Loading...
1/*
2 * Copyright © 2006-2007 Intel Corporation
3 * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining a
6 * copy of this software and associated documentation files (the "Software"),
7 * to deal in the Software without restriction, including without limitation
8 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
9 * and/or sell copies of the Software, and to permit persons to whom the
10 * Software is furnished to do so, subject to the following conditions:
11 *
12 * The above copyright notice and this permission notice (including the next
13 * paragraph) shall be included in all copies or substantial portions of the
14 * Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
21 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
22 * DEALINGS IN THE SOFTWARE.
23 *
24 * Authors:
25 * Eric Anholt <eric@anholt.net>
26 * Dave Airlie <airlied@linux.ie>
27 * Jesse Barnes <jesse.barnes@intel.com>
28 */
29
30#include <acpi/button.h>
31#include <linux/dmi.h>
32#include <linux/i2c.h>
33#include <linux/slab.h>
34#include "drmP.h"
35#include "drm.h"
36#include "drm_crtc.h"
37#include "drm_edid.h"
38#include "intel_drv.h"
39#include "i915_drm.h"
40#include "i915_drv.h"
41#include <linux/acpi.h>
42
43/* Private structure for the integrated LVDS support */
44struct intel_lvds {
45 struct intel_encoder base;
46
47 struct edid *edid;
48
49 int fitting_mode;
50 u32 pfit_control;
51 u32 pfit_pgm_ratios;
52 bool pfit_dirty;
53
54 struct drm_display_mode *fixed_mode;
55};
56
57static struct intel_lvds *to_intel_lvds(struct drm_encoder *encoder)
58{
59 return container_of(encoder, struct intel_lvds, base.base);
60}
61
62static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector)
63{
64 return container_of(intel_attached_encoder(connector),
65 struct intel_lvds, base);
66}
67
68/**
69 * Sets the power state for the panel.
70 */
71static void intel_lvds_enable(struct intel_lvds *intel_lvds)
72{
73 struct drm_device *dev = intel_lvds->base.base.dev;
74 struct drm_i915_private *dev_priv = dev->dev_private;
75 u32 ctl_reg, lvds_reg, stat_reg;
76
77 if (HAS_PCH_SPLIT(dev)) {
78 ctl_reg = PCH_PP_CONTROL;
79 lvds_reg = PCH_LVDS;
80 stat_reg = PCH_PP_STATUS;
81 } else {
82 ctl_reg = PP_CONTROL;
83 lvds_reg = LVDS;
84 stat_reg = PP_STATUS;
85 }
86
87 I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
88
89 if (intel_lvds->pfit_dirty) {
90 /*
91 * Enable automatic panel scaling so that non-native modes
92 * fill the screen. The panel fitter should only be
93 * adjusted whilst the pipe is disabled, according to
94 * register description and PRM.
95 */
96 DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
97 intel_lvds->pfit_control,
98 intel_lvds->pfit_pgm_ratios);
99
100 I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
101 I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
102 intel_lvds->pfit_dirty = false;
103 }
104
105 I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
106 POSTING_READ(lvds_reg);
107 if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
108 DRM_ERROR("timed out waiting for panel to power on\n");
109
110 intel_panel_enable_backlight(dev);
111}
112
113static void intel_lvds_disable(struct intel_lvds *intel_lvds)
114{
115 struct drm_device *dev = intel_lvds->base.base.dev;
116 struct drm_i915_private *dev_priv = dev->dev_private;
117 u32 ctl_reg, lvds_reg, stat_reg;
118
119 if (HAS_PCH_SPLIT(dev)) {
120 ctl_reg = PCH_PP_CONTROL;
121 lvds_reg = PCH_LVDS;
122 stat_reg = PCH_PP_STATUS;
123 } else {
124 ctl_reg = PP_CONTROL;
125 lvds_reg = LVDS;
126 stat_reg = PP_STATUS;
127 }
128
129 intel_panel_disable_backlight(dev);
130
131 I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
132 if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000))
133 DRM_ERROR("timed out waiting for panel to power off\n");
134
135 if (intel_lvds->pfit_control) {
136 I915_WRITE(PFIT_CONTROL, 0);
137 intel_lvds->pfit_dirty = true;
138 }
139
140 I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
141 POSTING_READ(lvds_reg);
142}
143
144static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
145{
146 struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
147
148 if (mode == DRM_MODE_DPMS_ON)
149 intel_lvds_enable(intel_lvds);
150 else
151 intel_lvds_disable(intel_lvds);
152
153 /* XXX: We never power down the LVDS pairs. */
154}
155
156static int intel_lvds_mode_valid(struct drm_connector *connector,
157 struct drm_display_mode *mode)
158{
159 struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
160 struct drm_display_mode *fixed_mode = intel_lvds->fixed_mode;
161
162 if (mode->hdisplay > fixed_mode->hdisplay)
163 return MODE_PANEL;
164 if (mode->vdisplay > fixed_mode->vdisplay)
165 return MODE_PANEL;
166
167 return MODE_OK;
168}
169
170static void
171centre_horizontally(struct drm_display_mode *mode,
172 int width)
173{
174 u32 border, sync_pos, blank_width, sync_width;
175
176 /* keep the hsync and hblank widths constant */
177 sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
178 blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
179 sync_pos = (blank_width - sync_width + 1) / 2;
180
181 border = (mode->hdisplay - width + 1) / 2;
182 border += border & 1; /* make the border even */
183
184 mode->crtc_hdisplay = width;
185 mode->crtc_hblank_start = width + border;
186 mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
187
188 mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
189 mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
190}
191
192static void
193centre_vertically(struct drm_display_mode *mode,
194 int height)
195{
196 u32 border, sync_pos, blank_width, sync_width;
197
198 /* keep the vsync and vblank widths constant */
199 sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
200 blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
201 sync_pos = (blank_width - sync_width + 1) / 2;
202
203 border = (mode->vdisplay - height + 1) / 2;
204
205 mode->crtc_vdisplay = height;
206 mode->crtc_vblank_start = height + border;
207 mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
208
209 mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
210 mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
211}
212
213static inline u32 panel_fitter_scaling(u32 source, u32 target)
214{
215 /*
216 * Floating point operation is not supported. So the FACTOR
217 * is defined, which can avoid the floating point computation
218 * when calculating the panel ratio.
219 */
220#define ACCURACY 12
221#define FACTOR (1 << ACCURACY)
222 u32 ratio = source * FACTOR / target;
223 return (FACTOR * ratio + FACTOR/2) / FACTOR;
224}
225
226static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
227 struct drm_display_mode *mode,
228 struct drm_display_mode *adjusted_mode)
229{
230 struct drm_device *dev = encoder->dev;
231 struct drm_i915_private *dev_priv = dev->dev_private;
232 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
233 struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
234 struct drm_encoder *tmp_encoder;
235 u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
236 int pipe;
237
238 /* Should never happen!! */
239 if (INTEL_INFO(dev)->gen < 4 && intel_crtc->pipe == 0) {
240 DRM_ERROR("Can't support LVDS on pipe A\n");
241 return false;
242 }
243
244 /* Should never happen!! */
245 list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
246 if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
247 DRM_ERROR("Can't enable LVDS and another "
248 "encoder on the same pipe\n");
249 return false;
250 }
251 }
252
253 /*
254 * We have timings from the BIOS for the panel, put them in
255 * to the adjusted mode. The CRTC will be set up for this mode,
256 * with the panel scaling set up to source from the H/VDisplay
257 * of the original mode.
258 */
259 intel_fixed_panel_mode(intel_lvds->fixed_mode, adjusted_mode);
260
261 if (HAS_PCH_SPLIT(dev)) {
262 intel_pch_panel_fitting(dev, intel_lvds->fitting_mode,
263 mode, adjusted_mode);
264 return true;
265 }
266
267 /* Native modes don't need fitting */
268 if (adjusted_mode->hdisplay == mode->hdisplay &&
269 adjusted_mode->vdisplay == mode->vdisplay)
270 goto out;
271
272 /* 965+ wants fuzzy fitting */
273 if (INTEL_INFO(dev)->gen >= 4)
274 pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
275 PFIT_FILTER_FUZZY);
276
277 /*
278 * Enable automatic panel scaling for non-native modes so that they fill
279 * the screen. Should be enabled before the pipe is enabled, according
280 * to register description and PRM.
281 * Change the value here to see the borders for debugging
282 */
283 for_each_pipe(pipe)
284 I915_WRITE(BCLRPAT(pipe), 0);
285
286 switch (intel_lvds->fitting_mode) {
287 case DRM_MODE_SCALE_CENTER:
288 /*
289 * For centered modes, we have to calculate border widths &
290 * heights and modify the values programmed into the CRTC.
