Loading...
1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
10 select I2C
11 select I2C_ALGOBIT
12 select SLOW_WORK
13 help
14 Kernel-level support for the Direct Rendering Infrastructure (DRI)
15 introduced in XFree86 4.0. If you say Y here, you need to select
16 the module that's right for your graphics card from the list below.
17 These modules provide support for synchronization, security, and
18 DMA transfers. Please see <http://dri.sourceforge.net/> for more
19 details. You should also select and configure AGP
20 (/dev/agpgart) support if it is available for your platform.
21
22config DRM_KMS_HELPER
23 tristate
24 depends on DRM
25 select FB
26 select FRAMEBUFFER_CONSOLE if !EXPERT
27 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
28 help
29 FB and CRTC helpers for KMS drivers.
30
31config DRM_TTM
32 tristate
33 depends on DRM
34 help
35 GPU memory management subsystem for devices with multiple
36 GPU memory types. Will be enabled automatically if a device driver
37 uses it.
38
39config DRM_TDFX
40 tristate "3dfx Banshee/Voodoo3+"
41 depends on DRM && PCI
42 help
43 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
44 graphics card. If M is selected, the module will be called tdfx.
45
46config DRM_R128
47 tristate "ATI Rage 128"
48 depends on DRM && PCI
49 select FW_LOADER
50 help
51 Choose this option if you have an ATI Rage 128 graphics card. If M
52 is selected, the module will be called r128. AGP support for
53 this card is strongly suggested (unless you have a PCI version).
54
55config DRM_RADEON
56 tristate "ATI Radeon"
57 depends on DRM && PCI
58 select FB_CFB_FILLRECT
59 select FB_CFB_COPYAREA
60 select FB_CFB_IMAGEBLIT
61 select FW_LOADER
62 select DRM_KMS_HELPER
63 select DRM_TTM
64 select POWER_SUPPLY
65 select HWMON
66 help
67 Choose this option if you have an ATI Radeon graphics card. There
68 are both PCI and AGP versions. You don't need to choose this to
69 run the Radeon in plain VGA mode.
70
71 If M is selected, the module will be called radeon.
72
73source "drivers/gpu/drm/radeon/Kconfig"
74
75config DRM_I810
76 tristate "Intel I810"
77 # !PREEMPT because of missing ioctl locking
78 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
79 help
80 Choose this option if you have an Intel I810 graphics card. If M is
81 selected, the module will be called i810. AGP support is required
82 for this driver to work.
83
84config DRM_I915
85 tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics"
86 depends on DRM
87 depends on AGP
88 depends on AGP_INTEL
89 # we need shmfs for the swappable backing store, and in particular
90 # the shmem_readpage() which depends upon tmpfs
91 select SHMEM
92 select TMPFS
93 select DRM_KMS_HELPER
94 select FB_CFB_FILLRECT
95 select FB_CFB_COPYAREA
96 select FB_CFB_IMAGEBLIT
97 # i915 depends on ACPI_VIDEO when ACPI is enabled
98 # but for select to work, need to select ACPI_VIDEO's dependencies, ick
99 select BACKLIGHT_CLASS_DEVICE if ACPI
100 select VIDEO_OUTPUT_CONTROL if ACPI
101 select INPUT if ACPI
102 select ACPI_VIDEO if ACPI
103 select ACPI_BUTTON if ACPI
104 help
105 Choose this option if you have a system that has "Intel Graphics
106 Media Accelerator" or "HD Graphics" integrated graphics,
107 including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G,
108 G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3,
109 Core i5, Core i7 as well as Atom CPUs with integrated graphics.
110 If M is selected, the module will be called i915. AGP support
111 is required for this driver to work. This driver is used by
112 the Intel driver in X.org 6.8 and XFree86 4.4 and above. It
113 replaces the older i830 module that supported a subset of the
114 hardware in older X.org releases.
115
116 Note that the older i810/i815 chipsets require the use of the
117 i810 driver instead, and the Atom z5xx series has an entirely
118 different implementation.
