Loading...
1/*
2 * it87.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring.
4 *
5 * The IT8705F is an LPC-based Super I/O part that contains UARTs, a
6 * parallel port, an IR port, a MIDI port, a floppy controller, etc., in
7 * addition to an Environment Controller (Enhanced Hardware Monitor and
8 * Fan Controller)
9 *
10 * This driver supports only the Environment Controller in the IT8705F and
11 * similar parts. The other devices are supported by different drivers.
12 *
13 * Supports: IT8705F Super I/O chip w/LPC interface
14 * IT8712F Super I/O chip w/LPC interface
15 * IT8716F Super I/O chip w/LPC interface
16 * IT8718F Super I/O chip w/LPC interface
17 * IT8720F Super I/O chip w/LPC interface
18 * IT8721F Super I/O chip w/LPC interface
19 * IT8726F Super I/O chip w/LPC interface
20 * IT8758E Super I/O chip w/LPC interface
21 * Sis950 A clone of the IT8705F
22 *
23 * Copyright (C) 2001 Chris Gauthron
24 * Copyright (C) 2005-2010 Jean Delvare <khali@linux-fr.org>
25 *
26 * This program is free software; you can redistribute it and/or modify
27 * it under the terms of the GNU General Public License as published by
28 * the Free Software Foundation; either version 2 of the License, or
29 * (at your option) any later version.
30 *
31 * This program is distributed in the hope that it will be useful,
32 * but WITHOUT ANY WARRANTY; without even the implied warranty of
33 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
34 * GNU General Public License for more details.
35 *
36 * You should have received a copy of the GNU General Public License
37 * along with this program; if not, write to the Free Software
38 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
39 */
40
41#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
42
43#include <linux/module.h>
44#include <linux/init.h>
45#include <linux/slab.h>
46#include <linux/jiffies.h>
47#include <linux/platform_device.h>
48#include <linux/hwmon.h>
49#include <linux/hwmon-sysfs.h>
50#include <linux/hwmon-vid.h>
51#include <linux/err.h>
52#include <linux/mutex.h>
53#include <linux/sysfs.h>
54#include <linux/string.h>
55#include <linux/dmi.h>
56#include <linux/acpi.h>
57#include <linux/io.h>
58
59#define DRVNAME "it87"
60
61enum chips { it87, it8712, it8716, it8718, it8720, it8721 };
62
63static unsigned short force_id;
64module_param(force_id, ushort, 0);
65MODULE_PARM_DESC(force_id, "Override the detected device ID");
66
67static struct platform_device *pdev;
68
69#define REG 0x2e /* The register to read/write */
70#define DEV 0x07 /* Register: Logical device select */
71#define VAL 0x2f /* The value to read/write */
72#define PME 0x04 /* The device with the fan registers in it */
73
74/* The device with the IT8718F/IT8720F VID value in it */
75#define GPIO 0x07
76
77#define DEVID 0x20 /* Register: Device ID */
78#define DEVREV 0x22 /* Register: Device Revision */
79
80static inline int superio_inb(int reg)
81{
82 outb(reg, REG);
83 return inb(VAL);
84}
85
86static inline void superio_outb(int reg, int val)
87{
88 outb(reg, REG);
89 outb(val, VAL);
90}
91
92static int superio_inw(int reg)
93{
94 int val;
95 outb(reg++, REG);
96 val = inb(VAL) << 8;
97 outb(reg, REG);
98 val |= inb(VAL);
99 return val;
100}
101
102static inline void superio_select(int ldn)
103{
104 outb(DEV, REG);
105 outb(ldn, VAL);
106}
107
108static inline int superio_enter(void)
109{
110 /*
111 * Try to reserve REG and REG + 1 for exclusive access.
112 */
113 if (!request_muxed_region(REG, 2, DRVNAME))
114 return -EBUSY;
115
116 outb(0x87, REG);
117 outb(0x01, REG);
118 outb(0x55, REG);
119 outb(0x55, REG);
120 return 0;
121}
122
123static inline void superio_exit(void)
124{
125 outb(0x02, REG);
126 outb(0x02, VAL);
127 release_region(REG, 2);
128}
129
130/* Logical device 4 registers */
131#define IT8712F_DEVID 0x8712
132#define IT8705F_DEVID 0x8705
133#define IT8716F_DEVID 0x8716
134#define IT8718F_DEVID 0x8718
135#define IT8720F_DEVID 0x8720
136#define IT8721F_DEVID 0x8721
137#define IT8726F_DEVID 0x8726
138#define IT87_ACT_REG 0x30
139#define IT87_BASE_REG 0x60
140
141/* Logical device 7 registers (IT8712F and later) */
142#define IT87_SIO_GPIO3_REG 0x27
143#define IT87_SIO_GPIO5_REG 0x29
144#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
145#define IT87_SIO_VID_REG 0xfc /* VID value */
146#define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
147
148/* Update battery voltage after every reading if true */
149static int update_vbat;
150
151/* Not all BIOSes properly configure the PWM registers */
152static int fix_pwm_polarity;
153
154/* Many IT87 constants specified below */
155
156/* Length of ISA address segment */
157#define IT87_EXTENT 8
158
159/* Length of ISA address segment for Environmental Controller */
160#define IT87_EC_EXTENT 2
161
162/* Offset of EC registers from ISA base address */
163#define IT87_EC_OFFSET 5
164
165/* Where are the ISA address/data registers relative to the EC base address */
166#define IT87_ADDR_REG_OFFSET 0
167#define IT87_DATA_REG_OFFSET 1
168
169/*----- The IT87 registers -----*/
170
171#define IT87_REG_CONFIG 0x00
172
173#define IT87_REG_ALARM1 0x01
174#define IT87_REG_ALARM2 0x02
175#define IT87_REG_ALARM3 0x03
176
177/* The IT8718F and IT8720F have the VID value in a different register, in
178 Super-I/O configuration space. */
179#define IT87_REG_VID 0x0a
180/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
181 for fan divisors. Later IT8712F revisions must use 16-bit tachometer
182 mode. */
183#define IT87_REG_FAN_DIV 0x0b
184#define IT87_REG_FAN_16BIT 0x0c
185
186/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
187
188static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
189static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86 };
190static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83 };
191static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
192#define IT87_REG_FAN_MAIN_CTRL 0x13
193#define IT87_REG_FAN_CTL 0x14
194#define IT87_REG_PWM(nr) (0x15 + (nr))
195#define IT87_REG_PWM_DUTY(nr) (0x63 + (nr) * 8)
196
197#define IT87_REG_VIN(nr) (0x20 + (nr))
198#define IT87_REG_TEMP(nr) (0x29 + (nr))
199
200#define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2)
201#define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2)
202#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
203#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2)
204
205#define IT87_REG_VIN_ENABLE 0x50
206#define IT87_REG_TEMP_ENABLE 0x51
207#define IT87_REG_BEEP_ENABLE 0x5c
208
209#define IT87_REG_CHIPID 0x58
210
211#define IT87_REG_AUTO_TEMP(nr, i) (0x60 + (nr) * 8 + (i))
212#define IT87_REG_AUTO_PWM(nr, i) (0x65 + (nr) * 8 + (i))
213
214
215struct it87_sio_data {
216 enum chips type;
217 /* Values read from Super-I/O config space */
218 u8 revision;
219 u8 vid_value;
220 u8 beep_pin;
221 u8 internal; /* Internal sensors can be labeled */
222 /* Features skipped based on config or DMI */
223 u8 skip_vid;
224 u8 skip_fan;
225 u8 skip_pwm;
226};
227
228/* For each registered chip, we need to keep some data in memory.
229 The structure is dynamically allocated. */
230struct it87_data {
231 struct device *hwmon_dev;
232 enum chips type;
233 u8 revision;
234
235 unsigned short addr;
236 const char *name;
237 struct mutex update_lock;
238 char valid; /* !=0 if following fields are valid */
239 unsigned long last_updated; /* In jiffies */
240
241 u16 in_scaled; /* Internal voltage sensors are scaled */
242 u8 in[9]; /* Register value */
243 u8 in_max[8]; /* Register value */
244 u8 in_min[8]; /* Register value */
245 u8 has_fan; /* Bitfield, fans enabled */
246 u16 fan[5]; /* Register values, possibly combined */
247 u16 fan_min[5]; /* Register values, possibly combined */
248 s8 temp[3]; /* Register value */
249 s8 temp_high[3]; /* Register value */
250 s8 temp_low[3]; /* Register value */
251 u8 sensor; /* Register value */
252 u8 fan_div[3]; /* Register encoding, shifted right */
253 u8 vid; /* Register encoding, combined */
254 u8 vrm;
255 u32 alarms; /* Register encoding, combined */
256 u8 beeps; /* Register encoding */
257 u8 fan_main_ctrl; /* Register value */
258 u8 fan_ctl; /* Register value */
259
260 /* The following 3 arrays correspond to the same registers up to
261 * the IT8720F. The meaning of bits 6-0 depends on the value of bit
262 * 7, and we want to preserve settings on mode changes, so we have
263 * to track all values separately.
264 * Starting with the IT8721F, the manual PWM duty cycles are stored
265 * in separate registers (8-bit values), so the separate tracking
266 * is no longer needed, but it is still done to keep the driver
267 * simple. */
268 u8 pwm_ctrl[3]; /* Register value */
269 u8 pwm_duty[3]; /* Manual PWM value set by user */
270 u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */
271
272 /* Automatic fan speed control registers */
273 u8 auto_pwm[3][4]; /* [nr][3] is hard-coded */
274 s8 auto_temp[3][5]; /* [nr][0] is point1_temp_hyst */
275};
276
277static u8 in_to_reg(const struct it87_data *data, int nr, long val)
278{
279 long lsb;
280
281 if (data->type == it8721) {
282 if (data->in_scaled & (1 << nr))
283 lsb = 24;
284 else
285 lsb = 12;
286 } else
287 lsb = 16;
288
289 val = DIV_ROUND_CLOSEST(val, lsb);
290 return SENSORS_LIMIT(val, 0, 255);
291}
292
293static int in_from_reg(const struct it87_data *data, int nr, int val)
294{
295 if (data->type == it8721) {
296 if (data->in_scaled & (1 << nr))
297 return val * 24;
298 else
299 return val * 12;
300 } else
301 return val * 16;
302}
303
304static inline u8 FAN_TO_REG(long rpm, int div)
305{
306 if (rpm == 0)
307 return 255;
308 rpm = SENSORS_LIMIT(rpm, 1, 1000000);
309 return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
310 254);
311}
312
313static inline u16 FAN16_TO_REG(long rpm)
314{
315 if (rpm == 0)
316 return 0xffff;
317 return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
318}
319
320#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 255 ? 0 : \
321 1350000 / ((val) * (div)))
322/* The divider is fixed to 2 in 16-bit mode */
323#define FAN16_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
324 1350000 / ((val) * 2))
325
326#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (((val) - 500) / 1000) : \
327 ((val) + 500) / 1000), -128, 127))
328#define TEMP_FROM_REG(val) ((val) * 1000)
329
330static u8 pwm_to_reg(const struct it87_data *data, long val)
331{
332 if (data->type == it8721)
333 return val;
334 else
335 return val >> 1;
336}
337
338static int pwm_from_reg(const struct it87_data *data, u8 reg)
339{
340 if (data->type == it8721)
341 return reg;
342 else
343 return (reg & 0x7f) << 1;
344}
345
346
347static int DIV_TO_REG(int val)
348{
349 int answer = 0;
350 while (answer < 7 && (val >>= 1))
351 answer++;
352 return answer;
353}
354#define DIV_FROM_REG(val) (1 << (val))
355
356static const unsigned int pwm_freq[8] = {
357 48000000 / 128,
358 24000000 / 128,
359 12000000 / 128,
360 8000000 / 128,
361 6000000 / 128,
362 3000000 / 128,
363 1500000 / 128,
364 750000 / 128,
365};
366
367static inline int has_16bit_fans(const struct it87_data *data)
368{
369 /* IT8705F Datasheet 0.4.1, 3h == Version G.
370 IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
371 These are the first revisions with 16bit tachometer support. */
372 return (data->type == it87 && data->revision >= 0x03)
373 || (data->type == it8712 && data->revision >= 0x08)
374 || data->type == it8716
375 || data->type == it8718
376 || data->type == it8720
377 || data->type == it8721;
378}
379
380static inline int has_old_autopwm(const struct it87_data *data)
381{
382 /* The old automatic fan speed control interface is implemented
383 by IT8705F chips up to revision F and IT8712F chips up to
384 revision G. */
385 return (data->type == it87 && data->revision < 0x03)
386 || (data->type == it8712 && data->revision < 0x08);
387}
388
389static int it87_probe(struct platform_device *pdev);
390static int __devexit it87_remove(struct platform_device *pdev);
391
392static int it87_read_value(struct it87_data *data, u8 reg);
393static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
394static struct it87_data *it87_update_device(struct device *dev);
395static int it87_check_pwm(struct device *dev);
396static void it87_init_device(struct platform_device *pdev);
397
398
399static struct platform_driver it87_driver = {
400 .driver = {
401 .owner = THIS_MODULE,
402 .name = DRVNAME,
403 },
404 .probe = it87_probe,
405 .remove = __devexit_p(it87_remove),
406};
407
408static ssize_t show_in(struct device *dev, struct device_attribute *attr,
409 char *buf)
410{
411 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
412 int nr = sensor_attr->index;
413
414 struct it87_data *data = it87_update_device(dev);
415 return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr]));
416}
417
418static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
419 char *buf)
420{
421 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
422 int nr = sensor_attr->index;
423
424 struct it87_data *data = it87_update_device(dev);
425 return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_min[nr]));
426}
427
428static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
429 char *buf)
430{
431 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
432 int nr = sensor_attr->index;
433
434 struct it87_data *data = it87_update_device(dev);
435 return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_max[nr]));
436}
437
438static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
439 const char *buf, size_t count)
440{
441 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
442 int nr = sensor_attr->index;
443
444 struct it87_data *data = dev_get_drvdata(dev);
445 unsigned long val;
446
447 if (strict_strtoul(buf, 10, &val) < 0)
448 return -EINVAL;
449
450 mutex_lock(&data->update_lock);
451 data->in_min[nr] = in_to_reg(data, nr, val);
452 it87_write_value(data, IT87_REG_VIN_MIN(nr),
453 data->in_min[nr]);
454 mutex_unlock(&data->update_lock);
455 return count;
456}
457static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
458 const char *buf, size_t count)
459{
460 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
461 int nr = sensor_attr->index;
462
463 struct it87_data *data = dev_get_drvdata(dev);
464 unsigned long val;
465
466 if (strict_strtoul(buf, 10, &val) < 0)
467 return -EINVAL;
468
469 mutex_lock(&data->update_lock);
470 data->in_max[nr] = in_to_reg(data, nr, val);
471 it87_write_value(data, IT87_REG_VIN_MAX(nr),
472 data->in_max[nr]);
473 mutex_unlock(&data->update_lock);
474 return count;
475}
476
477#define show_in_offset(offset) \
478static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
479 show_in, NULL, offset);
480
481#define limit_in_offset(offset) \
482static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
483 show_in_min, set_in_min, offset); \
484static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
485 show_in_max, set_in_max, offset);
486
487show_in_offset(0);
488limit_in_offset(0);
489show_in_offset(1);
490limit_in_offset(1);
491show_in_offset(2);
492limit_in_offset(2);
493show_in_offset(3);
494limit_in_offset(3);
495show_in_offset(4);
496limit_in_offset(4);
497show_in_offset(5);
498limit_in_offset(5);
499show_in_offset(6);
500limit_in_offset(6);
501show_in_offset(7);
502limit_in_offset(7);
503show_in_offset(8);
504
505/* 3 temperatures */
506static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
507 char *buf)
508{
509 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
510 int nr = sensor_attr->index;
511
512 struct it87_data *data = it87_update_device(dev);
513 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
514}
515static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
516 char *buf)
517{
518 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
519 int nr = sensor_attr->index;
520
521 struct it87_data *data = it87_update_device(dev);
522 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
523}
524static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
525 char *buf)
526{
527 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
528 int nr = sensor_attr->index;
529
530 struct it87_data *data = it87_update_device(dev);
531 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr]));
532}
533static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
534 const char *buf, size_t count)
535{
536 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
537 int nr = sensor_attr->index;
538
539 struct it87_data *data = dev_get_drvdata(dev);
540 long val;
541
542 if (strict_strtol(buf, 10, &val) < 0)
543 return -EINVAL;
544
545 mutex_lock(&data->update_lock);
546 data->temp_high[nr] = TEMP_TO_REG(val);
547 it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
548 mutex_unlock(&data->update_lock);
549 return count;
550}
551static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
552 const char *buf, size_t count)
553{
554 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
555 int nr = sensor_attr->index;
556
557 struct it87_data *data = dev_get_drvdata(dev);
558 long val;
559
560 if (strict_strtol(buf, 10, &val) < 0)
561 return -EINVAL;
562
563 mutex_lock(&data->update_lock);
564 data->temp_low[nr] = TEMP_TO_REG(val);
565 it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
566 mutex_unlock(&data->update_lock);
567 return count;
568}
569#define show_temp_offset(offset) \
570static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
571 show_temp, NULL, offset - 1); \
572static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
573 show_temp_max, set_temp_max, offset - 1); \
574static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
575 show_temp_min, set_temp_min, offset - 1);
576
577show_temp_offset(1);
578show_temp_offset(2);
579show_temp_offset(3);
580
581static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
582 char *buf)
583{
584 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
585 int nr = sensor_attr->index;
586
587 struct it87_data *data = it87_update_device(dev);
588 u8 reg = data->sensor; /* In case the value is updated while
589 we use it */
590
591 if (reg & (1 << nr))
592 return sprintf(buf, "3\n"); /* thermal diode */
593 if (reg & (8 << nr))
594 return sprintf(buf, "4\n"); /* thermistor */
595 return sprintf(buf, "0\n"); /* disabled */
596}
597static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
598 const char *buf, size_t count)
599{
600 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
601 int nr = sensor_attr->index;
602
603 struct it87_data *data = dev_get_drvdata(dev);
604 long val;
605 u8 reg;
606
607 if (strict_strtol(buf, 10, &val) < 0)
608 return -EINVAL;
609
610 reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
611 reg &= ~(1 << nr);
612 reg &= ~(8 << nr);
613 if (val == 2) { /* backwards compatibility */
614 dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
615 "instead\n");
616 val = 4;
617 }
618 /* 3 = thermal diode; 4 = thermistor; 0 = disabled */
619 if (val == 3)
620 reg |= 1 << nr;
621 else if (val == 4)
622 reg |= 8 << nr;
623 else if (val != 0)
624 return -EINVAL;
625
626 mutex_lock(&data->update_lock);
627 data->sensor = reg;
628 it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
629 data->valid = 0; /* Force cache refresh */
630 mutex_unlock(&data->update_lock);
631 return count;
632}
633#define show_sensor_offset(offset) \
634static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
635 show_sensor, set_sensor, offset - 1);
636
637show_sensor_offset(1);
638show_sensor_offset(2);
639show_sensor_offset(3);
640
641/* 3 Fans */
642
643static int pwm_mode(const struct it87_data *data, int nr)
644{
645 int ctrl = data->fan_main_ctrl & (1 << nr);
646
647 if (ctrl == 0) /* Full speed */
648 return 0;
649 if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
650 return 2;
651 else /* Manual mode */
652 return 1;
653}
654
655static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
656 char *buf)
657{
658 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
659 int nr = sensor_attr->index;
660
661 struct it87_data *data = it87_update_device(dev);
662 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
663 DIV_FROM_REG(data->fan_div[nr])));
664}
665static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
666 char *buf)
667{
668 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
669 int nr = sensor_attr->index;
670
671 struct it87_data *data = it87_update_device(dev);
672 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
673 DIV_FROM_REG(data->fan_div[nr])));
674}
675static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
676 char *buf)
677{
678 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
679 int nr = sensor_attr->index;
680
681 struct it87_data *data = it87_update_device(dev);
682 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
683}
684static ssize_t show_pwm_enable(struct device *dev,
685 struct device_attribute *attr, char *buf)
686{
687 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
688 int nr = sensor_attr->index;
689
690 struct it87_data *data = it87_update_device(dev);
691 return sprintf(buf, "%d\n", pwm_mode(data, nr));
692}
693static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
694 char *buf)
695{
696 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
697 int nr = sensor_attr->index;
698
699 struct it87_data *data = it87_update_device(dev);
700 return sprintf(buf, "%d\n",
701 pwm_from_reg(data, data->pwm_duty[nr]));
702}
703static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
704 char *buf)
705{
706 struct it87_data *data = it87_update_device(dev);
707 int index = (data->fan_ctl >> 4) & 0x07;
708
709 return sprintf(buf, "%u\n", pwm_freq[index]);
710}
711static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
712 const char *buf, size_t count)
713{
714 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
715 int nr = sensor_attr->index;
716
717 struct it87_data *data = dev_get_drvdata(dev);
718 long val;
719 u8 reg;
720
721 if (strict_strtol(buf, 10, &val) < 0)
722 return -EINVAL;
723
724 mutex_lock(&data->update_lock);
725 reg = it87_read_value(data, IT87_REG_FAN_DIV);
726 switch (nr) {
727 case 0:
728 data->fan_div[nr] = reg & 0x07;
729 break;
730 case 1:
731 data->fan_div[nr] = (reg >> 3) & 0x07;
732 break;
733 case 2:
734 data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
735 break;
736 }
737
738 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
739 it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
740 mutex_unlock(&data->update_lock);
741 return count;
742}
743static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
744 const char *buf, size_t count)
745{
746 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
747 int nr = sensor_attr->index;
748
749 struct it87_data *data = dev_get_drvdata(dev);
750 unsigned long val;
751 int min;
752 u8 old;
753
754 if (strict_strtoul(buf, 10, &val) < 0)
755 return -EINVAL;
756
757 mutex_lock(&data->update_lock);
758 old = it87_read_value(data, IT87_REG_FAN_DIV);
759
760 /* Save fan min limit */
761 min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
762
763 switch (nr) {
764 case 0:
765 case 1:
766 data->fan_div[nr] = DIV_TO_REG(val);
767 break;
768 case 2:
769 if (val < 8)
770 data->fan_div[nr] = 1;
771 else
772 data->fan_div[nr] = 3;
773 }
774 val = old & 0x80;
775 val |= (data->fan_div[0] & 0x07);
776 val |= (data->fan_div[1] & 0x07) << 3;
777 if (data->fan_div[2] == 3)
778 val |= 0x1 << 6;
779 it87_write_value(data, IT87_REG_FAN_DIV, val);
780
781 /* Restore fan min limit */
782 data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
783 it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
784
785 mutex_unlock(&data->update_lock);
786 return count;
787}
788
789/* Returns 0 if OK, -EINVAL otherwise */
790static int check_trip_points(struct device *dev, int nr)
791{
792 const struct it87_data *data = dev_get_drvdata(dev);
793 int i, err = 0;
794
795 if (has_old_autopwm(data)) {
796 for (i = 0; i < 3; i++) {
797 if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
798 err = -EINVAL;
799 }
800 for (i = 0; i < 2; i++) {
801 if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
802 err = -EINVAL;
803 }
804 }
805
806 if (err) {
807 dev_err(dev, "Inconsistent trip points, not switching to "
808 "automatic mode\n");
809 dev_err(dev, "Adjust the trip points and try again\n");
810 }
811 return err;
812}
813
814static ssize_t set_pwm_enable(struct device *dev,
815 struct device_attribute *attr, const char *buf, size_t count)
816{
817 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
818 int nr = sensor_attr->index;
819
820 struct it87_data *data = dev_get_drvdata(dev);
821 long val;
822
823 if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 2)
824 return -EINVAL;
825
826 /* Check trip points before switching to automatic mode */
827 if (val == 2) {
828 if (check_trip_points(dev, nr) < 0)
829 return -EINVAL;
830 }
831
832 mutex_lock(&data->update_lock);
833
834 if (val == 0) {
835 int tmp;
836 /* make sure the fan is on when in on/off mode */
837 tmp = it87_read_value(data, IT87_REG_FAN_CTL);
838 it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr));
839 /* set on/off mode */
840 data->fan_main_ctrl &= ~(1 << nr);
841 it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
842 data->fan_main_ctrl);
843 } else {
844 if (val == 1) /* Manual mode */
845 data->pwm_ctrl[nr] = data->type == it8721 ?
