Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Microchip KSZ9477 switch driver main logic
4 *
5 * Copyright (C) 2017-2019 Microchip Technology Inc.
6 */
7
8#include <linux/kernel.h>
9#include <linux/module.h>
10#include <linux/iopoll.h>
11#include <linux/platform_data/microchip-ksz.h>
12#include <linux/phy.h>
13#include <linux/if_bridge.h>
14#include <net/dsa.h>
15#include <net/switchdev.h>
16
17#include "ksz9477_reg.h"
18#include "ksz_common.h"
19
20/* Used with variable features to indicate capabilities. */
21#define GBIT_SUPPORT BIT(0)
22#define NEW_XMII BIT(1)
23#define IS_9893 BIT(2)
24
25static const struct {
26 int index;
27 char string[ETH_GSTRING_LEN];
28} ksz9477_mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
29 { 0x00, "rx_hi" },
30 { 0x01, "rx_undersize" },
31 { 0x02, "rx_fragments" },
32 { 0x03, "rx_oversize" },
33 { 0x04, "rx_jabbers" },
34 { 0x05, "rx_symbol_err" },
35 { 0x06, "rx_crc_err" },
36 { 0x07, "rx_align_err" },
37 { 0x08, "rx_mac_ctrl" },
38 { 0x09, "rx_pause" },
39 { 0x0A, "rx_bcast" },
40 { 0x0B, "rx_mcast" },
41 { 0x0C, "rx_ucast" },
42 { 0x0D, "rx_64_or_less" },
43 { 0x0E, "rx_65_127" },
44 { 0x0F, "rx_128_255" },
45 { 0x10, "rx_256_511" },
46 { 0x11, "rx_512_1023" },
47 { 0x12, "rx_1024_1522" },
48 { 0x13, "rx_1523_2000" },
49 { 0x14, "rx_2001" },
50 { 0x15, "tx_hi" },
51 { 0x16, "tx_late_col" },
52 { 0x17, "tx_pause" },
53 { 0x18, "tx_bcast" },
54 { 0x19, "tx_mcast" },
55 { 0x1A, "tx_ucast" },
56 { 0x1B, "tx_deferred" },
57 { 0x1C, "tx_total_col" },
58 { 0x1D, "tx_exc_col" },
59 { 0x1E, "tx_single_col" },
60 { 0x1F, "tx_mult_col" },
61 { 0x80, "rx_total" },
62 { 0x81, "tx_total" },
63 { 0x82, "rx_discards" },
64 { 0x83, "tx_discards" },
65};
66
67static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
68{
69 regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
70}
71
72static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
73 bool set)
74{
75 regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
76 bits, set ? bits : 0);
77}
78
79static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
80{
81 regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0);
82}
83
84static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
85 u32 bits, bool set)
86{
87 regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset),
88 bits, set ? bits : 0);
89}
90
91static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
92{
93 unsigned int val;
94
95 return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL,
96 val, !(val & VLAN_START), 10, 1000);
97}
98
99static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid,
100 u32 *vlan_table)
101{
102 int ret;
103
104 mutex_lock(&dev->vlan_mutex);
105
106 ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
107 ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
108
109 /* wait to be cleared */
110 ret = ksz9477_wait_vlan_ctrl_ready(dev);
111 if (ret) {
112 dev_dbg(dev->dev, "Failed to read vlan table\n");
113 goto exit;
114 }
115
116 ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
117 ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
118 ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
119
120 ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
121
122exit:
123 mutex_unlock(&dev->vlan_mutex);
124
125 return ret;
126}
127
128static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid,
129 u32 *vlan_table)
130{
131 int ret;
132
133 mutex_lock(&dev->vlan_mutex);
134
135 ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
136 ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
137 ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
138
139 ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
140 ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
141
142 /* wait to be cleared */
143 ret = ksz9477_wait_vlan_ctrl_ready(dev);
144 if (ret) {
145 dev_dbg(dev->dev, "Failed to write vlan table\n");
146 goto exit;
147 }
148
149 ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
150
151 /* update vlan cache table */
152 dev->vlan_cache[vid].table[0] = vlan_table[0];
153 dev->vlan_cache[vid].table[1] = vlan_table[1];
154 dev->vlan_cache[vid].table[2] = vlan_table[2];
155
156exit:
157 mutex_unlock(&dev->vlan_mutex);
158
159 return ret;
160}
161
162static void ksz9477_read_table(struct ksz_device *dev, u32 *table)
163{
164 ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
165 ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
166 ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
167 ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
168}
169
170static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
171{
172 ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
173 ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
174 ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
175 ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
176}
177
178static int ksz9477_wait_alu_ready(struct ksz_device *dev)
179{
180 unsigned int val;
181
182 return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4,
183 val, !(val & ALU_START), 10, 1000);
184}
185
186static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev)
187{
188 unsigned int val;
189
190 return regmap_read_poll_timeout(dev->regmap[2],
191 REG_SW_ALU_STAT_CTRL__4,
192 val, !(val & ALU_STAT_START),
193 10, 1000);
194}
195
196static int ksz9477_reset_switch(struct ksz_device *dev)
197{
198 u8 data8;
199 u32 data32;
200
201 /* reset switch */
202 ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
203
204 /* turn off SPI DO Edge select */
205 regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0,
206 SPI_AUTO_EDGE_DETECTION, 0);
207
208 /* default configuration */
209 ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
210 data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
211 SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
212 ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
213
214 /* disable interrupts */
215 ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
216 ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
217 ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
218
219 /* set broadcast storm protection 10% rate */
220 regmap_update_bits(dev->regmap[1], REG_SW_MAC_CTRL_2,
221 BROADCAST_STORM_RATE,
222 (BROADCAST_STORM_VALUE *
223 BROADCAST_STORM_PROT_RATE) / 100);
224
225 if (dev->synclko_125)
226 ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1,
227 SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ);
228
229 return 0;
230}
231
