Linux Audio

Check our new training course

Linux debugging, profiling, tracing and performance analysis training

Mar 24-27, 2025, special US time zones
Register
Loading...
v3.1
  1/*
  2 * File:	htirq.c
  3 * Purpose:	Hypertransport Interrupt Capability
  4 *
  5 * Copyright (C) 2006 Linux Networx
  6 * Copyright (C) Eric Biederman <ebiederman@lnxi.com>
  7 */
  8
  9#include <linux/irq.h>
 10#include <linux/pci.h>
 11#include <linux/spinlock.h>
 
 12#include <linux/slab.h>
 13#include <linux/htirq.h>
 14
 15/* Global ht irq lock.
 16 *
 17 * This is needed to serialize access to the data port in hypertransport
 18 * irq capability.
 19 *
 20 * With multiple simultaneous hypertransport irq devices it might pay
 21 * to make this more fine grained.  But start with simple, stupid, and correct.
 22 */
 23static DEFINE_SPINLOCK(ht_irq_lock);
 24
 25struct ht_irq_cfg {
 26	struct pci_dev *dev;
 27	 /* Update callback used to cope with buggy hardware */
 28	ht_irq_update_t *update;
 29	unsigned pos;
 30	unsigned idx;
 31	struct ht_irq_msg msg;
 32};
 33
 34
 35void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
 36{
 37	struct ht_irq_cfg *cfg = irq_get_handler_data(irq);
 38	unsigned long flags;
 
 39	spin_lock_irqsave(&ht_irq_lock, flags);
 40	if (cfg->msg.address_lo != msg->address_lo) {
 41		pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
 42		pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_lo);
 43	}
 44	if (cfg->msg.address_hi != msg->address_hi) {
 45		pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
 46		pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_hi);
 47	}
 48	if (cfg->update)
 49		cfg->update(cfg->dev, irq, msg);
 50	spin_unlock_irqrestore(&ht_irq_lock, flags);
 51	cfg->msg = *msg;
 52}
 53
 54void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
 55{
 56	struct ht_irq_cfg *cfg = irq_get_handler_data(irq);
 
 57	*msg = cfg->msg;
 58}
 59
 60void mask_ht_irq(struct irq_data *data)
 61{
 62	struct ht_irq_cfg *cfg = irq_data_get_irq_handler_data(data);
 63	struct ht_irq_msg msg = cfg->msg;
 64
 65	msg.address_lo |= 1;
 66	write_ht_irq_msg(data->irq, &msg);
 67}
 68
 69void unmask_ht_irq(struct irq_data *data)
 70{
 71	struct ht_irq_cfg *cfg = irq_data_get_irq_handler_data(data);
 72	struct ht_irq_msg msg = cfg->msg;
 73
 74	msg.address_lo &= ~1;
 75	write_ht_irq_msg(data->irq, &msg);
 76}
 77
 78/**
 79 * __ht_create_irq - create an irq and attach it to a device.
 80 * @dev: The hypertransport device to find the irq capability on.
 81 * @idx: Which of the possible irqs to attach to.
 82 * @update: Function to be called when changing the htirq message
 83 *
 84 * The irq number of the new irq or a negative error value is returned.
 85 */
 86int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
 87{
 88	struct ht_irq_cfg *cfg;
 89	unsigned long flags;
 90	u32 data;
 91	int max_irq;
 92	int pos;
 93	int irq;
 94	int node;
 95
 96	pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
 97	if (!pos)
 98		return -EINVAL;
 99
100	/* Verify the idx I want to use is in range */
101	spin_lock_irqsave(&ht_irq_lock, flags);
102	pci_write_config_byte(dev, pos + 2, 1);
103	pci_read_config_dword(dev, pos + 4, &data);
104	spin_unlock_irqrestore(&ht_irq_lock, flags);
105
106	max_irq = (data >> 16) & 0xff;
107	if ( idx > max_irq)
108		return -EINVAL;
109
110	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
111	if (!cfg)
112		return -ENOMEM;
113
114	cfg->dev = dev;
115	cfg->update = update;
116	cfg->pos = pos;
117	cfg->idx = 0x10 + (idx * 2);
118	/* Initialize msg to a value that will never match the first write. */
119	cfg->msg.address_lo = 0xffffffff;
120	cfg->msg.address_hi = 0xffffffff;
121
122	node = dev_to_node(&dev->dev);
123	irq = create_irq_nr(0, node);
124
125	if (irq <= 0) {
126		kfree(cfg);
127		return -EBUSY;
128	}
129	irq_set_handler_data(irq, cfg);
130
131	if (arch_setup_ht_irq(irq, dev) < 0) {
132		ht_destroy_irq(irq);
133		return -EBUSY;
134	}
135
136	return irq;
137}
 
138
139/**
140 * ht_create_irq - create an irq and attach it to a device.
141 * @dev: The hypertransport device to find the irq capability on.
142 * @idx: Which of the possible irqs to attach to.
143 *
144 * ht_create_irq needs to be called for all hypertransport devices
145 * that generate irqs.
146 *
147 * The irq number of the new irq or a negative error value is returned.
148 */
149int ht_create_irq(struct pci_dev *dev, int idx)
150{
151	return __ht_create_irq(dev, idx, NULL);
152}
 
