Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * This file function prototypes, data structure
4 * and definitions for all the host/station commands
5 */
6
7#ifndef _LBS_HOST_H_
8#define _LBS_HOST_H_
9
10#include "types.h"
11#include "defs.h"
12
13#define DEFAULT_AD_HOC_CHANNEL 6
14
15#define CMD_OPTION_WAITFORRSP 0x0002
16
17/* Host command IDs */
18
19/*
20 * Return command are almost always the same as the host command, but with
21 * bit 15 set high. There are a few exceptions, though...
22 */
23#define CMD_RET(cmd) (0x8000 | cmd)
24
25/* Return command convention exceptions: */
26#define CMD_RET_802_11_ASSOCIATE 0x8012
27
28/* Command codes */
29#define CMD_GET_HW_SPEC 0x0003
30#define CMD_EEPROM_UPDATE 0x0004
31#define CMD_802_11_RESET 0x0005
32#define CMD_802_11_SCAN 0x0006
33#define CMD_802_11_GET_LOG 0x000b
34#define CMD_MAC_MULTICAST_ADR 0x0010
35#define CMD_802_11_AUTHENTICATE 0x0011
36#define CMD_802_11_EEPROM_ACCESS 0x0059
37#define CMD_802_11_ASSOCIATE 0x0050
38#define CMD_802_11_SET_WEP 0x0013
39#define CMD_802_11_GET_STAT 0x0014
40#define CMD_802_3_GET_STAT 0x0015
41#define CMD_802_11_SNMP_MIB 0x0016
42#define CMD_MAC_REG_MAP 0x0017
43#define CMD_BBP_REG_MAP 0x0018
44#define CMD_MAC_REG_ACCESS 0x0019
45#define CMD_BBP_REG_ACCESS 0x001a
46#define CMD_RF_REG_ACCESS 0x001b
47#define CMD_802_11_RADIO_CONTROL 0x001c
48#define CMD_802_11_RF_CHANNEL 0x001d
49#define CMD_802_11_RF_TX_POWER 0x001e
50#define CMD_802_11_RSSI 0x001f
51#define CMD_802_11_RF_ANTENNA 0x0020
52#define CMD_802_11_PS_MODE 0x0021
53#define CMD_802_11_DATA_RATE 0x0022
54#define CMD_RF_REG_MAP 0x0023
55#define CMD_802_11_DEAUTHENTICATE 0x0024
56#define CMD_802_11_REASSOCIATE 0x0025
57#define CMD_MAC_CONTROL 0x0028
58#define CMD_802_11_AD_HOC_START 0x002b
59#define CMD_802_11_AD_HOC_JOIN 0x002c
60#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
61#define CMD_802_11_ENABLE_RSN 0x002f
62#define CMD_802_11_SET_AFC 0x003c
63#define CMD_802_11_GET_AFC 0x003d
64#define CMD_802_11_DEEP_SLEEP 0x003e
65#define CMD_802_11_AD_HOC_STOP 0x0040
66#define CMD_802_11_HOST_SLEEP_CFG 0x0043
67#define CMD_802_11_WAKEUP_CONFIRM 0x0044
68#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
69#define CMD_802_11_BEACON_STOP 0x0049
70#define CMD_802_11_MAC_ADDRESS 0x004d
71#define CMD_802_11_LED_GPIO_CTRL 0x004e
72#define CMD_802_11_BAND_CONFIG 0x0058
73#define CMD_GSPI_BUS_CONFIG 0x005a
74#define CMD_802_11D_DOMAIN_INFO 0x005b
75#define CMD_802_11_KEY_MATERIAL 0x005e
76#define CMD_802_11_SLEEP_PARAMS 0x0066
77#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
78#define CMD_802_11_SLEEP_PERIOD 0x0068
79#define CMD_802_11_TPC_CFG 0x0072
80#define CMD_802_11_PA_CFG 0x0073
81#define CMD_802_11_FW_WAKE_METHOD 0x0074
82#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
83#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
84#define CMD_802_11_TX_RATE_QUERY 0x007f
85#define CMD_GET_TSF 0x0080
86#define CMD_BT_ACCESS 0x0087
87#define CMD_FWT_ACCESS 0x0095
88#define CMD_802_11_MONITOR_MODE 0x0098
89#define CMD_MESH_ACCESS 0x009b
90#define CMD_MESH_CONFIG_OLD 0x00a3
91#define CMD_MESH_CONFIG 0x00ac
92#define CMD_SET_BOOT2_VER 0x00a5
93#define CMD_FUNC_INIT 0x00a9
94#define CMD_FUNC_SHUTDOWN 0x00aa
95#define CMD_802_11_BEACON_CTRL 0x00b0
96
97/* For the IEEE Power Save */
98#define PS_MODE_ACTION_ENTER_PS 0x0030
