Linux Audio

Check our new training course

Loading...
v3.1
  1/*
  2 * Copyright (C) ST-Ericsson SA 2010
  3 *
  4 * License terms: GNU General Public License (GPL) version 2
  5 * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
  6 *
  7 * RTC clock driver for the RTC part of the AB8500 Power management chip.
  8 * Based on RTC clock driver for the AB3100 Analog Baseband Chip by
  9 * Linus Walleij <linus.walleij@stericsson.com>
 10 */
 11
 12#include <linux/module.h>
 13#include <linux/kernel.h>
 14#include <linux/init.h>
 15#include <linux/platform_device.h>
 16#include <linux/rtc.h>
 17#include <linux/mfd/abx500.h>
 18#include <linux/mfd/ab8500.h>
 19#include <linux/delay.h>
 
 20
 21#define AB8500_RTC_SOFF_STAT_REG	0x00
 22#define AB8500_RTC_CC_CONF_REG		0x01
 23#define AB8500_RTC_READ_REQ_REG		0x02
 24#define AB8500_RTC_WATCH_TSECMID_REG	0x03
 25#define AB8500_RTC_WATCH_TSECHI_REG	0x04
 26#define AB8500_RTC_WATCH_TMIN_LOW_REG	0x05
 27#define AB8500_RTC_WATCH_TMIN_MID_REG	0x06
 28#define AB8500_RTC_WATCH_TMIN_HI_REG	0x07
 29#define AB8500_RTC_ALRM_MIN_LOW_REG	0x08
 30#define AB8500_RTC_ALRM_MIN_MID_REG	0x09
 31#define AB8500_RTC_ALRM_MIN_HI_REG	0x0A
 32#define AB8500_RTC_STAT_REG		0x0B
 33#define AB8500_RTC_BKUP_CHG_REG		0x0C
 34#define AB8500_RTC_FORCE_BKUP_REG	0x0D
 35#define AB8500_RTC_CALIB_REG		0x0E
 36#define AB8500_RTC_SWITCH_STAT_REG	0x0F
 37
 38/* RtcReadRequest bits */
 39#define RTC_READ_REQUEST		0x01
 40#define RTC_WRITE_REQUEST		0x02
 41
 42/* RtcCtrl bits */
 43#define RTC_ALARM_ENA			0x04
 44#define RTC_STATUS_DATA			0x01
 45
 46#define COUNTS_PER_SEC			(0xF000 / 60)
 47#define AB8500_RTC_EPOCH		2000
 48
 49static const u8 ab8500_rtc_time_regs[] = {
 50	AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
 51	AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
 52	AB8500_RTC_WATCH_TSECMID_REG
 53};
 54
 55static const u8 ab8500_rtc_alarm_regs[] = {
 56	AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
 57	AB8500_RTC_ALRM_MIN_LOW_REG
 58};
 59
 60/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
 61static unsigned long get_elapsed_seconds(int year)
 62{
 63	unsigned long secs;
 64	struct rtc_time tm = {
 65		.tm_year = year - 1900,
 66		.tm_mday = 1,
 67	};
 68
 69	/*
 70	 * This function calculates secs from 1970 and not from
 71	 * 1900, even if we supply the offset from year 1900.
 72	 */
 73	rtc_tm_to_time(&tm, &secs);
 74	return secs;
 75}
 76
 77static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
 78{
 79	unsigned long timeout = jiffies + HZ;
 80	int retval, i;
 81	unsigned long mins, secs;
 82	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
 83	u8 value;
 84
 85	/* Request a data read */
 86	retval = abx500_set_register_interruptible(dev,
 87		AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
 88	if (retval < 0)
 89		return retval;
 90
 91	/* Early AB8500 chips will not clear the rtc read request bit */
 92	if (abx500_get_chip_id(dev) == 0) {
 93		msleep(1);
 94	} else {
 95		/* Wait for some cycles after enabling the rtc read in ab8500 */
 96		while (time_before(jiffies, timeout)) {
 97			retval = abx500_get_register_interruptible(dev,
 98				AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
 99			if (retval < 0)
100				return retval;
101
102			if (!(value & RTC_READ_REQUEST))
103				break;
104
105			msleep(1);
106		}
107	}
108
109	/* Read the Watchtime registers */
110	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
111		retval = abx500_get_register_interruptible(dev,
112			AB8500_RTC, ab8500_rtc_time_regs[i], &value);
113		if (retval < 0)
114			return retval;
115		buf[i] = value;
116	}
117
118	mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
119
120	secs =	(buf[3] << 8) | buf[4];
121	secs =	secs / COUNTS_PER_SEC;
122	secs =	secs + (mins * 60);
123
124	/* Add back the initially subtracted number of seconds */
125	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
126
127	rtc_time_to_tm(secs, tm);
128	return rtc_valid_tm(tm);
129}
130
131static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
132{
133	int retval, i;
134	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
135	unsigned long no_secs, no_mins, secs = 0;
136
137	if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) {
138		dev_dbg(dev, "year should be equal to or greater than %d\n",
139				AB8500_RTC_EPOCH);
140		return -EINVAL;
141	}
142
143	/* Get the number of seconds since 1970 */
144	rtc_tm_to_time(tm, &secs);
145
146	/*
147	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
