1/*
   2 * Copyright (C) STMicroelectronics 2009
   3 * Copyright (C) ST-Ericsson SA 2010
   4 *
   5 * License Terms: GNU General Public License v2
   6 * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
   7 * Author: Sundar Iyer <sundar.iyer@stericsson.com>
   8 * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
   9 *
  10 * U8500 PRCM Unit interface driver
  11 *
  12 */
  13#include <linux/module.h>
  14#include <linux/kernel.h>
  15#include <linux/delay.h>
  16#include <linux/errno.h>
  17#include <linux/err.h>
  18#include <linux/spinlock.h>
  19#include <linux/io.h>
  20#include <linux/slab.h>
  21#include <linux/mutex.h>
  22#include <linux/completion.h>
  23#include <linux/irq.h>
  24#include <linux/jiffies.h>
  25#include <linux/bitops.h>
  26#include <linux/fs.h>
 
 
  27#include <linux/platform_device.h>
  28#include <linux/uaccess.h>
  29#include <linux/mfd/core.h>
  30#include <linux/mfd/db8500-prcmu.h>
 
  31#include <linux/regulator/db8500-prcmu.h>
  32#include <linux/regulator/machine.h>
  33#include <mach/hardware.h>
  34#include <mach/irqs.h>
  35#include <mach/db8500-regs.h>
  36#include <mach/id.h>
  37#include "db8500-prcmu-regs.h"
  38
  39/* Offset for the firmware version within the TCPM */
  40#define PRCMU_FW_VERSION_OFFSET 0xA4
  41
  42/* PRCMU project numbers, defined by PRCMU FW */
  43#define PRCMU_PROJECT_ID_8500V1_0 1
  44#define PRCMU_PROJECT_ID_8500V2_0 2
  45#define PRCMU_PROJECT_ID_8400V2_0 3
  46
  47/* Index of different voltages to be used when accessing AVSData */
  48#define PRCM_AVS_BASE		0x2FC
  49#define PRCM_AVS_VBB_RET	(PRCM_AVS_BASE + 0x0)
  50#define PRCM_AVS_VBB_MAX_OPP	(PRCM_AVS_BASE + 0x1)
  51#define PRCM_AVS_VBB_100_OPP	(PRCM_AVS_BASE + 0x2)
  52#define PRCM_AVS_VBB_50_OPP	(PRCM_AVS_BASE + 0x3)
  53#define PRCM_AVS_VARM_MAX_OPP	(PRCM_AVS_BASE + 0x4)
  54#define PRCM_AVS_VARM_100_OPP	(PRCM_AVS_BASE + 0x5)
  55#define PRCM_AVS_VARM_50_OPP	(PRCM_AVS_BASE + 0x6)
  56#define PRCM_AVS_VARM_RET	(PRCM_AVS_BASE + 0x7)
  57#define PRCM_AVS_VAPE_100_OPP	(PRCM_AVS_BASE + 0x8)
  58#define PRCM_AVS_VAPE_50_OPP	(PRCM_AVS_BASE + 0x9)
  59#define PRCM_AVS_VMOD_100_OPP	(PRCM_AVS_BASE + 0xA)
  60#define PRCM_AVS_VMOD_50_OPP	(PRCM_AVS_BASE + 0xB)
  61#define PRCM_AVS_VSAFE		(PRCM_AVS_BASE + 0xC)
  62
  63#define PRCM_AVS_VOLTAGE		0
  64#define PRCM_AVS_VOLTAGE_MASK		0x3f
  65#define PRCM_AVS_ISSLOWSTARTUP		6
  66#define PRCM_AVS_ISSLOWSTARTUP_MASK	(1 << PRCM_AVS_ISSLOWSTARTUP)
  67#define PRCM_AVS_ISMODEENABLE		7
  68#define PRCM_AVS_ISMODEENABLE_MASK	(1 << PRCM_AVS_ISMODEENABLE)
  69
  70#define PRCM_BOOT_STATUS	0xFFF
  71#define PRCM_ROMCODE_A2P	0xFFE
  72#define PRCM_ROMCODE_P2A	0xFFD
  73#define PRCM_XP70_CUR_PWR_STATE 0xFFC      /* 4 BYTES */
  74
  75#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
  76
  77#define _PRCM_MBOX_HEADER		0xFE8 /* 16 bytes */
  78#define PRCM_MBOX_HEADER_REQ_MB0	(_PRCM_MBOX_HEADER + 0x0)
  79#define PRCM_MBOX_HEADER_REQ_MB1	(_PRCM_MBOX_HEADER + 0x1)
  80#define PRCM_MBOX_HEADER_REQ_MB2	(_PRCM_MBOX_HEADER + 0x2)
  81#define PRCM_MBOX_HEADER_REQ_MB3	(_PRCM_MBOX_HEADER + 0x3)
  82#define PRCM_MBOX_HEADER_REQ_MB4	(_PRCM_MBOX_HEADER + 0x4)
  83#define PRCM_MBOX_HEADER_REQ_MB5	(_PRCM_MBOX_HEADER + 0x5)
  84#define PRCM_MBOX_HEADER_ACK_MB0	(_PRCM_MBOX_HEADER + 0x8)
  85
  86/* Req Mailboxes */
  87#define PRCM_REQ_MB0 0xFDC /* 12 bytes  */
  88#define PRCM_REQ_MB1 0xFD0 /* 12 bytes  */
  89#define PRCM_REQ_MB2 0xFC0 /* 16 bytes  */
  90#define PRCM_REQ_MB3 0xE4C /* 372 bytes  */
  91#define PRCM_REQ_MB4 0xE48 /* 4 bytes  */
  92#define PRCM_REQ_MB5 0xE44 /* 4 bytes  */
  93
  94/* Ack Mailboxes */
  95#define PRCM_ACK_MB0 0xE08 /* 52 bytes  */
  96#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
  97#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
  98#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
  99#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
 100#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
 101
 102/* Mailbox 0 headers */
 103#define MB0H_POWER_STATE_TRANS		0
 104#define MB0H_CONFIG_WAKEUPS_EXE		1
 105#define MB0H_READ_WAKEUP_ACK		3
 106#define MB0H_CONFIG_WAKEUPS_SLEEP	4
 107
 108#define MB0H_WAKEUP_EXE 2
 109#define MB0H_WAKEUP_SLEEP 5
 110
 111/* Mailbox 0 REQs */
 112#define PRCM_REQ_MB0_AP_POWER_STATE	(PRCM_REQ_MB0 + 0x0)
 113#define PRCM_REQ_MB0_AP_PLL_STATE	(PRCM_REQ_MB0 + 0x1)
 114#define PRCM_REQ_MB0_ULP_CLOCK_STATE	(PRCM_REQ_MB0 + 0x2)
 115#define PRCM_REQ_MB0_DO_NOT_WFI		(PRCM_REQ_MB0 + 0x3)
 116#define PRCM_REQ_MB0_WAKEUP_8500	(PRCM_REQ_MB0 + 0x4)
 117#define PRCM_REQ_MB0_WAKEUP_4500	(PRCM_REQ_MB0 + 0x8)
 118
 119/* Mailbox 0 ACKs */
 120#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS	(PRCM_ACK_MB0 + 0x0)
 121#define PRCM_ACK_MB0_READ_POINTER	(PRCM_ACK_MB0 + 0x1)
 122#define PRCM_ACK_MB0_WAKEUP_0_8500	(PRCM_ACK_MB0 + 0x4)
 123#define PRCM_ACK_MB0_WAKEUP_0_4500	(PRCM_ACK_MB0 + 0x8)
 124#define PRCM_ACK_MB0_WAKEUP_1_8500	(PRCM_ACK_MB0 + 0x1C)
 125#define PRCM_ACK_MB0_WAKEUP_1_4500	(PRCM_ACK_MB0 + 0x20)
 126#define PRCM_ACK_MB0_EVENT_4500_NUMBERS	20
 127
 128/* Mailbox 1 headers */
 129#define MB1H_ARM_APE_OPP 0x0
 130#define MB1H_RESET_MODEM 0x2
 131#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
 132#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
 133#define MB1H_RELEASE_USB_WAKEUP 0x5
 
 134
 135/* Mailbox 1 Requests */
 136#define PRCM_REQ_MB1_ARM_OPP			(PRCM_REQ_MB1 + 0x0)
 137#define PRCM_REQ_MB1_APE_OPP			(PRCM_REQ_MB1 + 0x1)
 138#define PRCM_REQ_MB1_APE_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x4)
 139#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x8)
 
 
 