846 data->pwm_temp_map[nr] :
847 data->pwm_duty[nr];
848 else /* Automatic mode */
849 data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
850 it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
851 /* set SmartGuardian mode */
852 data->fan_main_ctrl |= (1 << nr);
853 it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
854 data->fan_main_ctrl);
855 }
856
857 mutex_unlock(&data->update_lock);
858 return count;
859}
860static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
861 const char *buf, size_t count)
862{
863 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
864 int nr = sensor_attr->index;
865
866 struct it87_data *data = dev_get_drvdata(dev);
867 long val;
868
869 if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 255)
870 return -EINVAL;
871
872 mutex_lock(&data->update_lock);
873 if (data->type == it8721) {
874 /* If we are in automatic mode, the PWM duty cycle register
875 * is read-only so we can't write the value */
876 if (data->pwm_ctrl[nr] & 0x80) {
877 mutex_unlock(&data->update_lock);
878 return -EBUSY;
879 }
880 data->pwm_duty[nr] = pwm_to_reg(data, val);
881 it87_write_value(data, IT87_REG_PWM_DUTY(nr),
882 data->pwm_duty[nr]);
883 } else {
884 data->pwm_duty[nr] = pwm_to_reg(data, val);
885 /* If we are in manual mode, write the duty cycle immediately;
886 * otherwise, just store it for later use. */
887 if (!(data->pwm_ctrl[nr] & 0x80)) {
888 data->pwm_ctrl[nr] = data->pwm_duty[nr];
889 it87_write_value(data, IT87_REG_PWM(nr),
890 data->pwm_ctrl[nr]);
891 }
892 }
893 mutex_unlock(&data->update_lock);
894 return count;
895}
896static ssize_t set_pwm_freq(struct device *dev,
897 struct device_attribute *attr, const char *buf, size_t count)
898{
899 struct it87_data *data = dev_get_drvdata(dev);
900 unsigned long val;
901 int i;
902
903 if (strict_strtoul(buf, 10, &val) < 0)
904 return -EINVAL;
905
906 /* Search for the nearest available frequency */
907 for (i = 0; i < 7; i++) {
908 if (val > (pwm_freq[i] + pwm_freq[i+1]) / 2)
909 break;
910 }
911
912 mutex_lock(&data->update_lock);
913 data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
914 data->fan_ctl |= i << 4;
915 it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
916 mutex_unlock(&data->update_lock);
917
918 return count;
919}
920static ssize_t show_pwm_temp_map(struct device *dev,
921 struct device_attribute *attr, char *buf)
922{
923 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
924 int nr = sensor_attr->index;
925
926 struct it87_data *data = it87_update_device(dev);
927 int map;
928
929 if (data->pwm_temp_map[nr] < 3)
930 map = 1 << data->pwm_temp_map[nr];
931 else
932 map = 0; /* Should never happen */
933 return sprintf(buf, "%d\n", map);
934}
935static ssize_t set_pwm_temp_map(struct device *dev,
936 struct device_attribute *attr, const char *buf, size_t count)
937{
938 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
939 int nr = sensor_attr->index;
940
941 struct it87_data *data = dev_get_drvdata(dev);
942 long val;
943 u8 reg;
944
945 /* This check can go away if we ever support automatic fan speed
946 control on newer chips. */
947 if (!has_old_autopwm(data)) {
948 dev_notice(dev, "Mapping change disabled for safety reasons\n");
949 return -EINVAL;
950 }
951
952 if (strict_strtol(buf, 10, &val) < 0)
953 return -EINVAL;
954
955 switch (val) {
956 case (1 << 0):
957 reg = 0x00;
958 break;
959 case (1 << 1):
960 reg = 0x01;
961 break;
962 case (1 << 2):
963 reg = 0x02;
964 break;
965 default:
966 return -EINVAL;
967 }
968
969 mutex_lock(&data->update_lock);
970 data->pwm_temp_map[nr] = reg;
971 /* If we are in automatic mode, write the temp mapping immediately;
972 * otherwise, just store it for later use. */
973 if (data->pwm_ctrl[nr] & 0x80) {
974 data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
975 it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
976 }
977 mutex_unlock(&data->update_lock);
978 return count;
979}
980
981static ssize_t show_auto_pwm(struct device *dev,
982 struct device_attribute *attr, char *buf)
983{
984 struct it87_data *data = it87_update_device(dev);
985 struct sensor_device_attribute_2 *sensor_attr =
986 to_sensor_dev_attr_2(attr);
987 int nr = sensor_attr->nr;
988 int point = sensor_attr->index;
989
990 return sprintf(buf, "%d\n",
991 pwm_from_reg(data, data->auto_pwm[nr][point]));
992}
993
994static ssize_t set_auto_pwm(struct device *dev,
995 struct device_attribute *attr, const char *buf, size_t count)
996{
997 struct it87_data *data = dev_get_drvdata(dev);
998 struct sensor_device_attribute_2 *sensor_attr =
999 to_sensor_dev_attr_2(attr);
1000 int nr = sensor_attr->nr;
1001 int point = sensor_attr->index;
1002 long val;
1003
1004 if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 255)
1005 return -EINVAL;
1006
1007 mutex_lock(&data->update_lock);
1008 data->auto_pwm[nr][point] = pwm_to_reg(data, val);
1009 it87_write_value(data, IT87_REG_AUTO_PWM(nr, point),
1010 data->auto_pwm[nr][point]);
1011 mutex_unlock(&data->update_lock);
1012 return count;
1013}
1014
1015static ssize_t show_auto_temp(struct device *dev,
1016 struct device_attribute *attr, char *buf)
1017{
1018 struct it87_data *data = it87_update_device(dev);
1019 struct sensor_device_attribute_2 *sensor_attr =
1020 to_sensor_dev_attr_2(attr);
1021 int nr = sensor_attr->nr;
1022 int point = sensor_attr->index;
1023
1024 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->auto_temp[nr][point]));
1025}
1026
1027static ssize_t set_auto_temp(struct device *dev,
1028 struct device_attribute *attr, const char *buf, size_t count)
1029{
1030 struct it87_data *data = dev_get_drvdata(dev);
1031 struct sensor_device_attribute_2 *sensor_attr =
1032 to_sensor_dev_attr_2(attr);
1033 int nr = sensor_attr->nr;
1034 int point = sensor_attr->index;
1035 long val;
1036
1037 if (strict_strtol(buf, 10, &val) < 0 || val < -128000 || val > 127000)
1038 return -EINVAL;
1039
1040 mutex_lock(&data->update_lock);
1041 data->auto_temp[nr][point] = TEMP_TO_REG(val);
1042 it87_write_value(data, IT87_REG_AUTO_TEMP(nr, point),
1043 data->auto_temp[nr][point]);
1044 mutex_unlock(&data->update_lock);
1045 return count;
1046}
1047
1048#define show_fan_offset(offset) \
1049static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
1050 show_fan, NULL, offset - 1); \
1051static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
1052 show_fan_min, set_fan_min, offset - 1); \
1053static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
1054 show_fan_div, set_fan_div, offset - 1);
1055
1056show_fan_offset(1);
1057show_fan_offset(2);
1058show_fan_offset(3);
1059
1060#define show_pwm_offset(offset) \
1061static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
1062 show_pwm_enable, set_pwm_enable, offset - 1); \
1063static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
1064 show_pwm, set_pwm, offset - 1); \
1065static DEVICE_ATTR(pwm##offset##_freq, \
1066 (offset == 1 ? S_IRUGO | S_IWUSR : S_IRUGO), \
1067 show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL)); \
1068static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels_temp, \
1069 S_IRUGO | S_IWUSR, show_pwm_temp_map, set_pwm_temp_map, \
1070 offset - 1); \
1071static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_pwm, \
1072 S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
1073 offset - 1, 0); \
1074static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_pwm, \
1075 S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
1076 offset - 1, 1); \
1077static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_pwm, \
1078 S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
1079 offset - 1, 2); \
1080static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_pwm, \
1081 S_IRUGO, show_auto_pwm, NULL, offset - 1, 3); \
1082static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp, \
1083 S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
1084 offset - 1, 1); \
1085static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp_hyst, \
1086 S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
1087 offset - 1, 0); \
1088static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_temp, \
1089 S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
1090 offset - 1, 2); \
1091static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_temp, \
1092 S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
1093 offset - 1, 3); \
1094static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_temp, \
1095 S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
1096 offset - 1, 4);
1097
1098show_pwm_offset(1);
1099show_pwm_offset(2);
1100show_pwm_offset(3);
1101
1102/* A different set of callbacks for 16-bit fans */
1103static ssize_t show_fan16(struct device *dev, struct device_attribute *attr,
1104 char *buf)
1105{
1106 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1107 int nr = sensor_attr->index;
1108 struct it87_data *data = it87_update_device(dev);
1109 return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr]));
1110}
1111
1112static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr,
1113 char *buf)
1114{
1115 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1116 int nr = sensor_attr->index;
1117 struct it87_data *data = it87_update_device(dev);
1118 return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr]));
1119}
1120
1121static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
1122 const char *buf, size_t count)
1123{
1124 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1125 int nr = sensor_attr->index;
1126 struct it87_data *data = dev_get_drvdata(dev);
1127 long val;
1128
1129 if (strict_strtol(buf, 10, &val) < 0)
1130 return -EINVAL;
1131
1132 mutex_lock(&data->update_lock);
1133 data->fan_min[nr] = FAN16_TO_REG(val);
1134 it87_write_value(data, IT87_REG_FAN_MIN[nr],
1135 data->fan_min[nr] & 0xff);
1136 it87_write_value(data, IT87_REG_FANX_MIN[nr],
1137 data->fan_min[nr] >> 8);
1138 mutex_unlock(&data->update_lock);
1139 return count;
1140}
1141
1142/* We want to use the same sysfs file names as 8-bit fans, but we need
1143 different variable names, so we have to use SENSOR_ATTR instead of
1144 SENSOR_DEVICE_ATTR. */
1145#define show_fan16_offset(offset) \
1146static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \
1147 = SENSOR_ATTR(fan##offset##_input, S_IRUGO, \
1148 show_fan16, NULL, offset - 1); \
1149static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \
1150 = SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
1151 show_fan16_min, set_fan16_min, offset - 1)
1152
1153show_fan16_offset(1);
1154show_fan16_offset(2);
1155show_fan16_offset(3);
1156show_fan16_offset(4);
1157show_fan16_offset(5);
1158
1159/* Alarms */
1160static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
1161 char *buf)
1162{
1163 struct it87_data *data = it87_update_device(dev);
1164 return sprintf(buf, "%u\n", data->alarms);
1165}
1166static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
1167
1168static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
1169 char *buf)
1170{
1171 int bitnr = to_sensor_dev_attr(attr)->index;
1172 struct it87_data *data = it87_update_device(dev);
1173 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
1174}
1175
1176static ssize_t clear_intrusion(struct device *dev, struct device_attribute
1177 *attr, const char *buf, size_t count)
1178{
1179 struct it87_data *data = dev_get_drvdata(dev);
1180 long val;
1181 int config;
1182
1183 if (strict_strtol(buf, 10, &val) < 0 || val != 0)
1184 return -EINVAL;
1185
1186 mutex_lock(&data->update_lock);
1187 config = it87_read_value(data, IT87_REG_CONFIG);
1188 if (config < 0) {
1189 count = config;
1190 } else {
1191 config |= 1 << 5;
1192 it87_write_value(data, IT87_REG_CONFIG, config);
1193 /* Invalidate cache to force re-read */
1194 data->valid = 0;
1195 }
1196 mutex_unlock(&data->update_lock);
1197
1198 return count;
1199}
1200
1201static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
1202static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
1203static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
1204static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
1205static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
1206static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
1207static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
1208static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
1209static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
1210static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
1211static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
1212static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
1213static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
1214static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
1215static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
1216static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
1217static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
1218 show_alarm, clear_intrusion, 4);
1219
1220static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
1221 char *buf)
1222{
1223 int bitnr = to_sensor_dev_attr(attr)->index;
1224 struct it87_data *data = it87_update_device(dev);
1225 return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
1226}
1227static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
1228 const char *buf, size_t count)
1229{
1230 int bitnr = to_sensor_dev_attr(attr)->index;
1231 struct it87_data *data = dev_get_drvdata(dev);
1232 long val;
1233
1234 if (strict_strtol(buf, 10, &val) < 0
1235 || (val != 0 && val != 1))
1236 return -EINVAL;
1237
1238 mutex_lock(&data->update_lock);
1239 data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
1240 if (val)
1241 data->beeps |= (1 << bitnr);
1242 else
1243 data->beeps &= ~(1 << bitnr);
1244 it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
1245 mutex_unlock(&data->update_lock);
1246 return count;
1247}
1248
1249static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
1250 show_beep, set_beep, 1);
1251static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
1252static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
1253static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
1254static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
1255static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
1256static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
1257static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
1258/* fanX_beep writability is set later */
1259static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
1260static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
1261static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
1262static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
1263static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
1264static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
1265 show_beep, set_beep, 2);
1266static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
1267static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
1268
1269static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
1270 char *buf)
1271{
1272 struct it87_data *data = dev_get_drvdata(dev);
1273 return sprintf(buf, "%u\n", data->vrm);
1274}
1275static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
1276 const char *buf, size_t count)
1277{
1278 struct it87_data *data = dev_get_drvdata(dev);
1279 unsigned long val;
1280
1281 if (strict_strtoul(buf, 10, &val) < 0)
1282 return -EINVAL;
1283
1284 data->vrm = val;
1285
1286 return count;
1287}
1288static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
1289
1290static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
1291 char *buf)
1292{
1293 struct it87_data *data = it87_update_device(dev);
1294 return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
1295}
1296static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
1297
1298static ssize_t show_label(struct device *dev, struct device_attribute *attr,
1299 char *buf)
1300{
1301 static const char *labels[] = {
1302 "+5V",
1303 "5VSB",
1304 "Vbat",
1305 };
1306 static const char *labels_it8721[] = {
1307 "+3.3V",
1308 "3VSB",
1309 "Vbat",
1310 };
1311 struct it87_data *data = dev_get_drvdata(dev);
1312 int nr = to_sensor_dev_attr(attr)->index;
1313
1314 return sprintf(buf, "%s\n", data->type == it8721 ? labels_it8721[nr]
1315 : labels[nr]);
1316}
1317static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
1318static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
1319static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2);
1320
1321static ssize_t show_name(struct device *dev, struct device_attribute
1322 *devattr, char *buf)
1323{
1324 struct it87_data *data = dev_get_drvdata(dev);
1325 return sprintf(buf, "%s\n", data->name);
1326}
1327static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1328
1329static struct attribute *it87_attributes[] = {
1330 &sensor_dev_attr_in0_input.dev_attr.attr,
1331 &sensor_dev_attr_in1_input.dev_attr.attr,
1332 &sensor_dev_attr_in2_input.dev_attr.attr,
1333 &sensor_dev_attr_in3_input.dev_attr.attr,
1334 &sensor_dev_attr_in4_input.dev_attr.attr,
1335 &sensor_dev_attr_in5_input.dev_attr.attr,
1336 &sensor_dev_attr_in6_input.dev_attr.attr,
1337 &sensor_dev_attr_in7_input.dev_attr.attr,
1338 &sensor_dev_attr_in8_input.dev_attr.attr,
1339 &sensor_dev_attr_in0_min.dev_attr.attr,
1340 &sensor_dev_attr_in1_min.dev_attr.attr,
1341 &sensor_dev_attr_in2_min.dev_attr.attr,
1342 &sensor_dev_attr_in3_min.dev_attr.attr,
1343 &sensor_dev_attr_in4_min.dev_attr.attr,
1344 &sensor_dev_attr_in5_min.dev_attr.attr,
1345 &sensor_dev_attr_in6_min.dev_attr.attr,
1346 &sensor_dev_attr_in7_min.dev_attr.attr,
1347 &sensor_dev_attr_in0_max.dev_attr.attr,
1348 &sensor_dev_attr_in1_max.dev_attr.attr,
1349 &sensor_dev_attr_in2_max.dev_attr.attr,
1350 &sensor_dev_attr_in3_max.dev_attr.attr,
1351 &sensor_dev_attr_in4_max.dev_attr.attr,
1352 &sensor_dev_attr_in5_max.dev_attr.attr,
1353 &sensor_dev_attr_in6_max.dev_attr.attr,
1354 &sensor_dev_attr_in7_max.dev_attr.attr,
1355 &sensor_dev_attr_in0_alarm.dev_attr.attr,
1356 &sensor_dev_attr_in1_alarm.dev_attr.attr,
1357 &sensor_dev_attr_in2_alarm.dev_attr.attr,
1358 &sensor_dev_attr_in3_alarm.dev_attr.attr,
1359 &sensor_dev_attr_in4_alarm.dev_attr.attr,
1360 &sensor_dev_attr_in5_alarm.dev_attr.attr,
1361 &sensor_dev_attr_in6_alarm.dev_attr.attr,
1362 &sensor_dev_attr_in7_alarm.dev_attr.attr,
1363
1364 &sensor_dev_attr_temp1_input.dev_attr.attr,
1365 &sensor_dev_attr_temp2_input.dev_attr.attr,
1366 &sensor_dev_attr_temp3_input.dev_attr.attr,
1367 &sensor_dev_attr_temp1_max.dev_attr.attr,
1368 &sensor_dev_attr_temp2_max.dev_attr.attr,
1369 &sensor_dev_attr_temp3_max.dev_attr.attr,
1370 &sensor_dev_attr_temp1_min.dev_attr.attr,
1371 &sensor_dev_attr_temp2_min.dev_attr.attr,
1372 &sensor_dev_attr_temp3_min.dev_attr.attr,
1373 &sensor_dev_attr_temp1_type.dev_attr.attr,
1374 &sensor_dev_attr_temp2_type.dev_attr.attr,
1375 &sensor_dev_attr_temp3_type.dev_attr.attr,
1376 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1377 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1378 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1379
1380 &dev_attr_alarms.attr,
1381 &sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
1382 &dev_attr_name.attr,
1383 NULL
1384};
1385
1386static const struct attribute_group it87_group = {
1387 .attrs = it87_attributes,
1388};
1389
1390static struct attribute *it87_attributes_beep[] = {
1391 &sensor_dev_attr_in0_beep.dev_attr.attr,
1392 &sensor_dev_attr_in1_beep.dev_attr.attr,
1393 &sensor_dev_attr_in2_beep.dev_attr.attr,
1394 &sensor_dev_attr_in3_beep.dev_attr.attr,
1395 &sensor_dev_attr_in4_beep.dev_attr.attr,
1396 &sensor_dev_attr_in5_beep.dev_attr.attr,
1397 &sensor_dev_attr_in6_beep.dev_attr.attr,