232static void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
233 u64 *cnt)
234{
235 struct ksz_port *p = &dev->ports[port];
236 unsigned int val;
237 u32 data;
238 int ret;
239
240 /* retain the flush/freeze bit */
241 data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
242 data |= MIB_COUNTER_READ;
243 data |= (addr << MIB_COUNTER_INDEX_S);
244 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
245
246 ret = regmap_read_poll_timeout(dev->regmap[2],
247 PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4),
248 val, !(val & MIB_COUNTER_READ), 10, 1000);
249 /* failed to read MIB. get out of loop */
250 if (ret) {
251 dev_dbg(dev->dev, "Failed to get MIB\n");
252 return;
253 }
254
255 /* count resets upon read */
256 ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
257 *cnt += data;
258}
259
260static void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
261 u64 *dropped, u64 *cnt)
262{
263 addr = ksz9477_mib_names[addr].index;
264 ksz9477_r_mib_cnt(dev, port, addr, cnt);
265}
266
267static void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
268{
269 u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
270 struct ksz_port *p = &dev->ports[port];
271
272 /* enable/disable the port for flush/freeze function */
273 mutex_lock(&p->mib.cnt_mutex);
274 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val);
275
276 /* used by MIB counter reading code to know freeze is enabled */
277 p->freeze = freeze;
278 mutex_unlock(&p->mib.cnt_mutex);
279}
280
281static void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
282{
283 struct ksz_port_mib *mib = &dev->ports[port].mib;
284
285 /* flush all enabled port MIB counters */
286 mutex_lock(&mib->cnt_mutex);
287 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
288 MIB_COUNTER_FLUSH_FREEZE);
289 ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH);
290 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0);
291 mutex_unlock(&mib->cnt_mutex);
292
293 mib->cnt_ptr = 0;
294 memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
295}
296
297static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
298 int port,
299 enum dsa_tag_protocol mp)
300{
301 enum dsa_tag_protocol proto = DSA_TAG_PROTO_KSZ9477;
302 struct ksz_device *dev = ds->priv;
303
304 if (dev->features & IS_9893)
305 proto = DSA_TAG_PROTO_KSZ9893;
306 return proto;
307}
308
309static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
310{
311 struct ksz_device *dev = ds->priv;
312 u16 val = 0xffff;
313
314 /* No real PHY after this. Simulate the PHY.
315 * A fixed PHY can be setup in the device tree, but this function is
316 * still called for that port during initialization.
317 * For RGMII PHY there is no way to access it so the fixed PHY should
318 * be used. For SGMII PHY the supporting code will be added later.
319 */
320 if (addr >= dev->phy_port_cnt) {
321 struct ksz_port *p = &dev->ports[addr];
322
323 switch (reg) {
324 case MII_BMCR:
325 val = 0x1140;
326 break;
327 case MII_BMSR:
328 val = 0x796d;
329 break;
330 case MII_PHYSID1:
331 val = 0x0022;
332 break;
333 case MII_PHYSID2:
334 val = 0x1631;
335 break;
336 case MII_ADVERTISE:
337 val = 0x05e1;
338 break;
339 case MII_LPA:
340 val = 0xc5e1;
341 break;
342 case MII_CTRL1000:
343 val = 0x0700;
344 break;
345 case MII_STAT1000:
346 if (p->phydev.speed == SPEED_1000)
347 val = 0x3800;
348 else
349 val = 0;
350 break;
351 }
352 } else {
353 ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
354 }
355
356 return val;
357}
358
359static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
360 u16 val)
361{
362 struct ksz_device *dev = ds->priv;
363
364 /* No real PHY after this. */
365 if (addr >= dev->phy_port_cnt)
366 return 0;
367
368 /* No gigabit support. Do not write to this register. */
369 if (!(dev->features & GBIT_SUPPORT) && reg == MII_CTRL1000)
370 return 0;
371 ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
372
373 return 0;
374}
375
376static void ksz9477_get_strings(struct dsa_switch *ds, int port,
377 u32 stringset, uint8_t *buf)
378{
379 int i;
380
381 if (stringset != ETH_SS_STATS)
382 return;
383
384 for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
385 memcpy(buf + i * ETH_GSTRING_LEN, ksz9477_mib_names[i].string,
386 ETH_GSTRING_LEN);
387 }
388}
389
390static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
391 u8 member)
392{
393 ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
394 dev->ports[port].member = member;
395}
396
397static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
398 u8 state)
399{
400 struct ksz_device *dev = ds->priv;
401 struct ksz_port *p = &dev->ports[port];
402 u8 data;
403 int member = -1;
404 int forward = dev->member;
405
406 ksz_pread8(dev, port, P_STP_CTRL, &data);
407 data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
408
409 switch (state) {
410 case BR_STATE_DISABLED:
411 data |= PORT_LEARN_DISABLE;
412 if (port != dev->cpu_port)
413 member = 0;
414 break;
415 case BR_STATE_LISTENING:
416 data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
417 if (port != dev->cpu_port &&
418 p->stp_state == BR_STATE_DISABLED)
419 member = dev->host_mask | p->vid_member;
420 break;
421 case BR_STATE_LEARNING:
422 data |= PORT_RX_ENABLE;
423 break;
424 case BR_STATE_FORWARDING:
425 data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
426
427 /* This function is also used internally. */
428 if (port == dev->cpu_port)
429 break;
430
431 member = dev->host_mask | p->vid_member;
432 mutex_lock(&dev->dev_mutex);
433
434 /* Port is a member of a bridge. */
435 if (dev->br_member & (1 << port)) {
436 dev->member |= (1 << port);
437 member = dev->member;
438 }
439 mutex_unlock(&dev->dev_mutex);
440 break;
441 case BR_STATE_BLOCKING:
442 data |= PORT_LEARN_DISABLE;
443 if (port != dev->cpu_port &&
444 p->stp_state == BR_STATE_DISABLED)
445 member = dev->host_mask | p->vid_member;
446 break;
447 default:
448 dev_err(ds->dev, "invalid STP state: %d\n", state);
449 return;
450 }
451
452 ksz_pwrite8(dev, port, P_STP_CTRL, data);
453 p->stp_state = state;
454 mutex_lock(&dev->dev_mutex);
455 /* Port membership may share register with STP state. */
456 if (member >= 0 && member != p->member)
457 ksz9477_cfg_port_member(dev, port, (u8)member);
458
459 /* Check if forwarding needs to be updated. */
460 if (state != BR_STATE_FORWARDING) {
461 if (dev->br_member & (1 << port))
462 dev->member &= ~(1 << port);
463 }
464
465 /* When topology has changed the function ksz_update_port_member
466 * should be called to modify port forwarding behavior.
