1#
  2# Drm device configuration
  3#
  4# This driver provides support for the
  5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
  6#
  7menuconfig DRM
  8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
  9	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
 10	select I2C
 11	select I2C_ALGOBIT
 12	select SLOW_WORK
 13	help
 14	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
 15	  introduced in XFree86 4.0. If you say Y here, you need to select
 16	  the module that's right for your graphics card from the list below.
 17	  These modules provide support for synchronization, security, and
 18	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
 19	  details.  You should also select and configure AGP
 20	  (/dev/agpgart) support if it is available for your platform.
 21
 
 
 
 
 
 22config DRM_KMS_HELPER
 23	tristate
 24	depends on DRM
 25	select FB
 26	select FRAMEBUFFER_CONSOLE if !EXPERT
 27	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
 28	help
 29	  FB and CRTC helpers for KMS drivers.
 30
 
 
 
 
 
 
 
 
 
 
 
 
 31config DRM_TTM
 32	tristate
 33	depends on DRM
 34	help
 35	  GPU memory management subsystem for devices with multiple
 36	  GPU memory types. Will be enabled automatically if a device driver
 37	  uses it.
 38
 39config DRM_TDFX
 40	tristate "3dfx Banshee/Voodoo3+"
 41	depends on DRM && PCI
 42	help
 43	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
 44	  graphics card.  If M is selected, the module will be called tdfx.
 45
 46config DRM_R128
 47	tristate "ATI Rage 128"
 48	depends on DRM && PCI
 49	select FW_LOADER
 50	help
 51	  Choose this option if you have an ATI Rage 128 graphics card.  If M
 52	  is selected, the module will be called r128.  AGP support for
 53	  this card is strongly suggested (unless you have a PCI version).
 54
 55config DRM_RADEON
 56	tristate "ATI Radeon"
 57	depends on DRM && PCI
 58	select FB_CFB_FILLRECT
 59	select FB_CFB_COPYAREA
 60	select FB_CFB_IMAGEBLIT
 61	select FW_LOADER
 62        select DRM_KMS_HELPER
 63        select DRM_TTM
 64	select POWER_SUPPLY
 65	select HWMON
 66	help
 67	  Choose this option if you have an ATI Radeon graphics card.  There
 68	  are both PCI and AGP versions.  You don't need to choose this to
 69	  run the Radeon in plain VGA mode.
 70
 71	  If M is selected, the module will be called radeon.
 72
 73source "drivers/gpu/drm/radeon/Kconfig"
 74
 
 
 75config DRM_I810
 76	tristate "Intel I810"
 77	# !PREEMPT because of missing ioctl locking
 78	depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 79	help
 80	  Choose this option if you have an Intel I810 graphics card.  If M is
 81	  selected, the module will be called i810.  AGP support is required
 82	  for this driver to work.
 83
 84config DRM_I915
 85	tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics"
 86	depends on DRM
 87	depends on AGP
 88	depends on AGP_INTEL
 89	# we need shmfs for the swappable backing store, and in particular
 90	# the shmem_readpage() which depends upon tmpfs
 91	select SHMEM
 92	select TMPFS
 93	select DRM_KMS_HELPER
 94	select FB_CFB_FILLRECT
 95	select FB_CFB_COPYAREA
 96	select FB_CFB_IMAGEBLIT
 97	# i915 depends on ACPI_VIDEO when ACPI is enabled
 98	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
 
