Loading...
1/*
2 * Handle the memory map.
3 * The functions here do the job until bootmem takes over.
4 *
5 * Getting sanitize_e820_map() in sync with i386 version by applying change:
6 * - Provisions for empty E820 memory regions (reported by certain BIOSes).
7 * Alex Achenbach <xela@slit.de>, December 2002.
8 * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
9 *
10 */
11#include <linux/kernel.h>
12#include <linux/types.h>
13#include <linux/init.h>
14#include <linux/crash_dump.h>
15#include <linux/bootmem.h>
16#include <linux/pfn.h>
17#include <linux/suspend.h>
18#include <linux/acpi.h>
19#include <linux/firmware-map.h>
20#include <linux/memblock.h>
21
22#include <asm/e820.h>
23#include <asm/proto.h>
24#include <asm/setup.h>
25
26/*
27 * The e820 map is the map that gets modified e.g. with command line parameters
28 * and that is also registered with modifications in the kernel resource tree
29 * with the iomem_resource as parent.
30 *
31 * The e820_saved is directly saved after the BIOS-provided memory map is
32 * copied. It doesn't get modified afterwards. It's registered for the
33 * /sys/firmware/memmap interface.
34 *
35 * That memory map is not modified and is used as base for kexec. The kexec'd
36 * kernel should get the same memory map as the firmware provides. Then the
37 * user can e.g. boot the original kernel with mem=1G while still booting the
38 * next kernel with full memory.
39 */
40struct e820map e820;
41struct e820map e820_saved;
42
43/* For PCI or other memory-mapped resources */
44unsigned long pci_mem_start = 0xaeedbabe;
45#ifdef CONFIG_PCI
46EXPORT_SYMBOL(pci_mem_start);
47#endif
48
49/*
50 * This function checks if any part of the range <start,end> is mapped
51 * with type.
52 */
53int
54e820_any_mapped(u64 start, u64 end, unsigned type)
55{
56 int i;
57
58 for (i = 0; i < e820.nr_map; i++) {
59 struct e820entry *ei = &e820.map[i];
60
61 if (type && ei->type != type)
62 continue;
63 if (ei->addr >= end || ei->addr + ei->size <= start)
64 continue;
65 return 1;
66 }
67 return 0;
68}
69EXPORT_SYMBOL_GPL(e820_any_mapped);
70
71/*
72 * This function checks if the entire range <start,end> is mapped with type.
73 *
74 * Note: this function only works correct if the e820 table is sorted and
75 * not-overlapping, which is the case
76 */
77int __init e820_all_mapped(u64 start, u64 end, unsigned type)
78{
79 int i;
80
81 for (i = 0; i < e820.nr_map; i++) {
82 struct e820entry *ei = &e820.map[i];
83
84 if (type && ei->type != type)
85 continue;
86 /* is the region (part) in overlap with the current region ?*/
87 if (ei->addr >= end || ei->addr + ei->size <= start)
88 continue;
89
90 /* if the region is at the beginning of <start,end> we move
91 * start to the end of the region since it's ok until there
92 */
93 if (ei->addr <= start)
94 start = ei->addr + ei->size;
95 /*
96 * if start is now at or beyond end, we're done, full
97 * coverage
98 */
99 if (start >= end)
100 return 1;
101 }
102 return 0;
103}
104
105/*
106 * Add a memory region to the kernel e820 map.
107 */
108static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
109 int type)
110{
111 int x = e820x->nr_map;
112
113 if (x >= ARRAY_SIZE(e820x->map)) {
114 printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
115 return;
116 }
117
118 e820x->map[x].addr = start;
119 e820x->map[x].size = size;
120 e820x->map[x].type = type;
121 e820x->nr_map++;
122}
123
124void __init e820_add_region(u64 start, u64 size, int type)
125{
126 __e820_add_region(&e820, start, size, type);
127}
128
129static void __init e820_print_type(u32 type)
130{
131 switch (type) {
132 case E820_RAM:
133 case E820_RESERVED_KERN:
134 printk(KERN_CONT "(usable)");
135 break;
136 case E820_RESERVED:
137 printk(KERN_CONT "(reserved)");
138 break;
139 case E820_ACPI:
140 printk(KERN_CONT "(ACPI data)");
141 break;
142 case E820_NVS:
143 printk(KERN_CONT "(ACPI NVS)");
144 break;
145 case E820_UNUSABLE:
146 printk(KERN_CONT "(unusable)");
147 break;
148 default:
149 printk(KERN_CONT "type %u", type);
150 break;
151 }
152}
153
154void __init e820_print_map(char *who)
155{
156 int i;
157
158 for (i = 0; i < e820.nr_map; i++) {
159 printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
160 (unsigned long long) e820.map[i].addr,
161 (unsigned long long)
162 (e820.map[i].addr + e820.map[i].size));
163 e820_print_type(e820.map[i].type);
164 printk(KERN_CONT "\n");
165 }
166}
167
168/*
169 * Sanitize the BIOS e820 map.
170 *
171 * Some e820 responses include overlapping entries. The following
172 * replaces the original e820 map with a new one, removing overlaps,
173 * and resolving conflicting memory types in favor of highest
174 * numbered type.
175 *
176 * The input parameter biosmap points to an array of 'struct
177 * e820entry' which on entry has elements in the range [0, *pnr_map)
178 * valid, and which has space for up to max_nr_map entries.
179 * On return, the resulting sanitized e820 map entries will be in
180 * overwritten in the same location, starting at biosmap.
181 *
182 * The integer pointed to by pnr_map must be valid on entry (the
183 * current number of valid entries located at biosmap) and will
184 * be updated on return, with the new number of valid entries
185 * (something no more than max_nr_map.)
186 *
187 * The return value from sanitize_e820_map() is zero if it
188 * successfully 'sanitized' the map entries passed in, and is -1
189 * if it did nothing, which can happen if either of (1) it was
190 * only passed one map entry, or (2) any of the input map entries
191 * were invalid (start + size < start, meaning that the size was
192 * so big the described memory range wrapped around through zero.)
193 *
194 * Visually we're performing the following
195 * (1,2,3,4 = memory types)...
196 *
197 * Sample memory map (w/overlaps):
198 * ____22__________________
199 * ______________________4_
200 * ____1111________________
201 * _44_____________________
202 * 11111111________________
203 * ____________________33__
204 * ___________44___________
205 * __________33333_________
206 * ______________22________
207 * ___________________2222_
208 * _________111111111______
209 * _____________________11_
210 * _________________4______
211 *
212 * Sanitized equivalent (no overlap):
213 * 1_______________________
214 * _44_____________________
215 * ___1____________________
216 * ____22__________________
217 * ______11________________
218 * _________1______________
219 * __________3_____________
220 * ___________44___________
221 * _____________33_________
222 * _______________2________
223 * ________________1_______
224 * _________________4______
225 * ___________________2____
226 * ____________________33__
227 * ______________________4_
228 */
229
230int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map,
231 u32 *pnr_map)
232{
233 struct change_member {
234 struct e820entry *pbios; /* pointer to original bios entry */
235 unsigned long long addr; /* address for this change point */
236 };
237 static struct change_member change_point_list[2*E820_X_MAX] __initdata;
238 static struct change_member *change_point[2*E820_X_MAX] __initdata;
239 static struct e820entry *overlap_list[E820_X_MAX] __initdata;
240 static struct e820entry new_bios[E820_X_MAX] __initdata;
241 struct change_member *change_tmp;
242 unsigned long current_type, last_type;
243 unsigned long long last_addr;
244 int chgidx, still_changing;
245 int overlap_entries;
246 int new_bios_entry;
247 int old_nr, new_nr, chg_nr;
248 int i;
249
250 /* if there's only one memory region, don't bother */
251 if (*pnr_map < 2)
252 return -1;
253
254 old_nr = *pnr_map;
255 BUG_ON(old_nr > max_nr_map);
256
257 /* bail out if we find any unreasonable addresses in bios map */
258 for (i = 0; i < old_nr; i++)
259 if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
260 return -1;
261
262 /* create pointers for initial change-point information (for sorting) */
263 for (i = 0; i < 2 * old_nr; i++)
264 change_point[i] = &change_point_list[i];
265
266 /* record all known change-points (starting and ending addresses),
267 omitting those that are for empty memory regions */
268 chgidx = 0;
269 for (i = 0; i < old_nr; i++) {
270 if (biosmap[i].size != 0) {
271 change_point[chgidx]->addr = biosmap[i].addr;
272 change_point[chgidx++]->pbios = &biosmap[i];
273 change_point[chgidx]->addr = biosmap[i].addr +
274 biosmap[i].size;
275 change_point[chgidx++]->pbios = &biosmap[i];
276 }
277 }
278 chg_nr = chgidx;
279
