Loading...
Note: File does not exist in v3.1.
1/*
2 * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling
3 *
4 * Copyright (C) 2004-2013 Synopsys, Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions, and the following disclaimer,
11 * without modification.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The names of the above-listed copyright holders may not be used
16 * to endorse or promote products derived from this software without
17 * specific prior written permission.
18 *
19 * ALTERNATIVELY, this software may be distributed under the terms of the
20 * GNU General Public License ("GPL") as published by the Free Software
21 * Foundation; either version 2 of the License, or (at your option) any
22 * later version.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
25 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
26 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
27 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
28 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
29 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
30 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
31 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
32 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
33 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
34 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 */
36
37/*
38 * This file contains the interrupt handlers for Host mode
39 */
40#include <linux/kernel.h>
41#include <linux/module.h>
42#include <linux/spinlock.h>
43#include <linux/interrupt.h>
44#include <linux/dma-mapping.h>
45#include <linux/io.h>
46#include <linux/slab.h>
47#include <linux/usb.h>
48
49#include <linux/usb/hcd.h>
50#include <linux/usb/ch11.h>
51
52#include "core.h"
53#include "hcd.h"
54
55/* This function is for debug only */
56static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg)
57{
58 u16 curr_frame_number = hsotg->frame_number;
59 u16 expected = dwc2_frame_num_inc(hsotg->last_frame_num, 1);
60
61 if (expected != curr_frame_number)
62 dwc2_sch_vdbg(hsotg, "MISSED SOF %04x != %04x\n",
63 expected, curr_frame_number);
64
65#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
66 if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
67 if (expected != curr_frame_number) {
68 hsotg->frame_num_array[hsotg->frame_num_idx] =
69 curr_frame_number;
70 hsotg->last_frame_num_array[hsotg->frame_num_idx] =
71 hsotg->last_frame_num;
72 hsotg->frame_num_idx++;
73 }
74 } else if (!hsotg->dumped_frame_num_array) {
75 int i;
76
77 dev_info(hsotg->dev, "Frame Last Frame\n");
78 dev_info(hsotg->dev, "----- ----------\n");
79 for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
80 dev_info(hsotg->dev, "0x%04x 0x%04x\n",
81 hsotg->frame_num_array[i],
82 hsotg->last_frame_num_array[i]);
83 }
84 hsotg->dumped_frame_num_array = 1;
85 }
86#endif
87 hsotg->last_frame_num = curr_frame_number;
88}
89
90static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg,
91 struct dwc2_host_chan *chan,
92 struct dwc2_qtd *qtd)
93{
94 struct usb_device *root_hub = dwc2_hsotg_to_hcd(hsotg)->self.root_hub;
95 struct urb *usb_urb;
96
97 if (!chan->qh)
98 return;
99
100 if (chan->qh->dev_speed == USB_SPEED_HIGH)
101 return;
102
103 if (!qtd->urb)
104 return;
105
106 usb_urb = qtd->urb->priv;
107 if (!usb_urb || !usb_urb->dev || !usb_urb->dev->tt)
108 return;
109
110 /*
111 * The root hub doesn't really have a TT, but Linux thinks it
112 * does because how could you have a "high speed hub" that
113 * directly talks directly to low speed devices without a TT?
114 * It's all lies. Lies, I tell you.
115 */
116 if (usb_urb->dev->tt->hub == root_hub)
117 return;
118
119 if (qtd->urb->status != -EPIPE && qtd->urb->status != -EREMOTEIO) {
120 chan->qh->tt_buffer_dirty = 1;
121 if (usb_hub_clear_tt_buffer(usb_urb))
122 /* Clear failed; let's hope things work anyway */
123 chan->qh->tt_buffer_dirty = 0;
124 }
125}
126
127/*
128 * Handles the start-of-frame interrupt in host mode. Non-periodic
129 * transactions may be queued to the DWC_otg controller for the current
130 * (micro)frame. Periodic transactions may be queued to the controller
131 * for the next (micro)frame.
132 */
133static void dwc2_sof_intr(struct dwc2_hsotg *hsotg)
134{
135 struct list_head *qh_entry;
136 struct dwc2_qh *qh;
137 enum dwc2_transaction_type tr_type;
138
139 /* Clear interrupt */
140 dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
141
142#ifdef DEBUG_SOF
143 dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n");
144#endif
145
146 hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
147
148 dwc2_track_missed_sofs(hsotg);
149
150 /* Determine whether any periodic QHs should be executed */
151 qh_entry = hsotg->periodic_sched_inactive.next;
152 while (qh_entry != &hsotg->periodic_sched_inactive) {
153 qh = list_entry(qh_entry, struct dwc2_qh, qh_list_entry);
154 qh_entry = qh_entry->next;
155 if (dwc2_frame_num_le(qh->next_active_frame,
156 hsotg->frame_number)) {
157 dwc2_sch_vdbg(hsotg, "QH=%p ready fn=%04x, nxt=%04x\n",
158 qh, hsotg->frame_number,
159 qh->next_active_frame);
160
161 /*
162 * Move QH to the ready list to be executed next
163 * (micro)frame
164 */
165 list_move_tail(&qh->qh_list_entry,
166 &hsotg->periodic_sched_ready);
167 }
168 }
169 tr_type = dwc2_hcd_select_transactions(hsotg);
170 if (tr_type != DWC2_TRANSACTION_NONE)
171 dwc2_hcd_queue_transactions(hsotg, tr_type);
172}
173
174/*
175 * Handles the Rx FIFO Level Interrupt, which indicates that there is
176 * at least one packet in the Rx FIFO. The packets are moved from the FIFO to
177 * memory if the DWC_otg controller is operating in Slave mode.
178 */
179static void dwc2_rx_fifo_level_intr(struct dwc2_hsotg *hsotg)
180{
181 u32 grxsts, chnum, bcnt, dpid, pktsts;
182 struct dwc2_host_chan *chan;
183
184 if (dbg_perio())
185 dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n");
186
187 grxsts = dwc2_readl(hsotg->regs + GRXSTSP);
188 chnum = (grxsts & GRXSTS_HCHNUM_MASK) >> GRXSTS_HCHNUM_SHIFT;
189 chan = hsotg->hc_ptr_array[chnum];
190 if (!chan) {
191 dev_err(hsotg->dev, "Unable to get corresponding channel\n");
192 return;
193 }
194
195 bcnt = (grxsts & GRXSTS_BYTECNT_MASK) >> GRXSTS_BYTECNT_SHIFT;
196 dpid = (grxsts & GRXSTS_DPID_MASK) >> GRXSTS_DPID_SHIFT;
197 pktsts = (grxsts & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT;
198
199 /* Packet Status */
200 if (dbg_perio()) {
201 dev_vdbg(hsotg->dev, " Ch num = %d\n", chnum);
202 dev_vdbg(hsotg->dev, " Count = %d\n", bcnt);
203 dev_vdbg(hsotg->dev, " DPID = %d, chan.dpid = %d\n", dpid,
204 chan->data_pid_start);
205 dev_vdbg(hsotg->dev, " PStatus = %d\n", pktsts);
206 }
207
208 switch (pktsts) {
209 case GRXSTS_PKTSTS_HCHIN:
210 /* Read the data into the host buffer */
211 if (bcnt > 0) {
212 dwc2_read_packet(hsotg, chan->xfer_buf, bcnt);
213
214 /* Update the HC fields for the next packet received */
215 chan->xfer_count += bcnt;
216 chan->xfer_buf += bcnt;
217 }
218 break;
219 case GRXSTS_PKTSTS_HCHIN_XFER_COMP:
220 case GRXSTS_PKTSTS_DATATOGGLEERR:
221 case GRXSTS_PKTSTS_HCHHALTED:
222 /* Handled in interrupt, just ignore data */
223 break;
224 default:
225 dev_err(hsotg->dev,
226 "RxFIFO Level Interrupt: Unknown status %d\n", pktsts);
227 break;
228 }
229}
230
231/*
232 * This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
233 * data packets may be written to the FIFO for OUT transfers. More requests
234 * may be written to the non-periodic request queue for IN transfers. This
235 * interrupt is enabled only in Slave mode.
236 */
237static void dwc2_np_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg)
238{
239 dev_vdbg(hsotg->dev, "--Non-Periodic TxFIFO Empty Interrupt--\n");
240 dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_NON_PERIODIC);
241}
242
243/*
244 * This interrupt occurs when the periodic Tx FIFO is half-empty. More data
245 * packets may be written to the FIFO for OUT transfers. More requests may be
246 * written to the periodic request queue for IN transfers. This interrupt is
247 * enabled only in Slave mode.
