Linux Audio

Check our new training course

Loading...
v3.1
  1/*
  2 * Copyright (C) ST-Ericsson SA 2010
  3 *
  4 * License terms: GNU General Public License (GPL) version 2
  5 * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
  6 *
  7 * RTC clock driver for the RTC part of the AB8500 Power management chip.
  8 * Based on RTC clock driver for the AB3100 Analog Baseband Chip by
  9 * Linus Walleij <linus.walleij@stericsson.com>
 10 */
 11
 12#include <linux/module.h>
 13#include <linux/kernel.h>
 14#include <linux/init.h>
 15#include <linux/platform_device.h>
 16#include <linux/rtc.h>
 17#include <linux/mfd/abx500.h>
 18#include <linux/mfd/ab8500.h>
 19#include <linux/delay.h>
 
 
 20
 21#define AB8500_RTC_SOFF_STAT_REG	0x00
 22#define AB8500_RTC_CC_CONF_REG		0x01
 23#define AB8500_RTC_READ_REQ_REG		0x02
 24#define AB8500_RTC_WATCH_TSECMID_REG	0x03
 25#define AB8500_RTC_WATCH_TSECHI_REG	0x04
 26#define AB8500_RTC_WATCH_TMIN_LOW_REG	0x05
 27#define AB8500_RTC_WATCH_TMIN_MID_REG	0x06
 28#define AB8500_RTC_WATCH_TMIN_HI_REG	0x07
 29#define AB8500_RTC_ALRM_MIN_LOW_REG	0x08
 30#define AB8500_RTC_ALRM_MIN_MID_REG	0x09
 31#define AB8500_RTC_ALRM_MIN_HI_REG	0x0A
 32#define AB8500_RTC_STAT_REG		0x0B
 33#define AB8500_RTC_BKUP_CHG_REG		0x0C
 34#define AB8500_RTC_FORCE_BKUP_REG	0x0D
 35#define AB8500_RTC_CALIB_REG		0x0E
 36#define AB8500_RTC_SWITCH_STAT_REG	0x0F
 
 
 
 
 37
 38/* RtcReadRequest bits */
 39#define RTC_READ_REQUEST		0x01
 40#define RTC_WRITE_REQUEST		0x02
 41
 42/* RtcCtrl bits */
 43#define RTC_ALARM_ENA			0x04
 44#define RTC_STATUS_DATA			0x01
 45
 46#define COUNTS_PER_SEC			(0xF000 / 60)
 47#define AB8500_RTC_EPOCH		2000
 48
 49static const u8 ab8500_rtc_time_regs[] = {
 50	AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
 51	AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
 52	AB8500_RTC_WATCH_TSECMID_REG
 53};
 54
 55static const u8 ab8500_rtc_alarm_regs[] = {
 56	AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
 57	AB8500_RTC_ALRM_MIN_LOW_REG
 58};
 59
 
 
 
 
 