467 */
468 if (forward != dev->member)
469 ksz_update_port_member(dev, port);
470 mutex_unlock(&dev->dev_mutex);
471}
472
473static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
474{
475 u8 data;
476
477 regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2,
478 SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S,
479 SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
480
481 if (port < dev->port_cnt) {
482 /* flush individual port */
483 ksz_pread8(dev, port, P_STP_CTRL, &data);
484 if (!(data & PORT_LEARN_DISABLE))
485 ksz_pwrite8(dev, port, P_STP_CTRL,
486 data | PORT_LEARN_DISABLE);
487 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
488 ksz_pwrite8(dev, port, P_STP_CTRL, data);
489 } else {
490 /* flush all */
491 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
492 }
493}
494
495static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
496 bool flag,
497 struct netlink_ext_ack *extack)
498{
499 struct ksz_device *dev = ds->priv;
500
501 if (flag) {
502 ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
503 PORT_VLAN_LOOKUP_VID_0, true);
504 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
505 } else {
506 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
507 ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
508 PORT_VLAN_LOOKUP_VID_0, false);
509 }
510
511 return 0;
512}
513
514static int ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
515 const struct switchdev_obj_port_vlan *vlan,
516 struct netlink_ext_ack *extack)
517{
518 struct ksz_device *dev = ds->priv;
519 u32 vlan_table[3];
520 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
521 int err;
522
523 err = ksz9477_get_vlan_table(dev, vlan->vid, vlan_table);
524 if (err) {
525 NL_SET_ERR_MSG_MOD(extack, "Failed to get vlan table");
526 return err;
527 }
528
529 vlan_table[0] = VLAN_VALID | (vlan->vid & VLAN_FID_M);
530 if (untagged)
531 vlan_table[1] |= BIT(port);
532 else
533 vlan_table[1] &= ~BIT(port);
534 vlan_table[1] &= ~(BIT(dev->cpu_port));
535
536 vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
537
538 err = ksz9477_set_vlan_table(dev, vlan->vid, vlan_table);
539 if (err) {
540 NL_SET_ERR_MSG_MOD(extack, "Failed to set vlan table");
541 return err;
542 }
543
544 /* change PVID */
545 if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
546 ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vlan->vid);
547
548 return 0;
549}
550
551static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
552 const struct switchdev_obj_port_vlan *vlan)
553{
554 struct ksz_device *dev = ds->priv;
555 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
556 u32 vlan_table[3];
557 u16 pvid;
558
559 ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
560 pvid = pvid & 0xFFF;
561
562 if (ksz9477_get_vlan_table(dev, vlan->vid, vlan_table)) {
563 dev_dbg(dev->dev, "Failed to get vlan table\n");
564 return -ETIMEDOUT;
565 }
566
567 vlan_table[2] &= ~BIT(port);
568
569 if (pvid == vlan->vid)
570 pvid = 1;
571
572 if (untagged)
573 vlan_table[1] &= ~BIT(port);
574
575 if (ksz9477_set_vlan_table(dev, vlan->vid, vlan_table)) {
576 dev_dbg(dev->dev, "Failed to set vlan table\n");
577 return -ETIMEDOUT;
578 }
579
580 ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
581
582 return 0;
583}
584
585static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
586 const unsigned char *addr, u16 vid)
587{
588 struct ksz_device *dev = ds->priv;
589 u32 alu_table[4];
590 u32 data;
591 int ret = 0;
592
593 mutex_lock(&dev->alu_mutex);
594
595 /* find any entry with mac & vid */
596 data = vid << ALU_FID_INDEX_S;
597 data |= ((addr[0] << 8) | addr[1]);
598 ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
599
600 data = ((addr[2] << 24) | (addr[3] << 16));
601 data |= ((addr[4] << 8) | addr[5]);
602 ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
603
604 /* start read operation */
605 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
606
607 /* wait to be finished */
608 ret = ksz9477_wait_alu_ready(dev);
609 if (ret) {
610 dev_dbg(dev->dev, "Failed to read ALU\n");
611 goto exit;
612 }
613
614 /* read ALU entry */
615 ksz9477_read_table(dev, alu_table);
616
617 /* update ALU entry */
618 alu_table[0] = ALU_V_STATIC_VALID;
619 alu_table[1] |= BIT(port);
620 if (vid)
621 alu_table[1] |= ALU_V_USE_FID;
622 alu_table[2] = (vid << ALU_V_FID_S);
623 alu_table[2] |= ((addr[0] << 8) | addr[1]);
624 alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
625 alu_table[3] |= ((addr[4] << 8) | addr[5]);
626
627 ksz9477_write_table(dev, alu_table);
628
629 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
630
631 /* wait to be finished */
632 ret = ksz9477_wait_alu_ready(dev);
633 if (ret)
634 dev_dbg(dev->dev, "Failed to write ALU\n");
635
636exit:
637 mutex_unlock(&dev->alu_mutex);
638
639 return ret;
640}
641
642static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
643 const unsigned char *addr, u16 vid)
644{
645 struct ksz_device *dev = ds->priv;
646 u32 alu_table[4];
647 u32 data;
648 int ret = 0;
649
650 mutex_lock(&dev->alu_mutex);
651
652 /* read any entry with mac & vid */
653 data = vid << ALU_FID_INDEX_S;
654 data |= ((addr[0] << 8) | addr[1]);
655 ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
656
657 data = ((addr[2] << 24) | (addr[3] << 16));
658 data |= ((addr[4] << 8) | addr[5]);
659 ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
660
661 /* start read operation */
662 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
663
664 /* wait to be finished */
665 ret = ksz9477_wait_alu_ready(dev);
666 if (ret) {
667 dev_dbg(dev->dev, "Failed to read ALU\n");
668 goto exit;
669 }
670
671 ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
672 if (alu_table[0] & ALU_V_STATIC_VALID) {
673 ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
674 ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