148	 * we only have a small counter in the RTC.
149	 */
150	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
151
152	no_mins = secs / 60;
153
154	no_secs = secs % 60;
155	/* Make the seconds count as per the RTC resolution */
156	no_secs = no_secs * COUNTS_PER_SEC;
157
158	buf[4] = no_secs & 0xFF;
159	buf[3] = (no_secs >> 8) & 0xFF;
160
161	buf[2] = no_mins & 0xFF;
162	buf[1] = (no_mins >> 8) & 0xFF;
163	buf[0] = (no_mins >> 16) & 0xFF;
164
165	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
166		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
167			ab8500_rtc_time_regs[i], buf[i]);
168		if (retval < 0)
169			return retval;
170	}
171
172	/* Request a data write */
173	return abx500_set_register_interruptible(dev, AB8500_RTC,
174		AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
175}
176
177static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
178{
179	int retval, i;
180	u8 rtc_ctrl, value;
181	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
182	unsigned long secs, mins;
183
184	/* Check if the alarm is enabled or not */
185	retval = abx500_get_register_interruptible(dev, AB8500_RTC,
186		AB8500_RTC_STAT_REG, &rtc_ctrl);
187	if (retval < 0)
188		return retval;
189
190	if (rtc_ctrl & RTC_ALARM_ENA)
191		alarm->enabled = 1;
192	else
193		alarm->enabled = 0;
194
195	alarm->pending = 0;
196
197	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
198		retval = abx500_get_register_interruptible(dev, AB8500_RTC,
199			ab8500_rtc_alarm_regs[i], &value);
200		if (retval < 0)
201			return retval;
202		buf[i] = value;
203	}
204
205	mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
206	secs = mins * 60;
207
208	/* Add back the initially subtracted number of seconds */
209	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
210
211	rtc_time_to_tm(secs, &alarm->time);
212
213	return rtc_valid_tm(&alarm->time);
214}
215
216static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
217{
218	return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
219		AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
220		enabled ? RTC_ALARM_ENA : 0);
221}
222
223static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
224{
225	int retval, i;
226	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
227	unsigned long mins, secs = 0;
228
229	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
230		dev_dbg(dev, "year should be equal to or greater than %d\n",
231				AB8500_RTC_EPOCH);
232		return -EINVAL;
233	}
234
235	/* Get the number of seconds since 1970 */
236	rtc_tm_to_time(&alarm->time, &secs);
237
238	/*
239	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
240	 * we only have a small counter in the RTC.
241	 */
242	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
243
244	mins = secs / 60;
245
246	buf[2] = mins & 0xFF;
247	buf[1] = (mins >> 8) & 0xFF;
248	buf[0] = (mins >> 16) & 0xFF;
249
250	/* Set the alarm time */
251	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
252		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
253			ab8500_rtc_alarm_regs[i], buf[i]);
254		if (retval < 0)
255			return retval;
256	}
257
258	return ab8500_rtc_irq_enable(dev, alarm->enabled);
259}
260
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
261static irqreturn_t rtc_alarm_handler(int irq, void *data)
262{
263	struct rtc_device *rtc = data;
264	unsigned long events = RTC_IRQF | RTC_AF;
265
266	dev_dbg(&rtc->dev, "%s\n", __func__);
267	rtc_update_irq(rtc, 1, events);
268
269	return IRQ_HANDLED;
270}
271
272static const struct rtc_class_ops ab8500_rtc_ops = {
273	.read_time		= ab8500_rtc_read_time,
274	.set_time		= ab8500_rtc_set_time,
275	.read_alarm		= ab8500_rtc_read_alarm,
276	.set_alarm		= ab8500_rtc_set_alarm,
277	.alarm_irq_enable	= ab8500_rtc_irq_enable,
278};
279
280static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
281{
282	int err;
283	struct rtc_device *rtc;
284	u8 rtc_ctrl;
285	int irq;
286
287	irq = platform_get_irq_byname(pdev, "ALARM");
288	if (irq < 0)
289		return irq;
290
291	/* For RTC supply test */
292	err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
293		AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
294	if (err < 0)
295		return err;
296
297	/* Wait for reset by the PorRtc */
298	msleep(1);
299
300	err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
301		AB8500_RTC_STAT_REG, &rtc_ctrl);
302	if (err < 0)
303		return err;
304
305	/* Check if the RTC Supply fails */
306	if (!(rtc_ctrl & RTC_STATUS_DATA)) {
307		dev_err(&pdev->dev, "RTC supply failure\n");
308		return -ENODEV;
309	}
310
 