99#define PS_MODE_ACTION_EXIT_PS 0x0031
100#define PS_MODE_ACTION_SLEEP_CONFIRMED 0x0034
101
102#define CMD_ENABLE_RSN 0x0001
103#define CMD_DISABLE_RSN 0x0000
104
105#define CMD_ACT_GET 0x0000
106#define CMD_ACT_SET 0x0001
107
108/* Define action or option for CMD_802_11_SET_WEP */
109#define CMD_ACT_ADD 0x0002
110#define CMD_ACT_REMOVE 0x0004
111
112#define CMD_TYPE_WEP_40_BIT 0x01
113#define CMD_TYPE_WEP_104_BIT 0x02
114
115#define CMD_NUM_OF_WEP_KEYS 4
116
117#define CMD_WEP_KEY_INDEX_MASK 0x3fff
118
119/* Define action or option for CMD_802_11_SCAN */
120#define CMD_BSS_TYPE_BSS 0x0001
121#define CMD_BSS_TYPE_IBSS 0x0002
122#define CMD_BSS_TYPE_ANY 0x0003
123
124/* Define action or option for CMD_802_11_SCAN */
125#define CMD_SCAN_TYPE_ACTIVE 0x0000
126#define CMD_SCAN_TYPE_PASSIVE 0x0001
127
128#define CMD_SCAN_RADIO_TYPE_BG 0
129
130#define CMD_SCAN_PROBE_DELAY_TIME 0
131
132/* Define action or option for CMD_MAC_CONTROL */
133#define CMD_ACT_MAC_RX_ON 0x0001
134#define CMD_ACT_MAC_TX_ON 0x0002
135#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
136#define CMD_ACT_MAC_WEP_ENABLE 0x0008
137#define CMD_ACT_MAC_INT_ENABLE 0x0010
138#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
139#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
140#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
141#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
142#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
143
144/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
145#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
146#define CMD_SUBSCRIBE_SNR_LOW 0x0002
147#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
148#define CMD_SUBSCRIBE_BCNMISS 0x0008
149#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
150#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
151
152#define RADIO_PREAMBLE_LONG 0x00
153#define RADIO_PREAMBLE_SHORT 0x02
154#define RADIO_PREAMBLE_AUTO 0x04
155
156/* Define action or option for CMD_802_11_RF_CHANNEL */
157#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
158#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
159
160/* Define action or option for CMD_802_11_DATA_RATE */
161#define CMD_ACT_SET_TX_AUTO 0x0000
162#define CMD_ACT_SET_TX_FIX_RATE 0x0001
163#define CMD_ACT_GET_TX_RATE 0x0002
164
165/* Options for CMD_802_11_FW_WAKE_METHOD */
166#define CMD_WAKE_METHOD_UNCHANGED 0x0000
167#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
168#define CMD_WAKE_METHOD_GPIO 0x0002
169
170/* Object IDs for CMD_802_11_SNMP_MIB */
171#define SNMP_MIB_OID_BSS_TYPE 0x0000
172#define SNMP_MIB_OID_OP_RATE_SET 0x0001
173#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
174#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
175#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
176#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
177#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
178#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
179#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
180#define SNMP_MIB_OID_11D_ENABLE 0x0009
181#define SNMP_MIB_OID_11H_ENABLE 0x000A
182
183/* Define action or option for CMD_BT_ACCESS */
184enum cmd_bt_access_opts {
185 /* The bt commands start at 5 instead of 1 because the old dft commands
186 * are mapped to 1-4. These old commands are no longer maintained and
187 * should not be called.
