Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 | // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. */ #include <linux/acpi.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/devfreq.h> #include <linux/gpio/consumer.h> #include <linux/interconnect.h> #include <linux/module.h> #include <linux/of.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/reset-controller.h> #include <linux/time.h> #include <soc/qcom/ice.h> #include <ufs/ufshcd.h> #include <ufs/ufshci.h> #include <ufs/ufs_quirks.h> #include <ufs/unipro.h> #include "ufshcd-pltfrm.h" #include "ufs-qcom.h" #define MCQ_QCFGPTR_MASK GENMASK(7, 0) #define MCQ_QCFGPTR_UNIT 0x200 #define MCQ_SQATTR_OFFSET(c) \ ((((c) >> 16) & MCQ_QCFGPTR_MASK) * MCQ_QCFGPTR_UNIT) #define MCQ_QCFG_SIZE 0x40 enum { TSTBUS_UAWM, TSTBUS_UARM, TSTBUS_TXUC, TSTBUS_RXUC, TSTBUS_DFC, TSTBUS_TRLUT, TSTBUS_TMRLUT, TSTBUS_OCSC, TSTBUS_UTP_HCI, TSTBUS_COMBINED, TSTBUS_WRAPPER, TSTBUS_UNIPRO, TSTBUS_MAX, }; #define QCOM_UFS_MAX_GEAR 5 #define QCOM_UFS_MAX_LANE 2 enum { MODE_MIN, MODE_PWM, MODE_HS_RA, MODE_HS_RB, MODE_MAX, }; static const struct __ufs_qcom_bw_table { u32 mem_bw; u32 cfg_bw; } ufs_qcom_bw_table[MODE_MAX + 1][QCOM_UFS_MAX_GEAR + 1][QCOM_UFS_MAX_LANE + 1] = { [MODE_MIN][0][0] = { 0, 0 }, /* Bandwidth values in KB/s */ [MODE_PWM][UFS_PWM_G1][UFS_LANE_1] = { 922, 1000 }, [MODE_PWM][UFS_PWM_G2][UFS_LANE_1] = { 1844, 1000 }, [MODE_PWM][UFS_PWM_G3][UFS_LANE_1] = { 3688, 1000 }, [MODE_PWM][UFS_PWM_G4][UFS_LANE_1] = { 7376, 1000 }, [MODE_PWM][UFS_PWM_G5][UFS_LANE_1] = { 14752, 1000 }, [MODE_PWM][UFS_PWM_G1][UFS_LANE_2] = { 1844, 1000 }, [MODE_PWM][UFS_PWM_G2][UFS_LANE_2] = { 3688, 1000 }, [MODE_PWM][UFS_PWM_G3][UFS_LANE_2] = { 7376, 1000 }, [MODE_PWM][UFS_PWM_G4][UFS_LANE_2] = { 14752, 1000 }, [MODE_PWM][UFS_PWM_G5][UFS_LANE_2] = { 29504, 1000 }, [MODE_HS_RA][UFS_HS_G1][UFS_LANE_1] = { 127796, 1000 }, [MODE_HS_RA][UFS_HS_G2][UFS_LANE_1] = { 255591, 1000 }, [MODE_HS_RA][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 }, [MODE_HS_RA][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 }, [MODE_HS_RA][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 }, [MODE_HS_RA][UFS_HS_G1][UFS_LANE_2] = { 255591, 1000 }, [MODE_HS_RA][UFS_HS_G2][UFS_LANE_2] = { 511181, 1000 }, [MODE_HS_RA][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, [MODE_HS_RA][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, [MODE_HS_RA][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, [MODE_HS_RB][UFS_HS_G1][UFS_LANE_1] = { 149422, 1000 }, [MODE_HS_RB][UFS_HS_G2][UFS_LANE_1] = { 298189, 1000 }, [MODE_HS_RB][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 }, [MODE_HS_RB][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 }, [MODE_HS_RB][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 }, [MODE_HS_RB][UFS_HS_G1][UFS_LANE_2] = { 298189, 1000 }, [MODE_HS_RB][UFS_HS_G2][UFS_LANE_2] = { 596378, 1000 }, [MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, [MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, [MODE_HS_RB][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, [MODE_MAX][0][0] = { 7643136, 307200 }, }; static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up); static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd) { return container_of(rcd, struct ufs_qcom_host, rcdev); } #ifdef CONFIG_SCSI_UFS_CRYPTO static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host) { if (host->hba->caps & UFSHCD_CAP_CRYPTO) qcom_ice_enable(host->ice); } static int ufs_qcom_ice_init(struct ufs_qcom_host *host) { struct ufs_hba *hba = host->hba; struct device *dev = hba->dev; struct qcom_ice *ice; ice = of_qcom_ice_get(dev); if (ice == ERR_PTR(-EOPNOTSUPP)) { dev_warn(dev, "Disabling inline encryption support\n"); ice = NULL; } if (IS_ERR_OR_NULL(ice)) return PTR_ERR_OR_ZERO(ice); host->ice = ice; hba->caps |= UFSHCD_CAP_CRYPTO; return 0; } static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host) { if (host->hba->caps & UFSHCD_CAP_CRYPTO) return qcom_ice_resume(host->ice); return 0; } static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host) { if (host->hba->caps & UFSHCD_CAP_CRYPTO) return qcom_ice_suspend(host->ice); return 0; } static int ufs_qcom_ice_program_key(struct ufs_hba *hba, const union ufs_crypto_cfg_entry *cfg, int slot) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); union ufs_crypto_cap_entry cap; bool config_enable = cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE; /* Only AES-256-XTS has been tested so far. */ cap = hba->crypto_cap_array[cfg->crypto_cap_idx]; if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS || cap.key_size != UFS_CRYPTO_KEY_SIZE_256) return -EOPNOTSUPP; if (config_enable) return qcom_ice_program_key(host->ice, QCOM_ICE_CRYPTO_ALG_AES_XTS, QCOM_ICE_CRYPTO_KEY_SIZE_256, cfg->crypto_key, cfg->data_unit_size, slot); else return qcom_ice_evict_key(host->ice, slot); } #else #define ufs_qcom_ice_program_key NULL static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host) { } static int ufs_qcom_ice_init(struct ufs_qcom_host *host) { return 0; } static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host) { return 0; } static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host) { return 0; } #endif static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) { if (!host->is_lane_clks_enabled) return; clk_bulk_disable_unprepare(host->num_clks, host->clks); host->is_lane_clks_enabled = false; } static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) { int err; err = clk_bulk_prepare_enable(host->num_clks, host->clks); if (err) return err; host->is_lane_clks_enabled = true; return 