 
311	rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops,
312			THIS_MODULE);
313	if (IS_ERR(rtc)) {
314		dev_err(&pdev->dev, "Registration failed\n");
315		err = PTR_ERR(rtc);
316		return err;
317	}
318
319	err = request_threaded_irq(irq, NULL, rtc_alarm_handler, 0,
320				   "ab8500-rtc", rtc);
321	if (err < 0) {
322		rtc_device_unregister(rtc);
323		return err;
324	}
325
326	platform_set_drvdata(pdev, rtc);
327
 
 
 
 
 
 
328	return 0;
329}
330
331static int __devexit ab8500_rtc_remove(struct platform_device *pdev)
332{
333	struct rtc_device *rtc = platform_get_drvdata(pdev);
334	int irq = platform_get_irq_byname(pdev, "ALARM");
335
 
 
336	free_irq(irq, rtc);
337	rtc_device_unregister(rtc);
338	platform_set_drvdata(pdev, NULL);
339
340	return 0;
341}
342
 
 
 
 
 
343static struct platform_driver ab8500_rtc_driver = {
344	.driver = {
345		.name = "ab8500-rtc",
346		.owner = THIS_MODULE,
 
347	},
348	.probe	= ab8500_rtc_probe,
349	.remove = __devexit_p(ab8500_rtc_remove),
350};
351
352static int __init ab8500_rtc_init(void)
353{
354	return platform_driver_register(&ab8500_rtc_driver);
355}
356
357static void __exit ab8500_rtc_exit(void)
358{
359	platform_driver_unregister(&ab8500_rtc_driver);
360}
361
362module_init(ab8500_rtc_init);
363module_exit(ab8500_rtc_exit);
364MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
365MODULE_DESCRIPTION("AB8500 RTC Driver");
366MODULE_LICENSE("GPL v2");
v3.5.6
  1/*
  2 * Copyright (C) ST-Ericsson SA 2010
  3 *
  4 * License terms: GNU General Public License (GPL) version 2
  5 * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
  6 *
  7 * RTC clock driver for the RTC part of the AB8500 Power management chip.
  8 * Based on RTC clock driver for the AB3100 Analog Baseband Chip by
  9 * Linus Walleij <linus.walleij@stericsson.com>
 10 */
 11
 12#include <linux/module.h>
 13#include <linux/kernel.h>
 14#include <linux/init.h>
 15#include <linux/platform_device.h>
 16#include <linux/rtc.h>
 17#include <linux/mfd/abx500.h>
 18#include <linux/mfd/abx500/ab8500.h>
 19#include <linux/delay.h>
 20#include <linux/of.h>
 21
 22#define AB8500_RTC_SOFF_STAT_REG	0x00
 23#define AB8500_RTC_CC_CONF_REG		0x01
 24#define AB8500_RTC_READ_REQ_REG		0x02
 25#define AB8500_RTC_WATCH_TSECMID_REG	0x03
 26#define AB8500_RTC_WATCH_TSECHI_REG	0x04
 27#define AB8500_RTC_WATCH_TMIN_LOW_REG	0x05
 28#define AB8500_RTC_WATCH_TMIN_MID_REG	0x06
 29#define AB8500_RTC_WATCH_TMIN_HI_REG	0x07
 30#define AB8500_RTC_ALRM_MIN_LOW_REG	0x08
 31#define AB8500_RTC_ALRM_MIN_MID_REG	0x09
 32#define AB8500_RTC_ALRM_MIN_HI_REG	0x0A
 33#define AB8500_RTC_STAT_REG		0x0B
 34#define AB8500_RTC_BKUP_CHG_REG		0x0C
 35#define AB8500_RTC_FORCE_BKUP_REG	0x0D
 36#define AB8500_RTC_CALIB_REG		0x0E
 37#define AB8500_RTC_SWITCH_STAT_REG	0x0F
 38
 39/* RtcReadRequest bits */
 40#define RTC_READ_REQUEST		0x01
 41#define RTC_WRITE_REQUEST		0x02
 42
 43/* RtcCtrl bits */
 44#define RTC_ALARM_ENA			0x04
 45#define RTC_STATUS_DATA			0x01
 46
 47#define COUNTS_PER_SEC			(0xF000 / 60)
 48#define AB8500_RTC_EPOCH		2000
 49
 50static const u8 ab8500_rtc_time_regs[] = {
 51	AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
 52	AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
 53	AB8500_RTC_WATCH_TSECMID_REG
 54};
 55
 56static const u8 ab8500_rtc_alarm_regs[] = {
 57	AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
 58	AB8500_RTC_ALRM_MIN_LOW_REG
 59};
 60
 61/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
 62static unsigned long get_elapsed_seconds(int year)
 63{
 64	unsigned long secs;
 65	struct rtc_time tm = {
 66		.tm_year = year - 1900,
 67		.tm_mday = 1,
 68	};
 69
 70	/*
 71	 * This function calculates secs from 1970 and not from
 72	 * 1900, even if we supply the offset from year 1900.