188 */
189 CMD_ACT_BT_ACCESS_ADD = 5,
190 CMD_ACT_BT_ACCESS_DEL,
191 CMD_ACT_BT_ACCESS_LIST,
192 CMD_ACT_BT_ACCESS_RESET,
193 CMD_ACT_BT_ACCESS_SET_INVERT,
194 CMD_ACT_BT_ACCESS_GET_INVERT
195};
196
197/* Define action or option for CMD_FWT_ACCESS */
198enum cmd_fwt_access_opts {
199 CMD_ACT_FWT_ACCESS_ADD = 1,
200 CMD_ACT_FWT_ACCESS_DEL,
201 CMD_ACT_FWT_ACCESS_LOOKUP,
202 CMD_ACT_FWT_ACCESS_LIST,
203 CMD_ACT_FWT_ACCESS_LIST_ROUTE,
204 CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
205 CMD_ACT_FWT_ACCESS_RESET,
206 CMD_ACT_FWT_ACCESS_CLEANUP,
207 CMD_ACT_FWT_ACCESS_TIME,
208};
209
210/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
211enum cmd_wol_cfg_opts {
212 CMD_ACT_ACTION_NONE = 0,
213 CMD_ACT_SET_WOL_RULE,
214 CMD_ACT_GET_WOL_RULE,
215 CMD_ACT_RESET_WOL_RULE,
216};
217
218/* Define action or option for CMD_MESH_ACCESS */
219enum cmd_mesh_access_opts {
220 CMD_ACT_MESH_GET_TTL = 1,
221 CMD_ACT_MESH_SET_TTL,
222 CMD_ACT_MESH_GET_STATS,
223 CMD_ACT_MESH_GET_ANYCAST,
224 CMD_ACT_MESH_SET_ANYCAST,
225 CMD_ACT_MESH_SET_LINK_COSTS,
226 CMD_ACT_MESH_GET_LINK_COSTS,
227 CMD_ACT_MESH_SET_BCAST_RATE,
228 CMD_ACT_MESH_GET_BCAST_RATE,
229 CMD_ACT_MESH_SET_RREQ_DELAY,
230 CMD_ACT_MESH_GET_RREQ_DELAY,
231 CMD_ACT_MESH_SET_ROUTE_EXP,
232 CMD_ACT_MESH_GET_ROUTE_EXP,
233 CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
234 CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
235 CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
236};
237
238/* Define actions and types for CMD_MESH_CONFIG */
239enum cmd_mesh_config_actions {
240 CMD_ACT_MESH_CONFIG_STOP = 0,
241 CMD_ACT_MESH_CONFIG_START,
242 CMD_ACT_MESH_CONFIG_SET,
243 CMD_ACT_MESH_CONFIG_GET,
244};
245
246enum cmd_mesh_config_types {
247 CMD_TYPE_MESH_SET_BOOTFLAG = 1,
248 CMD_TYPE_MESH_SET_BOOTTIME,
249 CMD_TYPE_MESH_SET_DEF_CHANNEL,
250 CMD_TYPE_MESH_SET_MESH_IE,
251 CMD_TYPE_MESH_GET_DEFAULTS,
252 CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
253};
254
255/* Card Event definition */
256#define MACREG_INT_CODE_TX_PPA_FREE 0
257#define MACREG_INT_CODE_TX_DMA_DONE 1
258#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
259#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
260#define MACREG_INT_CODE_LINK_SENSED 4
261#define MACREG_INT_CODE_CMD_FINISHED 5
262#define MACREG_INT_CODE_MIB_CHANGED 6
263#define MACREG_INT_CODE_INIT_DONE 7
264#define MACREG_INT_CODE_DEAUTHENTICATED 8
265#define MACREG_INT_CODE_DISASSOCIATED 9
266#define MACREG_INT_CODE_PS_AWAKE 10
267#define MACREG_INT_CODE_PS_SLEEP 11
268#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
269#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
270#define MACREG_INT_CODE_WM_AWAKE 15
271#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
272#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
273#define MACREG_INT_CODE_HOST_AWAKE 18
274#define MACREG_INT_CODE_STOP_TX 19
275#define MACREG_INT_CODE_START_TX 20
276#define MACREG_INT_CODE_CHANNEL_SWITCH 21
277#define MACREG_INT_CODE_MEASUREMENT_RDY 22
278#define MACREG_INT_CODE_WMM_CHANGE 23