0; } static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) { int err; struct device *dev = host->hba->dev; if (has_acpi_companion(dev)) return 0; err = devm_clk_bulk_get_all(dev, &host->clks); if (err <= 0) return err; host->num_clks = err; return 0; } static int ufs_qcom_check_hibern8(struct ufs_hba *hba) { int err; u32 tx_fsm_val; unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS); do { err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), &tx_fsm_val); if (err || tx_fsm_val == TX_FSM_HIBERN8) break; /* sleep for max. 200us */ usleep_range(100, 200); } while (time_before(jiffies, timeout)); /* * we might have scheduled out for long during polling so * check the state again. */ if (time_after(jiffies, timeout)) err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), &tx_fsm_val); if (err) { dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", __func__, err); } else if (tx_fsm_val != TX_FSM_HIBERN8) { err = tx_fsm_val; dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", __func__, err); } return err; } static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) { ufshcd_rmwl(host->hba, QUNIPRO_SEL, QUNIPRO_SEL, REG_UFS_CFG1); if (host->hw_ver.major >= 0x05) ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0); } /* * ufs_qcom_host_reset - reset host controller and PHY */ static int ufs_qcom_host_reset(struct ufs_hba *hba) { int ret; struct ufs_qcom_host *host = ufshcd_get_variant(hba); bool reenable_intr; if (!host->core_reset) return 0; reenable_intr = hba->is_irq_enabled; ufshcd_disable_irq(hba); ret = reset_control_assert(host->core_reset); if (ret) { dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n", __func__, ret); return ret; } /* * The hardware requirement for delay between assert/deassert * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to * ~125us (4/32768). To be on the safe side add 200us delay. */ usleep_range(200, 210); ret = reset_control_deassert(host->core_reset); if (ret) { dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n", __func__, ret); return ret; } usleep_range(1000, 1100); if (reenable_intr) ufshcd_enable_irq(hba); return 0; } static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); if (host->hw_ver.major >= 0x4) return UFS_QCOM_MAX_GEAR(ufshcd_readl(hba, REG_UFS_PARAM0)); /* Default is HS-G3 */ return UFS_HS_G3; } static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_host_params *host_params = &host->host_params; struct phy *phy = host->generic_phy; enum phy_mode mode; int ret; /* * HW ver 5 can only support up to HS-G5 Rate-A due to HW limitations. * If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, * so that the subsequent power mode change shall stick to Rate-A. */ if (host->hw_ver.major == 0x5) { if (host->phy_gear == UFS_HS_G5) host_params->hs_rate = PA_HS_MODE_A; else host_params->hs_rate = PA_HS_MODE_B; } mode = host_params->hs_rate == PA_HS_MODE_B ? PHY_MODE_UFS_HS_B : PHY_MODE_UFS_HS_A; /* Reset UFS Host Controller and PHY */ ret = ufs_qcom_host_reset(hba); if (ret) return ret; /* phy initialization - calibrate the phy */ ret = phy_init(phy); if (ret) { dev_err(hba->dev, "%s: phy init failed, ret = %d\n", __func__, ret); return ret; } ret = phy_set_mode_ext(phy, mode, host->phy_gear); if (ret) goto out_disable_phy; /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); if (ret) { dev_err(hba->dev, "%s: phy power on failed, ret = %d\n", __func__, ret); goto out_disable_phy; } ufs_qcom_select_unipro_mode(host); return 0; out_disable_phy: phy_exit(phy); return ret; } /* * The UTP controller has a number of internal clock gating cells (CGCs). * Internal hardware sub-modules within the UTP controller control the CGCs. * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved * in a specific operation, UTP controller CGCs are by default disabled and * this function enables them (after every UFS link startup) to save some power * leakage. */ static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) { ufshcd_rmwl(hba, REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2); /* Ensure that HW clock gating is enabled before next operations */ ufshcd_readl(hba, REG_UFS_CFG2); } static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); int err; switch (status) { case PRE_CHANGE: err = ufs_qcom_power_up_sequence(hba); if (err) return err; /* * The PHY PLL output is the source of tx/rx lane symbol * clocks, hence, enable the lane clocks only after PHY * is initialized. */ err = ufs_qcom_enable_lane_clks(host); break; case POST_CHANGE: /* check if UFS PHY moved from DISABLED to HIBERN8 */ err = ufs_qcom_check_hibern8(hba); ufs_qcom_enable_hw_clk_gating(hba); ufs_qcom_ice_enable(host); break; default: dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); err = -EINVAL; break; } return err; } /** * ufs_qcom_cfg_timers - Configure ufs qcom cfg timers * * @hba: host controller instance * @gear: Current operating gear * @hs: current power mode * @rate: current operating rate (A or B) * @update_link_startup_timer: indicate if link_start ongoing * @is_pre_scale_up: flag to check if pre scale up condition. * Return: zero for success and non-zero in case of a failure. */ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate, bool update_link_startup_timer, bool is_pre_scale_up) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_clk_info *clki; unsigned long core_clk_rate = 0; u32 core_clk_cycles_per_us; /* * UTP controller uses SYS1CLK_1US_REG register for Interrupt * Aggregation logic. * It is mandatory to write SYS1CLK_1US_REG register on UFS host * controller V4.0.0 onwards. */ if (host->hw_ver.major < 4 && !ufshcd_is_intr_aggr_allowed(hba)) return 0; if (gear == 0) { dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); return -EINVAL; } list_for_each_entry(clki, &hba->clk_list_head, list) { if (!strcmp(clki->name, "core_clk")) { if (is_pre_scale_up) core_clk_rate = clki->max_freq; else core_clk_rate = clk_get_rate(clki->clk); break; } } /* If frequency is smaller than 1MHz, set to 1MHz */ if (core_clk_rate < DEFAULT_CLK_RATE_HZ) core_clk_rate = DEFAULT_CLK_RATE_HZ; core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC; if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) { ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US); /* * make sure above write gets applied before we return from * this function. */ ufshcd_readl(hba, REG_UFS_SYS1CLK_1US); } return 0; } static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, enum ufs_notify_change_status status) { int err = 0; switch (status) { case PRE_CHANGE: if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE, 0, true, false)) { dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", __func__); return -EINVAL; } err = ufs_qcom_set_core_clk_ctrl(hba, true); if (err) dev_err(hba->dev, "cfg core clk ctrl failed\n"); /* * Some UFS devices (and may be host) have issues if LCC is * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 * before link startup which will make sure that both host * and device TX LCC are disabled once link startup is * completed. */ if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) err = ufshcd_disable_host_tx_lcc(hba); break; default: break; } return err; } static void ufs_qcom_device_reset_ctrl(struct ufs_hba *hba, bool asserted) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); /* reset gpio is optional */ if (!host->device_reset) return; gpiod_set_value_cansleep(host->device_reset, asserted); } static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct phy *phy = host->generic_phy; if (status == PRE_CHANGE) return 0; if (ufs_qcom_is_link_off(hba)) { /* * Disable the tx/rx lane symbol clocks before PHY is * powered down as the PLL source should be disabled * after downstream clocks are disabled. */ ufs_qcom_disable_lane_clks(host); phy_power_off(phy); /* reset the connected UFS device during power down */ ufs_qcom_device_reset_ctrl(hba, true); } else if (!ufs_qcom_is_link_active(hba)) { ufs_qcom_disable_lane_clks(host); } return ufs_qcom_ice_suspend(host); } static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct phy *phy = host->generic_phy; int err; if (ufs_qcom_is_link_off(hba)) { err = phy_power_on(phy); if (err) { dev_err(hba->dev, "%s: failed PHY power on: %d\n", __func__, err); return err; } err = ufs_qcom_enable_lane_clks(host); if (err) return err; } else if (!ufs_qcom_is_link_active(hba)) { err = ufs_qcom_enable_lane_clks(host); if (err) return err; } return ufs_qcom_ice_resume(host); } static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable) { if (host->dev_ref_clk_ctrl_mmio && (enable ^ host->is_dev_ref_clk_enabled)) { u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio); if (enable) temp |= host->dev_ref_clk_en_mask; else temp &= ~host->dev_ref_clk_en_mask; /* * If we are here to disable this clock it might be immediately * after entering into hibern8 in which case we need to make * sure that device ref_clk is active for specific time after * hibern8 enter. */ if (!enable) { unsigned long gating_wait; gating_wait = host->hba->dev_info.clk_gating_wait_us; if (!gating_wait) { udelay(1); } else { /* * bRefClkGatingWaitTime defines the minimum * time for which the reference clock is * required by device during transition from * HS-MODE to LS-MODE or HIBERN8 state. Give it * more delay to be on the safe side. */ gating_wait += 10; usleep_range(gating_wait, gating_wait + 10); } } writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio); /* * Make sure the write to ref_clk reaches the destination and * not stored in a Write Buffer (WB). */ readl(host->dev_ref_clk_ctrl_mmio); /* * If we call hibern8 exit after this, we need to make sure that * device ref_clk is stable for at least 1us before the hibern8 * exit command. */ if (enable) udelay(1); host->is_dev_ref_clk_enabled = enable; } } static int ufs_qcom_icc_set_bw(struct ufs_qcom_host *host, u32 mem_bw, u32 cfg_bw) { struct device *dev = host->hba->dev; int ret; ret = icc_set_bw(host->icc_ddr, 0, mem_bw); if (ret < 0) { dev_err(dev, "failed to set bandwidth request: %d\n", ret); return ret; } ret = icc_set_bw(host->icc_cpu, 0, cfg_bw); if (ret < 0) { dev_err(dev, "failed to set bandwidth request: %d\n", ret); return ret; } return 0; } static struct __ufs_qcom_bw_table ufs_qcom_get_bw_table(struct ufs_qcom_host *host) { struct ufs_pa_layer_attr *p = &host->dev_req_params; int gear = max_t(u32, p->gear_rx, p->gear_tx); int lane = max_t(u32, p->lane_rx, p->lane_tx); if (ufshcd_is_hs_mode(p)) { if (p->hs_rate == PA_HS_MODE_B) return ufs_qcom_bw_table[MODE_HS_RB][gear][lane]; else return ufs_qcom_bw_table[MODE_HS_RA][gear][lane]; } else { return ufs_qcom_bw_table[MODE_PWM][gear][lane]; } } static int ufs_qcom_icc_update_bw(struct ufs_qcom_host *host) { struct __ufs_qcom_bw_table bw_table; bw_table = ufs_qcom_get_bw_table(host); return ufs_qcom_icc_set_bw(host, bw_table.mem_bw, bw_table.cfg_bw); } static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, enum ufs_notify_change_status status, struct ufs_pa_layer_attr *dev_max_params, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_host_params *host_params = &host->host_params; int ret = 0; if (!dev_req_params) { pr_err("%s: incoming dev_req_params is NULL\n", __func__); return -EINVAL; } switch (status) { case PRE_CHANGE: ret = ufshcd_negotiate_pwr_params(host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); return ret; } /* * During UFS driver probe, always update the PHY gear to match the negotiated * gear, so that, if quirk UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is enabled, * the second init can program the optimal PHY settings. This allows one to start * the first init with either the minimum or the maximum support gear. */ if (hba->ufshcd_state == UFSHCD_STATE_RESET) { /* * Skip REINIT if the negotiated gear matches with the * initial phy_gear. Otherwise, update the phy_gear to * program the optimal gear setting during REINIT. */ if (host->phy_gear == dev_req_params->gear_tx) hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; else host->phy_gear = dev_req_params->gear_tx; } /* enable the device ref clock before changing to HS mode */ if (!ufshcd_is_hs_mode(&hba->pwr_info) && ufshcd_is_hs_mode(dev_req_params)) ufs_qcom_dev_ref_clk_ctrl(host, true); if (host->hw_ver.major >= 0x4) { ufshcd_dme_configure_adapt(hba, dev_req_params->gear_tx, PA_INITIAL_ADAPT); } break; case POST_CHANGE: if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, dev_req_params->pwr_rx, dev_req_params->hs_rate, false, false)) { dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", __func__); /* * we return error code at the end of the routine, * but continue to configure UFS_PHY_TX_LANE_ENABLE * and bus voting as usual */ ret = -EINVAL; } /* cache the power mode parameters to use internally */ memcpy(&host->dev_req_params, dev_req_params, sizeof(*dev_req_params)); ufs_qcom_icc_update_bw(host); /* disable the device ref clock if entered PWM mode */ if (ufshcd_is_hs_mode(&hba->pwr_info) && !ufshcd_is_hs_mode(dev_req_params)) ufs_qcom_dev_ref_clk_ctrl(host, false); break; default: ret = -EINVAL; break; } return ret; } static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba) { int err; u32 pa_vs_config_reg1; err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), &pa_vs_config_reg1); if (err) return err; /* Allow extension of MSB bits of PA_SaveConfigTime attribute */ return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), (pa_vs_config_reg1 | (1 << 12))); } static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba) { int err = 0; if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME) err = ufs_qcom_quirk_host_pa_saveconfigtime(hba); if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC) hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE; return err; } static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba) { return ufshci_version(2, 0); } /** * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks * @hba: host controller instance * * QCOM UFS host controller might have some non standard behaviours (quirks) * than what is specified by UFSHCI specification. Advertise all such * quirks to standard UFS host controller driver so standard takes them into * account. */ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); if (host->hw_ver.major == 0x2) hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION; if (host->hw_ver.major > 0x3) hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; } static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host) { struct ufs_host_params *host_params = &host->host_params; u32 val, dev_major; /* * Default to powering up the PHY to the max gear possible, which is * backwards compatible with lower gears but not optimal from * a power usage point of view. After device negotiation, if the * gear is lower a reinit will be performed to program the PHY * to the ideal gear for this combo of controller and device. */ host->phy_gear = host_params->hs_tx_gear; if (host->hw_ver.major < 0x4) { /* * These controllers only have one PHY init sequence, * let's power up the PHY using that (the minimum supported * gear, UFS_HS_G2). */ host->phy_gear = UFS_HS_G2; } else if (host->hw_ver.major >= 0x5) { val = ufshcd_readl(host->hba, REG_UFS_DEBUG_SPARE_CFG); dev_major = FIELD_GET(UFS_DEV_VER_MAJOR_MASK, val); /* * Since the UFS device version is populated, let's remove the * REINIT quirk as the negotiated gear won't change during boot. * So there is no need to do reinit. */ if (dev_major != 0x0) host->hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; /* * For UFS 3.1 device and older, power up the PHY using HS-G4 * PHY gear to save power. */ if (dev_major > 0x0 && dev_major < 0x4) host->phy_gear = UFS_HS_G4; } } static void ufs_qcom_set_host_params(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_host_params *host_params = &host->host_params; ufshcd_init_host_params(host_params); /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ host_params->hs_tx_gear = host_params->hs_rx_gear = ufs_qcom_get_hs_gear(hba); } static void ufs_qcom_set_caps(struct ufs_hba *hba) { hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; hba->caps |= UFSHCD_CAP_CLK_SCALING | UFSHCD_CAP_WB_WITH_CLK_SCALING; hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND; hba->caps |= UFSHCD_CAP_WB_EN; hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE; hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND; } /** * ufs_qcom_setup_clocks - enables/disable clocks * @hba: host controller instance * @on: If true, enable clocks else disable them. * @status: PRE_CHANGE or POST_CHANGE notify * * Return: 0 on success, non-zero on failure. */ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); /* * In case ufs_qcom_init() is not yet done, simply ignore. * This ufs_qcom_setup_clocks() shall be called from * ufs_qcom_init() after init is done. */ if (!host) return 0; switch (status) { case PRE_CHANGE: if (on) { ufs_qcom_icc_update_bw(host); } else { if (!ufs_qcom_is_link_active(hba)) { /* disable device ref_clk */ ufs_qcom_dev_ref_clk_ctrl(host, false); } } break; case POST_CHANGE: if (on) { /* enable the device ref clock for HS mode*/ if (ufshcd_is_hs_mode(&hba->pwr_info)) ufs_qcom_dev_ref_clk_ctrl(host, true); } else { ufs_qcom_icc_set_bw(host, ufs_qcom_bw_table[MODE_MIN][0][0].mem_bw, ufs_qcom_bw_table[MODE_MIN][0][0].cfg_bw); } break; } return 0; } static int ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) { struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); ufs_qcom_assert_reset(host->hba); /* provide 1ms delay to let the reset pulse propagate. */ usleep_range(1000, 1100); return 0; } static int ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) { struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); ufs_qcom_deassert_reset(host->hba); /* * after reset deassertion, phy will need all ref clocks, * voltage, current to settle down before starting serdes. */ usleep_range(1000, 1100); return 0; } static const struct reset_control_ops ufs_qcom_reset_ops = { .assert = ufs_qcom_reset_assert, .deassert = ufs_qcom_reset_deassert, }; static int ufs_qcom_icc_init(struct ufs_qcom_host *host) { struct device *dev = host->hba->dev; int ret; host->icc_ddr = devm_of_icc_get(dev, "ufs-ddr"); if (IS_ERR(host->icc_ddr)) return dev_err_probe(dev, PTR_ERR(host->icc_ddr), "failed to acquire interconnect path\n"); host->icc_cpu = devm_of_icc_get(dev, "cpu-ufs"); if (IS_ERR(host->icc_cpu)) return dev_err_probe(dev, PTR_ERR(host->icc_cpu), "failed to acquire interconnect path\n"); /* * Set Maximum bandwidth vote before initializing the UFS controller and * device. Ideally, a minimal interconnect vote would suffice for the * initialization, but a max vote would allow faster initialization. */ ret = ufs_qcom_icc_set_bw(host, ufs_qcom_bw_table[MODE_MAX][0][0].mem_bw, ufs_qcom_bw_table[MODE_MAX][0][0].cfg_bw); if (ret < 0) return dev_err_probe(dev, ret, "failed to set bandwidth request\n"); return 0; } /** * ufs_qcom_init - bind phy with controller * @hba: host controller instance * * Binds PHY with controller and powers up PHY enabling clocks * and regulators. * * Return: -EPROBE_DEFER if binding fails, returns negative error * on phy power up failure and returns zero on success. */ static int ufs_qcom_init(struct ufs_hba *hba) { int err; struct device *dev = hba->dev; struct ufs_qcom_host *host; struct ufs_clk_info *clki; host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); if (!host) return -ENOMEM; /* Make a two way bind between the qcom host and the hba */ host->hba = hba; ufshcd_set_variant(hba, host); /* Setup the optional reset control of HCI */ host->core_reset = devm_reset_control_get_optional(hba->dev, "rst"); if (IS_ERR(host->core_reset)) { err = dev_err_probe(dev, PTR_ERR(host->core_reset), "Failed to get reset control\n"); goto out_variant_clear; } /* Fire up the reset controller. Failure here is non-fatal. */ host->rcdev.of_node = dev->of_node; host->rcdev.ops = &ufs_qcom_reset_ops; host->rcdev.owner = dev->driver->owner; host->rcdev.nr_resets = 1; err = devm_reset_controller_register(dev, &host->rcdev); if (err) dev_warn(dev, "Failed to register reset controller\n"); if (!has_acpi_companion(dev)) { host->generic_phy = devm_phy_get(dev, "ufsphy"); if (IS_ERR(host->generic_phy)) { err = dev_err_probe(dev, PTR_ERR(host->generic_phy), "Failed to get PHY\n"); goto out_variant_clear; } } err = ufs_qcom_icc_init(host); if (err) goto out_variant_clear; host->device_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(host->device_reset)) { err = dev_err_probe(dev, PTR_ERR(host->device_reset), "Failed to acquire device reset gpio\n"); goto out_variant_clear; } ufs_qcom_get_controller_revision(hba, &host->hw_ver.major, &host->hw_ver.minor, &host->hw_ver.step); host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1; host->dev_ref_clk_en_mask = BIT(26); list_for_each_entry(clki, &hba->clk_list_head, list) { if (!strcmp(clki->name, "core_clk_unipro")) clki->keep_link_active = true; } err = ufs_qcom_init_lane_clks(host); if (err) goto out_variant_clear; ufs_qcom_set_caps(hba); ufs_qcom_advertise_quirks(hba); ufs_qcom_set_host_params(hba); ufs_qcom_set_phy_gear(host); err = ufs_qcom_ice_init(host); if (err) goto out_variant_clear; ufs_qcom_setup_clocks(hba, true, POST_CHANGE); ufs_qcom_get_default_testbus_cfg(host); err = ufs_qcom_testbus_config(host); if (err) /* Failure is non-fatal */ dev_warn(dev, "%s: failed to configure the testbus %d\n", __func__, err); return 0; out_variant_clear: ufshcd_set_variant(hba, NULL); return err; } static void ufs_qcom_exit(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); ufs_qcom_disable_lane_clks(host); phy_power_off(host->generic_phy); phy_exit(host->generic_phy); } /** * ufs_qcom_set_clk_40ns_cycles - Configure 40ns clk cycles * * @hba: host controller instance * @cycles_in_1us: No of cycles in 1us to be configured * * Returns error if dme get/set configuration for 40ns fails * and returns zero on success. */ static int ufs_qcom_set_clk_40ns_cycles(struct ufs_hba *hba, u32 cycles_in_1us) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); u32 cycles_in_40ns; u32 reg; int err; /* * UFS host controller V4.0.0 onwards needs to program * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed * frequency of unipro core clk of UFS host controller. */ if (host->hw_ver.major < 4) return 0; /* * Generic formulae for cycles_in_40ns = (freq_unipro/25) is not * applicable for all frequencies. For ex: ceil(37.5 MHz/25) will * be 2 and ceil(403 MHZ/25) will be 17 whereas Hardware * specification expect to be 