675 ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
676
677 /* clear forwarding port */
678 alu_table[2] &= ~BIT(port);
679
680 /* if there is no port to forward, clear table */
681 if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
682 alu_table[0] = 0;
683 alu_table[1] = 0;
684 alu_table[2] = 0;
685 alu_table[3] = 0;
686 }
687 } else {
688 alu_table[0] = 0;
689 alu_table[1] = 0;
690 alu_table[2] = 0;
691 alu_table[3] = 0;
692 }
693
694 ksz9477_write_table(dev, alu_table);
695
696 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
697
698 /* wait to be finished */
699 ret = ksz9477_wait_alu_ready(dev);
700 if (ret)
701 dev_dbg(dev->dev, "Failed to write ALU\n");
702
703exit:
704 mutex_unlock(&dev->alu_mutex);
705
706 return ret;
707}
708
709static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table)
710{
711 alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
712 alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
713 alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
714 alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
715 ALU_V_PRIO_AGE_CNT_M;
716 alu->mstp = alu_table[0] & ALU_V_MSTP_M;
717
718 alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
719 alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
720 alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
721
722 alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
723
724 alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
725 alu->mac[1] = alu_table[2] & 0xFF;
726 alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
727 alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
728 alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
729 alu->mac[5] = alu_table[3] & 0xFF;
730}
731
732static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
733 dsa_fdb_dump_cb_t *cb, void *data)
734{
735 struct ksz_device *dev = ds->priv;
736 int ret = 0;
737 u32 ksz_data;
738 u32 alu_table[4];
739 struct alu_struct alu;
740 int timeout;
741
742 mutex_lock(&dev->alu_mutex);
743
744 /* start ALU search */
745 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
746
747 do {
748 timeout = 1000;
749 do {
750 ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
751 if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
752 break;
753 usleep_range(1, 10);
754 } while (timeout-- > 0);
755
756 if (!timeout) {
757 dev_dbg(dev->dev, "Failed to search ALU\n");
758 ret = -ETIMEDOUT;
759 goto exit;
760 }
761
762 /* read ALU table */
763 ksz9477_read_table(dev, alu_table);
764
765 ksz9477_convert_alu(&alu, alu_table);
766
767 if (alu.port_forward & BIT(port)) {
768 ret = cb(alu.mac, alu.fid, alu.is_static, data);
769 if (ret)
770 goto exit;
771 }
772 } while (ksz_data & ALU_START);
773
774exit:
775
776 /* stop ALU search */
777 ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
778
779 mutex_unlock(&dev->alu_mutex);
780
781 return ret;
782}
783
784static int ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
785 const struct switchdev_obj_port_mdb *mdb)
786{
787 struct ksz_device *dev = ds->priv;
788 u32 static_table[4];
789 u32 data;
790 int index;
791 u32 mac_hi, mac_lo;
792 int err = 0;
793
794 mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
795 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
796 mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
797
798 mutex_lock(&dev->alu_mutex);
799
800 for (index = 0; index < dev->num_statics; index++) {
801 /* find empty slot first */
802 data = (index << ALU_STAT_INDEX_S) |
803 ALU_STAT_READ | ALU_STAT_START;
804 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
805
806 /* wait to be finished */
807 err = ksz9477_wait_alu_sta_ready(dev);
808 if (err) {
809 dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
810 goto exit;
811 }
812
813 /* read ALU static table */
814 ksz9477_read_table(dev, static_table);
815
816 if (static_table[0] & ALU_V_STATIC_VALID) {
817 /* check this has same vid & mac address */
818 if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
819 ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
820 static_table[3] == mac_lo) {
821 /* found matching one */
822 break;
823 }
824 } else {
825 /* found empty one */
826 break;
827 }
828 }
829
830 /* no available entry */
831 if (index == dev->num_statics) {
832 err = -ENOSPC;
833 goto exit;
834 }
835
836 /* add entry */
837 static_table[0] = ALU_V_STATIC_VALID;
838 static_table[1] |= BIT(port);
839 if (mdb->vid)
840 static_table[1] |= ALU_V_USE_FID;
841 static_table[2] = (mdb->vid << ALU_V_FID_S);
842 static_table[2] |= mac_hi;
843 static_table[3] = mac_lo;
844
845 ksz9477_write_table(dev, static_table);
846
847 data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
848 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
849
850 /* wait to be finished */
851 if (ksz9477_wait_alu_sta_ready(dev))
852 dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
853
854exit:
855 mutex_unlock(&dev->alu_mutex);
856 return err;
857}
858
859static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
860 const struct switchdev_obj_port_mdb *mdb)
861{
862 struct ksz_device *dev = ds->priv;
863 u32 static_table[4];
864 u32 data;
865 int index;
866 int ret = 0;
867 u32 mac_hi, mac_lo;
868
869 mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
870 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
871 mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
872
873 mutex_lock(&dev->alu_mutex);
874
875 for (index = 0; index < dev->num_statics; index++) {
876 /* find empty slot first */
877 data = (index << ALU_STAT_INDEX_S) |
878 ALU_STAT_READ | ALU_STAT_START;
879 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
880
881 /* wait to be finished */
882 ret = ksz9477_wait_alu_sta_ready(dev);
883 if (ret) {
884 dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
885 goto exit;