279#define MACREG_INT_CODE_BG_SCAN_REPORT 24
280#define MACREG_INT_CODE_RSSI_LOW 25
281#define MACREG_INT_CODE_SNR_LOW 26
282#define MACREG_INT_CODE_MAX_FAIL 27
283#define MACREG_INT_CODE_RSSI_HIGH 28
284#define MACREG_INT_CODE_SNR_HIGH 29
285#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
286#define MACREG_INT_CODE_FIRMWARE_READY 48
287
288
289/* 802.11-related definitions */
290
291/* TxPD descriptor */
292struct txpd {
293 /* union to cope up with later FW revisions */
294 union {
295 /* Current Tx packet status */
296 __le32 tx_status;
297 struct {
298 /* BSS type: client, AP, etc. */
299 u8 bss_type;
300 /* BSS number */
301 u8 bss_num;
302 /* Reserved */
303 __le16 reserved;
304 } bss;
305 } u;
306 /* Tx control */
307 __le32 tx_control;
308 __le32 tx_packet_location;
309 /* Tx packet length */
310 __le16 tx_packet_length;
311 struct_group_attr(tx_dest_addr, __packed,
312 /* First 2 byte of destination MAC address */
313 u8 tx_dest_addr_high[2];
314 /* Last 4 byte of destination MAC address */
315 u8 tx_dest_addr_low[4];
316 );
317 /* Pkt Priority */
318 u8 priority;
319 /* Pkt Trasnit Power control */
320 u8 powermgmt;
321 /* Amount of time the packet has been queued (units = 2ms) */
322 u8 pktdelay_2ms;
323 /* reserved */
324 u8 reserved1;
325} __packed;
326
327/* RxPD Descriptor */
328struct rxpd {
329 /* union to cope up with later FW revisions */
330 union {
331 /* Current Rx packet status */
332 __le16 status;
333 struct {
334 /* BSS type: client, AP, etc. */
335 u8 bss_type;
336 /* BSS number */
337 u8 bss_num;
338 } __packed bss;
339 } __packed u;
340
341 /* SNR */
342 u8 snr;
343
344 /* Tx control */
345 u8 rx_control;
346
347 /* Pkt length */
348 __le16 pkt_len;
349
350 /* Noise Floor */
351 u8 nf;
352
353 /* Rx Packet Rate */
354 u8 rx_rate;
355
356 /* Pkt addr */
357 __le32 pkt_ptr;
358
359 /* Next Rx RxPD addr */
360 __le32 next_rxpd_ptr;
361
362 /* Pkt Priority */
363 u8 priority;
364 u8 reserved[3];
365} __packed;
366
367struct cmd_header {
368 __le16 command;
369 __le16 size;
370 __le16 seqnum;
371 __le16 result;
372} __packed;
373
374/* Generic structure to hold all key types. */
375struct enc_key {
376 u16 len;
377 u16 flags; /* KEY_INFO_* from defs.h */
378 u16 type; /* KEY_TYPE_* from defs.h */
379 u8 key[32];
380};
381
382/* lbs_offset_value */
383struct lbs_offset_value {
384 u32 offset;
385 u32 value;
386} __packed;
387
388#define MAX_11D_TRIPLETS 83
389
390struct mrvl_ie_domain_param_set {
391 struct mrvl_ie_header header;
392
393 u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
394 struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
395} __packed;
396
397struct cmd_ds_802_11d_domain_info {
398 struct cmd_header hdr;
399
400 __le16 action;
401 struct mrvl_ie_domain_param_set domain;
402} __packed;
403
404/*
405 * Define data structure for CMD_GET_HW_SPEC
406 * This structure defines the response for the GET_HW_SPEC command
407 */
408struct cmd_ds_get_hw_spec {
409 struct cmd_header hdr;
410
411 /* HW Interface version number */
412 __le16 hwifversion;
