32_search_period_entry(data, target, val);
3135 if (entry < 0 || trans_mode == ULTRA20M_MODE) {
3136 /* search failed... set maximum speed */
3137 entry = 0;
3138 }
3139 target->limit_entry = entry;
3140 }
3141
3142 return TRUE;
3143}
3144
3145
3146/*
3147 * Atmel AT24C01A (drived in 5V) serial EEPROM routines
3148 */
3149static int nsp32_prom_read(nsp32_hw_data *data, int romaddr)
3150{
3151 int i, val;
3152
3153 /* start condition */
3154 nsp32_prom_start(data);
3155
3156 /* device address */
3157 nsp32_prom_write_bit(data, 1); /* 1 */
3158 nsp32_prom_write_bit(data, 0); /* 0 */
3159 nsp32_prom_write_bit(data, 1); /* 1 */
3160 nsp32_prom_write_bit(data, 0); /* 0 */
3161 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */
3162 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */
3163 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */
3164
3165 /* R/W: W for dummy write */
3166 nsp32_prom_write_bit(data, 0);
3167
3168 /* ack */
3169 nsp32_prom_write_bit(data, 0);
3170
3171 /* word address */
3172 for (i = 7; i >= 0; i--) {
3173 nsp32_prom_write_bit(data, ((romaddr >> i) & 1));
3174 }
3175
3176 /* ack */
3177 nsp32_prom_write_bit(data, 0);
3178
3179 /* start condition */
3180 nsp32_prom_start(data);
3181
3182 /* device address */
3183 nsp32_prom_write_bit(data, 1); /* 1 */
3184 nsp32_prom_write_bit(data, 0); /* 0 */
3185 nsp32_prom_write_bit(data, 1); /* 1 */
3186 nsp32_prom_write_bit(data, 0); /* 0 */
3187 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */
3188 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */
3189 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */
3190
3191 /* R/W: R */
3192 nsp32_prom_write_bit(data, 1);
3193
3194 /* ack */
3195 nsp32_prom_write_bit(data, 0);
3196
3197 /* data... */
3198 val = 0;
3199 for (i = 7; i >= 0; i--) {
3200 val += (nsp32_prom_read_bit(data) << i);
3201 }
3202
3203 /* no ack */
3204 nsp32_prom_write_bit(data, 1);
3205
3206 /* stop condition */
3207 nsp32_prom_stop(data);
3208
3209 return val;
3210}
3211
3212static void nsp32_prom_set(nsp32_hw_data *data, int bit, int val)
3213{
3214 int base = data->BaseAddress;
3215 int tmp;
3216
3217 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL);
3218
3219 if (val == 0) {
3220 tmp &= ~bit;
3221 } else {
3222 tmp |= bit;
3223 }
3224
3225 nsp32_index_write1(base, SERIAL_ROM_CTL, tmp);
3226
3227 udelay(10);
3228}
3229
3230static int nsp32_prom_get(nsp32_hw_data *data, int bit)
3231{
3232 int base = data->BaseAddress;
3233 int tmp, ret;
3234
3235 if (bit != SDA) {
3236 nsp32_msg(KERN_ERR, "return value is not appropriate");
3237 return 0;
3238 }
3239
3240
3241 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL) & bit;
3242
3243 if (tmp == 0) {
3244 ret = 0;
3245 } else {
3246 ret = 1;
3247 }
3248
3249 udelay(10);
3250
3251 return ret;
3252}
3253
3254static void nsp32_prom_start (nsp32_hw_data *data)
3255{
3256 /* start condition */
3257 nsp32_prom_set(data, SCL, 1);
3258 nsp32_prom_set(data, SDA, 1);
3259 nsp32_prom_set(data, ENA, 1); /* output mode */
3260 nsp32_prom_set(data, SDA, 0); /* keeping SCL=1 and transiting
3261 * SDA 1->0 is start condition */
3262 nsp32_prom_set(data, SCL, 0);
3263}
3264
3265static void nsp32_prom_stop (nsp32_hw_data *data)
3266{
3267 /* stop condition */
3268 nsp32_prom_set(data, SCL, 1);
3269 nsp32_prom_set(data, SDA, 0);
3270 nsp32_prom_set(data, ENA, 1); /* output mode */
3271 nsp32_prom_set(data, SDA, 1);
3272 nsp32_prom_set(data, SCL, 0);
3273}
3274
3275static void nsp32_prom_write_bit(nsp32_hw_data *data, int val)
3276{
3277 /* write */
3278 nsp32_prom_set(data, SDA, val);
3279 nsp32_prom_set(data, SCL, 1 );
3280 nsp32_prom_set(data, SCL, 0 );
3281}
3282
3283static int nsp32_prom_read_bit(nsp32_hw_data *data)
3284{
3285 int val;
3286
3287 /* read */