248 */
249static void dwc2_perio_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg)
250{
251 if (dbg_perio())
252 dev_vdbg(hsotg->dev, "--Periodic TxFIFO Empty Interrupt--\n");
253 dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_PERIODIC);
254}
255
256static void dwc2_hprt0_enable(struct dwc2_hsotg *hsotg, u32 hprt0,
257 u32 *hprt0_modify)
258{
259 struct dwc2_core_params *params = &hsotg->params;
260 int do_reset = 0;
261 u32 usbcfg;
262 u32 prtspd;
263 u32 hcfg;
264 u32 fslspclksel;
265 u32 hfir;
266
267 dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
268
269 /* Every time when port enables calculate HFIR.FrInterval */
270 hfir = dwc2_readl(hsotg->regs + HFIR);
271 hfir &= ~HFIR_FRINT_MASK;
272 hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT &
273 HFIR_FRINT_MASK;
274 dwc2_writel(hfir, hsotg->regs + HFIR);
275
276 /* Check if we need to adjust the PHY clock speed for low power */
277 if (!params->host_support_fs_ls_low_power) {
278 /* Port has been enabled, set the reset change flag */
279 hsotg->flags.b.port_reset_change = 1;
280 return;
281 }
282
283 usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
284 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
285
286 if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) {
287 /* Low power */
288 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) {
289 /* Set PHY low power clock select for FS/LS devices */
290 usbcfg |= GUSBCFG_PHY_LP_CLK_SEL;
291 dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
292 do_reset = 1;
293 }
294
295 hcfg = dwc2_readl(hsotg->regs + HCFG);
296 fslspclksel = (hcfg & HCFG_FSLSPCLKSEL_MASK) >>
297 HCFG_FSLSPCLKSEL_SHIFT;
298
299 if (prtspd == HPRT0_SPD_LOW_SPEED &&
300 params->host_ls_low_power_phy_clk ==
301 DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
302 /* 6 MHZ */
303 dev_vdbg(hsotg->dev,
304 "FS_PHY programming HCFG to 6 MHz\n");
305 if (fslspclksel != HCFG_FSLSPCLKSEL_6_MHZ) {
306 fslspclksel = HCFG_FSLSPCLKSEL_6_MHZ;
307 hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
308 hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
309 dwc2_writel(hcfg, hsotg->regs + HCFG);
310 do_reset = 1;
311 }
312 } else {
313 /* 48 MHZ */
314 dev_vdbg(hsotg->dev,
315 "FS_PHY programming HCFG to 48 MHz\n");
316 if (fslspclksel != HCFG_FSLSPCLKSEL_48_MHZ) {
317 fslspclksel = HCFG_FSLSPCLKSEL_48_MHZ;
318 hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
319 hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
320 dwc2_writel(hcfg, hsotg->regs + HCFG);
321 do_reset = 1;
322 }
323 }
324 } else {
325 /* Not low power */
326 if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) {
327 usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL;
328 dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
329 do_reset = 1;
330 }
331 }
332
333 if (do_reset) {
334 *hprt0_modify |= HPRT0_RST;
335 dwc2_writel(*hprt0_modify, hsotg->regs + HPRT0);
336 queue_delayed_work(hsotg->wq_otg, &hsotg->reset_work,
337 msecs_to_jiffies(60));
338 } else {
339 /* Port has been enabled, set the reset change flag */
340 hsotg->flags.b.port_reset_change = 1;
341 }
342}
343
344/*
345 * There are multiple conditions that can cause a port interrupt. This function
346 * determines which interrupt conditions have occurred and handles them
347 * appropriately.
348 */
349static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
350{
351 u32 hprt0;
352 u32 hprt0_modify;
353
354 dev_vdbg(hsotg->dev, "--Port Interrupt--\n");
355
356 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
357 hprt0_modify = hprt0;
358
359 /*
360 * Clear appropriate bits in HPRT0 to clear the interrupt bit in
361 * GINTSTS
362 */
363 hprt0_modify &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG |
364 HPRT0_OVRCURRCHG);
365
366 /*
367 * Port Connect Detected
368 * Set flag and clear if detected
369 */
370 if (hprt0 & HPRT0_CONNDET) {
371 dwc2_writel(hprt0_modify | HPRT0_CONNDET, hsotg->regs + HPRT0);
372
373 dev_vdbg(hsotg->dev,
374 "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n",
375 hprt0);
376 dwc2_hcd_connect(hsotg);
377
378 /*
379 * The Hub driver asserts a reset when it sees port connect
380 * status change flag
381 */
382 }
383
384 /*
385 * Port Enable Changed
386 * Clear if detected - Set internal flag if disabled
387 */
388 if (hprt0 & HPRT0_ENACHG) {
389 dwc2_writel(hprt0_modify | HPRT0_ENACHG, hsotg->regs + HPRT0);
390 dev_vdbg(hsotg->dev,
391 " --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n",
392 hprt0, !!(hprt0 & HPRT0_ENA));
393 if (hprt0 & HPRT0_ENA) {
394 hsotg->new_connection = true;
395 dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify);
396 } else {
397 hsotg->flags.b.port_enable_change = 1;
398 if (hsotg->params.dma_desc_fs_enable) {
399 u32 hcfg;
400
401 hsotg->params.dma_desc_enable = 0;
402 hsotg->new_connection = false;
403 hcfg = dwc2_readl(hsotg->regs + HCFG);
404 hcfg &= ~HCFG_DESCDMA;
405 dwc2_writel(hcfg, hsotg->regs + HCFG);
406 }
407 }
408 }
409
410 /* Overcurrent Change Interrupt */
411 if (hprt0 & HPRT0_OVRCURRCHG) {
412 dwc2_writel(hprt0_modify | HPRT0_OVRCURRCHG,
413 hsotg->regs + HPRT0);
414 dev_vdbg(hsotg->dev,
415 " --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n",
416 hprt0);
417 hsotg->flags.b.port_over_current_change = 1;
418 }
419}
420
421/*
422 * Gets the actual length of a transfer after the transfer halts. halt_status
423 * holds the reason for the halt.
424 *
425 * For IN transfers where halt_status is DWC2_HC_XFER_COMPLETE, *short_read
426 * is set to 1 upon return if less than the requested number of bytes were
427 * transferred. short_read may also be NULL on entry, in which case it remains
428 * unchanged.
429 */
430static u32 dwc2_get_actual_xfer_length(struct dwc2_hsotg *hsotg,
431 struct dwc2_host_chan *chan, int chnum,
432 struct dwc2_qtd *qtd,
433 enum dwc2_halt_status halt_status,
434 int *short_read)
435{
436 u32 hctsiz, count, length;
437
438 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
439
440 if (halt_status == DWC2_HC_XFER_COMPLETE) {
441 if (chan->ep_is_in) {
442 count = (hctsiz & TSIZ_XFERSIZE_MASK) >>
443 TSIZ_XFERSIZE_SHIFT;
444 length = chan->xfer_len - count;
445 if (short_read != NULL)
446 *short_read = (count != 0);
447 } else if (chan->qh->do_split) {
448 length = qtd->ssplit_out_xfer_count;
449 } else {
450 length = chan->xfer_len;
451 }
452 } else {
453 /*
454 * Must use the hctsiz.pktcnt field to determine how much data
455 * has been transferred. This field reflects the number of
456 * packets that have been transferred via the USB. This is
457 * always an integral number of packets if the transfer was
458 * halted before its normal completion. (Can't use the
459 * hctsiz.xfersize field because that reflects the number of
460 * bytes transferred via the AHB, not the USB).
461 */
462 count = (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT;
463 length = (chan->start_pkt_count - count) * chan->max_packet;
464 }
465
466 return length;
467}
468
469/**
470 * dwc2_update_urb_state() - Updates the state of the URB after a Transfer
471 * Complete interrupt on the host channel. Updates the actual_length field
472 * of the URB based on the number of bytes transferred via the host channel.
473 * Sets the URB status if the data transfer is finished.
474 *
475 * Return: 1 if the data transfer specified by the URB is completely finished,
476 * 0 otherwise
477 */
478static int dwc2_update_urb_state(struct dwc2_hsotg *hsotg,
479 struct dwc2_host_chan *chan, int chnum,
480 struct dwc2_hcd_urb *urb,
481 struct dwc2_qtd *qtd)
482{
483 u32 hctsiz;
484 int xfer_done = 0;
485 int short_read = 0;
486 int xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
487 DWC2_HC_XFER_COMPLETE,
488 &short_read);
489
490 if (urb->actual_length + xfer_length > urb->length) {
491 dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__);
492 xfer_length = urb->length - urb->actual_length;
493 }
494
495 dev_vdbg(hsotg->dev, "urb->actual_length=%d xfer_length=%d\n",
496 urb->actual_length, xfer_length);
497 urb->actual_length += xfer_length;
498
499 if (xfer_length && chan->ep_type == USB_ENDPOINT_XFER_BULK &&
500 (urb->flags & URB_SEND_ZERO_PACKET) &&
501 urb->actual_length >= urb->length &&
502 !(urb->length % chan->max_packet)) {
503 xfer_done = 0;
504 } else if (short_read || urb->actual_length >= urb->length) {
505 xfer_done = 1;
506 urb->status = 0;
507 }
508
509 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
510 dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
511 __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
512 dev_vdbg(hsotg->dev, " chan->xfer_len %d\n", chan->xfer_len);
513 dev_vdbg(hsotg->dev, " hctsiz.xfersize %d\n",
514 (hctsiz & TSIZ_XFERSIZE_MASK) >> TSIZ_XFERSIZE_SHIFT);
515 dev_vdbg(hsotg->dev, " urb->transfer_buffer_length %d\n", urb->length);
516 dev_vdbg(hsotg->dev, " urb->actual_length %d\n", urb->actual_length);
517 dev_vdbg(hsotg->dev, " short_read %d, xfer_done %d\n", short_read,
518 xfer_done);
519
520 return xfer_done;
521}
522
523/*
524 * Save the starting data toggle for the next transfer. The data toggle is
525 * saved in the QH for non-control transfers and it's saved in the QTD for
526 * control transfers.
527 */
528void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
529 struct dwc2_host_chan *chan, int chnum,
530 struct dwc2_qtd *qtd)
531{
532 u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
533 u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
534
535 if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
536 if (WARN(!chan || !chan->qh,
537 "chan->qh must be specified for non-control eps\n"))
538 return;
539
540 if (pid == TSIZ_SC_MC_PID_DATA0)
541 chan->qh->data_toggle = DWC2_HC_PID_DATA0;
542 else
543 chan->qh->data_toggle = DWC2_HC_PID_DATA1;
544 } else {
545 if (WARN(!qtd,
546 "qtd must be specified for control eps\n"))
547 return;
548
549 if (pid == TSIZ_SC_MC_PID_DATA0)
550 qtd->data_toggle = DWC2_HC_PID_DATA0;
551 else
552 qtd->data_toggle = DWC2_HC_PID_DATA1;
553 }
554}
555
556/**
557 * dwc2_update_isoc_urb_state() - Updates the state of an Isochronous URB when
558 * the transfer is stopped for any reason. The fields of the current entry in
559 * the frame descriptor array are set based on the transfer state and the input
560 * halt_status. Completes the Isochronous URB if all the URB frames have been
561 * completed.