291 */
292 centre_horizontally(adjusted_mode, mode->hdisplay);
293 centre_vertically(adjusted_mode, mode->vdisplay);
294 border = LVDS_BORDER_ENABLE;
295 break;
296
297 case DRM_MODE_SCALE_ASPECT:
298 /* Scale but preserve the aspect ratio */
299 if (INTEL_INFO(dev)->gen >= 4) {
300 u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
301 u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
302
303 /* 965+ is easy, it does everything in hw */
304 if (scaled_width > scaled_height)
305 pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR;
306 else if (scaled_width < scaled_height)
307 pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER;
308 else if (adjusted_mode->hdisplay != mode->hdisplay)
309 pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
310 } else {
311 u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
312 u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
313 /*
314 * For earlier chips we have to calculate the scaling
315 * ratio by hand and program it into the
316 * PFIT_PGM_RATIO register
317 */
318 if (scaled_width > scaled_height) { /* pillar */
319 centre_horizontally(adjusted_mode, scaled_height / mode->vdisplay);
320
321 border = LVDS_BORDER_ENABLE;
322 if (mode->vdisplay != adjusted_mode->vdisplay) {
323 u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
324 pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
325 bits << PFIT_VERT_SCALE_SHIFT);
326 pfit_control |= (PFIT_ENABLE |
327 VERT_INTERP_BILINEAR |
328 HORIZ_INTERP_BILINEAR);
329 }
330 } else if (scaled_width < scaled_height) { /* letter */
331 centre_vertically(adjusted_mode, scaled_width / mode->hdisplay);
332
333 border = LVDS_BORDER_ENABLE;
334 if (mode->hdisplay != adjusted_mode->hdisplay) {
335 u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
336 pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
337 bits << PFIT_VERT_SCALE_SHIFT);
338 pfit_control |= (PFIT_ENABLE |
339 VERT_INTERP_BILINEAR |
340 HORIZ_INTERP_BILINEAR);
341 }
342 } else
343 /* Aspects match, Let hw scale both directions */
344 pfit_control |= (PFIT_ENABLE |
345 VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
346 VERT_INTERP_BILINEAR |
347 HORIZ_INTERP_BILINEAR);
348 }
349 break;
350
351 case DRM_MODE_SCALE_FULLSCREEN:
352 /*
353 * Full scaling, even if it changes the aspect ratio.
354 * Fortunately this is all done for us in hw.
355 */
356 if (mode->vdisplay != adjusted_mode->vdisplay ||
357 mode->hdisplay != adjusted_mode->hdisplay) {
358 pfit_control |= PFIT_ENABLE;
359 if (INTEL_INFO(dev)->gen >= 4)
360 pfit_control |= PFIT_SCALING_AUTO;
361 else
362 pfit_control |= (VERT_AUTO_SCALE |
363 VERT_INTERP_BILINEAR |
364 HORIZ_AUTO_SCALE |
365 HORIZ_INTERP_BILINEAR);
366 }
367 break;
368
369 default:
370 break;
371 }
372
373out:
374 /* If not enabling scaling, be consistent and always use 0. */
375 if ((pfit_control & PFIT_ENABLE) == 0) {
376 pfit_control = 0;
377 pfit_pgm_ratios = 0;
378 }
379
380 /* Make sure pre-965 set dither correctly */
381 if (INTEL_INFO(dev)->gen < 4 && dev_priv->lvds_dither)
382 pfit_control |= PANEL_8TO6_DITHER_ENABLE;
383
384 if (pfit_control != intel_lvds->pfit_control ||
385 pfit_pgm_ratios != intel_lvds->pfit_pgm_ratios) {
386 intel_lvds->pfit_control = pfit_control;
387 intel_lvds->pfit_pgm_ratios = pfit_pgm_ratios;
388 intel_lvds->pfit_dirty = true;
389 }
390 dev_priv->lvds_border_bits = border;
391
392 /*
393 * XXX: It would be nice to support lower refresh rates on the
394 * panels to reduce power consumption, and perhaps match the
395 * user's requested refresh rate.
396 */
397
398 return true;
399}
400
401static void intel_lvds_prepare(struct drm_encoder *encoder)
402{
403 struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
404
405 /*
406 * Prior to Ironlake, we must disable the pipe if we want to adjust
407 * the panel fitter. However at all other times we can just reset
408 * the registers regardless.
409 */
410 if (!HAS_PCH_SPLIT(encoder->dev) && intel_lvds->pfit_dirty)
411 intel_lvds_disable(intel_lvds);
412}
413
414static void intel_lvds_commit(struct drm_encoder *encoder)
415{
416 struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
417
418 /* Always do a full power on as we do not know what state
419 * we were left in.
420 */
421 intel_lvds_enable(intel_lvds);
422}
423
424static void intel_lvds_mode_set(struct drm_encoder *encoder,
425 struct drm_display_mode *mode,
426 struct drm_display_mode *adjusted_mode)
427{
428 /*
429 * The LVDS pin pair will already have been turned on in the
430 * intel_crtc_mode_set since it has a large impact on the DPLL
431 * settings.
432 */
433}
434
435/**
436 * Detect the LVDS connection.
437 *
438 * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
439 * connected and closed means disconnected. We also send hotplug events as
440 * needed, using lid status notification from the input layer.
441 */
442static enum drm_connector_status
443intel_lvds_detect(struct drm_connector *connector, bool force)
444{
445 struct drm_device *dev = connector->dev;
446 enum drm_connector_status status;
447
448 status = intel_panel_detect(dev);
449 if (status != connector_status_unknown)
450 return status;
451
452 return connector_status_connected;
453}
454
455/**
456 * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
457 */
458static int intel_lvds_get_modes(struct drm_connector *connector)
459{
460 struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
461 struct drm_device *dev = connector->dev;
462 struct drm_display_mode *mode;
463
464 if (intel_lvds->edid)
465 return drm_add_edid_modes(connector, intel_lvds->edid);
466
467 mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
468 if (mode == NULL)
469 return 0;
470
471 drm_mode_probed_add(connector, mode);
472 return 1;
473}
474
475static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
476{
477 DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident);
478 return 1;
479}
480
481/* The GPU hangs up on these systems if modeset is performed on LID open */
482static const struct dmi_system_id intel_no_modeset_on_lid[] = {
483 {
484 .callback = intel_no_modeset_on_lid_dmi_callback,
485 .ident = "Toshiba Tecra A11",
486 .matches = {
487 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
488 DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
489 },
490 },
491
492 { } /* terminating entry */
493};
494
495/*
496 * Lid events. Note the use of 'modeset_on_lid':
497 * - we set it on lid close, and reset it on open
498 * - we use it as a "only once" bit (ie we ignore
499 * duplicate events where it was already properly
500 * set/reset)
501 * - the suspend/resume paths will also set it to
502 * zero, since they restore the mode ("lid open").
503 */
504static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
505 void *unused)
506{
507 struct drm_i915_private *dev_priv =
508 container_of(nb, struct drm_i915_private, lid_notifier);
509 struct drm_device *dev = dev_priv->dev;
510 struct drm_connector *connector = dev_priv->int_lvds_connector;
511
512 if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
513 return NOTIFY_OK;
514
515 /*
516 * check and update the status of LVDS connector after receiving
517 * the LID nofication event.
518 */
519 if (connector)
520 connector->status = connector->funcs->detect(connector,
521 false);
522
523 /* Don't force modeset on machines where it causes a GPU lockup */
524 if (dmi_check_system(intel_no_modeset_on_lid))
525 return NOTIFY_OK;
526 if (!acpi_lid_open()) {
527 dev_priv->modeset_on_lid = 1;
528 return NOTIFY_OK;
529 }
530
531 if (!dev_priv->modeset_on_lid)
532 return NOTIFY_OK;
533
534 dev_priv->modeset_on_lid = 0;
535
536 mutex_lock(&dev->mode_config.mutex);
537 drm_helper_resume_force_mode(dev);
538 mutex_unlock(&dev->mode_config.mutex);
539
540 return NOTIFY_OK;
541}
542
543/**
544 * intel_lvds_destroy - unregister and free LVDS structures
545 * @connector: connector to free
546 *
547 * Unregister the DDC bus for this connector then free the driver private
548 * structure.