 140
 141/* Mailbox 1 ACKs */
 142#define PRCM_ACK_MB1_CURRENT_ARM_OPP	(PRCM_ACK_MB1 + 0x0)
 143#define PRCM_ACK_MB1_CURRENT_APE_OPP	(PRCM_ACK_MB1 + 0x1)
 144#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS	(PRCM_ACK_MB1 + 0x2)
 145#define PRCM_ACK_MB1_DVFS_STATUS	(PRCM_ACK_MB1 + 0x3)
 146
 147/* Mailbox 2 headers */
 148#define MB2H_DPS	0x0
 149#define MB2H_AUTO_PWR	0x1
 150
 151/* Mailbox 2 REQs */
 152#define PRCM_REQ_MB2_SVA_MMDSP		(PRCM_REQ_MB2 + 0x0)
 153#define PRCM_REQ_MB2_SVA_PIPE		(PRCM_REQ_MB2 + 0x1)
 154#define PRCM_REQ_MB2_SIA_MMDSP		(PRCM_REQ_MB2 + 0x2)
 155#define PRCM_REQ_MB2_SIA_PIPE		(PRCM_REQ_MB2 + 0x3)
 156#define PRCM_REQ_MB2_SGA		(PRCM_REQ_MB2 + 0x4)
 157#define PRCM_REQ_MB2_B2R2_MCDE		(PRCM_REQ_MB2 + 0x5)
 158#define PRCM_REQ_MB2_ESRAM12		(PRCM_REQ_MB2 + 0x6)
 159#define PRCM_REQ_MB2_ESRAM34		(PRCM_REQ_MB2 + 0x7)
 160#define PRCM_REQ_MB2_AUTO_PM_SLEEP	(PRCM_REQ_MB2 + 0x8)
 161#define PRCM_REQ_MB2_AUTO_PM_IDLE	(PRCM_REQ_MB2 + 0xC)
 162
 163/* Mailbox 2 ACKs */
 164#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
 165#define HWACC_PWR_ST_OK 0xFE
 166
 167/* Mailbox 3 headers */
 168#define MB3H_ANC	0x0
 169#define MB3H_SIDETONE	0x1
 170#define MB3H_SYSCLK	0xE
 171
 172/* Mailbox 3 Requests */
 173#define PRCM_REQ_MB3_ANC_FIR_COEFF	(PRCM_REQ_MB3 + 0x0)
 174#define PRCM_REQ_MB3_ANC_IIR_COEFF	(PRCM_REQ_MB3 + 0x20)
 175#define PRCM_REQ_MB3_ANC_SHIFTER	(PRCM_REQ_MB3 + 0x60)
 176#define PRCM_REQ_MB3_ANC_WARP		(PRCM_REQ_MB3 + 0x64)
 177#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN	(PRCM_REQ_MB3 + 0x68)
 178#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF	(PRCM_REQ_MB3 + 0x6C)
 179#define PRCM_REQ_MB3_SYSCLK_MGT		(PRCM_REQ_MB3 + 0x16C)
 180
 181/* Mailbox 4 headers */
 182#define MB4H_DDR_INIT	0x0
 183#define MB4H_MEM_ST	0x1
 184#define MB4H_HOTDOG	0x12
 185#define MB4H_HOTMON	0x13
 186#define MB4H_HOT_PERIOD	0x14
 
 
 
 
 
 187
 188/* Mailbox 4 Requests */
 189#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE	(PRCM_REQ_MB4 + 0x0)
 190#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE	(PRCM_REQ_MB4 + 0x1)
 191#define PRCM_REQ_MB4_ESRAM0_ST			(PRCM_REQ_MB4 + 0x3)
 192#define PRCM_REQ_MB4_HOTDOG_THRESHOLD		(PRCM_REQ_MB4 + 0x0)
 193#define PRCM_REQ_MB4_HOTMON_LOW			(PRCM_REQ_MB4 + 0x0)
 194#define PRCM_REQ_MB4_HOTMON_HIGH		(PRCM_REQ_MB4 + 0x1)
 195#define PRCM_REQ_MB4_HOTMON_CONFIG		(PRCM_REQ_MB4 + 0x2)
 196#define PRCM_REQ_MB4_HOT_PERIOD			(PRCM_REQ_MB4 + 0x0)
 197#define HOTMON_CONFIG_LOW			BIT(0)
 198#define HOTMON_CONFIG_HIGH			BIT(1)
 
 
 
 
 
 
 
 199
 200/* Mailbox 5 Requests */
 201#define PRCM_REQ_MB5_I2C_SLAVE_OP	(PRCM_REQ_MB5 + 0x0)
 202#define PRCM_REQ_MB5_I2C_HW_BITS	(PRCM_REQ_MB5 + 0x1)
 203#define PRCM_REQ_MB5_I2C_REG		(PRCM_REQ_MB5 + 0x2)
 204#define PRCM_REQ_MB5_I2C_VAL		(PRCM_REQ_MB5 + 0x3)
 205#define PRCMU_I2C_WRITE(slave) \
 206	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
 207#define PRCMU_I2C_READ(slave) \
 208	(((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
 209#define PRCMU_I2C_STOP_EN		BIT(3)
 210
 211/* Mailbox 5 ACKs */
 212#define PRCM_ACK_MB5_I2C_STATUS	(PRCM_ACK_MB5 + 0x1)
 213#define PRCM_ACK_MB5_I2C_VAL	(PRCM_ACK_MB5 + 0x3)
 214#define I2C_WR_OK 0x1
 215#define I2C_RD_OK 0x2
 216
 217#define NUM_MB 8
 218#define MBOX_BIT BIT
 219#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
 220
 221/*
 222 * Wakeups/IRQs
 223 */
 224
 225#define WAKEUP_BIT_RTC BIT(0)
 226#define WAKEUP_BIT_RTT0 BIT(1)
 227#define WAKEUP_BIT_RTT1 BIT(2)
 228#define WAKEUP_BIT_HSI0 BIT(3)
 229#define WAKEUP_BIT_HSI1 BIT(4)
 230#define WAKEUP_BIT_CA_WAKE BIT(5)
 231#define WAKEUP_BIT_USB BIT(6)
 232#define WAKEUP_BIT_ABB BIT(7)
 233#define WAKEUP_BIT_ABB_FIFO BIT(8)
 234#define WAKEUP_BIT_SYSCLK_OK BIT(9)
 235#define WAKEUP_BIT_CA_SLEEP BIT(10)
 236#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
 237#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
 238#define WAKEUP_BIT_ANC_OK BIT(13)
 239#define WAKEUP_BIT_SW_ERROR BIT(14)
 240#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
 241#define WAKEUP_BIT_ARM BIT(17)
 242#define WAKEUP_BIT_HOTMON_LOW BIT(18)
 243#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
 244#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
 245#define WAKEUP_BIT_GPIO0 BIT(23)
 246#define WAKEUP_BIT_GPIO1 BIT(24)
 247#define WAKEUP_BIT_GPIO2 BIT(25)
 248#define WAKEUP_BIT_GPIO3 BIT(26)
 249#define WAKEUP_BIT_GPIO4 BIT(27)
 250#define WAKEUP_BIT_GPIO5 BIT(28)
 251#define WAKEUP_BIT_GPIO6 BIT(29)
 252#define WAKEUP_BIT_GPIO7 BIT(30)
 253#define WAKEUP_BIT_GPIO8 BIT(31)
 254
 
 
 
 
 
 
 