16. Hence use exact hardware spec * mandated value for cycles_in_40ns instead of calculating using * generic formulae. */ switch (cycles_in_1us) { case UNIPRO_CORE_CLK_FREQ_403_MHZ: cycles_in_40ns = 16; break; case UNIPRO_CORE_CLK_FREQ_300_MHZ: cycles_in_40ns = 12; break; case UNIPRO_CORE_CLK_FREQ_201_5_MHZ: cycles_in_40ns = 8; break; case UNIPRO_CORE_CLK_FREQ_150_MHZ: cycles_in_40ns = 6; break; case UNIPRO_CORE_CLK_FREQ_100_MHZ: cycles_in_40ns = 4; break; case UNIPRO_CORE_CLK_FREQ_75_MHZ: cycles_in_40ns = 3; break; case UNIPRO_CORE_CLK_FREQ_37_5_MHZ: cycles_in_40ns = 2; break; default: dev_err(hba->dev, "UNIPRO clk freq %u MHz not supported\n", cycles_in_1us); return -EINVAL; } err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), ®); if (err) return err; reg &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK; reg |= cycles_in_40ns; return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), reg); } static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct list_head *head = &hba->clk_list_head; struct ufs_clk_info *clki; u32 cycles_in_1us = 0; u32 core_clk_ctrl_reg; int err; list_for_each_entry(clki, head, list) { if (!IS_ERR_OR_NULL(clki->clk) && !strcmp(clki->name, "core_clk_unipro")) { if (!clki->max_freq) cycles_in_1us = 150; /* default for backwards compatibility */ else if (is_scale_up) cycles_in_1us = ceil(clki->max_freq, (1000 * 1000)); else cycles_in_1us = ceil(clk_get_rate(clki->clk), (1000 * 1000)); break; } } err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &core_clk_ctrl_reg); if (err) return err; /* Bit mask is different for UFS host controller V4.0.0 onwards */ if (host->hw_ver.major >= 4) { if (!FIELD_FIT(CLK_1US_CYCLES_MASK_V4, cycles_in_1us)) return -ERANGE; core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK_V4; core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, cycles_in_1us); } else { if (!FIELD_FIT(CLK_1US_CYCLES_MASK, cycles_in_1us)) return -ERANGE; core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK; core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, cycles_in_1us); } /* Clear CORE_CLK_DIV_EN */ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; err = ufshcd_dme_set(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), core_clk_ctrl_reg); if (err) return err; /* Configure unipro core clk 40ns attribute */ return ufs_qcom_set_clk_40ns_cycles(hba, cycles_in_1us); } static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_pa_layer_attr *attr = &host->dev_req_params; int ret; ret = ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx, attr->hs_rate, false, true); if (ret) { dev_err(hba->dev, "%s ufs cfg timer failed\n", __func__); return ret; } /* set unipro core clock attributes and clear clock divider */ return ufs_qcom_set_core_clk_ctrl(hba, true); } static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba) { return 0; } static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba) { int err; u32 core_clk_ctrl_reg; err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &core_clk_ctrl_reg); /* make sure CORE_CLK_DIV_EN is cleared */ if (!err && (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) { core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; err = ufshcd_dme_set(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), core_clk_ctrl_reg); } return err; } static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba) { /* set unipro core clock attributes and clear clock divider */ return ufs_qcom_set_core_clk_ctrl(hba, false); } static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, bool scale_up, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); int err; /* check the host controller state before sending hibern8 cmd */ if (!ufshcd_is_hba_active(hba)) return 0; if (status == PRE_CHANGE) { err = ufshcd_uic_hibern8_enter(hba); if (err) return err; if (scale_up) err = ufs_qcom_clk_scale_up_pre_change(hba); else err = ufs_qcom_clk_scale_down_pre_change(hba); if (err) { ufshcd_uic_hibern8_exit(hba); return err; } } else { if (scale_up) err = ufs_qcom_clk_scale_up_post_change(hba); else err = ufs_qcom_clk_scale_down_post_change(hba); if (err) { ufshcd_uic_hibern8_exit(hba); return err; } ufs_qcom_icc_update_bw(host); ufshcd_uic_hibern8_exit(hba); } return 0; } static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host) { ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, UFS_REG_TEST_BUS_EN, REG_UFS_CFG1); ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1); } static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host) { /* provide a legal default configuration */ host->testbus.select_major = TSTBUS_UNIPRO; host->testbus.select_minor = 37; } static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) { if (host->testbus.select_major >= TSTBUS_MAX) { dev_err(host->hba->dev, "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", __func__, host->testbus.select_major); return false; } return true; } int ufs_qcom_testbus_config(struct ufs_qcom_host *host) { int reg; int offset; u32 mask = TEST_BUS_SUB_SEL_MASK; if (!host) return -EINVAL; if (!ufs_qcom_testbus_cfg_is_ok(host)) return -EPERM; switch (host->testbus.select_major) { case TSTBUS_UAWM: reg = UFS_TEST_BUS_CTRL_0; offset = 24; break; case TSTBUS_UARM: reg = UFS_TEST_BUS_CTRL_0; offset = 16; break; case TSTBUS_TXUC: reg = UFS_TEST_BUS_CTRL_0; offset = 8; break; case TSTBUS_RXUC: reg = UFS_TEST_BUS_CTRL_0; offset = 0; break; case TSTBUS_DFC: reg = UFS_TEST_BUS_CTRL_1; offset = 24; break; case TSTBUS_TRLUT: reg = UFS_TEST_BUS_CTRL_1; offset = 16; break; case TSTBUS_TMRLUT: reg = UFS_TEST_BUS_CTRL_1; offset = 8; break; case TSTBUS_OCSC: reg = UFS_TEST_BUS_CTRL_1; offset = 0; break; case TSTBUS_WRAPPER: reg = UFS_TEST_BUS_CTRL_2; offset = 16; break; case TSTBUS_COMBINED: reg = UFS_TEST_BUS_CTRL_2; offset = 8; break; case TSTBUS_UTP_HCI: reg = UFS_TEST_BUS_CTRL_2; offset = 0; break; case TSTBUS_UNIPRO: reg = UFS_UNIPRO_CFG; offset = 20; mask = 0xFFF; break; /* * No need for a default case, since * ufs_qcom_testbus_cfg_is_ok() checks that the configuration * is legal */ } mask <<= offset; ufshcd_rmwl(host->hba, TEST_BUS_SEL, (u32)host->testbus.select_major << 19, REG_UFS_CFG1); ufshcd_rmwl(host->hba, mask, (u32)host->testbus.select_minor << offset, reg); ufs_qcom_enable_test_bus(host); /* * Make sure the test bus configuration is * committed before returning. */ mb(); return 0; } static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba) { u32 reg; struct ufs_qcom_host *host; host = ufshcd_get_variant(hba); ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4, "HCI Vendor Specific Registers "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC); ufshcd_dump_regs(hba, reg, 44 * 4, "UFS_UFS_DBG_RD_REG_OCSC "); reg = ufshcd_readl(hba, REG_UFS_CFG1); reg |= UTP_DBG_RAMS_EN; ufshcd_writel(hba, reg, REG_UFS_CFG1); reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM); ufshcd_dump_regs(hba, reg, 32 * 4, "UFS_UFS_DBG_RD_EDTL_RAM "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM); ufshcd_dump_regs(hba, reg, 128 * 4, "UFS_UFS_DBG_RD_DESC_RAM "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM); ufshcd_dump_regs(hba, reg, 64 * 4, "UFS_UFS_DBG_RD_PRDT_RAM "); /* clear bit 17 - UTP_DBG_RAMS_EN */ ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM); ufshcd_dump_regs(hba, reg, 4 * 4, "UFS_DBG_RD_REG_UAWM "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM); ufshcd_dump_regs(hba, reg, 4 * 4, "UFS_DBG_RD_REG_UARM "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC); ufshcd_dump_regs(hba, reg, 48 * 4, "UFS_DBG_RD_REG_TXUC "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC); ufshcd_dump_regs(hba, reg, 27 * 4, "UFS_DBG_RD_REG_RXUC "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC); ufshcd_dump_regs(hba, reg, 19 * 4, "UFS_DBG_RD_REG_DFC "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT); ufshcd_dump_regs(hba, reg, 34 * 4, "UFS_DBG_RD_REG_TRLUT "); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT); ufshcd_dump_regs(hba, reg, 9 * 4, "UFS_DBG_RD_REG_TMRLUT "); } /** * ufs_qcom_device_reset() - toggle the (optional) device reset line * @hba: per-adapter instance * * Toggles the (optional) reset line to reset the attached device. */ static int ufs_qcom_device_reset(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); /* reset gpio is optional */ if (!host->device_reset) return -EOPNOTSUPP; /* * The UFS device shall detect reset pulses of 1us, sleep for 10us to * be on the safe side. */ ufs_qcom_device_reset_ctrl(hba, true); usleep_range(10, 15); ufs_qcom_device_reset_ctrl(hba, false); usleep_range(10, 15); return 0; } #if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, struct devfreq_dev_profile *p, struct devfreq_simple_ondemand_data *d) { p->polling_ms = 60; p->timer = DEVFREQ_TIMER_DELAYED; d->upthreshold = 70; d->downdifferential = 5; } #else static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, struct devfreq_dev_profile *p, struct devfreq_simple_ondemand_data *data) { } #endif static void ufs_qcom_reinit_notify(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); phy_power_off(host->generic_phy); } /* Resources */ static const struct ufshcd_res_info ufs_res_info[RES_MAX] = { {.name = "ufs_mem",}, {.name = "mcq",}, /* Submission Queue DAO */ {.name = "mcq_sqd",}, /* Submission Queue Interrupt Status */ {.name = "mcq_sqis",}, /* Completion Queue DAO */ {.name = "mcq_cqd",}, /* Completion Queue Interrupt Status */ {.name = "mcq_cqis",}, /* MCQ vendor specific */ {.name = "mcq_vs",}, }; static int ufs_qcom_mcq_config_resource(struct ufs_hba *hba) { struct platform_device *pdev = to_platform_device(hba->dev); struct ufshcd_res_info *res; struct resource *res_mem, *res_mcq; int i, ret; memcpy(hba->res, ufs_res_info, sizeof(ufs_res_info)); for (i = 0; i < RES_MAX; i++) { res = &hba->res[i]; res->resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->name); if (!res->resource) { dev_info(hba->dev, "Resource %s not provided\n", res->name); if (i == RES_UFS) return -ENODEV; continue; } else if (i == RES_UFS) { res_mem = res->resource; res->base = hba->mmio_base; continue; } res->base = devm_ioremap_resource(hba->dev, res->resource); if (IS_ERR(res->base)) { dev_err(hba->dev, "Failed to map res %s, err=%d\n", res->name, (int)PTR_ERR(res->base)); ret = PTR_ERR(res->base); res->base = NULL; return ret; } } /* MCQ resource provided in DT */ res = &hba->res[RES_MCQ]; /* Bail if MCQ resource is provided */ if (res->base) goto out; /* Explicitly allocate MCQ resource from ufs_mem */ res_mcq = devm_kzalloc(hba->dev, sizeof(*res_mcq), GFP_KERNEL); if (!res_mcq) return -ENOMEM; res_mcq->start = res_mem->start + MCQ_SQATTR_OFFSET(hba->mcq_capabilities); res_mcq->end = res_mcq->start + hba->nr_hw_queues * MCQ_QCFG_SIZE - 1; res_mcq->flags = res_mem->flags; res_mcq->name = "mcq"; ret = insert_resource(&iomem_resource, res_mcq); if (ret) { dev_err(hba->dev, "Failed to insert MCQ resource, err=%d\n", ret); return ret; } res->base = devm_ioremap_resource(hba->dev, res_mcq); if (IS_ERR(res->base)) { dev_err(hba->dev, "MCQ registers mapping failed, err=%d\n", (int)PTR_ERR(res->base)); ret = PTR_ERR(res->base); goto ioremap_err; } out: hba->mcq_base = res->base; return 0; ioremap_err: res->base = NULL; remove_resource(res_mcq); return ret; } static int