549 */
550static void intel_lvds_destroy(struct drm_connector *connector)
551{
552 struct drm_device *dev = connector->dev;
553 struct drm_i915_private *dev_priv = dev->dev_private;
554
555 intel_panel_destroy_backlight(dev);
556
557 if (dev_priv->lid_notifier.notifier_call)
558 acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
559 drm_sysfs_connector_remove(connector);
560 drm_connector_cleanup(connector);
561 kfree(connector);
562}
563
564static int intel_lvds_set_property(struct drm_connector *connector,
565 struct drm_property *property,
566 uint64_t value)
567{
568 struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
569 struct drm_device *dev = connector->dev;
570
571 if (property == dev->mode_config.scaling_mode_property) {
572 struct drm_crtc *crtc = intel_lvds->base.base.crtc;
573
574 if (value == DRM_MODE_SCALE_NONE) {
575 DRM_DEBUG_KMS("no scaling not supported\n");
576 return -EINVAL;
577 }
578
579 if (intel_lvds->fitting_mode == value) {
580 /* the LVDS scaling property is not changed */
581 return 0;
582 }
583 intel_lvds->fitting_mode = value;
584 if (crtc && crtc->enabled) {
585 /*
586 * If the CRTC is enabled, the display will be changed
587 * according to the new panel fitting mode.
588 */
589 drm_crtc_helper_set_mode(crtc, &crtc->mode,
590 crtc->x, crtc->y, crtc->fb);
591 }
592 }
593
594 return 0;
595}
596
597static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
598 .dpms = intel_lvds_dpms,
599 .mode_fixup = intel_lvds_mode_fixup,
600 .prepare = intel_lvds_prepare,
601 .mode_set = intel_lvds_mode_set,
602 .commit = intel_lvds_commit,
603};
604
605static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
606 .get_modes = intel_lvds_get_modes,
607 .mode_valid = intel_lvds_mode_valid,
608 .best_encoder = intel_best_encoder,
609};
610
611static const struct drm_connector_funcs intel_lvds_connector_funcs = {
612 .dpms = drm_helper_connector_dpms,
613 .detect = intel_lvds_detect,
614 .fill_modes = drm_helper_probe_single_connector_modes,
615 .set_property = intel_lvds_set_property,
616 .destroy = intel_lvds_destroy,
617};
618
619static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
620 .destroy = intel_encoder_destroy,
621};
622
623static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
624{
625 DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
626 return 1;
627}
628
629/* These systems claim to have LVDS, but really don't */
630static const struct dmi_system_id intel_no_lvds[] = {
631 {
632 .callback = intel_no_lvds_dmi_callback,
633 .ident = "Apple Mac Mini (Core series)",
634 .matches = {
635 DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
636 DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
637 },
638 },
639 {
640 .callback = intel_no_lvds_dmi_callback,
641 .ident = "Apple Mac Mini (Core 2 series)",
642 .matches = {
643 DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
644 DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
645 },
646 },
647 {
648 .callback = intel_no_lvds_dmi_callback,
649 .ident = "MSI IM-945GSE-A",
650 .matches = {
651 DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
652 DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
653 },
654 },
655 {
656 .callback = intel_no_lvds_dmi_callback,
657 .ident = "Dell Studio Hybrid",
658 .matches = {
659 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
660 DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
661 },
662 },
663 {
664 .callback = intel_no_lvds_dmi_callback,
665 .ident = "Dell OptiPlex FX170",
666 .matches = {
667 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
668 DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex FX170"),
669 },
670 },
671 {
672 .callback = intel_no_lvds_dmi_callback,
673 .ident = "AOpen Mini PC",
674 .matches = {
675 DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
676 DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
677 },
678 },
679 {
680 .callback = intel_no_lvds_dmi_callback,
681 .ident = "AOpen Mini PC MP915",
682 .matches = {
683 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
684 DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
685 },
686 },
687 {
688 .callback = intel_no_lvds_dmi_callback,
689 .ident = "AOpen i915GMm-HFS",
690 .matches = {
691 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
692 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
693 },
694 },
695 {
696 .callback = intel_no_lvds_dmi_callback,
697 .ident = "Aopen i945GTt-VFA",
698 .matches = {
699 DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
700 },
701 },
702 {
703 .callback = intel_no_lvds_dmi_callback,
704 .ident = "Clientron U800",
705 .matches = {
706 DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
707 DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
708 },
709 },
710 {
711 .callback = intel_no_lvds_dmi_callback,
712 .ident = "Asus EeeBox PC EB1007",
713 .matches = {
714 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
715 DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
716 },
717 },
718
719 { } /* terminating entry */
720};
721
722/**
723 * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
724 * @dev: drm device
725 * @connector: LVDS connector
726 *
727 * Find the reduced downclock for LVDS in EDID.
728 */
729static void intel_find_lvds_downclock(struct drm_device *dev,
730 struct drm_display_mode *fixed_mode,
731 struct drm_connector *connector)
732{
733 struct drm_i915_private *dev_priv = dev->dev_private;
734 struct drm_display_mode *scan;
735 int temp_downclock;
736
737 temp_downclock = fixed_mode->clock;
738 list_for_each_entry(scan, &connector->probed_modes, head) {
739 /*
740 * If one mode has the same resolution with the fixed_panel
741 * mode while they have the different refresh rate, it means
742 * that the reduced downclock is found for the LVDS. In such
743 * case we can set the different FPx0/1 to dynamically select
744 * between low and high frequency.
745 */
746 if (scan->hdisplay == fixed_mode->hdisplay &&
747 scan->hsync_start == fixed_mode->hsync_start &&
748 scan->hsync_end == fixed_mode->hsync_end &&
749 scan->htotal == fixed_mode->htotal &&
750 scan->vdisplay == fixed_mode->vdisplay &&
751 scan->vsync_start == fixed_mode->vsync_start &&
752 scan->vsync_end == fixed_mode->vsync_end &&
753 scan->vtotal == fixed_mode->vtotal) {
754 if (scan->clock < temp_downclock) {
755 /*
756 * The downclock is already found. But we
757 * expect to find the lower downclock.
758 */
759 temp_downclock = scan->clock;
760 }
761 }
762 }
763 if (temp_downclock < fixed_mode->clock && i915_lvds_downclock) {
764 /* We found the downclock for LVDS. */
765 dev_priv->lvds_downclock_avail = 1;
766 dev_priv->lvds_downclock = temp_downclock;
767 DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
768 "Normal clock %dKhz, downclock %dKhz\n",
769 fixed_mode->clock, temp_downclock);
770 }
771}
772
773/*
774 * Enumerate the child dev array parsed from VBT to check whether
775 * the LVDS is present.
776 * If it is present, return 1.
777 * If it is not present, return false.
778 * If no child dev is parsed from VBT, it assumes that the LVDS is present.
779 */
780static bool lvds_is_present_in_vbt(struct drm_device *dev,
781 u8 *i2c_pin)
782{
783 struct drm_i915_private *dev_priv = dev->dev_private;
784 int i;
785
786 if (!dev_priv->child_dev_num)
787 return true;
788
789 for (i = 0; i < dev_priv->child_dev_num; i++) {
790 struct child_device_config *child = dev_priv->child_dev + i;
791
792 /* If the device type is not LFP, continue.
793 * We have to check both the new identifiers as well as the
794 * old for compatibility with some BIOSes.
795 */
796 if (child->device_type != DEVICE_TYPE_INT_LFP &&
797 child->device_type != DEVICE_TYPE_LFP)
798 continue;
799
800 if (child->i2c_pin)
801 *i2c_pin = child->i2c_pin;
802
803 /* However, we cannot trust the BIOS writers to populate
804 * the VBT correctly. Since LVDS requires additional
805 * information from AIM blocks, a non-zero addin offset is
806 * a good indicator that the LVDS is actually present.
807 */
808 if (child->addin_offset)
809 return true;
810
811 /* But even then some BIOS writers perform some black magic
812 * and instantiate the device without reference to any
813 * additional data. Trust that if the VBT was written into
814 * the OpRegion then they have validated the LVDS's existence.
815 */
816 if (dev_priv->opregion.vbt)
817 return true;
818 }
819
820 return false;
821}
822
823/**
824 * intel_lvds_init - setup LVDS connectors on this device
825 * @dev: drm device
826 *
827 * Create the connector, register the LVDS DDC bus, and try to figure out what
828 * modes we can display on the LVDS panel (if present).