 99	select BACKLIGHT_CLASS_DEVICE if ACPI
100	select VIDEO_OUTPUT_CONTROL if ACPI
101	select INPUT if ACPI
102	select ACPI_VIDEO if ACPI
103	select ACPI_BUTTON if ACPI
104	help
105	  Choose this option if you have a system that has "Intel Graphics
106	  Media Accelerator" or "HD Graphics" integrated graphics,
107	  including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G,
108	  G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3,
109	  Core i5, Core i7 as well as Atom CPUs with integrated graphics.
110	  If M is selected, the module will be called i915.  AGP support
111	  is required for this driver to work. This driver is used by
112	  the Intel driver in X.org 6.8 and XFree86 4.4 and above. It
113	  replaces the older i830 module that supported a subset of the
114	  hardware in older X.org releases.
115
116	  Note that the older i810/i815 chipsets require the use of the
117	  i810 driver instead, and the Atom z5xx series has an entirely
118	  different implementation.
119
120config DRM_I915_KMS
121	bool "Enable modesetting on intel by default"
122	depends on DRM_I915
123	help
124	  Choose this option if you want kernel modesetting enabled by default,
125	  and you have a new enough userspace to support this. Running old
126	  userspaces with this enabled will cause pain.  Note that this causes
127	  the driver to bind to PCI devices, which precludes loading things
128	  like intelfb.
129
130config DRM_MGA
131	tristate "Matrox g200/g400"
132	depends on DRM && PCI
133	select FW_LOADER
134	help
135	  Choose this option if you have a Matrox G200, G400 or G450 graphics
136	  card.  If M is selected, the module will be called mga.  AGP
137	  support is required for this driver to work.
138
139config DRM_SIS
140	tristate "SiS video cards"
141	depends on DRM && AGP
142	depends on FB_SIS || FB_SIS=n
143	help
144	  Choose this option if you have a SiS 630 or compatible video
145          chipset. If M is selected the module will be called sis. AGP
146          support is required for this driver to work.
147
148config DRM_VIA
149	tristate "Via unichrome video cards"
150	depends on DRM && PCI
151	help
152	  Choose this option if you have a Via unichrome or compatible video
153	  chipset. If M is selected the module will be called via.
154
155config DRM_SAVAGE
156	tristate "Savage video cards"
157	depends on DRM && PCI
158	help
159	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
160	  chipset. If M is selected the module will be called savage.