119
120config DRM_I915_KMS
121 bool "Enable modesetting on intel by default"
122 depends on DRM_I915
123 help
124 Choose this option if you want kernel modesetting enabled by default,
125 and you have a new enough userspace to support this. Running old
126 userspaces with this enabled will cause pain. Note that this causes
127 the driver to bind to PCI devices, which precludes loading things
128 like intelfb.
129
130config DRM_MGA
131 tristate "Matrox g200/g400"
132 depends on DRM && PCI
133 select FW_LOADER
134 help
135 Choose this option if you have a Matrox G200, G400 or G450 graphics
136 card. If M is selected, the module will be called mga. AGP
137 support is required for this driver to work.
138
139config DRM_SIS
140 tristate "SiS video cards"
141 depends on DRM && AGP
142 depends on FB_SIS || FB_SIS=n
143 help
144 Choose this option if you have a SiS 630 or compatible video
145 chipset. If M is selected the module will be called sis. AGP
146 support is required for this driver to work.
147
148config DRM_VIA
149 tristate "Via unichrome video cards"
150 depends on DRM && PCI
151 help
152 Choose this option if you have a Via unichrome or compatible video
153 chipset. If M is selected the module will be called via.
154
155config DRM_SAVAGE
156 tristate "Savage video cards"
157 depends on DRM && PCI
158 help
159 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
160 chipset. If M is selected the module will be called savage.
1#
2# Drm device configuration
3#
4# This driver provides support for the
5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
6#
7menuconfig DRM
8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
10 select HDMI
11 select I2C
12 select I2C_ALGOBIT
13 select DMA_SHARED_BUFFER
14 help
15 Kernel-level support for the Direct Rendering Infrastructure (DRI)
16 introduced in XFree86 4.0. If you say Y here, you need to select
17 the module that's right for your graphics card from the list below.
18 These modules provide support for synchronization, security, and
19 DMA transfers. Please see <http://dri.sourceforge.net/> for more
20 details. You should also select and configure AGP
21 (/dev/agpgart) support if it is available for your platform.
22
23config DRM_MIPI_DSI
24 bool
25 depends on DRM
26
27config DRM_USB
28 tristate
29 depends on DRM
30 depends on USB_SUPPORT && USB_ARCH_HAS_HCD
31 select USB
32
33config DRM_KMS_HELPER
34 tristate
35 depends on DRM
36 help
37 CRTC helpers for KMS drivers.
38
39config DRM_KMS_FB_HELPER
40 bool
41 depends on DRM_KMS_HELPER
42 select FB
43 select FRAMEBUFFER_CONSOLE if !EXPERT
44 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
45 help
46 FBDEV helpers for KMS drivers.
47
48config DRM_LOAD_EDID_FIRMWARE
49 bool "Allow to specify an EDID data set instead of probing for it"
50 depends on DRM_KMS_HELPER
51 help
52 Say Y here, if you want to use EDID data to be loaded from the
53 /lib/firmware directory or one of the provided built-in
54 data sets. This may be necessary, if the graphics adapter or
55 monitor are unable to provide appropriate EDID data. Since this
56 feature is provided as a workaround for broken hardware, the
57 default case is N. Details and instructions how to build your own
58 EDID data are given in Documentation/EDID/HOWTO.txt.
59
60config DRM_TTM
61 tristate
62 depends on DRM
63 help
64 GPU memory management subsystem for devices with multiple
65 GPU memory types. Will be enabled automatically if a device driver
66 uses it.
67
68config DRM_GEM_CMA_HELPER
69 bool
70 depends on DRM
71 help
72 Choose this if you need the GEM CMA helper functions
73
74config DRM_KMS_CMA_HELPER
75 bool
76 select DRM_GEM_CMA_HELPER
77 select DRM_KMS_FB_HELPER
78 select FB_SYS_FILLRECT
79 select FB_SYS_COPYAREA
80 select FB_SYS_IMAGEBLIT
81 help
82 Choose this if you need the KMS CMA helper functions
83
84source "drivers/gpu/drm/i2c/Kconfig"
85
86config DRM_TDFX
87 tristate "3dfx Banshee/Voodoo3+"
88 depends on DRM && PCI
89 help
90 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
91 graphics card. If M is selected, the module will be called tdfx.