829 */
830bool intel_lvds_init(struct drm_device *dev)
831{
832 struct drm_i915_private *dev_priv = dev->dev_private;
833 struct intel_lvds *intel_lvds;
834 struct intel_encoder *intel_encoder;
835 struct intel_connector *intel_connector;
836 struct drm_connector *connector;
837 struct drm_encoder *encoder;
838 struct drm_display_mode *scan; /* *modes, *bios_mode; */
839 struct drm_crtc *crtc;
840 u32 lvds;
841 int pipe;
842 u8 pin;
843
844 /* Skip init on machines we know falsely report LVDS */
845 if (dmi_check_system(intel_no_lvds))
846 return false;
847
848 pin = GMBUS_PORT_PANEL;
849 if (!lvds_is_present_in_vbt(dev, &pin)) {
850 DRM_DEBUG_KMS("LVDS is not present in VBT\n");
851 return false;
852 }
853
854 if (HAS_PCH_SPLIT(dev)) {
855 if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
856 return false;
857 if (dev_priv->edp.support) {
858 DRM_DEBUG_KMS("disable LVDS for eDP support\n");
859 return false;
860 }
861 }
862
863 intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
864 if (!intel_lvds) {
865 return false;
866 }
867
868 intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
869 if (!intel_connector) {
870 kfree(intel_lvds);
871 return false;
872 }
873
874 if (!HAS_PCH_SPLIT(dev)) {
875 intel_lvds->pfit_control = I915_READ(PFIT_CONTROL);
876 }
877
878 intel_encoder = &intel_lvds->base;
879 encoder = &intel_encoder->base;
880 connector = &intel_connector->base;
881 drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
882 DRM_MODE_CONNECTOR_LVDS);
883
884 drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs,
885 DRM_MODE_ENCODER_LVDS);
886
887 intel_connector_attach_encoder(intel_connector, intel_encoder);
888 intel_encoder->type = INTEL_OUTPUT_LVDS;
889
890 intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
891 intel_encoder->crtc_mask = (1 << 1);
892 if (INTEL_INFO(dev)->gen >= 5)
893 intel_encoder->crtc_mask |= (1 << 0);
894 drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
895 drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
896 connector->display_info.subpixel_order = SubPixelHorizontalRGB;
897 connector->interlace_allowed = false;
898 connector->doublescan_allowed = false;
899
900 /* create the scaling mode property */
901 drm_mode_create_scaling_mode_property(dev);
902 /*
903 * the initial panel fitting mode will be FULL_SCREEN.
904 */
905
906 drm_connector_attach_property(&intel_connector->base,
907 dev->mode_config.scaling_mode_property,
908 DRM_MODE_SCALE_ASPECT);
909 intel_lvds->fitting_mode = DRM_MODE_SCALE_ASPECT;
910 /*
911 * LVDS discovery:
912 * 1) check for EDID on DDC
913 * 2) check for VBT data
914 * 3) check to see if LVDS is already on
915 * if none of the above, no panel
916 * 4) make sure lid is open
917 * if closed, act like it's not there for now
918 */
919
920 /*
921 * Attempt to get the fixed panel mode from DDC. Assume that the
922 * preferred mode is the right one.
923 */
924 intel_lvds->edid = drm_get_edid(connector,
925 &dev_priv->gmbus[pin].adapter);
926 if (intel_lvds->edid) {
927 if (drm_add_edid_modes(connector,
928 intel_lvds->edid)) {
929 drm_mode_connector_update_edid_property(connector,
930 intel_lvds->edid);
931 } else {
932 kfree(intel_lvds->edid);
933 intel_lvds->edid = NULL;
934 }
935 }
936 if (!intel_lvds->edid) {
937 /* Didn't get an EDID, so
938 * Set wide sync ranges so we get all modes
939 * handed to valid_mode for checking
940 */
941 connector->display_info.min_vfreq = 0;
942 connector->display_info.max_vfreq = 200;
943 connector->display_info.min_hfreq = 0;
944 connector->display_info.max_hfreq = 200;
945 }
946
947 list_for_each_entry(scan, &connector->probed_modes, head) {
948 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
949 intel_lvds->fixed_mode =
950 drm_mode_duplicate(dev, scan);
951 intel_find_lvds_downclock(dev,
952 intel_lvds->fixed_mode,
953 connector);
954 goto out;
955 }
956 }
957
958 /* Failed to get EDID, what about VBT? */
959 if (dev_priv->lfp_lvds_vbt_mode) {
960 intel_lvds->fixed_mode =
961 drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
962 if (intel_lvds->fixed_mode) {
963 intel_lvds->fixed_mode->type |=
964 DRM_MODE_TYPE_PREFERRED;
965 goto out;
966 }
967 }
968
969 /*
970 * If we didn't get EDID, try checking if the panel is already turned
971 * on. If so, assume that whatever is currently programmed is the
972 * correct mode.
973 */
974
975 /* Ironlake: FIXME if still fail, not try pipe mode now */
976 if (HAS_PCH_SPLIT(dev))
977 goto failed;
978
979 lvds = I915_READ(LVDS);
980 pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
981 crtc = intel_get_crtc_for_pipe(dev, pipe);
982
983 if (crtc && (lvds & LVDS_PORT_EN)) {
984 intel_lvds->fixed_mode = intel_crtc_mode_get(dev, crtc);
985 if (intel_lvds->fixed_mode) {
986 intel_lvds->fixed_mode->type |=
987 DRM_MODE_TYPE_PREFERRED;
988 goto out;
989 }
990 }
991
992 /* If we still don't have a mode after all that, give up. */
993 if (!intel_lvds->fixed_mode)
994 goto failed;
995
996out:
997 if (HAS_PCH_SPLIT(dev)) {
998 u32 pwm;
999
1000 pipe = (I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT) ? 1 : 0;
1001
1002 /* make sure PWM is enabled and locked to the LVDS pipe */
1003 pwm = I915_READ(BLC_PWM_CPU_CTL2);
1004 if (pipe == 0 && (pwm & PWM_PIPE_B))
1005 I915_WRITE(BLC_PWM_CPU_CTL2, pwm & ~PWM_ENABLE);
1006 if (pipe)
1007 pwm |= PWM_PIPE_B;
1008 else
1009 pwm &= ~PWM_PIPE_B;
1010 I915_WRITE(BLC_PWM_CPU_CTL2, pwm | PWM_ENABLE);
1011
1012 pwm = I915_READ(BLC_PWM_PCH_CTL1);
1013 pwm |= PWM_PCH_ENABLE;
1014 I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
1015 /*
1016 * Unlock registers and just
1017 * leave them unlocked
1018 */
1019 I915_WRITE(PCH_PP_CONTROL,
1020 I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
1021 } else {
1022 /*
1023 * Unlock registers and just
1024 * leave them unlocked
1025 */
1026 I915_WRITE(PP_CONTROL,
1027 I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
1028 }
1029 dev_priv->lid_notifier.notifier_call = intel_lid_notify;
1030 if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
1031 DRM_DEBUG_KMS("lid notifier registration failed\n");
1032 dev_priv->lid_notifier.notifier_call = NULL;
1033 }
1034 /* keep the LVDS connector */
1035 dev_priv->int_lvds_connector = connector;
1036 drm_sysfs_connector_add(connector);
1037
1038 intel_panel_setup_backlight(dev);
1039
1040 return true;
1041
1042failed:
1043 DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
1044 drm_connector_cleanup(connector);
1045 drm_encoder_cleanup(encoder);
1046 kfree(intel_lvds);
1047 kfree(intel_connector);
1048 return false;
1049}
1/*
2 * Copyright © 2006-2007 Intel Corporation
3 * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining a
6 * copy of this software and associated documentation files (the "Software"),
7 * to deal in the Software without restriction, including without limitation
8 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
9 * and/or sell copies of the Software, and to permit persons to whom the
10 * Software is furnished to do so, subject to the following conditions:
11 *
12 * The above copyright notice and this permission notice (including the next
13 * paragraph) shall be included in all copies or substantial portions of the
14 * Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
21 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
22 * DEALINGS IN THE SOFTWARE.