ufs_qcom_op_runtime_config(struct ufs_hba *hba) { struct ufshcd_res_info *mem_res, *sqdao_res; struct ufshcd_mcq_opr_info_t *opr; int i; mem_res = &hba->res[RES_UFS]; sqdao_res = &hba->res[RES_MCQ_SQD]; if (!mem_res->base || !sqdao_res->base) return -EINVAL; for (i = 0; i < OPR_MAX; i++) { opr = &hba->mcq_opr[i]; opr->offset = sqdao_res->resource->start - mem_res->resource->start + 0x40 * i; opr->stride = 0x100; opr->base = sqdao_res->base + 0x40 * i; } return 0; } static int ufs_qcom_get_hba_mac(struct ufs_hba *hba) { /* Qualcomm HC supports up to 64 */ return MAX_SUPP_MAC; } static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba, unsigned long *ocqs) { struct ufshcd_res_info *mcq_vs_res = &hba->res[RES_MCQ_VS]; if (!mcq_vs_res->base) return -EINVAL; *ocqs = readl(mcq_vs_res->base + UFS_MEM_CQIS_VS); return 0; } static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) { struct device *dev = msi_desc_to_dev(desc); struct ufs_hba *hba = dev_get_drvdata(dev); ufshcd_mcq_config_esi(hba, msg); } static irqreturn_t ufs_qcom_mcq_esi_handler(int irq, void *data) { struct msi_desc *desc = data; struct device *dev = msi_desc_to_dev(desc); struct ufs_hba *hba = dev_get_drvdata(dev); u32 id = desc->msi_index; struct ufs_hw_queue *hwq = &hba->uhq[id]; ufshcd_mcq_write_cqis(hba, 0x1, id); ufshcd_mcq_poll_cqe_lock(hba, hwq); return IRQ_HANDLED; } static int ufs_qcom_config_esi(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct msi_desc *desc; struct msi_desc *failed_desc = NULL; int nr_irqs, ret; if (host->esi_enabled) return 0; /* * 1. We only handle CQs as of now. * 2. Poll queues do not need ESI. */ nr_irqs = hba->nr_hw_queues - hba->nr_queues[HCTX_TYPE_POLL]; ret = platform_device_msi_init_and_alloc_irqs(hba->dev, nr_irqs, ufs_qcom_write_msi_msg); if (ret) { dev_err(hba->dev, "Failed to request Platform MSI %d\n", ret); return ret; } msi_lock_descs(hba->dev); msi_for_each_desc(desc, hba->dev, MSI_DESC_ALL) { ret = devm_request_irq(hba->dev, desc->irq, ufs_qcom_mcq_esi_handler, IRQF_SHARED, "qcom-mcq-esi", desc); if (ret) { dev_err(hba->dev, "%s: Fail to request IRQ for %d, err = %d\n", __func__, desc->irq, ret); failed_desc = desc; break; } } msi_unlock_descs(hba->dev); if (ret) { /* Rewind */ msi_lock_descs(hba->dev); msi_for_each_desc(desc, hba->dev, MSI_DESC_ALL) { if (desc == failed_desc) break; devm_free_irq(hba->dev, desc->irq, hba); } msi_unlock_descs(hba->dev); platform_device_msi_free_irqs_all(hba->dev); } else { if (host->hw_ver.major == 6 && host->hw_ver.minor == 0 && host->hw_ver.step == 0) ufshcd_rmwl(hba, ESI_VEC_MASK, FIELD_PREP(ESI_VEC_MASK, MAX_ESI_VEC - 1), REG_UFS_CFG3); ufshcd_mcq_enable_esi(hba); host->esi_enabled = true; } return ret; } /* * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations * * The variant operations configure the necessary controller and PHY * handshake during initialization. */ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { .name = "qcom", .init = ufs_qcom_init, .exit = ufs_qcom_exit, .get_ufs_hci_version = ufs_qcom_get_ufs_hci_version, .clk_scale_notify = ufs_qcom_clk_scale_notify, .setup_clocks = ufs_qcom_setup_clocks, .hce_enable_notify = ufs_qcom_hce_enable_notify, .link_startup_notify = ufs_qcom_link_startup_notify, .pwr_change_notify = ufs_qcom_pwr_change_notify, .apply_dev_quirks = ufs_qcom_apply_dev_quirks, .suspend = ufs_qcom_suspend, .resume = ufs_qcom_resume, .dbg_register_dump = ufs_qcom_dump_dbg_regs, .device_reset = ufs_qcom_device_reset, .config_scaling_param = ufs_qcom_config_scaling_param, .program_key = ufs_qcom_ice_program_key, .reinit_notify = ufs_qcom_reinit_notify, .mcq_config_resource = ufs_qcom_mcq_config_resource, .get_hba_mac = ufs_qcom_get_hba_mac, .op_runtime_config = ufs_qcom_op_runtime_config, .get_outstanding_cqs = ufs_qcom_get_outstanding_cqs, .config_esi = ufs_qcom_config_esi, }; /** * ufs_qcom_probe - probe routine of the driver * @pdev: pointer to Platform device handle * * Return: zero for success and non-zero for failure. */ static int ufs_qcom_probe(struct platform_device *pdev) { int err; struct device *dev = &pdev->dev; /* Perform generic probe */ err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops); if (err) return dev_err_probe(dev, err, "ufshcd_pltfrm_init() failed\n"); return 0; } /** * ufs_qcom_remove - set driver_data of the device to NULL * @pdev: pointer to platform device handle * * Always returns 0 */ static void ufs_qcom_remove(struct platform_device *pdev) { struct ufs_hba *hba = platform_get_drvdata(pdev); pm_runtime_get_sync(&(pdev)->dev); ufshcd_remove(hba); platform_device_msi_free_irqs_all(hba->dev); } static const struct of_device_id ufs_qcom_of_match[] __maybe_unused = { { .compatible = "qcom,ufshc"}, {}, }; MODULE_DEVICE_TABLE(of, ufs_qcom_of_match); #ifdef CONFIG_ACPI static const struct acpi_device_id ufs_qcom_acpi_match[] = { { "QCOM24A5" }, { }, }; MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match); #endif static const struct dev_pm_ops ufs_qcom_pm_ops = { SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL) .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, #ifdef CONFIG_PM_SLEEP .suspend = ufshcd_system_suspend, .resume = ufshcd_system_resume, .freeze = ufshcd_system_freeze, .restore = ufshcd_system_restore, .thaw = ufshcd_system_thaw, #endif }; static struct platform_driver ufs_qcom_pltform = { .probe = ufs_qcom_probe, .remove_new = ufs_qcom_remove, .driver = { .name = "ufshcd-qcom", .pm = &ufs_qcom_pm_ops, .of_match_table = of_match_ptr(ufs_qcom_of_match), .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match), }, }; module_platform_driver(ufs_qcom_pltform); MODULE_LICENSE("GPL v2"); |