1398 &sensor_dev_attr_in7_beep.dev_attr.attr,
1399
1400 &sensor_dev_attr_temp1_beep.dev_attr.attr,
1401 &sensor_dev_attr_temp2_beep.dev_attr.attr,
1402 &sensor_dev_attr_temp3_beep.dev_attr.attr,
1403 NULL
1404};
1405
1406static const struct attribute_group it87_group_beep = {
1407 .attrs = it87_attributes_beep,
1408};
1409
1410static struct attribute *it87_attributes_fan16[5][3+1] = { {
1411 &sensor_dev_attr_fan1_input16.dev_attr.attr,
1412 &sensor_dev_attr_fan1_min16.dev_attr.attr,
1413 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1414 NULL
1415}, {
1416 &sensor_dev_attr_fan2_input16.dev_attr.attr,
1417 &sensor_dev_attr_fan2_min16.dev_attr.attr,
1418 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1419 NULL
1420}, {
1421 &sensor_dev_attr_fan3_input16.dev_attr.attr,
1422 &sensor_dev_attr_fan3_min16.dev_attr.attr,
1423 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1424 NULL
1425}, {
1426 &sensor_dev_attr_fan4_input16.dev_attr.attr,
1427 &sensor_dev_attr_fan4_min16.dev_attr.attr,
1428 &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1429 NULL
1430}, {
1431 &sensor_dev_attr_fan5_input16.dev_attr.attr,
1432 &sensor_dev_attr_fan5_min16.dev_attr.attr,
1433 &sensor_dev_attr_fan5_alarm.dev_attr.attr,
1434 NULL
1435} };
1436
1437static const struct attribute_group it87_group_fan16[5] = {
1438 { .attrs = it87_attributes_fan16[0] },
1439 { .attrs = it87_attributes_fan16[1] },
1440 { .attrs = it87_attributes_fan16[2] },
1441 { .attrs = it87_attributes_fan16[3] },
1442 { .attrs = it87_attributes_fan16[4] },
1443};
1444
1445static struct attribute *it87_attributes_fan[3][4+1] = { {
1446 &sensor_dev_attr_fan1_input.dev_attr.attr,
1447 &sensor_dev_attr_fan1_min.dev_attr.attr,
1448 &sensor_dev_attr_fan1_div.dev_attr.attr,
1449 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1450 NULL
1451}, {
1452 &sensor_dev_attr_fan2_input.dev_attr.attr,
1453 &sensor_dev_attr_fan2_min.dev_attr.attr,
1454 &sensor_dev_attr_fan2_div.dev_attr.attr,
1455 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1456 NULL
1457}, {
1458 &sensor_dev_attr_fan3_input.dev_attr.attr,
1459 &sensor_dev_attr_fan3_min.dev_attr.attr,
1460 &sensor_dev_attr_fan3_div.dev_attr.attr,
1461 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1462 NULL
1463} };
1464
1465static const struct attribute_group it87_group_fan[3] = {
1466 { .attrs = it87_attributes_fan[0] },
1467 { .attrs = it87_attributes_fan[1] },
1468 { .attrs = it87_attributes_fan[2] },
1469};
1470
1471static const struct attribute_group *
1472it87_get_fan_group(const struct it87_data *data)
1473{
1474 return has_16bit_fans(data) ? it87_group_fan16 : it87_group_fan;
1475}
1476
1477static struct attribute *it87_attributes_pwm[3][4+1] = { {
1478 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1479 &sensor_dev_attr_pwm1.dev_attr.attr,
1480 &dev_attr_pwm1_freq.attr,
1481 &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
1482 NULL
1483}, {
1484 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1485 &sensor_dev_attr_pwm2.dev_attr.attr,
1486 &dev_attr_pwm2_freq.attr,
1487 &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
1488 NULL
1489}, {
1490 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1491 &sensor_dev_attr_pwm3.dev_attr.attr,
1492 &dev_attr_pwm3_freq.attr,
1493 &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
1494 NULL
1495} };
1496
1497static const struct attribute_group it87_group_pwm[3] = {
1498 { .attrs = it87_attributes_pwm[0] },
1499 { .attrs = it87_attributes_pwm[1] },
1500 { .attrs = it87_attributes_pwm[2] },
1501};
1502
1503static struct attribute *it87_attributes_autopwm[3][9+1] = { {
1504 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
1505 &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
1506 &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
1507 &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
1508 &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
1509 &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
1510 &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
1511 &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
1512 &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
1513 NULL
1514}, {
1515 &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
1516 &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
1517 &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
1518 &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
1519 &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
1520 &sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr,
1521 &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
1522 &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
1523 &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
1524 NULL
1525}, {
1526 &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
1527 &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
1528 &sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
1529 &sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
1530 &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
1531 &sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr,
1532 &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
1533 &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
1534 &sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
1535 NULL
1536} };
1537
1538static const struct attribute_group it87_group_autopwm[3] = {
1539 { .attrs = it87_attributes_autopwm[0] },
1540 { .attrs = it87_attributes_autopwm[1] },
1541 { .attrs = it87_attributes_autopwm[2] },
1542};
1543
1544static struct attribute *it87_attributes_fan_beep[] = {
1545 &sensor_dev_attr_fan1_beep.dev_attr.attr,
1546 &sensor_dev_attr_fan2_beep.dev_attr.attr,
1547 &sensor_dev_attr_fan3_beep.dev_attr.attr,
1548 &sensor_dev_attr_fan4_beep.dev_attr.attr,
1549 &sensor_dev_attr_fan5_beep.dev_attr.attr,
1550};
1551
1552static struct attribute *it87_attributes_vid[] = {
1553 &dev_attr_vrm.attr,
1554 &dev_attr_cpu0_vid.attr,
1555 NULL
1556};
1557
1558static const struct attribute_group it87_group_vid = {
1559 .attrs = it87_attributes_vid,
1560};
1561
1562static struct attribute *it87_attributes_label[] = {
1563 &sensor_dev_attr_in3_label.dev_attr.attr,
1564 &sensor_dev_attr_in7_label.dev_attr.attr,
1565 &sensor_dev_attr_in8_label.dev_attr.attr,
1566 NULL
1567};
1568
1569static const struct attribute_group it87_group_label = {
1570 .attrs = it87_attributes_label,
1571};
1572
1573/* SuperIO detection - will change isa_address if a chip is found */
1574static int __init it87_find(unsigned short *address,
1575 struct it87_sio_data *sio_data)
1576{
1577 int err;
1578 u16 chip_type;
1579 const char *board_vendor, *board_name;
1580
1581 err = superio_enter();
1582 if (err)
1583 return err;
1584
1585 err = -ENODEV;
1586 chip_type = force_id ? force_id : superio_inw(DEVID);
1587
1588 switch (chip_type) {
1589 case IT8705F_DEVID:
1590 sio_data->type = it87;
1591 break;
1592 case IT8712F_DEVID:
1593 sio_data->type = it8712;
1594 break;
1595 case IT8716F_DEVID:
1596 case IT8726F_DEVID:
1597 sio_data->type = it8716;
1598 break;
1599 case IT8718F_DEVID:
1600 sio_data->type = it8718;
1601 break;
1602 case IT8720F_DEVID:
1603 sio_data->type = it8720;
1604 break;
1605 case IT8721F_DEVID:
1606 sio_data->type = it8721;
1607 break;
1608 case 0xffff: /* No device at all */
1609 goto exit;
1610 default:
1611 pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
1612 goto exit;
1613 }
1614
1615 superio_select(PME);
1616 if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
1617 pr_info("Device not activated, skipping\n");
1618 goto exit;
1619 }
1620
1621 *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
1622 if (*address == 0) {
1623 pr_info("Base address not set, skipping\n");
1624 goto exit;
1625 }
1626
1627 err = 0;
1628 sio_data->revision = superio_inb(DEVREV) & 0x0f;
1629 pr_info("Found IT%04xF chip at 0x%x, revision %d\n",
1630 chip_type, *address, sio_data->revision);
1631
1632 /* in8 (Vbat) is always internal */
1633 sio_data->internal = (1 << 2);
1634
1635 /* Read GPIO config and VID value from LDN 7 (GPIO) */
1636 if (sio_data->type == it87) {
1637 /* The IT8705F doesn't have VID pins at all */
1638 sio_data->skip_vid = 1;
1639
1640 /* The IT8705F has a different LD number for GPIO */
1641 superio_select(5);
1642 sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
1643 } else {
1644 int reg;
1645
1646 superio_select(GPIO);
1647
1648 reg = superio_inb(IT87_SIO_GPIO3_REG);
1649 if (sio_data->type == it8721) {
1650 /* The IT8721F/IT8758E doesn't have VID pins at all */
1651 sio_data->skip_vid = 1;
1652 } else {
1653 /* We need at least 4 VID pins */
1654 if (reg & 0x0f) {
1655 pr_info("VID is disabled (pins used for GPIO)\n");
1656 sio_data->skip_vid = 1;
1657 }
1658 }
1659
1660 /* Check if fan3 is there or not */
1661 if (reg & (1 << 6))
1662 sio_data->skip_pwm |= (1 << 2);
1663 if (reg & (1 << 7))
1664 sio_data->skip_fan |= (1 << 2);
1665
1666 /* Check if fan2 is there or not */
1667 reg = superio_inb(IT87_SIO_GPIO5_REG);
1668 if (reg & (1 << 1))
1669 sio_data->skip_pwm |= (1 << 1);
1670 if (reg & (1 << 2))
1671 sio_data->skip_fan |= (1 << 1);
1672
1673 if ((sio_data->type == it8718 || sio_data->type == it8720)
1674 && !(sio_data->skip_vid))
1675 sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
1676
1677 reg = superio_inb(IT87_SIO_PINX2_REG);
1678 /*
1679 * The IT8720F has no VIN7 pin, so VCCH should always be
1680 * routed internally to VIN7 with an internal divider.
1681 * Curiously, there still is a configuration bit to control
1682 * this, which means it can be set incorrectly. And even
1683 * more curiously, many boards out there are improperly
1684 * configured, even though the IT8720F datasheet claims
1685 * that the internal routing of VCCH to VIN7 is the default
1686 * setting. So we force the internal routing in this case.
1687 */
1688 if (sio_data->type == it8720 && !(reg & (1 << 1))) {
1689 reg |= (1 << 1);
1690 superio_outb(IT87_SIO_PINX2_REG, reg);
1691 pr_notice("Routing internal VCCH to in7\n");
1692 }
1693 if (reg & (1 << 0))
1694 sio_data->internal |= (1 << 0);
1695 if ((reg & (1 << 1)) || sio_data->type == it8721)
1696 sio_data->internal |= (1 << 1);
1697
1698 sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
1699 }
1700 if (sio_data->beep_pin)
1701 pr_info("Beeping is supported\n");
1702
1703 /* Disable specific features based on DMI strings */
1704 board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
1705 board_name = dmi_get_system_info(DMI_BOARD_NAME);
1706 if (board_vendor && board_name) {
1707 if (strcmp(board_vendor, "nVIDIA") == 0
1708 && strcmp(board_name, "FN68PT") == 0) {
1709 /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
1710 connected to a fan, but to something else. One user
1711 has reported instant system power-off when changing
1712 the PWM2 duty cycle, so we disable it.
1713 I use the board name string as the trigger in case
1714 the same board is ever used in other systems. */
1715 pr_info("Disabling pwm2 due to hardware constraints\n");
1716 sio_data->skip_pwm = (1 << 1);
1717 }
1718 }
1719
1720exit:
1721 superio_exit();
1722 return err;
1723}
1724
1725static void it87_remove_files(struct device *dev)
1726{
1727 struct it87_data *data = platform_get_drvdata(pdev);
1728 struct it87_sio_data *sio_data = dev->platform_data;
1729 const struct attribute_group *fan_group = it87_get_fan_group(data);
1730 int i;
1731
1732 sysfs_remove_group(&dev->kobj, &it87_group);
1733 if (sio_data->beep_pin)
1734 sysfs_remove_group(&dev->kobj, &it87_group_beep);
1735 for (i = 0; i < 5; i++) {
1736 if (!(data->has_fan & (1 << i)))
1737 continue;
1738 sysfs_remove_group(&dev->kobj, &fan_group[i]);
1739 if (sio_data->beep_pin)
1740 sysfs_remove_file(&dev->kobj,
1741 it87_attributes_fan_beep[i]);
1742 }
1743 for (i = 0; i < 3; i++) {
1744 if (sio_data->skip_pwm & (1 << 0))
1745 continue;
1746 sysfs_remove_group(&dev->kobj, &it87_group_pwm[i]);
1747 if (has_old_autopwm(data))
1748 sysfs_remove_group(&dev->kobj,
1749 &it87_group_autopwm[i]);
1750 }
1751 if (!sio_data->skip_vid)
1752 sysfs_remove_group(&dev->kobj, &it87_group_vid);
1753 sysfs_remove_group(&dev->kobj, &it87_group_label);
1754}
1755
1756static int __devinit it87_probe(struct platform_device *pdev)
1757{
1758 struct it87_data *data;
1759 struct resource *res;
1760 struct device *dev = &pdev->dev;
1761 struct it87_sio_data *sio_data = dev->platform_data;
1762 const struct attribute_group *fan_group;
1763 int err = 0, i;
1764 int enable_pwm_interface;
1765 int fan_beep_need_rw;
1766 static const char *names[] = {
1767 "it87",
1768 "it8712",
1769 "it8716",
1770 "it8718",
1771 "it8720",
1772 "it8721",
1773 };
1774
1775 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1776 if (!request_region(res->start, IT87_EC_EXTENT, DRVNAME)) {
1777 dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
1778 (unsigned long)res->start,
1779 (unsigned long)(res->start + IT87_EC_EXTENT - 1));
1780 err = -EBUSY;
1781 goto ERROR0;
1782 }
1783
1784 data = kzalloc(sizeof(struct it87_data), GFP_KERNEL);
1785 if (!data) {
1786 err = -ENOMEM;
1787 goto ERROR1;
1788 }
1789
1790 data->addr = res->start;
1791 data->type = sio_data->type;
1792 data->revision = sio_data->revision;
1793 data->name = names[sio_data->type];
1794
1795 /* Now, we do the remaining detection. */
1796 if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
1797 || it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
1798 err = -ENODEV;
1799 goto ERROR2;
1800 }
1801
1802 platform_set_drvdata(pdev, data);
1803
1804 mutex_init(&data->update_lock);
1805
1806 /* Check PWM configuration */
1807 enable_pwm_interface = it87_check_pwm(dev);
1808
1809 /* Starting with IT8721F, we handle scaling of internal voltages */
1810 if (data->type == it8721) {
1811 if (sio_data->internal & (1 << 0))
1812 data->in_scaled |= (1 << 3); /* in3 is AVCC */
1813 if (sio_data->internal & (1 << 1))
1814 data->in_scaled |= (1 << 7); /* in7 is VSB */
1815 if (sio_data->internal & (1 << 2))
1816 data->in_scaled |= (1 << 8); /* in8 is Vbat */
1817 }
1818
1819 /* Initialize the IT87 chip */
1820 it87_init_device(pdev);
1821
1822 /* Register sysfs hooks */
1823 err = sysfs_create_group(&dev->kobj, &it87_group);
1824 if (err)
1825 goto ERROR2;
1826
1827 if (sio_data->beep_pin) {
1828 err = sysfs_create_group(&dev->kobj, &it87_group_beep);
1829 if (err)
1830 goto ERROR4;
1831 }
1832
1833 /* Do not create fan files for disabled fans */
1834 fan_group = it87_get_fan_group(data);
1835 fan_beep_need_rw = 1;
1836 for (i = 0; i < 5; i++) {
1837 if (!(data->has_fan & (1 << i)))
1838 continue;
1839 err = sysfs_create_group(&dev->kobj, &fan_group[i]);
1840 if (err)
1841 goto ERROR4;
1842
1843 if (sio_data->beep_pin) {
1844 err = sysfs_create_file(&dev->kobj,
1845 it87_attributes_fan_beep[i]);
1846 if (err)
1847 goto ERROR4;
1848 if (!fan_beep_need_rw)
1849 continue;
1850
1851 /* As we have a single beep enable bit for all fans,
1852 * only the first enabled fan has a writable attribute
1853 * for it. */
1854 if (sysfs_chmod_file(&dev->kobj,
1855 it87_attributes_fan_beep[i],
1856 S_IRUGO | S_IWUSR))
1857 dev_dbg(dev, "chmod +w fan%d_beep failed\n",
1858 i + 1);
1859 fan_beep_need_rw = 0;
1860 }
1861 }
1862
1863 if (enable_pwm_interface) {
1864 for (i = 0; i < 3; i++) {
1865 if (sio_data->skip_pwm & (1 << i))
1866 continue;
1867 err = sysfs_create_group(&dev->kobj,
1868 &it87_group_pwm[i]);
1869 if (err)
1870 goto ERROR4;
1871
1872 if (!has_old_autopwm(data))
1873 continue;
1874 err = sysfs_create_group(&dev->kobj,
1875 &it87_group_autopwm[i]);
1876 if (err)
1877 goto ERROR4;
1878 }
1879 }
1880
1881 if (!sio_data->skip_vid) {
1882 data->vrm = vid_which_vrm();
1883 /* VID reading from Super-I/O config space if available */
1884 data->vid = sio_data->vid_value;
1885 err = sysfs_create_group(&dev->kobj, &it87_group_vid);
1886 if (err)
1887 goto ERROR4;
1888 }
1889
1890 /* Export labels for internal sensors */
1891 for (i = 0; i < 3; i++) {
1892 if (!(sio_data->internal & (1 << i)))
1893 continue;
1894 err = sysfs_create_file(&dev->kobj,
1895 it87_attributes_label[i]);
1896 if (err)
1897 goto ERROR4;
1898 }
1899
1900 data->hwmon_dev = hwmon_device_register(dev);
1901 if (IS_ERR(data->hwmon_dev)) {
1902 err = PTR_ERR(data->hwmon_dev);
1903 goto ERROR4;
1904 }
1905
1906 return 0;
1907
1908ERROR4:
1909 it87_remove_files(dev);
1910ERROR2:
1911 platform_set_drvdata(pdev, NULL);
1912 kfree(data);
1913ERROR1:
1914 release_region(res->start, IT87_EC_EXTENT);
1915ERROR0:
1916 return err;
1917}
1918
1919static int __devexit it87_remove(struct platform_device *pdev)
1920{
1921 struct it87_data *data = platform_get_drvdata(pdev);
1922
1923 hwmon_device_unregister(data->hwmon_dev);
1924 it87_remove_files(&pdev->dev);
1925
1926 release_region(data->addr, IT87_EC_EXTENT);
1927 platform_set_drvdata(pdev, NULL);
1928 kfree(data);
1929
1930 return 0;
1931}
1932
1933/* Must be called with data->update_lock held, except during initialization.
1934 We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
1935 would slow down the IT87 access and should not be necessary. */
1936static int it87_read_value(struct it87_data *data, u8 reg)
1937{
1938 outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
1939 return inb_p(data->addr + IT87_DATA_REG_OFFSET);
1940}
1941
1942/* Must be called with data->update_lock held, except during initialization.
1943 We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
1944 would slow down the IT87 access and should not be necessary. */
1945static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
1946{
1947 outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
1948 outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
1949}
1950
1951/* Return 1 if and only if the PWM interface is safe to use */
1952static int __devinit it87_check_pwm(struct device *dev)
1953{
1954 struct it87_data *data = dev_get_drvdata(dev);
1955 /* Some BIOSes fail to correctly configure the IT87 fans. All fans off
1956 * and polarity set to active low is sign that this is the case so we
1957 * disable pwm control to protect the user. */
1958 int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
1959 if ((tmp & 0x87) == 0) {
1960 if (fix_pwm_polarity) {
1961 /* The user asks us to attempt a chip reconfiguration.
1962 * This means switching to active high polarity and
1963 * inverting all fan speed values. */
1964 int i;
1965 u8 pwm[3];
1966
1967 for (i = 0; i < 3; i++)
1968 pwm[i] = it87_read_value(data,
1969 IT87_REG_PWM(i));
1970
1971 /* If any fan is in automatic pwm mode, the polarity
1972 * might be correct, as suspicious as it seems, so we
1973 * better don't change anything (but still disable the
1974 * PWM interface). */
1975 if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
1976 dev_info(dev, "Reconfiguring PWM to "
1977 "active high polarity\n");
1978 it87_write_value(data, IT87_REG_FAN_CTL,
1979 tmp | 0x87);
1980 for (i = 0; i < 3; i++)
1981 it87_write_value(data,
1982 IT87_REG_PWM(i),
1983 0x7f & ~pwm[i]);
1984 return 1;
1985 }
1986
1987 dev_info(dev, "PWM configuration is "
1988 "too broken to be fixed\n");
1989 }
1990
1991 dev_info(dev, "Detected broken BIOS "
1992 "defaults, disabling PWM interface\n");
1993 return 0;
1994 } else if (fix_pwm_polarity) {
1995 dev_info(dev, "PWM configuration looks "
1996 "sane, won't touch\n");
1997 }
1998
1999 return 1;
2000}
2001
2002/* Called when we have found a new IT87. */
2003static void __devinit it87_init_device(struct platform_device *pdev)
2004{
2005 struct it87_sio_data *sio_data = pdev->dev.platform_data;
2006 struct it87_data *data = platform_get_drvdata(pdev);
2007 int tmp, i;
2008 u8 mask;
2009
2010 /* For each PWM channel:
2011 * - If it is in automatic mode, setting to manual mode should set
2012 * the fan to full speed by default.