562 *
563 * Return: DWC2_HC_XFER_COMPLETE if there are more frames remaining to be
564 * transferred in the URB. Otherwise return DWC2_HC_XFER_URB_COMPLETE.
565 */
566static enum dwc2_halt_status dwc2_update_isoc_urb_state(
567 struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
568 int chnum, struct dwc2_qtd *qtd,
569 enum dwc2_halt_status halt_status)
570{
571 struct dwc2_hcd_iso_packet_desc *frame_desc;
572 struct dwc2_hcd_urb *urb = qtd->urb;
573
574 if (!urb)
575 return DWC2_HC_XFER_NO_HALT_STATUS;
576
577 frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
578
579 switch (halt_status) {
580 case DWC2_HC_XFER_COMPLETE:
581 frame_desc->status = 0;
582 frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
583 chan, chnum, qtd, halt_status, NULL);
584 break;
585 case DWC2_HC_XFER_FRAME_OVERRUN:
586 urb->error_count++;
587 if (chan->ep_is_in)
588 frame_desc->status = -ENOSR;
589 else
590 frame_desc->status = -ECOMM;
591 frame_desc->actual_length = 0;
592 break;
593 case DWC2_HC_XFER_BABBLE_ERR:
594 urb->error_count++;
595 frame_desc->status = -EOVERFLOW;
596 /* Don't need to update actual_length in this case */
597 break;
598 case DWC2_HC_XFER_XACT_ERR:
599 urb->error_count++;
600 frame_desc->status = -EPROTO;
601 frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
602 chan, chnum, qtd, halt_status, NULL);
603
604 /* Skip whole frame */
605 if (chan->qh->do_split &&
606 chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in &&
607 hsotg->params.host_dma > 0) {
608 qtd->complete_split = 0;
609 qtd->isoc_split_offset = 0;
610 }
611
612 break;
613 default:
614 dev_err(hsotg->dev, "Unhandled halt_status (%d)\n",
615 halt_status);
616 break;
617 }
618
619 if (++qtd->isoc_frame_index == urb->packet_count) {
620 /*
621 * urb->status is not used for isoc transfers. The individual
622 * frame_desc statuses are used instead.
623 */
624 dwc2_host_complete(hsotg, qtd, 0);
625 halt_status = DWC2_HC_XFER_URB_COMPLETE;
626 } else {
627 halt_status = DWC2_HC_XFER_COMPLETE;
628 }
629
630 return halt_status;
631}
632
633/*
634 * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
635 * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
636 * still linked to the QH, the QH is added to the end of the inactive
637 * non-periodic schedule. For periodic QHs, removes the QH from the periodic
638 * schedule if no more QTDs are linked to the QH.
639 */
640static void dwc2_deactivate_qh(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
641 int free_qtd)
642{
643 int continue_split = 0;
644 struct dwc2_qtd *qtd;
645
646 if (dbg_qh(qh))
647 dev_vdbg(hsotg->dev, " %s(%p,%p,%d)\n", __func__,
648 hsotg, qh, free_qtd);
649
650 if (list_empty(&qh->qtd_list)) {
651 dev_dbg(hsotg->dev, "## QTD list empty ##\n");
652 goto no_qtd;
653 }
654
655 qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
656
657 if (qtd->complete_split)
658 continue_split = 1;
659 else if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_MID ||
660 qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_END)
661 continue_split = 1;
662
663 if (free_qtd) {
664 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
665 continue_split = 0;
666 }
667
668no_qtd:
669 qh->channel = NULL;
670 dwc2_hcd_qh_deactivate(hsotg, qh, continue_split);
671}
672
673/**
674 * dwc2_release_channel() - Releases a host channel for use by other transfers
675 *
676 * @hsotg: The HCD state structure
677 * @chan: The host channel to release
678 * @qtd: The QTD associated with the host channel. This QTD may be
679 * freed if the transfer is complete or an error has occurred.
680 * @halt_status: Reason the channel is being released. This status
681 * determines the actions taken by this function.
682 *
683 * Also attempts to select and queue more transactions since at least one host
684 * channel is available.
685 */
686static void dwc2_release_channel(struct dwc2_hsotg *hsotg,
687 struct dwc2_host_chan *chan,
688 struct dwc2_qtd *qtd,
689 enum dwc2_halt_status halt_status)
690{
691 enum dwc2_transaction_type tr_type;
692 u32 haintmsk;
693 int free_qtd = 0;
694
695 if (dbg_hc(chan))
696 dev_vdbg(hsotg->dev, " %s: channel %d, halt_status %d\n",
697 __func__, chan->hc_num, halt_status);
698
699 switch (halt_status) {
700 case DWC2_HC_XFER_URB_COMPLETE:
701 free_qtd = 1;
702 break;
703 case DWC2_HC_XFER_AHB_ERR:
704 case DWC2_HC_XFER_STALL:
705 case DWC2_HC_XFER_BABBLE_ERR:
706 free_qtd = 1;
707 break;
708 case DWC2_HC_XFER_XACT_ERR:
709 if (qtd && qtd->error_count >= 3) {
710 dev_vdbg(hsotg->dev,
711 " Complete URB with transaction error\n");
712 free_qtd = 1;
713 dwc2_host_complete(hsotg, qtd, -EPROTO);
714 }
715 break;
716 case DWC2_HC_XFER_URB_DEQUEUE:
717 /*
718 * The QTD has already been removed and the QH has been
719 * deactivated. Don't want to do anything except release the
720 * host channel and try to queue more transfers.
721 */
722 goto cleanup;
723 case DWC2_HC_XFER_PERIODIC_INCOMPLETE:
724 dev_vdbg(hsotg->dev, " Complete URB with I/O error\n");
725 free_qtd = 1;
726 dwc2_host_complete(hsotg, qtd, -EIO);
727 break;
728 case DWC2_HC_XFER_NO_HALT_STATUS:
729 default:
730 break;
731 }
732
733 dwc2_deactivate_qh(hsotg, chan->qh, free_qtd);
734
735cleanup:
736 /*
737 * Release the host channel for use by other transfers. The cleanup
738 * function clears the channel interrupt enables and conditions, so
739 * there's no need to clear the Channel Halted interrupt separately.
740 */
741 if (!list_empty(&chan->hc_list_entry))
742 list_del(&chan->hc_list_entry);
743 dwc2_hc_cleanup(hsotg, chan);
744 list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
745
746 if (hsotg->params.uframe_sched > 0) {
747 hsotg->available_host_channels++;
748 } else {
749 switch (chan->ep_type) {
750 case USB_ENDPOINT_XFER_CONTROL:
751 case USB_ENDPOINT_XFER_BULK:
752 hsotg->non_periodic_channels--;
753 break;
754 default:
755 /*
756 * Don't release reservations for periodic channels
757 * here. That's done when a periodic transfer is
758 * descheduled (i.e. when the QH is removed from the
759 * periodic schedule).
760 */
761 break;
762 }
763 }
764
765 haintmsk = dwc2_readl(hsotg->regs + HAINTMSK);
766 haintmsk &= ~(1 << chan->hc_num);
767 dwc2_writel(haintmsk, hsotg->regs + HAINTMSK);
768
769 /* Try to queue more transfers now that there's a free channel */
770 tr_type = dwc2_hcd_select_transactions(hsotg);
771 if (tr_type != DWC2_TRANSACTION_NONE)
772 dwc2_hcd_queue_transactions(hsotg, tr_type);
773}
774
775/*
776 * Halts a host channel. If the channel cannot be halted immediately because
777 * the request queue is full, this function ensures that the FIFO empty
778 * interrupt for the appropriate queue is enabled so that the halt request can
779 * be queued when there is space in the request queue.
780 *
781 * This function may also be called in DMA mode. In that case, the channel is
782 * simply released since the core always halts the channel automatically in
783 * DMA mode.
784 */
785static void dwc2_halt_channel(struct dwc2_hsotg *hsotg,
786 struct dwc2_host_chan *chan, struct dwc2_qtd *qtd,
787 enum dwc2_halt_status halt_status)
788{
789 if (dbg_hc(chan))
790 dev_vdbg(hsotg->dev, "%s()\n", __func__);
791
792 if (hsotg->params.host_dma > 0) {
793 if (dbg_hc(chan))
794 dev_vdbg(hsotg->dev, "DMA enabled\n");
795 dwc2_release_channel(hsotg, chan, qtd, halt_status);
796 return;
797 }
798
799 /* Slave mode processing */
800 dwc2_hc_halt(hsotg, chan, halt_status);
801
802 if (chan->halt_on_queue) {
803 u32 gintmsk;
804
805 dev_vdbg(hsotg->dev, "Halt on queue\n");
806 if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
807 chan->ep_type == USB_ENDPOINT_XFER_BULK) {
808 dev_vdbg(hsotg->dev, "control/bulk\n");
809 /*
810 * Make sure the Non-periodic Tx FIFO empty interrupt
811 * is enabled so that the non-periodic schedule will
812 * be processed
813 */
814 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
815 gintmsk |= GINTSTS_NPTXFEMP;
816 dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
817 } else {
818 dev_vdbg(hsotg->dev, "isoc/intr\n");
819 /*
820 * Move the QH from the periodic queued schedule to
821 * the periodic assigned schedule. This allows the
822 * halt to be queued when the periodic schedule is
823 * processed.
824 */
825 list_move_tail(&chan->qh->qh_list_entry,
826 &hsotg->periodic_sched_assigned);
827
828 /*
829 * Make sure the Periodic Tx FIFO Empty interrupt is
830 * enabled so that the periodic schedule will be
831 * processed
832 */
833 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
834 gintmsk |= GINTSTS_PTXFEMP;
835 dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
836 }
837 }
838}
839
840/*
841 * Performs common cleanup for non-periodic transfers after a Transfer
842 * Complete interrupt. This function should be called after any endpoint type
843 * specific handling is finished to release the host channel.