 60/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
 61static unsigned long get_elapsed_seconds(int year)
 62{
 63	unsigned long secs;
 64	struct rtc_time tm = {
 65		.tm_year = year - 1900,
 66		.tm_mday = 1,
 67	};
 68
 69	/*
 70	 * This function calculates secs from 1970 and not from
 71	 * 1900, even if we supply the offset from year 1900.
 72	 */
 73	rtc_tm_to_time(&tm, &secs);
 74	return secs;
 75}
 76
 77static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
 78{
 79	unsigned long timeout = jiffies + HZ;
 80	int retval, i;
 81	unsigned long mins, secs;
 82	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
 83	u8 value;
 84
 85	/* Request a data read */
 86	retval = abx500_set_register_interruptible(dev,
 87		AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
 88	if (retval < 0)
 89		return retval;
 90
 91	/* Early AB8500 chips will not clear the rtc read request bit */
 92	if (abx500_get_chip_id(dev) == 0) {
 93		msleep(1);
 94	} else {
 95		/* Wait for some cycles after enabling the rtc read in ab8500 */
 96		while (time_before(jiffies, timeout)) {
 97			retval = abx500_get_register_interruptible(dev,
 98				AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
 99			if (retval < 0)
100				return retval;
101
102			if (!(value & RTC_READ_REQUEST))
103				break;
104
105			msleep(1);
106		}
107	}
108
109	/* Read the Watchtime registers */
110	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
111		retval = abx500_get_register_interruptible(dev,
112			AB8500_RTC, ab8500_rtc_time_regs[i], &value);
113		if (retval < 0)
114			return retval;
115		buf[i] = value;
116	}
117
118	mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
119
120	secs =	(buf[3] << 8) | buf[4];
121	secs =	secs / COUNTS_PER_SEC;
122	secs =	secs + (mins * 60);
123
124	/* Add back the initially subtracted number of seconds */
125	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
126
127	rtc_time_to_tm(secs, tm);
128	return rtc_valid_tm(tm);
129}
130
131static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
132{
133	int retval, i;
134	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
135	unsigned long no_secs, no_mins, secs = 0;
136
137	if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) {
138		dev_dbg(dev, "year should be equal to or greater than %d\n",
139				AB8500_RTC_EPOCH);
140		return -EINVAL;
141	}
142
143	/* Get the number of seconds since 1970 */
144	rtc_tm_to_time(tm, &secs);
145
146	/*
147	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
148	 * we only have a small counter in the RTC.
149	 */
150	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
151
152	no_mins = secs / 60;
153
154	no_secs = secs % 60;
155	/* Make the seconds count as per the RTC resolution */
156	no_secs = no_secs * COUNTS_PER_SEC;
157
158	buf[4] = no_secs & 0xFF;
159	buf[3] = (no_secs >> 8) & 0xFF;
160
161	buf[2] = no_mins & 0xFF;
162	buf[1] = (no_mins >> 8) & 0xFF;
163	buf[0] = (no_mins >> 16) & 0xFF;
164
165	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
166		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
167			ab8500_rtc_time_regs[i], buf[i]);
168		if (retval < 0)
169			return retval;
170	}
171
172	/* Request a data write */
173	return abx500_set_register_interruptible(dev, AB8500_RTC,
174		AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
175}
176
177static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
178{
179	int retval, i;
180	u8 rtc_ctrl, value;
181	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
182	unsigned long secs, mins;
183
184	/* Check if the alarm is enabled or not */
185	retval = abx500_get_register_interruptible(dev, AB8500_RTC,
186		AB8500_RTC_STAT_REG, &rtc_ctrl);
187	if (retval < 0)
188		return retval;
189
190	if (rtc_ctrl & RTC_ALARM_ENA)
191		alarm->enabled = 1;
192	else
193		alarm->enabled = 0;
194
195	alarm->pending = 0;
196
197	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
198		retval = abx500_get_register_interruptible(dev, AB8500_RTC,
199			ab8500_rtc_alarm_regs[i], &value);
200		if (retval < 0)
201			return retval;
202		buf[i] = value;
203	}
204
205	mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
206	secs = mins * 60;
207
208	/* Add back the initially subtracted number of seconds */
209	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
210
211	rtc_time_to_tm(secs, &alarm->time);
212
213	return rtc_valid_tm(&alarm->time);
214}
215
216static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
217{
218	return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
219		AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
220		enabled ? RTC_ALARM_ENA : 0);
221}
222
223static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
224{
225	int retval, i;
226	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
227	unsigned long mins, secs = 0;
 
228
229	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
230		dev_dbg(dev, "year should be equal to or greater than %d\n",
231				AB8500_RTC_EPOCH);
232		return -EINVAL;
233	}
234
235	/* Get the number of seconds since 1970 */
236	rtc_tm_to_time(&alarm->time, &secs);
237
238	/*
 
 
 
 
 
 
 
 
 
 
 
 
239	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
240	 * we only have a small counter in the RTC.
241	 */
242	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
243
244	mins = secs / 60;
245
246	buf[2] = mins & 0xFF;
247	buf[1] = (mins >> 8) & 0xFF;
248	buf[0] = (mins >> 16) & 0xFF;
249
250	/* Set the alarm time */
251	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
252		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
253			ab8500_rtc_alarm_regs[i], buf[i]);
254		if (retval < 0)
255			return retval;
256	}
257
258	return ab8500_rtc_irq_enable(dev, alarm->enabled);
259}
260
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
261static irqreturn_t rtc_alarm_handler(int irq, void *data)
262{
263	struct rtc_device *rtc = data;
264	unsigned long events = RTC_IRQF | RTC_AF;
265
266	dev_dbg(&rtc->dev, "%s\n", __func__);
267	rtc_update_irq(rtc, 1, events);
268
269	return IRQ_HANDLED;
270}
271
272static const struct rtc_class_ops ab8500_rtc_ops = {
273	.read_time		= ab8500_rtc_read_time,
274	.set_time		= ab8500_rtc_set_time,
275	.read_alarm		= ab8500_rtc_read_alarm,
276	.set_alarm		= ab8500_rtc_set_alarm,
277	.alarm_irq_enable	= ab8500_rtc_irq_enable,
278};
279
280static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
281{
 