2013 * - If it is in manual mode, we need a mapping to temperature
2014 * channels to use when later setting to automatic mode later.
2015 * Use a 1:1 mapping by default (we are clueless.)
2016 * In both cases, the value can (and should) be changed by the user
2017 * prior to switching to a different mode.
2018 * Note that this is no longer needed for the IT8721F and later, as
2019 * these have separate registers for the temperature mapping and the
2020 * manual duty cycle. */
2021 for (i = 0; i < 3; i++) {
2022 data->pwm_temp_map[i] = i;
2023 data->pwm_duty[i] = 0x7f; /* Full speed */
2024 data->auto_pwm[i][3] = 0x7f; /* Full speed, hard-coded */
2025 }
2026
2027 /* Some chips seem to have default value 0xff for all limit
2028 * registers. For low voltage limits it makes no sense and triggers
2029 * alarms, so change to 0 instead. For high temperature limits, it
2030 * means -1 degree C, which surprisingly doesn't trigger an alarm,
2031 * but is still confusing, so change to 127 degrees C. */
2032 for (i = 0; i < 8; i++) {
2033 tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
2034 if (tmp == 0xff)
2035 it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
2036 }
2037 for (i = 0; i < 3; i++) {
2038 tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
2039 if (tmp == 0xff)
2040 it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
2041 }
2042
2043 /* Temperature channels are not forcibly enabled, as they can be
2044 * set to two different sensor types and we can't guess which one
2045 * is correct for a given system. These channels can be enabled at
2046 * run-time through the temp{1-3}_type sysfs accessors if needed. */
2047
2048 /* Check if voltage monitors are reset manually or by some reason */
2049 tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
2050 if ((tmp & 0xff) == 0) {
2051 /* Enable all voltage monitors */
2052 it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
2053 }
2054
2055 /* Check if tachometers are reset manually or by some reason */
2056 mask = 0x70 & ~(sio_data->skip_fan << 4);
2057 data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
2058 if ((data->fan_main_ctrl & mask) == 0) {
2059 /* Enable all fan tachometers */
2060 data->fan_main_ctrl |= mask;
2061 it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
2062 data->fan_main_ctrl);
2063 }
2064 data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
2065
2066 /* Set tachometers to 16-bit mode if needed */
2067 if (has_16bit_fans(data)) {
2068 tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
2069 if (~tmp & 0x07 & data->has_fan) {
2070 dev_dbg(&pdev->dev,
2071 "Setting fan1-3 to 16-bit mode\n");
2072 it87_write_value(data, IT87_REG_FAN_16BIT,
2073 tmp | 0x07);
2074 }
2075 /* IT8705F only supports three fans. */
2076 if (data->type != it87) {
2077 if (tmp & (1 << 4))
2078 data->has_fan |= (1 << 3); /* fan4 enabled */
2079 if (tmp & (1 << 5))
2080 data->has_fan |= (1 << 4); /* fan5 enabled */
2081 }
2082 }
2083
2084 /* Fan input pins may be used for alternative functions */
2085 data->has_fan &= ~sio_data->skip_fan;
2086
2087 /* Start monitoring */
2088 it87_write_value(data, IT87_REG_CONFIG,
2089 (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
2090 | (update_vbat ? 0x41 : 0x01));
2091}
2092
2093static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
2094{
2095 data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
2096 if (data->type == it8721) {
2097 data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
2098 data->pwm_duty[nr] = it87_read_value(data,
2099 IT87_REG_PWM_DUTY(nr));
2100 } else {
2101 if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
2102 data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
2103 else /* Manual mode */
2104 data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
2105 }
2106
2107 if (has_old_autopwm(data)) {
2108 int i;
2109
2110 for (i = 0; i < 5 ; i++)
2111 data->auto_temp[nr][i] = it87_read_value(data,
2112 IT87_REG_AUTO_TEMP(nr, i));
2113 for (i = 0; i < 3 ; i++)
2114 data->auto_pwm[nr][i] = it87_read_value(data,
2115 IT87_REG_AUTO_PWM(nr, i));
2116 }
2117}
2118
2119static struct it87_data *it87_update_device(struct device *dev)
2120{
2121 struct it87_data *data = dev_get_drvdata(dev);
2122 int i;
2123
2124 mutex_lock(&data->update_lock);
2125
2126 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
2127 || !data->valid) {
2128 if (update_vbat) {
2129 /* Cleared after each update, so reenable. Value
2130 returned by this read will be previous value */
2131 it87_write_value(data, IT87_REG_CONFIG,
2132 it87_read_value(data, IT87_REG_CONFIG) | 0x40);
2133 }
2134 for (i = 0; i <= 7; i++) {
2135 data->in[i] =
2136 it87_read_value(data, IT87_REG_VIN(i));
2137 data->in_min[i] =
2138 it87_read_value(data, IT87_REG_VIN_MIN(i));
2139 data->in_max[i] =
2140 it87_read_value(data, IT87_REG_VIN_MAX(i));
2141 }
2142 /* in8 (battery) has no limit registers */
2143 data->in[8] = it87_read_value(data, IT87_REG_VIN(8));
2144
2145 for (i = 0; i < 5; i++) {
2146 /* Skip disabled fans */
2147 if (!(data->has_fan & (1 << i)))
2148 continue;
2149
2150 data->fan_min[i] =
2151 it87_read_value(data, IT87_REG_FAN_MIN[i]);
2152 data->fan[i] = it87_read_value(data,
2153 IT87_REG_FAN[i]);
2154 /* Add high byte if in 16-bit mode */
2155 if (has_16bit_fans(data)) {
2156 data->fan[i] |= it87_read_value(data,
2157 IT87_REG_FANX[i]) << 8;
2158 data->fan_min[i] |= it87_read_value(data,
2159 IT87_REG_FANX_MIN[i]) << 8;
2160 }
2161 }
2162 for (i = 0; i < 3; i++) {
2163 data->temp[i] =
2164 it87_read_value(data, IT87_REG_TEMP(i));
2165 data->temp_high[i] =
2166 it87_read_value(data, IT87_REG_TEMP_HIGH(i));
2167 data->temp_low[i] =
2168 it87_read_value(data, IT87_REG_TEMP_LOW(i));
2169 }
2170
2171 /* Newer chips don't have clock dividers */
2172 if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
2173 i = it87_read_value(data, IT87_REG_FAN_DIV);
2174 data->fan_div[0] = i & 0x07;
2175 data->fan_div[1] = (i >> 3) & 0x07;
2176 data->fan_div[2] = (i & 0x40) ? 3 : 1;
2177 }
2178
2179 data->alarms =
2180 it87_read_value(data, IT87_REG_ALARM1) |
2181 (it87_read_value(data, IT87_REG_ALARM2) << 8) |
2182 (it87_read_value(data, IT87_REG_ALARM3) << 16);
2183 data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
2184
2185 data->fan_main_ctrl = it87_read_value(data,
2186 IT87_REG_FAN_MAIN_CTRL);
2187 data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
2188 for (i = 0; i < 3; i++)
2189 it87_update_pwm_ctrl(data, i);
2190
2191 data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
2192 /* The 8705 does not have VID capability.
2193 The 8718 and later don't use IT87_REG_VID for the
2194 same purpose. */
2195 if (data->type == it8712 || data->type == it8716) {
2196 data->vid = it87_read_value(data, IT87_REG_VID);
2197 /* The older IT8712F revisions had only 5 VID pins,
2198 but we assume it is always safe to read 6 bits. */
2199 data->vid &= 0x3f;
2200 }
2201 data->last_updated = jiffies;
2202 data->valid = 1;
2203 }
2204
2205 mutex_unlock(&data->update_lock);
2206
2207 return data;
2208}
2209
2210static int __init it87_device_add(unsigned short address,
2211 const struct it87_sio_data *sio_data)
2212{
2213 struct resource res = {
2214 .start = address + IT87_EC_OFFSET,
2215 .end = address + IT87_EC_OFFSET + IT87_EC_EXTENT - 1,
2216 .name = DRVNAME,
2217 .flags = IORESOURCE_IO,
2218 };
2219 int err;
2220
2221 err = acpi_check_resource_conflict(&res);
2222 if (err)
2223 goto exit;
2224
2225 pdev = platform_device_alloc(DRVNAME, address);
2226 if (!pdev) {
2227 err = -ENOMEM;
2228 pr_err("Device allocation failed\n");
2229 goto exit;
2230 }
2231
2232 err = platform_device_add_resources(pdev, &res, 1);
2233 if (err) {
2234 pr_err("Device resource addition failed (%d)\n", err);
2235 goto exit_device_put;
2236 }
2237
2238 err = platform_device_add_data(pdev, sio_data,
2239 sizeof(struct it87_sio_data));
2240 if (err) {
2241 pr_err("Platform data allocation failed\n");
2242 goto exit_device_put;
2243 }
2244
2245 err = platform_device_add(pdev);
2246 if (err) {
2247 pr_err("Device addition failed (%d)\n", err);
2248 goto exit_device_put;
2249 }
2250
2251 return 0;
2252
2253exit_device_put:
2254 platform_device_put(pdev);
2255exit:
2256 return err;
2257}
2258
2259static int __init sm_it87_init(void)
2260{
2261 int err;
2262 unsigned short isa_address = 0;
2263 struct it87_sio_data sio_data;
2264
2265 memset(&sio_data, 0, sizeof(struct it87_sio_data));
2266 err = it87_find(&isa_address, &sio_data);
2267 if (err)
2268 return err;
2269 err = platform_driver_register(&it87_driver);
2270 if (err)
2271 return err;
2272
2273 err = it87_device_add(isa_address, &sio_data);
2274 if (err) {
2275 platform_driver_unregister(&it87_driver);
2276 return err;
2277 }
2278
2279 return 0;
2280}
2281
2282static void __exit sm_it87_exit(void)
2283{
2284 platform_device_unregister(pdev);
2285 platform_driver_unregister(&it87_driver);
2286}
2287
2288
2289MODULE_AUTHOR("Chris Gauthron, "
2290 "Jean Delvare <khali@linux-fr.org>");
2291MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver");
2292module_param(update_vbat, bool, 0);
2293MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
2294module_param(fix_pwm_polarity, bool, 0);
2295MODULE_PARM_DESC(fix_pwm_polarity,
2296 "Force PWM polarity to active high (DANGEROUS)");
2297MODULE_LICENSE("GPL");
2298
2299module_init(sm_it87_init);
2300module_exit(sm_it87_exit);
1/*
2 * it87.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring.
4 *
5 * The IT8705F is an LPC-based Super I/O part that contains UARTs, a
6 * parallel port, an IR port, a MIDI port, a floppy controller, etc., in
7 * addition to an Environment Controller (Enhanced Hardware Monitor and
8 * Fan Controller)
9 *
10 * This driver supports only the Environment Controller in the IT8705F and
11 * similar parts. The other devices are supported by different drivers.
12 *
13 * Supports: IT8603E Super I/O chip w/LPC interface
14 * IT8620E Super I/O chip w/LPC interface
15 * IT8623E Super I/O chip w/LPC interface
16 * IT8705F Super I/O chip w/LPC interface
17 * IT8712F Super I/O chip w/LPC interface
18 * IT8716F Super I/O chip w/LPC interface
19 * IT8718F Super I/O chip w/LPC interface
20 * IT8720F Super I/O chip w/LPC interface
21 * IT8721F Super I/O chip w/LPC interface
22 * IT8726F Super I/O chip w/LPC interface
23 * IT8728F Super I/O chip w/LPC interface
24 * IT8732F Super I/O chip w/LPC interface
25 * IT8758E Super I/O chip w/LPC interface
26 * IT8771E Super I/O chip w/LPC interface
27 * IT8772E Super I/O chip w/LPC interface
28 * IT8781F Super I/O chip w/LPC interface
29 * IT8782F Super I/O chip w/LPC interface
30 * IT8783E/F Super I/O chip w/LPC interface
31 * IT8786E Super I/O chip w/LPC interface
32 * IT8790E Super I/O chip w/LPC interface
33 * Sis950 A clone of the IT8705F
34 *
35 * Copyright (C) 2001 Chris Gauthron
36 * Copyright (C) 2005-2010 Jean Delvare <jdelvare@suse.de>
37 *
38 * This program is free software; you can redistribute it and/or modify
39 * it under the terms of the GNU General Public License as published by
40 * the Free Software Foundation; either version 2 of the License, or
41 * (at your option) any later version.
42 *
43 * This program is distributed in the hope that it will be useful,
44 * but WITHOUT ANY WARRANTY; without even the implied warranty of
45 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
46 * GNU General Public License for more details.
47 *
48 * You should have received a copy of the GNU General Public License
49 * along with this program; if not, write to the Free Software
50 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
51 */
52
53#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
54
55#include <linux/module.h>
56#include <linux/init.h>
57#include <linux/slab.h>
58#include <linux/jiffies.h>
59#include <linux/platform_device.h>
60#include <linux/hwmon.h>
61#include <linux/hwmon-sysfs.h>
62#include <linux/hwmon-vid.h>
63#include <linux/err.h>
64#include <linux/mutex.h>
65#include <linux/sysfs.h>
66#include <linux/string.h>
67#include <linux/dmi.h>
68#include <linux/acpi.h>
69#include <linux/io.h>
70
71#define DRVNAME "it87"
72
73enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8732,
74 it8771, it8772, it8781, it8782, it8783, it8786, it8790, it8603,
75 it8620 };
76
77static unsigned short force_id;
78module_param(force_id, ushort, 0);
79MODULE_PARM_DESC(force_id, "Override the detected device ID");
80
81static struct platform_device *pdev;
82
83#define REG 0x2e /* The register to read/write */
84#define DEV 0x07 /* Register: Logical device select */
85#define VAL 0x2f /* The value to read/write */
86#define PME 0x04 /* The device with the fan registers in it */
87
88/* The device with the IT8718F/IT8720F VID value in it */
89#define GPIO 0x07
90
91#define DEVID 0x20 /* Register: Device ID */
92#define DEVREV 0x22 /* Register: Device Revision */
93
94static inline int superio_inb(int reg)
95{
96 outb(reg, REG);
97 return inb(VAL);
98}
99
100static inline void superio_outb(int reg, int val)
101{
102 outb(reg, REG);
103 outb(val, VAL);
104}
105
106static int superio_inw(int reg)
107{
108 int val;
109 outb(reg++, REG);
110 val = inb(VAL) << 8;
111 outb(reg, REG);
112 val |= inb(VAL);
113 return val;
114}
115
116static inline void superio_select(int ldn)
117{
118 outb(DEV, REG);
119 outb(ldn, VAL);
120}
121
122static inline int superio_enter(void)
123{
124 /*
125 * Try to reserve REG and REG + 1 for exclusive access.
126 */
127 if (!request_muxed_region(REG, 2, DRVNAME))
128 return -EBUSY;
129
130 outb(0x87, REG);
131 outb(0x01, REG);
132 outb(0x55, REG);
133 outb(0x55, REG);
134 return 0;
135}
136
137static inline void superio_exit(void)
138{
139 outb(0x02, REG);
140 outb(0x02, VAL);
141 release_region(REG, 2);
142}
143
144/* Logical device 4 registers */
145#define IT8712F_DEVID 0x8712
146#define IT8705F_DEVID 0x8705
147#define IT8716F_DEVID 0x8716
148#define IT8718F_DEVID 0x8718
149#define IT8720F_DEVID 0x8720
150#define IT8721F_DEVID 0x8721
151#define IT8726F_DEVID 0x8726
152#define IT8728F_DEVID 0x8728
153#define IT8732F_DEVID 0x8732
154#define IT8771E_DEVID 0x8771
155#define IT8772E_DEVID 0x8772
156#define IT8781F_DEVID 0x8781
157#define IT8782F_DEVID 0x8782
158#define IT8783E_DEVID 0x8783
159#define IT8786E_DEVID 0x8786
160#define IT8790E_DEVID 0x8790
161#define IT8603E_DEVID 0x8603
162#define IT8620E_DEVID 0x8620
163#define IT8623E_DEVID 0x8623
164#define IT87_ACT_REG 0x30
165#define IT87_BASE_REG 0x60
166
167/* Logical device 7 registers (IT8712F and later) */
168#define IT87_SIO_GPIO1_REG 0x25
169#define IT87_SIO_GPIO2_REG 0x26
170#define IT87_SIO_GPIO3_REG 0x27
171#define IT87_SIO_GPIO5_REG 0x29
172#define IT87_SIO_PINX1_REG 0x2a /* Pin selection */
173#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
174#define IT87_SIO_SPI_REG 0xef /* SPI function pin select */
175#define IT87_SIO_VID_REG 0xfc /* VID value */
176#define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
177
178/* Update battery voltage after every reading if true */
179static bool update_vbat;
180
181/* Not all BIOSes properly configure the PWM registers */
182static bool fix_pwm_polarity;
183
184/* Many IT87 constants specified below */
185
186/* Length of ISA address segment */
187#define IT87_EXTENT 8
188
189/* Length of ISA address segment for Environmental Controller */
190#define IT87_EC_EXTENT 2
191
192/* Offset of EC registers from ISA base address */
193#define IT87_EC_OFFSET 5
194
195/* Where are the ISA address/data registers relative to the EC base address */
196#define IT87_ADDR_REG_OFFSET 0
197#define IT87_DATA_REG_OFFSET 1
198
199/*----- The IT87 registers -----*/
200
201#define IT87_REG_CONFIG 0x00
202
203#define IT87_REG_ALARM1 0x01
204#define IT87_REG_ALARM2 0x02
205#define IT87_REG_ALARM3 0x03
206
207/*
208 * The IT8718F and IT8720F have the VID value in a different register, in
209 * Super-I/O configuration space.
210 */
211#define IT87_REG_VID 0x0a
212/*
213 * The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
214 * for fan divisors. Later IT8712F revisions must use 16-bit tachometer
215 * mode.