886 }
887
888 /* read ALU static table */
889 ksz9477_read_table(dev, static_table);
890
891 if (static_table[0] & ALU_V_STATIC_VALID) {
892 /* check this has same vid & mac address */
893
894 if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
895 ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
896 static_table[3] == mac_lo) {
897 /* found matching one */
898 break;
899 }
900 }
901 }
902
903 /* no available entry */
904 if (index == dev->num_statics)
905 goto exit;
906
907 /* clear port */
908 static_table[1] &= ~BIT(port);
909
910 if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
911 /* delete entry */
912 static_table[0] = 0;
913 static_table[1] = 0;
914 static_table[2] = 0;
915 static_table[3] = 0;
916 }
917
918 ksz9477_write_table(dev, static_table);
919
920 data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
921 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
922
923 /* wait to be finished */
924 ret = ksz9477_wait_alu_sta_ready(dev);
925 if (ret)
926 dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
927
928exit:
929 mutex_unlock(&dev->alu_mutex);
930
931 return ret;
932}
933
934static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
935 struct dsa_mall_mirror_tc_entry *mirror,
936 bool ingress)
937{
938 struct ksz_device *dev = ds->priv;
939
940 if (ingress)
941 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
942 else
943 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
944
945 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
946
947 /* configure mirror port */
948 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
949 PORT_MIRROR_SNIFFER, true);
950
951 ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
952
953 return 0;
954}
955
956static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
957 struct dsa_mall_mirror_tc_entry *mirror)
958{
959 struct ksz_device *dev = ds->priv;
960 u8 data;
961
962 if (mirror->ingress)
963 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
964 else
965 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
966
967 ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
968
969 if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
970 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
971 PORT_MIRROR_SNIFFER, false);
972}
973
974static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data)
975{
976 bool gbit;
977
978 if (dev->features & NEW_XMII)
979 gbit = !(data & PORT_MII_NOT_1GBIT);
980 else
981 gbit = !!(data & PORT_MII_1000MBIT_S1);
982 return gbit;
983}
984
985static void ksz9477_set_gbit(struct ksz_device *dev, bool gbit, u8 *data)
986{
987 if (dev->features & NEW_XMII) {
988 if (gbit)
989 *data &= ~PORT_MII_NOT_1GBIT;
990 else
991 *data |= PORT_MII_NOT_1GBIT;
992 } else {
993 if (gbit)
994 *data |= PORT_MII_1000MBIT_S1;
995 else
996 *data &= ~PORT_MII_1000MBIT_S1;
997 }
998}
999
1000static int ksz9477_get_xmii(struct ksz_device *dev, u8 data)
1001{
1002 int mode;
1003
1004 if (dev->features & NEW_XMII) {
1005 switch (data & PORT_MII_SEL_M) {
1006 case PORT_MII_SEL:
1007 mode = 0;
1008 break;
1009 case PORT_RMII_SEL:
1010 mode = 1;
1011 break;
1012 case PORT_GMII_SEL:
1013 mode = 2;
1014 break;
1015 default:
1016 mode = 3;
1017 }
1018 } else {
1019 switch (data & PORT_MII_SEL_M) {
1020 case PORT_MII_SEL_S1:
1021 mode = 0;
1022 break;
1023 case PORT_RMII_SEL_S1:
1024 mode = 1;
1025 break;
1026 case PORT_GMII_SEL_S1:
1027 mode = 2;
1028 break;
1029 default:
1030 mode = 3;
1031 }
1032 }
1033 return mode;
1034}
1035
1036static void ksz9477_set_xmii(struct ksz_device *dev, int mode, u8 *data)
1037{
1038 u8 xmii;
1039
1040 if (dev->features & NEW_XMII) {
1041 switch (mode) {
1042 case 0:
1043 xmii = PORT_MII_SEL;
1044 break;
1045 case 1:
1046 xmii = PORT_RMII_SEL;
1047 break;
1048 case 2:
1049 xmii = PORT_GMII_SEL;
1050 break;
1051 default:
1052 xmii = PORT_RGMII_SEL;
1053 break;
1054 }
1055 } else {
1056 switch (mode) {
1057 case 0:
1058 xmii = PORT_MII_SEL_S1;
1059 break;
1060 case 1:
1061 xmii = PORT_RMII_SEL_S1;
1062 break;
1063 case 2:
1064 xmii = PORT_GMII_SEL_S1;
1065 break;
1066 default:
1067 xmii = PORT_RGMII_SEL_S1;
1068 break;
1069 }
1070 }
1071 *data &= ~PORT_MII_SEL_M;
1072 *data |= xmii;
1073}
1074
1075static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
1076{
1077 phy_interface_t interface;
1078 bool gbit;
1079 int mode;
1080 u8 data8;
1081
1082 if (port < dev->phy_port_cnt)
1083 return PHY_INTERFACE_MODE_NA;
1084 ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
1085 gbit = ksz9477_get_gbit(dev, data8);
1086 mode = ksz9477_get_xmii(dev, data8);
1087 switch (mode) {
1088 case 2:
1089 interface = PHY_INTERFACE_MODE_GMII;
1090 if (gbit)
1091 break;
1092 fallthrough;
1093 case 0:
1094 interface = PHY_INTERFACE_MODE_MII;
1095 break;
1096 case 1:
1097 interface = PHY_INTERFACE_MODE_RMII;
1098 break;
1099 default:
1100 interface = PHY_INTERFACE_MODE_RGMII;
1101 if (data8 & PORT_RGMII_ID_EG_ENABLE)
1102 interface = PHY_INTERFACE_MODE_RGMII_TXID;
1103 if (data8 & PORT_RGMII_ID_IG_ENABLE) {
1104 interface = PHY_INTERFACE_MODE_RGMII_RXID;
1105 if (data8 & PORT_RGMII_ID_EG_ENABLE)
1106 interface = PHY_INTERFACE_MODE_RGMII_ID;
1107 }
1108 break;
1109 }
1110 return interface;
1111}
1112
1113static void ksz9477_port_mmd_write(struct ksz_device *dev, int port,
1114 u8 dev_addr, u16 reg_addr, u16 val)
1115{
1116 ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
1117 MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr));
1118 ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr);
1119 ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
1120 MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr));
1121 ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val);
1122}
1123
1124static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port)
1125{
1126 /* Apply PHY settings to address errata listed in