282	int err;
283	struct rtc_device *rtc;
284	u8 rtc_ctrl;
285	int irq;
286
287	irq = platform_get_irq_byname(pdev, "ALARM");
288	if (irq < 0)
289		return irq;
290
291	/* For RTC supply test */
292	err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
293		AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
294	if (err < 0)
295		return err;
296
297	/* Wait for reset by the PorRtc */
298	msleep(1);
299
300	err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
301		AB8500_RTC_STAT_REG, &rtc_ctrl);
302	if (err < 0)
303		return err;
304
305	/* Check if the RTC Supply fails */
306	if (!(rtc_ctrl & RTC_STATUS_DATA)) {
307		dev_err(&pdev->dev, "RTC supply failure\n");
308		return -ENODEV;
309	}
310
311	rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops,
312			THIS_MODULE);
 
 
 
313	if (IS_ERR(rtc)) {
314		dev_err(&pdev->dev, "Registration failed\n");
315		err = PTR_ERR(rtc);
316		return err;
317	}
318
319	err = request_threaded_irq(irq, NULL, rtc_alarm_handler, 0,
320				   "ab8500-rtc", rtc);
321	if (err < 0) {
322		rtc_device_unregister(rtc);
323		return err;
324	}
325
 
326	platform_set_drvdata(pdev, rtc);
327
 
 
 
 
 
 
 
 
328	return 0;
329}
330
331static int __devexit ab8500_rtc_remove(struct platform_device *pdev)
332{
333	struct rtc_device *rtc = platform_get_drvdata(pdev);
334	int irq = platform_get_irq_byname(pdev, "ALARM");
335
336	free_irq(irq, rtc);
337	rtc_device_unregister(rtc);
338	platform_set_drvdata(pdev, NULL);
339
340	return 0;
341}
342
343static struct platform_driver ab8500_rtc_driver = {
344	.driver = {
345		.name = "ab8500-rtc",
346		.owner = THIS_MODULE,
347	},
348	.probe	= ab8500_rtc_probe,
349	.remove = __devexit_p(ab8500_rtc_remove),
 