  1#
  2# Drm device configuration
  3#
  4# This driver provides support for the
  5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
  6#
  7menuconfig DRM
  8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
  9	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
 10	select I2C
 11	select I2C_ALGOBIT
 12	select DMA_SHARED_BUFFER
 13	help
 14	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
 15	  introduced in XFree86 4.0. If you say Y here, you need to select
 16	  the module that's right for your graphics card from the list below.
 17	  These modules provide support for synchronization, security, and
 18	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
 19	  details.  You should also select and configure AGP
 20	  (/dev/agpgart) support if it is available for your platform.
 21
 22config DRM_USB
 23	tristate
 24	depends on DRM
 25	select USB
 26
 27config DRM_KMS_HELPER
 28	tristate
 29	depends on DRM
 30	select FB
 31	select FRAMEBUFFER_CONSOLE if !EXPERT
 32	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
 33	help
 34	  FB and CRTC helpers for KMS drivers.
 35
 36config DRM_LOAD_EDID_FIRMWARE
 37	bool "Allow to specify an EDID data set instead of probing for it"
 38	depends on DRM_KMS_HELPER
 39	help
 40	  Say Y here, if you want to use EDID data to be loaded from the
 41	  /lib/firmware directory or one of the provided built-in
 42	  data sets. This may be necessary, if the graphics adapter or
 43	  monitor are unable to provide appropriate EDID data. Since this
 44	  feature is provided as a workaround for broken hardware, the
 45	  default case is N. Details and instructions how to build your own
 46	  EDID data are given in Documentation/EDID/HOWTO.txt.
 47
 48config DRM_TTM
 49	tristate
 50	depends on DRM
 51	help
 52	  GPU memory management subsystem for devices with multiple
 53	  GPU memory types. Will be enabled automatically if a device driver
 54	  uses it.
 55
 56config DRM_TDFX
 57	tristate "3dfx Banshee/Voodoo3+"
 58	depends on DRM && PCI
 59	help
 60	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
 61	  graphics card.  If M is selected, the module will be called tdfx.
 62
 63config DRM_R128
 64	tristate "ATI Rage 128"
 65	depends on DRM && PCI
 66	select FW_LOADER
 67	help
 68	  Choose this option if you have an ATI Rage 128 graphics card.  If M
 69	  is selected, the module will be called r128.  AGP support for
 70	  this card is strongly suggested (unless you have a PCI version).
 71
 72config DRM_RADEON
 73	tristate "ATI Radeon"
 74	depends on DRM && PCI
 75	select FB_CFB_FILLRECT
 76	select FB_CFB_COPYAREA
 77	select FB_CFB_IMAGEBLIT
 78	select FW_LOADER
 79        select DRM_KMS_HELPER
 80        select DRM_TTM
 81	select POWER_SUPPLY
 82	select HWMON
 83	help
 84	  Choose this option if you have an ATI Radeon graphics card.  There
 85	  are both PCI and AGP versions.  You don't need to choose this to
 86	  run the Radeon in plain VGA mode.
 87
 88	  If M is selected, the module will be called radeon.
 89
 90source "drivers/gpu/drm/radeon/Kconfig"
 91
 92source "drivers/gpu/drm/nouveau/Kconfig"
 93
 94config DRM_I810
 95	tristate "Intel I810"
 96	# !PREEMPT because of missing ioctl locking
 97	depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 98	help
 99	  Choose this option if you have an Intel I810 graphics card.  If M is
100	  selected, the module will be called i810.  AGP support is required
101	  for this driver to work.
102
103config DRM_I915
104	tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics"
105	depends on DRM
106	depends on AGP
107	depends on AGP_INTEL
108	# we need shmfs for the swappable backing store, and in particular
109	# the shmem_readpage() which depends upon tmpfs
110	select SHMEM
111	select TMPFS
112	select DRM_KMS_HELPER
113	select FB_CFB_FILLRECT
114	select FB_CFB_COPYAREA
115	select FB_CFB_IMAGEBLIT
116	# i915 depends on ACPI_VIDEO when ACPI is enabled
117	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
118	select BACKLIGHT_LCD_SUPPORT if ACPI
119	select BACKLIGHT_CLASS_DEVICE if ACPI
120	select VIDEO_OUTPUT_CONTROL if ACPI
121	select INPUT if ACPI
122	select ACPI_VIDEO if ACPI
123	select ACPI_BUTTON if ACPI
124	help
125	  Choose this option if you have a system that has "Intel Graphics
126	  Media Accelerator" or "HD Graphics" integrated graphics,
127	  including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G,
128	  G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3,
129	  Core i5, Core i7 as well as Atom CPUs with integrated graphics.
130	  If M is selected, the module will be called i915.  AGP support
131	  is required for this driver to work. This driver is used by
132	  the Intel driver in X.org 6.8 and XFree86 4.4 and above. It
133	  replaces the older i830 module that supported a subset of the
134	  hardware in older X.org releases.
135
136	  Note that the older i810/i815 chipsets require the use of the
137	  i810 driver instead, and the Atom z5xx series has an entirely
138	  different implementation.
139
140config DRM_I915_KMS
141	bool "Enable modesetting on intel by default"
142	depends on DRM_I915
143	help
144	  Choose this option if you want kernel modesetting enabled by default,
145	  and you have a new enough userspace to support this. Running old
146	  userspaces with this enabled will cause pain.  Note that this causes
147	  the driver to bind to PCI devices, which precludes loading things
148	  like intelfb.
149
150config DRM_MGA
151	tristate "Matrox g200/g400"
152	depends on DRM && PCI
153	select FW_LOADER
154	help
155	  Choose this option if you have a Matrox G200, G400 or G450 graphics
156	  card.  If M is selected, the module will be called mga.  AGP
157	  support is required for this driver to work.
158
159config DRM_SIS
160	tristate "SiS video cards"
161	depends on DRM && AGP
162	depends on FB_SIS || FB_SIS=n
163	help
164	  Choose this option if you have a SiS 630 or compatible video
165          chipset. If M is selected the module will be called sis. AGP
166          support is required for this driver to work.
167
168config DRM_VIA
169	tristate "Via unichrome video cards"
170	depends on DRM && PCI
171	help
172	  Choose this option if you have a Via unichrome or compatible video
173	  chipset. If M is selected the module will be called via.
174
175config DRM_SAVAGE
176	tristate "Savage video cards"
177	depends on DRM && PCI
178	help
179	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
180	  chipset. If M is selected the module will be called savage.
181
182source "drivers/gpu/drm/exynos/Kconfig"
183
184source "drivers/gpu/drm/vmwgfx/Kconfig"
185
186source "drivers/gpu/drm/gma500/Kconfig"
187
188source "drivers/gpu/drm/udl/Kconfig"
189
190source "drivers/gpu/drm/ast/Kconfig"
191
192source "drivers/gpu/drm/mgag200/Kconfig"
193
194source "drivers/gpu/drm/cirrus/Kconfig"