1127 * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565
1128 * Silicon Errata and Data Sheet Clarification documents:
1129 *
1130 * Register settings are needed to improve PHY receive performance
1131 */
1132 ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b);
1133 ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032);
1134 ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c);
1135 ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060);
1136 ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777);
1137 ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008);
1138 ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001);
1139
1140 /* Transmit waveform amplitude can be improved
1141 * (1000BASE-T, 100BASE-TX, 10BASE-Te)
1142 */
1143 ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0);
1144
1145 /* Energy Efficient Ethernet (EEE) feature select must
1146 * be manually disabled (except on KSZ8565 which is 100Mbit)
1147 */
1148 if (dev->features & GBIT_SUPPORT)
1149 ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000);
1150
1151 /* Register settings are required to meet data sheet
1152 * supply current specifications
1153 */
1154 ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff);
1155 ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff);
1156 ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff);
1157 ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff);
1158 ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff);
1159 ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff);
1160 ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff);
1161 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff);
1162 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff);
1163 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff);
1164 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff);
1165 ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff);
1166 ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee);
1167}
1168
1169static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
1170{
1171 u8 data8;
1172 u8 member;
1173 u16 data16;
1174 struct ksz_port *p = &dev->ports[port];
1175
1176 /* enable tag tail for host port */
1177 if (cpu_port)
1178 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
1179 true);
1180
1181 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
1182
1183 /* set back pressure */
1184 ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
1185
1186 /* enable broadcast storm limit */
1187 ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
1188
1189 /* disable DiffServ priority */
1190 ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
1191
1192 /* replace priority */
1193 ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
1194 false);
1195 ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
1196 MTI_PVID_REPLACE, false);
1197
1198 /* enable 802.1p priority */
1199 ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
1200
1201 if (port < dev->phy_port_cnt) {
1202 /* do not force flow control */
1203 ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
1204 PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
1205 false);
1206
1207 if (dev->phy_errata_9477)
1208 ksz9477_phy_errata_setup(dev, port);
1209 } else {
1210 /* force flow control */
1211 ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
1212 PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
1213 true);
1214
1215 /* configure MAC to 1G & RGMII mode */
1216 ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
1217 switch (p->interface) {
1218 case PHY_INTERFACE_MODE_MII:
1219 ksz9477_set_xmii(dev, 0, &data8);
1220 ksz9477_set_gbit(dev, false, &data8);
1221 p->phydev.speed = SPEED_100;
1222 break;
1223 case PHY_INTERFACE_MODE_RMII:
1224 ksz9477_set_xmii(dev, 1, &data8);
1225 ksz9477_set_gbit(dev, false, &data8);
1226 p->phydev.speed = SPEED_100;
1227 break;
1228 case PHY_INTERFACE_MODE_GMII:
1229 ksz9477_set_xmii(dev, 2, &data8);
1230 ksz9477_set_gbit(dev, true, &data8);
1231 p->phydev.speed = SPEED_1000;
1232 break;
1233 default:
1234 ksz9477_set_xmii(dev, 3, &data8);
1235 ksz9477_set_gbit(dev, true, &data8);
1236 data8 &= ~PORT_RGMII_ID_IG_ENABLE;
1237 data8 &= ~PORT_RGMII_ID_EG_ENABLE;
1238 if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
1239 p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
1240 data8 |= PORT_RGMII_ID_IG_ENABLE;
1241 if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
1242 p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
1243 data8 |= PORT_RGMII_ID_EG_ENABLE;
1244 /* On KSZ9893, disable RGMII in-band status support */
1245 if (dev->features & IS_9893)
1246 data8 &= ~PORT_MII_MAC_MODE;
1247 p->phydev.speed = SPEED_1000;
1248 break;
1249 }
1250 ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
1251 p->phydev.duplex = 1;
1252 }
1253 mutex_lock(&dev->dev_mutex);
1254 if (cpu_port)
1255 member = dev->port_mask;
1256 else
1257 member = dev->host_mask | p->vid_member;
1258 mutex_unlock(&dev->dev_mutex);
1259 ksz9477_cfg_port_member(dev, port, member);
1260
1261 /* clear pending interrupts */
1262 if (port < dev->phy_port_cnt)
1263 ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
1264}
1265
1266static void ksz9477_config_cpu_port(struct dsa_switch *ds)
1267{
1268 struct ksz_device *dev = ds->priv;
1269 struct ksz_port *p;
1270 int i;
1271
1272 for (i = 0; i < dev->port_cnt; i++) {
1273 if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
1274 phy_interface_t interface;
1275 const char *prev_msg;
1276 const char *prev_mode;
1277
1278 dev->cpu_port = i;
1279 dev->host_mask = (1 << dev->cpu_port);
1280 dev->port_mask |= dev->host_mask;
1281 p = &dev->ports[i];
1282
1283 /* Read from XMII register to determine host port
1284 * interface. If set specifically in device tree
1285 * note the difference to help debugging.