350};
351
352static int __init ab8500_rtc_init(void)
353{
354	return platform_driver_register(&ab8500_rtc_driver);
355}
356
357static void __exit ab8500_rtc_exit(void)
358{
359	platform_driver_unregister(&ab8500_rtc_driver);
360}
361
362module_init(ab8500_rtc_init);
363module_exit(ab8500_rtc_exit);
364MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
365MODULE_DESCRIPTION("AB8500 RTC Driver");
366MODULE_LICENSE("GPL v2");
v4.6
  1/*
  2 * Copyright (C) ST-Ericsson SA 2010
  3 *
  4 * License terms: GNU General Public License (GPL) version 2
  5 * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
  6 *
  7 * RTC clock driver for the RTC part of the AB8500 Power management chip.
  8 * Based on RTC clock driver for the AB3100 Analog Baseband Chip by
  9 * Linus Walleij <linus.walleij@stericsson.com>
 10 */
 11
 12#include <linux/module.h>
 13#include <linux/kernel.h>
 14#include <linux/init.h>
 15#include <linux/platform_device.h>
 16#include <linux/rtc.h>
 17#include <linux/mfd/abx500.h>
 18#include <linux/mfd/abx500/ab8500.h>
 19#include <linux/delay.h>
 20#include <linux/of.h>
 21#include <linux/pm_wakeirq.h>
 22
 23#define AB8500_RTC_SOFF_STAT_REG	0x00
 24#define AB8500_RTC_CC_CONF_REG		0x01
 25#define AB8500_RTC_READ_REQ_REG		0x02
 26#define AB8500_RTC_WATCH_TSECMID_REG	0x03
 27#define AB8500_RTC_WATCH_TSECHI_REG	0x04
 28#define AB8500_RTC_WATCH_TMIN_LOW_REG	0x05
 29#define AB8500_RTC_WATCH_TMIN_MID_REG	0x06
 30#define AB8500_RTC_WATCH_TMIN_HI_REG	0x07
 31#define AB8500_RTC_ALRM_MIN_LOW_REG	0x08
 32#define AB8500_RTC_ALRM_MIN_MID_REG	0x09
 33#define AB8500_RTC_ALRM_MIN_HI_REG	0x0A
 34#define AB8500_RTC_STAT_REG		0x0B
 35#define AB8500_RTC_BKUP_CHG_REG		0x0C
 36#define AB8500_RTC_FORCE_BKUP_REG	0x0D
 37#define AB8500_RTC_CALIB_REG		0x0E
 38#define AB8500_RTC_SWITCH_STAT_REG	0x0F
 39#define AB8540_RTC_ALRM_SEC		0x22
 40#define AB8540_RTC_ALRM_MIN_LOW_REG	0x23
 41#define AB8540_RTC_ALRM_MIN_MID_REG	0x24
 42#define AB8540_RTC_ALRM_MIN_HI_REG	0x25
 43
 44/* RtcReadRequest bits */
 45#define RTC_READ_REQUEST		0x01
 46#define RTC_WRITE_REQUEST		0x02
 47
 48/* RtcCtrl bits */
 49#define RTC_ALARM_ENA			0x04
 50#define RTC_STATUS_DATA			0x01
 51
 52#define COUNTS_PER_SEC			(0xF000 / 60)
 53#define AB8500_RTC_EPOCH		2000
 54
 55static const u8 ab8500_rtc_time_regs[] = {
 56	AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
 57	AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
 58	AB8500_RTC_WATCH_TSECMID_REG
 59};
 60
 61static const u8 ab8500_rtc_alarm_regs[] = {
 62	AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
 63	AB8500_RTC_ALRM_MIN_LOW_REG
 64};
 65
 66static const u8 ab8540_rtc_alarm_regs[] = {
 67	AB8540_RTC_ALRM_MIN_HI_REG, AB8540_RTC_ALRM_MIN_MID_REG,
 68	AB8540_RTC_ALRM_MIN_LOW_REG, AB8540_RTC_ALRM_SEC
 69};
 70
 71/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
 72static unsigned long get_elapsed_seconds(int year)
 73{
 74	unsigned long secs;
 75	struct rtc_time tm = {
 76		.tm_year = year - 1900,
 77		.tm_mday = 1,
 78	};
 79
 80	/*
 81	 * This function calculates secs from 1970 and not from
 82	 * 1900, even if we supply the offset from year 1900.
 83	 */
 84	rtc_tm_to_time(&tm, &secs);
 85	return secs;
 86}
 87
 88static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
 89{
 90	unsigned long timeout = jiffies + HZ;
 91	int retval, i;
 92	unsigned long mins, secs;
 93	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
 94	u8 value;
 95
 96	/* Request a data read */
 97	retval = abx500_set_register_interruptible(dev,
 98		AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
 99	if (retval < 0)
100		return retval;
101
102	/* Wait for some cycles after enabling the rtc read in ab8500 */
103	while (time_before(jiffies, timeout)) {
104		retval = abx500_get_register_interruptible(dev,
105			AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
106		if (retval < 0)
107			return retval;
 
 
 
 
108
109		if (!(value & RTC_READ_REQUEST))
110			break;
111
112		usleep_range(1000, 5000);
 