844 */
845static void dwc2_complete_non_periodic_xfer(struct dwc2_hsotg *hsotg,
846 struct dwc2_host_chan *chan,
847 int chnum, struct dwc2_qtd *qtd,
848 enum dwc2_halt_status halt_status)
849{
850 dev_vdbg(hsotg->dev, "%s()\n", __func__);
851
852 qtd->error_count = 0;
853
854 if (chan->hcint & HCINTMSK_NYET) {
855 /*
856 * Got a NYET on the last transaction of the transfer. This
857 * means that the endpoint should be in the PING state at the
858 * beginning of the next transfer.
859 */
860 dev_vdbg(hsotg->dev, "got NYET\n");
861 chan->qh->ping_state = 1;
862 }
863
864 /*
865 * Always halt and release the host channel to make it available for
866 * more transfers. There may still be more phases for a control
867 * transfer or more data packets for a bulk transfer at this point,
868 * but the host channel is still halted. A channel will be reassigned
869 * to the transfer when the non-periodic schedule is processed after
870 * the channel is released. This allows transactions to be queued
871 * properly via dwc2_hcd_queue_transactions, which also enables the
872 * Tx FIFO Empty interrupt if necessary.
873 */
874 if (chan->ep_is_in) {
875 /*
876 * IN transfers in Slave mode require an explicit disable to
877 * halt the channel. (In DMA mode, this call simply releases
878 * the channel.)
879 */
880 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
881 } else {
882 /*
883 * The channel is automatically disabled by the core for OUT
884 * transfers in Slave mode
885 */
886 dwc2_release_channel(hsotg, chan, qtd, halt_status);
887 }
888}
889
890/*
891 * Performs common cleanup for periodic transfers after a Transfer Complete
892 * interrupt. This function should be called after any endpoint type specific
893 * handling is finished to release the host channel.
894 */
895static void dwc2_complete_periodic_xfer(struct dwc2_hsotg *hsotg,
896 struct dwc2_host_chan *chan, int chnum,
897 struct dwc2_qtd *qtd,
898 enum dwc2_halt_status halt_status)
899{
900 u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
901
902 qtd->error_count = 0;
903
904 if (!chan->ep_is_in || (hctsiz & TSIZ_PKTCNT_MASK) == 0)
905 /* Core halts channel in these cases */
906 dwc2_release_channel(hsotg, chan, qtd, halt_status);
907 else
908 /* Flush any outstanding requests from the Tx queue */
909 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
910}
911
912static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg,
913 struct dwc2_host_chan *chan, int chnum,
914 struct dwc2_qtd *qtd)
915{
916 struct dwc2_hcd_iso_packet_desc *frame_desc;
917 u32 len;
918 u32 hctsiz;
919 u32 pid;
920
921 if (!qtd->urb)
922 return 0;
923
924 frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
925 len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
926 DWC2_HC_XFER_COMPLETE, NULL);
927 if (!len) {
928 qtd->complete_split = 0;
929 qtd->isoc_split_offset = 0;
930 return 0;
931 }
932
933 frame_desc->actual_length += len;
934
935 qtd->isoc_split_offset += len;
936
937 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
938 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
939
940 if (frame_desc->actual_length >= frame_desc->length || pid == 0) {
941 frame_desc->status = 0;
942 qtd->isoc_frame_index++;
943 qtd->complete_split = 0;
944 qtd->isoc_split_offset = 0;
945 }
946
947 if (qtd->isoc_frame_index == qtd->urb->packet_count) {
948 dwc2_host_complete(hsotg, qtd, 0);
949 dwc2_release_channel(hsotg, chan, qtd,
950 DWC2_HC_XFER_URB_COMPLETE);
951 } else {
952 dwc2_release_channel(hsotg, chan, qtd,
953 DWC2_HC_XFER_NO_HALT_STATUS);
954 }
955
956 return 1; /* Indicates that channel released */
957}
958
959/*
960 * Handles a host channel Transfer Complete interrupt. This handler may be
961 * called in either DMA mode or Slave mode.
962 */
963static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg,
964 struct dwc2_host_chan *chan, int chnum,
965 struct dwc2_qtd *qtd)
966{
967 struct dwc2_hcd_urb *urb = qtd->urb;
968 enum dwc2_halt_status halt_status = DWC2_HC_XFER_COMPLETE;
969 int pipe_type;
970 int urb_xfer_done;
971
972 if (dbg_hc(chan))
973 dev_vdbg(hsotg->dev,
974 "--Host Channel %d Interrupt: Transfer Complete--\n",
975 chnum);
976
977 if (!urb)
978 goto handle_xfercomp_done;
979
980 pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
981
982 if (hsotg->params.dma_desc_enable > 0) {
983 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, halt_status);
984 if (pipe_type == USB_ENDPOINT_XFER_ISOC)
985 /* Do not disable the interrupt, just clear it */
986 return;
987 goto handle_xfercomp_done;
988 }
989
990 /* Handle xfer complete on CSPLIT */
991 if (chan->qh->do_split) {
992 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in &&
993 hsotg->params.host_dma > 0) {
994 if (qtd->complete_split &&
995 dwc2_xfercomp_isoc_split_in(hsotg, chan, chnum,
996 qtd))
997 goto handle_xfercomp_done;
998 } else {
999 qtd->complete_split = 0;
1000 }
1001 }
1002
1003 /* Update the QTD and URB states */
1004 switch (pipe_type) {
1005 case USB_ENDPOINT_XFER_CONTROL:
1006 switch (qtd->control_phase) {
1007 case DWC2_CONTROL_SETUP:
1008 if (urb->length > 0)
1009 qtd->control_phase = DWC2_CONTROL_DATA;
1010 else
1011 qtd->control_phase = DWC2_CONTROL_STATUS;
1012 dev_vdbg(hsotg->dev,
1013 " Control setup transaction done\n");
1014 halt_status = DWC2_HC_XFER_COMPLETE;
1015 break;
1016 case DWC2_CONTROL_DATA:
1017 urb_xfer_done = dwc2_update_urb_state(hsotg, chan,
1018 chnum, urb, qtd);
1019 if (urb_xfer_done) {
1020 qtd->control_phase = DWC2_CONTROL_STATUS;
1021 dev_vdbg(hsotg->dev,
1022 " Control data transfer done\n");
1023 } else {
1024 dwc2_hcd_save_data_toggle(hsotg, chan, chnum,
1025 qtd);
1026 }
1027 halt_status = DWC2_HC_XFER_COMPLETE;
1028 break;
1029 case DWC2_CONTROL_STATUS:
1030 dev_vdbg(hsotg->dev, " Control transfer complete\n");
1031 if (urb->status == -EINPROGRESS)
1032 urb->status = 0;
1033 dwc2_host_complete(hsotg, qtd, urb->status);
1034 halt_status = DWC2_HC_XFER_URB_COMPLETE;
1035 break;
1036 }
1037
1038 dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd,
1039 halt_status);
1040 break;
1041 case USB_ENDPOINT_XFER_BULK:
1042 dev_vdbg(hsotg->dev, " Bulk transfer complete\n");
1043 urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb,
1044 qtd);
1045 if (urb_xfer_done) {
1046 dwc2_host_complete(hsotg, qtd, urb->status);
1047 halt_status = DWC2_HC_XFER_URB_COMPLETE;
1048 } else {
1049 halt_status = DWC2_HC_XFER_COMPLETE;
1050 }
1051
1052 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1053 dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd,
1054 halt_status);
1055 break;
1056 case USB_ENDPOINT_XFER_INT:
1057 dev_vdbg(hsotg->dev, " Interrupt transfer complete\n");
1058 urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb,
1059 qtd);
1060
1061 /*
1062 * Interrupt URB is done on the first transfer complete
1063 * interrupt
1064 */
1065 if (urb_xfer_done) {
1066 dwc2_host_complete(hsotg, qtd, urb->status);
1067 halt_status = DWC2_HC_XFER_URB_COMPLETE;
1068 } else {
1069 halt_status = DWC2_HC_XFER_COMPLETE;
1070 }
1071
1072 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1073 dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd,
1074 halt_status);
1075 break;
1076 case USB_ENDPOINT_XFER_ISOC:
1077 if (dbg_perio())
1078 dev_vdbg(hsotg->dev, " Isochronous transfer complete\n");
1079 if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_ALL)
1080 halt_status = dwc2_update_isoc_urb_state(hsotg, chan,
1081 chnum, qtd, DWC2_HC_XFER_COMPLETE);
1082 dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd,
1083 halt_status);
1084 break;
1085 }
1086
1087handle_xfercomp_done:
1088 disable_hc_int(hsotg, chnum, HCINTMSK_XFERCOMPL);
1089}
1090
1091/*
1092 * Handles a host channel STALL interrupt. This handler may be called in
1093 * either DMA mode or Slave mode.
1094 */
1095static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg,
1096 struct dwc2_host_chan *chan, int chnum,
1097 struct dwc2_qtd *qtd)
1098{
1099 struct dwc2_hcd_urb *urb = qtd->urb;
1100 int pipe_type;
1101
1102 dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: STALL Received--\n",
1103 chnum);
1104
1105 if (hsotg->params.dma_desc_enable > 0) {
1106 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1107 DWC2_HC_XFER_STALL);
1108 goto handle_stall_done;
1109 }
1110
1111 if (!urb)
1112 goto handle_stall_halt;
1113
1114 pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
1115
1116 if (pipe_type == USB_ENDPOINT_XFER_CONTROL)
1117 dwc2_host_complete(hsotg, qtd, -EPIPE);
1118
1119 if (pipe_type == USB_ENDPOINT_XFER_BULK ||
1120 pipe_type == USB_ENDPOINT_XFER_INT) {
1121 dwc2_host_complete(hsotg, qtd, -EPIPE);
1122 /*
1123 * USB protocol requires resetting the data toggle for bulk
1124 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
1125 * setup command is issued to the endpoint. Anticipate the
1126 * CLEAR_FEATURE command since a STALL has occurred and reset
1127 * the data toggle now.