3288 nsp32_prom_set(data, ENA, 0); /* input mode */
3289 nsp32_prom_set(data, SCL, 1);
3290
3291 val = nsp32_prom_get(data, SDA);
3292
3293 nsp32_prom_set(data, SCL, 0);
3294 nsp32_prom_set(data, ENA, 1); /* output mode */
3295
3296 return val;
3297}
3298
3299
3300/**************************************************************************
3301 * Power Management
3302 */
3303#ifdef CONFIG_PM
3304
3305/* Device suspended */
3306static int nsp32_suspend(struct pci_dev *pdev, pm_message_t state)
3307{
3308 struct Scsi_Host *host = pci_get_drvdata(pdev);
3309
3310 nsp32_msg(KERN_INFO, "pci-suspend: pdev=0x%p, state=%ld, slot=%s, host=0x%p", pdev, state, pci_name(pdev), host);
3311
3312 pci_save_state (pdev);
3313 pci_disable_device (pdev);
3314 pci_set_power_state(pdev, pci_choose_state(pdev, state));
3315
3316 return 0;
3317}
3318
3319/* Device woken up */
3320static int nsp32_resume(struct pci_dev *pdev)
3321{
3322 struct Scsi_Host *host = pci_get_drvdata(pdev);
3323 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
3324 unsigned short reg;
3325
3326 nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p", pdev, pci_name(pdev), host);
3327
3328 pci_set_power_state(pdev, PCI_D0);
3329 pci_enable_wake (pdev, PCI_D0, 0);
3330 pci_restore_state (pdev);
3331
3332 reg = nsp32_read2(data->BaseAddress, INDEX_REG);
3333
3334 nsp32_msg(KERN_INFO, "io=0x%x reg=0x%x", data->BaseAddress, reg);
3335
3336 if (reg == 0xffff) {
3337 nsp32_msg(KERN_INFO, "missing device. abort resume.");
3338 return 0;
3339 }
3340
3341 nsp32hw_init (data);
3342 nsp32_do_bus_reset(data);
3343
3344 nsp32_msg(KERN_INFO, "resume success");
3345
3346 return 0;
3347}
3348
3349#endif
3350
3351/************************************************************************
3352 * PCI/Cardbus probe/remove routine
3353 */
3354static int nsp32_probe(struct pci_dev *pdev, const struct pci_device_id *id)
3355{
3356 int ret;
3357 nsp32_hw_data *data = &nsp32_data_base;
3358
3359 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
3360
3361 ret = pci_enable_device(pdev);
3362 if (ret) {
3363 nsp32_msg(KERN_ERR, "failed to enable pci device");
3364 return ret;
3365 }
3366
3367 data->Pci = pdev;
3368 data->pci_devid = id;
3369 data->IrqNumber = pdev->irq;
3370 data->BaseAddress = pci_resource_start(pdev, 0);
3371 data->NumAddress = pci_resource_len (pdev, 0);
3372 data->MmioAddress = pci_ioremap_bar(pdev, 1);
3373 data->MmioLength = pci_resource_len (pdev, 1);
3374
3375 pci_set_master(pdev);
3376
3377 ret = nsp32_detect(pdev);
3378
3379 nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s",
3380 pdev->irq,
3381 data->MmioAddress, data->MmioLength,
3382 pci_name(pdev),
3383 nsp32_model[id->driver_data]);
3384
3385 nsp32_dbg(NSP32_DEBUG_REGISTER, "exit %d", ret);
3386
3387 return ret;
3388}
3389
3390static void nsp32_remove(struct pci_dev *pdev)
3391{
3392 struct Scsi_Host *host = pci_get_drvdata(pdev);
3393
3394 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
3395
3396 scsi_remove_host(host);
3397
3398 nsp32_release(host);
3399
3400 scsi_host_put(host);
3401}
3402
3403static struct pci_driver nsp32_driver = {
3404 .name = "nsp32",
3405 .id_table = nsp32_pci_table,
3406 .probe = nsp32_probe,
3407 .remove = nsp32_remove,
3408#ifdef CONFIG_PM
3409 .suspend = nsp32_suspend,
3410 .resume = nsp32_resume,
3411#endif
3412};
3413
3414/*********************************************************************
3415 * Moule entry point
3416 */
3417static int __init init_nsp32(void) {
3418 nsp32_msg(KERN_INFO, "loading...");
3419 return pci_register_driver(&nsp32_driver);
3420}
3421
3422static void __exit exit_nsp32(void) {
3423 nsp32_msg(KERN_INFO, "unloading...");
3424 pci_unregister_driver(&nsp32_driver);
3425}
3426
3427module_init(init_nsp32);
3428module_exit(exit_nsp32);
3429
3430/* end */