216 */
217#define IT87_REG_FAN_DIV 0x0b
218#define IT87_REG_FAN_16BIT 0x0c
219
220/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
221
222static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82, 0x4c };
223static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86, 0x4e };
224static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83, 0x4d };
225static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87, 0x4f };
226static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
227
228#define IT87_REG_FAN_MAIN_CTRL 0x13
229#define IT87_REG_FAN_CTL 0x14
230#define IT87_REG_PWM(nr) (0x15 + (nr))
231#define IT87_REG_PWM_DUTY(nr) (0x63 + (nr) * 8)
232
233#define IT87_REG_VIN(nr) (0x20 + (nr))
234#define IT87_REG_TEMP(nr) (0x29 + (nr))
235
236#define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2)
237#define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2)
238#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
239#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2)
240
241#define IT87_REG_VIN_ENABLE 0x50
242#define IT87_REG_TEMP_ENABLE 0x51
243#define IT87_REG_TEMP_EXTRA 0x55
244#define IT87_REG_BEEP_ENABLE 0x5c
245
246#define IT87_REG_CHIPID 0x58
247
248#define IT87_REG_AUTO_TEMP(nr, i) (0x60 + (nr) * 8 + (i))
249#define IT87_REG_AUTO_PWM(nr, i) (0x65 + (nr) * 8 + (i))
250
251struct it87_devices {
252 const char *name;
253 const char * const suffix;
254 u16 features;
255 u8 peci_mask;
256 u8 old_peci_mask;
257};
258
259#define FEAT_12MV_ADC (1 << 0)
260#define FEAT_NEWER_AUTOPWM (1 << 1)
261#define FEAT_OLD_AUTOPWM (1 << 2)
262#define FEAT_16BIT_FANS (1 << 3)
263#define FEAT_TEMP_OFFSET (1 << 4)
264#define FEAT_TEMP_PECI (1 << 5)
265#define FEAT_TEMP_OLD_PECI (1 << 6)
266#define FEAT_FAN16_CONFIG (1 << 7) /* Need to enable 16-bit fans */
267#define FEAT_FIVE_FANS (1 << 8) /* Supports five fans */
268#define FEAT_VID (1 << 9) /* Set if chip supports VID */
269#define FEAT_IN7_INTERNAL (1 << 10) /* Set if in7 is internal */
270#define FEAT_SIX_FANS (1 << 11) /* Supports six fans */
271#define FEAT_10_9MV_ADC (1 << 12)
272
273static const struct it87_devices it87_devices[] = {
274 [it87] = {
275 .name = "it87",
276 .suffix = "F",
277 .features = FEAT_OLD_AUTOPWM, /* may need to overwrite */
278 },
279 [it8712] = {
280 .name = "it8712",
281 .suffix = "F",
282 .features = FEAT_OLD_AUTOPWM | FEAT_VID,
283 /* may need to overwrite */
284 },
285 [it8716] = {
286 .name = "it8716",
287 .suffix = "F",
288 .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
289 | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
290 },
291 [it8718] = {
292 .name = "it8718",
293 .suffix = "F",
294 .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
295 | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
296 .old_peci_mask = 0x4,
297 },
298 [it8720] = {
299 .name = "it8720",
300 .suffix = "F",
301 .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
302 | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
303 .old_peci_mask = 0x4,
304 },
305 [it8721] = {
306 .name = "it8721",
307 .suffix = "F",
308 .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
309 | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
310 | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_IN7_INTERNAL,
311 .peci_mask = 0x05,
312 .old_peci_mask = 0x02, /* Actually reports PCH */
313 },
314 [it8728] = {
315 .name = "it8728",
316 .suffix = "F",
317 .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
318 | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
319 | FEAT_IN7_INTERNAL,
320 .peci_mask = 0x07,
321 },
322 [it8732] = {
323 .name = "it8732",
324 .suffix = "F",
325 .features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
326 | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
327 | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL,
328 .peci_mask = 0x07,
329 .old_peci_mask = 0x02, /* Actually reports PCH */
330 },
331 [it8771] = {
332 .name = "it8771",
333 .suffix = "E",
334 .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
335 | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
336 /* PECI: guesswork */
337 /* 12mV ADC (OHM) */
338 /* 16 bit fans (OHM) */
339 /* three fans, always 16 bit (guesswork) */
340 .peci_mask = 0x07,
341 },
342 [it8772] = {
343 .name = "it8772",
344 .suffix = "E",
345 .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
346 | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
347 /* PECI (coreboot) */
348 /* 12mV ADC (HWSensors4, OHM) */
349 /* 16 bit fans (HWSensors4, OHM) */
350 /* three fans, always 16 bit (datasheet) */
351 .peci_mask = 0x07,
352 },
353 [it8781] = {
354 .name = "it8781",
355 .suffix = "F",
356 .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
357 | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
358 .old_peci_mask = 0x4,
359 },
360 [it8782] = {
361 .name = "it8782",
362 .suffix = "F",
363 .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
364 | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
365 .old_peci_mask = 0x4,
366 },
367 [it8783] = {
368 .name = "it8783",
369 .suffix = "E/F",
370 .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
371 | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
372 .old_peci_mask = 0x4,
373 },
374 [it8786] = {
375 .name = "it8786",
376 .suffix = "E",
377 .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
378 | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
379 .peci_mask = 0x07,
380 },
381 [it8790] = {
382 .name = "it8790",
383 .suffix = "E",
384 .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
385 | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
386 .peci_mask = 0x07,
387 },
388 [it8603] = {
389 .name = "it8603",
390 .suffix = "E",
391 .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
392 | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
393 .peci_mask = 0x07,
394 },
395 [it8620] = {
396 .name = "it8620",
397 .suffix = "E",
398 .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
399 | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
400 | FEAT_IN7_INTERNAL,
401 .peci_mask = 0x07,
402 },
403};
404
405#define has_16bit_fans(data) ((data)->features & FEAT_16BIT_FANS)
406#define has_12mv_adc(data) ((data)->features & FEAT_12MV_ADC)
407#define has_10_9mv_adc(data) ((data)->features & FEAT_10_9MV_ADC)
408#define has_newer_autopwm(data) ((data)->features & FEAT_NEWER_AUTOPWM)
409#define has_old_autopwm(data) ((data)->features & FEAT_OLD_AUTOPWM)
410#define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET)
411#define has_temp_peci(data, nr) (((data)->features & FEAT_TEMP_PECI) && \
412 ((data)->peci_mask & (1 << nr)))
413#define has_temp_old_peci(data, nr) \
414 (((data)->features & FEAT_TEMP_OLD_PECI) && \
415 ((data)->old_peci_mask & (1 << nr)))
416#define has_fan16_config(data) ((data)->features & FEAT_FAN16_CONFIG)
417#define has_five_fans(data) ((data)->features & (FEAT_FIVE_FANS | \
418 FEAT_SIX_FANS))
419#define has_vid(data) ((data)->features & FEAT_VID)
420#define has_in7_internal(data) ((data)->features & FEAT_IN7_INTERNAL)
421#define has_six_fans(data) ((data)->features & FEAT_SIX_FANS)
422
423struct it87_sio_data {
424 enum chips type;
425 /* Values read from Super-I/O config space */
426 u8 revision;
427 u8 vid_value;
428 u8 beep_pin;
429 u8 internal; /* Internal sensors can be labeled */
430 /* Features skipped based on config or DMI */
431 u16 skip_in;
432 u8 skip_vid;
433 u8 skip_fan;
434 u8 skip_pwm;
435 u8 skip_temp;
436};
437
438/*
439 * For each registered chip, we need to keep some data in memory.
440 * The structure is dynamically allocated.
441 */
442struct it87_data {
443 struct device *hwmon_dev;
444 enum chips type;
445 u16 features;
446 u8 peci_mask;
447 u8 old_peci_mask;
448
449 unsigned short addr;
450 const char *name;
451 struct mutex update_lock;
452 char valid; /* !=0 if following fields are valid */
453 unsigned long last_updated; /* In jiffies */
454
455 u16 in_scaled; /* Internal voltage sensors are scaled */
456 u8 in[10][3]; /* [nr][0]=in, [1]=min, [2]=max */
457 u8 has_fan; /* Bitfield, fans enabled */
458 u16 fan[6][2]; /* Register values, [nr][0]=fan, [1]=min */
459 u8 has_temp; /* Bitfield, temp sensors enabled */
460 s8 temp[3][4]; /* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */
461 u8 sensor; /* Register value (IT87_REG_TEMP_ENABLE) */
462 u8 extra; /* Register value (IT87_REG_TEMP_EXTRA) */
463 u8 fan_div[3]; /* Register encoding, shifted right */
464 u8 vid; /* Register encoding, combined */
465 u8 vrm;
466 u32 alarms; /* Register encoding, combined */
467 u8 beeps; /* Register encoding */
468 u8 fan_main_ctrl; /* Register value */
469 u8 fan_ctl; /* Register value */
470
471 /*
472 * The following 3 arrays correspond to the same registers up to
473 * the IT8720F. The meaning of bits 6-0 depends on the value of bit
474 * 7, and we want to preserve settings on mode changes, so we have
475 * to track all values separately.
476 * Starting with the IT8721F, the manual PWM duty cycles are stored
477 * in separate registers (8-bit values), so the separate tracking
478 * is no longer needed, but it is still done to keep the driver
479 * simple.
480 */
481 u8 pwm_ctrl[3]; /* Register value */
482 u8 pwm_duty[3]; /* Manual PWM value set by user */
483 u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */
484
485 /* Automatic fan speed control registers */
486 u8 auto_pwm[3][4]; /* [nr][3] is hard-coded */
487 s8 auto_temp[3][5]; /* [nr][0] is point1_temp_hyst */
488};
489
490static int adc_lsb(const struct it87_data *data, int nr)
491{
492 int lsb;
493
494 if (has_12mv_adc(data))
495 lsb = 120;
496 else if (has_10_9mv_adc(data))
497 lsb = 109;
498 else
499 lsb = 160;
500 if (data->in_scaled & (1 << nr))
501 lsb <<= 1;
502 return lsb;
503}
504
505static u8 in_to_reg(const struct it87_data *data, int nr, long val)
506{
507 val = DIV_ROUND_CLOSEST(val * 10, adc_lsb(data, nr));
508 return clamp_val(val, 0, 255);
509}
510
511static int in_from_reg(const struct it87_data *data, int nr, int val)
512{
513 return DIV_ROUND_CLOSEST(val * adc_lsb(data, nr), 10);
514}
515
516static inline u8 FAN_TO_REG(long rpm, int div)
517{
518 if (rpm == 0)
519 return 255;
520 rpm = clamp_val(rpm, 1, 1000000);
521 return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
522}
523
524static inline u16 FAN16_TO_REG(long rpm)
525{
526 if (rpm == 0)
527 return 0xffff;
528 return clamp_val((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
529}
530
531#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 255 ? 0 : \
532 1350000 / ((val) * (div)))
533/* The divider is fixed to 2 in 16-bit mode */
534#define FAN16_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
535 1350000 / ((val) * 2))
536
537#define TEMP_TO_REG(val) (clamp_val(((val) < 0 ? (((val) - 500) / 1000) : \
538 ((val) + 500) / 1000), -128, 127))
539#define TEMP_FROM_REG(val) ((val) * 1000)
540
541static u8 pwm_to_reg(const struct it87_data *data, long val)
542{
543 if (has_newer_autopwm(data))
544 return val;
545 else
546 return val >> 1;
547}
548
549static int pwm_from_reg(const struct it87_data *data, u8 reg)
550{
551 if (has_newer_autopwm(data))
552 return reg;
553 else
554 return (reg & 0x7f) << 1;
555}
556
557
558static int DIV_TO_REG(int val)
559{
560 int answer = 0;
561 while (answer < 7 && (val >>= 1))
562 answer++;
563 return answer;
564}
565#define DIV_FROM_REG(val) (1 << (val))
566
567/*
568 * PWM base frequencies. The frequency has to be divided by either 128 or 256,
569 * depending on the chip type, to calculate the actual PWM frequency.
570 *
571 * Some of the chip datasheets suggest a base frequency of 51 kHz instead
572 * of 750 kHz for the slowest base frequency, resulting in a PWM frequency
573 * of 200 Hz. Sometimes both PWM frequency select registers are affected,
574 * sometimes just one. It is unknown if this is a datasheet error or real,
575 * so this is ignored for now.
576 */
577static const unsigned int pwm_freq[8] = {
578 48000000,
579 24000000,
580 12000000,
581 8000000,
582 6000000,
583 3000000,
584 1500000,
585 750000,
586};
587
588static int it87_probe(struct platform_device *pdev);
589static int it87_remove(struct platform_device *pdev);
590
591static int it87_read_value(struct it87_data *data, u8 reg);
592static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
593static struct it87_data *it87_update_device(struct device *dev);
594static int it87_check_pwm(struct device *dev);
595static void it87_init_device(struct platform_device *pdev);
596
597
598static struct platform_driver it87_driver = {
599 .driver = {
600 .name = DRVNAME,
601 },
602 .probe = it87_probe,
603 .remove = it87_remove,
604};
605
606static ssize_t show_in(struct device *dev, struct device_attribute *attr,
607 char *buf)
608{
609 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
610 int nr = sattr->nr;
611 int index = sattr->index;
612
613 struct it87_data *data = it87_update_device(dev);
614 return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr][index]));
615}
616
617static ssize_t set_in(struct device *dev, struct device_attribute *attr,
618 const char *buf, size_t count)
619{
620 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
621 int nr = sattr->nr;
622 int index = sattr->index;
623
624 struct it87_data *data = dev_get_drvdata(dev);
625 unsigned long val;
626
627 if (kstrtoul(buf, 10, &val) < 0)
628 return -EINVAL;
629
630 mutex_lock(&data->update_lock);
631 data->in[nr][index] = in_to_reg(data, nr, val);
632 it87_write_value(data,
633 index == 1 ? IT87_REG_VIN_MIN(nr)
634 : IT87_REG_VIN_MAX(nr),
635 data->in[nr][index]);
636 mutex_unlock(&data->update_lock);
637 return count;
638}
639
640static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0);
641static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in,
642 0, 1);
643static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in,
644 0, 2);
645
646static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, 0);
647static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in,
648 1, 1);
649static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in,
650 1, 2);
651
652static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, 0);
653static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in,
654 2, 1);
655static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in,
656 2, 2);
657
658static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, 0);
659static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in,
660 3, 1);
661static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in,
662 3, 2);
663
664static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, 0);
665static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in,
666 4, 1);
667static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in,
668 4, 2);
669
670static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, 0);
671static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in,
672 5, 1);
673static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in,
674 5, 2);
675
676static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 6, 0);
677static SENSOR_DEVICE_ATTR_2(in6_min, S_IRUGO | S_IWUSR, show_in, set_in,
678 6, 1);
679static SENSOR_DEVICE_ATTR_2(in6_max, S_IRUGO | S_IWUSR, show_in, set_in,
680 6, 2);
681
682static SENSOR_DEVICE_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 7, 0);
683static SENSOR_DEVICE_ATTR_2(in7_min, S_IRUGO | S_IWUSR, show_in, set_in,
684 7, 1);
685static SENSOR_DEVICE_ATTR_2(in7_max, S_IRUGO | S_IWUSR, show_in, set_in,
686 7, 2);
687
688static SENSOR_DEVICE_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 8, 0);
689static SENSOR_DEVICE_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 9, 0);
690
691/* 3 temperatures */
692static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
693 char *buf)
694{
695 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
696 int nr = sattr->nr;
697 int index = sattr->index;
698 struct it87_data *data = it87_update_device(dev);
699
700 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr][index]));
701}
702
703static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
704 const char *buf, size_t count)
705{
706 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
707 int nr = sattr->nr;
708 int index = sattr->index;
709 struct it87_data *data = dev_get_drvdata(dev);
710 long val;
711 u8 reg, regval;
712
713 if (kstrtol(buf, 10, &val) < 0)
714 return -EINVAL;
715
716 mutex_lock(&data->update_lock);
717
718 switch (index) {
719 default:
720 case 1:
721 reg = IT87_REG_TEMP_LOW(nr);
722 break;
723 case 2:
724 reg = IT87_REG_TEMP_HIGH(nr);
725 break;
726 case 3:
727 regval = it87_read_value(data, IT87_REG_BEEP_ENABLE);
728 if (!(regval & 0x80)) {
729 regval |= 0x80;
730 it87_write_value(data, IT87_REG_BEEP_ENABLE, regval);
731 }
732 data->valid = 0;
733 reg = IT87_REG_TEMP_OFFSET[nr];
734 break;
735 }
736
737 data->temp[nr][index] = TEMP_TO_REG(val);
738 it87_write_value(data, reg, data->temp[nr][index]);
739 mutex_unlock(&data->update_lock);
740 return count;
741}
742
743static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
744static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
745 0, 1);
746static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
747 0, 2);
748static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
749 set_temp, 0, 3);
750static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0);
751static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
752 1, 1);
753static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
754 1, 2);
755static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
756 set_temp, 1, 3);
757static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, 0);
758static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
759 2, 1);
760static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
761 2, 2);
762static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
763 set_temp, 2, 3);
764
765static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr,
766 char *buf)
767{
768 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
769 int nr = sensor_attr->index;
770 struct it87_data *data = it87_update_device(dev);
771 u8 reg = data->sensor; /* In case value is updated while used */
772 u8 extra = data->extra;
773
774 if ((has_temp_peci(data, nr) && (reg >> 6 == nr + 1))
775 || (has_temp_old_peci(data, nr) && (extra & 0x80)))
776 return sprintf(buf, "6\n"); /* Intel PECI */
777 if (reg & (1 << nr))
778 return sprintf(buf, "3\n"); /* thermal diode */
779 if (reg & (8 << nr))
780 return sprintf(buf, "4\n"); /* thermistor */
781 return sprintf(buf, "0\n"); /* disabled */
782}
783
784static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr,
785 const char *buf, size_t count)
786{
787 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
788 int nr = sensor_attr->index;
789
790 struct it87_data *data = dev_get_drvdata(dev);
791 long val;
792 u8 reg, extra;
793
794 if (kstrtol(buf, 10, &val) < 0)
795 return -EINVAL;
796
797 reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
798 reg &= ~(1 << nr);
799 reg &= ~(8 << nr);
800 if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1 || val == 6))
801 reg &= 0x3f;
802 extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
803 if (has_temp_old_peci(data, nr) && ((extra & 0x80) || val == 6))
804 extra &= 0x7f;
805 if (val == 2) { /* backwards compatibility */
806 dev_warn(dev,
807 "Sensor type 2 is deprecated, please use 4 instead\n");
808 val = 4;
809 }
810 /* 3 = thermal diode; 4 = thermistor; 6 = Intel PECI; 0 = disabled */
811 if (val == 3)
812 reg |= 1 << nr;
813 else if (val == 4)
814 reg |= 8 << nr;
815 else if (has_temp_peci(data, nr) && val == 6)
816 reg |= (nr + 1) << 6;
817 else if (has_temp_old_peci(data, nr) && val == 6)
818 extra |= 0x80;
819 else if (val != 0)
820 return -EINVAL;
821
822 mutex_lock(&data->update_lock);
823 data->sensor = reg;
824 data->extra = extra;
825 it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
826 if (has_temp_old_peci(data, nr))
827 it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra);
828 data->valid = 0; /* Force cache refresh */
829 mutex_unlock(&data->update_lock);
830 return count;
831}
832
833static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR, show_temp_type,
834 set_temp_type, 0);
835static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type,
836 set_temp_type, 1);
837static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type,
838 set_temp_type, 2);
839
840/* 3 Fans */
841
842static int pwm_mode(const struct it87_data *data, int nr)
843{
844 int ctrl = data->fan_main_ctrl & (1 << nr);
845
846 if (ctrl == 0 && data->type != it8603) /* Full speed */
847 return 0;
848 if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
849 return 2;
850 else /* Manual mode */
851 return 1;
852}
853
854static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
855 char *buf)
856{
857 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
858 int nr = sattr->nr;
859 int index = sattr->index;
860 int speed;
861 struct it87_data *data = it87_update_device(dev);
862
863 speed = has_16bit_fans(data) ?
864 FAN16_FROM_REG(data->fan[nr][index]) :
865 FAN_FROM_REG(data->fan[nr][index],
866 DIV_FROM_REG(data->fan_div[nr]));
867 return sprintf(buf, "%d\n", speed);
868}
869
870static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
871 char *buf)
872{
873 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
874 int nr = sensor_attr->index;
875
876 struct it87_data *data = it87_update_device(dev);
877 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
878}
879static ssize_t show_pwm_enable(struct device *dev,
880 struct device_attribute *attr, char *buf)
881{
882 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
883 int nr = sensor_attr->index;
884
885 struct it87_data *data = it87_update_device(dev);
886 return sprintf(buf, "%d\n", pwm_mode(data, nr));
887}
888static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
889 char *buf)
890{
891 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
892 int nr = sensor_attr->index;
893
894 struct it87_data *data = it87_update_device(dev);
895 return sprintf(buf, "%d\n",
896 pwm_from_reg(data, data->pwm_duty[nr]));
897}
898static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
899 char *buf)
900{
901 struct it87_data *data = it87_update_device(dev);
902 int index = (data->fan_ctl >> 4) & 0x07;
903 unsigned int freq;
904
905 freq = pwm_freq[index] / (has_newer_autopwm(data) ? 256 : 128);
906
907 return sprintf(buf, "%u\n", freq);
908}
909
910static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
911 const char *buf, size_t count)
912{
913 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
914 int nr = sattr->nr;
915 int index = sattr->index;
916
917 struct it87_data *data = dev_get_drvdata(dev);
918 long val;
919 u8 reg;
920
921 if (kstrtol(buf, 10, &val) < 0)
922 return -EINVAL;
923
924 mutex_lock(&data->update_lock);
925
926 if (has_16bit_fans(data)) {
927 data->fan[nr][index] = FAN16_TO_REG(val);
928 it87_write_value(data, IT87_REG_FAN_MIN[nr],
929 data->fan[nr][index] & 0xff);
930 it87_write_value(data, IT87_REG_FANX_MIN[nr],
931 data->fan[nr][index] >> 8);
932 } else {
933 reg = it87_read_value(data, IT87_REG_FAN_DIV);
934 switch (nr) {
935 case 0:
936 data->fan_div[nr] = reg & 0x07;
937 break;
938 case 1:
939 data->fan_div[nr] = (reg >> 3) & 0x07;
940 break;
941 case 2:
942 data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
943 break;
944 }
945 data->fan[nr][index] =
946 FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
947 it87_write_value(data, IT87_REG_FAN_MIN[nr],
948 data->fan[nr][index]);
949 }
950
951 mutex_unlock(&data->update_lock);
952 return count;
953}
954
955static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
956 const char *buf, size_t count)
957{
958 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
959 int nr = sensor_attr->index;
960
961 struct it87_data *data = dev_get_drvdata(dev);
962 unsigned long val;
963 int min;
964 u8 old;
965
966 if (kstrtoul(buf, 10, &val) < 0)
967 return -EINVAL;
968
969 mutex_lock(&data->update_lock);
970 old = it87_read_value(data, IT87_REG_FAN_DIV);
971
972 /* Save fan min limit */
973 min = FAN_FROM_REG(data->fan[nr][1], DIV_FROM_REG(data->fan_div[nr]));
974
975 switch (nr) {
976 case 0:
977 case 1:
978 data->fan_div[nr] = DIV_TO_REG(val);
979 break;
980 case 2:
981 if (val < 8)
982 data->fan_div[nr] = 1;
983 else
984 data->fan_div[nr] = 3;
985 }
986 val = old & 0x80;
987 val |= (data->fan_div[0] & 0x07);
988 val |= (data->fan_div[1] & 0x07) << 3;
989 if (data->fan_div[2] == 3)
990 val |= 0x1 << 6;
991 it87_write_value(data, IT87_REG_FAN_DIV, val);
992
993 /* Restore fan min limit */
994 data->fan[nr][1] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
995 it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan[nr][1]);
996
997 mutex_unlock(&data->update_lock);
998 return count;
999}
1000
1001/* Returns 0 if OK, -EINVAL otherwise */
1002static int check_trip_points(struct device *dev, int nr)
1003{
1004 const struct it87_data *data = dev_get_drvdata(dev);
1005 int i, err = 0;
1006
1007 if (has_old_autopwm(data)) {
1008 for (i = 0; i < 3; i++) {
1009 if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
1010 err = -EINVAL;
1011 }
1012 for (i = 0; i < 2; i++) {
1013 if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
1014 err = -EINVAL;
1015 }
1016 }
1017
1018 if (err) {
1019 dev_err(dev,
1020 "Inconsistent trip points, not switching to automatic mode\n");
1021 dev_err(dev, "Adjust the trip points and try again\n");
1022 }
1023 return err;
1024}
1025
1026static ssize_t set_pwm_enable(struct device *dev,
1027 struct device_attribute *attr, const char *buf, size_t count)
1028{
1029 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1030 int nr = sensor_attr->index;
1031
1032 struct it87_data *data = dev_get_drvdata(dev);
1033 long val;
1034
1035 if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 2)
1036 return -EINVAL;
1037
1038 /* Check trip points before switching to automatic mode */
1039 if (val == 2) {
1040 if (check_trip_points(dev, nr) < 0)
1041 return -EINVAL;
1042 }
1043
1044 /* IT8603E does not have on/off mode */
1045 if (val == 0 && data->type == it8603)
1046 return -EINVAL;
1047
1048 mutex_lock(&data->update_lock);
1049
1050 if (val == 0) {
1051 int tmp;
1052 /* make sure the fan is on when in on/off mode */
1053 tmp = it87_read_value(data, IT87_REG_FAN_CTL);
1054 it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr));
1055 /* set on/off mode */
1056 data->fan_main_ctrl &= ~(1 << nr);
1057 it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
1058 data->fan_main_ctrl);
1059 } else {
1060 if (val == 1) /* Manual mode */
1061 data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
1062 data->pwm_temp_map[nr] :
1063 data->pwm_duty[nr];
1064 else /* Automatic mode */
1065 data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
1066 it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
1067
1068 if (data->type != it8603) {
1069 /* set SmartGuardian mode */
1070 data->fan_main_ctrl |= (1 << nr);
1071 it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
1072 data->fan_main_ctrl);
1073 }
1074 }
1075
1076 mutex_unlock(&data->update_lock);
1077 return count;
1078}
1079static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
1080 const char *buf, size_t count)
1081{
1082 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1083 int nr = sensor_attr->index;
1084
1085 struct it87_data *data = dev_get_drvdata(dev);
1086 long val;
1087
1088 if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
1089 return -EINVAL;
1090
1091 mutex_lock(&data->update_lock);
1092 if (has_newer_autopwm(data)) {
1093 /*
1094 * If we are in automatic mode, the PWM duty cycle register
1095 * is read-only so we can't write the value.