280 /* sort change-point list by memory addresses (low -> high) */
281 still_changing = 1;
282 while (still_changing) {
283 still_changing = 0;
284 for (i = 1; i < chg_nr; i++) {
285 unsigned long long curaddr, lastaddr;
286 unsigned long long curpbaddr, lastpbaddr;
287
288 curaddr = change_point[i]->addr;
289 lastaddr = change_point[i - 1]->addr;
290 curpbaddr = change_point[i]->pbios->addr;
291 lastpbaddr = change_point[i - 1]->pbios->addr;
292
293 /*
294 * swap entries, when:
295 *
296 * curaddr > lastaddr or
297 * curaddr == lastaddr and curaddr == curpbaddr and
298 * lastaddr != lastpbaddr
299 */
300 if (curaddr < lastaddr ||
301 (curaddr == lastaddr && curaddr == curpbaddr &&
302 lastaddr != lastpbaddr)) {
303 change_tmp = change_point[i];
304 change_point[i] = change_point[i-1];
305 change_point[i-1] = change_tmp;
306 still_changing = 1;
307 }
308 }
309 }
310
311 /* create a new bios memory map, removing overlaps */
312 overlap_entries = 0; /* number of entries in the overlap table */
313 new_bios_entry = 0; /* index for creating new bios map entries */
314 last_type = 0; /* start with undefined memory type */
315 last_addr = 0; /* start with 0 as last starting address */
316
317 /* loop through change-points, determining affect on the new bios map */
318 for (chgidx = 0; chgidx < chg_nr; chgidx++) {
319 /* keep track of all overlapping bios entries */
320 if (change_point[chgidx]->addr ==
321 change_point[chgidx]->pbios->addr) {
322 /*
323 * add map entry to overlap list (> 1 entry
324 * implies an overlap)
325 */
326 overlap_list[overlap_entries++] =
327 change_point[chgidx]->pbios;
328 } else {
329 /*
330 * remove entry from list (order independent,
331 * so swap with last)
332 */
333 for (i = 0; i < overlap_entries; i++) {
334 if (overlap_list[i] ==
335 change_point[chgidx]->pbios)
336 overlap_list[i] =
337 overlap_list[overlap_entries-1];
338 }
339 overlap_entries--;
340 }
341 /*
342 * if there are overlapping entries, decide which
343 * "type" to use (larger value takes precedence --
344 * 1=usable, 2,3,4,4+=unusable)
345 */
346 current_type = 0;
347 for (i = 0; i < overlap_entries; i++)
348 if (overlap_list[i]->type > current_type)
349 current_type = overlap_list[i]->type;
350 /*
351 * continue building up new bios map based on this
352 * information
353 */
354 if (current_type != last_type) {
355 if (last_type != 0) {
356 new_bios[new_bios_entry].size =
357 change_point[chgidx]->addr - last_addr;
358 /*
359 * move forward only if the new size
360 * was non-zero
361 */
362 if (new_bios[new_bios_entry].size != 0)
363 /*
364 * no more space left for new
365 * bios entries ?
366 */
367 if (++new_bios_entry >= max_nr_map)
368 break;
369 }
370 if (current_type != 0) {
371 new_bios[new_bios_entry].addr =
372 change_point[chgidx]->addr;
373 new_bios[new_bios_entry].type = current_type;
374 last_addr = change_point[chgidx]->addr;
375 }
376 last_type = current_type;
377 }
378 }
379 /* retain count for new bios entries */
380 new_nr = new_bios_entry;
381
382 /* copy new bios mapping into original location */
383 memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
384 *pnr_map = new_nr;
385
386 return 0;
387}
388
389static int __init __append_e820_map(struct e820entry *biosmap, int nr_map)
390{
391 while (nr_map) {
392 u64 start = biosmap->addr;
393 u64 size = biosmap->size;
394 u64 end = start + size;
395 u32 type = biosmap->type;
396
397 /* Overflow in 64 bits? Ignore the memory map. */
398 if (start > end)
399 return -1;
400
401 e820_add_region(start, size, type);
402
403 biosmap++;
404 nr_map--;
405 }
406 return 0;
407}
408
409/*
410 * Copy the BIOS e820 map into a safe place.
411 *
412 * Sanity-check it while we're at it..
413 *
414 * If we're lucky and live on a modern system, the setup code
415 * will have given us a memory map that we can use to properly
416 * set up memory. If we aren't, we'll fake a memory map.
417 */
418static int __init append_e820_map(struct e820entry *biosmap, int nr_map)
419{
420 /* Only one memory region (or negative)? Ignore it */
421 if (nr_map < 2)
422 return -1;
423
424 return __append_e820_map(biosmap, nr_map);
425}
426
427static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
428 u64 size, unsigned old_type,
429 unsigned new_type)
430{
431 u64 end;
432 unsigned int i;
433 u64 real_updated_size = 0;
434
435 BUG_ON(old_type == new_type);
436
437 if (size > (ULLONG_MAX - start))
438 size = ULLONG_MAX - start;
439
440 end = start + size;
441 printk(KERN_DEBUG "e820 update range: %016Lx - %016Lx ",
442 (unsigned long long) start,
443 (unsigned long long) end);
444 e820_print_type(old_type);
445 printk(KERN_CONT " ==> ");
446 e820_print_type(new_type);
447 printk(KERN_CONT "\n");
448
449 for (i = 0; i < e820x->nr_map; i++) {
450 struct e820entry *ei = &e820x->map[i];
451 u64 final_start, final_end;
452 u64 ei_end;
453
454 if (ei->type != old_type)
455 continue;
456
457 ei_end = ei->addr + ei->size;
458 /* totally covered by new range? */
459 if (ei->addr >= start && ei_end <= end) {
460 ei->type = new_type;
461 real_updated_size += ei->size;
462 continue;
463 }
464
465 /* new range is totally covered? */
466 if (ei->addr < start && ei_end > end) {
467 __e820_add_region(e820x, start, size, new_type);
468 __e820_add_region(e820x, end, ei_end - end, ei->type);
469 ei->size = start - ei->addr;
470 real_updated_size += size;
471 continue;
472 }
473
474 /* partially covered */
475 final_start = max(start, ei->addr);
476 final_end = min(end, ei_end);
477 if (final_start >= final_end)
478 continue;
479
480 __e820_add_region(e820x, final_start, final_end - final_start,
481 new_type);
482
483 real_updated_size += final_end - final_start;
484
485 /*
486 * left range could be head or tail, so need to update
487 * size at first.
488 */
489 ei->size -= final_end - final_start;
490 if (ei->addr < final_start)
491 continue;
492 ei->addr = final_end;
493 }
494 return real_updated_size;
495}
496
497u64 __init e820_update_range(u64 start, u64 size, unsigned old_type,
498 unsigned new_type)
499{
500 return __e820_update_range(&e820, start, size, old_type, new_type);
501}
502
503static u64 __init e820_update_range_saved(u64 start, u64 size,
504 unsigned old_type, unsigned new_type)
505{
506 return __e820_update_range(&e820_saved, start, size, old_type,
507 new_type);
508}
509
510/* make e820 not cover the range */
511u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
512 int checktype)
513{
514 int i;
515 u64 end;
516 u64 real_removed_size = 0;
517
518 if (size > (ULLONG_MAX - start))
519 size = ULLONG_MAX - start;
520
521 end = start + size;
522 printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ",
523 (unsigned long long) start,
524 (unsigned long long) end);
525 if (checktype)
526 e820_print_type(old_type);
527 printk(KERN_CONT "\n");
528
529 for (i = 0; i < e820.nr_map; i++) {
530 struct e820entry *ei = &e820.map[i];
531 u64 final_start, final_end;
532 u64 ei_end;
533
534 if (checktype && ei->type != old_type)
535 continue;
536
537 ei_end = ei->addr + ei->size;
538 /* totally covered? */
539 if (ei->addr >= start && ei_end <= end) {
540 real_removed_size += ei->size;
541 memset(ei, 0, sizeof(struct e820entry));
542 continue;
543 }
544
545 /* new range is totally covered? */
546 if (ei->addr < start && ei_end > end) {
547 e820_add_region(end, ei_end - end, ei->type);
548 ei->size = start - ei->addr;
549 real_removed_size += size;
550 continue;
551 }
552
553 /* partially covered */
554 final_start = max(start, ei->addr);
555 final_end = min(end, ei_end);
556 if (final_start >= final_end)
557 continue;
558 real_removed_size += final_end - final_start;
559
560 /*
561 * left range could be head or tail, so need to update
562 * size at first.
563 */
564 ei->size -= final_end - final_start;
565 if (ei->addr < final_start)
566 continue;
567 ei->addr = final_end;
568 }
569 return real_removed_size;
570}
571
572void __init update_e820(void)
573{
574 u32 nr_map;
575
576 nr_map = e820.nr_map;
577 if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map))
578 return;
579 e820.nr_map = nr_map;
580 printk(KERN_INFO "modified physical RAM map:\n");
581 e820_print_map("modified");
582}
583static void __init update_e820_saved(void)
584{
585 u32 nr_map;
586
587 nr_map = e820_saved.nr_map;
588 if (sanitize_e820_map(e820_saved.map, ARRAY_SIZE(e820_saved.map), &nr_map))
589 return;
590 e820_saved.nr_map = nr_map;
591}
592#define MAX_GAP_END 0x100000000ull
593/*
594 * Search for a gap in the e820 memory space from start_addr to end_addr.