 73	 */
 74	rtc_tm_to_time(&tm, &secs);
 75	return secs;
 76}
 77
 78static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
 79{
 80	unsigned long timeout = jiffies + HZ;
 81	int retval, i;
 82	unsigned long mins, secs;
 83	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
 84	u8 value;
 85
 86	/* Request a data read */
 87	retval = abx500_set_register_interruptible(dev,
 88		AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
 89	if (retval < 0)
 90		return retval;
 91
 92	/* Early AB8500 chips will not clear the rtc read request bit */
 93	if (abx500_get_chip_id(dev) == 0) {
 94		usleep_range(1000, 1000);
 95	} else {
 96		/* Wait for some cycles after enabling the rtc read in ab8500 */
 97		while (time_before(jiffies, timeout)) {
 98			retval = abx500_get_register_interruptible(dev,
 99				AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
100			if (retval < 0)
101				return retval;
102
103			if (!(value & RTC_READ_REQUEST))
104				break;
105
106			usleep_range(1000, 5000);
107		}
108	}
109
110	/* Read the Watchtime registers */
111	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
112		retval = abx500_get_register_interruptible(dev,
113			AB8500_RTC, ab8500_rtc_time_regs[i], &value);
114		if (retval < 0)
115			return retval;
116		buf[i] = value;
117	}
118
119	mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
120
121	secs =	(buf[3] << 8) | buf[4];
122	secs =	secs / COUNTS_PER_SEC;
123	secs =	secs + (mins * 60);
124
125	/* Add back the initially subtracted number of seconds */
126	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
127
128	rtc_time_to_tm(secs, tm);
129	return rtc_valid_tm(tm);
130}
131
132static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
133{
134	int retval, i;
135	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
136	unsigned long no_secs, no_mins, secs = 0;
137
138	if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) {
139		dev_dbg(dev, "year should be equal to or greater than %d\n",
140				AB8500_RTC_EPOCH);
141		return -EINVAL;
142	}
143
144	/* Get the number of seconds since 1970 */
145	rtc_tm_to_time(tm, &secs);
146
147	/*
148	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
149	 * we only have a small counter in the RTC.
150	 */
151	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
152
153	no_mins = secs / 60;
154
155	no_secs = secs % 60;
156	/* Make the seconds count as per the RTC resolution */
157	no_secs = no_secs * COUNTS_PER_SEC;
158
159	buf[4] = no_secs & 0xFF;
160	buf[3] = (no_secs >> 8) & 0xFF;
161
162	buf[2] = no_mins & 0xFF;
163	buf[1] = (no_mins >> 8) & 0xFF;
164	buf[0] = (no_mins >> 16) & 0xFF;
165
166	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
167		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
168			ab8500_rtc_time_regs[i], buf[i]);
169		if (retval < 0)
170			return retval;
171	}
172
173	/* Request a data write */
174	return abx500_set_register_interruptible(dev, AB8500_RTC,
175		AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
176}
177
178static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
179{
180	int retval, i;
181	u8 rtc_ctrl, value;
182	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
183	unsigned long secs, mins;
184
185	/* Check if the alarm is enabled or not */
186	retval = abx500_get_register_interruptible(dev, AB8500_RTC,
187		AB8500_RTC_STAT_REG, &rtc_ctrl);
188	if (retval < 0)
189		return retval;
190
191	if (rtc_ctrl & RTC_ALARM_ENA)
192		alarm->enabled = 1;
193	else
194		alarm->enabled = 0;
195
196	alarm->pending = 0;
197
198	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
199		retval = abx500_get_register_interruptible(dev, AB8500_RTC,
200			ab8500_rtc_alarm_regs[i], &value);
201		if (retval < 0)
202			return retval;