 255/*
 256 * This vector maps irq numbers to the bits in the bit field used in
 257 * communication with the PRCMU firmware.
 258 *
 259 * The reason for having this is to keep the irq numbers contiguous even though
 260 * the bits in the bit field are not. (The bits also have a tendency to move
 261 * around, to further complicate matters.)
 262 */
 263#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE)
 264#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 265static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = {
 266	IRQ_ENTRY(RTC),
 267	IRQ_ENTRY(RTT0),
 268	IRQ_ENTRY(RTT1),
 269	IRQ_ENTRY(HSI0),
 270	IRQ_ENTRY(HSI1),
 271	IRQ_ENTRY(CA_WAKE),
 272	IRQ_ENTRY(USB),
 273	IRQ_ENTRY(ABB),
 274	IRQ_ENTRY(ABB_FIFO),
 275	IRQ_ENTRY(CA_SLEEP),
 276	IRQ_ENTRY(ARM),
 277	IRQ_ENTRY(HOTMON_LOW),
 278	IRQ_ENTRY(HOTMON_HIGH),
 279	IRQ_ENTRY(MODEM_SW_RESET_REQ),
 280	IRQ_ENTRY(GPIO0),
 281	IRQ_ENTRY(GPIO1),
 282	IRQ_ENTRY(GPIO2),
 283	IRQ_ENTRY(GPIO3),
 284	IRQ_ENTRY(GPIO4),
 285	IRQ_ENTRY(GPIO5),
 286	IRQ_ENTRY(GPIO6),
 287	IRQ_ENTRY(GPIO7),
 288	IRQ_ENTRY(GPIO8)
 289};
 290
 291#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1)
 292#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name)
 293static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = {
 294	WAKEUP_ENTRY(RTC),
 295	WAKEUP_ENTRY(RTT0),
 296	WAKEUP_ENTRY(RTT1),
 297	WAKEUP_ENTRY(HSI0),
 298	WAKEUP_ENTRY(HSI1),
 299	WAKEUP_ENTRY(USB),
 300	WAKEUP_ENTRY(ABB),
 301	WAKEUP_ENTRY(ABB_FIFO),
 302	WAKEUP_ENTRY(ARM)
 303};
 304
 305/*
 306 * mb0_transfer - state needed for mailbox 0 communication.
 307 * @lock:		The transaction lock.
 308 * @dbb_events_lock:	A lock used to handle concurrent access to (parts of)
 309 *			the request data.
 310 * @mask_work:		Work structure used for (un)masking wakeup interrupts.
 311 * @req:		Request data that need to persist between requests.
 312 */
 313static struct {
 314	spinlock_t lock;
 315	spinlock_t dbb_irqs_lock;
 316	struct work_struct mask_work;
 317	struct mutex ac_wake_lock;
 318	struct completion ac_wake_work;
 319	struct {
 320		u32 dbb_irqs;
 321		u32 dbb_wakeups;
 322		u32 abb_events;
 323	} req;
 324} mb0_transfer;
 325
 326/*
 327 * mb1_transfer - state needed for mailbox 1 communication.
 328 * @lock:	The transaction lock.
 329 * @work:	The transaction completion structure.
 
 330 * @ack:	Reply ("acknowledge") data.
 331 */
 332static struct {
 333	struct mutex lock;
 334	struct completion work;
 
 335	struct {
 336		u8 header;
 337		u8 arm_opp;
 338		u8 ape_opp;
 339		u8 ape_voltage_status;
 340	} ack;
 341} mb1_transfer;
 342
 343/*
 344 * mb2_transfer - state needed for mailbox 2 communication.
 345 * @lock:            The transaction lock.
 346 * @work:            The transaction completion structure.
 347 * @auto_pm_lock:    The autonomous power management configuration lock.
 348 * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
 349 * @req:             Request data that need to persist between requests.
 350 * @ack:             Reply ("acknowledge") data.
 351 */
 352static struct {
 353	struct mutex lock;
 354	struct completion work;
 355	spinlock_t auto_pm_lock;
 356	bool auto_pm_enabled;
 357	struct {
 358		u8 status;
 359	} ack;
 360} mb2_transfer;
 361
 362/*
 363 * mb3_transfer - state needed for mailbox 3 communication.
 364 * @lock:		The request lock.
 365 * @sysclk_lock:	A lock used to handle concurrent sysclk requests.
 366 * @sysclk_work:	Work structure used for sysclk requests.
 367 */
 368static struct {
 369	spinlock_t lock;
 370	struct mutex sysclk_lock;
 371	struct completion sysclk_work;
 372} mb3_transfer;
 373
 374/*
 375 * mb4_transfer - state needed for mailbox 4 communication.
 376 * @lock:	The transaction lock.
 377 * @work:	The transaction completion structure.
 378 */
 379static struct {
 380	struct mutex lock;
 381	struct completion work;
 382} mb4_transfer;
 383
 384/*
 385 * mb5_transfer - state needed for mailbox 5 communication.
 386 * @lock:	The transaction lock.
 387 * @work:	The transaction completion structure.
 388 * @ack:	Reply ("acknowledge") data.
 389 */
 390static struct {
 391	struct mutex lock;
 392	struct completion work;
 393	struct {
 394		u8 status;
 395		u8 value;
 396	} ack;
 397} mb5_transfer;
 398
 399static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
 400
 401/* Spinlocks */
 
 402static DEFINE_SPINLOCK(clkout_lock);
 403static DEFINE_SPINLOCK(gpiocr_lock);
 404
 405/* Global var to runtime determine TCDM base for v2 or v1 */
 406static __iomem void *tcdm_base;
 
 407
 408struct clk_mgt {
 409	unsigned int offset;
 410	u32 pllsw;
 
 
 
 
 
 
 
 
 411};
 412
 413static DEFINE_SPINLOCK(clk_mgt_lock);
 414
 415#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
 416struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
 417	CLK_MGT_ENTRY(SGACLK),
 418	CLK_MGT_ENTRY(UARTCLK),
 419	CLK_MGT_ENTRY(MSP02CLK),
 420	CLK_MGT_ENTRY(MSP1CLK),
 421	CLK_MGT_ENTRY(I2CCLK),
 422	CLK_MGT_ENTRY(SDMMCCLK),
 423	CLK_MGT_ENTRY(SLIMCLK),
 424	CLK_MGT_ENTRY(PER1CLK),
 425	CLK_MGT_ENTRY(PER2CLK),
 426	CLK_MGT_ENTRY(PER3CLK),
 427	CLK_MGT_ENTRY(PER5CLK),
 428	CLK_MGT_ENTRY(PER6CLK),
 429	CLK_MGT_ENTRY(PER7CLK),
 430	CLK_MGT_ENTRY(LCDCLK),
 431	CLK_MGT_ENTRY(BMLCLK),
 432	CLK_MGT_ENTRY(HSITXCLK),
 433	CLK_MGT_ENTRY(HSIRXCLK),
 434	CLK_MGT_ENTRY(HDMICLK),
 435	CLK_MGT_ENTRY(APEATCLK),
 436	CLK_MGT_ENTRY(APETRACECLK),
 437	CLK_MGT_ENTRY(MCDECLK),
 438	CLK_MGT_ENTRY(IPI2CCLK),
 439	CLK_MGT_ENTRY(DSIALTCLK),
 440	CLK_MGT_ENTRY(DMACLK),
 441	CLK_MGT_ENTRY(B2R2CLK),
 442	CLK_MGT_ENTRY(TVCLK),
 443	CLK_MGT_ENTRY(SSPCLK),
 444	CLK_MGT_ENTRY(RNGCLK),
 445	CLK_MGT_ENTRY(UICCCLK),
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 446};
 447
 
 448/*
 449* Used by MCDE to setup all necessary PRCMU registers
 450*/
 451#define PRCMU_RESET_DSIPLL		0x00004000
 452#define PRCMU_UNCLAMP_DSIPLL		0x00400800
 453
 454#define PRCMU_CLK_PLL_DIV_SHIFT		0
 455#define PRCMU_CLK_PLL_SW_SHIFT		5
 456#define PRCMU_CLK_38			(1 << 9)
 457#define PRCMU_CLK_38_SRC		(1 << 10)
 458#define PRCMU_CLK_38_DIV		(1 << 11)
 459
 460/* PLLDIV=12, PLLSW=4 (PLLDDR) */
 461#define PRCMU_DSI_CLOCK_SETTING		0x0000008C
 462
 463/* PLLDIV=8, PLLSW=4 (PLLDDR) */
 464#define PRCMU_DSI_CLOCK_SETTING_U8400	0x00000088
 465
 466/* DPI 50000000 Hz */
 467#define PRCMU_DPI_CLOCK_SETTING		((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
 468					  (16 << PRCMU_CLK_PLL_DIV_SHIFT))
 469#define PRCMU_DSI_LP_CLOCK_SETTING	0x00000E00
 470
 471/* D=101, N=1, R=4, SELDIV2=0 */
 472#define PRCMU_PLLDSI_FREQ_SETTING	0x00040165
 473
 474/* D=70, N=1, R=3, SELDIV2=0 */
 475#define PRCMU_PLLDSI_FREQ_SETTING_U8400	0x00030146
 476
 477#define PRCMU_ENABLE_PLLDSI		0x00000001
 478#define PRCMU_DISABLE_PLLDSI		0x00000000
 479#define PRCMU_RELEASE_RESET_DSS		0x0000400C
 480#define PRCMU_DSI_PLLOUT_SEL_SETTING	0x00000202
 481/* ESC clk, div0=1, div1=1, div2=3 */
 482#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV	0x07030101
 483#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV	0x00030101
 484#define PRCMU_DSI_RESET_SW		0x00000007
 485
 486#define PRCMU_PLLDSI_LOCKP_LOCKED	0x3
 487
 488static struct {
 489	u8 project_number;
 490	u8 api_version;
 491	u8 func_version;
 492	u8 errata;
 493} prcmu_version;
 494
 495
 496int prcmu_enable_dsipll(void)
 497{
 498	int i;
 499	unsigned int plldsifreq;
 500
 501	/* Clear DSIPLL_RESETN */
 502	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
 503	/* Unclamp DSIPLL in/out */
 504	writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
 505
 506	if (prcmu_is_u8400())
 507		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
 508	else
 509		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
 510	/* Set DSI PLL FREQ */
 511	writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
 512	writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
 513		(_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
 514	/* Enable Escape clocks */
 515	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
 516					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
 517
 518	/* Start DSI PLL */
 519	writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
 520	/* Reset DSI PLL */
 521	writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
 522	for (i = 0; i < 10; i++) {
 523		if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
 524			PRCMU_PLLDSI_LOCKP_LOCKED)
 525					== PRCMU_PLLDSI_LOCKP_LOCKED)
 526			break;
 527		udelay(100);
 528	}
 529	/* Set DSIPLL_RESETN */
 530	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
 531	return 0;
 532}
 533
 534int prcmu_disable_dsipll(void)
 535{
 536	/* Disable dsi pll */
 537	writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
 538	/* Disable  escapeclock */
 539	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
 540					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
 541	return 0;
 542}
 543
 544int prcmu_set_display_clocks(void)
 545{
 546	unsigned long flags;
 547	unsigned int dsiclk;
 548
 549	if (prcmu_is_u8400())
 550		dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400;
 551	else
 552		dsiclk = PRCMU_DSI_CLOCK_SETTING;
 553
 554	spin_lock_irqsave(&clk_mgt_lock, flags);
 555
 556	/* Grab the HW semaphore. */
 557	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 558		cpu_relax();
 559
 560	writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
 561	writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
 562	writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
 563
 564	/* Release the HW semaphore. */
 565	writel(0, (_PRCMU_BASE + PRCM_SEM));
 566
 567	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 568
 569	return 0;
 570}
 571
 572/**
 573 * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
 574 */
 575void prcmu_enable_spi2(void)
 576{
 577	u32 reg;
 578	unsigned long flags;
 579
 580	spin_lock_irqsave(&gpiocr_lock, flags);
 581	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
 582	writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
 583	spin_unlock_irqrestore(&gpiocr_lock, flags);
 584}
 585
 586/**
 587 * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
 588 */
 589void prcmu_disable_spi2(void)
 590{
 591	u32 reg;
 592	unsigned long flags;
 593
 594	spin_lock_irqsave(&gpiocr_lock, flags);
 595	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
 596	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
 597	spin_unlock_irqrestore(&gpiocr_lock, flags);
 598}
 599
 600bool prcmu_has_arm_maxopp(void)
 601{
 602	return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
 603		PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
 