153
154/**
155 * ht_destroy_irq - destroy an irq created with ht_create_irq
156 * @irq: irq to be destroyed
157 *
158 * This reverses ht_create_irq removing the specified irq from
159 * existence.  The irq should be free before this happens.
160 */
161void ht_destroy_irq(unsigned int irq)
162{
163	struct ht_irq_cfg *cfg;
164
165	cfg = irq_get_handler_data(irq);
166	irq_set_chip(irq, NULL);
167	irq_set_handler_data(irq, NULL);
168	destroy_irq(irq);
169
170	kfree(cfg);
171}
172
173EXPORT_SYMBOL(__ht_create_irq);
174EXPORT_SYMBOL(ht_create_irq);
175EXPORT_SYMBOL(ht_destroy_irq);
v4.6
  1/*
  2 * File:	htirq.c
  3 * Purpose:	Hypertransport Interrupt Capability
  4 *
  5 * Copyright (C) 2006 Linux Networx
  6 * Copyright (C) Eric Biederman <ebiederman@lnxi.com>
  7 */
  8
  9#include <linux/irq.h>
 10#include <linux/pci.h>
 11#include <linux/spinlock.h>
 12#include <linux/export.h>
 13#include <linux/slab.h>
 14#include <linux/htirq.h>
 15
 16/* Global ht irq lock.
 17 *
 18 * This is needed to serialize access to the data port in hypertransport
 19 * irq capability.
 20 *
 21 * With multiple simultaneous hypertransport irq devices it might pay
 22 * to make this more fine grained.  But start with simple, stupid, and correct.
 23 */
 24static DEFINE_SPINLOCK(ht_irq_lock);
 25
 
 
 
 
 
 
 
 
 
 
 26void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
 27{
 28	struct ht_irq_cfg *cfg = irq_get_handler_data(irq);
 29	unsigned long flags;
 30
 31	spin_lock_irqsave(&ht_irq_lock, flags);
 32	if (cfg->msg.address_lo != msg->address_lo) {
 33		pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
 34		pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_lo);
 35	}
 36	if (cfg->msg.address_hi != msg->address_hi) {
 37		pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
 38		pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_hi);
 39	}
 40	if (cfg->update)
 41		cfg->update(cfg->dev, irq, msg);
 42	spin_unlock_irqrestore(&ht_irq_lock, flags);
 43	cfg->msg = *msg;
 44}
 45
 46void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
 47{
 48	struct ht_irq_cfg *cfg = irq_get_handler_data(irq);
 49
 50	*msg = cfg->msg;
 51}
 52
 53void mask_ht_irq(struct irq_data *data)
 54{
 55	struct ht_irq_cfg *cfg = irq_data_get_irq_handler_data(data);
 56	struct ht_irq_msg msg = cfg->msg;
 57
 58	msg.address_lo |= 1;
 59	write_ht_irq_msg(data->irq, &msg);
 60}
 61
 62void unmask_ht_irq(struct irq_data *data)
 63{
 64	struct ht_irq_cfg *cfg = irq_data_get_irq_handler_data(data);
 65	struct ht_irq_msg msg = cfg->msg;
 66
 67	msg.address_lo &= ~1;
 68	write_ht_irq_msg(data->irq, &msg);
 69}
 70
 71/**
 72 * __ht_create_irq - create an irq and attach it to a device.
 73 * @dev: The hypertransport device to find the irq capability on.
 74 * @idx: Which of the possible irqs to attach to.
 75 * @update: Function to be called when changing the htirq message
 76 *
 77 * The irq number of the new irq or a negative error value is returned.
 78 */
 79int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
 80{
 81	int max_irq, pos, irq;
 82	unsigned long flags;
 83	u32 data;
 
 
 
 
 84
 85	pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
 86	if (!pos)
 87		return -EINVAL;
 88
 89	/* Verify the idx I want to use is in range */
 90	spin_lock_irqsave(&ht_irq_lock, flags);
 91	pci_write_config_byte(dev, pos + 2, 1);
 92	pci_read_config_dword(dev, pos + 4, &data);
 93	spin_unlock_irqrestore(&ht_irq_lock, flags);
 94
 95	max_irq = (data >> 16) & 0xff;
 96	if (idx > max_irq)
 97		return -EINVAL;
 98
 99	irq = arch_setup_ht_irq(idx, pos, dev, update);
100	if (irq > 0)
101		dev_dbg(&dev->dev, "irq %d for HT\n", irq);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
102
103	return irq;
104}
105EXPORT_SYMBOL(__ht_create_irq);
106
107/**
108 * ht_create_irq - create an irq and attach it to a device.
109 * @dev: The hypertransport device to find the irq capability on.
110 * @idx: Which of the possible irqs to attach to.
111 *
112 * ht_create_irq needs to be called for all hypertransport devices
113 * that generate irqs.
114 *
115 * The irq number of the new irq or a negative error value is returned.
116 */
117int ht_create_irq(struct pci_dev *dev, int idx)
118{
119	return __ht_create_irq(dev, idx, NULL);
120}
121EXPORT_SYMBOL(ht_create_irq);
122
123/**
124 * ht_destroy_irq - destroy an irq created with ht_create_irq
125 * @irq: irq to be destroyed
126 *
127 * This reverses ht_create_irq removing the specified irq from
128 * existence.  The irq should be free before this happens.
129 */
130void ht_destroy_irq(unsigned int irq)
131{
132	arch_teardown_ht_irq(irq);
 
 
 
 
 
 
 
133}
 
 
 
134EXPORT_SYMBOL(ht_destroy_irq);