1128 */
1129 chan->qh->data_toggle = 0;
1130 }
1131
1132handle_stall_halt:
1133 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_STALL);
1134
1135handle_stall_done:
1136 disable_hc_int(hsotg, chnum, HCINTMSK_STALL);
1137}
1138
1139/*
1140 * Updates the state of the URB when a transfer has been stopped due to an
1141 * abnormal condition before the transfer completes. Modifies the
1142 * actual_length field of the URB to reflect the number of bytes that have
1143 * actually been transferred via the host channel.
1144 */
1145static void dwc2_update_urb_state_abn(struct dwc2_hsotg *hsotg,
1146 struct dwc2_host_chan *chan, int chnum,
1147 struct dwc2_hcd_urb *urb,
1148 struct dwc2_qtd *qtd,
1149 enum dwc2_halt_status halt_status)
1150{
1151 u32 xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum,
1152 qtd, halt_status, NULL);
1153 u32 hctsiz;
1154
1155 if (urb->actual_length + xfer_length > urb->length) {
1156 dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__);
1157 xfer_length = urb->length - urb->actual_length;
1158 }
1159
1160 urb->actual_length += xfer_length;
1161
1162 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
1163 dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
1164 __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
1165 dev_vdbg(hsotg->dev, " chan->start_pkt_count %d\n",
1166 chan->start_pkt_count);
1167 dev_vdbg(hsotg->dev, " hctsiz.pktcnt %d\n",
1168 (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT);
1169 dev_vdbg(hsotg->dev, " chan->max_packet %d\n", chan->max_packet);
1170 dev_vdbg(hsotg->dev, " bytes_transferred %d\n",
1171 xfer_length);
1172 dev_vdbg(hsotg->dev, " urb->actual_length %d\n",
1173 urb->actual_length);
1174 dev_vdbg(hsotg->dev, " urb->transfer_buffer_length %d\n",
1175 urb->length);
1176}
1177
1178/*
1179 * Handles a host channel NAK interrupt. This handler may be called in either
1180 * DMA mode or Slave mode.
1181 */
1182static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg,
1183 struct dwc2_host_chan *chan, int chnum,
1184 struct dwc2_qtd *qtd)
1185{
1186 if (!qtd) {
1187 dev_dbg(hsotg->dev, "%s: qtd is NULL\n", __func__);
1188 return;
1189 }
1190
1191 if (!qtd->urb) {
1192 dev_dbg(hsotg->dev, "%s: qtd->urb is NULL\n", __func__);
1193 return;
1194 }
1195
1196 if (dbg_hc(chan))
1197 dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NAK Received--\n",
1198 chnum);
1199
1200 /*
1201 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
1202 * interrupt. Re-start the SSPLIT transfer.
1203 */
1204 if (chan->do_split) {
1205 if (chan->complete_split)
1206 qtd->error_count = 0;
1207 qtd->complete_split = 0;
1208 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
1209 goto handle_nak_done;
1210 }
1211
1212 switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
1213 case USB_ENDPOINT_XFER_CONTROL:
1214 case USB_ENDPOINT_XFER_BULK:
1215 if (hsotg->params.host_dma > 0 && chan->ep_is_in) {
1216 /*
1217 * NAK interrupts are enabled on bulk/control IN
1218 * transfers in DMA mode for the sole purpose of
1219 * resetting the error count after a transaction error
1220 * occurs. The core will continue transferring data.
1221 */
1222 qtd->error_count = 0;
1223 break;
1224 }
1225
1226 /*
1227 * NAK interrupts normally occur during OUT transfers in DMA
1228 * or Slave mode. For IN transfers, more requests will be
1229 * queued as request queue space is available.
1230 */
1231 qtd->error_count = 0;
1232
1233 if (!chan->qh->ping_state) {
1234 dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
1235 qtd, DWC2_HC_XFER_NAK);
1236 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1237
1238 if (chan->speed == USB_SPEED_HIGH)
1239 chan->qh->ping_state = 1;
1240 }
1241
1242 /*
1243 * Halt the channel so the transfer can be re-started from
1244 * the appropriate point or the PING protocol will
1245 * start/continue
1246 */
1247 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
1248 break;
1249 case USB_ENDPOINT_XFER_INT:
1250 qtd->error_count = 0;
1251 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
1252 break;
1253 case USB_ENDPOINT_XFER_ISOC:
1254 /* Should never get called for isochronous transfers */
1255 dev_err(hsotg->dev, "NACK interrupt for ISOC transfer\n");
1256 break;
1257 }
1258
1259handle_nak_done:
1260 disable_hc_int(hsotg, chnum, HCINTMSK_NAK);
1261}
1262
1263/*
1264 * Handles a host channel ACK interrupt. This interrupt is enabled when
1265 * performing the PING protocol in Slave mode, when errors occur during
1266 * either Slave mode or DMA mode, and during Start Split transactions.
1267 */
1268static void dwc2_hc_ack_intr(struct dwc2_hsotg *hsotg,
1269 struct dwc2_host_chan *chan, int chnum,
1270 struct dwc2_qtd *qtd)
1271{
1272 struct dwc2_hcd_iso_packet_desc *frame_desc;
1273
1274 if (dbg_hc(chan))
1275 dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: ACK Received--\n",
1276 chnum);
1277
1278 if (chan->do_split) {
1279 /* Handle ACK on SSPLIT. ACK should not occur in CSPLIT. */
1280 if (!chan->ep_is_in &&
1281 chan->data_pid_start != DWC2_HC_PID_SETUP)
1282 qtd->ssplit_out_xfer_count = chan->xfer_len;
1283
1284 if (chan->ep_type != USB_ENDPOINT_XFER_ISOC || chan->ep_is_in) {
1285 qtd->complete_split = 1;
1286 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK);
1287 } else {
1288 /* ISOC OUT */
1289 switch (chan->xact_pos) {
1290 case DWC2_HCSPLT_XACTPOS_ALL:
1291 break;
1292 case DWC2_HCSPLT_XACTPOS_END:
1293 qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL;
1294 qtd->isoc_split_offset = 0;
1295 break;
1296 case DWC2_HCSPLT_XACTPOS_BEGIN:
1297 case DWC2_HCSPLT_XACTPOS_MID:
1298 /*
1299 * For BEGIN or MID, calculate the length for
1300 * the next microframe to determine the correct
1301 * SSPLIT token, either MID or END
1302 */
1303 frame_desc = &qtd->urb->iso_descs[
1304 qtd->isoc_frame_index];
1305 qtd->isoc_split_offset += 188;
1306
1307 if (frame_desc->length - qtd->isoc_split_offset
1308 <= 188)
1309 qtd->isoc_split_pos =
1310 DWC2_HCSPLT_XACTPOS_END;
1311 else
1312 qtd->isoc_split_pos =
1313 DWC2_HCSPLT_XACTPOS_MID;
1314 break;
1315 }
1316 }
1317 } else {
1318 qtd->error_count = 0;
1319
1320 if (chan->qh->ping_state) {
1321 chan->qh->ping_state = 0;
1322 /*
1323 * Halt the channel so the transfer can be re-started
1324 * from the appropriate point. This only happens in
1325 * Slave mode. In DMA mode, the ping_state is cleared
1326 * when the transfer is started because the core
1327 * automatically executes the PING, then the transfer.
1328 */
1329 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK);
1330 }
1331 }
1332
1333 /*
1334 * If the ACK occurred when _not_ in the PING state, let the channel
1335 * continue transferring data after clearing the error count
1336 */
1337 disable_hc_int(hsotg, chnum, HCINTMSK_ACK);
1338}
1339
1340/*
1341 * Handles a host channel NYET interrupt. This interrupt should only occur on
1342 * Bulk and Control OUT endpoints and for complete split transactions. If a
1343 * NYET occurs at the same time as a Transfer Complete interrupt, it is
1344 * handled in the xfercomp interrupt handler, not here. This handler may be
1345 * called in either DMA mode or Slave mode.
1346 */
1347static void dwc2_hc_nyet_intr(struct dwc2_hsotg *hsotg,
1348 struct dwc2_host_chan *chan, int chnum,
1349 struct dwc2_qtd *qtd)
1350{
1351 if (dbg_hc(chan))
1352 dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NYET Received--\n",
1353 chnum);
1354
1355 /*
1356 * NYET on CSPLIT
1357 * re-do the CSPLIT immediately on non-periodic
1358 */
1359 if (chan->do_split && chan->complete_split) {
1360 if (chan->ep_is_in && chan->ep_type == USB_ENDPOINT_XFER_ISOC &&
1361 hsotg->params.host_dma > 0) {
1362 qtd->complete_split = 0;
1363 qtd->isoc_split_offset = 0;
1364 qtd->isoc_frame_index++;
1365 if (qtd->urb &&
1366 qtd->isoc_frame_index == qtd->urb->packet_count) {
1367 dwc2_host_complete(hsotg, qtd, 0);
1368 dwc2_release_channel(hsotg, chan, qtd,
1369 DWC2_HC_XFER_URB_COMPLETE);
1370 } else {
1371 dwc2_release_channel(hsotg, chan, qtd,
1372 DWC2_HC_XFER_NO_HALT_STATUS);
1373 }
1374 goto handle_nyet_done;
1375 }
1376
1377 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1378 chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
1379 struct dwc2_qh *qh = chan->qh;
1380 bool past_end;
1381
1382 if (hsotg->params.uframe_sched <= 0) {
1383 int frnum = dwc2_hcd_get_frame_number(hsotg);
1384
1385 /* Don't have num_hs_transfers; simple logic */
1386 past_end = dwc2_full_frame_num(frnum) !=
1387 dwc2_full_frame_num(qh->next_active_frame);
1388 } else {
1389 int end_frnum;
1390
1391 /*
1392 * Figure out the end frame based on schedule.
1393 *
1394 * We don't want to go on trying again and again
1395 * forever. Let's stop when we've done all the
1396 * transfers that were scheduled.
1397 *
1398 * We're going to be comparing start_active_frame
1399 * and next_active_frame, both of which are 1
1400 * before the time the packet goes on the wire,
1401 * so that cancels out. Basically if had 1
1402 * transfer and we saw 1 NYET then we're done.