113	}
114
115	/* Read the Watchtime registers */
116	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
117		retval = abx500_get_register_interruptible(dev,
118			AB8500_RTC, ab8500_rtc_time_regs[i], &value);
119		if (retval < 0)
120			return retval;
121		buf[i] = value;
122	}
123
124	mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
125
126	secs =	(buf[3] << 8) | buf[4];
127	secs =	secs / COUNTS_PER_SEC;
128	secs =	secs + (mins * 60);
129
130	/* Add back the initially subtracted number of seconds */
131	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
132
133	rtc_time_to_tm(secs, tm);
134	return rtc_valid_tm(tm);
135}
136
137static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
138{
139	int retval, i;
140	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
141	unsigned long no_secs, no_mins, secs = 0;
142
143	if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) {
144		dev_dbg(dev, "year should be equal to or greater than %d\n",
145				AB8500_RTC_EPOCH);
146		return -EINVAL;
147	}
148
149	/* Get the number of seconds since 1970 */
150	rtc_tm_to_time(tm, &secs);
151
152	/*
153	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
154	 * we only have a small counter in the RTC.
155	 */
156	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
157
158	no_mins = secs / 60;
159
160	no_secs = secs % 60;
161	/* Make the seconds count as per the RTC resolution */
162	no_secs = no_secs * COUNTS_PER_SEC;
163
164	buf[4] = no_secs & 0xFF;
165	buf[3] = (no_secs >> 8) & 0xFF;
166
167	buf[2] = no_mins & 0xFF;
168	buf[1] = (no_mins >> 8) & 0xFF;
169	buf[0] = (no_mins >> 16) & 0xFF;
170
171	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
172		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
173			ab8500_rtc_time_regs[i], buf[i]);
174		if (retval < 0)
175			return retval;
176	}
177
178	/* Request a data write */
179	return abx500_set_register_interruptible(dev, AB8500_RTC,
180		AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
181}
182
183static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
184{
185	int retval, i;
186	u8 rtc_ctrl, value;
187	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
188	unsigned long secs, mins;
189
190	/* Check if the alarm is enabled or not */
191	retval = abx500_get_register_interruptible(dev, AB8500_RTC,
192		AB8500_RTC_STAT_REG, &rtc_ctrl);
193	if (retval < 0)
194		return retval;
195
196	if (rtc_ctrl & RTC_ALARM_ENA)
197		alarm->enabled = 1;
198	else
199		alarm->enabled = 0;
200
201	alarm->pending = 0;
202
203	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
204		retval = abx500_get_register_interruptible(dev, AB8500_RTC,
205			ab8500_rtc_alarm_regs[i], &value);
206		if (retval < 0)
207			return retval;
208		buf[i] = value;
209	}
210
211	mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
212	secs = mins * 60;
213
214	/* Add back the initially subtracted number of seconds */
215	secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
216
217	rtc_time_to_tm(secs, &alarm->time);
218
219	return rtc_valid_tm(&alarm->time);
220}
221
222static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
223{
224	return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
225		AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
226		enabled ? RTC_ALARM_ENA : 0);
227}
228
229static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
230{
231	int retval, i;
232	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
233	unsigned long mins, secs = 0, cursec = 0;
234	struct rtc_time curtm;
235
236	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
237		dev_dbg(dev, "year should be equal to or greater than %d\n",
238				AB8500_RTC_EPOCH);
239		return -EINVAL;
240	}
241
242	/* Get the number of seconds since 1970 */
243	rtc_tm_to_time(&alarm->time, &secs);
244
245	/*
246	 * Check whether alarm is set less than 1min.
247	 * Since our RTC doesn't support alarm resolution less than 1min,
248	 * return -EINVAL, so UIE EMUL can take it up, incase of UIE_ON
249	 */
250	ab8500_rtc_read_time(dev, &curtm); /* Read current time */
