Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 | // SPDX-License-Identifier: GPL-2.0-only // Copyright (c) 2018-2020, Intel Corporation // // sof-wm8804.c - ASoC machine driver for Up and Up2 board // based on WM8804/Hifiberry Digi+ #include <linux/acpi.h> #include <linux/dmi.h> #include <linux/gpio/consumer.h> #include <linux/gpio/machine.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/soc-acpi.h> #include "../../codecs/wm8804.h" struct sof_card_private { struct gpio_desc *gpio_44; struct gpio_desc *gpio_48; int sample_rate; }; #define SOF_WM8804_UP2_QUIRK BIT(0) static unsigned long sof_wm8804_quirk; static int sof_wm8804_quirk_cb(const struct dmi_system_id *id) { sof_wm8804_quirk = (unsigned long)id->driver_data; return 1; } static const struct dmi_system_id sof_wm8804_quirk_table[] = { { .callback = sof_wm8804_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "AAEON"), DMI_MATCH(DMI_PRODUCT_NAME, "UP-APL01"), }, .driver_data = (void *)SOF_WM8804_UP2_QUIRK, }, {} }; static int sof_wm8804_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card); struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0); struct snd_soc_component *codec = codec_dai->component; const int sysclk = 27000000; /* This is fixed on this board */ int samplerate; long mclk_freq; int mclk_div; int sampling_freq; bool clk_44; int ret; samplerate = params_rate(params); if (samplerate == ctx->sample_rate) return 0; ctx->sample_rate = 0; if (samplerate <= 96000) { mclk_freq = samplerate * 256; mclk_div = WM8804_MCLKDIV_256FS; } else { mclk_freq = samplerate * 128; mclk_div = WM8804_MCLKDIV_128FS; } switch (samplerate) { case 32000: sampling_freq = 0x03; break; case 44100: sampling_freq = 0x00; break; case 48000: sampling_freq = 0x02; break; case 88200: sampling_freq = 0x08; break; case 96000: sampling_freq = 0x0a; break; case 176400: sampling_freq = 0x0c; break; case 192000: sampling_freq = 0x0e; break; default: dev_err(rtd->card->dev, "unsupported samplerate %d\n", samplerate); return -EINVAL; } if (samplerate % 16000) clk_44 = true; /* use 44.1 kHz root frequency */ else clk_44 = false; if (!(IS_ERR_OR_NULL(ctx->gpio_44) || IS_ERR_OR_NULL(ctx->gpio_48))) { /* * ensure both GPIOs are LOW first, then drive the * relevant one to HIGH */ if (clk_44) { gpiod_set_value_cansleep(ctx->gpio_48, !clk_44); gpiod_set_value_cansleep(ctx->gpio_44, clk_44); } else { gpiod_set_value_cansleep(ctx->gpio_44, clk_44); gpiod_set_value_cansleep(ctx->gpio_48, !clk_44); } } snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ret = snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); if (ret < 0) { dev_err(rtd->card->dev, "Failed to set WM8804 PLL\n"); return ret; } ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, sysclk, SND_SOC_CLOCK_OUT); if (ret < 0) { dev_err(rtd->card->dev, "Failed to set WM8804 SYSCLK: %d\n", ret); return ret; } /* set sampling frequency status bits */ snd_soc_component_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ctx->sample_rate = samplerate; return 0; } /* machine stream operations */ static struct snd_soc_ops sof_wm8804_ops = { .hw_params = sof_wm8804_hw_params, }; SND_SOC_DAILINK_DEF(ssp5_pin, DAILINK_COMP_ARRAY(COMP_CPU("SSP5 Pin"))); SND_SOC_DAILINK_DEF(ssp5_codec, DAILINK_COMP_ARRAY(COMP_CODEC("i2c-1AEC8804:00", "wm8804-spdif"))); SND_SOC_DAILINK_DEF(platform, DAILINK_COMP_ARRAY(COMP_PLATFORM("0000:00:0e.0"))); static