1403 * We're getting a NYET here so if next >=
1404 * (start + num_transfers) we're done. The
1405 * complexity is that for all but ISOC_OUT we
1406 * skip one slot.
1407 */
1408 end_frnum = dwc2_frame_num_inc(
1409 qh->start_active_frame,
1410 qh->num_hs_transfers);
1411
1412 if (qh->ep_type != USB_ENDPOINT_XFER_ISOC ||
1413 qh->ep_is_in)
1414 end_frnum =
1415 dwc2_frame_num_inc(end_frnum, 1);
1416
1417 past_end = dwc2_frame_num_le(
1418 end_frnum, qh->next_active_frame);
1419 }
1420
1421 if (past_end) {
1422 /* Treat this as a transaction error. */
1423#if 0
1424 /*
1425 * Todo: Fix system performance so this can
1426 * be treated as an error. Right now complete
1427 * splits cannot be scheduled precisely enough
1428 * due to other system activity, so this error
1429 * occurs regularly in Slave mode.
1430 */
1431 qtd->error_count++;
1432#endif
1433 qtd->complete_split = 0;
1434 dwc2_halt_channel(hsotg, chan, qtd,
1435 DWC2_HC_XFER_XACT_ERR);
1436 /* Todo: add support for isoc release */
1437 goto handle_nyet_done;
1438 }
1439 }
1440
1441 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET);
1442 goto handle_nyet_done;
1443 }
1444
1445 chan->qh->ping_state = 1;
1446 qtd->error_count = 0;
1447
1448 dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, qtd,
1449 DWC2_HC_XFER_NYET);
1450 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1451
1452 /*
1453 * Halt the channel and re-start the transfer so the PING protocol
1454 * will start
1455 */
1456 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET);
1457
1458handle_nyet_done:
1459 disable_hc_int(hsotg, chnum, HCINTMSK_NYET);
1460}
1461
1462/*
1463 * Handles a host channel babble interrupt. This handler may be called in
1464 * either DMA mode or Slave mode.
1465 */
1466static void dwc2_hc_babble_intr(struct dwc2_hsotg *hsotg,
1467 struct dwc2_host_chan *chan, int chnum,
1468 struct dwc2_qtd *qtd)
1469{
1470 dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Babble Error--\n",
1471 chnum);
1472
1473 dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1474
1475 if (hsotg->params.dma_desc_enable > 0) {
1476 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1477 DWC2_HC_XFER_BABBLE_ERR);
1478 goto disable_int;
1479 }
1480
1481 if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
1482 dwc2_host_complete(hsotg, qtd, -EOVERFLOW);
1483 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_BABBLE_ERR);
1484 } else {
1485 enum dwc2_halt_status halt_status;
1486
1487 halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum,
1488 qtd, DWC2_HC_XFER_BABBLE_ERR);
1489 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
1490 }
1491
1492disable_int:
1493 disable_hc_int(hsotg, chnum, HCINTMSK_BBLERR);
1494}
1495
1496/*
1497 * Handles a host channel AHB error interrupt. This handler is only called in
1498 * DMA mode.
1499 */
1500static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg,
1501 struct dwc2_host_chan *chan, int chnum,
1502 struct dwc2_qtd *qtd)
1503{
1504 struct dwc2_hcd_urb *urb = qtd->urb;
1505 char *pipetype, *speed;
1506 u32 hcchar;
1507 u32 hcsplt;
1508 u32 hctsiz;
1509 u32 hc_dma;
1510
1511 dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: AHB Error--\n",
1512 chnum);
1513
1514 if (!urb)
1515 goto handle_ahberr_halt;
1516
1517 dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1518
1519 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
1520 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum));
1521 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
1522 hc_dma = dwc2_readl(hsotg->regs + HCDMA(chnum));
1523
1524 dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum);
1525 dev_err(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt);
1526 dev_err(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", hctsiz, hc_dma);
1527 dev_err(hsotg->dev, " Device address: %d\n",
1528 dwc2_hcd_get_dev_addr(&urb->pipe_info));
1529 dev_err(hsotg->dev, " Endpoint: %d, %s\n",
1530 dwc2_hcd_get_ep_num(&urb->pipe_info),
1531 dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
1532
1533 switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
1534 case USB_ENDPOINT_XFER_CONTROL:
1535 pipetype = "CONTROL";
1536 break;
1537 case USB_ENDPOINT_XFER_BULK:
1538 pipetype = "BULK";
1539 break;
1540 case USB_ENDPOINT_XFER_INT:
1541 pipetype = "INTERRUPT";
1542 break;
1543 case USB_ENDPOINT_XFER_ISOC:
1544 pipetype = "ISOCHRONOUS";
1545 break;
1546 default:
1547 pipetype = "UNKNOWN";
1548 break;
1549 }
1550
1551 dev_err(hsotg->dev, " Endpoint type: %s\n", pipetype);
1552
1553 switch (chan->speed) {
1554 case USB_SPEED_HIGH:
1555 speed = "HIGH";
1556 break;
1557 case USB_SPEED_FULL:
1558 speed = "FULL";
1559 break;
1560 case USB_SPEED_LOW:
1561 speed = "LOW";
1562 break;
1563 default:
1564 speed = "UNKNOWN";
1565 break;
1566 }
1567
1568 dev_err(hsotg->dev, " Speed: %s\n", speed);
1569
1570 dev_err(hsotg->dev, " Max packet size: %d\n",
1571 dwc2_hcd_get_mps(&urb->pipe_info));
1572 dev_err(hsotg->dev, " Data buffer length: %d\n", urb->length);
1573 dev_err(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n",
1574 urb->buf, (unsigned long)urb->dma);
1575 dev_err(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n",
1576 urb->setup_packet, (unsigned long)urb->setup_dma);
1577 dev_err(hsotg->dev, " Interval: %d\n", urb->interval);
1578
1579 /* Core halts the channel for Descriptor DMA mode */
1580 if (hsotg->params.dma_desc_enable > 0) {
1581 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1582 DWC2_HC_XFER_AHB_ERR);
1583 goto handle_ahberr_done;
1584 }
1585
1586 dwc2_host_complete(hsotg, qtd, -EIO);
1587
1588handle_ahberr_halt:
1589 /*
1590 * Force a channel halt. Don't call dwc2_halt_channel because that won't
1591 * write to the HCCHARn register in DMA mode to force the halt.
1592 */
1593 dwc2_hc_halt(hsotg, chan, DWC2_HC_XFER_AHB_ERR);
1594
1595handle_ahberr_done:
1596 disable_hc_int(hsotg, chnum, HCINTMSK_AHBERR);
1597}
1598
1599/*
1600 * Handles a host channel transaction error interrupt. This handler may be
1601 * called in either DMA mode or Slave mode.
1602 */
1603static void dwc2_hc_xacterr_intr(struct dwc2_hsotg *hsotg,
1604 struct dwc2_host_chan *chan, int chnum,
1605 struct dwc2_qtd *qtd)
1606{
1607 dev_dbg(hsotg->dev,
1608 "--Host Channel %d Interrupt: Transaction Error--\n", chnum);
1609
1610 dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1611
1612 if (hsotg->params.dma_desc_enable > 0) {
1613 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1614 DWC2_HC_XFER_XACT_ERR);
1615 goto handle_xacterr_done;
1616 }
1617
1618 switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
1619 case USB_ENDPOINT_XFER_CONTROL:
1620 case USB_ENDPOINT_XFER_BULK:
1621 qtd->error_count++;
1622 if (!chan->qh->ping_state) {
1623
1624 dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
1625 qtd, DWC2_HC_XFER_XACT_ERR);
1626 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1627 if (!chan->ep_is_in && chan->speed == USB_SPEED_HIGH)
1628 chan->qh->ping_state = 1;
1629 }
1630
1631 /*
1632 * Halt the channel so the transfer can be re-started from
1633 * the appropriate point or the PING protocol will start
1634 */
1635 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
1636 break;
1637 case USB_ENDPOINT_XFER_INT:
1638 qtd->error_count++;
1639 if (chan->do_split && chan->complete_split)
1640 qtd->complete_split = 0;
1641 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
1642 break;
1643 case USB_ENDPOINT_XFER_ISOC:
1644 {
1645 enum dwc2_halt_status halt_status;
1646
1647 halt_status = dwc2_update_isoc_urb_state(hsotg, chan,
1648 chnum, qtd, DWC2_HC_XFER_XACT_ERR);
1649 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
1650 }
1651 break;
1652 }
1653
1654handle_xacterr_done:
1655 disable_hc_int(hsotg, chnum, HCINTMSK_XACTERR);
1656}
1657
1658/*
1659 * Handles a host channel frame overrun interrupt. This handler may be called
1660 * in either DMA mode or Slave mode.
1661 */
1662static void dwc2_hc_frmovrun_intr(struct dwc2_hsotg *hsotg,
1663 struct dwc2_host_chan *chan, int chnum,
1664 struct dwc2_qtd *qtd)
1665{
1666 enum dwc2_halt_status halt_status;
1667
1668 if (dbg_hc(chan))
1669 dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Frame Overrun--\n",
1670 chnum);
1671
1672 dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1673
1674 switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
1675 case USB_ENDPOINT_XFER_CONTROL:
1676 case USB_ENDPOINT_XFER_BULK:
1677 break;
1678 case USB_ENDPOINT_XFER_INT:
1679 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_FRAME_OVERRUN);
1680 break;
1681 case USB_ENDPOINT_XFER_ISOC:
1682 halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum,
1683 qtd, DWC2_HC_XFER_FRAME_OVERRUN);
1684 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
1685 break;
1686 }
1687
1688 disable_hc_int(hsotg, chnum, HCINTMSK_FRMOVRUN);
1689}
1690
1691/*
1692 * Handles a host channel data toggle error interrupt. This handler may be
1693 * called in either DMA mode or Slave mode.