595 */
596__init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
597 unsigned long start_addr, unsigned long long end_addr)
598{
599 unsigned long long last;
600 int i = e820.nr_map;
601 int found = 0;
602
603 last = (end_addr && end_addr < MAX_GAP_END) ? end_addr : MAX_GAP_END;
604
605 while (--i >= 0) {
606 unsigned long long start = e820.map[i].addr;
607 unsigned long long end = start + e820.map[i].size;
608
609 if (end < start_addr)
610 continue;
611
612 /*
613 * Since "last" is at most 4GB, we know we'll
614 * fit in 32 bits if this condition is true
615 */
616 if (last > end) {
617 unsigned long gap = last - end;
618
619 if (gap >= *gapsize) {
620 *gapsize = gap;
621 *gapstart = end;
622 found = 1;
623 }
624 }
625 if (start < last)
626 last = start;
627 }
628 return found;
629}
630
631/*
632 * Search for the biggest gap in the low 32 bits of the e820
633 * memory space. We pass this space to PCI to assign MMIO resources
634 * for hotplug or unconfigured devices in.
635 * Hopefully the BIOS let enough space left.
636 */
637__init void e820_setup_gap(void)
638{
639 unsigned long gapstart, gapsize;
640 int found;
641
642 gapstart = 0x10000000;
643 gapsize = 0x400000;
644 found = e820_search_gap(&gapstart, &gapsize, 0, MAX_GAP_END);
645
646#ifdef CONFIG_X86_64
647 if (!found) {
648 gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
649 printk(KERN_ERR
650 "PCI: Warning: Cannot find a gap in the 32bit address range\n"
651 "PCI: Unassigned devices with 32bit resource registers may break!\n");
652 }
653#endif
654
655 /*
656 * e820_reserve_resources_late protect stolen RAM already
657 */
658 pci_mem_start = gapstart;
659
660 printk(KERN_INFO
661 "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
662 pci_mem_start, gapstart, gapsize);
663}
664
665/**
666 * Because of the size limitation of struct boot_params, only first
667 * 128 E820 memory entries are passed to kernel via
668 * boot_params.e820_map, others are passed via SETUP_E820_EXT node of
669 * linked list of struct setup_data, which is parsed here.
670 */
671void __init parse_e820_ext(struct setup_data *sdata)
672{
673 int entries;
674 struct e820entry *extmap;
675
676 entries = sdata->len / sizeof(struct e820entry);
677 extmap = (struct e820entry *)(sdata->data);
678 __append_e820_map(extmap, entries);
679 sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
680 printk(KERN_INFO "extended physical RAM map:\n");
681 e820_print_map("extended");
682}
683
684#if defined(CONFIG_X86_64) || \
685 (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
686/**
687 * Find the ranges of physical addresses that do not correspond to
688 * e820 RAM areas and mark the corresponding pages as nosave for
689 * hibernation (32 bit) or software suspend and suspend to RAM (64 bit).
690 *
691 * This function requires the e820 map to be sorted and without any
692 * overlapping entries and assumes the first e820 area to be RAM.
693 */
694void __init e820_mark_nosave_regions(unsigned long limit_pfn)
695{
696 int i;
697 unsigned long pfn;
698
699 pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size);
700 for (i = 1; i < e820.nr_map; i++) {
701 struct e820entry *ei = &e820.map[i];
702
703 if (pfn < PFN_UP(ei->addr))
704 register_nosave_region(pfn, PFN_UP(ei->addr));
705
706 pfn = PFN_DOWN(ei->addr + ei->size);
707 if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN)
708 register_nosave_region(PFN_UP(ei->addr), pfn);
709
710 if (pfn >= limit_pfn)
711 break;
712 }
713}
714#endif
715
716#ifdef CONFIG_HIBERNATION
717/**
718 * Mark ACPI NVS memory region, so that we can save/restore it during
719 * hibernation and the subsequent resume.
720 */
721static int __init e820_mark_nvs_memory(void)
722{
723 int i;
724
725 for (i = 0; i < e820.nr_map; i++) {
726 struct e820entry *ei = &e820.map[i];
727
728 if (ei->type == E820_NVS)
729 suspend_nvs_register(ei->addr, ei->size);
730 }
731
732 return 0;
733}
734core_initcall(e820_mark_nvs_memory);
735#endif
736
737/*
738 * pre allocated 4k and reserved it in memblock and e820_saved
739 */
740u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
741{
742 u64 size = 0;
743 u64 addr;
744 u64 start;
745
746 for (start = startt; ; start += size) {
747 start = memblock_x86_find_in_range_size(start, &size, align);
748 if (start == MEMBLOCK_ERROR)
749 return 0;
750 if (size >= sizet)
751 break;
752 }
753
754#ifdef CONFIG_X86_32
755 if (start >= MAXMEM)
756 return 0;
757 if (start + size > MAXMEM)
758 size = MAXMEM - start;
759#endif
760
761 addr = round_down(start + size - sizet, align);
762 if (addr < start)
763 return 0;
764 memblock_x86_reserve_range(addr, addr + sizet, "new next");
765 e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
766 printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
767 update_e820_saved();
768
769 return addr;
770}
771
772#ifdef CONFIG_X86_32
773# ifdef CONFIG_X86_PAE
774# define MAX_ARCH_PFN (1ULL<<(36-PAGE_SHIFT))
775# else
776# define MAX_ARCH_PFN (1ULL<<(32-PAGE_SHIFT))
777# endif
778#else /* CONFIG_X86_32 */
779# define MAX_ARCH_PFN MAXMEM>>PAGE_SHIFT
780#endif
781
782/*
783 * Find the highest page frame number we have available
784 */
785static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
786{
787 int i;
788 unsigned long last_pfn = 0;
789 unsigned long max_arch_pfn = MAX_ARCH_PFN;
790
791 for (i = 0; i < e820.nr_map; i++) {
792 struct e820entry *ei = &e820.map[i];
793 unsigned long start_pfn;
794 unsigned long end_pfn;
795
796 if (ei->type != type)
797 continue;
798
799 start_pfn = ei->addr >> PAGE_SHIFT;
800 end_pfn = (ei->addr + ei->size) >> PAGE_SHIFT;
801
802 if (start_pfn >= limit_pfn)
803 continue;
804 if (end_pfn > limit_pfn) {
805 last_pfn = limit_pfn;
806 break;
807 }
808 if (end_pfn > last_pfn)
809 last_pfn = end_pfn;
810 }
811
812 if (last_pfn > max_arch_pfn)
813 last_pfn = max_arch_pfn;
814
815 printk(KERN_INFO "last_pfn = %#lx max_arch_pfn = %#lx\n",
816 last_pfn, max_arch_pfn);
817 return last_pfn;
818}
819unsigned long __init e820_end_of_ram_pfn(void)
820{
821 return e820_end_pfn(MAX_ARCH_PFN, E820_RAM);
822}
823
824unsigned long __init e820_end_of_low_ram_pfn(void)
825{
826 return e820_end_pfn(1UL<<(32 - PAGE_SHIFT), E820_RAM);
827}
828
829static void early_panic(char *msg)
830{
831 early_printk(msg);
832 panic(msg);
833}
834
835static int userdef __initdata;
836
837/* "mem=nopentium" disables the 4MB page tables. */
838static int __init parse_memopt(char *p)
839{
840 u64 mem_size;
841
842 if (!p)
843 return -EINVAL;
844
845 if (!strcmp(p, "nopentium")) {
846#ifdef CONFIG_X86_32
847 setup_clear_cpu_cap(X86_FEATURE_PSE);
848 return 0;
849#else
850 printk(KERN_WARNING "mem=nopentium ignored! (only supported on x86_32)\n");
851 return -EINVAL;
852#endif
853 }
854
855 userdef = 1;
856 mem_size = memparse(p, &p);
857 /* don't remove all of memory when handling "mem={invalid}" param */
858 if (mem_size == 0)
859 return -EINVAL;
860 e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
861
862 return 0;
863}
864early_param("mem", parse_memopt);
865
866static int __init parse_memmap_opt(char *p)
867{
868 char *oldp;
869 u64 start_at, mem_size;
870
871 if (!p)
872 return -EINVAL;
873
874 if (!strncmp(p, "exactmap", 8)) {
875#ifdef CONFIG_CRASH_DUMP
876 /*
877 * If we are doing a crash dump, we still need to know
878 * the real mem size before original memory map is
879 * reset.