1286 */
1287 interface = ksz9477_get_interface(dev, i);
1288 if (!p->interface) {
1289 if (dev->compat_interface) {
1290 dev_warn(dev->dev,
1291 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
1292 "Please update your device tree.\n",
1293 i);
1294 p->interface = dev->compat_interface;
1295 } else {
1296 p->interface = interface;
1297 }
1298 }
1299 if (interface && interface != p->interface) {
1300 prev_msg = " instead of ";
1301 prev_mode = phy_modes(interface);
1302 } else {
1303 prev_msg = "";
1304 prev_mode = "";
1305 }
1306 dev_info(dev->dev,
1307 "Port%d: using phy mode %s%s%s\n",
1308 i,
1309 phy_modes(p->interface),
1310 prev_msg,
1311 prev_mode);
1312
1313 /* enable cpu port */
1314 ksz9477_port_setup(dev, i, true);
1315 p->vid_member = dev->port_mask;
1316 p->on = 1;
1317 }
1318 }
1319
1320 dev->member = dev->host_mask;
1321
1322 for (i = 0; i < dev->port_cnt; i++) {
1323 if (i == dev->cpu_port)
1324 continue;
1325 p = &dev->ports[i];
1326
1327 /* Initialize to non-zero so that ksz_cfg_port_member() will
1328 * be called.
1329 */
1330 p->vid_member = (1 << i);
1331 p->member = dev->port_mask;
1332 ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED);
1333 p->on = 1;
1334 if (i < dev->phy_port_cnt)
1335 p->phy = 1;
1336 if (dev->chip_id == 0x00947700 && i == 6) {
1337 p->sgmii = 1;
1338
1339 /* SGMII PHY detection code is not implemented yet. */
1340 p->phy = 0;
1341 }
1342 }
1343}
1344
1345static int ksz9477_setup(struct dsa_switch *ds)
1346{
1347 struct ksz_device *dev = ds->priv;
1348 int ret = 0;
1349
1350 dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
1351 dev->num_vlans, GFP_KERNEL);
1352 if (!dev->vlan_cache)
1353 return -ENOMEM;
1354
1355 ret = ksz9477_reset_switch(dev);
1356 if (ret) {
1357 dev_err(ds->dev, "failed to reset switch\n");
1358 return ret;
1359 }
1360
1361 /* Required for port partitioning. */
1362 ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
1363 true);
1364
1365 /* Do not work correctly with tail tagging. */
1366 ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false);
1367
1368 /* accept packet up to 2000bytes */
1369 ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
1370
1371 ksz9477_config_cpu_port(ds);
1372
1373 ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
1374
1375 /* queue based egress rate limit */
1376 ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
1377
1378 /* enable global MIB counter freeze function */
1379 ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
1380
1381 /* start switch */
1382 ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
1383
1384 ksz_init_mib_timer(dev);
1385
1386 ds->configure_vlan_while_not_filtering = false;
1387
1388 return 0;
1389}
1390
1391static const struct dsa_switch_ops ksz9477_switch_ops = {
1392 .get_tag_protocol = ksz9477_get_tag_protocol,
1393 .setup = ksz9477_setup,
1394 .phy_read = ksz9477_phy_read16,
1395 .phy_write = ksz9477_phy_write16,
1396 .phylink_mac_link_down = ksz_mac_link_down,
1397 .port_enable = ksz_enable_port,
1398 .get_strings = ksz9477_get_strings,
1399 .get_ethtool_stats = ksz_get_ethtool_stats,
1400 .get_sset_count = ksz_sset_count,
1401 .port_bridge_join = ksz_port_bridge_join,
1402 .port_bridge_leave = ksz_port_bridge_leave,
1403 .port_stp_state_set = ksz9477_port_stp_state_set,
1404 .port_fast_age = ksz_port_fast_age,
1405 .port_vlan_filtering = ksz9477_port_vlan_filtering,
1406 .port_vlan_add = ksz9477_port_vlan_add,
1407 .port_vlan_del = ksz9477_port_vlan_del,
1408 .port_fdb_dump = ksz9477_port_fdb_dump,
1409 .port_fdb_add = ksz9477_port_fdb_add,
1410 .port_fdb_del = ksz9477_port_fdb_del,
1411 .port_mdb_add = ksz9477_port_mdb_add,
1412 .port_mdb_del = ksz9477_port_mdb_del,
1413 .port_mirror_add = ksz9477_port_mirror_add,
1414 .port_mirror_del = ksz9477_port_mirror_del,
1415};
1416
1417static u32 ksz9477_get_port_addr(int port, int offset)
1418{
1419 return PORT_CTRL_ADDR(port, offset);
1420}
1421
1422static int ksz9477_switch_detect(struct ksz_device *dev)
1423{
1424 u8 data8;
1425 u8 id_hi;
1426 u8 id_lo;
1427 u32 id32;
1428 int ret;
1429
1430 /* turn off SPI DO Edge select */
1431 ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
1432 if (ret)
1433 return ret;
1434
1435 data8 &= ~SPI_AUTO_EDGE_DETECTION;
1436 ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
1437 if (ret)
1438 return ret;
1439
1440 /* read chip id */
1441 ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
1442 if (ret)
1443 return ret;
1444 ret = ksz_read8(dev, REG_GLOBAL_OPTIONS, &data8);
1445 if (ret)
1446 return ret;
1447
1448 /* Number of ports can be reduced depending on chip. */
1449 dev->phy_port_cnt = 5;
1450
1451 /* Default capability is gigabit capable. */
1452 dev->features = GBIT_SUPPORT;
1453
1454 dev_dbg(dev->dev, "Switch detect: ID=%08x%02x\n", id32, data8);
1455 id_hi = (u8)(id32 >> 16);
1456 id_lo = (u8)(id32 >> 8);
1457 if ((id_lo & 0xf) == 3) {
1458 /* Chip is from KSZ9893 design. */
1459 dev_info(dev->dev, "Found KSZ9893\n");
1460 dev->features |= IS_9893;
1461