413 /* HW version number */
414 __le16 version;
415 /* Max number of TxPD FW can handle */
416 __le16 nr_txpd;
417 /* Max no of Multicast address */
418 __le16 nr_mcast_adr;
419 /* MAC address */
420 u8 permanentaddr[6];
421
422 /* region Code */
423 __le16 regioncode;
424
425 /* Number of antenna used */
426 __le16 nr_antenna;
427
428 /* FW release number, example 0x01030304 = 2.3.4p1 */
429 __le32 fwrelease;
430
431 /* Base Address of TxPD queue */
432 __le32 wcb_base;
433 /* Read Pointer of RxPd queue */
434 __le32 rxpd_rdptr;
435
436 /* Write Pointer of RxPd queue */
437 __le32 rxpd_wrptr;
438
439 /*FW/HW capability */
440 __le32 fwcapinfo;
441} __packed;
442
443struct cmd_ds_802_11_subscribe_event {
444 struct cmd_header hdr;
445
446 __le16 action;
447 __le16 events;
448
449 /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
450 * number of TLVs. From the v5.1 manual, those TLVs would add up to
451 * 40 bytes. However, future firmware might add additional TLVs, so I
452 * bump this up a bit.
453 */
454 uint8_t tlv[128];
455} __packed;
456
457/*
458 * This scan handle Country Information IE(802.11d compliant)
459 * Define data structure for CMD_802_11_SCAN
460 */
461struct cmd_ds_802_11_scan {
462 struct cmd_header hdr;
463
464 uint8_t bsstype;
465 uint8_t bssid[ETH_ALEN];
466 uint8_t tlvbuffer[];
467} __packed;
468
469struct cmd_ds_802_11_scan_rsp {
470 struct cmd_header hdr;
471
472 __le16 bssdescriptsize;
473 uint8_t nr_sets;
474 uint8_t bssdesc_and_tlvbuffer[];
475} __packed;
476
477struct cmd_ds_802_11_get_log {
478 struct cmd_header hdr;
479
480 __le32 mcasttxframe;
481 __le32 failed;
482 __le32 retry;
483 __le32 multiretry;
484 __le32 framedup;
485 __le32 rtssuccess;
486 __le32 rtsfailure;
487 __le32 ackfailure;
488 __le32 rxfrag;
489 __le32 mcastrxframe;
490 __le32 fcserror;
491 __le32 txframe;
492 __le32 wepundecryptable;
493} __packed;
494
495struct cmd_ds_mac_control {
496 struct cmd_header hdr;
497 __le16 action;
498 u16 reserved;
499} __packed;
500
501struct cmd_ds_mac_multicast_adr {
502 struct cmd_header hdr;
503 __le16 action;
504 __le16 nr_of_adrs;
505 u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
506} __packed;
507
508struct cmd_ds_802_11_authenticate {
509 struct cmd_header hdr;
510
511 u8 bssid[ETH_ALEN];
512 u8 authtype;
513 u8 reserved[10];
514} __packed;
515
516struct cmd_ds_802_11_deauthenticate {
517 struct cmd_header hdr;
518
519 u8 macaddr[ETH_ALEN];
520 __le16 reasoncode;
521} __packed;
522
523struct cmd_ds_802_11_associate {
524 struct cmd_header hdr;
525
526 u8 bssid[6];
527 __le16 capability;
528 __le16 listeninterval;
529 __le16 bcnperiod;
530 u8 dtimperiod;
531 /* 512 permitted - enough for required and most optional IEs */
532 u8 iebuf[];
533} __packed;
534
535struct cmd_ds_802_11_associate_response {
536 struct cmd_header hdr;
537
538 __le16 capability;
539 __le16 statuscode;
540 __le16 aid;
541 /* max 512 */
542 u8 iebuf[];
543} __packed;
544
545struct cmd_ds_802_11_set_wep {
546 struct cmd_header hdr;
547