1096 */
1097 if (data->pwm_ctrl[nr] & 0x80) {
1098 mutex_unlock(&data->update_lock);
1099 return -EBUSY;
1100 }
1101 data->pwm_duty[nr] = pwm_to_reg(data, val);
1102 it87_write_value(data, IT87_REG_PWM_DUTY(nr),
1103 data->pwm_duty[nr]);
1104 } else {
1105 data->pwm_duty[nr] = pwm_to_reg(data, val);
1106 /*
1107 * If we are in manual mode, write the duty cycle immediately;
1108 * otherwise, just store it for later use.
1109 */
1110 if (!(data->pwm_ctrl[nr] & 0x80)) {
1111 data->pwm_ctrl[nr] = data->pwm_duty[nr];
1112 it87_write_value(data, IT87_REG_PWM(nr),
1113 data->pwm_ctrl[nr]);
1114 }
1115 }
1116 mutex_unlock(&data->update_lock);
1117 return count;
1118}
1119static ssize_t set_pwm_freq(struct device *dev,
1120 struct device_attribute *attr, const char *buf, size_t count)
1121{
1122 struct it87_data *data = dev_get_drvdata(dev);
1123 unsigned long val;
1124 int i;
1125
1126 if (kstrtoul(buf, 10, &val) < 0)
1127 return -EINVAL;
1128
1129 val = clamp_val(val, 0, 1000000);
1130 val *= has_newer_autopwm(data) ? 256 : 128;
1131
1132 /* Search for the nearest available frequency */
1133 for (i = 0; i < 7; i++) {
1134 if (val > (pwm_freq[i] + pwm_freq[i+1]) / 2)
1135 break;
1136 }
1137
1138 mutex_lock(&data->update_lock);
1139 data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
1140 data->fan_ctl |= i << 4;
1141 it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
1142 mutex_unlock(&data->update_lock);
1143
1144 return count;
1145}
1146static ssize_t show_pwm_temp_map(struct device *dev,
1147 struct device_attribute *attr, char *buf)
1148{
1149 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1150 int nr = sensor_attr->index;
1151
1152 struct it87_data *data = it87_update_device(dev);
1153 int map;
1154
1155 if (data->pwm_temp_map[nr] < 3)
1156 map = 1 << data->pwm_temp_map[nr];
1157 else
1158 map = 0; /* Should never happen */
1159 return sprintf(buf, "%d\n", map);
1160}
1161static ssize_t set_pwm_temp_map(struct device *dev,
1162 struct device_attribute *attr, const char *buf, size_t count)
1163{
1164 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
1165 int nr = sensor_attr->index;
1166
1167 struct it87_data *data = dev_get_drvdata(dev);
1168 long val;
1169 u8 reg;
1170
1171 /*
1172 * This check can go away if we ever support automatic fan speed
1173 * control on newer chips.
1174 */
1175 if (!has_old_autopwm(data)) {
1176 dev_notice(dev, "Mapping change disabled for safety reasons\n");
1177 return -EINVAL;
1178 }
1179
1180 if (kstrtol(buf, 10, &val) < 0)
1181 return -EINVAL;
1182
1183 switch (val) {
1184 case (1 << 0):
1185 reg = 0x00;
1186 break;
1187 case (1 << 1):
1188 reg = 0x01;
1189 break;
1190 case (1 << 2):
1191 reg = 0x02;
1192 break;
1193 default:
1194 return -EINVAL;
1195 }
1196
1197 mutex_lock(&data->update_lock);
1198 data->pwm_temp_map[nr] = reg;
1199 /*
1200 * If we are in automatic mode, write the temp mapping immediately;
1201 * otherwise, just store it for later use.
1202 */
1203 if (data->pwm_ctrl[nr] & 0x80) {
1204 data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
1205 it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
1206 }
1207 mutex_unlock(&data->update_lock);
1208 return count;
1209}
1210
1211static ssize_t show_auto_pwm(struct device *dev,
1212 struct device_attribute *attr, char *buf)
1213{
1214 struct it87_data *data = it87_update_device(dev);
1215 struct sensor_device_attribute_2 *sensor_attr =
1216 to_sensor_dev_attr_2(attr);
1217 int nr = sensor_attr->nr;
1218 int point = sensor_attr->index;
1219
1220 return sprintf(buf, "%d\n",
1221 pwm_from_reg(data, data->auto_pwm[nr][point]));
1222}
1223
1224static ssize_t set_auto_pwm(struct device *dev,
1225 struct device_attribute *attr, const char *buf, size_t count)
1226{
1227 struct it87_data *data = dev_get_drvdata(dev);
1228 struct sensor_device_attribute_2 *sensor_attr =
1229 to_sensor_dev_attr_2(attr);
1230 int nr = sensor_attr->nr;
1231 int point = sensor_attr->index;
1232 long val;
1233
1234 if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
1235 return -EINVAL;
1236
1237 mutex_lock(&data->update_lock);
1238 data->auto_pwm[nr][point] = pwm_to_reg(data, val);
1239 it87_write_value(data, IT87_REG_AUTO_PWM(nr, point),
1240 data->auto_pwm[nr][point]);
1241 mutex_unlock(&data->update_lock);
1242 return count;
1243}
1244
1245static ssize_t show_auto_temp(struct device *dev,
1246 struct device_attribute *attr, char *buf)
1247{
1248 struct it87_data *data = it87_update_device(dev);
1249 struct sensor_device_attribute_2 *sensor_attr =
1250 to_sensor_dev_attr_2(attr);
1251 int nr = sensor_attr->nr;
1252 int point = sensor_attr->index;
1253
1254 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->auto_temp[nr][point]));
1255}
1256
1257static ssize_t set_auto_temp(struct device *dev,
1258 struct device_attribute *attr, const char *buf, size_t count)
1259{
1260 struct it87_data *data = dev_get_drvdata(dev);
1261 struct sensor_device_attribute_2 *sensor_attr =
1262 to_sensor_dev_attr_2(attr);
1263 int nr = sensor_attr->nr;
1264 int point = sensor_attr->index;
1265 long val;
1266
1267 if (kstrtol(buf, 10, &val) < 0 || val < -128000 || val > 127000)
1268 return -EINVAL;
1269
1270 mutex_lock(&data->update_lock);
1271 data->auto_temp[nr][point] = TEMP_TO_REG(val);
1272 it87_write_value(data, IT87_REG_AUTO_TEMP(nr, point),
1273 data->auto_temp[nr][point]);
1274 mutex_unlock(&data->update_lock);
1275 return count;
1276}
1277
1278static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0);
1279static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1280 0, 1);
1281static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div,
1282 set_fan_div, 0);
1283
1284static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, 0);
1285static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1286 1, 1);
1287static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, show_fan_div,
1288 set_fan_div, 1);
1289
1290static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, 0);
1291static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1292 2, 1);
1293static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR, show_fan_div,
1294 set_fan_div, 2);
1295
1296static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, 0);
1297static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1298 3, 1);
1299
1300static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, 0);
1301static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1302 4, 1);
1303
1304static SENSOR_DEVICE_ATTR_2(fan6_input, S_IRUGO, show_fan, NULL, 5, 0);
1305static SENSOR_DEVICE_ATTR_2(fan6_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1306 5, 1);
1307
1308static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
1309 show_pwm_enable, set_pwm_enable, 0);
1310static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0);
1311static DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR, show_pwm_freq, set_pwm_freq);
1312static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR,
1313 show_pwm_temp_map, set_pwm_temp_map, 0);
1314static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR,
1315 show_auto_pwm, set_auto_pwm, 0, 0);
1316static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR,
1317 show_auto_pwm, set_auto_pwm, 0, 1);
1318static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO | S_IWUSR,
1319 show_auto_pwm, set_auto_pwm, 0, 2);
1320static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO,
1321 show_auto_pwm, NULL, 0, 3);
1322static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR,
1323 show_auto_temp, set_auto_temp, 0, 1);
1324static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
1325 show_auto_temp, set_auto_temp, 0, 0);
1326static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR,
1327 show_auto_temp, set_auto_temp, 0, 2);
1328static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR,
1329 show_auto_temp, set_auto_temp, 0, 3);
1330static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_temp, S_IRUGO | S_IWUSR,
1331 show_auto_temp, set_auto_temp, 0, 4);
1332
1333static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
1334 show_pwm_enable, set_pwm_enable, 1);
1335static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1);
1336static DEVICE_ATTR(pwm2_freq, S_IRUGO, show_pwm_freq, NULL);
1337static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR,
1338 show_pwm_temp_map, set_pwm_temp_map, 1);
1339static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR,
1340 show_auto_pwm, set_auto_pwm, 1, 0);
1341static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR,
1342 show_auto_pwm, set_auto_pwm, 1, 1);
1343static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO | S_IWUSR,
1344 show_auto_pwm, set_auto_pwm, 1, 2);
1345static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO,
1346 show_auto_pwm, NULL, 1, 3);
1347static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR,
1348 show_auto_temp, set_auto_temp, 1, 1);
1349static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
1350 show_auto_temp, set_auto_temp, 1, 0);
1351static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR,
1352 show_auto_temp, set_auto_temp, 1, 2);
1353static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR,
1354 show_auto_temp, set_auto_temp, 1, 3);
1355static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_temp, S_IRUGO | S_IWUSR,
1356 show_auto_temp, set_auto_temp, 1, 4);
1357
1358static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
1359 show_pwm_enable, set_pwm_enable, 2);
1360static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 2);
1361static DEVICE_ATTR(pwm3_freq, S_IRUGO, show_pwm_freq, NULL);
1362static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR,
1363 show_pwm_temp_map, set_pwm_temp_map, 2);
1364static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR,
1365 show_auto_pwm, set_auto_pwm, 2, 0);
1366static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR,
1367 show_auto_pwm, set_auto_pwm, 2, 1);
1368static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO | S_IWUSR,
1369 show_auto_pwm, set_auto_pwm, 2, 2);
1370static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO,
1371 show_auto_pwm, NULL, 2, 3);
1372static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR,
1373 show_auto_temp, set_auto_temp, 2, 1);
1374static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
1375 show_auto_temp, set_auto_temp, 2, 0);
1376static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR,
1377 show_auto_temp, set_auto_temp, 2, 2);
1378static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR,
1379 show_auto_temp, set_auto_temp, 2, 3);
1380static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_temp, S_IRUGO | S_IWUSR,
1381 show_auto_temp, set_auto_temp, 2, 4);
1382
1383/* Alarms */
1384static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
1385 char *buf)
1386{
1387 struct it87_data *data = it87_update_device(dev);
1388 return sprintf(buf, "%u\n", data->alarms);
1389}
1390static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
1391
1392static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
1393 char *buf)
1394{
1395 int bitnr = to_sensor_dev_attr(attr)->index;
1396 struct it87_data *data = it87_update_device(dev);
1397 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
1398}
1399
1400static ssize_t clear_intrusion(struct device *dev, struct device_attribute
1401 *attr, const char *buf, size_t count)
1402{
1403 struct it87_data *data = dev_get_drvdata(dev);
1404 long val;
1405 int config;
1406
1407 if (kstrtol(buf, 10, &val) < 0 || val != 0)
1408 return -EINVAL;
1409
1410 mutex_lock(&data->update_lock);
1411 config = it87_read_value(data, IT87_REG_CONFIG);
1412 if (config < 0) {
1413 count = config;
1414 } else {
1415 config |= 1 << 5;
1416 it87_write_value(data, IT87_REG_CONFIG, config);
1417 /* Invalidate cache to force re-read */
1418 data->valid = 0;
1419 }
1420 mutex_unlock(&data->update_lock);
1421
1422 return count;
1423}
1424
1425static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
1426static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
1427static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
1428static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
1429static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
1430static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
1431static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
1432static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
1433static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
1434static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
1435static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
1436static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
1437static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
1438static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 7);
1439static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
1440static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
1441static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
1442static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
1443 show_alarm, clear_intrusion, 4);
1444
1445static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
1446 char *buf)
1447{
1448 int bitnr = to_sensor_dev_attr(attr)->index;
1449 struct it87_data *data = it87_update_device(dev);
1450 return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
1451}
1452static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
1453 const char *buf, size_t count)
1454{
1455 int bitnr = to_sensor_dev_attr(attr)->index;
1456 struct it87_data *data = dev_get_drvdata(dev);
1457 long val;
1458
1459 if (kstrtol(buf, 10, &val) < 0
1460 || (val != 0 && val != 1))
1461 return -EINVAL;
1462
1463 mutex_lock(&data->update_lock);
1464 data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
1465 if (val)
1466 data->beeps |= (1 << bitnr);
1467 else
1468 data->beeps &= ~(1 << bitnr);
1469 it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
1470 mutex_unlock(&data->update_lock);
1471 return count;
1472}
1473
1474static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
1475 show_beep, set_beep, 1);
1476static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
1477static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
1478static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
1479static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
1480static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
1481static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
1482static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
1483/* fanX_beep writability is set later */
1484static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
1485static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
1486static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
1487static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
1488static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
1489static SENSOR_DEVICE_ATTR(fan6_beep, S_IRUGO, show_beep, set_beep, 0);
1490static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
1491 show_beep, set_beep, 2);
1492static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
1493static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
1494
1495static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
1496 char *buf)
1497{
1498 struct it87_data *data = dev_get_drvdata(dev);
1499 return sprintf(buf, "%u\n", data->vrm);
1500}
1501static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
1502 const char *buf, size_t count)
1503{
1504 struct it87_data *data = dev_get_drvdata(dev);
1505 unsigned long val;
1506
1507 if (kstrtoul(buf, 10, &val) < 0)
1508 return -EINVAL;
1509
1510 data->vrm = val;
1511
1512 return count;
1513}
1514static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
1515
1516static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
1517 char *buf)
1518{
1519 struct it87_data *data = it87_update_device(dev);
1520 return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
1521}
1522static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
1523
1524static ssize_t show_label(struct device *dev, struct device_attribute *attr,
1525 char *buf)
1526{
1527 static const char * const labels[] = {
1528 "+5V",
1529 "5VSB",
1530 "Vbat",
1531 };
1532 static const char * const labels_it8721[] = {
1533 "+3.3V",
1534 "3VSB",
1535 "Vbat",
1536 };
1537 struct it87_data *data = dev_get_drvdata(dev);
1538 int nr = to_sensor_dev_attr(attr)->index;
1539 const char *label;
1540
1541 if (has_12mv_adc(data) || has_10_9mv_adc(data))
1542 label = labels_it8721[nr];
1543 else
1544 label = labels[nr];
1545
1546 return sprintf(buf, "%s\n", label);
1547}
1548static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
1549static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
1550static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2);
1551/* special AVCC3 IT8603E in9 */
1552static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 0);
1553
1554static ssize_t show_name(struct device *dev, struct device_attribute
1555 *devattr, char *buf)
1556{
1557 struct it87_data *data = dev_get_drvdata(dev);
1558 return sprintf(buf, "%s\n", data->name);
1559}
1560static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1561
1562static struct attribute *it87_attributes_in[10][5] = {
1563{
1564 &sensor_dev_attr_in0_input.dev_attr.attr,
1565 &sensor_dev_attr_in0_min.dev_attr.attr,
1566 &sensor_dev_attr_in0_max.dev_attr.attr,
1567 &sensor_dev_attr_in0_alarm.dev_attr.attr,
1568 NULL
1569}, {
1570 &sensor_dev_attr_in1_input.dev_attr.attr,
1571 &sensor_dev_attr_in1_min.dev_attr.attr,
1572 &sensor_dev_attr_in1_max.dev_attr.attr,
1573 &sensor_dev_attr_in1_alarm.dev_attr.attr,
1574 NULL
1575}, {
1576 &sensor_dev_attr_in2_input.dev_attr.attr,
1577 &sensor_dev_attr_in2_min.dev_attr.attr,
1578 &sensor_dev_attr_in2_max.dev_attr.attr,
1579 &sensor_dev_attr_in2_alarm.dev_attr.attr,
1580 NULL
1581}, {
1582 &sensor_dev_attr_in3_input.dev_attr.attr,
1583 &sensor_dev_attr_in3_min.dev_attr.attr,
1584 &sensor_dev_attr_in3_max.dev_attr.attr,
1585 &sensor_dev_attr_in3_alarm.dev_attr.attr,
1586 NULL
1587}, {
1588 &sensor_dev_attr_in4_input.dev_attr.attr,
1589 &sensor_dev_attr_in4_min.dev_attr.attr,
1590 &sensor_dev_attr_in4_max.dev_attr.attr,
1591 &sensor_dev_attr_in4_alarm.dev_attr.attr,
1592 NULL
1593}, {
1594 &sensor_dev_attr_in5_input.dev_attr.attr,
1595 &sensor_dev_attr_in5_min.dev_attr.attr,
1596 &sensor_dev_attr_in5_max.dev_attr.attr,
1597 &sensor_dev_attr_in5_alarm.dev_attr.attr,
1598 NULL
1599}, {
1600 &sensor_dev_attr_in6_input.dev_attr.attr,
1601 &sensor_dev_attr_in6_min.dev_attr.attr,
1602 &sensor_dev_attr_in6_max.dev_attr.attr,
1603 &sensor_dev_attr_in6_alarm.dev_attr.attr,
1604 NULL
1605}, {
1606 &sensor_dev_attr_in7_input.dev_attr.attr,
1607 &sensor_dev_attr_in7_min.dev_attr.attr,
1608 &sensor_dev_attr_in7_max.dev_attr.attr,
1609 &sensor_dev_attr_in7_alarm.dev_attr.attr,
1610 NULL
1611}, {
1612 &sensor_dev_attr_in8_input.dev_attr.attr,
1613 NULL
1614}, {
1615 &sensor_dev_attr_in9_input.dev_attr.attr,
1616 NULL
1617} };
1618
1619static const struct attribute_group it87_group_in[10] = {
1620 { .attrs = it87_attributes_in[0] },
1621 { .attrs = it87_attributes_in[1] },
1622 { .attrs = it87_attributes_in[2] },
1623 { .attrs = it87_attributes_in[3] },
1624 { .attrs = it87_attributes_in[4] },
1625 { .attrs = it87_attributes_in[5] },
1626 { .attrs = it87_attributes_in[6] },
1627 { .attrs = it87_attributes_in[7] },
1628 { .attrs = it87_attributes_in[8] },
1629 { .attrs = it87_attributes_in[9] },
1630};
1631
1632static struct attribute *it87_attributes_temp[3][6] = {
1633{
1634 &sensor_dev_attr_temp1_input.dev_attr.attr,
1635 &sensor_dev_attr_temp1_max.dev_attr.attr,
1636 &sensor_dev_attr_temp1_min.dev_attr.attr,
1637 &sensor_dev_attr_temp1_type.dev_attr.attr,
1638 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1639 NULL
1640} , {
1641 &sensor_dev_attr_temp2_input.dev_attr.attr,
1642 &sensor_dev_attr_temp2_max.dev_attr.attr,
1643 &sensor_dev_attr_temp2_min.dev_attr.attr,
1644 &sensor_dev_attr_temp2_type.dev_attr.attr,
1645 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1646 NULL