92
93config DRM_R128
94 tristate "ATI Rage 128"
95 depends on DRM && PCI
96 select FW_LOADER
97 help
98 Choose this option if you have an ATI Rage 128 graphics card. If M
99 is selected, the module will be called r128. AGP support for
100 this card is strongly suggested (unless you have a PCI version).
101
102config DRM_RADEON
103 tristate "ATI Radeon"
104 depends on DRM && PCI
105 select FB_CFB_FILLRECT
106 select FB_CFB_COPYAREA
107 select FB_CFB_IMAGEBLIT
108 select FW_LOADER
109 select DRM_KMS_HELPER
110 select DRM_KMS_FB_HELPER
111 select DRM_TTM
112 select POWER_SUPPLY
113 select HWMON
114 select BACKLIGHT_CLASS_DEVICE
115 help
116 Choose this option if you have an ATI Radeon graphics card. There
117 are both PCI and AGP versions. You don't need to choose this to
118 run the Radeon in plain VGA mode.
119
120 If M is selected, the module will be called radeon.
121
122source "drivers/gpu/drm/radeon/Kconfig"
123
124source "drivers/gpu/drm/nouveau/Kconfig"
125
126config DRM_I810
127 tristate "Intel I810"
128 # !PREEMPT because of missing ioctl locking
129 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
130 help
131 Choose this option if you have an Intel I810 graphics card. If M is
132 selected, the module will be called i810. AGP support is required
133 for this driver to work.
134
135source "drivers/gpu/drm/i915/Kconfig"
136
137config DRM_MGA
138 tristate "Matrox g200/g400"
139 depends on DRM && PCI
140 select FW_LOADER
141 help
142 Choose this option if you have a Matrox G200, G400 or G450 graphics
143 card. If M is selected, the module will be called mga. AGP
144 support is required for this driver to work.
145
146config DRM_SIS
147 tristate "SiS video cards"
148 depends on DRM && AGP
149 depends on FB_SIS || FB_SIS=n
150 help
151 Choose this option if you have a SiS 630 or compatible video
152 chipset. If M is selected the module will be called sis. AGP
153 support is required for this driver to work.
154
155config DRM_VIA
156 tristate "Via unichrome video cards"
157 depends on DRM && PCI
158 help
159 Choose this option if you have a Via unichrome or compatible video
160 chipset. If M is selected the module will be called via.
161
162config DRM_SAVAGE
163 tristate "Savage video cards"
164 depends on DRM && PCI
165 help
166 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
167 chipset. If M is selected the module will be called savage.
168
169source "drivers/gpu/drm/exynos/Kconfig"
170
171source "drivers/gpu/drm/vmwgfx/Kconfig"
172
173source "drivers/gpu/drm/gma500/Kconfig"
174
175source "drivers/gpu/drm/udl/Kconfig"
176
177source "drivers/gpu/drm/ast/Kconfig"
178
179source "drivers/gpu/drm/mgag200/Kconfig"
180
181source "drivers/gpu/drm/cirrus/Kconfig"
182
183source "drivers/gpu/drm/armada/Kconfig"
184
185source "drivers/gpu/drm/rcar-du/Kconfig"
186
187source "drivers/gpu/drm/shmobile/Kconfig"
188
189source "drivers/gpu/drm/omapdrm/Kconfig"
190
191source "drivers/gpu/drm/tilcdc/Kconfig"
192
193source "drivers/gpu/drm/qxl/Kconfig"
194
195source "drivers/gpu/drm/bochs/Kconfig"
196
197source "drivers/gpu/drm/msm/Kconfig"
198
199source "drivers/gpu/drm/tegra/Kconfig"
200
201source "drivers/gpu/drm/panel/Kconfig"
202
203source "drivers/gpu/drm/bridge/Kconfig"