203		buf[i] = value;
204	}
205
206	mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
207	secs = mins * 60;
208
209	/* Add back the initially subtracted number of seconds */
210	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
211
212	rtc_time_to_tm(secs, &alarm->time);
213
214	return rtc_valid_tm(&alarm->time);
215}
216
217static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
218{
219	return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
220		AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
221		enabled ? RTC_ALARM_ENA : 0);
222}
223
224static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
225{
226	int retval, i;
227	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
228	unsigned long mins, secs = 0;
229
230	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
231		dev_dbg(dev, "year should be equal to or greater than %d\n",
232				AB8500_RTC_EPOCH);
233		return -EINVAL;
234	}
235
236	/* Get the number of seconds since 1970 */
237	rtc_tm_to_time(&alarm->time, &secs);
238
239	/*
240	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
241	 * we only have a small counter in the RTC.
242	 */
243	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
244
245	mins = secs / 60;
246
247	buf[2] = mins & 0xFF;
248	buf[1] = (mins >> 8) & 0xFF;
249	buf[0] = (mins >> 16) & 0xFF;
250
251	/* Set the alarm time */
252	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
253		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
254			ab8500_rtc_alarm_regs[i], buf[i]);
255		if (retval < 0)
256			return retval;
257	}
258
259	return ab8500_rtc_irq_enable(dev, alarm->enabled);
260}
261
262
263static int ab8500_rtc_set_calibration(struct device *dev, int calibration)
264{
265	int retval;
266	u8  rtccal = 0;
267
268	/*
269	 * Check that the calibration value (which is in units of 0.5
270	 * parts-per-million) is in the AB8500's range for RtcCalibration
271	 * register. -128 (0x80) is not permitted because the AB8500 uses
272	 * a sign-bit rather than two's complement, so 0x80 is just another
273	 * representation of zero.
274	 */
275	if ((calibration < -127) || (calibration > 127)) {
276		dev_err(dev, "RtcCalibration value outside permitted range\n");
277		return -EINVAL;
278	}
279
280	/*
281	 * The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
282	 * so need to convert to this sort of representation before writing
283	 * into RtcCalibration register...
284	 */
285	if (calibration >= 0)
286		rtccal = 0x7F & calibration;
287	else
288		rtccal = ~(calibration - 1) | 0x80;
289
290	retval = abx500_set_register_interruptible(dev, AB8500_RTC,
291			AB8500_RTC_CALIB_REG, rtccal);
292
293	return retval;
294}
295
296static int ab8500_rtc_get_calibration(struct device *dev, int *calibration)
297{
298	int retval;
299	u8  rtccal = 0;
300
301	retval =  abx500_get_register_interruptible(dev, AB8500_RTC,
302			AB8500_RTC_CALIB_REG, &rtccal);
303	if (retval >= 0) {
304		/*
305		 * The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
306		 * so need to convert value from RtcCalibration register into
307		 * a two's complement signed value...
308		 */
309		if (rtccal & 0x80)
310			*calibration = 0 - (rtccal & 0x7F);
311		else
312			*calibration = 0x7F & rtccal;
313	}
314
315	return retval;
316}
317
318static ssize_t ab8500_sysfs_store_rtc_calibration(struct device *dev,
319				struct device_attribute *attr,
320				const char *buf, size_t count)
321{
322	int retval;
323	int calibration = 0;
324
325	if (sscanf(buf, " %i ", &calibration) != 1) {
326		dev_err(dev, "Failed to store RTC calibration attribute\n");
327		return -EINVAL;
328	}
329
330	retval = ab8500_rtc_set_calibration(dev, calibration);
331
332	return retval ? retval : count;
333}
334
335static ssize_t ab8500_sysfs_show_rtc_calibration(struct device *dev,