23 *
24 * Authors:
25 * Eric Anholt <eric@anholt.net>
26 * Dave Airlie <airlied@linux.ie>
27 * Jesse Barnes <jesse.barnes@intel.com>
28 */
29
30#include <acpi/button.h>
31#include <linux/dmi.h>
32#include <linux/i2c.h>
33#include <linux/slab.h>
34#include <drm/drmP.h>
35#include <drm/drm_crtc.h>
36#include <drm/drm_edid.h>
37#include "intel_drv.h"
38#include <drm/i915_drm.h>
39#include "i915_drv.h"
40#include <linux/acpi.h>
41
42/* Private structure for the integrated LVDS support */
43struct intel_lvds_connector {
44 struct intel_connector base;
45
46 struct notifier_block lid_notifier;
47};
48
49struct intel_lvds_encoder {
50 struct intel_encoder base;
51
52 bool is_dual_link;
53 u32 reg;
54
55 struct intel_lvds_connector *attached_connector;
56};
57
58static struct intel_lvds_encoder *to_lvds_encoder(struct drm_encoder *encoder)
59{
60 return container_of(encoder, struct intel_lvds_encoder, base.base);
61}
62
63static struct intel_lvds_connector *to_lvds_connector(struct drm_connector *connector)
64{
65 return container_of(connector, struct intel_lvds_connector, base.base);
66}
67
68static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
69 enum pipe *pipe)
70{
71 struct drm_device *dev = encoder->base.dev;
72 struct drm_i915_private *dev_priv = dev->dev_private;
73 struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
74 u32 tmp;
75
76 tmp = I915_READ(lvds_encoder->reg);
77
78 if (!(tmp & LVDS_PORT_EN))
79 return false;
80
81 if (HAS_PCH_CPT(dev))
82 *pipe = PORT_TO_PIPE_CPT(tmp);
83 else
84 *pipe = PORT_TO_PIPE(tmp);
85
86 return true;
87}
88
89static void intel_lvds_get_config(struct intel_encoder *encoder,
90 struct intel_crtc_config *pipe_config)
91{
92 struct drm_device *dev = encoder->base.dev;
93 struct drm_i915_private *dev_priv = dev->dev_private;
94 u32 lvds_reg, tmp, flags = 0;
95 int dotclock;
96
97 if (HAS_PCH_SPLIT(dev))
98 lvds_reg = PCH_LVDS;
99 else
100 lvds_reg = LVDS;
101
102 tmp = I915_READ(lvds_reg);
103 if (tmp & LVDS_HSYNC_POLARITY)
104 flags |= DRM_MODE_FLAG_NHSYNC;
105 else
106 flags |= DRM_MODE_FLAG_PHSYNC;
107 if (tmp & LVDS_VSYNC_POLARITY)
108 flags |= DRM_MODE_FLAG_NVSYNC;
109 else
110 flags |= DRM_MODE_FLAG_PVSYNC;
111
112 pipe_config->adjusted_mode.flags |= flags;
113
114 /* gen2/3 store dither state in pfit control, needs to match */
115 if (INTEL_INFO(dev)->gen < 4) {
116 tmp = I915_READ(PFIT_CONTROL);
117
118 pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE;
119 }
120
121 dotclock = pipe_config->port_clock;
122
123 if (HAS_PCH_SPLIT(dev_priv->dev))
124 ironlake_check_encoder_dotclock(pipe_config, dotclock);
125
126 pipe_config->adjusted_mode.crtc_clock = dotclock;
127}
128
129/* The LVDS pin pair needs to be on before the DPLLs are enabled.
130 * This is an exception to the general rule that mode_set doesn't turn
131 * things on.
132 */
133static void intel_pre_enable_lvds(struct intel_encoder *encoder)
134{
135 struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
136 struct drm_device *dev = encoder->base.dev;
137 struct drm_i915_private *dev_priv = dev->dev_private;
138 struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
139 const struct drm_display_mode *adjusted_mode =
140 &crtc->config.adjusted_mode;
141 int pipe = crtc->pipe;
142 u32 temp;
143
144 if (HAS_PCH_SPLIT(dev)) {
145 assert_fdi_rx_pll_disabled(dev_priv, pipe);
146 assert_shared_dpll_disabled(dev_priv,
147 intel_crtc_to_shared_dpll(crtc));
148 } else {
149 assert_pll_disabled(dev_priv, pipe);
150 }
151
152 temp = I915_READ(lvds_encoder->reg);
153 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
154
155 if (HAS_PCH_CPT(dev)) {
156 temp &= ~PORT_TRANS_SEL_MASK;
157 temp |= PORT_TRANS_SEL_CPT(pipe);
158 } else {
159 if (pipe == 1) {
160 temp |= LVDS_PIPEB_SELECT;
161 } else {
162 temp &= ~LVDS_PIPEB_SELECT;
163 }
164 }
165
166 /* set the corresponsding LVDS_BORDER bit */
167 temp &= ~LVDS_BORDER_ENABLE;
168 temp |= crtc->config.gmch_pfit.lvds_border_bits;
169 /* Set the B0-B3 data pairs corresponding to whether we're going to
170 * set the DPLLs for dual-channel mode or not.
171 */
172 if (lvds_encoder->is_dual_link)
173 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
174 else
175 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
176
177 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
178 * appropriately here, but we need to look more thoroughly into how
179 * panels behave in the two modes.
180 */
181
182 /* Set the dithering flag on LVDS as needed, note that there is no
183 * special lvds dither control bit on pch-split platforms, dithering is
184 * only controlled through the PIPECONF reg. */
185 if (INTEL_INFO(dev)->gen == 4) {
186 /* Bspec wording suggests that LVDS port dithering only exists
187 * for 18bpp panels. */
188 if (crtc->config.dither && crtc->config.pipe_bpp == 18)
189 temp |= LVDS_ENABLE_DITHER;
190 else
191 temp &= ~LVDS_ENABLE_DITHER;
192 }
193 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
194 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
195 temp |= LVDS_HSYNC_POLARITY;
196 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
197 temp |= LVDS_VSYNC_POLARITY;
198
199 I915_WRITE(lvds_encoder->reg, temp);
200}
201
202/**
203 * Sets the power state for the panel.
204 */
205static void intel_enable_lvds(struct intel_encoder *encoder)
206{
207 struct drm_device *dev = encoder->base.dev;
208 struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
209 struct intel_connector *intel_connector =
210 &lvds_encoder->attached_connector->base;
211 struct drm_i915_private *dev_priv = dev->dev_private;
212 u32 ctl_reg, stat_reg;
213
214 if (HAS_PCH_SPLIT(dev)) {
215 ctl_reg = PCH_PP_CONTROL;
216 stat_reg = PCH_PP_STATUS;
217 } else {
218 ctl_reg = PP_CONTROL;
219 stat_reg = PP_STATUS;
220 }
221
222 I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN);
223
224 I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
225 POSTING_READ(lvds_encoder->reg);
226 if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
227 DRM_ERROR("timed out waiting for panel to power on\n");
228
229 intel_panel_enable_backlight(intel_connector);
230}
231
232static void intel_disable_lvds(struct intel_encoder *encoder)
233{
234 struct drm_device *dev = encoder->base.dev;
235 struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
236 struct intel_connector *intel_connector =
237 &lvds_encoder->attached_connector->base;
238 struct drm_i915_private *dev_priv = dev->dev_private;
239 u32 ctl_reg, stat_reg;
240
241 if (HAS_PCH_SPLIT(dev)) {
242 ctl_reg = PCH_PP_CONTROL;
243 stat_reg = PCH_PP_STATUS;
244 } else {
245 ctl_reg = PP_CONTROL;
246 stat_reg = PP_STATUS;
247 }
248
249 intel_panel_disable_backlight(intel_connector);
250
251 I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
252 if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000))
253 DRM_ERROR("timed out waiting for panel to power off\n");
254
255 I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN);
256 POSTING_READ(lvds_encoder->reg);
257}
258
259static enum drm_mode_status
260intel_lvds_mode_valid(struct drm_connector *connector,
261 struct drm_display_mode *mode)
262{
263 struct intel_connector *intel_connector = to_intel_connector(connector);
264 struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
265
266 if (mode->hdisplay > fixed_mode->hdisplay)
267 return MODE_PANEL;
268 if (mode->vdisplay > fixed_mode->vdisplay)
269 return MODE_PANEL;
270
271 return MODE_OK;
272}
273
274static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
275 struct intel_crtc_config *pipe_config)
276{
277 struct drm_device *dev = intel_encoder->base.dev;
278 struct drm_i915_private *dev_priv = dev->dev_private;
279 struct intel_lvds_encoder *lvds_encoder =
280 to_lvds_encoder(&intel_encoder->base);
281 struct intel_connector *intel_connector =
282 &lvds_encoder->attached_connector->base;
283 struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
284 struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
285 unsigned int lvds_bpp;
286
287 /* Should never happen!! */
288 if (INTEL_INFO(dev)->gen < 4 && intel_crtc->pipe == 0) {
289 DRM_ERROR("Can't support LVDS on pipe A\n");
290 return false;
291 }
292
293 if ((I915_READ(lvds_encoder->reg) & LVDS_A3_POWER_MASK) ==
294 LVDS_A3_POWER_UP)
295 lvds_bpp = 8*3;
296 else
297 lvds_bpp = 6*3;
298
299 if (lvds_bpp != pipe_config->pipe_bpp && !pipe_config->bw_constrained) {
300 DRM_DEBUG_KMS("forcing display bpp (was %d) to LVDS (%d)\n",
301 pipe_config->pipe_bpp, lvds_bpp);
302 pipe_config->pipe_bpp = lvds_bpp;
303 }
304
305 /*
306 * We have timings from the BIOS for the panel, put them in
307 * to the adjusted mode. The CRTC will be set up for this mode,
308 * with the panel scaling set up to source from the H/VDisplay
309 * of the original mode.