 
 
 
 
 
 604}
 605
 606bool prcmu_is_u8400(void)
 607{
 608	return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0;
 609}
 610
 611/**
 612 * prcmu_get_boot_status - PRCMU boot status checking
 613 * Returns: the current PRCMU boot status
 614 */
 615int prcmu_get_boot_status(void)
 616{
 617	return readb(tcdm_base + PRCM_BOOT_STATUS);
 
 618}
 619
 620/**
 621 * prcmu_set_rc_a2p - This function is used to run few power state sequences
 622 * @val: Value to be set, i.e. transition requested
 623 * Returns: 0 on success, -EINVAL on invalid argument
 624 *
 625 * This function is used to run the following power state sequences -
 626 * any state to ApReset,  ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
 627 */
 628int prcmu_set_rc_a2p(enum romcode_write val)
 629{
 630	if (val < RDY_2_DS || val > RDY_2_XP70_RST)
 631		return -EINVAL;
 632	writeb(val, (tcdm_base + PRCM_ROMCODE_A2P));
 633	return 0;
 634}
 635
 636/**
 637 * prcmu_get_rc_p2a - This function is used to get power state sequences
 638 * Returns: the power transition that has last happened
 639 *
 640 * This function can return the following transitions-
 641 * any state to ApReset,  ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
 642 */
 643enum romcode_read prcmu_get_rc_p2a(void)
 644{
 645	return readb(tcdm_base + PRCM_ROMCODE_P2A);
 646}
 647
 648/**
 649 * prcmu_get_current_mode - Return the current XP70 power mode
 650 * Returns: Returns the current AP(ARM) power mode: init,
 651 * apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset
 652 */
 653enum ap_pwrst prcmu_get_xp70_current_state(void)
 654{
 655	return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE);
 656}
 657
 658/**
 659 * prcmu_config_clkout - Configure one of the programmable clock outputs.
 660 * @clkout:	The CLKOUT number (0 or 1).
 661 * @source:	The clock to be used (one of the PRCMU_CLKSRC_*).
 662 * @div:	The divider to be applied.
 663 *
 664 * Configures one of the programmable clock outputs (CLKOUTs).
 665 * @div should be in the range [1,63] to request a configuration, or 0 to
 666 * inform that the configuration is no longer requested.
 667 */
 668int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
 669{
 670	static int requests[2];
 671	int r = 0;
 672	unsigned long flags;
 673	u32 val;
 674	u32 bits;
 675	u32 mask;
 676	u32 div_mask;
 677
 678	BUG_ON(clkout > 1);
 679	BUG_ON(div > 63);
 680	BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009));
 681
 682	if (!div && !requests[clkout])
 683		return -EINVAL;
 684
 685	switch (clkout) {
 686	case 0:
 687		div_mask = PRCM_CLKOCR_CLKODIV0_MASK;
 688		mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK);
 689		bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) |
 690			(div << PRCM_CLKOCR_CLKODIV0_SHIFT));
 691		break;
 692	case 1:
 693		div_mask = PRCM_CLKOCR_CLKODIV1_MASK;
 694		mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK |
 695			PRCM_CLKOCR_CLK1TYPE);
 696		bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) |
 697			(div << PRCM_CLKOCR_CLKODIV1_SHIFT));
 698		break;
 699	}
 700	bits &= mask;
 701
 702	spin_lock_irqsave(&clkout_lock, flags);
 703
 704	val = readl(_PRCMU_BASE + PRCM_CLKOCR);
 705	if (val & div_mask) {
 706		if (div) {
 707			if ((val & mask) != bits) {
 708				r = -EBUSY;
 709				goto unlock_and_return;
 710			}
 711		} else {
 712			if ((val & mask & ~div_mask) != bits) {
 713				r = -EINVAL;
 714				goto unlock_and_return;
 715			}
 716		}
 717	}
 718	writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
 719	requests[clkout] += (div ? 1 : -1);
 720
 721unlock_and_return:
 722	spin_unlock_irqrestore(&clkout_lock, flags);
 723
 724	return r;
 725}
 726
 727int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
 728{
 729	unsigned long flags;
 730
 731	BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state));
 732
 733	spin_lock_irqsave(&mb0_transfer.lock, flags);
 734
 735	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 736		cpu_relax();
 737
 738	writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
 739	writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE));
 740	writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE));
 741	writeb((keep_ulp_clk ? 1 : 0),
 742		(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
 743	writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
 744	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
 745
 746	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 747
 748	return 0;
 749}
 750
 
 
 
 
 