1647} , {
1648 &sensor_dev_attr_temp3_input.dev_attr.attr,
1649 &sensor_dev_attr_temp3_max.dev_attr.attr,
1650 &sensor_dev_attr_temp3_min.dev_attr.attr,
1651 &sensor_dev_attr_temp3_type.dev_attr.attr,
1652 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1653 NULL
1654} };
1655
1656static const struct attribute_group it87_group_temp[3] = {
1657 { .attrs = it87_attributes_temp[0] },
1658 { .attrs = it87_attributes_temp[1] },
1659 { .attrs = it87_attributes_temp[2] },
1660};
1661
1662static struct attribute *it87_attributes_temp_offset[] = {
1663 &sensor_dev_attr_temp1_offset.dev_attr.attr,
1664 &sensor_dev_attr_temp2_offset.dev_attr.attr,
1665 &sensor_dev_attr_temp3_offset.dev_attr.attr,
1666};
1667
1668static struct attribute *it87_attributes[] = {
1669 &dev_attr_alarms.attr,
1670 &sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
1671 &dev_attr_name.attr,
1672 NULL
1673};
1674
1675static const struct attribute_group it87_group = {
1676 .attrs = it87_attributes,
1677};
1678
1679static struct attribute *it87_attributes_in_beep[] = {
1680 &sensor_dev_attr_in0_beep.dev_attr.attr,
1681 &sensor_dev_attr_in1_beep.dev_attr.attr,
1682 &sensor_dev_attr_in2_beep.dev_attr.attr,
1683 &sensor_dev_attr_in3_beep.dev_attr.attr,
1684 &sensor_dev_attr_in4_beep.dev_attr.attr,
1685 &sensor_dev_attr_in5_beep.dev_attr.attr,
1686 &sensor_dev_attr_in6_beep.dev_attr.attr,
1687 &sensor_dev_attr_in7_beep.dev_attr.attr,
1688 NULL,
1689 NULL,
1690};
1691
1692static struct attribute *it87_attributes_temp_beep[] = {
1693 &sensor_dev_attr_temp1_beep.dev_attr.attr,
1694 &sensor_dev_attr_temp2_beep.dev_attr.attr,
1695 &sensor_dev_attr_temp3_beep.dev_attr.attr,
1696};
1697
1698static struct attribute *it87_attributes_fan[6][3+1] = { {
1699 &sensor_dev_attr_fan1_input.dev_attr.attr,
1700 &sensor_dev_attr_fan1_min.dev_attr.attr,
1701 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1702 NULL
1703}, {
1704 &sensor_dev_attr_fan2_input.dev_attr.attr,
1705 &sensor_dev_attr_fan2_min.dev_attr.attr,
1706 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1707 NULL
1708}, {
1709 &sensor_dev_attr_fan3_input.dev_attr.attr,
1710 &sensor_dev_attr_fan3_min.dev_attr.attr,
1711 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1712 NULL
1713}, {
1714 &sensor_dev_attr_fan4_input.dev_attr.attr,
1715 &sensor_dev_attr_fan4_min.dev_attr.attr,
1716 &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1717 NULL
1718}, {
1719 &sensor_dev_attr_fan5_input.dev_attr.attr,
1720 &sensor_dev_attr_fan5_min.dev_attr.attr,
1721 &sensor_dev_attr_fan5_alarm.dev_attr.attr,
1722 NULL
1723}, {
1724 &sensor_dev_attr_fan6_input.dev_attr.attr,
1725 &sensor_dev_attr_fan6_min.dev_attr.attr,
1726 &sensor_dev_attr_fan6_alarm.dev_attr.attr,
1727 NULL
1728} };
1729
1730static const struct attribute_group it87_group_fan[6] = {
1731 { .attrs = it87_attributes_fan[0] },
1732 { .attrs = it87_attributes_fan[1] },
1733 { .attrs = it87_attributes_fan[2] },
1734 { .attrs = it87_attributes_fan[3] },
1735 { .attrs = it87_attributes_fan[4] },
1736 { .attrs = it87_attributes_fan[5] },
1737};
1738
1739static const struct attribute *it87_attributes_fan_div[] = {
1740 &sensor_dev_attr_fan1_div.dev_attr.attr,
1741 &sensor_dev_attr_fan2_div.dev_attr.attr,
1742 &sensor_dev_attr_fan3_div.dev_attr.attr,
1743};
1744
1745static struct attribute *it87_attributes_pwm[3][4+1] = { {
1746 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1747 &sensor_dev_attr_pwm1.dev_attr.attr,
1748 &dev_attr_pwm1_freq.attr,
1749 &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
1750 NULL
1751}, {
1752 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1753 &sensor_dev_attr_pwm2.dev_attr.attr,
1754 &dev_attr_pwm2_freq.attr,
1755 &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
1756 NULL
1757}, {
1758 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1759 &sensor_dev_attr_pwm3.dev_attr.attr,
1760 &dev_attr_pwm3_freq.attr,
1761 &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
1762 NULL
1763} };
1764
1765static const struct attribute_group it87_group_pwm[3] = {
1766 { .attrs = it87_attributes_pwm[0] },
1767 { .attrs = it87_attributes_pwm[1] },
1768 { .attrs = it87_attributes_pwm[2] },
1769};
1770
1771static struct attribute *it87_attributes_autopwm[3][9+1] = { {
1772 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
1773 &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
1774 &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
1775 &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
1776 &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
1777 &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
1778 &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
1779 &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
1780 &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
1781 NULL
1782}, {
1783 &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
1784 &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
1785 &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
1786 &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
1787 &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
1788 &sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr,
1789 &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
1790 &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
1791 &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
1792 NULL
1793}, {
1794 &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
1795 &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
1796 &sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
1797 &sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
1798 &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
1799 &sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr,
1800 &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
1801 &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
1802 &sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
1803 NULL
1804} };
1805
1806static const struct attribute_group it87_group_autopwm[3] = {
1807 { .attrs = it87_attributes_autopwm[0] },
1808 { .attrs = it87_attributes_autopwm[1] },
1809 { .attrs = it87_attributes_autopwm[2] },
1810};
1811
1812static struct attribute *it87_attributes_fan_beep[] = {
1813 &sensor_dev_attr_fan1_beep.dev_attr.attr,
1814 &sensor_dev_attr_fan2_beep.dev_attr.attr,
1815 &sensor_dev_attr_fan3_beep.dev_attr.attr,
1816 &sensor_dev_attr_fan4_beep.dev_attr.attr,
1817 &sensor_dev_attr_fan5_beep.dev_attr.attr,
1818 &sensor_dev_attr_fan6_beep.dev_attr.attr,
1819};
1820
1821static struct attribute *it87_attributes_vid[] = {
1822 &dev_attr_vrm.attr,
1823 &dev_attr_cpu0_vid.attr,
1824 NULL
1825};
1826
1827static const struct attribute_group it87_group_vid = {
1828 .attrs = it87_attributes_vid,
1829};
1830
1831static struct attribute *it87_attributes_label[] = {
1832 &sensor_dev_attr_in3_label.dev_attr.attr,
1833 &sensor_dev_attr_in7_label.dev_attr.attr,
1834 &sensor_dev_attr_in8_label.dev_attr.attr,
1835 &sensor_dev_attr_in9_label.dev_attr.attr,
1836 NULL
1837};
1838
1839static const struct attribute_group it87_group_label = {
1840 .attrs = it87_attributes_label,
1841};
1842
1843/* SuperIO detection - will change isa_address if a chip is found */
1844static int __init it87_find(unsigned short *address,
1845 struct it87_sio_data *sio_data)
1846{
1847 int err;
1848 u16 chip_type;
1849 const char *board_vendor, *board_name;
1850 const struct it87_devices *config;
1851
1852 err = superio_enter();
1853 if (err)
1854 return err;
1855
1856 err = -ENODEV;
1857 chip_type = force_id ? force_id : superio_inw(DEVID);
1858
1859 switch (chip_type) {
1860 case IT8705F_DEVID:
1861 sio_data->type = it87;
1862 break;
1863 case IT8712F_DEVID:
1864 sio_data->type = it8712;
1865 break;
1866 case IT8716F_DEVID:
1867 case IT8726F_DEVID:
1868 sio_data->type = it8716;
1869 break;
1870 case IT8718F_DEVID:
1871 sio_data->type = it8718;
1872 break;
1873 case IT8720F_DEVID:
1874 sio_data->type = it8720;
1875 break;
1876 case IT8721F_DEVID:
1877 sio_data->type = it8721;
1878 break;
1879 case IT8728F_DEVID:
1880 sio_data->type = it8728;
1881 break;
1882 case IT8732F_DEVID:
1883 sio_data->type = it8732;
1884 break;
1885 case IT8771E_DEVID:
1886 sio_data->type = it8771;
1887 break;
1888 case IT8772E_DEVID:
1889 sio_data->type = it8772;
1890 break;
1891 case IT8781F_DEVID:
1892 sio_data->type = it8781;
1893 break;
1894 case IT8782F_DEVID:
1895 sio_data->type = it8782;
1896 break;
1897 case IT8783E_DEVID:
1898 sio_data->type = it8783;
1899 break;
1900 case IT8786E_DEVID:
1901 sio_data->type = it8786;
1902 break;
1903 case IT8790E_DEVID:
1904 sio_data->type = it8790;
1905 break;
1906 case IT8603E_DEVID:
1907 case IT8623E_DEVID:
1908 sio_data->type = it8603;
1909 break;
1910 case IT8620E_DEVID:
1911 sio_data->type = it8620;
1912 break;
1913 case 0xffff: /* No device at all */
1914 goto exit;
1915 default:
1916 pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
1917 goto exit;
1918 }
1919
1920 superio_select(PME);
1921 if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
1922 pr_info("Device not activated, skipping\n");
1923 goto exit;
1924 }
1925
1926 *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
1927 if (*address == 0) {
1928 pr_info("Base address not set, skipping\n");
1929 goto exit;
1930 }
1931
1932 err = 0;
1933 sio_data->revision = superio_inb(DEVREV) & 0x0f;
1934 pr_info("Found IT%04x%s chip at 0x%x, revision %d\n", chip_type,
1935 it87_devices[sio_data->type].suffix,
1936 *address, sio_data->revision);
1937
1938 config = &it87_devices[sio_data->type];
1939
1940 /* in7 (VSB or VCCH5V) is always internal on some chips */
1941 if (has_in7_internal(config))
1942 sio_data->internal |= (1 << 1);
1943
1944 /* in8 (Vbat) is always internal */
1945 sio_data->internal |= (1 << 2);
1946
1947 /* Only the IT8603E has in9 */
1948 if (sio_data->type != it8603)
1949 sio_data->skip_in |= (1 << 9);
1950
1951 if (!has_vid(config))
1952 sio_data->skip_vid = 1;
1953
1954 /* Read GPIO config and VID value from LDN 7 (GPIO) */
1955 if (sio_data->type == it87) {
1956 /* The IT8705F has a different LD number for GPIO */
1957 superio_select(5);
1958 sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
1959 } else if (sio_data->type == it8783) {
1960 int reg25, reg27, reg2a, reg2c, regef;
1961
1962 superio_select(GPIO);
1963
1964 reg25 = superio_inb(IT87_SIO_GPIO1_REG);
1965 reg27 = superio_inb(IT87_SIO_GPIO3_REG);
1966 reg2a = superio_inb(IT87_SIO_PINX1_REG);
1967 reg2c = superio_inb(IT87_SIO_PINX2_REG);
1968 regef = superio_inb(IT87_SIO_SPI_REG);
1969
1970 /* Check if fan3 is there or not */
1971 if ((reg27 & (1 << 0)) || !(reg2c & (1 << 2)))
1972 sio_data->skip_fan |= (1 << 2);
1973 if ((reg25 & (1 << 4))
1974 || (!(reg2a & (1 << 1)) && (regef & (1 << 0))))
1975 sio_data->skip_pwm |= (1 << 2);
1976
1977 /* Check if fan2 is there or not */
1978 if (reg27 & (1 << 7))
1979 sio_data->skip_fan |= (1 << 1);
1980 if (reg27 & (1 << 3))
1981 sio_data->skip_pwm |= (1 << 1);
1982
1983 /* VIN5 */
1984 if ((reg27 & (1 << 0)) || (reg2c & (1 << 2)))
1985 sio_data->skip_in |= (1 << 5); /* No VIN5 */
1986
1987 /* VIN6 */
1988 if (reg27 & (1 << 1))
1989 sio_data->skip_in |= (1 << 6); /* No VIN6 */
1990
1991 /*
1992 * VIN7
1993 * Does not depend on bit 2 of Reg2C, contrary to datasheet.
1994 */
1995 if (reg27 & (1 << 2)) {
1996 /*
1997 * The data sheet is a bit unclear regarding the
1998 * internal voltage divider for VCCH5V. It says
1999 * "This bit enables and switches VIN7 (pin 91) to the
2000 * internal voltage divider for VCCH5V".
2001 * This is different to other chips, where the internal
2002 * voltage divider would connect VIN7 to an internal
2003 * voltage source. Maybe that is the case here as well.
2004 *
2005 * Since we don't know for sure, re-route it if that is
2006 * not the case, and ask the user to report if the
2007 * resulting voltage is sane.
2008 */
2009 if (!(reg2c & (1 << 1))) {
2010 reg2c |= (1 << 1);
2011 superio_outb(IT87_SIO_PINX2_REG, reg2c);
2012 pr_notice("Routing internal VCCH5V to in7.\n");
2013 }
2014 pr_notice("in7 routed to internal voltage divider, with external pin disabled.\n");
2015 pr_notice("Please report if it displays a reasonable voltage.\n");
2016 }
2017
2018 if (reg2c & (1 << 0))
2019 sio_data->internal |= (1 << 0);
2020 if (reg2c & (1 << 1))
2021 sio_data->internal |= (1 << 1);
2022
2023 sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
2024 } else if (sio_data->type == it8603) {
2025 int reg27, reg29;
2026
2027 superio_select(GPIO);
2028
2029 reg27 = superio_inb(IT87_SIO_GPIO3_REG);
2030
2031 /* Check if fan3 is there or not */
2032 if (reg27 & (1 << 6))
2033 sio_data->skip_pwm |= (1 << 2);
2034 if (reg27 & (1 << 7))
2035 sio_data->skip_fan |= (1 << 2);
2036
2037 /* Check if fan2 is there or not */
2038 reg29 = superio_inb(IT87_SIO_GPIO5_REG);
2039 if (reg29 & (1 << 1))
2040 sio_data->skip_pwm |= (1 << 1);
2041 if (reg29 & (1 << 2))
2042 sio_data->skip_fan |= (1 << 1);
2043
2044 sio_data->skip_in |= (1 << 5); /* No VIN5 */
2045 sio_data->skip_in |= (1 << 6); /* No VIN6 */
2046
2047 sio_data->internal |= (1 << 3); /* in9 is AVCC */
2048
2049 sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
2050 } else if (sio_data->type == it8620) {
2051 int reg;
2052
2053 superio_select(GPIO);
2054
2055 /* Check for fan4, fan5 */
2056 reg = superio_inb(IT87_SIO_GPIO2_REG);
2057 if (!(reg & (1 << 5)))
2058 sio_data->skip_fan |= (1 << 3);
2059 if (!(reg & (1 << 4)))
2060 sio_data->skip_fan |= (1 << 4);
2061
2062 /* Check for pwm3, fan3 */
2063 reg = superio_inb(IT87_SIO_GPIO3_REG);
2064 if (reg & (1 << 6))
2065 sio_data->skip_pwm |= (1 << 2);
2066 if (reg & (1 << 7))
2067 sio_data->skip_fan |= (1 << 2);
2068
2069 /* Check for pwm2, fan2 */
2070 reg = superio_inb(IT87_SIO_GPIO5_REG);
2071 if (reg & (1 << 1))
2072 sio_data->skip_pwm |= (1 << 1);
2073 if (reg & (1 << 2))
2074 sio_data->skip_fan |= (1 << 1);
2075
2076 sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
2077 } else {
2078 int reg;
2079 bool uart6;
2080
2081 superio_select(GPIO);
2082
2083 reg = superio_inb(IT87_SIO_GPIO3_REG);
2084 if (!sio_data->skip_vid) {
2085 /* We need at least 4 VID pins */
2086 if (reg & 0x0f) {
2087 pr_info("VID is disabled (pins used for GPIO)\n");
2088 sio_data->skip_vid = 1;
2089 }
2090 }
2091
2092 /* Check if fan3 is there or not */
2093 if (reg & (1 << 6))
2094 sio_data->skip_pwm |= (1 << 2);
2095 if (reg & (1 << 7))
2096 sio_data->skip_fan |= (1 << 2);
2097
2098 /* Check if fan2 is there or not */
2099 reg = superio_inb(IT87_SIO_GPIO5_REG);
2100 if (reg & (1 << 1))
2101 sio_data->skip_pwm |= (1 << 1);
2102 if (reg & (1 << 2))
2103 sio_data->skip_fan |= (1 << 1);
2104
2105 if ((sio_data->type == it8718 || sio_data->type == it8720)
2106 && !(sio_data->skip_vid))
2107 sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
2108
2109 reg = superio_inb(IT87_SIO_PINX2_REG);
2110
2111 uart6 = sio_data->type == it8782 && (reg & (1 << 2));
2112
2113 /*
2114 * The IT8720F has no VIN7 pin, so VCCH should always be
2115 * routed internally to VIN7 with an internal divider.
2116 * Curiously, there still is a configuration bit to control
2117 * this, which means it can be set incorrectly. And even
2118 * more curiously, many boards out there are improperly
2119 * configured, even though the IT8720F datasheet claims
2120 * that the internal routing of VCCH to VIN7 is the default
2121 * setting. So we force the internal routing in this case.
2122 *
2123 * On IT8782F, VIN7 is multiplexed with one of the UART6 pins.
2124 * If UART6 is enabled, re-route VIN7 to the internal divider
2125 * if that is not already the case.
2126 */
2127 if ((sio_data->type == it8720 || uart6) && !(reg & (1 << 1))) {
2128 reg |= (1 << 1);
2129 superio_outb(IT87_SIO_PINX2_REG, reg);
2130 pr_notice("Routing internal VCCH to in7\n");
2131 }
2132 if (reg & (1 << 0))
2133 sio_data->internal |= (1 << 0);
2134 if (reg & (1 << 1))
2135 sio_data->internal |= (1 << 1);
2136
2137 /*
2138 * On IT8782F, UART6 pins overlap with VIN5, VIN6, and VIN7.
2139 * While VIN7 can be routed to the internal voltage divider,
2140 * VIN5 and VIN6 are not available if UART6 is enabled.
2141 *
2142 * Also, temp3 is not available if UART6 is enabled and TEMPIN3
2143 * is the temperature source. Since we can not read the
2144 * temperature source here, skip_temp is preliminary.
2145 */
2146 if (uart6) {
2147 sio_data->skip_in |= (1 << 5) | (1 << 6);
2148 sio_data->skip_temp |= (1 << 2);
2149 }
2150
2151 sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
2152 }
2153 if (sio_data->beep_pin)
2154 pr_info("Beeping is supported\n");
2155
2156 /* Disable specific features based on DMI strings */
2157 board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
2158 board_name = dmi_get_system_info(DMI_BOARD_NAME);
2159 if (board_vendor && board_name) {
2160 if (strcmp(board_vendor, "nVIDIA") == 0
2161 && strcmp(board_name, "FN68PT") == 0) {
2162 /*
2163 * On the Shuttle SN68PT, FAN_CTL2 is apparently not
2164 * connected to a fan, but to something else. One user
2165 * has reported instant system power-off when changing
2166 * the PWM2 duty cycle, so we disable it.
2167 * I use the board name string as the trigger in case
2168 * the same board is ever used in other systems.
2169 */
2170 pr_info("Disabling pwm2 due to hardware constraints\n");
2171 sio_data->skip_pwm = (1 << 1);
2172 }
2173 }
2174
2175exit:
2176 superio_exit();
2177 return err;
2178}
2179
2180static void it87_remove_files(struct device *dev)
2181{
2182 struct it87_data *data = platform_get_drvdata(pdev);
2183 struct it87_sio_data *sio_data = dev_get_platdata(dev);
2184 int i;
2185
2186 sysfs_remove_group(&dev->kobj, &it87_group);
2187 for (i = 0; i < 10; i++) {
2188 if (sio_data->skip_in & (1 << i))
2189 continue;
2190 sysfs_remove_group(&dev->kobj, &it87_group_in[i]);
2191 if (it87_attributes_in_beep[i])
2192 sysfs_remove_file(&dev->kobj,
2193 it87_attributes_in_beep[i]);
2194 }
2195 for (i = 0; i < 3; i++) {
2196 if (!(data->has_temp & (1 << i)))
2197 continue;
2198 sysfs_remove_group(&dev->kobj, &it87_group_temp[i]);
2199 if (has_temp_offset(data))
2200 sysfs_remove_file(&dev->kobj,
2201 it87_attributes_temp_offset[i]);
2202 if (sio_data->beep_pin)
2203 sysfs_remove_file(&dev->kobj,
2204 it87_attributes_temp_beep[i]);
2205 }
2206 for (i = 0; i < 6; i++) {
2207 if (!(data->has_fan & (1 << i)))
2208 continue;
2209 sysfs_remove_group(&dev->kobj, &it87_group_fan[i]);
2210 if (sio_data->beep_pin)
2211 sysfs_remove_file(&dev->kobj,
2212 it87_attributes_fan_beep[i]);
2213 if (i < 3 && !has_16bit_fans(data))
2214 sysfs_remove_file(&dev->kobj,
2215 it87_attributes_fan_div[i]);
2216 }
2217 for (i = 0; i < 3; i++) {
2218 if (sio_data->skip_pwm & (1 << i))
2219 continue;
2220 sysfs_remove_group(&dev->kobj, &it87_group_pwm[i]);
2221 if (has_old_autopwm(data))
2222 sysfs_remove_group(&dev->kobj,
2223 &it87_group_autopwm[i]);
2224 }
2225 if (!sio_data->skip_vid)
2226 sysfs_remove_group(&dev->kobj, &it87_group_vid);
2227 sysfs_remove_group(&dev->kobj, &it87_group_label);
2228}
2229
2230static int it87_probe(struct platform_device *pdev)
2231{
2232 struct it87_data *data;
2233 struct resource *res;
2234 struct device *dev = &pdev->dev;
2235 struct it87_sio_data *sio_data = dev_get_platdata(dev);
2236 int err = 0, i;
2237 int enable_pwm_interface;
2238 int fan_beep_need_rw;
2239
2240 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
2241 if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT,
2242 DRVNAME)) {
2243 dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
2244 (unsigned long)res->start,
2245 (unsigned long)(res->start + IT87_EC_EXTENT - 1));
2246 return -EBUSY;
2247 }
2248
2249 data = devm_kzalloc(&pdev->dev, sizeof(struct it87_data), GFP_KERNEL);
2250 if (!data)
2251 return -ENOMEM;
2252
2253 data->addr = res->start;
2254 data->type = sio_data->type;
2255 data->features = it87_devices[sio_data->type].features;
2256 data->peci_mask = it87_devices[sio_data->type].peci_mask;
2257 data->old_peci_mask = it87_devices[sio_data->type].old_peci_mask;
2258 data->name = it87_devices[sio_data->type].name;
2259 /*
2260 * IT8705F Datasheet 0.4.1, 3h == Version G.