310 */
311 intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
312 adjusted_mode);
313
314 if (HAS_PCH_SPLIT(dev)) {
315 pipe_config->has_pch_encoder = true;
316
317 intel_pch_panel_fitting(intel_crtc, pipe_config,
318 intel_connector->panel.fitting_mode);
319 } else {
320 intel_gmch_panel_fitting(intel_crtc, pipe_config,
321 intel_connector->panel.fitting_mode);
322
323 }
324
325 /*
326 * XXX: It would be nice to support lower refresh rates on the
327 * panels to reduce power consumption, and perhaps match the
328 * user's requested refresh rate.
329 */
330
331 return true;
332}
333
334static void intel_lvds_mode_set(struct intel_encoder *encoder)
335{
336 /*
337 * We don't do anything here, the LVDS port is fully set up in the pre
338 * enable hook - the ordering constraints for enabling the lvds port vs.
339 * enabling the display pll are too strict.
340 */
341}
342
343/**
344 * Detect the LVDS connection.
345 *
346 * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
347 * connected and closed means disconnected. We also send hotplug events as
348 * needed, using lid status notification from the input layer.
349 */
350static enum drm_connector_status
351intel_lvds_detect(struct drm_connector *connector, bool force)
352{
353 struct drm_device *dev = connector->dev;
354 enum drm_connector_status status;
355
356 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
357 connector->base.id, drm_get_connector_name(connector));
358
359 status = intel_panel_detect(dev);
360 if (status != connector_status_unknown)
361 return status;
362
363 return connector_status_connected;
364}
365
366/**
367 * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
368 */
369static int intel_lvds_get_modes(struct drm_connector *connector)
370{
371 struct intel_lvds_connector *lvds_connector = to_lvds_connector(connector);
372 struct drm_device *dev = connector->dev;
373 struct drm_display_mode *mode;
374
375 /* use cached edid if we have one */
376 if (!IS_ERR_OR_NULL(lvds_connector->base.edid))
377 return drm_add_edid_modes(connector, lvds_connector->base.edid);
378
379 mode = drm_mode_duplicate(dev, lvds_connector->base.panel.fixed_mode);
380 if (mode == NULL)
381 return 0;
382
383 drm_mode_probed_add(connector, mode);
384 return 1;
385}
386
387static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
388{
389 DRM_INFO("Skipping forced modeset for %s\n", id->ident);
390 return 1;
391}
392
393/* The GPU hangs up on these systems if modeset is performed on LID open */
394static const struct dmi_system_id intel_no_modeset_on_lid[] = {
395 {
396 .callback = intel_no_modeset_on_lid_dmi_callback,
397 .ident = "Toshiba Tecra A11",
398 .matches = {
399 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
400 DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
401 },
402 },
403
404 { } /* terminating entry */
405};
406
407/*
408 * Lid events. Note the use of 'modeset':
409 * - we set it to MODESET_ON_LID_OPEN on lid close,
410 * and set it to MODESET_DONE on open
411 * - we use it as a "only once" bit (ie we ignore
412 * duplicate events where it was already properly set)
413 * - the suspend/resume paths will set it to
414 * MODESET_SUSPENDED and ignore the lid open event,
415 * because they restore the mode ("lid open").
416 */
417static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
418 void *unused)
419{
420 struct intel_lvds_connector *lvds_connector =
421 container_of(nb, struct intel_lvds_connector, lid_notifier);
422 struct drm_connector *connector = &lvds_connector->base.base;
423 struct drm_device *dev = connector->dev;
424 struct drm_i915_private *dev_priv = dev->dev_private;
425
426 if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
427 return NOTIFY_OK;
428
429 mutex_lock(&dev_priv->modeset_restore_lock);
430 if (dev_priv->modeset_restore == MODESET_SUSPENDED)
431 goto exit;
432 /*
433 * check and update the status of LVDS connector after receiving
434 * the LID nofication event.
435 */
436 connector->status = connector->funcs->detect(connector, false);
437
438 /* Don't force modeset on machines where it causes a GPU lockup */
439 if (dmi_check_system(intel_no_modeset_on_lid))
440 goto exit;
441 if (!acpi_lid_open()) {
442 /* do modeset on next lid open event */
443 dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
444 goto exit;
445 }
446
447 if (dev_priv->modeset_restore == MODESET_DONE)
448 goto exit;
449
450 /*
451 * Some old platform's BIOS love to wreak havoc while the lid is closed.
452 * We try to detect this here and undo any damage. The split for PCH
453 * platforms is rather conservative and a bit arbitrary expect that on
454 * those platforms VGA disabling requires actual legacy VGA I/O access,
455 * and as part of the cleanup in the hw state restore we also redisable
456 * the vga plane.
457 */
458 if (!HAS_PCH_SPLIT(dev)) {
459 drm_modeset_lock_all(dev);
460 intel_modeset_setup_hw_state(dev, true);
461 drm_modeset_unlock_all(dev);
462 }
463
464 dev_priv->modeset_restore = MODESET_DONE;
465
466exit:
467 mutex_unlock(&dev_priv->modeset_restore_lock);
468 return NOTIFY_OK;
469}
470
471/**
472 * intel_lvds_destroy - unregister and free LVDS structures
473 * @connector: connector to free
474 *
475 * Unregister the DDC bus for this connector then free the driver private
476 * structure.
477 */
478static void intel_lvds_destroy(struct drm_connector *connector)
479{
480 struct intel_lvds_connector *lvds_connector =
481 to_lvds_connector(connector);
482
483 if (lvds_connector->lid_notifier.notifier_call)
484 acpi_lid_notifier_unregister(&lvds_connector->lid_notifier);
485
486 if (!IS_ERR_OR_NULL(lvds_connector->base.edid))
487 kfree(lvds_connector->base.edid);
488
489 intel_panel_fini(&lvds_connector->base.panel);
490
491 drm_connector_cleanup(connector);
492 kfree(connector);
493}
494
495static int intel_lvds_set_property(struct drm_connector *connector,
496 struct drm_property *property,
497 uint64_t value)
498{
499 struct intel_connector *intel_connector = to_intel_connector(connector);
500 struct drm_device *dev = connector->dev;
501
502 if (property == dev->mode_config.scaling_mode_property) {
503 struct drm_crtc *crtc;
504
505 if (value == DRM_MODE_SCALE_NONE) {
506 DRM_DEBUG_KMS("no scaling not supported\n");
507 return -EINVAL;
508 }
509
510 if (intel_connector->panel.fitting_mode == value) {
511 /* the LVDS scaling property is not changed */
512 return 0;
513 }
514 intel_connector->panel.fitting_mode = value;
515
516 crtc = intel_attached_encoder(connector)->base.crtc;
517 if (crtc && crtc->enabled) {
518 /*
519 * If the CRTC is enabled, the display will be changed
520 * according to the new panel fitting mode.