251	rtc_tm_to_time(&curtm, &cursec);
252	if ((secs - cursec) < 59) {
253		dev_dbg(dev, "Alarm less than 1 minute not supported\r\n");
254		return -EINVAL;
255	}
256
257	/*
258	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
259	 * we only have a small counter in the RTC.
260	 */
261	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
262
263	mins = secs / 60;
264
265	buf[2] = mins & 0xFF;
266	buf[1] = (mins >> 8) & 0xFF;
267	buf[0] = (mins >> 16) & 0xFF;
268
269	/* Set the alarm time */
270	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
271		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
272			ab8500_rtc_alarm_regs[i], buf[i]);
273		if (retval < 0)
274			return retval;
275	}
276
277	return ab8500_rtc_irq_enable(dev, alarm->enabled);
278}
279
280static int ab8540_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
281{
282	int retval, i;
283	unsigned char buf[ARRAY_SIZE(ab8540_rtc_alarm_regs)];
284	unsigned long mins, secs = 0;
285
286	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
287		dev_dbg(dev, "year should be equal to or greater than %d\n",
288				AB8500_RTC_EPOCH);
289		return -EINVAL;
290	}
291
292	/* Get the number of seconds since 1970 */
293	rtc_tm_to_time(&alarm->time, &secs);
294
295	/*
296	 * Convert it to the number of seconds since 01-01-2000 00:00:00
297	 */
298	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
299	mins = secs / 60;
300
301	buf[3] = secs % 60;
302	buf[2] = mins & 0xFF;
303	buf[1] = (mins >> 8) & 0xFF;
304	buf[0] = (mins >> 16) & 0xFF;
305
306	/* Set the alarm time */
307	for (i = 0; i < ARRAY_SIZE(ab8540_rtc_alarm_regs); i++) {
308		retval = abx500_set_register_interruptible(dev, AB8500_RTC,
309			ab8540_rtc_alarm_regs[i], buf[i]);
310		if (retval < 0)
311			return retval;
312	}
313
314	return ab8500_rtc_irq_enable(dev, alarm->enabled);
315}
316
317static int ab8500_rtc_set_calibration(struct device *dev, int calibration)
318{
319	int retval;
320	u8  rtccal = 0;
321
322	/*
323	 * Check that the calibration value (which is in units of 0.5
324	 * parts-per-million) is in the AB8500's range for RtcCalibration
325	 * register. -128 (0x80) is not permitted because the AB8500 uses
326	 * a sign-bit rather than two's complement, so 0x80 is just another
327	 * representation of zero.
328	 */
329	if ((calibration < -127) || (calibration > 127)) {
330		dev_err(dev, "RtcCalibration value outside permitted range\n");
331		return -EINVAL;
332	}
333
334	/*
335	 * The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
336	 * so need to convert to this sort of representation before writing
337	 * into RtcCalibration register...
338	 */
339	if (calibration >= 0)
340		rtccal = 0x7F & calibration;
341	else
342		rtccal = ~(calibration - 1) | 0x80;
343
344	retval = abx500_set_register_interruptible(dev, AB8500_RTC,
345			AB8500_RTC_CALIB_REG, rtccal);
346
347	return retval;
348}
349
350static int ab8500_rtc_get_calibration(struct device *dev, int *calibration)
351{
352	int retval;
353	u8  rtccal = 0;
354
355	retval =  abx500_get_register_interruptible(dev, AB8500_RTC,
356			AB8500_RTC_CALIB_REG, &rtccal);
357	if (retval >= 0) {
358		/*
359		 * The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
360		 * so need to convert value from RtcCalibration register into
361		 * a two's complement signed value...
362		 */
363		if (rtccal & 0x80)
364			*calibration = 0 - (rtccal & 0x7F);
365		else
366			*calibration = 0x7F & rtccal;
367	}
368
369	return retval;
370}
371
372static ssize_t ab8500_sysfs_store_rtc_calibration(struct device *dev,
373				struct device_attribute *attr,
374				const char *buf, size_t count)
375{
376	int retval;
377	int calibration = 0;
378
379	if (sscanf(buf, " %i ", &calibration) != 1) {
380		dev_err(dev, "Failed to store RTC calibration attribute\n");
381		return -EINVAL;
382	}
383
384	retval = ab8500_rtc_set_calibration(dev, calibration);
385
386	return retval ? retval : count;
387}
388
389static ssize_t ab8500_sysfs_show_rtc_calibration(struct device *dev,
390				struct device_attribute *attr, char *buf)
391{