880 */
881 saved_max_pfn = e820_end_of_ram_pfn();
882#endif
883 e820.nr_map = 0;
884 userdef = 1;
885 return 0;
886 }
887
888 oldp = p;
889 mem_size = memparse(p, &p);
890 if (p == oldp)
891 return -EINVAL;
892
893 userdef = 1;
894 if (*p == '@') {
895 start_at = memparse(p+1, &p);
896 e820_add_region(start_at, mem_size, E820_RAM);
897 } else if (*p == '#') {
898 start_at = memparse(p+1, &p);
899 e820_add_region(start_at, mem_size, E820_ACPI);
900 } else if (*p == '$') {
901 start_at = memparse(p+1, &p);
902 e820_add_region(start_at, mem_size, E820_RESERVED);
903 } else
904 e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
905
906 return *p == '\0' ? 0 : -EINVAL;
907}
908early_param("memmap", parse_memmap_opt);
909
910void __init finish_e820_parsing(void)
911{
912 if (userdef) {
913 u32 nr = e820.nr_map;
914
915 if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0)
916 early_panic("Invalid user supplied memory map");
917 e820.nr_map = nr;
918
919 printk(KERN_INFO "user-defined physical RAM map:\n");
920 e820_print_map("user");
921 }
922}
923
924static inline const char *e820_type_to_string(int e820_type)
925{
926 switch (e820_type) {
927 case E820_RESERVED_KERN:
928 case E820_RAM: return "System RAM";
929 case E820_ACPI: return "ACPI Tables";
930 case E820_NVS: return "ACPI Non-volatile Storage";
931 case E820_UNUSABLE: return "Unusable memory";
932 default: return "reserved";
933 }
934}
935
936/*
937 * Mark e820 reserved areas as busy for the resource manager.
938 */
939static struct resource __initdata *e820_res;
940void __init e820_reserve_resources(void)
941{
942 int i;
943 struct resource *res;
944 u64 end;
945
946 res = alloc_bootmem(sizeof(struct resource) * e820.nr_map);
947 e820_res = res;
948 for (i = 0; i < e820.nr_map; i++) {
949 end = e820.map[i].addr + e820.map[i].size - 1;
950 if (end != (resource_size_t)end) {
951 res++;
952 continue;
953 }
954 res->name = e820_type_to_string(e820.map[i].type);
955 res->start = e820.map[i].addr;
956 res->end = end;
957
958 res->flags = IORESOURCE_MEM;
959
960 /*
961 * don't register the region that could be conflicted with
962 * pci device BAR resource and insert them later in
963 * pcibios_resource_survey()
964 */
965 if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) {
966 res->flags |= IORESOURCE_BUSY;
967 insert_resource(&iomem_resource, res);
968 }
969 res++;
970 }
971
972 for (i = 0; i < e820_saved.nr_map; i++) {
973 struct e820entry *entry = &e820_saved.map[i];
974 firmware_map_add_early(entry->addr,
975 entry->addr + entry->size - 1,
976 e820_type_to_string(entry->type));
977 }
978}
979
980/* How much should we pad RAM ending depending on where it is? */
981static unsigned long ram_alignment(resource_size_t pos)
982{
983 unsigned long mb = pos >> 20;
984
985 /* To 64kB in the first megabyte */
986 if (!mb)
987 return 64*1024;
988
989 /* To 1MB in the first 16MB */
990 if (mb < 16)
991 return 1024*1024;
992
993 /* To 64MB for anything above that */
994 return 64*1024*1024;
995}
996
997#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
998
999void __init e820_reserve_resources_late(void)
1000{
1001 int i;
1002 struct resource *res;
1003
1004 res = e820_res;
1005 for (i = 0; i < e820.nr_map; i++) {
1006 if (!res->parent && res->end)
1007 insert_resource_expand_to_fit(&iomem_resource, res);
1008 res++;
1009 }
1010
1011 /*
1012 * Try to bump up RAM regions to reasonable boundaries to
1013 * avoid stolen RAM:
1014 */
1015 for (i = 0; i < e820.nr_map; i++) {
1016 struct e820entry *entry = &e820.map[i];
1017 u64 start, end;
1018
1019 if (entry->type != E820_RAM)
1020 continue;
1021 start = entry->addr + entry->size;
1022 end = round_up(start, ram_alignment(start)) - 1;
1023 if (end > MAX_RESOURCE_SIZE)
1024 end = MAX_RESOURCE_SIZE;
1025 if (start >= end)
1026 continue;
1027 printk(KERN_DEBUG "reserve RAM buffer: %016llx - %016llx ",
1028 start, end);
1029 reserve_region_with_split(&iomem_resource, start, end,
1030 "RAM buffer");
1031 }
1032}
1033
1034char *__init default_machine_specific_memory_setup(void)
1035{
1036 char *who = "BIOS-e820";
1037 u32 new_nr;
1038 /*
1039 * Try to copy the BIOS-supplied E820-map.
1040 *
1041 * Otherwise fake a memory map; one section from 0k->640k,
1042 * the next section from 1mb->appropriate_mem_k
1043 */
1044 new_nr = boot_params.e820_entries;
1045 sanitize_e820_map(boot_params.e820_map,
1046 ARRAY_SIZE(boot_params.e820_map),
1047 &new_nr);
1048 boot_params.e820_entries = new_nr;
1049 if (append_e820_map(boot_params.e820_map, boot_params.e820_entries)
1050 < 0) {
1051 u64 mem_size;
1052
1053 /* compare results from other methods and take the greater */
1054 if (boot_params.alt_mem_k
1055 < boot_params.screen_info.ext_mem_k) {
1056 mem_size = boot_params.screen_info.ext_mem_k;
1057 who = "BIOS-88";
1058 } else {
1059 mem_size = boot_params.alt_mem_k;
1060 who = "BIOS-e801";
1061 }
1062
1063 e820.nr_map = 0;
1064 e820_add_region(0, LOWMEMSIZE(), E820_RAM);
1065 e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
1066 }
1067
1068 /* In case someone cares... */
1069 return who;
1070}
1071
1072void __init setup_memory_map(void)
1073{
1074 char *who;
1075
1076 who = x86_init.resources.memory_setup();
1077 memcpy(&e820_saved, &e820, sizeof(struct e820map));
1078 printk(KERN_INFO "BIOS-provided physical RAM map:\n");
1079 e820_print_map(who);
1080}
1081
1082void __init memblock_x86_fill(void)
1083{
1084 int i;
1085 u64 end;
1086
1087 /*
1088 * EFI may have more than 128 entries
1089 * We are safe to enable resizing, beause memblock_x86_fill()
1090 * is rather later for x86
1091 */
1092 memblock_can_resize = 1;
1093
1094 for (i = 0; i < e820.nr_map; i++) {
1095 struct e820entry *ei = &e820.map[i];
1096
1097 end = ei->addr + ei->size;
1098 if (end != (resource_size_t)end)
1099 continue;
1100
1101 if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN)
1102 continue;
1103
1104 memblock_add(ei->addr, ei->size);
1105 }
1106
1107 memblock_analyze();
1108 memblock_dump_all();
1109}
1110
1111void __init memblock_find_dma_reserve(void)
1112{
1113#ifdef CONFIG_X86_64
1114 u64 free_size_pfn;
1115 u64 mem_size_pfn;
1116 /*
1117 * need to find out used area below MAX_DMA_PFN
1118 * need to use memblock to get free size in [0, MAX_DMA_PFN]
1119 * at first, and assume boot_mem will not take below MAX_DMA_PFN
1120 */
1121 mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
1122 free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
1123 set_dma_reserve(mem_size_pfn - free_size_pfn);
1124#endif
1125}
1/*
2 * Handle the memory map.
3 * The functions here do the job until bootmem takes over.
4 *
5 * Getting sanitize_e820_map() in sync with i386 version by applying change:
6 * - Provisions for empty E820 memory regions (reported by certain BIOSes).
7 * Alex Achenbach <xela@slit.de>, December 2002.
8 * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
9 *
10 */
11#include <linux/kernel.h>
12#include <linux/types.h>
13#include <linux/init.h>
14#include <linux/crash_dump.h>
15#include <linux/export.h>
16#include <linux/bootmem.h>
17#include <linux/pfn.h>
18#include <linux/suspend.h>
19#include <linux/acpi.h>
20#include <linux/firmware-map.h>
21#include <linux/memblock.h>
22#include <linux/sort.h>
23
24#include <asm/e820.h>
25#include <asm/proto.h>
26#include <asm/setup.h>
27#include <asm/cpufeature.h>
28
29/*
30 * The e820 map is the map that gets modified e.g. with command line parameters
31 * and that is also registered with modifications in the kernel resource tree
32 * with the iomem_resource as parent.
33 *
34 * The e820_saved is directly saved after the BIOS-provided memory map is
35 * copied. It doesn't get modified afterwards. It's registered for the
36 * /sys/firmware/memmap interface.
37 *
38 * That memory map is not modified and is used as base for kexec. The kexec'd
39 * kernel should get the same memory map as the firmware provides. Then the
40 * user can e.g. boot the original kernel with mem=1G while still booting the
41 * next kernel with full memory.