521 */
522 intel_crtc_restore_mode(crtc);
523 }
524 }
525
526 return 0;
527}
528
529static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
530 .get_modes = intel_lvds_get_modes,
531 .mode_valid = intel_lvds_mode_valid,
532 .best_encoder = intel_best_encoder,
533};
534
535static const struct drm_connector_funcs intel_lvds_connector_funcs = {
536 .dpms = intel_connector_dpms,
537 .detect = intel_lvds_detect,
538 .fill_modes = drm_helper_probe_single_connector_modes,
539 .set_property = intel_lvds_set_property,
540 .destroy = intel_lvds_destroy,
541};
542
543static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
544 .destroy = intel_encoder_destroy,
545};
546
547static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
548{
549 DRM_INFO("Skipping LVDS initialization for %s\n", id->ident);
550 return 1;
551}
552
553/* These systems claim to have LVDS, but really don't */
554static const struct dmi_system_id intel_no_lvds[] = {
555 {
556 .callback = intel_no_lvds_dmi_callback,
557 .ident = "Apple Mac Mini (Core series)",
558 .matches = {
559 DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
560 DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
561 },
562 },
563 {
564 .callback = intel_no_lvds_dmi_callback,
565 .ident = "Apple Mac Mini (Core 2 series)",
566 .matches = {
567 DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
568 DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
569 },
570 },
571 {
572 .callback = intel_no_lvds_dmi_callback,
573 .ident = "MSI IM-945GSE-A",
574 .matches = {
575 DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
576 DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
577 },
578 },
579 {
580 .callback = intel_no_lvds_dmi_callback,
581 .ident = "Dell Studio Hybrid",
582 .matches = {
583 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
584 DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
585 },
586 },
587 {
588 .callback = intel_no_lvds_dmi_callback,
589 .ident = "Dell OptiPlex FX170",
590 .matches = {
591 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
592 DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex FX170"),
593 },
594 },
595 {
596 .callback = intel_no_lvds_dmi_callback,
597 .ident = "AOpen Mini PC",
598 .matches = {
599 DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
600 DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
601 },
602 },
603 {
604 .callback = intel_no_lvds_dmi_callback,
605 .ident = "AOpen Mini PC MP915",
606 .matches = {
607 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
608 DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
609 },
610 },
611 {
612 .callback = intel_no_lvds_dmi_callback,
613 .ident = "AOpen i915GMm-HFS",
614 .matches = {
615 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
616 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
617 },
618 },
619 {
620 .callback = intel_no_lvds_dmi_callback,
621 .ident = "AOpen i45GMx-I",
622 .matches = {
623 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
624 DMI_MATCH(DMI_BOARD_NAME, "i45GMx-I"),
625 },
626 },
627 {
628 .callback = intel_no_lvds_dmi_callback,
629 .ident = "Aopen i945GTt-VFA",
630 .matches = {
631 DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
632 },
633 },
634 {
635 .callback = intel_no_lvds_dmi_callback,
636 .ident = "Clientron U800",
637 .matches = {
638 DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
639 DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
640 },
641 },
642 {
643 .callback = intel_no_lvds_dmi_callback,
644 .ident = "Clientron E830",
645 .matches = {
646 DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
647 DMI_MATCH(DMI_PRODUCT_NAME, "E830"),
648 },
649 },
650 {
651 .callback = intel_no_lvds_dmi_callback,
652 .ident = "Asus EeeBox PC EB1007",
653 .matches = {
654 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
655 DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
656 },
657 },
658 {
659 .callback = intel_no_lvds_dmi_callback,
660 .ident = "Asus AT5NM10T-I",
661 .matches = {
662 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
663 DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"),
664 },
665 },
666 {
667 .callback = intel_no_lvds_dmi_callback,
668 .ident = "Hewlett-Packard HP t5740",
669 .matches = {
670 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
671 DMI_MATCH(DMI_PRODUCT_NAME, " t5740"),
672 },
673 },
674 {
675 .callback = intel_no_lvds_dmi_callback,
676 .ident = "Hewlett-Packard t5745",
677 .matches = {
678 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
679 DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"),
680 },
681 },
682 {
683 .callback = intel_no_lvds_dmi_callback,
684 .ident = "Hewlett-Packard st5747",
685 .matches = {
686 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
687 DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"),
688 },
689 },
690 {
691 .callback = intel_no_lvds_dmi_callback,
692 .ident = "MSI Wind Box DC500",
693 .matches = {
694 DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
695 DMI_MATCH(DMI_BOARD_NAME, "MS-7469"),
696 },
697 },
698 {
699 .callback = intel_no_lvds_dmi_callback,
700 .ident = "Gigabyte GA-D525TUD",
701 .matches = {
702 DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
703 DMI_MATCH(DMI_BOARD_NAME, "D525TUD"),
704 },
705 },
706 {
707 .callback = intel_no_lvds_dmi_callback,
708 .ident = "Supermicro X7SPA-H",
709 .matches = {
710 DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
711 DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"),
712 },
713 },
714 {
715 .callback = intel_no_lvds_dmi_callback,
716 .ident = "Fujitsu Esprimo Q900",
717 .matches = {
718 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
719 DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Q900"),
720 },
721 },
722 {
723 .callback = intel_no_lvds_dmi_callback,
724 .ident = "Intel D410PT",
725 .matches = {
726 DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
727 DMI_MATCH(DMI_BOARD_NAME, "D410PT"),
728 },
729 },
730 {
731 .callback = intel_no_lvds_dmi_callback,
732 .ident = "Intel D425KT",
733 .matches = {
734 DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
735 DMI_EXACT_MATCH(DMI_BOARD_NAME, "D425KT"),
736 },
737 },
738 {
739 .callback = intel_no_lvds_dmi_callback,
740 .ident = "Intel D510MO",
741 .matches = {
742 DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
743 DMI_EXACT_MATCH(DMI_BOARD_NAME, "D510MO"),
744 },
745 },
746 {
747 .callback = intel_no_lvds_dmi_callback,
748 .ident = "Intel D525MW",
749 .matches = {
750 DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
751 DMI_EXACT_MATCH(DMI_BOARD_NAME, "D525MW"),
752 },
753 },
754
755 { } /* terminating entry */
756};
757
758/*
759 * Enumerate the child dev array parsed from VBT to check whether
760 * the LVDS is present.
761 * If it is present, return 1.
762 * If it is not present, return false.
763 * If no child dev is parsed from VBT, it assumes that the LVDS is present.
764 */
765static bool lvds_is_present_in_vbt(struct drm_device *dev,
766 u8 *i2c_pin)
767{
768 struct drm_i915_private *dev_priv = dev->dev_private;
769 int i;
770
771 if (!dev_priv->vbt.child_dev_num)
772 return true;
773
774 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
775 union child_device_config *uchild = dev_priv->vbt.child_dev + i;
776 struct old_child_dev_config *child = &uchild->old;
777
778 /* If the device type is not LFP, continue.
779 * We have to check both the new identifiers as well as the
780 * old for compatibility with some BIOSes.
781 */
782 if (child->device_type != DEVICE_TYPE_INT_LFP &&
783 child->device_type != DEVICE_TYPE_LFP)
784 continue;
785
786 if (intel_gmbus_is_port_valid(child->i2c_pin))
787 *i2c_pin = child->i2c_pin;
788
789 /* However, we cannot trust the BIOS writers to populate
790 * the VBT correctly. Since LVDS requires additional
791 * information from AIM blocks, a non-zero addin offset is
792 * a good indicator that the LVDS is actually present.
793 */
794 if (child->addin_offset)
795 return true;
796
797 /* But even then some BIOS writers perform some black magic
798 * and instantiate the device without reference to any
799 * additional data. Trust that if the VBT was written into
800 * the OpRegion then they have validated the LVDS's existence.
801 */
802 if (dev_priv->opregion.vbt)
803 return true;
804 }
805
806 return false;
807}
808
809static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
810{
811 DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
812 return 1;
813}
814
815static const struct dmi_system_id intel_dual_link_lvds[] = {
816 {
817 .callback = intel_dual_link_lvds_callback,
818 .ident = "Apple MacBook Pro (Core i5/i7 Series)",
819 .matches = {
820 DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
821 DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
822 },
823 },
824 { } /* terminating entry */
825};
826
827bool intel_is_dual_link_lvds(struct drm_device *dev)
828{
829 struct intel_encoder *encoder;
830 struct intel_lvds_encoder *lvds_encoder;
831
832 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
833 base.head) {
834 if (encoder->type == INTEL_OUTPUT_LVDS) {
835 lvds_encoder = to_lvds_encoder(&encoder->base);
836
837 return lvds_encoder->is_dual_link;
838 }
839 }
840
841 return false;
842}
843
844static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
845{
846 struct drm_device *dev = lvds_encoder->base.base.dev;
847 unsigned int val;
848 struct drm_i915_private *dev_priv = dev->dev_private;
849
850 /* use the module option value if specified */
851 if (i915.lvds_channel_mode > 0)
852 return i915.lvds_channel_mode == 2;
853
854 if (dmi_check_system(intel_dual_link_lvds))
855 return true;
856
857 /* BIOS should set the proper LVDS register value at boot, but
858 * in reality, it doesn't set the value when the lid is closed;
859 * we need to check "the value to be set" in VBT when LVDS
860 * register is uninitialized.
861 */
862 val = I915_READ(lvds_encoder->reg);
863 if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
864 val = dev_priv->vbt.bios_lvds_val;
865
866 return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
867}
868
869static bool intel_lvds_supported(struct drm_device *dev)
870{
871 /* With the introduction of the PCH we gained a dedicated
872 * LVDS presence pin, use it. */
873 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
874 return true;
875
876 /* Otherwise LVDS was only attached to mobile products,
877 * except for the inglorious 830gm */
878 if (INTEL_INFO(dev)->gen <= 4 && IS_MOBILE(dev) && !IS_I830(dev))
879 return true;
880
881 return false;
882}
883
884/**
885 * intel_lvds_init - setup LVDS connectors on this device
886 * @dev: drm device
887 *
888 * Create the connector, register the LVDS DDC bus, and try to figure out what
889 * modes we can display on the LVDS panel (if present).