 751/* This function should only be called while mb0_transfer.lock is held. */
 752static void config_wakeups(void)
 753{
 754	const u8 header[2] = {
 755		MB0H_CONFIG_WAKEUPS_EXE,
 756		MB0H_CONFIG_WAKEUPS_SLEEP
 757	};
 758	static u32 last_dbb_events;
 759	static u32 last_abb_events;
 760	u32 dbb_events;
 761	u32 abb_events;
 762	unsigned int i;
 763
 764	dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups;
 765	dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK);
 766
 767	abb_events = mb0_transfer.req.abb_events;
 768
 769	if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events))
 770		return;
 771
 772	for (i = 0; i < 2; i++) {
 773		while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 774			cpu_relax();
 775		writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
 776		writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
 777		writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
 778		writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
 779	}
 780	last_dbb_events = dbb_events;
 781	last_abb_events = abb_events;
 782}
 783
 784void prcmu_enable_wakeups(u32 wakeups)
 785{
 786	unsigned long flags;
 787	u32 bits;
 788	int i;
 789
 790	BUG_ON(wakeups != (wakeups & VALID_WAKEUPS));
 791
 792	for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) {
 793		if (wakeups & BIT(i))
 794			bits |= prcmu_wakeup_bit[i];
 795	}
 796
 797	spin_lock_irqsave(&mb0_transfer.lock, flags);
 798
 799	mb0_transfer.req.dbb_wakeups = bits;
 800	config_wakeups();
 801
 802	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 803}
 804
 805void prcmu_config_abb_event_readout(u32 abb_events)
 806{
 807	unsigned long flags;
 808
 809	spin_lock_irqsave(&mb0_transfer.lock, flags);
 810
 811	mb0_transfer.req.abb_events = abb_events;
 812	config_wakeups();
 813
 814	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 815}
 816
 817void prcmu_get_abb_event_buffer(void __iomem **buf)
 818{
 819	if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
 820		*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
 821	else
 822		*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500);
 823}
 824
 825/**
 826 * prcmu_set_arm_opp - set the appropriate ARM OPP
 827 * @opp: The new ARM operating point to which transition is to be made
 828 * Returns: 0 on success, non-zero on failure
 829 *
 830 * This function sets the the operating point of the ARM.
 831 */
 832int prcmu_set_arm_opp(u8 opp)
 833{
 834	int r;
 835
 836	if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK)
 837		return -EINVAL;
 838
 839	r = 0;
 840
 841	mutex_lock(&mb1_transfer.lock);
 842
 843	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 844		cpu_relax();
 845
 846	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 847	writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
 848	writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
 849
 850	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
 851	wait_for_completion(&mb1_transfer.work);
 852
 853	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
 854		(mb1_transfer.ack.arm_opp != opp))
 855		r = -EIO;
 856
 857	mutex_unlock(&mb1_transfer.lock);
 858
 859	return r;
 860}
 861
 862/**
 863 * prcmu_get_arm_opp - get the current ARM OPP
 864 *
 865 * Returns: the current ARM OPP
 866 */
 867int prcmu_get_arm_opp(void)
 868{
 869	return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
 870}
 871
 872/**
 873 * prcmu_get_ddr_opp - get the current DDR OPP
 874 *
 875 * Returns: the current DDR OPP
 876 */
 877int prcmu_get_ddr_opp(void)
 878{
 879	return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW);
 880}
 881
 882/**
 883 * set_ddr_opp - set the appropriate DDR OPP
 884 * @opp: The new DDR operating point to which transition is to be made
 885 * Returns: 0 on success, non-zero on failure
 886 *
 887 * This function sets the operating point of the DDR.
 888 */
 889int prcmu_set_ddr_opp(u8 opp)
 890{
 891	if (opp < DDR_100_OPP || opp > DDR_25_OPP)
 892		return -EINVAL;
 893	/* Changing the DDR OPP can hang the hardware pre-v21 */
 894	if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
 895		writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW));
 
 896
 897	return 0;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 898}
 
 899/**
 900 * set_ape_opp - set the appropriate APE OPP
 901 * @opp: The new APE operating point to which transition is to be made
 902 * Returns: 0 on success, non-zero on failure
 903 *
 904 * This function sets the operating point of the APE.
 905 */
 906int prcmu_set_ape_opp(u8 opp)
 907{
 908	int r = 0;
 909
 
 
 
 910	mutex_lock(&mb1_transfer.lock);
 911
 912	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 
 
 
 
 
 
 913		cpu_relax();
 914
 915	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 916	writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
 917	writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
 
 918
 919	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
 920	wait_for_completion(&mb1_transfer.work);
 921
 922	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
 923		(mb1_transfer.ack.ape_opp != opp))
 924		r = -EIO;
 925
 
 
 
 
 
 
 
 926	mutex_unlock(&mb1_transfer.lock);
 927
 928	return r;
 929}
 930
 931/**
 932 * prcmu_get_ape_opp - get the current APE OPP
 933 *
 934 * Returns: the current APE OPP
 935 */
 936int prcmu_get_ape_opp(void)
 937{
 938	return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP);
 939}
 940
 941/**
 942 * prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage
 943 * @enable: true to request the higher voltage, false to drop a request.
 944 *
 945 * Calls to this function to enable and disable requests must be balanced.
 946 */
 947int prcmu_request_ape_opp_100_voltage(bool enable)
 948{
 949	int r = 0;
 950	u8 header;
 951	static unsigned int requests;
 952
 953	mutex_lock(&mb1_transfer.lock);
 954
 955	if (enable) {
 956		if (0 != requests++)
 957			goto unlock_and_return;
 958		header = MB1H_REQUEST_APE_OPP_100_VOLT;
 959	} else {
 960		if (requests == 0) {
 961			r = -EIO;
 962			goto unlock_and_return;
 963		} else if (1 != requests--) {
 964			goto unlock_and_return;
 965		}
 966		header = MB1H_RELEASE_APE_OPP_100_VOLT;
 967	}
 968
 969	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 970		cpu_relax();
 971
 972	writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 973
 974	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
 975	wait_for_completion(&mb1_transfer.work);
 976
 977	if ((mb1_transfer.ack.header != header) ||
 978		((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
 979		r = -EIO;
 980
 981unlock_and_return:
 982	mutex_unlock(&mb1_transfer.lock);
 983
 984	return r;
 985}
 986
 987/**
 988 * prcmu_release_usb_wakeup_state - release the state required by a USB wakeup
 989 *
 990 * This function releases the power state requirements of a USB wakeup.
 991 */
 992int prcmu_release_usb_wakeup_state(void)
 993{
 994	int r = 0;
 995
 996	mutex_lock(&mb1_transfer.lock);
 997
 998	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 999		cpu_relax();
1000
1001	writeb(MB1H_RELEASE_USB_WAKEUP,
1002		(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
1003
1004	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1005	wait_for_completion(&mb1_transfer.work);
1006
1007	if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
1008		((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
1009		r = -EIO;
1010
1011	mutex_unlock(&mb1_transfer.lock);
1012
1013	return r;
1014}
1015
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1016/**
1017 * prcmu_set_epod - set the state of a EPOD (power domain)
1018 * @epod_id: The EPOD to set
1019 * @epod_state: The new EPOD state
1020 *
1021 * This function sets the state of a EPOD (power domain). It may not be called
1022 * from interrupt context.
1023 */
1024int prcmu_set_epod(u16 epod_id, u8 epod_state)
1025{
1026	int r = 0;
1027	bool ram_retention = false;
1028	int i;
1029
1030	/* check argument */
1031	BUG_ON(epod_id >= NUM_EPOD_ID);
1032
1033	/* set flag if retention is possible */
1034	switch (epod_id) {
1035	case EPOD_ID_SVAMMDSP:
1036	case EPOD_ID_SIAMMDSP:
1037	case EPOD_ID_ESRAM12:
1038	case EPOD_ID_ESRAM34:
1039		ram_retention = true;
1040		break;
1041	}
1042
1043	/* check argument */
1044	BUG_ON(epod_state > EPOD_STATE_ON);
1045	BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention);
1046
1047	/* get lock */
1048	mutex_lock(&mb2_transfer.lock);
1049
1050	/* wait for mailbox */
1051	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
1052		cpu_relax();
1053
1054	/* fill in mailbox */
1055	for (i = 0; i < NUM_EPOD_ID; i++)
1056		writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i));
1057	writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id));
1058
1059	writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
1060
1061	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1062
1063	/*
1064	 * The current firmware version does not handle errors correctly,
1065	 * and we cannot recover if there is an error.
1066	 * This is expected to change when the firmware is updated.
1067	 */
1068	if (!wait_for_completion_timeout(&mb2_transfer.work,
1069			msecs_to_jiffies(20000))) {
1070		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1071			__func__);
1072		r = -EIO;
1073		goto unlock_and_return;
1074	}
1075
1076	if (mb2_transfer.ack.status != HWACC_PWR_ST_OK)
1077		r = -EIO;
1078
1079unlock_and_return:
1080	mutex_unlock(&mb2_transfer.lock);
1081	return r;
1082}
1083
1084/**
1085 * prcmu_configure_auto_pm - Configure autonomous power management.
1086 * @sleep: Configuration for ApSleep.
1087 * @idle:  Configuration for ApIdle.
1088 */
1089void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
1090	struct prcmu_auto_pm_config *idle)
1091{
1092	u32 sleep_cfg;
1093	u32 idle_cfg;
1094	unsigned long flags;
1095
1096	BUG_ON((sleep == NULL) || (idle == NULL));
1097
1098	sleep_cfg = (sleep->sva_auto_pm_enable & 0xF);
1099	sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF));
1100	sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF));
1101	sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF));
1102	sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF));
1103	sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF));
1104
1105	idle_cfg = (idle->sva_auto_pm_enable & 0xF);
1106	idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF));
1107	idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF));
1108	idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF));
1109	idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF));
1110	idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF));
1111
1112	spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags);
1113
1114	/*
1115	 * The autonomous power management configuration is done through
1116	 * fields in mailbox 2, but these fields are only used as shared
1117	 * variables - i.e. there is no need to send a message.
1118	 */
1119	writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP));
1120	writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE));
1121
1122	mb2_transfer.auto_pm_enabled =
1123		((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1124		 (sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1125		 (idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
1126		 (idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON));
1127
1128	spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags);
1129}
1130EXPORT_SYMBOL(prcmu_configure_auto_pm);
1131
1132bool prcmu_is_auto_pm_enabled(void)
1133{
1134	return mb2_transfer.auto_pm_enabled;
1135}
1136
1137static int request_sysclk(bool enable)
1138{
1139	int r;
1140	unsigned long flags;
1141
1142	r = 0;
1143
1144	mutex_lock(&mb3_transfer.sysclk_lock);
1145
1146	spin_lock_irqsave(&mb3_transfer.lock, flags);
1147
1148	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
1149		cpu_relax();
1150
1151	writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
1152
1153	writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
1154	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1155
1156	spin_unlock_irqrestore(&mb3_transfer.lock, flags);
1157
1158	/*
1159	 * The firmware only sends an ACK if we want to enable the
1160	 * SysClk, and it succeeds.
1161	 */
1162	if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work,
1163			msecs_to_jiffies(20000))) {
1164		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1165			__func__);
1166		r = -EIO;
1167	}
1168
1169	mutex_unlock(&mb3_transfer.sysclk_lock);
1170
1171	return r;
1172}
1173
1174static int request_timclk(bool enable)
1175{
1176	u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK);
1177
1178	if (!enable)
1179		val |= PRCM_TCR_STOP_TIMERS;
1180	writel(val, (_PRCMU_BASE + PRCM_TCR));
1181
1182	return 0;
1183}
1184
1185static int request_reg_clock(u8 clock, bool enable)
1186{
1187	u32 val;
1188	unsigned long flags;
1189
1190	spin_lock_irqsave(&clk_mgt_lock, flags);
1191
1192	/* Grab the HW semaphore. */
1193	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
1194		cpu_relax();
1195
1196	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
1197	if (enable) {
1198		val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
1199	} else {
1200		clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
1201		val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
1202	}
1203	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
1204
1205	/* Release the HW semaphore. */
1206	writel(0, (_PRCMU_BASE + PRCM_SEM));
1207
1208	spin_unlock_irqrestore(&clk_mgt_lock, flags);
1209
1210	return 0;
1211}
1212
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1213/**
1214 * prcmu_request_clock() - Request for a clock to be enabled or disabled.
1215 * @clock:      The clock for which the request is made.
1216 * @enable:     Whether the clock should be enabled (true) or disabled (false).
1217 *
1218 * This function should only be used by the clock implementation.
1219 * Do not use it from any other place!
1220 */
1221int prcmu_request_clock(u8 clock, bool enable)
1222{
1223	if (clock < PRCMU_NUM_REG_CLOCKS)
1224		return request_reg_clock(clock, enable);
 