2261 * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
2262 * These are the first revisions with 16-bit tachometer support.
2263 */
2264 switch (data->type) {
2265 case it87:
2266 if (sio_data->revision >= 0x03) {
2267 data->features &= ~FEAT_OLD_AUTOPWM;
2268 data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS;
2269 }
2270 break;
2271 case it8712:
2272 if (sio_data->revision >= 0x08) {
2273 data->features &= ~FEAT_OLD_AUTOPWM;
2274 data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS |
2275 FEAT_FIVE_FANS;
2276 }
2277 break;
2278 default:
2279 break;
2280 }
2281
2282 /* Now, we do the remaining detection. */
2283 if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
2284 || it87_read_value(data, IT87_REG_CHIPID) != 0x90)
2285 return -ENODEV;
2286
2287 platform_set_drvdata(pdev, data);
2288
2289 mutex_init(&data->update_lock);
2290
2291 /* Check PWM configuration */
2292 enable_pwm_interface = it87_check_pwm(dev);
2293
2294 /* Starting with IT8721F, we handle scaling of internal voltages */
2295 if (has_12mv_adc(data)) {
2296 if (sio_data->internal & (1 << 0))
2297 data->in_scaled |= (1 << 3); /* in3 is AVCC */
2298 if (sio_data->internal & (1 << 1))
2299 data->in_scaled |= (1 << 7); /* in7 is VSB */
2300 if (sio_data->internal & (1 << 2))
2301 data->in_scaled |= (1 << 8); /* in8 is Vbat */
2302 if (sio_data->internal & (1 << 3))
2303 data->in_scaled |= (1 << 9); /* in9 is AVCC */
2304 } else if (sio_data->type == it8781 || sio_data->type == it8782 ||
2305 sio_data->type == it8783) {
2306 if (sio_data->internal & (1 << 0))
2307 data->in_scaled |= (1 << 3); /* in3 is VCC5V */
2308 if (sio_data->internal & (1 << 1))
2309 data->in_scaled |= (1 << 7); /* in7 is VCCH5V */
2310 }
2311
2312 data->has_temp = 0x07;
2313 if (sio_data->skip_temp & (1 << 2)) {
2314 if (sio_data->type == it8782
2315 && !(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80))
2316 data->has_temp &= ~(1 << 2);
2317 }
2318
2319 /* Initialize the IT87 chip */
2320 it87_init_device(pdev);
2321
2322 /* Register sysfs hooks */
2323 err = sysfs_create_group(&dev->kobj, &it87_group);
2324 if (err)
2325 return err;
2326
2327 for (i = 0; i < 10; i++) {
2328 if (sio_data->skip_in & (1 << i))
2329 continue;
2330 err = sysfs_create_group(&dev->kobj, &it87_group_in[i]);
2331 if (err)
2332 goto error;
2333 if (sio_data->beep_pin && it87_attributes_in_beep[i]) {
2334 err = sysfs_create_file(&dev->kobj,
2335 it87_attributes_in_beep[i]);
2336 if (err)
2337 goto error;
2338 }
2339 }
2340
2341 for (i = 0; i < 3; i++) {
2342 if (!(data->has_temp & (1 << i)))
2343 continue;
2344 err = sysfs_create_group(&dev->kobj, &it87_group_temp[i]);
2345 if (err)
2346 goto error;
2347 if (has_temp_offset(data)) {
2348 err = sysfs_create_file(&dev->kobj,
2349 it87_attributes_temp_offset[i]);
2350 if (err)
2351 goto error;
2352 }
2353 if (sio_data->beep_pin) {
2354 err = sysfs_create_file(&dev->kobj,
2355 it87_attributes_temp_beep[i]);
2356 if (err)
2357 goto error;
2358 }
2359 }
2360
2361 /* Do not create fan files for disabled fans */
2362 fan_beep_need_rw = 1;
2363 for (i = 0; i < 6; i++) {
2364 if (!(data->has_fan & (1 << i)))
2365 continue;
2366 err = sysfs_create_group(&dev->kobj, &it87_group_fan[i]);
2367 if (err)
2368 goto error;
2369
2370 if (i < 3 && !has_16bit_fans(data)) {
2371 err = sysfs_create_file(&dev->kobj,
2372 it87_attributes_fan_div[i]);
2373 if (err)
2374 goto error;
2375 }
2376
2377 if (sio_data->beep_pin) {
2378 err = sysfs_create_file(&dev->kobj,
2379 it87_attributes_fan_beep[i]);
2380 if (err)
2381 goto error;
2382 if (!fan_beep_need_rw)
2383 continue;
2384
2385 /*
2386 * As we have a single beep enable bit for all fans,
2387 * only the first enabled fan has a writable attribute
2388 * for it.
2389 */
2390 if (sysfs_chmod_file(&dev->kobj,
2391 it87_attributes_fan_beep[i],
2392 S_IRUGO | S_IWUSR))
2393 dev_dbg(dev, "chmod +w fan%d_beep failed\n",
2394 i + 1);
2395 fan_beep_need_rw = 0;
2396 }
2397 }
2398
2399 if (enable_pwm_interface) {
2400 for (i = 0; i < 3; i++) {
2401 if (sio_data->skip_pwm & (1 << i))
2402 continue;
2403 err = sysfs_create_group(&dev->kobj,
2404 &it87_group_pwm[i]);
2405 if (err)
2406 goto error;
2407
2408 if (!has_old_autopwm(data))
2409 continue;
2410 err = sysfs_create_group(&dev->kobj,
2411 &it87_group_autopwm[i]);
2412 if (err)
2413 goto error;
2414 }
2415 }
2416
2417 if (!sio_data->skip_vid) {
2418 data->vrm = vid_which_vrm();
2419 /* VID reading from Super-I/O config space if available */
2420 data->vid = sio_data->vid_value;
2421 err = sysfs_create_group(&dev->kobj, &it87_group_vid);
2422 if (err)
2423 goto error;
2424 }
2425
2426 /* Export labels for internal sensors */
2427 for (i = 0; i < 4; i++) {
2428 if (!(sio_data->internal & (1 << i)))
2429 continue;
2430 err = sysfs_create_file(&dev->kobj,
2431 it87_attributes_label[i]);
2432 if (err)
2433 goto error;
2434 }
2435
2436 data->hwmon_dev = hwmon_device_register(dev);
2437 if (IS_ERR(data->hwmon_dev)) {
2438 err = PTR_ERR(data->hwmon_dev);
2439 goto error;
2440 }
2441
2442 return 0;
2443
2444error:
2445 it87_remove_files(dev);
2446 return err;
2447}
2448
2449static int it87_remove(struct platform_device *pdev)
2450{
2451 struct it87_data *data = platform_get_drvdata(pdev);
2452
2453 hwmon_device_unregister(data->hwmon_dev);
2454 it87_remove_files(&pdev->dev);
2455
2456 return 0;
2457}
2458
2459/*
2460 * Must be called with data->update_lock held, except during initialization.
2461 * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
2462 * would slow down the IT87 access and should not be necessary.
2463 */
2464static int it87_read_value(struct it87_data *data, u8 reg)
2465{
2466 outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
2467 return inb_p(data->addr + IT87_DATA_REG_OFFSET);
2468}
2469
2470/*
2471 * Must be called with data->update_lock held, except during initialization.
2472 * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
2473 * would slow down the IT87 access and should not be necessary.
2474 */
2475static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
2476{
2477 outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
2478 outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
2479}
2480
2481/* Return 1 if and only if the PWM interface is safe to use */
2482static int it87_check_pwm(struct device *dev)
2483{
2484 struct it87_data *data = dev_get_drvdata(dev);
2485 /*
2486 * Some BIOSes fail to correctly configure the IT87 fans. All fans off
2487 * and polarity set to active low is sign that this is the case so we
2488 * disable pwm control to protect the user.
2489 */
2490 int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
2491 if ((tmp & 0x87) == 0) {
2492 if (fix_pwm_polarity) {
2493 /*
2494 * The user asks us to attempt a chip reconfiguration.
2495 * This means switching to active high polarity and
2496 * inverting all fan speed values.
2497 */
2498 int i;
2499 u8 pwm[3];
2500
2501 for (i = 0; i < 3; i++)
2502 pwm[i] = it87_read_value(data,
2503 IT87_REG_PWM(i));
2504
2505 /*
2506 * If any fan is in automatic pwm mode, the polarity
2507 * might be correct, as suspicious as it seems, so we
2508 * better don't change anything (but still disable the
2509 * PWM interface).
2510 */
2511 if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
2512 dev_info(dev,
2513 "Reconfiguring PWM to active high polarity\n");
2514 it87_write_value(data, IT87_REG_FAN_CTL,
2515 tmp | 0x87);
2516 for (i = 0; i < 3; i++)
2517 it87_write_value(data,
2518 IT87_REG_PWM(i),
2519 0x7f & ~pwm[i]);
2520 return 1;
2521 }
2522
2523 dev_info(dev,
2524 "PWM configuration is too broken to be fixed\n");
2525 }
2526
2527 dev_info(dev,
2528 "Detected broken BIOS defaults, disabling PWM interface\n");
2529 return 0;
2530 } else if (fix_pwm_polarity) {
2531 dev_info(dev,
2532 "PWM configuration looks sane, won't touch\n");
2533 }
2534
2535 return 1;
2536}
2537
2538/* Called when we have found a new IT87. */
2539static void it87_init_device(struct platform_device *pdev)
2540{
2541 struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
2542 struct it87_data *data = platform_get_drvdata(pdev);
2543 int tmp, i;
2544 u8 mask;
2545
2546 /*
2547 * For each PWM channel:
2548 * - If it is in automatic mode, setting to manual mode should set
2549 * the fan to full speed by default.
2550 * - If it is in manual mode, we need a mapping to temperature
2551 * channels to use when later setting to automatic mode later.
2552 * Use a 1:1 mapping by default (we are clueless.)
2553 * In both cases, the value can (and should) be changed by the user
2554 * prior to switching to a different mode.
2555 * Note that this is no longer needed for the IT8721F and later, as
2556 * these have separate registers for the temperature mapping and the
2557 * manual duty cycle.
2558 */
2559 for (i = 0; i < 3; i++) {
2560 data->pwm_temp_map[i] = i;
2561 data->pwm_duty[i] = 0x7f; /* Full speed */
2562 data->auto_pwm[i][3] = 0x7f; /* Full speed, hard-coded */
2563 }
2564
2565 /*
2566 * Some chips seem to have default value 0xff for all limit
2567 * registers. For low voltage limits it makes no sense and triggers
2568 * alarms, so change to 0 instead. For high temperature limits, it
2569 * means -1 degree C, which surprisingly doesn't trigger an alarm,
2570 * but is still confusing, so change to 127 degrees C.
2571 */
2572 for (i = 0; i < 8; i++) {
2573 tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
2574 if (tmp == 0xff)
2575 it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
2576 }
2577 for (i = 0; i < 3; i++) {
2578 tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
2579 if (tmp == 0xff)
2580 it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
2581 }
2582
2583 /*
2584 * Temperature channels are not forcibly enabled, as they can be
2585 * set to two different sensor types and we can't guess which one
2586 * is correct for a given system. These channels can be enabled at
2587 * run-time through the temp{1-3}_type sysfs accessors if needed.
2588 */
2589
2590 /* Check if voltage monitors are reset manually or by some reason */
2591 tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
2592 if ((tmp & 0xff) == 0) {
2593 /* Enable all voltage monitors */
2594 it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
2595 }
2596
2597 /* Check if tachometers are reset manually or by some reason */
2598 mask = 0x70 & ~(sio_data->skip_fan << 4);
2599 data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
2600 if ((data->fan_main_ctrl & mask) == 0) {
2601 /* Enable all fan tachometers */
2602 data->fan_main_ctrl |= mask;
2603 it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
2604 data->fan_main_ctrl);
2605 }
2606 data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
2607
2608 tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
2609
2610 /* Set tachometers to 16-bit mode if needed */
2611 if (has_fan16_config(data)) {
2612 if (~tmp & 0x07 & data->has_fan) {
2613 dev_dbg(&pdev->dev,
2614 "Setting fan1-3 to 16-bit mode\n");
2615 it87_write_value(data, IT87_REG_FAN_16BIT,
2616 tmp | 0x07);
2617 }
2618 }
2619
2620 /* Check for additional fans */
2621 if (has_five_fans(data)) {
2622 if (tmp & (1 << 4))
2623 data->has_fan |= (1 << 3); /* fan4 enabled */
2624 if (tmp & (1 << 5))
2625 data->has_fan |= (1 << 4); /* fan5 enabled */
2626 if (has_six_fans(data) && (tmp & (1 << 2)))
2627 data->has_fan |= (1 << 5); /* fan6 enabled */
2628 }
2629
2630 /* Fan input pins may be used for alternative functions */
2631 data->has_fan &= ~sio_data->skip_fan;
2632
2633 /* Start monitoring */
2634 it87_write_value(data, IT87_REG_CONFIG,
2635 (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
2636 | (update_vbat ? 0x41 : 0x01));
2637}
2638
2639static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
2640{
2641 data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
2642 if (has_newer_autopwm(data)) {
2643 data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
2644 data->pwm_duty[nr] = it87_read_value(data,
2645 IT87_REG_PWM_DUTY(nr));
2646 } else {
2647 if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
2648 data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
2649 else /* Manual mode */
2650 data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
2651 }
2652
2653 if (has_old_autopwm(data)) {
2654 int i;
2655
2656 for (i = 0; i < 5 ; i++)
2657 data->auto_temp[nr][i] = it87_read_value(data,
2658 IT87_REG_AUTO_TEMP(nr, i));
2659 for (i = 0; i < 3 ; i++)
2660 data->auto_pwm[nr][i] = it87_read_value(data,
2661 IT87_REG_AUTO_PWM(nr, i));
2662 }
2663}
2664
2665static struct it87_data *it87_update_device(struct device *dev)
2666{
2667 struct it87_data *data = dev_get_drvdata(dev);
2668 int i;
2669
2670 mutex_lock(&data->update_lock);
2671
2672 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
2673 || !data->valid) {
2674 if (update_vbat) {
2675 /*
2676 * Cleared after each update, so reenable. Value
2677 * returned by this read will be previous value
2678 */
2679 it87_write_value(data, IT87_REG_CONFIG,
2680 it87_read_value(data, IT87_REG_CONFIG) | 0x40);
2681 }
2682 for (i = 0; i <= 7; i++) {
2683 data->in[i][0] =
2684 it87_read_value(data, IT87_REG_VIN(i));
2685 data->in[i][1] =
2686 it87_read_value(data, IT87_REG_VIN_MIN(i));
2687 data->in[i][2] =
2688 it87_read_value(data, IT87_REG_VIN_MAX(i));
2689 }
2690 /* in8 (battery) has no limit registers */
2691 data->in[8][0] = it87_read_value(data, IT87_REG_VIN(8));
2692 if (data->type == it8603)
2693 data->in[9][0] = it87_read_value(data, 0x2f);
2694
2695 for (i = 0; i < 6; i++) {
2696 /* Skip disabled fans */
2697 if (!(data->has_fan & (1 << i)))
2698 continue;
2699
2700 data->fan[i][1] =
2701 it87_read_value(data, IT87_REG_FAN_MIN[i]);
2702 data->fan[i][0] = it87_read_value(data,
2703 IT87_REG_FAN[i]);
2704 /* Add high byte if in 16-bit mode */
2705 if (has_16bit_fans(data)) {
2706 data->fan[i][0] |= it87_read_value(data,
2707 IT87_REG_FANX[i]) << 8;
2708 data->fan[i][1] |= it87_read_value(data,
2709 IT87_REG_FANX_MIN[i]) << 8;
2710 }
2711 }
2712 for (i = 0; i < 3; i++) {
2713 if (!(data->has_temp & (1 << i)))
2714 continue;
2715 data->temp[i][0] =
2716 it87_read_value(data, IT87_REG_TEMP(i));
2717 data->temp[i][1] =
2718 it87_read_value(data, IT87_REG_TEMP_LOW(i));
2719 data->temp[i][2] =
2720 it87_read_value(data, IT87_REG_TEMP_HIGH(i));
2721 if (has_temp_offset(data))
2722 data->temp[i][3] =
2723 it87_read_value(data,
2724 IT87_REG_TEMP_OFFSET[i]);
2725 }
2726
2727 /* Newer chips don't have clock dividers */
2728 if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
2729 i = it87_read_value(data, IT87_REG_FAN_DIV);
2730 data->fan_div[0] = i & 0x07;
2731 data->fan_div[1] = (i >> 3) & 0x07;
2732 data->fan_div[2] = (i & 0x40) ? 3 : 1;
2733 }
2734
2735 data->alarms =
2736 it87_read_value(data, IT87_REG_ALARM1) |
2737 (it87_read_value(data, IT87_REG_ALARM2) << 8) |
2738 (it87_read_value(data, IT87_REG_ALARM3) << 16);
2739 data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
2740
2741 data->fan_main_ctrl = it87_read_value(data,
2742 IT87_REG_FAN_MAIN_CTRL);
2743 data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
2744 for (i = 0; i < 3; i++)
2745 it87_update_pwm_ctrl(data, i);
2746
2747 data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
2748 data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
2749 /*
2750 * The IT8705F does not have VID capability.
2751 * The IT8718F and later don't use IT87_REG_VID for the
2752 * same purpose.
2753 */
2754 if (data->type == it8712 || data->type == it8716) {
2755 data->vid = it87_read_value(data, IT87_REG_VID);
2756 /*
2757 * The older IT8712F revisions had only 5 VID pins,
2758 * but we assume it is always safe to read 6 bits.
2759 */
2760 data->vid &= 0x3f;
2761 }
2762 data->last_updated = jiffies;
2763 data->valid = 1;
2764 }
2765
2766 mutex_unlock(&data->update_lock);
2767
2768 return data;
2769}
2770
2771static int __init it87_device_add(unsigned short address,
2772 const struct it87_sio_data *sio_data)
2773{
2774 struct resource res = {
2775 .start = address + IT87_EC_OFFSET,
2776 .end = address + IT87_EC_OFFSET + IT87_EC_EXTENT - 1,
2777 .name = DRVNAME,
2778 .flags = IORESOURCE_IO,
2779 };
2780 int err;
2781
2782 err = acpi_check_resource_conflict(&res);
2783 if (err)
2784 goto exit;
2785
2786 pdev = platform_device_alloc(DRVNAME, address);
2787 if (!pdev) {
2788 err = -ENOMEM;
2789 pr_err("Device allocation failed\n");
2790 goto exit;
2791 }
2792
2793 err = platform_device_add_resources(pdev, &res, 1);
2794 if (err) {
2795 pr_err("Device resource addition failed (%d)\n", err);
2796 goto exit_device_put;
2797 }
2798
2799 err = platform_device_add_data(pdev, sio_data,
2800 sizeof(struct it87_sio_data));
2801 if (err) {
2802 pr_err("Platform data allocation failed\n");
2803 goto exit_device_put;
2804 }
2805
2806 err = platform_device_add(pdev);
2807 if (err) {
2808 pr_err("Device addition failed (%d)\n", err);
2809 goto exit_device_put;
2810 }
2811
2812 return 0;
2813
2814exit_device_put:
2815 platform_device_put(pdev);
2816exit:
2817 return err;
2818}
2819
2820static int __init sm_it87_init(void)
2821{
2822 int err;
2823 unsigned short isa_address = 0;
2824 struct it87_sio_data sio_data;
2825
2826 memset(&sio_data, 0, sizeof(struct it87_sio_data));
2827 err = it87_find(&isa_address, &sio_data);
2828 if (err)
2829 return err;
2830 err = platform_driver_register(&it87_driver);
2831 if (err)
2832 return err;
2833
2834 err = it87_device_add(isa_address, &sio_data);
2835 if (err) {
2836 platform_driver_unregister(&it87_driver);
2837 return err;
2838 }
2839
2840 return 0;
2841}
2842
2843static void __exit sm_it87_exit(void)
2844{
2845 platform_device_unregister(pdev);
2846 platform_driver_unregister(&it87_driver);
2847}
2848
2849
2850MODULE_AUTHOR("Chris Gauthron, Jean Delvare <jdelvare@suse.de>");
2851MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver");
2852module_param(update_vbat, bool, 0);
2853MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
2854module_param(fix_pwm_polarity, bool, 0);
2855MODULE_PARM_DESC(fix_pwm_polarity,
2856 "Force PWM polarity to active high (DANGEROUS)");
2857MODULE_LICENSE("GPL");
2858
2859module_init(sm_it87_init);
2860module_exit(sm_it87_exit);