1462 /* Chip does not support gigabit. */
1463 if (data8 & SW_QW_ABLE)
1464 dev->features &= ~GBIT_SUPPORT;
1465 dev->phy_port_cnt = 2;
1466 } else {
1467 dev_info(dev->dev, "Found KSZ9477 or compatible\n");
1468 /* Chip uses new XMII register definitions. */
1469 dev->features |= NEW_XMII;
1470
1471 /* Chip does not support gigabit. */
1472 if (!(data8 & SW_GIGABIT_ABLE))
1473 dev->features &= ~GBIT_SUPPORT;
1474 }
1475
1476 /* Change chip id to known ones so it can be matched against them. */
1477 id32 = (id_hi << 16) | (id_lo << 8);
1478
1479 dev->chip_id = id32;
1480
1481 return 0;
1482}
1483
1484struct ksz_chip_data {
1485 u32 chip_id;
1486 const char *dev_name;
1487 int num_vlans;
1488 int num_alus;
1489 int num_statics;
1490 int cpu_ports;
1491 int port_cnt;
1492 bool phy_errata_9477;
1493};
1494
1495static const struct ksz_chip_data ksz9477_switch_chips[] = {
1496 {
1497 .chip_id = 0x00947700,
1498 .dev_name = "KSZ9477",
1499 .num_vlans = 4096,
1500 .num_alus = 4096,
1501 .num_statics = 16,
1502 .cpu_ports = 0x7F, /* can be configured as cpu port */
1503 .port_cnt = 7, /* total physical port count */
1504 .phy_errata_9477 = true,
1505 },
1506 {
1507 .chip_id = 0x00989700,
1508 .dev_name = "KSZ9897",
1509 .num_vlans = 4096,
1510 .num_alus = 4096,
1511 .num_statics = 16,
1512 .cpu_ports = 0x7F, /* can be configured as cpu port */
1513 .port_cnt = 7, /* total physical port count */
1514 .phy_errata_9477 = true,
1515 },
1516 {
1517 .chip_id = 0x00989300,
1518 .dev_name = "KSZ9893",
1519 .num_vlans = 4096,
1520 .num_alus = 4096,
1521 .num_statics = 16,
1522 .cpu_ports = 0x07, /* can be configured as cpu port */
1523 .port_cnt = 3, /* total port count */
1524 },
1525 {
1526 .chip_id = 0x00956700,
1527 .dev_name = "KSZ9567",
1528 .num_vlans = 4096,
1529 .num_alus = 4096,
1530 .num_statics = 16,
1531 .cpu_ports = 0x7F, /* can be configured as cpu port */
1532 .port_cnt = 7, /* total physical port count */
1533 .phy_errata_9477 = true,
1534 },
1535};
1536
1537static int ksz9477_switch_init(struct ksz_device *dev)
1538{
1539 int i;
1540
1541 dev->ds->ops = &ksz9477_switch_ops;
1542
1543 for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
1544 const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
1545
1546 if (dev->chip_id == chip->chip_id) {
1547 dev->name = chip->dev_name;
1548 dev->num_vlans = chip->num_vlans;
1549 dev->num_alus = chip->num_alus;
1550 dev->num_statics = chip->num_statics;
1551 dev->port_cnt = chip->port_cnt;
1552 dev->cpu_ports = chip->cpu_ports;
1553 dev->phy_errata_9477 = chip->phy_errata_9477;
1554
1555 break;
1556 }
1557 }
1558
1559 /* no switch found */
1560 if (!dev->port_cnt)
1561 return -ENODEV;
1562
1563 dev->port_mask = (1 << dev->port_cnt) - 1;
1564
1565 dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
1566 dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
1567
1568 dev->ports = devm_kzalloc(dev->dev,
1569 dev->port_cnt * sizeof(struct ksz_port),
1570 GFP_KERNEL);
1571 if (!dev->ports)
1572 return -ENOMEM;
1573 for (i = 0; i < dev->port_cnt; i++) {
1574 mutex_init(&dev->ports[i].mib.cnt_mutex);
1575 dev->ports[i].mib.counters =
1576 devm_kzalloc(dev->dev,
1577 sizeof(u64) *
1578 (TOTAL_SWITCH_COUNTER_NUM + 1),
1579 GFP_KERNEL);
1580 if (!dev->ports[i].mib.counters)
1581 return -ENOMEM;
1582 }
1583
1584 /* set the real number of ports */
1585 dev->ds->num_ports = dev->port_cnt;
1586
1587 return 0;
1588}
1589
1590static void ksz9477_switch_exit(struct ksz_device *dev)
1591{
1592 ksz9477_reset_switch(dev);
1593}
1594
1595static const struct ksz_dev_ops ksz9477_dev_ops = {
1596 .get_port_addr = ksz9477_get_port_addr,
1597 .cfg_port_member = ksz9477_cfg_port_member,
1598 .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
1599 .port_setup = ksz9477_port_setup,
1600 .r_mib_cnt = ksz9477_r_mib_cnt,
1601 .r_mib_pkt = ksz9477_r_mib_pkt,
1602 .freeze_mib = ksz9477_freeze_mib,
1603 .port_init_cnt = ksz9477_port_init_cnt,
1604 .shutdown = ksz9477_reset_switch,
1605 .detect = ksz9477_switch_detect,
1606 .init = ksz9477_switch_init,
1607 .exit = ksz9477_switch_exit,
1608};
1609
1610int ksz9477_switch_register(struct ksz_device *dev)
1611{
1612 int ret, i;
1613 struct phy_device *phydev;
1614
1615 ret = ksz_switch_register(dev, &ksz9477_dev_ops);
1616 if (ret)
1617 return ret;
1618
1619 for (i = 0; i < dev->phy_port_cnt; ++i) {
1620 if (!dsa_is_user_port(dev->ds, i))
1621 continue;
1622
1623 phydev = dsa_to_port(dev->ds, i)->slave->phydev;
1624
1625 /* The MAC actually cannot run in 1000 half-duplex mode. */
1626 phy_remove_link_mode(phydev,
1627 ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
1628
1629 /* PHY does not support gigabit. */
1630 if (!(dev->features & GBIT_SUPPORT))
1631 phy_remove_link_mode(phydev,
1632 ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
1633 }
1634 return ret;
1635}
1636EXPORT_SYMBOL(ksz9477_switch_register);
1637
1638MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
1639MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
1640MODULE_LICENSE("GPL");