 
1225	else if (clock == PRCMU_TIMCLK)
1226		return request_timclk(enable);
 
 
 
 
 
 
1227	else if (clock == PRCMU_SYSCLK)
1228		return request_sysclk(enable);
 
 
1229	else
1230		return -EINVAL;
1231}
1232
1233int prcmu_config_esram0_deep_sleep(u8 state)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1234{
1235	if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
1236	    (state < ESRAM0_DEEP_SLEEP_STATE_OFF))
1237		return -EINVAL;
1238
1239	mutex_lock(&mb4_transfer.lock);
1240
1241	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
1242		cpu_relax();
1243
1244	writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
1245	writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON),
1246	       (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE));
1247	writeb(DDR_PWR_STATE_ON,
1248	       (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
1249	writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
1250
1251	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1252	wait_for_completion(&mb4_transfer.work);
1253
1254	mutex_unlock(&mb4_transfer.lock);
1255
1256	return 0;
1257}
1258
1259int prcmu_config_hotdog(u8 threshold)
1260{
1261	mutex_lock(&mb4_transfer.lock);
1262
1263	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
1264		cpu_relax();
1265
1266	writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
1267	writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
1268
1269	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1270	wait_for_completion(&mb4_transfer.work);
1271
1272	mutex_unlock(&mb4_transfer.lock);
1273
1274	return 0;
1275}
1276
1277int prcmu_config_hotmon(u8 low, u8 high)
1278{
1279	mutex_lock(&mb4_transfer.lock);
1280
1281	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
1282		cpu_relax();
1283
1284	writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
1285	writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH));
1286	writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH),
1287		(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
1288	writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
1289
1290	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1291	wait_for_completion(&mb4_transfer.work);
1292
1293	mutex_unlock(&mb4_transfer.lock);
1294
1295	return 0;
1296}
 
1297
1298static int config_hot_period(u16 val)
1299{
1300	mutex_lock(&mb4_transfer.lock);
1301
1302	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
1303		cpu_relax();
1304
1305	writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
1306	writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
1307
1308	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1309	wait_for_completion(&mb4_transfer.work);
1310
1311	mutex_unlock(&mb4_transfer.lock);
1312
1313	return 0;
1314}
1315
1316int prcmu_start_temp_sense(u16 cycles32k)
1317{
1318	if (cycles32k == 0xFFFF)
1319		return -EINVAL;
1320
1321	return config_hot_period(cycles32k);
1322}
 
1323
1324int prcmu_stop_temp_sense(void)
1325{
1326	return config_hot_period(0xFFFF);
1327}
 
1328
1329/**
1330 * prcmu_set_clock_divider() - Configure the clock divider.
1331 * @clock:	The clock for which the request is made.
1332 * @divider:	The clock divider. (< 32)
1333 *
1334 * This function should only be used by the clock implementation.
1335 * Do not use it from any other place!
1336 */
1337int prcmu_set_clock_divider(u8 clock, u8 divider)
1338{
1339	u32 val;
1340	unsigned long flags;
1341
1342	if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider))
1343		return -EINVAL;
1344
1345	spin_lock_irqsave(&clk_mgt_lock, flags);
1346
1347	/* Grab the HW semaphore. */
1348	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
1349		cpu_relax();
1350
1351	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
1352	val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK);
1353	val |= (u32)divider;
1354	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
1355
1356	/* Release the HW semaphore. */
1357	writel(0, (_PRCMU_BASE + PRCM_SEM));
1358
1359	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
 
 
1360
1361	return 0;
 
 
 
 
 
 
 
 
 
1362}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1363
1364/**
1365 * prcmu_abb_read() - Read register value(s) from the ABB.
1366 * @slave:	The I2C slave address.
1367 * @reg:	The (start) register address.
1368 * @value:	The read out value(s).
1369 * @size:	The number of registers to read.
1370 *
1371 * Reads register value(s) from the ABB.
1372 * @size has to be 1 for the current firmware version.
1373 */
1374int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
1375{
1376	int r;
1377
1378	if (size != 1)
1379		return -EINVAL;
1380
1381	mutex_lock(&mb5_transfer.lock);
1382
1383	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
1384		cpu_relax();
1385
 
1386	writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
1387	writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
1388	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
1389	writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
1390
1391	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1392
1393	if (!wait_for_completion_timeout(&mb5_transfer.work,
1394				msecs_to_jiffies(20000))) {
1395		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1396			__func__);
1397		r = -EIO;
1398	} else {
1399		r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
1400	}
1401
1402	if (!r)
1403		*value = mb5_transfer.ack.value;
1404
1405	mutex_unlock(&mb5_transfer.lock);
1406
1407	return r;
1408}
1409
1410/**
1411 * prcmu_abb_write() - Write register value(s) to the ABB.
1412 * @slave:	The I2C slave address.
1413 * @reg:	The (start) register address.
1414 * @value:	The value(s) to write.
 
1415 * @size:	The number of registers to write.
1416 *
1417 * Reads register value(s) from the ABB.
 