890 */
891void intel_lvds_init(struct drm_device *dev)
892{
893 struct drm_i915_private *dev_priv = dev->dev_private;
894 struct intel_lvds_encoder *lvds_encoder;
895 struct intel_encoder *intel_encoder;
896 struct intel_lvds_connector *lvds_connector;
897 struct intel_connector *intel_connector;
898 struct drm_connector *connector;
899 struct drm_encoder *encoder;
900 struct drm_display_mode *scan; /* *modes, *bios_mode; */
901 struct drm_display_mode *fixed_mode = NULL;
902 struct drm_display_mode *downclock_mode = NULL;
903 struct edid *edid;
904 struct drm_crtc *crtc;
905 u32 lvds;
906 int pipe;
907 u8 pin;
908
909 if (!intel_lvds_supported(dev))
910 return;
911
912 /* Skip init on machines we know falsely report LVDS */
913 if (dmi_check_system(intel_no_lvds))
914 return;
915
916 pin = GMBUS_PORT_PANEL;
917 if (!lvds_is_present_in_vbt(dev, &pin)) {
918 DRM_DEBUG_KMS("LVDS is not present in VBT\n");
919 return;
920 }
921
922 if (HAS_PCH_SPLIT(dev)) {
923 if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
924 return;
925 if (dev_priv->vbt.edp_support) {
926 DRM_DEBUG_KMS("disable LVDS for eDP support\n");
927 return;
928 }
929 }
930
931 lvds_encoder = kzalloc(sizeof(*lvds_encoder), GFP_KERNEL);
932 if (!lvds_encoder)
933 return;
934
935 lvds_connector = kzalloc(sizeof(*lvds_connector), GFP_KERNEL);
936 if (!lvds_connector) {
937 kfree(lvds_encoder);
938 return;
939 }
940
941 lvds_encoder->attached_connector = lvds_connector;
942
943 intel_encoder = &lvds_encoder->base;
944 encoder = &intel_encoder->base;
945 intel_connector = &lvds_connector->base;
946 connector = &intel_connector->base;
947 drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
948 DRM_MODE_CONNECTOR_LVDS);
949
950 drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs,
951 DRM_MODE_ENCODER_LVDS);
952
953 intel_encoder->enable = intel_enable_lvds;
954 intel_encoder->pre_enable = intel_pre_enable_lvds;
955 intel_encoder->compute_config = intel_lvds_compute_config;
956 intel_encoder->mode_set = intel_lvds_mode_set;
957 intel_encoder->disable = intel_disable_lvds;
958 intel_encoder->get_hw_state = intel_lvds_get_hw_state;
959 intel_encoder->get_config = intel_lvds_get_config;
960 intel_connector->get_hw_state = intel_connector_get_hw_state;
961 intel_connector->unregister = intel_connector_unregister;
962
963 intel_connector_attach_encoder(intel_connector, intel_encoder);
964 intel_encoder->type = INTEL_OUTPUT_LVDS;
965
966 intel_encoder->cloneable = 0;
967 if (HAS_PCH_SPLIT(dev))
968 intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
969 else if (IS_GEN4(dev))
970 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
971 else
972 intel_encoder->crtc_mask = (1 << 1);
973
974 drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
975 connector->display_info.subpixel_order = SubPixelHorizontalRGB;
976 connector->interlace_allowed = false;
977 connector->doublescan_allowed = false;
978
979 if (HAS_PCH_SPLIT(dev)) {
980 lvds_encoder->reg = PCH_LVDS;
981 } else {
982 lvds_encoder->reg = LVDS;
983 }
984
985 /* create the scaling mode property */
986 drm_mode_create_scaling_mode_property(dev);
987 drm_object_attach_property(&connector->base,
988 dev->mode_config.scaling_mode_property,
989 DRM_MODE_SCALE_ASPECT);
990 intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
991 /*
992 * LVDS discovery:
993 * 1) check for EDID on DDC
994 * 2) check for VBT data
995 * 3) check to see if LVDS is already on
996 * if none of the above, no panel
997 * 4) make sure lid is open
998 * if closed, act like it's not there for now
999 */
1000
1001 /*
1002 * Attempt to get the fixed panel mode from DDC. Assume that the
1003 * preferred mode is the right one.
1004 */
1005 mutex_lock(&dev->mode_config.mutex);
1006 edid = drm_get_edid(connector, intel_gmbus_get_adapter(dev_priv, pin));
1007 if (edid) {
1008 if (drm_add_edid_modes(connector, edid)) {
1009 drm_mode_connector_update_edid_property(connector,
1010 edid);
1011 } else {
1012 kfree(edid);
1013 edid = ERR_PTR(-EINVAL);
1014 }
1015 } else {
1016 edid = ERR_PTR(-ENOENT);
1017 }
1018 lvds_connector->base.edid = edid;
1019
1020 if (IS_ERR_OR_NULL(edid)) {
1021 /* Didn't get an EDID, so
1022 * Set wide sync ranges so we get all modes
1023 * handed to valid_mode for checking
1024 */
1025 connector->display_info.min_vfreq = 0;
1026 connector->display_info.max_vfreq = 200;
1027 connector->display_info.min_hfreq = 0;
1028 connector->display_info.max_hfreq = 200;
1029 }
1030
1031 list_for_each_entry(scan, &connector->probed_modes, head) {
1032 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
1033 DRM_DEBUG_KMS("using preferred mode from EDID: ");
1034 drm_mode_debug_printmodeline(scan);
1035
1036 fixed_mode = drm_mode_duplicate(dev, scan);
1037 if (fixed_mode) {
1038 downclock_mode =
1039 intel_find_panel_downclock(dev,
1040 fixed_mode, connector);
1041 if (downclock_mode != NULL &&
1042 i915.lvds_downclock) {
1043 /* We found the downclock for LVDS. */
1044 dev_priv->lvds_downclock_avail = true;
1045 dev_priv->lvds_downclock =
1046 downclock_mode->clock;
1047 DRM_DEBUG_KMS("LVDS downclock is found"
1048 " in EDID. Normal clock %dKhz, "
1049 "downclock %dKhz\n",
1050 fixed_mode->clock,
1051 dev_priv->lvds_downclock);
1052 }
1053 goto out;
1054 }
1055 }
1056 }
1057
1058 /* Failed to get EDID, what about VBT? */
1059 if (dev_priv->vbt.lfp_lvds_vbt_mode) {
1060 DRM_DEBUG_KMS("using mode from VBT: ");
1061 drm_mode_debug_printmodeline(dev_priv->vbt.lfp_lvds_vbt_mode);
1062
1063 fixed_mode = drm_mode_duplicate(dev, dev_priv->vbt.lfp_lvds_vbt_mode);
1064 if (fixed_mode) {
1065 fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
1066 goto out;
1067 }
1068 }
1069
1070 /*
1071 * If we didn't get EDID, try checking if the panel is already turned
1072 * on. If so, assume that whatever is currently programmed is the
1073 * correct mode.
1074 */
1075
1076 /* Ironlake: FIXME if still fail, not try pipe mode now */
1077 if (HAS_PCH_SPLIT(dev))
1078 goto failed;
1079
1080 lvds = I915_READ(LVDS);
1081 pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
1082 crtc = intel_get_crtc_for_pipe(dev, pipe);
1083
1084 if (crtc && (lvds & LVDS_PORT_EN)) {
1085 fixed_mode = intel_crtc_mode_get(dev, crtc);
1086 if (fixed_mode) {
1087 DRM_DEBUG_KMS("using current (BIOS) mode: ");
1088 drm_mode_debug_printmodeline(fixed_mode);
1089 fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
1090 goto out;
1091 }
1092 }
1093
1094 /* If we still don't have a mode after all that, give up. */
1095 if (!fixed_mode)
1096 goto failed;
1097
1098out:
1099 mutex_unlock(&dev->mode_config.mutex);
1100
1101 lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
1102 DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
1103 lvds_encoder->is_dual_link ? "dual" : "single");
1104
1105 /*
1106 * Unlock registers and just
1107 * leave them unlocked
1108 */
1109 if (HAS_PCH_SPLIT(dev)) {
1110 I915_WRITE(PCH_PP_CONTROL,
1111 I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
1112 } else {
1113 I915_WRITE(PP_CONTROL,
1114 I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
1115 }
1116 lvds_connector->lid_notifier.notifier_call = intel_lid_notify;
1117 if (acpi_lid_notifier_register(&lvds_connector->lid_notifier)) {
1118 DRM_DEBUG_KMS("lid notifier registration failed\n");
1119 lvds_connector->lid_notifier.notifier_call = NULL;
1120 }
1121 drm_sysfs_connector_add(connector);
1122
1123 intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
1124 intel_panel_setup_backlight(connector);
1125
1126 return;
1127
1128failed:
1129 mutex_unlock(&dev->mode_config.mutex);
1130
1131 DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
1132 drm_connector_cleanup(connector);
1133 drm_encoder_cleanup(encoder);
1134 kfree(lvds_encoder);
1135 kfree(lvds_connector);
1136 return;
1137}