548 /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
549 __le16 action;
550
551 /* key Index selected for Tx */
552 __le16 keyindex;
553
554 /* 40, 128bit or TXWEP */
555 uint8_t keytype[4];
556 uint8_t keymaterial[4][16];
557} __packed;
558
559struct cmd_ds_802_11_snmp_mib {
560 struct cmd_header hdr;
561
562 __le16 action;
563 __le16 oid;
564 __le16 bufsize;
565 u8 value[128];
566} __packed;
567
568struct cmd_ds_reg_access {
569 struct cmd_header hdr;
570
571 __le16 action;
572 __le16 offset;
573 union {
574 u8 bbp_rf; /* for BBP and RF registers */
575 __le32 mac; /* for MAC registers */
576 } value;
577} __packed;
578
579struct cmd_ds_802_11_radio_control {
580 struct cmd_header hdr;
581
582 __le16 action;
583 __le16 control;
584} __packed;
585
586struct cmd_ds_802_11_beacon_control {
587 struct cmd_header hdr;
588
589 __le16 action;
590 __le16 beacon_enable;
591 __le16 beacon_period;
592} __packed;
593
594struct cmd_ds_802_11_sleep_params {
595 struct cmd_header hdr;
596
597 /* ACT_GET/ACT_SET */
598 __le16 action;
599
600 /* Sleep clock error in ppm */
601 __le16 error;
602
603 /* Wakeup offset in usec */
604 __le16 offset;
605
606 /* Clock stabilization time in usec */
607 __le16 stabletime;
608
609 /* control periodic calibration */
610 uint8_t calcontrol;
611
612 /* control the use of external sleep clock */
613 uint8_t externalsleepclk;
614
615 /* reserved field, should be set to zero */
616 __le16 reserved;
617} __packed;
618
619struct cmd_ds_802_11_rf_channel {
620 struct cmd_header hdr;
621
622 __le16 action;
623 __le16 channel;
624 __le16 rftype; /* unused */
625 __le16 reserved; /* unused */
626 u8 channellist[32]; /* unused */
627} __packed;
628
629struct cmd_ds_802_11_rssi {
630 struct cmd_header hdr;
631
632 /*
633 * request: number of beacons (N) to average the SNR and NF over
634 * response: SNR of most recent beacon
635 */
636 __le16 n_or_snr;
637
638 /*
639 * The following fields are only set in the response.
640 * In the request these are reserved and should be set to 0.
641 */
642 __le16 nf; /* most recent beacon noise floor */
643 __le16 avg_snr; /* average SNR weighted by N from request */
644 __le16 avg_nf; /* average noise floor weighted by N from request */
645} __packed;
646
647struct cmd_ds_802_11_mac_address {
648 struct cmd_header hdr;
649
650 __le16 action;
651 u8 macadd[ETH_ALEN];
652} __packed;
653
654struct cmd_ds_802_11_rf_tx_power {
655 struct cmd_header hdr;
656
657 __le16 action;
658 __le16 curlevel;
659 s8 maxlevel;
660 s8 minlevel;
661} __packed;
662
663/* MONITOR_MODE only exists in OLPC v5 firmware */
664struct cmd_ds_802_11_monitor_mode {
665 struct cmd_header hdr;
666
667 __le16 action;
668 __le16 mode;
669} __packed;
670
671struct cmd_ds_set_boot2_ver {
672 struct cmd_header hdr;
673
674 __le16 action;
675 __le16 version;
676} __packed;
677
678struct cmd_ds_802_11_fw_wake_method {
679 struct cmd_header hdr;
680
681 __le16 action;
682 __le16 method;
683} __packed;
684
685struct cmd_ds_802_11_ps_mode {
686 struct cmd_header hdr;
687
688 __le16 action;
689
690 /*