struct snd_soc_dai_link dailink[] = { /* back ends */ { .name = "SSP5-Codec", .id = 0, .no_pcm = 1, .dpcm_playback = 1, .dpcm_capture = 1, .ops = &sof_wm8804_ops, SND_SOC_DAILINK_REG(ssp5_pin, ssp5_codec, platform), }, }; /* SoC card */ static struct snd_soc_card sof_wm8804_card = { .name = "wm8804", /* sof- prefix added automatically */ .owner = THIS_MODULE, .dai_link = dailink, .num_links = ARRAY_SIZE(dailink), }; /* i2c-<HID>:00 with HID being 8 chars */ static char codec_name[SND_ACPI_I2C_ID_LEN]; /* * to control the HifiBerry Digi+ PRO, it's required to toggle GPIO to * select the clock source. On the Up2 board, this means * Pin29/BCM5/Linux GPIO 430 and Pin 31/BCM6/ Linux GPIO 404. * * Using the ACPI device name is not very nice, but since we only use * the value for the Up2 board there is no risk of conflict with other * platforms. */ static struct gpiod_lookup_table up2_gpios_table = { /* .dev_id is set during probe */ .table = { GPIO_LOOKUP("INT3452:01", 73, "BCM-GPIO5", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("INT3452:01", 74, "BCM-GPIO6", GPIO_ACTIVE_HIGH), { }, }, }; static int sof_wm8804_probe(struct platform_device *pdev) { struct snd_soc_card *card; struct snd_soc_acpi_mach *mach; struct sof_card_private *ctx; struct acpi_device *adev; int dai_index = 0; int ret; int i; ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; mach = pdev->dev.platform_data; card = &sof_wm8804_card; card->dev = &pdev->dev; dmi_check_system(sof_wm8804_quirk_table); if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) { up2_gpios_table.dev_id = dev_name(&pdev->dev); gpiod_add_lookup_table(&up2_gpios_table); /* * The gpios are required for specific boards with * local oscillators, and optional in other cases. * Since we can't identify when they are needed, use * the GPIO as non-optional */ ctx->gpio_44 = devm_gpiod_get(&pdev->dev, "BCM-GPIO5", GPIOD_OUT_LOW); if (IS_ERR(ctx->gpio_44)) { ret = PTR_ERR(ctx->gpio_44); dev_err(&pdev->dev, "could not get BCM-GPIO5: %d\n", ret); return ret; } ctx->gpio_48 = devm_gpiod_get(&pdev->dev, "BCM-GPIO6", GPIOD_OUT_LOW); if (IS_ERR(ctx->gpio_48)) { ret = PTR_ERR(ctx->gpio_48); dev_err(&pdev->dev, "could not get BCM-GPIO6: %d\n", ret); return ret; } } /* fix index of codec dai */ for (i = 0; i < ARRAY_SIZE(dailink); i++) { if (!strcmp(dailink[i].codecs->name, "i2c-1AEC8804:00")) { dai_index = i; break; } } /* fixup codec name based on HID */ adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); if (adev) { snprintf(codec_name, sizeof(codec_name), "%s%s", "i2c-", acpi_dev_name(adev)); dailink[dai_index].codecs->name = codec_name; } acpi_dev_put(adev); snd_soc_card_set_drvdata(card, ctx); return devm_snd_soc_register_card(&pdev->dev, card); } static void sof_wm8804_remove(struct platform_device *pdev) { if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) gpiod_remove_lookup_table(&up2_gpios_table); } static struct platform_driver sof_wm8804_driver = { .driver = { .name = "sof-wm8804", .pm = &snd_soc_pm_ops, }, .probe = sof_wm8804_probe, .remove_new = sof_wm8804_remove, }; module_platform_driver(sof_wm8804_driver); MODULE_DESCRIPTION("ASoC Intel(R) SOF + WM8804 Machine driver"); MODULE_AUTHOR("Pierre-Louis Bossart"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:sof-wm8804"); |