392	int  retval = 0;
393	int  calibration = 0;
394
395	retval = ab8500_rtc_get_calibration(dev, &calibration);
396	if (retval < 0) {
397		dev_err(dev, "Failed to read RTC calibration attribute\n");
398		sprintf(buf, "0\n");
399		return retval;
400	}
401
402	return sprintf(buf, "%d\n", calibration);
403}
404
405static DEVICE_ATTR(rtc_calibration, S_IRUGO | S_IWUSR,
406		   ab8500_sysfs_show_rtc_calibration,
407		   ab8500_sysfs_store_rtc_calibration);
408
409static int ab8500_sysfs_rtc_register(struct device *dev)
410{
411	return device_create_file(dev, &dev_attr_rtc_calibration);
412}
413
414static void ab8500_sysfs_rtc_unregister(struct device *dev)
415{
416	device_remove_file(dev, &dev_attr_rtc_calibration);
417}
418
419static irqreturn_t rtc_alarm_handler(int irq, void *data)
420{
421	struct rtc_device *rtc = data;
422	unsigned long events = RTC_IRQF | RTC_AF;
423
424	dev_dbg(&rtc->dev, "%s\n", __func__);
425	rtc_update_irq(rtc, 1, events);
426
427	return IRQ_HANDLED;
428}
429
430static const struct rtc_class_ops ab8500_rtc_ops = {
431	.read_time		= ab8500_rtc_read_time,
432	.set_time		= ab8500_rtc_set_time,
433	.read_alarm		= ab8500_rtc_read_alarm,
434	.set_alarm		= ab8500_rtc_set_alarm,
435	.alarm_irq_enable	= ab8500_rtc_irq_enable,
436};
437
438static const struct rtc_class_ops ab8540_rtc_ops = {
439	.read_time		= ab8500_rtc_read_time,
440	.set_time		= ab8500_rtc_set_time,
441	.read_alarm		= ab8500_rtc_read_alarm,
442	.set_alarm		= ab8540_rtc_set_alarm,
443	.alarm_irq_enable	= ab8500_rtc_irq_enable,
444};
445
446static const struct platform_device_id ab85xx_rtc_ids[] = {
447	{ "ab8500-rtc", (kernel_ulong_t)&ab8500_rtc_ops, },
448	{ "ab8540-rtc", (kernel_ulong_t)&ab8540_rtc_ops, },
449	{ /* sentinel */ }
450};
451MODULE_DEVICE_TABLE(platform, ab85xx_rtc_ids);
452
453static int ab8500_rtc_probe(struct platform_device *pdev)
454{
455	const struct platform_device_id *platid = platform_get_device_id(pdev);
456	int err;
457	struct rtc_device *rtc;
458	u8 rtc_ctrl;
459	int irq;
460
461	irq = platform_get_irq_byname(pdev, "ALARM");
462	if (irq < 0)
463		return irq;
464
465	/* For RTC supply test */
466	err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
467		AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
468	if (err < 0)
469		return err;
470
471	/* Wait for reset by the PorRtc */
472	usleep_range(1000, 5000);
473
474	err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
475		AB8500_RTC_STAT_REG, &rtc_ctrl);
476	if (err < 0)
477		return err;
478
479	/* Check if the RTC Supply fails */
480	if (!(rtc_ctrl & RTC_STATUS_DATA)) {
481		dev_err(&pdev->dev, "RTC supply failure\n");
482		return -ENODEV;
483	}
484
485	device_init_wakeup(&pdev->dev, true);
486
487	rtc = devm_rtc_device_register(&pdev->dev, "ab8500-rtc",
488				(struct rtc_class_ops *)platid->driver_data,
489				THIS_MODULE);
490	if (IS_ERR(rtc)) {
491		dev_err(&pdev->dev, "Registration failed\n");
492		err = PTR_ERR(rtc);
493		return err;
494	}
495
496	err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
497			rtc_alarm_handler, IRQF_ONESHOT,
498			"ab8500-rtc", rtc);
499	if (err < 0)
500		return err;
 
501
502	dev_pm_set_wake_irq(&pdev->dev, irq);
503	platform_set_drvdata(pdev, rtc);
504
505	err = ab8500_sysfs_rtc_register(&pdev->dev);
506	if (err) {
507		dev_err(&pdev->dev, "sysfs RTC failed to register\n");
508		return err;
509	}
510
511	rtc->uie_unsupported = 1;
512
513	return 0;
514}
515
516static int ab8500_rtc_remove(struct platform_device *pdev)
517{
518	dev_pm_clear_wake_irq(&pdev->dev);
519	device_init_wakeup(&pdev->dev, false);
520	ab8500_sysfs_rtc_unregister(&pdev->dev);
 
 
 
521
522	return 0;
523}
524
525static struct platform_driver ab8500_rtc_driver = {
526	.driver = {
527		.name = "ab8500-rtc",
 
528	},
529	.probe	= ab8500_rtc_probe,
530	.remove = ab8500_rtc_remove,
531	.id_table = ab85xx_rtc_ids,
532};
533
534module_platform_driver(ab8500_rtc_driver);
 
 
 
 
 
 
 
 
535
 
 
536MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
537MODULE_DESCRIPTION("AB8500 RTC Driver");
538MODULE_LICENSE("GPL v2");