691 * Interval for keepalive in PS mode:
692 * 0x0000 = don't change
693 * 0x001E = firmware default
694 * 0xFFFF = disable
695 */
696 __le16 nullpktinterval;
697
698 /*
699 * Number of DTIM intervals to wake up for:
700 * 0 = don't change
701 * 1 = firmware default
702 * 5 = max
703 */
704 __le16 multipledtim;
705
706 __le16 reserved;
707 __le16 locallisteninterval;
708
709 /*
710 * AdHoc awake period (FW v9+ only):
711 * 0 = don't change
712 * 1 = always awake (IEEE standard behavior)
713 * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
714 * 32 - 254 = invalid
715 * 255 = sleep at each ATIM
716 */
717 __le16 adhoc_awake_period;
718} __packed;
719
720struct cmd_confirm_sleep {
721 struct cmd_header hdr;
722
723 __le16 action;
724 __le16 nullpktinterval;
725 __le16 multipledtim;
726 __le16 reserved;
727 __le16 locallisteninterval;
728} __packed;
729
730struct cmd_ds_802_11_data_rate {
731 struct cmd_header hdr;
732
733 __le16 action;
734 __le16 reserved;
735 u8 rates[MAX_RATES];
736} __packed;
737
738struct cmd_ds_802_11_rate_adapt_rateset {
739 struct cmd_header hdr;
740 __le16 action;
741 __le16 enablehwauto;
742 __le16 bitmap;
743} __packed;
744
745struct cmd_ds_802_11_ad_hoc_start {
746 struct cmd_header hdr;
747
748 u8 ssid[IEEE80211_MAX_SSID_LEN];
749 u8 bsstype;
750 __le16 beaconperiod;
751 u8 dtimperiod; /* Reserved on v9 and later */
752 struct ieee_ie_ibss_param_set ibss;
753 u8 reserved1[4];
754 struct ieee_ie_ds_param_set ds;
755 u8 reserved2[4];
756 __le16 probedelay; /* Reserved on v9 and later */
757 __le16 capability;
758 u8 rates[MAX_RATES];
759 u8 tlv_memory_size_pad[100];
760} __packed;
761
762struct cmd_ds_802_11_ad_hoc_result {
763 struct cmd_header hdr;
764
765 u8 pad[3];
766 u8 bssid[ETH_ALEN];
767} __packed;
768
769struct adhoc_bssdesc {
770 u8 bssid[ETH_ALEN];
771 u8 ssid[IEEE80211_MAX_SSID_LEN];
772 u8 type;
773 __le16 beaconperiod;
774 u8 dtimperiod;
775 __le64 timestamp;
776 __le64 localtime;
777 struct ieee_ie_ds_param_set ds;
778 u8 reserved1[4];
779 struct ieee_ie_ibss_param_set ibss;
780 u8 reserved2[4];
781 __le16 capability;
782 u8 rates[MAX_RATES];
783
784 /*
785 * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
786 * Adhoc join command and will cause a binary layout mismatch with
787 * the firmware
788 */
789} __packed;
790
791struct cmd_ds_802_11_ad_hoc_join {
792 struct cmd_header hdr;
793
794 struct adhoc_bssdesc bss;
795 __le16 failtimeout; /* Reserved on v9 and later */
796 __le16 probedelay; /* Reserved on v9 and later */
797} __packed;
798
799struct cmd_ds_802_11_ad_hoc_stop {
800 struct cmd_header hdr;
801} __packed;
802
803struct cmd_ds_802_11_enable_rsn {
804 struct cmd_header hdr;
805
806 __le16 action;
807 __le16 enable;
808} __packed;
809
810struct MrvlIEtype_keyParamSet {
811 /* type ID */
812 __le16 type;
813
814 /* length of Payload */
815 __le16 length;
816
817 /* type of key: WEP=0, TKIP=1, AES=2 */
818 __le16 keytypeid;
819
820 /* key control Info specific to a keytypeid */
821 __le16 keyinfo;
822
823 /* length of key */