1694 */
1695static void dwc2_hc_datatglerr_intr(struct dwc2_hsotg *hsotg,
1696 struct dwc2_host_chan *chan, int chnum,
1697 struct dwc2_qtd *qtd)
1698{
1699 dev_dbg(hsotg->dev,
1700 "--Host Channel %d Interrupt: Data Toggle Error--\n", chnum);
1701
1702 if (chan->ep_is_in)
1703 qtd->error_count = 0;
1704 else
1705 dev_err(hsotg->dev,
1706 "Data Toggle Error on OUT transfer, channel %d\n",
1707 chnum);
1708
1709 dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1710 disable_hc_int(hsotg, chnum, HCINTMSK_DATATGLERR);
1711}
1712
1713/*
1714 * For debug only. It checks that a valid halt status is set and that
1715 * HCCHARn.chdis is clear. If there's a problem, corrective action is
1716 * taken and a warning is issued.
1717 *
1718 * Return: true if halt status is ok, false otherwise
1719 */
1720static bool dwc2_halt_status_ok(struct dwc2_hsotg *hsotg,
1721 struct dwc2_host_chan *chan, int chnum,
1722 struct dwc2_qtd *qtd)
1723{
1724#ifdef DEBUG
1725 u32 hcchar;
1726 u32 hctsiz;
1727 u32 hcintmsk;
1728 u32 hcsplt;
1729
1730 if (chan->halt_status == DWC2_HC_XFER_NO_HALT_STATUS) {
1731 /*
1732 * This code is here only as a check. This condition should
1733 * never happen. Ignore the halt if it does occur.
1734 */
1735 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
1736 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
1737 hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
1738 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum));
1739 dev_dbg(hsotg->dev,
1740 "%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n",
1741 __func__);
1742 dev_dbg(hsotg->dev,
1743 "channel %d, hcchar 0x%08x, hctsiz 0x%08x,\n",
1744 chnum, hcchar, hctsiz);
1745 dev_dbg(hsotg->dev,
1746 "hcint 0x%08x, hcintmsk 0x%08x, hcsplt 0x%08x,\n",
1747 chan->hcint, hcintmsk, hcsplt);
1748 if (qtd)
1749 dev_dbg(hsotg->dev, "qtd->complete_split %d\n",
1750 qtd->complete_split);
1751 dev_warn(hsotg->dev,
1752 "%s: no halt status, channel %d, ignoring interrupt\n",
1753 __func__, chnum);
1754 return false;
1755 }
1756
1757 /*
1758 * This code is here only as a check. hcchar.chdis should never be set
1759 * when the halt interrupt occurs. Halt the channel again if it does
1760 * occur.
1761 */
1762 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
1763 if (hcchar & HCCHAR_CHDIS) {
1764 dev_warn(hsotg->dev,
1765 "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n",
1766 __func__, hcchar);
1767 chan->halt_pending = 0;
1768 dwc2_halt_channel(hsotg, chan, qtd, chan->halt_status);
1769 return false;
1770 }
1771#endif
1772
1773 return true;
1774}
1775
1776/*
1777 * Handles a host Channel Halted interrupt in DMA mode. This handler
1778 * determines the reason the channel halted and proceeds accordingly.
1779 */
1780static void dwc2_hc_chhltd_intr_dma(struct dwc2_hsotg *hsotg,
1781 struct dwc2_host_chan *chan, int chnum,
1782 struct dwc2_qtd *qtd)
1783{
1784 u32 hcintmsk;
1785 int out_nak_enh = 0;
1786
1787 if (dbg_hc(chan))
1788 dev_vdbg(hsotg->dev,
1789 "--Host Channel %d Interrupt: DMA Channel Halted--\n",
1790 chnum);
1791
1792 /*
1793 * For core with OUT NAK enhancement, the flow for high-speed
1794 * CONTROL/BULK OUT is handled a little differently
1795 */
1796 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_71a) {
1797 if (chan->speed == USB_SPEED_HIGH && !chan->ep_is_in &&
1798 (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
1799 chan->ep_type == USB_ENDPOINT_XFER_BULK)) {
1800 out_nak_enh = 1;
1801 }
1802 }
1803
1804 if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
1805 (chan->halt_status == DWC2_HC_XFER_AHB_ERR &&
1806 hsotg->params.dma_desc_enable <= 0)) {
1807 if (hsotg->params.dma_desc_enable > 0)
1808 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1809 chan->halt_status);
1810 else
1811 /*
1812 * Just release the channel. A dequeue can happen on a
1813 * transfer timeout. In the case of an AHB Error, the
1814 * channel was forced to halt because there's no way to
1815 * gracefully recover.
1816 */
1817 dwc2_release_channel(hsotg, chan, qtd,
1818 chan->halt_status);
1819 return;
1820 }
1821
1822 hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
1823
1824 if (chan->hcint & HCINTMSK_XFERCOMPL) {
1825 /*
1826 * Todo: This is here because of a possible hardware bug. Spec
1827 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
1828 * interrupt w/ACK bit set should occur, but I only see the
1829 * XFERCOMP bit, even with it masked out. This is a workaround
1830 * for that behavior. Should fix this when hardware is fixed.
1831 */
1832 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && !chan->ep_is_in)
1833 dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
1834 dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd);
1835 } else if (chan->hcint & HCINTMSK_STALL) {
1836 dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
1837 } else if ((chan->hcint & HCINTMSK_XACTERR) &&
1838 hsotg->params.dma_desc_enable <= 0) {
1839 if (out_nak_enh) {
1840 if (chan->hcint &
1841 (HCINTMSK_NYET | HCINTMSK_NAK | HCINTMSK_ACK)) {
1842 dev_vdbg(hsotg->dev,
1843 "XactErr with NYET/NAK/ACK\n");
1844 qtd->error_count = 0;
1845 } else {
1846 dev_vdbg(hsotg->dev,
1847 "XactErr without NYET/NAK/ACK\n");
1848 }
1849 }
1850
1851 /*
1852 * Must handle xacterr before nak or ack. Could get a xacterr
1853 * at the same time as either of these on a BULK/CONTROL OUT
1854 * that started with a PING. The xacterr takes precedence.
1855 */
1856 dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
1857 } else if ((chan->hcint & HCINTMSK_XCS_XACT) &&
1858 hsotg->params.dma_desc_enable > 0) {
1859 dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
1860 } else if ((chan->hcint & HCINTMSK_AHBERR) &&
1861 hsotg->params.dma_desc_enable > 0) {
1862 dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
1863 } else if (chan->hcint & HCINTMSK_BBLERR) {
1864 dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
1865 } else if (chan->hcint & HCINTMSK_FRMOVRUN) {
1866 dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
1867 } else if (!out_nak_enh) {
1868 if (chan->hcint & HCINTMSK_NYET) {
1869 /*
1870 * Must handle nyet before nak or ack. Could get a nyet
1871 * at the same time as either of those on a BULK/CONTROL
1872 * OUT that started with a PING. The nyet takes
1873 * precedence.
1874 */
1875 dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
1876 } else if ((chan->hcint & HCINTMSK_NAK) &&
1877 !(hcintmsk & HCINTMSK_NAK)) {
1878 /*
1879 * If nak is not masked, it's because a non-split IN
1880 * transfer is in an error state. In that case, the nak
1881 * is handled by the nak interrupt handler, not here.
1882 * Handle nak here for BULK/CONTROL OUT transfers, which
1883 * halt on a NAK to allow rewinding the buffer pointer.
1884 */
1885 dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
1886 } else if ((chan->hcint & HCINTMSK_ACK) &&
1887 !(hcintmsk & HCINTMSK_ACK)) {
1888 /*
1889 * If ack is not masked, it's because a non-split IN
1890 * transfer is in an error state. In that case, the ack
1891 * is handled by the ack interrupt handler, not here.
1892 * Handle ack here for split transfers. Start splits
1893 * halt on ACK.
1894 */
1895 dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
1896 } else {
1897 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1898 chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
1899 /*
1900 * A periodic transfer halted with no other
1901 * channel interrupts set. Assume it was halted
1902 * by the core because it could not be completed
1903 * in its scheduled (micro)frame.
1904 */
1905 dev_dbg(hsotg->dev,
1906 "%s: Halt channel %d (assume incomplete periodic transfer)\n",
1907 __func__, chnum);
1908 dwc2_halt_channel(hsotg, chan, qtd,
1909 DWC2_HC_XFER_PERIODIC_INCOMPLETE);
1910 } else {
1911 dev_err(hsotg->dev,
1912 "%s: Channel %d - ChHltd set, but reason is unknown\n",
1913 __func__, chnum);
1914 dev_err(hsotg->dev,
1915 "hcint 0x%08x, intsts 0x%08x\n",
1916 chan->hcint,
1917 dwc2_readl(hsotg->regs + GINTSTS));
1918 goto error;
1919 }
1920 }
1921 } else {
1922 dev_info(hsotg->dev,
1923 "NYET/NAK/ACK/other in non-error case, 0x%08x\n",
1924 chan->hcint);
1925error:
1926 /* Failthrough: use 3-strikes rule */
1927 qtd->error_count++;
1928 dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
1929 qtd, DWC2_HC_XFER_XACT_ERR);
1930 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1931 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
1932 }
1933}
1934
1935/*
1936 * Handles a host channel Channel Halted interrupt
1937 *
1938 * In slave mode, this handler is called only when the driver specifically
1939 * requests a halt. This occurs during handling other host channel interrupts
1940 * (e.g. nak, xacterr, stall, nyet, etc.).
1941 *
1942 * In DMA mode, this is the interrupt that occurs when the core has finished
1943 * processing a transfer on a channel. Other host channel interrupts (except
1944 * ahberr) are disabled in DMA mode.