42 */
43struct e820map e820;
44struct e820map e820_saved;
45
46/* For PCI or other memory-mapped resources */
47unsigned long pci_mem_start = 0xaeedbabe;
48#ifdef CONFIG_PCI
49EXPORT_SYMBOL(pci_mem_start);
50#endif
51
52/*
53 * This function checks if any part of the range <start,end> is mapped
54 * with type.
55 */
56int
57e820_any_mapped(u64 start, u64 end, unsigned type)
58{
59 int i;
60
61 for (i = 0; i < e820.nr_map; i++) {
62 struct e820entry *ei = &e820.map[i];
63
64 if (type && ei->type != type)
65 continue;
66 if (ei->addr >= end || ei->addr + ei->size <= start)
67 continue;
68 return 1;
69 }
70 return 0;
71}
72EXPORT_SYMBOL_GPL(e820_any_mapped);
73
74/*
75 * This function checks if the entire range <start,end> is mapped with type.
76 *
77 * Note: this function only works correct if the e820 table is sorted and
78 * not-overlapping, which is the case
79 */
80int __init e820_all_mapped(u64 start, u64 end, unsigned type)
81{
82 int i;
83
84 for (i = 0; i < e820.nr_map; i++) {
85 struct e820entry *ei = &e820.map[i];
86
87 if (type && ei->type != type)
88 continue;
89 /* is the region (part) in overlap with the current region ?*/
90 if (ei->addr >= end || ei->addr + ei->size <= start)
91 continue;
92
93 /* if the region is at the beginning of <start,end> we move
94 * start to the end of the region since it's ok until there
95 */
96 if (ei->addr <= start)
97 start = ei->addr + ei->size;
98 /*
99 * if start is now at or beyond end, we're done, full
100 * coverage
101 */
102 if (start >= end)
103 return 1;
104 }
105 return 0;
106}
107
108/*
109 * Add a memory region to the kernel e820 map.
110 */
111static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
112 int type)
113{
114 int x = e820x->nr_map;
115
116 if (x >= ARRAY_SIZE(e820x->map)) {
117 printk(KERN_ERR "e820: too many entries; ignoring [mem %#010llx-%#010llx]\n",
118 (unsigned long long) start,
119 (unsigned long long) (start + size - 1));
120 return;
121 }
122
123 e820x->map[x].addr = start;
124 e820x->map[x].size = size;
125 e820x->map[x].type = type;
126 e820x->nr_map++;
127}
128
129void __init e820_add_region(u64 start, u64 size, int type)
130{
131 __e820_add_region(&e820, start, size, type);
132}
133
134static void __init e820_print_type(u32 type)
135{
136 switch (type) {
137 case E820_RAM:
138 case E820_RESERVED_KERN:
139 printk(KERN_CONT "usable");
140 break;
141 case E820_RESERVED:
142 printk(KERN_CONT "reserved");
143 break;
144 case E820_ACPI:
145 printk(KERN_CONT "ACPI data");
146 break;
147 case E820_NVS:
148 printk(KERN_CONT "ACPI NVS");
149 break;
150 case E820_UNUSABLE:
151 printk(KERN_CONT "unusable");
152 break;
153 case E820_PMEM:
154 case E820_PRAM:
155 printk(KERN_CONT "persistent (type %u)", type);
156 break;
157 default:
158 printk(KERN_CONT "type %u", type);
159 break;
160 }
161}
162
163void __init e820_print_map(char *who)
164{
165 int i;
166
167 for (i = 0; i < e820.nr_map; i++) {
168 printk(KERN_INFO "%s: [mem %#018Lx-%#018Lx] ", who,
169 (unsigned long long) e820.map[i].addr,
170 (unsigned long long)
171 (e820.map[i].addr + e820.map[i].size - 1));
172 e820_print_type(e820.map[i].type);
173 printk(KERN_CONT "\n");
174 }
175}
176
177/*
178 * Sanitize the BIOS e820 map.
179 *
180 * Some e820 responses include overlapping entries. The following
181 * replaces the original e820 map with a new one, removing overlaps,
182 * and resolving conflicting memory types in favor of highest
183 * numbered type.
184 *
185 * The input parameter biosmap points to an array of 'struct
186 * e820entry' which on entry has elements in the range [0, *pnr_map)
187 * valid, and which has space for up to max_nr_map entries.
188 * On return, the resulting sanitized e820 map entries will be in
189 * overwritten in the same location, starting at biosmap.
190 *
191 * The integer pointed to by pnr_map must be valid on entry (the
192 * current number of valid entries located at biosmap). If the
193 * sanitizing succeeds the *pnr_map will be updated with the new
194 * number of valid entries (something no more than max_nr_map).
195 *
196 * The return value from sanitize_e820_map() is zero if it
197 * successfully 'sanitized' the map entries passed in, and is -1
198 * if it did nothing, which can happen if either of (1) it was
199 * only passed one map entry, or (2) any of the input map entries
200 * were invalid (start + size < start, meaning that the size was
201 * so big the described memory range wrapped around through zero.)
202 *
203 * Visually we're performing the following
204 * (1,2,3,4 = memory types)...
205 *
206 * Sample memory map (w/overlaps):
207 * ____22__________________
208 * ______________________4_
209 * ____1111________________
210 * _44_____________________
211 * 11111111________________
212 * ____________________33__
213 * ___________44___________
214 * __________33333_________
215 * ______________22________
216 * ___________________2222_
217 * _________111111111______
218 * _____________________11_
219 * _________________4______
220 *
221 * Sanitized equivalent (no overlap):
222 * 1_______________________
223 * _44_____________________
224 * ___1____________________
225 * ____22__________________
226 * ______11________________
227 * _________1______________
228 * __________3_____________
229 * ___________44___________
230 * _____________33_________
231 * _______________2________
232 * ________________1_______
233 * _________________4______
234 * ___________________2____
235 * ____________________33__
236 * ______________________4_
237 */
238struct change_member {
239 struct e820entry *pbios; /* pointer to original bios entry */
240 unsigned long long addr; /* address for this change point */
241};
242
243static int __init cpcompare(const void *a, const void *b)
244{
245 struct change_member * const *app = a, * const *bpp = b;
246 const struct change_member *ap = *app, *bp = *bpp;
247
248 /*
249 * Inputs are pointers to two elements of change_point[]. If their
250 * addresses are unequal, their difference dominates. If the addresses
251 * are equal, then consider one that represents the end of its region
252 * to be greater than one that does not.
253 */
254 if (ap->addr != bp->addr)
255 return ap->addr > bp->addr ? 1 : -1;
256
257 return (ap->addr != ap->pbios->addr) - (bp->addr != bp->pbios->addr);
258}
259
260int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map,
261 u32 *pnr_map)
262{
263 static struct change_member change_point_list[2*E820_X_MAX] __initdata;
264 static struct change_member *change_point[2*E820_X_MAX] __initdata;
265 static struct e820entry *overlap_list[E820_X_MAX] __initdata;
266 static struct e820entry new_bios[E820_X_MAX] __initdata;
267 unsigned long current_type, last_type;
268 unsigned long long last_addr;
269 int chgidx;
270 int overlap_entries;
271 int new_bios_entry;
272 int old_nr, new_nr, chg_nr;
273 int i;
274
275 /* if there's only one memory region, don't bother */
276 if (*pnr_map < 2)
277 return -1;
278
279 old_nr = *pnr_map;
280 BUG_ON(old_nr > max_nr_map);
281
282 /* bail out if we find any unreasonable addresses in bios map */
283 for (i = 0; i < old_nr; i++)
284 if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
285 return -1;
286
287 /* create pointers for initial change-point information (for sorting) */
288 for (i = 0; i < 2 * old_nr; i++)
289 change_point[i] = &change_point_list[i];
290
291 /* record all known change-points (starting and ending addresses),
292 omitting those that are for empty memory regions */
293 chgidx = 0;
294 for (i = 0; i < old_nr; i++) {
295 if (biosmap[i].size != 0) {
296 change_point[chgidx]->addr = biosmap[i].addr;
297 change_point[chgidx++]->pbios = &biosmap[i];
298 change_point[chgidx]->addr = biosmap[i].addr +
299 biosmap[i].size;
300 change_point[chgidx++]->pbios = &biosmap[i];
301 }
302 }
303 chg_nr = chgidx;
304
305 /* sort change-point list by memory addresses (low -> high) */
306 sort(change_point, chg_nr, sizeof *change_point, cpcompare, NULL);
307
308 /* create a new bios memory map, removing overlaps */
309 overlap_entries = 0; /* number of entries in the overlap table */
310 new_bios_entry = 0; /* index for creating new bios map entries */
311 last_type = 0; /* start with undefined memory type */
312 last_addr = 0; /* start with 0 as last starting address */
313
314 /* loop through change-points, determining affect on the new bios map */
315 for (chgidx = 0; chgidx < chg_nr; chgidx++) {
316 /* keep track of all overlapping bios entries */
317 if (change_point[chgidx]->addr ==
318 change_point[chgidx]->pbios->addr) {
319 /*
320 * add map entry to overlap list (> 1 entry
321 * implies an overlap)
322 */
323 overlap_list[overlap_entries++] =
324 change_point[chgidx]->pbios;
325 } else {
326 /*
327 * remove entry from list (order independent,
328 * so swap with last)
329 */
330 for (i = 0; i < overlap_entries; i++) {
331 if (overlap_list[i] ==
332 change_point[chgidx]->pbios)
333 overlap_list[i] =
334 overlap_list[overlap_entries-1];
335 }
336 overlap_entries--;
337 }
338 /*
339 * if there are overlapping entries, decide which
340 * "type" to use (larger value takes precedence --
341 * 1=usable, 2,3,4,4+=unusable)
342 */
343 current_type = 0;
344 for (i = 0; i < overlap_entries; i++)
345 if (overlap_list[i]->type > current_type)
346 current_type = overlap_list[i]->type;
347 /*
348 * continue building up new bios map based on this
349 * information
350 */
351 if (current_type != last_type || current_type == E820_PRAM) {
352 if (last_type != 0) {
353 new_bios[new_bios_entry].size =
354 change_point[chgidx]->addr - last_addr;
355 /*
356 * move forward only if the new size
357 * was non-zero
358 */
359 if (new_bios[new_bios_entry].size != 0)
360 /*
361 * no more space left for new
362 * bios entries ?