 
1418 * @size has to be 1 for the current firmware version.
1419 */
1420int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
1421{
1422	int r;
1423
1424	if (size != 1)
1425		return -EINVAL;
1426
1427	mutex_lock(&mb5_transfer.lock);
1428
1429	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
1430		cpu_relax();
1431
 
1432	writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
1433	writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
1434	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
1435	writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
1436
1437	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1438
1439	if (!wait_for_completion_timeout(&mb5_transfer.work,
1440				msecs_to_jiffies(20000))) {
1441		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1442			__func__);
1443		r = -EIO;
1444	} else {
1445		r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
1446	}
1447
1448	mutex_unlock(&mb5_transfer.lock);
1449
1450	return r;
1451}
1452
1453/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1454 * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem
1455 */
1456void prcmu_ac_wake_req(void)
1457{
1458	u32 val;
 
1459
1460	mutex_lock(&mb0_transfer.ac_wake_lock);
1461
1462	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
1463	if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
1464		goto unlock_and_return;
1465
1466	atomic_set(&ac_wake_req_state, 1);
1467
1468	writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
1469		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
 
 
 
 
 
 
 
 
 
 
1470
1471	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
1472			msecs_to_jiffies(20000))) {
1473		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1474			__func__);
 
1475	}
1476
1477unlock_and_return:
1478	mutex_unlock(&mb0_transfer.ac_wake_lock);
 
1479}
1480
1481/**
1482 * prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem
1483 */
1484void prcmu_ac_sleep_req()
1485{
1486	u32 val;
1487
1488	mutex_lock(&mb0_transfer.ac_wake_lock);
1489
1490	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
1491	if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
1492		goto unlock_and_return;
1493
1494	writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
1495		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
1496
1497	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
1498			msecs_to_jiffies(20000))) {
1499		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
1500			__func__);
1501	}
1502
1503	atomic_set(&ac_wake_req_state, 0);
1504
1505unlock_and_return:
1506	mutex_unlock(&mb0_transfer.ac_wake_lock);
1507}
1508
1509bool prcmu_is_ac_wake_requested(void)
1510{
1511	return (atomic_read(&ac_wake_req_state) != 0);
1512}
1513
1514/**
1515 * prcmu_system_reset - System reset
1516 *
1517 * Saves the reset reason code and then sets the APE_SOFRST register which
1518 * fires interrupt to fw
1519 */
1520void prcmu_system_reset(u16 reset_code)
1521{
1522	writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
1523	writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST));
1524}
1525
1526/**
1527 * prcmu_reset_modem - ask the PRCMU to reset modem
 
 
 
 
 
 
 
 
 
 
 
1528 */
1529void prcmu_modem_reset(void)
1530{
1531	mutex_lock(&mb1_transfer.lock);
1532
1533	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
1534		cpu_relax();
1535
1536	writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
1537	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1538	wait_for_completion(&mb1_transfer.work);
1539
1540	/*
1541	 * No need to check return from PRCMU as modem should go in reset state
1542	 * This state is already managed by upper layer
1543	 */
1544
1545	mutex_unlock(&mb1_transfer.lock);
1546}
1547
1548static void ack_dbb_wakeup(void)
1549{
1550	unsigned long flags;
1551
1552	spin_lock_irqsave(&mb0_transfer.lock, flags);
1553
1554	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
1555		cpu_relax();
1556
1557	writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
1558	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
1559
1560	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
1561}
1562
1563static inline void print_unknown_header_warning(u8 n, u8 header)
1564{
1565	pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
1566		header, n);
1567}
1568
1569static bool read_mailbox_0(void)
1570{
1571	bool r;
1572	u32 ev;
1573	unsigned int n;
1574	u8 header;
1575
1576	header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0);
1577	switch (header) {
1578	case MB0H_WAKEUP_EXE:
1579	case MB0H_WAKEUP_SLEEP:
1580		if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
1581			ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500);
1582		else
1583			ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500);
1584
1585		if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK))
1586			complete(&mb0_transfer.ac_wake_work);
1587		if (ev & WAKEUP_BIT_SYSCLK_OK)
1588			complete(&mb3_transfer.sysclk_work);
1589
1590		ev &= mb0_transfer.req.dbb_irqs;
1591
1592		for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
1593			if (ev & prcmu_irq_bit[n])
1594				generic_handle_irq(IRQ_PRCMU_BASE + n);
1595		}
1596		r = true;
1597		break;
1598	default:
1599		print_unknown_header_warning(0, header);
1600		r = false;
1601		break;
1602	}
1603	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
1604	return r;
1605}
1606
1607static bool read_mailbox_1(void)
1608{
1609	mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1);
1610	mb1_transfer.ack.arm_opp = readb(tcdm_base +
1611		PRCM_ACK_MB1_CURRENT_ARM_OPP);
1612	mb1_transfer.ack.ape_opp = readb(tcdm_base +
1613		PRCM_ACK_MB1_CURRENT_APE_OPP);
1614	mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
1615		PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
1616	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
1617	complete(&mb1_transfer.work);
1618	return false;
1619}
1620
1621static bool read_mailbox_2(void)
1622{
1623	mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
1624	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
1625	complete(&mb2_transfer.work);
1626	return false;
1627}
1628
1629static bool read_mailbox_3(void)
1630{
1631	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
1632	return false;
1633}
1634
1635static bool read_mailbox_4(void)
1636{
1637	u8 header;
1638	bool do_complete = true;
1639
1640	header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4);
1641	switch (header) {
1642	case MB4H_MEM_ST:
1643	case MB4H_HOTDOG:
1644	case MB4H_HOTMON:
1645	case MB4H_HOT_PERIOD:
 
 
 
 
 
1646		break;
1647	default:
1648		print_unknown_header_warning(4, header);
1649		do_complete = false;
1650		break;
1651	}
1652
1653	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
1654
1655	if (do_complete)
1656		complete(&mb4_transfer.work);
1657
1658	return false;
1659}
1660
1661static bool read_mailbox_5(void)
1662{
1663	mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
1664	mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
1665	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
1666	complete(&mb5_transfer.work);
1667	return false;
1668}
1669
1670static bool read_mailbox_6(void)
1671{
1672	writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
1673	return false;
1674}
1675
1676static bool read_mailbox_7(void)
1677{
1678	writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
1679	return false;
1680}
1681
1682static bool (* const read_mailbox[NUM_MB])(void) = {
1683	read_mailbox_0,
1684	read_mailbox_1,
1685	read_mailbox_2,
1686	read_mailbox_3,
1687	read_mailbox_4,
1688	read_mailbox_5,
1689	read_mailbox_6,
1690	read_mailbox_7
1691};
1692
1693static irqreturn_t prcmu_irq_handler(int irq, void *data)
1694{
1695	u32 bits;
1696	u8 n;
1697	irqreturn_t r;
1698
1699	bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
1700	if (unlikely(!bits))
1701		return IRQ_NONE;
1702
1703	r = IRQ_HANDLED;
1704	for (n = 0; bits; n++) {
1705		if (bits & MBOX_BIT(n)) {
1706			bits -= MBOX_BIT(n);
1707			if (read_mailbox[n]())
1708				r = IRQ_WAKE_THREAD;
1709		}
1710	}
1711	return r;
1712}
1713
1714static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
1715{
1716	ack_dbb_wakeup();
1717	return IRQ_HANDLED;
1718}
1719
1720static void prcmu_mask_work(struct work_struct *work)
1721{
1722	unsigned long flags;
1723
1724	spin_lock_irqsave(&mb0_transfer.lock, flags);
1725
1726	config_wakeups();
1727
1728	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
1729}
1730
1731static void prcmu_irq_mask(struct irq_data *d)
1732{
1733	unsigned long flags;
1734
1735	spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
1736
1737	mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE];
1738
1739	spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
1740
1741	if (d->irq != IRQ_PRCMU_CA_SLEEP)
1742		schedule_work(&mb0_transfer.mask_work);
1743}
1744
1745static void prcmu_irq_unmask(struct irq_data *d)
1746{
1747	unsigned long flags;
1748
1749	spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
1750
1751	mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE];
1752
1753	spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
1754
1755	if (d->irq != IRQ_PRCMU_CA_SLEEP)
1756		schedule_work(&mb0_transfer.mask_work);
1757}
1758
1759static void noop(struct irq_data *d)
1760{
1761}
1762
1763static struct irq_chip prcmu_irq_chip = {
1764	.name		= "prcmu",
1765	.irq_disable	= prcmu_irq_mask,
1766	.irq_ack	= noop,
1767	.irq_mask	= prcmu_irq_mask,
1768	.irq_unmask	= prcmu_irq_unmask,
1769};
1770
1771void __init prcmu_early_init(void)
1772{
1773	unsigned int i;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1774
1775	if (cpu_is_u8500v1()) {
1776		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
1777	} else if (cpu_is_u8500v2()) {
1778		void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
1779
1780		if (tcpm_base != NULL) {
1781			int version;
1782			version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
1783			prcmu_version.project_number = version & 0xFF;
1784			prcmu_version.api_version = (version >> 8) & 0xFF;
1785			prcmu_version.func_version = (version >> 16) & 0xFF;
1786			prcmu_version.errata = (version >> 24) & 0xFF;
1787			pr_info("PRCMU firmware version %d.%d.%d\n",
1788				(version >> 8) & 0xFF, (version >> 16) & 0xFF,
1789				(version >> 24) & 0xFF);
1790			iounmap(tcpm_base);
1791		}
1792
1793		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
1794	} else {
1795		pr_err("prcmu: Unsupported chip version\n");
1796		BUG();
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1797	}
1798
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1799	spin_lock_init(&mb0_transfer.lock);
1800	spin_lock_init(&mb0_transfer.dbb_irqs_lock);
1801	mutex_init(&mb0_transfer.ac_wake_lock);
1802	init_completion(&mb0_transfer.ac_wake_work);
1803	mutex_init(&mb1_transfer.lock);
1804	init_completion(&mb1_transfer.work);
 