824 __le16 keylen;
825
826 /* key material of size keylen */
827 u8 key[32];
828} __packed;
829
830#define MAX_WOL_RULES 16
831
832struct host_wol_rule {
833 uint8_t rule_no;
834 uint8_t rule_ops;
835 __le16 sig_offset;
836 __le16 sig_length;
837 __le16 reserve;
838 __be32 sig_mask;
839 __be32 signature;
840} __packed;
841
842struct wol_config {
843 uint8_t action;
844 uint8_t pattern;
845 uint8_t no_rules_in_cmd;
846 uint8_t result;
847 struct host_wol_rule rule[MAX_WOL_RULES];
848} __packed;
849
850struct cmd_ds_host_sleep {
851 struct cmd_header hdr;
852 __le32 criteria;
853 uint8_t gpio;
854 uint16_t gap;
855 struct wol_config wol_conf;
856} __packed;
857
858
859
860struct cmd_ds_802_11_key_material {
861 struct cmd_header hdr;
862
863 __le16 action;
864 struct MrvlIEtype_keyParamSet keyParamSet[2];
865} __packed;
866
867struct cmd_ds_802_11_eeprom_access {
868 struct cmd_header hdr;
869 __le16 action;
870 __le16 offset;
871 __le16 len;
872 /* firmware says it returns a maximum of 20 bytes */
873#define LBS_EEPROM_READ_LEN 20
874 u8 value[LBS_EEPROM_READ_LEN];
875} __packed;
876
877struct cmd_ds_802_11_tpc_cfg {
878 struct cmd_header hdr;
879
880 __le16 action;
881 uint8_t enable;
882 int8_t P0;
883 int8_t P1;
884 int8_t P2;
885 uint8_t usesnr;
886} __packed;
887
888
889struct cmd_ds_802_11_pa_cfg {
890 struct cmd_header hdr;
891
892 __le16 action;
893 uint8_t enable;
894 int8_t P0;
895 int8_t P1;
896 int8_t P2;
897} __packed;
898
899
900struct cmd_ds_802_11_led_ctrl {
901 struct cmd_header hdr;
902
903 __le16 action;
904 __le16 numled;
905 u8 data[256];
906} __packed;
907
908/* Automatic Frequency Control */
909struct cmd_ds_802_11_afc {
910 struct cmd_header hdr;
911
912 __le16 afc_auto;
913 union {
914 struct {
915 __le16 threshold;
916 __le16 period;
917 };
918 struct {
919 __le16 timing_offset; /* signed */
920 __le16 carrier_offset; /* signed */
921 };
922 };
923} __packed;
924
925struct cmd_tx_rate_query {
926 __le16 txrate;
927} __packed;
928
929struct cmd_ds_get_tsf {
930 __le64 tsfvalue;
931} __packed;
932
933struct cmd_ds_bt_access {
934 struct cmd_header hdr;
935
936 __le16 action;
937 __le32 id;
938 u8 addr1[ETH_ALEN];
939 u8 addr2[ETH_ALEN];
940} __packed;
941
942struct cmd_ds_fwt_access {
943 struct cmd_header hdr;
944
945 __le16 action;
946 __le32 id;
947 u8 valid;
948 u8 da[ETH_ALEN];
949 u8 dir;
950 u8 ra[ETH_ALEN];
951 __le32 ssn;
952 __le32 dsn;
953 __le32 metric;
954 u8 rate;
955 u8 hopcount;
956 u8 ttl;
957 __le32 expiration;
958 u8 sleepmode;
959 __le32 snr;
960 __le32 references;
961 u8 prec[ETH_ALEN];
962} __packed;
963
964struct cmd_ds_mesh_config {
965 struct cmd_header hdr;
966
967 __le16 action;
968 __le16 channel;
969 __le16 type;
970 __le16 length;
971 u8 data[128]; /* last position reserved */
972} __packed;
973
974struct cmd_ds_mesh_access {
975 struct cmd_header hdr;
976
977 __le16 action;
978 __le32 data[32]; /* last position reserved */
979} __packed;
980
981/* Number of stats counters returned by the firmware */
982#define MESH_STATS_NUM 8
983#endif