363 */
364 if (++new_bios_entry >= max_nr_map)
365 break;
366 }
367 if (current_type != 0) {
368 new_bios[new_bios_entry].addr =
369 change_point[chgidx]->addr;
370 new_bios[new_bios_entry].type = current_type;
371 last_addr = change_point[chgidx]->addr;
372 }
373 last_type = current_type;
374 }
375 }
376 /* retain count for new bios entries */
377 new_nr = new_bios_entry;
378
379 /* copy new bios mapping into original location */
380 memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
381 *pnr_map = new_nr;
382
383 return 0;
384}
385
386static int __init __append_e820_map(struct e820entry *biosmap, int nr_map)
387{
388 while (nr_map) {
389 u64 start = biosmap->addr;
390 u64 size = biosmap->size;
391 u64 end = start + size;
392 u32 type = biosmap->type;
393
394 /* Overflow in 64 bits? Ignore the memory map. */
395 if (start > end)
396 return -1;
397
398 e820_add_region(start, size, type);
399
400 biosmap++;
401 nr_map--;
402 }
403 return 0;
404}
405
406/*
407 * Copy the BIOS e820 map into a safe place.
408 *
409 * Sanity-check it while we're at it..
410 *
411 * If we're lucky and live on a modern system, the setup code
412 * will have given us a memory map that we can use to properly
413 * set up memory. If we aren't, we'll fake a memory map.
414 */
415static int __init append_e820_map(struct e820entry *biosmap, int nr_map)
416{
417 /* Only one memory region (or negative)? Ignore it */
418 if (nr_map < 2)
419 return -1;
420
421 return __append_e820_map(biosmap, nr_map);
422}
423
424static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
425 u64 size, unsigned old_type,
426 unsigned new_type)
427{
428 u64 end;
429 unsigned int i;
430 u64 real_updated_size = 0;
431
432 BUG_ON(old_type == new_type);
433
434 if (size > (ULLONG_MAX - start))
435 size = ULLONG_MAX - start;
436
437 end = start + size;
438 printk(KERN_DEBUG "e820: update [mem %#010Lx-%#010Lx] ",
439 (unsigned long long) start, (unsigned long long) (end - 1));
440 e820_print_type(old_type);
441 printk(KERN_CONT " ==> ");
442 e820_print_type(new_type);
443 printk(KERN_CONT "\n");
444
445 for (i = 0; i < e820x->nr_map; i++) {
446 struct e820entry *ei = &e820x->map[i];
447 u64 final_start, final_end;
448 u64 ei_end;
449
450 if (ei->type != old_type)
451 continue;
452
453 ei_end = ei->addr + ei->size;
454 /* totally covered by new range? */
455 if (ei->addr >= start && ei_end <= end) {
456 ei->type = new_type;
457 real_updated_size += ei->size;
458 continue;
459 }
460
461 /* new range is totally covered? */
462 if (ei->addr < start && ei_end > end) {
463 __e820_add_region(e820x, start, size, new_type);
464 __e820_add_region(e820x, end, ei_end - end, ei->type);
465 ei->size = start - ei->addr;
466 real_updated_size += size;
467 continue;
468 }
469
470 /* partially covered */
471 final_start = max(start, ei->addr);
472 final_end = min(end, ei_end);
473 if (final_start >= final_end)
474 continue;
475
476 __e820_add_region(e820x, final_start, final_end - final_start,
477 new_type);
478
479 real_updated_size += final_end - final_start;
480
481 /*
482 * left range could be head or tail, so need to update
483 * size at first.
484 */
485 ei->size -= final_end - final_start;
486 if (ei->addr < final_start)
487 continue;
488 ei->addr = final_end;
489 }
490 return real_updated_size;
491}
492
493u64 __init e820_update_range(u64 start, u64 size, unsigned old_type,
494 unsigned new_type)
495{
496 return __e820_update_range(&e820, start, size, old_type, new_type);
497}
498
499static u64 __init e820_update_range_saved(u64 start, u64 size,
500 unsigned old_type, unsigned new_type)
501{
502 return __e820_update_range(&e820_saved, start, size, old_type,
503 new_type);
504}
505
506/* make e820 not cover the range */
507u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
508 int checktype)
509{
510 int i;
511 u64 end;
512 u64 real_removed_size = 0;
513
514 if (size > (ULLONG_MAX - start))
515 size = ULLONG_MAX - start;
516
517 end = start + size;
518 printk(KERN_DEBUG "e820: remove [mem %#010Lx-%#010Lx] ",
519 (unsigned long long) start, (unsigned long long) (end - 1));
520 if (checktype)
521 e820_print_type(old_type);
522 printk(KERN_CONT "\n");
523
524 for (i = 0; i < e820.nr_map; i++) {
525 struct e820entry *ei = &e820.map[i];
526 u64 final_start, final_end;
527 u64 ei_end;
528
529 if (checktype && ei->type != old_type)
530 continue;
531
532 ei_end = ei->addr + ei->size;
533 /* totally covered? */
534 if (ei->addr >= start && ei_end <= end) {
535 real_removed_size += ei->size;
536 memset(ei, 0, sizeof(struct e820entry));
537 continue;
538 }
539
540 /* new range is totally covered? */
541 if (ei->addr < start && ei_end > end) {
542 e820_add_region(end, ei_end - end, ei->type);
543 ei->size = start - ei->addr;
544 real_removed_size += size;
545 continue;
546 }
547
548 /* partially covered */
549 final_start = max(start, ei->addr);
550 final_end = min(end, ei_end);
551 if (final_start >= final_end)
552 continue;
553 real_removed_size += final_end - final_start;
554
555 /*
556 * left range could be head or tail, so need to update
557 * size at first.
558 */
559 ei->size -= final_end - final_start;
560 if (ei->addr < final_start)
561 continue;
562 ei->addr = final_end;
563 }
564 return real_removed_size;
565}
566
567void __init update_e820(void)
568{
569 if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map))
570 return;
571 printk(KERN_INFO "e820: modified physical RAM map:\n");
572 e820_print_map("modified");
573}
574static void __init update_e820_saved(void)
575{
576 sanitize_e820_map(e820_saved.map, ARRAY_SIZE(e820_saved.map),
577 &e820_saved.nr_map);
578}
579#define MAX_GAP_END 0x100000000ull
580/*
581 * Search for a gap in the e820 memory space from start_addr to end_addr.
582 */
583__init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
584 unsigned long start_addr, unsigned long long end_addr)
585{
586 unsigned long long last;
587 int i = e820.nr_map;
588 int found = 0;
589
590 last = (end_addr && end_addr < MAX_GAP_END) ? end_addr : MAX_GAP_END;
591
592 while (--i >= 0) {
593 unsigned long long start = e820.map[i].addr;
594 unsigned long long end = start + e820.map[i].size;
595
596 if (end < start_addr)
597 continue;
598
599 /*
600 * Since "last" is at most 4GB, we know we'll
601 * fit in 32 bits if this condition is true
602 */
603 if (last > end) {
604 unsigned long gap = last - end;
605
606 if (gap >= *gapsize) {
607 *gapsize = gap;
608 *gapstart = end;
609 found = 1;
610 }
611 }
612 if (start < last)
613 last = start;
614 }
615 return found;
616}
617
618/*
619 * Search for the biggest gap in the low 32 bits of the e820
620 * memory space. We pass this space to PCI to assign MMIO resources
621 * for hotplug or unconfigured devices in.
622 * Hopefully the BIOS let enough space left.