1805	mutex_init(&mb2_transfer.lock);
1806	init_completion(&mb2_transfer.work);
1807	spin_lock_init(&mb2_transfer.auto_pm_lock);
1808	spin_lock_init(&mb3_transfer.lock);
1809	mutex_init(&mb3_transfer.sysclk_lock);
1810	init_completion(&mb3_transfer.sysclk_work);
1811	mutex_init(&mb4_transfer.lock);
1812	init_completion(&mb4_transfer.work);
1813	mutex_init(&mb5_transfer.lock);
1814	init_completion(&mb5_transfer.work);
1815
1816	INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
 
1817
1818	/* Initalize irqs. */
1819	for (i = 0; i < NUM_PRCMU_WAKEUPS; i++) {
1820		unsigned int irq;
1821
1822		irq = IRQ_PRCMU_BASE + i;
1823		irq_set_chip_and_handler(irq, &prcmu_irq_chip,
1824					 handle_simple_irq);
1825		set_irq_flags(irq, IRQF_VALID);
1826	}
1827}
1828
1829/*
1830 * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
1831 */
1832static struct regulator_consumer_supply db8500_vape_consumers[] = {
1833	REGULATOR_SUPPLY("v-ape", NULL),
1834	REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"),
1835	REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"),
1836	REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"),
1837	REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"),
 
1838	/* "v-mmc" changed to "vcore" in the mainline kernel */
1839	REGULATOR_SUPPLY("vcore", "sdi0"),
1840	REGULATOR_SUPPLY("vcore", "sdi1"),
1841	REGULATOR_SUPPLY("vcore", "sdi2"),
1842	REGULATOR_SUPPLY("vcore", "sdi3"),
1843	REGULATOR_SUPPLY("vcore", "sdi4"),
1844	REGULATOR_SUPPLY("v-dma", "dma40.0"),
1845	REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"),
1846	/* "v-uart" changed to "vcore" in the mainline kernel */
1847	REGULATOR_SUPPLY("vcore", "uart0"),
1848	REGULATOR_SUPPLY("vcore", "uart1"),
1849	REGULATOR_SUPPLY("vcore", "uart2"),
1850	REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
 
 
1851};
1852
1853static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
1854	/* CG2900 and CW1200 power to off-chip peripherals */
1855	REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"),
1856	REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"),
1857	REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
1858	/* AV8100 regulator */
1859	REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
1860};
1861
1862static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
1863	REGULATOR_SUPPLY("vsupply", "b2r2.0"),
1864	REGULATOR_SUPPLY("vsupply", "mcde.0"),
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1865};
1866
1867static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
1868	[DB8500_REGULATOR_VAPE] = {
1869		.constraints = {
1870			.name = "db8500-vape",
1871			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 
1872		},
1873		.consumer_supplies = db8500_vape_consumers,
1874		.num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers),
1875	},
1876	[DB8500_REGULATOR_VARM] = {
1877		.constraints = {
1878			.name = "db8500-varm",
1879			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1880		},
1881	},
1882	[DB8500_REGULATOR_VMODEM] = {
1883		.constraints = {
1884			.name = "db8500-vmodem",
1885			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1886		},
1887	},
1888	[DB8500_REGULATOR_VPLL] = {
1889		.constraints = {
1890			.name = "db8500-vpll",
1891			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1892		},
1893	},
1894	[DB8500_REGULATOR_VSMPS1] = {
1895		.constraints = {
1896			.name = "db8500-vsmps1",
1897			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1898		},
1899	},
1900	[DB8500_REGULATOR_VSMPS2] = {
1901		.constraints = {
1902			.name = "db8500-vsmps2",
1903			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1904		},
1905		.consumer_supplies = db8500_vsmps2_consumers,
1906		.num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers),
1907	},
1908	[DB8500_REGULATOR_VSMPS3] = {
1909		.constraints = {
1910			.name = "db8500-vsmps3",
1911			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1912		},
1913	},
1914	[DB8500_REGULATOR_VRF1] = {
1915		.constraints = {
1916			.name = "db8500-vrf1",
1917			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1918		},
1919	},
1920	[DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
1921		.supply_regulator = "db8500-vape",
1922		.constraints = {
1923			.name = "db8500-sva-mmdsp",
1924			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1925		},
 
 
1926	},
1927	[DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
1928		.constraints = {
1929			/* "ret" means "retention" */
1930			.name = "db8500-sva-mmdsp-ret",
1931			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1932		},
1933	},
1934	[DB8500_REGULATOR_SWITCH_SVAPIPE] = {
1935		.supply_regulator = "db8500-vape",
1936		.constraints = {
1937			.name = "db8500-sva-pipe",
1938			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1939		},
 
 
1940	},
1941	[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
1942		.supply_regulator = "db8500-vape",
1943		.constraints = {
1944			.name = "db8500-sia-mmdsp",
1945			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1946		},
 
 
1947	},
1948	[DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
1949		.constraints = {
1950			.name = "db8500-sia-mmdsp-ret",
1951			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1952		},
1953	},
1954	[DB8500_REGULATOR_SWITCH_SIAPIPE] = {
1955		.supply_regulator = "db8500-vape",
1956		.constraints = {
1957			.name = "db8500-sia-pipe",
1958			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1959		},
 
 
1960	},
1961	[DB8500_REGULATOR_SWITCH_SGA] = {
1962		.supply_regulator = "db8500-vape",
1963		.constraints = {
1964			.name = "db8500-sga",
1965			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1966		},
 
 
 
1967	},
1968	[DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
1969		.supply_regulator = "db8500-vape",
1970		.constraints = {
1971			.name = "db8500-b2r2-mcde",
1972			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1973		},
1974		.consumer_supplies = db8500_b2r2_mcde_consumers,
1975		.num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
1976	},
1977	[DB8500_REGULATOR_SWITCH_ESRAM12] = {
1978		.supply_regulator = "db8500-vape",
 
 
 
1979		.constraints = {
1980			.name = "db8500-esram12",
1981			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1982		},
 
 
1983	},
1984	[DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
1985		.constraints = {
1986			.name = "db8500-esram12-ret",
1987			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1988		},
1989	},
1990	[DB8500_REGULATOR_SWITCH_ESRAM34] = {
1991		.supply_regulator = "db8500-vape",
 
 
 
1992		.constraints = {
1993			.name = "db8500-esram34",
1994			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
1995		},
 
 
1996	},
1997	[DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
1998		.constraints = {
1999			.name = "db8500-esram34-ret",
2000			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
2001		},
2002	},
2003};
2004
2005static struct mfd_cell db8500_prcmu_devs[] = {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2006	{
2007		.name = "db8500-prcmu-regulators",
 
2008		.platform_data = &db8500_regulators,
2009		.pdata_size = sizeof(db8500_regulators),
2010	},
2011	{
2012		.name = "cpufreq-u8500",
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2013	},
2014};
2015
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2016/**
2017 * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
2018 *
2019 */
2020static int __init db8500_prcmu_probe(struct platform_device *pdev)
2021{
2022	int err = 0;
2023
2024	if (ux500_is_svp())
2025		return -ENODEV;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2026
2027	/* Clean up the mailbox interrupts after pre-kernel code. */
2028	writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
2029
2030	err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler,
2031		prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
 
 
 
 
 
 
2032	if (err < 0) {
2033		pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
2034		err = -EBUSY;
2035		goto no_irq_return;
2036	}
2037
2038	if (cpu_is_u8500v20_or_later())
2039		prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
2040
2041	err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
2042			      ARRAY_SIZE(db8500_prcmu_devs), NULL,
2043			      0);
2044
2045	if (err)
 
 
 
 
2046		pr_err("prcmu: Failed to add subdevices\n");
2047	else
2048		pr_info("DB8500 PRCMU initialized\n");
 
 
 
 
 
 
 
 
 
 
 
 
2049
2050no_irq_return:
 
 
 
 
 
 
 
2051	return err;
2052}
 
 
 
 
2053
2054static struct platform_driver db8500_prcmu_driver = {
2055	.driver = {
2056		.name = "db8500-prcmu",
2057		.owner = THIS_MODULE,
2058	},
 
2059};
2060
2061static int __init db8500_prcmu_init(void)
2062{
2063	return platform_driver_probe(&db8500_prcmu_driver, db8500_prcmu_probe);
2064}
2065
2066arch_initcall(db8500_prcmu_init);
2067
2068MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com>");
2069MODULE_DESCRIPTION("DB8500 PRCM Unit driver");
2070MODULE_LICENSE("GPL v2");