Loading...
1#ifndef CYPRESS_M8_H
2#define CYPRESS_M8_H
3
4/*
5 * definitions and function prototypes used for the cypress USB to Serial
6 * controller
7 */
8
9/*
10 * For sending our feature buffer - controlling serial communication states.
11 * Linux HID has no support for serial devices so we do this through the driver
12 */
13#define HID_REQ_GET_REPORT 0x01
14#define HID_REQ_SET_REPORT 0x09
15
16/* List other cypress USB to Serial devices here, and add them to the id_table */
17
18/* DeLorme Earthmate USB - a GPS device */
19#define VENDOR_ID_DELORME 0x1163
20#define PRODUCT_ID_EARTHMATEUSB 0x0100
21#define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200
22
23/* Cypress HID->COM RS232 Adapter */
24#define VENDOR_ID_CYPRESS 0x04b4
25#define PRODUCT_ID_CYPHIDCOM 0x5500
26
27/* Powercom UPS, chip CY7C63723 */
28#define VENDOR_ID_POWERCOM 0x0d9f
29#define PRODUCT_ID_UPS 0x0002
30
31/* Nokia CA-42 USB to serial cable */
32#define VENDOR_ID_DAZZLE 0x07d0
33#define PRODUCT_ID_CA42 0x4101
34/* End of device listing */
35
36/* Used for setting / requesting serial line settings */
37#define CYPRESS_SET_CONFIG 0x01
38#define CYPRESS_GET_CONFIG 0x02
39
40/* Used for throttle control */
41#define THROTTLED 0x1
42#define ACTUALLY_THROTTLED 0x2
43
44/*
45 * chiptypes - used in case firmware differs from the generic form ... offering
46 * different baud speeds/etc.
47 */
48#define CT_EARTHMATE 0x01
49#define CT_CYPHIDCOM 0x02
50#define CT_CA42V2 0x03
51#define CT_GENERIC 0x0F
52/* End of chiptype definitions */
53
54/* RS-232 serial data communication protocol definitions */
55/* these are sent / read at byte 0 of the input/output hid reports */
56/* You can find these values defined in the CY4601 USB to Serial design notes */
57
58#define CONTROL_DTR 0x20 /* data terminal ready - flow control - host to device */
59#define UART_DSR 0x20 /* data set ready - flow control - device to host */
60#define CONTROL_RTS 0x10 /* request to send - flow control - host to device */
61#define UART_CTS 0x10 /* clear to send - flow control - device to host */
62#define UART_RI 0x10 /* ring indicator - modem - device to host */
63#define UART_CD 0x40 /* carrier detect - modem - device to host */
64#define CYP_ERROR 0x08 /* received from input report - device to host */
65/* Note - the below has nothing to do with the "feature report" reset */
66#define CONTROL_RESET 0x08 /* sent with output report - host to device */
67
68/* End of RS-232 protocol definitions */
69
70#endif /* CYPRESS_M8_H */
1#ifndef CYPRESS_M8_H
2#define CYPRESS_M8_H
3
4/*
5 * definitions and function prototypes used for the cypress USB to Serial
6 * controller
7 */
8
9/*
10 * For sending our feature buffer - controlling serial communication states.
11 * Linux HID has no support for serial devices so we do this through the driver
12 */
13#define HID_REQ_GET_REPORT 0x01
14#define HID_REQ_SET_REPORT 0x09
15
16/* List other cypress USB to Serial devices here, and add them to the id_table */
17
18/* DeLorme Earthmate USB - a GPS device */
19#define VENDOR_ID_DELORME 0x1163
20#define PRODUCT_ID_EARTHMATEUSB 0x0100
21#define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200
22
23/* Cypress HID->COM RS232 Adapter */
24#define VENDOR_ID_CYPRESS 0x04b4
25#define PRODUCT_ID_CYPHIDCOM 0x5500
26
27/* FRWD Dongle - a GPS sports watch */
28#define VENDOR_ID_FRWD 0x6737
29#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
30
31/* Powercom UPS, chip CY7C63723 */
32#define VENDOR_ID_POWERCOM 0x0d9f
33#define PRODUCT_ID_UPS 0x0002
34
35/* Nokia CA-42 USB to serial cable */
36#define VENDOR_ID_DAZZLE 0x07d0
37#define PRODUCT_ID_CA42 0x4101
38/* End of device listing */
39
40/* Used for setting / requesting serial line settings */
41#define CYPRESS_SET_CONFIG 0x01
42#define CYPRESS_GET_CONFIG 0x02
43
44/* Used for throttle control */
45#define THROTTLED 0x1
46#define ACTUALLY_THROTTLED 0x2
47
48/*
49 * chiptypes - used in case firmware differs from the generic form ... offering
50 * different baud speeds/etc.
51 */
52#define CT_EARTHMATE 0x01
53#define CT_CYPHIDCOM 0x02
54#define CT_CA42V2 0x03
55#define CT_GENERIC 0x0F
56/* End of chiptype definitions */
57
58/*
59 * RS-232 serial data communication protocol definitions.
60 *
61 * These are sent / read at byte 0 of the input/output hid reports.
62 * You can find these values defined in the CY4601 USB to Serial design notes.
63 */
64
65#define CONTROL_DTR 0x20 /* data terminal ready */
66#define CONTROL_RTS 0x10 /* request to send */
67#define CONTROL_RESET 0x08 /* sent with output report */
68
69#define UART_MSR_MASK 0xf0
70#define UART_RI 0x80 /* ring indicator */
71#define UART_CD 0x40 /* carrier detect */
72#define UART_DSR 0x20 /* data set ready */
73#define UART_CTS 0x10 /* clear to send */
74#define CYP_ERROR 0x08 /* received from input report */
75
76/* End of RS-232 protocol definitions */
77
78#endif /* CYPRESS_M8_H */