623 */
624__init void e820_setup_gap(void)
625{
626 unsigned long gapstart, gapsize;
627 int found;
628
629 gapstart = 0x10000000;
630 gapsize = 0x400000;
631 found = e820_search_gap(&gapstart, &gapsize, 0, MAX_GAP_END);
632
633#ifdef CONFIG_X86_64
634 if (!found) {
635 gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
636 printk(KERN_ERR
637 "e820: cannot find a gap in the 32bit address range\n"
638 "e820: PCI devices with unassigned 32bit BARs may break!\n");
639 }
640#endif
641
642 /*
643 * e820_reserve_resources_late protect stolen RAM already
644 */
645 pci_mem_start = gapstart;
646
647 printk(KERN_INFO
648 "e820: [mem %#010lx-%#010lx] available for PCI devices\n",
649 gapstart, gapstart + gapsize - 1);
650}
651
652/**
653 * Because of the size limitation of struct boot_params, only first
654 * 128 E820 memory entries are passed to kernel via
655 * boot_params.e820_map, others are passed via SETUP_E820_EXT node of
656 * linked list of struct setup_data, which is parsed here.
657 */
658void __init parse_e820_ext(u64 phys_addr, u32 data_len)
659{
660 int entries;
661 struct e820entry *extmap;
662 struct setup_data *sdata;
663
664 sdata = early_memremap(phys_addr, data_len);
665 entries = sdata->len / sizeof(struct e820entry);
666 extmap = (struct e820entry *)(sdata->data);
667 __append_e820_map(extmap, entries);
668 sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
669 early_memunmap(sdata, data_len);
670 printk(KERN_INFO "e820: extended physical RAM map:\n");
671 e820_print_map("extended");
672}
673
674#if defined(CONFIG_X86_64) || \
675 (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
676/**
677 * Find the ranges of physical addresses that do not correspond to
678 * e820 RAM areas and mark the corresponding pages as nosave for
679 * hibernation (32 bit) or software suspend and suspend to RAM (64 bit).
680 *
681 * This function requires the e820 map to be sorted and without any
682 * overlapping entries.
683 */
684void __init e820_mark_nosave_regions(unsigned long limit_pfn)
685{
686 int i;
687 unsigned long pfn = 0;
688
689 for (i = 0; i < e820.nr_map; i++) {
690 struct e820entry *ei = &e820.map[i];
691
692 if (pfn < PFN_UP(ei->addr))
693 register_nosave_region(pfn, PFN_UP(ei->addr));
694
695 pfn = PFN_DOWN(ei->addr + ei->size);
696
697 if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN)
698 register_nosave_region(PFN_UP(ei->addr), pfn);
699
700 if (pfn >= limit_pfn)
701 break;
702 }
703}
704#endif
705
706#ifdef CONFIG_ACPI
707/**
708 * Mark ACPI NVS memory region, so that we can save/restore it during
709 * hibernation and the subsequent resume.
710 */
711static int __init e820_mark_nvs_memory(void)
712{
713 int i;
714
715 for (i = 0; i < e820.nr_map; i++) {
716 struct e820entry *ei = &e820.map[i];
717
718 if (ei->type == E820_NVS)
719 acpi_nvs_register(ei->addr, ei->size);
720 }
721
722 return 0;
723}
724core_initcall(e820_mark_nvs_memory);
725#endif
726
727/*
728 * pre allocated 4k and reserved it in memblock and e820_saved
729 */
730u64 __init early_reserve_e820(u64 size, u64 align)
731{
732 u64 addr;
733
734 addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
735 if (addr) {
736 e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED);
737 printk(KERN_INFO "e820: update e820_saved for early_reserve_e820\n");
738 update_e820_saved();
739 }
740
741 return addr;
742}
743
744#ifdef CONFIG_X86_32
745# ifdef CONFIG_X86_PAE
746# define MAX_ARCH_PFN (1ULL<<(36-PAGE_SHIFT))
747# else
748# define MAX_ARCH_PFN (1ULL<<(32-PAGE_SHIFT))
749# endif
750#else /* CONFIG_X86_32 */
751# define MAX_ARCH_PFN MAXMEM>>PAGE_SHIFT
752#endif
753
754/*
755 * Find the highest page frame number we have available
756 */
757static unsigned long __init e820_end_pfn(unsigned long limit_pfn)
758{
759 int i;
760 unsigned long last_pfn = 0;
761 unsigned long max_arch_pfn = MAX_ARCH_PFN;
762
763 for (i = 0; i < e820.nr_map; i++) {
764 struct e820entry *ei = &e820.map[i];
765 unsigned long start_pfn;
766 unsigned long end_pfn;
767
768 /*
769 * Persistent memory is accounted as ram for purposes of
770 * establishing max_pfn and mem_map.
771 */
772 if (ei->type != E820_RAM && ei->type != E820_PRAM)
773 continue;
774
775 start_pfn = ei->addr >> PAGE_SHIFT;
776 end_pfn = (ei->addr + ei->size) >> PAGE_SHIFT;
777
778 if (start_pfn >= limit_pfn)
779 continue;
780 if (end_pfn > limit_pfn) {
781 last_pfn = limit_pfn;
782 break;
783 }
784 if (end_pfn > last_pfn)
785 last_pfn = end_pfn;
786 }
787
788 if (last_pfn > max_arch_pfn)
789 last_pfn = max_arch_pfn;
790
791 printk(KERN_INFO "e820: last_pfn = %#lx max_arch_pfn = %#lx\n",
792 last_pfn, max_arch_pfn);
793 return last_pfn;
794}
795unsigned long __init e820_end_of_ram_pfn(void)
796{
797 return e820_end_pfn(MAX_ARCH_PFN);
798}
799
800unsigned long __init e820_end_of_low_ram_pfn(void)
801{
802 return e820_end_pfn(1UL << (32-PAGE_SHIFT));
803}
804
805static void early_panic(char *msg)
806{
807 early_printk(msg);
808 panic(msg);
809}
810
811static int userdef __initdata;
812
813/* "mem=nopentium" disables the 4MB page tables. */
814static int __init parse_memopt(char *p)
815{
816 u64 mem_size;
817
818 if (!p)
819 return -EINVAL;
820
821 if (!strcmp(p, "nopentium")) {
822#ifdef CONFIG_X86_32
823 setup_clear_cpu_cap(X86_FEATURE_PSE);
824 return 0;
825#else
826 printk(KERN_WARNING "mem=nopentium ignored! (only supported on x86_32)\n");
827 return -EINVAL;
828#endif
829 }
830
831 userdef = 1;
832 mem_size = memparse(p, &p);
833 /* don't remove all of memory when handling "mem={invalid}" param */
834 if (mem_size == 0)
835 return -EINVAL;
836 e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
837
838 return 0;
839}
840early_param("mem", parse_memopt);
841
842static int __init parse_memmap_one(char *p)
843{
844 char *oldp;
845 u64 start_at, mem_size;
846
847 if (!p)
848 return -EINVAL;
849
850 if (!strncmp(p, "exactmap", 8)) {
851#ifdef CONFIG_CRASH_DUMP
852 /*
853 * If we are doing a crash dump, we still need to know
854 * the real mem size before original memory map is
855 * reset.
856 */
857 saved_max_pfn = e820_end_of_ram_pfn();
858#endif
859 e820.nr_map = 0;
860 userdef = 1;
861 return 0;
862 }
863
864 oldp = p;
865 mem_size = memparse(p, &p);
866 if (p == oldp)
867 return -EINVAL;
868
869 userdef = 1;
870 if (*p == '@') {
871 start_at = memparse(p+1, &p);
872 e820_add_region(start_at, mem_size, E820_RAM);
873 } else if (*p == '#') {
874 start_at = memparse(p+1, &p);
875 e820_add_region(start_at, mem_size, E820_ACPI);
876 } else if (*p == '$') {
877 start_at = memparse(p+1, &p);
878 e820_add_region(start_at, mem_size, E820_RESERVED);
879 } else if (*p == '!') {
880 start_at = memparse(p+1, &p);
881 e820_add_region(start_at, mem_size, E820_PRAM);
882 } else
883 e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
884
885 return *p == '\0' ? 0 : -EINVAL;
886}
887static int __init parse_memmap_opt(char *str)
888{
889 while (str) {
890 char *k = strchr(str, ',');
891
892 if (k)
893 *k++ = 0;
894
895 parse_memmap_one(str);
896 str = k;
897 }
898
899 return 0;
900}
901early_param("memmap", parse_memmap_opt);
902
903void __init finish_e820_parsing(void)
904{
905 if (userdef) {
906 if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map),
907 &e820.nr_map) < 0)
908 early_panic("Invalid user supplied memory map");
909
910 printk(KERN_INFO "e820: user-defined physical RAM map:\n");
911 e820_print_map("user");
912 }
913}
914
915static const char *e820_type_to_string(int e820_type)
916{
917 switch (e820_type) {
918 case E820_RESERVED_KERN:
919 case E820_RAM: return "System RAM";
920 case E820_ACPI: return "ACPI Tables";
921 case E820_NVS: return "ACPI Non-volatile Storage";
922 case E820_UNUSABLE: return "Unusable memory";
923 case E820_PRAM: return "Persistent Memory (legacy)";
924 case E820_PMEM: return "Persistent Memory";
925 default: return "reserved";
926 }
927}
928
929static unsigned long e820_type_to_iomem_type(int e820_type)
930{
931 switch (e820_type) {
932 case E820_RESERVED_KERN:
933 case E820_RAM:
934 return IORESOURCE_SYSTEM_RAM;
935 case E820_ACPI:
936 case E820_NVS:
937 case E820_UNUSABLE:
938 case E820_PRAM:
939 case E820_PMEM:
940 default:
941 return IORESOURCE_MEM;
942 }
943}
944
945static unsigned long e820_type_to_iores_desc(int e820_type)
946{
947 switch (e820_type) {
948 case E820_ACPI:
949 return IORES_DESC_ACPI_TABLES;
950 case E820_NVS:
951 return IORES_DESC_ACPI_NV_STORAGE;
952 case E820_PMEM:
953 return IORES_DESC_PERSISTENT_MEMORY;
954 case E820_PRAM:
955 return IORES_DESC_PERSISTENT_MEMORY_LEGACY;
956 case E820_RESERVED_KERN:
957 case E820_RAM:
958 case E820_UNUSABLE:
959 default:
960 return IORES_DESC_NONE;
961 }
962}
963
964static bool do_mark_busy(u32 type, struct resource *res)
965{
966 /* this is the legacy bios/dos rom-shadow + mmio region */
967 if (res->start < (1ULL<<20))
968 return true;
969
970 /*
971 * Treat persistent memory like device memory, i.e. reserve it
972 * for exclusive use of a driver
973 */
974 switch (type) {
975 case E820_RESERVED:
976 case E820_PRAM:
977 case E820_PMEM:
978 return false;
979 default:
980 return true;
981 }
982}
983
984/*
985 * Mark e820 reserved areas as busy for the resource manager.