1945 */
1946static void dwc2_hc_chhltd_intr(struct dwc2_hsotg *hsotg,
1947 struct dwc2_host_chan *chan, int chnum,
1948 struct dwc2_qtd *qtd)
1949{
1950 if (dbg_hc(chan))
1951 dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: Channel Halted--\n",
1952 chnum);
1953
1954 if (hsotg->params.host_dma > 0) {
1955 dwc2_hc_chhltd_intr_dma(hsotg, chan, chnum, qtd);
1956 } else {
1957 if (!dwc2_halt_status_ok(hsotg, chan, chnum, qtd))
1958 return;
1959 dwc2_release_channel(hsotg, chan, qtd, chan->halt_status);
1960 }
1961}
1962
1963/*
1964 * Check if the given qtd is still the top of the list (and thus valid).
1965 *
1966 * If dwc2_hcd_qtd_unlink_and_free() has been called since we grabbed
1967 * the qtd from the top of the list, this will return false (otherwise true).
1968 */
1969static bool dwc2_check_qtd_still_ok(struct dwc2_qtd *qtd, struct dwc2_qh *qh)
1970{
1971 struct dwc2_qtd *cur_head;
1972
1973 if (qh == NULL)
1974 return false;
1975
1976 cur_head = list_first_entry(&qh->qtd_list, struct dwc2_qtd,
1977 qtd_list_entry);
1978 return (cur_head == qtd);
1979}
1980
1981/* Handles interrupt for a specific Host Channel */
1982static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum)
1983{
1984 struct dwc2_qtd *qtd;
1985 struct dwc2_host_chan *chan;
1986 u32 hcint, hcintmsk;
1987
1988 chan = hsotg->hc_ptr_array[chnum];
1989
1990 hcint = dwc2_readl(hsotg->regs + HCINT(chnum));
1991 hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
1992 if (!chan) {
1993 dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
1994 dwc2_writel(hcint, hsotg->regs + HCINT(chnum));
1995 return;
1996 }
1997
1998 if (dbg_hc(chan)) {
1999 dev_vdbg(hsotg->dev, "--Host Channel Interrupt--, Channel %d\n",
2000 chnum);
2001 dev_vdbg(hsotg->dev,
2002 " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
2003 hcint, hcintmsk, hcint & hcintmsk);
2004 }
2005
2006 dwc2_writel(hcint, hsotg->regs + HCINT(chnum));
2007
2008 /*
2009 * If we got an interrupt after someone called
2010 * dwc2_hcd_endpoint_disable() we don't want to crash below
2011 */
2012 if (!chan->qh) {
2013 dev_warn(hsotg->dev, "Interrupt on disabled channel\n");
2014 return;
2015 }
2016
2017 chan->hcint = hcint;
2018 hcint &= hcintmsk;
2019
2020 /*
2021 * If the channel was halted due to a dequeue, the qtd list might
2022 * be empty or at least the first entry will not be the active qtd.
2023 * In this case, take a shortcut and just release the channel.
2024 */
2025 if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) {
2026 /*
2027 * If the channel was halted, this should be the only
2028 * interrupt unmasked
2029 */
2030 WARN_ON(hcint != HCINTMSK_CHHLTD);
2031 if (hsotg->params.dma_desc_enable > 0)
2032 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
2033 chan->halt_status);
2034 else
2035 dwc2_release_channel(hsotg, chan, NULL,
2036 chan->halt_status);
2037 return;
2038 }
2039
2040 if (list_empty(&chan->qh->qtd_list)) {
2041 /*
2042 * TODO: Will this ever happen with the
2043 * DWC2_HC_XFER_URB_DEQUEUE handling above?
2044 */
2045 dev_dbg(hsotg->dev, "## no QTD queued for channel %d ##\n",
2046 chnum);
2047 dev_dbg(hsotg->dev,
2048 " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
2049 chan->hcint, hcintmsk, hcint);
2050 chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
2051 disable_hc_int(hsotg, chnum, HCINTMSK_CHHLTD);
2052 chan->hcint = 0;
2053 return;
2054 }
2055
2056 qtd = list_first_entry(&chan->qh->qtd_list, struct dwc2_qtd,
2057 qtd_list_entry);
2058
2059 if (hsotg->params.host_dma <= 0) {
2060 if ((hcint & HCINTMSK_CHHLTD) && hcint != HCINTMSK_CHHLTD)
2061 hcint &= ~HCINTMSK_CHHLTD;
2062 }
2063
2064 if (hcint & HCINTMSK_XFERCOMPL) {
2065 dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd);
2066 /*
2067 * If NYET occurred at same time as Xfer Complete, the NYET is
2068 * handled by the Xfer Complete interrupt handler. Don't want
2069 * to call the NYET interrupt handler in this case.
2070 */
2071 hcint &= ~HCINTMSK_NYET;
2072 }
2073
2074 if (hcint & HCINTMSK_CHHLTD) {
2075 dwc2_hc_chhltd_intr(hsotg, chan, chnum, qtd);
2076 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2077 goto exit;
2078 }
2079 if (hcint & HCINTMSK_AHBERR) {
2080 dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
2081 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2082 goto exit;
2083 }
2084 if (hcint & HCINTMSK_STALL) {
2085 dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
2086 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2087 goto exit;
2088 }
2089 if (hcint & HCINTMSK_NAK) {
2090 dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
2091 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2092 goto exit;
2093 }
2094 if (hcint & HCINTMSK_ACK) {
2095 dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
2096 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2097 goto exit;
2098 }
2099 if (hcint & HCINTMSK_NYET) {
2100 dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
2101 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2102 goto exit;
2103 }
2104 if (hcint & HCINTMSK_XACTERR) {
2105 dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
2106 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2107 goto exit;
2108 }
2109 if (hcint & HCINTMSK_BBLERR) {
2110 dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
2111 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2112 goto exit;
2113 }
2114 if (hcint & HCINTMSK_FRMOVRUN) {
2115 dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
2116 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2117 goto exit;
2118 }
2119 if (hcint & HCINTMSK_DATATGLERR) {
2120 dwc2_hc_datatglerr_intr(hsotg, chan, chnum, qtd);
2121 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2122 goto exit;
2123 }
2124
2125exit:
2126 chan->hcint = 0;
2127}
2128
2129/*
2130 * This interrupt indicates that one or more host channels has a pending
2131 * interrupt. There are multiple conditions that can cause each host channel
2132 * interrupt. This function determines which conditions have occurred for each
2133 * host channel interrupt and handles them appropriately.
2134 */
2135static void dwc2_hc_intr(struct dwc2_hsotg *hsotg)
2136{
2137 u32 haint;
2138 int i;
2139 struct dwc2_host_chan *chan, *chan_tmp;
2140
2141 haint = dwc2_readl(hsotg->regs + HAINT);
2142 if (dbg_perio()) {
2143 dev_vdbg(hsotg->dev, "%s()\n", __func__);
2144
2145 dev_vdbg(hsotg->dev, "HAINT=%08x\n", haint);
2146 }
2147
2148 /*
2149 * According to USB 2.0 spec section 11.18.8, a host must
2150 * issue complete-split transactions in a microframe for a
2151 * set of full-/low-speed endpoints in the same relative
2152 * order as the start-splits were issued in a microframe for.
2153 */
2154 list_for_each_entry_safe(chan, chan_tmp, &hsotg->split_order,
2155 split_order_list_entry) {
2156 int hc_num = chan->hc_num;
2157
2158 if (haint & (1 << hc_num)) {
2159 dwc2_hc_n_intr(hsotg, hc_num);
2160 haint &= ~(1 << hc_num);
2161 }
2162 }
2163
2164 for (i = 0; i < hsotg->params.host_channels; i++) {
2165 if (haint & (1 << i))
2166 dwc2_hc_n_intr(hsotg, i);
2167 }
2168}
2169
2170/* This function handles interrupts for the HCD */
2171irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg)
2172{
2173 u32 gintsts, dbg_gintsts;
2174 irqreturn_t retval = IRQ_NONE;
2175
2176 if (!dwc2_is_controller_alive(hsotg)) {
2177 dev_warn(hsotg->dev, "Controller is dead\n");
2178 return retval;
2179 }
2180
2181 spin_lock(&hsotg->lock);
2182
2183 /* Check if HOST Mode */
2184 if (dwc2_is_host_mode(hsotg)) {
2185 gintsts = dwc2_read_core_intr(hsotg);
2186 if (!gintsts) {
2187 spin_unlock(&hsotg->lock);
2188 return retval;
2189 }
2190
2191 retval = IRQ_HANDLED;
2192
2193 dbg_gintsts = gintsts;
2194#ifndef DEBUG_SOF
2195 dbg_gintsts &= ~GINTSTS_SOF;
2196#endif
2197 if (!dbg_perio())
2198 dbg_gintsts &= ~(GINTSTS_HCHINT | GINTSTS_RXFLVL |
2199 GINTSTS_PTXFEMP);
2200
2201 /* Only print if there are any non-suppressed interrupts left */
2202 if (dbg_gintsts)
2203 dev_vdbg(hsotg->dev,
2204 "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n",
2205 gintsts);
2206
2207 if (gintsts & GINTSTS_SOF)
2208 dwc2_sof_intr(hsotg);
2209 if (gintsts & GINTSTS_RXFLVL)
2210 dwc2_rx_fifo_level_intr(hsotg);
2211 if (gintsts & GINTSTS_NPTXFEMP)
2212 dwc2_np_tx_fifo_empty_intr(hsotg);
2213 if (gintsts & GINTSTS_PRTINT)
2214 dwc2_port_intr(hsotg);
2215 if (gintsts & GINTSTS_HCHINT)
2216 dwc2_hc_intr(hsotg);
2217 if (gintsts & GINTSTS_PTXFEMP)
2218 dwc2_perio_tx_fifo_empty_intr(hsotg);
2219
2220 if (dbg_gintsts) {
2221 dev_vdbg(hsotg->dev,
2222 "DWC OTG HCD Finished Servicing Interrupts\n");
2223 dev_vdbg(hsotg->dev,
2224 "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n",
2225 dwc2_readl(hsotg->regs + GINTSTS),
2226 dwc2_readl(hsotg->regs + GINTMSK));
2227 }
2228 }
2229
2230 spin_unlock(&hsotg->lock);
2231
2232 return retval;
2233}