336				struct device_attribute *attr, char *buf)
337{
338	int  retval = 0;
339	int  calibration = 0;
340
341	retval = ab8500_rtc_get_calibration(dev, &calibration);
342	if (retval < 0) {
343		dev_err(dev, "Failed to read RTC calibration attribute\n");
344		sprintf(buf, "0\n");
345		return retval;
346	}
347
348	return sprintf(buf, "%d\n", calibration);
349}
350
351static DEVICE_ATTR(rtc_calibration, S_IRUGO | S_IWUSR,
352		   ab8500_sysfs_show_rtc_calibration,
353		   ab8500_sysfs_store_rtc_calibration);
354
355static int ab8500_sysfs_rtc_register(struct device *dev)
356{
357	return device_create_file(dev, &dev_attr_rtc_calibration);
358}
359
360static void ab8500_sysfs_rtc_unregister(struct device *dev)
361{
362	device_remove_file(dev, &dev_attr_rtc_calibration);
363}
364
365static irqreturn_t rtc_alarm_handler(int irq, void *data)
366{
367	struct rtc_device *rtc = data;
368	unsigned long events = RTC_IRQF | RTC_AF;
369
370	dev_dbg(&rtc->dev, "%s\n", __func__);
371	rtc_update_irq(rtc, 1, events);
372
373	return IRQ_HANDLED;
374}
375
376static const struct rtc_class_ops ab8500_rtc_ops = {
377	.read_time		= ab8500_rtc_read_time,
378	.set_time		= ab8500_rtc_set_time,
379	.read_alarm		= ab8500_rtc_read_alarm,
380	.set_alarm		= ab8500_rtc_set_alarm,
381	.alarm_irq_enable	= ab8500_rtc_irq_enable,
382};
383
384static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
385{
386	int err;
387	struct rtc_device *rtc;
388	u8 rtc_ctrl;
389	int irq;
390
391	irq = platform_get_irq_byname(pdev, "ALARM");
392	if (irq < 0)
393		return irq;
394
395	/* For RTC supply test */
396	err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
397		AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
398	if (err < 0)
399		return err;
400
401	/* Wait for reset by the PorRtc */
402	usleep_range(1000, 5000);
403
404	err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
405		AB8500_RTC_STAT_REG, &rtc_ctrl);
406	if (err < 0)
407		return err;
408
409	/* Check if the RTC Supply fails */
410	if (!(rtc_ctrl & RTC_STATUS_DATA)) {
411		dev_err(&pdev->dev, "RTC supply failure\n");
412		return -ENODEV;
413	}
414
415	device_init_wakeup(&pdev->dev, true);
416
417	rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops,
418			THIS_MODULE);
419	if (IS_ERR(rtc)) {
420		dev_err(&pdev->dev, "Registration failed\n");
421		err = PTR_ERR(rtc);
422		return err;
423	}
424
425	err = request_threaded_irq(irq, NULL, rtc_alarm_handler,
426		IRQF_NO_SUSPEND | IRQF_ONESHOT, "ab8500-rtc", rtc);
427	if (err < 0) {
428		rtc_device_unregister(rtc);
429		return err;
430	}
431
432	platform_set_drvdata(pdev, rtc);
433
434	err = ab8500_sysfs_rtc_register(&pdev->dev);
435	if (err) {
436		dev_err(&pdev->dev, "sysfs RTC failed to register\n");
437		return err;
438	}
439
440	return 0;
441}
442
443static int __devexit ab8500_rtc_remove(struct platform_device *pdev)
444{
445	struct rtc_device *rtc = platform_get_drvdata(pdev);
446	int irq = platform_get_irq_byname(pdev, "ALARM");
447
448	ab8500_sysfs_rtc_unregister(&pdev->dev);
449
450	free_irq(irq, rtc);
451	rtc_device_unregister(rtc);
452	platform_set_drvdata(pdev, NULL);
453
454	return 0;
455}
456
457static const struct of_device_id ab8500_rtc_match[] = {
458	{ .compatible = "stericsson,ab8500-rtc", },
459	{}
460};
461
462static struct platform_driver ab8500_rtc_driver = {
463	.driver = {
464		.name = "ab8500-rtc",
465		.owner = THIS_MODULE,
466		.of_match_table = ab8500_rtc_match,
467	},
468	.probe	= ab8500_rtc_probe,
469	.remove = __devexit_p(ab8500_rtc_remove),
470};
471
472module_platform_driver(ab8500_rtc_driver);
 
 
 
 
 
 
 
 
473
 
 
474MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
475MODULE_DESCRIPTION("AB8500 RTC Driver");
476MODULE_LICENSE("GPL v2");