986 */
987static struct resource __initdata *e820_res;
988void __init e820_reserve_resources(void)
989{
990 int i;
991 struct resource *res;
992 u64 end;
993
994 res = alloc_bootmem(sizeof(struct resource) * e820.nr_map);
995 e820_res = res;
996 for (i = 0; i < e820.nr_map; i++) {
997 end = e820.map[i].addr + e820.map[i].size - 1;
998 if (end != (resource_size_t)end) {
999 res++;
1000 continue;
1001 }
1002 res->name = e820_type_to_string(e820.map[i].type);
1003 res->start = e820.map[i].addr;
1004 res->end = end;
1005
1006 res->flags = e820_type_to_iomem_type(e820.map[i].type);
1007 res->desc = e820_type_to_iores_desc(e820.map[i].type);
1008
1009 /*
1010 * don't register the region that could be conflicted with
1011 * pci device BAR resource and insert them later in
1012 * pcibios_resource_survey()
1013 */
1014 if (do_mark_busy(e820.map[i].type, res)) {
1015 res->flags |= IORESOURCE_BUSY;
1016 insert_resource(&iomem_resource, res);
1017 }
1018 res++;
1019 }
1020
1021 for (i = 0; i < e820_saved.nr_map; i++) {
1022 struct e820entry *entry = &e820_saved.map[i];
1023 firmware_map_add_early(entry->addr,
1024 entry->addr + entry->size,
1025 e820_type_to_string(entry->type));
1026 }
1027}
1028
1029/* How much should we pad RAM ending depending on where it is? */
1030static unsigned long ram_alignment(resource_size_t pos)
1031{
1032 unsigned long mb = pos >> 20;
1033
1034 /* To 64kB in the first megabyte */
1035 if (!mb)
1036 return 64*1024;
1037
1038 /* To 1MB in the first 16MB */
1039 if (mb < 16)
1040 return 1024*1024;
1041
1042 /* To 64MB for anything above that */
1043 return 64*1024*1024;
1044}
1045
1046#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
1047
1048void __init e820_reserve_resources_late(void)
1049{
1050 int i;
1051 struct resource *res;
1052
1053 res = e820_res;
1054 for (i = 0; i < e820.nr_map; i++) {
1055 if (!res->parent && res->end)
1056 insert_resource_expand_to_fit(&iomem_resource, res);
1057 res++;
1058 }
1059
1060 /*
1061 * Try to bump up RAM regions to reasonable boundaries to
1062 * avoid stolen RAM:
1063 */
1064 for (i = 0; i < e820.nr_map; i++) {
1065 struct e820entry *entry = &e820.map[i];
1066 u64 start, end;
1067
1068 if (entry->type != E820_RAM)
1069 continue;
1070 start = entry->addr + entry->size;
1071 end = round_up(start, ram_alignment(start)) - 1;
1072 if (end > MAX_RESOURCE_SIZE)
1073 end = MAX_RESOURCE_SIZE;
1074 if (start >= end)
1075 continue;
1076 printk(KERN_DEBUG
1077 "e820: reserve RAM buffer [mem %#010llx-%#010llx]\n",
1078 start, end);
1079 reserve_region_with_split(&iomem_resource, start, end,
1080 "RAM buffer");
1081 }
1082}
1083
1084char *__init default_machine_specific_memory_setup(void)
1085{
1086 char *who = "BIOS-e820";
1087 u32 new_nr;
1088 /*
1089 * Try to copy the BIOS-supplied E820-map.
1090 *
1091 * Otherwise fake a memory map; one section from 0k->640k,
1092 * the next section from 1mb->appropriate_mem_k
1093 */
1094 new_nr = boot_params.e820_entries;
1095 sanitize_e820_map(boot_params.e820_map,
1096 ARRAY_SIZE(boot_params.e820_map),
1097 &new_nr);
1098 boot_params.e820_entries = new_nr;
1099 if (append_e820_map(boot_params.e820_map, boot_params.e820_entries)
1100 < 0) {
1101 u64 mem_size;
1102
1103 /* compare results from other methods and take the greater */
1104 if (boot_params.alt_mem_k
1105 < boot_params.screen_info.ext_mem_k) {
1106 mem_size = boot_params.screen_info.ext_mem_k;
1107 who = "BIOS-88";
1108 } else {
1109 mem_size = boot_params.alt_mem_k;
1110 who = "BIOS-e801";
1111 }
1112
1113 e820.nr_map = 0;
1114 e820_add_region(0, LOWMEMSIZE(), E820_RAM);
1115 e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
1116 }
1117
1118 /* In case someone cares... */
1119 return who;
1120}
1121
1122void __init setup_memory_map(void)
1123{
1124 char *who;
1125
1126 who = x86_init.resources.memory_setup();
1127 memcpy(&e820_saved, &e820, sizeof(struct e820map));
1128 printk(KERN_INFO "e820: BIOS-provided physical RAM map:\n");
1129 e820_print_map(who);
1130}
1131
1132void __init memblock_x86_fill(void)
1133{
1134 int i;
1135 u64 end;
1136
1137 /*
1138 * EFI may have more than 128 entries
1139 * We are safe to enable resizing, beause memblock_x86_fill()
1140 * is rather later for x86
1141 */
1142 memblock_allow_resize();
1143
1144 for (i = 0; i < e820.nr_map; i++) {
1145 struct e820entry *ei = &e820.map[i];
1146
1147 end = ei->addr + ei->size;
1148 if (end != (resource_size_t)end)
1149 continue;
1150
1151 if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN)
1152 continue;
1153
1154 memblock_add(ei->addr, ei->size);
1155 }
1156
1157 /* throw away partial pages */
1158 memblock_trim_memory(PAGE_SIZE);
1159
1160 memblock_dump_all();
1161}
1162
1163void __init memblock_find_dma_reserve(void)
1164{
1165#ifdef CONFIG_X86_64
1166 u64 nr_pages = 0, nr_free_pages = 0;
1167 unsigned long start_pfn, end_pfn;
1168 phys_addr_t start, end;
1169 int i;
1170 u64 u;
1171
1172 /*
1173 * need to find out used area below MAX_DMA_PFN
1174 * need to use memblock to get free size in [0, MAX_DMA_PFN]
1175 * at first, and assume boot_mem will not take below MAX_DMA_PFN
1176 */
1177 for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
1178 start_pfn = min(start_pfn, MAX_DMA_PFN);
1179 end_pfn = min(end_pfn, MAX_DMA_PFN);
1180 nr_pages += end_pfn - start_pfn;
1181 }
1182
1183 for_each_free_mem_range(u, NUMA_NO_NODE, MEMBLOCK_NONE, &start, &end,
1184 NULL) {
1185 start_pfn = min_t(unsigned long, PFN_UP(start), MAX_DMA_PFN);
1186 end_pfn = min_t(unsigned long, PFN_DOWN(end), MAX_DMA_PFN);
1187 if (start_pfn < end_pfn)
1188 nr_free_pages += end_pfn - start_pfn;
1189 }
1190
1191 set_dma_reserve(nr_pages - nr_free_pages);
1192#endif
1193}